ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.115 by root, Tue Feb 10 13:58:49 2009 UTC vs.
Revision 1.177 by root, Sun Aug 9 00:24:35 2009 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.331;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
		15	my ($hdl, $fatal, $msg) = @_;
		16	warn "got error $msg\n";
		17	$hdl->destroy;
32	$cv->send;	18	$cv->send;
33	},
34	);	19	);
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	filehandles.
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
58	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
60		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
64	=head1 METHODS	65	=head1 METHODS
65		66
66	=over 4	67	=over 4
67		68
68	=item B<new (%args)>	69	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
69		70
70	The constructor supports these arguments (all as key => value pairs).	71	The constructor supports these arguments (all as C<< key => value >> pairs).
71		72
72	=over 4	73	=over 4
73		74
74	=item fh => $filehandle [MANDATORY]	75	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
75		76
76	The filehandle this L<AnyEvent::Handle> object will operate on.	77	The filehandle this L<AnyEvent::Handle> object will operate on.
77
78	NOTE: The filehandle will be set to non-blocking mode (using	78	NOTE: The filehandle will be set to non-blocking mode (using
79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
80	that mode.	80	that mode.
81		81
		82	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		83
		84	Try to connect to the specified host and service (port), using
		85	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		86	default C<peername>.
		87
		88	You have to specify either this parameter, or C<fh>, above.
		89
		90	It is possible to push requests on the read and write queues, and modify
		91	properties of the stream, even while AnyEvent::Handle is connecting.
		92
		93	When this parameter is specified, then the C<on_prepare>,
		94	C<on_connect_error> and C<on_connect> callbacks will be called under the
		95	appropriate circumstances:
		96
		97	=over 4
		98
		99	=item on_prepare => $cb->($handle)
		100
		101	This (rarely used) callback is called before a new connection is
		102	attempted, but after the file handle has been created. It could be used to
		103	prepare the file handle with parameters required for the actual connect
		104	(as opposed to settings that can be changed when the connection is already
		105	established).
		106
		107	The return value of this callback should be the connect timeout value in
		108	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
		109	timeout is to be used).
		110
		111	=item on_connect => $cb->($handle, $host, $port, $retry->())
		112
		113	This callback is called when a connection has been successfully established.
		114
		115	The actual numeric host and port (the socket peername) are passed as
		116	parameters, together with a retry callback.
		117
		118	When, for some reason, the handle is not acceptable, then calling
		119	C<$retry> will continue with the next conenction target (in case of
		120	multi-homed hosts or SRV records there can be multiple connection
		121	endpoints). When it is called then the read and write queues, eof status,
		122	tls status and similar properties of the handle are being reset.
		123
		124	In most cases, ignoring the C<$retry> parameter is the way to go.
		125
		126	=item on_connect_error => $cb->($handle, $message)
		127
		128	This callback is called when the conenction could not be
		129	established. C<$!> will contain the relevant error code, and C<$message> a
		130	message describing it (usually the same as C<"$!">).
		131
		132	If this callback isn't specified, then C<on_error> will be called with a
		133	fatal error instead.
		134
		135	=back
		136
		137	=item on_error => $cb->($handle, $fatal, $message)
		138
		139	This is the error callback, which is called when, well, some error
		140	occured, such as not being able to resolve the hostname, failure to
		141	connect or a read error.
		142
		143	Some errors are fatal (which is indicated by C<$fatal> being true). On
		144	fatal errors the handle object will be destroyed (by a call to C<< ->
		145	destroy >>) after invoking the error callback (which means you are free to
		146	examine the handle object). Examples of fatal errors are an EOF condition
		147	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		148	cases where the other side can close the connection at their will it is
		149	often easiest to not report C<EPIPE> errors in this callback.
		150
		151	AnyEvent::Handle tries to find an appropriate error code for you to check
		152	against, but in some cases (TLS errors), this does not work well. It is
		153	recommended to always output the C<$message> argument in human-readable
		154	error messages (it's usually the same as C<"$!">).
		155
		156	Non-fatal errors can be retried by simply returning, but it is recommended
		157	to simply ignore this parameter and instead abondon the handle object
		158	when this callback is invoked. Examples of non-fatal errors are timeouts
		159	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
		160
		161	On callback entrance, the value of C<$!> contains the operating system
		162	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		163	C<EPROTO>).
		164
		165	While not mandatory, it is I<highly> recommended to set this callback, as
		166	you will not be notified of errors otherwise. The default simply calls
		167	C<croak>.
		168
		169	=item on_read => $cb->($handle)
		170
		171	This sets the default read callback, which is called when data arrives
		172	and no read request is in the queue (unlike read queue callbacks, this
		173	callback will only be called when at least one octet of data is in the
		174	read buffer).
		175
		176	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
		177	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		178	must not enlarge or modify the read buffer, you can only remove data at
		179	the beginning from it.
		180
		181	When an EOF condition is detected then AnyEvent::Handle will first try to
		182	feed all the remaining data to the queued callbacks and C<on_read> before
		183	calling the C<on_eof> callback. If no progress can be made, then a fatal
		184	error will be raised (with C<$!> set to C<EPIPE>).
		185
		186	Note that, unlike requests in the read queue, an C<on_read> callback
		187	doesn't mean you I<require> some data: if there is an EOF and there
		188	are outstanding read requests then an error will be flagged. With an
		189	C<on_read> callback, the C<on_eof> callback will be invoked.
		190
82	=item on_eof => $cb->($handle)	191	=item on_eof => $cb->($handle)
83		192
84	Set the callback to be called when an end-of-file condition is detected,	193	Set the callback to be called when an end-of-file condition is detected,
85	i.e. in the case of a socket, when the other side has closed the	194	i.e. in the case of a socket, when the other side has closed the
86	connection cleanly.	195	connection cleanly, and there are no outstanding read requests in the
		196	queue (if there are read requests, then an EOF counts as an unexpected
		197	connection close and will be flagged as an error).
87		198
88	For sockets, this just means that the other side has stopped sending data,	199	For sockets, this just means that the other side has stopped sending data,
89	you can still try to write data, and, in fact, one can return from the EOF	200	you can still try to write data, and, in fact, one can return from the EOF
90	callback and continue writing data, as only the read part has been shut	201	callback and continue writing data, as only the read part has been shut
91	down.	202	down.
92		203
93	While not mandatory, it is I<highly> recommended to set an EOF callback,
94	otherwise you might end up with a closed socket while you are still
95	waiting for data.
96
97	If an EOF condition has been detected but no C<on_eof> callback has been	204	If an EOF condition has been detected but no C<on_eof> callback has been
98	set, then a fatal error will be raised with C<$!> set to <0>.	205	set, then a fatal error will be raised with C<$!> set to <0>.
99
100	=item on_error => $cb->($handle, $fatal)
101
102	This is the error callback, which is called when, well, some error
103	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.
105
106	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable
108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
109	errors are an EOF condition with active (but unsatisifable) read watchers
110	(C<EPIPE>) or I/O errors.
