[ViewVC] Diff of: cvs/rxvt-unicode/src/urxvt.pm

Comparing rxvt-unicode/src/urxvt.pm (file contents):
Revision 1.196 by sf-exg, Wed Jun 29 22:46:48 2011 UTC vs.
Revision 1.213 by root, Wed Jun 6 15:09:49 2012 UTC

…		…
259	The default pattern to match URLs can be overridden with the	259	The default pattern to match URLs can be overridden with the
260	C<matcher.pattern.0> resource, and additional patterns can be specified	260	C<matcher.pattern.0> resource, and additional patterns can be specified
261	with numbered patterns, in a manner similar to the "selection" extension.	261	with numbered patterns, in a manner similar to the "selection" extension.
262	The launcher can also be overridden on a per-pattern basis.	262	The launcher can also be overridden on a per-pattern basis.
263		263
264	It is possible to activate the most recently seen match from the keyboard.	264	It is possible to activate the most recently seen match or a list of matches
		265	from the keyboard. Simply bind a keysym to "perl:matcher:last" or
265	Simply bind a keysym to "perl:matcher" as seen in the example below.	266	"perl:matcher:list" as seen in the example below.
266		267
267	Example configuration:	268	Example configuration:
268		269
269	URxvt.perl-ext: default,matcher	270	URxvt.perl-ext: default,matcher
270	URxvt.urlLauncher: sensible-browser	271	URxvt.urlLauncher: sensible-browser
271	URxvt.keysym.C-Delete: perl:matcher	272	URxvt.keysym.C-Delete: perl:matcher:last
		273	URxvt.keysym.M-Delete: perl:matcher:list
272	URxvt.matcher.button: 1	274	URxvt.matcher.button: 1
273	URxvt.matcher.pattern.1: \\bwww\\.[\\w-]+\\.[\\w./?&@#-]*[\\w/-]	275	URxvt.matcher.pattern.1: \\bwww\\.[\\w-]+\\.[\\w./?&@#-]*[\\w/-]
274	URxvt.matcher.pattern.2: \\B(/\\S+?):(\\d+)(?=:\|$)	276	URxvt.matcher.pattern.2: \\B(/\\S+?):(\\d+)(?=:\|$)
275	URxvt.matcher.launcher.2: gvim +$2 $1	277	URxvt.matcher.launcher.2: gvim +$2 $1
276		278
…		…
398	=item confirm-paste	400	=item confirm-paste
399		401
400	Displays a confirmation dialog when a paste containing at least a full	402	Displays a confirmation dialog when a paste containing at least a full
401	line is detected.	403	line is detected.
402		404
		405	=item bell-command
		406
		407	Runs the command specified by the C<URxvt.bell-command> resource when
		408	a bell event occurs. For example, the following pops up a notification
		409	bubble with the text "Beep, Beep" using notify-send:
		410
		411	URxvt.bell-command: notify-send "Beep, Beep"
		412
403	=back	413	=back
404		414
405	=head1 API DOCUMENTATION	415	=head1 API DOCUMENTATION
406		416
407	=head2 General API Considerations	417	=head2 General API Considerations
…		…
435		445
436	=item $octets	446	=item $octets
437		447
438	Either binary data or - more common - a text string encoded in a	448	Either binary data or - more common - a text string encoded in a
439	locale-specific way.	449	locale-specific way.
		450
		451	=item $keysym
		452
		453	an integer that is a valid X11 keysym code. You can convert a string
		454	into a keysym and viceversa by using C<XStringToKeysym> and
		455	C<XKeysymToString>.
440		456
441	=back	457	=back
442		458
443	=head2 Extension Objects	459	=head2 Extension Objects
444		460
…		…
656	resource in the @@RXVT_NAME@@(1) manpage).	672	resource in the @@RXVT_NAME@@(1) manpage).
657		673
658	The event is simply the action string. This interface is assumed to change	674	The event is simply the action string. This interface is assumed to change
659	slightly in the future.	675	slightly in the future.
660		676
		677	=item on_register_command $term, $keysym, $modifiermask, $string
		678
		679	Called after parsing a keysym resource but before registering the
		680	associated binding. If this hook returns TRUE the binding is not
		681	registered. It can be used to modify a binding by calling
		682	C<register_command>.
		683
661	=item on_resize_all_windows $term, $new_width, $new_height	684	=item on_resize_all_windows $term, $new_width, $new_height
662		685
663	Called just after the new window size has been calculated, but before	686	Called just after the new window size has been calculated, but before
664	windows are actually being resized or hints are being set. If this hook	687	windows are actually being resized or hints are being set. If this hook
665	returns TRUE, setting of the window hints is being skipped.	688	returns TRUE, setting of the window hints is being skipped.
