ViewVC Help
View File | Revision Log | Show Annotations | Download File
/cvs/rxvt-unicode/doc/rxvt.7.txt
(Generate patch)

Comparing rxvt-unicode/doc/rxvt.7.txt (file contents):
Revision 1.23 by root, Wed Aug 10 01:44:35 2005 UTC vs.
Revision 1.37 by root, Wed Jan 11 05:29:40 2006 UTC

… …
18 The newest version of this document is also available on the World Wide 18 The newest version of this document is also available on the World Wide
19 Web at 19 Web at
20 <http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>. 20 <http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>.
21 21
22FREQUENTLY ASKED QUESTIONS 22FREQUENTLY ASKED QUESTIONS
23 Isn't rxvt supposed to be small? Don't all those features bloat?
24 I often get asked about this, and I think, no, they didn't cause
25 extra bloat. If you compare a minimal rxvt and a minimal urxvt, you
26 can see that the urxvt binary is larger (due to some encoding tables
27 always being compiled in), but it actually uses less memory (RSS)
28 after startup. Even with "--disable-everything", this comparison is
29 a bit unfair, as many features unique to urxvt (locale, encoding
30 conversion, iso14755 etc.) are already in use in this mode.
31
32 text data bss drs rss filename
33 98398 1664 24 15695 1824 rxvt --disable-everything
34 188985 9048 66616 18222 1788 urxvt --disable-everything
35
36 When you "--enable-everything" (which _is_ unfair, as this involves
37 xft and full locale/XIM support which are quite bloaty inside libX11
38 and my libc), the two diverge, but not unreasnobaly so.
39
40 text data bss drs rss filename
41 163431 2152 24 20123 2060 rxvt --enable-everything
42 1035683 49680 66648 29096 3680 urxvt --enable-everything
43
44 The very large size of the text section is explained by the
45 east-asian encoding tables, which, if unused, take up disk space but
46 nothing else and can be compiled out unless you rely on X11 core
47 fonts that use those encodings. The BSS size comes from the 64k
48 emergency buffer that my c++ compiler allocates (but of course
49 doesn't use unless you are out of memory). Also, using an xft font
50 instead of a core font immediately adds a few megabytes of RSS. Xft
51 indeed is responsible for a lot of RSS even when not used.
52
53 Of course, due to every character using two or four bytes instead of
54 one, a large scrollback buffer will ultimately make rxvt-unicode use
55 more memory.
56
57 Compared to e.g. Eterm (5112k), aterm (3132k) and xterm (4680k),
58 this still fares rather well. And compared to some monsters like
59 gnome-terminal (21152k + extra 4204k in separate processes) or
60 konsole (22200k + extra 43180k in daemons that stay around after
61 exit, plus half a minute of startup time, including the hundreds of
62 warnings it spits out), it fares extremely well *g*.
63
64 Why C++, isn't that unportable/bloated/uncool?
65 Is this a question? :) It comes up very often. The simple answer is:
66 I had to write it, and C++ allowed me to write and maintain it in a
67 fraction of the time and effort (which is a scarce resource for me).
68 Put even shorter: It simply wouldn't exist without C++.
69
70 My personal stance on this is that C++ is less portable than C, but
71 in the case of rxvt-unicode this hardly matters, as its portability
72 limits are defined by things like X11, pseudo terminals, locale
73 support and unix domain sockets, which are all less portable than
74 C++ itself.
75
76 Regarding the bloat, see the above question: It's easy to write
77 programs in C that use gobs of memory, an certainly possible to
78 write programs in C++ that don't. C++ also often comes with large
79 libraries, but this is not necessarily the case with GCC. Here is
80 what rxvt links against on my system with a minimal config:
81
82 libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
83 libc.so.6 => /lib/libc.so.6 (0x00002aaaaadde000)
84 libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab01d000)
85 /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
86
87 And here is rxvt-unicode:
88
89 libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
90 libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000)
91 libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000)
92 libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000)
93 /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
94
95 No large bloated libraries (of course, none were linked in
96 statically), except maybe libX11 :)
97
98 Does it support tabs, can I have a tabbed rxvt-unicode?
99 rxvt-unicode does not directly support tabs. It will work fine with
100 tabbing functionality of many window managers or similar tabbing
101 programs, and its embedding-features allow it to be embedded into
102 other programs, as witnessed by doc/rxvt-tabbed or the upcoming
103 "Gtk2::URxvt" perl module, which features a tabbed urxvt (murxvt)
104 terminal as an example embedding application.