111
112	Non-fatal errors can be retried by simply returning, but it is recommended
113	to simply ignore this parameter and instead abondon the handle object
114	when this callback is invoked. Examples of non-fatal errors are timeouts
115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
116
117	On callback entrance, the value of C<$!> contains the operating system
118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
119
120	While not mandatory, it is I<highly> recommended to set this callback, as
121	you will not be notified of errors otherwise. The default simply calls
122	C<croak>.
123
124	=item on_read => $cb->($handle)
125
126	This sets the default read callback, which is called when data arrives
127	and no read request is in the queue (unlike read queue callbacks, this
128	callback will only be called when at least one octet of data is in the
129	read buffer).
130
131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
132	method or access the C<$handle->{rbuf}> member directly.
133
134	When an EOF condition is detected then AnyEvent::Handle will first try to
135	feed all the remaining data to the queued callbacks and C<on_read> before
136	calling the C<on_eof> callback. If no progress can be made, then a fatal
137	error will be raised (with C<$!> set to C<EPIPE>).
138		206
139	=item on_drain => $cb->($handle)	207	=item on_drain => $cb->($handle)
140		208
141	This sets the callback that is called when the write buffer becomes empty	209	This sets the callback that is called when the write buffer becomes empty
142	(or when the callback is set and the buffer is empty already).	210	(or when the callback is set and the buffer is empty already).
…		…
149	memory and push it into the queue, but instead only read more data from	217	memory and push it into the queue, but instead only read more data from
150	the file when the write queue becomes empty.	218	the file when the write queue becomes empty.
151		219
152	=item timeout => $fractional_seconds	220	=item timeout => $fractional_seconds
153		221
		222	=item rtimeout => $fractional_seconds
		223
		224	=item wtimeout => $fractional_seconds
		225
154	If non-zero, then this enables an "inactivity" timeout: whenever this many	226	If non-zero, then these enables an "inactivity" timeout: whenever this
155	seconds pass without a successful read or write on the underlying file	227	many seconds pass without a successful read or write on the underlying
156	handle, the C<on_timeout> callback will be invoked (and if that one is	228	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
157	missing, a non-fatal C<ETIMEDOUT> error will be raised).	229	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		230	error will be raised).
		231
		232	There are three variants of the timeouts that work fully independent
		233	of each other, for both read and write, just read, and just write:
		234	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		235	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		236	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
158		237
159	Note that timeout processing is also active when you currently do not have	238	Note that timeout processing is also active when you currently do not have
160	any outstanding read or write requests: If you plan to keep the connection	239	any outstanding read or write requests: If you plan to keep the connection
161	idle then you should disable the timout temporarily or ignore the timeout	240	idle then you should disable the timout temporarily or ignore the timeout
162	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	241	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
…		…
235		314
236	This will not work for partial TLS data that could not be encoded	315	This will not work for partial TLS data that could not be encoded
237	yet. This data will be lost. Calling the C<stoptls> method in time might	316	yet. This data will be lost. Calling the C<stoptls> method in time might
238	help.	317	help.
239		318
		319	=item peername => $string
		320
		321	A string used to identify the remote site - usually the DNS hostname
		322	(I<not> IDN!) used to create the connection, rarely the IP address.
		323
		324	Apart from being useful in error messages, this string is also used in TLS
		325	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		326	verification will be skipped when C<peername> is not specified or
		327	C<undef>.
		328
240	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	329	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
241		330
242	When this parameter is given, it enables TLS (SSL) mode, that means	331	When this parameter is given, it enables TLS (SSL) mode, that means
243	AnyEvent will start a TLS handshake as soon as the conenction has been	332	AnyEvent will start a TLS handshake as soon as the conenction has been
244	established and will transparently encrypt/decrypt data afterwards.	333	established and will transparently encrypt/decrypt data afterwards.
		334
		335	All TLS protocol errors will be signalled as C<EPROTO>, with an
		336	appropriate error message.
245		337
246	TLS mode requires Net::SSLeay to be installed (it will be loaded	338	TLS mode requires Net::SSLeay to be installed (it will be loaded
247	automatically when you try to create a TLS handle): this module doesn't	339	automatically when you try to create a TLS handle): this module doesn't
248	have a dependency on that module, so if your module requires it, you have	340	have a dependency on that module, so if your module requires it, you have
249	to add the dependency yourself.	341	to add the dependency yourself.
…		…
253	mode.	345	mode.
254		346
255	You can also provide your own TLS connection object, but you have	347	You can also provide your own TLS connection object, but you have
256	to make sure that you call either C<Net::SSLeay::set_connect_state>	348	to make sure that you call either C<Net::SSLeay::set_connect_state>
257	or C<Net::SSLeay::set_accept_state> on it before you pass it to	349	or C<Net::SSLeay::set_accept_state> on it before you pass it to
258	AnyEvent::Handle.	350	AnyEvent::Handle. Also, this module will take ownership of this connection
		351	object.
		352
		353	At some future point, AnyEvent::Handle might switch to another TLS
		354	implementation, then the option to use your own session object will go
		355	away.
259		356
260	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,	357	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
261	passing in the wrong integer will lead to certain crash. This most often	358	passing in the wrong integer will lead to certain crash. This most often
262	happens when one uses a stylish C<< tls => 1 >> and is surprised about the	359	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
263	segmentation fault.	360	segmentation fault.
264		361
265	See the C<< ->starttls >> method for when need to start TLS negotiation later.	362	See the C<< ->starttls >> method for when need to start TLS negotiation later.
266		363
267	=item tls_ctx => $ssl_ctx	364	=item tls_ctx => $anyevent_tls
268		365
269	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection	366	Use the given C<AnyEvent::TLS> object to create the new TLS connection
270	(unless a connection object was specified directly). If this parameter is	367	(unless a connection object was specified directly). If this parameter is
271	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	368	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
		369
		370	Instead of an object, you can also specify a hash reference with C<< key
		371	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		372	new TLS context object.
		373
		374	=item on_starttls => $cb->($handle, $success[, $error_message])
		375
		376	This callback will be invoked when the TLS/SSL handshake has finished. If
		377	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		378	(C<on_stoptls> will not be called in this case).
		379
		380	The session in C<< $handle->{tls} >> can still be examined in this
		381	callback, even when the handshake was not successful.
		382
		383	TLS handshake failures will not cause C<on_error> to be invoked when this
		384	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		385
		386	Without this callback, handshake failures lead to C<on_error> being
		387	called, as normal.
		388
		389	Note that you cannot call C<starttls> right again in this callback. If you
		390	need to do that, start an zero-second timer instead whose callback can
		391	then call C<< ->starttls >> again.
		392
		393	=item on_stoptls => $cb->($handle)
		394
		395	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		396	set, then it will be invoked after freeing the TLS session. If it is not,
		397	then a TLS shutdown condition will be treated like a normal EOF condition
		398	on the handle.
		399
		400	The session in C<< $handle->{tls} >> can still be examined in this
		401	callback.
		402
		403	This callback will only be called on TLS shutdowns, not when the
		404	underlying handle signals EOF.
272		405
273	=item json => JSON or JSON::XS object	406	=item json => JSON or JSON::XS object
274		407
275	This is the json coder object used by the C<json> read and write types.	408	This is the json coder object used by the C<json> read and write types.