…		…
739	use Scalar::Util ();	762	use Scalar::Util ();
740	use List::Util ();	763	use List::Util ();
741		764
742	our $VERSION = 1;	765	our $VERSION = 1;
743	our $TERM;	766	our $TERM;
744	our @TERM_INIT;	767	our @TERM_INIT; # should go, prevents async I/O etc.
745	our @TERM_EXT;	768	our @TERM_EXT; # should go, prevents async I/O etc.
746	our @HOOKNAME;	769	our @HOOKNAME;
747	our %HOOKTYPE = map +($HOOKNAME[$_] => $_), 0..$#HOOKNAME;	770	our %HOOKTYPE = map +($HOOKNAME[$_] => $_), 0..$#HOOKNAME;
748	our %OPTION;	771	our %OPTION;
749		772
750	our $LIBDIR;	773	our $LIBDIR;
…		…
920	};	943	};
921	}	944	}
922		945
923	no warnings 'utf8';	946	no warnings 'utf8';
924		947
		948	sub parse_resource {
		949	my ($term, $name, $isarg, $longopt, $flag, $value) = @_;
		950
		951	$term->scan_meta;
		952
		953	my $r = $term->{meta}{resource};
		954	while (my ($pattern, $v) = each %$r) {
		955	$name =~ y/-/./ if $isarg;
		956
		957	if (
		958	$pattern =~ /\.$/
		959	? $pattern eq substr $name, 0, length $pattern
		960	: $pattern eq $name
		961	) {
		962	$name = "$urxvt::RESCLASS.$name";
		963
		964	push @TERM_EXT, $v->[0];
		965
		966	if ($v->[1] eq "boolean") {
		967	$term->put_option_db ($name, $flag ? "true" : "false");
		968	return 1;
		969	} else {
		970	$term->put_option_db ($name, $value);
		971	return 1 + 2;
		972	}
		973	}
		974	}
		975
		976	0
		977	}
		978
		979	sub usage {
		980	my ($term, $usage_type) = @_;
		981
		982	$term->scan_meta;
		983
		984	my $r = $term->{meta}{resource};
		985
		986	for my $pattern (sort keys %$r) {
		987	my ($ext, $type, $desc) = @{ $r->{$pattern} };
		988
		989	$desc .= " (-pe $ext)";
		990
		991	if ($usage_type == 1) {
		992	$pattern =~ y/./-/;
		993	$pattern =~ s/-$/-.../g;
		994
		995	if ($type eq "boolean") {
		996	urxvt::log sprintf " -%-30s %s\n", "/+$pattern", $desc;
		997	} else {
		998	urxvt::log sprintf " -%-30s %s\n", "$pattern $type", $desc;
		999	}
		1000	} else {
		1001	$pattern =~ s/\.$/.*/g;
		1002	urxvt::log sprintf " %-31s %s\n", "$pattern:", $type;
		1003	}
		1004	}
		1005	}
		1006
925	my $verbosity = $ENV{URXVT_PERL_VERBOSITY};	1007	my $verbosity = $ENV{URXVT_PERL_VERBOSITY};
926		1008
927	sub verbose {	1009	sub verbose {
928	my ($level, $msg) = @_;	1010	my ($level, $msg) = @_;
929	warn "$msg\n" if $level <= $verbosity;	1011	warn "$msg\n" if $level <= $verbosity;
…		…
965	sub invoke {	1047	sub invoke {
966	local $TERM = shift;	1048	local $TERM = shift;
967	my $htype = shift;	1049	my $htype = shift;
968		1050
969	if ($htype == 0) { # INIT	1051	if ($htype == 0) { # INIT
970	my @dirs = ((split /:/, $TERM->resource ("perl_lib")), "$LIBDIR/perl");	1052	my @dirs = $TERM->perl_libdirs;
971		1053
972	my %ext_arg;	1054	my %ext_arg;
973		1055
974	{	1056	{
975	my @init = @TERM_INIT;	1057	my @init = @TERM_INIT;
…		…
1136	=head2 The C<urxvt::anyevent> Class	1218	=head2 The C<urxvt::anyevent> Class
1137		1219
1138	The sole purpose of this class is to deliver an interface to the	1220	The sole purpose of this class is to deliver an interface to the
1139	C<AnyEvent> module - any module using it will work inside urxvt without	1221	C<AnyEvent> module - any module using it will work inside urxvt without
1140	further programming. The only exception is that you cannot wait on	1222	further programming. The only exception is that you cannot wait on
1141	condition variables, but non-blocking condvar use is ok. What this means	1223	condition variables, but non-blocking condvar use is ok.
