ViewVC Help
View File | Revision Log | Show Annotations | Download File
/cvs/rxvt-unicode/doc/rxvt.7.txt
(Generate patch)

Comparing rxvt-unicode/doc/rxvt.7.txt (file contents):
Revision 1.13 by root, Mon Feb 14 10:44:50 2005 UTC vs.
Revision 1.44 by root, Mon Jan 16 14:48:39 2006 UTC

… …
18 The newest version of this document is also available on the World Wide 18 The newest version of this document is also available on the World Wide
19 Web at 19 Web at
20 <http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>. 20 <http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>.
21 21
22FREQUENTLY ASKED QUESTIONS 22FREQUENTLY ASKED QUESTIONS
23 The new selection selects pieces that are too big, how can I select
24 single words?
25 Yes. For example, if you want to select alphanumeric words, you can
26 use the following resource:
27
28 URxvt.selection.pattern-0: ([[:word:]]+)
29
30 If you click more than twice, the selection will be extended more
31 and more.
32
33 To get a selection that is very similar to the old code, try this
34 pattern:
35
36 URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\\\\]^`{|})]+)
37
38 Please also note that the *LeftClick Shift-LeftClik* combination
39 also selects words like the old code.
40
41 I don't like the new selection/popups/hotkeys/perl, how do I
42 change/disable it?
43 You can disable the perl extension completely by setting the
44 perl-ext-common resource to the empty string, which also keeps
45 rxvt-unicode from initialising perl, saving memory.
46
47 If you only want to disable specific features, you first have to
48 identify which perl extension is responsible. For this, read the
49 section PREPACKAGED EXTENSIONS in the rxvtperl(3) manpage. For
50 example, to disable the selection-popup and option-popup, specify
51 this perl-ext-common resource:
52
53 URxvt.perl-ext-common: default,-selection-popup,-option-popup
54
55 This will keep the default extensions, but disable the two popup
56 extensions. Some extensions can also be configured, for example,
57 scrollback search mode is triggered by M-s. You can move it to any
58 other combination either by setting the searchable-scrollback
59 resource:
60
61 URxvt.searchable-scrollback: CM-s
62
63 Isn't rxvt supposed to be small? Don't all those features bloat?
64 I often get asked about this, and I think, no, they didn't cause
65 extra bloat. If you compare a minimal rxvt and a minimal urxvt, you
66 can see that the urxvt binary is larger (due to some encoding tables
67 always being compiled in), but it actually uses less memory (RSS)
68 after startup. Even with "--disable-everything", this comparison is
69 a bit unfair, as many features unique to urxvt (locale, encoding
70 conversion, iso14755 etc.) are already in use in this mode.
71
72 text data bss drs rss filename
73 98398 1664 24 15695 1824 rxvt --disable-everything
74 188985 9048 66616 18222 1788 urxvt --disable-everything
75
76 When you "--enable-everything" (which _is_ unfair, as this involves
77 xft and full locale/XIM support which are quite bloaty inside libX11
78 and my libc), the two diverge, but not unreasnobaly so.
79
80 text data bss drs rss filename
81 163431 2152 24 20123 2060 rxvt --enable-everything
82 1035683 49680 66648 29096 3680 urxvt --enable-everything
83
84 The very large size of the text section is explained by the
85 east-asian encoding tables, which, if unused, take up disk space but
86 nothing else and can be compiled out unless you rely on X11 core
87 fonts that use those encodings. The BSS size comes from the 64k
88 emergency buffer that my c++ compiler allocates (but of course
89 doesn't use unless you are out of memory). Also, using an xft font
90 instead of a core font immediately adds a few megabytes of RSS. Xft
91 indeed is responsible for a lot of RSS even when not used.
92
93 Of course, due to every character using two or four bytes instead of
94 one, a large scrollback buffer will ultimately make rxvt-unicode use
95 more memory.
96
97 Compared to e.g. Eterm (5112k), aterm (3132k) and xterm (4680k),
98 this still fares rather well. And compared to some monsters like
99 gnome-terminal (21152k + extra 4204k in separate processes) or
100 konsole (22200k + extra 43180k in daemons that stay around after
101 exit, plus half a minute of startup time, including the hundreds of
102 warnings it spits out), it fares extremely well *g*.
103
104 Why C++, isn't that unportable/bloated/uncool?
105 Is this a question? :) It comes up very often. The simple answer is:
106 I had to write it, and C++ allowed me to write and maintain it in a
107 fraction of the time and effort (which is a scarce resource for me).
108 Put even shorter: It simply wouldn't exist without C++.
109
110 My personal stance on this is that C++ is less portable than C, but
111 in the case of rxvt-unicode this hardly matters, as its portability
112 limits are defined by things like X11, pseudo terminals, locale
113 support and unix domain sockets, which are all less portable than
114 C++ itself.
115
116 Regarding the bloat, see the above question: It's easy to write
117 programs in C that use gobs of memory, an certainly possible to
118 write programs in C++ that don't. C++ also often comes with large
119 libraries, but this is not necessarily the case with GCC. Here is
120 what rxvt links against on my system with a minimal config:
121
122 libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
123 libc.so.6 => /lib/libc.so.6 (0x00002aaaaadde000)
124 libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab01d000)
125 /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
126
127 And here is rxvt-unicode:
128
129 libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000)
130 libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000)
131 libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000)
132 libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000)
133 /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000)
134
135 No large bloated libraries (of course, none were linked in
136 statically), except maybe libX11 :)
137
138 Does it support tabs, can I have a tabbed rxvt-unicode?
139 rxvt-unicode does not directly support tabs. It will work fine with
140 tabbing functionality of many window managers or similar tabbing
141 programs, and its embedding-features allow it to be embedded into
142 other programs, as witnessed by doc/rxvt-tabbed or the upcoming
143 "Gtk2::URxvt" perl module, which features a tabbed urxvt (murxvt)
144 terminal as an example embedding application.
145
23 How do I know which rxvt-unicode version I'm using? 146 How do I know which rxvt-unicode version I'm using?
24 The version number is displayed with the usage (-h). Also the escape 147 The version number is displayed with the usage (-h). Also the escape
25 sequence "ESC [ 8 n" sets the window title to the version number. 148 sequence "ESC [ 8 n" sets the window title to the version number.
149 When using the rxvtc client, the version displayed is that of the
150 daemon.
26 151
27 I am using Debian GNU/Linux and have a problem... 152 I am using Debian GNU/Linux and have a problem...
28 The Debian GNU/Linux package of rxvt-unicode contains large patches 153 The Debian GNU/Linux package of rxvt-unicode in sarge contains large
29 that considerably change the behaviour of rxvt-unicode. Before 154 patches that considerably change the behaviour of rxvt-unicode.
30 reporting a bug to the original rxvt-unicode author please download 155 Before reporting a bug to the original rxvt-unicode author please
31 and install the genuine version 156 download and install the genuine version
32 (<http://software.schmorp.de#rxvt-unicode>) and try to reproduce the 157 (<http://software.schmorp.de#rxvt-unicode>) and try to reproduce the
33 problem. If you cannot, chances are that the problems are specific 158 problem. If you cannot, chances are that the problems are specific
34 to Debian GNU/Linux, in which case it should be reported via the 159 to Debian GNU/Linux, in which case it should be reported via the
35 Debian Bug Tracking System (use "reportbug" to report the bug). 160 Debian Bug Tracking System (use "reportbug" to report the bug).
36 161
37 For other problems that also affect the Debian package, you can and 162 For other problems that also affect the Debian package, you can and
38 probably should use the Debian BTS, too, because, after all, it's 163 probably should use the Debian BTS, too, because, after all, it's
39 also a bug in the Debian version and it serves as a reminder for 164 also a bug in the Debian version and it serves as a reminder for
40 other users that might encounter the same issue. 165 other users that might encounter the same issue.
166
167 I am maintaining rxvt-unicode for distribution/OS XXX, any
168 recommendation?
169 You should build one binary with the default options. configure now
170 enables most useful options, and the trend goes to making them
171 runtime-switchable, too, so there is usually no drawback to enbaling
172 them, except higher disk and possibly memory usage. The perl
173 interpreter should be enabled, as important functionality (menus,
174 selection, likely more in the future) depends on it.
175
176 You should not overwrite the "perl-ext-common" snd "perl-ext"
177 resources system-wide (except maybe with "defaults"). This will
178 result in useful behaviour. If your distribution aims at low memory,
179 add an empty "perl-ext-common" resource to the app-defaults file.
180 This will keep the perl interpreter disabled until the user enables
181 it.
182
183 If you can/want build more binaries, I recommend building a minimal
184 one with "--disable-everything" (very useful) and a maximal one with
185 "--enable-everything" (less useful, it will be very big due to a lot
186 of encodings built-in that increase download times and are rarely
187 used).
188
189 I need to make it setuid/setgid to support utmp/ptys on my OS, is this
190 safe?
191 Likely not. While I honestly try to make it secure, and am probably
192 not bad at it, I think it is simply unreasonable to expect all of
193 freetype + fontconfig + xft + xlib + perl + ... + rxvt-unicode
194 itself to all be secure. Also, rxvt-unicode disables some options
195 when it detects that it runs setuid or setgid, which is not nice.
196 Besides, with the embedded perl interpreter the possibility for
197 security problems easily multiplies.
198
199 Elevated privileges are only required for utmp and pty operations on
200 some systems (for example, GNU/Linux doesn't need any extra
201 privileges for ptys, but some need it for utmp support). It is
202 planned to mvoe this into a forked handler process, but this is not
203 yet done.
204
205 So, while setuid/setgid operation is supported and not a problem on
206 your typical single-user-no-other-logins unix desktop, always
207 remember that its an awful lot of code, most of which isn't checked
208 for security issues regularly.
41 209
42 When I log-in to another system it tells me about missing terminfo data? 210 When I log-in to another system it tells me about missing terminfo data?
43 The terminal description used by rxvt-unicode is not as widely 211 The terminal description used by rxvt-unicode is not as widely
44 available as that for xterm, or even rxvt (for which the same 212 available as that for xterm, or even rxvt (for which the same
45 problem often arises). 213 problem often arises).
… …
66 URxvt.termName: rxvt 234 URxvt.termName: rxvt
67 235
68 If you don't plan to use rxvt (quite common...) you could also 236 If you don't plan to use rxvt (quite common...) you could also
69 replace the rxvt terminfo file with the rxvt-unicode one. 237 replace the rxvt terminfo file with the rxvt-unicode one.
70 238
239 "tic" outputs some error when compiling the terminfo entry.
240 Most likely it's the empty definition for "enacs=". Just replace it
241 by "enacs=\E[0@" and try again.
242
71 "bash"'s readline does not work correctly under rxvt. 243 "bash"'s readline does not work correctly under rxvt.
72 I need a termcap file entry. 244 I need a termcap file entry.
73 One reason you might want this is that some distributions or 245 One reason you might want this is that some distributions or
74 operating systems still compile some programs using the 246 operating systems still compile some programs using the
75 long-obsoleted termcap (Fedora Core's bash is one example) and rely 247 long-obsoleted termcap library (Fedora Core's bash is one example)
76 on a termcap entry for "rxvt-unicode". 248 and rely on a termcap entry for "rxvt-unicode".
77 249
78 You could use rxvt's termcap entry with resonable results in many 250 You could use rxvt's termcap entry with resonable results in many
79 cases. You can also create a termcap entry by using terminfo's 251 cases. You can also create a termcap entry by using terminfo's
80 infocmp program like this: 252 infocmp program like this:
81 253
… …
83 255
84 Or you could use this termcap entry, generated by the command above: 256 Or you could use this termcap entry, generated by the command above:
85 257
86 rxvt-unicode|rxvt-unicode terminal (X Window System):\ 258 rxvt-unicode|rxvt-unicode terminal (X Window System):\
87 :am:bw:eo:km:mi:ms:xn:xo:\ 259 :am:bw:eo:km:mi:ms:xn:xo:\
88 :co#80:it#8:li#24:\ 260 :co#80:it#8:li#24:lm#0:\
89 :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ 261 :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
90 :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\ 262 :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\
91 :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:al=\E[L:\ 263 :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=\E(B:al=\E[L:\
92 :as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\ 264 :as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\
93 :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\ 265 :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\
94 :ec=\E[%dX:ei=\E[4l:ho=\E[H:i1=\E[?47l\E=\E[?1l:ic=\E[@:\ 266 :dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:\
267 :i1=\E[?47l\E=\E[?1l:ic=\E[@:im=\E[4h:\
95 :im=\E[4h:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\ 268 :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\
96 :k0=\E[21~:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\ 269 :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\
97 :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\ 270 :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\
98 :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:\ 271 :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\
99 :ke=\E[?1l\E>:kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\ 272 :kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\
100 :ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:\ 273 :mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:rc=\E8:\
101 :nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:\ 274 :sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\
102 :st=\EH:ta=^I:te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:\ 275 :te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:\
103 :up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\ 276 :us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\
104 :vs=\E[?25h: 277 :vs=\E[?25h:
105 278
106 Why does "ls" no longer have coloured output? 279 Why does "ls" no longer have coloured output?
107 The "ls" in the GNU coreutils unfortunately doesn't use terminfo to 280 The "ls" in the GNU coreutils unfortunately doesn't use terminfo to
108 decide wether a terminal has colour, but uses it's own configuration 281 decide wether a terminal has colour, but uses it's own configuration
… …
246 that doesn't work, you might be forced to use a different font. 419 that doesn't work, you might be forced to use a different font.
247 420
248 All of this is not a problem when using X11 core fonts, as their 421 All of this is not a problem when using X11 core fonts, as their
249 bounding box data is correct. 422 bounding box data is correct.
250 423
424 On Solaris 9, many line-drawing characters are too wide.
425 Seems to be a known bug, read
426 <http://nixdoc.net/files/forum/about34198.html>. Some people use the
427 following ugly workaround to get non-double-wide-characters working:
428
429 #define wcwidth(x) wcwidth(x) > 1 ? 1 : wcwidth(x)
430
251 My Compose (Multi_key) key is no longer working. 431 My Compose (Multi_key) key is no longer working.
252 The most common causes for this are that either your locale is not 432 The most common causes for this are that either your locale is not
253 set correctly, or you specified a preeditStyle that is not supported 433 set correctly, or you specified a preeditStyle that is not supported
254 by your input method. For example, if you specified OverTheSpot and 434 by your input method. For example, if you specified OverTheSpot and
255 your input method (e.g. the default input method handling Compose 435 your input method (e.g. the default input method handling Compose
… …
299 As you might have guessed, FreeBSD does neither define this symobl 479 As you might have guessed, FreeBSD does neither define this symobl
300 nor does it support it. Instead, it uses it's own internal 480 nor does it support it. Instead, it uses it's own internal
301 representation of wchar_t. This is, of course, completely fine with 481 representation of wchar_t. This is, of course, completely fine with
302 respect to standards. 482 respect to standards.
303 483
484 However, that means rxvt-unicode only works in "POSIX", "ISO-8859-1"
485 and "UTF-8" locales under FreeBSD (which all use Unicode as wchar_t.
486
304 However, "__STDC_ISO_10646__" is the only sane way to support 487 "__STDC_ISO_10646__" is the only sane way to support multi-language
305 multi-language apps in an OS, as using a locale-dependent (and 488 apps in an OS, as using a locale-dependent (and non-standardized)
306 non-standardized) representation of wchar_t makes it impossible to 489 representation of wchar_t makes it impossible to convert between
307 convert between wchar_t (as used by X11 and your applications) and 490 wchar_t (as used by X11 and your applications) and any other
308 any other encoding without implementing OS-specific-wrappers for 491 encoding without implementing OS-specific-wrappers for each and
309 each and every locale. There simply are no APIs to convert wchar_t 492 every locale. There simply are no APIs to convert wchar_t into
310 into anything except the current locale encoding. 493 anything except the current locale encoding.
311 494
312 Some applications (such as the formidable mlterm) work around this 495 Some applications (such as the formidable mlterm) work around this
313 by carrying their own replacement functions for character set 496 by carrying their own replacement functions for character set
314 handling with them, and either implementing OS-dependent hacks or 497 handling with them, and either implementing OS-dependent hacks or
315 doing multiple conversions (which is slow and unreliable in case the 498 doing multiple conversions (which is slow and unreliable in case the
… …
317 emulator). 500 emulator).
318 501
319 The rxvt-unicode author insists that the right way to fix this is in 502 The rxvt-unicode author insists that the right way to fix this is in
320 the system libraries once and for all, instead of forcing every app 503 the system libraries once and for all, instead of forcing every app
321 to carry complete replacements for them :) 504 to carry complete replacements for them :)
505
506 I use Solaris 9 and it doesn't compile/work/etc.
507 Try the diff in doc/solaris9.patch as a base. It fixes the worst
508 problems with "wcwidth" and a compile problem.
509
510 How can I use rxvt-unicode under cygwin?
511 rxvt-unicode should compile and run out of the box on cygwin, using
512 the X11 libraries that come with cygwin. libW11 emulation is no
513 longer supported (and makes no sense, either, as it only supported a
514 single font). I recommend starting the X-server in "-multiwindow" or
515 "-rootless" mode instead, which will result in similar look&feel as
516 the old libW11 emulation.
517
518 At the time of this writing, cygwin didn't seem to support any
519 multi-byte encodings (you might try "LC_CTYPE=C-UTF-8"), so you are
520 likely limited to 8-bit encodings.
322 521
323 How does rxvt-unicode determine the encoding to use? 522 How does rxvt-unicode determine the encoding to use?
324 Is there an option to switch encodings? 523 Is there an option to switch encodings?
325 Unlike some other terminals, rxvt-unicode has no encoding switch, 524 Unlike some other terminals, rxvt-unicode has no encoding switch,
326 and no specific "utf-8" mode, such as xterm. In fact, it doesn't 525 and no specific "utf-8" mode, such as xterm. In fact, it doesn't
… …
438 it gets worse, as rxvt-unicode then uses 8 bytes per screen cell. 637 it gets worse, as rxvt-unicode then uses 8 bytes per screen cell.
439 638
440 Can I speed up Xft rendering somehow? 639 Can I speed up Xft rendering somehow?
441 Yes, the most obvious way to speed it up is to avoid Xft entirely, 640 Yes, the most obvious way to speed it up is to avoid Xft entirely,
442 as it is simply slow. If you still want Xft fonts you might try to 641 as it is simply slow. If you still want Xft fonts you might try to
443 disable antialiasing (by appending ":antialiasing=false"), which 642 disable antialiasing (by appending ":antialias=false"), which saves
444 saves lots of memory and also speeds up rendering considerably. 643 lots of memory and also speeds up rendering considerably.
445 644
446 Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong? 645 Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong?
447 Rxvt-unicode will use whatever you specify as a font. If it needs to 646 Rxvt-unicode will use whatever you specify as a font. If it needs to
448 fall back to it's default font search list it will prefer X11 core 647 fall back to it's default font search list it will prefer X11 core
449 fonts, because they are small and fast, and then use Xft fonts. It 648 fonts, because they are small and fast, and then use Xft fonts. It
… …
455 Mouse cut/paste suddenly no longer works. 654 Mouse cut/paste suddenly no longer works.
456 Make sure that mouse reporting is actually turned off since killing 655 Make sure that mouse reporting is actually turned off since killing
457 some editors prematurely may leave the mouse in mouse report mode. 656 some editors prematurely may leave the mouse in mouse report mode.
458 I've heard that tcsh may use mouse reporting unless it otherwise 657 I've heard that tcsh may use mouse reporting unless it otherwise
459 specified. A quick check is to see if cut/paste works when the Alt 658 specified. A quick check is to see if cut/paste works when the Alt
460 or Shift keys are depressed. See rxvt(7) 659 or Shift keys are depressed.
461 660
462 What's with this bold/blink stuff? 661 What's with this bold/blink stuff?
463 If no bold colour is set via "colorBD:", bold will invert text using 662 If no bold colour is set via "colorBD:", bold will invert text using
464 the standard foreground colour. 663 the standard foreground colour.
465 664
… …
521 URxvt.color14: #73f7ff 720 URxvt.color14: #73f7ff
522 URxvt.color7: #e1dddd 721 URxvt.color7: #e1dddd
523 URxvt.color15: #e1dddd 722 URxvt.color15: #e1dddd
524 723
525 How can I start rxvtd in a race-free way? 724 How can I start rxvtd in a race-free way?
526 Despite it's name, rxvtd is not a real daemon, but more like a 725 Try "rxvtd -f -o", which tells rxvtd to open the display, create the
527 server that answers rxvtc's requests, so it doesn't background 726 listening socket and then fork.
528 itself.
529
530 To ensure rxvtd is listening on it's socket, you can use the
531 following method to wait for the startup message before continuing:
532
533 { rxvtd & } | read
534 727
535 What's with the strange Backspace/Delete key behaviour? 728 What's with the strange Backspace/Delete key behaviour?
536 Assuming that the physical Backspace key corresponds to the 729 Assuming that the physical Backspace key corresponds to the
537 BackSpace keysym (not likely for Linux ... see the following 730 BackSpace keysym (not likely for Linux ... see the following
538 question) there are two standard values that can be used for 731 question) there are two standard values that can be used for
… …
557 750
558 # use Backspace = ^? 751 # use Backspace = ^?
559 $ stty erase ^? 752 $ stty erase ^?
560 $ rxvt 753 $ rxvt
561 754
562 Toggle with "ESC [ 36 h" / "ESC [ 36 l" as documented in rxvt(7). 755 Toggle with "ESC [ 36 h" / "ESC [ 36 l".
563 756
564 For an existing rxvt-unicode: 757 For an existing rxvt-unicode:
565 758
566 # use Backspace = ^H 759 # use Backspace = ^H
567 $ stty erase ^H 760 $ stty erase ^H
… …
1059 1252
1060 "Ps = 9" X10 XTerm 1253 "Ps = 9" X10 XTerm
1061 h Send Mouse X & Y on button press. 1254 h Send Mouse X & Y on button press.
1062 l No mouse reporting. 1255 l No mouse reporting.
1063 1256
1064 "Ps = 10" (rxvt)
1065 h menuBar visible
1066 l menuBar invisible
1067
1068 "Ps = 25" 1257 "Ps = 25"
1069 h Visible cursor {cnorm/cvvis} 1258 h Visible cursor {cnorm/cvvis}
1070 l Invisible cursor {civis} 1259 l Invisible cursor {civis}
1071 1260
1072 "Ps = 30" 1261 "Ps = 30"
… …
1120 l Scroll to bottom on TTY output 1309 l Scroll to bottom on TTY output
1121 1310
1122 "Ps = 1011" (rxvt) 1311 "Ps = 1011" (rxvt)
1123 h Scroll to bottom when a key is pressed 1312 h Scroll to bottom when a key is pressed
1124 l Don't scroll to bottom when a key is pressed 1313 l Don't scroll to bottom when a key is pressed
1314
1315 "Ps = 1021" (rxvt)
1316 h Bold/italic implies high intensity (see option -is)
1317 l Font styles have no effect on intensity (Compile styles)
1125 1318
1126 "Ps = 1047" 1319 "Ps = 1047"
1127 h Use Alternate Screen Buffer 1320 h Use Alternate Screen Buffer
1128 l Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it 1321 l Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it
1129 1322
… …
1152 Ps = 10 Change colour of text foreground to Pt (NB: may change in future) 1345 Ps = 10 Change colour of text foreground to Pt (NB: may change in future)
1153 Ps = 11 Change colour of text background to Pt (NB: may change in future) 1346 Ps = 11 Change colour of text background to Pt (NB: may change in future)
1154 Ps = 12 Change colour of text cursor foreground to Pt 1347 Ps = 12 Change colour of text cursor foreground to Pt
1155 Ps = 13 Change colour of mouse foreground to Pt 1348 Ps = 13 Change colour of mouse foreground to Pt
1156 Ps = 17 Change colour of highlight characters to Pt 1349 Ps = 17 Change colour of highlight characters to Pt
1157 Ps = 18 Change colour of bold characters to Pt 1350 Ps = 18 Change colour of bold characters to Pt [deprecated, see 706]
1158 Ps = 19 Change colour of underlined characters to Pt 1351 Ps = 19 Change colour of underlined characters to Pt [deprecated, see 707]
1159 Ps = 20 Change default background to Pt 1352 Ps = 20 Change default background to Pt
1160 Ps = 39 Change default foreground colour to Pt rxvt compile-time option 1353 Ps = 39 Change default foreground colour to Pt.
1161 Ps = 46 Change Log File to Pt unimplemented 1354 Ps = 46 Change Log File to Pt unimplemented
1162 Ps = 49 Change default background colour to Pt rxvt compile-time option 1355 Ps = 49 Change default background colour to Pt.
1163 Ps = 50 Set fontset to Pt, with the following special values of Pt (rxvt) #+n change up n #-n change down n if n is missing of 0, a value of 1 is used empty change to font0 n change to font n 1356 Ps = 50 Set fontset to Pt, with the following special values of Pt (rxvt) #+n change up n #-n change down n if n is missing of 0, a value of 1 is used empty change to font0 n change to font n
1164 Ps = 55 Log all scrollback buffer and all of screen to Pt 1357 Ps = 55 Log all scrollback buffer and all of screen to Pt
1165 Ps = 701 Change current locale to Pt, or, if Pt is ?, return the current locale (rxvt extension) 1358 Ps = 701 Change current locale to Pt, or, if Pt is ?, return the current locale (Compile frills).
1166 Ps = 703 Menubar command Pt rxvt compile-time option (rxvt-unicode extension)
1167 Ps = 704 Change colour of italic characters to Pt 1359 Ps = 704 Change colour of italic characters to Pt
1168 Ps = 705 Change background pixmap tint colour to Pt 1360 Ps = 705 Change background pixmap tint colour to Pt (Compile transparency).
1361 Ps = 706 Change colour of bold characters to Pt
1362 Ps = 707 Change colour of underlined characters to Pt
1169 Ps = 710 Set normal fontset to Pt. Same as Ps = 50. 1363 Ps = 710 Set normal fontset to Pt. Same as Ps = 50.
1170 Ps = 711 Set bold fontset to Pt. Similar to Ps = 50. 1364 Ps = 711 Set bold fontset to Pt. Similar to Ps = 50 (Compile styles).
1171 Ps = 712 Set italic fontset to Pt. Similar to Ps = 50. 1365 Ps = 712 Set italic fontset to Pt. Similar to Ps = 50 (Compile styles).
1172 Ps = 713 Set bold-italic fontset to Pt. Similar to Ps = 50. 1366 Ps = 713 Set bold-italic fontset to Pt. Similar to Ps = 50 (Compile styles).
1367 Ps = 720 Move viewing window up by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills).
1368 Ps = 721 Move viewing window down by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills).
1369 Ps = 777 Call the perl extension with the given string, which should be of the form extension:parameters (Compile perl).
1173 1370
1174 1371
1175
1176menuBar
1177 The exact syntax used is *almost* solidified. In the menus, DON'T try to
1178 use menuBar commands that add or remove a menuBar.
1179
1180 Note that in all of the commands, the */path/* *cannot* be omitted: use
1181 ./ to specify a menu relative to the current menu.
1182
1183 Overview of menuBar operation
1184 For the menuBar XTerm escape sequence "ESC ] 703 ; Pt ST", the syntax of
1185 "Pt" can be used for a variety of tasks:
1186
1187 At the top level is the current menuBar which is a member of a circular
1188 linked-list of other such menuBars.
1189
1190 The menuBar acts as a parent for the various drop-down menus, which in
1191 turn, may have labels, separator lines, menuItems and subMenus.
1192
1193 The menuItems are the useful bits: you can use them to mimic keyboard
1194 input or even to send text or escape sequences back to rxvt.
1195
1196 The menuBar syntax is intended to provide a simple yet robust method of
1197 constructing and manipulating menus and navigating through the menuBars.
1198
1199 The first step is to use the tag [menu:*name*] which creates the menuBar
1200 called *name* and allows access. You may now or menus, subMenus, and
1201 menuItems. Finally, use the tag [done] to set the menuBar access as
1202 readonly to prevent accidental corruption of the menus. To re-access the
1203 current menuBar for alterations, use the tag [menu], make the
1204 alterations and then use [done]
1205
1206
1207
1208 Commands
1209 [menu:+*name*]
1210 access the named menuBar for creation or alteration. If a new
1211 menuBar is created, it is called *name* (max of 15 chars) and the
1212 current menuBar is pushed onto the stack
1213
1214 [menu]
1215 access the current menuBar for alteration
1216
1217 [title:+*string*]
1218 set the current menuBar's title to *string*, which may contain the
1219 following format specifiers:
1220
1221 B<%n> rxvt name (as per the B<-name> command-line option)
1222 B<%v> rxvt version
1223 B<%%> literal B<%> character
1224
1225 [done]
1226 set menuBar access as readonly. End-of-file tag for [read:+*file*]
1227 operations.
1228
1229 [read:+*file*]
1230 read menu commands directly from *file* (extension ".menu" will be
1231 appended if required.) Start reading at a line with [menu] or
1232 [menu:+*name* and continuing until [done] is encountered.
1233
1234 Blank and comment lines (starting with #) are ignored. Actually,
1235 since any invalid menu commands are also ignored, almost anything
1236 could be construed as a comment line, but this may be tightened up
1237 in the future ... so don't count on it!.
1238
1239 [read:+*file*;+*name*]
1240 The same as [read:+*file*], but start reading at a line with
1241 [menu:+*name*] and continuing until [done:+*name*] or [done] is
1242 encountered.
1243
1244 [dump]
1245 dump all menuBars to the file /tmp/rxvt-PID in a format suitable for
1246 later rereading.
1247
1248 [rm:name]
1249 remove the named menuBar
1250
1251 [rm] [rm:]
1252 remove the current menuBar
1253
1254 [rm*] [rm:*]
1255 remove all menuBars
1256
1257 [swap]
1258 swap the top two menuBars
1259
1260 [prev]
1261 access the previous menuBar
1262
1263 [next]
1264 access the next menuBar
1265
1266 [show]
1267 Enable display of the menuBar
1268
1269 [hide]
1270 Disable display of the menuBar
1271
1272 [pixmap:+*name*]
1273 [pixmap:+*name*;*scaling*]
1274 (set the background pixmap globally
1275
1276 A Future implementation *may* make this local to the menubar)
1277
1278 [:+*command*:]
1279 ignore the menu readonly status and issue a *command* to or a menu
1280 or menuitem or change the ; a useful shortcut for setting the quick
1281 arrows from a menuBar.
1282
1283
1284
1285 Adding and accessing menus
1286 The following commands may also be + prefixed.
1287
1288 /+ access menuBar top level
1289
1290 ./+ access current menu level
1291
1292 ../+
1293 access parent menu (1 level up)
1294
1295 ../../
1296 access parent menu (multiple levels up)
1297
1298 */path/*menu
1299 add/access menu
1300
1301 */path/*menu/*
1302 add/access menu and clear it if it exists
1303
1304 */path/*{-}
1305 add separator
1306
1307 */path/*{item}
1308 add item as a label
1309
1310 */path/*{item} action
1311 add/alter *menuitem* with an associated *action*
1312
1313 */path/*{item}{right-text}
1314 add/alter *menuitem* with right-text as the right-justified text and
1315 as the associated *action*
1316
1317 */path/*{item}{rtext} action
1318 add/alter *menuitem* with an associated *action* and with rtext as
1319 the right-justified text.
1320
1321 Special characters in *action* must be backslash-escaped:
1322 \a \b \E \e \n \r \t \octal
1323
1324 or in control-character notation:
1325 ^@, ^A .. ^Z .. ^_, ^?
1326
1327 To send a string starting with a NUL (^@) character to the program,
1328 start *action* with a pair of NUL characters (^@^@), the first of which
1329 will be stripped off and the balance directed to the program. Otherwise
1330 if *action* begins with NUL followed by non-+NUL characters, the leading
1331 NUL is stripped off and the balance is sent back to rxvt.
1332
1333 As a convenience for the many Emacs-type editors, *action* may start
1334 with M- (eg, M-$ is equivalent to \E$) and a CR will be appended if
1335 missed from M-x commands.
1336
1337 As a convenience for issuing XTerm ESC ] sequences from a menubar (or
1338 quick arrow), a BEL (^G) will be appended if needed.
1339
1340 For example,
1341 M-xapropos is equivalent to \Exapropos\r
1342
1343 and \E]703;mona;100 is equivalent to \E]703;mona;100\a
1344
1345 The option {*right-rtext*} will be right-justified. In the absence of a
1346 specified action, this text will be used as the *action* as well.
1347
1348 For example,
1349 /File/{Open}{^X^F} is equivalent to /File/{Open}{^X^F} ^X^F
1350
1351 The left label *is* necessary, since it's used for matching, but
1352 implicitly hiding the left label (by using same name for both left and
1353 right labels), or explicitly hiding the left label (by preceeding it
1354 with a dot), makes it possible to have right-justified text only.
1355
1356 For example,
1357 /File/{Open}{Open} Open-File-Action
1358
1359 or hiding it
1360 /File/{.anylabel}{Open} Open-File-Action
1361
1362
1363
1364 Removing menus
1365 -/*+
1366 remove all menus from the menuBar, the same as [clear]
1367
1368 -+*/path*menu+
1369 remove menu
1370
1371 -+*/path*{item}+
1372 remove item
1373
1374 -+*/path*{-}
1375 remove separator)
1376
1377 -/path/menu/*
1378 remove all items, separators and submenus from menu
1379
1380
1381
1382 Quick Arrows
1383 The menus also provide a hook for *quick arrows* to provide easier user
1384 access. If nothing has been explicitly set, the default is to emulate
1385 the curror keys. The syntax permits each arrow to be altered
1386 individually or all four at once without re-entering their common
1387 beginning/end text. For example, to explicitly associate cursor actions
1388 with the arrows, any of the following forms could be used:
1389
1390 <r>+*Right*
1391 <l>+*Left*
1392 <u>+*Up*
1393 <d>+*Down*
1394 Define actions for the respective arrow buttons
1395
1396 <b>+*Begin*
1397 <e>+*End*
1398 Define common beginning/end parts for *quick arrows* which used in
1399 conjunction with the above <r> <l> <u> <d> constructs
1400
1401 For example, define arrows individually,
1402 <u>\E[A
1403
1404 <d>\E[B
1405
1406 <r>\E[C
1407
1408 <l>\E[D
1409
1410 or all at once
1411 <u>\E[AZ<><d>\E[BZ<><r>\E[CZ<><l>\E[D
1412
1413 or more compactly (factoring out common parts)
1414 <b>\E[<u>AZ<><d>BZ<><r>CZ<><l>D
1415
1416
1417
1418 Command Summary
1419 A short summary of the most *common* commands:
1420
1421 [menu:name]
1422 use an existing named menuBar or start a new one
1423
1424 [menu]
1425 use the current menuBar
1426
1427 [title:string]
1428 set menuBar title
1429
1430 [done]
1431 set menu access to readonly and, if reading from a file, signal EOF
1432
1433 [done:name]
1434 if reading from a file using [read:file;name] signal EOF
1435
1436 [rm:name]
1437 remove named menuBar(s)
1438
1439 [rm] [rm:]
1440 remove current menuBar
1441
1442 [rm*] [rm:*]
1443 remove all menuBar(s)
1444
1445 [swap]
1446 swap top two menuBars
1447
1448 [prev]
1449 access the previous menuBar
1450
1451 [next]
1452 access the next menuBar
1453
1454 [show]
1455 map menuBar
1456
1457 [hide]
1458 unmap menuBar
1459
1460 [pixmap;file]
1461 [pixmap;file;scaling]
1462 set a background pixmap
1463
1464 [read:file]
1465 [read:file;name]
1466 read in a menu from a file
1467
1468 [dump]
1469 dump out all menuBars to /tmp/rxvt-PID
1470
1471 / access menuBar top level
1472
1473 ./
1474 ../
1475 ../../
1476 access current or parent menu level
1477
1478 /path/menu
1479 add/access menu
1480
1481 /path/{-}
1482 add separator
1483
1484 /path/{item}{rtext} action
1485 add/alter menu item
1486
1487 -/* remove all menus from the menuBar
1488
1489 -/path/menu
1490 remove menu items, separators and submenus from menu
1491
1492 -/path/menu
1493 remove menu
1494
1495 -/path/{item}
1496 remove item
1497
1498 -/path/{-}
1499 remove separator
1500
1501 <b>Begin<r>Right<l>Left<u>Up<d>Down<e>End
1502 menu quick arrows
1503 1372
1504XPM 1373XPM
1505 For the XPM XTerm escape sequence "ESC ] 20 ; Pt ST" then value of "Pt" 1374 For the XPM XTerm escape sequence "ESC ] 20 ; Pt ST" then value of "Pt"
1506 can be the name of the background pixmap followed by a sequence of 1375 can be the name of the background pixmap followed by a sequence of
1507 scaling/positioning commands separated by semi-colons. The 1376 scaling/positioning commands separated by semi-colons. The
… …
1642 XK_KP_8 8 ESC O x 1511 XK_KP_8 8 ESC O x
1643 XK_KP_9 9 ESC O y 1512 XK_KP_9 9 ESC O y
1644 1513
1645CONFIGURE OPTIONS 1514CONFIGURE OPTIONS
1646 General hint: if you get compile errors, then likely your configuration 1515 General hint: if you get compile errors, then likely your configuration
1647 hasn't been tested well. Either try with --enable-everything or use the 1516 hasn't been tested well. Either try with "--enable-everything" or use
1648 ./reconf script as a base for experiments. ./reconf is used by myself, 1517 the ./reconf script as a base for experiments. ./reconf is used by
1649 so it should generally be a working config. Of course, you should always 1518 myself, so it should generally be a working config. Of course, you
1650 report when a combination doesn't work, so it can be fixed. Marc Lehmann 1519 should always report when a combination doesn't work, so it can be
1651 <rxvt@schmorp.de>. 1520 fixed. Marc Lehmann <rxvt@schmorp.de>.
1521
1522 All
1652 1523
1653 --enable-everything 1524 --enable-everything
1654 Add support for all non-multichoice options listed in "./configure 1525 Add (or remove) support for all non-multichoice options listed in
1655 --help". Note that unlike other enable options this is order 1526 "./configure --help".
1656 dependant. You can specify this and then disable options which this
1657 enables by *following* this with the appropriate commands.
1658 1527
1659 --enable-xft 1528 You can specify this and then disable options you do not like by
1529 *following* this with the appropriate "--disable-..." arguments, or
1530 you can start with a minimal configuration by specifying
1531 "--disable-everything" and than adding just the "--enable-..."
1532 arguments you want.
1533
1534 --enable-xft (default: enabled)
1660 Add support for Xft (anti-aliases, among others) fonts. Xft fonts 1535 Add support for Xft (anti-aliases, among others) fonts. Xft fonts
1661 are slower and require lots of memory, but as long as you don't use 1536 are slower and require lots of memory, but as long as you don't use
1662 them, you don't pay for them. 1537 them, you don't pay for them.
1663 1538
1664 --enable-font-styles 1539 --enable-font-styles (default: on)
1665 Add support for bold, *italic* and *bold italic* font styles. The 1540 Add support for bold, *italic* and *bold italic* font styles. The
1666 fonts can be set manually or automatically. 1541 fonts can be set manually or automatically.
1667 1542
1668 --with-codesets=NAME,... 1543 --with-codesets=NAME,... (default: all)
1669 Compile in support for additional codeset (encoding) groups (eu, vn 1544 Compile in support for additional codeset (encoding) groups ("eu",
1670 are always compiled in, which includes most 8-bit character sets). 1545 "vn" are always compiled in, which includes most 8-bit character
1671 These codeset tables are currently only used for driving X11 core 1546 sets). These codeset tables are used for driving X11 core fonts,
1672 fonts, they are not required for Xft fonts. Compiling them in will 1547 they are not required for Xft fonts, although having them compiled
1673 make your binary bigger (together about 700kB), but it doesn't 1548 in lets rxvt-unicode choose replacement fonts more intelligently.
1674 increase memory usage unless you use an X11 font requiring one of 1549 Compiling them in will make your binary bigger (all of together cost
1675 these encodings. 1550 about 700kB), but it doesn't increase memory usage unless you use a
1551 font requiring one of these encodings.
1676 1552
1677 all all available codeset groups 1553 all all available codeset groups
1678 zh common chinese encodings 1554 zh common chinese encodings
1679 zh_ext rarely used but very big chinese encodigs 1555 zh_ext rarely used but very big chinese encodigs
1680 jp common japanese encodings 1556 jp common japanese encodings
1681 jp_ext rarely used but big japanese encodings 1557 jp_ext rarely used but big japanese encodings
1682 kr korean encodings 1558 kr korean encodings
1683 1559
1684 --enable-xim 1560 --enable-xim (default: on)
1685 Add support for XIM (X Input Method) protocol. This allows using 1561 Add support for XIM (X Input Method) protocol. This allows using
1686 alternative input methods (e.g. kinput2) and will also correctly set 1562 alternative input methods (e.g. kinput2) and will also correctly set
1687 up the input for people using dead keys or compose keys. 1563 up the input for people using dead keys or compose keys.
1688 1564
1689 --enable-unicode3 1565 --enable-unicode3 (default: off)
1690 Enable direct support for displaying unicode codepoints above 65535 1566 Enable direct support for displaying unicode codepoints above 65535
1691 (the basic multilingual page). This increases storage requirements 1567 (the basic multilingual page). This increases storage requirements
1692 per character from 2 to 4 bytes. X11 fonts do not yet support these 1568 per character from 2 to 4 bytes. X11 fonts do not yet support these
1693 extra characters, but Xft does. 1569 extra characters, but Xft does.
1694 1570
… …
1696 even without this flag, but the number of such characters is limited 1572 even without this flag, but the number of such characters is limited
1697 to a view thousand (shared with combining characters, see next 1573 to a view thousand (shared with combining characters, see next
1698 switch), and right now rxvt-unicode cannot display them 1574 switch), and right now rxvt-unicode cannot display them
1699 (input/output and cut&paste still work, though). 1575 (input/output and cut&paste still work, though).
1700 1576
1701 --enable-combining 1577 --enable-combining (default: on)
1702 Enable automatic composition of combining characters into composite 1578 Enable automatic composition of combining characters into composite
1703 characters. This is required for proper viewing of text where 1579 characters. This is required for proper viewing of text where
1704 accents are encoded as seperate unicode characters. This is done by 1580 accents are encoded as seperate unicode characters. This is done by
1705 using precomposited characters when available or creating new 1581 using precomposited characters when available or creating new
1706 pseudo-characters when no precomposed form exists. 1582 pseudo-characters when no precomposed form exists.
… …
1715 1591
1716 The combining table also contains entries for arabic presentation 1592 The combining table also contains entries for arabic presentation
1717 forms, but these are not currently used. Bug me if you want these to 1593 forms, but these are not currently used. Bug me if you want these to
1718 be used (and tell me how these are to be used...). 1594 be used (and tell me how these are to be used...).
1719 1595
1720 --enable-fallback(=CLASS) 1596 --enable-fallback(=CLASS) (default: Rxvt)
1721 When reading resource settings, also read settings for class CLASS 1597 When reading resource settings, also read settings for class CLASS.
1722 (default: Rxvt). To disable resource fallback use 1598 To disable resource fallback use --disable-fallback.
1723 --disable-fallback.
1724 1599
1725 --with-res-name=NAME 1600 --with-res-name=NAME (default: urxvt)
1726 Use the given name (default: urxvt) as default application name when 1601 Use the given name as default application name when reading
1727 reading resources. Specify --with-res-name=rxvt to replace rxvt. 1602 resources. Specify --with-res-name=rxvt to replace rxvt.
1728 1603
1729 --with-res-class=CLASS 1604 --with-res-class=CLASS /default: URxvt)
1730 Use the given class (default: URxvt) as default application class 1605 Use the given class as default application class when reading
1731 when reading resources. Specify --with-res-class=Rxvt to replace 1606 resources. Specify --with-res-class=Rxvt to replace rxvt.
1732 rxvt.
1733 1607
1734 --enable-utmp 1608 --enable-utmp (default: on)
1735 Write user and tty to utmp file (used by programs like w) at start 1609 Write user and tty to utmp file (used by programs like w) at start
1736 of rxvt execution and delete information when rxvt exits. 1610 of rxvt execution and delete information when rxvt exits.
1737 1611
1738 --enable-wtmp 1612 --enable-wtmp (default: on)
1739 Write user and tty to wtmp file (used by programs like last) at 1613 Write user and tty to wtmp file (used by programs like last) at
1740 start of rxvt execution and write logout when rxvt exits. This 1614 start of rxvt execution and write logout when rxvt exits. This
1741 option requires --enable-utmp to also be specified. 1615 option requires --enable-utmp to also be specified.
1742 1616
1743 --enable-lastlog 1617 --enable-lastlog (default: on)
1744 Write user and tty to lastlog file (used by programs like lastlogin) 1618 Write user and tty to lastlog file (used by programs like lastlogin)
1745 at start of rxvt execution. This option requires --enable-utmp to 1619 at start of rxvt execution. This option requires --enable-utmp to
1746 also be specified. 1620 also be specified.
1747 1621
1748 --enable-xpm-background 1622 --enable-xpm-background (default: on)
1749 Add support for XPM background pixmaps. 1623 Add support for XPM background pixmaps.
1750 1624
1751 --enable-transparency 1625 --enable-transparency (default: on)
1752 Add support for inheriting parent backgrounds thus giving a fake 1626 Add support for inheriting parent backgrounds thus giving a fake
1753 transparency to the term. 1627 transparency to the term.
1754 1628
1755 --enable-fading 1629 --enable-fading (default: on)
1756 Add support for fading the text when focus is lost. 1630 Add support for fading the text when focus is lost (requires
1631 "--enable-transparency").
1757 1632
1758 --enable-tinting 1633 --enable-tinting (default: on)
1759 Add support for tinting of transparent backgrounds. 1634 Add support for tinting of transparent backgrounds (requires
1635 "--enable-transparency").
1760 1636
1761 --enable-menubar
1762 Add support for our menu bar system (this interacts badly with
1763 dynamic locale switching currently).
1764
1765 --enable-rxvt-scroll 1637 --enable-rxvt-scroll (default: on)
1766 Add support for the original rxvt scrollbar. 1638 Add support for the original rxvt scrollbar.
1767 1639
1768 --enable-next-scroll 1640 --enable-next-scroll (default: on)
1769 Add support for a NeXT-like scrollbar. 1641 Add support for a NeXT-like scrollbar.
1770 1642
1771 --enable-xterm-scroll 1643 --enable-xterm-scroll (default: on)
1772 Add support for an Xterm-like scrollbar. 1644 Add support for an Xterm-like scrollbar.
1773 1645
1774 --enable-plain-scroll 1646 --enable-plain-scroll (default: on)
1775 Add support for a very unobtrusive, plain-looking scrollbar that is 1647 Add support for a very unobtrusive, plain-looking scrollbar that is
1776 the favourite of the rxvt-unicode author, having used it for many 1648 the favourite of the rxvt-unicode author, having used it for many
1777 years. 1649 years.
1778 1650
1779 --enable-half-shadow 1651 --enable-half-shadow (default: off)
1780 Make shadows on the scrollbar only half the normal width & height. 1652 Make shadows on the scrollbar only half the normal width & height.
1781 only applicable to rxvt scrollbars. 1653 only applicable to rxvt scrollbars.
1782 1654
1783 --enable-ttygid 1655 --enable-ttygid (default: off)
1784 Change tty device setting to group "tty" - only use this if your 1656 Change tty device setting to group "tty" - only use this if your
1785 system uses this type of security. 1657 system uses this type of security.
1786 1658
1787 --disable-backspace-key 1659 --disable-backspace-key
1788 Disable any handling of the backspace key by us - let the X server 1660 Removes any handling of the backspace key by us - let the X server
1789 do it. 1661 do it.
1790 1662
1791 --disable-delete-key 1663 --disable-delete-key
1792 Disable any handling of the delete key by us - let the X server do 1664 Removes any handling of the delete key by us - let the X server do
1793 it. 1665 it.
1794 1666
1795 --disable-resources 1667 --disable-resources
1796 Remove all resources checking. 1668 Removes any support for resource checking.
1797
1798 --enable-xgetdefault
1799 Make resources checking via XGetDefault() instead of our small
1800 version which only checks ~/.Xdefaults, or if that doesn't exist
1801 then ~/.Xresources.
1802
1803 Please note that nowadays, things like XIM will automatically pull
1804 in and use the full X resource manager, so the overhead of using it
1805 might be very small, if nonexistant.
1806
1807 --enable-strings
1808 Add support for our possibly faster memset() function and other
1809 various routines, overriding your system's versions which may have
1810 been hand-crafted in assembly or may require extra libraries to link
1811 in. (this breaks ANSI-C rules and has problems on many GNU/Linux
1812 systems).
1813 1669
1814 --disable-swapscreen 1670 --disable-swapscreen
1815 Remove support for swap screen. 1671 Remove support for secondary/swap screen.
1816 1672
1817 --enable-frills 1673 --enable-frills (default: on)
1818 Add support for many small features that are not essential but nice 1674 Add support for many small features that are not essential but nice
1819 to have. Normally you want this, but for very small binaries you may 1675 to have. Normally you want this, but for very small binaries you may
1820 want to disable this. 1676 want to disable this.
1821 1677
1822 A non-exhaustive list of features enabled by "--enable-frills" 1678 A non-exhaustive list of features enabled by "--enable-frills"
1823 (possibly in combination with other switches) is: 1679 (possibly in combination with other switches) is:
1824 1680
1825 MWM-hints 1681 MWM-hints
1682 EWMH-hints (pid, utf8 names) and protocols (ping)
1826 seperate underline colour 1683 seperate underline colour (-underlineColor)
1827 settable border widths and borderless switch 1684 settable border widths and borderless switch (-w, -b, -bl)
1828 settable extra linespacing 1685 settable extra linespacing /-lsp)
1829 extra window properties (e.g. UTF-8 window names and PID)
1830 iso-14755-2 and -3, and visual feedback 1686 iso-14755-2 and -3, and visual feedback
1831 backindex and forwardindex escape sequence 1687 backindex and forwardindex escape sequence
1832 window op and locale change escape sequences 1688 window op and some xterm/OSC escape sequences
1833 tripleclickwords 1689 tripleclickwords (-tcw)
1834 settable insecure mode 1690 settable insecure mode (-insecure)
1835 keysym remapping support 1691 keysym remapping support
1692 cursor blinking and underline cursor (-cb, -uc)
1693 XEmbed support (-embed)
1694 user-pty (-pty-fd)
1695 hold on exit (-hold)
1696 skip builtin block graphics (-sbg)
1697 sgr modes 90..97 and 100..107
1836 1698
1837 --enable-iso14755 1699 --enable-iso14755 (default: on)
1838 Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt). 1700 Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt).
1839 Basic support (section 5.1) is enabled by "--enable-frills", while 1701 Basic support (section 5.1) is enabled by "--enable-frills", while
1840 support for 5.2, 5.3 and 5.4 is enabled with this switch. 1702 support for 5.2, 5.3 and 5.4 is enabled with this switch.
1841 1703
1842 --enable-keepscrolling 1704 --enable-keepscrolling (default: on)
1843 Add support for continual scrolling of the display when you hold the 1705 Add support for continual scrolling of the display when you hold the
1844 mouse button down on a scrollbar arrow. 1706 mouse button down on a scrollbar arrow.
1845 1707
1846 --enable-mousewheel 1708 --enable-mousewheel (default: on)
1847 Add support for scrolling via mouse wheel or buttons 4 & 5. 1709 Add support for scrolling via mouse wheel or buttons 4 & 5.
1848 1710
1849 --enable-slipwheeling 1711 --enable-slipwheeling (default: on)
1850 Add support for continual scrolling (using the mouse wheel as an 1712 Add support for continual scrolling (using the mouse wheel as an
1851 accelerator) while the control key is held down. This option 1713 accelerator) while the control key is held down. This option
1852 requires --enable-mousewheel to also be specified. 1714 requires --enable-mousewheel to also be specified.
1853 1715
1854 --disable-new-selection 1716 --disable-new-selection
1855 Remove support for mouse selection style like that of xterm. 1717 Remove support for mouse selection style like that of xterm.
1856 1718
1857 --enable-dmalloc 1719 --enable-dmalloc (default: off)
1858 Use Gray Watson's malloc - which is good for debugging See 1720 Use Gray Watson's malloc - which is good for debugging See
1859 http://www.letters.com/dmalloc/ for details If you use either this 1721 http://www.letters.com/dmalloc/ for details If you use either this
1860 or the next option, you may need to edit src/Makefile after 1722 or the next option, you may need to edit src/Makefile after
1861 compiling to point DINCLUDE and DLIB to the right places. 1723 compiling to point DINCLUDE and DLIB to the right places.
1862 1724
1863 You can only use either this option and the following (should you 1725 You can only use either this option and the following (should you
1864 use either) . 1726 use either) .
1865 1727
1866 --enable-dlmalloc 1728 --enable-dlmalloc (default: off)
1867 Use Doug Lea's malloc - which is good for a production version See 1729 Use Doug Lea's malloc - which is good for a production version See
1868 <http://g.oswego.edu/dl/html/malloc.html> for details. 1730 <http://g.oswego.edu/dl/html/malloc.html> for details.
1869 1731
1870 --enable-smart-resize 1732 --enable-smart-resize (default: on)
1871 Add smart growth/shrink behaviour when changing font size via from 1733 Add smart growth/shrink behaviour when changing font size via hot
1872 hot keys. This should keep in a fixed position the rxvt corner which 1734 keys. This should keep the window corner which is closest to a
1873 is closest to a corner of the screen. 1735 corner of the screen in a fixed position.
1874 1736
1875 --enable-cursor-blink
1876 Add support for a blinking cursor.
1877
1878 --enable-pointer-blank 1737 --enable-pointer-blank (default: on)
1879 Add support to have the pointer disappear when typing or inactive. 1738 Add support to have the pointer disappear when typing or inactive.
1880 1739
1881 --with-name=NAME 1740 --enable-perl (default: off)
1741 Enable an embedded perl interpreter. See the rxvtperl(3) manpage
1742 (doc/rxvtperl.txt) for more info on this feature, or the files in
1743 src/perl-ext/ for the extensions that are installed by default. The
1744 perl interpreter that is used can be specified via the "PERL"
1745 environment variable when running configure.
1746
1747 --with-name=NAME (default: urxvt)
1882 Set the basename for the installed binaries (default: "urxvt", 1748 Set the basename for the installed binaries, resulting in "urxvt",
1883 resulting in "urxvt", "urxvtd" etc.). Specify "--with-name=rxvt" to 1749 "urxvtd" etc.). Specify "--with-name=rxvt" to replace with "rxvt".
1884 replace with "rxvt".
1885 1750
1886 --with-term=NAME 1751 --with-term=NAME (default: rxvt-unicode)
1887 Change the environmental variable for the terminal to NAME (default 1752 Change the environmental variable for the terminal to NAME.
1888 "rxvt-unicode")
1889 1753
1890 --with-terminfo=PATH 1754 --with-terminfo=PATH
1891 Change the environmental variable for the path to the terminfo tree 1755 Change the environmental variable for the path to the terminfo tree
1892 to PATH. 1756 to PATH.
1893 1757

Diff Legend

– Removed lines
+ Added lines
< Changed lines
> Changed lines