105
23 How do I know which rxvt-unicode version I'm using? 106 How do I know which rxvt-unicode version I'm using?
24 The version number is displayed with the usage (-h). Also the escape 107 The version number is displayed with the usage (-h). Also the escape
25 sequence "ESC [ 8 n" sets the window title to the version number. 108 sequence "ESC [ 8 n" sets the window title to the version number.
109 When using the rxvtc client, the version displayed is that of the
110 daemon.
26 111
27 I am using Debian GNU/Linux and have a problem... 112 I am using Debian GNU/Linux and have a problem...
28 The Debian GNU/Linux package of rxvt-unicode in sarge contains large 113 The Debian GNU/Linux package of rxvt-unicode in sarge contains large
29 patches that considerably change the behaviour of rxvt-unicode. 114 patches that considerably change the behaviour of rxvt-unicode.
30 Before reporting a bug to the original rxvt-unicode author please 115 Before reporting a bug to the original rxvt-unicode author please
… …
36 121
37 For other problems that also affect the Debian package, you can and 122 For other problems that also affect the Debian package, you can and
38 probably should use the Debian BTS, too, because, after all, it's 123 probably should use the Debian BTS, too, because, after all, it's
39 also a bug in the Debian version and it serves as a reminder for 124 also a bug in the Debian version and it serves as a reminder for
40 other users that might encounter the same issue. 125 other users that might encounter the same issue.
126
127 I am maintaining rxvt-unicode for distribution/OS XXX, any
128 recommendation?
129 You should build one binary with the default options. configure now
130 enables most useful options, and the trend goes to making them
131 runtime-switchable, too, so there is usually no drawback to enbaling
132 them, except higher disk and possibly memory usage. The perl
133 interpreter should be enabled, as important functionality (menus,
134 selection, likely more in the future) depends on it.
135
136 You should not overwrite the "perl-ext-common" snd "perl-ext"
137 resources system-wide (except maybe with "defaults"). This will
138 result in useful behaviour. If your distribution aims at low memory,
139 add an empty "perl-ext-common" resource to the app-defaults file.
140 This will keep the perl interpreter disabled until the user enables
141 it.
142
143 If you can/want build more binaries, I recommend building a minimal
144 one with "--disable-everything" (very useful) and a maximal one with
145 "--enable-everything" (less useful, it will be very big due to a lot
146 of encodings built-in that increase download times and are rarely
147 used).
148
149 I need to make it setuid/setgid to support utmp/ptys on my OS, is this
150 safe?
151 Likely not. While I honestly try to make it secure, and am probably
152 not bad at it, I think it is simply unreasonable to expect all of
153 freetype + fontconfig + xft + xlib + ... + rxvt-unicode itself to
154 all be secure. Also, rxvt-unicode disables some options when it
155 detects that it runs setuid or setgid, which is not nice.
156
157 Elevated privileges are only required for utmp and pty operations on
158 some systems (for example, GNU/Linux doesn't need any extra
159 privileges for ptys, but some need it for utmp support). If
160 rxvt-unicode doesn't support the library/setuid helper that your OS
161 needs I'll be happy to assist you in implementing support for it.
162
163 So, while setuid/setgid operation is supported and not a problem on
164 your typical single-user-no-other-logins unix desktop, always
165 remember that its an awful lot of code, most of which isn't checked
166 for security issues regularly.
41 167
42 When I log-in to another system it tells me about missing terminfo data? 168 When I log-in to another system it tells me about missing terminfo data?
43 The terminal description used by rxvt-unicode is not as widely 169 The terminal description used by rxvt-unicode is not as widely
44 available as that for xterm, or even rxvt (for which the same 170 available as that for xterm, or even rxvt (for which the same
45 problem often arises). 171 problem often arises).
