[ViewVC] Annotation of: cvs/AnyEvent/Changes

Revision history for Perl extension AnyEvent.

4.160
        - new AnyEvent::Handle options: autocork and no_delay.

4.152 Sun Jun 22 14:15:44 CEST 2008
        - allow for 32-bit perls that implement shifts differently
          on different architectures in parse_ipv4 (reported and
          analysed by Keiichi DAIBA).

4.151 Fri Jun  6 17:34:24 CEST 2008
        - make sure specifying _only_ on_read and never pushing reads
          works.

4.15 Fri Jun  6 13:00:46 CEST 2008
        - the pure perl backend would keep some watchers alive when more than
          one watcher was registered for the same fd.
        - new "packstring" and "storable" read and write types
          for AnyEvent::Handle.
        - allow on_eof handler to be called after on_error with EPIPE returns.
        - do not immediately call on_read callback in handle constructor.

4.14 Thu Jun  5 20:29:31 CEST 2008
        - Fixed a bug in DNS SRV priority sorting.
        - AnyEvent::Util::guard now reports runtime errors while
          executing the guard block as warnings.
        - handle 0-byte-reads just before EOF correctly in AnyEvent::Handle.

4.13 Thu Jun  5 00:47:59 CEST 2008
        - AnyEvent::DNS only followed cname chains with length 2,
          contrary to documentation. bumped it up to 10, thanks to
          microsoft, the current broken-dns-config-king.
        - AnyEvent::DNS didn't check for socket return status
          but instead relied on perl not creating filehandles in that
          case - too bad it gives you a bogus file handle (reported
          and analysed by Vladimir Timofeev).
        - fix queue management logic in AnyEvent::Handle:
          when on_read was registered, the queue was empty
          and no progress could be made AnyEvent::Handle would
          enter an endless loop.
        - correctly start reading again when the handle became
          busy again after idling.
        - correctly treat tls shut-downs as EOF condition
          (for the time being, would be nice to have a callback for that).
        - correctly call eof callback under all conditions
          (hopefully).
        - the timeout callback did not expect that $self can go
          away any time.

4.12 Tue Jun  3 10:58:04 CEST 2008
        - include AnyEvent::Intro, a tutorial for anyevent,
          anyevent::socket and anyevent::handle.
        - allow more options in on_error.

4.11 Fri May 30 23:42:25 CEST 2008
        - INCOMPATIBLE CHANGE: replace ptr by real PTR lookup, provide
          reverse_lookup and reverse_verify to replace it, support
          v4mapped and v4compat addresses.
        - provide more documentation for the resolver class.
        - really replace longest run of :0: by :: in format_address,
          also properly convert :: and ::1 again.
        - support NAPTR record name and decode it.
        - implement random weight sampling for SRV records, as per
          rfc 2782.
        - correctly abort on srv-record targets of ".".
        - added AnyEvent::DNS::wait_for_slot.
        - in the unlikely event of a virtual circuit connection
          being invalidated by a delayed udp reply, AnyEvent::DNS
          could die. this has been fixed.
        - plug a probable memleak in the DNS vc code.
        - use configured timeout also for VC request phase.
        - implement timeout and max_outstanding methods
          for resolver class.
        - update version numbers in all modules.

4.1  Thu May 29 05:45:40 CEST 2008
        - INCOMPATIBLE CHANGE: renamed xxx_ip functions to xxx_address
          which mirrors their purpose better (old names still available
          for a while). Also moved AnyEvent::DNS::addr to
          AnyEvent::Socket::resolve_sockaddr.
        - implement AnyEvent->time and AnyEvent->now.
        - fix IPv6 support in pack_sockaddr.
        - officially un-experimentalise all newly introduced code.
        - support unix domain sockets everywhere by specifying
          a host of "unix/" and the pathname as service.
        - implement an activity timeout in AnyEvent::Handle.
        - added a regex read type to AnyEvent::Handle.
        - added a json read/write type to AnyEvent::Handle.
        - always croak in on_error in AnyEvent::Handle.
        - document how to subclass AnyEvent::Handle.
        - implement AnyEvent::Util::fork_call.
        - add support for IPv6 nameservers and nameserver statements.
        - work around _yet_ _another_ windows perl bug in where empty
          select masks cause errors in the pure perl backend (this
          workaround cannot be implemented for the other event loops,
          but EV also works around this).
        - supply AnyEvent::Socket::address_type and make good use of it.
        - clarify and fix the Handle documentation w.r.t $self vs. $handle
          vs. callback arguments.
        - add some recommends to the META.yml.

