[ViewVC] Annotation of: cvs/AnyEvent/Changes

Revision history for Perl extension AnyEvent.

4.15 Fri Jun  6 13:00:46 CEST 2008
        - the pure perl backend would keep some watchers alive when more than
          one watcher was registered for the same fd.
        - new "packstring" and "storable" read and write types
          for AnyEvent::Handle.
        - allow on_eof handler to be called after on_errro with EPIPE returns.
        - do not immediately call on_read callback in handle constructor.

4.14 Thu Jun  5 20:29:31 CEST 2008
        - Fixed a bug in DNS SRV priority sorting.
        - AnyEvent::Util::guard now reports runtime errors while
          executing the guard block as warnings.
        - handle 0-byte-reads just before EOF correctly in AnyEvent::Handle.

4.13 Thu Jun  5 00:47:59 CEST 2008
        - AnyEvent::DNS only followed cname chains with length 2,
          contrary to documentation. bumped it up to 10, thanks to
          microsoft, the current broken-dns-config-king.
        - AnyEvent::DNS didn't check for socket return status
          but instead relied on perl not creating filehandles in that
          case - too bad it gives you a bogus file handle (reported
          and analysed by Vladimir Timofeev).
        - fix queue management logic in AnyEvent::Handle:
          when on_read was registered, the queue was empty
          and no progress could be made AnyEvent::Handle would
          enter an endless loop.
        - correctly start reading again when the handle became
          busy again after idling.
        - correctly treat tls shut-downs as EOF condition
          (for the time being, would be nice to have a callback for that).
        - correctly call eof callback under all conditions
          (hopefully).
        - the timeout callback did not expect that $self can go
          away any time.

4.12 Tue Jun  3 10:58:04 CEST 2008
        - include AnyEvent::Intro, a tutorial for anyevent,
          anyevent::socket and anyevent::handle.
        - allow more options in on_error.

4.11 Fri May 30 23:42:25 CEST 2008
        - INCOMPATIBLE CHANGE: replace ptr by real PTR lookup, provide
          reverse_lookup and reverse_verify to replace it, support
          v4mapped and v4compat addresses.
        - provide more documentation for the resolver class.
        - really replace longest run of :0: by :: in format_address,
          also properly convert :: and ::1 again.
        - support NAPTR record name and decode it.
        - implement random weight sampling for SRV records, as per
          rfc 2782.
        - correctly abort on srv-record targets of ".".
        - added AnyEvent::DNS::wait_for_slot.
        - in the unlikely event of a virtual circuit connection
          being invalidated by a delayed udp reply, AnyEvent::DNS
          could die. this has been fixed.
        - plug a probable memleak in the DNS vc code.
        - use configured timeout also for VC request phase.
        - implement timeout and max_outstanding methods
          for resolver class.
        - update version numbers in all modules.

4.1  Thu May 29 05:45:40 CEST 2008
        - INCOMPATIBLE CHANGE: renamed xxx_ip functions to xxx_address
          which mirrors their purpose better (old names still available
          for a while). Also moved AnyEvent::DNS::addr to
          AnyEvent::Socket::resolve_sockaddr.
        - implement AnyEvent->time and AnyEvent->now.
        - fix IPv6 support in pack_sockaddr.
        - officially un-experimentalise all newly introduced code.
        - support unix domain sockets everywhere by specifying
          a host of "unix/" and the pathname as service.
        - implement an activity timeout in AnyEvent::Handle.
        - added a regex read type to AnyEvent::Handle.
        - added a json read/write type to AnyEvent::Handle.
        - always croak in on_error in AnyEvent::Handle.
        - document how to subclass AnyEvent::Handle.
        - implement AnyEvent::Util::fork_call.
        - add support for IPv6 nameservers and nameserver statements.
        - work around _yet_ _another_ windows perl bug in where empty
          select masks cause errors in the pure perl backend (this
          workaround cannot be implemented for the other event loops,
          but EV also works around this).
        - supply AnyEvent::Socket::address_type and make good use of it.
        - clarify and fix the Handle documentation w.r.t $self vs. $handle
          vs. callback arguments.
        - add some recommends to the META.yml.

4.05 Mon May 26 19:44:06 CEST 2008
        - some platforms ignore the rfc and prepend an extra sa_len member to
          the sockaddr structure, cater for those. also use sockaddr_family,
          didn't know it was there, but comes in handy for the workaround.
        - undo the import WIN32 hack.

