[ViewVC] Annotation of: cvs/AnyEvent-MP/bin/aemp

#!/opt/bin/perl

=head1 NAME

   aemp - AnyEvent:MP utility

=head1 SYNOPSIS

   aemp command args...

   # protocol commands
   aemp snd <port> <arg...>      # send a message
   aemp mon <port>               # wait till port is killed
   aemp cal <port> <arg...>      # send message, append reply
   aemp eval <node> <expr...>    # evaluate expression
   aemp shell [<node>]           # run an interactive shell
   aemp trace <node>             # trace the network topology

   # run a node
   aemp run configure_args...    # run a node
   aemp restart <node>           # restart a node if running under watchdog

   # node configuration: node ID
   aemp setnodeid <nodeid>       # configure the real node id
   aemp delnodeid                # reset node id to default (= inherit)

   # node configuration: authentication
   aemp gensecret                # generate a random shared secret
   aemp setsecret <secret>       # set the shared secret
   aemp delsecret                # remove the secret (= inherit)
   aemp gencert                  # generate a random certificate
   aemp setcert <file>           # set a certificate (key.pem + certificate.pem)
   aemp delcert                  # remove certificate (= inherit)

   # node configuration: seed addresses for bootstrapping
   aemp setseeds <host:port>,... # set seeds
   aemp delseeds                 # clear all seeds (= inherit)
   aemp addseed <host:port>      # add a seed
   aemp delseed <host:port>      # remove seed

   # node configuration: bind addresses
   aemp setbinds <host:port>,... # set binds
   aemp delbinds                 # clear all binds (= inherit)
   aemp addbind <host:port>      # add a bind address
   aemp delbind <host:port>      # remove a bind address

   # node configuration: services
   aemp setservices initfunc,... # set service functions
   aemp delservices              # clear all services (= inherit)
   aemp addservice <initfunc>    # add an instance of a service
   aemp delservice <initfunc>    # delete one instance of a service

   # profile management
   aemp profile <name> <command>... # apply command to profile only
   aemp setparent <name>         # specify a parent profile
   aemp delparent                # clear parent again
   aemp delprofile <name>        # eradicate the named profile
   aemp showprofile <name>       # display given profile
   aemp showconfig <name> ...    # display effective config

   # node configuration: low-level protocol
   aemp [set|del]secure <boolean>
   aemp [set|del]monitor_timeout <seconds>
   aemp [set|del]connect_interval <seconds>
   aemp [set|del]framing_format [array]
   aemp [set|del]auth_offer [array]
   aemp [set|del]auth_accept [array]
   aemp [set|del]autocork <boolean>
   aemp [set|del]nodelay <boolean>

=head1 DESCRIPTION

With aemp you can configure various aspects of AnyEvent::MP and its
protocol, send various messages and even run a node.

The F<aemp> utility works like F<cvs>, F<svn> or other commands: the first
argument defines which operation (subcommand) is requested, after which
arguments for this operation are expected. When a subcommand does not eat
all remaining arguments, the remaining arguments will again be interpreted
as subcommand and so on.

This means you can chain multiple commands, which is handy for profile
configuration, e.g.:

   aemp gensecret profile xyzzy binds 4040,4041 nodeid anon/

Please note that all C<setxxx> subcommands have an alias without the
C<set> prefix.

All configuration data is stored in a human-readable (JSON) config file
stored in F<~/.perl-anyevent-mp> (or F<%appdata%/perl-anyevent-mp> on
loser systems, or wherever C<$ENV{PERL_ANYEVENT_MP_RC}> points to). Feel
free to look at it or edit it, the format is relatively simple.

=head2 SPECIFYING ARGUMENTS

Arguments can be specified just as with any other shell command, with a
few special cases:

If the I<first> argument starts with a literal C<[>-character, then it is
interpreted as a UTF-8 encoded JSON text. The resulting array replaces all
arguments.

Otherwise, if I<any> argument starts with one of C<[>, C<{> or C<">, then
it is interpreted as UTF-8 encoded JSON text (or a single value in case of
C<">), and the resulting reference or scalar replaces the argument.