1142	is that you cannot use blocking APIs, but the non-blocking variant should	1224
1143	work.	1225	In practical terms this means is that you cannot use blocking APIs, but
		1226	the non-blocking variant should work.
1144		1227
1145	=cut	1228	=cut
1146		1229
1147	our $VERSION = '5.23';	1230	our $VERSION = '5.23';
1148		1231
…		…
1207		1290
1208	sub DESTROY {	1291	sub DESTROY {
1209	$_[0][1]->stop;	1292	$_[0][1]->stop;
1210	}	1293	}
1211		1294
		1295	# only needed for AnyEvent < 6 compatibility
1212	sub one_event {	1296	sub one_event {
1213	Carp::croak "AnyEvent->one_event blocking wait unsupported in urxvt, use a non-blocking API";	1297	Carp::croak "AnyEvent->one_event blocking wait unsupported in urxvt, use a non-blocking API";
1214	}	1298	}
1215		1299
1216	package urxvt::term;	1300	package urxvt::term;
…		…
1241	$self->{_pkg}{$pkg} = $proxy;	1325	$self->{_pkg}{$pkg} = $proxy;
1242		1326
1243	for my $name (@HOOKNAME) {	1327	for my $name (@HOOKNAME) {
1244	if (my $ref = $pkg->can ("on_" . lc $name)) {	1328	if (my $ref = $pkg->can ("on_" . lc $name)) {
1245	$proxy->enable ($name => $ref);	1329	$proxy->enable ($name => $ref);
		1330	}
		1331	}
		1332	}
		1333
		1334	sub perl_libdirs {
		1335	map { split /:/ }
		1336	$_[0]->resource ("perl_lib"),
		1337	$ENV{URXVT_PERL_LIB},
		1338	"$ENV{HOME}/.urxvt/ext",
		1339	"$LIBDIR/perl"
		1340	}
		1341
		1342	sub scan_meta {
		1343	my ($self) = @_;
		1344	my @libdirs = perl_libdirs $self;
		1345
		1346	return if $self->{meta_libdirs} eq join "\x00", @libdirs;
		1347
		1348	my %meta;
		1349
		1350	$self->{meta_libdirs} = join "\x00", @libdirs;
		1351	$self->{meta} = \%meta;
		1352
		1353	for my $dir (reverse @libdirs) {
		1354	opendir my $fh, $dir
		1355	or next;
		1356	for my $ext (readdir $fh) {
		1357	$ext ne "."
		1358	and $ext ne ".."
		1359	and open my $fh, "<", "$dir/$ext"
		1360	or next;
		1361
		1362	while (<$fh>) {
		1363	if (/^#:META:X_RESOURCE:(.*)/) {
		1364	my ($pattern, $type, $desc) = split /:/, $1;
		1365	$pattern =~ s/^%(?:\.\|$)/$ext./g; # % in pattern == extension name
		1366	if ($pattern =~ /[^a-zA-Z0-9\-\.]/) {
		1367	warn "$dir/$ext: meta resource '$pattern' contains illegal characters (not alphanumeric nor . nor *)\n";
		1368	} else {
		1369	$meta{resource}{$pattern} = [$ext, $type, $desc];
		1370	}
		1371	} elsif (/^\s*(?:#\|$)/) {
		1372	# skip other comments and empty lines
		1373	} else {
		1374	last; # stop parsing on first non-empty non-comment line
		1375	}
		1376	}
1246	}	1377	}
1247	}	1378	}
1248	}	1379	}
1249		1380
1250	=item $term = new urxvt::term $envhashref, $rxvtname, [arg...]	1381	=item $term = new urxvt::term $envhashref, $rxvtname, [arg...]