276		409
…		…
285		418
286	=cut	419	=cut
287		420
288	sub new {	421	sub new {
289	my $class = shift;	422	my $class = shift;
290
291	my $self = bless { @_ }, $class;	423	my $self = bless { @_ }, $class;
292		424
293	$self->{fh} or Carp::croak "mandatory argument fh is missing";	425	if ($self->{fh}) {
		426	$self->_start;
		427	return unless $self->{fh}; # could be gone by now
		428
		429	} elsif ($self->{connect}) {
		430	require AnyEvent::Socket;
		431
		432	$self->{peername} = $self->{connect}[0]
		433	unless exists $self->{peername};
		434
		435	$self->{_skip_drain_rbuf} = 1;
		436
		437	{
		438	Scalar::Util::weaken (my $self = $self);
		439
		440	$self->{_connect} =
		441	AnyEvent::Socket::tcp_connect (
		442	$self->{connect}[0],
		443	$self->{connect}[1],
		444	sub {
		445	my ($fh, $host, $port, $retry) = @_;
		446
		447	if ($fh) {
		448	$self->{fh} = $fh;
		449
		450	delete $self->{_skip_drain_rbuf};
		451	$self->_start;
		452
		453	$self->{on_connect}
		454	and $self->{on_connect}($self, $host, $port, sub {
		455	delete @$self{qw(fh _tw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		456	$self->{_skip_drain_rbuf} = 1;
		457	&$retry;
		458	});
		459
		460	} else {
		461	if ($self->{on_connect_error}) {
		462	$self->{on_connect_error}($self, "$!");
		463	$self->destroy;
		464	} else {
		465	$self->_error ($!, 1);
		466	}
		467	}
		468	},
		469	sub {
		470	local $self->{fh} = $_[0];
		471
		472	$self->{on_prepare}
		473	? $self->{on_prepare}->($self)
		474	: ()
		475	}
		476	);
		477	}
		478
		479	} else {
		480	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		481	}
		482
		483	$self
		484	}
		485
		486	sub _start {
		487	my ($self) = @_;
294		488
295	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	489	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
		490
		491	$self->{_activity} =
		492	$self->{_ractivity} =
		493	$self->{_wactivity} = AE::now;
		494
		495	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		496	$self->rtimeout (delete $self->{rtimeout}) if $self->{rtimeout};
		497	$self->wtimeout (delete $self->{wtimeout}) if $self->{wtimeout};
		498
		499	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
296		500
297	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})	501	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
298	if $self->{tls};	502	if $self->{tls};
299		503
300	$self->{_activity} = AnyEvent->now;
301	$self->_timeout;
302
303	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	504	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
304	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
305		505
306	$self->start_read	506	$self->start_read
307	if $self->{on_read};	507	if $self->{on_read} || @{ $self->{_queue} };
308		508
309	$self	509	$self->_drain_wbuf;
310	}	510	}
311		511
312	sub _shutdown {	512	#sub _shutdown {
313	my ($self) = @_;	513	# my ($self) = @_;
314		514	#
315	delete $self->{_tw};	515	# delete @$self{qw(_tw _rw _ww fh wbuf on_read _queue)};
316	delete $self->{_rw};	516	# $self->{_eof} = 1; # tell starttls et. al to stop trying
317	delete $self->{_ww};	517	#
318	delete $self->{fh};
319
320	&_freetls;	518	# &_freetls;
321		519	#}
322	delete $self->{on_read};
323	delete $self->{_queue};
324	}
325		520
326	sub _error {	521	sub _error {
327	my ($self, $errno, $fatal) = @_;	522	my ($self, $errno, $fatal, $message) = @_;
328
329	$self->_shutdown
330	if $fatal;
331		523
332	$! = $errno;	524	$! = $errno;
		525	$message ||= "$!";
333		526
334	if ($self->{on_error}) {	527	if ($self->{on_error}) {
335	$self->{on_error}($self, $fatal);	528	$self->{on_error}($self, $fatal, $message);
		529	$self->destroy if $fatal;
336	} elsif ($self->{fh}) {	530	} elsif ($self->{fh}) {
		531	$self->destroy;
337	Carp::croak "AnyEvent::Handle uncaught error: $!";	532	Carp::croak "AnyEvent::Handle uncaught error: $message";
338	}	533	}
339	}	534	}
340		535
341	=item $fh = $handle->fh	536	=item $fh = $handle->fh
342		537
…		…
366	$_[0]{on_eof} = $_[1];	561	$_[0]{on_eof} = $_[1];
367	}	562	}
368		563
369	=item $handle->on_timeout ($cb)	564	=item $handle->on_timeout ($cb)
370		565
371	Replace the current C<on_timeout> callback, or disables the callback (but	566	=item $handle->on_rtimeout ($cb)
372	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
373	argument and method.
374		567
375	=cut	568	=item $handle->on_wtimeout ($cb)
376		569
377	sub on_timeout {	570	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
378	$_[0]{on_timeout} = $_[1];	571	callback, or disables the callback (but not the timeout) if C<$cb> =
379	}	572	C<undef>. See the C<timeout> constructor argument and method.
		573
		574	=cut
		575
		576	# see below
380		577
381	=item $handle->autocork ($boolean)	578	=item $handle->autocork ($boolean)
382		579
383	Enables or disables the current autocork behaviour (see C<autocork>	580	Enables or disables the current autocork behaviour (see C<autocork>
384	constructor argument). Changes will only take effect on the next write.	581	constructor argument). Changes will only take effect on the next write.
…		…
399	sub no_delay {	596	sub no_delay {
400	$_[0]{no_delay} = $_[1];	597	$_[0]{no_delay} = $_[1];
401		598
402	eval {	599	eval {
403	local $SIG{__DIE__};	600	local $SIG{__DIE__};
404	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	601	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1]
		602	if $_[0]{fh};
405	};	603	};
406	}	604	}
407		605
		606	=item $handle->on_starttls ($cb)
		607
		608	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		609
		610	=cut
		611
		612	sub on_starttls {
		613	$_[0]{on_starttls} = $_[1];
		614	}
		615
		616	=item $handle->on_stoptls ($cb)
		617
		618	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		619
		620	=cut
		621
		622	sub on_starttls {
		623	$_[0]{on_stoptls} = $_[1];
		624	}
		625
		626	=item $handle->rbuf_max ($max_octets)
		627
		628	Configures the C<rbuf_max> setting (C<undef> disables it).
		629
		630	=cut
		631
		632	sub rbuf_max {
		633	$_[0]{rbuf_max} = $_[1];
		634	}
		635
408	#############################################################################	636	#############################################################################
409		637
410	=item $handle->timeout ($seconds)	638	=item $handle->timeout ($seconds)
411		639
		640	=item $handle->rtimeout ($seconds)
		641
		642	=item $handle->wtimeout ($seconds)
		643
412	Configures (or disables) the inactivity timeout.	644	Configures (or disables) the inactivity timeout.
413		645
414	=cut	646	=item $handle->timeout_reset
415		647
416	sub timeout {	648	=item $handle->rtimeout_reset
		649
		650	=item $handle->wtimeout_reset
		651
		652	Reset the activity timeout, as if data was received or sent.
		653
		654	These methods are cheap to call.
		655
		656	=cut
		657
		658	for my $dir ("", "r", "w") {
		659	my $timeout = "${dir}timeout";
		660	my $tw = "_${dir}tw";
		661	my $on_timeout = "on_${dir}timeout";
		662	my $activity = "_${dir}activity";
		663	my $cb;
		664
		665	*$on_timeout = sub {
		666	$_[0]{$on_timeout} = $_[1];
		667	};
		668
		669	*$timeout = sub {
417	my ($self, $timeout) = @_;	670	my ($self, $new_value) = @_;
418		671
419	$self->{timeout} = $timeout;	672	$self->{$timeout} = $new_value;
420	$self->_timeout;	673	delete $self->{$tw}; &$cb;
421	}	674	};
422		675
		676	*{"${dir}timeout_reset"} = sub {
		677	$_[0]{$activity} = AE::now;
		678	};
		679
		680	# main workhorse:
423	# reset the timeout watcher, as neccessary	681	# reset the timeout watcher, as neccessary
424	# also check for time-outs	682	# also check for time-outs
425	sub _timeout {	683	$cb = sub {
426	my ($self) = @_;	684	my ($self) = @_;
427		685
428	if ($self->{timeout}) {	686	if ($self->{$timeout} && $self->{fh}) {
429	my $NOW = AnyEvent->now;	687	my $NOW = AE::now;
430		688
431	# when would the timeout trigger?	689	# when would the timeout trigger?
432	my $after = $self->{_activity} + $self->{timeout} - $NOW;	690	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
433		691
434	# now or in the past already?	692	# now or in the past already?
435	if ($after <= 0) {	693	if ($after <= 0) {
436	$self->{_activity} = $NOW;	694	$self->{$activity} = $NOW;
437		695
438	if ($self->{on_timeout}) {	696	if ($self->{$on_timeout}) {
439	$self->{on_timeout}($self);	697	$self->{$on_timeout}($self);
440	} else {	698	} else {
441	$self->_error (&Errno::ETIMEDOUT);	699	$self->_error (Errno::ETIMEDOUT);
		700	}
		701
		702	# callback could have changed timeout value, optimise
		703	return unless $self->{$timeout};
		704
		705	# calculate new after
		706	$after = $self->{$timeout};
442	}	707	}
443		708
444	# callback could have changed timeout value, optimise	709	Scalar::Util::weaken $self;
445	return unless $self->{timeout};	710	return unless $self; # ->error could have destroyed $self
446		711
447	# calculate new after	712	$self->{$tw} ||= AE::timer $after, 0, sub {
448	$after = $self->{timeout};	713	delete $self->{$tw};
		714	$cb->($self);
		715	};
		716	} else {
		717	delete $self->{$tw};
449	}	718	}
450
451	Scalar::Util::weaken $self;
452	return unless $self; # ->error could have destroyed $self
453
454	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
455	delete $self->{_tw};
456	$self->_timeout;
457	});
458	} else {
459	delete $self->{_tw};
460	}	719	}
461	}	720	}
462		721
463	#############################################################################	722	#############################################################################
464		723
…		…
509	Scalar::Util::weaken $self;	768	Scalar::Util::weaken $self;
510		769
511	my $cb = sub {	770	my $cb = sub {
512	my $len = syswrite $self->{fh}, $self->{wbuf};	771	my $len = syswrite $self->{fh}, $self->{wbuf};
513		772
514	if ($len >= 0) {	773	if (defined $len) {
515	substr $self->{wbuf}, 0, $len, "";	774	substr $self->{wbuf}, 0, $len, "";
516		775
517	$self->{_activity} = AnyEvent->now;	776	$self->{_activity} = $self->{_wactivity} = AE::now;
518		777
519	$self->{on_drain}($self)	778	$self->{on_drain}($self)
520	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})	779	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
521	&& $self->{on_drain};	780	&& $self->{on_drain};
522		781
…		…
528		787
529	# try to write data immediately	788	# try to write data immediately
530	$cb->() unless $self->{autocork};	789	$cb->() unless $self->{autocork};
531		790
532	# if still data left in wbuf, we need to poll	791	# if still data left in wbuf, we need to poll
533	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	792	$self->{_ww} = AE::io $self->{fh}, 1, $cb
534	if length $self->{wbuf};	793	if length $self->{wbuf};
535	};	794	};
536	}	795	}
537		796
538	our %WH;	797	our %WH;
…		…
551	->($self, @_);	810	->($self, @_);
552	}	811	}
553		812
554	if ($self->{tls}) {	813	if ($self->{tls}) {
555	$self->{_tls_wbuf} .= $_[0];	814	$self->{_tls_wbuf} .= $_[0];
556		815	&_dotls ($self) if $self->{fh};
557	&_dotls ($self);
558	} else {	816	} else {
559	$self->{wbuf} .= $_[0];	817	$self->{wbuf} .= $_[0];
560	$self->_drain_wbuf;	818	$self->_drain_wbuf if $self->{fh};
561	}	819	}
562	}	820	}
563		821
564	=item $handle->push_write (type => @args)	822	=item $handle->push_write (type => @args)
565		823
…		…
654		912
655	pack "w/a*", Storable::nfreeze ($ref)	913	pack "w/a*", Storable::nfreeze ($ref)
656	};	914	};
657		915
658	=back	916	=back
		917
		918	=item $handle->push_shutdown
		919
		920	Sometimes you know you want to close the socket after writing your data
		921	before it was actually written. One way to do that is to replace your
		922	C<on_drain> handler by a callback that shuts down the socket (and set
		923	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		924	replaces the C<on_drain> callback with:
		925
		926	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		927
		928	This simply shuts down the write side and signals an EOF condition to the
		929	the peer.
		930
		931	You can rely on the normal read queue and C<on_eof> handling
		932	afterwards. This is the cleanest way to close a connection.
		933
		934	=cut
		935
		936	sub push_shutdown {
		937	my ($self) = @_;
		938
		939	delete $self->{low_water_mark};
		940	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		941	}
659		942
660	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	943	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
661		944
662	This function (not method) lets you add your own types to C<push_write>.	945	This function (not method) lets you add your own types to C<push_write>.
663	Whenever the given C<type> is used, C<push_write> will invoke the code	946	Whenever the given C<type> is used, C<push_write> will invoke the code
…		…
757	=cut	1040	=cut
758		1041
759	sub _drain_rbuf {	1042	sub _drain_rbuf {
760	my ($self) = @_;	1043	my ($self) = @_;
761		1044
		1045	# avoid recursion
		1046	return if $self->{_skip_drain_rbuf};
762	local $self->{_in_drain} = 1;	1047	local $self->{_skip_drain_rbuf} = 1;
763
764	if (
765	defined $self->{rbuf_max}
766	&& $self->{rbuf_max} < length $self->{rbuf}
767	) {
768	$self->_error (&Errno::ENOSPC, 1), return;
769	}
770		1048
771	while () {	1049	while () {
772	$self->{rbuf} .= delete $self->{tls_rbuf} if exists $self->{tls_rbuf};#d#	1050	# we need to use a separate tls read buffer, as we must not receive data while
		1051	# we are draining the buffer, and this can only happen with TLS.
		1052	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1053	if exists $self->{_tls_rbuf};
773		1054
774	my $len = length $self->{rbuf};	1055	my $len = length $self->{rbuf};
775		1056
776	if (my $cb = shift @{ $self->{_queue} }) {	1057	if (my $cb = shift @{ $self->{_queue} }) {
777	unless ($cb->($self)) {	1058	unless ($cb->($self)) {
778	if ($self->{_eof}) {	1059	# no progress can be made
779	# no progress can be made (not enough data and no data forthcoming)	1060	# (not enough data and no data forthcoming)
780	$self->_error (&Errno::EPIPE, 1), return;	1061	$self->_error (Errno::EPIPE, 1), return
781	}	1062	if $self->{_eof};
782		1063
783	unshift @{ $self->{_queue} }, $cb;	1064	unshift @{ $self->{_queue} }, $cb;
784	last;	1065	last;
785	}	1066	}
786	} elsif ($self->{on_read}) {	1067	} elsif ($self->{on_read}) {
…		…
793	&& !@{ $self->{_queue} } # and the queue is still empty	1074	&& !@{ $self->{_queue} } # and the queue is still empty
794	&& $self->{on_read} # but we still have on_read	1075	&& $self->{on_read} # but we still have on_read
795	) {	1076	) {
796	# no further data will arrive	1077	# no further data will arrive
797	# so no progress can be made	1078	# so no progress can be made
798	$self->_error (&Errno::EPIPE, 1), return	1079	$self->_error (Errno::EPIPE, 1), return
799	if $self->{_eof};	1080	if $self->{_eof};
800		1081
801	last; # more data might arrive	1082	last; # more data might arrive
802	}	1083	}
803	} else {	1084	} else {
…		…
806	last;	1087	last;
807	}	1088	}
808	}	1089	}
809		1090
810	if ($self->{_eof}) {	1091	if ($self->{_eof}) {
811	if ($self->{on_eof}) {	1092	$self->{on_eof}
812	$self->{on_eof}($self)	1093	? $self->{on_eof}($self)
813	} else {	1094	: $self->_error (0, 1, "Unexpected end-of-file");
814	$self->_error (0, 1);	1095
815	}	1096	return;
		1097	}
		1098
		1099	if (
		1100	defined $self->{rbuf_max}
		1101	&& $self->{rbuf_max} < length $self->{rbuf}
		1102	) {
		1103	$self->_error (Errno::ENOSPC, 1), return;
816	}	1104	}
817		1105
818	# may need to restart read watcher	1106	# may need to restart read watcher
819	unless ($self->{_rw}) {	1107	unless ($self->{_rw}) {
820	$self->start_read	1108	$self->start_read
…		…
832		1120
833	sub on_read {	1121	sub on_read {
834	my ($self, $cb) = @_;	1122	my ($self, $cb) = @_;
835		1123
836	$self->{on_read} = $cb;	1124	$self->{on_read} = $cb;
837	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1125	$self->_drain_rbuf if $cb;
838	}	1126	}
839		1127
840	=item $handle->rbuf	1128	=item $handle->rbuf
841		1129
842	Returns the read buffer (as a modifiable lvalue).	1130	Returns the read buffer (as a modifiable lvalue).
843		1131
844	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1132	You can access the read buffer directly as the C<< ->{rbuf} >>
845	you want.	1133	member, if you want. However, the only operation allowed on the
		1134	read buffer (apart from looking at it) is removing data from its
		1135	beginning. Otherwise modifying or appending to it is not allowed and will
		1136	lead to hard-to-track-down bugs.
846		1137
847	NOTE: The read buffer should only be used or modified if the C<on_read>,	1138	NOTE: The read buffer should only be used or modified if the C<on_read>,
848	C<push_read> or C<unshift_read> methods are used. The other read methods	1139	C<push_read> or C<unshift_read> methods are used. The other read methods
849	automatically manage the read buffer.	1140	automatically manage the read buffer.
850		1141
…		…
891	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1182	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
892	->($self, $cb, @_);	1183	->($self, $cb, @_);
893	}	1184	}
894		1185
895	push @{ $self->{_queue} }, $cb;	1186	push @{ $self->{_queue} }, $cb;
896	$self->_drain_rbuf unless $self->{_in_drain};	1187	$self->_drain_rbuf;
897	}	1188	}
898		1189
899	sub unshift_read {	1190	sub unshift_read {
900	my $self = shift;	1191	my $self = shift;
901	my $cb = pop;	1192	my $cb = pop;
…		…
907	->($self, $cb, @_);	1198	->($self, $cb, @_);
908	}	1199	}
909		1200
910		1201
911	unshift @{ $self->{_queue} }, $cb;	1202	unshift @{ $self->{_queue} }, $cb;
912	$self->_drain_rbuf unless $self->{_in_drain};	1203	$self->_drain_rbuf;
913	}	1204	}
914		1205
915	=item $handle->push_read (type => @args, $cb)	1206	=item $handle->push_read (type => @args, $cb)
916		1207
917	=item $handle->unshift_read (type => @args, $cb)	1208	=item $handle->unshift_read (type => @args, $cb)
…		…
1050	return 1;	1341	return 1;
1051	}	1342	}
1052		1343
1053	# reject	1344	# reject
1054	if ($reject && $$rbuf =~ $reject) {	1345	if ($reject && $$rbuf =~ $reject) {
1055	$self->_error (&Errno::EBADMSG);	1346	$self->_error (Errno::EBADMSG);
1056	}	1347	}
1057		1348
1058	# skip	1349	# skip
1059	if ($skip && $$rbuf =~ $skip) {	1350	if ($skip && $$rbuf =~ $skip) {
1060	$data .= substr $$rbuf, 0, $+[0], "";	1351	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1076	my ($self, $cb) = @_;	1367	my ($self, $cb) = @_;
1077		1368
1078	sub {	1369	sub {
1079	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1370	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1080	if ($_[0]{rbuf} =~ /[^0-9]/) {	1371	if ($_[0]{rbuf} =~ /[^0-9]/) {
1081	$self->_error (&Errno::EBADMSG);	1372	$self->_error (Errno::EBADMSG);
1082	}	1373	}
1083	return;	1374	return;
1084	}	1375	}
1085		1376
1086	my $len = $1;	1377	my $len = $1;
…		…
1089	my $string = $_[1];	1380	my $string = $_[1];
1090	$_[0]->unshift_read (chunk => 1, sub {	1381	$_[0]->unshift_read (chunk => 1, sub {
1091	if ($_[1] eq ",") {	1382	if ($_[1] eq ",") {
1092	$cb->($_[0], $string);	1383	$cb->($_[0], $string);
1093	} else {	1384	} else {
1094	$self->_error (&Errno::EBADMSG);	1385	$self->_error (Errno::EBADMSG);
1095	}	1386	}
1096	});	1387	});
1097	});	1388	});
1098		1389
1099	1	1390	1
…		…
1166	=cut	1457	=cut
1167		1458
1168	register_read_type json => sub {	1459	register_read_type json => sub {
1169	my ($self, $cb) = @_;	1460	my ($self, $cb) = @_;
1170		1461
1171	require JSON;	1462	my $json = $self->{json} ||=
		1463	eval { require JSON::XS; JSON::XS->new->utf8 }
		1464	|| do { require JSON; JSON->new->utf8 };
1172		1465
1173	my $data;	1466	my $data;
1174	my $rbuf = \$self->{rbuf};	1467	my $rbuf = \$self->{rbuf};
1175
1176	my $json = $self->{json} ||= JSON->new->utf8;
1177		1468
1178	sub {	1469	sub {
1179	my $ref = eval { $json->incr_parse ($self->{rbuf}) };	1470	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1180		1471
1181	if ($ref) {	1472	if ($ref) {
…		…
1189	$json->incr_skip;	1480	$json->incr_skip;
1190		1481
1191	$self->{rbuf} = $json->incr_text;	1482	$self->{rbuf} = $json->incr_text;
1192	$json->incr_text = "";	1483	$json->incr_text = "";
1193		1484
1194	$self->_error (&Errno::EBADMSG);	1485	$self->_error (Errno::EBADMSG);
1195		1486
1196	()	1487	()
1197	} else {	1488	} else {
1198	$self->{rbuf} = "";	1489	$self->{rbuf} = "";
1199		1490
…		…
1236	# read remaining chunk	1527	# read remaining chunk
1237	$_[0]->unshift_read (chunk => $len, sub {	1528	$_[0]->unshift_read (chunk => $len, sub {
1238	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1529	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1239	$cb->($_[0], $ref);	1530	$cb->($_[0], $ref);
1240	} else {	1531	} else {
1241	$self->_error (&Errno::EBADMSG);	1532	$self->_error (Errno::EBADMSG);
1242	}	1533	}
1243	});	1534	});
1244	}	1535	}
1245		1536
1246	1	1537	1
…		…
1298	my ($self) = @_;	1589	my ($self) = @_;
1299		1590
1300	unless ($self->{_rw} || $self->{_eof}) {	1591	unless ($self->{_rw} || $self->{_eof}) {
1301	Scalar::Util::weaken $self;	1592	Scalar::Util::weaken $self;
1302		1593
1303	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1594	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1304	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});	1595	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1305	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1596	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1306		1597
1307	if ($len > 0) {	1598	if ($len > 0) {
1308	$self->{_activity} = AnyEvent->now;	1599	$self->{_activity} = $self->{_ractivity} = AE::now;
1309		1600
1310	if ($self->{tls}) {	1601	if ($self->{tls}) {
1311	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);	1602	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1312		1603
1313	&_dotls ($self);	1604	&_dotls ($self);
1314	} else {	1605	} else {
1315	$self->_drain_rbuf unless $self->{_in_drain};	1606	$self->_drain_rbuf;
1316	}	1607	}
1317		1608
1318	} elsif (defined $len) {	1609	} elsif (defined $len) {
1319	delete $self->{_rw};	1610	delete $self->{_rw};
1320	$self->{_eof} = 1;	1611	$self->{_eof} = 1;
1321	$self->_drain_rbuf unless $self->{_in_drain};	1612	$self->_drain_rbuf;
1322		1613
1323	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1614	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1324	return $self->_error ($!, 1);	1615	return $self->_error ($!, 1);
1325	}	1616	}
1326	});	1617	};
		1618	}
		1619	}
		1620
		1621	our $ERROR_SYSCALL;
		1622	our $ERROR_WANT_READ;
		1623
		1624	sub _tls_error {
		1625	my ($self, $err) = @_;
		1626
		1627	return $self->_error ($!, 1)
		1628	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1629
		1630	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1631
		1632	# reduce error string to look less scary
		1633	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1634
		1635	if ($self->{_on_starttls}) {
		1636	(delete $self->{_on_starttls})->($self, undef, $err);
		1637	&_freetls;
		1638	} else {
		1639	&_freetls;
		1640	$self->_error (Errno::EPROTO, 1, $err);
1327	}	1641	}
1328	}	1642	}
1329		1643
1330	# poll the write BIO and send the data if applicable	1644	# poll the write BIO and send the data if applicable
		1645	# also decode read data if possible
		1646	# this is basiclaly our TLS state machine
		1647	# more efficient implementations are possible with openssl,
		1648	# but not with the buggy and incomplete Net::SSLeay.
1331	sub _dotls {	1649	sub _dotls {
1332	my ($self) = @_;	1650	my ($self) = @_;
1333		1651
1334	my $tmp;	1652	my $tmp;
1335		1653
1336	if (length $self->{_tls_wbuf}) {	1654	if (length $self->{_tls_wbuf}) {
1337	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1655	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1338	substr $self->{_tls_wbuf}, 0, $tmp, "";	1656	substr $self->{_tls_wbuf}, 0, $tmp, "";
1339	}	1657	}
		1658
		1659	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1660	return $self->_tls_error ($tmp)
		1661	if $tmp != $ERROR_WANT_READ
		1662	&& ($tmp != $ERROR_SYSCALL || $!);
1340	}	1663	}
1341		1664
1342	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {	1665	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1343	unless (length $tmp) {	1666	unless (length $tmp) {
1344	# let's treat SSL-eof as we treat normal EOF	1667	$self->{_on_starttls}
1345	delete $self->{_rw};	1668	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
1346	$self->{_eof} = 1;
1347	&_freetls;	1669	&_freetls;
		1670
		1671	if ($self->{on_stoptls}) {
		1672	$self->{on_stoptls}($self);
		1673	return;
		1674	} else {
		1675	# let's treat SSL-eof as we treat normal EOF
		1676	delete $self->{_rw};
		1677	$self->{_eof} = 1;
		1678	}
1348	}	1679	}
1349		1680
1350	$self->{tls_rbuf} .= $tmp;#d#	1681	$self->{_tls_rbuf} .= $tmp;
1351	$self->_drain_rbuf unless $self->{_in_drain};	1682	$self->_drain_rbuf;
1352	$self->{tls} or return; # tls session might have gone away in callback	1683	$self->{tls} or return; # tls session might have gone away in callback
1353	}	1684	}
1354		1685
1355	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);	1686	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1356
1357	if ($tmp != Net::SSLeay::ERROR_WANT_READ ()) {
1358	if ($tmp == Net::SSLeay::ERROR_SYSCALL ()) {
1359	return $self->_error ($!, 1);	1687	return $self->_tls_error ($tmp)
1360	} elsif ($tmp == Net::SSLeay::ERROR_SSL ()) {	1688	if $tmp != $ERROR_WANT_READ
1361	return $self->_error (&Errno::EIO, 1);	1689	&& ($tmp != $ERROR_SYSCALL || $!);
1362	}
1363
1364	# all other errors are fine for our purposes
1365	}
1366		1690
1367	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1691	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1368	$self->{wbuf} .= $tmp;	1692	$self->{wbuf} .= $tmp;
1369	$self->_drain_wbuf;	1693	$self->_drain_wbuf;
1370	}	1694	}
		1695
		1696	$self->{_on_starttls}
		1697	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
		1698	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1371	}	1699	}
1372		1700
1373	=item $handle->starttls ($tls[, $tls_ctx])	1701	=item $handle->starttls ($tls[, $tls_ctx])
1374		1702
1375	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1703	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1376	object is created, you can also do that at a later time by calling	1704	object is created, you can also do that at a later time by calling
1377	C<starttls>.	1705	C<starttls>.
1378		1706
		1707	Starting TLS is currently an asynchronous operation - when you push some
		1708	write data and then call C<< ->starttls >> then TLS negotiation will start
		1709	immediately, after which the queued write data is then sent.
		1710
1379	The first argument is the same as the C<tls> constructor argument (either	1711	The first argument is the same as the C<tls> constructor argument (either
1380	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1712	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1381		1713
1382	The second argument is the optional C<Net::SSLeay::CTX> object that is	1714	The second argument is the optional C<AnyEvent::TLS> object that is used
1383	used when AnyEvent::Handle has to create its own TLS connection object.	1715	when AnyEvent::Handle has to create its own TLS connection object, or
		1716	a hash reference with C<< key => value >> pairs that will be used to
		1717	construct a new context.