… …
1146 1272
1147 "Ps = 1011" (rxvt) 1273 "Ps = 1011" (rxvt)
1148 h Scroll to bottom when a key is pressed 1274 h Scroll to bottom when a key is pressed
1149 l Don't scroll to bottom when a key is pressed 1275 l Don't scroll to bottom when a key is pressed
1150 1276
1277 "Ps = 1021" (rxvt)
1278 h Bold/italic implies high intensity (see option -is)
1279 l Font styles have no effect on intensity (Compile styles)
1280
1151 "Ps = 1047" 1281 "Ps = 1047"
1152 h Use Alternate Screen Buffer 1282 h Use Alternate Screen Buffer
1153 l Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it 1283 l Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it
1154 1284
1155 "Ps = 1048" 1285 "Ps = 1048"
… …
1177 Ps = 10 Change colour of text foreground to Pt (NB: may change in future) 1307 Ps = 10 Change colour of text foreground to Pt (NB: may change in future)
1178 Ps = 11 Change colour of text background to Pt (NB: may change in future) 1308 Ps = 11 Change colour of text background to Pt (NB: may change in future)
1179 Ps = 12 Change colour of text cursor foreground to Pt 1309 Ps = 12 Change colour of text cursor foreground to Pt
1180 Ps = 13 Change colour of mouse foreground to Pt 1310 Ps = 13 Change colour of mouse foreground to Pt
1181 Ps = 17 Change colour of highlight characters to Pt 1311 Ps = 17 Change colour of highlight characters to Pt
1182 Ps = 18 Change colour of bold characters to Pt 1312 Ps = 18 Change colour of bold characters to Pt [deprecated, see 706]
1183 Ps = 19 Change colour of underlined characters to Pt 1313 Ps = 19 Change colour of underlined characters to Pt [deprecated, see 707]
1184 Ps = 20 Change default background to Pt 1314 Ps = 20 Change default background to Pt
1185 Ps = 39 Change default foreground colour to Pt. 1315 Ps = 39 Change default foreground colour to Pt.
1186 Ps = 46 Change Log File to Pt unimplemented 1316 Ps = 46 Change Log File to Pt unimplemented
1187 Ps = 49 Change default background colour to Pt. 1317 Ps = 49 Change default background colour to Pt.
1188 Ps = 50 Set fontset to Pt, with the following special values of Pt (rxvt) #+n change up n #-n change down n if n is missing of 0, a value of 1 is used empty change to font0 n change to font n 1318 Ps = 50 Set fontset to Pt, with the following special values of Pt (rxvt) #+n change up n #-n change down n if n is missing of 0, a value of 1 is used empty change to font0 n change to font n
1189 Ps = 55 Log all scrollback buffer and all of screen to Pt 1319 Ps = 55 Log all scrollback buffer and all of screen to Pt
1190 Ps = 701 Change current locale to Pt, or, if Pt is ?, return the current locale (Compile frills). 1320 Ps = 701 Change current locale to Pt, or, if Pt is ?, return the current locale (Compile frills).
1191 Ps = 703 Menubar command Pt (Compile menubar). 1321 Ps = 703 Menubar command Pt (Compile menubar).
1192 Ps = 704 Change colour of italic characters to Pt 1322 Ps = 704 Change colour of italic characters to Pt
1193 Ps = 705 Change background pixmap tint colour to Pt (Compile transparency). 1323 Ps = 705 Change background pixmap tint colour to Pt (Compile transparency).
1324 Ps = 706 Change colour of bold characters to Pt
1325 Ps = 707 Change colour of underlined characters to Pt
1194 Ps = 710 Set normal fontset to Pt. Same as Ps = 50. 1326 Ps = 710 Set normal fontset to Pt. Same as Ps = 50.
1195 Ps = 711 Set bold fontset to Pt. Similar to Ps = 50 (Compile styles). 1327 Ps = 711 Set bold fontset to Pt. Similar to Ps = 50 (Compile styles).
1196 Ps = 712 Set italic fontset to Pt. Similar to Ps = 50 (Compile styles). 1328 Ps = 712 Set italic fontset to Pt. Similar to Ps = 50 (Compile styles).
1197 Ps = 713 Set bold-italic fontset to Pt. Similar to Ps = 50 (Compile styles). 1329 Ps = 713 Set bold-italic fontset to Pt. Similar to Ps = 50 (Compile styles).
1198 Ps = 720 Move viewing window up by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills). 1330 Ps = 720 Move viewing window up by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills).
1199 Ps = 721 Move viewing window down by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills). 1331 Ps = 721 Move viewing window down by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills).
1332 Ps = 777 Call the perl extension with the given string, which should be of the form extension:parameters (Compile perl).
1200 1333
1201 1334
1202 1335
1203menuBar 1336menuBar
1204 The exact syntax used is *almost* solidified. In the menus, DON'T try to 1337 The exact syntax used is *almost* solidified. In the menus, DON'T try to
… …
1669 XK_KP_8 8 ESC O x 1802 XK_KP_8 8 ESC O x
1670 XK_KP_9 9 ESC O y 1803 XK_KP_9 9 ESC O y
1671 1804
1672CONFIGURE OPTIONS 1805CONFIGURE OPTIONS
1673 General hint: if you get compile errors, then likely your configuration 1806 General hint: if you get compile errors, then likely your configuration
1674 hasn't been tested well. Either try with --enable-everything or use the 1807 hasn't been tested well. Either try with "--enable-everything" or use
1675 ./reconf script as a base for experiments. ./reconf is used by myself, 1808 the ./reconf script as a base for experiments. ./reconf is used by
1676 so it should generally be a working config. Of course, you should always 1809 myself, so it should generally be a working config. Of course, you
1677 report when a combination doesn't work, so it can be fixed. Marc Lehmann 1810 should always report when a combination doesn't work, so it can be
1678 <rxvt@schmorp.de>. 1811 fixed. Marc Lehmann <rxvt@schmorp.de>.
1812
1813 All
1679 1814
1680 --enable-everything 1815 --enable-everything
1681 Add support for all non-multichoice options listed in "./configure 1816 Add (or remove) support for all non-multichoice options listed in
1682 --help". Note that unlike other enable options this is order 1817 "./configure --help".
1683 dependant. You can specify this and then disable options which this
1684 enables by *following* this with the appropriate commands.
1685 1818
1686 --enable-xft 1819 You can specify this and then disable options you do not like by
1820 *following* this with the appropriate "--disable-..." arguments, or
1821 you can start with a minimal configuration by specifying
1822 "--disable-everything" and than adding just the "--enable-..."
1823 arguments you want.
1824
1825 --enable-xft (default: enabled)
1687 Add support for Xft (anti-aliases, among others) fonts. Xft fonts 1826 Add support for Xft (anti-aliases, among others) fonts. Xft fonts
1688 are slower and require lots of memory, but as long as you don't use 1827 are slower and require lots of memory, but as long as you don't use
1689 them, you don't pay for them. 1828 them, you don't pay for them.
1690 1829
1691 --enable-font-styles 1830 --enable-font-styles (default: on)
1692 Add support for bold, *italic* and *bold italic* font styles. The 1831 Add support for bold, *italic* and *bold italic* font styles. The
1693 fonts can be set manually or automatically. 1832 fonts can be set manually or automatically.
1694 1833
1695 --with-codesets=NAME,... 1834 --with-codesets=NAME,... (default: all)
1696 Compile in support for additional codeset (encoding) groups ("eu", 1835 Compile in support for additional codeset (encoding) groups ("eu",
1697 "vn" are always compiled in, which includes most 8-bit character 1836 "vn" are always compiled in, which includes most 8-bit character
1698 sets). These codeset tables are used for driving X11 core fonts, 1837 sets). These codeset tables are used for driving X11 core fonts,
1699 they are not required for Xft fonts, although having them compiled 1838 they are not required for Xft fonts, although having them compiled
1700 in lets rxvt-unicode choose replacement fonts more intelligently. 1839 in lets rxvt-unicode choose replacement fonts more intelligently.
… …
1707 zh_ext rarely used but very big chinese encodigs 1846 zh_ext rarely used but very big chinese encodigs
1708 jp common japanese encodings 1847 jp common japanese encodings
1709 jp_ext rarely used but big japanese encodings 1848 jp_ext rarely used but big japanese encodings
1710 kr korean encodings 1849 kr korean encodings
1711 1850
1712 --enable-xim 1851 --enable-xim (default: on)
1713 Add support for XIM (X Input Method) protocol. This allows using 1852 Add support for XIM (X Input Method) protocol. This allows using
1714 alternative input methods (e.g. kinput2) and will also correctly set 1853 alternative input methods (e.g. kinput2) and will also correctly set
1715 up the input for people using dead keys or compose keys. 1854 up the input for people using dead keys or compose keys.
1716 1855
1717 --enable-unicode3 1856 --enable-unicode3 (default: off)
1718 Enable direct support for displaying unicode codepoints above 65535 1857 Enable direct support for displaying unicode codepoints above 65535
1719 (the basic multilingual page). This increases storage requirements 1858 (the basic multilingual page). This increases storage requirements
1720 per character from 2 to 4 bytes. X11 fonts do not yet support these 1859 per character from 2 to 4 bytes. X11 fonts do not yet support these
1721 extra characters, but Xft does. 1860 extra characters, but Xft does.
1722 1861
… …
1724 even without this flag, but the number of such characters is limited 1863 even without this flag, but the number of such characters is limited
1725 to a view thousand (shared with combining characters, see next 1864 to a view thousand (shared with combining characters, see next
1726 switch), and right now rxvt-unicode cannot display them 1865 switch), and right now rxvt-unicode cannot display them
1727 (input/output and cut&paste still work, though). 1866 (input/output and cut&paste still work, though).
1728 1867
1729 --enable-combining 1868 --enable-combining (default: on)
1730 Enable automatic composition of combining characters into composite 1869 Enable automatic composition of combining characters into composite
1731 characters. This is required for proper viewing of text where 1870 characters. This is required for proper viewing of text where
1732 accents are encoded as seperate unicode characters. This is done by 1871 accents are encoded as seperate unicode characters. This is done by
1733 using precomposited characters when available or creating new 1872 using precomposited characters when available or creating new
1734 pseudo-characters when no precomposed form exists. 1873 pseudo-characters when no precomposed form exists.
… …
1743 1882
1744 The combining table also contains entries for arabic presentation 1883 The combining table also contains entries for arabic presentation
1745 forms, but these are not currently used. Bug me if you want these to 1884 forms, but these are not currently used. Bug me if you want these to
1746 be used (and tell me how these are to be used...). 1885 be used (and tell me how these are to be used...).
1747 1886
1748 --enable-fallback(=CLASS) 1887 --enable-fallback(=CLASS) (default: Rxvt)
1749 When reading resource settings, also read settings for class CLASS 1888 When reading resource settings, also read settings for class CLASS.
1750 (default: Rxvt). To disable resource fallback use 1889 To disable resource fallback use --disable-fallback.
1751 --disable-fallback.
1752 1890
1753 --with-res-name=NAME 1891 --with-res-name=NAME (default: urxvt)
1754 Use the given name (default: urxvt) as default application name when 1892 Use the given name as default application name when reading
1755 reading resources. Specify --with-res-name=rxvt to replace rxvt. 1893 resources. Specify --with-res-name=rxvt to replace rxvt.
1756 1894
1757 --with-res-class=CLASS 1895 --with-res-class=CLASS /default: URxvt)
1758 Use the given class (default: URxvt) as default application class 1896 Use the given class as default application class when reading
1759 when reading resources. Specify --with-res-class=Rxvt to replace 1897 resources. Specify --with-res-class=Rxvt to replace rxvt.
1760 rxvt.
1761 1898
1762 --enable-utmp 1899 --enable-utmp (default: on)
1763 Write user and tty to utmp file (used by programs like w) at start 1900 Write user and tty to utmp file (used by programs like w) at start
1764 of rxvt execution and delete information when rxvt exits. 1901 of rxvt execution and delete information when rxvt exits.
1765 1902
1766 --enable-wtmp 1903 --enable-wtmp (default: on)
1767 Write user and tty to wtmp file (used by programs like last) at 1904 Write user and tty to wtmp file (used by programs like last) at
1768 start of rxvt execution and write logout when rxvt exits. This 1905 start of rxvt execution and write logout when rxvt exits. This
1769 option requires --enable-utmp to also be specified. 1906 option requires --enable-utmp to also be specified.
1770 1907
1771 --enable-lastlog 1908 --enable-lastlog (default: on)
1772 Write user and tty to lastlog file (used by programs like lastlogin) 1909 Write user and tty to lastlog file (used by programs like lastlogin)
1773 at start of rxvt execution. This option requires --enable-utmp to 1910 at start of rxvt execution. This option requires --enable-utmp to
1774 also be specified. 1911 also be specified.
1775 1912
1776 --enable-xpm-background 1913 --enable-xpm-background (default: on)
1777 Add support for XPM background pixmaps. 1914 Add support for XPM background pixmaps.
1778 1915
1779 --enable-transparency 1916 --enable-transparency (default: on)
1780 Add support for inheriting parent backgrounds thus giving a fake 1917 Add support for inheriting parent backgrounds thus giving a fake
1781 transparency to the term. 1918 transparency to the term.
1782 1919
1783 --enable-fading 1920 --enable-fading (default: on)
1784 Add support for fading the text when focus is lost. 1921 Add support for fading the text when focus is lost (requires
1922 "--enable-transparency").
1785 1923
1786 --enable-tinting 1924 --enable-tinting (default: on)
1787 Add support for tinting of transparent backgrounds. 1925 Add support for tinting of transparent backgrounds (requires
1926 "--enable-transparency").
1788 1927
1789 --enable-menubar 1928 --enable-menubar (default: off) [DEPRECATED]
1790 Add support for our menu bar system (this interacts badly with 1929 Add support for our menu bar system (this interacts badly with
1791 dynamic locale switching currently). 1930 dynamic locale switching currently). This option is DEPRECATED and
1931 will be removed in the future.
1792 1932
1793 --enable-rxvt-scroll 1933 --enable-rxvt-scroll (default: on)
1794 Add support for the original rxvt scrollbar. 1934 Add support for the original rxvt scrollbar.
1795 1935
1796 --enable-next-scroll 1936 --enable-next-scroll (default: on)
1797 Add support for a NeXT-like scrollbar. 1937 Add support for a NeXT-like scrollbar.
1798 1938
1799 --enable-xterm-scroll 1939 --enable-xterm-scroll (default: on)
1800 Add support for an Xterm-like scrollbar. 1940 Add support for an Xterm-like scrollbar.
1801 1941
1802 --enable-plain-scroll 1942 --enable-plain-scroll (default: on)
1803 Add support for a very unobtrusive, plain-looking scrollbar that is 1943 Add support for a very unobtrusive, plain-looking scrollbar that is
1804 the favourite of the rxvt-unicode author, having used it for many 1944 the favourite of the rxvt-unicode author, having used it for many
1805 years. 1945 years.
1806 1946
1807 --enable-half-shadow 1947 --enable-half-shadow (default: off)
1808 Make shadows on the scrollbar only half the normal width & height. 1948 Make shadows on the scrollbar only half the normal width & height.
1809 only applicable to rxvt scrollbars. 1949 only applicable to rxvt scrollbars.
1810 1950
1811 --enable-ttygid 1951 --enable-ttygid (default: off)
1812 Change tty device setting to group "tty" - only use this if your 1952 Change tty device setting to group "tty" - only use this if your
1813 system uses this type of security. 1953 system uses this type of security.
1814 1954
1815 --disable-backspace-key 1955 --disable-backspace-key
1816 Disable any handling of the backspace key by us - let the X server 1956 Removes any handling of the backspace key by us - let the X server
1817 do it. 1957 do it.
1818 1958
1819 --disable-delete-key 1959 --disable-delete-key
1820 Disable any handling of the delete key by us - let the X server do 1960 Removes any handling of the delete key by us - let the X server do
1821 it. 1961 it.
1822 1962
1823 --disable-resources 1963 --disable-resources
1824 Remove all resources checking. 1964 Removes any support for resource checking.
1825 1965
1826 --enable-xgetdefault 1966 --enable-xgetdefault
1827 Make resources checking via XGetDefault() instead of our small 1967 Make resources checking via XGetDefault() instead of our small
1828 version which only checks ~/.Xdefaults, or if that doesn't exist 1968 version which only checks ~/.Xdefaults, or if that doesn't exist
1829 then ~/.Xresources. 1969 then ~/.Xresources.
1830 1970
1831 Please note that nowadays, things like XIM will automatically pull 1971 Please note that nowadays, things like XIM will automatically pull
1832 in and use the full X resource manager, so the overhead of using it 1972 in and use the full X resource manager, so the overhead of using it
1833 might be very small, if nonexistant. 1973 might be very small, if nonexistant.
1834 1974
1835 --enable-strings 1975 --enable-strings (default: off)
1836 Add support for our possibly faster memset() function and other 1976 Add support for our possibly faster memset() function and other
1837 various routines, overriding your system's versions which may have 1977 various routines, overriding your system's versions which may have
1838 been hand-crafted in assembly or may require extra libraries to link 1978 been hand-crafted in assembly or may require extra libraries to link
1839 in. (this breaks ANSI-C rules and has problems on many GNU/Linux 1979 in. (this breaks ANSI-C rules and has problems on many GNU/Linux
1840 systems). 1980 systems).
1841 1981
1842 --disable-swapscreen 1982 --disable-swapscreen
1843 Remove support for swap screen. 1983 Remove support for secondary/swap screen.
1844 1984
1845 --enable-frills 1985 --enable-frills (default: on)
1846 Add support for many small features that are not essential but nice 1986 Add support for many small features that are not essential but nice
1847 to have. Normally you want this, but for very small binaries you may 1987 to have. Normally you want this, but for very small binaries you may
1848 want to disable this. 1988 want to disable this.
1849 1989
1850 A non-exhaustive list of features enabled by "--enable-frills" 1990 A non-exhaustive list of features enabled by "--enable-frills"
1851 (possibly in combination with other switches) is: 1991 (possibly in combination with other switches) is:
1852 1992
1853 MWM-hints 1993 MWM-hints
1854 EWMH-hints (pid, utf8 names) and protocols (ping) 1994 EWMH-hints (pid, utf8 names) and protocols (ping)
1855 seperate underline colour 1995 seperate underline colour (-underlineColor)
1856 settable border widths and borderless switch 1996 settable border widths and borderless switch (-w, -b, -bl)
1857 settable extra linespacing 1997 settable extra linespacing /-lsp)
1858 iso-14755-2 and -3, and visual feedback 1998 iso-14755-2 and -3, and visual feedback
1859 backindex and forwardindex escape sequence 1999 backindex and forwardindex escape sequence
1860 window op and some xterm/OSC escape sequences 2000 window op and some xterm/OSC escape sequences
1861 tripleclickwords 2001 tripleclickwords (-tcw)
1862 settable insecure mode 2002 settable insecure mode (-insecure)
1863 keysym remapping support 2003 keysym remapping support
1864 cursor blinking and underline cursor 2004 cursor blinking and underline cursor (-cb, -uc)
1865 -embed and -pty-fd options 2005 XEmbed support (-embed)
2006 user-pty (-pty-fd)
2007 hold on exit (-hold)
2008 skip builtin block graphics (-sbg)
2009 sgr modes 90..97 and 100..107
1866 2010
1867 --enable-iso14755 2011 --enable-iso14755 (default: on)
1868 Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt). 2012 Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt).
1869 Basic support (section 5.1) is enabled by "--enable-frills", while 2013 Basic support (section 5.1) is enabled by "--enable-frills", while
1870 support for 5.2, 5.3 and 5.4 is enabled with this switch. 2014 support for 5.2, 5.3 and 5.4 is enabled with this switch.
1871 2015
1872 --enable-keepscrolling 2016 --enable-keepscrolling (default: on)
1873 Add support for continual scrolling of the display when you hold the 2017 Add support for continual scrolling of the display when you hold the
1874 mouse button down on a scrollbar arrow. 2018 mouse button down on a scrollbar arrow.
1875 2019
1876 --enable-mousewheel 2020 --enable-mousewheel (default: on)
1877 Add support for scrolling via mouse wheel or buttons 4 & 5. 2021 Add support for scrolling via mouse wheel or buttons 4 & 5.
1878 2022
1879 --enable-slipwheeling 2023 --enable-slipwheeling (default: on)
1880 Add support for continual scrolling (using the mouse wheel as an 2024 Add support for continual scrolling (using the mouse wheel as an
1881 accelerator) while the control key is held down. This option 2025 accelerator) while the control key is held down. This option
1882 requires --enable-mousewheel to also be specified. 2026 requires --enable-mousewheel to also be specified.
1883 2027
1884 --disable-new-selection 2028 --disable-new-selection
1885 Remove support for mouse selection style like that of xterm. 2029 Remove support for mouse selection style like that of xterm.
1886 2030
1887 --enable-dmalloc 2031 --enable-dmalloc (default: off)
1888 Use Gray Watson's malloc - which is good for debugging See 2032 Use Gray Watson's malloc - which is good for debugging See
1889 http://www.letters.com/dmalloc/ for details If you use either this 2033 http://www.letters.com/dmalloc/ for details If you use either this
1890 or the next option, you may need to edit src/Makefile after 2034 or the next option, you may need to edit src/Makefile after
1891 compiling to point DINCLUDE and DLIB to the right places. 2035 compiling to point DINCLUDE and DLIB to the right places.
1892 2036
1893 You can only use either this option and the following (should you 2037 You can only use either this option and the following (should you
1894 use either) . 2038 use either) .
1895 2039
1896 --enable-dlmalloc 2040 --enable-dlmalloc (default: off)
1897 Use Doug Lea's malloc - which is good for a production version See 2041 Use Doug Lea's malloc - which is good for a production version See
1898 <http://g.oswego.edu/dl/html/malloc.html> for details. 2042 <http://g.oswego.edu/dl/html/malloc.html> for details.
1899 2043
1900 --enable-smart-resize 2044 --enable-smart-resize (default: on)
1901 Add smart growth/shrink behaviour when changing font size via from 2045 Add smart growth/shrink behaviour when changing font size via hot
1902 hot keys. This should keep in a fixed position the rxvt corner which 2046 keys. This should keep the window corner which is closest to a
1903 is closest to a corner of the screen. 2047 corner of the screen in a fixed position.
1904 2048
1905 --enable-pointer-blank 2049 --enable-pointer-blank (default: on)
1906 Add support to have the pointer disappear when typing or inactive. 2050 Add support to have the pointer disappear when typing or inactive.
1907 2051
1908 --with-name=NAME 2052 --enable-perl (default: off)
2053 Enable an embedded perl interpreter. See the rxvtperl(3) manpage
2054 (doc/rxvtperl.txt) for more info on this feature, or the files in
2055 src/perl-ext/ for the extensions that are installed by default. The
2056 perl interpreter that is used can be specified via the "PERL"
2057 environment variable when running configure.
2058
2059 --with-name=NAME (default: urxvt)
1909 Set the basename for the installed binaries (default: "urxvt", 2060 Set the basename for the installed binaries, resulting in "urxvt",
1910 resulting in "urxvt", "urxvtd" etc.). Specify "--with-name=rxvt" to 2061 "urxvtd" etc.). Specify "--with-name=rxvt" to replace with "rxvt".
1911 replace with "rxvt".
1912 2062
1913 --with-term=NAME 2063 --with-term=NAME (default: rxvt-unicode)
1914 Change the environmental variable for the terminal to NAME (default 2064 Change the environmental variable for the terminal to NAME.
1915 "rxvt-unicode")
1916 2065
1917 --with-terminfo=PATH 2066 --with-terminfo=PATH
1918 Change the environmental variable for the path to the terminfo tree 2067 Change the environmental variable for the path to the terminfo tree
1919 to PATH. 2068 to PATH.
1920 2069

Diff Legend

– Removed lines
+ Added lines
< Changed lines
> Changed lines