[ViewVC] Annotation of: cvs/AnyEvent/Changes

Revision history for Perl extension AnyEvent.

        - added AnyEvent::Handle and AnyEvent::Socket modules
        - fix a bug in the pure perl backend that kept watchers alive
          when multiple watchers were registered for the same fh/poll combo.
        - add a benchmark section showing AnyEvent overhead and comparing
          the different event loops with each other.
        - prefer pure perl over tk when autoprobing, as it's about as fast,
          but doesn't crash with many watchers.
        - make Qt support non-experimental.
        - clarify the confusing section about the file descriptor being
          kept alive.
        - document the race between loading of an event module and
          child processes exiting.
        - support POE as "backend" (with some caveats, POE is not generic
          enough, and darn slow).
        - support Wx and Prima through POE.
        - optimise perl backend to use 20% less memory and take advantage
          of typical timeout behaviour.  It can now compete with
          select/poll-based C event loops in most cases (it is usually
          faster than Event and Glib :).
        - roughly cut EV memory use in half and increase its speed by 30%,
          by removing undocumented functionality.

3.2  Thu Apr 24 10:10:40 CEST 2008
        - do not die when anyevent watchers are destroyed while running callbacks
          in the pureperl backend (could only happen when two watchers are registered
          for the same fh/poll combo).
        - support autoloading for child watchers, was broken in all versions.
        - implement PERL_ANYEVENT_MODEL env variable.
        - (experimental) implement interface to the (very crashy/buggy) Event::Lib module.
        - (experimental) implement interface to the Qt module (cannot be autoprobed).
        - this release is IO:AnyEvent-proof.

3.12 Tue Apr 22 07:11:46 CEST 2008
        - reinstate AUTHOR section that got lost somehow.
        - do not hang in the testsuite with badly broken perls (activestate,
          strawberry...), but instead diagnose the problem and continue.
        - use INT instead of CHLD in an attempt to support broken windows perls
          better (this decreases the test quality, unfortunately).
        - do not send the signal to the process group
          (no problem for CHLD, bad for INT :).

3.11 Sat Apr 19 06:57:31 CEST 2008
        - major documentation rework.
        - document the fact that child watchers only watch for zombies.
        - fix the child watcher example.

3.1  Wed Apr 16 17:09:01 CEST 2008
        - work around recurring bugs in Tk by dup'ing filehandles, the
          only method with good success chances on Tk (the bugs apparently
          don't get fixed anytime soon).
        - lift the restriction of only one watcher per fh direction
          (as the Tk bug workaround also lifts it and only Tk imposed
          such strong limits).
        - changed probe order to prefer coro adaptors.
        - explain why recursion into the event loop is not supported
          unless the backend supports it (only Coro::EV does without
          any restrictions...).
        - add simple manpages for all backend modules.

3.0  Mon Apr  7 21:30:23 CEST 2008
        - Coro::Signal changed semantics, roll our own, also cleaning
          up the Coro implementation in general.
        - rename Coro backend to CoroEvent.
        - add some decision helping paragraph to the manpage that should
          help people to decide whether AnyEvent is the right thing for them.

2.9  Mon Jan 28 13:31:54 CET 2008
        - update for EV 3.0 API changes.

2.8  Sun Nov 25 15:06:03 CET 2007
        - waitpid can validly return 0. accept this fact of life
          instead of reporting it to any watchers.

2.7  Fri Nov 23 11:41:14 CET 2007
        - force use of AnyEvent::Impl::Perl in testsuite, there is
          too much breakage outside AnyEvent.
        - deliver signals synchronously in AnyEvent::Impl::Perl
          or any other event loop that relies on AnyEvents child
          watcher emulation. *Could* help with hanging testsuite
          (except when Event or EV are installed).

2.6  Fri Nov  9 20:36:35 CET 2007
        - fix bug in testsuite.
        - move EV adaptor modules to AnyEvent.
        - add Coro+EV adaptor module.

2.55 Tue Nov  6 17:41:32 CET 2007
        - add EV to the list of supported event models.
        - do not auto-reset pid watchers, pass pid and status to them.
        - allow a pid of zero to watch for all children in child watchers.

