[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.54 by root, Tue Jun 3 09:02:46 2008 UTC vs.
Revision 1.118 by root, Thu Feb 12 17:33:38 2009 UTC

…		…
1	package AnyEvent::Handle;	1	package AnyEvent::Handle;
2		2
3	no warnings;	3	no warnings;
4	use strict;	4	use strict qw(subs vars);
5		5
6	use AnyEvent ();	6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);	7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();	8	use Scalar::Util ();
9	use Carp ();	9	use Carp ();
14		14
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		16
17	=cut	17	=cut
18		18
19	our $VERSION = 4.12;	19	our $VERSION = 4.34;
20		20
21	=head1 SYNOPSIS	21	=head1 SYNOPSIS
22		22
23	use AnyEvent;	23	use AnyEvent;
24	use AnyEvent::Handle;	24	use AnyEvent::Handle;
…		…
27		27
28	my $handle =	28	my $handle =
29	AnyEvent::Handle->new (	29	AnyEvent::Handle->new (
30	fh => \*STDIN,	30	fh => \*STDIN,
31	on_eof => sub {	31	on_eof => sub {
32	$cv->broadcast;	32	$cv->send;
33	},	33	},
34	);	34	);
35		35
36	# send some request line	36	# send some request line
37	$handle->push_write ("getinfo\015\012");	37	$handle->push_write ("getinfo\015\012");
…		…
49		49
50	This module is a helper module to make it easier to do event-based I/O on	50	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	51	filehandles. For utility functions for doing non-blocking connects and accepts
52	on sockets see L<AnyEvent::Util>.	52	on sockets see L<AnyEvent::Util>.
53		53
		54	The L<AnyEvent::Intro> tutorial contains some well-documented
		55	AnyEvent::Handle examples.
		56
54	In the following, when the documentation refers to of "bytes" then this	57	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	58	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	59	treatment of characters applies to this module as well.
57		60
58	All callbacks will be invoked with the handle object as their first	61	All callbacks will be invoked with the handle object as their first
…		…
70		73
71	=item fh => $filehandle [MANDATORY]	74	=item fh => $filehandle [MANDATORY]
72		75
73	The filehandle this L<AnyEvent::Handle> object will operate on.	76	The filehandle this L<AnyEvent::Handle> object will operate on.
74		77
75	NOTE: The filehandle will be set to non-blocking (using	78	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		80	that mode.
77		81
78	=item on_eof => $cb->($handle)	82	=item on_eof => $cb->($handle)
79		83
80	Set the callback to be called when an end-of-file condition is detcted,	84	Set the callback to be called when an end-of-file condition is detected,
81	i.e. in the case of a socket, when the other side has closed the	85	i.e. in the case of a socket, when the other side has closed the
82	connection cleanly.	86	connection cleanly.
83		87
		88	For sockets, this just means that the other side has stopped sending data,
		89	you can still try to write data, and, in fact, one can return from the EOF
		90	callback and continue writing data, as only the read part has been shut
		91	down.
		92
84	While not mandatory, it is highly recommended to set an eof callback,	93	While not mandatory, it is I<highly> recommended to set an EOF callback,
85	otherwise you might end up with a closed socket while you are still	94	otherwise you might end up with a closed socket while you are still
86	waiting for data.	95	waiting for data.
		96
		97	If an EOF condition has been detected but no C<on_eof> callback has been
		98	set, then a fatal error will be raised with C<$!> set to <0>.
87		99
88	=item on_error => $cb->($handle, $fatal)	100	=item on_error => $cb->($handle, $fatal)
89		101
90	This is the error callback, which is called when, well, some error	102	This is the error callback, which is called when, well, some error
91	occured, such as not being able to resolve the hostname, failure to	103	occured, such as not being able to resolve the hostname, failure to
92	connect or a read error.	104	connect or a read error.
93		105
94	Some errors are fatal (which is indicated by C<$fatal> being true). On	106	Some errors are fatal (which is indicated by C<$fatal> being true). On
95	fatal errors the handle object will be shut down and will not be	107	fatal errors the handle object will be shut down and will not be usable
		108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
		109	errors are an EOF condition with active (but unsatisifable) read watchers
		110	(C<EPIPE>) or I/O errors.
		111
96	usable. Non-fatal errors can be retried by simply returning, but it is	112	Non-fatal errors can be retried by simply returning, but it is recommended
97	recommended to simply ignore this parameter and instead abondon the handle	113	to simply ignore this parameter and instead abondon the handle object
98	object when this callback is invoked.	114	when this callback is invoked. Examples of non-fatal errors are timeouts
		115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
99		116
100	On callback entrance, the value of C<$!> contains the operating system	117	On callback entrance, the value of C<$!> contains the operating system
101	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
102		119
103	While not mandatory, it is I<highly> recommended to set this callback, as	120	While not mandatory, it is I<highly> recommended to set this callback, as
…		…
105	C<croak>.	122	C<croak>.
106		123
107	=item on_read => $cb->($handle)	124	=item on_read => $cb->($handle)
108		125
109	This sets the default read callback, which is called when data arrives	126	This sets the default read callback, which is called when data arrives
110	and no read request is in the queue.	127	and no read request is in the queue (unlike read queue callbacks, this
		128	callback will only be called when at least one octet of data is in the
		129	read buffer).
111		130
112	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
113	method or access the C<$handle->{rbuf}> member directly.	132	method or access the C<$handle->{rbuf}> member directly. Note that you
		133	must not enlarge or modify the read buffer, you can only remove data at
		134	the beginning from it.
114		135
115	When an EOF condition is detected then AnyEvent::Handle will first try to	136	When an EOF condition is detected then AnyEvent::Handle will first try to
116	feed all the remaining data to the queued callbacks and C<on_read> before	137	feed all the remaining data to the queued callbacks and C<on_read> before
117	calling the C<on_eof> callback. If no progress can be made, then a fatal	138	calling the C<on_eof> callback. If no progress can be made, then a fatal
118	error will be raised (with C<$!> set to C<EPIPE>).	139	error will be raised (with C<$!> set to C<EPIPE>).
…		…
122	This sets the callback that is called when the write buffer becomes empty	143	This sets the callback that is called when the write buffer becomes empty
123	(or when the callback is set and the buffer is empty already).	144	(or when the callback is set and the buffer is empty already).
124		145
125	To append to the write buffer, use the C<< ->push_write >> method.	146	To append to the write buffer, use the C<< ->push_write >> method.
126		147
		148	This callback is useful when you don't want to put all of your write data
		149	into the queue at once, for example, when you want to write the contents
		150	of some file to the socket you might not want to read the whole file into
		151	memory and push it into the queue, but instead only read more data from
		152	the file when the write queue becomes empty.
		153
127	=item timeout => $fractional_seconds	154	=item timeout => $fractional_seconds
128		155
129	If non-zero, then this enables an "inactivity" timeout: whenever this many	156	If non-zero, then this enables an "inactivity" timeout: whenever this many
130	seconds pass without a successful read or write on the underlying file	157	seconds pass without a successful read or write on the underlying file
131	handle, the C<on_timeout> callback will be invoked (and if that one is	158	handle, the C<on_timeout> callback will be invoked (and if that one is
132	missing, an C<ETIMEDOUT> error will be raised).	159	missing, a non-fatal C<ETIMEDOUT> error will be raised).
133		160
134	Note that timeout processing is also active when you currently do not have	161	Note that timeout processing is also active when you currently do not have
135	any outstanding read or write requests: If you plan to keep the connection	162	any outstanding read or write requests: If you plan to keep the connection
136	idle then you should disable the timout temporarily or ignore the timeout	163	idle then you should disable the timout temporarily or ignore the timeout
137	in the C<on_timeout> callback.	164	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		165	restart the timeout.
138		166
139	Zero (the default) disables this timeout.	167	Zero (the default) disables this timeout.
140		168
141	=item on_timeout => $cb->($handle)	169	=item on_timeout => $cb->($handle)
142		170
…		…
146		174
147	=item rbuf_max => <bytes>	175	=item rbuf_max => <bytes>
148		176
149	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	177	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
150	when the read buffer ever (strictly) exceeds this size. This is useful to	178	when the read buffer ever (strictly) exceeds this size. This is useful to
151	avoid denial-of-service attacks.	179	avoid some forms of denial-of-service attacks.
152		180
153	For example, a server accepting connections from untrusted sources should	181	For example, a server accepting connections from untrusted sources should
154	be configured to accept only so-and-so much data that it cannot act on	182	be configured to accept only so-and-so much data that it cannot act on
155	(for example, when expecting a line, an attacker could send an unlimited	183	(for example, when expecting a line, an attacker could send an unlimited
156	amount of data without a callback ever being called as long as the line	184	amount of data without a callback ever being called as long as the line
157	isn't finished).	185	isn't finished).
158		186
		187	=item autocork => <boolean>
		188
		189	When disabled (the default), then C<push_write> will try to immediately
		190	write the data to the handle, if possible. This avoids having to register
		191	a write watcher and wait for the next event loop iteration, but can
		192	be inefficient if you write multiple small chunks (on the wire, this
		193	disadvantage is usually avoided by your kernel's nagle algorithm, see
		194	C<no_delay>, but this option can save costly syscalls).
		195
		196	When enabled, then writes will always be queued till the next event loop
		197	iteration. This is efficient when you do many small writes per iteration,
		198	but less efficient when you do a single write only per iteration (or when
		199	the write buffer often is full). It also increases write latency.
		200
		201	=item no_delay => <boolean>
		202
		203	When doing small writes on sockets, your operating system kernel might
		204	wait a bit for more data before actually sending it out. This is called
		205	the Nagle algorithm, and usually it is beneficial.
		206
		207	In some situations you want as low a delay as possible, which can be
		208	accomplishd by setting this option to a true value.
		209
		210	The default is your opertaing system's default behaviour (most likely
		211	enabled), this option explicitly enables or disables it, if possible.
		212
159	=item read_size => <bytes>	213	=item read_size => <bytes>
160		214
161	The default read block size (the amount of bytes this module will try to read	215	The default read block size (the amount of bytes this module will
162	during each (loop iteration). Default: C<8192>.	216	try to read during each loop iteration, which affects memory
		217	requirements). Default: C<8192>.
163		218
164	=item low_water_mark => <bytes>	219	=item low_water_mark => <bytes>
165		220
166	Sets the amount of bytes (default: C<0>) that make up an "empty" write	221	Sets the amount of bytes (default: C<0>) that make up an "empty" write
167	buffer: If the write reaches this size or gets even samller it is	222	buffer: If the write reaches this size or gets even samller it is
168	considered empty.	223	considered empty.
169		224
		225	Sometimes it can be beneficial (for performance reasons) to add data to
		226	the write buffer before it is fully drained, but this is a rare case, as
		227	the operating system kernel usually buffers data as well, so the default
		228	is good in almost all cases.
		229
		230	=item linger => <seconds>
		231
		232	If non-zero (default: C<3600>), then the destructor of the
		233	AnyEvent::Handle object will check whether there is still outstanding
		234	write data and will install a watcher that will write this data to the
		235	socket. No errors will be reported (this mostly matches how the operating
		236	system treats outstanding data at socket close time).
		237
		238	This will not work for partial TLS data that could not be encoded
		239	yet. This data will be lost. Calling the C<stoptls> method in time might
		240	help.
		241
170	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object	242	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
171		243
172	When this parameter is given, it enables TLS (SSL) mode, that means it	244	When this parameter is given, it enables TLS (SSL) mode, that means
173	will start making tls handshake and will transparently encrypt/decrypt	245	AnyEvent will start a TLS handshake as soon as the conenction has been
174	data.	246	established and will transparently encrypt/decrypt data afterwards.
175		247
176	TLS mode requires Net::SSLeay to be installed (it will be loaded	248	TLS mode requires Net::SSLeay to be installed (it will be loaded
177	automatically when you try to create a TLS handle).	249	automatically when you try to create a TLS handle): this module doesn't
		250	have a dependency on that module, so if your module requires it, you have
		251	to add the dependency yourself.
178		252
179	For the TLS server side, use C<accept>, and for the TLS client side of a	253	Unlike TCP, TLS has a server and client side: for the TLS server side, use
180	connection, use C<connect> mode.	254	C<accept>, and for the TLS client side of a connection, use C<connect>
		255	mode.
181		256
182	You can also provide your own TLS connection object, but you have	257	You can also provide your own TLS connection object, but you have
183	to make sure that you call either C<Net::SSLeay::set_connect_state>	258	to make sure that you call either C<Net::SSLeay::set_connect_state>
184	or C<Net::SSLeay::set_accept_state> on it before you pass it to	259	or C<Net::SSLeay::set_accept_state> on it before you pass it to
185	AnyEvent::Handle.	260	AnyEvent::Handle.
186		261
		262	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		263	passing in the wrong integer will lead to certain crash. This most often
		264	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		265	segmentation fault.
		266
187	See the C<starttls> method if you need to start TLs negotiation later.	267	See the C<< ->starttls >> method for when need to start TLS negotiation later.
188		268
189	=item tls_ctx => $ssl_ctx	269	=item tls_ctx => $ssl_ctx
190		270
191	Use the given Net::SSLeay::CTX object to create the new TLS connection	271	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection
192	(unless a connection object was specified directly). If this parameter is	272	(unless a connection object was specified directly). If this parameter is
193	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	273	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
194		274
195	=item json => JSON or JSON::XS object	275	=item json => JSON or JSON::XS object
196		276
197	This is the json coder object used by the C<json> read and write types.	277	This is the json coder object used by the C<json> read and write types.
198		278
199	If you don't supply it, then AnyEvent::Handle will create and use a	279	If you don't supply it, then AnyEvent::Handle will create and use a
200	suitable one, which will write and expect UTF-8 encoded JSON texts.	280	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		281	texts.
201		282
202	Note that you are responsible to depend on the JSON module if you want to	283	Note that you are responsible to depend on the JSON module if you want to
203	use this functionality, as AnyEvent does not have a dependency itself.	284	use this functionality, as AnyEvent does not have a dependency itself.
204		285
205	=item filter_r => $cb
206
207	=item filter_w => $cb
208
209	These exist, but are undocumented at this time.
210
211	=back	286	=back
212		287
213	=cut	288	=cut
214		289
215	sub new {	290	sub new {
…		…
219		294
220	$self->{fh} or Carp::croak "mandatory argument fh is missing";	295	$self->{fh} or Carp::croak "mandatory argument fh is missing";
221		296
222	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	297	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
223		298
224	if ($self->{tls}) {
225	require Net::SSLeay;
226	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	299	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
227	}	300	if $self->{tls};
228
229	# $self->on_eof (delete $self->{on_eof} ) if $self->{on_eof}; # nop
230	# $self->on_error (delete $self->{on_error}) if $self->{on_error}; # nop
231	# $self->on_read (delete $self->{on_read} ) if $self->{on_read}; # nop
232	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
233		301
234	$self->{_activity} = AnyEvent->now;	302	$self->{_activity} = AnyEvent->now;
235	$self->_timeout;	303	$self->_timeout;
236		304
		305	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};
		306	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
		307
237	$self->start_read;	308	$self->start_read
		309	if $self->{on_read};
238		310
239	$self	311	$self
240	}	312	}
241		313
242	sub _shutdown {	314	sub _shutdown {
…		…
245	delete $self->{_tw};	317	delete $self->{_tw};
246	delete $self->{_rw};	318	delete $self->{_rw};
247	delete $self->{_ww};	319	delete $self->{_ww};
248	delete $self->{fh};	320	delete $self->{fh};
249		321
250	$self->stoptls;	322	&_freetls;
		323
		324	delete $self->{on_read};
		325	delete $self->{_queue};
251	}	326	}
252		327
253	sub _error {	328	sub _error {
254	my ($self, $errno, $fatal) = @_;	329	my ($self, $errno, $fatal) = @_;
255		330
…		…
258		333
259	$! = $errno;	334	$! = $errno;
260		335
261	if ($self->{on_error}) {	336	if ($self->{on_error}) {
262	$self->{on_error}($self, $fatal);	337	$self->{on_error}($self, $fatal);
263	} else {	338	} elsif ($self->{fh}) {
264	Carp::croak "AnyEvent::Handle uncaught error: $!";	339	Carp::croak "AnyEvent::Handle uncaught error: $!";
265	}	340	}
266	}	341	}
267		342
268	=item $fh = $handle->fh	343	=item $fh = $handle->fh
269		344
270	This method returns the file handle of the L<AnyEvent::Handle> object.	345	This method returns the file handle used to create the L<AnyEvent::Handle> object.
271		346
272	=cut	347	=cut
273		348
274	sub fh { $_[0]{fh} }	349	sub fh { $_[0]{fh} }
275		350
…		…
293	$_[0]{on_eof} = $_[1];	368	$_[0]{on_eof} = $_[1];
294	}	369	}
295		370
296	=item $handle->on_timeout ($cb)	371	=item $handle->on_timeout ($cb)
297		372
298	Replace the current C<on_timeout> callback, or disables the callback	373	Replace the current C<on_timeout> callback, or disables the callback (but
299	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor	374	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
300	argument.	375	argument and method.
301		376
302	=cut	377	=cut
303		378
304	sub on_timeout {	379	sub on_timeout {
305	$_[0]{on_timeout} = $_[1];	380	$_[0]{on_timeout} = $_[1];
		381	}
		382
		383	=item $handle->autocork ($boolean)
		384
		385	Enables or disables the current autocork behaviour (see C<autocork>
		386	constructor argument). Changes will only take effect on the next write.
		387
		388	=cut
		389
		390	sub autocork {
		391	$_[0]{autocork} = $_[1];
		392	}
		393
		394	=item $handle->no_delay ($boolean)
		395
		396	Enables or disables the C<no_delay> setting (see constructor argument of
		397	the same name for details).
		398
		399	=cut
		400
		401	sub no_delay {
		402	$_[0]{no_delay} = $_[1];
		403
		404	eval {
		405	local $SIG{__DIE__};
		406	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];
		407	};
306	}	408	}
307		409
308	#############################################################################	410	#############################################################################
309		411
310	=item $handle->timeout ($seconds)	412	=item $handle->timeout ($seconds)
…		…
339	$self->{on_timeout}($self);	441	$self->{on_timeout}($self);
340	} else {	442	} else {
341	$self->_error (&Errno::ETIMEDOUT);	443	$self->_error (&Errno::ETIMEDOUT);
342	}	444	}
343		445
344	# callbakx could have changed timeout value, optimise	446	# callback could have changed timeout value, optimise
345	return unless $self->{timeout};	447	return unless $self->{timeout};
346		448
347	# calculate new after	449	# calculate new after
348	$after = $self->{timeout};	450	$after = $self->{timeout};
349	}	451	}
350		452
351	Scalar::Util::weaken $self;	453	Scalar::Util::weaken $self;
		454	return unless $self; # ->error could have destroyed $self
352		455
353	$self->{_tw} \|\|= AnyEvent->timer (after => $after, cb => sub {	456	$self->{_tw} \|\|= AnyEvent->timer (after => $after, cb => sub {
354	delete $self->{_tw};	457	delete $self->{_tw};
355	$self->_timeout;	458	$self->_timeout;
356	});	459	});
…		…
387	my ($self, $cb) = @_;	490	my ($self, $cb) = @_;
388		491
389	$self->{on_drain} = $cb;	492	$self->{on_drain} = $cb;
390		493
391	$cb->($self)	494	$cb->($self)
392	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	495	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
393	}	496	}
394		497
395	=item $handle->push_write ($data)	498	=item $handle->push_write ($data)
396		499
397	Queues the given scalar to be written. You can push as much data as you	500	Queues the given scalar to be written. You can push as much data as you
…		…
414	substr $self->{wbuf}, 0, $len, "";	517	substr $self->{wbuf}, 0, $len, "";
415		518
416	$self->{_activity} = AnyEvent->now;	519	$self->{_activity} = AnyEvent->now;
417		520
418	$self->{on_drain}($self)	521	$self->{on_drain}($self)
419	if $self->{low_water_mark} >= length $self->{wbuf}	522	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
420	&& $self->{on_drain};	523	&& $self->{on_drain};
421		524
422	delete $self->{_ww} unless length $self->{wbuf};	525	delete $self->{_ww} unless length $self->{wbuf};
423	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	526	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
424	$self->_error ($!, 1);	527	$self->_error ($!, 1);
425	}	528	}
426	};	529	};
427		530
428	# try to write data immediately	531	# try to write data immediately
429	$cb->();	532	$cb->() unless $self->{autocork};
430		533
431	# if still data left in wbuf, we need to poll	534	# if still data left in wbuf, we need to poll
432	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	535	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)
433	if length $self->{wbuf};	536	if length $self->{wbuf};
434	};	537	};
…		…
448		551
449	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	552	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
450	->($self, @_);	553	->($self, @_);
451	}	554	}
452		555
453	if ($self->{filter_w}) {	556	if ($self->{tls}) {
454	$self->{filter_w}($self, \$_[0]);	557	$self->{_tls_wbuf} .= $_[0];
		558
		559	&_dotls ($self);
455	} else {	560	} else {
456	$self->{wbuf} .= $_[0];	561	$self->{wbuf} .= $_[0];
457	$self->_drain_wbuf;	562	$self->_drain_wbuf;
458	}	563	}
459	}	564	}
…		…
476	=cut	581	=cut
477		582
478	register_write_type netstring => sub {	583	register_write_type netstring => sub {
479	my ($self, $string) = @_;	584	my ($self, $string) = @_;
480		585
481	sprintf "%d:%s,", (length $string), $string	586	(length $string) . ":$string,"
		587	};
		588
		589	=item packstring => $format, $data
		590
		591	An octet string prefixed with an encoded length. The encoding C<$format>
		592	uses the same format as a Perl C<pack> format, but must specify a single
		593	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		594	optional C<!>, C<< < >> or C<< > >> modifier).
		595
		596	=cut
		597
		598	register_write_type packstring => sub {
		599	my ($self, $format, $string) = @_;
		600
		601	pack "$format/a*", $string
482	};	602	};
483		603
484	=item json => $array_or_hashref	604	=item json => $array_or_hashref
485		605
486	Encodes the given hash or array reference into a JSON object. Unless you	606	Encodes the given hash or array reference into a JSON object. Unless you
…		…
520		640
521	$self->{json} ? $self->{json}->encode ($ref)	641	$self->{json} ? $self->{json}->encode ($ref)
522	: JSON::encode_json ($ref)	642	: JSON::encode_json ($ref)
523	};	643	};
524		644
		645	=item storable => $reference
		646
		647	Freezes the given reference using L<Storable> and writes it to the
		648	handle. Uses the C<nfreeze> format.
		649
		650	=cut
		651
		652	register_write_type storable => sub {
		653	my ($self, $ref) = @_;
		654
		655	require Storable;
		656
		657	pack "w/a*", Storable::nfreeze ($ref)
		658	};
		659
525	=back	660	=back
526		661
527	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	662	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
528		663
529	This function (not method) lets you add your own types to C<push_write>.	664	This function (not method) lets you add your own types to C<push_write>.
…		…
551	ways, the "simple" way, using only C<on_read> and the "complex" way, using	686	ways, the "simple" way, using only C<on_read> and the "complex" way, using
552	a queue.	687	a queue.
553		688
554	In the simple case, you just install an C<on_read> callback and whenever	689	In the simple case, you just install an C<on_read> callback and whenever
555	new data arrives, it will be called. You can then remove some data (if	690	new data arrives, it will be called. You can then remove some data (if
556	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	691	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
557	or not.	692	leave the data there if you want to accumulate more (e.g. when only a
		693	partial message has been received so far).
558		694
559	In the more complex case, you want to queue multiple callbacks. In this	695	In the more complex case, you want to queue multiple callbacks. In this
560	case, AnyEvent::Handle will call the first queued callback each time new	696	case, AnyEvent::Handle will call the first queued callback each time new
561	data arrives and removes it when it has done its job (see C<push_read>,	697	data arrives (also the first time it is queued) and removes it when it has
562	below).	698	done its job (see C<push_read>, below).
563		699
564	This way you can, for example, push three line-reads, followed by reading	700	This way you can, for example, push three line-reads, followed by reading
565	a chunk of data, and AnyEvent::Handle will execute them in order.	701	a chunk of data, and AnyEvent::Handle will execute them in order.
566		702
567	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	703	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
…		…
580	# handle xml	716	# handle xml
581	});	717	});
582	});	718	});
583	});	719	});
584		720
585	Example 2: Implement a client for a protocol that replies either with	721	Example 2: Implement a client for a protocol that replies either with "OK"
586	"OK" and another line or "ERROR" for one request, and 64 bytes for the	722	and another line or "ERROR" for the first request that is sent, and 64
587	second request. Due tot he availability of a full queue, we can just	723	bytes for the second request. Due to the availability of a queue, we can
588	pipeline sending both requests and manipulate the queue as necessary in	724	just pipeline sending both requests and manipulate the queue as necessary
589	the callbacks:	725	in the callbacks.
590		726
591	# request one	727	When the first callback is called and sees an "OK" response, it will
		728	C<unshift> another line-read. This line-read will be queued I<before> the
		729	64-byte chunk callback.
		730
		731	# request one, returns either "OK + extra line" or "ERROR"
592	$handle->push_write ("request 1\015\012");	732	$handle->push_write ("request 1\015\012");
593		733
594	# we expect "ERROR" or "OK" as response, so push a line read	734	# we expect "ERROR" or "OK" as response, so push a line read
595	$handle->push_read (line => sub {	735	$handle->push_read (line => sub {
596	# if we got an "OK", we have to _prepend_ another line,	736	# if we got an "OK", we have to _prepend_ another line,
…		…
603	...	743	...
604	});	744	});
605	}	745	}
606	});	746	});
607		747
608	# request two	748	# request two, simply returns 64 octets
609	$handle->push_write ("request 2\015\012");	749	$handle->push_write ("request 2\015\012");
610		750
611	# simply read 64 bytes, always	751	# simply read 64 bytes, always
612	$handle->push_read (chunk => 64, sub {	752	$handle->push_read (chunk => 64, sub {
613	my $response = $_[1];	753	my $response = $_[1];
…		…
619	=cut	759	=cut
620		760
621	sub _drain_rbuf {	761	sub _drain_rbuf {
622	my ($self) = @_;	762	my ($self) = @_;
623		763
		764	local $self->{_in_drain} = 1;
		765
624	if (	766	if (
625	defined $self->{rbuf_max}	767	defined $self->{rbuf_max}
626	&& $self->{rbuf_max} < length $self->{rbuf}	768	&& $self->{rbuf_max} < length $self->{rbuf}
627	) {	769	) {
628	return $self->_error (&Errno::ENOSPC, 1);	770	$self->_error (&Errno::ENOSPC, 1), return;
629	}	771	}
630		772
631	return if $self->{in_drain};	773	while () {
632	local $self->{in_drain} = 1;	774	# we need to use a separate tls read buffer, as we must not receive data while
		775	# we are draining the buffer, and this can only happen with TLS.
		776	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};
633		777
634	while (my $len = length $self->{rbuf}) {	778	my $len = length $self->{rbuf};
635	no strict 'refs';	779
636	if (my $cb = shift @{ $self->{_queue} }) {	780	if (my $cb = shift @{ $self->{_queue} }) {
637	unless ($cb->($self)) {	781	unless ($cb->($self)) {
638	if ($self->{_eof}) {	782	if ($self->{_eof}) {
639	# no progress can be made (not enough data and no data forthcoming)	783	# no progress can be made (not enough data and no data forthcoming)
640	return $self->_error (&Errno::EPIPE, 1);	784	$self->_error (&Errno::EPIPE, 1), return;
641	}	785	}
642		786
643	unshift @{ $self->{_queue} }, $cb;	787	unshift @{ $self->{_queue} }, $cb;
644	return;	788	last;
645	}	789	}
646	} elsif ($self->{on_read}) {	790	} elsif ($self->{on_read}) {
		791	last unless $len;
		792
647	$self->{on_read}($self);	793	$self->{on_read}($self);
648		794
649	if (	795	if (
650	$self->{_eof} # if no further data will arrive
651	&& $len == length $self->{rbuf} # and no data has been consumed	796	$len == length $self->{rbuf} # if no data has been consumed
652	&& !@{ $self->{_queue} } # and the queue is still empty	797	&& !@{ $self->{_queue} } # and the queue is still empty
653	&& $self->{on_read} # and we still want to read data	798	&& $self->{on_read} # but we still have on_read
654	) {	799	) {
		800	# no further data will arrive
655	# then no progress can be made	801	# so no progress can be made
656	return $self->_error (&Errno::EPIPE, 1);	802	$self->_error (&Errno::EPIPE, 1), return
		803	if $self->{_eof};
		804
		805	last; # more data might arrive
657	}	806	}
658	} else {	807	} else {
659	# read side becomes idle	808	# read side becomes idle
660	delete $self->{_rw};	809	delete $self->{_rw} unless $self->{tls};
661	return;	810	last;
662	}	811	}
663	}	812	}
664		813
		814	if ($self->{_eof}) {
		815	if ($self->{on_eof}) {
665	$self->{on_eof}($self)	816	$self->{on_eof}($self)
666	if $self->{_eof} && $self->{on_eof};	817	} else {
		818	$self->_error (0, 1);
		819	}
		820	}
		821
		822	# may need to restart read watcher
		823	unless ($self->{_rw}) {
		824	$self->start_read
		825	if $self->{on_read} \|\| @{ $self->{_queue} };
		826	}
667	}	827	}
668		828
669	=item $handle->on_read ($cb)	829	=item $handle->on_read ($cb)
670		830
671	This replaces the currently set C<on_read> callback, or clears it (when	831	This replaces the currently set C<on_read> callback, or clears it (when
…		…
676		836
677	sub on_read {	837	sub on_read {
678	my ($self, $cb) = @_;	838	my ($self, $cb) = @_;
679		839
680	$self->{on_read} = $cb;	840	$self->{on_read} = $cb;
		841	$self->_drain_rbuf if $cb && !$self->{_in_drain};
681	}	842	}
682		843
683	=item $handle->rbuf	844	=item $handle->rbuf
684		845
685	Returns the read buffer (as a modifiable lvalue).	846	Returns the read buffer (as a modifiable lvalue).
686		847
687	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	848	You can access the read buffer directly as the C<< ->{rbuf} >>
688	you want.	849	member, if you want. However, the only operation allowed on the
		850	read buffer (apart from looking at it) is removing data from its
		851	beginning. Otherwise modifying or appending to it is not allowed and will
		852	lead to hard-to-track-down bugs.
689		853
690	NOTE: The read buffer should only be used or modified if the C<on_read>,	854	NOTE: The read buffer should only be used or modified if the C<on_read>,
691	C<push_read> or C<unshift_read> methods are used. The other read methods	855	C<push_read> or C<unshift_read> methods are used. The other read methods
692	automatically manage the read buffer.	856	automatically manage the read buffer.
693		857
…		…
734	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	898	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
735	->($self, $cb, @_);	899	->($self, $cb, @_);
736	}	900	}
737		901
738	push @{ $self->{_queue} }, $cb;	902	push @{ $self->{_queue} }, $cb;
739	$self->_drain_rbuf;	903	$self->_drain_rbuf unless $self->{_in_drain};
740	}	904	}
741		905
742	sub unshift_read {	906	sub unshift_read {
743	my $self = shift;	907	my $self = shift;
744	my $cb = pop;	908	my $cb = pop;
…		…
750	->($self, $cb, @_);	914	->($self, $cb, @_);
751	}	915	}
752		916
753		917
754	unshift @{ $self->{_queue} }, $cb;	918	unshift @{ $self->{_queue} }, $cb;
755	$self->_drain_rbuf;	919	$self->_drain_rbuf unless $self->{_in_drain};
756	}	920	}
757		921
758	=item $handle->push_read (type => @args, $cb)	922	=item $handle->push_read (type => @args, $cb)
759		923
760	=item $handle->unshift_read (type => @args, $cb)	924	=item $handle->unshift_read (type => @args, $cb)
…		…
790	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	954	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
791	1	955	1
792	}	956	}
793	};	957	};
794		958
795	# compatibility with older API
796	sub push_read_chunk {
797	$_[0]->push_read (chunk => $_[1], $_[2]);
798	}
799
800	sub unshift_read_chunk {
801	$_[0]->unshift_read (chunk => $_[1], $_[2]);
802	}
803
804	=item line => [$eol, ]$cb->($handle, $line, $eol)	959	=item line => [$eol, ]$cb->($handle, $line, $eol)
805		960
806	The callback will be called only once a full line (including the end of	961	The callback will be called only once a full line (including the end of
807	line marker, C<$eol>) has been read. This line (excluding the end of line	962	line marker, C<$eol>) has been read. This line (excluding the end of line
808	marker) will be passed to the callback as second argument (C<$line>), and	963	marker) will be passed to the callback as second argument (C<$line>), and
…		…
823	=cut	978	=cut
824		979
825	register_read_type line => sub {	980	register_read_type line => sub {
826	my ($self, $cb, $eol) = @_;	981	my ($self, $cb, $eol) = @_;
827		982
828	$eol = qr\|(\015?\012)\| if @_ < 3;	983	if (@_ < 3) {
829	$eol = quotemeta $eol unless ref $eol;	984	# this is more than twice as fast as the generic code below
830	$eol = qr\|^(.*?)($eol)\|s;
831
832	sub {	985	sub {
833	$_[0]{rbuf} =~ s/$eol// or return;	986	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
834		987
835	$cb->($_[0], $1, $2);	988	$cb->($_[0], $1, $2);
836	1
837	}
838	};
839
840	# compatibility with older API
841	sub push_read_line {
842	my $self = shift;
843	$self->push_read (line => @_);
844	}
845
846	sub unshift_read_line {
847	my $self = shift;
848	$self->unshift_read (line => @_);
849	}
850
851	=item netstring => $cb->($handle, $string)
852
853	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
854
855	Throws an error with C<$!> set to EBADMSG on format violations.
856
857	=cut
858
859	register_read_type netstring => sub {
860	my ($self, $cb) = @_;
861
862	sub {
863	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
864	if ($_[0]{rbuf} =~ /[^0-9]/) {
865	$self->_error (&Errno::EBADMSG);
866	}	989	1
867	return;
868	}	990	}
		991	} else {
		992	$eol = quotemeta $eol unless ref $eol;
		993	$eol = qr\|^(.*?)($eol)\|s;
869		994
870	my $len = $1;	995	sub {
		996	$_[0]{rbuf} =~ s/$eol// or return;
871		997
872	$self->unshift_read (chunk => $len, sub {	998	$cb->($_[0], $1, $2);
873	my $string = $_[1];
874	$_[0]->unshift_read (chunk => 1, sub {
875	if ($_[1] eq ",") {
876	$cb->($_[0], $string);
877	} else {
878	$self->_error (&Errno::EBADMSG);
879	}
880	});	999	1
881	});	1000	}
882
883	1
884	}	1001	}
885	};	1002	};
886		1003
887	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1004	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
888		1005
…		…
952		1069
953	()	1070	()
954	}	1071	}
955	};	1072	};
956		1073
		1074	=item netstring => $cb->($handle, $string)
		1075
		1076	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
		1077
		1078	Throws an error with C<$!> set to EBADMSG on format violations.
		1079
		1080	=cut
		1081
		1082	register_read_type netstring => sub {
		1083	my ($self, $cb) = @_;
		1084
		1085	sub {
		1086	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
		1087	if ($_[0]{rbuf} =~ /[^0-9]/) {
		1088	$self->_error (&Errno::EBADMSG);
		1089	}
		1090	return;
		1091	}
		1092
		1093	my $len = $1;
		1094
		1095	$self->unshift_read (chunk => $len, sub {
		1096	my $string = $_[1];
		1097	$_[0]->unshift_read (chunk => 1, sub {
		1098	if ($_[1] eq ",") {
		1099	$cb->($_[0], $string);
		1100	} else {
		1101	$self->_error (&Errno::EBADMSG);
		1102	}
		1103	});
		1104	});
		1105
		1106	1
		1107	}
		1108	};
		1109
		1110	=item packstring => $format, $cb->($handle, $string)
		1111
		1112	An octet string prefixed with an encoded length. The encoding C<$format>
		1113	uses the same format as a Perl C<pack> format, but must specify a single
		1114	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1115	optional C<!>, C<< < >> or C<< > >> modifier).
		1116
		1117	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1118	EPP uses a prefix of C<N> (4 octtes).
		1119
		1120	Example: read a block of data prefixed by its length in BER-encoded
		1121	format (very efficient).
		1122
		1123	$handle->push_read (packstring => "w", sub {
		1124	my ($handle, $data) = @_;
		1125	});
		1126
		1127	=cut
		1128
		1129	register_read_type packstring => sub {
		1130	my ($self, $cb, $format) = @_;
		1131
		1132	sub {
		1133	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1134	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
		1135	or return;
		1136
		1137	$format = length pack $format, $len;
		1138
		1139	# bypass unshift if we already have the remaining chunk
		1140	if ($format + $len <= length $_[0]{rbuf}) {
		1141	my $data = substr $_[0]{rbuf}, $format, $len;
		1142	substr $_[0]{rbuf}, 0, $format + $len, "";
		1143	$cb->($_[0], $data);
		1144	} else {
		1145	# remove prefix
		1146	substr $_[0]{rbuf}, 0, $format, "";
		1147
		1148	# read remaining chunk
		1149	$_[0]->unshift_read (chunk => $len, $cb);
		1150	}
		1151
		1152	1
		1153	}
		1154	};
		1155
957	=item json => $cb->($handle, $hash_or_arrayref)	1156	=item json => $cb->($handle, $hash_or_arrayref)
958		1157
959	Reads a JSON object or array, decodes it and passes it to the callback.	1158	Reads a JSON object or array, decodes it and passes it to the
		1159	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
960		1160
961	If a C<json> object was passed to the constructor, then that will be used	1161	If a C<json> object was passed to the constructor, then that will be used
962	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1162	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
963		1163
964	This read type uses the incremental parser available with JSON version	1164	This read type uses the incremental parser available with JSON version
…		…
971	the C<json> write type description, above, for an actual example.	1171	the C<json> write type description, above, for an actual example.
972		1172
973	=cut	1173	=cut
974		1174
975	register_read_type json => sub {	1175	register_read_type json => sub {
976	my ($self, $cb, $accept, $reject, $skip) = @_;	1176	my ($self, $cb) = @_;
977		1177
978	require JSON;	1178	require JSON;
979		1179
980	my $data;	1180	my $data;
981	my $rbuf = \$self->{rbuf};	1181	my $rbuf = \$self->{rbuf};
982		1182
983	my $json = $self->{json} \|\|= JSON->new->utf8;	1183	my $json = $self->{json} \|\|= JSON->new->utf8;
984		1184
985	sub {	1185	sub {
986	my $ref = $json->incr_parse ($self->{rbuf});	1186	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
987		1187
988	if ($ref) {	1188	if ($ref) {
989	$self->{rbuf} = $json->incr_text;	1189	$self->{rbuf} = $json->incr_text;
990	$json->incr_text = "";	1190	$json->incr_text = "";
991	$cb->($self, $ref);	1191	$cb->($self, $ref);
992		1192
993	1	1193	1
		1194	} elsif ($@) {
		1195	# error case
		1196	$json->incr_skip;
		1197
		1198	$self->{rbuf} = $json->incr_text;
		1199	$json->incr_text = "";
		1200
		1201	$self->_error (&Errno::EBADMSG);
		1202
		1203	()
994	} else {	1204	} else {
995	$self->{rbuf} = "";	1205	$self->{rbuf} = "";
		1206
996	()	1207	()
997	}	1208	}
		1209	}
		1210	};
		1211
		1212	=item storable => $cb->($handle, $ref)
		1213
		1214	Deserialises a L<Storable> frozen representation as written by the
		1215	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1216	data).
		1217
		1218	Raises C<EBADMSG> error if the data could not be decoded.
		1219
		1220	=cut
		1221
		1222	register_read_type storable => sub {
		1223	my ($self, $cb) = @_;
		1224
		1225	require Storable;
		1226
		1227	sub {
		1228	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1229	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
		1230	or return;
		1231
		1232	my $format = length pack "w", $len;
		1233
		1234	# bypass unshift if we already have the remaining chunk
		1235	if ($format + $len <= length $_[0]{rbuf}) {
		1236	my $data = substr $_[0]{rbuf}, $format, $len;
		1237	substr $_[0]{rbuf}, 0, $format + $len, "";
		1238	$cb->($_[0], Storable::thaw ($data));
		1239	} else {
		1240	# remove prefix
		1241	substr $_[0]{rbuf}, 0, $format, "";
		1242
		1243	# read remaining chunk
		1244	$_[0]->unshift_read (chunk => $len, sub {
		1245	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1246	$cb->($_[0], $ref);
		1247	} else {
		1248	$self->_error (&Errno::EBADMSG);
		1249	}
		1250	});
		1251	}
		1252
		1253	1
998	}	1254	}
999	};	1255	};
1000		1256
1001	=back	1257	=back
1002		1258
…		…
1023	=item $handle->stop_read	1279	=item $handle->stop_read
1024		1280
1025	=item $handle->start_read	1281	=item $handle->start_read
1026		1282
1027	In rare cases you actually do not want to read anything from the	1283	In rare cases you actually do not want to read anything from the
1028	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1284	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
1029	any queued callbacks will be executed then. To start reading again, call	1285	any queued callbacks will be executed then. To start reading again, call
1030	C<start_read>.	1286	C<start_read>.
1031		1287
		1288	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1289	you change the C<on_read> callback or push/unshift a read callback, and it
		1290	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1291	there are any read requests in the queue.
		1292
		1293	These methods will have no effect when in TLS mode (as TLS doesn't support
		1294	half-duplex connections).
		1295
1032	=cut	1296	=cut
1033		1297
1034	sub stop_read {	1298	sub stop_read {
1035	my ($self) = @_;	1299	my ($self) = @_;
1036		1300
1037	delete $self->{_rw};	1301	delete $self->{_rw} unless $self->{tls};
1038	}	1302	}
1039		1303
1040	sub start_read {	1304	sub start_read {
1041	my ($self) = @_;	1305	my ($self) = @_;
1042		1306
1043	unless ($self->{_rw} \|\| $self->{_eof}) {	1307	unless ($self->{_rw} \|\| $self->{_eof}) {
1044	Scalar::Util::weaken $self;	1308	Scalar::Util::weaken $self;
1045		1309
1046	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1310	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
1047	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1311	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1048	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;	1312	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;
1049		1313
1050	if ($len > 0) {	1314	if ($len > 0) {
1051	$self->{_activity} = AnyEvent->now;	1315	$self->{_activity} = AnyEvent->now;
1052		1316
1053	$self->{filter_r}	1317	if ($self->{tls}) {
1054	? $self->{filter_r}($self, $rbuf)	1318	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1055	: $self->_drain_rbuf;	1319
		1320	&_dotls ($self);
		1321	} else {
		1322	$self->_drain_rbuf unless $self->{_in_drain};
		1323	}
1056		1324
1057	} elsif (defined $len) {	1325	} elsif (defined $len) {
1058	delete $self->{_rw};	1326	delete $self->{_rw};
1059	$self->{_eof} = 1;	1327	$self->{_eof} = 1;
1060	$self->_drain_rbuf;	1328	$self->_drain_rbuf unless $self->{_in_drain};
1061		1329
1062	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1330	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1063	return $self->_error ($!, 1);	1331	return $self->_error ($!, 1);
1064	}	1332	}
1065	});	1333	});
1066	}	1334	}
1067	}	1335	}
1068		1336
		1337	# poll the write BIO and send the data if applicable
1069	sub _dotls {	1338	sub _dotls {
1070	my ($self) = @_;	1339	my ($self) = @_;
1071		1340
		1341	my $tmp;
		1342
1072	if (length $self->{_tls_wbuf}) {	1343	if (length $self->{_tls_wbuf}) {
1073	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1344	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1074	substr $self->{_tls_wbuf}, 0, $len, "";	1345	substr $self->{_tls_wbuf}, 0, $tmp, "";
1075	}	1346	}
1076	}	1347	}
1077		1348
1078	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1079	$self->{wbuf} .= $buf;
1080	$self->_drain_wbuf;
1081	}
1082
1083	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {	1349	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1350	unless (length $tmp) {
		1351	# let's treat SSL-eof as we treat normal EOF
		1352	delete $self->{_rw};
		1353	$self->{_eof} = 1;
		1354	&_freetls;
		1355	}
		1356
1084	$self->{rbuf} .= $buf;	1357	$self->{_tls_rbuf} .= $tmp;
1085	$self->_drain_rbuf;	1358	$self->_drain_rbuf unless $self->{_in_drain};
		1359	$self->{tls} or return; # tls session might have gone away in callback
1086	}	1360	}
1087		1361
1088	my $err = Net::SSLeay::get_error ($self->{tls}, -1);	1362	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1089		1363
1090	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {	1364	if ($tmp != Net::SSLeay::ERROR_WANT_READ ()) {
1091	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {	1365	if ($tmp == Net::SSLeay::ERROR_SYSCALL ()) {
1092	return $self->_error ($!, 1);	1366	return $self->_error ($!, 1);
1093	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {	1367	} elsif ($tmp == Net::SSLeay::ERROR_SSL ()) {
1094	return $self->_error (&Errno::EIO, 1);	1368	return $self->_error (&Errno::EIO, 1);
1095	}	1369	}
1096		1370
1097	# all others are fine for our purposes	1371	# all other errors are fine for our purposes
		1372	}
		1373
		1374	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
		1375	$self->{wbuf} .= $tmp;
		1376	$self->_drain_wbuf;
1098	}	1377	}
1099	}	1378	}
1100		1379
1101	=item $handle->starttls ($tls[, $tls_ctx])	1380	=item $handle->starttls ($tls[, $tls_ctx])
1102		1381
…		…
1112		1391
1113	The TLS connection object will end up in C<< $handle->{tls} >> after this	1392	The TLS connection object will end up in C<< $handle->{tls} >> after this
1114	call and can be used or changed to your liking. Note that the handshake	1393	call and can be used or changed to your liking. Note that the handshake
1115	might have already started when this function returns.	1394	might have already started when this function returns.
1116		1395
		1396	If it an error to start a TLS handshake more than once per
		1397	AnyEvent::Handle object (this is due to bugs in OpenSSL).
		1398
1117	=cut	1399	=cut
1118		1400
1119	sub starttls {	1401	sub starttls {
1120	my ($self, $ssl, $ctx) = @_;	1402	my ($self, $ssl, $ctx) = @_;
1121		1403
1122	$self->stoptls;	1404	require Net::SSLeay;
1123		1405
		1406	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"
		1407	if $self->{tls};
		1408
1124	if ($ssl eq "accept") {	1409	if ($ssl eq "accept") {
1125	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1410	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());
1126	Net::SSLeay::set_accept_state ($ssl);	1411	Net::SSLeay::set_accept_state ($ssl);
1127	} elsif ($ssl eq "connect") {	1412	} elsif ($ssl eq "connect") {
1128	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1413	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());
…		…
1134	# basically, this is deep magic (because SSL_read should have the same issues)	1419	# basically, this is deep magic (because SSL_read should have the same issues)
1135	# but the openssl maintainers basically said: "trust us, it just works".	1420	# but the openssl maintainers basically said: "trust us, it just works".
1136	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1421	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1137	# and mismaintained ssleay-module doesn't even offer them).	1422	# and mismaintained ssleay-module doesn't even offer them).
1138	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1423	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1424	#
		1425	# in short: this is a mess.
		1426	#
		1427	# note that we do not try to keep the length constant between writes as we are required to do.
		1428	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1429	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1430	# have identity issues in that area.
1139	Net::SSLeay::CTX_set_mode ($self->{tls},	1431	Net::SSLeay::CTX_set_mode ($self->{tls},
1140	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)	1432	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)
1141	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));	1433	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));
1142		1434
1143	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1435	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1144	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1436	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1145		1437
1146	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1438	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});
1147		1439
1148	$self->{filter_w} = sub {	1440	&_dotls; # need to trigger the initial handshake
1149	$_[0]{_tls_wbuf} .= ${$_[1]};	1441	$self->start_read; # make sure we actually do read
1150	&_dotls;
1151	};
1152	$self->{filter_r} = sub {
1153	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1154	&_dotls;
1155	};
1156	}	1442	}
1157		1443
1158	=item $handle->stoptls	1444	=item $handle->stoptls
1159		1445
1160	Destroys the SSL connection, if any. Partial read or write data will be	1446	Shuts down the SSL connection - this makes a proper EOF handshake by
1161	lost.	1447	sending a close notify to the other side, but since OpenSSL doesn't
		1448	support non-blocking shut downs, it is not possible to re-use the stream
		1449	afterwards.
1162		1450
1163	=cut	1451	=cut
1164		1452
1165	sub stoptls {	1453	sub stoptls {
1166	my ($self) = @_;	1454	my ($self) = @_;
1167		1455
		1456	if ($self->{tls}) {
		1457	Net::SSLeay::shutdown ($self->{tls});
		1458
		1459	&_dotls;
		1460
		1461	# we don't give a shit. no, we do, but we can't. no...
		1462	# we, we... have to use openssl :/
		1463	&_freetls;
		1464	}
		1465	}
		1466
		1467	sub _freetls {
		1468	my ($self) = @_;
		1469
		1470	return unless $self->{tls};
		1471
1168	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1472	Net::SSLeay::free (delete $self->{tls});
1169		1473
1170	delete $self->{_rbio};	1474	delete @$self{qw(_rbio _wbio _tls_wbuf)};
1171	delete $self->{_wbio};
1172	delete $self->{_tls_wbuf};
1173	delete $self->{filter_r};
1174	delete $self->{filter_w};
1175	}	1475	}
1176		1476
1177	sub DESTROY {	1477	sub DESTROY {
1178	my $self = shift;	1478	my $self = shift;
1179		1479
1180	$self->stoptls;	1480	&_freetls;
		1481
		1482	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1483
		1484	if ($linger && length $self->{wbuf}) {
		1485	my $fh = delete $self->{fh};
		1486	my $wbuf = delete $self->{wbuf};
		1487
		1488	my @linger;
		1489
		1490	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {
		1491	my $len = syswrite $fh, $wbuf, length $wbuf;
		1492
		1493	if ($len > 0) {
		1494	substr $wbuf, 0, $len, "";
		1495	} else {
		1496	@linger = (); # end
		1497	}
		1498	});
		1499	push @linger, AnyEvent->timer (after => $linger, cb => sub {
		1500	@linger = ();
		1501	});
		1502	}
		1503	}
		1504
		1505	=item $handle->destroy
		1506
		1507	Shuts down the handle object as much as possible - this call ensures that
		1508	no further callbacks will be invoked and resources will be freed as much
		1509	as possible. You must not call any methods on the object afterwards.
		1510
		1511	Normally, you can just "forget" any references to an AnyEvent::Handle
		1512	object and it will simply shut down. This works in fatal error and EOF
		1513	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1514	callback, so when you want to destroy the AnyEvent::Handle object from
		1515	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1516	that case.
		1517
		1518	The handle might still linger in the background and write out remaining
		1519	data, as specified by the C<linger> option, however.
		1520
		1521	=cut
		1522
		1523	sub destroy {
		1524	my ($self) = @_;
		1525
		1526	$self->DESTROY;
		1527	%$self = ();
1181	}	1528	}
1182		1529
1183	=item AnyEvent::Handle::TLS_CTX	1530	=item AnyEvent::Handle::TLS_CTX
1184		1531
1185	This function creates and returns the Net::SSLeay::CTX object used by	1532	This function creates and returns the Net::SSLeay::CTX object used by
…		…
1215	}	1562	}
1216	}	1563	}
1217		1564
1218	=back	1565	=back
1219		1566
		1567
		1568	=head1 NONFREQUENTLY ASKED QUESTIONS
		1569
		1570	=over 4
		1571
		1572	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1573	still get further invocations!
		1574
		1575	That's because AnyEvent::Handle keeps a reference to itself when handling
		1576	read or write callbacks.
		1577
		1578	It is only safe to "forget" the reference inside EOF or error callbacks,
		1579	from within all other callbacks, you need to explicitly call the C<<
		1580	->destroy >> method.
		1581
		1582	=item I get different callback invocations in TLS mode/Why can't I pause
		1583	reading?
		1584
		1585	Unlike, say, TCP, TLS connections do not consist of two independent
		1586	communication channels, one for each direction. Or put differently. The
		1587	read and write directions are not independent of each other: you cannot
		1588	write data unless you are also prepared to read, and vice versa.
		1589
		1590	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		1591	callback invocations when you are not expecting any read data - the reason
		1592	is that AnyEvent::Handle always reads in TLS mode.
		1593
		1594	During the connection, you have to make sure that you always have a
		1595	non-empty read-queue, or an C<on_read> watcher. At the end of the
		1596	connection (or when you no longer want to use it) you can call the
		1597	C<destroy> method.
		1598
		1599	=item How do I read data until the other side closes the connection?
		1600
		1601	If you just want to read your data into a perl scalar, the easiest way
		1602	to achieve this is by setting an C<on_read> callback that does nothing,
		1603	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		1604	will be in C<$_[0]{rbuf}>:
		1605
		1606	$handle->on_read (sub { });
		1607	$handle->on_eof (undef);
		1608	$handle->on_error (sub {
		1609	my $data = delete $_[0]{rbuf};
		1610	undef $handle;
		1611	});
		1612
		1613	The reason to use C<on_error> is that TCP connections, due to latencies
		1614	and packets loss, might get closed quite violently with an error, when in
		1615	fact, all data has been received.
		1616
		1617	It is usually better to use acknowledgements when transferring data,
		1618	to make sure the other side hasn't just died and you got the data
		1619	intact. This is also one reason why so many internet protocols have an
		1620	explicit QUIT command.
		1621
		1622	=item I don't want to destroy the handle too early - how do I wait until
		1623	all data has been written?
		1624
		1625	After writing your last bits of data, set the C<on_drain> callback
		1626	and destroy the handle in there - with the default setting of
		1627	C<low_water_mark> this will be called precisely when all data has been
		1628	written to the socket:
		1629
		1630	$handle->push_write (...);
		1631	$handle->on_drain (sub {
		1632	warn "all data submitted to the kernel\n";
		1633	undef $handle;
		1634	});
		1635
		1636	=back
		1637
		1638
1220	=head1 SUBCLASSING AnyEvent::Handle	1639	=head1 SUBCLASSING AnyEvent::Handle
1221		1640
1222	In many cases, you might want to subclass AnyEvent::Handle.	1641	In many cases, you might want to subclass AnyEvent::Handle.
1223		1642
1224	To make this easier, a given version of AnyEvent::Handle uses these	1643	To make this easier, a given version of AnyEvent::Handle uses these
…		…
1227	=over 4	1646	=over 4
1228		1647
1229	=item * all constructor arguments become object members.	1648	=item * all constructor arguments become object members.
1230		1649
1231	At least initially, when you pass a C<tls>-argument to the constructor it	1650	At least initially, when you pass a C<tls>-argument to the constructor it
1232	will end up in C<< $handle->{tls} >>. Those members might be changes or	1651	will end up in C<< $handle->{tls} >>. Those members might be changed or
1233	mutated later on (for example C<tls> will hold the TLS connection object).	1652	mutated later on (for example C<tls> will hold the TLS connection object).
1234		1653
1235	=item * other object member names are prefixed with an C<_>.	1654	=item * other object member names are prefixed with an C<_>.
1236		1655
1237	All object members not explicitly documented (internal use) are prefixed	1656	All object members not explicitly documented (internal use) are prefixed

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.54 by root, Tue Jun 3 09:02:46 2008 UTC vs. Revision 1.118 by root, Thu Feb 12 17:33:38 2009 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.54 by root, Tue Jun 3 09:02:46 2008 UTC vs.
Revision 1.118 by root, Thu Feb 12 17:33:38 2009 UTC