[ViewVC] Annotation of: cvs/AnyEvent/Changes

Revision history for Perl extension AnyEvent.

        - try to work around yet another windows bug: failed connects are reported
          as if it were out-of-band data. windows users: you suck. Only
          EV, Glib, Event and the pure perl backend can handle this condition.
        - optimize write algorithm in AnyEvent::Handle.
        - properly parse PERL_ANYEVENT_PROTOCOLS and use the info correctly.
        - tcp_connect now properly iterates through all targets.
        - check wether IPv6 sockets can actually be created, otherwise, disable ipv6
          support entirely. also hardcode some AF_INEt6 constants for the
          sake of perl 5.8.
        - vastly improved nameserver/suffix detection algorithm for windows
          (still a hack...)
        - try to use a fallback dns server if no dns servers could be found.
        - splatter around some local $SIG{__DIE__}'s to work around bad
          die handlers.

4.03 Sun May 25 05:05:57 CEST 2008
        - work around perl bugs on windows, where perl returns undocumented
          error codes for sysread, syswrite etc.
        - fix AnyEvent::Handle::unshift_read to really unshift and not push.
        - AnyEvent::Handle could sometimes stumble over 0-byte writes.
        - fix unpack_sockaddr, now works for AF_INET6 sockaddr's.
        - updated documentation.
        - lots of workarounds for perl 5.8 quirks.
        - implement a more flexible type system for both reads and writes
          in AnyEvent::Handle.
        - support IPv6 in tcp_server.
        - pass local hostname and port to the prepare callback in tcp_server.
        - make types extendable in AnyEvent::Handle.
        - croak, not die, in AnyEvent::Handle;

4.0  Sat May 24 19:58:08 CEST 2008
        - added (experimental) AnyEvent::DNS module.
        - added (experimental) AnyEvent::Socket module.
        - added (experiemntal) support for TLS/SSL in AnyEvent::Handle.
        - make condvar->end call ->send as documented.
        - make condvar constructor support the documented cb => argument.
        - overload condvars so you can use them instead of code references.
        - support more of the POSIX forms instead of a pure dotted quad for
          verbatim ip addresses.
        - AnyEvent::Socket::inet_aton will use AnyEvent::DNS now and not fork anymore.
        - try very hard not to freeze on broken windows perls.
        - make on_eof optional in AnyEvent::Handle.
        - support service names in tcp_connect and tcp_server.
        - work around netbsd/openbsd bug causing unix sockets not to
          become writable untill empty.
        - only make a dummy read for error detection when getpeername
          returns ENOTCONN.
        - defend AnyEvent::Util::inet_aton against Coro::LWP brutal
          override.
        - new AnyEvent::Guard::cancel.

3.5  Sat May 17 23:17:14 CEST 2008
        - gracefully deal with systems not defining CLOCK_MONOTONIC
          (as opposed to not supporting the clock itself, which worked in 3.41).
        - added AnyEvent::Util::tcp_connect and AnyEvent::Util::tcp_server
          helpers, to replace the ill-designed AnyEvent::Socket class.
        - added some examples (eg/connect, eg/handle).
        - added AnyEvent::Util::guard.
        - AnyEvent::Util now exports most of its functions.
        - fixed a bug in *_read_chunk, where the callback was called with $self as
          first and second argument.
        - simplified and fixed regex handling in AnyEvent::Handle::*_read_line.
        - fix manpage condvars examples to use new syntax.
        - considerably improve inet_aton with EV::ADNS backend to support
          cname chains (common dns configuration bug, e.g. with www.google.de)
          and aaaa records if no a record could be found.

3.41 Sun May 11 19:53:13 CEST 2008
        - work around a bug in perl 5.8.8's local. Reported by Yi Ma Mao.

3.4  Sun May 11 00:29:25 CEST 2008
        - complete re-implementation of condvars with a hopefully much mroe useful
          API (backward compatible functions exist but are undocumented).
        - AnyEvent::Handle fully rewritten with a hopefully more powerful API
          (still subject to change).
        - take advantage of CLOCK_MONOTONIC, if available, in AnyEvent::Impl::Perl.
        - provide AnyEvent::post_detect and @AnyEvent::post_detect, which
          allows module authors to avoid forcing event loop detection.
          (used by Coro::AIO, Coro::BDB, Coro::AnyEvent for example).
        - remove coro backends: Coro now provides generic support for AnyEvent
          via Coro::AnyEvent.

