[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.7.pod

Comparing rxvt-unicode/doc/rxvt.7.pod (file contents):
Revision 1.102 by root, Tue Jan 31 20:50:48 2006 UTC vs.
Revision 1.163 by ayin, Sat Jan 19 16:19:47 2008 UTC

 This document contains the FAQ, the RXVT TECHNICAL REFERENCE documenting
 all escape sequences, and other background information.
 The newest version of this document is also available on the World Wide Web at
-L<http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>.
+L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.7.pod>.
+The main manual page for @@RXVT_NAME@@ itself is available at
+L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.1.pod>.
-=head1 FREQUENTLY ASKED QUESTIONS
+=head1 RXVT-UNICODE/URXVT FREQUENTLY ASKED QUESTIONS
 =head2 Meta, Features & Commandline Issues
 =head3 My question isn't answered here, can I ask a human?
 Beginning with version 7.3, there is a perl extension that implements a
 simple tabbed terminal. It is installed by default, so any of these should
 give you tabs:
-   @@RXVT_NAME@@ -pe tabbed
+   @@URXVT_NAME@@ -pe tabbed
    URxvt.perl-ext-common: default,tabbed
 It will also work fine with tabbing functionality of many window managers
 or similar tabbing programs, and its embedding-features allow it to be
 =head3 How do I know which rxvt-unicode version I'm using?
 The version number is displayed with the usage (-h). Also the escape
 sequence C<ESC [ 8 n> sets the window title to the version number. When
-using the @@RXVT_NAME@@c client, the version displayed is that of the
+using the @@URXVT_NAME@@c client, the version displayed is that of the
 daemon.
 =head3 Rxvt-unicode uses gobs of memory, how can I reduce that?
 Rxvt-unicode tries to obey the rule of not charging you for something you
 6 bytes per screen cell. For a 160x?? window this amounts to almost a
 kilobyte per line. A scrollback buffer of 10000 lines will then (if full)
 use 10 Megabytes of memory. With C<--enable-unicode3> it gets worse, as
 rxvt-unicode then uses 8 bytes per screen cell.
-=head3 How can I start @@RXVT_NAME@@d in a race-free way?
+=head3 How can I start @@URXVT_NAME@@d in a race-free way?
-Try C<@@RXVT_NAME@@d -f -o>, which tells @@RXVT_NAME@@d to open the
+Try C<@@URXVT_NAME@@d -f -o>, which tells @@URXVT_NAME@@d to open the
 display, create the listening socket and then fork.
+=head3 How can I start @@URXVT_NAME@@d automatically when I run @@URXVT_NAME@@c?
+If you want to start @@URXVT_NAME@@d automatically whenever you run
+@@URXVT_NAME@@c and the daemon isn't running yet, use this script:
+   #!/bin/sh
+   @@URXVT_NAME@@c "$@"
+   if [ $? -eq 2 ]; then
+      @@URXVT_NAME@@d -q -o -f
+      @@URXVT_NAME@@c "$@"
+   fi
+This tries to create a new terminal, and if fails with exit status 2,
+meaning it couldn't connect to the daemon, it will start the daemon and
+re-run the command. Subsequent invocations of the script will re-use the
+existing daemon.
-=head3 How do I distinguish wether I'm running rxvt-unicode or a regular xterm? I need this to decide about setting colors etc.
+=head3 How do I distinguish whether I'm running rxvt-unicode or a regular xterm? I need this to decide about setting colors etc.
-rxvt and rxvt-unicode always export the variable "COLORTERM", so you can
+The original rxvt and rxvt-unicode always export the variable "COLORTERM",
-check and see if that is set. Note that several programs, JED, slrn,
+so you can check and see if that is set. Note that several programs, JED,
-Midnight Commander automatically check this variable to decide whether or
+slrn, Midnight Commander automatically check this variable to decide
-not to use color.
+whether or not to use color.
 =head3 How do I set the correct, full IP address for the DISPLAY variable?
 If you've compiled rxvt-unicode with DISPLAY_IS_IP and have enabled
 insecure mode then it is possible to use the following shell script
    fi
 =head3 How do I compile the manual pages on my own?
 You need to have a recent version of perl installed as F</usr/bin/perl>,
-one that comes with F<pod2man>, F<pod2text> and F<pod2html>. Then go to
+one that comes with F<pod2man>, F<pod2text> and F<pod2xhtml> (from
-the doc subdirectory and enter C<make alldoc>.
+F<Pod::Xhtml>). Then go to the doc subdirectory and enter C<make alldoc>.
 =head3 Isn't rxvt-unicode supposed to be small? Don't all those features bloat?
 I often get asked about this, and I think, no, they didn't cause extra
 bloat. If you compare a minimal rxvt and a minimal urxvt, you can see
     text    data     bss     drs     rss filename
    98398    1664      24   15695    1824 rxvt --disable-everything
   188985    9048   66616   18222    1788 urxvt --disable-everything
-When you C<--enable-everything> (which _is_ unfair, as this involves xft
+When you C<--enable-everything> (which I<is> unfair, as this involves xft
 and full locale/XIM support which are quite bloaty inside libX11 and my
-libc), the two diverge, but not unreasnobaly so.
+libc), the two diverge, but not unreasonably so.
     text    data     bss     drs     rss filename
   163431    2152      24   20123    2060 rxvt --enable-everything
  1035683   49680   66648   29096    3680 urxvt --enable-everything
 And here is rxvt-unicode:
    libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
    libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000)
    libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000)
    libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000)
    /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
 No large bloated libraries (of course, none were linked in statically),
 except maybe libX11 :)
 =head2 Rendering, Font & Look and Feel Issues
 =head3 I can't get transparency working, what am I doing wrong?
-First of all, transparency isn't officially supported in rxvt-unicode, so
+First of all, please address all transparency related issues to Sasha Vasko at
-you are mostly on your own. Do not bug the author about it (but you may
+sasha@aftercode.net and do not bug the author about it. Also, if you can't
-bug everybody else). Also, if you can't get it working consider it a rite
+get it working consider it a rite of passage: ... and you failed.
-of passage: ... and you failed.
 Here are four ways to get transparency. B<Do> read the manpage and option
 descriptions for the programs mentioned and rxvt-unicode. Really, do it!
-1. Use inheritPixmap:
+1. Use transparent mode:
    Esetroot wallpaper.jpg
-   @@RXVT_NAME@@ -ip -tint red -sh 40
+   @@URXVT_NAME@@ -tr -tint red -sh 40
 That works. If you think it doesn't, you lack transparency and tinting
 support, or you are unable to read.
 2. Use a simple pixmap and emulate pseudo-transparency. This enables you
 to use effects other than tinting and shading: Just shade/tint/whatever
 your picture with gimp or any other tool:
-   convert wallpaper.jpg -blur 20x20 -modulate 30 background.xpm
+   convert wallpaper.jpg -blur 20x20 -modulate 30 background.jpg
-   @@RXVT_NAME@@ -pixmap background.xpm -pe automove-background
+   @@URXVT_NAME@@ -pixmap "background.jpg;:root"
-That works. If you think it doesn't, you lack XPM and Perl support, or you
+That works. If you think it doesn't, you lack AfterImage support, or you
 are unable to read.
 3. Use an ARGB visual:
-   @@RXVT_NAME@@ -depth 32 -fg grey90 -bg rgba:0000/0000/4444/cccc
+   @@URXVT_NAME@@ -depth 32 -fg grey90 -bg rgba:0000/0000/4444/cccc
 This requires XFT support, and the support of your X-server. If that
 doesn't work for you, blame Xorg and Keith Packard. ARGB visuals aren't
-there yet, no matter what they claim. Rxvt-Unicode contains the neccessary
+there yet, no matter what they claim. Rxvt-Unicode contains the necessary
 bugfixes and workarounds for Xft and Xlib to make it work, but that
 doesn't mean that your WM has the required kludges in place.
 4. Use xcompmgr and let it do the job:
         -set _NET_WM_WINDOW_OPACITY 0xc0000000
 Then click on a window you want to make transparent. Replace C<0xc0000000>
 by other values to change the degree of opacity. If it doesn't work and
 your server crashes, you got to keep the pieces.
-=head3 Why do some chinese characters look so different than others?
-This is because there is a difference between script and language --
-rxvt-unicode does not know which language the text that is output is,
-as it only knows the unicode character codes. If rxvt-unicode first
-sees a japanese/chinese character, it might choose a japanese font for
-display. Subsequent japanese characters will use that font. Now, many
-chinese characters aren't represented in japanese fonts, so when the first
-non-japanese character comes up, rxvt-unicode will look for a chinese font
--- unfortunately at this point, it will still use the japanese font for
-chinese characters that are also in the japanese font.
-The workaround is easy: just tag a chinese font at the end of your font
-list (see the previous question). The key is to view the font list as
-a preference list: If you expect more japanese, list a japanese font
-first. If you expect more chinese, put a chinese font first.
-In the future it might be possible to switch language preferences at
-runtime (the internal data structure has no problem with using different
-fonts for the same character at the same time, but no interface for this
-has been designed yet).
-Until then, you might get away with switching fonts at runtime (see L<Can
-I switch the fonts at runtime?> later in this document).
 =head3 Why does rxvt-unicode sometimes leave pixel droppings?
 Most fonts were not designed for terminal use, which means that character
 size varies a lot. A font that is otherwise fine for terminal use might
 however: Xft fonts often draw glyphs larger than their acclaimed bounding
 box, and rxvt-unicode has no way of detecting this (the correct way is to
 ask for the character bounding box, which unfortunately is wrong in these
 cases).
-It's not clear (to me at least), wether this is a bug in Xft, freetype,
+It's not clear (to me at least), whether this is a bug in Xft, freetype,
 or the respective font. If you encounter this problem you might try using
 the C<-lsp> option to give the font more height. If that doesn't work, you
 might be forced to use a different font.
 All of this is not a problem when using X11 core fonts, as their bounding
 =head3 Can I switch the fonts at runtime?
 Yes, using an escape sequence. Try something like this, which has the same
 effect as using the C<-fn> switch, and takes effect immediately:
-   printf '\e]50;%s\007' "9x15bold,xft:Kochi Gothic"
+   printf '\33]50;%s\007' "9x15bold,xft:Kochi Gothic"
 This is useful if you e.g. work primarily with japanese (and prefer a
 japanese font), but you have to switch to chinese temporarily, where
 japanese fonts would only be in your way.
 =head3 Why do italic characters look as if clipped?
 Many fonts have difficulties with italic characters and hinting. For
 example, the otherwise very nicely hinted font C<xft:Bitstream Vera Sans
-Mono> completely fails in it's italic face. A workaround might be to
+Mono> completely fails in its italic face. A workaround might be to
 enable freetype autohinting, i.e. like this:
    URxvt.italicFont:        xft:Bitstream Vera Sans Mono:italic:autohint=true
    URxvt.boldItalicFont:    xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
 memory and also speeds up rendering considerably.
 =head3 Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?
 Rxvt-unicode will use whatever you specify as a font. If it needs to
-fall back to it's default font search list it will prefer X11 core
+fall back to its default font search list it will prefer X11 core
 fonts, because they are small and fast, and then use Xft fonts. It has
 antialiasing disabled for most of them, because the author thinks they
 look best that way.
 If you want antialiasing, you have to specify the fonts manually.
 =head3 What's with this bold/blink stuff?
 If no bold colour is set via C<colorBD:>, bold will invert text using the
 standard foreground colour.
-For the standard background colour, blinking will actually make the
+For the standard background colour, blinking will actually make
-text blink when compiled with C<--enable-blinking>. with standard
+the text blink when compiled with C<--enable-text-blink>. Without
-colours. Without C<--enable-blinking>, the blink attribute will be
+C<--enable-text-blink>, the blink attribute will be ignored.
-ignored.
 On ANSI colours, bold/blink attributes are used to set high-intensity
 foreground/background colors.
 color0-7 are the low-intensity colors.
    URxvt.color12:  #0000FF
    URxvt.color13:  #FF00FF
    URxvt.color14:  #00FFFF
    URxvt.color15:  #FFFFFF
-And here is a more complete set of non-standard colors described (not by
+And here is a more complete set of non-standard colors.
-me) as "pretty girly".
    URxvt.cursorColor:  #dc74d1
    URxvt.pointerColor: #dc74d1
    URxvt.background:   #0e0e0e
    URxvt.foreground:   #4ad5e1
    URxvt.color6:       #73f7ff
    URxvt.color14:      #73f7ff
    URxvt.color7:       #e1dddd
    URxvt.color15:      #e1dddd
+They have been described (not by me) as "pretty girly".
 =head3 Why do some characters look so much different than others?
 See next entry.
 =head3 How does rxvt-unicode choose fonts?
 Most fonts do not contain the full range of Unicode, which is
 fine. Chances are that the font you (or the admin/package maintainer of
 your system/os) have specified does not cover all the characters you want
 to display.
 B<rxvt-unicode> makes a best-effort try at finding a replacement
 font. Often the result is fine, but sometimes the chosen font looks
 bad/ugly/wrong. Some fonts have totally strange characters that don't
 resemble the correct glyph at all, and rxvt-unicode lacks the artificial
 intelligence to detect that a specific glyph is wrong: it has to believe
 the font that the characters it claims to contain indeed look correct.
 In that case, select a font of your taste and add it to the font list,
 e.g.:
-   @@RXVT_NAME@@ -fn basefont,font2,font3...
+   @@URXVT_NAME@@ -fn basefont,font2,font3...
 When rxvt-unicode sees a character, it will first look at the base
 font. If the base font does not contain the character, it will go to the
 next font, and so on. Specifying your own fonts will also speed up this
 search and use less resources within rxvt-unicode and the X-server.
 The only limitation is that none of the fonts may be larger than the base
 font, as the base font defines the terminal character cell size, which
 must be the same due to the way terminals work.
+=head3 Why do some chinese characters look so different than others?
+This is because there is a difference between script and language --
+rxvt-unicode does not know which language the text that is output is,
+as it only knows the unicode character codes. If rxvt-unicode first
+sees a japanese/chinese character, it might choose a japanese font for
+display. Subsequent japanese characters will use that font. Now, many
+chinese characters aren't represented in japanese fonts, so when the first
+non-japanese character comes up, rxvt-unicode will look for a chinese font
+-- unfortunately at this point, it will still use the japanese font for
+chinese characters that are also in the japanese font.
+The workaround is easy: just tag a chinese font at the end of your font
+list (see the previous question). The key is to view the font list as
+a preference list: If you expect more japanese, list a japanese font
+first. If you expect more chinese, put a chinese font first.
+In the future it might be possible to switch language preferences at
+runtime (the internal data structure has no problem with using different
+fonts for the same character at the same time, but no interface for this
+has been designed yet).
+Until then, you might get away with switching fonts at runtime (see L<Can
+I switch the fonts at runtime?> later in this document).
+=head3 How can I make mplayer display video correctly?
+We are working on it, in the meantime, as a workaround, use something like:
+   @@URXVT_NAME@@ -b 600 -geometry 20x1 -e sh -c 'mplayer -wid $WINDOWID file...'
 =head2 Keyboard, Mouse & User Interaction
 =head3 The new selection selects pieces that are too big, how can I select single words?
 To get a selection that is very similar to the old code, try this pattern:
    URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\\\\]^`{|})]+)
-Please also note that the I<LeftClick Shift-LeftClik> combination also
+Please also note that the I<LeftClick Shift-LeftClick> combination also
 selects words like the old code.
 =head3 I don't like the new selection/popups/hotkeys/perl, how do I change/disable it?
 You can disable the perl extension completely by setting the
 B<perl-ext-common> resource to the empty string, which also keeps
 rxvt-unicode from initialising perl, saving memory.
 If you only want to disable specific features, you first have to
 identify which perl extension is responsible. For this, read the section
-B<PREPACKAGED EXTENSIONS> in the @@RXVT_NAME@@perl(3) manpage. For
+B<PREPACKAGED EXTENSIONS> in the @@URXVT_NAME@@perl(3) manpage. For
 example, to disable the B<selection-popup> and B<option-popup>, specify
 this B<perl-ext-common> resource:
    URxvt.perl-ext-common: default,-selection-popup,-option-popup
 circumstances, it will move your cursor around when you click into the
 line that contains it. It tries hard not to do this at the wrong moment,
 but when running a program that doesn't parse cursor movements or in some
 cases during rlogin sessions, it fails to detect this properly.
-You can permamently switch this feature off by disabling the C<readline>
+You can permanently switch this feature off by disabling the C<readline>
 extension:
    URxvt.perl-ext-common: default,-readline
 =head3 My numerical keypad acts weird and generates differing output?
 Some Debian GNUL/Linux users seem to have this problem, although no
 specific details were reported so far. It is possible that this is caused
-by the wrong C<TERM> setting, although the details of wether and how
+by the wrong C<TERM> setting, although the details of whether and how
 this can happen are unknown, as C<TERM=rxvt> should offer a compatible
 keymap. See the answer to the previous question, and please report if that
 helped.
 =head3 My Compose (Multi_key) key is no longer working.
 depressed.
 =head3 What's with the strange Backspace/Delete key behaviour?
 Assuming that the physical Backspace key corresponds to the
-BackSpace keysym (not likely for Linux ... see the following
+Backspace keysym (not likely for Linux ... see the following
 question) there are two standard values that can be used for
 Backspace: C<^H> and C<^?>.
 Historically, either value is correct, but rxvt-unicode adopts the debian
-policy of using C<^?> when unsure, because it's the one only only correct
+policy of using C<^?> when unsure, because it's the one and only correct
 choice :).
 Rxvt-unicode tries to inherit the current stty settings and uses the value
 of `erase' to guess the value for backspace.  If rxvt-unicode wasn't
 started from a terminal (say, from a menu or by remote shell), then the
 For starting a new rxvt-unicode:
    # use Backspace = ^H
    $ stty erase ^H
-   $ @@RXVT_NAME@@
+   $ @@URXVT_NAME@@
    # use Backspace = ^?
    $ stty erase ^?
-   $ @@RXVT_NAME@@
+   $ @@URXVT_NAME@@
 Toggle with C<ESC [ 36 h> / C<ESC [ 36 l>.
 For an existing rxvt-unicode:
 key has been assigned an escape sequence to match the vt100 for Execute
 (C<ESC [ 3 ~>) and is in the supplied termcap/terminfo.
 Some other Backspace problems:
 some editors use termcap/terminfo,
 some editors (vim I'm told) expect Backspace = ^H,
 GNU Emacs (and Emacs-like editors) use ^H for help.
 Perhaps someday this will all be resolved in a consistent manner.
 There are some compile-time selections available via configure. Unless
 you have run "configure" with the C<--disable-resources> option you can
 use the `keysym' resource to alter the keystrings associated with keysyms.
-Here's an example for a URxvt session started using C<@@RXVT_NAME@@ -name URxvt>
+Here's an example for a URxvt session started using C<@@URXVT_NAME@@ -name URxvt>
    URxvt.keysym.Home:          \033[1~
    URxvt.keysym.End:           \033[4~
    URxvt.keysym.C-apostrophe:  \033<C-'>
    URxvt.keysym.C-slash:       \033<C-/>
 Rather than have rxvt-unicode try to accommodate all the various possible
 keyboard mappings, it is better to use `xmodmap' to remap the keys as
 required for your particular machine.
 =head2 Terminal Configuration
+=head3 Can I see a typical configuration?
+The default configuration tries to be xterm-like, which I don't like that
+much, but it's least surprise to regular users.
+As a rxvt or rxvt-unicode user, you are practically supposed to invest
+time into customising your terminal. To get you started, here is the
+author's .Xdefaults entries, with comments on what they do. It's certainly
+not I<typical>, but what's typical...
+   URxvt.cutchars: "()*,<>[]{}|'
+   URxvt.print-pipe: cat >/tmp/xxx
+These are just for testing stuff.
+   URxvt.imLocale: ja_JP.UTF-8
+   URxvt.preeditType: OnTheSpot,None
+This tells rxvt-unicode to use a special locale when communicating with
+the X Input Method, and also tells it to only use the OnTheSpot pre-edit
+type, which requires the C<xim-onthespot> perl extension but rewards me
+with correct-looking fonts.
+   URxvt.perl-lib: /root/lib/urxvt
+   URxvt.perl-ext-common: default,selection-autotransform,selection-pastebin,xim-onthespot,remote-clipboard
+   URxvt.selection.pattern-0: ( at .*? line \\d+)
+   URxvt.selection.pattern-1: ^(/[^:]+):\
+   URxvt.selection-autotransform.0: s/^([^:[:space:]]+):(\\d+):?$/:e \\Q$1\\E\\x0d:$2\\x0d/
+   URxvt.selection-autotransform.1: s/^ at (.*?) line (\\d+)$/:e \\Q$1\\E\\x0d:$2\\x0d/
+This is my perl configuration. The first two set the perl library
+directory and also tells urxvt to use a large number of extensions. I
+develop for myself mostly, so I actually use most of the extensions I
+write.
+The selection stuff mainly makes the selection perl-error-message aware
+and tells it to convert perl error messages into vi-commands to load the
+relevant file and go tot he error line number.
+   URxvt.scrollstyle:      plain
+   URxvt.secondaryScroll:  true
+As the documentation says: plain is the preferred scrollbar for the
+author. The C<secondaryScroll> configures urxvt to scroll in full-screen
+apps, like screen, so lines scrolled out of screen end up in urxvt's
+scrollback buffer.
+   URxvt.background:       #000000
+   URxvt.foreground:       gray90
+   URxvt.color7:           gray90
+   URxvt.colorBD:          #ffffff
+   URxvt.cursorColor:      #e0e080
+   URxvt.throughColor:     #8080f0
+   URxvt.highlightColor:   #f0f0f0
+Some colours. Not sure which ones are being used or even non-defaults, but
+these are in my .Xdefaults. Most notably, they set foreground/background
+to light gray/black, and also make sure that the colour 7 matches the
+default foreground colour.
+   URxvt.underlineColor:   yellow
+Another colour, makes underline lines look different. Sometimes hurts, but
+is mostly a nice effect.
+   URxvt.geometry:         154x36
+   URxvt.loginShell:       false
+   URxvt.meta:             ignore
+   URxvt.utmpInhibit:      true
+Uh, well, should be mostly self-explanatory. By specifying some defaults
+manually, I can quickly switch them for testing.