4.04 Mon May 26 08:03:31 CEST 2008
        - try to work around yet another windows bug: failed connects are reported
          as if it were out-of-band data. windows users: you suck. Only
          EV, Glib, Event and the pure perl backend can handle this condition.
        - optimize write algorithm in AnyEvent::Handle.
        - properly parse PERL_ANYEVENT_PROTOCOLS and use the info correctly.
        - tcp_connect now properly iterates through all targets.
        - check wether IPv6 sockets can actually be created, otherwise, disable ipv6
          support entirely. also hardcode some AF_INET6 constants for the
          sake of perl 5.8.
        - vastly improved nameserver/suffix detection algorithm for windows
          (still a hack...)
        - try to use a fallback dns server if no dns servers could be found.
        - splatter around some local $SIG{__DIE__}'s to work around bad
          die handlers.

4.03 Sun May 25 05:05:57 CEST 2008
        - work around perl bugs on windows, where perl returns undocumented
          error codes for sysread, syswrite etc.
        - fix AnyEvent::Handle::unshift_read to really unshift and not push.
        - AnyEvent::Handle could sometimes stumble over 0-byte writes.
        - fix unpack_sockaddr, now works for AF_INET6 sockaddr's.
        - updated documentation.
        - lots of workarounds for perl 5.8 quirks.
        - implement a more flexible type system for both reads and writes
          in AnyEvent::Handle.
        - support IPv6 in tcp_server.
        - pass local hostname and port to the prepare callback in tcp_server.
        - make types extendable in AnyEvent::Handle.
        - croak, not die, in AnyEvent::Handle;

4.0  Sat May 24 19:58:08 CEST 2008
        - added (experimental) AnyEvent::DNS module.
        - added (experimental) AnyEvent::Socket module.
        - added (experiemntal) support for TLS/SSL in AnyEvent::Handle.
        - make condvar->end call ->send as documented.
        - make condvar constructor support the documented cb => argument.
        - overload condvars so you can use them instead of code references.
        - support more of the POSIX forms instead of a pure dotted quad for
          verbatim ip addresses.
        - AnyEvent::Socket::inet_aton will use AnyEvent::DNS now and not fork anymore.
        - try very hard not to freeze on broken windows perls.
        - make on_eof optional in AnyEvent::Handle.
        - support service names in tcp_connect and tcp_server.
        - work around netbsd/openbsd bug causing unix sockets not to
          become writable until empty.
        - only make a dummy read for error detection when getpeername
          returns ENOTCONN.
        - defend AnyEvent::Util::inet_aton against Coro::LWP brutal
          override.
        - new AnyEvent::Guard::cancel.

3.5  Sat May 17 23:17:14 CEST 2008
        - gracefully deal with systems not defining CLOCK_MONOTONIC
          (as opposed to not supporting the clock itself, which worked in 3.41).
        - added AnyEvent::Util::tcp_connect and AnyEvent::Util::tcp_server
          helpers, to replace the ill-designed AnyEvent::Socket class.
        - added some examples (eg/connect, eg/handle).
        - added AnyEvent::Util::guard.
        - AnyEvent::Util now exports most of its functions.
        - fixed a bug in *_read_chunk, where the callback was called with $self as
          first and second argument.
        - simplified and fixed regex handling in AnyEvent::Handle::*_read_line.
        - fix manpage condvars examples to use new syntax.
        - considerably improve inet_aton with EV::ADNS backend to support
          cname chains (common dns configuration bug, e.g. with www.google.de)
          and aaaa records if no a record could be found.

3.41 Sun May 11 19:53:13 CEST 2008
        - work around a bug in perl 5.8.8's local. Reported by Yi Ma Mao.

3.4  Sun May 11 00:29:25 CEST 2008
        - complete re-implementation of condvars with a hopefully much mroe useful
          API (backward compatible functions exist but are undocumented).
        - AnyEvent::Handle fully rewritten with a hopefully more powerful API
          (still subject to change).
        - take advantage of CLOCK_MONOTONIC, if available, in AnyEvent::Impl::Perl.
        - provide AnyEvent::post_detect and @AnyEvent::post_detect, which
          allows module authors to avoid forcing event loop detection.
          (used by Coro::AIO, Coro::BDB, Coro::AnyEvent for example).
        - remove coro backends: Coro now provides generic support for AnyEvent
          via Coro::AnyEvent.

3.3  Mon Apr 28 09:51:06 CEST 2008
        - added AnyEvent::Handle, AnyEvent::Socket and AnyEvent::Util modules.
        - fix a bug in the pure perl backend that kept watchers alive
          when multiple watchers were registered for the same fh/poll combo.
        - add a benchmark section showing AnyEvent overhead and comparing
          the different event loops with each other.
        - prefer pure perl over tk when autoprobing, as it's about as fast,
          but doesn't crash with many watchers.
        - declare Qt support non-experimental.
        - clarify the confusing section about the file descriptor being
          kept alive.
        - document the race between loading of an event module and
          child processes exiting.
        - support POE as "backend" (with some caveats, POE is not generic
          enough, and darn slow).
        - support Wx and Prima through POE.
        - optimise perl backend to use 20% less memory and take advantage
          of typical timeout behaviour. It can now compete with
          select/poll-based C event loops in most cases (it is usually
          faster than Event and Glib :).
        - roughly cut EV memory use in half and increase its speed by 30%,
          by removing undocumented functionality. Did something similar
          to other event loops where possible.

3.2  Thu Apr 24 10:10:40 CEST 2008
        - do not die when anyevent watchers are destroyed while running callbacks
          in the pureperl backend (could only happen when two watchers are registered
          for the same fh/poll combo).
        - support autoloading for child watchers, was broken in all versions.
        - implement PERL_ANYEVENT_MODEL env variable.
        - (experimental) implement interface to the (very crashy/buggy) Event::Lib module.
        - (experimental) implement interface to the Qt module (cannot be autoprobed).
        - this release is IO:AnyEvent-proof.

3.12 Tue Apr 22 07:11:46 CEST 2008
        - reinstate AUTHOR section that got lost somehow.
        - do not hang in the testsuite with badly broken perls (activestate,
          strawberry...), but instead diagnose the problem and continue.
        - use INT instead of CHLD in an attempt to support broken windows perls
          better (this decreases the test quality, unfortunately).
        - do not send the signal to the process group
          (no problem for CHLD, bad for INT :).

3.11 Sat Apr 19 06:57:31 CEST 2008
        - major documentation rework.
        - document the fact that child watchers only watch for zombies.
        - fix the child watcher example.

3.1  Wed Apr 16 17:09:01 CEST 2008
        - work around recurring bugs in Tk by dup'ing filehandles, the
          only method with good success chances on Tk (the bugs apparently
          don't get fixed anytime soon).
        - lift the restriction of only one watcher per fh direction
          (as the Tk bug workaround also lifts it and only Tk imposed
          such strong limits).
        - changed probe order to prefer coro adaptors.
        - explain why recursion into the event loop is not supported
          unless the backend supports it (only Coro::EV does without
          any restrictions...).
        - add simple manpages for all backend modules.

3.0  Mon Apr  7 21:30:23 CEST 2008
        - Coro::Signal changed semantics, roll our own, also cleaning
          up the Coro implementation in general.
        - rename Coro backend to CoroEvent.
        - add some decision helping paragraph to the manpage that should
          help people to decide whether AnyEvent is the right thing for them.

2.9  Mon Jan 28 13:31:54 CET 2008
        - update for EV 3.0 API changes.

2.8  Sun Nov 25 15:06:03 CET 2007
        - waitpid can validly return 0. accept this fact of life
          instead of reporting it to any watchers.

2.7  Fri Nov 23 11:41:14 CET 2007
        - force use of AnyEvent::Impl::Perl in testsuite, there is
          too much breakage outside AnyEvent.
        - deliver signals synchronously in AnyEvent::Impl::Perl
          or any other event loop that relies on AnyEvents child
          watcher emulation. *Could* help with hanging testsuite
          (except when Event or EV are installed).

2.6  Fri Nov  9 20:36:35 CET 2007
        - fix bug in testsuite.
        - move EV adaptor modules to AnyEvent.
        - add Coro+EV adaptor module.

2.55 Tue Nov  6 17:41:32 CET 2007
        - add EV to the list of supported event models.
        - do not auto-reset pid watchers, pass pid and status to them.
        - allow a pid of zero to watch for all children in child watchers.

2.54 Wed Jul 18 17:36:23 CEST 2007
        - work around a perl bug that results in
          BEGIN not safe after errors--compilation aborted without
          any discernible reason or error message by once
          again not use'ing strict.

2.53 Sun Jul  8 10:51:53 CEST 2007
        - make Glib interface work again (spotted by elmex).

2.52 Wed Mar  7 18:36:16 CET 2007
        - child watchers stopped working permanently when
          all current child watchers were destroyed.

2.51 Mon Dec 11 21:33:24 CET 2006
        - work around bugs in perl where eval "require Module" returns
          true even if the module couldn't be loaded :/.

2.5  Mon Dec 11 02:15:28 CET 2006
        - avoid $AUTOLOAD because many perls corrupt it.
        - AnyEvent::detect forces autodetection.
        - implement signal watchers (experimental)
          (Tk does not support async signals (<= 804.027 at least),
          so they might get delayed indefinitely on Tk).
        - implement child watchers (experimental).
        - moved default condvar implementation into base module, simplifying
          most implementation modules.

2.1  Fri Nov 24 15:50:48 CET 2006
        - better docs.
        - simple testsuite.
        - added AnyEvent->one_event method for special purposes.

2.0  Wed Nov  1 02:21:30 CET 2006
        - INCOMPATIBLE CHANGE: poll can now either be "r" or "w" but not both.
        - INCOMPATIBLE CHANGE: io watcher callbacks have no arguments anymore.
        - EXPERIMENTAL:
          new pure-perl model added, AnyEvent now always finds a suitable
          event model.
        - improved documentation.
        - reduced cpu overhead.

1.02 Fri Jan 13 14:15:40 CET 2006
        - add COPYING to clarify license.

1.01 Sun Jan  8 05:48:09 CET 2006
        - correctly cancel Event timers, avoid memory leaks.

1.0  Sun Jan  8 05:40:58 CET 2006
        - allow third-party interfaces to be added at runtime.
        - fix version number.

0.9  Fri Dec 30 02:25:41 CET 2005
        - fixed errors in the documentation.
        - going back to using $VERSION as "load check",
          as suggested by Jörn Reder. Let's see why I stopped using
          this method.
        - add 'hup' to the list of events to receive for glib
          and generate 'rw' events for it, as some versions of
          glib seem to require this, while this breaks other
          (older) versions of glib.
        - implemented PERL_ANYEVENT_VERBOSE env variable.

0.3   Sun Dec  4 10:43:33 CET 2005
        - no changes to the code.
        - fixed documentation.
        - clarified some corner cases.
        - vastly improved documentation with a long example.

0.2   Thu Dec  1 22:18:49 CET 2005
        - check whether a valid method was called, to avoid endless loops.
        - move condvars into their own class (cleaner, safer).
        - don't die when some modules are not available.
        - Tk is too broken to allow for words. Will work once Tk works.

0.1   Thu Dec  1 19:44:57 CET 2005
        - spiced up and cleaned up for release.

0.01  Tue Sep 21 18:12:09 CEST 2004
        - original version; copied from Convert::Scalar.

Revision:	1.155
Committed:	Fri Jun 6 11:01:17 2008 UTC (15 years, 11 months ago) by root
Branch:	MAIN
CVS Tags:	rel-4_15
Changes since 1.154:	+3 -1 lines
Log Message:	* empty log message *
#	User	Rev	Content
1	root	1.1	Revision history for Perl extension AnyEvent.
2
3	root	1.155	4.15 Fri Jun 6 13:00:46 CEST 2008
4	root	1.154	- the pure perl backend would keep some watchers alive when more than
5			one watcher was registered for the same fd.
6	root	1.155	- new "packstring" and "storable" read and write types
7			for AnyEvent::Handle.
8	root	1.153	- allow on_eof handler to be called after on_errro with EPIPE returns.
9			- do not immediately call on_read callback in handle constructor.
10
11	root	1.152	4.14 Thu Jun 5 20:29:31 CEST 2008
12	elmex	1.149	- Fixed a bug in DNS SRV priority sorting.
13	root	1.150	- AnyEvent::Util::guard now reports runtime errors while
14			executing the guard block as warnings.
15	root	1.152	- handle 0-byte-reads just before EOF correctly in AnyEvent::Handle.
16	elmex	1.149
17	root	1.148	4.13 Thu Jun 5 00:47:59 CEST 2008
18	root	1.146	- AnyEvent::DNS only followed cname chains with length 2,
19			contrary to documentation. bumped it up to 10, thanks to
20			microsoft, the current broken-dns-config-king.
21	root	1.147	- AnyEvent::DNS didn't check for socket return status
22			but instead relied on perl not creating filehandles in that
23			case - too bad it gives you a bogus file handle (reported
24			and analysed by Vladimir Timofeev).
25	root	1.145	- fix queue management logic in AnyEvent::Handle:
26			when on_read was registered, the queue was empty
27			and no progress could be made AnyEvent::Handle would
28			enter an endless loop.
29			- correctly start reading again when the handle became
30			busy again after idling.
31	root	1.146	- correctly treat tls shut-downs as EOF condition
32			(for the time being, would be nice to have a callback for that).
33	root	1.145	- correctly call eof callback under all conditions
34			(hopefully).
35	root	1.146	- the timeout callback did not expect that $self can go
36			away any time.
37	root	1.145
38	root	1.144	4.12 Tue Jun 3 10:58:04 CEST 2008
39			- include AnyEvent::Intro, a tutorial for anyevent,
40			anyevent::socket and anyevent::handle.
41	root	1.143	- allow more options in on_error.
42	root	1.142
43	root	1.141	4.11 Fri May 30 23:42:25 CEST 2008
44	root	1.135	- INCOMPATIBLE CHANGE: replace ptr by real PTR lookup, provide
45			reverse_lookup and reverse_verify to replace it, support
46			v4mapped and v4compat addresses.
47	root	1.129	- provide more documentation for the resolver class.
48	root	1.130	- really replace longest run of :0: by :: in format_address,
49			also properly convert :: and ::1 again.
50	root	1.134	- support NAPTR record name and decode it.
51	root	1.133	- implement random weight sampling for SRV records, as per
52			rfc 2782.
53	root	1.137	- correctly abort on srv-record targets of ".".
54			- added AnyEvent::DNS::wait_for_slot.
55	root	1.138	- in the unlikely event of a virtual circuit connection
56			being invalidated by a delayed udp reply, AnyEvent::DNS
57			could die. this has been fixed.
58			- plug a probable memleak in the DNS vc code.
59			- use configured timeout also for VC request phase.
60	root	1.139	- implement timeout and max_outstanding methods
61			for resolver class.
62	root	1.140	- update version numbers in all modules.
63	root	1.129
64	root	1.128	4.1 Thu May 29 05:45:40 CEST 2008
65	root	1.123	- INCOMPATIBLE CHANGE: renamed xxx_ip functions to xxx_address
66			which mirrors their purpose better (old names still available
67			for a while). Also moved AnyEvent::DNS::addr to
68			AnyEvent::Socket::resolve_sockaddr.
69	root	1.127	- implement AnyEvent->time and AnyEvent->now.
70	root	1.124	- fix IPv6 support in pack_sockaddr.
71	root	1.123	- officially un-experimentalise all newly introduced code.
72			- support unix domain sockets everywhere by specifying
73			a host of "unix/" and the pathname as service.
74	root	1.126	- implement an activity timeout in AnyEvent::Handle.
75	root	1.122	- added a regex read type to AnyEvent::Handle.
76			- added a json read/write type to AnyEvent::Handle.
77	root	1.118	- always croak in on_error in AnyEvent::Handle.
78			- document how to subclass AnyEvent::Handle.
79	root	1.120	- implement AnyEvent::Util::fork_call.
80	root	1.127	- add support for IPv6 nameservers and nameserver statements.
81	root	1.121	- work around _yet_ _another_ windows perl bug in where empty
82			select masks cause errors in the pure perl backend (this
83			workaround cannot be implemented for the other event loops,
84			but EV also works around this).
85	root	1.123	- supply AnyEvent::Socket::address_type and make good use of it.
86	root	1.122	- clarify and fix the Handle documentation w.r.t $self vs. $handle
87			vs. callback arguments.
88	root	1.127	- add some recommends to the META.yml.
89	root	1.117
90	root	1.116	4.05 Mon May 26 19:44:06 CEST 2008
91			- some platforms ignore the rfc and prepend an extra sa_len member to
92			the sockaddr structure, cater for those. also use sockaddr_family,
93			didn't know it was there, but comes in handy for the workaround.
94	root	1.114	- undo the import WIN32 hack.
95
96	root	1.113	4.04 Mon May 26 08:03:31 CEST 2008
97	root	1.109	- try to work around yet another windows bug: failed connects are reported
98	root	1.110	as if it were out-of-band data. windows users: you suck. Only
99			EV, Glib, Event and the pure perl backend can handle this condition.
100	root	1.111	- optimize write algorithm in AnyEvent::Handle.
101	root	1.106	- properly parse PERL_ANYEVENT_PROTOCOLS and use the info correctly.
102	root	1.112	- tcp_connect now properly iterates through all targets.
103	root	1.104	- check wether IPv6 sockets can actually be created, otherwise, disable ipv6
104	root	1.114	support entirely. also hardcode some AF_INET6 constants for the
105	root	1.107	sake of perl 5.8.
106	root	1.106	- vastly improved nameserver/suffix detection algorithm for windows
107			(still a hack...)
108			- try to use a fallback dns server if no dns servers could be found.
109	root	1.108	- splatter around some local $SIG{__DIE__}'s to work around bad
110			die handlers.
111	root	1.104
112	root	1.102	4.03 Sun May 25 05:05:57 CEST 2008
113	root	1.100	- work around perl bugs on windows, where perl returns undocumented
114			error codes for sysread, syswrite etc.
115	root	1.96	- fix AnyEvent::Handle::unshift_read to really unshift and not push.
116	root	1.97	- AnyEvent::Handle could sometimes stumble over 0-byte writes.
117	root	1.101	- fix unpack_sockaddr, now works for AF_INET6 sockaddr's.
118	root	1.100	- updated documentation.
119	root	1.103	- lots of workarounds for perl 5.8 quirks.
120	root	1.98	- implement a more flexible type system for both reads and writes
121			in AnyEvent::Handle.
122	root	1.101	- support IPv6 in tcp_server.
123			- pass local hostname and port to the prepare callback in tcp_server.
124	root	1.99	- make types extendable in AnyEvent::Handle.
125	root	1.100	- croak, not die, in AnyEvent::Handle;
126	root	1.96
127	root	1.95	4.0 Sat May 24 19:58:08 CEST 2008
128	root	1.88	- added (experimental) AnyEvent::DNS module.
129			- added (experimental) AnyEvent::Socket module.
130	root	1.93	- added (experiemntal) support for TLS/SSL in AnyEvent::Handle.
131	root	1.90	- make condvar->end call ->send as documented.
132			- make condvar constructor support the documented cb => argument.
133	root	1.94	- overload condvars so you can use them instead of code references.
134	root	1.93	- support more of the POSIX forms instead of a pure dotted quad for
135	root	1.89	verbatim ip addresses.
136	root	1.88	- AnyEvent::Socket::inet_aton will use AnyEvent::DNS now and not fork anymore.
137	root	1.87	- try very hard not to freeze on broken windows perls.
138	root	1.86	- make on_eof optional in AnyEvent::Handle.
139	root	1.83	- support service names in tcp_connect and tcp_server.
140	root	1.84	- work around netbsd/openbsd bug causing unix sockets not to
141	root	1.121	become writable until empty.
142	root	1.81	- only make a dummy read for error detection when getpeername
143			returns ENOTCONN.
144	root	1.82	- defend AnyEvent::Util::inet_aton against Coro::LWP brutal
145			override.
146	root	1.91	- new AnyEvent::Guard::cancel.
147	root	1.81
148	root	1.80	3.5 Sat May 17 23:17:14 CEST 2008
149	root	1.79	- gracefully deal with systems not defining CLOCK_MONOTONIC
150			(as opposed to not supporting the clock itself, which worked in 3.41).
151	root	1.77	- added AnyEvent::Util::tcp_connect and AnyEvent::Util::tcp_server
152			helpers, to replace the ill-designed AnyEvent::Socket class.
153			- added some examples (eg/connect, eg/handle).
154			- added AnyEvent::Util::guard.
155			- AnyEvent::Util now exports most of its functions.
156	elmex	1.74	- fixed a bug in *_read_chunk, where the callback was called with $self as
157			first and second argument.
158	root	1.77	- simplified and fixed regex handling in AnyEvent::Handle::*_read_line.
159	root	1.72	- fix manpage condvars examples to use new syntax.
160	root	1.78	- considerably improve inet_aton with EV::ADNS backend to support
161			cname chains (common dns configuration bug, e.g. with www.google.de)
162			and aaaa records if no a record could be found.
163	root	1.72
164	root	1.71	3.41 Sun May 11 19:53:13 CEST 2008
165			- work around a bug in perl 5.8.8's local. Reported by Yi Ma Mao.
166
167	root	1.70	3.4 Sun May 11 00:29:25 CEST 2008
168			- complete re-implementation of condvars with a hopefully much mroe useful
169			API (backward compatible functions exist but are undocumented).
170	root	1.69	- AnyEvent::Handle fully rewritten with a hopefully more powerful API
171			(still subject to change).
172	root	1.63	- take advantage of CLOCK_MONOTONIC, if available, in AnyEvent::Impl::Perl.
173	root	1.68	- provide AnyEvent::post_detect and @AnyEvent::post_detect, which
174	root	1.67	allows module authors to avoid forcing event loop detection.
175			(used by Coro::AIO, Coro::BDB, Coro::AnyEvent for example).
176	root	1.66	- remove coro backends: Coro now provides generic support for AnyEvent
177			via Coro::AnyEvent.
178	root	1.63
179	root	1.62	3.3 Mon Apr 28 09:51:06 CEST 2008
180			- added AnyEvent::Handle, AnyEvent::Socket and AnyEvent::Util modules.
181	root	1.55	- fix a bug in the pure perl backend that kept watchers alive
182			when multiple watchers were registered for the same fh/poll combo.
183	root	1.54	- add a benchmark section showing AnyEvent overhead and comparing
184			the different event loops with each other.
185	root	1.56	- prefer pure perl over tk when autoprobing, as it's about as fast,
186			but doesn't crash with many watchers.
187	root	1.62	- declare Qt support non-experimental.
188	root	1.56	- clarify the confusing section about the file descriptor being
189			kept alive.
190			- document the race between loading of an event module and
191			child processes exiting.
192	root	1.53	- support POE as "backend" (with some caveats, POE is not generic
193	root	1.54	enough, and darn slow).
194	root	1.53	- support Wx and Prima through POE.
195	root	1.60	- optimise perl backend to use 20% less memory and take advantage
196	root	1.62	of typical timeout behaviour. It can now compete with
197	root	1.60	select/poll-based C event loops in most cases (it is usually
198			faster than Event and Glib :).
199	root	1.59	- roughly cut EV memory use in half and increase its speed by 30%,
200	root	1.62	by removing undocumented functionality. Did something similar
201			to other event loops where possible.
202	root	1.53
203	root	1.50	3.2 Thu Apr 24 10:10:40 CEST 2008
204	root	1.51	- do not die when anyevent watchers are destroyed while running callbacks
205			in the pureperl backend (could only happen when two watchers are registered
206			for the same fh/poll combo).
207			- support autoloading for child watchers, was broken in all versions.
208	root	1.47	- implement PERL_ANYEVENT_MODEL env variable.
209	root	1.49	- (experimental) implement interface to the (very crashy/buggy) Event::Lib module.
210			- (experimental) implement interface to the Qt module (cannot be autoprobed).
211	root	1.52	- this release is IO:AnyEvent-proof.
212	root	1.47
213	root	1.46	3.12 Tue Apr 22 07:11:46 CEST 2008
214			- reinstate AUTHOR section that got lost somehow.
215			- do not hang in the testsuite with badly broken perls (activestate,
216			strawberry...), but instead diagnose the problem and continue.
217			- use INT instead of CHLD in an attempt to support broken windows perls
218			better (this decreases the test quality, unfortunately).
219			- do not send the signal to the process group
220			(no problem for CHLD, bad for INT :).
221
222	root	1.45	3.11 Sat Apr 19 06:57:31 CEST 2008
223			- major documentation rework.
224			- document the fact that child watchers only watch for zombies.
225			- fix the child watcher example.
226
227	root	1.43	3.1 Wed Apr 16 17:09:01 CEST 2008
228	root	1.40	- work around recurring bugs in Tk by dup'ing filehandles, the
229	root	1.43	only method with good success chances on Tk (the bugs apparently
230			don't get fixed anytime soon).
231	root	1.42	- lift the restriction of only one watcher per fh direction
232			(as the Tk bug workaround also lifts it and only Tk imposed
233			such strong limits).
234	root	1.41	- changed probe order to prefer coro adaptors.
235			- explain why recursion into the event loop is not supported
236			unless the backend supports it (only Coro::EV does without
237			any restrictions...).
238			- add simple manpages for all backend modules.
239	root	1.40
240	root	1.39	3.0 Mon Apr 7 21:30:23 CEST 2008
241	root	1.38	- Coro::Signal changed semantics, roll our own, also cleaning
242			up the Coro implementation in general.
243			- rename Coro backend to CoroEvent.
244			- add some decision helping paragraph to the manpage that should
245	root	1.44	help people to decide whether AnyEvent is the right thing for them.
246	root	1.38
247	root	1.37	2.9 Mon Jan 28 13:31:54 CET 2008
248			- update for EV 3.0 API changes.
249
250	root	1.36	2.8 Sun Nov 25 15:06:03 CET 2007
251			- waitpid can validly return 0. accept this fact of life
252			instead of reporting it to any watchers.
253
254	root	1.35	2.7 Fri Nov 23 11:41:14 CET 2007
255	root	1.34	- force use of AnyEvent::Impl::Perl in testsuite, there is
256			too much breakage outside AnyEvent.
257	root	1.35	- deliver signals synchronously in AnyEvent::Impl::Perl
258			or any other event loop that relies on AnyEvents child
259			watcher emulation. Could help with hanging testsuite
260			(except when Event or EV are installed).
261	root	1.34
262	root	1.33	2.6 Fri Nov 9 20:36:35 CET 2007
263	root	1.32	- fix bug in testsuite.
264			- move EV adaptor modules to AnyEvent.
265			- add Coro+EV adaptor module.
266	root	1.26
267	root	1.31	2.55 Tue Nov 6 17:41:32 CET 2007
268	root	1.27	- add EV to the list of supported event models.
269	root	1.30	- do not auto-reset pid watchers, pass pid and status to them.
270	root	1.29	- allow a pid of zero to watch for all children in child watchers.
271	root	1.27
272	root	1.25	2.54 Wed Jul 18 17:36:23 CEST 2007
273			- work around a perl bug that results in
274			BEGIN not safe after errors--compilation aborted without
275			any discernible reason or error message by once
276			again not use'ing strict.
277
278	root	1.24	2.53 Sun Jul 8 10:51:53 CEST 2007
279			- make Glib interface work again (spotted by elmex).
280
281	root	1.22	2.52 Wed Mar 7 18:36:16 CET 2007
282			- child watchers stopped working permanently when
283	root	1.23	all current child watchers were destroyed.
284	root	1.22
285	root	1.21	2.51 Mon Dec 11 21:33:24 CET 2006
286			- work around bugs in perl where eval "require Module" returns
287			true even if the module couldn't be loaded :/.
288
289	root	1.20	2.5 Mon Dec 11 02:15:28 CET 2006
290	root	1.19	- avoid $AUTOLOAD because many perls corrupt it.
291	root	1.20	- AnyEvent::detect forces autodetection.
292			- implement signal watchers (experimental)
293			(Tk does not support async signals (<= 804.027 at least),
294			so they might get delayed indefinitely on Tk).
295			- implement child watchers (experimental).
296			- moved default condvar implementation into base module, simplifying
297			most implementation modules.
298	root	1.14
299	root	1.18	2.1 Fri Nov 24 15:50:48 CET 2006
300	root	1.16	- better docs.
301			- simple testsuite.
302	root	1.17	- added AnyEvent->one_event method for special purposes.
303	root	1.16
304	root	1.15	2.0 Wed Nov 1 02:21:30 CET 2006
305	root	1.13	- INCOMPATIBLE CHANGE: poll can now either be "r" or "w" but not both.
306			- INCOMPATIBLE CHANGE: io watcher callbacks have no arguments anymore.
307			- EXPERIMENTAL:
308			new pure-perl model added, AnyEvent now always finds a suitable
309			event model.
310	root	1.12	- improved documentation.
311			- reduced cpu overhead.
312
313	root	1.11	1.02 Fri Jan 13 14:15:40 CET 2006
314			- add COPYING to clarify license.
315
316	root	1.10	1.01 Sun Jan 8 05:48:09 CET 2006
317			- correctly cancel Event timers, avoid memory leaks.
318
319	root	1.9	1.0 Sun Jan 8 05:40:58 CET 2006
320	root	1.8	- allow third-party interfaces to be added at runtime.
321			- fix version number.
322
323	root	1.7	0.9 Fri Dec 30 02:25:41 CET 2005
324	root	1.6	- fixed errors in the documentation.
325	root	1.7	- going back to using $VERSION as "load check",
326			as suggested by Jörn Reder. Let's see why I stopped using
327			this method.
328			- add 'hup' to the list of events to receive for glib
329			and generate 'rw' events for it, as some versions of
330			glib seem to require this, while this breaks other
331			(older) versions of glib.
332			- implemented PERL_ANYEVENT_VERBOSE env variable.
333	root	1.6
334	root	1.5	0.3 Sun Dec 4 10:43:33 CET 2005
335			- no changes to the code.
336			- fixed documentation.
337			- clarified some corner cases.
338			- vastly improved documentation with a long example.
339
340	root	1.3	0.2 Thu Dec 1 22:18:49 CET 2005
341	root	1.44	- check whether a valid method was called, to avoid endless loops.
342	root	1.4	- move condvars into their own class (cleaner, safer).
343			- don't die when some modules are not available.
344			- Tk is too broken to allow for words. Will work once Tk works.
345	root	1.3
346	root	1.2	0.1 Thu Dec 1 19:44:57 CET 2005
347			- spiced up and cleaned up for release.
348
349	root	1.1	0.01 Tue Sep 21 18:12:09 CEST 2004
350			- original version; copied from Convert::Scalar.
351