[ViewVC] Diff of: cvs/rxvt-unicode/src/feature.h

Comparing rxvt-unicode/src/feature.h (file contents):
Revision 1.27 by root, Tue Dec 27 12:23:37 2005 UTC vs.
Revision 1.51 by root, Tue Jan 9 16:21:15 2007 UTC

 #ifndef XAPPLOADDIR
 # define XAPPLOADDIR		X11LIBDIR "/app-defaults"
 # define XAPPLOADDIRLOCALE	X11LIBDIR "/%s/app-defaults"
 #endif
+/*-------------------------------SECURITY-------------------------------*/
+/*
+ * Default mode to restore when releasing the PTS device. It is relaxed to be
+ * compatible with most systems, change it to a more secure value if your
+ * system supports it (0640 for example).
+ */
+#define RESTORE_TTY_MODE 0666
+/*
+ * Define if you want to use a separate process for pty/tty handling
+ * when running setuid/setgid. You need this when making it setuid/setgid.
+ */
+#define PTYTTY_HELPER 1
 /*-----------------------SCREEN OPTIONS AND COLOURS---------------------*/
 /*
  * NOTE:
  *
- * Most of these configuration options have not been tested within the new
+ * Some of these configuration options have not been tested within the new
  * rxvt-unicode framework. Changing them should work, might have no effect,
  * destroy your disks or have any other effects. You may freely try (and
  * report bugs, too!), but don't _expect_ them to work.
  */
 /*
- * Define the name of the environment variable to be used in
+ * Forcefully disable double-buffering for xft. On some card/driver combination
- * addition to the "PATH" environment and the `path' resource.
+ * enabling it slightly decreases performance, on most it greatly helps it.
- * Usually it should point to where you keep your background pixmaps and/or
+ * The slowdown is small, so it should normally be enabled.
- * your menu files
  */
-#define PATH_ENV	"RXVTPATH"
+/* #define FORCE_UNBUFFERED_XFT */
+/*
+ * The cursor blink interval, in seconds.
+ */
+#define CURSOR_BLINK_INTERVAL 0.5
+/*
+ * The text blink interval, in seconds.
+ */
+#define TEXT_BLINK_INTERVAL CURSOR_BLINK_INTERVAL
 /*
  * Avoid enabling the colour cursor (-cr, cursorColor, cursorColor2)
  */
 /* #define NO_CURSORCOLOR */
-/*
- * Suppress use of BOLD and BLINK attributes for setting bright foreground
- * and background, respectively.  Simulate BOLD using colorBD or
- * overstrike characters.
- */
-/* #define NO_BRIGHTCOLOR */
 /*
  * Make colours match xterm colours instead of `traditional' rxvt colours
  */
 #define XTERM_COLORS
 #define MAX_SAVELINES   10000000
 /*
  * Define default colours for certain items.  If you have a low colour
  * display, then consider using colours which are already pre-allocated:
+ *
  *   Black		(#000000)
- *   Red3		(#CD0000)	+ these
+ *   Red3		(#CD0000)
- *   Green3		(#00CD00)	+ colours
+ *   Green3		(#00CD00)
- *   Yellow3		(#CDCD00)	+ are
+ *   Yellow3		(#CDCD00)
- *   Blue3		(#0000CD)	+ not
+ *   Blue3		(#0000CD)
- *   Magenta3		(#CD00CD)	+ pre-allocated
+ *   Magenta3		(#CD00CD)
- *   Cyan3		(#00CDCD)	+ if
+ *   Cyan3		(#00CDCD)
- *   AntiqueWhite	(#FAEBD7)	+ NO_BRIGHTCOLOR
+ *   AntiqueWhite	(#FAEBD7)
- *   Grey25		(#404040)	+ defined
+ *   Grey25		(#404040)
  *   Red		(#FF0000)
  *   Green		(#00FF00)
  *   Yellow		(#FFFF00)
  *   Blue		(#0000FF)
  *   Magenta		(#FF00FF)
  *   Cyan		(#00FFFF)
  *   White		(#FFFFFF)
  */
 /* These colours MUST be defined */
-#define COLOR_FOREGROUND	"Black"
+#define COLOR_FOREGROUND	"rgb:00/00/00"
-#define COLOR_BACKGROUND	"White"
+#define COLOR_BACKGROUND	"rgb:ff/ff/ff"
-#define COLOR_SCROLLBAR		"#B2B2B2"	/* scrollColor match Netscape */
+#define COLOR_SCROLLBAR		"rgb:b2/b2/b2"	/* scrollColor match Netscape */
-#define COLOR_SCROLLTROUGH	"#969696"
+#define COLOR_SCROLLTROUGH	"rgb:96/96/96"
 /*
  * The cursor colours are special.  Be very careful about setting these:
  * foreground/background colours may be modified by command line or resources
  * prior to this allocation.  Also, they are not valid if NO_CURSORCOLOR is
 /*
  * Define to remove support for XCopyArea () support.  XCopyArea () is useful
  * for scrolling on non-local X displays
  */
-#undef NO_SLOW_LINK_SUPPORT
+#define NO_SLOW_LINK_SUPPORT
 /*
  * Printer pipe which will be used for emulation of attached vt100 printer
  */
 #define PRINTPIPE	"lpr"
 /*
  * Allow 80/132 mode switching on startup
  */
 /* #define ALLOW_132_MODE */
-/*------------------------------RESOURCES-------------------------------*/
-/*
- * Define to find installed application defaults for rxvt
- * Only if USE_XGETDEFAULT is not defined.
- */
-#define USE_XAPPLOADDIR
-/*
- * Add support for the Offix DND (Drag 'n' Drop) protocol
- */
-/* #define OFFIX_DND */
 /*---------------------------------KEYS---------------------------------*/
 /*
  * Define defaults for backspace and delete keys - unless they have been
  * configured out with --disable-backspace-key / --disable-delete-key
 /* #define LINUX_KEYS */
 /*
  * Enable the keysym resource which allows you to define strings associated
  * with various KeySyms (0xFF00 - 0xFFFF).
- * Only works with the default hand-rolled resources.
+ * Required by perl.
  */
-#if !NO_RESOURCES && ENABLE_FRILLS
+#if ENABLE_FRILLS || ENABLE_PERL
 # define KEYSYM_RESOURCE
 #endif
 /*
  * Modifier/s to use to allow up/down arrows and Prior/Next keys
  * this long after the last mouse click [default: 50 milliseconds]
  */
 #define MOUSE_THRESHOLD		50
 /*
- * If mouse wheel is defined, then scrolling is by 5 lines (or 1 line
- * if the shift key is down).  Scrolling can be smooth or jump scrolling
- */
-#define JUMP_MOUSE_WHEEL
-/*
  * Set delay periods for continuous scrolling with scrollbar buttons
  */
 /* #define SCROLLBAR_INITIAL_DELAY 0.33 */
 /* #define SCROLLBAR_CONTINUOUS_DELAY 0.05 */
  */
 #define SELECTION_SCROLL_LINE_SPEEDUP 3
 /*--------------------------------MISC----------------------------------*/
 /*
- * Disable to reset tty device to pre-incovation state
- */
-#define RESET_TTY_TO_COMMON_DEFAULTS
-/*
- * Only log in wtmp file when we're a login shell (-ls option)
+ * Only log in wtmp and lastlog files when we're a login shell (-ls option)
  */
-#define WTMP_ONLY_ON_LOGIN
+#define LOG_ONLY_ON_LOGIN
 /*--------------------------------BELL----------------------------------*/
 /*
  * Disable all bell indications
  */
 /*
  * Minimum and maximum widths of the scrollbar (all styles)
  */
 #define SB_WIDTH_MINIMUM 	5
 #define SB_WIDTH_MAXIMUM 	100
+/*
+ * rxvt scrollbar shadow width in pixels, must be 1 or 2
+ */
+#define SHADOW_WIDTH 1
 /*
  * When using Rxvt scrollbar, clicking above or below the slider will move
  * 1/4 of the screen height, if possible.  Setting RXVT_SCROLL_FULL will move
  * it one screen height less one line, if possible
 /*
  * (Hops) draw an internal border line on inside edge of the scrollbar
  */
 /* #define SB_BORDER */
-/*------------------------------MENU BAR--------------------------------*/
-/*
- * Choose how many of (experimental) menuBars you want to be able to stack at
- * one time.
- *  A value of 1 disables menuBar stacking.
- *  A value of 0 disables menuBar all together.
- *  Note that the amount of memory overhead is the same for any value >= 2.
- */
-#define MENUBAR_MAX 16
-/*
- * Change the default shadow style
- */
-/* #define MENUBAR_SHADOW_IN */
-/*
- * Change the default shadow style
- */
-#define MENU_SHADOW_IN
 /*---------------------------MULTILINGUAL-------------------------------*/
 /*
  * Allow run-time selection of Meta (Alt) to set the 8th bit on
  */
 #define META8_OPTION
 #define SAVELINES	1000
 /*
  * Provide termcap/terminfo bw support (wrap backwards on cub1)
  */
-#define TERMCAP_HAS_BW
+#define TERMCAP_HAS_BW 1
 /*
- * Some (older, e.g. fvwm 2.2.2) window managers need some time when
- * updating window positions. If transparency isn't working correctly
- * then you might try out this one.
- */
-/* #define WAIT_FOR_WM */
-/*
- * The duration of the visual bell flash in µs. The default of 20ms
+ * The duration of the visual bell flash in s. The default of 20ms
  * corresponds to the delay given in the terminfo flash code.
  */
-#define VISUAL_BELL_DURATION 20000
+#define VISUAL_BELL_DURATION .020
-#endif
+/*--------------------------------OTHER---------------------------------*/
+/*
+ * Enable the linux yield/usleep hack, which can dramatically improve
+ * performance by working around the linux kernel tty ratelimit bug.
+ * Unfortunately, it seems screen is negatively affected by this on some
+ * machines, so it is disabled by default. Use freebsd or any other kernel
+ * that doesn't suffer form this bug and it will be fast either way.
+ *
+ * See command.C for details.
+ */
+#if __linux__
+# define LINUX_YIELD_HACK 0
+#endif
+#endif

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/src/feature.h (file contents): Revision 1.27 by root, Tue Dec 27 12:23:37 2005 UTC vs. Revision 1.51 by root, Tue Jan 9 16:21:15 2007 UTC

Diff Legend

Comparing rxvt-unicode/src/feature.h (file contents):
Revision 1.27 by root, Tue Dec 27 12:23:37 2005 UTC vs.
Revision 1.51 by root, Tue Jan 9 16:21:15 2007 UTC