ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.117 by root, Tue Feb 10 14:22:59 2009 UTC vs.
Revision 1.197 by root, Tue Aug 31 00:59:55 2010 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.331;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
		15	my ($hdl, $fatal, $msg) = @_;
		16	warn "got error $msg\n";
		17	$hdl->destroy;
32	$cv->send;	18	$cv->send;
33	},
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes or other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
58	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
60		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
64	=head1 METHODS	80	=head1 METHODS
65		81
66	=over 4	82	=over 4
67		83
68	=item B<new (%args)>	84	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
69		85
70	The constructor supports these arguments (all as key => value pairs).	86	The constructor supports these arguments (all as C<< key => value >> pairs).
71		87
72	=over 4	88	=over 4
73		89
74	=item fh => $filehandle [MANDATORY]	90	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
75		91
76	The filehandle this L<AnyEvent::Handle> object will operate on.	92	The filehandle this L<AnyEvent::Handle> object will operate on.
77
78	NOTE: The filehandle will be set to non-blocking mode (using	93	NOTE: The filehandle will be set to non-blocking mode (using
79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	94	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
80	that mode.	95	that mode.
81		96
		97	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		98
		99	Try to connect to the specified host and service (port), using
		100	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		101	default C<peername>.
		102
		103	You have to specify either this parameter, or C<fh>, above.
		104
		105	It is possible to push requests on the read and write queues, and modify
		106	properties of the stream, even while AnyEvent::Handle is connecting.
		107
		108	When this parameter is specified, then the C<on_prepare>,
		109	C<on_connect_error> and C<on_connect> callbacks will be called under the
		110	appropriate circumstances:
		111
		112	=over 4
		113
		114	=item on_prepare => $cb->($handle)
		115
		116	This (rarely used) callback is called before a new connection is
		117	attempted, but after the file handle has been created. It could be used to
		118	prepare the file handle with parameters required for the actual connect
		119	(as opposed to settings that can be changed when the connection is already
		120	established).
		121
		122	The return value of this callback should be the connect timeout value in
		123	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
		124	timeout is to be used).
		125
		126	=item on_connect => $cb->($handle, $host, $port, $retry->())
		127
		128	This callback is called when a connection has been successfully established.
		129
		130	The actual numeric host and port (the socket peername) are passed as
		131	parameters, together with a retry callback.
		132
		133	When, for some reason, the handle is not acceptable, then calling
		134	C<$retry> will continue with the next connection target (in case of
		135	multi-homed hosts or SRV records there can be multiple connection
		136	endpoints). At the time it is called the read and write queues, eof
		137	status, tls status and similar properties of the handle will have been
		138	reset.
		139
		140	In most cases, ignoring the C<$retry> parameter is the way to go.
		141
		142	=item on_connect_error => $cb->($handle, $message)
		143
		144	This callback is called when the connection could not be
		145	established. C<$!> will contain the relevant error code, and C<$message> a
		146	message describing it (usually the same as C<"$!">).
		147
		148	If this callback isn't specified, then C<on_error> will be called with a
		149	fatal error instead.
		150
		151	=back
		152
		153	=item on_error => $cb->($handle, $fatal, $message)
		154
		155	This is the error callback, which is called when, well, some error
		156	occured, such as not being able to resolve the hostname, failure to
		157	connect or a read error.
		158
		159	Some errors are fatal (which is indicated by C<$fatal> being true). On
		160	fatal errors the handle object will be destroyed (by a call to C<< ->
		161	destroy >>) after invoking the error callback (which means you are free to
		162	examine the handle object). Examples of fatal errors are an EOF condition
		163	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		164	cases where the other side can close the connection at their will it is
		165	often easiest to not report C<EPIPE> errors in this callback.
		166
		167	AnyEvent::Handle tries to find an appropriate error code for you to check
		168	against, but in some cases (TLS errors), this does not work well. It is
		169	recommended to always output the C<$message> argument in human-readable
		170	error messages (it's usually the same as C<"$!">).
		171
		172	Non-fatal errors can be retried by simply returning, but it is recommended
		173	to simply ignore this parameter and instead abondon the handle object
		174	when this callback is invoked. Examples of non-fatal errors are timeouts
		175	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
		176
		177	On callback entrance, the value of C<$!> contains the operating system
		178	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		179	C<EPROTO>).
		180
		181	While not mandatory, it is I<highly> recommended to set this callback, as
		182	you will not be notified of errors otherwise. The default simply calls
		183	C<croak>.
		184
		185	=item on_read => $cb->($handle)
		186
		187	This sets the default read callback, which is called when data arrives
		188	and no read request is in the queue (unlike read queue callbacks, this
		189	callback will only be called when at least one octet of data is in the
		190	read buffer).
		191
		192	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
		193	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		194	must not enlarge or modify the read buffer, you can only remove data at
		195	the beginning from it.
		196
		197	You can also call C<< ->push_read (...) >> or any other function that
		198	modifies the read queue. Or do both. Or ...
		199
		200	When an EOF condition is detected then AnyEvent::Handle will first try to
		201	feed all the remaining data to the queued callbacks and C<on_read> before
		202	calling the C<on_eof> callback. If no progress can be made, then a fatal
		203	error will be raised (with C<$!> set to C<EPIPE>).
		204
		205	Note that, unlike requests in the read queue, an C<on_read> callback
		206	doesn't mean you I<require> some data: if there is an EOF and there
		207	are outstanding read requests then an error will be flagged. With an
		208	C<on_read> callback, the C<on_eof> callback will be invoked.
		209
82	=item on_eof => $cb->($handle)	210	=item on_eof => $cb->($handle)
83		211
84	Set the callback to be called when an end-of-file condition is detected,	212	Set the callback to be called when an end-of-file condition is detected,
85	i.e. in the case of a socket, when the other side has closed the	213	i.e. in the case of a socket, when the other side has closed the
86	connection cleanly.	214	connection cleanly, and there are no outstanding read requests in the
		215	queue (if there are read requests, then an EOF counts as an unexpected
		216	connection close and will be flagged as an error).
87		217
88	For sockets, this just means that the other side has stopped sending data,	218	For sockets, this just means that the other side has stopped sending data,
89	you can still try to write data, and, in fact, one can return from the EOF	219	you can still try to write data, and, in fact, one can return from the EOF
90	callback and continue writing data, as only the read part has been shut	220	callback and continue writing data, as only the read part has been shut
91	down.	221	down.
92		222
93	While not mandatory, it is I<highly> recommended to set an EOF callback,
94	otherwise you might end up with a closed socket while you are still
95	waiting for data.
96
97	If an EOF condition has been detected but no C<on_eof> callback has been	223	If an EOF condition has been detected but no C<on_eof> callback has been
98	set, then a fatal error will be raised with C<$!> set to <0>.	224	set, then a fatal error will be raised with C<$!> set to <0>.
99
100	=item on_error => $cb->($handle, $fatal)
101
102	This is the error callback, which is called when, well, some error
103	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.
105
106	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable
108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
109	errors are an EOF condition with active (but unsatisifable) read watchers
110	(C<EPIPE>) or I/O errors.
111
112	Non-fatal errors can be retried by simply returning, but it is recommended
113	to simply ignore this parameter and instead abondon the handle object
114	when this callback is invoked. Examples of non-fatal errors are timeouts
115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
116
117	On callback entrance, the value of C<$!> contains the operating system
118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
119
120	While not mandatory, it is I<highly> recommended to set this callback, as
121	you will not be notified of errors otherwise. The default simply calls
122	C<croak>.
123
124	=item on_read => $cb->($handle)
125
126	This sets the default read callback, which is called when data arrives
127	and no read request is in the queue (unlike read queue callbacks, this
128	callback will only be called when at least one octet of data is in the
129	read buffer).
130
131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
132	method or access the C<$handle->{rbuf}> member directly. Note that you
133	must not enlarge or modify the read buffer, you can only remove data at
134	the beginning from it.
135
136	When an EOF condition is detected then AnyEvent::Handle will first try to
137	feed all the remaining data to the queued callbacks and C<on_read> before
138	calling the C<on_eof> callback. If no progress can be made, then a fatal
139	error will be raised (with C<$!> set to C<EPIPE>).
140		225
141	=item on_drain => $cb->($handle)	226	=item on_drain => $cb->($handle)
142		227
143	This sets the callback that is called when the write buffer becomes empty	228	This sets the callback that is called when the write buffer becomes empty
144	(or when the callback is set and the buffer is empty already).	229	(or when the callback is set and the buffer is empty already).
…		…
151	memory and push it into the queue, but instead only read more data from	236	memory and push it into the queue, but instead only read more data from
152	the file when the write queue becomes empty.	237	the file when the write queue becomes empty.
