ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.83 by root, Thu Aug 21 19:11:37 2008 UTC vs.
Revision 1.178 by root, Tue Aug 11 01:15:17 2009 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.232;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	);
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	filehandles.
52	on sockets see L<AnyEvent::Util>.	37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
53		40
54	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
57		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
58	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
59	argument.	49	argument.
60		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
61	=head1 METHODS	65	=head1 METHODS
62		66
63	=over 4	67	=over 4
64		68
65	=item B<new (%args)>	69	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
66		70
67	The constructor supports these arguments (all as key => value pairs).	71	The constructor supports these arguments (all as C<< key => value >> pairs).
68		72
69	=over 4	73	=over 4
70		74
71	=item fh => $filehandle [MANDATORY]	75	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		76
73	The filehandle this L<AnyEvent::Handle> object will operate on.	77	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking mode (using	78	NOTE: The filehandle will be set to non-blocking mode (using
76	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
77	that mode.	80	that mode.
78		81
		82	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		83
		84	Try to connect to the specified host and service (port), using
		85	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		86	default C<peername>.
		87
		88	You have to specify either this parameter, or C<fh>, above.
		89
		90	It is possible to push requests on the read and write queues, and modify
		91	properties of the stream, even while AnyEvent::Handle is connecting.
		92
		93	When this parameter is specified, then the C<on_prepare>,
		94	C<on_connect_error> and C<on_connect> callbacks will be called under the
		95	appropriate circumstances:
		96
		97	=over 4
		98
79	=item on_eof => $cb->($handle)	99	=item on_prepare => $cb->($handle)
80		100
81	Set the callback to be called when an end-of-file condition is detected,	101	This (rarely used) callback is called before a new connection is
82	i.e. in the case of a socket, when the other side has closed the	102	attempted, but after the file handle has been created. It could be used to
83	connection cleanly.	103	prepare the file handle with parameters required for the actual connect
		104	(as opposed to settings that can be changed when the connection is already
		105	established).
84		106
85	For sockets, this just means that the other side has stopped sending data,	107	The return value of this callback should be the connect timeout value in
86	you can still try to write data, and, in fact, one can return from the eof	108	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
87	callback and continue writing data, as only the read part has been shut	109	timeout is to be used).
88	down.
89		110
90	While not mandatory, it is I<highly> recommended to set an eof callback,	111	=item on_connect => $cb->($handle, $host, $port, $retry->())
91	otherwise you might end up with a closed socket while you are still
92	waiting for data.
93		112
94	If an EOF condition has been detected but no C<on_eof> callback has been	113	This callback is called when a connection has been successfully established.
95	set, then a fatal error will be raised with C<$!> set to <0>.
96		114
		115	The actual numeric host and port (the socket peername) are passed as
		116	parameters, together with a retry callback.
		117
		118	When, for some reason, the handle is not acceptable, then calling
		119	C<$retry> will continue with the next conenction target (in case of
		120	multi-homed hosts or SRV records there can be multiple connection
		121	endpoints). When it is called then the read and write queues, eof status,
		122	tls status and similar properties of the handle are being reset.
		123
		124	In most cases, ignoring the C<$retry> parameter is the way to go.
		125
		126	=item on_connect_error => $cb->($handle, $message)
		127
		128	This callback is called when the conenction could not be
		129	established. C<$!> will contain the relevant error code, and C<$message> a
		130	message describing it (usually the same as C<"$!">).
		131
		132	If this callback isn't specified, then C<on_error> will be called with a
		133	fatal error instead.
		134
		135	=back
		136
97	=item on_error => $cb->($handle, $fatal)	137	=item on_error => $cb->($handle, $fatal, $message)
98		138
99	This is the error callback, which is called when, well, some error	139	This is the error callback, which is called when, well, some error
100	occured, such as not being able to resolve the hostname, failure to	140	occured, such as not being able to resolve the hostname, failure to
101	connect or a read error.	141	connect or a read error.