This allows you, for example, to specify binds in F<aemp run> (using POSIX
shell syntax):

   aemp run binds '["*:4040"]'

=head2 RUNNING A NODE

This can be used to run a node - together with some services, this makes
it unnecessary to write any wrapper programs.

=over 4

=item run <configure_args>...

Runs a node by calling C<AnyEvent::MP::Kernel::configure> with the given
arguments. The node runs under L<AnyEvent::Watchdog>, can be restarted
(and autorestarted, see the L<AnyEvent::Watchdog> manual). A very common
invocation is to just specify a profile using the profile name

   aemp run database-backend

... but you can use most arguments that C<configure> understands:

   aemp run nodeid mynode2 profile someprofile

Care has been taken to load (almost) no modules other than
L<AnyEvent::Watchdog> and the modules it loads, so everything (including
the L<AnyEvent::MP> modules themselves) will be freshly loaded on restart,
which makes upgrading everything except the perl binary easy.

=item restart <node>

Restarts the node using C<AnyEvent::Watchdog::Util::restart>. This works
for nodes started by C<aemp run>, but also for any other node that uses
L<AnyEvent::Watchdog>.

=back

=head2 PROTOCOL COMMANDS

These commands actually communicate with other nodes. They all use a node
profile name of C<aemp> (specifying a default node ID of C<anon/> and a
binds list containing C<*:*> only).

They all use a timeout of five seconds, after which they give up.

=over 4

=item snd <port> <arguments...>

Simply send a message to the given port - where you get the port ID from
is your problem.

Exits after ensuring that the message has been delivered to its node.

Most useful to take advantage of some undocumented functionality inside
nodes, such as node ports being able to call any method:

   aemp snd doomed AnyEvent::Watchdog::restart 1

=item cal <port> <arg...>

Like F<aemp cal>: appends a local reply port to the message and waits for
a message to it.

Any return values will be JSON-encoded and printed separated by commas
(kind of like a JSON array without []-brackets).

Example: ask the (undocumented) time service of a node for its current
time.

   aemp cal mynode time

=item mon <port>

Monitors the port and exits when it's monitorign callback is called. Most
useful to monitor node ports.

Example: monitor some node.

   aemp mon doomed

=item eval <node> <expr...>

Joins all remaining arguments into a string and evaluates it on the given
node. Return values are handled as with F<aemp cal>.

Example: find the unix process ID of the node called posicks.

   aemp eval posicks '$$'

=item trace <node>

Asks the given node for all currently connected nodes, then asks those
nodes for the same, thus tracing all node connections.

=back

=head2 CONFIGURATION/NODE ID/SECRET/CERTIFICATE

These commands deal with rather basic settings, the node ID, the shared
secret and the TLS certificate.

=over 4

=item setnodeid <nodeid>

Set the node ID to the given string. If it ends with a slash (C</>), then
a random string is appended to make it unique.

If no nodeid is specified in any profile, then the profile name, plus
appended slash, is used.

=item delnodeid

Removes the node ID again, which means it is inherited again from it's
parent profile, or stays unset.

=item gensecret

Generates a random shared secret (currently 1071 bits) and sets it. The
shared secret is used to authenticate nodes to each other when TLS is not
required.

=item setsecret <secret>

Sets the shared secret to the given string, which can be anything.

=item delsecret

Removes the shared secret again, which means it is inherited again from
it's parent profile, or stays unset.

=item gencert

Generates a self-signed certificate and key, and sets it. This works
similarly to a shared secret: when all nodes have it, TLS will be used to
authenticate and encrypt all traffic.

=item setcert <file>

Set a node certificate (and optionally any CA certificates) from the given
file. The file must contain the key, followed by the certificate, followed
by any CA certificates you want to trust, all in PEM format.

See L<AnyEvent::TLS> for some more details - this sets the C<cert> and
C<ca_cert> options.

=item delcert

Removes the certificate(s) again, which means it is inherited again from
it's parent profile, or stays unset.

=back

=head2 CONFIGURATION/SEEDS

To discover the network you have to specify some seed addresses, which are
basically C<host:port> pairs where you expect some long-running nodes. It
does no harm to have a node as its own seed (they will eventually be
ignored).

=over 4

=item setseeds <host:port>,...

Sets or replaces the list of seeds, which must be specified as a
comma-separated list of C<host:port> pairs. The C<host> can be a hostname,
an IP address, or C<*> to signify all local host addresses (which makes
little sense for seeds, outside some examples, but a lot of sense for
binds).

An empty list is allowed.

Example: use C<doomed> with default port as only seednode.

   aemp setseeds doomed

=item delseeds

Removes the seed list again, which means it is inherited again from it's
parent profile, or stays unset.

=item addseed <host:port>

Adds a single seed address.

=item delseed <host:port>

Deletes the given seed address, if it exists.

=back

=head2 CONFIGURATION/BINDS

To be able to be reached from other nodes, a node must I<bind> itself
to some listening socket(s). The list of these can either bs specified
manually, or AnyEvent::MP can guess them. Nodes without any binds are
possible to some extent.

=over 4

=item setbinds <host:port>,...

Sets the list of bind addresses explicitly - see the F<aemp setseeds>
command for the exact syntax. In addition, a value of C<*> for the port,
or not specifying a port, means to use a dynamically-assigned port.

Note that the C<*>, C<*:*> or C<*:port> patterns are very useful here.

Example: bind on a ephemeral port on all local interfaces.

   aemp setbinds "*"

Example: bind on a random port on all local interfaces.

   aemp setbinds "*:*"

Example: resolve "doomed.mydomain" and try to bind on port C<4040> of all
IP addressess returned.

   aep setbinds doomed.mydomain:4040

=item delbinds

Removes the bind list again, which means it is inherited again from it's
parent profile, or stays unset.

=item addbind <host:port>

Adds a single bind address.

=item delbind <host:port>

Deletes the given bind address, if it exists.

=back

=head2 CONFIGURATION/SERVICES

Services are modules (or functions) that are automatically loaded (or
executed) when a node starts. They are especially useful when used in
conjunction with F<aemp run>, to configure which services a node should
run.

Despite the daunting name, services really I<are> nothing more than a
module name or a function name with arguments. The "service" aspect comes
only from the behaviour of the module or function, which is supposed to
implement, well, some kind of service for the node, network etc.

Instead of writing a standalone program for each different node type in
your network, you can simply put your code into a module, and then let the
configuration decide which node runs which "services". This also makes it
easy to combine multiple different services within the same node.

=over 4

=item setservices <initfunc>...

Sets or replaces the list of services, which must be specified as a
comma-separated list or a JSON array.

Each string entry in the list is interpreted as either a module name to
load (when it ends with C<::>) or a function to call (all other cases).

Each entry which is an array itself (you need to use JSON format to
specify those) is interpreted as a function name and the arguments to
pass.

The algorithm to find the function is the same as used for C<<
L<AnyEvent::MP>::spawn >>.

Example: run the globa service (which runs anyway, but this doesn't hurt).

   aemp setservices AnyEvent::MP::Global::

Example: call the mymod::myfun function with arguments 1, 2 and 3.

   aemp setservices '[["mymod::myfun", 1,2,3]]'

=item delservices

Removes the service list again, which means it is inherited again from
it's parent profile, or stays unset.

=item addservice <initfunc>

Adds a single service.

=item delservice <initfunc>

Deletes the given service, if it exists.

=back

=head2 CONFIGURATION/PROFILE MANAGEMENT

All the above configuration functions by default affect the I<global
default configuration>, which is basically used to augment every profile
and node configuration.

=over 4

=item profile <name> ...

This subcommand makes the following subcommands act only on a specific
named profile, instead of on the global default. The profile is created if
necessary.

Example: create a C<server> profile, give it a random node name, some seed
nodes and bind it on an unspecified port on all local interfaces. You
should add some services then and run the node...

   aemp profile server nodeid anon/ seeds doomed,10.0.0.2:5000 binds "*:*"

=item delprofile <name>

Deletes the profile of the given name.

=item setparent <name>

Sets the parent profile to use - values not specified in a profile will be
taken from the parent profile (even recursively, with the global default
config being the default parent). This is useful to configure profile
I<classes> and then to inherit from them for individual nodes.

Note that you can specify circular parent chains and even a parent for the
global configuration. Neither will do you any good, however.

Example: inherit all values not specified in the C<doomed> profile from
the C<server> profile.

   aemp profile doomed setparent server

=item delparent

Removes the parent again from the profile, if any was set, so the profile
inherits directly from the global default config again.

=item showprofile <name>

Shows the values of the given profile, and only those, no inherited
values.

=item showconfig <name> <key value...>

Shows the I<effective> config, i.e. the values as used by a node started
with the given profile name. Any additional key-value pairs specified
augment the configuration, just as with C<configure>.

If all arguments are omitted, show the global default config.

=back

=head2 LOW-LEVEL TRANSPORT PROTOCOL

The low-level transport protocol betwene two nodes also has a number of
configurable options, most of which should not be touched unless you know
what you are doing.

=over 4

=item [set|del]secure <boolean>

Normally, nodes allow anything to be done to them by remote nodes,
including remotely-triggered execution of code.

Sometimes a more secure mode is desired - this can be achieved by setting
the secure option to a true value.

When secure mode is enabled, then remote nodes cannot execute code
locally, at least not via the normal node protocol. All other messages are
still allowed. This means remote nodes can monitor, kill or local ports
(port names can be easily guessed).

At the moment, this affects C<snd_on>, C<eval_on> and C<spawn>
functionality.

The C<configure> function additionally allows you to specify a callback
that can grant or suppress such requests on a per-node basis.

=item [set|del]monitor_timeout <seconds>

Sets the default monitor timeout, that is, when a connection to a node
cannot be established within this many seconds, the node is declared
unreachable and all monitors will fire.

C<30> seconds are usually a good time span for this.

=item [set|del]connect_interval <seconds>

When a connection cannot be established successfully within this many
seconds, try the next transport address (e.g. the next IP address). If
your nodes have a lot of transports, you might have to set this to a low
value so that they will actually all be tried within the monitor timeout
interval.

C<2> is usually a good value, unless you live in new zealand.

=item [set|del]framing_format [array]

Configures the list of framing formats offered to the other side. This is
simply a list of formatted read/write types used with L<AnyEvent::Handle>,
in order of decreasing preference.

Nodes support both C<json> and C<storable> framing formats for data
packets out of the box, and usually choose C<json> because it is first in
the list.

Example: prefer the C<My::Personal::Format> framing format over JSON over
Storable.

   aemp setframing_format '["My::Personal::Format", "json", "storable"]'

=item [set|del]auth_offer [array]

Configures the list of authentication types that the node offers to the
other side as acceptable, in order of decreasing preference. Only auth
methods that the node can actually support will be offered.

The default is '["tls_md6_64_256", "hmac_md6_64_256"]' and is usually good
enough.

=item [set|del]auth_accept [array]

Configures the list of authentication types that remote nodes can use to
authenticate, in order of decreasing preference.

The default is '["tls_md6_64_256", "hmac_md6_64_256", "tls_anon",
"cleartext"]' and is usually good enough.

=item [set|del]autocork <boolean>

Sets the default C<autocork> option value for the L<AnyEvent::Handle>
object used by transports. By default, autocorking is off.

=item [set|del]nodelay <boolean>

Sets the default C<nodelay> option value for the L<AnyEvent::Handle>
object used by transports. By default, nodelay is on.

=back

=cut

use common::sense;

# should come before anything else, so all modules
# will be loaded on each restart
BEGIN {
   if (@ARGV == 1 && $ARGV[0] =~ /^\[/) {
      require JSON::XS;
      @ARGV = @{ JSON::XS->new->utf8->decode (shift) };
   } else {
      for (@ARGV) {
         if (/^[\[\{\"]/) {
            require JSON::XS;
            $_ = JSON::XS->new->utf8->allow_nonref->decode ($_);
         }
      }
   }

   if ($ARGV[0] eq "run") {
      shift;

      # d'oh
      require AnyEvent::Watchdog;
      # only now can we load additional modules

      require AnyEvent;

      require AnyEvent::Watchdog::Util;
      AnyEvent::Watchdog::Util::autorestart (1);
      AnyEvent::Watchdog::Util::heartbeat (300);

      require AnyEvent::MP::Kernel;
      AnyEvent::MP::Kernel::configure (@ARGV);

      AnyEvent::detect () eq "AnyEvent::Impl::EV"
         ? EV::loop ()
         : AE::cv ()->recv;
   }
}

use Carp ();

use JSON::XS;

use AnyEvent;
use AnyEvent::Util;

use AnyEvent::MP;
use AnyEvent::MP::Config;

sub my_run_cmd {
   my ($cmd) = @_;

   my $cv = &run_cmd;
   my $status = $cv->recv;

   $status
      and die "@$cmd: command failed with exit status $status.";
}

sub gen_cert {
   my_run_cmd [qw(openssl req 
                     -new -nodes -x509 -days 3650
                     -newkey rsa:2048 -keyout /dev/fd/3
                     -batch -subj /CN=AnyEvent::MP
              )],
      "<", "/dev/null",
      ">" , \my $cert,
      "3>", \my $key,
      "2>", "/dev/null";

   "$cert$key"
}

sub init {
   configure profile => "aemp", nodeid => "aemp/%n/%u";
}

our $cfg     = AnyEvent::MP::Config::config;
our $profile = $cfg;

sub trace {
   my ($node) = @_;
   my $cv = AE::cv;
   my %seen;

   my $to = AE::timer 15, 0, sub { exit 1 };

   init;

   my $reply = port {
      my ($node, undef, @neigh) = @_;

      @neigh = grep $_ ne $NODE, @neigh;

      print $node, " -> ", (join " ", @neigh), "\n";

      for (@neigh) {
         unless ($seen{$_}++) {
            $cv->begin;
            AnyEvent::MP::Kernel::eval_on $_, "AnyEvent::MP::Kernel::up_nodes" => $SELF => $_;
         }
      }

      $cv->end;
   };

   $cv->begin;
   snd $reply, $node => undef, AnyEvent::MP::Kernel::up_nodes;

   $cv->recv;
}

sub shell {
   init;

   my $node = shift @ARGV || $NODE;
   $| = 1;

   print <<EOF;
Entering interactive shell - no commandline editing of course (use rlfe etc.).

\=           display a list of nodes
\=name       switch to another node
package P   switch to package P when evaluating
\$ECHO       contains the name of a port that echos everything sent to it

EOF
   my $pkg = "AnyEvent::MP::Kernel";
   my $cv = AE::cv;
   my $echo = port {
      print "\n  ECHO<$AnyEvent::MP::Kernel::SRCNODE->{id}> ", JSON::XS::encode_json \@_, "\n$node $pkg> ";
   };
   print "$node $pkg> ";
   my $t = AE::io *STDIN, 0, sub {
      chomp (my $line = <STDIN>);

      if ($line =~ s/^=//) {
         if (length $line) {
            $node = $line;
         } else {
            print +(join " ", AnyEvent::MP::Kernel::up_nodes), "\n";
         }
      } elsif ($line =~ /^\s*package\s+(\S+)\s*;?\s*$/) {
         $pkg = $1;
      } elsif ($line =~ /\S/) {
         my $time = AE::time;
         AnyEvent::MP::Kernel::eval_on
            $node,
            "package $pkg; my \$ECHO = '$echo'; $line",
            port {
               kil $SELF;

               my ($err, @res) = @_;

               $time = AE::time - $time;

               print "\n  $node: $line\n";
               if (length $err) {
                  print "  $err @res";
               } else {
                  print "  ", JSON::XS::encode_json \@res;
               }
               printf "\n  %0.3fs\n", $time;
               print "$node $pkg> ";
            }
         ;
      }

      print "$node $pkg> ";
   };
   $cv->recv;
}

sub node_eval {
   my ($node, $expr) = @_;

   init;

   my $cv = AE::cv;
   my $to = AE::timer 5, 0, sub { exit 1 };
   AnyEvent::MP::Kernel::eval_on $node, $expr, port { &$cv };
   mon $node, $cv;

   my ($err, @res) = $cv->recv;

   die "$err @res" if length $err;

   print +(substr JSON::XS->new->encode (\@res), 1, -1), "\n";
}

sub docmd;

our %CMD = (
   snd => sub {
      my $port = shift @ARGV;
      init;

      snd $port, @ARGV; @ARGV = ();

      my $cv = AE::cv;
      my $to = AE::timer 5, 0, sub { exit 1 };
      mon $port, $cv;
      my $reply = port sub { &$cv };
      snd node_of $port, snd => $reply, "message sent successfully";

      print join " ", $cv->recv, "\n";
   },

   cal => sub {
      my $port = shift @ARGV;
      init;

      my $cv = AE::cv;
      cal $port, @ARGV, sub { &$cv }; @ARGV = ();

      print +(substr JSON::XS->new->encode ([$cv->recv]), 1, -1), "\n";
   },

   mon => sub {
      my $port = shift @ARGV;
      init;

      mon $port, my $cv = AE::cv;
      print join " ", $cv->recv, "\n";
   },

   eval => sub {
      my $node = node_of shift @ARGV;
      my $expr = join " ", @ARGV; @ARGV = ();
      node_eval $node, $expr;
   },

   shell => \&shell,

   trace => sub {
      @ARGV >= 1
         or die "node id missing\n";

      trace shift @ARGV;
   },
   restart => sub {
      my $node = node_of shift @ARGV;
      node_eval $node, 'my $w; $w = AE::idle sub { '
                       . 'undef $w; '
                       . 'use AnyEvent::Watchdog::Util ();'
                       . 'AnyEvent::Watchdog::Util::restart'
                       . '}; ()';
   },

   setnodeid => sub {
      @ARGV >= 1
         or die "shared secret missing\n";

      $profile->{nodeid} = shift @ARGV;
      ++$cfg->{dirty};
   },
   delnodeid => sub {
      delete $profile->{nodeid};
      ++$cfg->{dirty};
   },

   setsecret => sub {
      @ARGV >= 1
         or die "shared secret missing\n";

      $profile->{secret} = shift @ARGV;
      ++$cfg->{dirty};
   },
   gensecret => sub {
      $profile->{secret} = AnyEvent::MP::Kernel::nonce62 180; # ~1071 bits
      ++$cfg->{dirty};
   },
   delsecret => sub {
      delete $profile->{secret};
      ++$cfg->{dirty};
   },

   setcert => sub {
      @ARGV >= 1
         or die "key+certificate pem filename missing\n";

      my $certfile = shift @ARGV;

      open my $fh, "<", $certfile
         or die "$certfile: $!";

      local $/;
      $profile->{cert} = <$fh>;
      ++$cfg->{dirty};
   },
   gencert => sub {
      $profile->{cert} = gen_cert;
      ++$cfg->{dirty};
   },
   delcert => sub {
      delete $profile->{cert};
      ++$cfg->{dirty};
   },

   setbinds => sub {
      @ARGV >= 1
         or die "bind addresses missing\n";
      my $list = shift @ARGV;
      $profile->{binds} = ref $list ? $list : [split /,/, $list];
      ++$cfg->{dirty};
   },
   delbinds => sub {
      delete $profile->{binds};
      ++$cfg->{dirty};
   },
   addbind => sub {
      @ARGV >= 1
         or die "bind address missing\n";
      my $bind = shift @ARGV;

      @{ $profile->{binds} } = grep $_ ne $bind, @{ $profile->{binds} };
      push @{ $profile->{binds} }, $bind;
      ++$cfg->{dirty};
   },
   delbind => sub {
      @ARGV >= 1
         or die "bind address missing\n";
      my $bind = shift @ARGV;

      @{ $profile->{binds} } = grep $_ ne $bind, @{ $profile->{binds} };
      ++$cfg->{dirty};
   },

   setseeds => sub {
      @ARGV >= 1
         or die "seed addresses missing\n";
      my $list = shift @ARGV;
      $profile->{seeds} = ref $list ? $list : [split /,/, $list];
      ++$cfg->{dirty};
   },
   delseeds => sub {
      delete $profile->{seeds};
      ++$cfg->{dirty};
   },
   addseed => sub {
      @ARGV >= 1
         or die "seed address missing\n";
      my $seed = shift @ARGV;

      @{ $profile->{seeds} } = grep $_ ne $seed, @{ $profile->{seeds} };
      push @{ $profile->{seeds} }, $seed;
      ++$cfg->{dirty};
   },
   delseed => sub {
      @ARGV >= 1
         or die "seed address missing\n";
      my $seed = shift @ARGV;

      @{ $profile->{seeds} } = grep $_ ne $seed, @{ $profile->{seeds} };
      ++$cfg->{dirty};
   },

   setservices => sub {
      @ARGV >= 1
         or die "service specifications missing\n";
      my $list = shift @ARGV;
      $profile->{services} = ref $list ? $list : [split /,/, $list];
      ++$cfg->{dirty};
   },
   delservices => sub {
      delete $profile->{services};
      ++$cfg->{dirty};
   },
   addservice => sub {
      @ARGV >= 1
         or die "service specification missing\n";
      my $service = shift @ARGV;
      push @{ $profile->{services} }, $service;
      ++$cfg->{dirty};
   },
   delservice => sub {
      @ARGV >= 1
         or die "service specification missing\n";
      my $service = shift @ARGV;
      for (0 .. $#{ $profile->{services} }) {
         next unless $profile->{services}[$_] eq $service;
         splice @{ $profile->{services} }, $_, 1;
         last;
      }
      ++$cfg->{dirty};
   },

   profile => sub {
      @ARGV >= 1
         or die "profile name is missing\n";
      my $name = shift @ARGV;

      $profile = $cfg->{profile}{$name} ||= {};
      ++$cfg->{dirty};
   },
   delprofile => sub {
      @ARGV >= 1
         or die "profile name is missing\n";
      my $name = shift @ARGV;

      delete $cfg->{profile}{$name};
      ++$cfg->{dirty};
   },
   setparent => sub {
      @ARGV >= 1
         or die "profile name is missing\n";

      $profile->{parent} = shift @ARGV;
      ++$cfg->{dirty};
   },
   delparent => sub {
      delete $profile->{parent};
      ++$cfg->{dirty};
   },
   showprofile => sub {
      @ARGV >= 1
         or die "profile name is missing\n";
      my $name = shift @ARGV;

      print JSON::XS->new->pretty->encode ($cfg->{profile}{$name} || {});
   },
   showconfig => sub {
      my $name = @ARGV ? shift @ARGV : AnyEvent::MP::Kernel::nodename;

      my $profile = AnyEvent::MP::Config::find_profile $name, @ARGV;
      @ARGV = ();

      # make it look nicer:
      delete $profile->{profile};
      delete $profile->{parent};

      print JSON::XS->new->pretty->encode ($profile);
   },

   # undocumented
   _resolve => sub {
      print +(join ",", (AnyEvent::MP::Kernel::_resolve shift @ARGV)->recv), "\n";
   },
);

for my $attr (qw(
   monitor_timeout connect_interval framing_format auth_offer
   auth_accept autocork nodelay secure
)) {
   $CMD{"set$attr"} = sub {
      @ARGV >= 1
         or die "$attr value is missing\n";

      $profile->{$attr} = shift @ARGV;
      ++$cfg->{dirty};
   };
   $CMD{"del$attr"} = sub {
      delete $profile->{$attr};
      ++$cfg->{dirty};
   };
}

for (keys %CMD) {
   $CMD{$1} = $CMD{$_} if /^set(.*)$/;
}

sub docmd {
   my $cmd = shift @ARGV;

   $CMD{$cmd}
      or die "$cmd: no such aemp command (try perldoc aemp, or man aemp)";

   $CMD{$cmd}();
}

@ARGV
   or die "Usage: aemp subcommand ... (try perldoc aemp, or man aemp)\n";

docmd while @ARGV;


Revision:	1.55
Committed:	Thu Mar 8 21:37:51 2012 UTC (12 years, 2 months ago) by root
Branch:	MAIN
Changes since 1.54:	+6 -5 lines
Log Message:	* empty log message *