4.05 Mon May 26 19:44:06 CEST 2008
        - some platforms ignore the rfc and prepend an extra sa_len member to
          the sockaddr structure, cater for those. also use sockaddr_family,
          didn't know it was there, but comes in handy for the workaround.
        - undo the import WIN32 hack.

4.04 Mon May 26 08:03:31 CEST 2008
        - try to work around yet another windows bug: failed connects are reported
          as if it were out-of-band data. windows users: you suck. Only
          EV, Glib, Event and the pure perl backend can handle this condition.
        - optimize write algorithm in AnyEvent::Handle.
        - properly parse PERL_ANYEVENT_PROTOCOLS and use the info correctly.
        - tcp_connect now properly iterates through all targets.
        - check wether IPv6 sockets can actually be created, otherwise, disable ipv6
          support entirely. also hardcode some AF_INET6 constants for the
          sake of perl 5.8.
        - vastly improved nameserver/suffix detection algorithm for windows
          (still a hack...)
        - try to use a fallback dns server if no dns servers could be found.
        - splatter around some local $SIG{__DIE__}'s to work around bad
          die handlers.

4.03 Sun May 25 05:05:57 CEST 2008
        - work around perl bugs on windows, where perl returns undocumented
          error codes for sysread, syswrite etc.
        - fix AnyEvent::Handle::unshift_read to really unshift and not push.
        - AnyEvent::Handle could sometimes stumble over 0-byte writes.
        - fix unpack_sockaddr, now works for AF_INET6 sockaddr's.
        - updated documentation.
        - lots of workarounds for perl 5.8 quirks.
        - implement a more flexible type system for both reads and writes
          in AnyEvent::Handle.
        - support IPv6 in tcp_server.
        - pass local hostname and port to the prepare callback in tcp_server.
        - make types extendable in AnyEvent::Handle.
        - croak, not die, in AnyEvent::Handle;

4.0  Sat May 24 19:58:08 CEST 2008
        - added (experimental) AnyEvent::DNS module.
        - added (experimental) AnyEvent::Socket module.
        - added (experiemntal) support for TLS/SSL in AnyEvent::Handle.
        - make condvar->end call ->send as documented.
        - make condvar constructor support the documented cb => argument.
        - overload condvars so you can use them instead of code references.
        - support more of the POSIX forms instead of a pure dotted quad for
          verbatim ip addresses.
        - AnyEvent::Socket::inet_aton will use AnyEvent::DNS now and not fork anymore.
        - try very hard not to freeze on broken windows perls.
        - make on_eof optional in AnyEvent::Handle.
        - support service names in tcp_connect and tcp_server.
        - work around netbsd/openbsd bug causing unix sockets not to
          become writable until empty.
        - only make a dummy read for error detection when getpeername
          returns ENOTCONN.
        - defend AnyEvent::Util::inet_aton against Coro::LWP brutal
          override.
        - new AnyEvent::Guard::cancel.

3.5  Sat May 17 23:17:14 CEST 2008
        - gracefully deal with systems not defining CLOCK_MONOTONIC
          (as opposed to not supporting the clock itself, which worked in 3.41).
        - added AnyEvent::Util::tcp_connect and AnyEvent::Util::tcp_server
          helpers, to replace the ill-designed AnyEvent::Socket class.
        - added some examples (eg/connect, eg/handle).
        - added AnyEvent::Util::guard.
        - AnyEvent::Util now exports most of its functions.
        - fixed a bug in *_read_chunk, where the callback was called with $self as
          first and second argument.
        - simplified and fixed regex handling in AnyEvent::Handle::*_read_line.
        - fix manpage condvars examples to use new syntax.
        - considerably improve inet_aton with EV::ADNS backend to support
          cname chains (common dns configuration bug, e.g. with www.google.de)
          and aaaa records if no a record could be found.

3.41 Sun May 11 19:53:13 CEST 2008
        - work around a bug in perl 5.8.8's local. Reported by Yi Ma Mao.

3.4  Sun May 11 00:29:25 CEST 2008
        - complete re-implementation of condvars with a hopefully much mroe useful
          API (backward compatible functions exist but are undocumented).
        - AnyEvent::Handle fully rewritten with a hopefully more powerful API
          (still subject to change).
        - take advantage of CLOCK_MONOTONIC, if available, in AnyEvent::Impl::Perl.
        - provide AnyEvent::post_detect and @AnyEvent::post_detect, which
          allows module authors to avoid forcing event loop detection.
          (used by Coro::AIO, Coro::BDB, Coro::AnyEvent for example).
        - remove coro backends: Coro now provides generic support for AnyEvent
          via Coro::AnyEvent.