102		142
103	Some errors are fatal (which is indicated by C<$fatal> being true). On	143	Some errors are fatal (which is indicated by C<$fatal> being true). On
104	fatal errors the handle object will be shut down and will not be usable	144	fatal errors the handle object will be destroyed (by a call to C<< ->
105	(but you are free to look at the current C< ->rbuf >). Examples of fatal	145	destroy >>) after invoking the error callback (which means you are free to
106	errors are an EOF condition with active (but unsatisifable) read watchers	146	examine the handle object). Examples of fatal errors are an EOF condition
107	(C<EPIPE>) or I/O errors.	147	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		148	cases where the other side can close the connection at their will it is
		149	often easiest to not report C<EPIPE> errors in this callback.
		150
		151	AnyEvent::Handle tries to find an appropriate error code for you to check
		152	against, but in some cases (TLS errors), this does not work well. It is
		153	recommended to always output the C<$message> argument in human-readable
		154	error messages (it's usually the same as C<"$!">).
108		155
109	Non-fatal errors can be retried by simply returning, but it is recommended	156	Non-fatal errors can be retried by simply returning, but it is recommended
110	to simply ignore this parameter and instead abondon the handle object	157	to simply ignore this parameter and instead abondon the handle object
111	when this callback is invoked. Examples of non-fatal errors are timeouts	158	when this callback is invoked. Examples of non-fatal errors are timeouts
112	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).	159	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
113		160
114	On callback entrance, the value of C<$!> contains the operating system	161	On callback entrance, the value of C<$!> contains the operating system
115	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	162	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		163	C<EPROTO>).
116		164
117	While not mandatory, it is I<highly> recommended to set this callback, as	165	While not mandatory, it is I<highly> recommended to set this callback, as
118	you will not be notified of errors otherwise. The default simply calls	166	you will not be notified of errors otherwise. The default simply calls
119	C<croak>.	167	C<croak>.
120		168
…		…
124	and no read request is in the queue (unlike read queue callbacks, this	172	and no read request is in the queue (unlike read queue callbacks, this
125	callback will only be called when at least one octet of data is in the	173	callback will only be called when at least one octet of data is in the
126	read buffer).	174	read buffer).
127		175
128	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	176	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
129	method or access the C<$handle->{rbuf}> member directly.	177	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		178	must not enlarge or modify the read buffer, you can only remove data at
		179	the beginning from it.
130		180
131	When an EOF condition is detected then AnyEvent::Handle will first try to	181	When an EOF condition is detected then AnyEvent::Handle will first try to
132	feed all the remaining data to the queued callbacks and C<on_read> before	182	feed all the remaining data to the queued callbacks and C<on_read> before
133	calling the C<on_eof> callback. If no progress can be made, then a fatal	183	calling the C<on_eof> callback. If no progress can be made, then a fatal
134	error will be raised (with C<$!> set to C<EPIPE>).	184	error will be raised (with C<$!> set to C<EPIPE>).
		185
		186	Note that, unlike requests in the read queue, an C<on_read> callback
		187	doesn't mean you I<require> some data: if there is an EOF and there
		188	are outstanding read requests then an error will be flagged. With an
		189	C<on_read> callback, the C<on_eof> callback will be invoked.
		190
		191	=item on_eof => $cb->($handle)
		192
		193	Set the callback to be called when an end-of-file condition is detected,
		194	i.e. in the case of a socket, when the other side has closed the
		195	connection cleanly, and there are no outstanding read requests in the
		196	queue (if there are read requests, then an EOF counts as an unexpected
		197	connection close and will be flagged as an error).
		198
		199	For sockets, this just means that the other side has stopped sending data,
		200	you can still try to write data, and, in fact, one can return from the EOF
		201	callback and continue writing data, as only the read part has been shut
		202	down.
		203
		204	If an EOF condition has been detected but no C<on_eof> callback has been
		205	set, then a fatal error will be raised with C<$!> set to <0>.
135		206
136	=item on_drain => $cb->($handle)	207	=item on_drain => $cb->($handle)
137		208
138	This sets the callback that is called when the write buffer becomes empty	209	This sets the callback that is called when the write buffer becomes empty
139	(or when the callback is set and the buffer is empty already).	210	(or when the callback is set and the buffer is empty already).
…		…
146	memory and push it into the queue, but instead only read more data from	217	memory and push it into the queue, but instead only read more data from
147	the file when the write queue becomes empty.	218	the file when the write queue becomes empty.
148		219
149	=item timeout => $fractional_seconds	220	=item timeout => $fractional_seconds
150		221
		222	=item rtimeout => $fractional_seconds
		223
		224	=item wtimeout => $fractional_seconds
		225
151	If non-zero, then this enables an "inactivity" timeout: whenever this many	226	If non-zero, then these enables an "inactivity" timeout: whenever this
152	seconds pass without a successful read or write on the underlying file	227	many seconds pass without a successful read or write on the underlying
153	handle, the C<on_timeout> callback will be invoked (and if that one is	228	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
154	missing, an C<ETIMEDOUT> error will be raised).	229	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		230	error will be raised).
		231
		232	There are three variants of the timeouts that work fully independent
		233	of each other, for both read and write, just read, and just write:
		234	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		235	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		236	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
155		237
156	Note that timeout processing is also active when you currently do not have	238	Note that timeout processing is also active when you currently do not have
157	any outstanding read or write requests: If you plan to keep the connection	239	any outstanding read or write requests: If you plan to keep the connection
158	idle then you should disable the timout temporarily or ignore the timeout	240	idle then you should disable the timout temporarily or ignore the timeout
159	in the C<on_timeout> callback.	241	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		242	restart the timeout.
160		243
161	Zero (the default) disables this timeout.	244	Zero (the default) disables this timeout.
162		245
163	=item on_timeout => $cb->($handle)	246	=item on_timeout => $cb->($handle)
164		247
…		…
168		251
169	=item rbuf_max => <bytes>	252	=item rbuf_max => <bytes>
170		253
171	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	254	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
172	when the read buffer ever (strictly) exceeds this size. This is useful to	255	when the read buffer ever (strictly) exceeds this size. This is useful to
173	avoid denial-of-service attacks.	256	avoid some forms of denial-of-service attacks.
174		257
175	For example, a server accepting connections from untrusted sources should	258	For example, a server accepting connections from untrusted sources should
176	be configured to accept only so-and-so much data that it cannot act on	259	be configured to accept only so-and-so much data that it cannot act on
177	(for example, when expecting a line, an attacker could send an unlimited	260	(for example, when expecting a line, an attacker could send an unlimited
178	amount of data without a callback ever being called as long as the line	261	amount of data without a callback ever being called as long as the line
179	isn't finished).	262	isn't finished).
180		263
181	=item autocork => <boolean>	264	=item autocork => <boolean>
182		265
183	When disabled (the default), then C<push_write> will try to immediately	266	When disabled (the default), then C<push_write> will try to immediately
184	write the data to the handle if possible. This avoids having to register	267	write the data to the handle, if possible. This avoids having to register
185	a write watcher and wait for the next event loop iteration, but can be	268	a write watcher and wait for the next event loop iteration, but can
186	inefficient if you write multiple small chunks (this disadvantage is	269	be inefficient if you write multiple small chunks (on the wire, this
187	usually avoided by your kernel's nagle algorithm, see C<low_delay>).	270	disadvantage is usually avoided by your kernel's nagle algorithm, see
		271	C<no_delay>, but this option can save costly syscalls).
188		272
189	When enabled, then writes will always be queued till the next event loop	273	When enabled, then writes will always be queued till the next event loop
190	iteration. This is efficient when you do many small writes per iteration,	274	iteration. This is efficient when you do many small writes per iteration,
191	but less efficient when you do a single write only.	275	but less efficient when you do a single write only per iteration (or when
		276	the write buffer often is full). It also increases write latency.
192		277
193	=item no_delay => <boolean>	278	=item no_delay => <boolean>
194		279
195	When doing small writes on sockets, your operating system kernel might	280	When doing small writes on sockets, your operating system kernel might
196	wait a bit for more data before actually sending it out. This is called	281	wait a bit for more data before actually sending it out. This is called
197	the Nagle algorithm, and usually it is beneficial.	282	the Nagle algorithm, and usually it is beneficial.
198		283
199	In some situations you want as low a delay as possible, which cna be	284	In some situations you want as low a delay as possible, which can be
200	accomplishd by setting this option to true.	285	accomplishd by setting this option to a true value.
201		286
202	The default is your opertaing system's default behaviour, this option	287	The default is your opertaing system's default behaviour (most likely
203	explicitly enables or disables it, if possible.	288	enabled), this option explicitly enables or disables it, if possible.
204		289
205	=item read_size => <bytes>	290	=item read_size => <bytes>
206		291
207	The default read block size (the amount of bytes this module will try to read	292	The default read block size (the amount of bytes this module will
208	during each (loop iteration). Default: C<8192>.	293	try to read during each loop iteration, which affects memory
		294	requirements). Default: C<8192>.
209		295
210	=item low_water_mark => <bytes>	296	=item low_water_mark => <bytes>
211		297
212	Sets the amount of bytes (default: C<0>) that make up an "empty" write	298	Sets the amount of bytes (default: C<0>) that make up an "empty" write
213	buffer: If the write reaches this size or gets even samller it is	299	buffer: If the write reaches this size or gets even samller it is
214	considered empty.	300	considered empty.
215		301
		302	Sometimes it can be beneficial (for performance reasons) to add data to
		303	the write buffer before it is fully drained, but this is a rare case, as
		304	the operating system kernel usually buffers data as well, so the default
		305	is good in almost all cases.
		306
216	=item linger => <seconds>	307	=item linger => <seconds>
217		308
218	If non-zero (default: C<3600>), then the destructor of the	309	If non-zero (default: C<3600>), then the destructor of the
219	AnyEvent::Handle object will check wether there is still outstanding write	310	AnyEvent::Handle object will check whether there is still outstanding
220	data and will install a watcher that will write out this data. No errors	311	write data and will install a watcher that will write this data to the
221	will be reported (this mostly matches how the operating system treats	312	socket. No errors will be reported (this mostly matches how the operating
222	outstanding data at socket close time).	313	system treats outstanding data at socket close time).
223		314
224	This will not work for partial TLS data that could not yet been	315	This will not work for partial TLS data that could not be encoded
225	encoded. This data will be lost.	316	yet. This data will be lost. Calling the C<stoptls> method in time might
		317	help.
		318
		319	=item peername => $string
		320
		321	A string used to identify the remote site - usually the DNS hostname
		322	(I<not> IDN!) used to create the connection, rarely the IP address.
		323
		324	Apart from being useful in error messages, this string is also used in TLS
		325	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		326	verification will be skipped when C<peername> is not specified or
		327	C<undef>.
226		328
227	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	329	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
228		330
229	When this parameter is given, it enables TLS (SSL) mode, that means it	331	When this parameter is given, it enables TLS (SSL) mode, that means
230	will start making tls handshake and will transparently encrypt/decrypt	332	AnyEvent will start a TLS handshake as soon as the conenction has been
231	data.	333	established and will transparently encrypt/decrypt data afterwards.
		334
		335	All TLS protocol errors will be signalled as C<EPROTO>, with an
		336	appropriate error message.
232		337
233	TLS mode requires Net::SSLeay to be installed (it will be loaded	338	TLS mode requires Net::SSLeay to be installed (it will be loaded
234	automatically when you try to create a TLS handle).	339	automatically when you try to create a TLS handle): this module doesn't
		340	have a dependency on that module, so if your module requires it, you have
		341	to add the dependency yourself.
235		342
236	For the TLS server side, use C<accept>, and for the TLS client side of a	343	Unlike TCP, TLS has a server and client side: for the TLS server side, use
237	connection, use C<connect> mode.	344	C<accept>, and for the TLS client side of a connection, use C<connect>
		345	mode.
238		346
239	You can also provide your own TLS connection object, but you have	347	You can also provide your own TLS connection object, but you have
240	to make sure that you call either C<Net::SSLeay::set_connect_state>	348	to make sure that you call either C<Net::SSLeay::set_connect_state>
241	or C<Net::SSLeay::set_accept_state> on it before you pass it to	349	or C<Net::SSLeay::set_accept_state> on it before you pass it to
242	AnyEvent::Handle.	350	AnyEvent::Handle. Also, this module will take ownership of this connection
		351	object.
243		352
		353	At some future point, AnyEvent::Handle might switch to another TLS
		354	implementation, then the option to use your own session object will go
		355	away.
		356
		357	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		358	passing in the wrong integer will lead to certain crash. This most often
		359	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		360	segmentation fault.
		361
244	See the C<starttls> method if you need to start TLS negotiation later.	362	See the C<< ->starttls >> method for when need to start TLS negotiation later.
245		363
246	=item tls_ctx => $ssl_ctx	364	=item tls_ctx => $anyevent_tls
247		365
248	Use the given Net::SSLeay::CTX object to create the new TLS connection	366	Use the given C<AnyEvent::TLS> object to create the new TLS connection
249	(unless a connection object was specified directly). If this parameter is	367	(unless a connection object was specified directly). If this parameter is
250	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	368	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
251		369
		370	Instead of an object, you can also specify a hash reference with C<< key
		371	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		372	new TLS context object.
		373
		374	=item on_starttls => $cb->($handle, $success[, $error_message])
		375
		376	This callback will be invoked when the TLS/SSL handshake has finished. If
		377	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		378	(C<on_stoptls> will not be called in this case).
		379
		380	The session in C<< $handle->{tls} >> can still be examined in this
		381	callback, even when the handshake was not successful.
		382
		383	TLS handshake failures will not cause C<on_error> to be invoked when this
		384	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		385
		386	Without this callback, handshake failures lead to C<on_error> being
		387	called, as normal.
		388
		389	Note that you cannot call C<starttls> right again in this callback. If you
		390	need to do that, start an zero-second timer instead whose callback can
		391	then call C<< ->starttls >> again.
		392
		393	=item on_stoptls => $cb->($handle)
		394
		395	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		396	set, then it will be invoked after freeing the TLS session. If it is not,
		397	then a TLS shutdown condition will be treated like a normal EOF condition
		398	on the handle.
		399
		400	The session in C<< $handle->{tls} >> can still be examined in this
		401	callback.
		402
		403	This callback will only be called on TLS shutdowns, not when the
		404	underlying handle signals EOF.
		405
252	=item json => JSON or JSON::XS object	406	=item json => JSON or JSON::XS object
253		407
254	This is the json coder object used by the C<json> read and write types.	408	This is the json coder object used by the C<json> read and write types.
255		409
256	If you don't supply it, then AnyEvent::Handle will create and use a	410	If you don't supply it, then AnyEvent::Handle will create and use a
257	suitable one, which will write and expect UTF-8 encoded JSON texts.	411	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		412	texts.
258		413
259	Note that you are responsible to depend on the JSON module if you want to	414	Note that you are responsible to depend on the JSON module if you want to
260	use this functionality, as AnyEvent does not have a dependency itself.	415	use this functionality, as AnyEvent does not have a dependency itself.
261		416
262	=item filter_r => $cb
263
264	=item filter_w => $cb
265
266	These exist, but are undocumented at this time.
267
268	=back	417	=back
269		418
270	=cut	419	=cut
271		420
272	sub new {	421	sub new {
273	my $class = shift;	422	my $class = shift;
274
275	my $self = bless { @_ }, $class;	423	my $self = bless { @_ }, $class;
276		424
277	$self->{fh} or Carp::croak "mandatory argument fh is missing";	425	if ($self->{fh}) {
		426	$self->_start;
		427	return unless $self->{fh}; # could be gone by now
		428
		429	} elsif ($self->{connect}) {
		430	require AnyEvent::Socket;
		431
		432	$self->{peername} = $self->{connect}[0]
		433	unless exists $self->{peername};
		434
		435	$self->{_skip_drain_rbuf} = 1;
		436
		437	{
		438	Scalar::Util::weaken (my $self = $self);
		439
		440	$self->{_connect} =
		441	AnyEvent::Socket::tcp_connect (
		442	$self->{connect}[0],
		443	$self->{connect}[1],
		444	sub {
		445	my ($fh, $host, $port, $retry) = @_;
		446
		447	if ($fh) {
		448	$self->{fh} = $fh;
		449
		450	delete $self->{_skip_drain_rbuf};
		451	$self->_start;
		452
		453	$self->{on_connect}
		454	and $self->{on_connect}($self, $host, $port, sub {
		455	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		456	$self->{_skip_drain_rbuf} = 1;
		457	&$retry;
		458	});
		459
		460	} else {
		461	if ($self->{on_connect_error}) {
		462	$self->{on_connect_error}($self, "$!");
		463	$self->destroy;
		464	} else {
		465	$self->_error ($!, 1);
		466	}
		467	}
		468	},
		469	sub {
		470	local $self->{fh} = $_[0];
		471
		472	$self->{on_prepare}
		473	? $self->{on_prepare}->($self)
		474	: ()
		475	}
		476	);
		477	}
		478
		479	} else {
		480	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		481	}
		482
		483	$self
		484	}
		485
		486	sub _start {
		487	my ($self) = @_;
278		488
279	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	489	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
280		490
281	if ($self->{tls}) {	491	$self->{_activity} =
282	require Net::SSLeay;	492	$self->{_ractivity} =
283	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});
284	}
285
286	$self->{_activity} = AnyEvent->now;	493	$self->{_wactivity} = AE::now;
287	$self->_timeout;
288		494
289	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	495	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		496	$self->rtimeout (delete $self->{rtimeout}) if $self->{rtimeout};
		497	$self->wtimeout (delete $self->{wtimeout}) if $self->{wtimeout};
		498
290	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};	499	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
291		500
		501	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
		502	if $self->{tls};
		503
		504	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
		505
292	$self->start_read	506	$self->start_read
293	if $self->{on_read};	507	if $self->{on_read} || @{ $self->{_queue} };
294		508
295	$self	509	$self->_drain_wbuf;
296	}
297
298	sub _shutdown {
299	my ($self) = @_;
300
301	delete $self->{_tw};
302	delete $self->{_rw};
303	delete $self->{_ww};
304	delete $self->{fh};
305
306	$self->stoptls;
307
308	delete $self->{on_read};
309	delete $self->{_queue};
310	}	510	}
311		511
312	sub _error {	512	sub _error {
313	my ($self, $errno, $fatal) = @_;	513	my ($self, $errno, $fatal, $message) = @_;
314
315	$self->_shutdown
316	if $fatal;
317		514
318	$! = $errno;	515	$! = $errno;
		516	$message ||= "$!";
319		517
320	if ($self->{on_error}) {	518	if ($self->{on_error}) {
321	$self->{on_error}($self, $fatal);	519	$self->{on_error}($self, $fatal, $message);
322	} else {	520	$self->destroy if $fatal;
		521	} elsif ($self->{fh}) {
		522	$self->destroy;
323	Carp::croak "AnyEvent::Handle uncaught error: $!";	523	Carp::croak "AnyEvent::Handle uncaught error: $message";
324	}	524	}
325	}	525	}
326		526
327	=item $fh = $handle->fh	527	=item $fh = $handle->fh
328		528
329	This method returns the file handle of the L<AnyEvent::Handle> object.	529	This method returns the file handle used to create the L<AnyEvent::Handle> object.
330		530
331	=cut	531	=cut
332		532
333	sub fh { $_[0]{fh} }	533	sub fh { $_[0]{fh} }
334		534
…		…
352	$_[0]{on_eof} = $_[1];	552	$_[0]{on_eof} = $_[1];
353	}	553	}
354		554
355	=item $handle->on_timeout ($cb)	555	=item $handle->on_timeout ($cb)
356		556
357	Replace the current C<on_timeout> callback, or disables the callback	557	=item $handle->on_rtimeout ($cb)
358	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
359	argument.
360		558
361	=cut	559	=item $handle->on_wtimeout ($cb)
362		560
363	sub on_timeout {	561	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
364	$_[0]{on_timeout} = $_[1];	562	callback, or disables the callback (but not the timeout) if C<$cb> =
365	}	563	C<undef>. See the C<timeout> constructor argument and method.
		564
		565	=cut
		566
		567	# see below
366		568
367	=item $handle->autocork ($boolean)	569	=item $handle->autocork ($boolean)
368		570
369	Enables or disables the current autocork behaviour (see C<autocork>	571	Enables or disables the current autocork behaviour (see C<autocork>
370	constructor argument).	572	constructor argument). Changes will only take effect on the next write.
371		573
372	=cut	574	=cut
		575
		576	sub autocork {
		577	$_[0]{autocork} = $_[1];
		578	}
373		579
374	=item $handle->no_delay ($boolean)	580	=item $handle->no_delay ($boolean)
375		581
376	Enables or disables the C<no_delay> setting (see constructor argument of	582	Enables or disables the C<no_delay> setting (see constructor argument of
377	the same name for details).	583	the same name for details).
…		…
381	sub no_delay {	587	sub no_delay {
382	$_[0]{no_delay} = $_[1];	588	$_[0]{no_delay} = $_[1];
383		589
384	eval {	590	eval {
385	local $SIG{__DIE__};	591	local $SIG{__DIE__};
386	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	592	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1]
		593	if $_[0]{fh};
387	};	594	};
388	}	595	}
389		596
		597	=item $handle->on_starttls ($cb)
		598
		599	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		600
		601	=cut
		602
		603	sub on_starttls {
		604	$_[0]{on_starttls} = $_[1];
		605	}
		606
		607	=item $handle->on_stoptls ($cb)
		608
		609	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		610
		611	=cut
		612
		613	sub on_starttls {
		614	$_[0]{on_stoptls} = $_[1];
		615	}
		616
		617	=item $handle->rbuf_max ($max_octets)
		618
		619	Configures the C<rbuf_max> setting (C<undef> disables it).
		620
		621	=cut
		622
		623	sub rbuf_max {
		624	$_[0]{rbuf_max} = $_[1];
		625	}
		626
390	#############################################################################	627	#############################################################################
391		628
392	=item $handle->timeout ($seconds)	629	=item $handle->timeout ($seconds)
393		630
		631	=item $handle->rtimeout ($seconds)
		632
		633	=item $handle->wtimeout ($seconds)
		634
394	Configures (or disables) the inactivity timeout.	635	Configures (or disables) the inactivity timeout.
395		636
396	=cut	637	=item $handle->timeout_reset
397		638
398	sub timeout {	639	=item $handle->rtimeout_reset
		640
		641	=item $handle->wtimeout_reset
		642
		643	Reset the activity timeout, as if data was received or sent.
		644
		645	These methods are cheap to call.
		646
		647	=cut
		648
		649	for my $dir ("", "r", "w") {
		650	my $timeout = "${dir}timeout";
		651	my $tw = "_${dir}tw";
		652	my $on_timeout = "on_${dir}timeout";
		653	my $activity = "_${dir}activity";
		654	my $cb;
		655
		656	*$on_timeout = sub {
		657	$_[0]{$on_timeout} = $_[1];
		658	};
		659
		660	*$timeout = sub {
399	my ($self, $timeout) = @_;	661	my ($self, $new_value) = @_;
400		662
401	$self->{timeout} = $timeout;	663	$self->{$timeout} = $new_value;
402	$self->_timeout;	664	delete $self->{$tw}; &$cb;
403	}	665	};
404		666
		667	*{"${dir}timeout_reset"} = sub {
		668	$_[0]{$activity} = AE::now;
		669	};
		670
		671	# main workhorse:
405	# reset the timeout watcher, as neccessary	672	# reset the timeout watcher, as neccessary
406	# also check for time-outs	673	# also check for time-outs
407	sub _timeout {	674	$cb = sub {
408	my ($self) = @_;	675	my ($self) = @_;
409		676
410	if ($self->{timeout}) {	677	if ($self->{$timeout} && $self->{fh}) {
411	my $NOW = AnyEvent->now;	678	my $NOW = AE::now;
412		679
413	# when would the timeout trigger?	680	# when would the timeout trigger?
414	my $after = $self->{_activity} + $self->{timeout} - $NOW;	681	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
415		682
416	# now or in the past already?	683	# now or in the past already?