3.3  Mon Apr 28 09:51:06 CEST 2008
        - added AnyEvent::Handle, AnyEvent::Socket and AnyEvent::Util modules.
        - fix a bug in the pure perl backend that kept watchers alive
          when multiple watchers were registered for the same fh/poll combo.
        - add a benchmark section showing AnyEvent overhead and comparing
          the different event loops with each other.
        - prefer pure perl over tk when autoprobing, as it's about as fast,
          but doesn't crash with many watchers.
        - declare Qt support non-experimental.
        - clarify the confusing section about the file descriptor being
          kept alive.
        - document the race between loading of an event module and
          child processes exiting.
        - support POE as "backend" (with some caveats, POE is not generic
          enough, and darn slow).
        - support Wx and Prima through POE.
        - optimise perl backend to use 20% less memory and take advantage
          of typical timeout behaviour. It can now compete with
          select/poll-based C event loops in most cases (it is usually
          faster than Event and Glib :).
        - roughly cut EV memory use in half and increase its speed by 30%,
          by removing undocumented functionality. Did something similar
          to other event loops where possible.

3.2  Thu Apr 24 10:10:40 CEST 2008
        - do not die when anyevent watchers are destroyed while running callbacks
          in the pureperl backend (could only happen when two watchers are registered
          for the same fh/poll combo).
        - support autoloading for child watchers, was broken in all versions.
        - implement PERL_ANYEVENT_MODEL env variable.
        - (experimental) implement interface to the (very crashy/buggy) Event::Lib module.
        - (experimental) implement interface to the Qt module (cannot be autoprobed).
        - this release is IO:AnyEvent-proof.

3.12 Tue Apr 22 07:11:46 CEST 2008
        - reinstate AUTHOR section that got lost somehow.
        - do not hang in the testsuite with badly broken perls (activestate,
          strawberry...), but instead diagnose the problem and continue.
        - use INT instead of CHLD in an attempt to support broken windows perls
          better (this decreases the test quality, unfortunately).
        - do not send the signal to the process group
          (no problem for CHLD, bad for INT :).

3.11 Sat Apr 19 06:57:31 CEST 2008
        - major documentation rework.
        - document the fact that child watchers only watch for zombies.
        - fix the child watcher example.

3.1  Wed Apr 16 17:09:01 CEST 2008
        - work around recurring bugs in Tk by dup'ing filehandles, the
          only method with good success chances on Tk (the bugs apparently
          don't get fixed anytime soon).
        - lift the restriction of only one watcher per fh direction
          (as the Tk bug workaround also lifts it and only Tk imposed
          such strong limits).
        - changed probe order to prefer coro adaptors.
        - explain why recursion into the event loop is not supported
          unless the backend supports it (only Coro::EV does without
          any restrictions...).
        - add simple manpages for all backend modules.

3.0  Mon Apr  7 21:30:23 CEST 2008
        - Coro::Signal changed semantics, roll our own, also cleaning
          up the Coro implementation in general.
        - rename Coro backend to CoroEvent.
        - add some decision helping paragraph to the manpage that should
          help people to decide whether AnyEvent is the right thing for them.

2.9  Mon Jan 28 13:31:54 CET 2008
        - update for EV 3.0 API changes.

2.8  Sun Nov 25 15:06:03 CET 2007
        - waitpid can validly return 0. accept this fact of life
          instead of reporting it to any watchers.

2.7  Fri Nov 23 11:41:14 CET 2007
        - force use of AnyEvent::Impl::Perl in testsuite, there is
          too much breakage outside AnyEvent.
        - deliver signals synchronously in AnyEvent::Impl::Perl
          or any other event loop that relies on AnyEvents child
          watcher emulation. *Could* help with hanging testsuite
          (except when Event or EV are installed).

2.6  Fri Nov  9 20:36:35 CET 2007
        - fix bug in testsuite.
        - move EV adaptor modules to AnyEvent.
        - add Coro+EV adaptor module.

2.55 Tue Nov  6 17:41:32 CET 2007
        - add EV to the list of supported event models.
        - do not auto-reset pid watchers, pass pid and status to them.
        - allow a pid of zero to watch for all children in child watchers.

2.54 Wed Jul 18 17:36:23 CEST 2007
        - work around a perl bug that results in
          BEGIN not safe after errors--compilation aborted without
          any discernible reason or error message by once
          again not use'ing strict.

2.53 Sun Jul  8 10:51:53 CEST 2007
        - make Glib interface work again (spotted by elmex).

2.52 Wed Mar  7 18:36:16 CET 2007
        - child watchers stopped working permanently when
          all current child watchers were destroyed.

2.51 Mon Dec 11 21:33:24 CET 2006
        - work around bugs in perl where eval "require Module" returns
          true even if the module couldn't be loaded :/.

2.5  Mon Dec 11 02:15:28 CET 2006
        - avoid $AUTOLOAD because many perls corrupt it.
        - AnyEvent::detect forces autodetection.
        - implement signal watchers (experimental)
          (Tk does not support async signals (<= 804.027 at least),
          so they might get delayed indefinitely on Tk).
        - implement child watchers (experimental).
        - moved default condvar implementation into base module, simplifying
          most implementation modules.

2.1  Fri Nov 24 15:50:48 CET 2006
        - better docs.
        - simple testsuite.
        - added AnyEvent->one_event method for special purposes.

2.0  Wed Nov  1 02:21:30 CET 2006
        - INCOMPATIBLE CHANGE: poll can now either be "r" or "w" but not both.
        - INCOMPATIBLE CHANGE: io watcher callbacks have no arguments anymore.
        - EXPERIMENTAL:
          new pure-perl model added, AnyEvent now always finds a suitable
          event model.
        - improved documentation.
        - reduced cpu overhead.

1.02 Fri Jan 13 14:15:40 CET 2006
        - add COPYING to clarify license.

1.01 Sun Jan  8 05:48:09 CET 2006
        - correctly cancel Event timers, avoid memory leaks.

1.0  Sun Jan  8 05:40:58 CET 2006
        - allow third-party interfaces to be added at runtime.
        - fix version number.

0.9  Fri Dec 30 02:25:41 CET 2005
        - fixed errors in the documentation.
        - going back to using $VERSION as "load check",
          as suggested by Jörn Reder. Let's see why I stopped using
          this method.
        - add 'hup' to the list of events to receive for glib
          and generate 'rw' events for it, as some versions of
          glib seem to require this, while this breaks other
          (older) versions of glib.
        - implemented PERL_ANYEVENT_VERBOSE env variable.

0.3   Sun Dec  4 10:43:33 CET 2005
        - no changes to the code.
        - fixed documentation.
        - clarified some corner cases.
        - vastly improved documentation with a long example.

0.2   Thu Dec  1 22:18:49 CET 2005
        - check whether a valid method was called, to avoid endless loops.
        - move condvars into their own class (cleaner, safer).
        - don't die when some modules are not available.
        - Tk is too broken to allow for words. Will work once Tk works.

0.1   Thu Dec  1 19:44:57 CET 2005
        - spiced up and cleaned up for release.

0.01  Tue Sep 21 18:12:09 CEST 2004
        - original version; copied from Convert::Scalar.

Revision:	1.112
Committed:	Mon May 26 06:03:20 2008 UTC (15 years, 11 months ago) by root
Branch:	MAIN
Changes since 1.111:	+1 -0 lines
Log Message:	* empty log message *
#	User	Rev	Content
1	root	1.1	Revision history for Perl extension AnyEvent.
2
3	root	1.109	- try to work around yet another windows bug: failed connects are reported
4	root	1.110	as if it were out-of-band data. windows users: you suck. Only
5			EV, Glib, Event and the pure perl backend can handle this condition.
6	root	1.111	- optimize write algorithm in AnyEvent::Handle.
7	root	1.106	- properly parse PERL_ANYEVENT_PROTOCOLS and use the info correctly.
8	root	1.112	- tcp_connect now properly iterates through all targets.
9	root	1.104	- check wether IPv6 sockets can actually be created, otherwise, disable ipv6
10	root	1.107	support entirely. also hardcode some AF_INEt6 constants for the
11			sake of perl 5.8.
12	root	1.106	- vastly improved nameserver/suffix detection algorithm for windows
13			(still a hack...)
14			- try to use a fallback dns server if no dns servers could be found.
15	root	1.108	- splatter around some local $SIG{__DIE__}'s to work around bad
16			die handlers.
17	root	1.104
18	root	1.102	4.03 Sun May 25 05:05:57 CEST 2008
19	root	1.100	- work around perl bugs on windows, where perl returns undocumented
20			error codes for sysread, syswrite etc.
21	root	1.96	- fix AnyEvent::Handle::unshift_read to really unshift and not push.
22	root	1.97	- AnyEvent::Handle could sometimes stumble over 0-byte writes.
23	root	1.101	- fix unpack_sockaddr, now works for AF_INET6 sockaddr's.
24	root	1.100	- updated documentation.
25	root	1.103	- lots of workarounds for perl 5.8 quirks.
26	root	1.98	- implement a more flexible type system for both reads and writes
27			in AnyEvent::Handle.
28	root	1.101	- support IPv6 in tcp_server.
29			- pass local hostname and port to the prepare callback in tcp_server.
30	root	1.99	- make types extendable in AnyEvent::Handle.
31	root	1.100	- croak, not die, in AnyEvent::Handle;
32	root	1.96
33	root	1.95	4.0 Sat May 24 19:58:08 CEST 2008
34	root	1.88	- added (experimental) AnyEvent::DNS module.
35			- added (experimental) AnyEvent::Socket module.
36	root	1.93	- added (experiemntal) support for TLS/SSL in AnyEvent::Handle.
37	root	1.90	- make condvar->end call ->send as documented.
38			- make condvar constructor support the documented cb => argument.
39	root	1.94	- overload condvars so you can use them instead of code references.
40	root	1.93	- support more of the POSIX forms instead of a pure dotted quad for
41	root	1.89	verbatim ip addresses.
42	root	1.88	- AnyEvent::Socket::inet_aton will use AnyEvent::DNS now and not fork anymore.
43	root	1.87	- try very hard not to freeze on broken windows perls.
44	root	1.86	- make on_eof optional in AnyEvent::Handle.
45	root	1.83	- support service names in tcp_connect and tcp_server.
46	root	1.84	- work around netbsd/openbsd bug causing unix sockets not to
47			become writable untill empty.
48	root	1.81	- only make a dummy read for error detection when getpeername
49			returns ENOTCONN.
50	root	1.82	- defend AnyEvent::Util::inet_aton against Coro::LWP brutal
51			override.
52	root	1.91	- new AnyEvent::Guard::cancel.
53	root	1.81
54	root	1.80	3.5 Sat May 17 23:17:14 CEST 2008
55	root	1.79	- gracefully deal with systems not defining CLOCK_MONOTONIC
56			(as opposed to not supporting the clock itself, which worked in 3.41).
57	root	1.77	- added AnyEvent::Util::tcp_connect and AnyEvent::Util::tcp_server
58			helpers, to replace the ill-designed AnyEvent::Socket class.
59			- added some examples (eg/connect, eg/handle).
60			- added AnyEvent::Util::guard.
61			- AnyEvent::Util now exports most of its functions.
62	elmex	1.74	- fixed a bug in *_read_chunk, where the callback was called with $self as
63			first and second argument.
64	root	1.77	- simplified and fixed regex handling in AnyEvent::Handle::*_read_line.
65	root	1.72	- fix manpage condvars examples to use new syntax.
66	root	1.78	- considerably improve inet_aton with EV::ADNS backend to support
67			cname chains (common dns configuration bug, e.g. with www.google.de)
68			and aaaa records if no a record could be found.
69	root	1.72
70	root	1.71	3.41 Sun May 11 19:53:13 CEST 2008
71			- work around a bug in perl 5.8.8's local. Reported by Yi Ma Mao.
72
73	root	1.70	3.4 Sun May 11 00:29:25 CEST 2008
74			- complete re-implementation of condvars with a hopefully much mroe useful
75			API (backward compatible functions exist but are undocumented).
76	root	1.69	- AnyEvent::Handle fully rewritten with a hopefully more powerful API
77			(still subject to change).
78	root	1.63	- take advantage of CLOCK_MONOTONIC, if available, in AnyEvent::Impl::Perl.
79	root	1.68	- provide AnyEvent::post_detect and @AnyEvent::post_detect, which
80	root	1.67	allows module authors to avoid forcing event loop detection.
81			(used by Coro::AIO, Coro::BDB, Coro::AnyEvent for example).
82	root	1.66	- remove coro backends: Coro now provides generic support for AnyEvent
83			via Coro::AnyEvent.
84	root	1.63
85	root	1.62	3.3 Mon Apr 28 09:51:06 CEST 2008
86			- added AnyEvent::Handle, AnyEvent::Socket and AnyEvent::Util modules.
87	root	1.55	- fix a bug in the pure perl backend that kept watchers alive
88			when multiple watchers were registered for the same fh/poll combo.
89	root	1.54	- add a benchmark section showing AnyEvent overhead and comparing
90			the different event loops with each other.
91	root	1.56	- prefer pure perl over tk when autoprobing, as it's about as fast,
92			but doesn't crash with many watchers.
93	root	1.62	- declare Qt support non-experimental.
94	root	1.56	- clarify the confusing section about the file descriptor being
95			kept alive.
96			- document the race between loading of an event module and
97			child processes exiting.
98	root	1.53	- support POE as "backend" (with some caveats, POE is not generic
99	root	1.54	enough, and darn slow).
100	root	1.53	- support Wx and Prima through POE.
101	root	1.60	- optimise perl backend to use 20% less memory and take advantage
102	root	1.62	of typical timeout behaviour. It can now compete with
103	root	1.60	select/poll-based C event loops in most cases (it is usually
104			faster than Event and Glib :).
105	root	1.59	- roughly cut EV memory use in half and increase its speed by 30%,
106	root	1.62	by removing undocumented functionality. Did something similar
107			to other event loops where possible.
108	root	1.53
109	root	1.50	3.2 Thu Apr 24 10:10:40 CEST 2008
110	root	1.51	- do not die when anyevent watchers are destroyed while running callbacks
111			in the pureperl backend (could only happen when two watchers are registered
112			for the same fh/poll combo).
113			- support autoloading for child watchers, was broken in all versions.
114	root	1.47	- implement PERL_ANYEVENT_MODEL env variable.
115	root	1.49	- (experimental) implement interface to the (very crashy/buggy) Event::Lib module.
116			- (experimental) implement interface to the Qt module (cannot be autoprobed).
117	root	1.52	- this release is IO:AnyEvent-proof.
118	root	1.47
119	root	1.46	3.12 Tue Apr 22 07:11:46 CEST 2008
120			- reinstate AUTHOR section that got lost somehow.
121			- do not hang in the testsuite with badly broken perls (activestate,
122			strawberry...), but instead diagnose the problem and continue.
123			- use INT instead of CHLD in an attempt to support broken windows perls
124			better (this decreases the test quality, unfortunately).
125			- do not send the signal to the process group
126			(no problem for CHLD, bad for INT :).
127
128	root	1.45	3.11 Sat Apr 19 06:57:31 CEST 2008
129			- major documentation rework.
130			- document the fact that child watchers only watch for zombies.
131			- fix the child watcher example.
132
133	root	1.43	3.1 Wed Apr 16 17:09:01 CEST 2008
134	root	1.40	- work around recurring bugs in Tk by dup'ing filehandles, the
135	root	1.43	only method with good success chances on Tk (the bugs apparently
136			don't get fixed anytime soon).
137	root	1.42	- lift the restriction of only one watcher per fh direction
138			(as the Tk bug workaround also lifts it and only Tk imposed
139			such strong limits).
140	root	1.41	- changed probe order to prefer coro adaptors.
141			- explain why recursion into the event loop is not supported
142			unless the backend supports it (only Coro::EV does without
143			any restrictions...).
144			- add simple manpages for all backend modules.
145	root	1.40
146	root	1.39	3.0 Mon Apr 7 21:30:23 CEST 2008
147	root	1.38	- Coro::Signal changed semantics, roll our own, also cleaning
148			up the Coro implementation in general.
149			- rename Coro backend to CoroEvent.
150			- add some decision helping paragraph to the manpage that should
151	root	1.44	help people to decide whether AnyEvent is the right thing for them.
152	root	1.38
153	root	1.37	2.9 Mon Jan 28 13:31:54 CET 2008
154			- update for EV 3.0 API changes.
155
156	root	1.36	2.8 Sun Nov 25 15:06:03 CET 2007
157			- waitpid can validly return 0. accept this fact of life
158			instead of reporting it to any watchers.
159
160	root	1.35	2.7 Fri Nov 23 11:41:14 CET 2007
161	root	1.34	- force use of AnyEvent::Impl::Perl in testsuite, there is
162			too much breakage outside AnyEvent.
163	root	1.35	- deliver signals synchronously in AnyEvent::Impl::Perl
164			or any other event loop that relies on AnyEvents child
165			watcher emulation. Could help with hanging testsuite
166			(except when Event or EV are installed).
167	root	1.34
168	root	1.33	2.6 Fri Nov 9 20:36:35 CET 2007
169	root	1.32	- fix bug in testsuite.
170			- move EV adaptor modules to AnyEvent.
171			- add Coro+EV adaptor module.
172	root	1.26
173	root	1.31	2.55 Tue Nov 6 17:41:32 CET 2007
174	root	1.27	- add EV to the list of supported event models.
175	root	1.30	- do not auto-reset pid watchers, pass pid and status to them.
176	root	1.29	- allow a pid of zero to watch for all children in child watchers.
177	root	1.27
178	root	1.25	2.54 Wed Jul 18 17:36:23 CEST 2007
179			- work around a perl bug that results in
180			BEGIN not safe after errors--compilation aborted without
181			any discernible reason or error message by once
182			again not use'ing strict.
183
184	root	1.24	2.53 Sun Jul 8 10:51:53 CEST 2007
185			- make Glib interface work again (spotted by elmex).
186
187	root	1.22	2.52 Wed Mar 7 18:36:16 CET 2007
188			- child watchers stopped working permanently when
189	root	1.23	all current child watchers were destroyed.
190	root	1.22
191	root	1.21	2.51 Mon Dec 11 21:33:24 CET 2006
192			- work around bugs in perl where eval "require Module" returns
193			true even if the module couldn't be loaded :/.
194
195	root	1.20	2.5 Mon Dec 11 02:15:28 CET 2006
196	root	1.19	- avoid $AUTOLOAD because many perls corrupt it.
197	root	1.20	- AnyEvent::detect forces autodetection.
198			- implement signal watchers (experimental)
199			(Tk does not support async signals (<= 804.027 at least),
200			so they might get delayed indefinitely on Tk).
201			- implement child watchers (experimental).
202			- moved default condvar implementation into base module, simplifying
203			most implementation modules.
204	root	1.14
205	root	1.18	2.1 Fri Nov 24 15:50:48 CET 2006
206	root	1.16	- better docs.
207			- simple testsuite.
208	root	1.17	- added AnyEvent->one_event method for special purposes.
209	root	1.16
210	root	1.15	2.0 Wed Nov 1 02:21:30 CET 2006
211	root	1.13	- INCOMPATIBLE CHANGE: poll can now either be "r" or "w" but not both.
212			- INCOMPATIBLE CHANGE: io watcher callbacks have no arguments anymore.
213			- EXPERIMENTAL:
214			new pure-perl model added, AnyEvent now always finds a suitable
215			event model.
216	root	1.12	- improved documentation.
217			- reduced cpu overhead.
218
219	root	1.11	1.02 Fri Jan 13 14:15:40 CET 2006
220			- add COPYING to clarify license.
221
222	root	1.10	1.01 Sun Jan 8 05:48:09 CET 2006
223			- correctly cancel Event timers, avoid memory leaks.
224
225	root	1.9	1.0 Sun Jan 8 05:40:58 CET 2006
226	root	1.8	- allow third-party interfaces to be added at runtime.
227			- fix version number.
228
229	root	1.7	0.9 Fri Dec 30 02:25:41 CET 2005
230	root	1.6	- fixed errors in the documentation.
231	root	1.7	- going back to using $VERSION as "load check",
232			as suggested by Jörn Reder. Let's see why I stopped using
233			this method.
234			- add 'hup' to the list of events to receive for glib
235			and generate 'rw' events for it, as some versions of
236			glib seem to require this, while this breaks other
237			(older) versions of glib.
238			- implemented PERL_ANYEVENT_VERBOSE env variable.
239	root	1.6
240	root	1.5	0.3 Sun Dec 4 10:43:33 CET 2005
241			- no changes to the code.
242			- fixed documentation.
243			- clarified some corner cases.
244			- vastly improved documentation with a long example.
245
246	root	1.3	0.2 Thu Dec 1 22:18:49 CET 2005
247	root	1.44	- check whether a valid method was called, to avoid endless loops.
248	root	1.4	- move condvars into their own class (cleaner, safer).
249			- don't die when some modules are not available.
250			- Tk is too broken to allow for words. Will work once Tk works.
251	root	1.3
252	root	1.2	0.1 Thu Dec 1 19:44:57 CET 2005
253			- spiced up and cleaned up for release.
254
255	root	1.1	0.01 Tue Sep 21 18:12:09 CEST 2004
256			- original version; copied from Convert::Scalar.
257