3.3  Mon Apr 28 09:51:06 CEST 2008
        - added AnyEvent::Handle, AnyEvent::Socket and AnyEvent::Util modules.
        - fix a bug in the pure perl backend that kept watchers alive
          when multiple watchers were registered for the same fh/poll combo.
        - add a benchmark section showing AnyEvent overhead and comparing
          the different event loops with each other.
        - prefer pure perl over tk when autoprobing, as it's about as fast,
          but doesn't crash with many watchers.
        - declare Qt support non-experimental.
        - clarify the confusing section about the file descriptor being
          kept alive.
        - document the race between loading of an event module and
          child processes exiting.
        - support POE as "backend" (with some caveats, POE is not generic
          enough, and darn slow).
        - support Wx and Prima through POE.
        - optimise perl backend to use 20% less memory and take advantage
          of typical timeout behaviour. It can now compete with
          select/poll-based C event loops in most cases (it is usually
          faster than Event and Glib :).
        - roughly cut EV memory use in half and increase its speed by 30%,
          by removing undocumented functionality. Did something similar
          to other event loops where possible.

3.2  Thu Apr 24 10:10:40 CEST 2008
        - do not die when anyevent watchers are destroyed while running callbacks
          in the pureperl backend (could only happen when two watchers are registered
          for the same fh/poll combo).
        - support autoloading for child watchers, was broken in all versions.
        - implement PERL_ANYEVENT_MODEL env variable.
        - (experimental) implement interface to the (very crashy/buggy) Event::Lib module.
        - (experimental) implement interface to the Qt module (cannot be autoprobed).
        - this release is IO:AnyEvent-proof.

3.12 Tue Apr 22 07:11:46 CEST 2008
        - reinstate AUTHOR section that got lost somehow.
        - do not hang in the testsuite with badly broken perls (activestate,
          strawberry...), but instead diagnose the problem and continue.
        - use INT instead of CHLD in an attempt to support broken windows perls
          better (this decreases the test quality, unfortunately).
        - do not send the signal to the process group
          (no problem for CHLD, bad for INT :).

3.11 Sat Apr 19 06:57:31 CEST 2008
        - major documentation rework.
        - document the fact that child watchers only watch for zombies.
        - fix the child watcher example.

3.1  Wed Apr 16 17:09:01 CEST 2008
        - work around recurring bugs in Tk by dup'ing filehandles, the
          only method with good success chances on Tk (the bugs apparently
          don't get fixed anytime soon).
        - lift the restriction of only one watcher per fh direction
          (as the Tk bug workaround also lifts it and only Tk imposed
          such strong limits).
        - changed probe order to prefer coro adaptors.
        - explain why recursion into the event loop is not supported
          unless the backend supports it (only Coro::EV does without
          any restrictions...).
        - add simple manpages for all backend modules.

3.0  Mon Apr  7 21:30:23 CEST 2008
        - Coro::Signal changed semantics, roll our own, also cleaning
          up the Coro implementation in general.
        - rename Coro backend to CoroEvent.
        - add some decision helping paragraph to the manpage that should
          help people to decide whether AnyEvent is the right thing for them.

2.9  Mon Jan 28 13:31:54 CET 2008
        - update for EV 3.0 API changes.

2.8  Sun Nov 25 15:06:03 CET 2007
        - waitpid can validly return 0. accept this fact of life
          instead of reporting it to any watchers.

2.7  Fri Nov 23 11:41:14 CET 2007
        - force use of AnyEvent::Impl::Perl in testsuite, there is
          too much breakage outside AnyEvent.
        - deliver signals synchronously in AnyEvent::Impl::Perl
          or any other event loop that relies on AnyEvents child
          watcher emulation. *Could* help with hanging testsuite
          (except when Event or EV are installed).

2.6  Fri Nov  9 20:36:35 CET 2007
        - fix bug in testsuite.
        - move EV adaptor modules to AnyEvent.
        - add Coro+EV adaptor module.

2.55 Tue Nov  6 17:41:32 CET 2007
        - add EV to the list of supported event models.
        - do not auto-reset pid watchers, pass pid and status to them.
        - allow a pid of zero to watch for all children in child watchers.

2.54 Wed Jul 18 17:36:23 CEST 2007
        - work around a perl bug that results in
          BEGIN not safe after errors--compilation aborted without
          any discernible reason or error message by once
          again not use'ing strict.

2.53 Sun Jul  8 10:51:53 CEST 2007
        - make Glib interface work again (spotted by elmex).

2.52 Wed Mar  7 18:36:16 CET 2007
        - child watchers stopped working permanently when
          all current child watchers were destroyed.

2.51 Mon Dec 11 21:33:24 CET 2006
        - work around bugs in perl where eval "require Module" returns
          true even if the module couldn't be loaded :/.

2.5  Mon Dec 11 02:15:28 CET 2006
        - avoid $AUTOLOAD because many perls corrupt it.
        - AnyEvent::detect forces autodetection.
        - implement signal watchers (experimental)
          (Tk does not support async signals (<= 804.027 at least),
          so they might get delayed indefinitely on Tk).
        - implement child watchers (experimental).
        - moved default condvar implementation into base module, simplifying
          most implementation modules.

2.1  Fri Nov 24 15:50:48 CET 2006
        - better docs.
        - simple testsuite.
        - added AnyEvent->one_event method for special purposes.

2.0  Wed Nov  1 02:21:30 CET 2006
        - INCOMPATIBLE CHANGE: poll can now either be "r" or "w" but not both.
        - INCOMPATIBLE CHANGE: io watcher callbacks have no arguments anymore.
        - EXPERIMENTAL:
          new pure-perl model added, AnyEvent now always finds a suitable
          event model.
        - improved documentation.
        - reduced cpu overhead.

1.02 Fri Jan 13 14:15:40 CET 2006
        - add COPYING to clarify license.

1.01 Sun Jan  8 05:48:09 CET 2006
        - correctly cancel Event timers, avoid memory leaks.

1.0  Sun Jan  8 05:40:58 CET 2006
        - allow third-party interfaces to be added at runtime.
        - fix version number.

0.9  Fri Dec 30 02:25:41 CET 2005
        - fixed errors in the documentation.
        - going back to using $VERSION as "load check",
          as suggested by Jörn Reder. Let's see why I stopped using
          this method.
        - add 'hup' to the list of events to receive for glib
          and generate 'rw' events for it, as some versions of
          glib seem to require this, while this breaks other
          (older) versions of glib.
        - implemented PERL_ANYEVENT_VERBOSE env variable.

0.3   Sun Dec  4 10:43:33 CET 2005
        - no changes to the code.
        - fixed documentation.
        - clarified some corner cases.
        - vastly improved documentation with a long example.

0.2   Thu Dec  1 22:18:49 CET 2005
        - check whether a valid method was called, to avoid endless loops.
        - move condvars into their own class (cleaner, safer).
        - don't die when some modules are not available.
        - Tk is too broken to allow for words. Will work once Tk works.

0.1   Thu Dec  1 19:44:57 CET 2005
        - spiced up and cleaned up for release.

0.01  Tue Sep 21 18:12:09 CEST 2004
        - original version; copied from Convert::Scalar.

Revision:	1.159
Committed:	Wed Jun 25 20:29:32 2008 UTC (15 years, 10 months ago) by root
Branch:	MAIN
Changes since 1.158:	+5 -2 lines
Log Message:	enable autocork and no_delay
#	User	Rev	Content
1	root	1.1	Revision history for Perl extension AnyEvent.
2
3	root	1.159	4.160
4			- new AnyEvent::Handle options: autocork and no_delay.
5
6	root	1.158	4.152 Sun Jun 22 14:15:44 CEST 2008
7	root	1.159	- allow for 32-bit perls that implement shifts differently
8			on different architectures in parse_ipv4 (reported and
9	root	1.158	analysed by Keiichi DAIBA).
10
11	root	1.157	4.151 Fri Jun 6 17:34:24 CEST 2008
12			- make sure specifying _only_ on_read and never pushing reads
13			works.
14
15	root	1.155	4.15 Fri Jun 6 13:00:46 CEST 2008
16	root	1.154	- the pure perl backend would keep some watchers alive when more than
17			one watcher was registered for the same fd.
18	root	1.155	- new "packstring" and "storable" read and write types
19			for AnyEvent::Handle.
20	root	1.156	- allow on_eof handler to be called after on_error with EPIPE returns.
21	root	1.153	- do not immediately call on_read callback in handle constructor.
22
23	root	1.152	4.14 Thu Jun 5 20:29:31 CEST 2008
24	elmex	1.149	- Fixed a bug in DNS SRV priority sorting.
25	root	1.150	- AnyEvent::Util::guard now reports runtime errors while
26			executing the guard block as warnings.
27	root	1.152	- handle 0-byte-reads just before EOF correctly in AnyEvent::Handle.
28	elmex	1.149
29	root	1.148	4.13 Thu Jun 5 00:47:59 CEST 2008
30	root	1.146	- AnyEvent::DNS only followed cname chains with length 2,
31			contrary to documentation. bumped it up to 10, thanks to
32			microsoft, the current broken-dns-config-king.
33	root	1.147	- AnyEvent::DNS didn't check for socket return status
34			but instead relied on perl not creating filehandles in that
35			case - too bad it gives you a bogus file handle (reported
36			and analysed by Vladimir Timofeev).
37	root	1.145	- fix queue management logic in AnyEvent::Handle:
38			when on_read was registered, the queue was empty
39			and no progress could be made AnyEvent::Handle would
40			enter an endless loop.
41			- correctly start reading again when the handle became
42			busy again after idling.
43	root	1.146	- correctly treat tls shut-downs as EOF condition
44			(for the time being, would be nice to have a callback for that).
45	root	1.145	- correctly call eof callback under all conditions
46			(hopefully).
47	root	1.146	- the timeout callback did not expect that $self can go
48			away any time.
49	root	1.145
50	root	1.144	4.12 Tue Jun 3 10:58:04 CEST 2008
51			- include AnyEvent::Intro, a tutorial for anyevent,
52			anyevent::socket and anyevent::handle.
53	root	1.143	- allow more options in on_error.
54	root	1.142
55	root	1.141	4.11 Fri May 30 23:42:25 CEST 2008
56	root	1.135	- INCOMPATIBLE CHANGE: replace ptr by real PTR lookup, provide
57			reverse_lookup and reverse_verify to replace it, support
58			v4mapped and v4compat addresses.
59	root	1.129	- provide more documentation for the resolver class.
60	root	1.130	- really replace longest run of :0: by :: in format_address,
61			also properly convert :: and ::1 again.
62	root	1.134	- support NAPTR record name and decode it.
63	root	1.133	- implement random weight sampling for SRV records, as per
64			rfc 2782.
65	root	1.137	- correctly abort on srv-record targets of ".".
66			- added AnyEvent::DNS::wait_for_slot.
67	root	1.138	- in the unlikely event of a virtual circuit connection
68			being invalidated by a delayed udp reply, AnyEvent::DNS
69			could die. this has been fixed.
70			- plug a probable memleak in the DNS vc code.
71			- use configured timeout also for VC request phase.
72	root	1.139	- implement timeout and max_outstanding methods
73			for resolver class.
74	root	1.140	- update version numbers in all modules.
75	root	1.129
76	root	1.128	4.1 Thu May 29 05:45:40 CEST 2008
77	root	1.123	- INCOMPATIBLE CHANGE: renamed xxx_ip functions to xxx_address
78			which mirrors their purpose better (old names still available
79			for a while). Also moved AnyEvent::DNS::addr to
80			AnyEvent::Socket::resolve_sockaddr.
81	root	1.127	- implement AnyEvent->time and AnyEvent->now.
82	root	1.124	- fix IPv6 support in pack_sockaddr.
83	root	1.123	- officially un-experimentalise all newly introduced code.
84			- support unix domain sockets everywhere by specifying
85			a host of "unix/" and the pathname as service.
86	root	1.126	- implement an activity timeout in AnyEvent::Handle.
87	root	1.122	- added a regex read type to AnyEvent::Handle.
88			- added a json read/write type to AnyEvent::Handle.
89	root	1.118	- always croak in on_error in AnyEvent::Handle.
90			- document how to subclass AnyEvent::Handle.
91	root	1.120	- implement AnyEvent::Util::fork_call.
92	root	1.127	- add support for IPv6 nameservers and nameserver statements.
93	root	1.121	- work around _yet_ _another_ windows perl bug in where empty
94			select masks cause errors in the pure perl backend (this
95			workaround cannot be implemented for the other event loops,
96			but EV also works around this).
97	root	1.123	- supply AnyEvent::Socket::address_type and make good use of it.
98	root	1.122	- clarify and fix the Handle documentation w.r.t $self vs. $handle
99			vs. callback arguments.
100	root	1.127	- add some recommends to the META.yml.
101	root	1.117
102	root	1.116	4.05 Mon May 26 19:44:06 CEST 2008
103			- some platforms ignore the rfc and prepend an extra sa_len member to
104			the sockaddr structure, cater for those. also use sockaddr_family,
105			didn't know it was there, but comes in handy for the workaround.
106	root	1.114	- undo the import WIN32 hack.
107
108	root	1.113	4.04 Mon May 26 08:03:31 CEST 2008
109	root	1.109	- try to work around yet another windows bug: failed connects are reported
110	root	1.110	as if it were out-of-band data. windows users: you suck. Only
111			EV, Glib, Event and the pure perl backend can handle this condition.
112	root	1.111	- optimize write algorithm in AnyEvent::Handle.
113	root	1.106	- properly parse PERL_ANYEVENT_PROTOCOLS and use the info correctly.
114	root	1.112	- tcp_connect now properly iterates through all targets.
115	root	1.104	- check wether IPv6 sockets can actually be created, otherwise, disable ipv6
116	root	1.114	support entirely. also hardcode some AF_INET6 constants for the
117	root	1.107	sake of perl 5.8.
118	root	1.106	- vastly improved nameserver/suffix detection algorithm for windows
119			(still a hack...)
120			- try to use a fallback dns server if no dns servers could be found.
121	root	1.108	- splatter around some local $SIG{__DIE__}'s to work around bad
122			die handlers.
123	root	1.104
124	root	1.102	4.03 Sun May 25 05:05:57 CEST 2008
125	root	1.100	- work around perl bugs on windows, where perl returns undocumented
126			error codes for sysread, syswrite etc.
127	root	1.96	- fix AnyEvent::Handle::unshift_read to really unshift and not push.
128	root	1.97	- AnyEvent::Handle could sometimes stumble over 0-byte writes.
129	root	1.101	- fix unpack_sockaddr, now works for AF_INET6 sockaddr's.
130	root	1.100	- updated documentation.
131	root	1.103	- lots of workarounds for perl 5.8 quirks.
132	root	1.98	- implement a more flexible type system for both reads and writes
133			in AnyEvent::Handle.
134	root	1.101	- support IPv6 in tcp_server.
135			- pass local hostname and port to the prepare callback in tcp_server.
136	root	1.99	- make types extendable in AnyEvent::Handle.
137	root	1.100	- croak, not die, in AnyEvent::Handle;
138	root	1.96
139	root	1.95	4.0 Sat May 24 19:58:08 CEST 2008
140	root	1.88	- added (experimental) AnyEvent::DNS module.
141			- added (experimental) AnyEvent::Socket module.
142	root	1.93	- added (experiemntal) support for TLS/SSL in AnyEvent::Handle.
143	root	1.90	- make condvar->end call ->send as documented.
144			- make condvar constructor support the documented cb => argument.
145	root	1.94	- overload condvars so you can use them instead of code references.
146	root	1.93	- support more of the POSIX forms instead of a pure dotted quad for
147	root	1.89	verbatim ip addresses.
148	root	1.88	- AnyEvent::Socket::inet_aton will use AnyEvent::DNS now and not fork anymore.
149	root	1.87	- try very hard not to freeze on broken windows perls.
150	root	1.86	- make on_eof optional in AnyEvent::Handle.
151	root	1.83	- support service names in tcp_connect and tcp_server.
152	root	1.84	- work around netbsd/openbsd bug causing unix sockets not to
153	root	1.121	become writable until empty.
154	root	1.81	- only make a dummy read for error detection when getpeername
155			returns ENOTCONN.
156	root	1.82	- defend AnyEvent::Util::inet_aton against Coro::LWP brutal
157			override.
158	root	1.91	- new AnyEvent::Guard::cancel.
159	root	1.81
160	root	1.80	3.5 Sat May 17 23:17:14 CEST 2008
161	root	1.79	- gracefully deal with systems not defining CLOCK_MONOTONIC
162			(as opposed to not supporting the clock itself, which worked in 3.41).
163	root	1.77	- added AnyEvent::Util::tcp_connect and AnyEvent::Util::tcp_server
164			helpers, to replace the ill-designed AnyEvent::Socket class.
165			- added some examples (eg/connect, eg/handle).
166			- added AnyEvent::Util::guard.
167			- AnyEvent::Util now exports most of its functions.
168	elmex	1.74	- fixed a bug in *_read_chunk, where the callback was called with $self as
169			first and second argument.
170	root	1.77	- simplified and fixed regex handling in AnyEvent::Handle::*_read_line.
171	root	1.72	- fix manpage condvars examples to use new syntax.
172	root	1.78	- considerably improve inet_aton with EV::ADNS backend to support
173			cname chains (common dns configuration bug, e.g. with www.google.de)
174			and aaaa records if no a record could be found.
175	root	1.72
176	root	1.71	3.41 Sun May 11 19:53:13 CEST 2008
177			- work around a bug in perl 5.8.8's local. Reported by Yi Ma Mao.
178
179	root	1.70	3.4 Sun May 11 00:29:25 CEST 2008
180			- complete re-implementation of condvars with a hopefully much mroe useful
181			API (backward compatible functions exist but are undocumented).
182	root	1.69	- AnyEvent::Handle fully rewritten with a hopefully more powerful API
183			(still subject to change).
184	root	1.63	- take advantage of CLOCK_MONOTONIC, if available, in AnyEvent::Impl::Perl.
185	root	1.68	- provide AnyEvent::post_detect and @AnyEvent::post_detect, which
186	root	1.67	allows module authors to avoid forcing event loop detection.
187			(used by Coro::AIO, Coro::BDB, Coro::AnyEvent for example).
188	root	1.66	- remove coro backends: Coro now provides generic support for AnyEvent
189			via Coro::AnyEvent.
190	root	1.63
191	root	1.62	3.3 Mon Apr 28 09:51:06 CEST 2008
192			- added AnyEvent::Handle, AnyEvent::Socket and AnyEvent::Util modules.
193	root	1.55	- fix a bug in the pure perl backend that kept watchers alive
194			when multiple watchers were registered for the same fh/poll combo.
195	root	1.54	- add a benchmark section showing AnyEvent overhead and comparing
196			the different event loops with each other.
197	root	1.56	- prefer pure perl over tk when autoprobing, as it's about as fast,
198			but doesn't crash with many watchers.
199	root	1.62	- declare Qt support non-experimental.
200	root	1.56	- clarify the confusing section about the file descriptor being
201			kept alive.
202			- document the race between loading of an event module and
203			child processes exiting.
204	root	1.53	- support POE as "backend" (with some caveats, POE is not generic
205	root	1.54	enough, and darn slow).
206	root	1.53	- support Wx and Prima through POE.
207	root	1.60	- optimise perl backend to use 20% less memory and take advantage
208	root	1.62	of typical timeout behaviour. It can now compete with
209	root	1.60	select/poll-based C event loops in most cases (it is usually
210			faster than Event and Glib :).
211	root	1.59	- roughly cut EV memory use in half and increase its speed by 30%,
212	root	1.62	by removing undocumented functionality. Did something similar
213			to other event loops where possible.
214	root	1.53
215	root	1.50	3.2 Thu Apr 24 10:10:40 CEST 2008
216	root	1.51	- do not die when anyevent watchers are destroyed while running callbacks
217			in the pureperl backend (could only happen when two watchers are registered
218			for the same fh/poll combo).
219			- support autoloading for child watchers, was broken in all versions.
220	root	1.47	- implement PERL_ANYEVENT_MODEL env variable.
221	root	1.49	- (experimental) implement interface to the (very crashy/buggy) Event::Lib module.
222			- (experimental) implement interface to the Qt module (cannot be autoprobed).
223	root	1.52	- this release is IO:AnyEvent-proof.
224	root	1.47
225	root	1.46	3.12 Tue Apr 22 07:11:46 CEST 2008
226			- reinstate AUTHOR section that got lost somehow.
227			- do not hang in the testsuite with badly broken perls (activestate,
228			strawberry...), but instead diagnose the problem and continue.
229			- use INT instead of CHLD in an attempt to support broken windows perls
230			better (this decreases the test quality, unfortunately).
231			- do not send the signal to the process group
232			(no problem for CHLD, bad for INT :).
233
234	root	1.45	3.11 Sat Apr 19 06:57:31 CEST 2008
235			- major documentation rework.
236			- document the fact that child watchers only watch for zombies.
237			- fix the child watcher example.
238
239	root	1.43	3.1 Wed Apr 16 17:09:01 CEST 2008
240	root	1.40	- work around recurring bugs in Tk by dup'ing filehandles, the
241	root	1.43	only method with good success chances on Tk (the bugs apparently
242			don't get fixed anytime soon).
243	root	1.42	- lift the restriction of only one watcher per fh direction
244			(as the Tk bug workaround also lifts it and only Tk imposed
245			such strong limits).
246	root	1.41	- changed probe order to prefer coro adaptors.
247			- explain why recursion into the event loop is not supported
248			unless the backend supports it (only Coro::EV does without
249			any restrictions...).
250			- add simple manpages for all backend modules.
251	root	1.40
252	root	1.39	3.0 Mon Apr 7 21:30:23 CEST 2008
253	root	1.38	- Coro::Signal changed semantics, roll our own, also cleaning
254			up the Coro implementation in general.
255			- rename Coro backend to CoroEvent.
256			- add some decision helping paragraph to the manpage that should
257	root	1.44	help people to decide whether AnyEvent is the right thing for them.
258	root	1.38
259	root	1.37	2.9 Mon Jan 28 13:31:54 CET 2008
260			- update for EV 3.0 API changes.
261
262	root	1.36	2.8 Sun Nov 25 15:06:03 CET 2007
263			- waitpid can validly return 0. accept this fact of life
264			instead of reporting it to any watchers.
265
266	root	1.35	2.7 Fri Nov 23 11:41:14 CET 2007
267	root	1.34	- force use of AnyEvent::Impl::Perl in testsuite, there is
268			too much breakage outside AnyEvent.
269	root	1.35	- deliver signals synchronously in AnyEvent::Impl::Perl
270			or any other event loop that relies on AnyEvents child
271			watcher emulation. Could help with hanging testsuite
272			(except when Event or EV are installed).
273	root	1.34
274	root	1.33	2.6 Fri Nov 9 20:36:35 CET 2007
275	root	1.32	- fix bug in testsuite.
276			- move EV adaptor modules to AnyEvent.
277			- add Coro+EV adaptor module.
278	root	1.26
279	root	1.31	2.55 Tue Nov 6 17:41:32 CET 2007
280	root	1.27	- add EV to the list of supported event models.
281	root	1.30	- do not auto-reset pid watchers, pass pid and status to them.
282	root	1.29	- allow a pid of zero to watch for all children in child watchers.
283	root	1.27
284	root	1.25	2.54 Wed Jul 18 17:36:23 CEST 2007
285			- work around a perl bug that results in
286			BEGIN not safe after errors--compilation aborted without
287			any discernible reason or error message by once
288			again not use'ing strict.
289
290	root	1.24	2.53 Sun Jul 8 10:51:53 CEST 2007
291			- make Glib interface work again (spotted by elmex).
292
293	root	1.22	2.52 Wed Mar 7 18:36:16 CET 2007
294			- child watchers stopped working permanently when
295	root	1.23	all current child watchers were destroyed.
296	root	1.22
297	root	1.21	2.51 Mon Dec 11 21:33:24 CET 2006
298			- work around bugs in perl where eval "require Module" returns
299			true even if the module couldn't be loaded :/.
300
301	root	1.20	2.5 Mon Dec 11 02:15:28 CET 2006
302	root	1.19	- avoid $AUTOLOAD because many perls corrupt it.
303	root	1.20	- AnyEvent::detect forces autodetection.
304			- implement signal watchers (experimental)
305			(Tk does not support async signals (<= 804.027 at least),
306			so they might get delayed indefinitely on Tk).
307			- implement child watchers (experimental).
308			- moved default condvar implementation into base module, simplifying
309			most implementation modules.
310	root	1.14
311	root	1.18	2.1 Fri Nov 24 15:50:48 CET 2006
312	root	1.16	- better docs.
313			- simple testsuite.
314	root	1.17	- added AnyEvent->one_event method for special purposes.
315	root	1.16
316	root	1.15	2.0 Wed Nov 1 02:21:30 CET 2006
317	root	1.13	- INCOMPATIBLE CHANGE: poll can now either be "r" or "w" but not both.
318			- INCOMPATIBLE CHANGE: io watcher callbacks have no arguments anymore.
319			- EXPERIMENTAL:
320			new pure-perl model added, AnyEvent now always finds a suitable
321			event model.
322	root	1.12	- improved documentation.
323			- reduced cpu overhead.
324
325	root	1.11	1.02 Fri Jan 13 14:15:40 CET 2006
326			- add COPYING to clarify license.
327
328	root	1.10	1.01 Sun Jan 8 05:48:09 CET 2006
329			- correctly cancel Event timers, avoid memory leaks.
330
331	root	1.9	1.0 Sun Jan 8 05:40:58 CET 2006
332	root	1.8	- allow third-party interfaces to be added at runtime.
333			- fix version number.
334
335	root	1.7	0.9 Fri Dec 30 02:25:41 CET 2005
336	root	1.6	- fixed errors in the documentation.
337	root	1.7	- going back to using $VERSION as "load check",
338			as suggested by Jörn Reder. Let's see why I stopped using
339			this method.
340			- add 'hup' to the list of events to receive for glib
341			and generate 'rw' events for it, as some versions of
342			glib seem to require this, while this breaks other
343			(older) versions of glib.
344			- implemented PERL_ANYEVENT_VERBOSE env variable.
345	root	1.6
346	root	1.5	0.3 Sun Dec 4 10:43:33 CET 2005
347			- no changes to the code.
348			- fixed documentation.
349			- clarified some corner cases.
350			- vastly improved documentation with a long example.
351
352	root	1.3	0.2 Thu Dec 1 22:18:49 CET 2005
353	root	1.44	- check whether a valid method was called, to avoid endless loops.
354	root	1.4	- move condvars into their own class (cleaner, safer).
355			- don't die when some modules are not available.
356			- Tk is too broken to allow for words. Will work once Tk works.
357	root	1.3
358	root	1.2	0.1 Thu Dec 1 19:44:57 CET 2005
359			- spiced up and cleaned up for release.
360
361	root	1.1	0.01 Tue Sep 21 18:12:09 CEST 2004
362			- original version; copied from Convert::Scalar.
363