153		238
154	=item timeout => $fractional_seconds	239	=item timeout => $fractional_seconds
155		240
		241	=item rtimeout => $fractional_seconds
		242
		243	=item wtimeout => $fractional_seconds
		244
156	If non-zero, then this enables an "inactivity" timeout: whenever this many	245	If non-zero, then these enables an "inactivity" timeout: whenever this
157	seconds pass without a successful read or write on the underlying file	246	many seconds pass without a successful read or write on the underlying
158	handle, the C<on_timeout> callback will be invoked (and if that one is	247	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
159	missing, a non-fatal C<ETIMEDOUT> error will be raised).	248	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		249	error will be raised).
		250
		251	There are three variants of the timeouts that work fully independent
		252	of each other, for both read and write, just read, and just write:
		253	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		254	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		255	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
160		256
161	Note that timeout processing is also active when you currently do not have	257	Note that timeout processing is also active when you currently do not have
162	any outstanding read or write requests: If you plan to keep the connection	258	any outstanding read or write requests: If you plan to keep the connection
163	idle then you should disable the timout temporarily or ignore the timeout	259	idle then you should disable the timout temporarily or ignore the timeout
164	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	260	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
…		…
208	accomplishd by setting this option to a true value.	304	accomplishd by setting this option to a true value.
209		305
210	The default is your opertaing system's default behaviour (most likely	306	The default is your opertaing system's default behaviour (most likely
211	enabled), this option explicitly enables or disables it, if possible.	307	enabled), this option explicitly enables or disables it, if possible.
212		308
		309	=item keepalive => <boolean>
		310
		311	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		312	normally, TCP connections have no time-out once established, so TCP
		313	connections, once established, can stay alive forever even when the other
		314	side has long gone. TCP keepalives are a cheap way to take down long-lived
		315	TCP connections whent he other side becomes unreachable. While the default
		316	is OS-dependent, TCP keepalives usually kick in after around two hours,
		317	and, if the other side doesn't reply, take down the TCP connection some 10
		318	to 15 minutes later.
		319
		320	It is harmless to specify this option for file handles that do not support
		321	keepalives, and enabling it on connections that are potentially long-lived
		322	is usually a good idea.
		323
		324	=item oobinline => <boolean>
		325
		326	BSD majorly fucked up the implementation of TCP urgent data. The result
		327	is that almost no OS implements TCP according to the specs, and every OS
		328	implements it slightly differently.
		329
		330	If you want to handle TCP urgent data, then setting this flag (the default
		331	is enabled) gives you the most portable way of getting urgent data, by
		332	putting it into the stream.
		333
		334	Since BSD emulation of OOB data on top of TCP's urgent data can have
		335	security implications, AnyEvent::Handle sets this flag automatically
		336	unless explicitly specified. Note that setting this flag after
		337	establishing a connection I<may> be a bit too late (data loss could
		338	already have occured on BSD systems), but at least it will protect you
		339	from most attacks.
		340
213	=item read_size => <bytes>	341	=item read_size => <bytes>
214		342
215	The default read block size (the amount of bytes this module will	343	The default read block size (the amount of bytes this module will
216	try to read during each loop iteration, which affects memory	344	try to read during each loop iteration, which affects memory
217	requirements). Default: C<8192>.	345	requirements). Default: C<8192>.
…		…
237		365
238	This will not work for partial TLS data that could not be encoded	366	This will not work for partial TLS data that could not be encoded
239	yet. This data will be lost. Calling the C<stoptls> method in time might	367	yet. This data will be lost. Calling the C<stoptls> method in time might
240	help.	368	help.
241		369
		370	=item peername => $string
		371
		372	A string used to identify the remote site - usually the DNS hostname
		373	(I<not> IDN!) used to create the connection, rarely the IP address.
		374
		375	Apart from being useful in error messages, this string is also used in TLS
		376	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		377	verification will be skipped when C<peername> is not specified or
		378	C<undef>.
		379
242	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	380	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
243		381
244	When this parameter is given, it enables TLS (SSL) mode, that means	382	When this parameter is given, it enables TLS (SSL) mode, that means
245	AnyEvent will start a TLS handshake as soon as the conenction has been	383	AnyEvent will start a TLS handshake as soon as the connection has been
246	established and will transparently encrypt/decrypt data afterwards.	384	established and will transparently encrypt/decrypt data afterwards.
		385
		386	All TLS protocol errors will be signalled as C<EPROTO>, with an
		387	appropriate error message.
247		388
248	TLS mode requires Net::SSLeay to be installed (it will be loaded	389	TLS mode requires Net::SSLeay to be installed (it will be loaded
249	automatically when you try to create a TLS handle): this module doesn't	390	automatically when you try to create a TLS handle): this module doesn't
250	have a dependency on that module, so if your module requires it, you have	391	have a dependency on that module, so if your module requires it, you have
251	to add the dependency yourself.	392	to add the dependency yourself.
…		…
255	mode.	396	mode.
256		397
257	You can also provide your own TLS connection object, but you have	398	You can also provide your own TLS connection object, but you have
258	to make sure that you call either C<Net::SSLeay::set_connect_state>	399	to make sure that you call either C<Net::SSLeay::set_connect_state>
259	or C<Net::SSLeay::set_accept_state> on it before you pass it to	400	or C<Net::SSLeay::set_accept_state> on it before you pass it to
260	AnyEvent::Handle.	401	AnyEvent::Handle. Also, this module will take ownership of this connection
		402	object.
		403
		404	At some future point, AnyEvent::Handle might switch to another TLS
		405	implementation, then the option to use your own session object will go
		406	away.
261		407
262	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,	408	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
263	passing in the wrong integer will lead to certain crash. This most often	409	passing in the wrong integer will lead to certain crash. This most often
264	happens when one uses a stylish C<< tls => 1 >> and is surprised about the	410	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
265	segmentation fault.	411	segmentation fault.
266		412
267	See the C<< ->starttls >> method for when need to start TLS negotiation later.	413	See the C<< ->starttls >> method for when need to start TLS negotiation later.
268		414
269	=item tls_ctx => $ssl_ctx	415	=item tls_ctx => $anyevent_tls
270		416
271	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection	417	Use the given C<AnyEvent::TLS> object to create the new TLS connection
272	(unless a connection object was specified directly). If this parameter is	418	(unless a connection object was specified directly). If this parameter is
273	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	419	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
		420
		421	Instead of an object, you can also specify a hash reference with C<< key
		422	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		423	new TLS context object.
		424
		425	=item on_starttls => $cb->($handle, $success[, $error_message])
		426
		427	This callback will be invoked when the TLS/SSL handshake has finished. If
		428	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		429	(C<on_stoptls> will not be called in this case).
		430
		431	The session in C<< $handle->{tls} >> can still be examined in this
		432	callback, even when the handshake was not successful.
		433
		434	TLS handshake failures will not cause C<on_error> to be invoked when this
		435	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		436
		437	Without this callback, handshake failures lead to C<on_error> being
		438	called, as normal.
		439
		440	Note that you cannot call C<starttls> right again in this callback. If you
		441	need to do that, start an zero-second timer instead whose callback can
		442	then call C<< ->starttls >> again.
		443
		444	=item on_stoptls => $cb->($handle)
		445
		446	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		447	set, then it will be invoked after freeing the TLS session. If it is not,
		448	then a TLS shutdown condition will be treated like a normal EOF condition
		449	on the handle.
		450
		451	The session in C<< $handle->{tls} >> can still be examined in this
		452	callback.
		453
		454	This callback will only be called on TLS shutdowns, not when the
		455	underlying handle signals EOF.
274		456
275	=item json => JSON or JSON::XS object	457	=item json => JSON or JSON::XS object
276		458
277	This is the json coder object used by the C<json> read and write types.	459	This is the json coder object used by the C<json> read and write types.
278		460
…		…
287		469
288	=cut	470	=cut
289		471
290	sub new {	472	sub new {
291	my $class = shift;	473	my $class = shift;
292
293	my $self = bless { @_ }, $class;	474	my $self = bless { @_ }, $class;
294		475
295	$self->{fh} or Carp::croak "mandatory argument fh is missing";	476	if ($self->{fh}) {
		477	$self->_start;
		478	return unless $self->{fh}; # could be gone by now
		479
		480	} elsif ($self->{connect}) {
		481	require AnyEvent::Socket;
		482
		483	$self->{peername} = $self->{connect}[0]
		484	unless exists $self->{peername};
		485
		486	$self->{_skip_drain_rbuf} = 1;
		487
		488	{
		489	Scalar::Util::weaken (my $self = $self);
		490
		491	$self->{_connect} =
		492	AnyEvent::Socket::tcp_connect (
		493	$self->{connect}[0],
		494	$self->{connect}[1],
		495	sub {
		496	my ($fh, $host, $port, $retry) = @_;
		497
		498	if ($fh) {
		499	$self->{fh} = $fh;
		500
		501	delete $self->{_skip_drain_rbuf};
		502	$self->_start;
		503
		504	$self->{on_connect}
		505	and $self->{on_connect}($self, $host, $port, sub {
		506	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		507	$self->{_skip_drain_rbuf} = 1;
		508	&$retry;
		509	});
		510
		511	} else {
		512	if ($self->{on_connect_error}) {
		513	$self->{on_connect_error}($self, "$!");
		514	$self->destroy;
		515	} else {
		516	$self->_error ($!, 1);
		517	}
		518	}
		519	},
		520	sub {
		521	local $self->{fh} = $_[0];
		522
		523	$self->{on_prepare}
		524	? $self->{on_prepare}->($self)
		525	: ()
		526	}
		527	);
		528	}
		529
		530	} else {
		531	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		532	}
		533
		534	$self
		535	}
		536
		537	sub _start {
		538	my ($self) = @_;
		539
		540	# too many clueless people try to use udp and similar sockets
		541	# with AnyEvent::Handle, do them a favour.
		542	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		543	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		544	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
296		545
297	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	546	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
298		547
		548	$self->{_activity} =
		549	$self->{_ractivity} =
		550	$self->{_wactivity} = AE::now;
		551
		552	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		553	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		554	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		555
		556	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		557	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		558
		559	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		560
299	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})	561	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
300	if $self->{tls};	562	if $self->{tls};
301		563
302	$self->{_activity} = AnyEvent->now;
303	$self->_timeout;
304
305	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	564	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
306	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
307		565
308	$self->start_read	566	$self->start_read
309	if $self->{on_read};	567	if $self->{on_read} || @{ $self->{_queue} };
310		568
311	$self	569	$self->_drain_wbuf;
312	}
313
314	sub _shutdown {
315	my ($self) = @_;
316
317	delete $self->{_tw};
318	delete $self->{_rw};
319	delete $self->{_ww};
320	delete $self->{fh};
321
322	&_freetls;
323
324	delete $self->{on_read};
325	delete $self->{_queue};
326	}	570	}
327		571
328	sub _error {	572	sub _error {
329	my ($self, $errno, $fatal) = @_;	573	my ($self, $errno, $fatal, $message) = @_;
330
331	$self->_shutdown
332	if $fatal;
333		574
334	$! = $errno;	575	$! = $errno;
		576	$message ||= "$!";
335		577
336	if ($self->{on_error}) {	578	if ($self->{on_error}) {
337	$self->{on_error}($self, $fatal);	579	$self->{on_error}($self, $fatal, $message);
338	} elsif ($self->{fh}) {	580	$self->destroy if $fatal;
		581	} elsif ($self->{fh} || $self->{connect}) {
		582	$self->destroy;
339	Carp::croak "AnyEvent::Handle uncaught error: $!";	583	Carp::croak "AnyEvent::Handle uncaught error: $message";
340	}	584	}
341	}	585	}
342		586
343	=item $fh = $handle->fh	587	=item $fh = $handle->fh
344		588
…		…
368	$_[0]{on_eof} = $_[1];	612	$_[0]{on_eof} = $_[1];
369	}	613	}
370		614
371	=item $handle->on_timeout ($cb)	615	=item $handle->on_timeout ($cb)
372		616
373	Replace the current C<on_timeout> callback, or disables the callback (but	617	=item $handle->on_rtimeout ($cb)
374	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
375	argument and method.
376		618
377	=cut	619	=item $handle->on_wtimeout ($cb)
378		620
379	sub on_timeout {	621	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
380	$_[0]{on_timeout} = $_[1];	622	callback, or disables the callback (but not the timeout) if C<$cb> =
381	}	623	C<undef>. See the C<timeout> constructor argument and method.
		624
		625	=cut
		626
		627	# see below
382		628
383	=item $handle->autocork ($boolean)	629	=item $handle->autocork ($boolean)
384		630
385	Enables or disables the current autocork behaviour (see C<autocork>	631	Enables or disables the current autocork behaviour (see C<autocork>
386	constructor argument). Changes will only take effect on the next write.	632	constructor argument). Changes will only take effect on the next write.
…		…
401	sub no_delay {	647	sub no_delay {
402	$_[0]{no_delay} = $_[1];	648	$_[0]{no_delay} = $_[1];
403		649
404	eval {	650	eval {
405	local $SIG{__DIE__};	651	local $SIG{__DIE__};
406	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	652	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		653	if $_[0]{fh};
407	};	654	};
408	}	655	}
409		656
		657	=item $handle->keepalive ($boolean)
		658
		659	Enables or disables the C<keepalive> setting (see constructor argument of
		660	the same name for details).
		661
		662	=cut
		663
		664	sub keepalive {
		665	$_[0]{keepalive} = $_[1];
		666
		667	eval {
		668	local $SIG{__DIE__};
		669	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		670	if $_[0]{fh};
		671	};
		672	}
		673
		674	=item $handle->oobinline ($boolean)
		675
		676	Enables or disables the C<oobinline> setting (see constructor argument of
		677	the same name for details).
		678
		679	=cut
		680
		681	sub oobinline {
		682	$_[0]{oobinline} = $_[1];
		683
		684	eval {
		685	local $SIG{__DIE__};
		686	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		687	if $_[0]{fh};
		688	};
		689	}
		690
		691	=item $handle->keepalive ($boolean)
		692
		693	Enables or disables the C<keepalive> setting (see constructor argument of
		694	the same name for details).
		695
		696	=cut
		697
		698	sub keepalive {
		699	$_[0]{keepalive} = $_[1];
		700
		701	eval {
		702	local $SIG{__DIE__};
		703	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		704	if $_[0]{fh};
		705	};
		706	}
		707
		708	=item $handle->on_starttls ($cb)
		709
		710	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		711
		712	=cut
		713
		714	sub on_starttls {
		715	$_[0]{on_starttls} = $_[1];
		716	}
		717
		718	=item $handle->on_stoptls ($cb)
		719
		720	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		721
		722	=cut
		723
		724	sub on_stoptls {
		725	$_[0]{on_stoptls} = $_[1];
		726	}
		727
		728	=item $handle->rbuf_max ($max_octets)
		729
		730	Configures the C<rbuf_max> setting (C<undef> disables it).
		731
		732	=cut
		733
		734	sub rbuf_max {
		735	$_[0]{rbuf_max} = $_[1];
		736	}
		737
410	#############################################################################	738	#############################################################################
411		739
412	=item $handle->timeout ($seconds)	740	=item $handle->timeout ($seconds)
413		741
		742	=item $handle->rtimeout ($seconds)
		743
		744	=item $handle->wtimeout ($seconds)
		745
414	Configures (or disables) the inactivity timeout.	746	Configures (or disables) the inactivity timeout.
415		747
416	=cut	748	=item $handle->timeout_reset
417		749
418	sub timeout {	750	=item $handle->rtimeout_reset
		751
		752	=item $handle->wtimeout_reset
		753
		754	Reset the activity timeout, as if data was received or sent.
		755
		756	These methods are cheap to call.
		757
		758	=cut
		759
		760	for my $dir ("", "r", "w") {
		761	my $timeout = "${dir}timeout";
		762	my $tw = "_${dir}tw";
		763	my $on_timeout = "on_${dir}timeout";
		764	my $activity = "_${dir}activity";
		765	my $cb;
		766
		767	*$on_timeout = sub {
		768	$_[0]{$on_timeout} = $_[1];
		769	};
		770
		771	*$timeout = sub {
419	my ($self, $timeout) = @_;	772	my ($self, $new_value) = @_;
420		773
421	$self->{timeout} = $timeout;	774	$self->{$timeout} = $new_value;
422	$self->_timeout;	775	delete $self->{$tw}; &$cb;
423	}	776	};
424		777
		778	*{"${dir}timeout_reset"} = sub {
		779	$_[0]{$activity} = AE::now;
		780	};
		781
		782	# main workhorse:
425	# reset the timeout watcher, as neccessary	783	# reset the timeout watcher, as neccessary
426	# also check for time-outs	784	# also check for time-outs
427	sub _timeout {	785	$cb = sub {
428	my ($self) = @_;	786	my ($self) = @_;
429		787
430	if ($self->{timeout}) {	788	if ($self->{$timeout} && $self->{fh}) {
431	my $NOW = AnyEvent->now;	789	my $NOW = AE::now;
432		790
433	# when would the timeout trigger?	791	# when would the timeout trigger?
434	my $after = $self->{_activity} + $self->{timeout} - $NOW;	792	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
435		793
436	# now or in the past already?	794	# now or in the past already?