…		…
1371		1502
1372	This method should only be called during the C<on_start> hook, as there is	1503	This method should only be called during the C<on_start> hook, as there is
1373	only one resource database per display, and later invocations might return	1504	only one resource database per display, and later invocations might return
1374	the wrong resources.	1505	the wrong resources.
1375		1506
1376	=item $success = $term->parse_keysym ($keysym_spec, $command_string)	1507	=item $value = $term->x_resource_boolean ($pattern)
1377		1508
		1509	Like C<x_resource>, above, but interprets the string value as a boolean
		1510	and returns C<1> for true values, C<0> for false values and C<undef> if
		1511	the resource or option isn't specified.
		1512
		1513	You should always use this method to parse boolean resources.
		1514
		1515	=cut
		1516
		1517	sub x_resource_boolean {
		1518	my $res = &x_resource;
		1519
		1520	$res =~ /^\s(?:true\|yes\|on\|1)\s$/i ? 1 : defined $res && 0
		1521	}
		1522
		1523	=item $success = $term->parse_keysym ($key, $octets)
		1524
1378	Adds a keymap translation exactly as specified via a resource. See the	1525	Adds a key binding exactly as specified via a resource. See the
1379	C<keysym> resource in the @@RXVT_NAME@@(1) manpage.	1526	C<keysym> resource in the @@RXVT_NAME@@(1) manpage.
		1527
		1528	=item $term->register_command ($keysym, $modifiermask, $string)
		1529
		1530	Adds a key binding. This is a lower level api compared to
		1531	C<parse_keysym>, as it expects a parsed key description, and can be
		1532	used only inside either the C<on_init> hook, to add a binding, or the
		1533	C<on_register_command> hook, to modify a parsed binding.
1380		1534
1381	=item $rend = $term->rstyle ([$new_rstyle])	1535	=item $rend = $term->rstyle ([$new_rstyle])
1382		1536
1383	Return and optionally change the current rendition. Text that is output by	1537	Return and optionally change the current rendition. Text that is output by
1384	the terminal application will use this style.	1538	the terminal application will use this style.
…		…
1597		1751
1598	Adds the specified events to the vt event mask. Useful e.g. when you want	1752	Adds the specified events to the vt event mask. Useful e.g. when you want
1599	to receive pointer events all the times:	1753	to receive pointer events all the times:
1600		1754
1601	$term->vt_emask_add (urxvt::PointerMotionMask);	1755	$term->vt_emask_add (urxvt::PointerMotionMask);
		1756
		1757	=item $term->set_urgency ($set)
		1758
		1759	Enable/disable the urgency hint on the toplevel window.
1602		1760
1603	=item $term->focus_in	1761	=item $term->focus_in
1604		1762
1605	=item $term->focus_out	1763	=item $term->focus_out
1606		1764
…		…
1922	=item $term->XMoveResizeWindow ($window, $x, $y, $width, $height)	2080	=item $term->XMoveResizeWindow ($window, $x, $y, $width, $height)
1923		2081
1924	=item ($x, $y, $child_window) = $term->XTranslateCoordinates ($src, $dst, $x, $y)	2082	=item ($x, $y, $child_window) = $term->XTranslateCoordinates ($src, $dst, $x, $y)
1925		2083
1926	=item $term->XChangeInput ($window, $add_events[, $del_events])	2084	=item $term->XChangeInput ($window, $add_events[, $del_events])
		2085
		2086	=item $keysym = $term->XStringToKeysym ($string)
		2087
		2088	=item $string = $term->XKeysymToString ($keysym)
1927		2089
1928	Various X or X-related functions. The C<$term> object only serves as	2090	Various X or X-related functions. The C<$term> object only serves as
1929	the source of the display, otherwise those functions map more-or-less	2091	the source of the display, otherwise those functions map more-or-less
1930	directly onto the X functions of the same name.	2092	directly onto the X functions of the same name.
1931		2093

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing rxvt-unicode/src/urxvt.pm (file contents): Revision 1.196 by sf-exg, Wed Jun 29 22:46:48 2011 UTC vs. Revision 1.213 by root, Wed Jun 6 15:09:49 2012 UTC

Diff Legend

Comparing rxvt-unicode/src/urxvt.pm (file contents):
Revision 1.196 by sf-exg, Wed Jun 29 22:46:48 2011 UTC vs.
Revision 1.213 by root, Wed Jun 6 15:09:49 2012 UTC