2.54 Wed Jul 18 17:36:23 CEST 2007
        - work around a perl bug that results in
          BEGIN not safe after errors--compilation aborted without
          any discernible reason or error message by once
          again not use'ing strict.

2.53 Sun Jul  8 10:51:53 CEST 2007
        - make Glib interface work again (spotted by elmex).

2.52 Wed Mar  7 18:36:16 CET 2007
        - child watchers stopped working permanently when
          all current child watchers were destroyed.

2.51 Mon Dec 11 21:33:24 CET 2006
        - work around bugs in perl where eval "require Module" returns
          true even if the module couldn't be loaded :/.

2.5  Mon Dec 11 02:15:28 CET 2006
        - avoid $AUTOLOAD because many perls corrupt it.
        - AnyEvent::detect forces autodetection.
        - implement signal watchers (experimental)
          (Tk does not support async signals (<= 804.027 at least),
          so they might get delayed indefinitely on Tk).
        - implement child watchers (experimental).
        - moved default condvar implementation into base module, simplifying
          most implementation modules.

2.1  Fri Nov 24 15:50:48 CET 2006
        - better docs.
        - simple testsuite.
        - added AnyEvent->one_event method for special purposes.

2.0  Wed Nov  1 02:21:30 CET 2006
        - INCOMPATIBLE CHANGE: poll can now either be "r" or "w" but not both.
        - INCOMPATIBLE CHANGE: io watcher callbacks have no arguments anymore.
        - EXPERIMENTAL:
          new pure-perl model added, AnyEvent now always finds a suitable
          event model.
        - improved documentation.
        - reduced cpu overhead.

1.02 Fri Jan 13 14:15:40 CET 2006
        - add COPYING to clarify license.

1.01 Sun Jan  8 05:48:09 CET 2006
        - correctly cancel Event timers, avoid memory leaks.

1.0  Sun Jan  8 05:40:58 CET 2006
        - allow third-party interfaces to be added at runtime.
        - fix version number.

0.9  Fri Dec 30 02:25:41 CET 2005
        - fixed errors in the documentation.
        - going back to using $VERSION as "load check",
          as suggested by Jörn Reder. Let's see why I stopped using
          this method.
        - add 'hup' to the list of events to receive for glib
          and generate 'rw' events for it, as some versions of
          glib seem to require this, while this breaks other
          (older) versions of glib.
        - implemented PERL_ANYEVENT_VERBOSE env variable.

0.3   Sun Dec  4 10:43:33 CET 2005
        - no changes to the code.
        - fixed documentation.
        - clarified some corner cases.
        - vastly improved documentation with a long example.

0.2   Thu Dec  1 22:18:49 CET 2005
        - check whether a valid method was called, to avoid endless loops.
        - move condvars into their own class (cleaner, safer).
        - don't die when some modules are not available.
        - Tk is too broken to allow for words. Will work once Tk works.

0.1   Thu Dec  1 19:44:57 CET 2005
        - spiced up and cleaned up for release.

0.01  Tue Sep 21 18:12:09 CEST 2004
        - original version; copied from Convert::Scalar.

Revision:	1.61
Committed:	Sun Apr 27 19:15:43 2008 UTC (16 years ago) by elmex
Branch:	MAIN
Changes since 1.60:	+1 -0 lines
Log Message:	updated documentation and changelog and made the http test optional
#	User	Rev	Content
1	root	1.1	Revision history for Perl extension AnyEvent.
2
3	elmex	1.61	- added AnyEvent::Handle and AnyEvent::Socket modules
4	root	1.55	- fix a bug in the pure perl backend that kept watchers alive
5			when multiple watchers were registered for the same fh/poll combo.
6	root	1.54	- add a benchmark section showing AnyEvent overhead and comparing
7			the different event loops with each other.
8	root	1.56	- prefer pure perl over tk when autoprobing, as it's about as fast,
9			but doesn't crash with many watchers.
10			- make Qt support non-experimental.
11			- clarify the confusing section about the file descriptor being
12			kept alive.
13			- document the race between loading of an event module and
14			child processes exiting.
15	root	1.53	- support POE as "backend" (with some caveats, POE is not generic
16	root	1.54	enough, and darn slow).
17	root	1.53	- support Wx and Prima through POE.
18	root	1.60	- optimise perl backend to use 20% less memory and take advantage
19			of typical timeout behaviour. It can now compete with
20			select/poll-based C event loops in most cases (it is usually
21			faster than Event and Glib :).
22	root	1.59	- roughly cut EV memory use in half and increase its speed by 30%,
23	root	1.57	by removing undocumented functionality.
24	root	1.53
25	root	1.50	3.2 Thu Apr 24 10:10:40 CEST 2008
26	root	1.51	- do not die when anyevent watchers are destroyed while running callbacks
27			in the pureperl backend (could only happen when two watchers are registered
28			for the same fh/poll combo).
29			- support autoloading for child watchers, was broken in all versions.
30	root	1.47	- implement PERL_ANYEVENT_MODEL env variable.
31	root	1.49	- (experimental) implement interface to the (very crashy/buggy) Event::Lib module.
32			- (experimental) implement interface to the Qt module (cannot be autoprobed).
33	root	1.52	- this release is IO:AnyEvent-proof.
34	root	1.47
35	root	1.46	3.12 Tue Apr 22 07:11:46 CEST 2008
36			- reinstate AUTHOR section that got lost somehow.
37			- do not hang in the testsuite with badly broken perls (activestate,
38			strawberry...), but instead diagnose the problem and continue.
39			- use INT instead of CHLD in an attempt to support broken windows perls
40			better (this decreases the test quality, unfortunately).
41			- do not send the signal to the process group
42			(no problem for CHLD, bad for INT :).
43
44	root	1.45	3.11 Sat Apr 19 06:57:31 CEST 2008
45			- major documentation rework.
46			- document the fact that child watchers only watch for zombies.
47			- fix the child watcher example.
48
49	root	1.43	3.1 Wed Apr 16 17:09:01 CEST 2008
50	root	1.40	- work around recurring bugs in Tk by dup'ing filehandles, the
51	root	1.43	only method with good success chances on Tk (the bugs apparently
52			don't get fixed anytime soon).
53	root	1.42	- lift the restriction of only one watcher per fh direction
54			(as the Tk bug workaround also lifts it and only Tk imposed
55			such strong limits).
56	root	1.41	- changed probe order to prefer coro adaptors.
57			- explain why recursion into the event loop is not supported
58			unless the backend supports it (only Coro::EV does without
59			any restrictions...).
60			- add simple manpages for all backend modules.
61	root	1.40
62	root	1.39	3.0 Mon Apr 7 21:30:23 CEST 2008
63	root	1.38	- Coro::Signal changed semantics, roll our own, also cleaning
64			up the Coro implementation in general.
65			- rename Coro backend to CoroEvent.
66			- add some decision helping paragraph to the manpage that should
67	root	1.44	help people to decide whether AnyEvent is the right thing for them.
68	root	1.38
69	root	1.37	2.9 Mon Jan 28 13:31:54 CET 2008
70			- update for EV 3.0 API changes.
71
72	root	1.36	2.8 Sun Nov 25 15:06:03 CET 2007
73			- waitpid can validly return 0. accept this fact of life
74			instead of reporting it to any watchers.
75
76	root	1.35	2.7 Fri Nov 23 11:41:14 CET 2007
77	root	1.34	- force use of AnyEvent::Impl::Perl in testsuite, there is
78			too much breakage outside AnyEvent.
79	root	1.35	- deliver signals synchronously in AnyEvent::Impl::Perl
80			or any other event loop that relies on AnyEvents child
81			watcher emulation. Could help with hanging testsuite
82			(except when Event or EV are installed).
83	root	1.34
84	root	1.33	2.6 Fri Nov 9 20:36:35 CET 2007
85	root	1.32	- fix bug in testsuite.
86			- move EV adaptor modules to AnyEvent.
87			- add Coro+EV adaptor module.
88	root	1.26
89	root	1.31	2.55 Tue Nov 6 17:41:32 CET 2007
90	root	1.27	- add EV to the list of supported event models.
91	root	1.30	- do not auto-reset pid watchers, pass pid and status to them.
92	root	1.29	- allow a pid of zero to watch for all children in child watchers.
93	root	1.27
94	root	1.25	2.54 Wed Jul 18 17:36:23 CEST 2007
95			- work around a perl bug that results in
96			BEGIN not safe after errors--compilation aborted without
97			any discernible reason or error message by once
98			again not use'ing strict.
99
100	root	1.24	2.53 Sun Jul 8 10:51:53 CEST 2007
101			- make Glib interface work again (spotted by elmex).
102
103	root	1.22	2.52 Wed Mar 7 18:36:16 CET 2007
104			- child watchers stopped working permanently when
105	root	1.23	all current child watchers were destroyed.
106	root	1.22
107	root	1.21	2.51 Mon Dec 11 21:33:24 CET 2006
108			- work around bugs in perl where eval "require Module" returns
109			true even if the module couldn't be loaded :/.
110
111	root	1.20	2.5 Mon Dec 11 02:15:28 CET 2006
112	root	1.19	- avoid $AUTOLOAD because many perls corrupt it.
113	root	1.20	- AnyEvent::detect forces autodetection.
114			- implement signal watchers (experimental)
115			(Tk does not support async signals (<= 804.027 at least),
116			so they might get delayed indefinitely on Tk).
117			- implement child watchers (experimental).
118			- moved default condvar implementation into base module, simplifying
119			most implementation modules.
120	root	1.14
121	root	1.18	2.1 Fri Nov 24 15:50:48 CET 2006
122	root	1.16	- better docs.
123			- simple testsuite.
124	root	1.17	- added AnyEvent->one_event method for special purposes.
125	root	1.16
126	root	1.15	2.0 Wed Nov 1 02:21:30 CET 2006
127	root	1.13	- INCOMPATIBLE CHANGE: poll can now either be "r" or "w" but not both.
128			- INCOMPATIBLE CHANGE: io watcher callbacks have no arguments anymore.
129			- EXPERIMENTAL:
130			new pure-perl model added, AnyEvent now always finds a suitable
131			event model.
132	root	1.12	- improved documentation.
133			- reduced cpu overhead.
134
135	root	1.11	1.02 Fri Jan 13 14:15:40 CET 2006
136			- add COPYING to clarify license.
137
138	root	1.10	1.01 Sun Jan 8 05:48:09 CET 2006
139			- correctly cancel Event timers, avoid memory leaks.
140
141	root	1.9	1.0 Sun Jan 8 05:40:58 CET 2006
142	root	1.8	- allow third-party interfaces to be added at runtime.
143			- fix version number.
144
145	root	1.7	0.9 Fri Dec 30 02:25:41 CET 2005
146	root	1.6	- fixed errors in the documentation.
147	root	1.7	- going back to using $VERSION as "load check",
148			as suggested by Jörn Reder. Let's see why I stopped using
149			this method.
150			- add 'hup' to the list of events to receive for glib
151			and generate 'rw' events for it, as some versions of
152			glib seem to require this, while this breaks other
153			(older) versions of glib.
154			- implemented PERL_ANYEVENT_VERBOSE env variable.
155	root	1.6
156	root	1.5	0.3 Sun Dec 4 10:43:33 CET 2005
157			- no changes to the code.
158			- fixed documentation.
159			- clarified some corner cases.
160			- vastly improved documentation with a long example.
161
162	root	1.3	0.2 Thu Dec 1 22:18:49 CET 2005
163	root	1.44	- check whether a valid method was called, to avoid endless loops.
164	root	1.4	- move condvars into their own class (cleaner, safer).
165			- don't die when some modules are not available.
166			- Tk is too broken to allow for words. Will work once Tk works.
167	root	1.3
168	root	1.2	0.1 Thu Dec 1 19:44:57 CET 2005
169			- spiced up and cleaned up for release.
170
171	root	1.1	0.01 Tue Sep 21 18:12:09 CEST 2004
172			- original version; copied from Convert::Scalar.
173