437	if ($after <= 0) {	795	if ($after <= 0) {
438	$self->{_activity} = $NOW;	796	$self->{$activity} = $NOW;
439		797
440	if ($self->{on_timeout}) {	798	if ($self->{$on_timeout}) {
441	$self->{on_timeout}($self);	799	$self->{$on_timeout}($self);
442	} else {	800	} else {
443	$self->_error (&Errno::ETIMEDOUT);	801	$self->_error (Errno::ETIMEDOUT);
		802	}
		803
		804	# callback could have changed timeout value, optimise
		805	return unless $self->{$timeout};
		806
		807	# calculate new after
		808	$after = $self->{$timeout};
444	}	809	}
445		810
446	# callback could have changed timeout value, optimise	811	Scalar::Util::weaken $self;
447	return unless $self->{timeout};	812	return unless $self; # ->error could have destroyed $self
448		813
449	# calculate new after	814	$self->{$tw} ||= AE::timer $after, 0, sub {
450	$after = $self->{timeout};	815	delete $self->{$tw};
		816	$cb->($self);
		817	};
		818	} else {
		819	delete $self->{$tw};
451	}	820	}
452
453	Scalar::Util::weaken $self;
454	return unless $self; # ->error could have destroyed $self
455
456	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
457	delete $self->{_tw};
458	$self->_timeout;
459	});
460	} else {
461	delete $self->{_tw};
462	}	821	}
463	}	822	}
464		823
465	#############################################################################	824	#############################################################################
466		825
…		…
481		840
482	=item $handle->on_drain ($cb)	841	=item $handle->on_drain ($cb)
483		842
484	Sets the C<on_drain> callback or clears it (see the description of	843	Sets the C<on_drain> callback or clears it (see the description of
485	C<on_drain> in the constructor).	844	C<on_drain> in the constructor).
		845
		846	This method may invoke callbacks (and therefore the handle might be
		847	destroyed after it returns).
486		848
487	=cut	849	=cut
488		850
489	sub on_drain {	851	sub on_drain {
490	my ($self, $cb) = @_;	852	my ($self, $cb) = @_;
…		…
499		861
500	Queues the given scalar to be written. You can push as much data as you	862	Queues the given scalar to be written. You can push as much data as you
501	want (only limited by the available memory), as C<AnyEvent::Handle>	863	want (only limited by the available memory), as C<AnyEvent::Handle>
502	buffers it independently of the kernel.	864	buffers it independently of the kernel.
503		865
		866	This method may invoke callbacks (and therefore the handle might be
		867	destroyed after it returns).
		868
504	=cut	869	=cut
505		870
506	sub _drain_wbuf {	871	sub _drain_wbuf {
507	my ($self) = @_;	872	my ($self) = @_;
508		873
…		…
511	Scalar::Util::weaken $self;	876	Scalar::Util::weaken $self;
512		877
513	my $cb = sub {	878	my $cb = sub {
514	my $len = syswrite $self->{fh}, $self->{wbuf};	879	my $len = syswrite $self->{fh}, $self->{wbuf};
515		880
516	if ($len >= 0) {	881	if (defined $len) {
517	substr $self->{wbuf}, 0, $len, "";	882	substr $self->{wbuf}, 0, $len, "";
518		883
519	$self->{_activity} = AnyEvent->now;	884	$self->{_activity} = $self->{_wactivity} = AE::now;
520		885
521	$self->{on_drain}($self)	886	$self->{on_drain}($self)
522	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})	887	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
523	&& $self->{on_drain};	888	&& $self->{on_drain};
524		889
…		…
530		895
531	# try to write data immediately	896	# try to write data immediately
532	$cb->() unless $self->{autocork};	897	$cb->() unless $self->{autocork};
533		898
534	# if still data left in wbuf, we need to poll	899	# if still data left in wbuf, we need to poll
535	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	900	$self->{_ww} = AE::io $self->{fh}, 1, $cb
536	if length $self->{wbuf};	901	if length $self->{wbuf};
537	};	902	};
538	}	903	}
539		904
540	our %WH;	905	our %WH;
541		906
		907	# deprecated
542	sub register_write_type($$) {	908	sub register_write_type($$) {
543	$WH{$_[0]} = $_[1];	909	$WH{$_[0]} = $_[1];
544	}	910	}
545		911
546	sub push_write {	912	sub push_write {
547	my $self = shift;	913	my $self = shift;
548		914
549	if (@_ > 1) {	915	if (@_ > 1) {
550	my $type = shift;	916	my $type = shift;
551		917
		918	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
552	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	919	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
553	->($self, @_);	920	->($self, @_);
554	}	921	}
555		922
		923	# we downgrade here to avoid hard-to-track-down bugs,
		924	# and diagnose the problem earlier and better.
		925
556	if ($self->{tls}) {	926	if ($self->{tls}) {
557	$self->{_tls_wbuf} .= $_[0];	927	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
558		928	&_dotls ($self) if $self->{fh};
559	&_dotls ($self);
560	} else {	929	} else {
561	$self->{wbuf} .= $_[0];	930	utf8::downgrade $self->{wbuf} .= $_[0];
562	$self->_drain_wbuf;	931	$self->_drain_wbuf if $self->{fh};
563	}	932	}
564	}	933	}
565		934
566	=item $handle->push_write (type => @args)	935	=item $handle->push_write (type => @args)
567		936
568	Instead of formatting your data yourself, you can also let this module do	937	Instead of formatting your data yourself, you can also let this module
569	the job by specifying a type and type-specific arguments.	938	do the job by specifying a type and type-specific arguments. You
		939	can also specify the (fully qualified) name of a package, in which
		940	case AnyEvent tries to load the package and then expects to find the
		941	C<anyevent_write_type> function inside (see "custom write types", below).
570		942
571	Predefined types are (if you have ideas for additional types, feel free to	943	Predefined types are (if you have ideas for additional types, feel free to
572	drop by and tell us):	944	drop by and tell us):
573		945
574	=over 4	946	=over 4
…		…
631	Other languages could read single lines terminated by a newline and pass	1003	Other languages could read single lines terminated by a newline and pass
632	this line into their JSON decoder of choice.	1004	this line into their JSON decoder of choice.
633		1005
634	=cut	1006	=cut
635		1007
		1008	sub json_coder() {
		1009	eval { require JSON::XS; JSON::XS->new->utf8 }
		1010	|| do { require JSON; JSON->new->utf8 }
		1011	}
		1012
636	register_write_type json => sub {	1013	register_write_type json => sub {
637	my ($self, $ref) = @_;	1014	my ($self, $ref) = @_;
638		1015
639	require JSON;	1016	my $json = $self->{json} ||= json_coder;
640		1017
641	$self->{json} ? $self->{json}->encode ($ref)	1018	$json->encode ($ref)
642	: JSON::encode_json ($ref)
643	};	1019	};
644		1020
645	=item storable => $reference	1021	=item storable => $reference
646		1022
647	Freezes the given reference using L<Storable> and writes it to the	1023	Freezes the given reference using L<Storable> and writes it to the
…		…
657	pack "w/a*", Storable::nfreeze ($ref)	1033	pack "w/a*", Storable::nfreeze ($ref)
658	};	1034	};
659		1035
660	=back	1036	=back
661		1037
662	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1038	=item $handle->push_shutdown
663		1039
664	This function (not method) lets you add your own types to C<push_write>.	1040	Sometimes you know you want to close the socket after writing your data
		1041	before it was actually written. One way to do that is to replace your
		1042	C<on_drain> handler by a callback that shuts down the socket (and set
		1043	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1044	replaces the C<on_drain> callback with:
		1045
		1046	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1047
		1048	This simply shuts down the write side and signals an EOF condition to the
		1049	the peer.
		1050
		1051	You can rely on the normal read queue and C<on_eof> handling
		1052	afterwards. This is the cleanest way to close a connection.
		1053
		1054	This method may invoke callbacks (and therefore the handle might be
		1055	destroyed after it returns).
		1056
		1057	=cut
		1058
		1059	sub push_shutdown {
		1060	my ($self) = @_;
		1061
		1062	delete $self->{low_water_mark};
		1063	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1064	}
		1065
		1066	=item custom write types - Package::anyevent_write_type $handle, @args
		1067
		1068	Instead of one of the predefined types, you can also specify the name of
		1069	a package. AnyEvent will try to load the package and then expects to find
		1070	a function named C<anyevent_write_type> inside. If it isn't found, it
		1071	progressively tries to load the parent package until it either finds the
		1072	function (good) or runs out of packages (bad).
		1073
665	Whenever the given C<type> is used, C<push_write> will invoke the code	1074	Whenever the given C<type> is used, C<push_write> will the function with
666	reference with the handle object and the remaining arguments.	1075	the handle object and the remaining arguments.
667		1076
668	The code reference is supposed to return a single octet string that will	1077	The function is supposed to return a single octet string that will be
669	be appended to the write buffer.	1078	appended to the write buffer, so you cna mentally treat this function as a
		1079	"arguments to on-the-wire-format" converter.
670		1080
671	Note that this is a function, and all types registered this way will be	1081	Example: implement a custom write type C<join> that joins the remaining
672	global, so try to use unique names.	1082	arguments using the first one.
		1083
		1084	$handle->push_write (My::Type => " ", 1,2,3);
		1085
		1086	# uses the following package, which can be defined in the "My::Type" or in
		1087	# the "My" modules to be auto-loaded, or just about anywhere when the
		1088	# My::Type::anyevent_write_type is defined before invoking it.
		1089
		1090	package My::Type;
		1091
		1092	sub anyevent_write_type {
		1093	my ($handle, $delim, @args) = @_;
		1094
		1095	join $delim, @args
		1096	}
673		1097
674	=cut	1098	=cut
675		1099
676	#############################################################################	1100	#############################################################################
677		1101
…		…
686	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1110	ways, the "simple" way, using only C<on_read> and the "complex" way, using
687	a queue.	1111	a queue.
688		1112
689	In the simple case, you just install an C<on_read> callback and whenever	1113	In the simple case, you just install an C<on_read> callback and whenever
690	new data arrives, it will be called. You can then remove some data (if	1114	new data arrives, it will be called. You can then remove some data (if
691	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna	1115	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
692	leave the data there if you want to accumulate more (e.g. when only a	1116	leave the data there if you want to accumulate more (e.g. when only a
693	partial message has been received so far).	1117	partial message has been received so far), or change the read queue with
		1118	e.g. C<push_read>.
694		1119
695	In the more complex case, you want to queue multiple callbacks. In this	1120	In the more complex case, you want to queue multiple callbacks. In this
696	case, AnyEvent::Handle will call the first queued callback each time new	1121	case, AnyEvent::Handle will call the first queued callback each time new
697	data arrives (also the first time it is queued) and removes it when it has	1122	data arrives (also the first time it is queued) and removes it when it has
698	done its job (see C<push_read>, below).	1123	done its job (see C<push_read>, below).
…		…
759	=cut	1184	=cut
760		1185
761	sub _drain_rbuf {	1186	sub _drain_rbuf {
762	my ($self) = @_;	1187	my ($self) = @_;
763		1188
		1189	# avoid recursion
		1190	return if $self->{_skip_drain_rbuf};
764	local $self->{_in_drain} = 1;	1191	local $self->{_skip_drain_rbuf} = 1;
765
766	if (
767	defined $self->{rbuf_max}
768	&& $self->{rbuf_max} < length $self->{rbuf}
769	) {
770	$self->_error (&Errno::ENOSPC, 1), return;
771	}
772		1192
773	while () {	1193	while () {
774	# we need to use a separate tls read buffer, as we must not receive data while	1194	# we need to use a separate tls read buffer, as we must not receive data while
775	# we are draining the buffer, and this can only happen with TLS.	1195	# we are draining the buffer, and this can only happen with TLS.
776	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};	1196	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1197	if exists $self->{_tls_rbuf};
777		1198
778	my $len = length $self->{rbuf};	1199	my $len = length $self->{rbuf};
779		1200
780	if (my $cb = shift @{ $self->{_queue} }) {	1201	if (my $cb = shift @{ $self->{_queue} }) {
781	unless ($cb->($self)) {	1202	unless ($cb->($self)) {
782	if ($self->{_eof}) {	1203	# no progress can be made
783	# no progress can be made (not enough data and no data forthcoming)	1204	# (not enough data and no data forthcoming)
784	$self->_error (&Errno::EPIPE, 1), return;	1205	$self->_error (Errno::EPIPE, 1), return
785	}	1206	if $self->{_eof};
786		1207
787	unshift @{ $self->{_queue} }, $cb;	1208	unshift @{ $self->{_queue} }, $cb;
788	last;	1209	last;
789	}	1210	}
790	} elsif ($self->{on_read}) {	1211	} elsif ($self->{on_read}) {
…		…
797	&& !@{ $self->{_queue} } # and the queue is still empty	1218	&& !@{ $self->{_queue} } # and the queue is still empty
798	&& $self->{on_read} # but we still have on_read	1219	&& $self->{on_read} # but we still have on_read
799	) {	1220	) {
800	# no further data will arrive	1221	# no further data will arrive
801	# so no progress can be made	1222	# so no progress can be made
802	$self->_error (&Errno::EPIPE, 1), return	1223	$self->_error (Errno::EPIPE, 1), return
803	if $self->{_eof};	1224	if $self->{_eof};
804		1225
805	last; # more data might arrive	1226	last; # more data might arrive
806	}	1227	}
807	} else {	1228	} else {
…		…
810	last;	1231	last;
811	}	1232	}
812	}	1233	}
813		1234
814	if ($self->{_eof}) {	1235	if ($self->{_eof}) {
815	if ($self->{on_eof}) {	1236	$self->{on_eof}
816	$self->{on_eof}($self)	1237	? $self->{on_eof}($self)
817	} else {	1238	: $self->_error (0, 1, "Unexpected end-of-file");
818	$self->_error (0, 1);	1239
819	}	1240	return;
		1241	}
		1242
		1243	if (
		1244	defined $self->{rbuf_max}
		1245	&& $self->{rbuf_max} < length $self->{rbuf}
		1246	) {
		1247	$self->_error (Errno::ENOSPC, 1), return;
820	}	1248	}
821		1249
822	# may need to restart read watcher	1250	# may need to restart read watcher
823	unless ($self->{_rw}) {	1251	unless ($self->{_rw}) {
824	$self->start_read	1252	$self->start_read
…		…
830		1258
831	This replaces the currently set C<on_read> callback, or clears it (when	1259	This replaces the currently set C<on_read> callback, or clears it (when
832	the new callback is C<undef>). See the description of C<on_read> in the	1260	the new callback is C<undef>). See the description of C<on_read> in the
833	constructor.	1261	constructor.
834		1262
		1263	This method may invoke callbacks (and therefore the handle might be
		1264	destroyed after it returns).
		1265
835	=cut	1266	=cut
836		1267
837	sub on_read {	1268	sub on_read {
838	my ($self, $cb) = @_;	1269	my ($self, $cb) = @_;
839		1270
840	$self->{on_read} = $cb;	1271	$self->{on_read} = $cb;
841	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1272	$self->_drain_rbuf if $cb;
842	}	1273	}
843		1274
844	=item $handle->rbuf	1275	=item $handle->rbuf
845		1276
846	Returns the read buffer (as a modifiable lvalue).	1277	Returns the read buffer (as a modifiable lvalue).
…		…
878		1309
879	If enough data was available, then the callback must remove all data it is	1310	If enough data was available, then the callback must remove all data it is
880	interested in (which can be none at all) and return a true value. After returning	1311	interested in (which can be none at all) and return a true value. After returning
881	true, it will be removed from the queue.	1312	true, it will be removed from the queue.
882		1313
		1314	These methods may invoke callbacks (and therefore the handle might be
		1315	destroyed after it returns).
		1316
883	=cut	1317	=cut
884		1318
885	our %RH;	1319	our %RH;
886		1320
887	sub register_read_type($$) {	1321	sub register_read_type($$) {
…		…
893	my $cb = pop;	1327	my $cb = pop;
894		1328
895	if (@_) {	1329	if (@_) {
896	my $type = shift;	1330	my $type = shift;
897		1331
		1332	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
898	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1333	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
899	->($self, $cb, @_);	1334	->($self, $cb, @_);
900	}	1335	}
901		1336
902	push @{ $self->{_queue} }, $cb;	1337	push @{ $self->{_queue} }, $cb;
903	$self->_drain_rbuf unless $self->{_in_drain};	1338	$self->_drain_rbuf;
904	}	1339	}
905		1340
906	sub unshift_read {	1341	sub unshift_read {
907	my $self = shift;	1342	my $self = shift;
908	my $cb = pop;	1343	my $cb = pop;
…		…
912		1347
913	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1348	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
914	->($self, $cb, @_);	1349	->($self, $cb, @_);
915	}	1350	}
916		1351
917
918	unshift @{ $self->{_queue} }, $cb;	1352	unshift @{ $self->{_queue} }, $cb;
919	$self->_drain_rbuf unless $self->{_in_drain};	1353	$self->_drain_rbuf;
920	}	1354	}
921		1355
922	=item $handle->push_read (type => @args, $cb)	1356	=item $handle->push_read (type => @args, $cb)
923		1357
924	=item $handle->unshift_read (type => @args, $cb)	1358	=item $handle->unshift_read (type => @args, $cb)
925		1359
926	Instead of providing a callback that parses the data itself you can chose	1360	Instead of providing a callback that parses the data itself you can chose
927	between a number of predefined parsing formats, for chunks of data, lines	1361	between a number of predefined parsing formats, for chunks of data, lines
928	etc.	1362	etc. You can also specify the (fully qualified) name of a package, in
		1363	which case AnyEvent tries to load the package and then expects to find the
		1364	C<anyevent_read_type> function inside (see "custom read types", below).
929		1365
930	Predefined types are (if you have ideas for additional types, feel free to	1366	Predefined types are (if you have ideas for additional types, feel free to
931	drop by and tell us):	1367	drop by and tell us):
932		1368
933	=over 4	1369	=over 4
…		…
1057	return 1;	1493	return 1;
1058	}	1494	}
1059		1495
1060	# reject	1496	# reject
1061	if ($reject && $$rbuf =~ $reject) {	1497	if ($reject && $$rbuf =~ $reject) {
1062	$self->_error (&Errno::EBADMSG);	1498	$self->_error (Errno::EBADMSG);
1063	}	1499	}
1064		1500
1065	# skip	1501	# skip
1066	if ($skip && $$rbuf =~ $skip) {	1502	if ($skip && $$rbuf =~ $skip) {
1067	$data .= substr $$rbuf, 0, $+[0], "";	1503	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1083	my ($self, $cb) = @_;	1519	my ($self, $cb) = @_;
1084		1520
1085	sub {	1521	sub {
1086	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1522	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1087	if ($_[0]{rbuf} =~ /[^0-9]/) {	1523	if ($_[0]{rbuf} =~ /[^0-9]/) {
1088	$self->_error (&Errno::EBADMSG);	1524	$self->_error (Errno::EBADMSG);
1089	}	1525	}
1090	return;	1526	return;
1091	}	1527	}
1092		1528
1093	my $len = $1;	1529	my $len = $1;
…		…
1096	my $string = $_[1];	1532	my $string = $_[1];
1097	$_[0]->unshift_read (chunk => 1, sub {	1533	$_[0]->unshift_read (chunk => 1, sub {
1098	if ($_[1] eq ",") {	1534	if ($_[1] eq ",") {
1099	$cb->($_[0], $string);	1535	$cb->($_[0], $string);
1100	} else {	1536	} else {
1101	$self->_error (&Errno::EBADMSG);	1537	$self->_error (Errno::EBADMSG);
1102	}	1538	}
1103	});	1539	});
1104	});	1540	});
1105		1541
1106	1	1542	1
…		…
1173	=cut	1609	=cut
1174		1610
1175	register_read_type json => sub {	1611	register_read_type json => sub {
1176	my ($self, $cb) = @_;	1612	my ($self, $cb) = @_;
1177		1613
1178	require JSON;	1614	my $json = $self->{json} ||= json_coder;
1179		1615
1180	my $data;	1616	my $data;
1181	my $rbuf = \$self->{rbuf};	1617	my $rbuf = \$self->{rbuf};
1182
1183	my $json = $self->{json} ||= JSON->new->utf8;
1184		1618
1185	sub {	1619	sub {
1186	my $ref = eval { $json->incr_parse ($self->{rbuf}) };	1620	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1187		1621
1188	if ($ref) {	1622	if ($ref) {
…		…
1196	$json->incr_skip;	1630	$json->incr_skip;
1197		1631
1198	$self->{rbuf} = $json->incr_text;	1632	$self->{rbuf} = $json->incr_text;
1199	$json->incr_text = "";	1633	$json->incr_text = "";
1200		1634
1201	$self->_error (&Errno::EBADMSG);	1635	$self->_error (Errno::EBADMSG);
1202		1636
1203	()	1637	()
1204	} else {	1638	} else {
1205	$self->{rbuf} = "";	1639	$self->{rbuf} = "";
1206		1640
…		…
1243	# read remaining chunk	1677	# read remaining chunk
1244	$_[0]->unshift_read (chunk => $len, sub {	1678	$_[0]->unshift_read (chunk => $len, sub {
1245	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1679	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1246	$cb->($_[0], $ref);	1680	$cb->($_[0], $ref);
1247	} else {	1681	} else {
1248	$self->_error (&Errno::EBADMSG);	1682	$self->_error (Errno::EBADMSG);
1249	}	1683	}
1250	});	1684	});
1251	}	1685	}
1252		1686
1253	1	1687	1
1254	}	1688	}
1255	};	1689	};
1256		1690
1257	=back	1691	=back
1258		1692
1259	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1693	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1260		1694
1261	This function (not method) lets you add your own types to C<push_read>.	1695	Instead of one of the predefined types, you can also specify the name
		1696	of a package. AnyEvent will try to load the package and then expects to
		1697	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1698	progressively tries to load the parent package until it either finds the
		1699	function (good) or runs out of packages (bad).
1262		1700
1263	Whenever the given C<type> is used, C<push_read> will invoke the code	1701	Whenever this type is used, C<push_read> will invoke the function with the
1264	reference with the handle object, the callback and the remaining	1702	handle object, the original callback and the remaining arguments.
1265	arguments.
1266		1703
1267	The code reference is supposed to return a callback (usually a closure)	1704	The function is supposed to return a callback (usually a closure) that
1268	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1705	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1706	mentally treat the function as a "configurable read type to read callback"
		1707	converter.
1269		1708
1270	It should invoke the passed callback when it is done reading (remember to	1709	It should invoke the original callback when it is done reading (remember
1271	pass C<$handle> as first argument as all other callbacks do that).	1710	to pass C<$handle> as first argument as all other callbacks do that,
		1711	although there is no strict requirement on this).
1272		1712
1273	Note that this is a function, and all types registered this way will be
1274	global, so try to use unique names.
1275
1276	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1713	For examples, see the source of this module (F<perldoc -m
1277	search for C<register_read_type>)).	1714	AnyEvent::Handle>, search for C<register_read_type>)).
1278		1715
1279	=item $handle->stop_read	1716	=item $handle->stop_read
1280		1717
1281	=item $handle->start_read	1718	=item $handle->start_read
1282		1719
…		…
1302	}	1739	}
1303		1740
1304	sub start_read {	1741	sub start_read {
1305	my ($self) = @_;	1742	my ($self) = @_;
1306		1743
1307	unless ($self->{_rw} || $self->{_eof}) {	1744	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1308	Scalar::Util::weaken $self;	1745	Scalar::Util::weaken $self;
1309		1746
1310	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1747	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1311	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});	1748	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1312	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1749	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1313		1750
1314	if ($len > 0) {	1751	if ($len > 0) {
1315	$self->{_activity} = AnyEvent->now;	1752	$self->{_activity} = $self->{_ractivity} = AE::now;
1316		1753
1317	if ($self->{tls}) {	1754	if ($self->{tls}) {
1318	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);	1755	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1319		1756
1320	&_dotls ($self);	1757	&_dotls ($self);
1321	} else {	1758	} else {
1322	$self->_drain_rbuf unless $self->{_in_drain};	1759	$self->_drain_rbuf;
1323	}	1760	}
1324		1761
1325	} elsif (defined $len) {	1762	} elsif (defined $len) {
1326	delete $self->{_rw};	1763	delete $self->{_rw};
1327	$self->{_eof} = 1;	1764	$self->{_eof} = 1;
1328	$self->_drain_rbuf unless $self->{_in_drain};	1765	$self->_drain_rbuf;
1329		1766
1330	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1767	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1331	return $self->_error ($!, 1);	1768	return $self->_error ($!, 1);
1332	}	1769	}
1333	});	1770	};
		1771	}
		1772	}
		1773
		1774	our $ERROR_SYSCALL;
		1775	our $ERROR_WANT_READ;
		1776
		1777	sub _tls_error {
		1778	my ($self, $err) = @_;
		1779
		1780	return $self->_error ($!, 1)
		1781	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1782
		1783	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1784
		1785	# reduce error string to look less scary
		1786	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1787
		1788	if ($self->{_on_starttls}) {
		1789	(delete $self->{_on_starttls})->($self, undef, $err);
		1790	&_freetls;
		1791	} else {
		1792	&_freetls;
		1793	$self->_error (Errno::EPROTO, 1, $err);
1334	}	1794	}
1335	}	1795	}
1336		1796
1337	# poll the write BIO and send the data if applicable	1797	# poll the write BIO and send the data if applicable
		1798	# also decode read data if possible
		1799	# this is basiclaly our TLS state machine
		1800	# more efficient implementations are possible with openssl,
		1801	# but not with the buggy and incomplete Net::SSLeay.
1338	sub _dotls {	1802	sub _dotls {
1339	my ($self) = @_;	1803	my ($self) = @_;
1340		1804
1341	my $tmp;	1805	my $tmp;
1342		1806
1343	if (length $self->{_tls_wbuf}) {	1807	if (length $self->{_tls_wbuf}) {
1344	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1808	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1345	substr $self->{_tls_wbuf}, 0, $tmp, "";	1809	substr $self->{_tls_wbuf}, 0, $tmp, "";
1346	}	1810	}
		1811
		1812	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1813	return $self->_tls_error ($tmp)
		1814	if $tmp != $ERROR_WANT_READ
		1815	&& ($tmp != $ERROR_SYSCALL || $!);
1347	}	1816	}
1348		1817
1349	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {	1818	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1350	unless (length $tmp) {	1819	unless (length $tmp) {
1351	# let's treat SSL-eof as we treat normal EOF	1820	$self->{_on_starttls}
1352	delete $self->{_rw};	1821	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
1353	$self->{_eof} = 1;
1354	&_freetls;	1822	&_freetls;
		1823
		1824	if ($self->{on_stoptls}) {
		1825	$self->{on_stoptls}($self);
		1826	return;
		1827	} else {
		1828	# let's treat SSL-eof as we treat normal EOF
		1829	delete $self->{_rw};
		1830	$self->{_eof} = 1;
		1831	}
1355	}	1832	}
1356		1833
1357	$self->{_tls_rbuf} .= $tmp;	1834	$self->{_tls_rbuf} .= $tmp;
1358	$self->_drain_rbuf unless $self->{_in_drain};	1835	$self->_drain_rbuf;
1359	$self->{tls} or return; # tls session might have gone away in callback	1836	$self->{tls} or return; # tls session might have gone away in callback
1360	}	1837	}
1361		1838
1362	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);	1839	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1363
1364	if ($tmp != Net::SSLeay::ERROR_WANT_READ ()) {
1365	if ($tmp == Net::SSLeay::ERROR_SYSCALL ()) {
1366	return $self->_error ($!, 1);	1840	return $self->_tls_error ($tmp)
1367	} elsif ($tmp == Net::SSLeay::ERROR_SSL ()) {	1841	if $tmp != $ERROR_WANT_READ
1368	return $self->_error (&Errno::EIO, 1);	1842	&& ($tmp != $ERROR_SYSCALL || $!);
1369	}
1370
1371	# all other errors are fine for our purposes
1372	}
1373		1843
1374	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1844	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1375	$self->{wbuf} .= $tmp;	1845	$self->{wbuf} .= $tmp;
1376	$self->_drain_wbuf;	1846	$self->_drain_wbuf;
		1847	$self->{tls} or return; # tls session might have gone away in callback
1377	}	1848	}
		1849
		1850	$self->{_on_starttls}
		1851	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
		1852	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1378	}	1853	}
1379		1854
1380	=item $handle->starttls ($tls[, $tls_ctx])	1855	=item $handle->starttls ($tls[, $tls_ctx])
1381		1856
1382	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1857	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1383	object is created, you can also do that at a later time by calling	1858	object is created, you can also do that at a later time by calling
1384	C<starttls>.	1859	C<starttls>.
1385		1860
		1861	Starting TLS is currently an asynchronous operation - when you push some
		1862	write data and then call C<< ->starttls >> then TLS negotiation will start
		1863	immediately, after which the queued write data is then sent.
		1864
1386	The first argument is the same as the C<tls> constructor argument (either	1865	The first argument is the same as the C<tls> constructor argument (either
1387	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1866	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1388		1867
1389	The second argument is the optional C<Net::SSLeay::CTX> object that is	1868	The second argument is the optional C<AnyEvent::TLS> object that is used
1390	used when AnyEvent::Handle has to create its own TLS connection object.	1869	when AnyEvent::Handle has to create its own TLS connection object, or
		1870	a hash reference with C<< key => value >> pairs that will be used to
		1871	construct a new context.
1391		1872
1392	The TLS connection object will end up in C<< $handle->{tls} >> after this	1873	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1393	call and can be used or changed to your liking. Note that the handshake	1874	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1394	might have already started when this function returns.	1875	changed to your liking. Note that the handshake might have already started
		1876	when this function returns.
1395		1877
1396	If it an error to start a TLS handshake more than once per	1878	Due to bugs in OpenSSL, it might or might not be possible to do multiple
1397	AnyEvent::Handle object (this is due to bugs in OpenSSL).	1879	handshakes on the same stream. Best do not attempt to use the stream after
		1880	stopping TLS.
1398		1881
		1882	This method may invoke callbacks (and therefore the handle might be
		1883	destroyed after it returns).
		1884
1399	=cut	1885	=cut
		1886
		1887	our %TLS_CACHE; #TODO not yet documented, should we?
1400		1888
1401	sub starttls {	1889	sub starttls {
1402	my ($self, $ssl, $ctx) = @_;	1890	my ($self, $tls, $ctx) = @_;
		1891
		1892	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1893	if $self->{tls};
		1894
		1895	$self->{tls} = $tls;
		1896	$self->{tls_ctx} = $ctx if @_ > 2;
		1897
		1898	return unless $self->{fh};
1403		1899
1404	require Net::SSLeay;	1900	require Net::SSLeay;
1405		1901
1406	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"	1902	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1407	if $self->{tls};	1903	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1904
		1905	$tls = delete $self->{tls};
		1906	$ctx = $self->{tls_ctx};
		1907
		1908	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1909
		1910	if ("HASH" eq ref $ctx) {
		1911	require AnyEvent::TLS;
		1912
		1913	if ($ctx->{cache}) {
		1914	my $key = $ctx+0;
		1915	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1916	} else {
		1917	$ctx = new AnyEvent::TLS %$ctx;
		1918	}
		1919	}
1408		1920
1409	if ($ssl eq "accept") {	1921	$self->{tls_ctx} = $ctx || TLS_CTX ();
1410	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1922	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1411	Net::SSLeay::set_accept_state ($ssl);
1412	} elsif ($ssl eq "connect") {
1413	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());
1414	Net::SSLeay::set_connect_state ($ssl);
1415	}
1416
1417	$self->{tls} = $ssl;
1418		1923
1419	# basically, this is deep magic (because SSL_read should have the same issues)	1924	# basically, this is deep magic (because SSL_read should have the same issues)
1420	# but the openssl maintainers basically said: "trust us, it just works".	1925	# but the openssl maintainers basically said: "trust us, it just works".
1421	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1926	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1422	# and mismaintained ssleay-module doesn't even offer them).	1927	# and mismaintained ssleay-module doesn't even offer them).
…		…
1426	#	1931	#
1427	# note that we do not try to keep the length constant between writes as we are required to do.	1932	# note that we do not try to keep the length constant between writes as we are required to do.
1428	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	1933	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1429	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to	1934	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
1430	# have identity issues in that area.	1935	# have identity issues in that area.
1431	Net::SSLeay::CTX_set_mode ($self->{tls},	1936	# Net::SSLeay::CTX_set_mode ($ssl,
1432	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1937	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1433	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1938	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1939	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1434		1940
1435	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1941	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1436	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1942	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1437		1943
		1944	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1945
1438	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1946	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
		1947
		1948	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
		1949	if $self->{on_starttls};
1439		1950
1440	&_dotls; # need to trigger the initial handshake	1951	&_dotls; # need to trigger the initial handshake
1441	$self->start_read; # make sure we actually do read	1952	$self->start_read; # make sure we actually do read
1442	}	1953	}
1443		1954
1444	=item $handle->stoptls	1955	=item $handle->stoptls
1445		1956
1446	Shuts down the SSL connection - this makes a proper EOF handshake by	1957	Shuts down the SSL connection - this makes a proper EOF handshake by
1447	sending a close notify to the other side, but since OpenSSL doesn't	1958	sending a close notify to the other side, but since OpenSSL doesn't
1448	support non-blocking shut downs, it is not possible to re-use the stream	1959	support non-blocking shut downs, it is not guaranteed that you can re-use
1449	afterwards.	1960	the stream afterwards.
		1961
		1962	This method may invoke callbacks (and therefore the handle might be
		1963	destroyed after it returns).
1450		1964
1451	=cut	1965	=cut
1452		1966
1453	sub stoptls {	1967	sub stoptls {
1454	my ($self) = @_;	1968	my ($self) = @_;
1455		1969
1456	if ($self->{tls}) {	1970	if ($self->{tls} && $self->{fh}) {
1457	Net::SSLeay::shutdown ($self->{tls});	1971	Net::SSLeay::shutdown ($self->{tls});
1458		1972
1459	&_dotls;	1973	&_dotls;
1460		1974
1461	# we don't give a shit. no, we do, but we can't. no...	1975	# # we don't give a shit. no, we do, but we can't. no...#d#
1462	# we, we... have to use openssl :/	1976	# # we, we... have to use openssl :/#d#
1463	&_freetls;	1977	# &_freetls;#d#
1464	}	1978	}
1465	}	1979	}
1466		1980
1467	sub _freetls {	1981	sub _freetls {
1468	my ($self) = @_;	1982	my ($self) = @_;
1469		1983
1470	return unless $self->{tls};	1984	return unless $self->{tls};
1471		1985
1472	Net::SSLeay::free (delete $self->{tls});	1986	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1987	if $self->{tls} > 0;
1473		1988
1474	delete @$self{qw(_rbio _wbio _tls_wbuf)};	1989	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1475	}	1990	}
1476		1991
1477	sub DESTROY {	1992	sub DESTROY {
1478	my $self = shift;	1993	my ($self) = @_;
1479		1994
1480	&_freetls;	1995	&_freetls;
1481		1996
1482	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1997	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1483		1998
1484	if ($linger && length $self->{wbuf}) {	1999	if ($linger && length $self->{wbuf} && $self->{fh}) {
1485	my $fh = delete $self->{fh};	2000	my $fh = delete $self->{fh};
1486	my $wbuf = delete $self->{wbuf};	2001	my $wbuf = delete $self->{wbuf};
1487		2002
1488	my @linger;	2003	my @linger;
1489		2004
1490	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2005	push @linger, AE::io $fh, 1, sub {
1491	my $len = syswrite $fh, $wbuf, length $wbuf;	2006	my $len = syswrite $fh, $wbuf, length $wbuf;
1492		2007
1493	if ($len > 0) {	2008	if ($len > 0) {
1494	substr $wbuf, 0, $len, "";	2009	substr $wbuf, 0, $len, "";
1495	} else {	2010	} else {
1496	@linger = (); # end	2011	@linger = (); # end
1497	}	2012	}
1498	});	2013	};
1499	push @linger, AnyEvent->timer (after => $linger, cb => sub {	2014	push @linger, AE::timer $linger, 0, sub {
1500	@linger = ();	2015	@linger = ();
1501	});	2016	};
1502	}	2017	}
1503	}	2018	}
1504		2019
1505	=item $handle->destroy	2020	=item $handle->destroy
1506		2021
1507	Shuts down the handle object as much as possible - this call ensures that	2022	Shuts down the handle object as much as possible - this call ensures that
1508	no further callbacks will be invoked and resources will be freed as much	2023	no further callbacks will be invoked and as many resources as possible
1509	as possible. You must not call any methods on the object afterwards.	2024	will be freed. Any method you will call on the handle object after
		2025	destroying it in this way will be silently ignored (and it will return the
		2026	empty list).
1510		2027
1511	Normally, you can just "forget" any references to an AnyEvent::Handle	2028	Normally, you can just "forget" any references to an AnyEvent::Handle
1512	object and it will simply shut down. This works in fatal error and EOF	2029	object and it will simply shut down. This works in fatal error and EOF
1513	callbacks, as well as code outside. It does I<NOT> work in a read or write	2030	callbacks, as well as code outside. It does I<NOT> work in a read or write
1514	callback, so when you want to destroy the AnyEvent::Handle object from	2031	callback, so when you want to destroy the AnyEvent::Handle object from
1515	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in	2032	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
1516	that case.	2033	that case.
1517		2034
		2035	Destroying the handle object in this way has the advantage that callbacks
		2036	will be removed as well, so if those are the only reference holders (as
		2037	is common), then one doesn't need to do anything special to break any
		2038	reference cycles.
		2039
1518	The handle might still linger in the background and write out remaining	2040	The handle might still linger in the background and write out remaining
1519	data, as specified by the C<linger> option, however.	2041	data, as specified by the C<linger> option, however.
1520		2042
1521	=cut	2043	=cut
1522		2044
1523	sub destroy {	2045	sub destroy {
1524	my ($self) = @_;	2046	my ($self) = @_;
1525		2047
1526	$self->DESTROY;	2048	$self->DESTROY;
1527	%$self = ();	2049	%$self = ();
		2050	bless $self, "AnyEvent::Handle::destroyed";
1528	}	2051	}
		2052
		2053	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2054	#nop
		2055	}
		2056
		2057	=item $handle->destroyed
		2058
		2059	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2060	->destroy >>, true otherwise.
		2061
		2062	Can be useful to decide whether the handle is still valid after some
		2063	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2064	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2065	can destroy the handle, so work can be avoided by checking sometimes:
		2066
		2067	$hdl->starttls ("accept");
		2068	return if $hdl->destroyed;
		2069	$hdl->push_write (...
		2070
		2071	Note that the call to C<push_write> will silently be ignored if the handle
		2072	has been destroyed, so often you can just ignore the possibility of the
		2073	handle being destroyed.
		2074
		2075	=cut
		2076
		2077	sub destroyed { 0 }
		2078	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1529		2079
1530	=item AnyEvent::Handle::TLS_CTX	2080	=item AnyEvent::Handle::TLS_CTX
1531		2081
1532	This function creates and returns the Net::SSLeay::CTX object used by	2082	This function creates and returns the AnyEvent::TLS object used by default
1533	default for TLS mode.	2083	for TLS mode.
1534		2084
1535	The context is created like this:	2085	The context is created by calling L<AnyEvent::TLS> without any arguments.
1536
1537	Net::SSLeay::load_error_strings;
1538	Net::SSLeay::SSLeay_add_ssl_algorithms;
1539	Net::SSLeay::randomize;
1540
1541	my $CTX = Net::SSLeay::CTX_new;
1542
1543	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1544		2086
1545	=cut	2087	=cut
1546		2088
1547	our $TLS_CTX;	2089	our $TLS_CTX;
1548		2090
1549	sub TLS_CTX() {	2091	sub TLS_CTX() {
1550	$TLS_CTX || do {	2092	$TLS_CTX ||= do {
1551	require Net::SSLeay;	2093	require AnyEvent::TLS;
1552		2094
1553	Net::SSLeay::load_error_strings ();	2095	new AnyEvent::TLS
1554	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1555	Net::SSLeay::randomize ();
1556
1557	$TLS_CTX = Net::SSLeay::CTX_new ();
1558
1559	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1560
1561	$TLS_CTX
1562	}	2096	}
1563	}	2097	}
1564		2098
1565	=back	2099	=back
1566		2100
…		…
1605		2139
1606	$handle->on_read (sub { });	2140	$handle->on_read (sub { });
1607	$handle->on_eof (undef);	2141	$handle->on_eof (undef);
1608	$handle->on_error (sub {	2142	$handle->on_error (sub {
1609	my $data = delete $_[0]{rbuf};	2143	my $data = delete $_[0]{rbuf};
1610	undef $handle;
1611	});	2144	});
1612		2145
1613	The reason to use C<on_error> is that TCP connections, due to latencies	2146	The reason to use C<on_error> is that TCP connections, due to latencies
1614	and packets loss, might get closed quite violently with an error, when in	2147	and packets loss, might get closed quite violently with an error, when in
1615	fact, all data has been received.	2148	fact, all data has been received.
…		…
1631	$handle->on_drain (sub {	2164	$handle->on_drain (sub {
1632	warn "all data submitted to the kernel\n";	2165	warn "all data submitted to the kernel\n";
1633	undef $handle;	2166	undef $handle;
1634	});	2167	});
1635		2168
		2169	If you just want to queue some data and then signal EOF to the other side,
		2170	consider using C<< ->push_shutdown >> instead.
		2171
		2172	=item I want to contact a TLS/SSL server, I don't care about security.
		2173
		2174	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2175	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		2176	parameter:
		2177
		2178	tcp_connect $host, $port, sub {
		2179	my ($fh) = @_;
		2180
		2181	my $handle = new AnyEvent::Handle
		2182	fh => $fh,
		2183	tls => "connect",
		2184	on_error => sub { ... };
		2185
		2186	$handle->push_write (...);
		2187	};
		2188
		2189	=item I want to contact a TLS/SSL server, I do care about security.
		2190
		2191	Then you should additionally enable certificate verification, including
		2192	peername verification, if the protocol you use supports it (see
		2193	L<AnyEvent::TLS>, C<verify_peername>).
		2194
		2195	E.g. for HTTPS:
		2196
		2197	tcp_connect $host, $port, sub {
		2198	my ($fh) = @_;
		2199
		2200	my $handle = new AnyEvent::Handle
		2201	fh => $fh,
		2202	peername => $host,
		2203	tls => "connect",
		2204	tls_ctx => { verify => 1, verify_peername => "https" },
		2205	...
		2206
		2207	Note that you must specify the hostname you connected to (or whatever
		2208	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2209	peername verification will be done.
		2210
		2211	The above will use the system-dependent default set of trusted CA
		2212	certificates. If you want to check against a specific CA, add the
		2213	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2214
		2215	tls_ctx => {
		2216	verify => 1,
		2217	verify_peername => "https",
		2218	ca_file => "my-ca-cert.pem",
		2219	},
		2220
		2221	=item I want to create a TLS/SSL server, how do I do that?
		2222
		2223	Well, you first need to get a server certificate and key. You have
		2224	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2225	self-signed certificate (cheap. check the search engine of your choice,
		2226	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2227	nice program for that purpose).
		2228
		2229	Then create a file with your private key (in PEM format, see
		2230	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2231	file should then look like this:
		2232
		2233	-----BEGIN RSA PRIVATE KEY-----
		2234	...header data
		2235	... lots of base64'y-stuff
		2236	-----END RSA PRIVATE KEY-----
		2237
		2238	-----BEGIN CERTIFICATE-----
		2239	... lots of base64'y-stuff
		2240	-----END CERTIFICATE-----
		2241
		2242	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2243	specify this file as C<cert_file>:
		2244
		2245	tcp_server undef, $port, sub {
		2246	my ($fh) = @_;
		2247
		2248	my $handle = new AnyEvent::Handle
		2249	fh => $fh,
		2250	tls => "accept",
		2251	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2252	...
		2253
		2254	When you have intermediate CA certificates that your clients might not
		2255	know about, just append them to the C<cert_file>.
		2256
1636	=back	2257	=back
1637		2258
1638		2259
1639	=head1 SUBCLASSING AnyEvent::Handle	2260	=head1 SUBCLASSING AnyEvent::Handle
1640		2261

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines