… | |
… | |
18 | The newest version of this document is also available on the World Wide |
18 | The newest version of this document is also available on the World Wide |
19 | Web at |
19 | Web at |
20 | <http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>. |
20 | <http://cvs.schmorp.de/browse/*checkout*/rxvt-unicode/doc/rxvt.7.html>. |
21 | |
21 | |
22 | FREQUENTLY ASKED QUESTIONS |
22 | FREQUENTLY ASKED QUESTIONS |
|
|
23 | Isn't rxvt supposed to be small? Don't all those features bloat? |
|
|
24 | I often get asked about this, and I think, no, they didn't cause |
|
|
25 | extra bloat. If you compare a minimal rxvt and a minimal urxvt, you |
|
|
26 | can see that the urxvt binary is larger (due to some encoding tables |
|
|
27 | always being compiled in), but it actually uses less memory (RSS) |
|
|
28 | after startup. Even with "--disable-everything", this comparison is |
|
|
29 | a bit unfair, as many features unique to urxvt (locale, encoding |
|
|
30 | conversion, iso14755 etc.) are already in use in this mode. |
|
|
31 | |
|
|
32 | text data bss drs rss filename |
|
|
33 | 98398 1664 24 15695 1824 rxvt --disable-everything |
|
|
34 | 188985 9048 66616 18222 1788 urxvt --disable-everything |
|
|
35 | |
|
|
36 | When you "--enable-everything" (which _is_ unfair, as this involves |
|
|
37 | xft and full locale/XIM support which are quite bloaty inside libX11 |
|
|
38 | and my libc), the two diverge, but not unreasnobaly so. |
|
|
39 | |
|
|
40 | text data bss drs rss filename |
|
|
41 | 163431 2152 24 20123 2060 rxvt --enable-everything |
|
|
42 | 1035683 49680 66648 29096 3680 urxvt --enable-everything |
|
|
43 | |
|
|
44 | The very large size of the text section is explained by the |
|
|
45 | east-asian encoding tables, which, if unused, take up disk space but |
|
|
46 | nothing else and can be compiled out unless you rely on X11 core |
|
|
47 | fonts that use those encodings. The BSS size comes from the 64k |
|
|
48 | emergency buffer that my c++ compiler allocates (but of course |
|
|
49 | doesn't use unless you are out of memory). Also, using an xft font |
|
|
50 | instead of a core font immediately adds a few megabytes of RSS. Xft |
|
|
51 | indeed is responsible for a lot of RSS even when not used. |
|
|
52 | |
|
|
53 | Of course, due to every character using two or four bytes instead of |
|
|
54 | one, a large scrollback buffer will ultimately make rxvt-unicode use |
|
|
55 | more memory. |
|
|
56 | |
|
|
57 | Compared to e.g. Eterm (5112k), aterm (3132k) and xterm (4680k), |
|
|
58 | this still fares rather well. And compared to some monsters like |
|
|
59 | gnome-terminal (21152k + extra 4204k in separate processes) or |
|
|
60 | konsole (22200k + extra 43180k in daemons that stay around after |
|
|
61 | exit, plus half aminute of startup time, including the hundreds of |
|
|
62 | warnings it spits out), it fares extremely well *g*. |
|
|
63 | |
|
|
64 | Why C++, isn't that unportable/bloated/uncool? |
|
|
65 | Is this a question? :) It comes up very often. The simple answer is: |
|
|
66 | I had to write it, and C++ allowed me to write and maintain it in a |
|
|
67 | fraction of the time and effort (which is a scarce resource for me). |
|
|
68 | Put even shorter: It simply wouldn't exist without C++. |
|
|
69 | |
|
|
70 | My personal stance on this is that C++ is less portable than C, but |
|
|
71 | in the case of rxvt-unicode this hardly matters, as its portability |
|
|
72 | limits are defined by things like X11, pseudo terminals, locale |
|
|
73 | support and unix domain sockets, which are all less portable than |
|
|
74 | C++ itself. |
|
|
75 | |
|
|
76 | Regarding the bloat, see the above question: It's easy to write |
|
|
77 | programs in C that use gobs of memory, an certainly possible to |
|
|
78 | write programs in C++ that don't. C++ also often comes with large |
|
|
79 | libraries, but this is not necessarily the case with GCC. Here is |
|
|
80 | what rxvt links against on my system with a minimal config: |
|
|
81 | |
|
|
82 | libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000) |
|
|
83 | libc.so.6 => /lib/libc.so.6 (0x00002aaaaadde000) |
|
|
84 | libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab01d000) |
|
|
85 | /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000) |
|
|
86 | |
|
|
87 | And here is rxvt-unicode: |
|
|
88 | |
|
|
89 | libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x00002aaaaabc3000) |
|
|
90 | libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00002aaaaada2000) |
|
|
91 | libc.so.6 => /lib/libc.so.6 (0x00002aaaaaeb0000) |
|
|
92 | libdl.so.2 => /lib/libdl.so.2 (0x00002aaaab0ee000) |
|
|
93 | /lib64/ld-linux-x86-64.so.2 (0x00002aaaaaaab000) |
|
|
94 | |
|
|
95 | No large bloated libraries (of course, none were linked in |
|
|
96 | statically), except maybe libX11 :) |
|
|
97 | |
|
|
98 | Does it support tabs, can I have a tabbed rxvt-unicode? |
|
|
99 | rxvt-unicode does not directly support tabs. It will work fine with |
|
|
100 | tabbing functionality of many window managers or similar tabbing |
|
|
101 | programs, and its embedding-features allow it to be embedded into |
|
|
102 | other programs, as witnessed by doc/rxvt-tabbed or the upcoming |
|
|
103 | "Gtk2::URxvt" perl module, which features a tabbed urxvt (murxvt) |
|
|
104 | terminal as an example embedding application. |
|
|
105 | |
23 | How do I know which rxvt-unicode version I'm using? |
106 | How do I know which rxvt-unicode version I'm using? |
24 | The version number is displayed with the usage (-h). Also the escape |
107 | The version number is displayed with the usage (-h). Also the escape |
25 | sequence "ESC [ 8 n" sets the window title to the version number. |
108 | sequence "ESC [ 8 n" sets the window title to the version number. |
|
|
109 | When using the rxvtc client, the version displayed is that of the |
|
|
110 | daemon. |
26 | |
111 | |
27 | I am using Debian GNU/Linux and have a problem... |
112 | I am using Debian GNU/Linux and have a problem... |
28 | The Debian GNU/Linux package of rxvt-unicode contains large patches |
113 | The Debian GNU/Linux package of rxvt-unicode in sarge contains large |
29 | that considerably change the behaviour of rxvt-unicode. Before |
114 | patches that considerably change the behaviour of rxvt-unicode. |
30 | reporting a bug to the original rxvt-unicode author please download |
115 | Before reporting a bug to the original rxvt-unicode author please |
31 | and install the genuine version |
116 | download and install the genuine version |
32 | (<http://software.schmorp.de#rxvt-unicode>) and try to reproduce the |
117 | (<http://software.schmorp.de#rxvt-unicode>) and try to reproduce the |
33 | problem. If you cannot, chances are that the problems are specific |
118 | problem. If you cannot, chances are that the problems are specific |
34 | to Debian GNU/Linux, in which case it should be reported via the |
119 | to Debian GNU/Linux, in which case it should be reported via the |
35 | Debian Bug Tracking System (use "reportbug" to report the bug). |
120 | Debian Bug Tracking System (use "reportbug" to report the bug). |
36 | |
121 | |
37 | For other problems that also affect the Debian package, you can and |
122 | For other problems that also affect the Debian package, you can and |
38 | probably should use the Debian BTS, too, because, after all, it's |
123 | probably should use the Debian BTS, too, because, after all, it's |
39 | also a bug in the Debian version and it serves as a reminder for |
124 | also a bug in the Debian version and it serves as a reminder for |
40 | other users that might encounter the same issue. |
125 | other users that might encounter the same issue. |
|
|
126 | |
|
|
127 | I am maintaining rxvt-unicode for distribution/OS XXX, any |
|
|
128 | recommendation? |
|
|
129 | You should build one binary with the default options. configure now |
|
|
130 | enables most useful options, and the trend goes to making them |
|
|
131 | runtime-switchable, too, so there is usually no drawback to enbaling |
|
|
132 | them, except higher disk and possibly memory usage. The perl |
|
|
133 | interpreter should be enabled, as important functionality (menus, |
|
|
134 | selection, likely more in the future) depends on it. |
|
|
135 | |
|
|
136 | You should not overwrite the "perl-ext-common" snd "perl-ext" |
|
|
137 | resources system-wide (except maybe with "defaults"). This will |
|
|
138 | result in useful behaviour. If your distribution aims at low memory, |
|
|
139 | add an empty "perl-ext-common" resource to the app-defaults file. |
|
|
140 | This will keep the perl interpreter disabled until the user enables |
|
|
141 | it. |
|
|
142 | |
|
|
143 | If you can/want build more binaries, I recommend building a minimal |
|
|
144 | one with "--disable-everything" (very useful) and a maximal one with |
|
|
145 | "--enable-everything" (less useful, it will be very big due to a lot |
|
|
146 | of encodings built-in that increase download times and are rarely |
|
|
147 | used). |
|
|
148 | |
|
|
149 | I need to make it setuid/setgid to support utmp/ptys on my OS, is this |
|
|
150 | safe? |
|
|
151 | Likely not. While I honestly try to make it secure, and am probably |
|
|
152 | not bad at it, I think it is simply unreasonable to expect all of |
|
|
153 | freetype + fontconfig + xft + xlib + ... + rxvt-unicode itself to |
|
|
154 | all be secure. Also, rxvt-unicode disables some options when it |
|
|
155 | detects that it runs setuid or setgid, which is not nice. |
|
|
156 | |
|
|
157 | Elevated privileges are only required for utmp and pty operations on |
|
|
158 | some systems (for example, GNU/Linux doesn't need any extra |
|
|
159 | privileges for ptys, but some need it for utmp support). If |
|
|
160 | rxvt-unicode doesn't support the library/setuid helper that your OS |
|
|
161 | needs I'll be happy to assist you in implementing support for it. |
|
|
162 | |
|
|
163 | So, while setuid/setgid operation is supported and not a problem on |
|
|
164 | your typical single-user-no-other-logins unix desktop, always |
|
|
165 | remember that its an awful lot of code, most of which isn't checked |
|
|
166 | for security issues regularly. |
41 | |
167 | |
42 | When I log-in to another system it tells me about missing terminfo data? |
168 | When I log-in to another system it tells me about missing terminfo data? |
43 | The terminal description used by rxvt-unicode is not as widely |
169 | The terminal description used by rxvt-unicode is not as widely |
44 | available as that for xterm, or even rxvt (for which the same |
170 | available as that for xterm, or even rxvt (for which the same |
45 | problem often arises). |
171 | problem often arises). |
… | |
… | |
66 | URxvt.termName: rxvt |
192 | URxvt.termName: rxvt |
67 | |
193 | |
68 | If you don't plan to use rxvt (quite common...) you could also |
194 | If you don't plan to use rxvt (quite common...) you could also |
69 | replace the rxvt terminfo file with the rxvt-unicode one. |
195 | replace the rxvt terminfo file with the rxvt-unicode one. |
70 | |
196 | |
|
|
197 | "tic" outputs some error when compiling the terminfo entry. |
|
|
198 | Most likely it's the empty definition for "enacs=". Just replace it |
|
|
199 | by "enacs=\E[0@" and try again. |
|
|
200 | |
71 | "bash"'s readline does not work correctly under rxvt. |
201 | "bash"'s readline does not work correctly under rxvt. |
72 | I need a termcap file entry. |
202 | I need a termcap file entry. |
73 | One reason you might want this is that some distributions or |
203 | One reason you might want this is that some distributions or |
74 | operating systems still compile some programs using the |
204 | operating systems still compile some programs using the |
75 | long-obsoleted termcap (Fedora Core's bash is one example) and rely |
205 | long-obsoleted termcap library (Fedora Core's bash is one example) |
76 | on a termcap entry for "rxvt-unicode". |
206 | and rely on a termcap entry for "rxvt-unicode". |
77 | |
207 | |
78 | You could use rxvt's termcap entry with resonable results in many |
208 | You could use rxvt's termcap entry with resonable results in many |
79 | cases. You can also create a termcap entry by using terminfo's |
209 | cases. You can also create a termcap entry by using terminfo's |
80 | infocmp program like this: |
210 | infocmp program like this: |
81 | |
211 | |
… | |
… | |
83 | |
213 | |
84 | Or you could use this termcap entry, generated by the command above: |
214 | Or you could use this termcap entry, generated by the command above: |
85 | |
215 | |
86 | rxvt-unicode|rxvt-unicode terminal (X Window System):\ |
216 | rxvt-unicode|rxvt-unicode terminal (X Window System):\ |
87 | :am:bw:eo:km:mi:ms:xn:xo:\ |
217 | :am:bw:eo:km:mi:ms:xn:xo:\ |
88 | :co#80:it#8:li#24:\ |
218 | :co#80:it#8:li#24:lm#0:\ |
89 | :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ |
219 | :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ |
90 | :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\ |
220 | :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\ |
91 | :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=^O:al=\E[L:\ |
221 | :RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:ae=\E(B:al=\E[L:\ |
92 | :as=^N:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:\ |
222 | :as=\E(0:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:\ |
93 | :cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\ |
223 | :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\ |
94 | :ec=\E[%dX:ei=\E[4l:ho=\E[H:i1=\E[?47l\E=\E[?1l:ic=\E[@:\ |
224 | :dl=\E[M:do=^J:ec=\E[%dX:ei=\E[4l:ho=\E[H:\ |
|
|
225 | :i1=\E[?47l\E=\E[?1l:ic=\E[@:im=\E[4h:\ |
95 | :im=\E[4h:is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\ |
226 | :is=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l:\ |
96 | :k0=\E[21~:k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:\ |
227 | :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\ |
97 | :k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:\ |
228 | :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kD=\E[3~:\ |
98 | :kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:\ |
229 | :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:\ |
99 | :ke=\E[?1l\E>:kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\ |
230 | :kh=\E[7~:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\ |
100 | :ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:\ |
231 | :mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:nd=\E[C:rc=\E8:\ |
101 | :nd=\E[C:rc=\E8:sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:\ |
232 | :sc=\E7:se=\E[27m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ |
102 | :st=\EH:ta=^I:te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:\ |
233 | :te=\E[r\E[?1049l:ti=\E[?1049h:ue=\E[24m:up=\E[A:\ |
103 | :up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\ |
234 | :us=\E[4m:vb=\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:\ |
104 | :vs=\E[?25h: |
235 | :vs=\E[?25h: |
105 | |
236 | |
106 | Why does "ls" no longer have coloured output? |
237 | Why does "ls" no longer have coloured output? |
107 | The "ls" in the GNU coreutils unfortunately doesn't use terminfo to |
238 | The "ls" in the GNU coreutils unfortunately doesn't use terminfo to |
108 | decide wether a terminal has colour, but uses it's own configuration |
239 | decide wether a terminal has colour, but uses it's own configuration |
… | |
… | |
246 | that doesn't work, you might be forced to use a different font. |
377 | that doesn't work, you might be forced to use a different font. |
247 | |
378 | |
248 | All of this is not a problem when using X11 core fonts, as their |
379 | All of this is not a problem when using X11 core fonts, as their |
249 | bounding box data is correct. |
380 | bounding box data is correct. |
250 | |
381 | |
|
|
382 | On Solaris 9, many line-drawing characters are too wide. |
|
|
383 | Seems to be a known bug, read |
|
|
384 | <http://nixdoc.net/files/forum/about34198.html>. Some people use the |
|
|
385 | following ugly workaround to get non-double-wide-characters working: |
|
|
386 | |
|
|
387 | #define wcwidth(x) wcwidth(x) > 1 ? 1 : wcwidth(x) |
|
|
388 | |
251 | My Compose (Multi_key) key is no longer working. |
389 | My Compose (Multi_key) key is no longer working. |
252 | The most common causes for this are that either your locale is not |
390 | The most common causes for this are that either your locale is not |
253 | set correctly, or you specified a preeditStyle that is not supported |
391 | set correctly, or you specified a preeditStyle that is not supported |
254 | by your input method. For example, if you specified OverTheSpot and |
392 | by your input method. For example, if you specified OverTheSpot and |
255 | your input method (e.g. the default input method handling Compose |
393 | your input method (e.g. the default input method handling Compose |
… | |
… | |
299 | As you might have guessed, FreeBSD does neither define this symobl |
437 | As you might have guessed, FreeBSD does neither define this symobl |
300 | nor does it support it. Instead, it uses it's own internal |
438 | nor does it support it. Instead, it uses it's own internal |
301 | representation of wchar_t. This is, of course, completely fine with |
439 | representation of wchar_t. This is, of course, completely fine with |
302 | respect to standards. |
440 | respect to standards. |
303 | |
441 | |
|
|
442 | However, that means rxvt-unicode only works in "POSIX", "ISO-8859-1" |
|
|
443 | and "UTF-8" locales under FreeBSD (which all use Unicode as wchar_t. |
|
|
444 | |
304 | However, "__STDC_ISO_10646__" is the only sane way to support |
445 | "__STDC_ISO_10646__" is the only sane way to support multi-language |
305 | multi-language apps in an OS, as using a locale-dependent (and |
446 | apps in an OS, as using a locale-dependent (and non-standardized) |
306 | non-standardized) representation of wchar_t makes it impossible to |
447 | representation of wchar_t makes it impossible to convert between |
307 | convert between wchar_t (as used by X11 and your applications) and |
448 | wchar_t (as used by X11 and your applications) and any other |
308 | any other encoding without implementing OS-specific-wrappers for |
449 | encoding without implementing OS-specific-wrappers for each and |
309 | each and every locale. There simply are no APIs to convert wchar_t |
450 | every locale. There simply are no APIs to convert wchar_t into |
310 | into anything except the current locale encoding. |
451 | anything except the current locale encoding. |
311 | |
452 | |
312 | Some applications (such as the formidable mlterm) work around this |
453 | Some applications (such as the formidable mlterm) work around this |
313 | by carrying their own replacement functions for character set |
454 | by carrying their own replacement functions for character set |
314 | handling with them, and either implementing OS-dependent hacks or |
455 | handling with them, and either implementing OS-dependent hacks or |
315 | doing multiple conversions (which is slow and unreliable in case the |
456 | doing multiple conversions (which is slow and unreliable in case the |
… | |
… | |
317 | emulator). |
458 | emulator). |
318 | |
459 | |
319 | The rxvt-unicode author insists that the right way to fix this is in |
460 | The rxvt-unicode author insists that the right way to fix this is in |
320 | the system libraries once and for all, instead of forcing every app |
461 | the system libraries once and for all, instead of forcing every app |
321 | to carry complete replacements for them :) |
462 | to carry complete replacements for them :) |
|
|
463 | |
|
|
464 | I use Solaris 9 and it doesn't compile/work/etc. |
|
|
465 | Try the diff in doc/solaris9.patch as a base. It fixes the worst |
|
|
466 | problems with "wcwidth" and a compile problem. |
|
|
467 | |
|
|
468 | How can I use rxvt-unicode under cygwin? |
|
|
469 | rxvt-unicode should compile and run out of the box on cygwin, using |
|
|
470 | the X11 libraries that come with cygwin. libW11 emulation is no |
|
|
471 | longer supported (and makes no sense, either, as it only supported a |
|
|
472 | single font). I recommend starting the X-server in "-multiwindow" or |
|
|
473 | "-rootless" mode instead, which will result in similar look&feel as |
|
|
474 | the old libW11 emulation. |
|
|
475 | |
|
|
476 | At the time of this writing, cygwin didn't seem to support any |
|
|
477 | multi-byte encodings (you might try "LC_CTYPE=C-UTF-8"), so you are |
|
|
478 | likely limited to 8-bit encodings. |
322 | |
479 | |
323 | How does rxvt-unicode determine the encoding to use? |
480 | How does rxvt-unicode determine the encoding to use? |
324 | Is there an option to switch encodings? |
481 | Is there an option to switch encodings? |
325 | Unlike some other terminals, rxvt-unicode has no encoding switch, |
482 | Unlike some other terminals, rxvt-unicode has no encoding switch, |
326 | and no specific "utf-8" mode, such as xterm. In fact, it doesn't |
483 | and no specific "utf-8" mode, such as xterm. In fact, it doesn't |
… | |
… | |
438 | it gets worse, as rxvt-unicode then uses 8 bytes per screen cell. |
595 | it gets worse, as rxvt-unicode then uses 8 bytes per screen cell. |
439 | |
596 | |
440 | Can I speed up Xft rendering somehow? |
597 | Can I speed up Xft rendering somehow? |
441 | Yes, the most obvious way to speed it up is to avoid Xft entirely, |
598 | Yes, the most obvious way to speed it up is to avoid Xft entirely, |
442 | as it is simply slow. If you still want Xft fonts you might try to |
599 | as it is simply slow. If you still want Xft fonts you might try to |
443 | disable antialiasing (by appending ":antialiasing=false"), which |
600 | disable antialiasing (by appending ":antialias=false"), which saves |
444 | saves lots of memory and also speeds up rendering considerably. |
601 | lots of memory and also speeds up rendering considerably. |
445 | |
602 | |
446 | Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong? |
603 | Rxvt-unicode doesn't seem to anti-alias its fonts, what is wrong? |
447 | Rxvt-unicode will use whatever you specify as a font. If it needs to |
604 | Rxvt-unicode will use whatever you specify as a font. If it needs to |
448 | fall back to it's default font search list it will prefer X11 core |
605 | fall back to it's default font search list it will prefer X11 core |
449 | fonts, because they are small and fast, and then use Xft fonts. It |
606 | fonts, because they are small and fast, and then use Xft fonts. It |
… | |
… | |
521 | URxvt.color14: #73f7ff |
678 | URxvt.color14: #73f7ff |
522 | URxvt.color7: #e1dddd |
679 | URxvt.color7: #e1dddd |
523 | URxvt.color15: #e1dddd |
680 | URxvt.color15: #e1dddd |
524 | |
681 | |
525 | How can I start rxvtd in a race-free way? |
682 | How can I start rxvtd in a race-free way? |
526 | Despite it's name, rxvtd is not a real daemon, but more like a |
683 | Try "rxvtd -f -o", which tells rxvtd to open the display, create the |
527 | server that answers rxvtc's requests, so it doesn't background |
684 | listening socket and then fork. |
528 | itself. |
|
|
529 | |
|
|
530 | To ensure rxvtd is listening on it's socket, you can use the |
|
|
531 | following method to wait for the startup message before continuing: |
|
|
532 | |
|
|
533 | { rxvtd & } | read |
|
|
534 | |
685 | |
535 | What's with the strange Backspace/Delete key behaviour? |
686 | What's with the strange Backspace/Delete key behaviour? |
536 | Assuming that the physical Backspace key corresponds to the |
687 | Assuming that the physical Backspace key corresponds to the |
537 | BackSpace keysym (not likely for Linux ... see the following |
688 | BackSpace keysym (not likely for Linux ... see the following |
538 | question) there are two standard values that can be used for |
689 | question) there are two standard values that can be used for |
… | |
… | |
1121 | |
1272 | |
1122 | "Ps = 1011" (rxvt) |
1273 | "Ps = 1011" (rxvt) |
1123 | h Scroll to bottom when a key is pressed |
1274 | h Scroll to bottom when a key is pressed |
1124 | l Don't scroll to bottom when a key is pressed |
1275 | l Don't scroll to bottom when a key is pressed |
1125 | |
1276 | |
|
|
1277 | "Ps = 1021" (rxvt) |
|
|
1278 | h Bold/italic implies high intensity (see option -is) |
|
|
1279 | l Font styles have no effect on intensity (Compile styles) |
|
|
1280 | |
1126 | "Ps = 1047" |
1281 | "Ps = 1047" |
1127 | h Use Alternate Screen Buffer |
1282 | h Use Alternate Screen Buffer |
1128 | l Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it |
1283 | l Use Normal Screen Buffer - clear Alternate Screen Buffer if returning from it |
1129 | |
1284 | |
1130 | "Ps = 1048" |
1285 | "Ps = 1048" |
… | |
… | |
1155 | Ps = 13 Change colour of mouse foreground to Pt |
1310 | Ps = 13 Change colour of mouse foreground to Pt |
1156 | Ps = 17 Change colour of highlight characters to Pt |
1311 | Ps = 17 Change colour of highlight characters to Pt |
1157 | Ps = 18 Change colour of bold characters to Pt |
1312 | Ps = 18 Change colour of bold characters to Pt |
1158 | Ps = 19 Change colour of underlined characters to Pt |
1313 | Ps = 19 Change colour of underlined characters to Pt |
1159 | Ps = 20 Change default background to Pt |
1314 | Ps = 20 Change default background to Pt |
1160 | Ps = 39 Change default foreground colour to Pt rxvt compile-time option |
1315 | Ps = 39 Change default foreground colour to Pt. |
1161 | Ps = 46 Change Log File to Pt unimplemented |
1316 | Ps = 46 Change Log File to Pt unimplemented |
1162 | Ps = 49 Change default background colour to Pt rxvt compile-time option |
1317 | Ps = 49 Change default background colour to Pt. |
1163 | Ps = 50 Set fontset to Pt, with the following special values of Pt (rxvt) #+n change up n #-n change down n if n is missing of 0, a value of 1 is used empty change to font0 n change to font n |
1318 | Ps = 50 Set fontset to Pt, with the following special values of Pt (rxvt) #+n change up n #-n change down n if n is missing of 0, a value of 1 is used empty change to font0 n change to font n |
1164 | Ps = 55 Log all scrollback buffer and all of screen to Pt |
1319 | Ps = 55 Log all scrollback buffer and all of screen to Pt |
1165 | Ps = 701 Change current locale to Pt, or, if Pt is ?, return the current locale (rxvt extension) |
1320 | Ps = 701 Change current locale to Pt, or, if Pt is ?, return the current locale (Compile frills). |
1166 | Ps = 703 Menubar command Pt rxvt compile-time option (rxvt-unicode extension) |
1321 | Ps = 703 Menubar command Pt (Compile menubar). |
1167 | Ps = 704 Change colour of italic characters to Pt |
1322 | Ps = 704 Change colour of italic characters to Pt |
1168 | Ps = 705 Change background pixmap tint colour to Pt |
1323 | Ps = 705 Change background pixmap tint colour to Pt (Compile transparency). |
1169 | Ps = 710 Set normal fontset to Pt. Same as Ps = 50. |
1324 | Ps = 710 Set normal fontset to Pt. Same as Ps = 50. |
1170 | Ps = 711 Set bold fontset to Pt. Similar to Ps = 50. |
1325 | Ps = 711 Set bold fontset to Pt. Similar to Ps = 50 (Compile styles). |
1171 | Ps = 712 Set italic fontset to Pt. Similar to Ps = 50. |
1326 | Ps = 712 Set italic fontset to Pt. Similar to Ps = 50 (Compile styles). |
1172 | Ps = 713 Set bold-italic fontset to Pt. Similar to Ps = 50. |
1327 | Ps = 713 Set bold-italic fontset to Pt. Similar to Ps = 50 (Compile styles). |
|
|
1328 | Ps = 720 Move viewing window up by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills). |
|
|
1329 | Ps = 721 Move viewing window down by Pt lines, or clear scrollback buffer if Pt = 0 (Compile frills). |
|
|
1330 | Ps = 777 Call the perl extension with the given string, which should be of the form extension:parameters (Compile perl). |
1173 | |
1331 | |
1174 | |
1332 | |
1175 | |
1333 | |
1176 | menuBar |
1334 | menuBar |
1177 | The exact syntax used is *almost* solidified. In the menus, DON'T try to |
1335 | The exact syntax used is *almost* solidified. In the menus, DON'T try to |
… | |
… | |
1642 | XK_KP_8 8 ESC O x |
1800 | XK_KP_8 8 ESC O x |
1643 | XK_KP_9 9 ESC O y |
1801 | XK_KP_9 9 ESC O y |
1644 | |
1802 | |
1645 | CONFIGURE OPTIONS |
1803 | CONFIGURE OPTIONS |
1646 | General hint: if you get compile errors, then likely your configuration |
1804 | General hint: if you get compile errors, then likely your configuration |
1647 | hasn't been tested well. Either try with --enable-everything or use the |
1805 | hasn't been tested well. Either try with "--enable-everything" or use |
1648 | ./reconf script as a base for experiments. ./reconf is used by myself, |
1806 | the ./reconf script as a base for experiments. ./reconf is used by |
1649 | so it should generally be a working config. Of course, you should always |
1807 | myself, so it should generally be a working config. Of course, you |
1650 | report when a combination doesn't work, so it can be fixed. Marc Lehmann |
1808 | should always report when a combination doesn't work, so it can be |
1651 | <rxvt@schmorp.de>. |
1809 | fixed. Marc Lehmann <rxvt@schmorp.de>. |
|
|
1810 | |
|
|
1811 | All |
1652 | |
1812 | |
1653 | --enable-everything |
1813 | --enable-everything |
1654 | Add support for all non-multichoice options listed in "./configure |
1814 | Add (or remove) support for all non-multichoice options listed in |
1655 | --help". Note that unlike other enable options this is order |
1815 | "./configure --help". |
1656 | dependant. You can specify this and then disable options which this |
|
|
1657 | enables by *following* this with the appropriate commands. |
|
|
1658 | |
1816 | |
1659 | --enable-xft |
1817 | You can specify this and then disable options you do not like by |
|
|
1818 | *following* this with the appropriate "--disable-..." arguments, or |
|
|
1819 | you can start with a minimal configuration by specifying |
|
|
1820 | "--disable-everything" and than adding just the "--enable-..." |
|
|
1821 | arguments you want. |
|
|
1822 | |
|
|
1823 | --enable-xft (default: enabled) |
1660 | Add support for Xft (anti-aliases, among others) fonts. Xft fonts |
1824 | Add support for Xft (anti-aliases, among others) fonts. Xft fonts |
1661 | are slower and require lots of memory, but as long as you don't use |
1825 | are slower and require lots of memory, but as long as you don't use |
1662 | them, you don't pay for them. |
1826 | them, you don't pay for them. |
1663 | |
1827 | |
1664 | --enable-font-styles |
1828 | --enable-font-styles (default: on) |
1665 | Add support for bold, *italic* and *bold italic* font styles. The |
1829 | Add support for bold, *italic* and *bold italic* font styles. The |
1666 | fonts can be set manually or automatically. |
1830 | fonts can be set manually or automatically. |
1667 | |
1831 | |
1668 | --with-codesets=NAME,... |
1832 | --with-codesets=NAME,... (default: all) |
1669 | Compile in support for additional codeset (encoding) groups (eu, vn |
1833 | Compile in support for additional codeset (encoding) groups ("eu", |
1670 | are always compiled in, which includes most 8-bit character sets). |
1834 | "vn" are always compiled in, which includes most 8-bit character |
1671 | These codeset tables are currently only used for driving X11 core |
1835 | sets). These codeset tables are used for driving X11 core fonts, |
1672 | fonts, they are not required for Xft fonts. Compiling them in will |
1836 | they are not required for Xft fonts, although having them compiled |
1673 | make your binary bigger (together about 700kB), but it doesn't |
1837 | in lets rxvt-unicode choose replacement fonts more intelligently. |
1674 | increase memory usage unless you use an X11 font requiring one of |
1838 | Compiling them in will make your binary bigger (all of together cost |
1675 | these encodings. |
1839 | about 700kB), but it doesn't increase memory usage unless you use a |
|
|
1840 | font requiring one of these encodings. |
1676 | |
1841 | |
1677 | all all available codeset groups |
1842 | all all available codeset groups |
1678 | zh common chinese encodings |
1843 | zh common chinese encodings |
1679 | zh_ext rarely used but very big chinese encodigs |
1844 | zh_ext rarely used but very big chinese encodigs |
1680 | jp common japanese encodings |
1845 | jp common japanese encodings |
1681 | jp_ext rarely used but big japanese encodings |
1846 | jp_ext rarely used but big japanese encodings |
1682 | kr korean encodings |
1847 | kr korean encodings |
1683 | |
1848 | |
1684 | --enable-xim |
1849 | --enable-xim (default: on) |
1685 | Add support for XIM (X Input Method) protocol. This allows using |
1850 | Add support for XIM (X Input Method) protocol. This allows using |
1686 | alternative input methods (e.g. kinput2) and will also correctly set |
1851 | alternative input methods (e.g. kinput2) and will also correctly set |
1687 | up the input for people using dead keys or compose keys. |
1852 | up the input for people using dead keys or compose keys. |
1688 | |
1853 | |
1689 | --enable-unicode3 |
1854 | --enable-unicode3 (default: off) |
1690 | Enable direct support for displaying unicode codepoints above 65535 |
1855 | Enable direct support for displaying unicode codepoints above 65535 |
1691 | (the basic multilingual page). This increases storage requirements |
1856 | (the basic multilingual page). This increases storage requirements |
1692 | per character from 2 to 4 bytes. X11 fonts do not yet support these |
1857 | per character from 2 to 4 bytes. X11 fonts do not yet support these |
1693 | extra characters, but Xft does. |
1858 | extra characters, but Xft does. |
1694 | |
1859 | |
… | |
… | |
1696 | even without this flag, but the number of such characters is limited |
1861 | even without this flag, but the number of such characters is limited |
1697 | to a view thousand (shared with combining characters, see next |
1862 | to a view thousand (shared with combining characters, see next |
1698 | switch), and right now rxvt-unicode cannot display them |
1863 | switch), and right now rxvt-unicode cannot display them |
1699 | (input/output and cut&paste still work, though). |
1864 | (input/output and cut&paste still work, though). |
1700 | |
1865 | |
1701 | --enable-combining |
1866 | --enable-combining (default: on) |
1702 | Enable automatic composition of combining characters into composite |
1867 | Enable automatic composition of combining characters into composite |
1703 | characters. This is required for proper viewing of text where |
1868 | characters. This is required for proper viewing of text where |
1704 | accents are encoded as seperate unicode characters. This is done by |
1869 | accents are encoded as seperate unicode characters. This is done by |
1705 | using precomposited characters when available or creating new |
1870 | using precomposited characters when available or creating new |
1706 | pseudo-characters when no precomposed form exists. |
1871 | pseudo-characters when no precomposed form exists. |
… | |
… | |
1715 | |
1880 | |
1716 | The combining table also contains entries for arabic presentation |
1881 | The combining table also contains entries for arabic presentation |
1717 | forms, but these are not currently used. Bug me if you want these to |
1882 | forms, but these are not currently used. Bug me if you want these to |
1718 | be used (and tell me how these are to be used...). |
1883 | be used (and tell me how these are to be used...). |
1719 | |
1884 | |
1720 | --enable-fallback(=CLASS) |
1885 | --enable-fallback(=CLASS) (default: Rxvt) |
1721 | When reading resource settings, also read settings for class CLASS |
1886 | When reading resource settings, also read settings for class CLASS. |
1722 | (default: Rxvt). To disable resource fallback use |
1887 | To disable resource fallback use --disable-fallback. |
1723 | --disable-fallback. |
|
|
1724 | |
1888 | |
1725 | --with-res-name=NAME |
1889 | --with-res-name=NAME (default: urxvt) |
1726 | Use the given name (default: urxvt) as default application name when |
1890 | Use the given name as default application name when reading |
1727 | reading resources. Specify --with-res-name=rxvt to replace rxvt. |
1891 | resources. Specify --with-res-name=rxvt to replace rxvt. |
1728 | |
1892 | |
1729 | --with-res-class=CLASS |
1893 | --with-res-class=CLASS /default: URxvt) |
1730 | Use the given class (default: URxvt) as default application class |
1894 | Use the given class as default application class when reading |
1731 | when reading resources. Specify --with-res-class=Rxvt to replace |
1895 | resources. Specify --with-res-class=Rxvt to replace rxvt. |
1732 | rxvt. |
|
|
1733 | |
1896 | |
1734 | --enable-utmp |
1897 | --enable-utmp (default: on) |
1735 | Write user and tty to utmp file (used by programs like w) at start |
1898 | Write user and tty to utmp file (used by programs like w) at start |
1736 | of rxvt execution and delete information when rxvt exits. |
1899 | of rxvt execution and delete information when rxvt exits. |
1737 | |
1900 | |
1738 | --enable-wtmp |
1901 | --enable-wtmp (default: on) |
1739 | Write user and tty to wtmp file (used by programs like last) at |
1902 | Write user and tty to wtmp file (used by programs like last) at |
1740 | start of rxvt execution and write logout when rxvt exits. This |
1903 | start of rxvt execution and write logout when rxvt exits. This |
1741 | option requires --enable-utmp to also be specified. |
1904 | option requires --enable-utmp to also be specified. |
1742 | |
1905 | |
1743 | --enable-lastlog |
1906 | --enable-lastlog (default: on) |
1744 | Write user and tty to lastlog file (used by programs like lastlogin) |
1907 | Write user and tty to lastlog file (used by programs like lastlogin) |
1745 | at start of rxvt execution. This option requires --enable-utmp to |
1908 | at start of rxvt execution. This option requires --enable-utmp to |
1746 | also be specified. |
1909 | also be specified. |
1747 | |
1910 | |
1748 | --enable-xpm-background |
1911 | --enable-xpm-background (default: on) |
1749 | Add support for XPM background pixmaps. |
1912 | Add support for XPM background pixmaps. |
1750 | |
1913 | |
1751 | --enable-transparency |
1914 | --enable-transparency (default: on) |
1752 | Add support for inheriting parent backgrounds thus giving a fake |
1915 | Add support for inheriting parent backgrounds thus giving a fake |
1753 | transparency to the term. |
1916 | transparency to the term. |
1754 | |
1917 | |
1755 | --enable-fading |
1918 | --enable-fading (default: on) |
1756 | Add support for fading the text when focus is lost. |
1919 | Add support for fading the text when focus is lost (requires |
|
|
1920 | "--enable-transparency"). |
1757 | |
1921 | |
1758 | --enable-tinting |
1922 | --enable-tinting (default: on) |
1759 | Add support for tinting of transparent backgrounds. |
1923 | Add support for tinting of transparent backgrounds (requires |
|
|
1924 | "--enable-transparency"). |
1760 | |
1925 | |
1761 | --enable-menubar |
1926 | --enable-menubar (default: off) [DEPRECATED] |
1762 | Add support for our menu bar system (this interacts badly with |
1927 | Add support for our menu bar system (this interacts badly with |
1763 | dynamic locale switching currently). |
1928 | dynamic locale switching currently). This option is DEPRECATED and |
|
|
1929 | will be removed in the future. |
1764 | |
1930 | |
1765 | --enable-rxvt-scroll |
1931 | --enable-rxvt-scroll (default: on) |
1766 | Add support for the original rxvt scrollbar. |
1932 | Add support for the original rxvt scrollbar. |
1767 | |
1933 | |
1768 | --enable-next-scroll |
1934 | --enable-next-scroll (default: on) |
1769 | Add support for a NeXT-like scrollbar. |
1935 | Add support for a NeXT-like scrollbar. |
1770 | |
1936 | |
1771 | --enable-xterm-scroll |
1937 | --enable-xterm-scroll (default: on) |
1772 | Add support for an Xterm-like scrollbar. |
1938 | Add support for an Xterm-like scrollbar. |
1773 | |
1939 | |
1774 | --enable-plain-scroll |
1940 | --enable-plain-scroll (default: on) |
1775 | Add support for a very unobtrusive, plain-looking scrollbar that is |
1941 | Add support for a very unobtrusive, plain-looking scrollbar that is |
1776 | the favourite of the rxvt-unicode author, having used it for many |
1942 | the favourite of the rxvt-unicode author, having used it for many |
1777 | years. |
1943 | years. |
1778 | |
1944 | |
1779 | --enable-half-shadow |
1945 | --enable-half-shadow (default: off) |
1780 | Make shadows on the scrollbar only half the normal width & height. |
1946 | Make shadows on the scrollbar only half the normal width & height. |
1781 | only applicable to rxvt scrollbars. |
1947 | only applicable to rxvt scrollbars. |
1782 | |
1948 | |
1783 | --enable-ttygid |
1949 | --enable-ttygid (default: off) |
1784 | Change tty device setting to group "tty" - only use this if your |
1950 | Change tty device setting to group "tty" - only use this if your |
1785 | system uses this type of security. |
1951 | system uses this type of security. |
1786 | |
1952 | |
1787 | --disable-backspace-key |
1953 | --disable-backspace-key |
1788 | Disable any handling of the backspace key by us - let the X server |
1954 | Removes any handling of the backspace key by us - let the X server |
1789 | do it. |
1955 | do it. |
1790 | |
1956 | |
1791 | --disable-delete-key |
1957 | --disable-delete-key |
1792 | Disable any handling of the delete key by us - let the X server do |
1958 | Removes any handling of the delete key by us - let the X server do |
1793 | it. |
1959 | it. |
1794 | |
1960 | |
1795 | --disable-resources |
1961 | --disable-resources |
1796 | Remove all resources checking. |
1962 | Removes any support for resource checking. |
1797 | |
1963 | |
1798 | --enable-xgetdefault |
1964 | --enable-xgetdefault |
1799 | Make resources checking via XGetDefault() instead of our small |
1965 | Make resources checking via XGetDefault() instead of our small |
1800 | version which only checks ~/.Xdefaults, or if that doesn't exist |
1966 | version which only checks ~/.Xdefaults, or if that doesn't exist |
1801 | then ~/.Xresources. |
1967 | then ~/.Xresources. |
1802 | |
1968 | |
1803 | Please note that nowadays, things like XIM will automatically pull |
1969 | Please note that nowadays, things like XIM will automatically pull |
1804 | in and use the full X resource manager, so the overhead of using it |
1970 | in and use the full X resource manager, so the overhead of using it |
1805 | might be very small, if nonexistant. |
1971 | might be very small, if nonexistant. |
1806 | |
1972 | |
1807 | --enable-strings |
1973 | --enable-strings (default: off) |
1808 | Add support for our possibly faster memset() function and other |
1974 | Add support for our possibly faster memset() function and other |
1809 | various routines, overriding your system's versions which may have |
1975 | various routines, overriding your system's versions which may have |
1810 | been hand-crafted in assembly or may require extra libraries to link |
1976 | been hand-crafted in assembly or may require extra libraries to link |
1811 | in. (this breaks ANSI-C rules and has problems on many GNU/Linux |
1977 | in. (this breaks ANSI-C rules and has problems on many GNU/Linux |
1812 | systems). |
1978 | systems). |
1813 | |
1979 | |
1814 | --disable-swapscreen |
1980 | --disable-swapscreen |
1815 | Remove support for swap screen. |
1981 | Remove support for secondary/swap screen. |
1816 | |
1982 | |
1817 | --enable-frills |
1983 | --enable-frills (default: on) |
1818 | Add support for many small features that are not essential but nice |
1984 | Add support for many small features that are not essential but nice |
1819 | to have. Normally you want this, but for very small binaries you may |
1985 | to have. Normally you want this, but for very small binaries you may |
1820 | want to disable this. |
1986 | want to disable this. |
1821 | |
1987 | |
1822 | A non-exhaustive list of features enabled by "--enable-frills" |
1988 | A non-exhaustive list of features enabled by "--enable-frills" |
1823 | (possibly in combination with other switches) is: |
1989 | (possibly in combination with other switches) is: |
1824 | |
1990 | |
1825 | MWM-hints |
1991 | MWM-hints |
|
|
1992 | EWMH-hints (pid, utf8 names) and protocols (ping) |
1826 | seperate underline colour |
1993 | seperate underline colour (-underlineColor) |
1827 | settable border widths and borderless switch |
1994 | settable border widths and borderless switch (-w, -b, -bl) |
1828 | settable extra linespacing |
1995 | settable extra linespacing /-lsp) |
1829 | extra window properties (e.g. UTF-8 window names and PID) |
|
|
1830 | iso-14755-2 and -3, and visual feedback |
1996 | iso-14755-2 and -3, and visual feedback |
1831 | backindex and forwardindex escape sequence |
1997 | backindex and forwardindex escape sequence |
1832 | window op and locale change escape sequences |
1998 | window op and some xterm/OSC escape sequences |
1833 | tripleclickwords |
1999 | tripleclickwords (-tcw) |
1834 | settable insecure mode |
2000 | settable insecure mode (-insecure) |
1835 | keysym remapping support |
2001 | keysym remapping support |
|
|
2002 | cursor blinking and underline cursor (-cb, -uc) |
|
|
2003 | XEmbed support (-embed) |
|
|
2004 | user-pty (-pty-fd) |
|
|
2005 | hold on exit (-hold) |
|
|
2006 | skip builtin block graphics (-sbg) |
|
|
2007 | sgr modes 90..97 and 100..107 |
1836 | |
2008 | |
1837 | --enable-iso14755 |
2009 | --enable-iso14755 (default: on) |
1838 | Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt). |
2010 | Enable extended ISO 14755 support (see rxvt(1), or doc/rxvt.1.txt). |
1839 | Basic support (section 5.1) is enabled by "--enable-frills", while |
2011 | Basic support (section 5.1) is enabled by "--enable-frills", while |
1840 | support for 5.2, 5.3 and 5.4 is enabled with this switch. |
2012 | support for 5.2, 5.3 and 5.4 is enabled with this switch. |
1841 | |
2013 | |
1842 | --enable-keepscrolling |
2014 | --enable-keepscrolling (default: on) |
1843 | Add support for continual scrolling of the display when you hold the |
2015 | Add support for continual scrolling of the display when you hold the |
1844 | mouse button down on a scrollbar arrow. |
2016 | mouse button down on a scrollbar arrow. |
1845 | |
2017 | |
1846 | --enable-mousewheel |
2018 | --enable-mousewheel (default: on) |
1847 | Add support for scrolling via mouse wheel or buttons 4 & 5. |
2019 | Add support for scrolling via mouse wheel or buttons 4 & 5. |
1848 | |
2020 | |
1849 | --enable-slipwheeling |
2021 | --enable-slipwheeling (default: on) |
1850 | Add support for continual scrolling (using the mouse wheel as an |
2022 | Add support for continual scrolling (using the mouse wheel as an |
1851 | accelerator) while the control key is held down. This option |
2023 | accelerator) while the control key is held down. This option |
1852 | requires --enable-mousewheel to also be specified. |
2024 | requires --enable-mousewheel to also be specified. |
1853 | |
2025 | |
1854 | --disable-new-selection |
2026 | --disable-new-selection |
1855 | Remove support for mouse selection style like that of xterm. |
2027 | Remove support for mouse selection style like that of xterm. |
1856 | |
2028 | |
1857 | --enable-dmalloc |
2029 | --enable-dmalloc (default: off) |
1858 | Use Gray Watson's malloc - which is good for debugging See |
2030 | Use Gray Watson's malloc - which is good for debugging See |
1859 | http://www.letters.com/dmalloc/ for details If you use either this |
2031 | http://www.letters.com/dmalloc/ for details If you use either this |
1860 | or the next option, you may need to edit src/Makefile after |
2032 | or the next option, you may need to edit src/Makefile after |
1861 | compiling to point DINCLUDE and DLIB to the right places. |
2033 | compiling to point DINCLUDE and DLIB to the right places. |
1862 | |
2034 | |
1863 | You can only use either this option and the following (should you |
2035 | You can only use either this option and the following (should you |
1864 | use either) . |
2036 | use either) . |
1865 | |
2037 | |
1866 | --enable-dlmalloc |
2038 | --enable-dlmalloc (default: off) |
1867 | Use Doug Lea's malloc - which is good for a production version See |
2039 | Use Doug Lea's malloc - which is good for a production version See |
1868 | <http://g.oswego.edu/dl/html/malloc.html> for details. |
2040 | <http://g.oswego.edu/dl/html/malloc.html> for details. |
1869 | |
2041 | |
1870 | --enable-smart-resize |
2042 | --enable-smart-resize (default: on) |
1871 | Add smart growth/shrink behaviour when changing font size via from |
2043 | Add smart growth/shrink behaviour when changing font size via hot |
1872 | hot keys. This should keep in a fixed position the rxvt corner which |
2044 | keys. This should keep the window corner which is closest to a |
1873 | is closest to a corner of the screen. |
2045 | corner of the screen in a fixed position. |
1874 | |
2046 | |
1875 | --enable-cursor-blink |
|
|
1876 | Add support for a blinking cursor. |
|
|
1877 | |
|
|
1878 | --enable-pointer-blank |
2047 | --enable-pointer-blank (default: on) |
1879 | Add support to have the pointer disappear when typing or inactive. |
2048 | Add support to have the pointer disappear when typing or inactive. |
1880 | |
2049 | |
1881 | --with-name=NAME |
2050 | --enable-perl (default: off) |
|
|
2051 | Enable an embedded perl interpreter. See the rxvtperl(3) manpage |
|
|
2052 | (doc/rxvtperl.txt) for more info on this feature, or the files in |
|
|
2053 | src/perl-ext/ for the extensions that are installed by default. The |
|
|
2054 | perl interpreter that is used can be specified via the "PERL" |
|
|
2055 | environment variable when running configure. |
|
|
2056 | |
|
|
2057 | --with-name=NAME (default: urxvt) |
1882 | Set the basename for the installed binaries (default: "urxvt", |
2058 | Set the basename for the installed binaries, resulting in "urxvt", |
1883 | resulting in "urxvt", "urxvtd" etc.). Specify "--with-name=rxvt" to |
2059 | "urxvtd" etc.). Specify "--with-name=rxvt" to replace with "rxvt". |
1884 | replace with "rxvt". |
|
|
1885 | |
2060 | |
1886 | --with-term=NAME |
2061 | --with-term=NAME (default: rxvt-unicode) |
1887 | Change the environmental variable for the terminal to NAME (default |
2062 | Change the environmental variable for the terminal to NAME. |
1888 | "rxvt-unicode") |
|
|
1889 | |
2063 | |
1890 | --with-terminfo=PATH |
2064 | --with-terminfo=PATH |
1891 | Change the environmental variable for the path to the terminfo tree |
2065 | Change the environmental variable for the path to the terminfo tree |
1892 | to PATH. |
2066 | to PATH. |
1893 | |
2067 | |