1384		1718
1385	The TLS connection object will end up in C<< $handle->{tls} >> after this	1719	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1386	call and can be used or changed to your liking. Note that the handshake	1720	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1387	might have already started when this function returns.	1721	changed to your liking. Note that the handshake might have already started
		1722	when this function returns.
1388		1723
1389	If it an error to start a TLS handshake more than once per	1724	Due to bugs in OpenSSL, it might or might not be possible to do multiple
1390	AnyEvent::Handle object (this is due to bugs in OpenSSL).	1725	handshakes on the same stream. Best do not attempt to use the stream after
		1726	stopping TLS.
1391		1727
1392	=cut	1728	=cut
		1729
		1730	our %TLS_CACHE; #TODO not yet documented, should we?
1393		1731
1394	sub starttls {	1732	sub starttls {
1395	my ($self, $ssl, $ctx) = @_;	1733	my ($self, $tls, $ctx) = @_;
		1734
		1735	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1736	if $self->{tls};
		1737
		1738	$self->{tls} = $tls;
		1739	$self->{tls_ctx} = $ctx if @_ > 2;
		1740
		1741	return unless $self->{fh};
1396		1742
1397	require Net::SSLeay;	1743	require Net::SSLeay;
1398		1744
1399	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"	1745	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1746	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1747
1400	if $self->{tls};	1748	$tls = $self->{tls};
		1749	$ctx = $self->{tls_ctx};
		1750
		1751	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1752
		1753	if ("HASH" eq ref $ctx) {
		1754	require AnyEvent::TLS;
		1755
		1756	if ($ctx->{cache}) {
		1757	my $key = $ctx+0;
		1758	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1759	} else {
		1760	$ctx = new AnyEvent::TLS %$ctx;
		1761	}
		1762	}
1401		1763
1402	if ($ssl eq "accept") {	1764	$self->{tls_ctx} = $ctx || TLS_CTX ();
1403	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1765	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1404	Net::SSLeay::set_accept_state ($ssl);
1405	} elsif ($ssl eq "connect") {
1406	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());
1407	Net::SSLeay::set_connect_state ($ssl);
1408	}
1409
1410	$self->{tls} = $ssl;
1411		1766
1412	# basically, this is deep magic (because SSL_read should have the same issues)	1767	# basically, this is deep magic (because SSL_read should have the same issues)
1413	# but the openssl maintainers basically said: "trust us, it just works".	1768	# but the openssl maintainers basically said: "trust us, it just works".
1414	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1769	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1415	# and mismaintained ssleay-module doesn't even offer them).	1770	# and mismaintained ssleay-module doesn't even offer them).
…		…
1419	#	1774	#
1420	# note that we do not try to keep the length constant between writes as we are required to do.	1775	# note that we do not try to keep the length constant between writes as we are required to do.
1421	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	1776	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1422	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to	1777	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
1423	# have identity issues in that area.	1778	# have identity issues in that area.
1424	Net::SSLeay::CTX_set_mode ($self->{tls},	1779	# Net::SSLeay::CTX_set_mode ($ssl,
1425	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1780	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1426	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1781	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1782	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1427		1783
1428	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1784	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1429	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1785	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1430		1786
		1787	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1788
1431	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1789	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
		1790
		1791	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
		1792	if $self->{on_starttls};
1432		1793
1433	&_dotls; # need to trigger the initial handshake	1794	&_dotls; # need to trigger the initial handshake
1434	$self->start_read; # make sure we actually do read	1795	$self->start_read; # make sure we actually do read
1435	}	1796	}
1436		1797
1437	=item $handle->stoptls	1798	=item $handle->stoptls
1438		1799
1439	Shuts down the SSL connection - this makes a proper EOF handshake by	1800	Shuts down the SSL connection - this makes a proper EOF handshake by
1440	sending a close notify to the other side, but since OpenSSL doesn't	1801	sending a close notify to the other side, but since OpenSSL doesn't
1441	support non-blocking shut downs, it is not possible to re-use the stream	1802	support non-blocking shut downs, it is not guarenteed that you can re-use
1442	afterwards.	1803	the stream afterwards.
1443		1804
1444	=cut	1805	=cut
1445		1806
1446	sub stoptls {	1807	sub stoptls {
1447	my ($self) = @_;	1808	my ($self) = @_;
…		…
1449	if ($self->{tls}) {	1810	if ($self->{tls}) {
1450	Net::SSLeay::shutdown ($self->{tls});	1811	Net::SSLeay::shutdown ($self->{tls});
1451		1812
1452	&_dotls;	1813	&_dotls;
1453		1814
1454	# we don't give a shit. no, we do, but we can't. no...	1815	# # we don't give a shit. no, we do, but we can't. no...#d#
1455	# we, we... have to use openssl :/	1816	# # we, we... have to use openssl :/#d#
1456	&_freetls;	1817	# &_freetls;#d#
1457	}	1818	}
1458	}	1819	}
1459		1820
1460	sub _freetls {	1821	sub _freetls {
1461	my ($self) = @_;	1822	my ($self) = @_;
1462		1823
1463	return unless $self->{tls};	1824	return unless $self->{tls};
1464		1825
1465	Net::SSLeay::free (delete $self->{tls});	1826	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1827	if $self->{tls} > 0;
1466		1828
1467	delete @$self{qw(_rbio _wbio _tls_wbuf)};	1829	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1468	}	1830	}
1469		1831
1470	sub DESTROY {	1832	sub DESTROY {
1471	my $self = shift;	1833	my ($self) = @_;
1472		1834
1473	&_freetls;	1835	&_freetls;
1474		1836
1475	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1837	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1476		1838
1477	if ($linger && length $self->{wbuf}) {	1839	if ($linger && length $self->{wbuf} && $self->{fh}) {
1478	my $fh = delete $self->{fh};	1840	my $fh = delete $self->{fh};
1479	my $wbuf = delete $self->{wbuf};	1841	my $wbuf = delete $self->{wbuf};
1480		1842
1481	my @linger;	1843	my @linger;
1482		1844
1483	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	1845	push @linger, AE::io $fh, 1, sub {
1484	my $len = syswrite $fh, $wbuf, length $wbuf;	1846	my $len = syswrite $fh, $wbuf, length $wbuf;
1485		1847
1486	if ($len > 0) {	1848	if ($len > 0) {
1487	substr $wbuf, 0, $len, "";	1849	substr $wbuf, 0, $len, "";
1488	} else {	1850	} else {
1489	@linger = (); # end	1851	@linger = (); # end
1490	}	1852	}
1491	});	1853	};
1492	push @linger, AnyEvent->timer (after => $linger, cb => sub {	1854	push @linger, AE::timer $linger, 0, sub {
1493	@linger = ();	1855	@linger = ();
1494	});	1856	};
1495	}	1857	}
1496	}	1858	}
1497		1859
1498	=item $handle->destroy	1860	=item $handle->destroy
1499		1861
1500	Shuts down the handle object as much as possible - this call ensures that	1862	Shuts down the handle object as much as possible - this call ensures that
1501	no further callbacks will be invoked and resources will be freed as much	1863	no further callbacks will be invoked and as many resources as possible
1502	as possible. You must not call any methods on the object afterwards.	1864	will be freed. Any method you will call on the handle object after
		1865	destroying it in this way will be silently ignored (and it will return the
		1866	empty list).
1503		1867
1504	Normally, you can just "forget" any references to an AnyEvent::Handle	1868	Normally, you can just "forget" any references to an AnyEvent::Handle
1505	object and it will simply shut down. This works in fatal error and EOF	1869	object and it will simply shut down. This works in fatal error and EOF
1506	callbacks, as well as code outside. It does I<NOT> work in a read or write	1870	callbacks, as well as code outside. It does I<NOT> work in a read or write
1507	callback, so when you want to destroy the AnyEvent::Handle object from	1871	callback, so when you want to destroy the AnyEvent::Handle object from
1508	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in	1872	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
1509	that case.	1873	that case.
1510		1874
		1875	Destroying the handle object in this way has the advantage that callbacks
		1876	will be removed as well, so if those are the only reference holders (as
		1877	is common), then one doesn't need to do anything special to break any
		1878	reference cycles.
		1879
1511	The handle might still linger in the background and write out remaining	1880	The handle might still linger in the background and write out remaining
1512	data, as specified by the C<linger> option, however.	1881	data, as specified by the C<linger> option, however.
1513		1882
1514	=cut	1883	=cut
1515		1884
1516	sub destroy {	1885	sub destroy {
1517	my ($self) = @_;	1886	my ($self) = @_;
1518		1887
1519	$self->DESTROY;	1888	$self->DESTROY;
1520	%$self = ();	1889	%$self = ();
		1890	bless $self, "AnyEvent::Handle::destroyed";
		1891	}
		1892
		1893	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		1894	#nop
1521	}	1895	}
1522		1896
1523	=item AnyEvent::Handle::TLS_CTX	1897	=item AnyEvent::Handle::TLS_CTX
1524		1898
1525	This function creates and returns the Net::SSLeay::CTX object used by	1899	This function creates and returns the AnyEvent::TLS object used by default
1526	default for TLS mode.	1900	for TLS mode.
1527		1901
1528	The context is created like this:	1902	The context is created by calling L<AnyEvent::TLS> without any arguments.
1529
1530	Net::SSLeay::load_error_strings;
1531	Net::SSLeay::SSLeay_add_ssl_algorithms;
1532	Net::SSLeay::randomize;
1533
1534	my $CTX = Net::SSLeay::CTX_new;
1535
1536	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1537		1903
1538	=cut	1904	=cut
1539		1905
1540	our $TLS_CTX;	1906	our $TLS_CTX;
1541		1907
1542	sub TLS_CTX() {	1908	sub TLS_CTX() {
1543	$TLS_CTX || do {	1909	$TLS_CTX ||= do {
1544	require Net::SSLeay;	1910	require AnyEvent::TLS;
1545		1911
1546	Net::SSLeay::load_error_strings ();	1912	new AnyEvent::TLS
1547	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1548	Net::SSLeay::randomize ();
1549
1550	$TLS_CTX = Net::SSLeay::CTX_new ();
1551
1552	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1553
1554	$TLS_CTX
1555	}	1913	}
1556	}	1914	}
1557		1915
1558	=back	1916	=back
1559		1917
…		…
1598		1956
1599	$handle->on_read (sub { });	1957	$handle->on_read (sub { });
1600	$handle->on_eof (undef);	1958	$handle->on_eof (undef);
1601	$handle->on_error (sub {	1959	$handle->on_error (sub {
1602	my $data = delete $_[0]{rbuf};	1960	my $data = delete $_[0]{rbuf};
1603	undef $handle;
1604	});	1961	});
1605		1962
1606	The reason to use C<on_error> is that TCP connections, due to latencies	1963	The reason to use C<on_error> is that TCP connections, due to latencies
1607	and packets loss, might get closed quite violently with an error, when in	1964	and packets loss, might get closed quite violently with an error, when in
1608	fact, all data has been received.	1965	fact, all data has been received.
…		…
1624	$handle->on_drain (sub {	1981	$handle->on_drain (sub {
1625	warn "all data submitted to the kernel\n";	1982	warn "all data submitted to the kernel\n";
1626	undef $handle;	1983	undef $handle;
1627	});	1984	});
1628		1985
		1986	If you just want to queue some data and then signal EOF to the other side,
		1987	consider using C<< ->push_shutdown >> instead.
		1988
		1989	=item I want to contact a TLS/SSL server, I don't care about security.
		1990
		1991	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		1992	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		1993	parameter:
		1994
		1995	tcp_connect $host, $port, sub {
		1996	my ($fh) = @_;
		1997
		1998	my $handle = new AnyEvent::Handle
		1999	fh => $fh,
		2000	tls => "connect",
		2001	on_error => sub { ... };
		2002
		2003	$handle->push_write (...);
		2004	};
		2005
		2006	=item I want to contact a TLS/SSL server, I do care about security.
		2007
		2008	Then you should additionally enable certificate verification, including
		2009	peername verification, if the protocol you use supports it (see
		2010	L<AnyEvent::TLS>, C<verify_peername>).
		2011
		2012	E.g. for HTTPS:
		2013
		2014	tcp_connect $host, $port, sub {
		2015	my ($fh) = @_;
		2016
		2017	my $handle = new AnyEvent::Handle
		2018	fh => $fh,
		2019	peername => $host,
		2020	tls => "connect",
		2021	tls_ctx => { verify => 1, verify_peername => "https" },
		2022	...
		2023
		2024	Note that you must specify the hostname you connected to (or whatever
		2025	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2026	peername verification will be done.
		2027
		2028	The above will use the system-dependent default set of trusted CA
		2029	certificates. If you want to check against a specific CA, add the
		2030	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2031
		2032	tls_ctx => {
		2033	verify => 1,
		2034	verify_peername => "https",
		2035	ca_file => "my-ca-cert.pem",
		2036	},
		2037
		2038	=item I want to create a TLS/SSL server, how do I do that?
		2039
		2040	Well, you first need to get a server certificate and key. You have
		2041	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2042	self-signed certificate (cheap. check the search engine of your choice,
		2043	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2044	nice program for that purpose).
		2045
		2046	Then create a file with your private key (in PEM format, see
		2047	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2048	file should then look like this:
		2049
		2050	-----BEGIN RSA PRIVATE KEY-----
		2051	...header data
		2052	... lots of base64'y-stuff
		2053	-----END RSA PRIVATE KEY-----
		2054
		2055	-----BEGIN CERTIFICATE-----
		2056	... lots of base64'y-stuff
		2057	-----END CERTIFICATE-----
		2058
		2059	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2060	specify this file as C<cert_file>:
		2061
		2062	tcp_server undef, $port, sub {
		2063	my ($fh) = @_;
		2064
		2065	my $handle = new AnyEvent::Handle
		2066	fh => $fh,
		2067	tls => "accept",
		2068	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2069	...
		2070
		2071	When you have intermediate CA certificates that your clients might not
		2072	know about, just append them to the C<cert_file>.
		2073
1629	=back	2074	=back
1630		2075
1631		2076
1632	=head1 SUBCLASSING AnyEvent::Handle	2077	=head1 SUBCLASSING AnyEvent::Handle
1633		2078

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines