… | |
… | |
18 | The newest version of this document is also available on the World Wide |
18 | The newest version of this document is also available on the World Wide |
19 | Web at |
19 | Web at |
20 | <http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>. |
20 | <http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>. |
21 | |
21 | |
22 | FREQUENTLY ASKED QUESTIONS |
22 | FREQUENTLY ASKED QUESTIONS |
|
|
23 | The new selection selects pieces that are too big, how can I select |
|
|
24 | single words? |
|
|
25 | Yes. For example, if you want to select alphanumeric words, you can |
|
|
26 | use the following resource: |
|
|
27 | |
|
|
28 | URxvt.selection.pattern-0: ([[:word:]]+) |
|
|
29 | |
|
|
30 | If you click more than twice, the selection will be extended more |
|
|
31 | and more. |
|
|
32 | |
|
|
33 | To get a selection that is very similar to the old code, try this |
|
|
34 | pattern: |
|
|
35 | |
|
|
36 | URxvt.selection.pattern-0: ([^"&'()*,;<=>?@[\\\\]^`{|})]+) |
|
|
37 | |
|
|
38 | Please also note that the *LeftClick Shift-LeftClik* combination |
|
|
39 | also selects words like the old code. |
|
|
40 | |
|
|
41 | I don't like the new selection/popups/hotkeys/perl, how do I |
|
|
42 | change/disable it? |
|
|
43 | You can disable the perl extension completely by setting the |
|
|
44 | perl-ext-common resource to the empty string, which also keeps |
|
|
45 | rxvt-unicode from initialising perl, saving memory. |
|
|
46 | |
|
|
47 | If you only want to disable specific features, you first have to |
|
|
48 | identify which perl extension is responsible. For this, read the |
|
|
49 | section PREPACKAGED EXTENSIONS in the rxvtperl(3) manpage. For |
|
|
50 | example, to disable the selection-popup and option-popup, specify |
|
|
51 | this perl-ext-common resource: |
|
|
52 | |
|
|
53 | URxvt.perl-ext-common: default,-selection-popup,-option-popup |
|
|
54 | |
|
|
55 | This will keep the default extensions, but disable the two popup |
|
|
56 | extensions. Some extensions can also be configured, for example, |
|
|
57 | scrollback search mode is triggered by M-s. You can move it to any |
|
|
58 | other combination either by setting the searchable-scrollback |
|
|
59 | resource: |
|
|
60 | |
|
|
61 | URxvt.searchable-scrollback: CM-s |
|
|
62 | |
|
|
63 | Isn't rxvt supposed to be small? Don't all those features bloat? |
|
|
64 | I often get asked about this, and I think, no, they didn't cause |
|
|
65 | extra bloat. If you compare a minimal rxvt and a minimal urxvt, you |
|
|
66 | can see that the urxvt binary is larger (due to some encoding tables |
|
|
67 | always being compiled in), but it actually uses less memory (RSS) |
|
|
68 | after startup. Even with "--disable-everything", this comparison is |
|
|
69 | a bit unfair, as many features unique to urxvt (locale, encoding |
|
|
70 | conversion, iso14755 etc.) are already in use in this mode. |
|
|
71 | |
|
|
72 | text data bss drs rss filename |
|
|
73 | 98398 1664 24 15695 1824 rxvt --disable-everything |
|
|
74 | 188985 9048 66616 18222 1788 urxvt --disable-everything |
|
|
75 | |
|
|
76 | When you "--enable-everything" (which _is_ unfair, as this involves |
|
|
77 | xft and full locale/XIM support which are quite bloaty inside libX11 |
|
|
78 | and my libc), the two diverge, but not unreasnobaly so. |
|
|
79 | |
|
|
80 | text data bss drs rss filename |
|
|
81 | 163431 2152 24 20123 2060 rxvt --enable-everything |
|
|
82 | 1035683 49680 66648 29096 3680 urxvt --enable-everything |
|
|
83 | |
|
|
84 | The very large size of the text section is explained by the |
|
|
85 | east-asian encoding tables, which, if unused, take up disk space but |
|
|
86 | nothing else and can be compiled out unless you rely on X11 core |
|
|
87 | fonts that use those encodings. The BSS size comes from the 64k |
|
|
88 | emergency buffer that my c++ compiler allocates (but of course |
|
|
89 | doesn't use unless you are out of memory). Also, using an xft font |
|
|
90 | instead of a core font immediately adds a few megabytes of RSS. Xft |
|
|
91 | indeed is responsible for a lot of RSS even when not used. |
|
|
92 | |
|
|
93 | Of course, due to every character using two or four bytes instead of |
|
|
94 | one, a large scrollback buffer will ultimately make rxvt-unicode use |
|
|
95 | more memory. |
|
|
96 | |
|
|
97 | Compared to e.g. Eterm (5112k), aterm (3132k) and xterm (4680k), |
|
|
98 | this still fares rather well. And compared to some monsters like |
|
|
99 | gnome-terminal (21152k + extra 4204k in separate processes) or |
|
|
100 | konsole (22200k + extra 43180k in daemons that stay around after |
|
|
101 | exit, plus half a minute of startup time, including the hundreds of |
|
|
102 | warnings it spits out), it fares extremely well *g*. |
|
|
103 | |
|
|
104 | Why C++, isn't that unportable/bloated/uncool? |
|
|
105 | Is this a question? :) It comes up very often. The simple answer is: |
|
|
106 | I had to write it, and C++ allowed me to write and maintain it in a |
|
|
107 | fraction of the time and effort (which is a scarce resource for me). |
|
|
108 | Put even shorter: It simply wouldn't exist without C++. |
|
|
109 | |
|
|
110 | My personal stance on this is that C++ is less portable than C, but |
|
|
111 | in the case of rxvt-unicode this hardly matters, as its portability |
|
|
112 | limits are defined by things like X11, pseudo terminals, locale |
|
|
113 | support and unix domain sockets, which are all less portable than |
|
|
114 | C++ itself. |
|
|
115 | |
|
|
116 | Regarding the bloat, see the above question: It's easy to write |
|
|
117 | programs in C that use gobs of memory, an certainly possible to |
|
|
118 | write programs in C++ that don't. C++ also often comes with large |
|
|
119 | libraries, but this is not necessarily the case with GCC. Here is |
|
|
120 | what rxvt links against on my system with a minimal config: |
|
|
121 | |
|
|
122 | libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000) |
|
|
123 | libc.so.6 => /lib/libc.so.6 (0x00002aaaaadde000) |
|
|
124 | libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab01d000) |
|
|
125 | /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000) |
|
|
126 | |
|
|
127 | And here is rxvt-unicode: |
|
|
128 | |
|
|
129 | libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000) |
|
|
130 | libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000) |
|
|
131 | libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000) |
|
|
132 | libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000) |
|
|
133 | /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000) |
|
|
134 | |
|
|
135 | No large bloated libraries (of course, none were linked in |
|
|
136 | statically), except maybe libX11 :) |
|
|
137 | |
|
|
138 | Does it support tabs, can I have a tabbed rxvt-unicode? |
|
|
139 | rxvt-unicode does not directly support tabs. It will work fine with |
|
|
140 | tabbing functionality of many window managers or similar tabbing |
|
|
141 | programs, and its embedding-features allow it to be embedded into |
|
|
142 | other programs, as witnessed by doc/rxvt-tabbed or the upcoming |
|
|
143 | "Gtk2::URxvt" perl module, which features a tabbed urxvt (murxvt) |
|
|
144 | terminal as an example embedding application. |
|
|
145 | |
23 | How do I know which rxvt-unicode version I'm using? |
146 | How do I know which rxvt-unicode version I'm using? |
24 | The version number is displayed with the usage (-h). Also the escape |
147 | The version number is displayed with the usage (-h). Also the escape |
25 | sequence "ESC [ 8 n" sets the window title to the version number. |
148 | sequence "ESC [ 8 n" sets the window title to the version number. |
|
|
149 | When using the rxvtc client, the version displayed is that of the |
|
|
150 | daemon. |
26 | |
151 | |
27 | I am using Debian GNU/Linux and have a problem... |
152 | I am using Debian GNU/Linux and have a problem... |
28 | The Debian GNU/Linux package of rxvt-unicode contains large patches |
153 | The Debian GNU/Linux package of rxvt-unicode in sarge contains large |
29 | that considerably change the behaviour of rxvt-unicode. Before |
154 | patches that considerably change the behaviour of rxvt-unicode. |
30 | reporting a bug to the original rxvt-unicode author please download |
155 | Before reporting a bug to the original rxvt-unicode author please |
31 | and install the genuine version |
156 | download and install the genuine version |
32 | (<http://software.schmorp.de#rxvt-unicode>) and try to reproduce the |
157 | (<http://software.schmorp.de#rxvt-unicode>) and try to reproduce the |
33 | problem. If you cannot, chances are that the problems are specific |
158 | problem. If you cannot, chances are that the problems are specific |
34 | to Debian GNU/Linux, in which case it should be reported via the |
159 | to Debian GNU/Linux, in which case it should be reported via the |
35 | Debian Bug Tracking System (use "reportbug" to report the bug). |
160 | Debian Bug Tracking System (use "reportbug" to report the bug). |
36 | |
161 | |
37 | For other problems that also affect the Debian package, you can and |
162 | For other problems that also affect the Debian package, you can and |
38 | probably should use the Debian BTS, too, because, after all, it's |
163 | probably should use the Debian BTS, too, because, after all, it's |
39 | also a bug in the Debian version and it serves as a reminder for |
164 | also a bug in the Debian version and it serves as a reminder for |
40 | other users that might encounter the same issue. |
165 | other users that might encounter the same issue. |
|
|
166 | |
|
|
167 | I am maintaining rxvt-unicode for distribution/OS XXX, any |
|
|
168 | recommendation? |
|
|
169 | You should build one binary with the default options. configure now |
|
|
170 | enables most useful options, and the trend goes to making them |
|
|
171 | runtime-switchable, too, so there is usually no drawback to enbaling |
|
|
172 | them, except higher disk and possibly memory usage. The perl |
|
|
173 | interpreter should be enabled, as important functionality (menus, |
|
|
174 | selection, likely more in the future) depends on it. |
|
|
175 | |
|
|
176 | You should not overwrite the "perl-ext-common" snd "perl-ext" |
|
|
177 | resources system-wide (except maybe with "defaults"). This will |
|
|
178 | result in useful behaviour. If your distribution aims at low memory, |
|
|
179 | add an empty "perl-ext-common" resource to the app-defaults file. |
|
|
180 | This will keep the perl interpreter disabled until the user enables |
|
|
181 | it. |
|
|
182 | |
|
|
183 | If you can/want build more binaries, I recommend building a minimal |
|
|
184 | one with "--disable-everything" (very useful) and a maximal one with |
|
|
185 | "--enable-everything" (less useful, it will be very big due to a lot |
|
|
186 | of encodings built-in that increase download times and are rarely |
|
|
187 | used). |
|
|
188 | |
|
|
189 | I need to make it setuid/setgid to support utmp/ptys on my OS, is this |
|
|
190 | safe? |
|
|
191 | Likely not. While I honestly try to make it secure, and am probably |
|
|
192 | not bad at it, I think it is simply unreasonable to expect all of |
|
|
193 | freetype + fontconfig + xft + xlib + perl + ... + rxvt-unicode |
|
|
194 | itself to all be secure. Also, rxvt-unicode disables some options |
|
|
195 | when it detects that it runs setuid or setgid, which is not nice. |
|
|
196 | Besides, with the embedded perl interpreter the possibility for |
|
|
197 | security problems easily multiplies. |
|
|
198 | |
|
|
199 | Elevated privileges are only required for utmp and pty operations on |
|
|
200 | some systems (for example, GNU/Linux doesn't need any extra |
|
|
201 | privileges for ptys, but some need it for utmp support). It is |
|
|
202 | planned to mvoe this into a forked handler process, but this is not |
|
|
203 | yet done. |
|
|
204 | |
|
|
205 | So, while setuid/setgid operation is supported and not a problem on |
|
|
206 | your typical single-user-no-other-logins unix desktop, always |
|
|
207 | remember that its an awful lot of code, most of which isn't checked |
|
|
208 | for security issues regularly. |
41 | |
209 | |
42 | When I log-in to another system it tells me about missing terminfo data? |
210 | When I log-in to another system it tells me about missing terminfo data? |
43 | The terminal description used by rxvt-unicode is not as widely |
211 | The terminal description used by rxvt-unicode is not as widely |
44 | available as that for xterm, or even rxvt (for which the same |
212 | available as that for xterm, or even rxvt (for which the same |
45 | problem often arises). |
213 | problem often arises). |
… | |
… | |
66 | URxvt.termName: rxvt |
234 | URxvt.termName: rxvt |
67 | |
235 | |
68 | If you don't plan to use rxvt (quite common...) you could also |
236 | If you don't plan to use rxvt (quite common...) you could also |
69 | replace the rxvt terminfo file with the rxvt-unicode one. |
237 | replace the rxvt terminfo file with the rxvt-unicode one. |
70 | |
238 | |
|
|
239 | "tic" outputs some error when compiling the terminfo entry. |
|
|
240 | Most likely it's the empty definition for "enacs=". Just replace it |
|
|
241 | by "enacs=\E[0@" and try again. |
|
|
242 | |
71 | "bash"'s readline does not work correctly under rxvt. |
243 | "bash"'s readline does not work correctly under rxvt. |
72 | I need a termcap file entry. |
244 | I need a termcap file entry. |
73 | One reason you might want this is that some distributions or |
245 | One reason you might want this is that some distributions or |
74 | operating systems still compile some programs using the |
246 | operating systems still compile some programs using the |
75 | long-obsoleted termcap (Fedora Core's bash is one example) and rely |
247 | long-obsoleted termcap library (Fedora Core's bash is one example) |
76 | on a termcap entry for "rxvt-unicode". |
248 | and rely on a termcap entry for "rxvt-unicode". |
77 | |
249 | |
78 | You could use rxvt's termcap entry with resonable results in many |
250 | You could use rxvt's termcap entry with resonable results in many |
79 | cases. You can also create a termcap entry by using terminfo's |
251 | cases. You can also create a termcap entry by using terminfo's |
80 | infocmp program like this: |
252 | infocmp program like this: |
81 | |
253 | |
… | |
… | |
83 | |
255 | |
84 | Or you could use this termcap entry, generated by the command above: |
256 | Or you could use this termcap entry, generated by the command above: |
85 | |
257 | |
86 | rxvt-unicode|rxvt-unicode terminal (X Window System):\ |
258 | rxvt-unicode|rxvt-unicode terminal (X Window System):\ |
87 | :am:bw:eo:km:mi:ms:xn:xo:\ |
259 | :am:bw:eo:km:mi:ms:xn:xo:\ |
88 | :co#80:it#8:li#24:\ |
260 | :co#80:it#8:li#24:lm#0:\ |
89 | :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ |
261 | :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ |
90 | :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\ |
262 | :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\ |
91 | :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:al=\E[L:\ |
263 | :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=\E(B:al=\E[L:\ |
92 | :as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\ |
264 | :as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\ |
93 | :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\ |
265 | :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\ |
94 | :ec=\E[%dX:ei=\E[4l:ho=\E[H:i1=\E[?47l\E=\E[?1l:ic=\E[@:\ |
266 | :dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:\ |
|
|
267 | :i1=\E[?47l\E=\E[?1l:ic=\E[@:im=\E[4h:\ |
95 | :im=\E[4h:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\ |
268 | :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\ |
96 | :k0=\E[21~:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\ |
269 | :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\ |
97 | :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\ |
270 | :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\ |
98 | :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:\ |
271 | :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\ |
99 | :ke=\E[?1l\E>:kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\ |
272 | :kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\ |
100 | :ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:\ |
273 | :mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:rc=\E8:\ |
101 | :nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:\ |
274 | :sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ |
102 | :st=\EH:ta=^I:te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:\ |
275 | :te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:\ |
103 | :up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\ |
276 | :us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\ |
104 | :vs=\E[?25h: |
277 | :vs=\E[?25h: |
105 | |
278 | |
106 | Why does "ls" no longer have coloured output? |
279 | Why does "ls" no longer have coloured output? |
107 | The "ls" in the GNU coreutils unfortunately doesn't use terminfo to |
280 | The "ls" in the GNU coreutils unfortunately doesn't use terminfo to |
108 | decide wether a terminal has colour, but uses it's own configuration |
281 | decide wether a terminal has colour, but uses it's own configuration |
… | |
… | |
246 | that doesn't work, you might be forced to use a different font. |
419 | that doesn't work, you might be forced to use a different font. |
247 | |
420 | |
248 | All of this is not a problem when using X11 core fonts, as their |
421 | All of this is not a problem when using X11 core fonts, as their |
249 | bounding box data is correct. |
422 | bounding box data is correct. |
250 | |
423 | |
|
|
424 | On Solaris 9, many line-drawing characters are too wide. |
|
|
425 | Seems to be a known bug, read |
|
|
426 | <http://nixdoc.net/files/forum/about34198.html>. Some people use the |
|
|
427 | following ugly workaround to get non-double-wide-characters working: |
|
|
428 | |
|
|
429 | #define wcwidth(x) wcwidth(x) > 1 ? 1 : wcwidth(x) |
|
|
430 | |
251 | My Compose (Multi_key) key is no longer working. |
431 | My Compose (Multi_key) key is no longer working. |
252 | The most common causes for this are that either your locale is not |
432 | The most common causes for this are that either your locale is not |
253 | set correctly, or you specified a preeditStyle that is not supported |
433 | set correctly, or you specified a preeditStyle that is not supported |
254 | by your input method. For example, if you specified OverTheSpot and |
434 | by your input method. For example, if you specified OverTheSpot and |
255 | your input method (e.g. the default input method handling Compose |
435 | your input method (e.g. the default input method handling Compose |
… | |
… | |
299 | As you might have guessed, FreeBSD does neither define this symobl |
479 | As you might have guessed, FreeBSD does neither define this symobl |
300 | nor does it support it. Instead, it uses it's own internal |
480 | nor does it support it. Instead, it uses it's own internal |
301 | representation of wchar_t. This is, of course, completely fine with |
481 | representation of wchar_t. This is, of course, completely fine with |
302 | respect to standards. |
482 | respect to standards. |
303 | |
483 | |
|
|
484 | However, that means rxvt-unicode only works in "POSIX", "ISO-8859-1" |
|
|
485 | and "UTF-8" locales under FreeBSD (which all use Unicode as wchar_t. |
|
|
486 | |
304 | However, "__STDC_ISO_10646__" is the only sane way to support |
487 | "__STDC_ISO_10646__" is the only sane way to support multi-language |
305 | multi-language apps in an OS, as using a locale-dependent (and |
488 | apps in an OS, as using a locale-dependent (and non-standardized) |
306 | non-standardized) representation of wchar_t makes it impossible to |
489 | representation of wchar_t makes it impossible to convert between |
307 | convert between wchar_t (as used by X11 and your applications) and |
490 | wchar_t (as used by X11 and your applications) and any other |
308 | any other encoding without implementing OS-specific-wrappers for |
491 | encoding without implementing OS-specific-wrappers for each and |
309 | each and every locale. There simply are no APIs to convert wchar_t |
492 | every locale. There simply are no APIs to convert wchar_t into |
310 | into anything except the current locale encoding. |
493 | anything except the current locale encoding. |
311 | |
494 | |
312 | Some applications (such as the formidable mlterm) work around this |
495 | Some applications (such as the formidable mlterm) work around this |
313 | by carrying their own replacement functions for character set |
496 | by carrying their own replacement functions for character set |
314 | handling with them, and either implementing OS-dependent hacks or |
497 | handling with them, and either implementing OS-dependent hacks or |
315 | doing multiple conversions (which is slow and unreliable in case the |
498 | doing multiple conversions (which is slow and unreliable in case the |
… | |
… | |
317 | emulator). |
500 | emulator). |
318 | |
501 | |
319 | The rxvt-unicode author insists that the right way to fix this is in |
502 | The rxvt-unicode author insists that the right way to fix this is in |
320 | the system libraries once and for all, instead of forcing every app |
503 | the system libraries once and for all, instead of forcing every app |
321 | to carry complete replacements for them :) |
504 | to carry complete replacements for them :) |
|
|
505 | |
|
|
506 | I use Solaris 9 and it doesn't compile/work/etc. |
|
|
507 | Try the diff in doc/solaris9.patch as a base. It fixes the worst |
|
|
508 | problems with "wcwidth" and a compile problem. |
|
|
509 | |
|
|
510 | How can I use rxvt-unicode under cygwin? |
|
|
511 | rxvt-unicode should compile and run out of the box on cygwin, using |
|
|
512 | the X11 libraries that come with cygwin. libW11 emulation is no |
|
|
513 | longer supported (and makes no sense, either, as it only supported a |
|
|
514 | single font). I recommend starting the X-server in "-multiwindow" or |
|
|
515 | "-rootless" mode instead, which will result in similar look&feel as |
|
|
516 | the old libW11 emulation. |
|
|
517 | |
|
|
518 | At the time of this writing, cygwin didn't seem to support any |
|
|
519 | multi-byte encodings (you might try "LC_CTYPE=C-UTF-8"), so you are |
|
|
520 | likely limited to 8-bit encodings. |
322 | |
521 | |
323 | How does rxvt-unicode determine the encoding to use? |
522 | How does rxvt-unicode determine the encoding to use? |
324 | Is there an option to switch encodings? |
523 | Is there an option to switch encodings? |
325 | Unlike some other terminals, rxvt-unicode has no encoding switch, |
524 | Unlike some other terminals, rxvt-unicode has no encoding switch, |
326 | and no specific "utf-8" mode, such as xterm. In fact, it doesn't |
525 | and no specific "utf-8" mode, such as xterm. In fact, it doesn't |
… | |
… | |
402 | |
601 | |
403 | My input method wants <some encoding> but I want UTF-8, what can I do? |
602 | My input method wants <some encoding> but I want UTF-8, what can I do? |
404 | You can specify separate locales for the input method and the rest |
603 | You can specify separate locales for the input method and the rest |
405 | of the terminal, using the resource "imlocale": |
604 | of the terminal, using the resource "imlocale": |
406 | |
605 | |
407 | URxvt*imlocale: ja_JP.EUC-JP |
606 | URxvt.imlocale: ja_JP.EUC-JP |
408 | |
607 | |
409 | Now you can start your terminal with "LC_CTYPE=ja_JP.UTF-8" and |
608 | Now you can start your terminal with "LC_CTYPE=ja_JP.UTF-8" and |
410 | still use your input method. Please note, however, that you will not |
609 | still use your input method. Please note, however, that you will not |
411 | be able to input characters outside "EUC-JP" in a normal way then, |
610 | be able to input characters outside "EUC-JP" in a normal way then, |
412 | as your input method limits you. |
611 | as your input method limits you. |
|
|
612 | |
|
|
613 | Rxvt-unicode crashes when the X Input Method changes or exits. |
|
|
614 | Unfortunately, this is unavoidable, as the XIM protocol is racy by |
|
|
615 | design. Applications can avoid some crashes at the expense of memory |
|
|
616 | leaks, and Input Methods can avoid some crashes by careful ordering |
|
|
617 | at exit time. kinput2 (and derived input methods) generally |
|
|
618 | succeeds, while SCIM (or similar input methods) fails. In the end, |
|
|
619 | however, crashes cannot be completely avoided even if both sides |
|
|
620 | cooperate. |
|
|
621 | |
|
|
622 | So the only workaround is not to kill your Input Method Servers. |
413 | |
623 | |
414 | Rxvt-unicode uses gobs of memory, how can I reduce that? |
624 | Rxvt-unicode uses gobs of memory, how can I reduce that? |
415 | Rxvt-unicode tries to obey the rule of not charging you for |
625 | Rxvt-unicode tries to obey the rule of not charging you for |
416 | something you don't use. One thing you should try is to configure |
626 | something you don't use. One thing you should try is to configure |
417 | out all settings that you don't need, for example, Xft support is a |
627 | out all settings that you don't need, for example, Xft support is a |
… | |
… | |
427 | it gets worse, as rxvt-unicode then uses 8 bytes per screen cell. |
637 | it gets worse, as rxvt-unicode then uses 8 bytes per screen cell. |
428 | |
638 | |
429 | Can I speed up Xft rendering somehow? |
639 | Can I speed up Xft rendering somehow? |
430 | Yes, the most obvious way to speed it up is to avoid Xft entirely, |
640 | Yes, the most obvious way to speed it up is to avoid Xft entirely, |
431 | as it is simply slow. If you still want Xft fonts you might try to |
641 | as it is simply slow. If you still want Xft fonts you might try to |
432 | disable antialiasing (by appending ":antialiasing=false"), which |
642 | disable antialiasing (by appending ":antialias=false"), which saves |
433 | saves lots of memory and also speeds up rendering considerably. |
643 | lots of memory and also speeds up rendering considerably. |
434 | |
644 | |
435 | Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong? |
645 | Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong? |
436 | Rxvt-unicode will use whatever you specify as a font. If it needs to |
646 | Rxvt-unicode will use whatever you specify as a font. If it needs to |
437 | fall back to it's default font search list it will prefer X11 core |
647 | fall back to it's default font search list it will prefer X11 core |
438 | fonts, because they are small and fast, and then use Xft fonts. It |
648 | fonts, because they are small and fast, and then use Xft fonts. It |
… | |
… | |
444 | Mouse cut/paste suddenly no longer works. |
654 | Mouse cut/paste suddenly no longer works. |
445 | Make sure that mouse reporting is actually turned off since killing |
655 | Make sure that mouse reporting is actually turned off since killing |
446 | some editors prematurely may leave the mouse in mouse report mode. |
656 | some editors prematurely may leave the mouse in mouse report mode. |
447 | I've heard that tcsh may use mouse reporting unless it otherwise |
657 | I've heard that tcsh may use mouse reporting unless it otherwise |
448 | specified. A quick check is to see if cut/paste works when the Alt |
658 | specified. A quick check is to see if cut/paste works when the Alt |
449 | or Shift keys are depressed. See rxvt(7) |
659 | or Shift keys are depressed. |
450 | |
660 | |
451 | What's with this bold/blink stuff? |
661 | What's with this bold/blink stuff? |
452 | If no bold colour is set via "colorBD:", bold will invert text using |
662 | If no bold colour is set via "colorBD:", bold will invert text using |
453 | the standard foreground colour. |
663 | the standard foreground colour. |
454 | |
664 | |
… | |
… | |
510 | URxvt.color14: #73f7ff |
720 | URxvt.color14: #73f7ff |
511 | URxvt.color7: #e1dddd |
721 | URxvt.color7: #e1dddd |
512 | URxvt.color15: #e1dddd |
722 | URxvt.color15: #e1dddd |
513 | |
723 | |
514 | How can I start rxvtd in a race-free way? |
724 | How can I start rxvtd in a race-free way? |
515 | Despite it's name, rxvtd is not a real daemon, but more like a |
725 | Try "rxvtd -f -o", which tells rxvtd to open the display, create the |
516 | server that answers rxvtc's requests, so it doesn't background |
726 | listening socket and then fork. |
517 | itself. |
|
|
518 | |
|
|
519 | To ensure rxvtd is listening on it's socket, you can use the |
|
|
520 | following method to wait for the startup message before continuing: |
|
|
521 | |
|
|
522 | { rxvtd & } | read |
|
|
523 | |
727 | |
524 | What's with the strange Backspace/Delete key behaviour? |
728 | What's with the strange Backspace/Delete key behaviour? |
525 | Assuming that the physical Backspace key corresponds to the |
729 | Assuming that the physical Backspace key corresponds to the |
526 | BackSpace keysym (not likely for Linux ... see the following |
730 | BackSpace keysym (not likely for Linux ... see the following |
527 | question) there are two standard values that can be used for |
731 | question) there are two standard values that can be used for |
… | |
… | |
546 | |
750 | |
547 | # use Backspace = ^? |
751 | # use Backspace = ^? |
548 | $ stty erase ^? |
752 | $ stty erase ^? |
549 | $ rxvt |
753 | $ rxvt |
550 | |
754 | |
551 | Toggle with "ESC [ 36 h" / "ESC [ 36 l" as documented in rxvt(7). |
755 | Toggle with "ESC [ 36 h" / "ESC [ 36 l". |
552 | |
756 | |
553 | For an existing rxvt-unicode: |
757 | For an existing rxvt-unicode: |
554 | |
758 | |
555 | # use Backspace = ^H |
759 | # use Backspace = ^H |
556 | $ stty erase ^H |
760 | $ stty erase ^H |
… | |
… | |
668 | |
872 | |
669 | RXVT TECHNICAL REFERENCE |
873 | RXVT TECHNICAL REFERENCE |
670 | DESCRIPTION |
874 | DESCRIPTION |
671 | The rest of this document describes various technical aspects of |
875 | The rest of this document describes various technical aspects of |
672 | rxvt-unicode. First the description of supported command sequences, |
876 | rxvt-unicode. First the description of supported command sequences, |
673 | followed by menu and pixmap support and last by a description of all |
877 | followed by pixmap support and last by a description of all features |
674 | features selectable at "configure" time. |
878 | selectable at "configure" time. |
675 | |
879 | |
676 | Definitions |
880 | Definitions |
677 | "c" The literal character c. |
881 | "c" The literal character c. |
678 | |
882 | |
679 | "C" A single (required) character. |
883 | "C" A single (required) character. |
… | |
… | |
1048 | |
1252 | |
1049 | "Ps = 9" X10 XTerm |
1253 | "Ps = 9" X10 XTerm |
1050 | h Send Mouse X & Y on button press. |
1254 | h Send Mouse X & Y on button press. |
1051 | l No mouse reporting. |
1255 | l No mouse reporting. |
1052 | |
1256 | |
1053 | "Ps = 10" (rxvt) |
|
|
1054 | h menuBar visible |
|
|
1055 | l menuBar invisible |
|
|
1056 | |
|
|
1057 | "Ps = 25" |
1257 | "Ps = 25" |
1058 | h Visible cursor {cnorm/cvvis} |
1258 | h Visible cursor {cnorm/cvvis} |
1059 | l Invisible cursor {civis} |
1259 | l Invisible cursor {civis} |
1060 | |
1260 | |
1061 | "Ps = 30" |
1261 | "Ps = 30" |
… | |
… | |
1109 | l Scroll to bottom on TTY output |
1309 | l Scroll to bottom on TTY output |
1110 | |
1310 | |
1111 | "Ps = 1011" (rxvt) |
1311 | "Ps = 1011" (rxvt) |
1112 | h Scroll to bottom when a key is pressed |
1312 | h Scroll to bottom when a key is pressed |
1113 | l Don't scroll to bottom when a key is pressed |
1313 | l Don't scroll to bottom when a key is pressed |
|
|
1314 | |
|
|
1315 | "Ps = 1021" (rxvt) |
|
|
1316 | h Bold/italic implies high intensity (see option -is) |
|
|
1317 | l Font styles have no effect on intensity (Compile styles) |
1114 | |
1318 | |
1115 | "Ps = 1047" |
1319 | "Ps = 1047" |
1116 | h Use Alternate Screen Buffer |
1320 | h Use Alternate Screen Buffer |
1117 | l Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it |
1321 | l Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it |
1118 | |
1322 | |
… | |
… | |
1141 | Ps = 10 Change colour of text foreground to Pt (NB: may change in future) |
1345 | Ps = 10 Change colour of text foreground to Pt (NB: may change in future) |
1142 | Ps = 11 Change colour of text background to Pt (NB: may change in future) |
1346 | Ps = 11 Change colour of text background to Pt (NB: may change in future) |
1143 | Ps = 12 Change colour of text cursor foreground to Pt |
1347 | Ps = 12 Change colour of text cursor foreground to Pt |
1144 | Ps = 13 Change colour of mouse foreground to Pt |
1348 | Ps = 13 Change colour of mouse foreground to Pt |
1145 | Ps = 17 Change colour of highlight characters to Pt |
1349 | Ps = 17 Change colour of highlight characters to Pt |
1146 | Ps = 18 Change colour of bold characters to Pt |
1350 | Ps = 18 Change colour of bold characters to Pt [deprecated, see 706] |
1147 | Ps = 19 Change colour of underlined characters to Pt |
1351 | Ps = 19 Change colour of underlined characters to Pt [deprecated, see 707] |
1148 | Ps = 20 Change default background to Pt |
1352 | Ps = 20 Change default background to Pt |
1149 | Ps = 39 Change default foreground colour to Pt rxvt compile-time option |
1353 | Ps = 39 Change default foreground colour to Pt. |
1150 | Ps = 46 Change Log File to Pt unimplemented |
1354 | Ps = 46 Change Log File to Pt unimplemented |
1151 | Ps = 49 Change default background colour to Pt rxvt compile-time option |
1355 | Ps = 49 Change default background colour to Pt. |
1152 | Ps = 50 Set fontset to Pt, with the following special values of Pt (rxvt) #+n change up n #-n change down n if n is missing of 0, a value of 1 is used empty change to font0 n change to font n |
1356 | Ps = 50 Set fontset to Pt, with the following special values of Pt (rxvt) #+n change up n #-n change down n if n is missing of 0, a value of 1 is used empty change to font0 n change to font n |
1153 | Ps = 55 Log all scrollback buffer and all of screen to Pt |
1357 | Ps = 55 Log all scrollback buffer and all of screen to Pt |
1154 | Ps = 701 Change current locale to Pt, or, if Pt is ?, return the current locale (rxvt extension) |
1358 | Ps = 701 Change current locale to Pt, or, if Pt is ?, return the current locale (Compile frills). |
1155 | Ps = 703 Menubar command Pt rxvt compile-time option (rxvt-unicode extension) |
|
|
1156 | Ps = 704 Change colour of italic characters to Pt |
1359 | Ps = 704 Change colour of italic characters to Pt |
1157 | Ps = 705 Change background pixmap tint colour to Pt |
1360 | Ps = 705 Change background pixmap tint colour to Pt (Compile transparency). |
|
|
1361 | Ps = 706 Change colour of bold characters to Pt |
|
|
1362 | Ps = 707 Change colour of underlined characters to Pt |
1158 | Ps = 710 Set normal fontset to Pt. Same as Ps = 50. |
1363 | Ps = 710 Set normal fontset to Pt. Same as Ps = 50. |
1159 | Ps = 711 Set bold fontset to Pt. Similar to Ps = 50. |
1364 | Ps = 711 Set bold fontset to Pt. Similar to Ps = 50 (Compile styles). |
1160 | Ps = 712 Set italic fontset to Pt. Similar to Ps = 50. |
1365 | Ps = 712 Set italic fontset to Pt. Similar to Ps = 50 (Compile styles). |
1161 | Ps = 713 Set bold-italic fontset to Pt. Similar to Ps = 50. |
1366 | Ps = 713 Set bold-italic fontset to Pt. Similar to Ps = 50 (Compile styles). |
|
|
1367 | Ps = 720 Move viewing window up by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills). |
|
|
1368 | Ps = 721 Move viewing window down by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills). |
|
|
1369 | Ps = 777 Call the perl extension with the given string, which should be of the form extension:parameters (Compile perl). |
1162 | |
1370 | |
1163 | |
1371 | |
1164 | |
|
|
1165 | menuBar |
|
|
1166 | The exact syntax used is *almost* solidified. In the menus, DON'T try to |
|
|
1167 | use menuBar commands that add or remove a menuBar. |
|
|
1168 | |
|
|
1169 | Note that in all of the commands, the */path/* *cannot* be omitted: use |
|
|
1170 | ./ to specify a menu relative to the current menu. |
|
|
1171 | |
|
|
1172 | Overview of menuBar operation |
|
|
1173 | For the menuBar XTerm escape sequence "ESC ] 703 ; Pt ST", the syntax of |
|
|
1174 | "Pt" can be used for a variety of tasks: |
|
|
1175 | |
|
|
1176 | At the top level is the current menuBar which is a member of a circular |
|
|
1177 | linked-list of other such menuBars. |
|
|
1178 | |
|
|
1179 | The menuBar acts as a parent for the various drop-down menus, which in |
|
|
1180 | turn, may have labels, separator lines, menuItems and subMenus. |
|
|
1181 | |
|
|
1182 | The menuItems are the useful bits: you can use them to mimic keyboard |
|
|
1183 | input or even to send text or escape sequences back to rxvt. |
|
|
1184 | |
|
|
1185 | The menuBar syntax is intended to provide a simple yet robust method of |
|
|
1186 | constructing and manipulating menus and navigating through the menuBars. |
|
|
1187 | |
|
|
1188 | The first step is to use the tag [menu:*name*] which creates the menuBar |
|
|
1189 | called *name* and allows access. You may now or menus, subMenus, and |
|
|
1190 | menuItems. Finally, use the tag [done] to set the menuBar access as |
|
|
1191 | readonly to prevent accidental corruption of the menus. To re-access the |
|
|
1192 | current menuBar for alterations, use the tag [menu], make the |
|
|
1193 | alterations and then use [done] |
|
|
1194 | |
|
|
1195 | |
|
|
1196 | |
|
|
1197 | Commands |
|
|
1198 | [menu:+*name*] |
|
|
1199 | access the named menuBar for creation or alteration. If a new |
|
|
1200 | menuBar is created, it is called *name* (max of 15 chars) and the |
|
|
1201 | current menuBar is pushed onto the stack |
|
|
1202 | |
|
|
1203 | [menu] |
|
|
1204 | access the current menuBar for alteration |
|
|
1205 | |
|
|
1206 | [title:+*string*] |
|
|
1207 | set the current menuBar's title to *string*, which may contain the |
|
|
1208 | following format specifiers: %% : literal % character %n : rxvt name |
|
|
1209 | (as per the -name command-line option) %v : rxvt version |
|
|
1210 | |
|
|
1211 | [done] |
|
|
1212 | set menuBar access as readonly. End-of-file tag for [read:+*file*] |
|
|
1213 | operations. |
|
|
1214 | |
|
|
1215 | [read:+*file*] |
|
|
1216 | read menu commands directly from *file* (extension ".menu" will be |
|
|
1217 | appended if required.) Start reading at a line with [menu] or |
|
|
1218 | [menu:+*name* and continuing until [done] is encountered. |
|
|
1219 | |
|
|
1220 | Blank and comment lines (starting with #) are ignored. Actually, |
|
|
1221 | since any invalid menu commands are also ignored, almost anything |
|
|
1222 | could be construed as a comment line, but this may be tightened up |
|
|
1223 | in the future ... so don't count on it!. |
|
|
1224 | |
|
|
1225 | [read:+*file*;+*name*] |
|
|
1226 | The same as [read:+*file*], but start reading at a line with |
|
|
1227 | [menu:+*name*] and continuing until [done:+*name*] or [done] is |
|
|
1228 | encountered. |
|
|
1229 | |
|
|
1230 | [dump] |
|
|
1231 | dump all menuBars to the file /tmp/rxvt-PID in a format suitable for |
|
|
1232 | later rereading. |
|
|
1233 | |
|
|
1234 | [rm:name] |
|
|
1235 | remove the named menuBar |
|
|
1236 | |
|
|
1237 | [rm] [rm:] |
|
|
1238 | remove the current menuBar |
|
|
1239 | |
|
|
1240 | [rm*] [rm:*] |
|
|
1241 | remove all menuBars |
|
|
1242 | |
|
|
1243 | [swap] |
|
|
1244 | swap the top two menuBars |
|
|
1245 | |
|
|
1246 | [prev] |
|
|
1247 | access the previous menuBar |
|
|
1248 | |
|
|
1249 | [next] |
|
|
1250 | access the next menuBar |
|
|
1251 | |
|
|
1252 | [show] |
|
|
1253 | Enable display of the menuBar |
|
|
1254 | |
|
|
1255 | [hide] |
|
|
1256 | Disable display of the menuBar |
|
|
1257 | |
|
|
1258 | [pixmap:+*name*] |
|
|
1259 | [pixmap:+*name*;*scaling*] |
|
|
1260 | (set the background pixmap globally |
|
|
1261 | |
|
|
1262 | A Future implementation *may* make this local to the menubar) |
|
|
1263 | |
|
|
1264 | [:+*command*:] |
|
|
1265 | ignore the menu readonly status and issue a *command* to or a menu |
|
|
1266 | or menuitem or change the ; a useful shortcut for setting the quick |
|
|
1267 | arrows from a menuBar. |
|
|
1268 | |
|
|
1269 | |
|
|
1270 | |
|
|
1271 | Adding and accessing menus |
|
|
1272 | The following commands may also be + prefixed. |
|
|
1273 | |
|
|
1274 | /+ access menuBar top level |
|
|
1275 | |
|
|
1276 | ./+ access current menu level |
|
|
1277 | |
|
|
1278 | ../+ |
|
|
1279 | access parent menu (1 level up) |
|
|
1280 | |
|
|
1281 | ../../ |
|
|
1282 | access parent menu (multiple levels up) |
|
|
1283 | |
|
|
1284 | */path/*menu |
|
|
1285 | add/access menu |
|
|
1286 | |
|
|
1287 | */path/*menu/* |
|
|
1288 | add/access menu and clear it if it exists |
|
|
1289 | |
|
|
1290 | */path/*{-} |
|
|
1291 | add separator |
|
|
1292 | |
|
|
1293 | */path/*{item} |
|
|
1294 | add item as a label |
|
|
1295 | |
|
|
1296 | */path/*{item} action |
|
|
1297 | add/alter *menuitem* with an associated *action* |
|
|
1298 | |
|
|
1299 | */path/*{item}{right-text} |
|
|
1300 | add/alter *menuitem* with right-text as the right-justified text and |
|
|
1301 | as the associated *action* |
|
|
1302 | |
|
|
1303 | */path/*{item}{rtext} action |
|
|
1304 | add/alter *menuitem* with an associated *action* and with rtext as |
|
|
1305 | the right-justified text. |
|
|
1306 | |
|
|
1307 | Special characters in *action* must be backslash-escaped: |
|
|
1308 | \a \b \E \e \n \r \t \octal |
|
|
1309 | |
|
|
1310 | or in control-character notation: |
|
|
1311 | ^@, ^A .. ^Z .. ^_, ^? |
|
|
1312 | |
|
|
1313 | To send a string starting with a NUL (^@) character to the program, |
|
|
1314 | start *action* with a pair of NUL characters (^@^@), the first of which |
|
|
1315 | will be stripped off and the balance directed to the program. Otherwise |
|
|
1316 | if *action* begins with NUL followed by non-+NUL characters, the leading |
|
|
1317 | NUL is stripped off and the balance is sent back to rxvt. |
|
|
1318 | |
|
|
1319 | As a convenience for the many Emacs-type editors, *action* may start |
|
|
1320 | with M- (eg, M-$ is equivalent to \E$) and a CR will be appended if |
|
|
1321 | missed from M-x commands. |
|
|
1322 | |
|
|
1323 | As a convenience for issuing XTerm ESC ] sequences from a menubar (or |
|
|
1324 | quick arrow), a BEL (^G) will be appended if needed. |
|
|
1325 | |
|
|
1326 | For example, |
|
|
1327 | M-xapropos is equivalent to \Exapropos\r |
|
|
1328 | |
|
|
1329 | and \E]703;mona;100 is equivalent to \E]703;mona;100\a |
|
|
1330 | |
|
|
1331 | The option {*right-rtext*} will be right-justified. In the absence of a |
|
|
1332 | specified action, this text will be used as the *action* as well. |
|
|
1333 | |
|
|
1334 | For example, |
|
|
1335 | /File/{Open}{^X^F} is equivalent to /File/{Open}{^X^F} ^X^F |
|
|
1336 | |
|
|
1337 | The left label *is* necessary, since it's used for matching, but |
|
|
1338 | implicitly hiding the left label (by using same name for both left and |
|
|
1339 | right labels), or explicitly hiding the left label (by preceeding it |
|
|
1340 | with a dot), makes it possible to have right-justified text only. |
|
|
1341 | |
|
|
1342 | For example, |
|
|
1343 | /File/{Open}{Open} Open-File-Action |
|
|
1344 | |
|
|
1345 | or hiding it |
|
|
1346 | /File/{.anylabel}{Open} Open-File-Action |
|
|
1347 | |
|
|
1348 | |
|
|
1349 | |
|
|
1350 | Removing menus |
|
|
1351 | -/*+ |
|
|
1352 | remove all menus from the menuBar, the same as [clear] |
|
|
1353 | |
|
|
1354 | -+*/path*menu+ |
|
|
1355 | remove menu |
|
|
1356 | |
|
|
1357 | -+*/path*{item}+ |
|
|
1358 | remove item |
|
|
1359 | |
|
|
1360 | -+*/path*{-} |
|
|
1361 | remove separator) |
|
|
1362 | |
|
|
1363 | -/path/menu/* |
|
|
1364 | remove all items, separators and submenus from menu |
|
|
1365 | |
|
|
1366 | |
|
|
1367 | |
|
|
1368 | Quick Arrows |
|
|
1369 | The menus also provide a hook for *quick arrows* to provide easier user |
|
|
1370 | access. If nothing has been explicitly set, the default is to emulate |
|
|
1371 | the curror keys. The syntax permits each arrow to be altered |
|
|
1372 | individually or all four at once without re-entering their common |
|
|
1373 | beginning/end text. For example, to explicitly associate cursor actions |
|
|
1374 | with the arrows, any of the following forms could be used: |
|
|
1375 | |
|
|
1376 | <r>+*Right* |
|
|
1377 | <l>+*Left* |
|
|
1378 | <u>+*Up* |
|
|
1379 | <d>+*Down* |
|
|
1380 | Define actions for the respective arrow buttons |
|
|
1381 | |
|
|
1382 | <b>+*Begin* |
|
|
1383 | <e>+*End* |
|
|
1384 | Define common beginning/end parts for *quick arrows* which used in |
|
|
1385 | conjunction with the above <r> <l> <u> <d> constructs |
|
|
1386 | |
|
|
1387 | For example, define arrows individually, |
|
|
1388 | <u>\E[A |
|
|
1389 | |
|
|
1390 | <d>\E[B |
|
|
1391 | |
|
|
1392 | <r>\E[C |
|
|
1393 | |
|
|
1394 | <l>\E[D |
|
|
1395 | |
|
|
1396 | or all at once |
|
|
1397 | <u>\E[AZ<><d>\E[BZ<><r>\E[CZ<><l>\E[D |
|
|
1398 | |
|
|
1399 | or more compactly (factoring out common parts) |
|
|
1400 | <b>\E[<u>AZ<><d>BZ<><r>CZ<><l>D |
|
|
1401 | |
|
|
1402 | |
|
|
1403 | |
|
|
1404 | Command Summary |
|
|
1405 | A short summary of the most *common* commands: |
|
|
1406 | |
|
|
1407 | [menu:name] |
|
|
1408 | use an existing named menuBar or start a new one |
|
|
1409 | |
|
|
1410 | [menu] |
|
|
1411 | use the current menuBar |
|
|
1412 | |
|
|
1413 | [title:string] |
|
|
1414 | set menuBar title |
|
|
1415 | |
|
|
1416 | [done] |
|
|
1417 | set menu access to readonly and, if reading from a file, signal EOF |
|
|
1418 | |
|
|
1419 | [done:name] |
|
|
1420 | if reading from a file using [read:file;name] signal EOF |
|
|
1421 | |
|
|
1422 | [rm:name] |
|
|
1423 | remove named menuBar(s) |
|
|
1424 | |
|
|
1425 | [rm] [rm:] |
|
|
1426 | remove current menuBar |
|
|
1427 | |
|
|
1428 | [rm*] [rm:*] |
|
|
1429 | remove all menuBar(s) |
|
|
1430 | |
|
|
1431 | [swap] |
|
|
1432 | swap top two menuBars |
|
|
1433 | |
|
|
1434 | [prev] |
|
|
1435 | access the previous menuBar |
|
|
1436 | |
|
|
1437 | [next] |
|
|
1438 | access the next menuBar |
|
|
1439 | |
|
|
1440 | [show] |
|
|
1441 | map menuBar |
|
|
1442 | |
|
|
1443 | [hide] |
|
|
1444 | unmap menuBar |
|
|
1445 | |
|
|
1446 | [pixmap;file] |
|
|
1447 | [pixmap;file;scaling] |
|
|
1448 | set a background pixmap |
|
|
1449 | |
|
|
1450 | [read:file] |
|
|
1451 | [read:file;name] |
|
|
1452 | read in a menu from a file |
|
|
1453 | |
|
|
1454 | [dump] |
|
|
1455 | dump out all menuBars to /tmp/rxvt-PID |
|
|
1456 | |
|
|
1457 | / access menuBar top level |
|
|
1458 | |
|
|
1459 | ./ |
|
|
1460 | ../ |
|
|
1461 | ../../ |
|
|
1462 | access current or parent menu level |
|
|
1463 | |
|
|
1464 | /path/menu |
|
|
1465 | add/access menu |
|
|
1466 | |
|
|
1467 | /path/{-} |
|
|
1468 | add separator |
|
|
1469 | |
|
|
1470 | /path/{item}{rtext} action |
|
|
1471 | add/alter menu item |
|
|
1472 | |
|
|
1473 | -/* remove all menus from the menuBar |
|
|
1474 | |
|
|
1475 | -/path/menu |
|
|
1476 | remove menu items, separators and submenus from menu |
|
|
1477 | |
|
|
1478 | -/path/menu |
|
|
1479 | remove menu |
|
|
1480 | |
|
|
1481 | -/path/{item} |
|
|
1482 | remove item |
|
|
1483 | |
|
|
1484 | -/path/{-} |
|
|
1485 | remove separator |
|
|
1486 | |
|
|
1487 | <b>Begin<r>Right<l>Left<u>Up<d>Down<e>End |
|
|
1488 | menu quick arrows |
|
|
1489 | |
1372 | |
1490 | XPM |
1373 | XPM |
1491 | For the XPM XTerm escape sequence "ESC ] 20 ; Pt ST" then value of "Pt" |
1374 | For the XPM XTerm escape sequence "ESC ] 20 ; Pt ST" then value of "Pt" |
1492 | can be the name of the background pixmap followed by a sequence of |
1375 | can be the name of the background pixmap followed by a sequence of |
1493 | scaling/positioning commands separated by semi-colons. The |
1376 | scaling/positioning commands separated by semi-colons. The |
… | |
… | |
1628 | XK_KP_8 8 ESC O x |
1511 | XK_KP_8 8 ESC O x |
1629 | XK_KP_9 9 ESC O y |
1512 | XK_KP_9 9 ESC O y |
1630 | |
1513 | |
1631 | CONFIGURE OPTIONS |
1514 | CONFIGURE OPTIONS |
1632 | General hint: if you get compile errors, then likely your configuration |
1515 | General hint: if you get compile errors, then likely your configuration |
1633 | hasn't been tested well. Either try with --enable-everything or use the |
1516 | hasn't been tested well. Either try with "--enable-everything" or use |
1634 | ./reconf script as a base for experiments. ./reconf is used by myself, |
1517 | the ./reconf script as a base for experiments. ./reconf is used by |
1635 | so it should generally be a working config. Of course, you should always |
1518 | myself, so it should generally be a working config. Of course, you |
1636 | report when a combination doesn't work, so it can be fixed. Marc Lehmann |
1519 | should always report when a combination doesn't work, so it can be |
1637 | <rxvt@schmorp.de>. |
1520 | fixed. Marc Lehmann <rxvt@schmorp.de>. |
|
|
1521 | |
|
|
1522 | All |
1638 | |
1523 | |
1639 | --enable-everything |
1524 | --enable-everything |
1640 | Add support for all non-multichoice options listed in "./configure |
1525 | Add (or remove) support for all non-multichoice options listed in |
1641 | --help". Note that unlike other enable options this is order |
1526 | "./configure --help". |
1642 | dependant. You can specify this and then disable options which this |
|
|
1643 | enables by *following* this with the appropriate commands. |
|
|
1644 | |
1527 | |
1645 | --enable-xft |
1528 | You can specify this and then disable options you do not like by |
|
|
1529 | *following* this with the appropriate "--disable-..." arguments, or |
|
|
1530 | you can start with a minimal configuration by specifying |
|
|
1531 | "--disable-everything" and than adding just the "--enable-..." |
|
|
1532 | arguments you want. |
|
|
1533 | |
|
|
1534 | --enable-xft (default: enabled) |
1646 | Add support for Xft (anti-aliases, among others) fonts. Xft fonts |
1535 | Add support for Xft (anti-aliases, among others) fonts. Xft fonts |
1647 | are slower and require lots of memory, but as long as you don't use |
1536 | are slower and require lots of memory, but as long as you don't use |
1648 | them, you don't pay for them. |
1537 | them, you don't pay for them. |
1649 | |
1538 | |
1650 | --enable-font-styles |
1539 | --enable-font-styles (default: on) |
1651 | Add support for bold, *italic* and *bold italic* font styles. The |
1540 | Add support for bold, *italic* and *bold italic* font styles. The |
1652 | fonts can be set manually or automatically. |
1541 | fonts can be set manually or automatically. |
1653 | |
1542 | |
1654 | --with-codesets=NAME,... |
1543 | --with-codesets=NAME,... (default: all) |
1655 | Compile in support for additional codeset (encoding) groups (eu, vn |
1544 | Compile in support for additional codeset (encoding) groups ("eu", |
1656 | are always compiled in, which includes most 8-bit character sets). |
1545 | "vn" are always compiled in, which includes most 8-bit character |
1657 | These codeset tables are currently only used for driving X11 core |
1546 | sets). These codeset tables are used for driving X11 core fonts, |
1658 | fonts, they are not required for Xft fonts. Compiling them in will |
1547 | they are not required for Xft fonts, although having them compiled |
1659 | make your binary bigger (together about 700kB), but it doesn't |
1548 | in lets rxvt-unicode choose replacement fonts more intelligently. |
1660 | increase memory usage unless you use an X11 font requiring one of |
1549 | Compiling them in will make your binary bigger (all of together cost |
1661 | these encodings. |
1550 | about 700kB), but it doesn't increase memory usage unless you use a |
|
|
1551 | font requiring one of these encodings. |
1662 | |
1552 | |
1663 | all all available codeset groups |
1553 | all all available codeset groups |
1664 | zh common chinese encodings |
1554 | zh common chinese encodings |
1665 | zh_ext rarely used but very big chinese encodigs |
1555 | zh_ext rarely used but very big chinese encodigs |
1666 | jp common japanese encodings |
1556 | jp common japanese encodings |
1667 | jp_ext rarely used but big japanese encodings |
1557 | jp_ext rarely used but big japanese encodings |
1668 | kr korean encodings |
1558 | kr korean encodings |
1669 | |
1559 | |
1670 | --enable-xim |
1560 | --enable-xim (default: on) |
1671 | Add support for XIM (X Input Method) protocol. This allows using |
1561 | Add support for XIM (X Input Method) protocol. This allows using |
1672 | alternative input methods (e.g. kinput2) and will also correctly set |
1562 | alternative input methods (e.g. kinput2) and will also correctly set |
1673 | up the input for people using dead keys or compose keys. |
1563 | up the input for people using dead keys or compose keys. |
1674 | |
1564 | |
1675 | --enable-unicode3 |
1565 | --enable-unicode3 (default: off) |
1676 | Enable direct support for displaying unicode codepoints above 65535 |
1566 | Enable direct support for displaying unicode codepoints above 65535 |
1677 | (the basic multilingual page). This increases storage requirements |
1567 | (the basic multilingual page). This increases storage requirements |
1678 | per character from 2 to 4 bytes. X11 fonts do not yet support these |
1568 | per character from 2 to 4 bytes. X11 fonts do not yet support these |
1679 | extra characters, but Xft does. |
1569 | extra characters, but Xft does. |
1680 | |
1570 | |
… | |
… | |
1682 | even without this flag, but the number of such characters is limited |
1572 | even without this flag, but the number of such characters is limited |
1683 | to a view thousand (shared with combining characters, see next |
1573 | to a view thousand (shared with combining characters, see next |
1684 | switch), and right now rxvt-unicode cannot display them |
1574 | switch), and right now rxvt-unicode cannot display them |
1685 | (input/output and cut&paste still work, though). |
1575 | (input/output and cut&paste still work, though). |
1686 | |
1576 | |
1687 | --enable-combining |
1577 | --enable-combining (default: on) |
1688 | Enable automatic composition of combining characters into composite |
1578 | Enable automatic composition of combining characters into composite |
1689 | characters. This is required for proper viewing of text where |
1579 | characters. This is required for proper viewing of text where |
1690 | accents are encoded as seperate unicode characters. This is done by |
1580 | accents are encoded as seperate unicode characters. This is done by |
1691 | using precomposited characters when available or creating new |
1581 | using precomposited characters when available or creating new |
1692 | pseudo-characters when no precomposed form exists. |
1582 | pseudo-characters when no precomposed form exists. |
1693 | |
1583 | |
1694 | Without --enable-unicode3, the number of additional precomposed |
1584 | Without --enable-unicode3, the number of additional precomposed |
1695 | characters is rather limited (2048, if this is full, rxvt will use |
1585 | characters is rather limited (2048, if this is full, rxvt-unicode |
1696 | the private use area, extending the number of combinations to 8448). |
1586 | will use the private use area, extending the number of combinations |
1697 | With --enable-unicode3, no practical limit exists. This will also |
1587 | to 8448). With --enable-unicode3, no practical limit exists. |
1698 | enable storage of characters >65535. |
1588 | |
|
|
1589 | This option will also enable storage (but not display) of characters |
|
|
1590 | beyond plane 0 (>65535) when --enable-unicode3 was not specified. |
1699 | |
1591 | |
1700 | The combining table also contains entries for arabic presentation |
1592 | The combining table also contains entries for arabic presentation |
1701 | forms, but these are not currently used. Bug me if you want these to |
1593 | forms, but these are not currently used. Bug me if you want these to |
1702 | be used. |
1594 | be used (and tell me how these are to be used...). |
1703 | |
1595 | |
1704 | --enable-fallback(=CLASS) |
1596 | --enable-fallback(=CLASS) (default: Rxvt) |
1705 | When reading resource settings, also read settings for class CLASS |
1597 | When reading resource settings, also read settings for class CLASS. |
1706 | (default: Rxvt). To disable resource fallback use |
1598 | To disable resource fallback use --disable-fallback. |
1707 | --disable-fallback. |
|
|
1708 | |
1599 | |
1709 | --with-res-name=NAME |
1600 | --with-res-name=NAME (default: urxvt) |
1710 | Use the given name (default: urxvt) as default application name when |
1601 | Use the given name as default application name when reading |
1711 | reading resources. Specify --with-res-name=rxvt to replace rxvt. |
1602 | resources. Specify --with-res-name=rxvt to replace rxvt. |
1712 | |
1603 | |
1713 | --with-res-class=CLASS |
1604 | --with-res-class=CLASS /default: URxvt) |
1714 | Use the given class (default: URxvt) as default application class |
1605 | Use the given class as default application class when reading |
1715 | when reading resources. Specify --with-res-class=Rxvt to replace |
1606 | resources. Specify --with-res-class=Rxvt to replace rxvt. |
1716 | rxvt. |
|
|
1717 | |
1607 | |
1718 | --enable-utmp |
1608 | --enable-utmp (default: on) |
1719 | Write user and tty to utmp file (used by programs like w) at start |
1609 | Write user and tty to utmp file (used by programs like w) at start |
1720 | of rxvt execution and delete information when rxvt exits. |
1610 | of rxvt execution and delete information when rxvt exits. |
1721 | |
1611 | |
1722 | --enable-wtmp |
1612 | --enable-wtmp (default: on) |
1723 | Write user and tty to wtmp file (used by programs like last) at |
1613 | Write user and tty to wtmp file (used by programs like last) at |
1724 | start of rxvt execution and write logout when rxvt exits. This |
1614 | start of rxvt execution and write logout when rxvt exits. This |
1725 | option requires --enable-utmp to also be specified. |
1615 | option requires --enable-utmp to also be specified. |
1726 | |
1616 | |
1727 | --enable-lastlog |
1617 | --enable-lastlog (default: on) |
1728 | Write user and tty to lastlog file (used by programs like lastlogin) |
1618 | Write user and tty to lastlog file (used by programs like lastlogin) |
1729 | at start of rxvt execution. This option requires --enable-utmp to |
1619 | at start of rxvt execution. This option requires --enable-utmp to |
1730 | also be specified. |
1620 | also be specified. |
1731 | |
1621 | |
1732 | --enable-xpm-background |
1622 | --enable-xpm-background (default: on) |
1733 | Add support for XPM background pixmaps. |
1623 | Add support for XPM background pixmaps. |
1734 | |
1624 | |
1735 | --enable-transparency |
1625 | --enable-transparency (default: on) |
1736 | Add support for inheriting parent backgrounds thus giving a fake |
1626 | Add support for inheriting parent backgrounds thus giving a fake |
1737 | transparency to the term. |
1627 | transparency to the term. |
1738 | |
1628 | |
1739 | --enable-fading |
1629 | --enable-fading (default: on) |
1740 | Add support for fading the text when focus is lost. |
1630 | Add support for fading the text when focus is lost (requires |
|
|
1631 | "--enable-transparency"). |
1741 | |
1632 | |
1742 | --enable-tinting |
1633 | --enable-tinting (default: on) |
1743 | Add support for tinting of transparent backgrounds. |
1634 | Add support for tinting of transparent backgrounds (requires |
|
|
1635 | "--enable-transparency"). |
1744 | |
1636 | |
1745 | --enable-menubar |
|
|
1746 | Add support for our menu bar system (this interacts badly with |
|
|
1747 | dynamic locale switching currently). |
|
|
1748 | |
|
|
1749 | --enable-rxvt-scroll |
1637 | --enable-rxvt-scroll (default: on) |
1750 | Add support for the original rxvt scrollbar. |
1638 | Add support for the original rxvt scrollbar. |
1751 | |
1639 | |
1752 | --enable-next-scroll |
1640 | --enable-next-scroll (default: on) |
1753 | Add support for a NeXT-like scrollbar. |
1641 | Add support for a NeXT-like scrollbar. |
1754 | |
1642 | |
1755 | --enable-xterm-scroll |
1643 | --enable-xterm-scroll (default: on) |
1756 | Add support for an Xterm-like scrollbar. |
1644 | Add support for an Xterm-like scrollbar. |
1757 | |
1645 | |
1758 | --enable-plain-scroll |
1646 | --enable-plain-scroll (default: on) |
1759 | Add support for a very unobtrusive, plain-looking scrollbar that is |
1647 | Add support for a very unobtrusive, plain-looking scrollbar that is |
1760 | the favourite of the rxvt-unicode author, having used it for many |
1648 | the favourite of the rxvt-unicode author, having used it for many |
1761 | years. |
1649 | years. |
1762 | |
1650 | |
1763 | --enable-half-shadow |
1651 | --enable-half-shadow (default: off) |
1764 | Make shadows on the scrollbar only half the normal width & height. |
1652 | Make shadows on the scrollbar only half the normal width & height. |
1765 | only applicable to rxvt scrollbars. |
1653 | only applicable to rxvt scrollbars. |
1766 | |
1654 | |
1767 | --enable-ttygid |
1655 | --enable-ttygid (default: off) |
1768 | Change tty device setting to group "tty" - only use this if your |
1656 | Change tty device setting to group "tty" - only use this if your |
1769 | system uses this type of security. |
1657 | system uses this type of security. |
1770 | |
1658 | |
1771 | --disable-backspace-key |
1659 | --disable-backspace-key |
1772 | Disable any handling of the backspace key by us - let the X server |
1660 | Removes any handling of the backspace key by us - let the X server |
1773 | do it. |
1661 | do it. |
1774 | |
1662 | |
1775 | --disable-delete-key |
1663 | --disable-delete-key |
1776 | Disable any handling of the delete key by us - let the X server do |
1664 | Removes any handling of the delete key by us - let the X server do |
1777 | it. |
1665 | it. |
1778 | |
1666 | |
1779 | --disable-resources |
1667 | --disable-resources |
1780 | Remove all resources checking. |
1668 | Removes any support for resource checking. |
1781 | |
|
|
1782 | --enable-xgetdefault |
|
|
1783 | Make resources checking via XGetDefault() instead of our small |
|
|
1784 | version which only checks ~/.Xdefaults, or if that doesn't exist |
|
|
1785 | then ~/.Xresources. |
|
|
1786 | |
|
|
1787 | Please note that nowadays, things like XIM will automatically pull |
|
|
1788 | in and use the full X resource manager, so the overhead of using it |
|
|
1789 | might be very small, if nonexistant. |
|
|
1790 | |
|
|
1791 | --enable-strings |
|
|
1792 | Add support for our possibly faster memset() function and other |
|
|
1793 | various routines, overriding your system's versions which may have |
|
|
1794 | been hand-crafted in assembly or may require extra libraries to link |
|
|
1795 | in. (this breaks ANSI-C rules and has problems on many GNU/Linux |
|
|
1796 | systems). |
|
|
1797 | |
1669 | |
1798 | --disable-swapscreen |
1670 | --disable-swapscreen |
1799 | Remove support for swap screen. |
1671 | Remove support for secondary/swap screen. |
1800 | |
1672 | |
1801 | --enable-frills |
1673 | --enable-frills (default: on) |
1802 | Add support for many small features that are not essential but nice |
1674 | Add support for many small features that are not essential but nice |
1803 | to have. Normally you want this, but for very small binaries you may |
1675 | to have. Normally you want this, but for very small binaries you may |
1804 | want to disable this. |
1676 | want to disable this. |
1805 | |
1677 | |
1806 | A non-exhaustive list of features enabled by "--enable-frills" |
1678 | A non-exhaustive list of features enabled by "--enable-frills" |
1807 | (possibly in combination with other switches) is: |
1679 | (possibly in combination with other switches) is: |
1808 | |
1680 | |
1809 | MWM-hints |
1681 | MWM-hints |
|
|
1682 | EWMH-hints (pid, utf8 names) and protocols (ping) |
1810 | seperate underline colour |
1683 | seperate underline colour (-underlineColor) |
1811 | settable border widths and borderless switch |
1684 | settable border widths and borderless switch (-w, -b, -bl) |
1812 | settable extra linespacing |
1685 | settable extra linespacing /-lsp) |
1813 | extra window properties (e.g. UTF-8 window names and PID) |
|
|
1814 | iso-14755-2 and -3, and visual feedback |
1686 | iso-14755-2 and -3, and visual feedback |
1815 | backindex and forwardindex escape sequence |
1687 | backindex and forwardindex escape sequence |
1816 | window op and locale change escape sequences |
1688 | window op and some xterm/OSC escape sequences |
1817 | tripleclickwords |
1689 | tripleclickwords (-tcw) |
1818 | settable insecure mode |
1690 | settable insecure mode (-insecure) |
1819 | keysym remapping support |
1691 | keysym remapping support |
|
|
1692 | cursor blinking and underline cursor (-cb, -uc) |
|
|
1693 | XEmbed support (-embed) |
|
|
1694 | user-pty (-pty-fd) |
|
|
1695 | hold on exit (-hold) |
|
|
1696 | skip builtin block graphics (-sbg) |
|
|
1697 | sgr modes 90..97 and 100..107 |
1820 | |
1698 | |
1821 | --enable-iso14755 |
1699 | --enable-iso14755 (default: on) |
1822 | Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt). |
1700 | Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt). |
1823 | Basic support (section 5.1) is enabled by "--enable-frills", while |
1701 | Basic support (section 5.1) is enabled by "--enable-frills", while |
1824 | support for 5.2, 5.3 and 5.4 is enabled with this switch. |
1702 | support for 5.2, 5.3 and 5.4 is enabled with this switch. |
1825 | |
1703 | |
1826 | --enable-keepscrolling |
1704 | --enable-keepscrolling (default: on) |
1827 | Add support for continual scrolling of the display when you hold the |
1705 | Add support for continual scrolling of the display when you hold the |
1828 | mouse button down on a scrollbar arrow. |
1706 | mouse button down on a scrollbar arrow. |
1829 | |
1707 | |
1830 | --enable-mousewheel |
1708 | --enable-mousewheel (default: on) |
1831 | Add support for scrolling via mouse wheel or buttons 4 & 5. |
1709 | Add support for scrolling via mouse wheel or buttons 4 & 5. |
1832 | |
1710 | |
1833 | --enable-slipwheeling |
1711 | --enable-slipwheeling (default: on) |
1834 | Add support for continual scrolling (using the mouse wheel as an |
1712 | Add support for continual scrolling (using the mouse wheel as an |
1835 | accelerator) while the control key is held down. This option |
1713 | accelerator) while the control key is held down. This option |
1836 | requires --enable-mousewheel to also be specified. |
1714 | requires --enable-mousewheel to also be specified. |
1837 | |
1715 | |
1838 | --disable-new-selection |
1716 | --disable-new-selection |
1839 | Remove support for mouse selection style like that of xterm. |
1717 | Remove support for mouse selection style like that of xterm. |
1840 | |
1718 | |
1841 | --enable-dmalloc |
1719 | --enable-dmalloc (default: off) |
1842 | Use Gray Watson's malloc - which is good for debugging See |
1720 | Use Gray Watson's malloc - which is good for debugging See |
1843 | http://www.letters.com/dmalloc/ for details If you use either this |
1721 | http://www.letters.com/dmalloc/ for details If you use either this |
1844 | or the next option, you may need to edit src/Makefile after |
1722 | or the next option, you may need to edit src/Makefile after |
1845 | compiling to point DINCLUDE and DLIB to the right places. |
1723 | compiling to point DINCLUDE and DLIB to the right places. |
1846 | |
1724 | |
1847 | You can only use either this option and the following (should you |
1725 | You can only use either this option and the following (should you |
1848 | use either) . |
1726 | use either) . |
1849 | |
1727 | |
1850 | --enable-dlmalloc |
1728 | --enable-dlmalloc (default: off) |
1851 | Use Doug Lea's malloc - which is good for a production version See |
1729 | Use Doug Lea's malloc - which is good for a production version See |
1852 | <http://g.oswego.edu/dl/html/malloc.html> for details. |
1730 | <http://g.oswego.edu/dl/html/malloc.html> for details. |
1853 | |
1731 | |
1854 | --enable-smart-resize |
1732 | --enable-smart-resize (default: on) |
1855 | Add smart growth/shrink behaviour when changing font size via from |
1733 | Add smart growth/shrink behaviour when changing font size via hot |
1856 | hot keys. This should keep in a fixed position the rxvt corner which |
1734 | keys. This should keep the window corner which is closest to a |
1857 | is closest to a corner of the screen. |
1735 | corner of the screen in a fixed position. |
1858 | |
1736 | |
1859 | --enable-cursor-blink |
|
|
1860 | Add support for a blinking cursor. |
|
|
1861 | |
|
|
1862 | --enable-pointer-blank |
1737 | --enable-pointer-blank (default: on) |
1863 | Add support to have the pointer disappear when typing or inactive. |
1738 | Add support to have the pointer disappear when typing or inactive. |
1864 | |
1739 | |
1865 | --with-name=NAME |
1740 | --enable-perl (default: off) |
|
|
1741 | Enable an embedded perl interpreter. See the rxvtperl(3) manpage |
|
|
1742 | (doc/rxvtperl.txt) for more info on this feature, or the files in |
|
|
1743 | src/perl-ext/ for the extensions that are installed by default. The |
|
|
1744 | perl interpreter that is used can be specified via the "PERL" |
|
|
1745 | environment variable when running configure. |
|
|
1746 | |
|
|
1747 | --with-name=NAME (default: urxvt) |
1866 | Set the basename for the installed binaries (default: "urxvt", |
1748 | Set the basename for the installed binaries, resulting in "urxvt", |
1867 | resulting in "urxvt", "urxvtd" etc.). Specify "--with-name=rxvt" to |
1749 | "urxvtd" etc.). Specify "--with-name=rxvt" to replace with "rxvt". |
1868 | replace with "rxvt". |
|
|
1869 | |
1750 | |
1870 | --with-term=NAME |
1751 | --with-term=NAME (default: rxvt-unicode) |
1871 | Change the environmental variable for the terminal to NAME (default |
1752 | Change the environmental variable for the terminal to NAME. |
1872 | "rxvt-unicode") |
|
|
1873 | |
1753 | |
1874 | --with-terminfo=PATH |
1754 | --with-terminfo=PATH |
1875 | Change the environmental variable for the path to the terminfo tree |
1755 | Change the environmental variable for the path to the terminfo tree |
1876 | to PATH. |
1756 | to PATH. |
1877 | |
1757 | |