+   URxvt.saveLines:        8192
+A large scrollback buffer is essential. Really.
+   URxvt.mapAlert:         true
+The only case I use it is for my IRC window, which I like to keep
+iconified till people msg me (which beeps).
+   URxvt.visualBell:       true
+The audible bell is often annoying, especially when in a crowd.
+   URxvt.insecure:         true
+Please don't hack my mutt! Ooops...
+   URxvt.pastableTabs:     false
+I once thought this is a great idea.
+   urxvt.font:             9x15bold,\
+                           -misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\
+                           -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \
+                           [codeset=JISX0208]xft:Kochi Gothic, \
+                           xft:Bitstream Vera Sans Mono:autohint=true, \
+                           xft:Code2000:antialias=false
+   urxvt.boldFont:         -xos4-terminus-bold-r-normal--14-140-72-72-c-80-iso8859-15
+   urxvt.italicFont:       xft:Bitstream Vera Sans Mono:italic:autohint=true
+   urxvt.boldItalicFont:   xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
+I wrote rxvt-unicode to be able to specify fonts exactly. So don't be
+overwhelmed. A special note: the C<9x15bold> mentioned above is actually
+the version from XFree-3.3, as XFree-4 replaced it by a totally different
+font (different glyphs for C<;> and many other harmless characters),
+while the second font is actually the C<9x15bold> from XFree4/XOrg. The
+bold version has less chars than the medium version, so I use it for rare
+characters, too. When editing sources with vim, I use italic for comments
+and other stuff, which looks quite good with Bitstream Vera anti-aliased.
+Terminus is a quite bad font (many very wrong glyphs), but for most of my
+purposes, it works, and gives a different look, as my normal (Non-bold)
+font is already bold, and I want to see a difference between bold and
+normal fonts.
+Please note that I used the C<urxvt> instance name and not the C<URxvt>
+class name. Thats because I use different configs for different purposes,
+for example, my IRC window is started with C<-name IRC>, and uses these
+defaults:
+   IRC*title:              IRC
+   IRC*geometry:           87x12+535+542
+   IRC*saveLines:          0
+   IRC*mapAlert:           true
+   IRC*font:               suxuseuro
+   IRC*boldFont:           suxuseuro
+   IRC*colorBD:            white
+   IRC*keysym.M-C-1:       command:\033]710;suxuseuro\007\033]711;suxuseuro\007
+   IRC*keysym.M-C-2:       command:\033]710;9x15bold\007\033]711;9x15bold\007
+C<Alt-Shift-1> and C<Alt-Shift-2> switch between two different font
+sizes. C<suxuseuro> allows me to keep an eye (and actually read)
+stuff while keeping a very small window. If somebody pastes something
+complicated (e.g. japanese), I temporarily switch to a larger font.
+The above is all in my C<.Xdefaults> (I don't use C<.Xresources> nor
+C<xrdb>). I also have some resources in a separate C<.Xdefaults-hostname>
+file for different hosts, for example, on ym main desktop, I use:
+   URxvt.keysym.C-M-q: command:\033[3;5;5t
+   URxvt.keysym.C-M-y: command:\033[3;5;606t
+   URxvt.keysym.C-M-e: command:\033[3;1605;5t
+   URxvt.keysym.C-M-c: command:\033[3;1605;606t
+   URxvt.keysym.C-M-p: perl:test
+The first for keysym definitions allow me to quickly bring some windows
+in the layout I like most. Ion users might start laughing but will stop
+immediately when I tell them that I use my own Fvwm2 module for much the
+same effect as Ion provides, and I only very rarely use the above key
+combinations :->
 =head3 Why doesn't rxvt-unicode read my resources?
 Well, why, indeed? It does, in a way very similar to other X
 applications. Most importantly, this means that if you or your OS loads
 Also consider the form resources have to use:
   URxvt.resource: value
 If you want to use another form (there are lots of different ways of
-specifying resources), make sure you understand wether and why it
+specifying resources), make sure you understand whether and why it
 works. If unsure, use the form above.
 =head3 When I log-in to another system it tells me about missing terminfo data?
 The terminal description used by rxvt-unicode is not as widely available
 as that for xterm, or even rxvt (for which the same problem often arises).
 The correct solution for this problem is to install the terminfo, this can
-be done like this (with ncurses' infocmp):
+be done like this (with ncurses' infocmp and works as user and admin):
    REMOTE=remotesystem.domain
-   infocmp rxvt-unicode | ssh $REMOTE "cat >/tmp/ti && tic /tmp/ti"
+   infocmp rxvt-unicode | ssh $REMOTE "mkdir -p .terminfo && cat >/tmp/ti && tic /tmp/ti"
 ... or by installing rxvt-unicode normally on the remote system,
+One some systems you might need to set C<$TERMINFO> to the full path of
+F<$HOME/.terminfo> for this to work.
 If you cannot or do not want to do this, then you can simply set
 C<TERM=rxvt> or even C<TERM=xterm>, and live with the small number of
 problems arising, which includes wrong keymapping, less and different
 colours and some refresh errors in fullscreen applications. It's a nice
 resource to set it:
    URxvt.termName: rxvt
 If you don't plan to use B<rxvt> (quite common...) you could also replace
-the rxvt terminfo file with the rxvt-unicode one.
+the rxvt terminfo file with the rxvt-unicode one and use C<TERM=rxvt>.
 =head3 C<tic> outputs some error when compiling the terminfo entry.
 Most likely it's the empty definition for C<enacs=>. Just replace it by
 C<enacs=\E[0@> and try again.
-=head3 C<bash>'s readline does not work correctly under @@RXVT_NAME@@.
+=head3 C<bash>'s readline does not work correctly under @@URXVT_NAME@@.
 See next entry.
 =head3 I need a termcap file entry.
 One reason you might want this is that some distributions or operating
 systems still compile some programs using the long-obsoleted termcap
 library (Fedora Core's bash is one example) and rely on a termcap entry
 for C<rxvt-unicode>.
-You could use rxvt's termcap entry with resonable results in many cases.
+You could use rxvt's termcap entry with reasonable results in many cases.
 You can also create a termcap entry by using terminfo's infocmp program
 like this:
    infocmp -C rxvt-unicode
            :vs=\E[?25h:
 =head3 Why does C<ls> no longer have coloured output?
 The C<ls> in the GNU coreutils unfortunately doesn't use terminfo to
-decide wether a terminal has colour, but uses it's own configuration
+decide whether a terminal has colour, but uses its own configuration
-file. Needless to say, C<rxvt-unicode> is not in it's default file (among
+file. Needless to say, C<rxvt-unicode> is not in its default file (among
 with most other terminals supporting colour). Either add:
    TERM rxvt-unicode
 to C</etc/DIR_COLORS> or simply add:
 If you encounter strange problems like typing an accented character but
 getting two unrelated other characters or similar, or if program output is
 subtly garbled, then you should check your locale settings.
 Rxvt-unicode must be started with the same C<LC_CTYPE> setting as the
-programs. Often rxvt-unicode is started in the C<C> locale, while the
+programs running in it. Often rxvt-unicode is started in the C<C> locale,
-login script running within the rxvt-unicode window changes the locale to
+while the login script running within the rxvt-unicode window changes the
-something else, e.g. C<en_GB.UTF-8>. Needless to say, this is not going to work.
+locale to something else, e.g. C<en_GB.UTF-8>. Needless to say, this is
+not going to work, and is the most common cause for problems.
 The best thing is to fix your startup environment, as you will likely run
 into other problems. If nothing works you can try this in your .profile.
-  printf '\e]701;%s\007' "$LC_CTYPE"
+  printf '\33]701;%s\007' "$LC_CTYPE"   # $LANG or $LC_ALL are worth a try, too
 If this doesn't work, then maybe you use a C<LC_CTYPE> specification not
 supported on your systems. Some systems have a C<locale> command which
 displays this (also, C<perl -e0> can be used to check locale settings, as
 it will complain loudly if it cannot set the locale). If it displays something
 The reasons is that there exists a perfectly fine mechanism for selecting
 the encoding, doing I/O and (most important) communicating this to all
 applications so everybody agrees on character properties such as width
 and code number. This mechanism is the I<locale>. Applications not using
 that info will have problems (for example, C<xterm> gets the width of
-characters wrong as it uses it's own, locale-independent table under all
+characters wrong as it uses its own, locale-independent table under all
 locales).
 Rxvt-unicode uses the C<LC_CTYPE> locale category to select encoding. All
 programs doing the same (that is, most) will automatically agree in the
 interpretation of characters.
 =head3 Can I switch locales at runtime?
 Yes, using an escape sequence. Try something like this, which sets
 rxvt-unicode's idea of C<LC_CTYPE>.
-  printf '\e]701;%s\007' ja_JP.SJIS
+  printf '\33]701;%s\007' ja_JP.SJIS
 See also the previous answer.
 Sometimes this capability is rather handy when you want to work in
 one locale (e.g. C<de_DE.UTF-8>) but some programs don't support it
 (e.g. UTF-8). For example, I use this script to start C<xjdic>, which
 first switches to a locale supported by xjdic and back later:
-   printf '\e]701;%s\007' ja_JP.SJIS
+   printf '\33]701;%s\007' ja_JP.SJIS
    xjdic -js
-   printf '\e]701;%s\007' de_DE.UTF-8
+   printf '\33]701;%s\007' de_DE.UTF-8
 You can also use xterm's C<luit> program, which usually works fine, except
 for some locales where character width differs between program- and
 rxvt-unicode-locales.
+=head3 I have problems getting my input method working.
+Try a search engine, as this is slightly different for every input method server.
+Here is a checklist:
+=over 4
+=item - Make sure your locale I<and> the imLocale are supported on your OS.
+Try C<locale -a> or check the documentation for your OS.
+=item - Make sure your locale or imLocale matches a locale supported by your XIM.
+For example, B<kinput2> does not support UTF-8 locales, you should use
+C<ja_JP.EUC-JP> or equivalent.
+=item - Make sure your XIM server is actually running.
+=item - Make sure the C<XMODIFIERS> environment variable is set correctly when I<starting> rxvt-unicode.
+When you want to use e.g. B<kinput2>, it must be set to
+C<@im=kinput2>. For B<scim>, use C<@im=SCIM>. You can see what input
+method servers are running with this command:
+   xprop -root XIM_SERVERS
+=item
+=back
 =head3 My input method wants <some encoding> but I want UTF-8, what can I do?
 You can specify separate locales for the input method and the rest of the
 terminal, using the resource C<imlocale>:
    URxvt.imlocale: ja_JP.EUC-JP
 Now you can start your terminal with C<LC_CTYPE=ja_JP.UTF-8> and still
-use your input method. Please note, however, that you will not be able to
+use your input method. Please note, however, that, depending on your Xlib
-input characters outside C<EUC-JP> in a normal way then, as your input
+version, you may not be able to input characters outside C<EUC-JP> in a
-method limits you.
+normal way then, as your input method limits you.
 =head3 Rxvt-unicode crashes when the X Input Method changes or exits.
 Unfortunately, this is unavoidable, as the XIM protocol is racy by
 design. Applications can avoid some crashes at the expense of memory
 =head3 I am maintaining rxvt-unicode for distribution/OS XXX, any recommendation?
 You should build one binary with the default options. F<configure>
 now enables most useful options, and the trend goes to making them
-runtime-switchable, too, so there is usually no drawback to enbaling them,
+runtime-switchable, too, so there is usually no drawback to enabling them,
 except higher disk and possibly memory usage. The perl interpreter should
 be enabled, as important functionality (menus, selection, likely more in
 the future) depends on it.
 You should not overwrite the C<perl-ext-common> snd C<perl-ext> resources
 This forking is done as the very first within main(), which is very early
 and reduces possible bugs to initialisation code run before main(), or
 things like the dynamic loader of your system, which should result in very
 little risk.
-=head3 On Solaris 9, many line-drawing characters are too wide.
-Seems to be a known bug, read
-L<http://nixdoc.net/files/forum/about34198.html>. Some people use the
-following ugly workaround to get non-double-wide-characters working:
-   #define wcwidth(x) wcwidth(x) > 1 ? 1 : wcwidth(x)
 =head3 I am on FreeBSD and rxvt-unicode does not seem to work at all.
 Rxvt-unicode requires the symbol C<__STDC_ISO_10646__> to be defined
 in your compile environment, or an implementation that implements it,
-wether it defines the symbol or not. C<__STDC_ISO_10646__> requires that
+whether it defines the symbol or not. C<__STDC_ISO_10646__> requires that
 B<wchar_t> is represented as unicode.
-As you might have guessed, FreeBSD does neither define this symobl nor
+As you might have guessed, FreeBSD does neither define this symbol nor
-does it support it. Instead, it uses it's own internal representation of
+does it support it. Instead, it uses its own internal representation of
 B<wchar_t>. This is, of course, completely fine with respect to standards.
 However, that means rxvt-unicode only works in C<POSIX>, C<ISO-8859-1> and
 C<UTF-8> locales under FreeBSD (which all use Unicode as B<wchar_t>.
 The rxvt-unicode author insists that the right way to fix this is in the
 system libraries once and for all, instead of forcing every app to carry
 complete replacements for them :)
-=head3 I use Solaris 9 and it doesn't compile/work/etc.
-Try the diff in F<doc/solaris9.patch> as a base. It fixes the worst
-problems with C<wcwidth> and a compile problem.
 =head3 How can I use rxvt-unicode under cygwin?
 rxvt-unicode should compile and run out of the box on cygwin, using
 the X11 libraries that come with cygwin. libW11 emulation is no
 longer supported (and makes no sense, either, as it only supported a
 At the time of this writing, cygwin didn't seem to support any multi-byte
 encodings (you might try C<LC_CTYPE=C-UTF-8>), so you are likely limited
 to 8-bit encodings.
+=head3 Character widths are not correct.
+urxvt uses the system wcwidth function to know the information about
+the width of characters, so on systems with incorrect locale data you
+will likely get bad results. Two notorious examples are Solaris 9,
+where single-width characters like U+2514 are reported as double-width,
+and Darwin 8, where combining chars are reported having width 1.
+The solution is to upgrade your system or switch to a better one. A
+possibly working workaround is to use a wcwidth implementation like
+http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c
-=head1 RXVT TECHNICAL REFERENCE
+=head1 RXVT-UNICODE TECHNICAL REFERENCE
-=head1 DESCRIPTION
 The rest of this document describes various technical aspects of
 B<rxvt-unicode>. First the description of supported command sequences,
 followed by pixmap support and last by a description of all features
 selectable at C<configure> time.
-=head1 Definitions
+=head2 Definitions
 =over 4
 =item B<< C<c> >>
 A text parameter composed of printable characters.
 =back
-=head1 Values
+=head2 Values
 =over 4
 =item B<< C<ENQ> >>
 Space Character
 =back
-=head1 Escape Sequences
+=head2 Escape Sequences
 =over 4
 =item B<< C<ESC # 8> >>
 =back
 X<CSI>
-=head1 CSI (Command Sequence Introducer) Sequences
+=head2 CSI (Command Sequence Introducer) Sequences
 =over 4
 =item B<< C<ESC [ Ps @> >>
 =back
 X<PrivateModes>
-=head1 DEC Private Modes
+=head2 DEC Private Modes
 =over 4
 =item B<< C<ESC [ ? Pm h> >>
 Toggle DEC Private Mode Values (rxvt extension). I<where>
 =over 4
-=item B<< C<Ps = 1> >> (DECCKM)
+=item B<< C<Pm = 1> >> (DECCKM)
 =begin table
 	B<< C<h> >>	Application Cursor Keys
 	B<< C<l> >>	Normal Cursor Keys
 =end table
-=item B<< C<Ps = 2> >> (ANSI/VT52 mode)
+=item B<< C<Pm = 2> >> (ANSI/VT52 mode)
 =begin table
 	B<< C<h> >>	Enter VT52 mode
 	B<< C<l> >>	Enter VT52 mode
 =end table
-=item B<< C<Ps = 3> >>
+=item B<< C<Pm = 3> >>
 =begin table
 	B<< C<h> >>	132 Column Mode (DECCOLM)
 	B<< C<l> >>	80 Column Mode (DECCOLM)
 =end table
-=item B<< C<Ps = 4> >>
+=item B<< C<Pm = 4> >>
 =begin table
 	B<< C<h> >>	Smooth (Slow) Scroll (DECSCLM)
 	B<< C<l> >>	Jump (Fast) Scroll (DECSCLM)
 =end table
-=item B<< C<Ps = 5> >>
+=item B<< C<Pm = 5> >>
 =begin table
 	B<< C<h> >>	Reverse Video (DECSCNM)
 	B<< C<l> >>	Normal Video (DECSCNM)
 =end table
-=item B<< C<Ps = 6> >>
+=item B<< C<Pm = 6> >>
 =begin table
 	B<< C<h> >>	Origin Mode (DECOM)
 	B<< C<l> >>	Normal Cursor Mode (DECOM)
 =end table
-=item B<< C<Ps = 7> >>
+=item B<< C<Pm = 7> >>
 =begin table
 	B<< C<h> >>	Wraparound Mode (DECAWM)
 	B<< C<l> >>	No Wraparound Mode (DECAWM)
 =end table
-=item B<< C<Ps = 8> >> I<unimplemented>
+=item B<< C<Pm = 8> >> I<unimplemented>
 =begin table
 	B<< C<h> >>	Auto-repeat Keys (DECARM)
 	B<< C<l> >>	No Auto-repeat Keys (DECARM)
 =end table
-=item B<< C<Ps = 9> >> X10 XTerm
+=item B<< C<Pm = 9> >> X10 XTerm
 =begin table
 	B<< C<h> >>	Send Mouse X & Y on button press.
 	B<< C<l> >>	No mouse reporting.
 =end table
-=item B<< C<Ps = 25> >>
+=item B<< C<Pm = 25> >>
 =begin table
 	B<< C<h> >>	Visible cursor {cnorm/cvvis}
 	B<< C<l> >>	Invisible cursor {civis}
 =end table
-=item B<< C<Ps = 30> >>
+=item B<< C<Pm = 30> >>
 =begin table
-	B<< C<h> >>	scrollBar visisble
+	B<< C<h> >>	scrollBar visible
-	B<< C<l> >>	scrollBar invisisble
+	B<< C<l> >>	scrollBar invisible
 =end table
-=item B<< C<Ps = 35> >> (B<rxvt>)
+=item B<< C<Pm = 35> >> (B<rxvt>)
 =begin table
 	B<< C<h> >>	Allow XTerm Shift+key sequences
 	B<< C<l> >>	Disallow XTerm Shift+key sequences
 =end table
-=item B<< C<Ps = 38> >> I<unimplemented>
+=item B<< C<Pm = 38> >> I<unimplemented>
 Enter Tektronix Mode (DECTEK)
-=item B<< C<Ps = 40> >>
+=item B<< C<Pm = 40> >>
 =begin table
 	B<< C<h> >>	Allow 80/132 Mode
 	B<< C<l> >>	Disallow 80/132 Mode
 =end table
-=item B<< C<Ps = 44> >> I<unimplemented>
+=item B<< C<Pm = 44> >> I<unimplemented>
 =begin table
 	B<< C<h> >>	Turn On Margin Bell
 	B<< C<l> >>	Turn Off Margin Bell
 =end table
-=item B<< C<Ps = 45> >> I<unimplemented>
+=item B<< C<Pm = 45> >> I<unimplemented>
 =begin table
 	B<< C<h> >>	Reverse-wraparound Mode
 	B<< C<l> >>	No Reverse-wraparound Mode
 =end table
-=item B<< C<Ps = 46> >> I<unimplemented>
+=item B<< C<Pm = 46> >> I<unimplemented>
-=item B<< C<Ps = 47> >>
+=item B<< C<Pm = 47> >>
 =begin table
 	B<< C<h> >>	Use Alternate Screen Buffer
 	B<< C<l> >>	Use Normal Screen Buffer
 =end table
 X<Priv66>
-=item B<< C<Ps = 66> >>
+=item B<< C<Pm = 66> >>
 =begin table
 	B<< C<h> >>	Application Keypad (DECPAM) == C<ESC =>
 	B<< C<l> >>	Normal Keypad (DECPNM) == C<< ESC > >>
 =end table
-=item B<< C<Ps = 67> >>
+=item B<< C<Pm = 67> >>
 =begin table
 	B<< C<h> >>	Backspace key sends B<< C<BS> (DECBKM) >>
 	B<< C<l> >>	Backspace key sends B<< C<DEL> >>
 =end table
-=item B<< C<Ps = 1000> >> (X11 XTerm)
+=item B<< C<Pm = 1000> >> (X11 XTerm)
 =begin table
 	B<< C<h> >>	Send Mouse X & Y on button press and release.
 	B<< C<l> >>	No mouse reporting.
 =end table
-=item B<< C<Ps = 1001> >> (X11 XTerm) I<unimplemented>
+=item B<< C<Pm = 1001> >> (X11 XTerm) I<unimplemented>
 =begin table
 	B<< C<h> >>	Use Hilite Mouse Tracking.
 	B<< C<l> >>	No mouse reporting.
 =end table
+=item B<< C<Pm = 1002> >> (X11 XTerm)
+=begin table
+	B<< C<h> >>	Send Mouse X & Y on button press and release, and motion with a button pressed.
+	B<< C<l> >>	No mouse reporting.
+=end table
+=item B<< C<Pm = 1003> >> (X11 XTerm)
+=begin table
+	B<< C<h> >>	Send Mouse X & Y on button press and release, and motion.
+	B<< C<l> >>	No mouse reporting.
+=end table
-=item B<< C<Ps = 1010> >> (B<rxvt>)
+=item B<< C<Pm = 1010> >> (B<rxvt>)
 =begin table
 	B<< C<h> >>	Don't scroll to bottom on TTY output
 	B<< C<l> >>	Scroll to bottom on TTY output
 =end table
-=item B<< C<Ps = 1011> >> (B<rxvt>)
+=item B<< C<Pm = 1011> >> (B<rxvt>)
 =begin table
 	B<< C<h> >>	Scroll to bottom when a key is pressed
 	B<< C<l> >>	Don't scroll to bottom when a key is pressed
 =end table
-=item B<< C<Ps = 1021> >> (B<rxvt>)
+=item B<< C<Pm = 1021> >> (B<rxvt>)
 =begin table
 	B<< C<h> >>	Bold/italic implies high intensity (see option B<-is>)
 	B<< C<l> >>	Font styles have no effect on intensity (Compile styles)
 =end table
-=item B<< C<Ps = 1047> >>
+=item B<< C<Pm = 1047> >>
 =begin table
 	B<< C<h> >>	Use Alternate Screen Buffer
 	B<< C<l> >>	Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it
 =end table
-=item B<< C<Ps = 1048> >>
+=item B<< C<Pm = 1048> >>
 =begin table
 	B<< C<h> >>	Save cursor position
 	B<< C<l> >>	Restore cursor position
 =end table
-=item B<< C<Ps = 1049> >>
+=item B<< C<Pm = 1049> >>
 =begin table
 	B<< C<h> >>	Use Alternate Screen Buffer - clear Alternate Screen Buffer if switching to it
 	B<< C<l> >>	Use Normal Screen Buffer
 =back
 X<XTerm>
-=head1 XTerm Operating System Commands
+=head2 XTerm Operating System Commands
 =over 4
 =item B<< C<ESC ] Ps;Pt ST> >>
 	B<< C<Ps = 0> >>	Change Icon Name and Window Title to B<< C<Pt> >>
 	B<< C<Ps = 1> >>	Change Icon Name to B<< C<Pt> >>
 	B<< C<Ps = 2> >>	Change Window Title to B<< C<Pt> >>
 	B<< C<Ps = 3> >>	If B<< C<Pt> >> starts with a B<< C<?> >>, query the (STRING) property of the window and return it. If B<< C<Pt> >> contains a B<< C<=> >>, set the named property to the given value, else delete the specified property.
 	B<< C<Ps = 4> >>	B<< C<Pt> >> is a semi-colon separated sequence of one or more semi-colon separated B<number>/B<name> pairs, where B<number> is an index to a colour and B<name> is the name of a colour. Each pair causes the B<number>ed colour to be changed to B<name>. Numbers 0-7 corresponds to low-intensity (normal) colours and 8-15 corresponds to high-intensity colours. 0=black, 1=red, 2=green, 3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white
-	B<< C<Ps = 10> >>	Change colour of text foreground to B<< C<Pt> >> B<(NB: may change in future)>
+	B<< C<Ps = 10> >>	Change colour of text foreground to B<< C<Pt> >>
-	B<< C<Ps = 11> >>	Change colour of text background to B<< C<Pt> >> B<(NB: may change in future)>
+	B<< C<Ps = 11> >>	Change colour of text background to B<< C<Pt> >>
 	B<< C<Ps = 12> >>	Change colour of text cursor foreground to B<< C<Pt> >>
 	B<< C<Ps = 13> >>	Change colour of mouse foreground to B<< C<Pt> >>
 	B<< C<Ps = 17> >>	Change colour of highlight characters to B<< C<Pt> >>
 	B<< C<Ps = 18> >>	Change colour of bold characters to B<< C<Pt> >> [deprecated, see 706]
 	B<< C<Ps = 19> >>	Change colour of underlined characters to B<< C<Pt> >> [deprecated, see 707]
-	B<< C<Ps = 20> >>	Change background pixmap parameters (see section XPM) (Compile XPM).
+	B<< C<Ps = 20> >>	Change background pixmap parameters (see section BACKGROUND IMAGE) (Compile AfterImage).
-	B<< C<Ps = 39> >>	Change default foreground colour to B<< C<Pt> >>.
+	B<< C<Ps = 39> >>	Change default foreground colour to B<< C<Pt> >>. [deprecated, use 10]
 	B<< C<Ps = 46> >>	Change Log File to B<< C<Pt> >> I<unimplemented>
-	B<< C<Ps = 49> >>	Change default background colour to B<< C<Pt> >>.
+	B<< C<Ps = 49> >>	Change default background colour to B<< C<Pt> >>. [deprecated, use 11]
 	B<< C<Ps = 50> >>	Set fontset to B<< C<Pt> >>, with the following special values of B<< C<Pt> >> (B<rxvt>) B<< C<#+n> >> change up B<< C<n> >> B<< C<#-n> >> change down B<< C<n> >> if B<< C<n> >> is missing of 0, a value of 1 is used I<empty> change to font0 B<< C<n> >> change to font B<< C<n> >>
-	B<< C<Ps = 55> >>	Log all scrollback buffer and all of screen to B<< C<Pt> >>
+	B<< C<Ps = 55> >>	Log all scrollback buffer and all of screen to B<< C<Pt> >> [disabled]
 	B<< C<Ps = 701> >>	Change current locale to B<< C<Pt> >>, or, if B<< C<Pt> >> is B<< C<?> >>, return the current locale (Compile frills).
 	B<< C<Ps = 702> >>	Request version if B<< C<Pt> >> is B<< C<?> >>, returning C<rxvt-unicode>, the resource name, the major and minor version numbers, e.g. C<ESC ] 702 ; rxvt-unicode ; urxvt ; 7 ; 4 ST>.
 	B<< C<Ps = 704> >>	Change colour of italic characters to B<< C<Pt> >>
 	B<< C<Ps = 705> >>	Change background pixmap tint colour to B<< C<Pt> >> (Compile transparency).
 	B<< C<Ps = 706> >>	Change colour of bold characters to B<< C<Pt> >>
 =end table
 =back
-X<XPM>
+=head1 BACKGROUND IMAGE
-=head1 XPM
-For the XPM XTerm escape sequence B<< C<ESC ] 20 ; Pt ST> >> then value
+For the BACKGROUND IMAGE XTerm escape sequence B<< C<ESC ] 20 ; Pt ST> >> the value
-of B<< C<Pt> >> can be the name of the background pixmap followed by a
+of B<< C<Pt> >> can be the name of the background image file followed by a
 sequence of scaling/positioning commands separated by semi-colons. The
 scaling/positioning commands are as follows:
 =over 4
 For example:
 =over 4
-=item B<\E]20;funky\a>
+=item B<\E]20;funky.jpg\a>
-load B<funky.xpm> as a tiled image
+load B<funky.jpg> as a tiled image
-=item B<\E]20;mona;100\a>
+=item B<\E]20;mona.jpg;100\a>
-load B<mona.xpm> with a scaling of 100%
+load B<mona.jpg> with a scaling of 100%
 =item B<\E]20;;200;?\a>
 rescale the current pixmap to 200% and display the image geometry in
 the title
 =begin table
 	4	Shift
 	8	Meta
 	16	Control
-	32	Double Click I<(Rxvt extension)>
+	32	Double Click I<(rxvt extension)>
 =end table
 Col = B<< C<< <x> - SPACE >> >>
 =head1 CONFIGURE OPTIONS
 General hint: if you get compile errors, then likely your configuration
 hasn't been tested well. Either try with C<--enable-everything> or use
-the F<./reconf> script as a base for experiments. F<./reconf> is used by
+the default configuration (i.e. no C<--enable-xxx> or C<--disable-xxx>
-myself, so it should generally be a working config. Of course, you should
+switches). Of course, you should always report when a combination doesn't
-always report when a combination doesn't work, so it can be fixed. Marc
+work, so it can be fixed. Marc Lehmann <rxvt@schmorp.de>.
-Lehmann <rxvt@schmorp.de>.
 All
 =over 4
 =begin table
 	all	all available codeset groups
 	zh	common chinese encodings
-	zh_ext	rarely used but very big chinese encodigs
+	zh_ext	rarely used but very big chinese encodings
 	jp	common japanese encodings
 	jp_ext	rarely used but big japanese encodings
 	kr	korean encodings
 =end table
 requirements per character from 2 to 4 bytes. X11 fonts do not yet
 support these extra characters, but Xft does.
 Please note that rxvt-unicode can store unicode code points >65535
 even without this flag, but the number of such characters is
-limited to a view thousand (shared with combining characters,
+limited to a few thousand (shared with combining characters,
 see next switch), and right now rxvt-unicode cannot display them
 (input/output and cut&paste still work, though).
 =item --enable-combining (default: on)
 =item --with-res-name=NAME (default: urxvt)
 Use the given name as default application name when
 reading resources. Specify --with-res-name=rxvt to replace rxvt.
-=item --with-res-class=CLASS /default: URxvt)
+=item --with-res-class=CLASS (default: URxvt)
 Use the given class as default application class
 when reading resources. Specify --with-res-class=Rxvt to replace
 rxvt.
 Write user and tty to lastlog file (used by programs like
 F<lastlogin>) at start of rxvt execution.  This option requires
 --enable-utmp to also be specified.
-=item --enable-xpm-background (default: on)
+=item --enable-afterimage (default: on)
-Add support for XPM background pixmaps.
+Add support for libAfterImage to be used for transparency and background
+images. It adds support for many file formats including JPG, PNG,
+SVG, TIFF, GIF, XPM, BMP, ICO, XCF, TGA and AfterStep image XML
+(L<http://www.afterstep.org/visualdoc.php?show=asimagexml>).
+This option also adds such eye candy as blending an image over the root
+background, as well as dynamic scaling and bluring of background images.
+Note that with this option enabled, @@RXVT_NAME@@'s memory footprint might
+increase by a few megabytes even if no extra features are used (mostly due
+to third-party libraries used by libAI). Memory footprint may somewhat be
+lowered if libAfterImage is configured without support for SVG.
 =item --enable-transparency (default: on)
-Add support for inheriting parent backgrounds thus giving a fake
+Add support for backgrounds, creating illusion of transparency in the term.
-transparency to the term.
 =item --enable-fading (default: on)
-Add support for fading the text when focus is lost (requires C<--enable-transparency>).
+Add support for fading the text when focus is lost.
-=item --enable-tinting (default: on)
-Add support for tinting of transparent backgrounds (requires C<--enable-transparency>).
 =item --enable-rxvt-scroll (default: on)
 Add support for the original rxvt scrollbar.
 Add support for a very unobtrusive, plain-looking scrollbar that
 is the favourite of the rxvt-unicode author, having used it for
 many years.
-=item --enable-ttygid (default: off)
-Change tty device setting to group "tty" - only use this if
-your system uses this type of security.
 =item --disable-backspace-key
 Removes any handling of the backspace key by us - let the X server do it.
 =item --disable-delete-key
 A non-exhaustive list of features enabled by C<--enable-frills> (possibly
 in combination with other switches) is:
   MWM-hints
   EWMH-hints (pid, utf8 names) and protocols (ping)
+  urgency hint
   seperate underline colour (-underlineColor)
   settable border widths and borderless switch (-w, -b, -bl)
   visual depth selection (-depth)
   settable extra linespacing /-lsp)
-  iso-14755-2 and -3, and visual feedback
+  iso-14755 5.1 (basic) support
   tripleclickwords (-tcw)
   settable insecure mode (-insecure)
   keysym remapping support
   cursor blinking and underline cursor (-cb, -uc)
   XEmbed support (-embed)
   user-pty (-pty-fd)
   hold on exit (-hold)
+  compile in built-in block graphics
   skip builtin block graphics (-sbg)
+  separate highlightcolor support (-hc)
-It also enabled some non-essential features otherwise disabled, such as:
+It also enables some non-essential features otherwise disabled, such as:
   some round-trip time optimisations
   nearest color allocation on pseudocolor screens
-  UTF8_STRING supporr for selection
+  UTF8_STRING support for selection
   sgr modes 90..97 and 100..107
   backindex and forwardindex escape sequences
-  view change/zero scorllback esacpe sequences
+  view change/zero scrollback escape sequences
   locale switching escape sequence
   window op and some xterm/OSC escape sequences
   rectangular selections
   trailing space removal for selections
   verbose X error handling
 =item --enable-keepscrolling (default: on)
 Add support for continual scrolling of the display when you hold
 the mouse button down on a scrollbar arrow.
+=item --enable-selectionscrolling (default: on)
+Add support for scrolling when the selection moves to the top or
+bottom of the screen.
 =item --enable-mousewheel (default: on)
 Add support for scrolling via mouse wheel or buttons 4 & 5.
 =item --enable-slipwheeling (default: on)
 Add support for continual scrolling (using the mouse wheel as an
 accelerator) while the control key is held down.  This option
 requires --enable-mousewheel to also be specified.
-=item --disable-new-selection
-Remove support for mouse selection style like that of xterm.
-=item --enable-dmalloc (default: off)
-Use Gray Watson's malloc - which is good for debugging See
-http://www.letters.com/dmalloc/ for details If you use either this or the
-next option, you may need to edit src/Makefile after compiling to point
-DINCLUDE and DLIB to the right places.
-You can only use either this option and the following (should
-you use either) .
-=item --enable-dlmalloc (default: off)
-Use Doug Lea's malloc - which is good for a production version
-See L<http://g.oswego.edu/dl/html/malloc.html> for details.
-=item --enable-smart-resize (default: on)
+=item --enable-smart-resize (default: off)
-Add smart growth/shrink behaviour when changing font size via hot
+Add smart growth/shrink behaviour when resizing.
-keys. This should keep the window corner which is closest to a corner of
+This should keep the window corner which is closest to a corner of
 the screen in a fixed position.
+=item --enable-text-blink (default: on)
+Add support for blinking text.
 =item --enable-pointer-blank (default: on)
 Add support to have the pointer disappear when typing or inactive.
 =item --enable-perl (default: on)
 Enable an embedded perl interpreter. See the B<@@RXVT_NAME@@perl(3)>
-manpage (F<doc/rxvtperl.txt>) for more info on this feature, or the files
+manpage (F<doc/rxvtperl.txt>) for more info on this feature, or the
-in F<src/perl-ext/> for the extensions that are installed by default. The
+files in F<src/perl-ext/> for the extensions that are installed by
-perl interpreter that is used can be specified via the C<PERL> environment
+default. The perl interpreter that is used can be specified via the
-variable when running configure.
+C<PERL> environment variable when running configure. Even when compiled
+in, perl will I<not> be initialised when all extensions have been disabled
+C<-pe "" --perl-ext-common "">, so it should be safe to enable from a
+resource standpoint.
+=item --with-afterimage-config=DIR
+Look for the libAfterImage config script in DIR.
 =item --with-name=NAME (default: urxvt)
 Set the basename for the installed binaries, resulting
 in C<urxvt>, C<urxvtd> etc.). Specify C<--with-name=rxvt> to replace with
 PATH.
 =item --with-x
 Use the X Window System (pretty much default, eh?).
-=item --with-xpm-includes=DIR
-Look for the XPM includes in DIR.
-=item --with-xpm-library=DIR
-Look for the XPM library in DIR.
-=item --with-xpm
-Not needed - define via --enable-xpm-background.
 =back
 =head1 AUTHORS

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.7.pod (file contents): Revision 1.102 by root, Tue Jan 31 20:50:48 2006 UTC vs. Revision 1.163 by ayin, Sat Jan 19 16:19:47 2008 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.7.pod (file contents):
Revision 1.102 by root, Tue Jan 31 20:50:48 2006 UTC vs.
Revision 1.163 by ayin, Sat Jan 19 16:19:47 2008 UTC