Canary-Stability/Stability.pm

=head1 NAME

Canary::Stability - to be done

=head1 SYNOPSIS

 use Canary::Stability;

=head1 DESCRIPTION

This is just a placeholder module, to be filled in later.

=over 4

=cut

package Canary::Stability;

BEGIN {
   $VERSION = 2001;
}

sub sgr {
   # we just assume ANSI almost everywhere
   # red 31, yellow 33, green 32

   $ENV{PERL_CANARY_STABILITY_COLOUR} ne 0
   and ((-t STDOUT and length $ENV{TERM}) or $ENV{PERL_CANARY_STABILITY_COLOUR})
   and print "\e[$_[0]m";
}

sub import {
   my (undef, $distname, $minvers, $minperl) = @_;

   $ENV{PERL_CANARY_STABILITY_DISABLE}
      and return;

   $minperl ||= 5.008002;

   if ($minvers > $VERSION) {
      sgr 33;
      print <<EOF;

***
*** The stability canary says: (nothing, it died of old age).
***
*** Your Canary::Stability module (used by $distname) is too old.
*** This is not a fatal problem - while you might want to upgrade to version
*** $minvers (currently installed version: $VERSION) to get better support
*** status testing, you might also not want to care at all, and all will
*** be well as long $distname works well enough for you, as the stability
*** canary is only used when installing the distribution.
***

EOF
   } elsif ($] < $minperl) {

      sgr 33;
      print <<EOF;

***
*** The stability canary says: chirp (it seems concerned about something).
***
*** Your perl version ($]) is older than the $distname distribution
*** likes ($minperl). This is not a fatal problem - the module might work
*** well with your version of perl, but it does mean the author likely
*** won't do anything to make it work if it breaks.
***

EOF
   } elsif (defined $Internals::StabilityBranchVersion) {
      # note to people studying this modules sources:
      # the above test is not considered a clean or stable way to
      # test for the stability branch.

      sgr 32;
      print <<EOF;

***
*** The stability canary says: chirp! chirp! (it seems to be quite excited)
***
*** It seems you are running schmorp's stability branch of perl.
*** All should be well, and if it isn't, you should report this as a bug
*** to the $distname author.
***

EOF
   } elsif ($] <= 5.020) {
      #sgr 32;
      print <<EOF;

***
*** The stability canary says: chirp! chirp! (it seems to be quite happy)
***
*** Your version of perl ($]) is quite supported by $distname, nothing
*** else to be said, hope it comes in handy.
***

EOF
   } else {
      sgr 31;
      print <<EOF;

***
*** The stability canary says: (nothing, it was driven away by harsh weather)
***
*** It seems you are running perl version $], likely the "official" or
*** "standard" version. While there is nothing wrong with doing that,
*** standard perl versions 5.022 and up are not supported by $distname.
*** While this might be fatal, it might also be all right - if you run into
*** problems, you might want to downgrade your perl or switch to the
*** stability branch.
***
*** If everything works fine, you can ignore this message.
***
EOF
      sgr 0;
      print <<EOF;
*** Stability canary mini-FAQ:
***
*** Do I need to do anything?
***    With luck, no. While some distributions are known to fail
***    already, most should probably work. This message is here
***    to alert you that your perl is not supported by $distname,
***    and if things go wrong, you either need to downgrade, or
***    sidegrade to the stability variant of your perl version,
***    or simply live with the consequences.
***
*** What is this canary thing?
***    It's purpose is to check support status of $distname with
***    respect to your perl version.
***
*** What is this "stability branch"?
***    It's a branch or fork of the official perl, by schmorp, to
***    improve stability and compatibility with existing modules.
***
*** How can I skip this prompt on automated installs?
***    Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
***    More info is in the Canary::Stability manpage.
***
*** Long version of this FAQ: http://stabilityperl.schmorp.de/faq.html
*** Stability Branch homepage: http://stabilityperl.schmorp.de/
***

EOF

      unless ($ENV{PERL_CANARY_STABILITY_NOPROMPT}) {
         require ExtUtils::MakeMaker;

         ExtUtils::MakeMaker::prompt ("Continue anyways? ", "y") =~ /^y/i
            or die "FATAL: User aborted configuration of $distname.\n";
      }
   }

   sgr 0;
}

=head1 ENVIRONMENT VARIABLES

=over 4

=item C<PERL_CANARY_STABILITY_NOPROMPT=1>

Do not prompt the user on alert messages.

=item C<PERL_CANARY_STABILITY_COLOUR=0>

Disable use of colour.

=item C<PERL_CANARY_STABILITY_COLOUR=1>

Force use of colour.

=item C<PERL_CANARY_STABILITY_DISABLE=1>

Disable this modules functionality completely.

=back

=head1 AUTHOR

 Marc Lehmann <schmorp@schmorp.de>
 http://home.schmorp.de/

=cut

1

Revision:	1.3
Committed:	Thu Jun 4 23:49:11 2015 UTC (11 years, 3 months ago) by root
Branch:	MAIN
Changes since 1.2:	+6 -7 lines
Log Message:	* empty log message *
#	User	Rev	Content
1	root	1.1	=head1 NAME
2
3			Canary::Stability - to be done
4
5			=head1 SYNOPSIS
6
7			use Canary::Stability;
8
9			=head1 DESCRIPTION
10
11	root	1.2	This is just a placeholder module, to be filled in later.
12	root	1.1
13			=over 4
14
15			=cut
16
17			package Canary::Stability;
18
19			BEGIN {
20	root	1.3	$VERSION = 2001;
21	root	1.2	}
22
23			sub sgr {
24			# we just assume ANSI almost everywhere
25			# red 31, yellow 33, green 32
26
27			$ENV{PERL_CANARY_STABILITY_COLOUR} ne 0
28			and ((-t STDOUT and length $ENV{TERM}) or $ENV{PERL_CANARY_STABILITY_COLOUR})
29			and print "\e[$_[0]m";
30	root	1.1	}
31
32			sub import {
33	root	1.2	my (undef, $distname, $minvers, $minperl) = @_;
34
35			$ENV{PERL_CANARY_STABILITY_DISABLE}
36			and return;
37
38			$minperl \|\|= 5.008002;
39
40			if ($minvers > $VERSION) {
41			sgr 33;
42			print <<EOF;
43
44			***
45	root	1.3	*** The stability canary says: (nothing, it died of old age).
46	root	1.2	***
47			*** Your Canary::Stability module (used by $distname) is too old.
48			*** This is not a fatal problem - while you might want to upgrade to version
49			*** $minvers (currently installed version: $VERSION) to get better support
50			*** status testing, you might also not want to care at all, and all will
51			*** be well as long $distname works well enough for you, as the stability
52			*** canary is only used when installing the distribution.
53			***
54
55			EOF
56			} elsif ($] < $minperl) {
57
58			sgr 33;
59			print <<EOF;
60
61			***
62	root	1.3	*** The stability canary says: chirp (it seems concerned about something).
63	root	1.2	***
64			*** Your perl version ($]) is older than the $distname distribution
65			*** likes ($minperl). This is not a fatal problem - the module might work
66			*** well with your version of perl, but it does mean the author likely
67	root	1.3	*** won't do anything to make it work if it breaks.
68	root	1.2	***
69
70			EOF
71			} elsif (defined $Internals::StabilityBranchVersion) {
72			# note to people studying this modules sources:
73			# the above test is not considered a clean or stable way to
74			# test for the stability branch.
75
76			sgr 32;
77			print <<EOF;
78
79			***
80			*** The stability canary says: chirp! chirp! (it seems to be quite excited)
81			***
82			*** It seems you are running schmorp's stability branch of perl.
83			*** All should be well, and if it isn't, you should report this as a bug
84			*** to the $distname author.
85			***
86
87			EOF
88	root	1.3	} elsif ($] <= 5.020) {
89			#sgr 32;
90	root	1.2	print <<EOF;
91
92			***
93			*** The stability canary says: chirp! chirp! (it seems to be quite happy)
94			***
95			*** Your version of perl ($]) is quite supported by $distname, nothing
96			*** else to be said, hope it comes in handy.
97			***
98
99			EOF
100			} else {
101			sgr 31;
102			print <<EOF;
103
104			***
105			*** The stability canary says: (nothing, it was driven away by harsh weather)
106			***
107			*** It seems you are running perl version $], likely the "official" or
108			*** "standard" version. While there is nothing wrong with doing that,
109			*** standard perl versions 5.022 and up are not supported by $distname.
110			*** While this might be fatal, it might also be all right - if you run into
111			*** problems, you might want to downgrade your perl or switch to the
112			*** stability branch.
113			***
114			*** If everything works fine, you can ignore this message.
115			***
116			EOF
117			sgr 0;
118			print <<EOF;
119			*** Stability canary mini-FAQ:
120			***
121			*** Do I need to do anything?
122			*** With luck, no. While some distributions are known to fail
123			*** already, most should probably work. This message is here
124			*** to alert you that your perl is not supported by $distname,
125			*** and if things go wrong, you either need to downgrade, or
126			*** sidegrade to the stability variant of your perl version,
127			*** or simply live with the consequences.
128			***
129			*** What is this canary thing?
130			*** It's purpose is to check support status of $distname with
131			*** respect to your perl version.
132			***
133			*** What is this "stability branch"?
134			*** It's a branch or fork of the official perl, by schmorp, to
135			*** improve stability and compatibility with existing modules.
136			***
137			*** How can I skip this prompt on automated installs?
138			*** Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
139			*** More info is in the Canary::Stability manpage.
140			***
141			*** Long version of this FAQ: http://stabilityperl.schmorp.de/faq.html
142			*** Stability Branch homepage: http://stabilityperl.schmorp.de/
143			***
144
145			EOF
146
147			unless ($ENV{PERL_CANARY_STABILITY_NOPROMPT}) {
148			require ExtUtils::MakeMaker;
149
150			ExtUtils::MakeMaker::prompt ("Continue anyways? ", "y") =~ /^y/i
151			or die "FATAL: User aborted configuration of $distname.\n";
152			}
153			}
154
155			sgr 0;
156	root	1.1	}
157
158	root	1.2	=head1 ENVIRONMENT VARIABLES
159
160			=over 4
161
162			=item C<PERL_CANARY_STABILITY_NOPROMPT=1>
163
164			Do not prompt the user on alert messages.
165
166			=item C<PERL_CANARY_STABILITY_COLOUR=0>
167
168			Disable use of colour.
169
170			=item C<PERL_CANARY_STABILITY_COLOUR=1>
171
172			Force use of colour.
173
174			=item C<PERL_CANARY_STABILITY_DISABLE=1>
175
176			Disable this modules functionality completely.
177
178			=back
179
180	root	1.1	=head1 AUTHOR
181
182			Marc Lehmann <schmorp@schmorp.de>
183			http://home.schmorp.de/
184
185			=cut
186
187			1
188