ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.35 by root, Mon May 26 05:46:35 2008 UTC vs.
Revision 1.159 by root, Fri Jul 24 12:35:58 2009 UTC

1	package AnyEvent::Handle;	1	package AnyEvent::Handle;
2		2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAWOULDBLOCK);
8	use Scalar::Util ();	3	use Scalar::Util ();
9	use Carp ();	4	use Carp ();
10	use Fcntl ();
11	use Errno qw/EAGAIN EINTR/;	5	use Errno qw(EAGAIN EINTR);
		6
		7	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		8	use AnyEvent::Util qw(WSAEWOULDBLOCK);
12		9
13	=head1 NAME	10	=head1 NAME
14		11
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	12	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		13
17	=cut	14	=cut
18		15
19	our $VERSION = '0.04';	16	our $VERSION = 4.86;
20		17
21	=head1 SYNOPSIS	18	=head1 SYNOPSIS
22		19
23	use AnyEvent;	20	use AnyEvent;
24	use AnyEvent::Handle;	21	use AnyEvent::Handle;
25		22
26	my $cv = AnyEvent->condvar;	23	my $cv = AnyEvent->condvar;
27		24
28	my $handle =	25	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	26	fh => \*STDIN,
31	on_eof => sub {	27	on_error => sub {
32	$cv->broadcast;	28	my ($hdl, $fatal, $msg) = @_;
33	},	29	warn "got error $msg\n";
		30	$hdl->destroy;
		31	$cv->send;
34	);	32	);
35		33
36	# send some request line	34	# send some request line
37	$handle->push_write ("getinfo\015\012");	35	$hdl->push_write ("getinfo\015\012");
38		36
39	# read the response line	37	# read the response line
40	$handle->push_read (line => sub {	38	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	39	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	40	warn "got line <$line>\n";
43	$cv->send;	41	$cv->send;
44	});	42	});
45		43
46	$cv->recv;	44	$cv->recv;
47		45
48	=head1 DESCRIPTION	46	=head1 DESCRIPTION
49		47
50	This module is a helper module to make it easier to do event-based I/O on	48	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	49	filehandles.
52	on sockets see L<AnyEvent::Util>.	50
		51	The L<AnyEvent::Intro> tutorial contains some well-documented
		52	AnyEvent::Handle examples.
53		53
54	In the following, when the documentation refers to of "bytes" then this	54	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	55	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	56	treatment of characters applies to this module as well.
57		57
		58	At the very minimum, you should specify C<fh> or C<connect>, and the
		59	C<on_error> callback.
		60
58	All callbacks will be invoked with the handle object as their first	61	All callbacks will be invoked with the handle object as their first
59	argument.	62	argument.
60		63
61	=head1 METHODS	64	=head1 METHODS
62		65
63	=over 4	66	=over 4
64		67
65	=item B<new (%args)>	68	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
66		69
67	The constructor supports these arguments (all as key => value pairs).	70	The constructor supports these arguments (all as C<< key => value >> pairs).
68		71
69	=over 4	72	=over 4
70		73
71	=item fh => $filehandle [MANDATORY]	74	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		75
73	The filehandle this L<AnyEvent::Handle> object will operate on.	76	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	77	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	78	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		79	that mode.
77		80
78	=item on_eof => $cb->($self)	81	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
79		82
80	Set the callback to be called on EOF.	83	Try to connect to the specified host and service (port), using
		84	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		85	default C<peername>.
81		86
82	While not mandatory, it is highly recommended to set an eof callback,	87	You have to specify either this parameter, or C<fh>, above.
83	otherwise you might end up with a closed socket while you are still
84	waiting for data.
85		88
		89	When this parameter is specified, then the C<on_prepare>,
		90	C<on_connect_error> and C<on_connect> callbacks will be called under the
		91	appropriate circumstances:
		92
		93	=over 4
		94
86	=item on_error => $cb->($self)	95	=item on_prepare => $cb->($handle)
87		96
		97	This (rarely used) callback is called before a new connection is
		98	attempted, but after the file handle has been created. It could be used to
		99	prepare the file handle with parameters required for the actual connect
		100	(as opposed to settings that can be changed when the connection is already
		101	established).
		102
		103	=item on_connect => $cb->($handle, $host, $port, $retry->())
		104
		105	This callback is called when a connection has been successfully established.
		106
		107	The actual numeric host and port (the socket peername) are passed as
		108	parameters, together with a retry callback.
		109
		110	When, for some reason, the handle is not acceptable, then calling
		111	C<$retry> will continue with the next conenction target (in case of
		112	multi-homed hosts or SRV records there can be multiple connection
		113	endpoints). When it is called then the read and write queues, eof status,
		114	tls status and similar properties of the handle are being reset.
		115
		116	In most cases, ignoring the C<$retry> parameter is the way to go.
		117
		118	=item on_connect_error => $cb->($handle, $message)
		119
		120	This callback is called when the conenction could not be
		121	established. C<$!> will contain the relevant error code, and C<$message> a
		122	message describing it (usually the same as C<"$!">).
		123
		124	If this callback isn't specified, then C<on_error> will be called with a
		125	fatal error instead.
		126
		127	=back
		128
		129	=item on_error => $cb->($handle, $fatal, $message)
		130
88	This is the fatal error callback, that is called when, well, a fatal error	131	This is the error callback, which is called when, well, some error
89	occurs, such as not being able to resolve the hostname, failure to connect	132	occured, such as not being able to resolve the hostname, failure to
90	or a read error.	133	connect or a read error.
91		134
92	The object will not be in a usable state when this callback has been	135	Some errors are fatal (which is indicated by C<$fatal> being true). On
93	called.	136	fatal errors the handle object will be destroyed (by a call to C<< ->
		137	destroy >>) after invoking the error callback (which means you are free to
		138	examine the handle object). Examples of fatal errors are an EOF condition
		139	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		140	cases where the other side can close the connection at their will it is
		141	often easiest to not report C<EPIPE> errors in this callback.
		142
		143	AnyEvent::Handle tries to find an appropriate error code for you to check
		144	against, but in some cases (TLS errors), this does not work well. It is
		145	recommended to always output the C<$message> argument in human-readable
		146	error messages (it's usually the same as C<"$!">).
		147
		148	Non-fatal errors can be retried by simply returning, but it is recommended
		149	to simply ignore this parameter and instead abondon the handle object
		150	when this callback is invoked. Examples of non-fatal errors are timeouts
		151	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
94		152
95	On callback entrance, the value of C<$!> contains the operating system	153	On callback entrance, the value of C<$!> contains the operating system
96	error (or C<ENOSPC>, C<EPIPE> or C<EBADMSG>).	154	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		155	C<EPROTO>).
97		156
98	While not mandatory, it is I<highly> recommended to set this callback, as	157	While not mandatory, it is I<highly> recommended to set this callback, as
99	you will not be notified of errors otherwise. The default simply calls	158	you will not be notified of errors otherwise. The default simply calls
100	die.	159	C<croak>.
101		160
102	=item on_read => $cb->($self)	161	=item on_read => $cb->($handle)
103		162
104	This sets the default read callback, which is called when data arrives	163	This sets the default read callback, which is called when data arrives
105	and no read request is in the queue.	164	and no read request is in the queue (unlike read queue callbacks, this
		165	callback will only be called when at least one octet of data is in the
		166	read buffer).
106		167
107	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	168	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
108	method or access the C<$self->{rbuf}> member directly.	169	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		170	must not enlarge or modify the read buffer, you can only remove data at
		171	the beginning from it.
109		172
110	When an EOF condition is detected then AnyEvent::Handle will first try to	173	When an EOF condition is detected then AnyEvent::Handle will first try to
111	feed all the remaining data to the queued callbacks and C<on_read> before	174	feed all the remaining data to the queued callbacks and C<on_read> before
112	calling the C<on_eof> callback. If no progress can be made, then a fatal	175	calling the C<on_eof> callback. If no progress can be made, then a fatal
113	error will be raised (with C<$!> set to C<EPIPE>).	176	error will be raised (with C<$!> set to C<EPIPE>).
114		177
		178	Note that, unlike requests in the read queue, an C<on_read> callback
		179	doesn't mean you I<require> some data: if there is an EOF and there
		180	are outstanding read requests then an error will be flagged. With an
		181	C<on_read> callback, the C<on_eof> callback will be invoked.
		182
		183	=item on_eof => $cb->($handle)
		184
		185	Set the callback to be called when an end-of-file condition is detected,
		186	i.e. in the case of a socket, when the other side has closed the
		187	connection cleanly, and there are no outstanding read requests in the
		188	queue (if there are read requests, then an EOF counts as an unexpected
		189	connection close and will be flagged as an error).
		190
		191	For sockets, this just means that the other side has stopped sending data,
		192	you can still try to write data, and, in fact, one can return from the EOF
		193	callback and continue writing data, as only the read part has been shut
		194	down.
		195
		196	If an EOF condition has been detected but no C<on_eof> callback has been
		197	set, then a fatal error will be raised with C<$!> set to <0>.
		198
115	=item on_drain => $cb->()	199	=item on_drain => $cb->($handle)
116		200
117	This sets the callback that is called when the write buffer becomes empty	201	This sets the callback that is called when the write buffer becomes empty
118	(or when the callback is set and the buffer is empty already).	202	(or when the callback is set and the buffer is empty already).
119		203
120	To append to the write buffer, use the C<< ->push_write >> method.	204	To append to the write buffer, use the C<< ->push_write >> method.
121		205
		206	This callback is useful when you don't want to put all of your write data
		207	into the queue at once, for example, when you want to write the contents
		208	of some file to the socket you might not want to read the whole file into
		209	memory and push it into the queue, but instead only read more data from
		210	the file when the write queue becomes empty.
		211
		212	=item timeout => $fractional_seconds
		213
		214	If non-zero, then this enables an "inactivity" timeout: whenever this many
		215	seconds pass without a successful read or write on the underlying file
		216	handle, the C<on_timeout> callback will be invoked (and if that one is
		217	missing, a non-fatal C<ETIMEDOUT> error will be raised).
		218
		219	Note that timeout processing is also active when you currently do not have
		220	any outstanding read or write requests: If you plan to keep the connection
		221	idle then you should disable the timout temporarily or ignore the timeout
		222	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		223	restart the timeout.
		224
		225	Zero (the default) disables this timeout.
		226
		227	=item on_timeout => $cb->($handle)
		228
		229	Called whenever the inactivity timeout passes. If you return from this
		230	callback, then the timeout will be reset as if some activity had happened,
		231	so this condition is not fatal in any way.
		232
122	=item rbuf_max => <bytes>	233	=item rbuf_max => <bytes>
123		234
124	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	235	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
125	when the read buffer ever (strictly) exceeds this size. This is useful to	236	when the read buffer ever (strictly) exceeds this size. This is useful to
126	avoid denial-of-service attacks.	237	avoid some forms of denial-of-service attacks.
127		238
128	For example, a server accepting connections from untrusted sources should	239	For example, a server accepting connections from untrusted sources should
129	be configured to accept only so-and-so much data that it cannot act on	240	be configured to accept only so-and-so much data that it cannot act on
130	(for example, when expecting a line, an attacker could send an unlimited	241	(for example, when expecting a line, an attacker could send an unlimited
131	amount of data without a callback ever being called as long as the line	242	amount of data without a callback ever being called as long as the line
132	isn't finished).	243	isn't finished).
133		244
		245	=item autocork => <boolean>
		246
		247	When disabled (the default), then C<push_write> will try to immediately
		248	write the data to the handle, if possible. This avoids having to register
		249	a write watcher and wait for the next event loop iteration, but can
		250	be inefficient if you write multiple small chunks (on the wire, this
		251	disadvantage is usually avoided by your kernel's nagle algorithm, see
		252	C<no_delay>, but this option can save costly syscalls).
		253
		254	When enabled, then writes will always be queued till the next event loop
		255	iteration. This is efficient when you do many small writes per iteration,
		256	but less efficient when you do a single write only per iteration (or when
		257	the write buffer often is full). It also increases write latency.
		258
		259	=item no_delay => <boolean>
		260
		261	When doing small writes on sockets, your operating system kernel might
		262	wait a bit for more data before actually sending it out. This is called
		263	the Nagle algorithm, and usually it is beneficial.
		264
		265	In some situations you want as low a delay as possible, which can be
		266	accomplishd by setting this option to a true value.
		267
		268	The default is your opertaing system's default behaviour (most likely
		269	enabled), this option explicitly enables or disables it, if possible.
		270
134	=item read_size => <bytes>	271	=item read_size => <bytes>
135		272
136	The default read block size (the amount of bytes this module will try to read	273	The default read block size (the amount of bytes this module will
137	on each [loop iteration). Default: C<4096>.	274	try to read during each loop iteration, which affects memory
		275	requirements). Default: C<8192>.
138		276
139	=item low_water_mark => <bytes>	277	=item low_water_mark => <bytes>
140		278
141	Sets the amount of bytes (default: C<0>) that make up an "empty" write	279	Sets the amount of bytes (default: C<0>) that make up an "empty" write
142	buffer: If the write reaches this size or gets even samller it is	280	buffer: If the write reaches this size or gets even samller it is
143	considered empty.	281	considered empty.
144		282
		283	Sometimes it can be beneficial (for performance reasons) to add data to
		284	the write buffer before it is fully drained, but this is a rare case, as
		285	the operating system kernel usually buffers data as well, so the default
		286	is good in almost all cases.
		287
		288	=item linger => <seconds>
		289
		290	If non-zero (default: C<3600>), then the destructor of the
		291	AnyEvent::Handle object will check whether there is still outstanding
		292	write data and will install a watcher that will write this data to the
		293	socket. No errors will be reported (this mostly matches how the operating
		294	system treats outstanding data at socket close time).
		295
		296	This will not work for partial TLS data that could not be encoded
		297	yet. This data will be lost. Calling the C<stoptls> method in time might
		298	help.
		299
		300	=item peername => $string
		301
		302	A string used to identify the remote site - usually the DNS hostname
		303	(I<not> IDN!) used to create the connection, rarely the IP address.
		304
		305	Apart from being useful in error messages, this string is also used in TLS
		306	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		307	verification will be skipped when C<peername> is not specified or
		308	C<undef>.
		309
145	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	310	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
146		311
147	When this parameter is given, it enables TLS (SSL) mode, that means it	312	When this parameter is given, it enables TLS (SSL) mode, that means
148	will start making tls handshake and will transparently encrypt/decrypt	313	AnyEvent will start a TLS handshake as soon as the conenction has been
149	data.	314	established and will transparently encrypt/decrypt data afterwards.
		315
		316	All TLS protocol errors will be signalled as C<EPROTO>, with an
		317	appropriate error message.
150		318
151	TLS mode requires Net::SSLeay to be installed (it will be loaded	319	TLS mode requires Net::SSLeay to be installed (it will be loaded
152	automatically when you try to create a TLS handle).	320	automatically when you try to create a TLS handle): this module doesn't
		321	have a dependency on that module, so if your module requires it, you have
		322	to add the dependency yourself.
153		323
154	For the TLS server side, use C<accept>, and for the TLS client side of a	324	Unlike TCP, TLS has a server and client side: for the TLS server side, use
155	connection, use C<connect> mode.	325	C<accept>, and for the TLS client side of a connection, use C<connect>
		326	mode.
156		327
157	You can also provide your own TLS connection object, but you have	328	You can also provide your own TLS connection object, but you have
158	to make sure that you call either C<Net::SSLeay::set_connect_state>	329	to make sure that you call either C<Net::SSLeay::set_connect_state>
159	or C<Net::SSLeay::set_accept_state> on it before you pass it to	330	or C<Net::SSLeay::set_accept_state> on it before you pass it to
160	AnyEvent::Handle.	331	AnyEvent::Handle. Also, this module will take ownership of this connection
		332	object.
161		333
		334	At some future point, AnyEvent::Handle might switch to another TLS
		335	implementation, then the option to use your own session object will go
		336	away.
		337
		338	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		339	passing in the wrong integer will lead to certain crash. This most often
		340	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		341	segmentation fault.
		342
162	See the C<starttls> method if you need to start TLs negotiation later.	343	See the C<< ->starttls >> method for when need to start TLS negotiation later.
163		344
164	=item tls_ctx => $ssl_ctx	345	=item tls_ctx => $anyevent_tls
165		346
166	Use the given Net::SSLeay::CTX object to create the new TLS connection	347	Use the given C<AnyEvent::TLS> object to create the new TLS connection
167	(unless a connection object was specified directly). If this parameter is	348	(unless a connection object was specified directly). If this parameter is
168	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	349	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
169		350
		351	Instead of an object, you can also specify a hash reference with C<< key
		352	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		353	new TLS context object.
		354
		355	=item on_starttls => $cb->($handle, $success[, $error_message])
		356
		357	This callback will be invoked when the TLS/SSL handshake has finished. If
		358	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		359	(C<on_stoptls> will not be called in this case).
		360
		361	The session in C<< $handle->{tls} >> can still be examined in this
		362	callback, even when the handshake was not successful.
		363
		364	TLS handshake failures will not cause C<on_error> to be invoked when this
		365	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		366
		367	Without this callback, handshake failures lead to C<on_error> being
		368	called, as normal.
		369
		370	Note that you cannot call C<starttls> right again in this callback. If you
		371	need to do that, start an zero-second timer instead whose callback can
		372	then call C<< ->starttls >> again.
		373
		374	=item on_stoptls => $cb->($handle)
		375
		376	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		377	set, then it will be invoked after freeing the TLS session. If it is not,
		378	then a TLS shutdown condition will be treated like a normal EOF condition
		379	on the handle.
		380
		381	The session in C<< $handle->{tls} >> can still be examined in this
		382	callback.
		383
		384	This callback will only be called on TLS shutdowns, not when the
		385	underlying handle signals EOF.
		386
		387	=item json => JSON or JSON::XS object
		388
		389	This is the json coder object used by the C<json> read and write types.
		390
		391	If you don't supply it, then AnyEvent::Handle will create and use a
		392	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		393	texts.
		394
		395	Note that you are responsible to depend on the JSON module if you want to
		396	use this functionality, as AnyEvent does not have a dependency itself.
		397
170	=back	398	=back
171		399
172	=cut	400	=cut
173		401
174	sub new {	402	sub new {
175	my $class = shift;	403	my $class = shift;
176
177	my $self = bless { @_ }, $class;	404	my $self = bless { @_ }, $class;
178		405
179	$self->{fh} or Carp::croak "mandatory argument fh is missing";	406	if ($self->{fh}) {
		407	$self->_start;
		408	return unless $self->{fh}; # could be gone by now
		409
		410	} elsif ($self->{connect}) {
		411	require AnyEvent::Socket;
		412
		413	$self->{peername} = $self->{connect}[0]
		414	unless exists $self->{peername};
		415
		416	$self->{_skip_drain_rbuf} = 1;
		417
		418	{
		419	Scalar::Util::weaken (my $self = $self);
		420
		421	$self->{_connect} =
		422	AnyEvent::Socket::tcp_connect (
		423	$self->{connect}[0],
		424	$self->{connect}[1],
		425	sub {
		426	my ($fh, $host, $port, $retry) = @_;
		427
		428	if ($fh) {
		429	$self->{fh} = $fh;
		430
		431	delete $self->{_skip_drain_rbuf};
		432	$self->_start;
		433
		434	$self->{on_connect}
		435	and $self->{on_connect}($self, $host, $port, sub {
		436	delete @$self{qw(fh _tw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		437	$self->{_skip_drain_rbuf} = 1;
		438	&$retry;
		439	});
		440
		441	} else {
		442	if ($self->{on_connect_error}) {
		443	$self->{on_connect_error}($self, "$!");
		444	$self->destroy;
		445	} else {
		446	$self->fatal ($!, 1);
		447	}
		448	}
		449	},
		450	sub {
		451	local $self->{fh} = $_[0];
		452
		453	$self->{on_prepare}->($self)
		454	if $self->{on_prepare};
		455	}
		456	);
		457	}
		458
		459	} else {
		460	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		461	}
		462
		463	$self
		464	}
		465
		466	sub _start {
		467	my ($self) = @_;
180		468
181	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	469	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
182		470
183	if ($self->{tls}) {	471	$self->{_activity} = AnyEvent->now;
184	require Net::SSLeay;	472	$self->_timeout;
		473
		474	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
		475
185	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	476	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
186	}	477	if $self->{tls};
187		478
188	$self->on_eof (delete $self->{on_eof} ) if $self->{on_eof};
189	$self->on_error (delete $self->{on_error}) if $self->{on_error};
190	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	479	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
191	$self->on_read (delete $self->{on_read} ) if $self->{on_read};
192		480
193	$self->start_read;	481	$self->start_read
194		482	if $self->{on_read} || @{ $self->{_queue} };
195	$self
196	}	483	}
197		484
198	sub _shutdown {	485	#sub _shutdown {
199	my ($self) = @_;	486	# my ($self) = @_;
		487	#
		488	# delete @$self{qw(_tw _rw _ww fh wbuf on_read _queue)};
		489	# $self->{_eof} = 1; # tell starttls et. al to stop trying
		490	#
		491	# &_freetls;
		492	#}
200		493
201	delete $self->{rw};
202	delete $self->{ww};
203	delete $self->{fh};
204	}
205
206	sub error {	494	sub _error {
207	my ($self) = @_;	495	my ($self, $errno, $fatal, $message) = @_;
208		496
209	{	497	$! = $errno;
210	local $!;	498	$message ||= "$!";
211	$self->_shutdown;
212	}
213		499
214	if ($self->{on_error}) {	500	if ($self->{on_error}) {
215	$self->{on_error}($self);	501	$self->{on_error}($self, $fatal, $message);
216	} else {	502	$self->destroy if $fatal;
		503	} elsif ($self->{fh}) {
		504	$self->destroy;
217	Carp::croak "AnyEvent::Handle uncaught fatal error: $!";	505	Carp::croak "AnyEvent::Handle uncaught error: $message";
218	}	506	}
219	}	507	}
220		508
221	=item $fh = $handle->fh	509	=item $fh = $handle->fh
222		510
223	This method returns the file handle of the L<AnyEvent::Handle> object.	511	This method returns the file handle used to create the L<AnyEvent::Handle> object.
224		512
225	=cut	513	=cut
226		514
227	sub fh { $_[0]->{fh} }	515	sub fh { $_[0]{fh} }
228		516
229	=item $handle->on_error ($cb)	517	=item $handle->on_error ($cb)
230		518
231	Replace the current C<on_error> callback (see the C<on_error> constructor argument).	519	Replace the current C<on_error> callback (see the C<on_error> constructor argument).
232		520
…		…
244		532
245	sub on_eof {	533	sub on_eof {
246	$_[0]{on_eof} = $_[1];	534	$_[0]{on_eof} = $_[1];
247	}	535	}
248		536
		537	=item $handle->on_timeout ($cb)
		538
		539	Replace the current C<on_timeout> callback, or disables the callback (but
		540	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
		541	argument and method.
		542
		543	=cut
		544
		545	sub on_timeout {
		546	$_[0]{on_timeout} = $_[1];
		547	}
		548
		549	=item $handle->autocork ($boolean)
		550
		551	Enables or disables the current autocork behaviour (see C<autocork>
		552	constructor argument). Changes will only take effect on the next write.
		553
		554	=cut
		555
		556	sub autocork {
		557	$_[0]{autocork} = $_[1];
		558	}
		559
		560	=item $handle->no_delay ($boolean)
		561
		562	Enables or disables the C<no_delay> setting (see constructor argument of
		563	the same name for details).
		564
		565	=cut
		566
		567	sub no_delay {
		568	$_[0]{no_delay} = $_[1];
		569
		570	eval {
		571	local $SIG{__DIE__};
		572	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1]
		573	if $_[0]{fh};
		574	};
		575	}
		576
		577	=item $handle->on_starttls ($cb)
		578
		579	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		580
		581	=cut
		582
		583	sub on_starttls {
		584	$_[0]{on_starttls} = $_[1];
		585	}
		586
		587	=item $handle->on_stoptls ($cb)
		588
		589	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		590
		591	=cut
		592
		593	sub on_starttls {
		594	$_[0]{on_stoptls} = $_[1];
		595	}
		596
		597	#############################################################################
		598
		599	=item $handle->timeout ($seconds)
		600
		601	Configures (or disables) the inactivity timeout.
		602
		603	=cut
		604
		605	sub timeout {
		606	my ($self, $timeout) = @_;
		607
		608	$self->{timeout} = $timeout;
		609	$self->_timeout;
		610	}
		611
		612	# reset the timeout watcher, as neccessary
		613	# also check for time-outs
		614	sub _timeout {
		615	my ($self) = @_;
		616
		617	if ($self->{timeout} && $self->{fh}) {
		618	my $NOW = AnyEvent->now;
		619
		620	# when would the timeout trigger?
		621	my $after = $self->{_activity} + $self->{timeout} - $NOW;
		622
		623	# now or in the past already?
		624	if ($after <= 0) {
		625	$self->{_activity} = $NOW;
		626
		627	if ($self->{on_timeout}) {
		628	$self->{on_timeout}($self);
		629	} else {
		630	$self->_error (Errno::ETIMEDOUT);
		631	}
		632
		633	# callback could have changed timeout value, optimise
		634	return unless $self->{timeout};
		635
		636	# calculate new after
		637	$after = $self->{timeout};
		638	}
		639
		640	Scalar::Util::weaken $self;
		641	return unless $self; # ->error could have destroyed $self
		642
		643	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
		644	delete $self->{_tw};
		645	$self->_timeout;
		646	});
		647	} else {
		648	delete $self->{_tw};
		649	}
		650	}
		651
249	#############################################################################	652	#############################################################################
250		653
251	=back	654	=back
252		655
253	=head2 WRITE QUEUE	656	=head2 WRITE QUEUE
…		…
274	my ($self, $cb) = @_;	677	my ($self, $cb) = @_;
275		678
276	$self->{on_drain} = $cb;	679	$self->{on_drain} = $cb;
277		680
278	$cb->($self)	681	$cb->($self)
279	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	682	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
280	}	683	}
281		684
282	=item $handle->push_write ($data)	685	=item $handle->push_write ($data)
283		686
284	Queues the given scalar to be written. You can push as much data as you	687	Queues the given scalar to be written. You can push as much data as you
…		…
288	=cut	691	=cut
289		692
290	sub _drain_wbuf {	693	sub _drain_wbuf {
291	my ($self) = @_;	694	my ($self) = @_;
292		695
293	if (!$self->{ww} && length $self->{wbuf}) {	696	if (!$self->{_ww} && length $self->{wbuf}) {
294		697
295	Scalar::Util::weaken $self;	698	Scalar::Util::weaken $self;
296		699
297	my $cb = sub {	700	my $cb = sub {
298	my $len = syswrite $self->{fh}, $self->{wbuf};	701	my $len = syswrite $self->{fh}, $self->{wbuf};
299		702
300	if ($len >= 0) {	703	if (defined $len) {
301	substr $self->{wbuf}, 0, $len, "";	704	substr $self->{wbuf}, 0, $len, "";
302		705
		706	$self->{_activity} = AnyEvent->now;
		707
303	$self->{on_drain}($self)	708	$self->{on_drain}($self)
304	if $self->{low_water_mark} >= length $self->{wbuf}	709	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
305	&& $self->{on_drain};	710	&& $self->{on_drain};
306		711
307	delete $self->{ww} unless length $self->{wbuf};	712	delete $self->{_ww} unless length $self->{wbuf};
308	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAWOULDBLOCK) {	713	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
309	$self->error;	714	$self->_error ($!, 1);
310	}	715	}
311	};	716	};
312		717
313	# try to write data immediately	718	# try to write data immediately
314	$cb->();	719	$cb->() unless $self->{autocork};
315		720
316	# if still data left in wbuf, we need to poll	721	# if still data left in wbuf, we need to poll
317	$self->{ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	722	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)
318	if length $self->{wbuf};	723	if length $self->{wbuf};
319	};	724	};
320	}	725	}
321		726
322	our %WH;	727	our %WH;
…		…
333		738
334	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	739	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
335	->($self, @_);	740	->($self, @_);
336	}	741	}
337		742
338	if ($self->{filter_w}) {	743	if ($self->{tls}) {
339	$self->{filter_w}->($self, \$_[0]);	744	$self->{_tls_wbuf} .= $_[0];
		745
		746	&_dotls ($self);
340	} else {	747	} else {
341	$self->{wbuf} .= $_[0];	748	$self->{wbuf} .= $_[0];
342	$self->_drain_wbuf;	749	$self->_drain_wbuf if $self->{fh};
343	}	750	}
344	}	751	}
345		752
346	=item $handle->push_write (type => @args)	753	=item $handle->push_write (type => @args)
347
348	=item $handle->unshift_write (type => @args)
349		754
350	Instead of formatting your data yourself, you can also let this module do	755	Instead of formatting your data yourself, you can also let this module do
351	the job by specifying a type and type-specific arguments.	756	the job by specifying a type and type-specific arguments.
352		757
353	Predefined types are (if you have ideas for additional types, feel free to	758	Predefined types are (if you have ideas for additional types, feel free to
…		…
358	=item netstring => $string	763	=item netstring => $string
359		764
360	Formats the given value as netstring	765	Formats the given value as netstring
361	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).	766	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).
362		767
363	=back
364
365	=cut	768	=cut
366		769
367	register_write_type netstring => sub {	770	register_write_type netstring => sub {
368	my ($self, $string) = @_;	771	my ($self, $string) = @_;
369		772
370	sprintf "%d:%s,", (length $string), $string	773	(length $string) . ":$string,"
371	};	774	};
372		775
		776	=item packstring => $format, $data
		777
		778	An octet string prefixed with an encoded length. The encoding C<$format>
		779	uses the same format as a Perl C<pack> format, but must specify a single
		780	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		781	optional C<!>, C<< < >> or C<< > >> modifier).
		782
		783	=cut
		784
		785	register_write_type packstring => sub {
		786	my ($self, $format, $string) = @_;
		787
		788	pack "$format/a*", $string
		789	};
		790
		791	=item json => $array_or_hashref
		792
		793	Encodes the given hash or array reference into a JSON object. Unless you
		794	provide your own JSON object, this means it will be encoded to JSON text
		795	in UTF-8.
		796
		797	JSON objects (and arrays) are self-delimiting, so you can write JSON at
		798	one end of a handle and read them at the other end without using any
		799	additional framing.
		800
		801	The generated JSON text is guaranteed not to contain any newlines: While
		802	this module doesn't need delimiters after or between JSON texts to be
		803	able to read them, many other languages depend on that.
		804
		805	A simple RPC protocol that interoperates easily with others is to send
		806	JSON arrays (or objects, although arrays are usually the better choice as
		807	they mimic how function argument passing works) and a newline after each
		808	JSON text:
		809
		810	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
		811	$handle->push_write ("\012");
		812
		813	An AnyEvent::Handle receiver would simply use the C<json> read type and
		814	rely on the fact that the newline will be skipped as leading whitespace:
		815
		816	$handle->push_read (json => sub { my $array = $_[1]; ... });
		817
		818	Other languages could read single lines terminated by a newline and pass
		819	this line into their JSON decoder of choice.
		820
		821	=cut
		822
		823	register_write_type json => sub {
		824	my ($self, $ref) = @_;
		825
		826	require JSON;
		827
		828	$self->{json} ? $self->{json}->encode ($ref)
		829	: JSON::encode_json ($ref)
		830	};
		831
		832	=item storable => $reference
		833
		834	Freezes the given reference using L<Storable> and writes it to the
		835	handle. Uses the C<nfreeze> format.
		836
		837	=cut
		838
		839	register_write_type storable => sub {
		840	my ($self, $ref) = @_;
		841
		842	require Storable;
		843
		844	pack "w/a*", Storable::nfreeze ($ref)
		845	};
		846
		847	=back
		848
		849	=item $handle->push_shutdown
		850
		851	Sometimes you know you want to close the socket after writing your data
		852	before it was actually written. One way to do that is to replace your
		853	C<on_drain> handler by a callback that shuts down the socket (and set
		854	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		855	replaces the C<on_drain> callback with:
		856
		857	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		858
		859	This simply shuts down the write side and signals an EOF condition to the
		860	the peer.
		861
		862	You can rely on the normal read queue and C<on_eof> handling
		863	afterwards. This is the cleanest way to close a connection.
		864
		865	=cut
		866
		867	sub push_shutdown {
		868	my ($self) = @_;
		869
		870	delete $self->{low_water_mark};
		871	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		872	}
		873
373	=item AnyEvent::Handle::register_write_type type => $coderef->($self, @args)	874	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
374		875
375	This function (not method) lets you add your own types to C<push_write>.	876	This function (not method) lets you add your own types to C<push_write>.
376	Whenever the given C<type> is used, C<push_write> will invoke the code	877	Whenever the given C<type> is used, C<push_write> will invoke the code
377	reference with the handle object and the remaining arguments.	878	reference with the handle object and the remaining arguments.
378		879
…		…
397	ways, the "simple" way, using only C<on_read> and the "complex" way, using	898	ways, the "simple" way, using only C<on_read> and the "complex" way, using
398	a queue.	899	a queue.
399		900
400	In the simple case, you just install an C<on_read> callback and whenever	901	In the simple case, you just install an C<on_read> callback and whenever
401	new data arrives, it will be called. You can then remove some data (if	902	new data arrives, it will be called. You can then remove some data (if
402	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	903	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
403	or not.	904	leave the data there if you want to accumulate more (e.g. when only a
		905	partial message has been received so far).
404		906
405	In the more complex case, you want to queue multiple callbacks. In this	907	In the more complex case, you want to queue multiple callbacks. In this
406	case, AnyEvent::Handle will call the first queued callback each time new	908	case, AnyEvent::Handle will call the first queued callback each time new
407	data arrives and removes it when it has done its job (see C<push_read>,	909	data arrives (also the first time it is queued) and removes it when it has
408	below).	910	done its job (see C<push_read>, below).
409		911
410	This way you can, for example, push three line-reads, followed by reading	912	This way you can, for example, push three line-reads, followed by reading
411	a chunk of data, and AnyEvent::Handle will execute them in order.	913	a chunk of data, and AnyEvent::Handle will execute them in order.
412		914
413	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	915	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
414	the specified number of bytes which give an XML datagram.	916	the specified number of bytes which give an XML datagram.
415		917
416	# in the default state, expect some header bytes	918	# in the default state, expect some header bytes
417	$handle->on_read (sub {	919	$handle->on_read (sub {
418	# some data is here, now queue the length-header-read (4 octets)	920	# some data is here, now queue the length-header-read (4 octets)
419	shift->unshift_read_chunk (4, sub {	921	shift->unshift_read (chunk => 4, sub {
420	# header arrived, decode	922	# header arrived, decode
421	my $len = unpack "N", $_[1];	923	my $len = unpack "N", $_[1];
422		924
423	# now read the payload	925	# now read the payload
424	shift->unshift_read_chunk ($len, sub {	926	shift->unshift_read (chunk => $len, sub {
425	my $xml = $_[1];	927	my $xml = $_[1];
426	# handle xml	928	# handle xml
427	});	929	});
428	});	930	});
429	});	931	});
430		932
431	Example 2: Implement a client for a protocol that replies either with	933	Example 2: Implement a client for a protocol that replies either with "OK"
432	"OK" and another line or "ERROR" for one request, and 64 bytes for the	934	and another line or "ERROR" for the first request that is sent, and 64
433	second request. Due tot he availability of a full queue, we can just	935	bytes for the second request. Due to the availability of a queue, we can
434	pipeline sending both requests and manipulate the queue as necessary in	936	just pipeline sending both requests and manipulate the queue as necessary
435	the callbacks:	937	in the callbacks.
436		938
437	# request one	939	When the first callback is called and sees an "OK" response, it will
		940	C<unshift> another line-read. This line-read will be queued I<before> the
		941	64-byte chunk callback.
		942
		943	# request one, returns either "OK + extra line" or "ERROR"
438	$handle->push_write ("request 1\015\012");	944	$handle->push_write ("request 1\015\012");
439		945
440	# we expect "ERROR" or "OK" as response, so push a line read	946	# we expect "ERROR" or "OK" as response, so push a line read
441	$handle->push_read_line (sub {	947	$handle->push_read (line => sub {
442	# if we got an "OK", we have to _prepend_ another line,	948	# if we got an "OK", we have to _prepend_ another line,
443	# so it will be read before the second request reads its 64 bytes	949	# so it will be read before the second request reads its 64 bytes
444	# which are already in the queue when this callback is called	950	# which are already in the queue when this callback is called
445	# we don't do this in case we got an error	951	# we don't do this in case we got an error
446	if ($_[1] eq "OK") {	952	if ($_[1] eq "OK") {
447	$_[0]->unshift_read_line (sub {	953	$_[0]->unshift_read (line => sub {
448	my $response = $_[1];	954	my $response = $_[1];
449	...	955	...
450	});	956	});
451	}	957	}
452	});	958	});
453		959
454	# request two	960	# request two, simply returns 64 octets
455	$handle->push_write ("request 2\015\012");	961	$handle->push_write ("request 2\015\012");
456		962
457	# simply read 64 bytes, always	963	# simply read 64 bytes, always
458	$handle->push_read_chunk (64, sub {	964	$handle->push_read (chunk => 64, sub {
459	my $response = $_[1];	965	my $response = $_[1];
460	...	966	...
461	});	967	});
462		968
463	=over 4	969	=over 4
464		970
465	=cut	971	=cut
466		972
467	sub _drain_rbuf {	973	sub _drain_rbuf {
468	my ($self) = @_;	974	my ($self) = @_;
		975
		976	# avoid recursion
		977	return if exists $self->{_skip_drain_rbuf};
		978	local $self->{_skip_drain_rbuf} = 1;
469		979
470	if (	980	if (
471	defined $self->{rbuf_max}	981	defined $self->{rbuf_max}
472	&& $self->{rbuf_max} < length $self->{rbuf}	982	&& $self->{rbuf_max} < length $self->{rbuf}
473	) {	983	) {
474	$! = &Errno::ENOSPC; return $self->error;	984	$self->_error (Errno::ENOSPC, 1), return;
475	}	985	}
476		986
477	return if $self->{in_drain};	987	while () {
478	local $self->{in_drain} = 1;	988	# we need to use a separate tls read buffer, as we must not receive data while
		989	# we are draining the buffer, and this can only happen with TLS.
		990	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};
479		991
480	while (my $len = length $self->{rbuf}) {	992	my $len = length $self->{rbuf};
481	no strict 'refs';	993
482	if (my $cb = shift @{ $self->{queue} }) {	994	if (my $cb = shift @{ $self->{_queue} }) {
483	unless ($cb->($self)) {	995	unless ($cb->($self)) {
484	if ($self->{eof}) {	996	if ($self->{_eof}) {
485	# no progress can be made (not enough data and no data forthcoming)	997	# no progress can be made (not enough data and no data forthcoming)
486	$! = &Errno::EPIPE; return $self->error;	998	$self->_error (Errno::EPIPE, 1), return;
487	}	999	}
488		1000
489	unshift @{ $self->{queue} }, $cb;	1001	unshift @{ $self->{_queue} }, $cb;
490	return;	1002	last;
491	}	1003	}
492	} elsif ($self->{on_read}) {	1004	} elsif ($self->{on_read}) {
		1005	last unless $len;
		1006
493	$self->{on_read}($self);	1007	$self->{on_read}($self);
494		1008
495	if (	1009	if (
496	$self->{eof} # if no further data will arrive
497	&& $len == length $self->{rbuf} # and no data has been consumed	1010	$len == length $self->{rbuf} # if no data has been consumed
498	&& !@{ $self->{queue} } # and the queue is still empty	1011	&& !@{ $self->{_queue} } # and the queue is still empty
499	&& $self->{on_read} # and we still want to read data	1012	&& $self->{on_read} # but we still have on_read
500	) {	1013	) {
		1014	# no further data will arrive
501	# then no progress can be made	1015	# so no progress can be made
502	$! = &Errno::EPIPE; return $self->error;	1016	$self->_error (Errno::EPIPE, 1), return
		1017	if $self->{_eof};
		1018
		1019	last; # more data might arrive
503	}	1020	}
504	} else {	1021	} else {
505	# read side becomes idle	1022	# read side becomes idle
506	delete $self->{rw};	1023	delete $self->{_rw} unless $self->{tls};
507	return;	1024	last;
508	}	1025	}
509	}	1026	}
510		1027
511	if ($self->{eof}) {	1028	if ($self->{_eof}) {
512	$self->_shutdown;	1029	if ($self->{on_eof}) {
513	$self->{on_eof}($self)	1030	$self->{on_eof}($self)
514	if $self->{on_eof};	1031	} else {
		1032	$self->_error (0, 1, "Unexpected end-of-file");
		1033	}
		1034	}
		1035
		1036	# may need to restart read watcher
		1037	unless ($self->{_rw}) {
		1038	$self->start_read
		1039	if $self->{on_read} || @{ $self->{_queue} };
515	}	1040	}
516	}	1041	}
517		1042
518	=item $handle->on_read ($cb)	1043	=item $handle->on_read ($cb)
519		1044
…		…
525		1050
526	sub on_read {	1051	sub on_read {
527	my ($self, $cb) = @_;	1052	my ($self, $cb) = @_;
528		1053
529	$self->{on_read} = $cb;	1054	$self->{on_read} = $cb;
		1055	$self->_drain_rbuf if $cb;
530	}	1056	}
531		1057
532	=item $handle->rbuf	1058	=item $handle->rbuf
533		1059
534	Returns the read buffer (as a modifiable lvalue).	1060	Returns the read buffer (as a modifiable lvalue).
535		1061
536	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1062	You can access the read buffer directly as the C<< ->{rbuf} >>
537	you want.	1063	member, if you want. However, the only operation allowed on the
		1064	read buffer (apart from looking at it) is removing data from its
		1065	beginning. Otherwise modifying or appending to it is not allowed and will
		1066	lead to hard-to-track-down bugs.
538		1067
539	NOTE: The read buffer should only be used or modified if the C<on_read>,	1068	NOTE: The read buffer should only be used or modified if the C<on_read>,
540	C<push_read> or C<unshift_read> methods are used. The other read methods	1069	C<push_read> or C<unshift_read> methods are used. The other read methods
541	automatically manage the read buffer.	1070	automatically manage the read buffer.
542		1071
…		…
582		1111
583	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1112	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
584	->($self, $cb, @_);	1113	->($self, $cb, @_);
585	}	1114	}
586		1115
587	push @{ $self->{queue} }, $cb;	1116	push @{ $self->{_queue} }, $cb;
588	$self->_drain_rbuf;	1117	$self->_drain_rbuf;
589	}	1118	}
590		1119
591	sub unshift_read {	1120	sub unshift_read {
592	my $self = shift;	1121	my $self = shift;
…		…
598	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1127	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
599	->($self, $cb, @_);	1128	->($self, $cb, @_);
600	}	1129	}
601		1130
602		1131
603	unshift @{ $self->{queue} }, $cb;	1132	unshift @{ $self->{_queue} }, $cb;
604	$self->_drain_rbuf;	1133	$self->_drain_rbuf;
605	}	1134	}
606		1135
607	=item $handle->push_read (type => @args, $cb)	1136	=item $handle->push_read (type => @args, $cb)
608		1137
…		…
615	Predefined types are (if you have ideas for additional types, feel free to	1144	Predefined types are (if you have ideas for additional types, feel free to
616	drop by and tell us):	1145	drop by and tell us):
617		1146
618	=over 4	1147	=over 4
619		1148
620	=item chunk => $octets, $cb->($self, $data)	1149	=item chunk => $octets, $cb->($handle, $data)
621		1150
622	Invoke the callback only once C<$octets> bytes have been read. Pass the	1151	Invoke the callback only once C<$octets> bytes have been read. Pass the
623	data read to the callback. The callback will never be called with less	1152	data read to the callback. The callback will never be called with less
624	data.	1153	data.
625		1154
…		…
639	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1168	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
640	1	1169	1
641	}	1170	}
642	};	1171	};
643		1172
644	# compatibility with older API
645	sub push_read_chunk {
646	$_[0]->push_read (chunk => $_[1], $_[2]);
647	}
648
649	sub unshift_read_chunk {
650	$_[0]->unshift_read (chunk => $_[1], $_[2]);
651	}
652
653	=item line => [$eol, ]$cb->($self, $line, $eol)	1173	=item line => [$eol, ]$cb->($handle, $line, $eol)
654		1174
655	The callback will be called only once a full line (including the end of	1175	The callback will be called only once a full line (including the end of
656	line marker, C<$eol>) has been read. This line (excluding the end of line	1176	line marker, C<$eol>) has been read. This line (excluding the end of line
657	marker) will be passed to the callback as second argument (C<$line>), and	1177	marker) will be passed to the callback as second argument (C<$line>), and
658	the end of line marker as the third argument (C<$eol>).	1178	the end of line marker as the third argument (C<$eol>).
…		…
672	=cut	1192	=cut
673		1193
674	register_read_type line => sub {	1194	register_read_type line => sub {
675	my ($self, $cb, $eol) = @_;	1195	my ($self, $cb, $eol) = @_;
676		1196
677	$eol = qr|(\015?\012)| if @_ < 3;	1197	if (@_ < 3) {
		1198	# this is more than twice as fast as the generic code below
		1199	sub {
		1200	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
		1201
		1202	$cb->($_[0], $1, $2);
		1203	1
		1204	}
		1205	} else {
678	$eol = quotemeta $eol unless ref $eol;	1206	$eol = quotemeta $eol unless ref $eol;
679	$eol = qr|^(.*?)($eol)|s;	1207	$eol = qr|^(.*?)($eol)|s;
		1208
		1209	sub {
		1210	$_[0]{rbuf} =~ s/$eol// or return;
		1211
		1212	$cb->($_[0], $1, $2);
		1213	1
		1214	}
		1215	}
		1216	};
		1217
		1218	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
		1219
		1220	Makes a regex match against the regex object C<$accept> and returns
		1221	everything up to and including the match.
		1222
		1223	Example: read a single line terminated by '\n'.
		1224
		1225	$handle->push_read (regex => qr<\n>, sub { ... });
		1226
		1227	If C<$reject> is given and not undef, then it determines when the data is
		1228	to be rejected: it is matched against the data when the C<$accept> regex
		1229	does not match and generates an C<EBADMSG> error when it matches. This is
		1230	useful to quickly reject wrong data (to avoid waiting for a timeout or a
		1231	receive buffer overflow).
		1232
		1233	Example: expect a single decimal number followed by whitespace, reject
		1234	anything else (not the use of an anchor).
		1235
		1236	$handle->push_read (regex => qr<^[0-9]+\s>, qr<[^0-9]>, sub { ... });
		1237
		1238	If C<$skip> is given and not C<undef>, then it will be matched against
		1239	the receive buffer when neither C<$accept> nor C<$reject> match,
		1240	and everything preceding and including the match will be accepted
		1241	unconditionally. This is useful to skip large amounts of data that you
		1242	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
		1243	have to start matching from the beginning. This is purely an optimisation
		1244	and is usually worth only when you expect more than a few kilobytes.
		1245
		1246	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
		1247	expect the header to be very large (it isn't in practise, but...), we use
		1248	a skip regex to skip initial portions. The skip regex is tricky in that
		1249	it only accepts something not ending in either \015 or \012, as these are
		1250	required for the accept regex.
		1251
		1252	$handle->push_read (regex =>
		1253	qr<\015\012\015\012>,
		1254	undef, # no reject
		1255	qr<^.*[^\015\012]>,
		1256	sub { ... });
		1257
		1258	=cut
		1259
		1260	register_read_type regex => sub {
		1261	my ($self, $cb, $accept, $reject, $skip) = @_;
		1262
		1263	my $data;
		1264	my $rbuf = \$self->{rbuf};
680		1265
681	sub {	1266	sub {
682	$_[0]{rbuf} =~ s/$eol// or return;	1267	# accept
683		1268	if ($$rbuf =~ $accept) {
684	$cb->($_[0], $1, $2);	1269	$data .= substr $$rbuf, 0, $+[0], "";
		1270	$cb->($self, $data);
		1271	return 1;
		1272	}
685	1	1273
		1274	# reject
		1275	if ($reject && $$rbuf =~ $reject) {
		1276	$self->_error (Errno::EBADMSG);
		1277	}
		1278
		1279	# skip
		1280	if ($skip && $$rbuf =~ $skip) {
		1281	$data .= substr $$rbuf, 0, $+[0], "";
		1282	}
		1283
		1284	()
686	}	1285	}
687	};	1286	};
688		1287
689	# compatibility with older API
690	sub push_read_line {
691	my $self = shift;
692	$self->push_read (line => @_);
693	}
694
695	sub unshift_read_line {
696	my $self = shift;
697	$self->unshift_read (line => @_);
698	}
699
700	=item netstring => $cb->($string)	1288	=item netstring => $cb->($handle, $string)
701		1289
702	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).	1290	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
703		1291
704	Throws an error with C<$!> set to EBADMSG on format violations.	1292	Throws an error with C<$!> set to EBADMSG on format violations.
705		1293
…		…
709	my ($self, $cb) = @_;	1297	my ($self, $cb) = @_;
710		1298
711	sub {	1299	sub {
712	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1300	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
713	if ($_[0]{rbuf} =~ /[^0-9]/) {	1301	if ($_[0]{rbuf} =~ /[^0-9]/) {
714	$! = &Errno::EBADMSG;	1302	$self->_error (Errno::EBADMSG);
715	$self->error;
716	}	1303	}
717	return;	1304	return;
718	}	1305	}
719		1306
720	my $len = $1;	1307	my $len = $1;
…		…
723	my $string = $_[1];	1310	my $string = $_[1];
724	$_[0]->unshift_read (chunk => 1, sub {	1311	$_[0]->unshift_read (chunk => 1, sub {
725	if ($_[1] eq ",") {	1312	if ($_[1] eq ",") {
726	$cb->($_[0], $string);	1313	$cb->($_[0], $string);
727	} else {	1314	} else {
728	$! = &Errno::EBADMSG;
729	$self->error;	1315	$self->_error (Errno::EBADMSG);
730	}	1316	}
731	});	1317	});
732	});	1318	});
733		1319
734	1	1320	1
735	}	1321	}
736	};	1322	};
737		1323
		1324	=item packstring => $format, $cb->($handle, $string)
		1325
		1326	An octet string prefixed with an encoded length. The encoding C<$format>
		1327	uses the same format as a Perl C<pack> format, but must specify a single
		1328	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1329	optional C<!>, C<< < >> or C<< > >> modifier).
		1330
		1331	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1332	EPP uses a prefix of C<N> (4 octtes).
		1333
		1334	Example: read a block of data prefixed by its length in BER-encoded
		1335	format (very efficient).
		1336
		1337	$handle->push_read (packstring => "w", sub {
		1338	my ($handle, $data) = @_;
		1339	});
		1340
		1341	=cut
		1342
		1343	register_read_type packstring => sub {
		1344	my ($self, $cb, $format) = @_;
		1345
		1346	sub {
		1347	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1348	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
		1349	or return;
		1350
		1351	$format = length pack $format, $len;
		1352
		1353	# bypass unshift if we already have the remaining chunk
		1354	if ($format + $len <= length $_[0]{rbuf}) {
		1355	my $data = substr $_[0]{rbuf}, $format, $len;
		1356	substr $_[0]{rbuf}, 0, $format + $len, "";
		1357	$cb->($_[0], $data);
		1358	} else {
		1359	# remove prefix
		1360	substr $_[0]{rbuf}, 0, $format, "";
		1361
		1362	# read remaining chunk
		1363	$_[0]->unshift_read (chunk => $len, $cb);
		1364	}
		1365
		1366	1
		1367	}
		1368	};
		1369
		1370	=item json => $cb->($handle, $hash_or_arrayref)
		1371
		1372	Reads a JSON object or array, decodes it and passes it to the
		1373	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
		1374
		1375	If a C<json> object was passed to the constructor, then that will be used
		1376	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
		1377
		1378	This read type uses the incremental parser available with JSON version
		1379	2.09 (and JSON::XS version 2.2) and above. You have to provide a
		1380	dependency on your own: this module will load the JSON module, but
		1381	AnyEvent does not depend on it itself.
		1382
		1383	Since JSON texts are fully self-delimiting, the C<json> read and write
		1384	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
		1385	the C<json> write type description, above, for an actual example.
		1386
		1387	=cut
		1388
		1389	register_read_type json => sub {
		1390	my ($self, $cb) = @_;
		1391
		1392	my $json = $self->{json} ||=
		1393	eval { require JSON::XS; JSON::XS->new->utf8 }
		1394	|| do { require JSON; JSON->new->utf8 };
		1395
		1396	my $data;
		1397	my $rbuf = \$self->{rbuf};
		1398
		1399	sub {
		1400	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
		1401
		1402	if ($ref) {
		1403	$self->{rbuf} = $json->incr_text;
		1404	$json->incr_text = "";
		1405	$cb->($self, $ref);
		1406
		1407	1
		1408	} elsif ($@) {
		1409	# error case
		1410	$json->incr_skip;
		1411
		1412	$self->{rbuf} = $json->incr_text;
		1413	$json->incr_text = "";
		1414
		1415	$self->_error (Errno::EBADMSG);
		1416
		1417	()
		1418	} else {
		1419	$self->{rbuf} = "";
		1420
		1421	()
		1422	}
		1423	}
		1424	};
		1425
		1426	=item storable => $cb->($handle, $ref)
		1427
		1428	Deserialises a L<Storable> frozen representation as written by the
		1429	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1430	data).
		1431
		1432	Raises C<EBADMSG> error if the data could not be decoded.
		1433
		1434	=cut
		1435
		1436	register_read_type storable => sub {
		1437	my ($self, $cb) = @_;
		1438
		1439	require Storable;
		1440
		1441	sub {
		1442	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1443	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
		1444	or return;
		1445
		1446	my $format = length pack "w", $len;
		1447
		1448	# bypass unshift if we already have the remaining chunk
		1449	if ($format + $len <= length $_[0]{rbuf}) {
		1450	my $data = substr $_[0]{rbuf}, $format, $len;
		1451	substr $_[0]{rbuf}, 0, $format + $len, "";
		1452	$cb->($_[0], Storable::thaw ($data));
		1453	} else {
		1454	# remove prefix
		1455	substr $_[0]{rbuf}, 0, $format, "";
		1456
		1457	# read remaining chunk
		1458	$_[0]->unshift_read (chunk => $len, sub {
		1459	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1460	$cb->($_[0], $ref);
		1461	} else {
		1462	$self->_error (Errno::EBADMSG);
		1463	}
		1464	});
		1465	}
		1466
		1467	1
		1468	}
		1469	};
		1470
738	=back	1471	=back
739		1472
740	=item AnyEvent::Handle::register_read_type type => $coderef->($self, $cb, @args)	1473	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)
741		1474
742	This function (not method) lets you add your own types to C<push_read>.	1475	This function (not method) lets you add your own types to C<push_read>.
743		1476
744	Whenever the given C<type> is used, C<push_read> will invoke the code	1477	Whenever the given C<type> is used, C<push_read> will invoke the code
745	reference with the handle object, the callback and the remaining	1478	reference with the handle object, the callback and the remaining
…		…
747		1480
748	The code reference is supposed to return a callback (usually a closure)	1481	The code reference is supposed to return a callback (usually a closure)
749	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1482	that works as a plain read callback (see C<< ->push_read ($cb) >>).
750		1483
751	It should invoke the passed callback when it is done reading (remember to	1484	It should invoke the passed callback when it is done reading (remember to
752	pass C<$self> as first argument as all other callbacks do that).	1485	pass C<$handle> as first argument as all other callbacks do that).
753		1486
754	Note that this is a function, and all types registered this way will be	1487	Note that this is a function, and all types registered this way will be
755	global, so try to use unique names.	1488	global, so try to use unique names.
756		1489
757	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1490	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,
…		…
760	=item $handle->stop_read	1493	=item $handle->stop_read
761		1494
762	=item $handle->start_read	1495	=item $handle->start_read
763		1496
764	In rare cases you actually do not want to read anything from the	1497	In rare cases you actually do not want to read anything from the
765	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1498	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
766	any queued callbacks will be executed then. To start reading again, call	1499	any queued callbacks will be executed then. To start reading again, call
767	C<start_read>.	1500	C<start_read>.
768		1501
		1502	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1503	you change the C<on_read> callback or push/unshift a read callback, and it
		1504	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1505	there are any read requests in the queue.
		1506
		1507	These methods will have no effect when in TLS mode (as TLS doesn't support
		1508	half-duplex connections).
		1509
769	=cut	1510	=cut
770		1511
771	sub stop_read {	1512	sub stop_read {
772	my ($self) = @_;	1513	my ($self) = @_;
773		1514
774	delete $self->{rw};	1515	delete $self->{_rw} unless $self->{tls};
775	}	1516	}
776		1517
777	sub start_read {	1518	sub start_read {
778	my ($self) = @_;	1519	my ($self) = @_;
779		1520
780	unless ($self->{rw} || $self->{eof}) {	1521	unless ($self->{_rw} || $self->{_eof}) {
781	Scalar::Util::weaken $self;	1522	Scalar::Util::weaken $self;
782		1523
783	$self->{rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1524	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
784	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1525	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
785	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1526	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
786		1527
787	if ($len > 0) {	1528	if ($len > 0) {
788	$self->{filter_r}	1529	$self->{_activity} = AnyEvent->now;
789	? $self->{filter_r}->($self, $rbuf)	1530
		1531	if ($self->{tls}) {
		1532	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
		1533
		1534	&_dotls ($self);
		1535	} else {
790	: $self->_drain_rbuf;	1536	$self->_drain_rbuf;
		1537	}
791		1538
792	} elsif (defined $len) {	1539	} elsif (defined $len) {
793	delete $self->{rw};	1540	delete $self->{_rw};
794	$self->{eof} = 1;	1541	$self->{_eof} = 1;
795	$self->_drain_rbuf;	1542	$self->_drain_rbuf;
796		1543
797	} elsif ($! != EAGAIN && $! != EINTR && $! != &AnyEvent::Util::WSAWOULDBLOCK) {	1544	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
798	return $self->error;	1545	return $self->_error ($!, 1);
799	}	1546	}
800	});	1547	});
801	}	1548	}
802	}	1549	}
803		1550
		1551	our $ERROR_SYSCALL;
		1552	our $ERROR_WANT_READ;
		1553
		1554	sub _tls_error {
		1555	my ($self, $err) = @_;
		1556
		1557	return $self->_error ($!, 1)
		1558	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1559
		1560	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1561
		1562	# reduce error string to look less scary
		1563	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1564
		1565	if ($self->{_on_starttls}) {
		1566	(delete $self->{_on_starttls})->($self, undef, $err);
		1567	&_freetls;
		1568	} else {
		1569	&_freetls;
		1570	$self->_error (Errno::EPROTO, 1, $err);
		1571	}
		1572	}
		1573
		1574	# poll the write BIO and send the data if applicable
		1575	# also decode read data if possible
		1576	# this is basiclaly our TLS state machine
		1577	# more efficient implementations are possible with openssl,
		1578	# but not with the buggy and incomplete Net::SSLeay.
804	sub _dotls {	1579	sub _dotls {
805	my ($self) = @_;	1580	my ($self) = @_;
806		1581
		1582	my $tmp;
		1583
807	if (length $self->{tls_wbuf}) {	1584	if (length $self->{_tls_wbuf}) {
808	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{tls_wbuf})) > 0) {	1585	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
809	substr $self->{tls_wbuf}, 0, $len, "";	1586	substr $self->{_tls_wbuf}, 0, $tmp, "";
810	}	1587	}
811	}
812		1588
		1589	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1590	return $self->_tls_error ($tmp)
		1591	if $tmp != $ERROR_WANT_READ
		1592	&& ($tmp != $ERROR_SYSCALL || $!);
		1593	}
		1594
813	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{tls_wbio}))) {	1595	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1596	unless (length $tmp) {
		1597	$self->{_on_starttls}
		1598	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1599	&_freetls;
		1600
		1601	if ($self->{on_stoptls}) {
		1602	$self->{on_stoptls}($self);
		1603	return;
		1604	} else {
		1605	# let's treat SSL-eof as we treat normal EOF
		1606	delete $self->{_rw};
		1607	$self->{_eof} = 1;
		1608	}
		1609	}
		1610
		1611	$self->{_tls_rbuf} .= $tmp;
		1612	$self->_drain_rbuf;
		1613	$self->{tls} or return; # tls session might have gone away in callback
		1614	}
		1615
		1616	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1617	return $self->_tls_error ($tmp)
		1618	if $tmp != $ERROR_WANT_READ
		1619	&& ($tmp != $ERROR_SYSCALL || $!);
		1620
		1621	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
814	$self->{wbuf} .= $buf;	1622	$self->{wbuf} .= $tmp;
815	$self->_drain_wbuf;	1623	$self->_drain_wbuf;
816	}	1624	}
817		1625
818	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {	1626	$self->{_on_starttls}
819	$self->{rbuf} .= $buf;	1627	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
820	$self->_drain_rbuf;	1628	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
821	}
822
823	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
824
825	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
826	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
827	$self->error;
828	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
829	$! = &Errno::EIO;
830	$self->error;
831	}
832
833	# all others are fine for our purposes
834	}
835	}	1629	}
836		1630
837	=item $handle->starttls ($tls[, $tls_ctx])	1631	=item $handle->starttls ($tls[, $tls_ctx])
838		1632
839	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1633	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
840	object is created, you can also do that at a later time by calling	1634	object is created, you can also do that at a later time by calling
841	C<starttls>.	1635	C<starttls>.
842		1636
		1637	Starting TLS is currently an asynchronous operation - when you push some
		1638	write data and then call C<< ->starttls >> then TLS negotiation will start
		1639	immediately, after which the queued write data is then sent.
		1640
843	The first argument is the same as the C<tls> constructor argument (either	1641	The first argument is the same as the C<tls> constructor argument (either
844	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1642	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
845		1643
846	The second argument is the optional C<Net::SSLeay::CTX> object that is	1644	The second argument is the optional C<AnyEvent::TLS> object that is used
847	used when AnyEvent::Handle has to create its own TLS connection object.	1645	when AnyEvent::Handle has to create its own TLS connection object, or
		1646	a hash reference with C<< key => value >> pairs that will be used to
		1647	construct a new context.
848		1648
849	=cut	1649	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
		1650	context in C<< $handle->{tls_ctx} >> after this call and can be used or
		1651	changed to your liking. Note that the handshake might have already started
		1652	when this function returns.
850		1653
851	# TODO: maybe document...	1654	If it an error to start a TLS handshake more than once per
		1655	AnyEvent::Handle object (this is due to bugs in OpenSSL).
		1656
		1657	=cut
		1658
		1659	our %TLS_CACHE; #TODO not yet documented, should we?
		1660
852	sub starttls {	1661	sub starttls {
853	my ($self, $ssl, $ctx) = @_;	1662	my ($self, $ssl, $ctx) = @_;
854		1663
855	$self->stoptls;	1664	require Net::SSLeay;
856		1665
857	if ($ssl eq "accept") {	1666	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"
858	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1667	if $self->{tls};
859	Net::SSLeay::set_accept_state ($ssl);	1668
860	} elsif ($ssl eq "connect") {	1669	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
861	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1670	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
862	Net::SSLeay::set_connect_state ($ssl);	1671
		1672	$ctx ||= $self->{tls_ctx};
		1673
		1674	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1675
		1676	if ("HASH" eq ref $ctx) {
		1677	require AnyEvent::TLS;
		1678
		1679	if ($ctx->{cache}) {
		1680	my $key = $ctx+0;
		1681	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1682	} else {
		1683	$ctx = new AnyEvent::TLS %$ctx;
		1684	}
		1685	}
863	}	1686
864		1687	$self->{tls_ctx} = $ctx || TLS_CTX ();
865	$self->{tls} = $ssl;	1688	$self->{tls} = $ssl = $self->{tls_ctx}->_get_session ($ssl, $self, $self->{peername});
866		1689
867	# basically, this is deep magic (because SSL_read should have the same issues)	1690	# basically, this is deep magic (because SSL_read should have the same issues)
868	# but the openssl maintainers basically said: "trust us, it just works".	1691	# but the openssl maintainers basically said: "trust us, it just works".
869	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1692	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
870	# and mismaintained ssleay-module doesn't even offer them).	1693	# and mismaintained ssleay-module doesn't even offer them).
871	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1694	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1695	#
		1696	# in short: this is a mess.
		1697	#
		1698	# note that we do not try to keep the length constant between writes as we are required to do.
		1699	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1700	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1701	# have identity issues in that area.
872	Net::SSLeay::CTX_set_mode ($self->{tls},	1702	# Net::SSLeay::CTX_set_mode ($ssl,
873	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1703	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
874	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1704	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1705	Net::SSLeay::CTX_set_mode ($ssl, 1|2);
875		1706
876	$self->{tls_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1707	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
877	$self->{tls_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1708	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
878		1709
879	Net::SSLeay::set_bio ($ssl, $self->{tls_rbio}, $self->{tls_wbio});	1710	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});
880		1711
881	$self->{filter_w} = sub {	1712	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
882	$_[0]{tls_wbuf} .= ${$_[1]};	1713	if $self->{on_starttls};
883	&_dotls;	1714
884	};	1715	&_dotls; # need to trigger the initial handshake
885	$self->{filter_r} = sub {	1716	$self->start_read; # make sure we actually do read
886	Net::SSLeay::BIO_write ($_[0]{tls_rbio}, ${$_[1]});
887	&_dotls;
888	};
889	}	1717	}
890		1718
891	=item $handle->stoptls	1719	=item $handle->stoptls
892		1720
893	Destroys the SSL connection, if any. Partial read or write data will be	1721	Shuts down the SSL connection - this makes a proper EOF handshake by
894	lost.	1722	sending a close notify to the other side, but since OpenSSL doesn't
		1723	support non-blocking shut downs, it is not possible to re-use the stream
		1724	afterwards.
895		1725
896	=cut	1726	=cut
897		1727
898	sub stoptls {	1728	sub stoptls {
899	my ($self) = @_;	1729	my ($self) = @_;
900		1730
901	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1731	if ($self->{tls}) {
902	delete $self->{tls_rbio};	1732	Net::SSLeay::shutdown ($self->{tls});
903	delete $self->{tls_wbio};	1733
904	delete $self->{tls_wbuf};	1734	&_dotls;
905	delete $self->{filter_r};	1735
906	delete $self->{filter_w};	1736	# # we don't give a shit. no, we do, but we can't. no...#d#
		1737	# # we, we... have to use openssl :/#d#
		1738	# &_freetls;#d#
		1739	}
		1740	}
		1741
		1742	sub _freetls {
		1743	my ($self) = @_;
		1744
		1745	return unless $self->{tls};
		1746
		1747	$self->{tls_ctx}->_put_session (delete $self->{tls});
		1748
		1749	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
907	}	1750	}
908		1751
909	sub DESTROY {	1752	sub DESTROY {
910	my $self = shift;	1753	my ($self) = @_;
911		1754
912	$self->stoptls;	1755	&_freetls;
		1756
		1757	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1758
		1759	if ($linger && length $self->{wbuf} && $self->{fh}) {
		1760	my $fh = delete $self->{fh};
		1761	my $wbuf = delete $self->{wbuf};
		1762
		1763	my @linger;
		1764
		1765	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {
		1766	my $len = syswrite $fh, $wbuf, length $wbuf;
		1767
		1768	if ($len > 0) {
		1769	substr $wbuf, 0, $len, "";
		1770	} else {
		1771	@linger = (); # end
		1772	}
		1773	});
		1774	push @linger, AnyEvent->timer (after => $linger, cb => sub {
		1775	@linger = ();
		1776	});
		1777	}
		1778	}
		1779
		1780	=item $handle->destroy
		1781
		1782	Shuts down the handle object as much as possible - this call ensures that
		1783	no further callbacks will be invoked and as many resources as possible
		1784	will be freed. You must not call any methods on the object afterwards.
		1785
		1786	Normally, you can just "forget" any references to an AnyEvent::Handle
		1787	object and it will simply shut down. This works in fatal error and EOF
		1788	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1789	callback, so when you want to destroy the AnyEvent::Handle object from
		1790	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1791	that case.
		1792
		1793	Destroying the handle object in this way has the advantage that callbacks
		1794	will be removed as well, so if those are the only reference holders (as
		1795	is common), then one doesn't need to do anything special to break any
		1796	reference cycles.
		1797
		1798	The handle might still linger in the background and write out remaining
		1799	data, as specified by the C<linger> option, however.
		1800
		1801	=cut
		1802
		1803	sub destroy {
		1804	my ($self) = @_;
		1805
		1806	$self->DESTROY;
		1807	%$self = ();
913	}	1808	}
914		1809
915	=item AnyEvent::Handle::TLS_CTX	1810	=item AnyEvent::Handle::TLS_CTX
916		1811
917	This function creates and returns the Net::SSLeay::CTX object used by	1812	This function creates and returns the AnyEvent::TLS object used by default
918	default for TLS mode.	1813	for TLS mode.
919		1814
920	The context is created like this:	1815	The context is created by calling L<AnyEvent::TLS> without any arguments.
921
922	Net::SSLeay::load_error_strings;
923	Net::SSLeay::SSLeay_add_ssl_algorithms;
924	Net::SSLeay::randomize;
925
926	my $CTX = Net::SSLeay::CTX_new;
927
928	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
929		1816
930	=cut	1817	=cut
931		1818
932	our $TLS_CTX;	1819	our $TLS_CTX;
933		1820
934	sub TLS_CTX() {	1821	sub TLS_CTX() {
935	$TLS_CTX || do {	1822	$TLS_CTX ||= do {
936	require Net::SSLeay;	1823	require AnyEvent::TLS;
937		1824
938	Net::SSLeay::load_error_strings ();	1825	new AnyEvent::TLS
939	Net::SSLeay::SSLeay_add_ssl_algorithms ();
940	Net::SSLeay::randomize ();
941
942	$TLS_CTX = Net::SSLeay::CTX_new ();
943
944	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
945
946	$TLS_CTX
947	}	1826	}
948	}	1827	}
949		1828
950	=back	1829	=back
951		1830
		1831
		1832	=head1 NONFREQUENTLY ASKED QUESTIONS
		1833
		1834	=over 4
		1835
		1836	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1837	still get further invocations!
		1838
		1839	That's because AnyEvent::Handle keeps a reference to itself when handling
		1840	read or write callbacks.
		1841
		1842	It is only safe to "forget" the reference inside EOF or error callbacks,
		1843	from within all other callbacks, you need to explicitly call the C<<
		1844	->destroy >> method.
		1845
		1846	=item I get different callback invocations in TLS mode/Why can't I pause
		1847	reading?
		1848
		1849	Unlike, say, TCP, TLS connections do not consist of two independent
		1850	communication channels, one for each direction. Or put differently. The
		1851	read and write directions are not independent of each other: you cannot
		1852	write data unless you are also prepared to read, and vice versa.
		1853
		1854	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		1855	callback invocations when you are not expecting any read data - the reason
		1856	is that AnyEvent::Handle always reads in TLS mode.
		1857
		1858	During the connection, you have to make sure that you always have a
		1859	non-empty read-queue, or an C<on_read> watcher. At the end of the
		1860	connection (or when you no longer want to use it) you can call the
		1861	C<destroy> method.
		1862
		1863	=item How do I read data until the other side closes the connection?
		1864
		1865	If you just want to read your data into a perl scalar, the easiest way
		1866	to achieve this is by setting an C<on_read> callback that does nothing,
		1867	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		1868	will be in C<$_[0]{rbuf}>:
		1869
		1870	$handle->on_read (sub { });
		1871	$handle->on_eof (undef);
		1872	$handle->on_error (sub {
		1873	my $data = delete $_[0]{rbuf};
		1874	});
		1875
		1876	The reason to use C<on_error> is that TCP connections, due to latencies
		1877	and packets loss, might get closed quite violently with an error, when in
		1878	fact, all data has been received.
		1879
		1880	It is usually better to use acknowledgements when transferring data,
		1881	to make sure the other side hasn't just died and you got the data
		1882	intact. This is also one reason why so many internet protocols have an
		1883	explicit QUIT command.
		1884
		1885	=item I don't want to destroy the handle too early - how do I wait until
		1886	all data has been written?
		1887
		1888	After writing your last bits of data, set the C<on_drain> callback
		1889	and destroy the handle in there - with the default setting of
		1890	C<low_water_mark> this will be called precisely when all data has been
		1891	written to the socket:
		1892
		1893	$handle->push_write (...);
		1894	$handle->on_drain (sub {
		1895	warn "all data submitted to the kernel\n";
		1896	undef $handle;
		1897	});
		1898
		1899	If you just want to queue some data and then signal EOF to the other side,
		1900	consider using C<< ->push_shutdown >> instead.
		1901
		1902	=item I want to contact a TLS/SSL server, I don't care about security.
		1903
		1904	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		1905	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		1906	parameter:
		1907
		1908	tcp_connect $host, $port, sub {
		1909	my ($fh) = @_;
		1910
		1911	my $handle = new AnyEvent::Handle
		1912	fh => $fh,
		1913	tls => "connect",
		1914	on_error => sub { ... };
		1915
		1916	$handle->push_write (...);
		1917	};
		1918
		1919	=item I want to contact a TLS/SSL server, I do care about security.
		1920
		1921	Then you should additionally enable certificate verification, including
		1922	peername verification, if the protocol you use supports it (see
		1923	L<AnyEvent::TLS>, C<verify_peername>).
		1924
		1925	E.g. for HTTPS:
		1926
		1927	tcp_connect $host, $port, sub {
		1928	my ($fh) = @_;
		1929
		1930	my $handle = new AnyEvent::Handle
		1931	fh => $fh,
		1932	peername => $host,
		1933	tls => "connect",
		1934	tls_ctx => { verify => 1, verify_peername => "https" },
		1935	...
		1936
		1937	Note that you must specify the hostname you connected to (or whatever
		1938	"peername" the protocol needs) as the C<peername> argument, otherwise no
		1939	peername verification will be done.
		1940
		1941	The above will use the system-dependent default set of trusted CA
		1942	certificates. If you want to check against a specific CA, add the
		1943	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		1944
		1945	tls_ctx => {
		1946	verify => 1,
		1947	verify_peername => "https",
		1948	ca_file => "my-ca-cert.pem",
		1949	},
		1950
		1951	=item I want to create a TLS/SSL server, how do I do that?
		1952
		1953	Well, you first need to get a server certificate and key. You have
		1954	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		1955	self-signed certificate (cheap. check the search engine of your choice,
		1956	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		1957	nice program for that purpose).
		1958
		1959	Then create a file with your private key (in PEM format, see
		1960	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		1961	file should then look like this:
		1962
		1963	-----BEGIN RSA PRIVATE KEY-----
		1964	...header data
		1965	... lots of base64'y-stuff
		1966	-----END RSA PRIVATE KEY-----
		1967
		1968	-----BEGIN CERTIFICATE-----
		1969	... lots of base64'y-stuff
		1970	-----END CERTIFICATE-----
		1971
		1972	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		1973	specify this file as C<cert_file>:
		1974
		1975	tcp_server undef, $port, sub {
		1976	my ($fh) = @_;
		1977
		1978	my $handle = new AnyEvent::Handle
		1979	fh => $fh,
		1980	tls => "accept",
		1981	tls_ctx => { cert_file => "my-server-keycert.pem" },
		1982	...
		1983
		1984	When you have intermediate CA certificates that your clients might not
		1985	know about, just append them to the C<cert_file>.
		1986
		1987	=back
		1988
		1989
		1990	=head1 SUBCLASSING AnyEvent::Handle
		1991
		1992	In many cases, you might want to subclass AnyEvent::Handle.
		1993
		1994	To make this easier, a given version of AnyEvent::Handle uses these
		1995	conventions:
		1996
		1997	=over 4
		1998
		1999	=item * all constructor arguments become object members.
		2000
		2001	At least initially, when you pass a C<tls>-argument to the constructor it
		2002	will end up in C<< $handle->{tls} >>. Those members might be changed or
		2003	mutated later on (for example C<tls> will hold the TLS connection object).
		2004
		2005	=item * other object member names are prefixed with an C<_>.
		2006
		2007	All object members not explicitly documented (internal use) are prefixed
		2008	with an underscore character, so the remaining non-C<_>-namespace is free
		2009	for use for subclasses.
		2010
		2011	=item * all members not documented here and not prefixed with an underscore
		2012	are free to use in subclasses.
		2013
		2014	Of course, new versions of AnyEvent::Handle may introduce more "public"
		2015	member variables, but thats just life, at least it is documented.
		2016
		2017	=back
		2018
952	=head1 AUTHOR	2019	=head1 AUTHOR
953		2020
954	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	2021	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
955		2022
956	=cut	2023	=cut

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines