1 | NAME |
1 | NAME |
2 | RXVT REFERENCE - FAQ, command sequences and other background information |
2 | RXVT REFERENCE - FAQ, command sequences and other background information |
|
|
3 | |
|
|
4 | SYNOPSIS |
|
|
5 | # set a new font set |
|
|
6 | printf '\33]50;%s\007' 9x15,xft:Kochi" Mincho" |
|
|
7 | |
|
|
8 | # change the locale and tell rxvt-unicode about it |
|
|
9 | export LC_CTYPE=ja_JP.EUC-JP; printf "\33]701;$LC_CTYPE\007" |
|
|
10 | |
|
|
11 | # set window title |
|
|
12 | printf '\33]2;%s\007' "new window title" |
|
|
13 | |
|
|
14 | DESCRIPTION |
|
|
15 | This document contains the FAQ, the RXVT TECHNICAL REFERENCE documenting |
|
|
16 | all escape sequences, and other background information. |
|
|
17 | |
|
|
18 | The newest version of this document is also available on the World Wide |
|
|
19 | Web at |
|
|
20 | <http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>. |
3 | |
21 | |
4 | FREQUENTLY ASKED QUESTIONS |
22 | FREQUENTLY ASKED QUESTIONS |
5 | How do I know which rxvt-unicode version I'm using? |
23 | How do I know which rxvt-unicode version I'm using? |
6 | The version number is displayed with the usage (-h). Also the escape |
24 | The version number is displayed with the usage (-h). Also the escape |
7 | sequence "ESC[8n" sets the window title to the version number. |
25 | sequence "ESC [ 8 n" sets the window title to the version number. |
|
|
26 | |
|
|
27 | I am using Debian GNU/Linux and have a problem... |
|
|
28 | The Debian GNU/Linux package of rxvt-unicode in sarge contains large |
|
|
29 | patches that considerably change the behaviour of rxvt-unicode. |
|
|
30 | Before reporting a bug to the original rxvt-unicode author please |
|
|
31 | download and install the genuine version |
|
|
32 | (<http://software.schmorp.de#rxvt-unicode>) and try to reproduce the |
|
|
33 | problem. If you cannot, chances are that the problems are specific |
|
|
34 | to Debian GNU/Linux, in which case it should be reported via the |
|
|
35 | Debian Bug Tracking System (use "reportbug" to report the bug). |
|
|
36 | |
|
|
37 | For other problems that also affect the Debian package, you can and |
|
|
38 | probably should use the Debian BTS, too, because, after all, it's |
|
|
39 | also a bug in the Debian version and it serves as a reminder for |
|
|
40 | other users that might encounter the same issue. |
8 | |
41 | |
9 | When I log-in to another system it tells me about missing terminfo data? |
42 | When I log-in to another system it tells me about missing terminfo data? |
10 | The terminal description used by rxvt-unicode is not as widely |
43 | The terminal description used by rxvt-unicode is not as widely |
11 | available as that for xterm, or even rxvt (for which the same |
44 | available as that for xterm, or even rxvt (for which the same |
12 | problem often arises). |
45 | problem often arises). |
… | |
… | |
24 | problems arising, which includes wrong keymapping, less and |
57 | problems arising, which includes wrong keymapping, less and |
25 | different colours and some refresh errors in fullscreen |
58 | different colours and some refresh errors in fullscreen |
26 | applications. It's a nice quick-and-dirty workaround for rare cases, |
59 | applications. It's a nice quick-and-dirty workaround for rare cases, |
27 | though. |
60 | though. |
28 | |
61 | |
29 | If you always want to do this you can either recompile rxvt-unicode |
62 | If you always want to do this (and are fine with the consequences) |
30 | with the desired TERM value or use a resource to set it: |
63 | you can either recompile rxvt-unicode with the desired TERM value or |
|
|
64 | use a resource to set it: |
31 | |
65 | |
32 | URxvt.termName: rxvt |
66 | URxvt.termName: rxvt |
33 | |
67 | |
34 | If you don't plan to use rxvt (quite common...) you could also |
68 | If you don't plan to use rxvt (quite common...) you could also |
35 | replace the rxvt terminfo file with the rxvt-unicode one. |
69 | replace the rxvt terminfo file with the rxvt-unicode one. |
36 | |
70 | |
|
|
71 | "tic" outputs some error when compiling the terminfo entry. |
|
|
72 | Most likely it's the empty definition for "enacs=". Just replace it |
|
|
73 | by "enacs=\E[0@" and try again. |
|
|
74 | |
|
|
75 | "bash"'s readline does not work correctly under rxvt. |
37 | I need a termcap file entry. |
76 | I need a termcap file entry. |
|
|
77 | One reason you might want this is that some distributions or |
|
|
78 | operating systems still compile some programs using the |
|
|
79 | long-obsoleted termcap library (Fedora Core's bash is one example) |
|
|
80 | and rely on a termcap entry for "rxvt-unicode". |
|
|
81 | |
38 | You could use rxvt's termcap entry with resonable results in many |
82 | You could use rxvt's termcap entry with resonable results in many |
39 | cases. You can also create a termcap entry by using terminfo's |
83 | cases. You can also create a termcap entry by using terminfo's |
40 | infocmp program like this: |
84 | infocmp program like this: |
41 | |
85 | |
42 | infocmp -C rxvt-unicode |
86 | infocmp -C rxvt-unicode |
43 | |
87 | |
44 | OR you could this termcap entry: |
88 | Or you could use this termcap entry, generated by the command above: |
45 | |
89 | |
46 | rxvt-unicode|rxvt-unicode terminal (X Window System):\ |
90 | rxvt-unicode|rxvt-unicode terminal (X Window System):\ |
47 | :am:bw:eo:km:mi:ms:xn:xo:\ |
91 | :am:bw:eo:km:mi:ms:xn:xo:\ |
48 | :co#80:it#8:li#24:\ |
92 | :co#80:it#8:li#24:lm#0:\ |
49 | :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ |
93 | :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ |
50 | :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\ |
94 | :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\ |
51 | :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:al=\E[L:\ |
95 | :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=\E(B:al=\E[L:\ |
52 | :as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\ |
96 | :as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\ |
53 | :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\ |
97 | :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\ |
54 | :ec=\E[%dX:ei=\E[4l:ho=\E[H:i1=\E[?47l\E=\E[?1l:ic=\E[@:\ |
98 | :dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:\ |
|
|
99 | :i1=\E[?47l\E=\E[?1l:ic=\E[@:im=\E[4h:\ |
55 | :im=\E[4h:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\ |
100 | :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\ |
56 | :k0=\E[21~:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\ |
101 | :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\ |
57 | :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\ |
102 | :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\ |
58 | :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:\ |
103 | :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\ |
59 | :ke=\E[?1l\E>:kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\ |
104 | :kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\ |
60 | :ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:\ |
105 | :mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:rc=\E8:\ |
61 | :nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:\ |
106 | :sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ |
62 | :st=\EH:ta=^I:te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:\ |
107 | :te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:\ |
63 | :up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\ |
108 | :us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\ |
64 | :vs=\E[?25h: |
109 | :vs=\E[?25h: |
65 | |
110 | |
66 | Why does "ls" no longer have coloured output? |
111 | Why does "ls" no longer have coloured output? |
67 | The "ls" in the GNU coreutils unfortunately doesn't use terminfo to |
112 | The "ls" in the GNU coreutils unfortunately doesn't use terminfo to |
68 | decide wether a terminal has colour, but uses it's own configuration |
113 | decide wether a terminal has colour, but uses it's own configuration |
… | |
… | |
87 | furthermore fail to even install the "rxvt-unicode" terminfo file, |
132 | furthermore fail to even install the "rxvt-unicode" terminfo file, |
88 | so you will need to install it on your own (See the question When I |
133 | so you will need to install it on your own (See the question When I |
89 | log-in to another system it tells me about missing terminfo data? on |
134 | log-in to another system it tells me about missing terminfo data? on |
90 | how to do this). |
135 | how to do this). |
91 | |
136 | |
|
|
137 | My numerical keypad acts weird and generates differing output? |
|
|
138 | Some Debian GNUL/Linux users seem to have this problem, although no |
|
|
139 | specific details were reported so far. It is possible that this is |
|
|
140 | caused by the wrong "TERM" setting, although the details of wether |
|
|
141 | and how this can happen are unknown, as "TERM=rxvt" should offer a |
|
|
142 | compatible keymap. See the answer to the previous question, and |
|
|
143 | please report if that helped. |
|
|
144 | |
92 | Rxvt-unicode does not seem to understand the selected encoding? |
145 | Rxvt-unicode does not seem to understand the selected encoding? |
93 | Unicode does not seem to work? |
146 | Unicode does not seem to work? |
94 | If you encounter strange problems like typing an accented character |
147 | If you encounter strange problems like typing an accented character |
95 | but getting two unrelated other characters or similar, or if program |
148 | but getting two unrelated other characters or similar, or if program |
96 | output is subtly garbled, then you should check your locale |
149 | output is subtly garbled, then you should check your locale |
97 | settings. |
150 | settings. |
98 | |
151 | |
99 | Rxvt-unicode must be started with the same "LC_CTYPE" setting as the |
152 | Rxvt-unicode must be started with the same "LC_CTYPE" setting as the |
100 | programs. Often rxvt-unicode is started in the "C" locale, while the |
153 | programs. Often rxvt-unicode is started in the "C" locale, while the |
101 | login script running within the rxvt-unicode window changes the |
154 | login script running within the rxvt-unicode window changes the |
102 | locale to sth. else, e.h. "en_GB.UTF-8". Needless to say, this is |
155 | locale to something else, e.g. "en_GB.UTF-8". Needless to say, this |
103 | not going to work. |
156 | is not going to work. |
104 | |
157 | |
105 | The best thing is to fix your startup environment, as you will |
158 | The best thing is to fix your startup environment, as you will |
106 | likely run into other problems. If nothing works you can try this in |
159 | likely run into other problems. If nothing works you can try this in |
107 | your .profile. |
160 | your .profile. |
108 | |
161 | |
109 | printf '\e]701;%s\007' "$LC_CTYPE" |
162 | printf '\e]701;%s\007' "$LC_CTYPE" |
110 | |
163 | |
111 | If this doesn't work, then maybe you use a "LC_CTYPE" specification |
164 | If this doesn't work, then maybe you use a "LC_CTYPE" specification |
112 | not supported on your systems. Some systems have a "locale" command |
165 | not supported on your systems. Some systems have a "locale" command |
113 | which displays this. If it displays sth. like: |
166 | which displays this (also, "perl -e0" can be used to check locale |
|
|
167 | settings, as it will complain loudly if it cannot set the locale). |
|
|
168 | If it displays something like: |
114 | |
169 | |
115 | locale: Cannot set LC_CTYPE to default locale: ... |
170 | locale: Cannot set LC_CTYPE to default locale: ... |
116 | |
171 | |
117 | Then the locale you specified is not supported on your system. |
172 | Then the locale you specified is not supported on your system. |
118 | |
173 | |
… | |
… | |
126 | Chances are that the font you (or the admin/package maintainer of |
181 | Chances are that the font you (or the admin/package maintainer of |
127 | your system/os) have specified does not cover all the characters you |
182 | your system/os) have specified does not cover all the characters you |
128 | want to display. |
183 | want to display. |
129 | |
184 | |
130 | rxvt-unicode makes a best-effort try at finding a replacement font. |
185 | rxvt-unicode makes a best-effort try at finding a replacement font. |
131 | Often the result is fine, but sometimes the chosen font looks bad. |
186 | Often the result is fine, but sometimes the chosen font looks |
132 | Many fonts have totally strange characters that don't resemble the |
187 | bad/ugly/wrong. Some fonts have totally strange characters that |
133 | correct glyph at all, and rxvt-unicode lacks the artificial |
188 | don't resemble the correct glyph at all, and rxvt-unicode lacks the |
134 | intelligence to detect that a specific glyph is wrong: it has to |
189 | artificial intelligence to detect that a specific glyph is wrong: it |
135 | believe the font that the characters it contains indeed look |
190 | has to believe the font that the characters it claims to contain |
136 | correct. |
191 | indeed look correct. |
137 | |
192 | |
138 | In that case, select a font of your taste and add it to the font |
193 | In that case, select a font of your taste and add it to the font |
139 | list, e.g.: |
194 | list, e.g.: |
140 | |
195 | |
141 | rxvt -fn basefont,font2,font3... |
196 | rxvt -fn basefont,font2,font3... |
… | |
… | |
144 | font. If the base font does not contain the character, it will go to |
199 | font. If the base font does not contain the character, it will go to |
145 | the next font, and so on. Specifying your own fonts will also speed |
200 | the next font, and so on. Specifying your own fonts will also speed |
146 | up this search and use less resources within rxvt-unicode and the |
201 | up this search and use less resources within rxvt-unicode and the |
147 | X-server. |
202 | X-server. |
148 | |
203 | |
149 | The only limitation is that all the fonts must not be larger than |
204 | The only limitation is that none of the fonts may be larger than the |
150 | the base font, as the base font defines the principal cell size, |
205 | base font, as the base font defines the terminal character cell |
151 | which must be the same due to the way terminals work. |
206 | size, which must be the same due to the way terminals work. |
152 | |
207 | |
153 | Why do some chinese characters look so different than others? |
208 | Why do some chinese characters look so different than others? |
154 | This is because there is a difference between script and language -- |
209 | This is because there is a difference between script and language -- |
155 | rxvt-unicode does not know which language the text that is output |
210 | rxvt-unicode does not know which language the text that is output |
156 | is, as it only knows the unicode character codes. If rxvt-unicode |
211 | is, as it only knows the unicode character codes. If rxvt-unicode |
157 | first sees a japanese character, it might choose a japanese font for |
212 | first sees a japanese/chinese character, it might choose a japanese |
158 | it. Subsequent japanese characters will take that font. Now, many |
213 | font for display. Subsequent japanese characters will use that font. |
159 | chinese characters aren't represented in japanese fonts, so when the |
214 | Now, many chinese characters aren't represented in japanese fonts, |
160 | first non-japanese character comes up, rxvt-unicode will look for a |
215 | so when the first non-japanese character comes up, rxvt-unicode will |
161 | chinese font -- unfortunately at this point, it will still use the |
216 | look for a chinese font -- unfortunately at this point, it will |
162 | japanese font for japanese characters that are also chinese. |
217 | still use the japanese font for chinese characters that are also in |
|
|
218 | the japanese font. |
163 | |
219 | |
164 | The workaround is easy: just tag a chinese font at the end of your |
220 | The workaround is easy: just tag a chinese font at the end of your |
165 | font list (see the previous question). The key is to view the font |
221 | font list (see the previous question). The key is to view the font |
166 | list as a preference list: If you expect more japanese, list a |
222 | list as a preference list: If you expect more japanese, list a |
167 | japanese font first. If you expect more chinese, put a chinese font |
223 | japanese font first. If you expect more chinese, put a chinese font |
168 | first. |
224 | first. |
169 | |
225 | |
170 | In the future it might be possible to switch preferences at runtime |
226 | In the future it might be possible to switch language preferences at |
171 | (the internal data structure has no problem with using different |
227 | runtime (the internal data structure has no problem with using |
172 | fonts for the same character at the same time, but no interface for |
228 | different fonts for the same character at the same time, but no |
173 | this has been designed yet). |
229 | interface for this has been designed yet). |
|
|
230 | |
|
|
231 | Until then, you might get away with switching fonts at runtime (see |
|
|
232 | "Can I switch the fonts at runtime?" later in this document). |
174 | |
233 | |
175 | Why does rxvt-unicode sometimes leave pixel droppings? |
234 | Why does rxvt-unicode sometimes leave pixel droppings? |
176 | Most fonts were not designed for terminal use, which means that |
235 | Most fonts were not designed for terminal use, which means that |
177 | character size varies a lot. A font that is otherwise fine for |
236 | character size varies a lot. A font that is otherwise fine for |
178 | terminal use might contain some characters that are simply too wide. |
237 | terminal use might contain some characters that are simply too wide. |
… | |
… | |
192 | that doesn't work, you might be forced to use a different font. |
251 | that doesn't work, you might be forced to use a different font. |
193 | |
252 | |
194 | All of this is not a problem when using X11 core fonts, as their |
253 | All of this is not a problem when using X11 core fonts, as their |
195 | bounding box data is correct. |
254 | bounding box data is correct. |
196 | |
255 | |
|
|
256 | On Solaris 9, many line-drawing characters are too wide. |
|
|
257 | Seems to be a known bug, read |
|
|
258 | <http://nixdoc.net/files/forum/about34198.html>. Some people use the |
|
|
259 | following ugly workaround to get non-double-wide-characters working: |
|
|
260 | |
|
|
261 | #define wcwidth(x) wcwidth(x) > 1 ? 1 : wcwidth(x) |
|
|
262 | |
197 | My Compose (Multi_key) key is no longer working. |
263 | My Compose (Multi_key) key is no longer working. |
198 | The most common causes for this are that either your locale is not |
264 | The most common causes for this are that either your locale is not |
199 | set correctly, or you specified a preeditStyle that is not supported |
265 | set correctly, or you specified a preeditStyle that is not supported |
200 | by your input method. For example, if you specified OverTheSpot and |
266 | by your input method. For example, if you specified OverTheSpot and |
201 | your input method (e.g. the default input method handling Compose |
267 | your input method (e.g. the default input method handling Compose |
… | |
… | |
212 | advantage, typing <Ctrl-Shift-0> to get a ASCII NUL. This works for |
278 | advantage, typing <Ctrl-Shift-0> to get a ASCII NUL. This works for |
213 | other codes, too, such as "Ctrl-Shift-1-d" to type the default |
279 | other codes, too, such as "Ctrl-Shift-1-d" to type the default |
214 | telnet escape character and so on. |
280 | telnet escape character and so on. |
215 | |
281 | |
216 | How can I keep rxvt-unicode from using reverse video so much? |
282 | How can I keep rxvt-unicode from using reverse video so much? |
217 | First of all, make sure you are running with the right terminfo |
283 | First of all, make sure you are running with the right terminal |
218 | ("urxvt"), which will get rid of most of these effects. Then make |
284 | settings ("TERM=rxvt-unicode"), which will get rid of most of these |
219 | sure you have specified colours for italic and bold, as otherwise |
285 | effects. Then make sure you have specified colours for italic and |
220 | rxvt-unicode might use reverse video to simulate the effect: |
286 | bold, as otherwise rxvt-unicode might use reverse video to simulate |
|
|
287 | the effect: |
221 | |
288 | |
222 | URxvt*colorBD: white |
289 | URxvt.colorBD: white |
223 | URxvt*colorIT: green |
290 | URxvt.colorIT: green |
224 | |
291 | |
225 | Some programs assume totally weird colours (red instead of blue), how |
292 | Some programs assume totally weird colours (red instead of blue), how |
226 | can I fix that? |
293 | can I fix that? |
227 | For some unexplainable reason, some programs (i.e. irssi) assume a |
294 | For some unexplainable reason, some rare programs assume a very |
228 | very weird colour palette when confronted with a terminal with more |
295 | weird colour palette when confronted with a terminal with more than |
229 | than the standard 8 colours (rxvt-unicode supports 88). The right |
296 | the standard 8 colours (rxvt-unicode supports 88). The right fix is, |
230 | fix is, of course, to fix these programs not to assume non-ISO |
297 | of course, to fix these programs not to assume non-ISO colours |
231 | colours without very good reasons. |
298 | without very good reasons. |
232 | |
299 | |
233 | In the meantime, you can either edit your "urxvt" terminfo |
300 | In the meantime, you can either edit your "rxvt-unicode" terminfo |
234 | definition to only claim 8 colour support or use "TERM=rxvt", which |
301 | definition to only claim 8 colour support or use "TERM=rxvt", which |
235 | will fix colours but keep you from using other rxvt-unicode |
302 | will fix colours but keep you from using other rxvt-unicode |
236 | features. |
303 | features. |
237 | |
304 | |
238 | I am on FreeBSD and rxvt-unicode does not seem to work at all. |
305 | I am on FreeBSD and rxvt-unicode does not seem to work at all. |
… | |
… | |
241 | it, wether it defines the symbol or not. "__STDC_ISO_10646__" |
308 | it, wether it defines the symbol or not. "__STDC_ISO_10646__" |
242 | requires that wchar_t is represented as unicode. |
309 | requires that wchar_t is represented as unicode. |
243 | |
310 | |
244 | As you might have guessed, FreeBSD does neither define this symobl |
311 | As you might have guessed, FreeBSD does neither define this symobl |
245 | nor does it support it. Instead, it uses it's own internal |
312 | nor does it support it. Instead, it uses it's own internal |
246 | representation of wchar_t. This is, of course, completely legal. |
313 | representation of wchar_t. This is, of course, completely fine with |
|
|
314 | respect to standards. |
247 | |
315 | |
|
|
316 | However, that means rxvt-unicode only works in "POSIX", "ISO-8859-1" |
|
|
317 | and "UTF-8" locales under FreeBSD (which all use Unicode as wchar_t. |
|
|
318 | |
248 | However, "__STDC_ISO_10646__" is the only sane way to support |
319 | "__STDC_ISO_10646__" is the only sane way to support multi-language |
249 | multi-language apps in an OS, as using a locale-dependent (and |
320 | apps in an OS, as using a locale-dependent (and non-standardized) |
250 | non-standardized) representation of wchar_t makes it impossible to |
321 | representation of wchar_t makes it impossible to convert between |
251 | convert between wchar_t (as used by X11 and your applications) and |
322 | wchar_t (as used by X11 and your applications) and any other |
252 | any other encoding without implementing OS-specific-wrappers for |
323 | encoding without implementing OS-specific-wrappers for each and |
253 | each and every locale. There simply are no APIs to convert wchar_t |
324 | every locale. There simply are no APIs to convert wchar_t into |
254 | into anything except the current locale encoding. |
325 | anything except the current locale encoding. |
255 | |
326 | |
256 | Some applications (such as the formidable mlterm) work around this |
327 | Some applications (such as the formidable mlterm) work around this |
257 | by carrying their own replacement functions for character set |
328 | by carrying their own replacement functions for character set |
258 | handling with them, and either implementing OS-dependent hacks or |
329 | handling with them, and either implementing OS-dependent hacks or |
259 | doing multiple conversions (which is slow and unreliable in case the |
330 | doing multiple conversions (which is slow and unreliable in case the |
260 | OS implements encodings slightly different than the terminal |
331 | OS implements encodings slightly different than the terminal |
261 | emulator). |
332 | emulator). |
262 | |
333 | |
263 | The rxvt-unicode author insists that the right way to fix this is in |
334 | The rxvt-unicode author insists that the right way to fix this is in |
264 | the system libraries once and for all, instead of forcing every app |
335 | the system libraries once and for all, instead of forcing every app |
265 | to carry complete replacements. |
336 | to carry complete replacements for them :) |
|
|
337 | |
|
|
338 | I use Solaris 9 and it doesn't compile/work/etc. |
|
|
339 | Try the diff in doc/solaris9.patch as a base. It fixes the worst |
|
|
340 | problems with "wcwidth" and a compile problem. |
|
|
341 | |
|
|
342 | How can I use rxvt-unicode under cygwin? |
|
|
343 | rxvt-unicode should compile and run out of the box on cygwin, using |
|
|
344 | the X11 libraries that come with cygwin. libW11 emulation is no |
|
|
345 | longer supported (and makes no sense, either, as it only supported a |
|
|
346 | single font). I recommend starting the X-server in "-multiwindow" or |
|
|
347 | "-rootless" mode instead, which will result in similar look&feel as |
|
|
348 | the old libW11 emulation. |
|
|
349 | |
|
|
350 | At the time of this writing, cygwin didn't seem to support any |
|
|
351 | multi-byte encodings (you might try "LC_CTYPE=C-UTF-8"), so you are |
|
|
352 | likely limited to 8-bit encodings. |
266 | |
353 | |
267 | How does rxvt-unicode determine the encoding to use? |
354 | How does rxvt-unicode determine the encoding to use? |
268 | Is there an option to switch encodings? |
355 | Is there an option to switch encodings? |
269 | Unlike some other terminals, rxvt-unicode has no encoding switch, |
356 | Unlike some other terminals, rxvt-unicode has no encoding switch, |
270 | and no specific "utf-8" mode, such as xterm. In fact, it doesn't |
357 | and no specific "utf-8" mode, such as xterm. In fact, it doesn't |
… | |
… | |
273 | |
360 | |
274 | The reasons is that there exists a perfectly fine mechanism for |
361 | The reasons is that there exists a perfectly fine mechanism for |
275 | selecting the encoding, doing I/O and (most important) communicating |
362 | selecting the encoding, doing I/O and (most important) communicating |
276 | this to all applications so everybody agrees on character properties |
363 | this to all applications so everybody agrees on character properties |
277 | such as width and code number. This mechanism is the *locale*. |
364 | such as width and code number. This mechanism is the *locale*. |
|
|
365 | Applications not using that info will have problems (for example, |
|
|
366 | "xterm" gets the width of characters wrong as it uses it's own, |
|
|
367 | locale-independent table under all locales). |
278 | |
368 | |
279 | Rxvt-unicode uses the "LC_CTYPE" locale category to select encoding. |
369 | Rxvt-unicode uses the "LC_CTYPE" locale category to select encoding. |
280 | All programs doing the same (that is, most) will automatically agree |
370 | All programs doing the same (that is, most) will automatically agree |
281 | in the interpretation of characters. |
371 | in the interpretation of characters. |
282 | |
372 | |
… | |
… | |
290 | "language_country.encoding", but other forms (i.e. "de" or "german") |
380 | "language_country.encoding", but other forms (i.e. "de" or "german") |
291 | are also common. |
381 | are also common. |
292 | |
382 | |
293 | Rxvt-unicode ignores all other locale categories, and except for the |
383 | Rxvt-unicode ignores all other locale categories, and except for the |
294 | encoding, ignores country or language-specific settings, i.e. |
384 | encoding, ignores country or language-specific settings, i.e. |
295 | "de_DE.UTF-8" and "ja_JP.UTF-8" are the same for rxvt-unicode. |
385 | "de_DE.UTF-8" and "ja_JP.UTF-8" are the normally same to |
|
|
386 | rxvt-unicode. |
296 | |
387 | |
297 | If you want to use a specific encoding you have to make sure you |
388 | If you want to use a specific encoding you have to make sure you |
298 | start rxvt-unicode with the correct "LC_CTYPE" category. |
389 | start rxvt-unicode with the correct "LC_CTYPE" category. |
299 | |
390 | |
300 | Can I switch locales at runtime? |
391 | Can I switch locales at runtime? |
301 | Yes, using an escape sequence. Try sth. like this, which sets |
392 | Yes, using an escape sequence. Try something like this, which sets |
302 | rxvt-unicode's idea of "LC_CTYPE". |
393 | rxvt-unicode's idea of "LC_CTYPE". |
303 | |
394 | |
304 | printf '\e]701;%s\007' ja_JP.SJIS |
395 | printf '\e]701;%s\007' ja_JP.SJIS |
305 | |
396 | |
306 | See also the previous question. |
397 | See also the previous answer. |
307 | |
398 | |
308 | Sometimes this capability is rather handy when you want to work in |
399 | Sometimes this capability is rather handy when you want to work in |
309 | one locale (e.g. "de_DE.UTF-8") but some programs don't support |
400 | one locale (e.g. "de_DE.UTF-8") but some programs don't support it |
310 | UTF-8. For example, I use this script to start "xjdic", which first |
401 | (e.g. UTF-8). For example, I use this script to start "xjdic", which |
311 | switches to a locale supported by xjdic and back later: |
402 | first switches to a locale supported by xjdic and back later: |
312 | |
403 | |
313 | printf '\e]701;%s\007' ja_JP.SJIS |
404 | printf '\e]701;%s\007' ja_JP.SJIS |
314 | xjdic -js |
405 | xjdic -js |
315 | printf '\e]701;%s\007' de_DE.UTF-8 |
406 | printf '\e]701;%s\007' de_DE.UTF-8 |
316 | |
407 | |
|
|
408 | You can also use xterm's "luit" program, which usually works fine, |
|
|
409 | except for some locales where character width differs between |
|
|
410 | program- and rxvt-unicode-locales. |
|
|
411 | |
317 | Can I switch the fonts at runtime? |
412 | Can I switch the fonts at runtime? |
318 | Yes, using an escape sequence. Try sth. like this, which has the |
413 | Yes, using an escape sequence. Try something like this, which has |
319 | same effect as using the "-fn" switch, and takes effect immediately: |
414 | the same effect as using the "-fn" switch, and takes effect |
|
|
415 | immediately: |
320 | |
416 | |
321 | printf '\e]50;%s\007' "9x15bold,xft:Kochi Gothic" |
417 | printf '\e]50;%s\007' "9x15bold,xft:Kochi Gothic" |
322 | |
418 | |
323 | This is useful if you e.g. work primarily with japanese (and prefer |
419 | This is useful if you e.g. work primarily with japanese (and prefer |
324 | a japanese font), but you have to switch to chinese temporarily, |
420 | a japanese font), but you have to switch to chinese temporarily, |
… | |
… | |
327 | You can think of this as a kind of manual ISO-2022 switching. |
423 | You can think of this as a kind of manual ISO-2022 switching. |
328 | |
424 | |
329 | Why do italic characters look as if clipped? |
425 | Why do italic characters look as if clipped? |
330 | Many fonts have difficulties with italic characters and hinting. For |
426 | Many fonts have difficulties with italic characters and hinting. For |
331 | example, the otherwise very nicely hinted font "xft:Bitstream Vera |
427 | example, the otherwise very nicely hinted font "xft:Bitstream Vera |
332 | Sans Mono" completely fails in it's italic face. A workaround is to |
428 | Sans Mono" completely fails in it's italic face. A workaround might |
333 | enable freetype autohinting, i.e. like this: |
429 | be to enable freetype autohinting, i.e. like this: |
334 | |
430 | |
335 | URxvt*italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true |
431 | URxvt.italicFont: xft:Bitstream Vera Sans Mono:italic:autohint=true |
336 | URxvt*boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true |
432 | URxvt.boldItalicFont: xft:Bitstream Vera Sans Mono:bold:italic:autohint=true |
337 | |
433 | |
338 | My input method wants <some encoding> but I want UTF-8, what can I do? |
434 | My input method wants <some encoding> but I want UTF-8, what can I do? |
339 | You can specify separate locales for the input method and the rest |
435 | You can specify separate locales for the input method and the rest |
340 | of the terminal, using the resource "imlocale": |
436 | of the terminal, using the resource "imlocale": |
341 | |
437 | |
… | |
… | |
344 | Now you can start your terminal with "LC_CTYPE=ja_JP.UTF-8" and |
440 | Now you can start your terminal with "LC_CTYPE=ja_JP.UTF-8" and |
345 | still use your input method. Please note, however, that you will not |
441 | still use your input method. Please note, however, that you will not |
346 | be able to input characters outside "EUC-JP" in a normal way then, |
442 | be able to input characters outside "EUC-JP" in a normal way then, |
347 | as your input method limits you. |
443 | as your input method limits you. |
348 | |
444 | |
|
|
445 | Rxvt-unicode crashes when the X Input Method changes or exits. |
|
|
446 | Unfortunately, this is unavoidable, as the XIM protocol is racy by |
|
|
447 | design. Applications can avoid some crashes at the expense of memory |
|
|
448 | leaks, and Input Methods can avoid some crashes by careful ordering |
|
|
449 | at exit time. kinput2 (and derived input methods) generally |
|
|
450 | succeeds, while SCIM (or similar input methods) fails. In the end, |
|
|
451 | however, crashes cannot be completely avoided even if both sides |
|
|
452 | cooperate. |
|
|
453 | |
|
|
454 | So the only workaround is not to kill your Input Method Servers. |
|
|
455 | |
349 | Rxvt-unicode uses gobs of memory, how can I reduce that? |
456 | Rxvt-unicode uses gobs of memory, how can I reduce that? |
350 | Rxvt-unicode tries to obey the rule of not charging you for sth. you |
457 | Rxvt-unicode tries to obey the rule of not charging you for |
351 | don't use. One thing you should try is to configure out all settings |
458 | something you don't use. One thing you should try is to configure |
352 | that you don't need, for example, Xft support is a resource hog by |
459 | out all settings that you don't need, for example, Xft support is a |
353 | design, when used. Compiling it out ensures that no Xft font will be |
460 | resource hog by design, when used. Compiling it out ensures that no |
354 | loaded accidentally when rxvt-unicode tries to find a font for your |
461 | Xft font will be loaded accidentally when rxvt-unicode tries to find |
355 | characters. |
462 | a font for your characters. |
356 | |
463 | |
357 | Also, many people (me included) like large windows and even larger |
464 | Also, many people (me included) like large windows and even larger |
358 | scrollback buffers: Without "--enable-unicode3", rxvt-unicode will |
465 | scrollback buffers: Without "--enable-unicode3", rxvt-unicode will |
359 | use 6 bytes per screen cell. For a 160x?? window this amounts to |
466 | use 6 bytes per screen cell. For a 160x?? window this amounts to |
360 | almost a kilobyte per line. A scrollback buffer of 10000 lines will |
467 | almost a kilobyte per line. A scrollback buffer of 10000 lines will |
… | |
… | |
362 | it gets worse, as rxvt-unicode then uses 8 bytes per screen cell. |
469 | it gets worse, as rxvt-unicode then uses 8 bytes per screen cell. |
363 | |
470 | |
364 | Can I speed up Xft rendering somehow? |
471 | Can I speed up Xft rendering somehow? |
365 | Yes, the most obvious way to speed it up is to avoid Xft entirely, |
472 | Yes, the most obvious way to speed it up is to avoid Xft entirely, |
366 | as it is simply slow. If you still want Xft fonts you might try to |
473 | as it is simply slow. If you still want Xft fonts you might try to |
367 | disable antialiasing (by appending ":antialiasing=false"), which |
474 | disable antialiasing (by appending ":antialias=false"), which saves |
368 | saves lots of memory and also speeds up rendering considerably. |
475 | lots of memory and also speeds up rendering considerably. |
369 | |
476 | |
370 | Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong? |
477 | Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong? |
371 | Rxvt-unicode will use whatever you specify as a font. If it needs to |
478 | Rxvt-unicode will use whatever you specify as a font. If it needs to |
372 | fall back to it's default font search list it will prefer X11 core |
479 | fall back to it's default font search list it will prefer X11 core |
373 | fonts, because they are small and fast, and then use Xft fonts. It |
480 | fonts, because they are small and fast, and then use Xft fonts. It |
… | |
… | |
404 | resources (or as long-options). |
511 | resources (or as long-options). |
405 | |
512 | |
406 | Here are values that are supposed to resemble a VGA screen, |
513 | Here are values that are supposed to resemble a VGA screen, |
407 | including the murky brown that passes for low-intensity yellow: |
514 | including the murky brown that passes for low-intensity yellow: |
408 | |
515 | |
409 | URxvt*color0: #000000 |
516 | URxvt.color0: #000000 |
410 | URxvt*color1: #A80000 |
517 | URxvt.color1: #A80000 |
411 | URxvt*color2: #00A800 |
518 | URxvt.color2: #00A800 |
412 | URxvt*color3: #A8A800 |
519 | URxvt.color3: #A8A800 |
413 | URxvt*color4: #0000A8 |
520 | URxvt.color4: #0000A8 |
414 | URxvt*color5: #A800A8 |
521 | URxvt.color5: #A800A8 |
415 | URxvt*color6: #00A8A8 |
522 | URxvt.color6: #00A8A8 |
416 | URxvt*color7: #A8A8A8 |
523 | URxvt.color7: #A8A8A8 |
417 | |
524 | |
418 | URxvt*color8: #000054 |
525 | URxvt.color8: #000054 |
419 | URxvt*color9: #FF0054 |
526 | URxvt.color9: #FF0054 |
420 | URxvt*color10: #00FF54 |
527 | URxvt.color10: #00FF54 |
421 | URxvt*color11: #FFFF54 |
528 | URxvt.color11: #FFFF54 |
422 | URxvt*color12: #0000FF |
529 | URxvt.color12: #0000FF |
423 | URxvt*color13: #FF00FF |
530 | URxvt.color13: #FF00FF |
424 | URxvt*color14: #00FFFF |
531 | URxvt.color14: #00FFFF |
425 | URxvt*color15: #FFFFFF |
532 | URxvt.color15: #FFFFFF |
426 | |
533 | |
427 | And here is a more complete set of non-standard colors described as |
534 | And here is a more complete set of non-standard colors described |
428 | "pretty girly": |
535 | (not by me) as "pretty girly". |
429 | |
536 | |
430 | URxvt.cursorColor: #dc74d1 |
537 | URxvt.cursorColor: #dc74d1 |
431 | URxvt.pointerColor: #dc74d1 |
538 | URxvt.pointerColor: #dc74d1 |
432 | URxvt.background: #0e0e0e |
539 | URxvt.background: #0e0e0e |
433 | URxvt.foreground: #4ad5e1 |
540 | URxvt.foreground: #4ad5e1 |
… | |
… | |
444 | URxvt.color6: #73f7ff |
551 | URxvt.color6: #73f7ff |
445 | URxvt.color14: #73f7ff |
552 | URxvt.color14: #73f7ff |
446 | URxvt.color7: #e1dddd |
553 | URxvt.color7: #e1dddd |
447 | URxvt.color15: #e1dddd |
554 | URxvt.color15: #e1dddd |
448 | |
555 | |
|
|
556 | How can I start rxvtd in a race-free way? |
|
|
557 | Try "rxvtd -f -o", which tells rxvtd to open the display, create the |
|
|
558 | listening socket and then fork. |
|
|
559 | |
449 | What's with the strange Backspace/Delete key behaviour? |
560 | What's with the strange Backspace/Delete key behaviour? |
450 | Assuming that the physical Backspace key corresponds to the |
561 | Assuming that the physical Backspace key corresponds to the |
451 | BackSpace keysym (not likely for Linux ... see the following |
562 | BackSpace keysym (not likely for Linux ... see the following |
452 | question) there are two standard values that can be used for |
563 | question) there are two standard values that can be used for |
453 | Backspace: "^H" and "^?". |
564 | Backspace: "^H" and "^?". |
… | |
… | |
471 | |
582 | |
472 | # use Backspace = ^? |
583 | # use Backspace = ^? |
473 | $ stty erase ^? |
584 | $ stty erase ^? |
474 | $ rxvt |
585 | $ rxvt |
475 | |
586 | |
476 | Toggle with "ESC[36h" / "ESC[36l" as documented in rxvt(7). |
587 | Toggle with "ESC [ 36 h" / "ESC [ 36 l" as documented in rxvt(7). |
477 | |
588 | |
478 | For an existing rxvt-unicode: |
589 | For an existing rxvt-unicode: |
479 | |
590 | |
480 | # use Backspace = ^H |
591 | # use Backspace = ^H |
481 | $ stty erase ^H |
592 | $ stty erase ^H |
… | |
… | |
490 | value properly reflects that. |
601 | value properly reflects that. |
491 | |
602 | |
492 | The Delete key is a another casualty of the ill-defined Backspace |
603 | The Delete key is a another casualty of the ill-defined Backspace |
493 | problem. To avoid confusion between the Backspace and Delete keys, |
604 | problem. To avoid confusion between the Backspace and Delete keys, |
494 | the Delete key has been assigned an escape sequence to match the |
605 | the Delete key has been assigned an escape sequence to match the |
495 | vt100 for Execute (ESC[3~) and is in the supplied termcap/terminfo. |
606 | vt100 for Execute ("ESC [ 3 ~") and is in the supplied |
|
|
607 | termcap/terminfo. |
496 | |
608 | |
497 | Some other Backspace problems: |
609 | Some other Backspace problems: |
498 | |
610 | |
499 | some editors use termcap/terminfo, some editors (vim I'm told) |
611 | some editors use termcap/terminfo, some editors (vim I'm told) |
500 | expect Backspace = ^H, GNU Emacs (and Emacs-like editors) use ^H for |
612 | expect Backspace = ^H, GNU Emacs (and Emacs-like editors) use ^H for |
… | |
… | |
506 | There are some compile-time selections available via configure. |
618 | There are some compile-time selections available via configure. |
507 | Unless you have run "configure" with the "--disable-resources" |
619 | Unless you have run "configure" with the "--disable-resources" |
508 | option you can use the `keysym' resource to alter the keystrings |
620 | option you can use the `keysym' resource to alter the keystrings |
509 | associated with keysyms. |
621 | associated with keysyms. |
510 | |
622 | |
511 | Here's an example for a URxvt session started using `rxvt -name |
623 | Here's an example for a URxvt session started using "rxvt -name |
512 | URxvt' |
624 | URxvt" |
513 | |
625 | |
514 | URxvt*keysym.Home: \e[1~ |
626 | URxvt.keysym.Home: \033[1~ |
515 | URxvt*keysym.End: \e[4~ |
627 | URxvt.keysym.End: \033[4~ |
516 | URxvt*keysym.C-apostrophe: \e<C-'> |
628 | URxvt.keysym.C-apostrophe: \033<C-'> |
517 | URxvt*keysym.C-slash: \e<C-/> |
629 | URxvt.keysym.C-slash: \033<C-/> |
518 | URxvt*keysym.C-semicolon: \e<C-;> |
630 | URxvt.keysym.C-semicolon: \033<C-;> |
519 | URxvt*keysym.C-grave: \e<C-`> |
631 | URxvt.keysym.C-grave: \033<C-`> |
520 | URxvt*keysym.C-comma: \e<C-,> |
632 | URxvt.keysym.C-comma: \033<C-,> |
521 | URxvt*keysym.C-period: \e<C-.> |
633 | URxvt.keysym.C-period: \033<C-.> |
522 | URxvt*keysym.C-0x60: \e<C-`> |
634 | URxvt.keysym.C-0x60: \033<C-`> |
523 | URxvt*keysym.C-Tab: \e<C-Tab> |
635 | URxvt.keysym.C-Tab: \033<C-Tab> |
524 | URxvt*keysym.C-Return: \e<C-Return> |
636 | URxvt.keysym.C-Return: \033<C-Return> |
525 | URxvt*keysym.S-Return: \e<S-Return> |
637 | URxvt.keysym.S-Return: \033<S-Return> |
526 | URxvt*keysym.S-space: \e<S-Space> |
638 | URxvt.keysym.S-space: \033<S-Space> |
527 | URxvt*keysym.M-Up: \e<M-Up> |
639 | URxvt.keysym.M-Up: \033<M-Up> |
528 | URxvt*keysym.M-Down: \e<M-Down> |
640 | URxvt.keysym.M-Down: \033<M-Down> |
529 | URxvt*keysym.M-Left: \e<M-Left> |
641 | URxvt.keysym.M-Left: \033<M-Left> |
530 | URxvt*keysym.M-Right: \e<M-Right> |
642 | URxvt.keysym.M-Right: \033<M-Right> |
531 | URxvt*keysym.M-C-0: list.0123456789.\e<M-C-.> |
643 | URxvt.keysym.M-C-0: list \033<M-C- 0123456789 > |
532 | URxvt*keysym.M-C-a: list.abcdefghijklmnopqrstuvwxyz.\033<M-C-.> |
644 | URxvt.keysym.M-C-a: list \033<M-C- abcdefghijklmnopqrstuvwxyz > |
533 | URxvt*keysym.F12: proto:\033]701;zh_CN.GBK\007 |
645 | URxvt.keysym.F12: command:\033]701;zh_CN.GBK\007 |
|
|
646 | |
|
|
647 | See some more examples in the documentation for the keysym resource. |
534 | |
648 | |
535 | I'm using keyboard model XXX that has extra Prior/Next/Insert keys. How |
649 | I'm using keyboard model XXX that has extra Prior/Next/Insert keys. How |
536 | do I make use of them? For example, the Sun Keyboard type 4 has the |
650 | do I make use of them? For example, the Sun Keyboard type 4 has the |
537 | following mappings that rxvt-unicode doesn't recognize. |
651 | following mappings that rxvt-unicode doesn't recognize. |
538 | KP_Insert == Insert |
652 | KP_Insert == Insert |
… | |
… | |
544 | |
658 | |
545 | Rather than have rxvt-unicode try to accommodate all the various |
659 | Rather than have rxvt-unicode try to accommodate all the various |
546 | possible keyboard mappings, it is better to use `xmodmap' to remap |
660 | possible keyboard mappings, it is better to use `xmodmap' to remap |
547 | the keys as required for your particular machine. |
661 | the keys as required for your particular machine. |
548 | |
662 | |
549 | How do I distinguish if I'm running rxvt-unicode or a regular xterm? I |
663 | How do I distinguish wether I'm running rxvt-unicode or a regular xterm? |
550 | need this to decide about setting colors etc. |
664 | I need this to decide about setting colors etc. |
551 | rxvt and rxvt-unicode always export the variable "COLORTERM", so you |
665 | rxvt and rxvt-unicode always export the variable "COLORTERM", so you |
552 | can check and see if that is set. Note that several programs, JED, |
666 | can check and see if that is set. Note that several programs, JED, |
553 | slrn, Midnight Commander automatically check this variable to decide |
667 | slrn, Midnight Commander automatically check this variable to decide |
554 | whether or not to use color. |
668 | whether or not to use color. |
555 | |
669 | |
… | |
… | |
586 | Before sending me mail, you could go to IRC: "irc.freenode.net", |
700 | Before sending me mail, you could go to IRC: "irc.freenode.net", |
587 | channel "#rxvt-unicode" has some rxvt-unicode enthusiasts that might |
701 | channel "#rxvt-unicode" has some rxvt-unicode enthusiasts that might |
588 | be interested in learning about new and exciting problems (but not |
702 | be interested in learning about new and exciting problems (but not |
589 | FAQs :). |
703 | FAQs :). |
590 | |
704 | |
591 | SYNOPSIS |
705 | RXVT TECHNICAL REFERENCE |
592 | # set a new font set |
|
|
593 | printf '\33]50;%s\007' 9x15,xft:Kochi" Mincho" |
|
|
594 | |
|
|
595 | # change the locale and tell rxvt-unicode about it |
|
|
596 | export LC_CTYPE=ja_JP.EUC-JP; printf "\33]701;$LC_CTYPE\007" |
|
|
597 | |
|
|
598 | # set window title |
|
|
599 | printf '\33]2;%s\007' "new window title" |
|
|
600 | |
|
|
601 | DESCRIPTION |
706 | DESCRIPTION |
602 | The rest of this document describes various technical aspects of |
707 | The rest of this document describes various technical aspects of |
603 | rxvt-unicode. First the description of supported command sequences, |
708 | rxvt-unicode. First the description of supported command sequences, |
604 | followed by menu and pixmap support and last by a description of all |
709 | followed by menu and pixmap support and last by a description of all |
605 | features selectable at "configure" time. |
710 | features selectable at "configure" time. |
606 | |
711 | |
607 | RXVT TECHNICAL REFERENCE |
|
|
608 | Definitions |
712 | Definitions |
609 | "c" The literal character c. |
713 | "c" The literal character c. |
610 | |
714 | |
611 | "C" A single (required) character. |
715 | "C" A single (required) character. |
612 | |
716 | |
… | |
… | |
697 | "ESC O" |
801 | "ESC O" |
698 | Single Shift Select of G3 Character Set (SS3): affects next |
802 | Single Shift Select of G3 Character Set (SS3): affects next |
699 | character only *unimplemented* |
803 | character only *unimplemented* |
700 | |
804 | |
701 | "ESC Z" |
805 | "ESC Z" |
702 | Obsolete form of returns: "ESC[?1;2C" *rxvt-unicode compile-time |
806 | Obsolete form of returns: "ESC [ ? 1 ; 2 C" *rxvt-unicode |
703 | option* |
807 | compile-time option* |
704 | |
808 | |
705 | "ESC c" |
809 | "ESC c" |
706 | Full reset (RIS) |
810 | Full reset (RIS) |
707 | |
811 | |
708 | "ESC n" |
812 | "ESC n" |
709 | Invoke the G2 Character Set (LS2) |
813 | Invoke the G2 Character Set (LS2) |
710 | |
814 | |
711 | "ESC o" |
815 | "ESC o" |
712 | Invoke the G3 Character Set (LS3) |
816 | Invoke the G3 Character Set (LS3) |
713 | |
817 | |
714 | "ESC" ( C> |
818 | "ESC ( C" |
715 | Designate G0 Character Set (ISO 2022), see below for values of "C". |
819 | Designate G0 Character Set (ISO 2022), see below for values of "C". |
716 | |
820 | |
717 | "ESC" ) C> |
821 | "ESC ) C" |
718 | Designate G1 Character Set (ISO 2022), see below for values of "C". |
822 | Designate G1 Character Set (ISO 2022), see below for values of "C". |
719 | |
823 | |
720 | "ESC * C" |
824 | "ESC * C" |
721 | Designate G2 Character Set (ISO 2022), see below for values of "C". |
825 | Designate G2 Character Set (ISO 2022), see below for values of "C". |
722 | |
826 | |
… | |
… | |
815 | "ESC [ Ps a" |
919 | "ESC [ Ps a" |
816 | See "ESC [ Ps C" |
920 | See "ESC [ Ps C" |
817 | |
921 | |
818 | "ESC [ Ps c" |
922 | "ESC [ Ps c" |
819 | Send Device Attributes (DA) "Ps = 0" (or omitted): request |
923 | Send Device Attributes (DA) "Ps = 0" (or omitted): request |
820 | attributes from terminal returns: "ESC[?1;2c" (``I am a VT100 with |
924 | attributes from terminal returns: "ESC [ ? 1 ; 2 c" (``I am a VT100 |
821 | Advanced Video Option'') |
925 | with Advanced Video Option'') |
822 | |
926 | |
823 | "ESC [ Ps d" |
927 | "ESC [ Ps d" |
824 | Cursor to Line "Ps" (VPA) |
928 | Cursor to Line "Ps" (VPA) |
825 | |
929 | |
826 | "ESC [ Ps e" |
930 | "ESC [ Ps e" |
… | |
… | |
900 | (CSR) |
1004 | (CSR) |
901 | |
1005 | |
902 | "ESC [ s" |
1006 | "ESC [ s" |
903 | Save Cursor (SC) |
1007 | Save Cursor (SC) |
904 | |
1008 | |
|
|
1009 | "ESC [ Ps;Pt t" |
|
|
1010 | Window Operations |
|
|
1011 | |
|
|
1012 | Ps = 1 Deiconify (map) window |
|
|
1013 | Ps = 2 Iconify window |
|
|
1014 | Ps = 3 ESC [ 3 ; X ; Y t Move window to (X|Y) |
|
|
1015 | Ps = 4 ESC [ 4 ; H ; W t Resize to WxH pixels |
|
|
1016 | Ps = 5 Raise window |
|
|
1017 | Ps = 6 Lower window |
|
|
1018 | Ps = 7 Refresh screen once |
|
|
1019 | Ps = 8 ESC [ 8 ; R ; C t Resize to R rows and C columns |
|
|
1020 | Ps = 11 Report window state (responds with Ps = 1 or Ps = 2) |
|
|
1021 | Ps = 13 Report window position (responds with Ps = 3) |
|
|
1022 | Ps = 14 Report window pixel size (responds with Ps = 4) |
|
|
1023 | Ps = 18 Report window text size (responds with Ps = 7) |
|
|
1024 | Ps = 19 Currently the same as Ps = 18, but responds with Ps = 9 |
|
|
1025 | Ps = 20 Reports icon label (ESC ] L NAME \234) |
|
|
1026 | Ps = 21 Reports window title (ESC ] l NAME \234) |
|
|
1027 | Ps = 24.. Set window height to Ps rows |
|
|
1028 | |
|
|
1029 | "ESC [ u" |
|
|
1030 | Restore Cursor |
|
|
1031 | |
905 | "ESC [ Ps x" |
1032 | "ESC [ Ps x" |
906 | Request Terminal Parameters (DECREQTPARM) |
1033 | Request Terminal Parameters (DECREQTPARM) |
907 | |
|
|
908 | "ESC [ u" |
|
|
909 | Restore Cursor |
|
|
910 | |
1034 | |
911 | |
1035 | |
912 | |
1036 | |
913 | DEC Private Modes |
1037 | DEC Private Modes |
914 | "ESC [ ? Pm h" |
1038 | "ESC [ ? Pm h" |
… | |
… | |
1056 | Ps = 13 Change colour of mouse foreground to Pt |
1180 | Ps = 13 Change colour of mouse foreground to Pt |
1057 | Ps = 17 Change colour of highlight characters to Pt |
1181 | Ps = 17 Change colour of highlight characters to Pt |
1058 | Ps = 18 Change colour of bold characters to Pt |
1182 | Ps = 18 Change colour of bold characters to Pt |
1059 | Ps = 19 Change colour of underlined characters to Pt |
1183 | Ps = 19 Change colour of underlined characters to Pt |
1060 | Ps = 20 Change default background to Pt |
1184 | Ps = 20 Change default background to Pt |
1061 | Ps = 39 Change default foreground colour to Pt rxvt compile-time option |
1185 | Ps = 39 Change default foreground colour to Pt. |
1062 | Ps = 46 Change Log File to Pt unimplemented |
1186 | Ps = 46 Change Log File to Pt unimplemented |
1063 | Ps = 49 Change default background colour to Pt rxvt compile-time option |
1187 | Ps = 49 Change default background colour to Pt. |
1064 | Ps = 50 Set fontset to Pt, with the following special values of Pt (rxvt) #+n change up n #-n change down n if n is missing of 0, a value of 1 is used empty change to font0 n change to font n |
1188 | Ps = 50 Set fontset to Pt, with the following special values of Pt (rxvt) #+n change up n #-n change down n if n is missing of 0, a value of 1 is used empty change to font0 n change to font n |
1065 | Ps = 55 Log all scrollback buffer and all of screen to Pt |
1189 | Ps = 55 Log all scrollback buffer and all of screen to Pt |
1066 | Ps = 701 Change current locale to Pt, or, if Pt is ?, return the current locale (rxvt extension) |
1190 | Ps = 701 Change current locale to Pt, or, if Pt is ?, return the current locale (Compile frills). |
1067 | Ps = 703 Menubar command Pt rxvt compile-time option (rxvt-unicode extension) |
1191 | Ps = 703 Menubar command Pt (Compile menubar). |
1068 | Ps = 704 Change colour of italic characters to Pt |
1192 | Ps = 704 Change colour of italic characters to Pt |
1069 | Ps = 705 Change background pixmap tint colour to Pt |
1193 | Ps = 705 Change background pixmap tint colour to Pt (Compile transparency). |
1070 | Ps = 710 Set normal fontset to Pt. Same as Ps = 50. |
1194 | Ps = 710 Set normal fontset to Pt. Same as Ps = 50. |
1071 | Ps = 711 Set bold fontset to Pt. Similar to Ps = 50. |
1195 | Ps = 711 Set bold fontset to Pt. Similar to Ps = 50 (Compile styles). |
1072 | Ps = 712 Set italic fontset to Pt. Similar to Ps = 50. |
1196 | Ps = 712 Set italic fontset to Pt. Similar to Ps = 50 (Compile styles). |
1073 | Ps = 713 Set bold-italic fontset to Pt. Similar to Ps = 50. |
1197 | Ps = 713 Set bold-italic fontset to Pt. Similar to Ps = 50 (Compile styles). |
|
|
1198 | Ps = 720 Move viewing window up by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills). |
|
|
1199 | Ps = 721 Move viewing window down by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills). |
1074 | |
1200 | |
1075 | |
1201 | |
1076 | |
1202 | |
1077 | menuBar |
1203 | menuBar |
1078 | The exact syntax used is *almost* solidified. In the menus, DON'T try to |
1204 | The exact syntax used is *almost* solidified. In the menus, DON'T try to |
… | |
… | |
1115 | [menu] |
1241 | [menu] |
1116 | access the current menuBar for alteration |
1242 | access the current menuBar for alteration |
1117 | |
1243 | |
1118 | [title:+*string*] |
1244 | [title:+*string*] |
1119 | set the current menuBar's title to *string*, which may contain the |
1245 | set the current menuBar's title to *string*, which may contain the |
1120 | following format specifiers: %% : literal % character %n : rxvt name |
1246 | following format specifiers: |
1121 | (as per the -name command-line option) %v : rxvt version |
1247 | |
|
|
1248 | B<%n> rxvt name (as per the B<-name> command-line option) |
|
|
1249 | B<%v> rxvt version |
|
|
1250 | B<%%> literal B<%> character |
1122 | |
1251 | |
1123 | [done] |
1252 | [done] |
1124 | set menuBar access as readonly. End-of-file tag for [read:+*file*] |
1253 | set menuBar access as readonly. End-of-file tag for [read:+*file*] |
1125 | operations. |
1254 | operations. |
1126 | |
1255 | |
… | |
… | |
1230 | |
1359 | |
1231 | As a convenience for the many Emacs-type editors, *action* may start |
1360 | As a convenience for the many Emacs-type editors, *action* may start |
1232 | with M- (eg, M-$ is equivalent to \E$) and a CR will be appended if |
1361 | with M- (eg, M-$ is equivalent to \E$) and a CR will be appended if |
1233 | missed from M-x commands. |
1362 | missed from M-x commands. |
1234 | |
1363 | |
1235 | As a convenience for issuing XTerm ESC] sequences from a menubar (or |
1364 | As a convenience for issuing XTerm ESC ] sequences from a menubar (or |
1236 | quick arrow), a BEL (^G) will be appended if needed. |
1365 | quick arrow), a BEL (^G) will be appended if needed. |
1237 | |
1366 | |
1238 | For example, |
1367 | For example, |
1239 | M-xapropos is equivalent to \Exapropos\r |
1368 | M-xapropos is equivalent to \Exapropos\r |
1240 | |
1369 | |
… | |
… | |
1540 | XK_KP_8 8 ESC O x |
1669 | XK_KP_8 8 ESC O x |
1541 | XK_KP_9 9 ESC O y |
1670 | XK_KP_9 9 ESC O y |
1542 | |
1671 | |
1543 | CONFIGURE OPTIONS |
1672 | CONFIGURE OPTIONS |
1544 | General hint: if you get compile errors, then likely your configuration |
1673 | General hint: if you get compile errors, then likely your configuration |
1545 | hasn't been tested well. Either try with --enable-everything or use the |
1674 | hasn't been tested well. Either try with "--enable-everything" or use |
1546 | ./reconf script as a base for experiments. ./reconf is used by myself, |
1675 | the ./reconf script as a base for experiments. ./reconf is used by |
1547 | so it should generally be a working config. Of course, you should always |
1676 | myself, so it should generally be a working config. Of course, you |
1548 | report when a combination doesn't work, so it can be fixed. Marc Lehmann |
1677 | should always report when a combination doesn't work, so it can be |
1549 | <rxvt@schmorp.de>. |
1678 | fixed. Marc Lehmann <rxvt@schmorp.de>. |
|
|
1679 | |
|
|
1680 | All |
1550 | |
1681 | |
1551 | --enable-everything |
1682 | --enable-everything |
1552 | Add support for all non-multichoice options listed in "./configure |
1683 | Add (or remove) support for all non-multichoice options listed in |
1553 | --help". Note that unlike other enable options this is order |
1684 | "./configure --help". |
1554 | dependant. You can specify this and then disable options which this |
|
|
1555 | enables by *following* this with the appropriate commands. |
|
|
1556 | |
1685 | |
1557 | --enable-xft |
1686 | You can specify this and then disable options you do not like by |
|
|
1687 | *following* this with the appropriate "--disable-..." arguments, or |
|
|
1688 | you can start with a minimal configuration by specifying |
|
|
1689 | "--disable-everything" and than adding just the "--enable-..." |
|
|
1690 | arguments you want. |
|
|
1691 | |
|
|
1692 | --enable-xft (default: enabled) |
1558 | Add support for Xft (anti-aliases, among others) fonts. Xft fonts |
1693 | Add support for Xft (anti-aliases, among others) fonts. Xft fonts |
1559 | are slower and require lots of memory, but as long as you don't use |
1694 | are slower and require lots of memory, but as long as you don't use |
1560 | them, you don't pay for them. |
1695 | them, you don't pay for them. |
1561 | |
1696 | |
1562 | --enable-font-styles |
1697 | --enable-font-styles (default: on) |
1563 | Add support for bold, *italic* and *bold italic* font styles. The |
1698 | Add support for bold, *italic* and *bold italic* font styles. The |
1564 | fonts can be set manually or automatically. |
1699 | fonts can be set manually or automatically. |
1565 | |
1700 | |
1566 | --with-codesets=NAME,... |
1701 | --with-codesets=NAME,... (default: all) |
1567 | Compile in support for additional codeset (encoding) groups (eu, vn |
1702 | Compile in support for additional codeset (encoding) groups ("eu", |
1568 | are always compiled in, which includes most 8-bit character sets). |
1703 | "vn" are always compiled in, which includes most 8-bit character |
1569 | These codeset tables are currently only used for driving X11 core |
1704 | sets). These codeset tables are used for driving X11 core fonts, |
1570 | fonts, they are not required for Xft fonts. Compiling them in will |
1705 | they are not required for Xft fonts, although having them compiled |
1571 | make your binary bigger (together about 700kB), but it doesn't |
1706 | in lets rxvt-unicode choose replacement fonts more intelligently. |
1572 | increase memory usage unless you use an X11 font requiring one of |
1707 | Compiling them in will make your binary bigger (all of together cost |
1573 | these encodings. |
1708 | about 700kB), but it doesn't increase memory usage unless you use a |
|
|
1709 | font requiring one of these encodings. |
1574 | |
1710 | |
1575 | all all available codeset groups |
1711 | all all available codeset groups |
1576 | zh common chinese encodings |
1712 | zh common chinese encodings |
1577 | zh_ext rarely used but very big chinese encodigs |
1713 | zh_ext rarely used but very big chinese encodigs |
1578 | jp common japanese encodings |
1714 | jp common japanese encodings |
1579 | jp_ext rarely used but big japanese encodings |
1715 | jp_ext rarely used but big japanese encodings |
1580 | kr korean encodings |
1716 | kr korean encodings |
1581 | |
1717 | |
1582 | --enable-xim |
1718 | --enable-xim (default: on) |
1583 | Add support for XIM (X Input Method) protocol. This allows using |
1719 | Add support for XIM (X Input Method) protocol. This allows using |
1584 | alternative input methods (e.g. kinput2) and will also correctly set |
1720 | alternative input methods (e.g. kinput2) and will also correctly set |
1585 | up the input for people using dead keys or compose keys. |
1721 | up the input for people using dead keys or compose keys. |
1586 | |
1722 | |
1587 | --enable-unicode3 |
1723 | --enable-unicode3 (default: off) |
1588 | Enable direct support for displaying unicode codepoints above 65535 |
1724 | Enable direct support for displaying unicode codepoints above 65535 |
1589 | (the basic multilingual page). This increases storage requirements |
1725 | (the basic multilingual page). This increases storage requirements |
1590 | per character from 2 to 4 bytes. X11 fonts do not yet support these |
1726 | per character from 2 to 4 bytes. X11 fonts do not yet support these |
1591 | extra characters, but Xft does. |
1727 | extra characters, but Xft does. |
1592 | |
1728 | |
… | |
… | |
1594 | even without this flag, but the number of such characters is limited |
1730 | even without this flag, but the number of such characters is limited |
1595 | to a view thousand (shared with combining characters, see next |
1731 | to a view thousand (shared with combining characters, see next |
1596 | switch), and right now rxvt-unicode cannot display them |
1732 | switch), and right now rxvt-unicode cannot display them |
1597 | (input/output and cut&paste still work, though). |
1733 | (input/output and cut&paste still work, though). |
1598 | |
1734 | |
1599 | --enable-combining |
1735 | --enable-combining (default: on) |
1600 | Enable automatic composition of combining characters into composite |
1736 | Enable automatic composition of combining characters into composite |
1601 | characters. This is required for proper viewing of text where |
1737 | characters. This is required for proper viewing of text where |
1602 | accents are encoded as seperate unicode characters. This is done by |
1738 | accents are encoded as seperate unicode characters. This is done by |
1603 | using precomposited characters when available or creating new |
1739 | using precomposited characters when available or creating new |
1604 | pseudo-characters when no precomposed form exists. |
1740 | pseudo-characters when no precomposed form exists. |
1605 | |
1741 | |
1606 | Without --enable-unicode3, the number of additional precomposed |
1742 | Without --enable-unicode3, the number of additional precomposed |
1607 | characters is rather limited (2048, if this is full, rxvt will use |
1743 | characters is rather limited (2048, if this is full, rxvt-unicode |
1608 | the private use area, extending the number of combinations to 8448). |
1744 | will use the private use area, extending the number of combinations |
1609 | With --enable-unicode3, no practical limit exists. This will also |
1745 | to 8448). With --enable-unicode3, no practical limit exists. |
1610 | enable storage of characters >65535. |
1746 | |
|
|
1747 | This option will also enable storage (but not display) of characters |
|
|
1748 | beyond plane 0 (>65535) when --enable-unicode3 was not specified. |
1611 | |
1749 | |
1612 | The combining table also contains entries for arabic presentation |
1750 | The combining table also contains entries for arabic presentation |
1613 | forms, but these are not currently used. Bug me if you want these to |
1751 | forms, but these are not currently used. Bug me if you want these to |
1614 | be used. |
1752 | be used (and tell me how these are to be used...). |
1615 | |
1753 | |
1616 | --enable-fallback(=CLASS) |
1754 | --enable-fallback(=CLASS) (default: Rxvt) |
1617 | When reading resource settings, also read settings for class CLASS |
1755 | When reading resource settings, also read settings for class CLASS. |
1618 | (default: Rxvt). To disable resource fallback use |
1756 | To disable resource fallback use --disable-fallback. |
1619 | --disable-fallback. |
|
|
1620 | |
1757 | |
1621 | --with-res-name=NAME |
1758 | --with-res-name=NAME (default: urxvt) |
1622 | Use the given name (default: urxvt) as default application name when |
1759 | Use the given name as default application name when reading |
1623 | reading resources. Specify --with-res-name=rxvt to replace rxvt. |
1760 | resources. Specify --with-res-name=rxvt to replace rxvt. |
1624 | |
1761 | |
1625 | --with-res-class=CLASS |
1762 | --with-res-class=CLASS /default: URxvt) |
1626 | Use the given class (default: URxvt) as default application class |
1763 | Use the given class as default application class when reading |
1627 | when reading resources. Specify --with-res-class=Rxvt to replace |
1764 | resources. Specify --with-res-class=Rxvt to replace rxvt. |
1628 | rxvt. |
|
|
1629 | |
1765 | |
1630 | --enable-utmp |
1766 | --enable-utmp (default: on) |
1631 | Write user and tty to utmp file (used by programs like w) at start |
1767 | Write user and tty to utmp file (used by programs like w) at start |
1632 | of rxvt execution and delete information when rxvt exits. |
1768 | of rxvt execution and delete information when rxvt exits. |
1633 | |
1769 | |
1634 | --enable-wtmp |
1770 | --enable-wtmp (default: on) |
1635 | Write user and tty to wtmp file (used by programs like last) at |
1771 | Write user and tty to wtmp file (used by programs like last) at |
1636 | start of rxvt execution and write logout when rxvt exits. This |
1772 | start of rxvt execution and write logout when rxvt exits. This |
1637 | option requires --enable-utmp to also be specified. |
1773 | option requires --enable-utmp to also be specified. |
1638 | |
1774 | |
1639 | --enable-lastlog |
1775 | --enable-lastlog (default: on) |
1640 | Write user and tty to lastlog file (used by programs like lastlogin) |
1776 | Write user and tty to lastlog file (used by programs like lastlogin) |
1641 | at start of rxvt execution. This option requires --enable-utmp to |
1777 | at start of rxvt execution. This option requires --enable-utmp to |
1642 | also be specified. |
1778 | also be specified. |
1643 | |
1779 | |
1644 | --enable-xpm-background |
1780 | --enable-xpm-background (default: off) |
1645 | Add support for XPM background pixmaps. |
1781 | Add support for XPM background pixmaps. |
1646 | |
1782 | |
1647 | --enable-transparency |
1783 | --enable-transparency (default: off) |
1648 | Add support for inheriting parent backgrounds thus giving a fake |
1784 | Add support for inheriting parent backgrounds thus giving a fake |
1649 | transparency to the term. |
1785 | transparency to the term. |
1650 | |
1786 | |
1651 | --enable-fading |
1787 | --enable-fading (default: on) |
1652 | Add support for fading the text when focus is lost. |
1788 | Add support for fading the text when focus is lost (requires |
|
|
1789 | "--enable-transparency"). |
1653 | |
1790 | |
1654 | --enable-tinting |
1791 | --enable-tinting (default: on) |
1655 | Add support for tinting of transparent backgrounds. |
1792 | Add support for tinting of transparent backgrounds (requires |
|
|
1793 | "--enable-transparency"). |
1656 | |
1794 | |
1657 | --enable-menubar |
1795 | --enable-menubar (default: off) |
1658 | Add support for our menu bar system (this interacts badly with |
1796 | Add support for our menu bar system (this interacts badly with |
1659 | dynamic locale switching currently). |
1797 | dynamic locale switching currently). |
1660 | |
1798 | |
1661 | --enable-rxvt-scroll |
1799 | --enable-rxvt-scroll (default: on) |
1662 | Add support for the original rxvt scrollbar. |
1800 | Add support for the original rxvt scrollbar. |
1663 | |
1801 | |
1664 | --enable-next-scroll |
1802 | --enable-next-scroll (default: on) |
1665 | Add support for a NeXT-like scrollbar. |
1803 | Add support for a NeXT-like scrollbar. |
1666 | |
1804 | |
1667 | --enable-xterm-scroll |
1805 | --enable-xterm-scroll (default: on) |
1668 | Add support for an Xterm-like scrollbar. |
1806 | Add support for an Xterm-like scrollbar. |
1669 | |
1807 | |
1670 | --enable-plain-scroll |
1808 | --enable-plain-scroll (default: on) |
1671 | Add support for a very unobtrusive, plain-looking scrollbar that is |
1809 | Add support for a very unobtrusive, plain-looking scrollbar that is |
1672 | the favourite of the rxvt-unicode author, having used it for many |
1810 | the favourite of the rxvt-unicode author, having used it for many |
1673 | years. |
1811 | years. |
1674 | |
1812 | |
1675 | --enable-half-shadow |
1813 | --enable-half-shadow (default: off) |
1676 | Make shadows on the scrollbar only half the normal width & height. |
1814 | Make shadows on the scrollbar only half the normal width & height. |
1677 | only applicable to rxvt scrollbars. |
1815 | only applicable to rxvt scrollbars. |
1678 | |
1816 | |
1679 | --enable-ttygid |
1817 | --enable-ttygid (default: off) |
1680 | Change tty device setting to group "tty" - only use this if your |
1818 | Change tty device setting to group "tty" - only use this if your |
1681 | system uses this type of security. |
1819 | system uses this type of security. |
1682 | |
1820 | |
1683 | --disable-backspace-key |
1821 | --disable-backspace-key |
1684 | Disable any handling of the backspace key by us - let the X server |
1822 | Removes any handling of the backspace key by us - let the X server |
1685 | do it. |
1823 | do it. |
1686 | |
1824 | |
1687 | --disable-delete-key |
1825 | --disable-delete-key |
1688 | Disable any handling of the delete key by us - let the X server do |
1826 | Removes any handling of the delete key by us - let the X server do |
1689 | it. |
1827 | it. |
1690 | |
1828 | |
1691 | --disable-resources |
1829 | --disable-resources |
1692 | Remove all resources checking. |
1830 | Removes any support for resource checking. |
1693 | |
1831 | |
1694 | --enable-xgetdefault |
1832 | --enable-xgetdefault |
1695 | Make resources checking via XGetDefault() instead of our small |
1833 | Make resources checking via XGetDefault() instead of our small |
1696 | version which only checks ~/.Xdefaults, or if that doesn't exist |
1834 | version which only checks ~/.Xdefaults, or if that doesn't exist |
1697 | then ~/.Xresources. |
1835 | then ~/.Xresources. |
1698 | |
1836 | |
1699 | --enable-strings |
1837 | Please note that nowadays, things like XIM will automatically pull |
|
|
1838 | in and use the full X resource manager, so the overhead of using it |
|
|
1839 | might be very small, if nonexistant. |
|
|
1840 | |
|
|
1841 | --enable-strings (default: off) |
1700 | Add support for our possibly faster memset() function and other |
1842 | Add support for our possibly faster memset() function and other |
1701 | various routines, overriding your system's versions which may have |
1843 | various routines, overriding your system's versions which may have |
1702 | been hand-crafted in assembly or may require extra libraries to link |
1844 | been hand-crafted in assembly or may require extra libraries to link |
1703 | in. (this breaks ANSI-C rules and has problems on many GNU/Linux |
1845 | in. (this breaks ANSI-C rules and has problems on many GNU/Linux |
1704 | systems). |
1846 | systems). |
1705 | |
1847 | |
1706 | --disable-swapscreen |
1848 | --disable-swapscreen |
1707 | Remove support for swap screen. |
1849 | Remove support for secondary/swap screen. |
1708 | |
1850 | |
1709 | --enable-frills |
1851 | --enable-frills (default: on) |
1710 | Add support for many small features that are not essential but nice |
1852 | Add support for many small features that are not essential but nice |
1711 | to have. Normally you want this, but for very small binaries you may |
1853 | to have. Normally you want this, but for very small binaries you may |
1712 | want to disable this. |
1854 | want to disable this. |
1713 | |
1855 | |
1714 | A non-exhaustive list of features enabled by "--enable-frills" |
1856 | A non-exhaustive list of features enabled by "--enable-frills" |
1715 | (possibly in combination with other switches) is: |
1857 | (possibly in combination with other switches) is: |
1716 | |
1858 | |
1717 | MWM-hints |
1859 | MWM-hints |
|
|
1860 | EWMH-hints (pid, utf8 names) and protocols (ping) |
1718 | seperate underline colour |
1861 | seperate underline colour |
1719 | settable border widths and borderless switch |
1862 | settable border widths and borderless switch |
1720 | settable extra linespacing |
1863 | settable extra linespacing |
1721 | extra window properties (e.g. UTF-8 window names and PID) |
|
|
1722 | iso-14755-2 and -3, and visual feedback |
1864 | iso-14755-2 and -3, and visual feedback |
1723 | backindex and forwardindex escape sequence |
1865 | backindex and forwardindex escape sequence |
1724 | window op and locale change escape sequences |
1866 | window op and some xterm/OSC escape sequences |
1725 | tripleclickwords |
1867 | tripleclickwords |
1726 | settable insecure mode |
1868 | settable insecure mode |
|
|
1869 | keysym remapping support |
|
|
1870 | cursor blinking and underline cursor |
|
|
1871 | -embed and -pty-fd options |
1727 | |
1872 | |
1728 | --enable-iso14755 |
1873 | --enable-iso14755 (default: on) |
1729 | Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt). |
1874 | Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt). |
1730 | Basic support (section 5.1) is enabled by "--enable-frills", while |
1875 | Basic support (section 5.1) is enabled by "--enable-frills", while |
1731 | support for 5.2, 5.3 and 5.4 is enabled with this switch. |
1876 | support for 5.2, 5.3 and 5.4 is enabled with this switch. |
1732 | |
1877 | |
1733 | --enable-keepscrolling |
1878 | --enable-keepscrolling (default: on) |
1734 | Add support for continual scrolling of the display when you hold the |
1879 | Add support for continual scrolling of the display when you hold the |
1735 | mouse button down on a scrollbar arrow. |
1880 | mouse button down on a scrollbar arrow. |
1736 | |
1881 | |
1737 | --enable-mousewheel |
1882 | --enable-mousewheel (default: on) |
1738 | Add support for scrolling via mouse wheel or buttons 4 & 5. |
1883 | Add support for scrolling via mouse wheel or buttons 4 & 5. |
1739 | |
1884 | |
1740 | --enable-slipwheeling |
1885 | --enable-slipwheeling (default: on) |
1741 | Add support for continual scrolling (using the mouse wheel as an |
1886 | Add support for continual scrolling (using the mouse wheel as an |
1742 | accelerator) while the control key is held down. This option |
1887 | accelerator) while the control key is held down. This option |
1743 | requires --enable-mousewheel to also be specified. |
1888 | requires --enable-mousewheel to also be specified. |
1744 | |
1889 | |
1745 | --disable-new-selection |
1890 | --disable-new-selection |
1746 | Remove support for mouse selection style like that of xterm. |
1891 | Remove support for mouse selection style like that of xterm. |
1747 | |
1892 | |
1748 | --enable-dmalloc |
1893 | --enable-dmalloc (default: off) |
1749 | Use Gray Watson's malloc - which is good for debugging See |
1894 | Use Gray Watson's malloc - which is good for debugging See |
1750 | http://www.letters.com/dmalloc/ for details If you use either this |
1895 | http://www.letters.com/dmalloc/ for details If you use either this |
1751 | or the next option, you may need to edit src/Makefile after |
1896 | or the next option, you may need to edit src/Makefile after |
1752 | compiling to point DINCLUDE and DLIB to the right places. |
1897 | compiling to point DINCLUDE and DLIB to the right places. |
1753 | |
1898 | |
1754 | You can only use either this option and the following (should you |
1899 | You can only use either this option and the following (should you |
1755 | use either) . |
1900 | use either) . |
1756 | |
1901 | |
1757 | --enable-dlmalloc |
1902 | --enable-dlmalloc (default: off) |
1758 | Use Doug Lea's malloc - which is good for a production version See |
1903 | Use Doug Lea's malloc - which is good for a production version See |
1759 | <http://g.oswego.edu/dl/html/malloc.html> for details. |
1904 | <http://g.oswego.edu/dl/html/malloc.html> for details. |
1760 | |
1905 | |
1761 | --enable-smart-resize |
1906 | --enable-smart-resize (default: on) |
1762 | Add smart growth/shrink behaviour when changing font size via from |
1907 | Add smart growth/shrink behaviour when changing font size via hot |
1763 | hot keys. This should keep in a fixed position the rxvt corner which |
1908 | keys. This should keep the window corner which is closest to a |
1764 | is closest to a corner of the screen. |
1909 | corner of the screen in a fixed position. |
1765 | |
1910 | |
1766 | --enable-cursor-blink |
|
|
1767 | Add support for a blinking cursor. |
|
|
1768 | |
|
|
1769 | --enable-pointer-blank |
1911 | --enable-pointer-blank (default: on) |
1770 | Add support to have the pointer disappear when typing or inactive. |
1912 | Add support to have the pointer disappear when typing or inactive. |
1771 | |
1913 | |
1772 | --with-name=NAME |
1914 | --with-name=NAME (default: urxvt) |
1773 | Set the basename for the installed binaries (default: "urxvt", |
1915 | Set the basename for the installed binaries, resulting in "urxvt", |
1774 | resulting in "urxvt", "urxvtd" etc.). Specify "--with-name=rxvt" to |
1916 | "urxvtd" etc.). Specify "--with-name=rxvt" to replace with "rxvt". |
1775 | replace with "rxvt". |
|
|
1776 | |
1917 | |
1777 | --with-term=NAME |
1918 | --with-term=NAME (default: rxvt-unicode) |
1778 | Change the environmental variable for the terminal to NAME (default |
1919 | Change the environmental variable for the terminal to NAME. |
1779 | "rxvt-unicode") |
|
|
1780 | |
1920 | |
1781 | --with-terminfo=PATH |
1921 | --with-terminfo=PATH |
1782 | Change the environmental variable for the path to the terminfo tree |
1922 | Change the environmental variable for the path to the terminfo tree |
1783 | to PATH. |
1923 | to PATH. |
1784 | |
1924 | |