[ViewVC] Diff of: cvs/rxvt-unicode/doc/rxvt.7.pod

Comparing rxvt-unicode/doc/rxvt.7.pod (file contents):
Revision 1.89 by root, Wed Jan 18 21:00:39 2006 UTC vs.
Revision 1.242 by sf-exg, Sat May 14 08:31:26 2016 UTC

 =head1 DESCRIPTION
 This document contains the FAQ, the RXVT TECHNICAL REFERENCE documenting
 all escape sequences, and other background information.
-The newest version of this document is
+The newest version of this document is also available on the World Wide Web at
-also available on the World Wide Web at
+L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.7.pod>.
-L<http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>.
+The main manual page for @@RXVT_NAME@@ itself is available at
+L<http://pod.tst.eu/http://cvs.schmorp.de/rxvt-unicode/doc/rxvt.1.pod>.
-=head1 FREQUENTLY ASKED QUESTIONS
+=head1 RXVT-UNICODE/URXVT FREQUENTLY ASKED QUESTIONS
-=over 4
-=item The new selection selects pieces that are too big, how can I select
+=head2 Meta, Features & Commandline Issues
-single words?
-Yes. For example, if you want to select alphanumeric words, you can use
+=head3 My question isn't answered here, can I ask a human?
-the following resource:
-   URxvt.selection.pattern-0: ([[:word:]]+)
+Before sending me mail, you could go to IRC: C<irc.freenode.net>,
+channel C<#rxvt-unicode> has some rxvt-unicode enthusiasts that might be
+interested in learning about new and exciting problems (but not FAQs :).
-If you click more than twice, the selection will be extended
+=head3 I use Gentoo, and I have a problem...
-more and more.
-To get a selection that is very similar to the old code, try this pattern:
+There are two big problems with Gentoo Linux: first, most if not all
+Gentoo systems are completely broken (missing or mismatched header
+files, broken compiler etc. are just the tip of the iceberg);
+secondly, it should be called Gentoo GNU/Linux.
-   URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\\\\]^`{|})]+)
+For these reasons, it is impossible to support rxvt-unicode on
+Gentoo. Problems appearing on Gentoo systems will usually simply be
+ignored unless they can be reproduced on non-Gentoo systems.
-Please also note that the I<LeftClick Shift-LeftClik> combination also
+=head3 Does it support tabs, can I have a tabbed rxvt-unicode?
-selects words like the old code.
-=item I don't like the new selection/popups/hotkeys/perl, how do I
+Beginning with version 7.3, there is a perl extension that implements a
-change/disable it?
+simple tabbed terminal. It is installed by default, so any of these should
+give you tabs:
-You can disable the perl extension completely by setting the
+   @@URXVT_NAME@@ -pe tabbed
-B<perl-ext-common> resource to the empty string, which also keeps
-rxvt-unicode from initialising perl, saving memory.
-If you only want to disable specific features, you first have to
+   URxvt.perl-ext-common: default,tabbed
-identify which perl extension is responsible. For this, read the section
-B<PREPACKAGED EXTENSIONS> in the @@RXVT_NAME@@perl(3) manpage. For
-example, to disable the B<selection-popup> and B<option-popup>, specify
-this B<perl-ext-common> resource:
-   URxvt.perl-ext-common: default,-selection-popup,-option-popup
+It will also work fine with tabbing functionality of many window managers
+or similar tabbing programs, and its embedding-features allow it to be
+embedded into other programs, as witnessed by F<doc/rxvt-tabbed> or
+the upcoming C<Gtk2::URxvt> perl module, which features a tabbed urxvt
+(murxvt) terminal as an example embedding application.
-This will keep the default extensions, but disable the two popup
+=head3 How do I know which rxvt-unicode version I'm using?
-extensions. Some extensions can also be configured, for example,
-scrollback search mode is triggered by B<M-s>. You can move it to any
-other combination either by setting the B<searchable-scrollback> resource:
-   URxvt.searchable-scrollback: CM-s
+The version number is displayed with the usage (-h). Also the escape
+sequence C<ESC [ 8 n> sets the window title to the version number. When
+using the @@URXVT_NAME@@c client, the version displayed is that of the
+daemon.
+=head3 Rxvt-unicode uses gobs of memory, how can I reduce that?
+Rxvt-unicode tries to obey the rule of not charging you for something you
+don't use. One thing you should try is to configure out all settings that
+you don't need, for example, Xft support is a resource hog by design,
+when used. Compiling it out ensures that no Xft font will be loaded
+accidentally when rxvt-unicode tries to find a font for your characters.
+Also, many people (me included) like large windows and even larger
+scrollback buffers: Without C<--enable-unicode3>, rxvt-unicode will use
+6 bytes per screen cell. For a 160x?? window this amounts to almost a
+kilobyte per line. A scrollback buffer of 10000 lines will then (if full)
+use 10 Megabytes of memory. With C<--enable-unicode3> it gets worse, as
+rxvt-unicode then uses 8 bytes per screen cell.
+=head3 How can I start @@URXVT_NAME@@d in a race-free way?
+Try C<@@URXVT_NAME@@d -f -o>, which tells @@URXVT_NAME@@d to open the
+display, create the listening socket and then fork.
+=head3 How can I start @@URXVT_NAME@@d automatically when I run @@URXVT_NAME@@c?
+If you want to start @@URXVT_NAME@@d automatically whenever you run
+@@URXVT_NAME@@c and the daemon isn't running yet, use this script:
+   #!/bin/sh
+   @@URXVT_NAME@@c "$@"
+   if [ $? -eq 2 ]; then
+      @@URXVT_NAME@@d -q -o -f
+      @@URXVT_NAME@@c "$@"
+   fi
+This tries to create a new terminal, and if fails with exit status 2,
+meaning it couldn't connect to the daemon, it will start the daemon and
+re-run the command. Subsequent invocations of the script will re-use the
+existing daemon.
+=head3 How do I distinguish whether I'm running rxvt-unicode or a regular
+xterm? I need this to decide about setting colours etc.
+The original rxvt and rxvt-unicode always export the variable "COLORTERM",
+so you can check and see if that is set. Note that several programs, JED,
+slrn, Midnight Commander automatically check this variable to decide
+whether or not to use colour.
+=head3 How do I set the correct, full IP address for the DISPLAY variable?
+If you've compiled rxvt-unicode with DISPLAY_IS_IP and have enabled
+insecure mode then it is possible to use the following shell script
+snippets to correctly set the display. If your version of rxvt-unicode
+wasn't also compiled with ESCZ_ANSWER (as assumed in these snippets) then
+the COLORTERM variable can be used to distinguish rxvt-unicode from a
+regular xterm.
+Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script
+snippets:
+   # Bourne/Korn/POSIX family of shells:
+   [ ${TERM:-foo} = foo ] && TERM=xterm # assume an xterm if we don't know
+   if [ ${TERM:-foo} = xterm ]; then
+      stty -icanon -echo min 0 time 15 # see if enhanced rxvt or not
+      printf "\eZ"
+      read term_id
+      stty icanon echo
+      if [ ""${term_id} = '^[[?1;2C' -a ${DISPLAY:-foo} = foo ]; then
+         printf '\e[7n'        # query the rxvt we are in for the DISPLAY string
+         read DISPLAY          # set it in our local shell
+      fi
+   fi
+=head3 How do I compile the manual pages on my own?
+You need to have a recent version of perl installed as F</usr/bin/perl>,
+one that comes with F<pod2man>, F<pod2text> and F<pod2xhtml> (from
+F<Pod::Xhtml>). Then go to the doc subdirectory and enter C<make alldoc>.
-=item Isn't rxvt supposed to be small? Don't all those features bloat?
+=head3 Isn't rxvt-unicode supposed to be small? Don't all those features bloat?
 I often get asked about this, and I think, no, they didn't cause extra
 bloat. If you compare a minimal rxvt and a minimal urxvt, you can see
 that the urxvt binary is larger (due to some encoding tables always being
 compiled in), but it actually uses less memory (RSS) after startup. Even
     text    data     bss     drs     rss filename
    98398    1664      24   15695    1824 rxvt --disable-everything
   188985    9048   66616   18222    1788 urxvt --disable-everything
-When you C<--enable-everything> (which _is_ unfair, as this involves xft
+When you C<--enable-everything> (which I<is> unfair, as this involves xft
 and full locale/XIM support which are quite bloaty inside libX11 and my
-libc), the two diverge, but not unreasnobaly so.
+libc), the two diverge, but not unreasonably so.
     text    data     bss     drs     rss filename
   163431    2152      24   20123    2060 rxvt --enable-everything
  1035683   49680   66648   29096    3680 urxvt --enable-everything
 (21152k + extra 4204k in separate processes) or konsole (22200k + extra
 43180k in daemons that stay around after exit, plus half a minute of
 startup time, including the hundreds of warnings it spits out), it fares
 extremely well *g*.
-=item Why C++, isn't that unportable/bloated/uncool?
+=head3 Why C++, isn't that unportable/bloated/uncool?
 Is this a question? :) It comes up very often. The simple answer is: I had
 to write it, and C++ allowed me to write and maintain it in a fraction
 of the time and effort (which is a scarce resource for me). Put even
 shorter: It simply wouldn't exist without C++.
 the case of rxvt-unicode this hardly matters, as its portability limits
 are defined by things like X11, pseudo terminals, locale support and unix
 domain sockets, which are all less portable than C++ itself.
 Regarding the bloat, see the above question: It's easy to write programs
-in C that use gobs of memory, an certainly possible to write programs in
+in C that use gobs of memory, and certainly possible to write programs in
 C++ that don't. C++ also often comes with large libraries, but this is
 not necessarily the case with GCC. Here is what rxvt links against on my
 system with a minimal config:
    libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
 And here is rxvt-unicode:
    libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
    libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000)
    libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000)
    libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000)
    /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
 No large bloated libraries (of course, none were linked in statically),
 except maybe libX11 :)
-=item Does it support tabs, can I have a tabbed rxvt-unicode?
-rxvt-unicode does not directly support tabs. It will work fine with
+=head2 Rendering, Font & Look and Feel Issues
-tabbing functionality of many window managers or similar tabbing programs,
-and its embedding-features allow it to be embedded into other programs,
-as witnessed by F<doc/rxvt-tabbed> or the upcoming C<Gtk2::URxvt> perl
-module, which features a tabbed urxvt (murxvt) terminal as an example
-embedding application.
-=item How do I know which rxvt-unicode version I'm using?
+=head3 I can't get transparency working, what am I doing wrong?
-The version number is displayed with the usage (-h). Also the escape
+First of all, transparency isn't officially supported in rxvt-unicode, so
-sequence C<ESC [ 8 n> sets the window title to the version number. When
+you are mostly on your own. Do not bug the author about it (but you may
-using the @@RXVT_NAME@@c client, the version displayed is that of the
+bug everybody else). Also, if you can't get it working consider it a rite
-daemon.
+of passage: ... and you failed.
-=item I am using Debian GNU/Linux and have a problem...
+Here are four ways to get transparency. B<Do> read the manpage and option
+descriptions for the programs mentioned and rxvt-unicode. Really, do it!
-The Debian GNU/Linux package of rxvt-unicode in sarge contains large
+1. Use transparent mode:
-patches that considerably change the behaviour of rxvt-unicode (but
-unfortunately this notice has been removed). Before reporting a bug to
-the original rxvt-unicode author please download and install the genuine
-version (L<http://software.schmorp.de#rxvt-unicode>) and try to reproduce
-the problem. If you cannot, chances are that the problems are specific to
-Debian GNU/Linux, in which case it should be reported via the Debian Bug
-Tracking System (use C<reportbug> to report the bug).
-For other problems that also affect the Debian package, you can and
+   Esetroot wallpaper.jpg
-probably should use the Debian BTS, too, because, after all, it's also a
+   @@URXVT_NAME@@ -tr -tint red -sh 40
-bug in the Debian version and it serves as a reminder for other users that
-might encounter the same issue.
-=item I am maintaining rxvt-unicode for distribution/OS XXX, any
+That works. If you think it doesn't, you lack transparency and tinting
-recommendation?
+support, or you are unable to read.
+This method requires that the background-setting program sets the
+_XROOTPMAP_ID or ESETROOT_PMAP_ID property. Compatible programs
+are Esetroot, hsetroot and feh.
-You should build one binary with the default options. F<configure>
+2. Use a simple pixmap and emulate pseudo-transparency. This enables you
-now enables most useful options, and the trend goes to making them
+to use effects other than tinting and shading: Just shade/tint/whatever
-runtime-switchable, too, so there is usually no drawback to enbaling them,
+your picture with gimp or any other tool:
-except higher disk and possibly memory usage. The perl interpreter should
-be enabled, as important functionality (menus, selection, likely more in
-the future) depends on it.
-You should not overwrite the C<perl-ext-common> snd C<perl-ext> resources
+   convert wallpaper.jpg -blur 20x20 -modulate 30 background.jpg
-system-wide (except maybe with C<defaults>). This will result in useful
+   @@URXVT_NAME@@ -pixmap "background.jpg;:root"
-behaviour. If your distribution aims at low memory, add an empty
-C<perl-ext-common> resource to the app-defaults file. This will keep the
-perl interpreter disabled until the user enables it.
-If you can/want build more binaries, I recommend building a minimal
+That works. If you think it doesn't, you lack GDK-PixBuf support, or you
-one with C<--disable-everything> (very useful) and a maximal one with
+are unable to read.
-C<--enable-everything> (less useful, it will be very big due to a lot of
-encodings built-in that increase download times and are rarely used).
-=item I need to make it setuid/setgid to support utmp/ptys on my OS, is this safe?
+3. Use an ARGB visual:
-It should be, starting with release 7.1. You are encouraged to properly
+   @@URXVT_NAME@@ -depth 32 -fg grey90 -bg rgba:0000/0000/4444/cccc
-install urxvt with privileges necessary for your OS now.
-When rxvt-unicode detects that it runs setuid or setgid, it will fork
+This requires XFT support, and the support of your X-server. If that
-into a helper process for privileged operations (pty handling on some
+doesn't work for you, blame Xorg and Keith Packard. ARGB visuals aren't
-systems, utmp/wtmp/lastlog handling on others) and drop privileges
+there yet, no matter what they claim. Rxvt-Unicode contains the necessary
-immediately. This is much safer than most other terminals that keep
+bugfixes and workarounds for Xft and Xlib to make it work, but that
-privileges while running (but is more relevant to urxvt, as it contains
+doesn't mean that your WM has the required kludges in place.
-things as perl interpreters, which might be "helpful" to attackers).
-This forking is done as the very first within main(), which is very early
+4. Use xcompmgr and let it do the job:
-and reduces possible bugs to initialisation code run before main(), or
-things like the dynamic loader of your system, which should result in very
-little risk.
-=item When I log-in to another system it tells me about missing terminfo data?
+  xprop -frame -f _NET_WM_WINDOW_OPACITY 32c \
+        -set _NET_WM_WINDOW_OPACITY 0xc0000000
-The terminal description used by rxvt-unicode is not as widely available
+Then click on a window you want to make transparent. Replace C<0xc0000000>
-as that for xterm, or even rxvt (for which the same problem often arises).
+by other values to change the degree of opacity. If it doesn't work and
+your server crashes, you got to keep the pieces.
-The correct solution for this problem is to install the terminfo, this can
-be done like this (with ncurses' infocmp):
-   REMOTE=remotesystem.domain
-   infocmp rxvt-unicode | ssh $REMOTE "cat >/tmp/ti && tic /tmp/ti"
-... or by installing rxvt-unicode normally on the remote system,
-If you cannot or do not want to do this, then you can simply set
-C<TERM=rxvt> or even C<TERM=xterm>, and live with the small number of
-problems arising, which includes wrong keymapping, less and different
-colours and some refresh errors in fullscreen applications. It's a nice
-quick-and-dirty workaround for rare cases, though.
-If you always want to do this (and are fine with the consequences) you
-can either recompile rxvt-unicode with the desired TERM value or use a
-resource to set it:
-   URxvt.termName: rxvt
-If you don't plan to use B<rxvt> (quite common...) you could also replace
-the rxvt terminfo file with the rxvt-unicode one.
-=item C<tic> outputs some error when compiling the terminfo entry.
-Most likely it's the empty definition for C<enacs=>. Just replace it by
-C<enacs=\E[0@> and try again.
-=item C<bash>'s readline does not work correctly under @@RXVT_NAME@@.
-=item I need a termcap file entry.
-One reason you might want this is that some distributions or operating
-systems still compile some programs using the long-obsoleted termcap
-library (Fedora Core's bash is one example) and rely on a termcap entry
-for C<rxvt-unicode>.
-You could use rxvt's termcap entry with resonable results in many cases.
-You can also create a termcap entry by using terminfo's infocmp program
-like this:
-   infocmp -C rxvt-unicode
-Or you could use this termcap entry, generated by the command above:
-   rxvt-unicode|rxvt-unicode terminal (X Window System):\
-           :am:bw:eo:km:mi:ms:xn:xo:\
-           :co#80:it#8:li#24:lm#0:\
-           :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-           :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
-           :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=\E(B:al=\E[L:\
-           :as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
-           :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
-           :dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
-           :i1=\E[?47l\E=\E[?1l:ic=\E[@:im=\E[4h:\
-           :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\
-           :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
-           :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
-           :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\
-           :kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
-           :mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:rc=\E8:\
-           :sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
-           :te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:\
-           :us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
-           :vs=\E[?25h:
-=item Why does C<ls> no longer have coloured output?
-The C<ls> in the GNU coreutils unfortunately doesn't use terminfo to
-decide wether a terminal has colour, but uses it's own configuration
-file. Needless to say, C<rxvt-unicode> is not in it's default file (among
-with most other terminals supporting colour). Either add:
-   TERM rxvt-unicode
-to C</etc/DIR_COLORS> or simply add:
-   alias ls='ls --color=auto'
-to your C<.profile> or C<.bashrc>.
-=item Why doesn't vim/emacs etc. use the 88 colour mode?
-=item Why doesn't vim/emacs etc. make use of italic?
-=item Why are the secondary screen-related options not working properly?
-Make sure you are using C<TERM=rxvt-unicode>. Some pre-packaged
-distributions (most notably Debian GNU/Linux) break rxvt-unicode
-by setting C<TERM> to C<rxvt>, which doesn't have these extra
-features. Unfortunately, some of these (most notably, again, Debian
-GNU/Linux) furthermore fail to even install the C<rxvt-unicode> terminfo
-file, so you will need to install it on your own (See the question B<When
-I log-in to another system it tells me about missing terminfo data?> on
-how to do this).
-=item My numerical keypad acts weird and generates differing output?
-Some Debian GNUL/Linux users seem to have this problem, although no
-specific details were reported so far. It is possible that this is caused
-by the wrong C<TERM> setting, although the details of wether and how
-this can happen are unknown, as C<TERM=rxvt> should offer a compatible
-keymap. See the answer to the previous question, and please report if that
-helped.
-=item Rxvt-unicode does not seem to understand the selected encoding?
-=item Unicode does not seem to work?
-If you encounter strange problems like typing an accented character but
-getting two unrelated other characters or similar, or if program output is
-subtly garbled, then you should check your locale settings.
-Rxvt-unicode must be started with the same C<LC_CTYPE> setting as the
-programs. Often rxvt-unicode is started in the C<C> locale, while the
-login script running within the rxvt-unicode window changes the locale to
-something else, e.g. C<en_GB.UTF-8>. Needless to say, this is not going to work.
-The best thing is to fix your startup environment, as you will likely run
-into other problems. If nothing works you can try this in your .profile.
-  printf '\e]701;%s\007' "$LC_CTYPE"
-If this doesn't work, then maybe you use a C<LC_CTYPE> specification not
-supported on your systems. Some systems have a C<locale> command which
-displays this (also, C<perl -e0> can be used to check locale settings, as
-it will complain loudly if it cannot set the locale). If it displays something
-like:
-  locale: Cannot set LC_CTYPE to default locale: ...
-Then the locale you specified is not supported on your system.
-If nothing works and you are sure that everything is set correctly then
-you will need to remember a little known fact: Some programs just don't
-support locales :(
-=item Why do some characters look so much different than others?
-=item How does rxvt-unicode choose fonts?
-Most fonts do not contain the full range of Unicode, which is
-fine. Chances are that the font you (or the admin/package maintainer of
-your system/os) have specified does not cover all the characters you want
-to display.
-B<rxvt-unicode> makes a best-effort try at finding a replacement
-font. Often the result is fine, but sometimes the chosen font looks
-bad/ugly/wrong. Some fonts have totally strange characters that don't
-resemble the correct glyph at all, and rxvt-unicode lacks the artificial
-intelligence to detect that a specific glyph is wrong: it has to believe
-the font that the characters it claims to contain indeed look correct.
-In that case, select a font of your taste and add it to the font list,
-e.g.:
-   @@RXVT_NAME@@ -fn basefont,font2,font3...
-When rxvt-unicode sees a character, it will first look at the base
-font. If the base font does not contain the character, it will go to the
-next font, and so on. Specifying your own fonts will also speed up this
-search and use less resources within rxvt-unicode and the X-server.
-The only limitation is that none of the fonts may be larger than the base
-font, as the base font defines the terminal character cell size, which
-must be the same due to the way terminals work.
-=item Why do some chinese characters look so different than others?
-This is because there is a difference between script and language --
-rxvt-unicode does not know which language the text that is output is,
-as it only knows the unicode character codes. If rxvt-unicode first
-sees a japanese/chinese character, it might choose a japanese font for
-display. Subsequent japanese characters will use that font. Now, many
-chinese characters aren't represented in japanese fonts, so when the first
-non-japanese character comes up, rxvt-unicode will look for a chinese font
--- unfortunately at this point, it will still use the japanese font for
-chinese characters that are also in the japanese font.
-The workaround is easy: just tag a chinese font at the end of your font
-list (see the previous question). The key is to view the font list as
-a preference list: If you expect more japanese, list a japanese font
-first. If you expect more chinese, put a chinese font first.
-In the future it might be possible to switch language preferences at
-runtime (the internal data structure has no problem with using different
-fonts for the same character at the same time, but no interface for this
-has been designed yet).
-Until then, you might get away with switching fonts at runtime (see L<Can
-I switch the fonts at runtime?> later in this document).
-=item Why does rxvt-unicode sometimes leave pixel droppings?
+=head3 Why does rxvt-unicode sometimes leave pixel droppings?
 Most fonts were not designed for terminal use, which means that character
 size varies a lot. A font that is otherwise fine for terminal use might
 contain some characters that are simply too wide. Rxvt-unicode will avoid
 these characters. For characters that are just "a bit" too wide a special
 however: Xft fonts often draw glyphs larger than their acclaimed bounding
 box, and rxvt-unicode has no way of detecting this (the correct way is to
 ask for the character bounding box, which unfortunately is wrong in these
 cases).
-It's not clear (to me at least), wether this is a bug in Xft, freetype,
+It's not clear (to me at least), whether this is a bug in Xft, freetype,
 or the respective font. If you encounter this problem you might try using
 the C<-lsp> option to give the font more height. If that doesn't work, you
 might be forced to use a different font.
 All of this is not a problem when using X11 core fonts, as their bounding
 box data is correct.
-=item On Solaris 9, many line-drawing characters are too wide.
-Seems to be a known bug, read
-L<http://nixdoc.net/files/forum/about34198.html>. Some people use the
-following ugly workaround to get non-double-wide-characters working:
-   #define wcwidth(x) wcwidth(x) > 1 ? 1 : wcwidth(x)
-=item My Compose (Multi_key) key is no longer working.
-The most common causes for this are that either your locale is not set
-correctly, or you specified a B<preeditStyle> that is not supported by
-your input method. For example, if you specified B<OverTheSpot> and
-your input method (e.g. the default input method handling Compose keys)
-does not support this (for instance because it is not visual), then
-rxvt-unicode will continue without an input method.
-In this case either do not specify a B<preeditStyle> or specify more than
-one pre-edit style, such as B<OverTheSpot,Root,None>.
-=item I cannot type C<Ctrl-Shift-2> to get an ASCII NUL character due to ISO 14755
-Either try C<Ctrl-2> alone (it often is mapped to ASCII NUL even on
-international keyboards) or simply use ISO 14755 support to your
-advantage, typing <Ctrl-Shift-0> to get a ASCII NUL. This works for other
-codes, too, such as C<Ctrl-Shift-1-d> to type the default telnet escape
-character and so on.
-=item How can I keep rxvt-unicode from using reverse video so much?
+=head3 How can I keep rxvt-unicode from using reverse video so much?
 First of all, make sure you are running with the right terminal settings
 (C<TERM=rxvt-unicode>), which will get rid of most of these effects. Then
 make sure you have specified colours for italic and bold, as otherwise
 rxvt-unicode might use reverse video to simulate the effect:
    URxvt.colorBD:  white
    URxvt.colorIT:  green
-=item Some programs assume totally weird colours (red instead of blue), how can I fix that?
+=head3 Some programs assume totally weird colours (red instead of blue), how can I fix that?
 For some unexplainable reason, some rare programs assume a very weird
 colour palette when confronted with a terminal with more than the standard
 8 colours (rxvt-unicode supports 88). The right fix is, of course, to fix
 these programs not to assume non-ISO colours without very good reasons.
 In the meantime, you can either edit your C<rxvt-unicode> terminfo
 definition to only claim 8 colour support or use C<TERM=rxvt>, which will
 fix colours but keep you from using other rxvt-unicode features.
-=item I am on FreeBSD and rxvt-unicode does not seem to work at all.
-Rxvt-unicode requires the symbol C<__STDC_ISO_10646__> to be defined
-in your compile environment, or an implementation that implements it,
-wether it defines the symbol or not. C<__STDC_ISO_10646__> requires that
-B<wchar_t> is represented as unicode.
-As you might have guessed, FreeBSD does neither define this symobl nor
-does it support it. Instead, it uses it's own internal representation of
-B<wchar_t>. This is, of course, completely fine with respect to standards.
-However, that means rxvt-unicode only works in C<POSIX>, C<ISO-8859-1> and
-C<UTF-8> locales under FreeBSD (which all use Unicode as B<wchar_t>.
-C<__STDC_ISO_10646__> is the only sane way to support multi-language
-apps in an OS, as using a locale-dependent (and non-standardized)
-representation of B<wchar_t> makes it impossible to convert between
-B<wchar_t> (as used by X11 and your applications) and any other encoding
-without implementing OS-specific-wrappers for each and every locale. There
-simply are no APIs to convert B<wchar_t> into anything except the current
-locale encoding.
-Some applications (such as the formidable B<mlterm>) work around this
-by carrying their own replacement functions for character set handling
-with them, and either implementing OS-dependent hacks or doing multiple
-conversions (which is slow and unreliable in case the OS implements
-encodings slightly different than the terminal emulator).
-The rxvt-unicode author insists that the right way to fix this is in the
-system libraries once and for all, instead of forcing every app to carry
-complete replacements for them :)
-=item I use Solaris 9 and it doesn't compile/work/etc.
-Try the diff in F<doc/solaris9.patch> as a base. It fixes the worst
-problems with C<wcwidth> and a compile problem.
-=item How can I use rxvt-unicode under cygwin?
-rxvt-unicode should compile and run out of the box on cygwin, using
-the X11 libraries that come with cygwin. libW11 emulation is no
-longer supported (and makes no sense, either, as it only supported a
-single font). I recommend starting the X-server in C<-multiwindow> or
-C<-rootless> mode instead, which will result in similar look&feel as the
-old libW11 emulation.
-At the time of this writing, cygwin didn't seem to support any multi-byte
-encodings (you might try C<LC_CTYPE=C-UTF-8>), so you are likely limited
-to 8-bit encodings.
-=item How does rxvt-unicode determine the encoding to use?
-=item Is there an option to switch encodings?
-Unlike some other terminals, rxvt-unicode has no encoding switch, and no
-specific "utf-8" mode, such as xterm. In fact, it doesn't even know about
-UTF-8 or any other encodings with respect to terminal I/O.
-The reasons is that there exists a perfectly fine mechanism for selecting
-the encoding, doing I/O and (most important) communicating this to all
-applications so everybody agrees on character properties such as width
-and code number. This mechanism is the I<locale>. Applications not using
-that info will have problems (for example, C<xterm> gets the width of
-characters wrong as it uses it's own, locale-independent table under all
-locales).
-Rxvt-unicode uses the C<LC_CTYPE> locale category to select encoding. All
-programs doing the same (that is, most) will automatically agree in the
-interpretation of characters.
-Unfortunately, there is no system-independent way to select locales, nor
-is there a standard on how locale specifiers will look like.
-On most systems, the content of the C<LC_CTYPE> environment variable
-contains an arbitrary string which corresponds to an already-installed
-locale. Common names for locales are C<en_US.UTF-8>, C<de_DE.ISO-8859-15>,
-C<ja_JP.EUC-JP>, i.e. C<language_country.encoding>, but other forms
-(i.e. C<de> or C<german>) are also common.
-Rxvt-unicode ignores all other locale categories, and except for
-the encoding, ignores country or language-specific settings,
-i.e. C<de_DE.UTF-8> and C<ja_JP.UTF-8> are the normally same to
-rxvt-unicode.
-If you want to use a specific encoding you have to make sure you start
-rxvt-unicode with the correct C<LC_CTYPE> category.
-=item Can I switch locales at runtime?
-Yes, using an escape sequence. Try something like this, which sets
-rxvt-unicode's idea of C<LC_CTYPE>.
-  printf '\e]701;%s\007' ja_JP.SJIS
-See also the previous answer.
-Sometimes this capability is rather handy when you want to work in
-one locale (e.g. C<de_DE.UTF-8>) but some programs don't support it
-(e.g. UTF-8). For example, I use this script to start C<xjdic>, which
-first switches to a locale supported by xjdic and back later:
-   printf '\e]701;%s\007' ja_JP.SJIS
-   xjdic -js
-   printf '\e]701;%s\007' de_DE.UTF-8
-You can also use xterm's C<luit> program, which usually works fine, except
-for some locales where character width differs between program- and
-rxvt-unicode-locales.
-=item Can I switch the fonts at runtime?
+=head3 Can I switch the fonts at runtime?
 Yes, using an escape sequence. Try something like this, which has the same
 effect as using the C<-fn> switch, and takes effect immediately:
-   printf '\e]50;%s\007' "9x15bold,xft:Kochi Gothic"
+   printf '\33]50;%s\007' "9x15bold,xft:Kochi Gothic"
 This is useful if you e.g. work primarily with japanese (and prefer a
 japanese font), but you have to switch to chinese temporarily, where
 japanese fonts would only be in your way.
 You can think of this as a kind of manual ISO-2022 switching.
-=item Why do italic characters look as if clipped?
+=head3 Why do italic characters look as if clipped?
 Many fonts have difficulties with italic characters and hinting. For
 example, the otherwise very nicely hinted font C<xft:Bitstream Vera Sans
-Mono> completely fails in it's italic face. A workaround might be to
+Mono> completely fails in its italic face. A workaround might be to
 enable freetype autohinting, i.e. like this:
    URxvt.italicFont:        xft:Bitstream Vera Sans Mono:italic:autohint=true
    URxvt.boldItalicFont:    xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
-=item My input method wants <some encoding> but I want UTF-8, what can I do?
-You can specify separate locales for the input method and the rest of the
-terminal, using the resource C<imlocale>:
-   URxvt.imlocale: ja_JP.EUC-JP
-Now you can start your terminal with C<LC_CTYPE=ja_JP.UTF-8> and still
-use your input method. Please note, however, that you will not be able to
-input characters outside C<EUC-JP> in a normal way then, as your input
-method limits you.
-=item Rxvt-unicode crashes when the X Input Method changes or exits.
-Unfortunately, this is unavoidable, as the XIM protocol is racy by
-design. Applications can avoid some crashes at the expense of memory
-leaks, and Input Methods can avoid some crashes by careful ordering at
-exit time. B<kinput2> (and derived input methods) generally succeeds,
-while B<SCIM> (or similar input methods) fails. In the end, however,
-crashes cannot be completely avoided even if both sides cooperate.
-So the only workaround is not to kill your Input Method Servers.
-=item Rxvt-unicode uses gobs of memory, how can I reduce that?
-Rxvt-unicode tries to obey the rule of not charging you for something you
-don't use. One thing you should try is to configure out all settings that
-you don't need, for example, Xft support is a resource hog by design,
-when used. Compiling it out ensures that no Xft font will be loaded
-accidentally when rxvt-unicode tries to find a font for your characters.
-Also, many people (me included) like large windows and even larger
-scrollback buffers: Without C<--enable-unicode3>, rxvt-unicode will use
-6 bytes per screen cell. For a 160x?? window this amounts to almost a
-kilobyte per line. A scrollback buffer of 10000 lines will then (if full)
-use 10 Megabytes of memory. With C<--enable-unicode3> it gets worse, as
-rxvt-unicode then uses 8 bytes per screen cell.
-=item Can I speed up Xft rendering somehow?
+=head3 Can I speed up Xft rendering somehow?
 Yes, the most obvious way to speed it up is to avoid Xft entirely, as
 it is simply slow. If you still want Xft fonts you might try to disable
 antialiasing (by appending C<:antialias=false>), which saves lots of
 memory and also speeds up rendering considerably.
-=item Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?
+=head3 Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?
 Rxvt-unicode will use whatever you specify as a font. If it needs to
-fall back to it's default font search list it will prefer X11 core
+fall back to its default font search list it will prefer X11 core
 fonts, because they are small and fast, and then use Xft fonts. It has
 antialiasing disabled for most of them, because the author thinks they
 look best that way.
 If you want antialiasing, you have to specify the fonts manually.
-=item Mouse cut/paste suddenly no longer works.
-Make sure that mouse reporting is actually turned off since killing
-some editors prematurely may leave the mouse in mouse report mode. I've
-heard that tcsh may use mouse reporting unless it otherwise specified. A
-quick check is to see if cut/paste works when the Alt or Shift keys are
-depressed.
-=item What's with this bold/blink stuff?
+=head3 What's with this bold/blink stuff?
 If no bold colour is set via C<colorBD:>, bold will invert text using the
 standard foreground colour.
-For the standard background colour, blinking will actually make the
+For the standard background colour, blinking will actually make
-text blink when compiled with C<--enable-blinking>. with standard
+the text blink when compiled with C<--enable-text-blink>. Without
-colours. Without C<--enable-blinking>, the blink attribute will be
+C<--enable-text-blink>, the blink attribute will be ignored.
-ignored.
 On ANSI colours, bold/blink attributes are used to set high-intensity
-foreground/background colors.
+foreground/background colours.
-color0-7 are the low-intensity colors.
+color0-7 are the low-intensity colours.
-color8-15 are the corresponding high-intensity colors.
+color8-15 are the corresponding high-intensity colours.
-=item I don't like the screen colors.  How do I change them?
+=head3 I don't like the screen colours.  How do I change them?
-You can change the screen colors at run-time using F<~/.Xdefaults>
+You can change the screen colours at run-time using F<~/.Xdefaults>
 resources (or as long-options).
 Here are values that are supposed to resemble a VGA screen,
 including the murky brown that passes for low-intensity yellow:
    URxvt.color12:  #0000FF
    URxvt.color13:  #FF00FF
    URxvt.color14:  #00FFFF
    URxvt.color15:  #FFFFFF
-And here is a more complete set of non-standard colors described (not by
+And here is a more complete set of non-standard colours.
-me) as "pretty girly".
    URxvt.cursorColor:  #dc74d1
    URxvt.pointerColor: #dc74d1
    URxvt.background:   #0e0e0e
    URxvt.foreground:   #4ad5e1
    URxvt.color6:       #73f7ff
    URxvt.color14:      #73f7ff
    URxvt.color7:       #e1dddd
    URxvt.color15:      #e1dddd
-=item How can I start @@RXVT_NAME@@d in a race-free way?
+They have been described (not by me) as "pretty girly".
-Try C<@@RXVT_NAME@@d -f -o>, which tells @@RXVT_NAME@@d to open the
+=head3 Why do some characters look so much different than others?
-display, create the listening socket and then fork.
+See next entry.
+=head3 How does rxvt-unicode choose fonts?
+Most fonts do not contain the full range of Unicode, which is
+fine. Chances are that the font you (or the admin/package maintainer of
+your system/os) have specified does not cover all the characters you want
+to display.
+B<rxvt-unicode> makes a best-effort try at finding a replacement
+font. Often the result is fine, but sometimes the chosen font looks
+bad/ugly/wrong. Some fonts have totally strange characters that don't
+resemble the correct glyph at all, and rxvt-unicode lacks the artificial
+intelligence to detect that a specific glyph is wrong: it has to believe
+the font that the characters it claims to contain indeed look correct.
+In that case, select a font of your taste and add it to the font list,
+e.g.:
+   @@URXVT_NAME@@ -fn basefont,font2,font3...
+When rxvt-unicode sees a character, it will first look at the base
+font. If the base font does not contain the character, it will go to the
+next font, and so on. Specifying your own fonts will also speed up this
+search and use less resources within rxvt-unicode and the X-server.
+The only limitation is that none of the fonts may be larger than the base
+font, as the base font defines the terminal character cell size, which
+must be the same due to the way terminals work.
+=head3 Why do some chinese characters look so different than others?
+This is because there is a difference between script and language --
+rxvt-unicode does not know which language the text that is output is,
+as it only knows the unicode character codes. If rxvt-unicode first
+sees a japanese/chinese character, it might choose a japanese font for
+display. Subsequent japanese characters will use that font. Now, many
+chinese characters aren't represented in japanese fonts, so when the first
+non-japanese character comes up, rxvt-unicode will look for a chinese font
+-- unfortunately at this point, it will still use the japanese font for
+chinese characters that are also in the japanese font.
+The workaround is easy: just tag a chinese font at the end of your font
+list (see the previous question). The key is to view the font list as
+a preference list: If you expect more japanese, list a japanese font
+first. If you expect more chinese, put a chinese font first.
+In the future it might be possible to switch language preferences at
+runtime (the internal data structure has no problem with using different
+fonts for the same character at the same time, but no interface for this
+has been designed yet).
+Until then, you might get away with switching fonts at runtime (see L<Can
+I switch the fonts at runtime?> later in this document).
+=head3 How can I make mplayer display video correctly?
+We are working on it, in the meantime, as a workaround, use something like:
+   @@URXVT_NAME@@ -b 600 -geometry 20x1 -e sh -c 'mplayer -wid $WINDOWID file...'
+=head3 Why is the cursor now blinking in emacs/vi/...?
+This is likely caused by your editor/program's use of the C<cvvis>
+terminfo capability. Emacs uses it by default, as well as some versions of
+vi and possibly other programs.
+In emacs, you can switch that off by adding this to your C<.emacs> file:
+   (setq visible-cursor nil)
+For other programs, if they do not have an option, your have to remove the
+C<cvvis> capability from the terminfo description.
+When @@URXVT_NAME@@ first added the blinking cursor option, it didn't
+add a C<cvvis> capability, which served no purpose before. Version 9.21
+introduced C<cvvis> (and the ability to control blinking independent of
+cursor shape) for compatibility with other terminals, which traditionally
+use a blinking cursor for C<cvvis>. This also reflects the intent of
+programs such as emacs, who expect C<cvvis> to enable a blinking cursor.
+=head2 Keyboard, Mouse & User Interaction
+=head3 The new selection selects pieces that are too big, how can I select single words?
+If you want to select e.g. alphanumeric words, you can use the following
+setting:
+   URxvt.selection.pattern-0: ([[:word:]]+)
+If you click more than twice, the selection will be extended
+more and more.
+To get a selection that is very similar to the old code, try this pattern:
+   URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\\\\]^`{|})]+)
+Please also note that the I<LeftClick Shift-LeftClick> combination also
+selects words like the old code.
+=head3 I don't like the new selection/popups/hotkeys/perl, how do I change/disable it?
+You can disable the perl extension completely by setting the
+B<perl-ext-common> resource to the empty string, which also keeps
+rxvt-unicode from initialising perl, saving memory.
+If you only want to disable specific features, you first have to
+identify which perl extension is responsible. For this, read the section
+B<PREPACKAGED EXTENSIONS> in the @@URXVT_NAME@@perl(3) manpage. For
+example, to disable the B<selection-popup> and B<option-popup>, specify
+this B<perl-ext-common> resource:
+   URxvt.perl-ext-common: default,-selection-popup,-option-popup
+This will keep the default extensions, but disable the two popup
+extensions. Some extensions can also be configured, for example,
+scrollback search mode is triggered by B<M-s>. You can move it to any
+other combination by adding a B<keysym> resource that binds the desired
+combination to the C<start> action of C<searchable-scrollback> and another
+one that binds B<M-s> to the C<builtin:> action:
+   URxvt.keysym.CM-s: searchable-scrollback:start
+   URxvt.keysym.M-s: builtin:
+=head3 The cursor moves when selecting text in the current input line, how do I switch this off?
+See next entry.
+=head3 During rlogin/ssh/telnet/etc. sessions, clicking near the cursor outputs strange escape sequences, how do I fix this?
+These are caused by the C<readline> perl extension. Under normal
+circumstances, it will move your cursor around when you click into the
+line that contains it. It tries hard not to do this at the wrong moment,
+but when running a program that doesn't parse cursor movements or in some
+cases during rlogin sessions, it fails to detect this properly.
+You can permanently switch this feature off by disabling the C<readline>
+extension:
+   URxvt.perl-ext-common: default,-readline
+=head3 My numeric keypad acts weird and generates differing output?
+Some Debian GNU/Linux users seem to have this problem, although no
+specific details were reported so far. It is possible that this is caused
+by the wrong C<TERM> setting, although the details of whether and how
+this can happen are unknown, as C<TERM=rxvt> should offer a compatible
+keymap. See the answer to the previous question, and please report if that
+helped.
+=head3 My Compose (Multi_key) key is no longer working.
+The most common causes for this are that either your locale is not set
+correctly, or you specified a B<preeditType> that is not supported by
+your input method. For example, if you specified B<OverTheSpot> and
+your input method (e.g. the default input method handling Compose keys)
+does not support this (for instance because it is not visual), then
+rxvt-unicode will continue without an input method.
+In this case either do not specify a B<preeditType> or specify more than
+one pre-edit style, such as B<OverTheSpot,Root,None>.
+If it still doesn't work, then maybe your input method doesn't support
+compose sequences - to fall back to the built-in one, make sure you don't
+specify an input method via C<-im> or C<XMODIFIERS>.
+=head3 I cannot type C<Ctrl-Shift-2> to get an ASCII NUL character due to ISO 14755
+Either try C<Ctrl-2> alone (it often is mapped to ASCII NUL even on
+international keyboards) or simply use ISO 14755 support to your
+advantage, typing <Ctrl-Shift-0> to get a ASCII NUL. This works for other
+codes, too, such as C<Ctrl-Shift-1-d> to type the default telnet escape
+character and so on.
+=head3 Mouse cut/paste suddenly no longer works.
+Make sure that mouse reporting is actually turned off since killing
+some editors prematurely may leave it active. I've
+heard that tcsh may use mouse reporting unless it is otherwise specified. A
+quick check is to see if cut/paste works when the Alt or Shift keys are
+pressed.
-=item What's with the strange Backspace/Delete key behaviour?
+=head3 What's with the strange Backspace/Delete key behaviour?
 Assuming that the physical Backspace key corresponds to the
-BackSpace keysym (not likely for Linux ... see the following
+Backspace keysym (not likely for Linux ... see the following
 question) there are two standard values that can be used for
 Backspace: C<^H> and C<^?>.
 Historically, either value is correct, but rxvt-unicode adopts the debian
-policy of using C<^?> when unsure, because it's the one only only correct
+policy of using C<^?> when unsure, because it's the one and only correct
 choice :).
-Rxvt-unicode tries to inherit the current stty settings and uses the value
+It is possible to toggle between C<^H> and C<^?> with the DECBKM
-of `erase' to guess the value for backspace.  If rxvt-unicode wasn't
+private mode:
-started from a terminal (say, from a menu or by remote shell), then the
-system value of `erase', which corresponds to CERASE in <termios.h>, will
-be used (which may not be the same as your stty setting).
-For starting a new rxvt-unicode:
    # use Backspace = ^H
    $ stty erase ^H
-   $ @@RXVT_NAME@@
+   $ printf "\e[?67h"
    # use Backspace = ^?
    $ stty erase ^?
-   $ @@RXVT_NAME@@
+   $ printf "\e[?67l"
-Toggle with C<ESC [ 36 h> / C<ESC [ 36 l>.
-For an existing rxvt-unicode:
-   # use Backspace = ^H
-   $ stty erase ^H
-   $ echo -n "^[[36h"
-   # use Backspace = ^?
-   $ stty erase ^?
-   $ echo -n "^[[36l"
 This helps satisfy some of the Backspace discrepancies that occur, but
 if you use Backspace = C<^H>, make sure that the termcap/terminfo value
 properly reflects that.
 some editors (vim I'm told) expect Backspace = ^H,
 GNU Emacs (and Emacs-like editors) use ^H for help.
 Perhaps someday this will all be resolved in a consistent manner.
-=item I don't like the key-bindings.  How do I change them?
+=head3 I don't like the key-bindings.  How do I change them?
 There are some compile-time selections available via configure. Unless
 you have run "configure" with the C<--disable-resources> option you can
 use the `keysym' resource to alter the keystrings associated with keysyms.
-Here's an example for a URxvt session started using C<@@RXVT_NAME@@ -name URxvt>
+Here's an example for a URxvt session started using C<@@URXVT_NAME@@ -name URxvt>
+   URxvt.keysym.Prior:         \033[5~
+   URxvt.keysym.Next:          \033[6~
-   URxvt.keysym.Home:          \033[1~
+   URxvt.keysym.Home:          \033[7~
-   URxvt.keysym.End:           \033[4~
+   URxvt.keysym.End:           \033[8~
-   URxvt.keysym.C-apostrophe:  \033<C-'>
-   URxvt.keysym.C-slash:       \033<C-/>
-   URxvt.keysym.C-semicolon:   \033<C-;>
-   URxvt.keysym.C-grave:       \033<C-`>
-   URxvt.keysym.C-comma:       \033<C-,>
-   URxvt.keysym.C-period:      \033<C-.>
-   URxvt.keysym.C-0x60:        \033<C-`>
-   URxvt.keysym.C-Tab:         \033<C-Tab>
-   URxvt.keysym.C-Return:      \033<C-Return>
-   URxvt.keysym.S-Return:      \033<S-Return>
-   URxvt.keysym.S-space:       \033<S-Space>
-   URxvt.keysym.M-Up:          \033<M-Up>
+   URxvt.keysym.Up:            \033[A
-   URxvt.keysym.M-Down:        \033<M-Down>
+   URxvt.keysym.Down:          \033[B
+   URxvt.keysym.Right:         \033[C
-   URxvt.keysym.M-Left:        \033<M-Left>
+   URxvt.keysym.Left:          \033[D
-   URxvt.keysym.M-Right:       \033<M-Right>
-   URxvt.keysym.M-C-0:         list \033<M-C- 0123456789 >
-   URxvt.keysym.M-C-a:         list \033<M-C- abcdefghijklmnopqrstuvwxyz >
-   URxvt.keysym.F12:           command:\033]701;zh_CN.GBK\007
 See some more examples in the documentation for the B<keysym> resource.
-=item I'm using keyboard model XXX that has extra Prior/Next/Insert keys.
+=head3 I'm using keyboard model XXX that has extra Prior/Next/Insert keys. How do I make use of them? For example, the Sun Keyboard type 4 has the following map
-How do I make use of them?  For example, the Sun Keyboard type 4
-has the following mappings that rxvt-unicode doesn't recognize.
    KP_Insert == Insert
    F22 == Print
    F27 == Home
    F29 == Prior
 Rather than have rxvt-unicode try to accommodate all the various possible
 keyboard mappings, it is better to use `xmodmap' to remap the keys as
 required for your particular machine.
-=item How do I distinguish wether I'm running rxvt-unicode or a regular xterm?
-I need this to decide about setting colors etc.
-rxvt and rxvt-unicode always export the variable "COLORTERM", so you can
+=head2 Terminal Configuration
-check and see if that is set. Note that several programs, JED, slrn,
-Midnight Commander automatically check this variable to decide whether or
-not to use color.
-=item How do I set the correct, full IP address for the DISPLAY variable?
+=head3 Can I see a typical configuration?
-If you've compiled rxvt-unicode with DISPLAY_IS_IP and have enabled
+The default configuration tries to be xterm-like, which I don't like that
-insecure mode then it is possible to use the following shell script
+much, but it's least surprise to regular users.
-snippets to correctly set the display. If your version of rxvt-unicode
-wasn't also compiled with ESCZ_ANSWER (as assumed in these snippets) then
-the COLORTERM variable can be used to distinguish rxvt-unicode from a
-regular xterm.
-Courtesy of Chuck Blake <cblake@BBN.COM> with the following shell script
+As a rxvt or rxvt-unicode user, you are practically supposed to invest
-snippets:
+time into customising your terminal. To get you started, here is the
+author's .Xdefaults entries, with comments on what they do. It's certainly
+not I<typical>, but what's typical...
-   # Bourne/Korn/POSIX family of shells:
+   URxvt.cutchars: "()*,<>[]{}|'
-   [ ${TERM:-foo} = foo ] && TERM=xterm # assume an xterm if we don't know
+   URxvt.print-pipe: cat >/tmp/xxx
-   if [ ${TERM:-foo} = xterm ]; then
-      stty -icanon -echo min 0 time 15 # see if enhanced rxvt or not
-      echo -n '^[Z'
-      read term_id
-      stty icanon echo
-      if [ ""${term_id} = '^[[?1;2C' -a ${DISPLAY:-foo} = foo ]; then
-         echo -n '^[[7n'     	# query the rxvt we are in for the DISPLAY string
-         read DISPLAY     	# set it in our local shell
-      fi
-   fi
-=item How do I compile the manual pages for myself?
+These are just for testing stuff.
-You need to have a recent version of perl installed as F</usr/bin/perl>,
+   URxvt.imLocale: ja_JP.UTF-8
-one that comes with F<pod2man>, F<pod2text> and F<pod2html>. Then go to
+   URxvt.preeditType: OnTheSpot,None
-the doc subdirectory and enter C<make alldoc>.
-=item My question isn't answered here, can I ask a human?
+This tells rxvt-unicode to use a special locale when communicating with
+the X Input Method, and also tells it to only use the OnTheSpot pre-edit
+type, which requires the C<xim-onthespot> perl extension but rewards me
+with correct-looking fonts.
-Before sending me mail, you could go to IRC: C<irc.freenode.net>,
+   URxvt.perl-lib: /root/lib/urxvt
-channel C<#rxvt-unicode> has some rxvt-unicode enthusiasts that might be
+   URxvt.perl-ext-common: default,selection-autotransform,selection-pastebin,xim-onthespot,remote-clipboard
-interested in learning about new and exciting problems (but not FAQs :).
+   URxvt.selection.pattern-0: ( at .*? line \\d+)
+   URxvt.selection.pattern-1: ^(/[^:]+):\
+   URxvt.selection-autotransform.0: s/^([^:[:space:]]+):(\\d+):?$/:e \\Q$1\\E\\x0d:$2\\x0d/
+   URxvt.selection-autotransform.1: s/^ at (.*?) line (\\d+)$/:e \\Q$1\\E\\x0d:$2\\x0d/
+This is my perl configuration. The first two set the perl library
+directory and also tells urxvt to use a large number of extensions. I
+develop for myself mostly, so I actually use most of the extensions I
+write.
+The selection stuff mainly makes the selection perl-error-message aware
+and tells it to convert perl error messages into vi-commands to load the
+relevant file and go to the error line number.
+   URxvt.scrollstyle:      plain
+   URxvt.secondaryScroll:  true
+As the documentation says: plain is the preferred scrollbar for the
+author. The C<secondaryScroll> configures urxvt to scroll in full-screen
+apps, like screen, so lines scrolled out of screen end up in urxvt's
+scrollback buffer.
+   URxvt.background:       #000000
+   URxvt.foreground:       gray90
+   URxvt.color7:           gray90
+   URxvt.colorBD:          #ffffff
+   URxvt.cursorColor:      #e0e080
+   URxvt.throughColor:     #8080f0
+   URxvt.highlightColor:   #f0f0f0
+Some colours. Not sure which ones are being used or even non-defaults, but
+these are in my .Xdefaults. Most notably, they set foreground/background
+to light gray/black, and also make sure that the colour 7 matches the
+default foreground colour.
+   URxvt.underlineColor:   yellow
+Another colour, makes underline lines look different. Sometimes hurts, but
+is mostly a nice effect.
+   URxvt.geometry:         154x36
+   URxvt.loginShell:       false
+   URxvt.meta:             ignore
+   URxvt.utmpInhibit:      true
+Uh, well, should be mostly self-explanatory. By specifying some defaults
+manually, I can quickly switch them for testing.
+   URxvt.saveLines:        8192
+A large scrollback buffer is essential. Really.
+   URxvt.mapAlert:         true
+The only case I use it is for my IRC window, which I like to keep
+iconified till people msg me (which beeps).
+   URxvt.visualBell:       true
+The audible bell is often annoying, especially when in a crowd.
+   URxvt.insecure:         true
+Please don't hack my mutt! Ooops...
+   URxvt.pastableTabs:     false
+I once thought this is a great idea.
+   urxvt.font:             9x15bold,\
+                           -misc-fixed-bold-r-normal--15-140-75-75-c-90-iso10646-1,\
+                           -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1, \
+                           [codeset=JISX0208]xft:Kochi Gothic, \
+                           xft:Bitstream Vera Sans Mono:autohint=true, \
+                           xft:Code2000:antialias=false
+   urxvt.boldFont:         -xos4-terminus-bold-r-normal--14-140-72-72-c-80-iso8859-15
+   urxvt.italicFont:       xft:Bitstream Vera Sans Mono:italic:autohint=true
+   urxvt.boldItalicFont:   xft:Bitstream Vera Sans Mono:bold:italic:autohint=true
+I wrote rxvt-unicode to be able to specify fonts exactly. So don't be
+overwhelmed. A special note: the C<9x15bold> mentioned above is actually
+the version from XFree-3.3, as XFree-4 replaced it by a totally different
+font (different glyphs for C<;> and many other harmless characters),
+while the second font is actually the C<9x15bold> from XFree4/XOrg. The
+bold version has less chars than the medium version, so I use it for rare
+characters, too. When editing sources with vim, I use italic for comments
+and other stuff, which looks quite good with Bitstream Vera anti-aliased.
+Terminus is a quite bad font (many very wrong glyphs), but for most of my
+purposes, it works, and gives a different look, as my normal (Non-bold)
+font is already bold, and I want to see a difference between bold and
+normal fonts.
+Please note that I used the C<urxvt> instance name and not the C<URxvt>
+class name. That is because I use different configs for different purposes,
+for example, my IRC window is started with C<-name IRC>, and uses these
+defaults:
+   IRC*title:              IRC
+   IRC*geometry:           87x12+535+542
+   IRC*saveLines:          0
+   IRC*mapAlert:           true
+   IRC*font:               suxuseuro
+   IRC*boldFont:           suxuseuro
+   IRC*colorBD:            white
+   IRC*keysym.M-C-1:       command:\033]710;suxuseuro\007\033]711;suxuseuro\007
+   IRC*keysym.M-C-2:       command:\033]710;9x15bold\007\033]711;9x15bold\007
+C<Alt-Ctrl-1> and C<Alt-Ctrl-2> switch between two different font
+sizes. C<suxuseuro> allows me to keep an eye (and actually read)
+stuff while keeping a very small window. If somebody pastes something
+complicated (e.g. japanese), I temporarily switch to a larger font.
+The above is all in my C<.Xdefaults> (I don't use C<.Xresources> nor
+C<xrdb>). I also have some resources in a separate C<.Xdefaults-hostname>
+file for different hosts, for example, on my main desktop, I use:
+   URxvt.keysym.C-M-q: command:\033[3;5;5t
+   URxvt.keysym.C-M-y: command:\033[3;5;606t
+   URxvt.keysym.C-M-e: command:\033[3;1605;5t
+   URxvt.keysym.C-M-c: command:\033[3;1605;606t
+   URxvt.keysym.C-M-p: perl:test
+The first for keysym definitions allow me to quickly bring some windows
+in the layout I like most. Ion users might start laughing but will stop
+immediately when I tell them that I use my own Fvwm2 module for much the
+same effect as Ion provides, and I only very rarely use the above key
+combinations :->
+=head3 Why doesn't rxvt-unicode read my resources?
+Well, why, indeed? It does, in a way very similar to other X
+applications. Most importantly, this means that if you or your OS loads
+resources into the X display (the right way to do it), rxvt-unicode will
+ignore any resource files in your home directory. It will only read
+F<$HOME/.Xdefaults> when no resources are attached to the display.
+If you have or use an F<$HOME/.Xresources> file, chances are that
+resources are loaded into your X-server. In this case, you have to
+re-login after every change (or run F<xrdb -merge $HOME/.Xresources>).
+Also consider the form resources have to use:
+  URxvt.resource: value
+If you want to use another form (there are lots of different ways of
+specifying resources), make sure you understand whether and why it
+works. If unsure, use the form above.
+=head3 When I log-in to another system it tells me about missing terminfo data?
+The terminal description used by rxvt-unicode is not as widely available
+as that for xterm, or even rxvt (for which the same problem often arises).
+The correct solution for this problem is to install the terminfo, this can
+be done by simply installing rxvt-unicode on the remote system as well
+(in case you have a nice package manager ready), or you can install the
+terminfo database manually like this (with ncurses infocmp. works as
+user and root):
+   REMOTE=remotesystem.domain
+   infocmp rxvt-unicode | ssh $REMOTE "mkdir -p .terminfo && cat >/tmp/ti && tic /tmp/ti"
+One some systems you might need to set C<$TERMINFO> to the full path of
+F<$HOME/.terminfo> for this to work.
+If you cannot or do not want to do this, then you can simply set
+C<TERM=rxvt> or even C<TERM=xterm>, and live with the small number of
+problems arising, which includes wrong keymapping, less and different
+colours and some refresh errors in fullscreen applications. It's a nice
+quick-and-dirty workaround for rare cases, though.
+If you always want to do this (and are fine with the consequences) you
+can either recompile rxvt-unicode with the desired TERM value or use a
+resource to set it:
+   URxvt.termName: rxvt
+If you don't plan to use B<rxvt> (quite common...) you could also replace
+the rxvt terminfo file with the rxvt-unicode one and use C<TERM=rxvt>.
+=head3 nano fails with "Error opening terminal: rxvt-unicode"
+This exceptionally confusing and useless error message is printed by nano
+when it can't find the terminfo database. Nothing is wrong with your
+terminal, read the previous answer for a solution.
+=head3 C<tic> outputs some error when compiling the terminfo entry.
+Most likely it's the empty definition for C<enacs=>. Just replace it by
+C<enacs=\E[0@> and try again.
+=head3 C<bash>'s readline does not work correctly under @@URXVT_NAME@@.
+See next entry.
+=head3 I need a termcap file entry.
+One reason you might want this is that some distributions or operating
+systems still compile some programs using the long-obsoleted termcap
+library (Fedora's bash is one example) and rely on a termcap entry
+for C<rxvt-unicode>.
+You could use rxvt's termcap entry with reasonable results in many cases.
+You can also create a termcap entry by using terminfo's infocmp program
+like this:
+   infocmp -C rxvt-unicode
+Or you could use the termcap entry in doc/etc/rxvt-unicode.termcap,
+generated by the command above.
+=head3 Why does C<ls> no longer have coloured output?
+The C<ls> in the GNU coreutils unfortunately doesn't use terminfo to
+decide whether a terminal has colour, but uses its own configuration
+file. Needless to say, C<rxvt-unicode> is not in its default file (among
+with most other terminals supporting colour). Either add:
+   TERM rxvt-unicode
+to C</etc/DIR_COLORS> or simply add:
+   alias ls='ls --color=auto'
+to your C<.profile> or C<.bashrc>.
+=head3 Why doesn't vim/emacs etc. use the 88 colour mode?
+See next entry.
+=head3 Why doesn't vim/emacs etc. make use of italic?
+See next entry.
+=head3 Why are the secondary screen-related options not working properly?
+Make sure you are using C<TERM=rxvt-unicode>. Some pre-packaged
+distributions break rxvt-unicode by setting C<TERM> to C<rxvt>, which
+doesn't have these extra features. Unfortunately, some of these
+furthermore fail to even install the C<rxvt-unicode> terminfo file, so
+you will need to install it on your own (See the question B<When I
+log-in to another system it tells me about missing terminfo data?> on
+how to do this).
+=head2 Encoding / Locale / Input Method Issues
+=head3 Rxvt-unicode does not seem to understand the selected encoding?
+See next entry.
+=head3 Unicode does not seem to work?
+If you encounter strange problems like typing an accented character but
+getting two unrelated other characters or similar, or if program output is
+subtly garbled, then you should check your locale settings.
+Rxvt-unicode must be started with the same C<LC_CTYPE> setting as the
+programs running in it. Often rxvt-unicode is started in the C<C> locale,
+while the login script running within the rxvt-unicode window changes the
+locale to something else, e.g. C<en_GB.UTF-8>. Needless to say, this is
+not going to work, and is the most common cause for problems.
+The best thing is to fix your startup environment, as you will likely run
+into other problems. If nothing works you can try this in your .profile.
+  printf '\33]701;%s\007' "$LC_CTYPE"   # $LANG or $LC_ALL are worth a try, too
+If this doesn't work, then maybe you use a C<LC_CTYPE> specification not
+supported on your systems. Some systems have a C<locale> command which
+displays this (also, C<perl -e0> can be used to check locale settings, as
+it will complain loudly if it cannot set the locale). If it displays something
+like:
+  locale: Cannot set LC_CTYPE to default locale: ...
+Then the locale you specified is not supported on your system.
+If nothing works and you are sure that everything is set correctly then
+you will need to remember a little known fact: Some programs just don't
+support locales :(
+=head3 How does rxvt-unicode determine the encoding to use?
+See next entry.
+=head3 Is there an option to switch encodings?
+Unlike some other terminals, rxvt-unicode has no encoding switch, and no
+specific "utf-8" mode, such as xterm. In fact, it doesn't even know about
+UTF-8 or any other encodings with respect to terminal I/O.
+The reasons is that there exists a perfectly fine mechanism for selecting
+the encoding, doing I/O and (most important) communicating this to all
+applications so everybody agrees on character properties such as width
+and code number. This mechanism is the I<locale>. Applications not using
+that info will have problems (for example, C<xterm> gets the width of
+characters wrong as it uses its own, locale-independent table under all
+locales).
+Rxvt-unicode uses the C<LC_CTYPE> locale category to select encoding. All
+programs doing the same (that is, most) will automatically agree in the
+interpretation of characters.
+Unfortunately, there is no system-independent way to select locales, nor
+is there a standard on how locale specifiers will look like.
+On most systems, the content of the C<LC_CTYPE> environment variable
+contains an arbitrary string which corresponds to an already-installed
+locale. Common names for locales are C<en_US.UTF-8>, C<de_DE.ISO-8859-15>,
+C<ja_JP.EUC-JP>, i.e. C<language_country.encoding>, but other forms
+(i.e. C<de> or C<german>) are also common.
+Rxvt-unicode ignores all other locale categories, and except for
+the encoding, ignores country or language-specific settings,
+i.e. C<de_DE.UTF-8> and C<ja_JP.UTF-8> are the normally same to
+rxvt-unicode.
+If you want to use a specific encoding you have to make sure you start
+rxvt-unicode with the correct C<LC_CTYPE> category.
+=head3 Can I switch locales at runtime?
+Yes, using an escape sequence. Try something like this, which sets
+rxvt-unicode's idea of C<LC_CTYPE>.
+  printf '\33]701;%s\007' ja_JP.SJIS
+See also the previous answer.
+Sometimes this capability is rather handy when you want to work in
+one locale (e.g. C<de_DE.UTF-8>) but some programs don't support it
+(e.g. UTF-8). For example, I use this script to start C<xjdic>, which
+first switches to a locale supported by xjdic and back later:
+   printf '\33]701;%s\007' ja_JP.SJIS
+   xjdic -js
+   printf '\33]701;%s\007' de_DE.UTF-8
+You can also use xterm's C<luit> program, which usually works fine, except
+for some locales where character width differs between program- and
+rxvt-unicode-locales.
+=head3 I have problems getting my input method working.
+Try a search engine, as this is slightly different for every input method server.
+Here is a checklist:
+=over 4
+=item - Make sure your locale I<and> the imLocale are supported on your OS.
+Try C<locale -a> or check the documentation for your OS.
+=item - Make sure your locale or imLocale matches a locale supported by your XIM.
+For example, B<kinput2> does not support UTF-8 locales, you should use
+C<ja_JP.EUC-JP> or equivalent.
+=item - Make sure your XIM server is actually running.
+=item - Make sure the C<XMODIFIERS> environment variable is set correctly when I<starting> rxvt-unicode.
+When you want to use e.g. B<kinput2>, it must be set to
+C<@im=kinput2>. For B<scim>, use C<@im=SCIM>. You can see what input
+method servers are running with this command:
+   xprop -root XIM_SERVERS
 =back
+=head3 My input method wants <some encoding> but I want UTF-8, what can I do?
+You can specify separate locales for the input method and the rest of the
+terminal, using the resource C<imlocale>:
+   URxvt.imlocale: ja_JP.EUC-JP
+Now you can start your terminal with C<LC_CTYPE=ja_JP.UTF-8> and still
+use your input method. Please note, however, that, depending on your Xlib
+version, you may not be able to input characters outside C<EUC-JP> in a
+normal way then, as your input method limits you.
+=head3 Rxvt-unicode crashes when the X Input Method changes or exits.
+Unfortunately, this is unavoidable, as the XIM protocol is racy by
+design. Applications can avoid some crashes at the expense of memory
+leaks, and Input Methods can avoid some crashes by careful ordering at
+exit time. B<kinput2> (and derived input methods) generally succeeds,
+while B<SCIM> (or similar input methods) fails. In the end, however,
+crashes cannot be completely avoided even if both sides cooperate.
+So the only workaround is not to kill your Input Method Servers.
+=head2 Operating Systems / Package Maintaining
+=head3 I am maintaining rxvt-unicode for distribution/OS XXX, any recommendation?
+You should build one binary with the default options. F<configure>
+now enables most useful options, and the trend goes to making them
+runtime-switchable, too, so there is usually no drawback to enabling them,
+except higher disk and possibly memory usage. The perl interpreter should
+be enabled, as important functionality (menus, selection, likely more in
+the future) depends on it.
+You should not overwrite the C<perl-ext-common> and C<perl-ext> resources
+system-wide (except maybe with C<defaults>). This will result in useful
+behaviour. If your distribution aims at low memory, add an empty
+C<perl-ext-common> resource to the app-defaults file. This will keep the
+perl interpreter disabled until the user enables it.
+If you can/want build more binaries, I recommend building a minimal
+one with C<--disable-everything> (very useful) and a maximal one with
+C<--enable-everything> (less useful, it will be very big due to a lot of
+encodings built-in that increase download times and are rarely used).
+=head3 I need to make it setuid/setgid to support utmp/ptys on my OS, is this safe?
+It should be, starting with release 7.1. You are encouraged to properly
+install urxvt with privileges necessary for your OS now.
+When rxvt-unicode detects that it runs setuid or setgid, it will fork
+into a helper process for privileged operations (pty handling on some
+systems, utmp/wtmp/lastlog handling on others) and drop privileges
+immediately. This is much safer than most other terminals that keep
+privileges while running (but is more relevant to urxvt, as it contains
+things as perl interpreters, which might be "helpful" to attackers).
+This forking is done as the very first within main(), which is very early
+and reduces possible bugs to initialisation code run before main(), or
+things like the dynamic loader of your system, which should result in very
+little risk.
+=head3 I am on FreeBSD and rxvt-unicode does not seem to work at all.
+Rxvt-unicode requires the symbol C<__STDC_ISO_10646__> to be defined
+in your compile environment, or an implementation that implements it,
+whether it defines the symbol or not. C<__STDC_ISO_10646__> requires that
+B<wchar_t> is represented as unicode.
+As you might have guessed, FreeBSD does neither define this symbol nor
+does it support it. Instead, it uses its own internal representation of
+B<wchar_t>. This is, of course, completely fine with respect to standards.
+However, that means rxvt-unicode only works in C<POSIX>, C<ISO-8859-1> and
+C<UTF-8> locales under FreeBSD (which all use Unicode as B<wchar_t>).
+C<__STDC_ISO_10646__> is the only sane way to support multi-language
+apps in an OS, as using a locale-dependent (and non-standardized)
+representation of B<wchar_t> makes it impossible to convert between
+B<wchar_t> (as used by X11 and your applications) and any other encoding
+without implementing OS-specific-wrappers for each and every locale. There
+simply are no APIs to convert B<wchar_t> into anything except the current
+locale encoding.
+Some applications (such as the formidable B<mlterm>) work around this
+by carrying their own replacement functions for character set handling
+with them, and either implementing OS-dependent hacks or doing multiple
+conversions (which is slow and unreliable in case the OS implements
+encodings slightly different than the terminal emulator).
+The rxvt-unicode author insists that the right way to fix this is in the
+system libraries once and for all, instead of forcing every app to carry
+complete replacements for them :)
+=head3 How can I use rxvt-unicode under cygwin?
+rxvt-unicode should compile and run out of the box on cygwin, using
+the X11 libraries that come with cygwin. libW11 emulation is no
+longer supported (and makes no sense, either, as it only supported a
+single font). I recommend starting the X-server in C<-multiwindow> or
+C<-rootless> mode instead, which will result in similar look&feel as the
+old libW11 emulation.
+At the time of this writing, cygwin didn't seem to support any multi-byte
+encodings (you might try C<LC_CTYPE=C-UTF-8>), so you are likely limited
+to 8-bit encodings.
+=head3 Character widths are not correct.
+urxvt uses the system wcwidth function to know the information about
+the width of characters, so on systems with incorrect locale data you
+will likely get bad results. Two notorious examples are Solaris 9,
+where single-width characters like U+2514 are reported as double-width,
+and Darwin 8, where combining chars are reported having width 1.
+The solution is to upgrade your system or switch to a better one. A
+possibly working workaround is to use a wcwidth implementation like
+http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c
-=head1 RXVT TECHNICAL REFERENCE
+=head1 RXVT-UNICODE TECHNICAL REFERENCE
-=head1 DESCRIPTION
 The rest of this document describes various technical aspects of
 B<rxvt-unicode>. First the description of supported command sequences,
 followed by pixmap support and last by a description of all features
 selectable at C<configure> time.
-=head1 Definitions
+=head2 Definitions
 =over 4
 =item B<< C<c> >>
-The literal character c.
+The literal character c (potentially a multi-byte character).
 =item B<< C<C> >>
 A single (required) character.
 A text parameter composed of printable characters.
 =back
-=head1 Values
+=head2 Values
 =over 4
 =item B<< C<ENQ> >>
 =item B<< C<SI> >>
 Shift In (Ctrl-O), invokes the G0 character set (the default).
 Switch to Standard Character Set
-=item B<< C<SPC> >>
+=item B<< C<SP> >>
 Space Character
 =back
-=head1 Escape Sequences
+=head2 Escape Sequences
 =over 4
 =item B<< C<ESC # 8> >>
 =item B<< C<ESC => >>
 Application Keypad (SMKX). See also next sequence.
-=item B<<< C<< ESC >> >>>
+=item B<<< C<< ESC > >> >>>
 Normal Keypad (RMKX)
-B<Note:> If the numeric keypad is activated, eg, B<Num_Lock> has been
-pressed, numbers or control functions are generated by the numeric keypad
+B<Note:> numbers or control functions are generated by the numeric
-(see Key Codes).
+keypad in normal or application mode, respectively (see Key Codes).
 =item B<< C<ESC D> >>
 Index (IND)
 Where B<< C<C> >> is one of:
 =begin table
-	C = C<0> 	DEC Special Character and Line Drawing Set
+	C = C<0>	DEC Special Character and Line Drawing Set
-	C = C<A> 	United Kingdom (UK)
+	C = C<A>	United Kingdom (UK)
-	C = C<B> 	United States (USASCII)
+	C = C<B>	United States (USASCII)
 	C = C<< < >>	Multinational character set I<unimplemented>
-	C = C<5> 	Finnish character set I<unimplemented>
+	C = C<5>	Finnish character set I<unimplemented>
-	C = C<C> 	Finnish character set I<unimplemented>
+	C = C<C>	Finnish character set I<unimplemented>
-	C = C<K> 	German character set I<unimplemented>
+	C = C<K>	German character set I<unimplemented>
 =end table
 =back
 X<CSI>
-=head1 CSI (Command Sequence Introducer) Sequences
+=head2 CSI (Command Sequence Introducer) Sequences
 =over 4
 =item B<< C<ESC [ Ps @> >>
 Erase in Display (ED)
 =begin table
-	B<< C<Ps = 0> >>	Clear Below (default)
+	B<< C<Ps = 0> >>	Clear Right and Below (default)
-	B<< C<Ps = 1> >>	Clear Above
+	B<< C<Ps = 1> >>	Clear Left and Above
 	B<< C<Ps = 2> >>	Clear All
 =end table
 =item B<< C<ESC [ Ps K> >>
 =begin table
 	B<< C<Ps = 0> >>	Clear to Right (default)
 	B<< C<Ps = 1> >>	Clear to Left
 	B<< C<Ps = 2> >>	Clear All
+	B<< C<Ps = 3> >>	Like Ps = 0, but is ignored when wrapped
+				(@@RXVT_NAME@@ extension)
 =end table
 =item B<< C<ESC [ Ps L> >>
 Character Attributes (SGR)
 =begin table
-	B<< C<Ps = 0> >>	Normal (default)
+	B<< C<Pm = 0> >>	Normal (default)
-	B<< C<Ps = 1 / 21> >>	On / Off Bold (bright fg)
+	B<< C<Pm = 1 / 21> >>	On / Off Bold (bright fg)
-	B<< C<Ps = 3 / 23> >>	On / Off Italic
+	B<< C<Pm = 3 / 23> >>	On / Off Italic
-	B<< C<Ps = 4 / 24> >>	On / Off Underline
+	B<< C<Pm = 4 / 24> >>	On / Off Underline
-	B<< C<Ps = 5 / 25> >>	On / Off Slow Blink (bright bg)
+	B<< C<Pm = 5 / 25> >>	On / Off Slow Blink (bright bg)
-	B<< C<Ps = 6 / 26> >>	On / Off Rapid Blink (bright bg)
+	B<< C<Pm = 6 / 26> >>	On / Off Rapid Blink (bright bg)
-	B<< C<Ps = 7 / 27> >>	On / Off Inverse
+	B<< C<Pm = 7 / 27> >>	On / Off Inverse
-	B<< C<Ps = 8 / 27> >>	On / Off Invisible (NYI)
+	B<< C<Pm = 8 / 27> >>	On / Off Invisible (NYI)
-	B<< C<Ps = 30 / 40> >>	fg/bg Black
+	B<< C<Pm = 30 / 40> >>	fg/bg Black
-	B<< C<Ps = 31 / 41> >>	fg/bg Red
+	B<< C<Pm = 31 / 41> >>	fg/bg Red
-	B<< C<Ps = 32 / 42> >>	fg/bg Green
+	B<< C<Pm = 32 / 42> >>	fg/bg Green
-	B<< C<Ps = 33 / 43> >>	fg/bg Yellow
+	B<< C<Pm = 33 / 43> >>	fg/bg Yellow
-	B<< C<Ps = 34 / 44> >>	fg/bg Blue
+	B<< C<Pm = 34 / 44> >>	fg/bg Blue
-	B<< C<Ps = 35 / 45> >>	fg/bg Magenta
+	B<< C<Pm = 35 / 45> >>	fg/bg Magenta
-	B<< C<Ps = 36 / 46> >>	fg/bg Cyan
+	B<< C<Pm = 36 / 46> >>	fg/bg Cyan
+	B<< C<Pm = 37 / 47> >>	fg/bg White
-	B<< C<Ps = 38;5 / 48;5> >>	set fg/bg to color #m (ISO 8613-6)
+	B<< C<Pm = 38;5 / 48;5> >>	set fg/bg to colour #m (ISO 8613-6)
-	B<< C<Ps = 37 / 47> >>	fg/bg White
-	B<< C<Ps = 39 / 49> >>	fg/bg Default
+	B<< C<Pm = 39 / 49> >>	fg/bg Default
-	B<< C<Ps = 90 / 100> >>	fg/bg Bright Black
+	B<< C<Pm = 90 / 100> >>	fg/bg Bright Black
-	B<< C<Ps = 91 / 101> >>	fg/bg Bright Red
+	B<< C<Pm = 91 / 101> >>	fg/bg Bright Red
-	B<< C<Ps = 92 / 102> >>	fg/bg Bright Green
+	B<< C<Pm = 92 / 102> >>	fg/bg Bright Green
-	B<< C<Ps = 93 / 103> >>	fg/bg Bright Yellow
+	B<< C<Pm = 93 / 103> >>	fg/bg Bright Yellow
-	B<< C<Ps = 94 / 104> >>	fg/bg Bright Blue
+	B<< C<Pm = 94 / 104> >>	fg/bg Bright Blue
-	B<< C<Ps = 95 / 105> >>	fg/bg Bright Magenta
+	B<< C<Pm = 95 / 105> >>	fg/bg Bright Magenta
-	B<< C<Ps = 96 / 106> >>	fg/bg Bright Cyan
+	B<< C<Pm = 96 / 106> >>	fg/bg Bright Cyan
-	B<< C<Ps = 97 / 107> >>	fg/bg Bright White
+	B<< C<Pm = 97 / 107> >>	fg/bg Bright White
-	B<< C<Ps = 99 / 109> >>	fg/bg Bright Default
+	B<< C<Pm = 99 / 109> >>	fg/bg Bright Default
 =end table
 =item B<< C<ESC [ Ps n> >>
 	B<< C<Ps = 5> >>	Status Report B<< C<ESC [ 0 n> >> (``OK'')
 	B<< C<Ps = 6> >>	Report Cursor Position (CPR) [row;column] as B<< C<ESC [ r ; c R> >>
 	B<< C<Ps = 7> >>	Request Display Name
 	B<< C<Ps = 8> >>	Request Version Number (place in window title)
+=end table
+=item B<< C<ESC [ Ps SP q> >>
+Set Cursor Style (DECSCUSR)
+=begin table
+	B<< C<Ps = 0> >>	Blink Block
+	B<< C<Ps = 1> >>	Blink Block
+	B<< C<Ps = 2> >>	Steady Block
+	B<< C<Ps = 3> >>	Blink Underline
+	B<< C<Ps = 4> >>	Steady Underline
+	B<< C<Ps = 5> >>	Blink Bar (XTerm)
+	B<< C<Ps = 6> >>	Steady Bar (XTerm)
 =end table
 =item B<< C<ESC [ Ps;Ps r> >>
 =back
 X<PrivateModes>
-=head1 DEC Private Modes
+=head2 DEC Private Modes
 =over 4
 =item B<< C<ESC [ ? Pm h> >>
 Toggle DEC Private Mode Values (rxvt extension). I<where>
 =over 4
-=item B<< C<Ps = 1> >> (DECCKM)
+=item B<< C<Pm = 1> >> (DECCKM)
 =begin table
 	B<< C<h> >>	Application Cursor Keys
 	B<< C<l> >>	Normal Cursor Keys
 =end table
-=item B<< C<Ps = 2> >> (ANSI/VT52 mode)
+=item B<< C<Pm = 2> >> (DECANM)
 =begin table
 	B<< C<h> >>	Enter VT52 mode
 	B<< C<l> >>	Enter VT52 mode
 =end table
-=item B<< C<Ps = 3> >>
+=item B<< C<Pm = 3> >> (DECCOLM)
 =begin table
-	B<< C<h> >>	132 Column Mode (DECCOLM)
+	B<< C<h> >>	132 Column Mode
-	B<< C<l> >>	80 Column Mode (DECCOLM)
+	B<< C<l> >>	80 Column Mode
-=end table
-=item B<< C<Ps = 4> >>
-=begin table
+=end table
+=item B<< C<Pm = 4> >> (DECSCLM)
+=begin table
-	B<< C<h> >>	Smooth (Slow) Scroll (DECSCLM)
+	B<< C<h> >>	Smooth (Slow) Scroll
-	B<< C<l> >>	Jump (Fast) Scroll (DECSCLM)
+	B<< C<l> >>	Jump (Fast) Scroll
-=end table
-=item B<< C<Ps = 5> >>
-=begin table
+=end table
+=item B<< C<Pm = 5> >> (DECSCNM)
+=begin table
-	B<< C<h> >>	Reverse Video (DECSCNM)
+	B<< C<h> >>	Reverse Video
-	B<< C<l> >>	Normal Video (DECSCNM)
+	B<< C<l> >>	Normal Video
-=end table
-=item B<< C<Ps = 6> >>
-=begin table
+=end table
+=item B<< C<Pm = 6> >> (DECOM)
+=begin table
-	B<< C<h> >>	Origin Mode (DECOM)
+	B<< C<h> >>	Origin Mode
-	B<< C<l> >>	Normal Cursor Mode (DECOM)
+	B<< C<l> >>	Normal Cursor Mode
-=end table
-=item B<< C<Ps = 7> >>
-=begin table
+=end table
+=item B<< C<Pm = 7> >> (DECAWM)
+=begin table
-	B<< C<h> >>	Wraparound Mode (DECAWM)
+	B<< C<h> >>	Wraparound Mode
-	B<< C<l> >>	No Wraparound Mode (DECAWM)
+	B<< C<l> >>	No Wraparound Mode
 =end table
-=item B<< C<Ps = 8> >> I<unimplemented>
+=item B<< C<Pm = 8> >> (DECARM) I<unimplemented>
 =begin table
-	B<< C<h> >>	Auto-repeat Keys (DECARM)
+	B<< C<h> >>	Auto-repeat Keys
-	B<< C<l> >>	No Auto-repeat Keys (DECARM)
+	B<< C<l> >>	No Auto-repeat Keys
 =end table
-=item B<< C<Ps = 9> >> X10 XTerm
+=item B<< C<Pm = 9> >> (X10 XTerm mouse protocol)
 =begin table
 	B<< C<h> >>	Send Mouse X & Y on button press.
 	B<< C<l> >>	No mouse reporting.
 =end table
+=item B<< C<Pm = 12> >> (AT&T 610, XTerm)
+=begin table
+	B<< C<h> >>	Blinking cursor (cvvis)
+	B<< C<l> >>	Steady cursor (cnorm)
+=end table
-=item B<< C<Ps = 25> >>
+=item B<< C<Pm = 25> >> (DECTCEM)
 =begin table
 	B<< C<h> >>	Visible cursor {cnorm/cvvis}
 	B<< C<l> >>	Invisible cursor {civis}
 =end table
-=item B<< C<Ps = 30> >>
+=item B<< C<Pm = 30> >> (B<rxvt>)
 =begin table
-	B<< C<h> >>	scrollBar visisble
+	B<< C<h> >>	scrollBar visible
-	B<< C<l> >>	scrollBar invisisble
+	B<< C<l> >>	scrollBar invisible
 =end table
-=item B<< C<Ps = 35> >> (B<rxvt>)
+=item B<< C<Pm = 35> >> (B<rxvt>)
 =begin table
 	B<< C<h> >>	Allow XTerm Shift+key sequences
 	B<< C<l> >>	Disallow XTerm Shift+key sequences
 =end table
-=item B<< C<Ps = 38> >> I<unimplemented>
+=item B<< C<Pm = 38> >> I<unimplemented>
 Enter Tektronix Mode (DECTEK)
-=item B<< C<Ps = 40> >>
+=item B<< C<Pm = 40> >>
 =begin table
 	B<< C<h> >>	Allow 80/132 Mode
 	B<< C<l> >>	Disallow 80/132 Mode
 =end table
-=item B<< C<Ps = 44> >> I<unimplemented>
+=item B<< C<Pm = 44> >> I<unimplemented>
 =begin table
 	B<< C<h> >>	Turn On Margin Bell
 	B<< C<l> >>	Turn Off Margin Bell
 =end table
-=item B<< C<Ps = 45> >> I<unimplemented>
+=item B<< C<Pm = 45> >> I<unimplemented>
 =begin table
 	B<< C<h> >>	Reverse-wraparound Mode
 	B<< C<l> >>	No Reverse-wraparound Mode
 =end table
-=item B<< C<Ps = 46> >> I<unimplemented>
+=item B<< C<Pm = 46> >> I<unimplemented>
-=item B<< C<Ps = 47> >>
+=item B<< C<Pm = 47> >>
 =begin table
 	B<< C<h> >>	Use Alternate Screen Buffer
 	B<< C<l> >>	Use Normal Screen Buffer
 =end table
 X<Priv66>
-=item B<< C<Ps = 66> >>
+=item B<< C<Pm = 66> >> (DECNKM)
 =begin table
-	B<< C<h> >>	Application Keypad (DECPAM) == C<ESC =>
+	B<< C<h> >>	Application Keypad (DECKPAM/DECPAM) == C<ESC =>
-	B<< C<l> >>	Normal Keypad (DECPNM) == C<< ESC > >>
+	B<< C<l> >>	Normal Keypad (DECKPNM/DECPNM) == C<< ESC > >>
-=end table
-=item B<< C<Ps = 67> >>
-=begin table
+=end table
+=item B<< C<Pm = 67> >> (DECBKM)
+=begin table
-	B<< C<h> >>	Backspace key sends B<< C<BS> (DECBKM) >>
+	B<< C<h> >>	Backspace key sends B<< C<BS> >>
 	B<< C<l> >>	Backspace key sends B<< C<DEL> >>
 =end table
-=item B<< C<Ps = 1000> >> (X11 XTerm)
+=item B<< C<Pm = 1000> >> (X11 XTerm mouse protocol)
 =begin table
 	B<< C<h> >>	Send Mouse X & Y on button press and release.
 	B<< C<l> >>	No mouse reporting.
 =end table
-=item B<< C<Ps = 1001> >> (X11 XTerm) I<unimplemented>
+=item B<< C<Pm = 1001> >> (X11 XTerm) I<unimplemented>
 =begin table
 	B<< C<h> >>	Use Hilite Mouse Tracking.
 	B<< C<l> >>	No mouse reporting.
 =end table
+=item B<< C<Pm = 1002> >> (X11 XTerm cell motion mouse tracking)
+=begin table
+	B<< C<h> >>	Send Mouse X & Y on button press and release, and motion with a button pressed.
+	B<< C<l> >>	No mouse reporting.
+=end table
+=item B<< C<Pm = 1003> >> (X11 XTerm all motion mouse tracking)
+=begin table
+	B<< C<h> >>	Send Mouse X & Y on button press and release, and motion.
+	B<< C<l> >>	No mouse reporting.
+=end table
+=item B<< C<Pm = 1004> >> (X11 XTerm focus in/focus out events)
+=begin table
+	B<< C<h> >>	Send Mouse focus in/focus out events.
+	B<< C<l> >>	Don't send focus events.
+=end table
+=item B<< C<Pm = 1005> >> (X11 XTerm UTF-8 mouse mode) (Compile frills)
+Try to avoid this mode, it doesn't work sensibly in non-UTF-8 locales. Use
+mode C<1015> instead.
+Unlike XTerm, coordinates larger than 2015) will work fine.
+=begin table
+	B<< C<h> >>	Enable mouse coordinates in locale-specific encoding.
+	B<< C<l> >>	Enable mouse coordinates as binary octets.
+=end table
-=item B<< C<Ps = 1010> >> (B<rxvt>)
+=item B<< C<Pm = 1010> >> (B<rxvt>)
 =begin table
 	B<< C<h> >>	Don't scroll to bottom on TTY output
 	B<< C<l> >>	Scroll to bottom on TTY output
 =end table
-=item B<< C<Ps = 1011> >> (B<rxvt>)
+=item B<< C<Pm = 1011> >> (B<rxvt>)
 =begin table
 	B<< C<h> >>	Scroll to bottom when a key is pressed
 	B<< C<l> >>	Don't scroll to bottom when a key is pressed
 =end table
+=item B<< C<Pm = 1015> >> (B<rxvt-unicode>) (Compile frills)
+=begin table
+	B<< C<h> >>	Enable urxvt mouse coordinate reporting.
+	B<< C<l> >>	Use old-style C<CSI M C C C> encoding.
+=end table
+Changes all mouse reporting codes to use decimal parameters instead of
+octets or characters.
+This mode should be enabled I<before> actually enabling mouse reporting,
+for semi-obvious reasons.
+The sequences received for various modes are as follows:
+   ESC [ M o o o    !1005, !1015 (three octets)
+   ESC [ M c c c    1005, !1015 (three characters)
+   ESC [ Pm M       1015 (three or more numeric parameters)
+The first three parameters are C<code>, C<x> and C<y>. Code is the numeric
+code as for the other modes (but encoded as a decimal number, including
+the additional offset of 32, so you have to subtract 32 first), C<x> and
+C<y> are the coordinates (1|1 is the upper left corner, just as with
+cursor positioning).
+Example: Shift-Button-1 press at top row, column 80.
+   ESC [ 37 ; 80 ; 1 M
+One can use this feature by simply enabling it and then looking for
+parameters to the C<ESC [ M> reply - if there are any, this mode is
+active, otherwise one of the old reporting styles is used.
+Other (to be implemented) reply sequences will use a similar encoding.
+In the future, more parameters might get added (pixel coordinates for
+example - anybody out there who needs this?).
-=item B<< C<Ps = 1021> >> (B<rxvt>)
+=item B<< C<Pm = 1021> >> (B<rxvt>)
 =begin table
 	B<< C<h> >>	Bold/italic implies high intensity (see option B<-is>)
 	B<< C<l> >>	Font styles have no effect on intensity (Compile styles)
 =end table
-=item B<< C<Ps = 1047> >>
+=item B<< C<Pm = 1047> >> (X11 XTerm alternate screen buffer)
 =begin table
 	B<< C<h> >>	Use Alternate Screen Buffer
 	B<< C<l> >>	Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it
 =end table
-=item B<< C<Ps = 1048> >>
+=item B<< C<Pm = 1048> >> (X11 XTerm alternate DECSC)
 =begin table
 	B<< C<h> >>	Save cursor position
 	B<< C<l> >>	Restore cursor position
 =end table
-=item B<< C<Ps = 1049> >>
+=item B<< C<Pm = 1049> >> (X11 XTerm 1047 + 1048)
 =begin table
 	B<< C<h> >>	Use Alternate Screen Buffer - clear Alternate Screen Buffer if switching to it
 	B<< C<l> >>	Use Normal Screen Buffer
 =end table
+=item B<< C<Pm = 2004> >> (X11 XTerm bracketed paste mode)
+=begin table
+	B<< C<h> >>	Enable bracketed paste mode - prepend / append to the pasted text the control sequences C<ESC [ 200 ~> / C<ESC [ 201 ~>
+	B<< C<l> >>	Disable bracketed paste mode
+=end table
 =back
 =back
 X<XTerm>
-=head1 XTerm Operating System Commands
+=head2 XTerm Operating System Commands
 =over 4
 =item B<< C<ESC ] Ps;Pt ST> >>
 	B<< C<Ps = 0> >>	Change Icon Name and Window Title to B<< C<Pt> >>
 	B<< C<Ps = 1> >>	Change Icon Name to B<< C<Pt> >>
 	B<< C<Ps = 2> >>	Change Window Title to B<< C<Pt> >>
 	B<< C<Ps = 3> >>	If B<< C<Pt> >> starts with a B<< C<?> >>, query the (STRING) property of the window and return it. If B<< C<Pt> >> contains a B<< C<=> >>, set the named property to the given value, else delete the specified property.
 	B<< C<Ps = 4> >>	B<< C<Pt> >> is a semi-colon separated sequence of one or more semi-colon separated B<number>/B<name> pairs, where B<number> is an index to a colour and B<name> is the name of a colour. Each pair causes the B<number>ed colour to be changed to B<name>. Numbers 0-7 corresponds to low-intensity (normal) colours and 8-15 corresponds to high-intensity colours. 0=black, 1=red, 2=green, 3=yellow, 4=blue, 5=magenta, 6=cyan, 7=white
-	B<< C<Ps = 10> >>	Change colour of text foreground to B<< C<Pt> >> B<(NB: may change in future)>
+	B<< C<Ps = 10> >>	Change colour of text foreground to B<< C<Pt> >>
-	B<< C<Ps = 11> >>	Change colour of text background to B<< C<Pt> >> B<(NB: may change in future)>
+	B<< C<Ps = 11> >>	Change colour of text background to B<< C<Pt> >>
 	B<< C<Ps = 12> >>	Change colour of text cursor foreground to B<< C<Pt> >>
 	B<< C<Ps = 13> >>	Change colour of mouse foreground to B<< C<Pt> >>
-	B<< C<Ps = 17> >>	Change colour of highlight characters to B<< C<Pt> >>
+	B<< C<Ps = 17> >>	Change background colour of highlight characters to B<< C<Pt> >>
-	B<< C<Ps = 18> >>	Change colour of bold characters to B<< C<Pt> >> [deprecated, see 706]
+	B<< C<Ps = 19> >>	Change foreground colour of highlight characters to B<< C<Pt> >>
-	B<< C<Ps = 19> >>	Change colour of underlined characters to B<< C<Pt> >> [deprecated, see 707]
-	B<< C<Ps = 20> >>	Change background pixmap parameters (see section XPM) (Compile XPM).
+	B<< C<Ps = 20> >>	Change background pixmap parameters (see section BACKGROUND IMAGE) (Compile pixbuf).
-	B<< C<Ps = 39> >>	Change default foreground colour to B<< C<Pt> >>.
+	B<< C<Ps = 39> >>	Change default foreground colour to B<< C<Pt> >>. [deprecated, use 10]
 	B<< C<Ps = 46> >>	Change Log File to B<< C<Pt> >> I<unimplemented>
-	B<< C<Ps = 49> >>	Change default background colour to B<< C<Pt> >>.
+	B<< C<Ps = 49> >>	Change default background colour to B<< C<Pt> >>. [deprecated, use 11]
 	B<< C<Ps = 50> >>	Set fontset to B<< C<Pt> >>, with the following special values of B<< C<Pt> >> (B<rxvt>) B<< C<#+n> >> change up B<< C<n> >> B<< C<#-n> >> change down B<< C<n> >> if B<< C<n> >> is missing of 0, a value of 1 is used I<empty> change to font0 B<< C<n> >> change to font B<< C<n> >>
-	B<< C<Ps = 55> >>	Log all scrollback buffer and all of screen to B<< C<Pt> >>
+	B<< C<Ps = 55> >>	Log all scrollback buffer and all of screen to B<< C<Pt> >> [disabled]
 	B<< C<Ps = 701> >>	Change current locale to B<< C<Pt> >>, or, if B<< C<Pt> >> is B<< C<?> >>, return the current locale (Compile frills).
+	B<< C<Ps = 702> >>	Request version if B<< C<Pt> >> is B<< C<?> >>, returning C<rxvt-unicode>, the resource name, the major and minor version numbers, e.g. C<ESC ] 702 ; rxvt-unicode ; urxvt ; 7 ; 4 ST>.
 	B<< C<Ps = 704> >>	Change colour of italic characters to B<< C<Pt> >>
 	B<< C<Ps = 705> >>	Change background pixmap tint colour to B<< C<Pt> >> (Compile transparency).
 	B<< C<Ps = 706> >>	Change colour of bold characters to B<< C<Pt> >>
 	B<< C<Ps = 707> >>	Change colour of underlined characters to B<< C<Pt> >>
+	B<< C<Ps = 708> >>	Change colour of the border to B<< C<Pt> >>
 	B<< C<Ps = 710> >>	Set normal fontset to B<< C<Pt> >>. Same as C<Ps = 50>.
 	B<< C<Ps = 711> >>	Set bold fontset to B<< C<Pt> >>. Similar to C<Ps = 50> (Compile styles).
 	B<< C<Ps = 712> >>	Set italic fontset to B<< C<Pt> >>. Similar to C<Ps = 50> (Compile styles).
 	B<< C<Ps = 713> >>	Set bold-italic fontset to B<< C<Pt> >>. Similar to C<Ps = 50> (Compile styles).
 	B<< C<Ps = 720> >>	Move viewing window up by B<< C<Pt> >> lines, or clear scrollback buffer if C<Pt = 0> (Compile frills).
 =end table
 =back
-X<XPM>
+=head1 BACKGROUND IMAGE
-=head1 XPM
-For the XPM XTerm escape sequence B<< C<ESC ] 20 ; Pt ST> >> then value
+For the BACKGROUND IMAGE XTerm escape sequence B<< C<ESC ] 20 ; Pt ST> >> the value
-of B<< C<Pt> >> can be the name of the background pixmap followed by a
+of B<< C<Pt> >> can be one of the following commands:
-sequence of scaling/positioning commands separated by semi-colons. The
-scaling/positioning commands are as follows:
 =over 4
-=item query scale/position
+=item B<< C<?> >>
-B<?>
+display scale and position in the title
+=item B<< C<;WxH+X+Y> >>
-=item change scale and position
+change scale and/or position
-B<WxH+X+Y>
+=item B<< C<FILE;WxH+X+Y> >>
-B<WxH+X> (== B<WxH+X+X>)
+change background image
-B<WxH> (same as B<WxH+50+50>)
-B<W+X+Y> (same as B<WxW+X+Y>)
-B<W+X> (same as B<WxW+X+X>)
-B<W> (same as B<WxW+50+50>)
-=item change position (absolute)
-B<=+X+Y>
-B<=+X> (same as B<=+X+Y>)
-=item change position (relative)
-B<+X+Y>
-B<+X> (same as B<+X+Y>)
-=item rescale (relative)
-B<Wx0> -> B<W *= (W/100)>
-B<0xH> -> B<H *= (H/100)>
 =back
-For example:
-=over 4
-=item B<\E]20;funky\a>
-load B<funky.xpm> as a tiled image
-=item B<\E]20;mona;100\a>
-load B<mona.xpm> with a scaling of 100%
-=item B<\E]20;;200;?\a>
-rescale the current pixmap to 200% and display the image geometry in
-the title
-=back
 X<Mouse>
 =head1 Mouse Reporting
 =over 4
 The upper bits of B<< C<< <b> >> >> indicate the modifiers when the
 button was pressed and are added together (X11 mouse report only):
 =over 4
-=item State = B<< C<< (<b> - SPACE) & 60 >> >>
+=item State = B<< C<< (<b> - SPACE) & ~3 >> >>
 =begin table
 	4	Shift
 	8	Meta
 	16	Control
+	32	Motion Notify
-	32	Double Click I<(Rxvt extension)>
+	32	Double Click I<(rxvt extension)>, disabled by default
+	64	Button1 is actually Button4, Button2 is actually Button5 etc.
 =end table
 Col = B<< C<< <x> - SPACE >> >>
 Row = B<< C<< <y> - SPACE >> >>
 =back
+=head1 Key Codes
 X<KeyCodes>
-=head1 Key Codes
 Note: B<Shift> + B<F1>-B<F10> generates B<F11>-B<F20>
-For the keypad, use B<Shift> to temporarily override Application-Keypad
+For the keypad, use B<Shift> to temporarily toggle Application Keypad
-setting use B<Num_Lock> to toggle Application-Keypad setting if
+mode and use B<Num_Lock> to override Application Keypad mode, i.e. if
-B<Num_Lock> is off, toggle Application-Keypad setting. Also note that
+B<Num_Lock> is on the keypad is in normal mode. Also note that the
-values of B<Home>, B<End>, B<Delete> may have been compiled differently on
+values of B<BackSpace>, B<Delete> may have been compiled differently
-your system.
+on your system.
 =begin table
 		B<Normal>	B<Shift>	B<Control>	B<Ctrl+Shift>
 	Tab	^I	ESC [ Z	^I	ESC [ Z
-	BackSpace	^H	^?	^?	^?
+	BackSpace	^?	^?	^H	^H
 	Find	ESC [ 1 ~	ESC [ 1 $	ESC [ 1 ^	ESC [ 1 @
 	Insert	ESC [ 2 ~	I<paste>	ESC [ 2 ^	ESC [ 2 @
 	Execute	ESC [ 3 ~	ESC [ 3 $	ESC [ 3 ^	ESC [ 3 @
 	Select	ESC [ 4 ~	ESC [ 4 $	ESC [ 4 ^	ESC [ 4 @
 	Prior	ESC [ 5 ~	I<scroll-up>	ESC [ 5 ^	ESC [ 5 @
 	KP_Enter	^M			ESC O M
 	KP_F1	ESC O P			ESC O P
 	KP_F2	ESC O Q			ESC O Q
 	KP_F3	ESC O R			ESC O R
 	KP_F4	ESC O S			ESC O S
-	XK_KP_Multiply	*			ESC O j
+	KP_Multiply	*			ESC O j
-	XK_KP_Add	+			ESC O k
+	KP_Add	+			ESC O k
-	XK_KP_Separator	,			ESC O l
+	KP_Separator	,			ESC O l
-	XK_KP_Subtract	-			ESC O m
+	KP_Subtract	-			ESC O m
-	XK_KP_Decimal	.			ESC O n
+	KP_Decimal	.			ESC O n
-	XK_KP_Divide	/			ESC O o
+	KP_Divide	/			ESC O o
-	XK_KP_0	0			ESC O p
+	KP_0	0			ESC O p
-	XK_KP_1	1			ESC O q
+	KP_1	1			ESC O q
-	XK_KP_2	2			ESC O r
+	KP_2	2			ESC O r
-	XK_KP_3	3			ESC O s
+	KP_3	3			ESC O s
-	XK_KP_4	4			ESC O t
+	KP_4	4			ESC O t
-	XK_KP_5	5			ESC O u
+	KP_5	5			ESC O u
-	XK_KP_6	6			ESC O v
+	KP_6	6			ESC O v
-	XK_KP_7	7			ESC O w
+	KP_7	7			ESC O w
-	XK_KP_8	8			ESC O x
+	KP_8	8			ESC O x
-	XK_KP_9	9			ESC O y
+	KP_9	9			ESC O y
 =end table
 =head1 CONFIGURE OPTIONS
 General hint: if you get compile errors, then likely your configuration
 hasn't been tested well. Either try with C<--enable-everything> or use
-the F<./reconf> script as a base for experiments. F<./reconf> is used by
+the default configuration (i.e. no C<--enable-xxx> or C<--disable-xxx>
-myself, so it should generally be a working config. Of course, you should
+switches). Of course, you should always report when a combination doesn't
-always report when a combination doesn't work, so it can be fixed. Marc
+work, so it can be fixed. Marc Lehmann <rxvt@schmorp.de>.
-Lehmann <rxvt@schmorp.de>.
 All
 =over 4
 =item --enable-everything
-Add (or remove) support for all non-multichoice options listed in "./configure
+Add (or remove) support for all non-multichoice options listed
---help".
+in C<./configure --help>, except for C<--enable-assert> and
+C<--enable-256-color>.
 You can specify this and then disable options you do not like by
 I<following> this with the appropriate C<--disable-...> arguments,
 or you can start with a minimal configuration by specifying
 C<--disable-everything> and than adding just the C<--enable-...> arguments
 you want.
-=item --enable-xft (default: enabled)
+=item --enable-xft (default: on)
-Add support for Xft (anti-aliases, among others) fonts. Xft fonts are
+Add support for Xft (anti-aliased, among others) fonts. Xft fonts are
 slower and require lots of memory, but as long as you don't use them, you
 don't pay for them.
 =item --enable-font-styles (default: on)
 Add support for B<bold>, I<italic> and B<< I<bold italic> >> font
 styles. The fonts can be set manually or automatically.
-=item --with-codesets=NAME,... (default: all)
+=item --with-codesets=CS,... (default: all)
 Compile in support for additional codeset (encoding) groups (C<eu>, C<vn>
 are always compiled in, which includes most 8-bit character sets). These
 codeset tables are used for driving X11 core fonts, they are not required
 for Xft fonts, although having them compiled in lets rxvt-unicode choose
 =begin table
 	all	all available codeset groups
 	zh	common chinese encodings
-	zh_ext	rarely used but very big chinese encodigs
+	zh_ext	rarely used but very big chinese encodings
 	jp	common japanese encodings
 	jp_ext	rarely used but big japanese encodings
 	kr	korean encodings
 =end table
 Add support for XIM (X Input Method) protocol. This allows using
 alternative input methods (e.g. kinput2) and will also correctly
 set up the input for people using dead keys or compose keys.
 =item --enable-unicode3 (default: off)
+Recommended to stay off unless you really need non-BMP characters.
 Enable direct support for displaying unicode codepoints above
 65535 (the basic multilingual page). This increases storage
 requirements per character from 2 to 4 bytes. X11 fonts do not yet
 support these extra characters, but Xft does.
 Please note that rxvt-unicode can store unicode code points >65535
 even without this flag, but the number of such characters is
-limited to a view thousand (shared with combining characters,
+limited to a few thousand (shared with combining characters,
 see next switch), and right now rxvt-unicode cannot display them
 (input/output and cut&paste still work, though).
 =item --enable-combining (default: on)
 Enable automatic composition of combining characters into
 composite characters. This is required for proper viewing of text
-where accents are encoded as seperate unicode characters. This is
+where accents are encoded as separate unicode characters. This is
-done by using precomposited characters when available or creating
+done by using precomposed characters when available or creating
 new pseudo-characters when no precomposed form exists.
-Without --enable-unicode3, the number of additional precomposed characters
+Without --enable-unicode3, the number of additional precomposed
-is rather limited (2048, if this is full, rxvt-unicode will use the
+characters is somewhat limited (the 6400 private use characters will be
-private use area, extending the number of combinations to 8448). With
---enable-unicode3, no practical limit exists.
+(ab-)used). With --enable-unicode3, no practical limit exists.
 This option will also enable storage (but not display) of characters
 beyond plane 0 (>65535) when --enable-unicode3 was not specified.
 The combining table also contains entries for arabic presentation forms,
 but these are not currently used. Bug me if you want these to be used (and
 tell me how these are to be used...).
-=item --enable-fallback(=CLASS) (default: Rxvt)
+=item --enable-fallback[=CLASS] (default: Rxvt)
-When reading resource settings, also read settings for class CLASS. To disable resource fallback use --disable-fallback.
+When reading resource settings, also read settings for class CLASS. To
+disable resource fallback use --disable-fallback.
 =item --with-res-name=NAME (default: urxvt)
 Use the given name as default application name when
 reading resources. Specify --with-res-name=rxvt to replace rxvt.
-=item --with-res-class=CLASS /default: URxvt)
+=item --with-res-class=CLASS (default: URxvt)
 Use the given class as default application class
 when reading resources. Specify --with-res-class=Rxvt to replace
 rxvt.
 Write user and tty to lastlog file (used by programs like
 F<lastlogin>) at start of rxvt execution.  This option requires
 --enable-utmp to also be specified.
-=item --enable-xpm-background (default: on)
+=item --enable-pixbuf (default: on)
-Add support for XPM background pixmaps.
+Add support for GDK-PixBuf to be used for background images.
+It adds support for many file formats including JPG, PNG,
+TIFF, GIF, XPM, BMP, ICO and TGA.
+=item --enable-startup-notification (default: on)
+Add support for freedesktop startup notifications. This allows window managers
+to display some kind of progress indicator during startup.
 =item --enable-transparency (default: on)
-Add support for inheriting parent backgrounds thus giving a fake
+Add support for using the root pixmap as background to simulate transparency.
-transparency to the term.
+Note that this feature depends on libXrender and on the availability
+of the RENDER extension in the X server.
 =item --enable-fading (default: on)
-Add support for fading the text when focus is lost (requires C<--enable-transparency>).
+Add support for fading the text when focus is lost.
-=item --enable-tinting (default: on)
-Add support for tinting of transparent backgrounds (requires C<--enable-transparency>).
 =item --enable-rxvt-scroll (default: on)
 Add support for the original rxvt scrollbar.
 Add support for a NeXT-like scrollbar.
 =item --enable-xterm-scroll (default: on)
 Add support for an Xterm-like scrollbar.
-=item --enable-plain-scroll (default: on)
-Add support for a very unobtrusive, plain-looking scrollbar that
-is the favourite of the rxvt-unicode author, having used it for
-many years.
-=item --enable-ttygid (default: off)
-Change tty device setting to group "tty" - only use this if
-your system uses this type of security.
 =item --disable-backspace-key
 Removes any handling of the backspace key by us - let the X server do it.
 A non-exhaustive list of features enabled by C<--enable-frills> (possibly
 in combination with other switches) is:
   MWM-hints
   EWMH-hints (pid, utf8 names) and protocols (ping)
+  urgency hint
-  seperate underline colour (-underlineColor)
+  separate underline colour (-underlineColor)
   settable border widths and borderless switch (-w, -b, -bl)
+  visual depth selection (-depth)
-  settable extra linespacing /-lsp)
+  settable extra linespacing (-lsp)
-  iso-14755-2 and -3, and visual feedback
+  iso-14755 5.1 (basic) support
-  backindex and forwardindex escape sequence
-  window op and some xterm/OSC escape sequences
   tripleclickwords (-tcw)
   settable insecure mode (-insecure)
   keysym remapping support
-  cursor blinking and underline cursor (-cb, -uc)
+  cursor blinking and underline cursor (-bc, -uc)
   XEmbed support (-embed)
   user-pty (-pty-fd)
   hold on exit (-hold)
+  compile in built-in block graphics
   skip builtin block graphics (-sbg)
+  separate highlight colour (-highlightColor, -highlightTextColor)
+  focus reporting mode (1004).
+  extended mouse reporting modes (1005 and 1015).
+  visual selection via -visual and -depth.
+It also enables some non-essential features otherwise disabled, such as:
+  some round-trip time optimisations
+  nearest colour allocation on pseudocolor screens
+  UTF8_STRING support for selection
   sgr modes 90..97 and 100..107
+  backindex and forwardindex escape sequences
+  view change/zero scrollback escape sequences
+  locale switching escape sequence
+  window op and some xterm/OSC escape sequences
+  rectangular selections
+  trailing space removal for selections
+  verbose X error handling
 =item --enable-iso14755 (default: on)
-Enable extended ISO 14755 support (see @@RXVT_NAME@@(1), or
+Enable extended ISO 14755 support (see @@RXVT_NAME@@(1)).
-F<doc/rxvt.1.txt>). Basic support (section 5.1) is enabled by
+Basic support (section 5.1) is enabled by C<--enable-frills>, while
-C<--enable-frills>, while support for 5.2, 5.3 and 5.4 is enabled with
+support for 5.2, 5.3 and 5.4 is enabled with this switch.
-this switch.
 =item --enable-keepscrolling (default: on)
 Add support for continual scrolling of the display when you hold
 the mouse button down on a scrollbar arrow.
+=item --enable-selectionscrolling (default: on)
+Add support for scrolling when the selection moves to the top or
+bottom of the screen.
 =item --enable-mousewheel (default: on)
 Add support for scrolling via mouse wheel or buttons 4 & 5.
 Add support for continual scrolling (using the mouse wheel as an
 accelerator) while the control key is held down.  This option
 requires --enable-mousewheel to also be specified.
-=item --disable-new-selection
-Remove support for mouse selection style like that of xterm.
-=item --enable-dmalloc (default: off)
-Use Gray Watson's malloc - which is good for debugging See
-http://www.letters.com/dmalloc/ for details If you use either this or the
-next option, you may need to edit src/Makefile after compiling to point
-DINCLUDE and DLIB to the right places.
-You can only use either this option and the following (should
-you use either) .
-=item --enable-dlmalloc (default: off)
-Use Doug Lea's malloc - which is good for a production version
-See L<http://g.oswego.edu/dl/html/malloc.html> for details.
-=item --enable-smart-resize (default: on)
+=item --enable-smart-resize (default: off)
-Add smart growth/shrink behaviour when changing font size via hot
+Add smart growth/shrink behaviour when resizing.
-keys. This should keep the window corner which is closest to a corner of
+This should keep the window corner which is closest to a corner of
 the screen in a fixed position.
+=item --enable-text-blink (default: on)
+Add support for blinking text.
 =item --enable-pointer-blank (default: on)
 Add support to have the pointer disappear when typing or inactive.
-=item --enable-perl (default: off)
+=item --enable-perl (default: on)
 Enable an embedded perl interpreter. See the B<@@RXVT_NAME@@perl(3)>
-manpage (F<doc/rxvtperl.txt>) for more info on this feature, or the files
+manpage for more info on this feature, or the files in F<src/perl/>
-in F<src/perl-ext/> for the extensions that are installed by default. The
+for the extensions that are installed by default.
-perl interpreter that is used can be specified via the C<PERL> environment
+The perl interpreter that is used can be specified via the C<PERL>
-variable when running configure.
+environment variable when running configure. Even when compiled in,
+perl will I<not> be initialised when all extensions have been disabled
+C<-pe "" --perl-ext-common "">, so it should be safe to enable from a
+resource standpoint.
+=item --enable-assert (default: off)
+Enables the assertions in the code, normally disabled. This switch is only
+useful when developing rxvt-unicode.
+=item --enable-256-color (default: off)
+Force use of so-called 256 colour mode, to work around buggy applications
+that do not support termcap/terminfo, or simply improve support for
+applications hardcoding the xterm 256 colour table.
+This switch breaks termcap/terminfo compatibility to C<TERM=rxvt-unicode>,
+and consequently sets C<TERM> to C<rxvt-unicode-256color> by default
+(F<doc/etc/> contains termcap/terminfo definitions for both).
+It also results in higher memory usage and can slow down @@RXVT_NAME@@
+dramatically when more than six fonts are in use by a terminal instance.
 =item --with-name=NAME (default: urxvt)
 Set the basename for the installed binaries, resulting
 in C<urxvt>, C<urxvtd> etc.). Specify C<--with-name=rxvt> to replace with
 PATH.
 =item --with-x
 Use the X Window System (pretty much default, eh?).
-=item --with-xpm-includes=DIR
-Look for the XPM includes in DIR.
-=item --with-xpm-library=DIR
-Look for the XPM library in DIR.
-=item --with-xpm
-Not needed - define via --enable-xpm-background.
 =back
 =head1 AUTHORS

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/doc/rxvt.7.pod (file contents): Revision 1.89 by root, Wed Jan 18 21:00:39 2006 UTC vs. Revision 1.242 by sf-exg, Sat May 14 08:31:26 2016 UTC

Diff Legend

Comparing rxvt-unicode/doc/rxvt.7.pod (file contents):
Revision 1.89 by root, Wed Jan 18 21:00:39 2006 UTC vs.
Revision 1.242 by sf-exg, Sat May 14 08:31:26 2016 UTC