[ViewVC] Diff of: cvs/rxvt-unicode/src/perl/matcher

Comparing rxvt-unicode/src/perl/matcher (file contents):
Revision 1.20 by sf-exg, Thu Jun 12 06:03:49 2014 UTC vs.
Revision 1.32 by sf-exg, Wed Jul 30 15:22:51 2014 UTC

 #:META:RESOURCE:%.launcher:string:default launcher command
 #:META:RESOURCE:%.button:string:the button, yeah
 #:META:RESOURCE:%.pattern.:string:extra pattern to match
 #:META:RESOURCE:%.launcher.:string:custom launcher for pattern
-#:META:RESOURCE:%.rend.:string:custom rednition for pattern
+#:META:RESOURCE:%.rend.:string:custom rendition for pattern
 =head1 NAME
 matcher - match strings in terminal output and change their rendition
 The launcher can also be overridden on a per-pattern basis.
 It is possible to activate the most recently seen match or a list of matches
 from the keyboard.  Simply bind a keysym to "matcher:last" or
 "matcher:list" as seen in the example below.
+The 'matcher:select' action enables a mode in which it is possible to
+iterate over the matches using the keyboard and either activate them
+or copy them to the clipboard. While the mode is active, normal terminal
+input/output is suspended and the following bindings are recognized:
+=over 4
+=item C<Up>
+Search for a match upwards.
+=item C<Down>
+Search for a match downwards.
+=item C<Home>
+Jump to the topmost match.
+=item C<End>
+Jump to the bottommost match.
+=item C<Escape>
+Leave the mode and return to the point where search was started.
+=item C<Enter>
+Activate the current match.
+=item C<y>
+Copy the current match to the clipboard.
+=back
 Example: load and use the matcher extension with defaults.
     URxvt.perl-ext:           default,matcher
          \([\w\-\@;\/?:&=%\$.+!*\x27,~#]*\)| # Allow a pair of matched parentheses
          [\w\-\@;\/?:&=%\$+*~]  # exclude some trailing characters (heuristic)
       )+
    }x;
-sub on_key_press {
+sub matchlist_key_press {
    my ($self, $event, $keysym, $octets) = @_;
-   return unless $self->{overlay};
    delete $self->{overlay};
+   $self->disable ("key_press");
    my $i = ($keysym == 96 ? 0 : $keysym - 48);
    if ($i >= 0 && $i < @{ $self->{matches} }) {
       my @exec = @{ $self->{matches}[$i] };
-      shift @exec;
-      $self->exec_async (@exec);
+      $self->exec_async (@exec[5 .. $#exec]);
    }
    1
 }
    if ($action eq "list") {
       $self->matchlist;
    } elsif ($action eq "last") {
       $self->most_recent;
+   } elsif ($action eq "select") {
+      $self->select_enter;
    }
    ()
 }
 sub matchlist {
    my ($self) = @_;
-   @{ $self->{matches} } = ();
+   $self->{matches} = [];
    my $row = $self->nrow - 1;
    while ($row >= 0 && @{ $self->{matches} } < 10) {
       my $line = $self->line ($row);
-      my $text = $line->t;
+      my @matches = $self->find_matches ($row);
-      # FIXME: code duplicated from 'command_for'
-      my @matches;
-      for my $matcher (@{$self->{matchers}}) {
-	 my $launcher = $matcher->[1] || $self->{launcher};
-	 while ($text =~ /$matcher->[0]/g) {
-	    my $match = substr ($text, $-[0], $+[0] - $-[0]);
-	    my @beg = @-;
-	    my @end = @+;
-	    my @exec;
-            if ($launcher !~ /\$/) {
-	       @exec = ($launcher, $match);
-	    } else {
-               @exec = map { s/\$(\d+)|\$\{(\d+)\}/
-                  substr ($text, $beg[$1 || $2], $end[$1 || $2] - $beg[$1 || $2])
-                  /egx; $_ } split /\s+/, $launcher;
-            }
-	    push @matches, [ $beg[0], $match, @exec ];
-	 }
-      }
-      for (sort { $b->[0] <=> $a->[0] } @matches) {
+      for (sort { $b->[0] <=> $a->[0] or $b->[1] <=> $a->[1] } @matches) {
-         shift @$_;
          push @{ $self->{matches} }, $_;
          last if @{ $self->{matches} } == 10;
       }
       $row = $line->beg - 1;
    my $width = 0;
    my $i = 0;
    for my $match (@{ $self->{matches} }) {
-      my $text = $match->[0];
+      my $text = $match->[4];
       my $w = $self->strwidth ("$i-$text");
       $width = $w if $w > $width;
       $i++;
    }
    $width = $self->ncol - 2 if $width > $self->ncol - 2;
    $self->{overlay} = $self->overlay (0, 0, $width, scalar (@{ $self->{matches} }), urxvt::OVERLAY_RSTYLE, 2);
    my $i = 0;
    for my $match (@{ $self->{matches} }) {
-      my $text = $match->[0];
+      my $text = $match->[4];
       $self->{overlay}->set (0, $i, "$i-$text");
       $i++;
    }
+   $self->enable (key_press => \&matchlist_key_press);
 }
 sub most_recent {
    my ($self) = shift;
-   my $row = $self->nrow;
+   my $row = $self->nrow - 1;
    my @exec;
-   while($row-- > $self->top_row) {
+   while ($row >= $self->top_row) {
+      my $line = $self->line ($row);
       @exec = $self->command_for($row);
       last if(@exec);
+      $row = $line->beg - 1;
    }
    if(@exec) {
       return $self->exec_async (@exec);
    }
    ()
 sub on_start {
    my ($self) = @_;
    $self->{launcher} = $self->my_resource ("launcher") || $self->x_resource("url-launcher") || "sensible-browser";
-   $self->{matches} = [];
    $self->{button}  = 2;
    $self->{state}   = 0;
    if($self->{argv}[0] || $self->my_resource ("button")) {
       my @mods = split '', $self->{argv}[0] || $self->my_resource ("button");
       for my $mod (@mods) {
    my ($self, $row) = @_;
    # fetch the line that has changed
    my $line = $self->line ($row);
    my $text = $line->t;
-   my $i = 0;
    # find all urls (if any)
    for my $matcher (@{$self->{matchers}}) {
       while ($text =~ /$matcher->[0]/g) {
          #print "$&\n";
          my $rend = $line->r;
          # mark all characters as underlined. we _must_ not toggle underline,
          # as we might get called on an already-marked url.
          &{$matcher->[2]}
-         for @{$rend}[ $-[0] .. $+[0] - 1];
+            for @{$rend}[$-[0] .. $+[0] - 1];
          $line->r ($rend);
       }
    }
    | urxvt::ShiftMask | urxvt::ControlMask;
    return ($event->{button} == $self->{button} &&
       ($event->{state} & $mask) == $self->{state});
 }
-sub command_for {
+sub find_matches {
    my ($self, $row, $col) = @_;
    my $line = $self->line ($row);
    my $text = $line->t;
+   my $off = $line->offset_of ($row, $col) if defined $col;
+   my @matches;
    for my $matcher (@{$self->{matchers}}) {
       my $launcher = $matcher->[1] || $self->{launcher};
-      while (($text =~ /$matcher->[0]/g)) {
+      while ($text =~ /$matcher->[0]/g) {
-         my $match = $&;
+         my $match = substr $text, $-[0], $+[0] - $-[0];
          my @begin = @-;
          my @end = @+;
+         my @exec;
-         if (!defined($col) || ($-[0] <= $col && $+[0] >= $col)) {
+         if (!defined($off) || ($-[0] <= $off && $+[0] >= $off)) {
             if ($launcher !~ /\$/) {
-               return ($launcher,$match);
+               @exec = ($launcher, $match);
             } else {
                # It'd be nice to just access a list like ($&,$1,$2...),
                # but alas, m//g behaves differently in list context.
-               my @exec = map { s/\$(\d+)|\$\{(\d+)\}/
+               @exec = map { s/\$(\d+)|\$\{(\d+)\}/
-                  substr($text,$begin[$1||$2],$end[$1||$2]-$begin[$1||$2])
+                  substr $text, $begin[$1 || $2], $end[$1 || $2] - $begin[$1 || $2]
-                  /egx; $_ } split(/\s+/, $launcher);
+                  /egx; $_ } split /\s+/, $launcher;
-               return @exec;
             }
+            push @matches, [ $line->coord_of ($begin[0]), $line->coord_of ($end[0]), $match, @exec ];
          }
       }
+   }
+   @matches;
+}
+sub command_for {
+   my ($self, $row, $col) = @_;
+   my @matches = $self->find_matches ($row, $col);
+   if (@matches) {
+      my @match = @{ $matches[0] };
+      return @match[5 .. $#match];
    }
    ()
 }
    }
    1;
 }
+sub select_enter {
+   my ($self) = @_;
+   $self->{view_start} = $self->view_start;
+   $self->{pty_ev_events} = $self->pty_ev_events (urxvt::EV_NONE);
+   $self->{cur_row} = $self->nrow - 1;
+   $self->enable (
+      key_press     => \&select_key_press,
+      refresh_begin => \&select_refresh,
+      refresh_end   => \&select_refresh,
+   );
+   $self->{overlay} = $self->overlay (0, -1, $self->ncol, 1, urxvt::OVERLAY_RSTYLE, 0);
+   $self->{overlay}->set (0, 0, "match-select");
+}
+sub select_leave {
+   my ($self) = @_;
+   $self->disable ("key_press", "refresh_begin", "refresh_end");
+   $self->pty_ev_events ($self->{pty_ev_events});
+   delete $self->{overlay};
+   delete $self->{matches};
+   delete $self->{id};
+}
+sub select_search {
+   my ($self, $dir, $row) = @_;
+   while ($self->nrow > $row && $row >= $self->top_row) {
+      my $line = $self->line ($row)
+          or last;
+      my @matches = $self->find_matches ($row);
+      if (@matches) {
+         @matches = sort { $a->[0] <=> $b->[0] or $a->[1] <=> $b->[1] } @matches;
+         $self->{matches} = \@matches;
+         $self->{cur_row} = $row;
+         $self->{id} = $dir < 0 ? @{ $self->{matches} } - 1 : 0;
+         $self->view_start (List::Util::min 0, $row - ($self->nrow >> 1));
+         $self->want_refresh;
+         return;
+      }
+      $row = $dir < 0 ? $line->beg - 1 : $line->end + 1;
+   }
+   $self->scr_bell;
+}
+sub select_refresh {
+   my ($self) = @_;
+   return unless $self->{matches};
+   my $cur = $self->{matches}[$self->{id}];
+   $self->scr_xor_span (@$cur[0 .. 3], urxvt::RS_RVid);
+   ()
+}
+sub select_key_press {
+   my ($self, $event, $keysym, $string) =  @_;
+   if ($keysym == 0xff0d || $keysym == 0xff8d) { # enter
+      if ($self->{matches}) {
+         my @match = @{ $self->{matches}[$self->{id}] };
+         $self->exec_async (@match[5 .. $#match]);
+      }
+      $self->select_leave;
+   } elsif ($keysym == 0x79) { # y
+      if ($self->{matches}) {
+         $self->selection ($self->{matches}[$self->{id}][4], 1);
+         $self->selection_grab (urxvt::CurrentTime, 1);
+      }
+      $self->select_leave;
+   } elsif ($keysym == 0xff1b) { # escape
+      $self->view_start ($self->{view_start});
+      $self->select_leave;
+   } elsif ($keysym == 0xff50) { # home
+      $self->select_search (+1, $self->top_row)
+   } elsif ($keysym == 0xff57) { # end
+      $self->select_search (-1, $self->nrow - 1)
+   } elsif ($keysym == 0xff52) { # up
+      if ($self->{id} > 0) {
+         $self->{id}--;
+         $self->want_refresh;
+      } else {
+         my $line = $self->line ($self->{cur_row});
+         $self->select_search (-1, $line->beg - 1)
+            if $line->beg > $self->top_row;
+      }
+   } elsif ($keysym == 0xff54) { # down
+      if ($self->{id} < @{ $self->{matches} } - 1) {
+         $self->{id}++;
+         $self->want_refresh;
+      } else {
+         my $line = $self->line ($self->{cur_row});
+         $self->select_search (+1, $line->end + 1)
+            if $line->end < $self->nrow;
+      }
+   }
+   1
+}
 # vim:set sw=3 sts=3 et:

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/src/perl/matcher (file contents): Revision 1.20 by sf-exg, Thu Jun 12 06:03:49 2014 UTC vs. Revision 1.32 by sf-exg, Wed Jul 30 15:22:51 2014 UTC

Diff Legend

Comparing rxvt-unicode/src/perl/matcher (file contents):
Revision 1.20 by sf-exg, Thu Jun 12 06:03:49 2014 UTC vs.
Revision 1.32 by sf-exg, Wed Jul 30 15:22:51 2014 UTC