417	if ($after <= 0) {	684	if ($after <= 0) {
418	$self->{_activity} = $NOW;	685	$self->{$activity} = $NOW;
419		686
420	if ($self->{on_timeout}) {	687	if ($self->{$on_timeout}) {
421	$self->{on_timeout}($self);	688	$self->{$on_timeout}($self);
422	} else {	689	} else {
423	$self->_error (&Errno::ETIMEDOUT);	690	$self->_error (Errno::ETIMEDOUT);
		691	}
		692
		693	# callback could have changed timeout value, optimise
		694	return unless $self->{$timeout};
		695
		696	# calculate new after
		697	$after = $self->{$timeout};
424	}	698	}
425		699
426	# callback could have changed timeout value, optimise	700	Scalar::Util::weaken $self;
427	return unless $self->{timeout};	701	return unless $self; # ->error could have destroyed $self
428		702
429	# calculate new after	703	$self->{$tw} ||= AE::timer $after, 0, sub {
430	$after = $self->{timeout};	704	delete $self->{$tw};
		705	$cb->($self);
		706	};
		707	} else {
		708	delete $self->{$tw};
431	}	709	}
432
433	Scalar::Util::weaken $self;
434	return unless $self; # ->error could have destroyed $self
435
436	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
437	delete $self->{_tw};
438	$self->_timeout;
439	});
440	} else {
441	delete $self->{_tw};
442	}	710	}
443	}	711	}
444		712
445	#############################################################################	713	#############################################################################
446		714
…		…
470	my ($self, $cb) = @_;	738	my ($self, $cb) = @_;
471		739
472	$self->{on_drain} = $cb;	740	$self->{on_drain} = $cb;
473		741
474	$cb->($self)	742	$cb->($self)
475	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	743	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
476	}	744	}
477		745
478	=item $handle->push_write ($data)	746	=item $handle->push_write ($data)
479		747
480	Queues the given scalar to be written. You can push as much data as you	748	Queues the given scalar to be written. You can push as much data as you
…		…
491	Scalar::Util::weaken $self;	759	Scalar::Util::weaken $self;
492		760
493	my $cb = sub {	761	my $cb = sub {
494	my $len = syswrite $self->{fh}, $self->{wbuf};	762	my $len = syswrite $self->{fh}, $self->{wbuf};
495		763
496	if ($len >= 0) {	764	if (defined $len) {
497	substr $self->{wbuf}, 0, $len, "";	765	substr $self->{wbuf}, 0, $len, "";
498		766
499	$self->{_activity} = AnyEvent->now;	767	$self->{_activity} = $self->{_wactivity} = AE::now;
500		768
501	$self->{on_drain}($self)	769	$self->{on_drain}($self)
502	if $self->{low_water_mark} >= length $self->{wbuf}	770	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
503	&& $self->{on_drain};	771	&& $self->{on_drain};
504		772
505	delete $self->{_ww} unless length $self->{wbuf};	773	delete $self->{_ww} unless length $self->{wbuf};
506	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	774	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
507	$self->_error ($!, 1);	775	$self->_error ($!, 1);
…		…
510		778
511	# try to write data immediately	779	# try to write data immediately
512	$cb->() unless $self->{autocork};	780	$cb->() unless $self->{autocork};
513		781
514	# if still data left in wbuf, we need to poll	782	# if still data left in wbuf, we need to poll
515	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	783	$self->{_ww} = AE::io $self->{fh}, 1, $cb
516	if length $self->{wbuf};	784	if length $self->{wbuf};
517	};	785	};
518	}	786	}
519		787
520	our %WH;	788	our %WH;
…		…
531		799
532	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	800	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
533	->($self, @_);	801	->($self, @_);
534	}	802	}
535		803
536	if ($self->{filter_w}) {	804	if ($self->{tls}) {
537	$self->{filter_w}($self, \$_[0]);	805	$self->{_tls_wbuf} .= $_[0];
		806	&_dotls ($self) if $self->{fh};
538	} else {	807	} else {
539	$self->{wbuf} .= $_[0];	808	$self->{wbuf} .= $_[0];
540	$self->_drain_wbuf;	809	$self->_drain_wbuf if $self->{fh};
541	}	810	}
542	}	811	}
543		812
544	=item $handle->push_write (type => @args)	813	=item $handle->push_write (type => @args)
545		814
…		…
559	=cut	828	=cut
560		829
561	register_write_type netstring => sub {	830	register_write_type netstring => sub {
562	my ($self, $string) = @_;	831	my ($self, $string) = @_;
563		832
564	sprintf "%d:%s,", (length $string), $string	833	(length $string) . ":$string,"
565	};	834	};
566		835
567	=item packstring => $format, $data	836	=item packstring => $format, $data
568		837
569	An octet string prefixed with an encoded length. The encoding C<$format>	838	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
634		903
635	pack "w/a*", Storable::nfreeze ($ref)	904	pack "w/a*", Storable::nfreeze ($ref)
636	};	905	};
637		906
638	=back	907	=back
		908
		909	=item $handle->push_shutdown
		910
		911	Sometimes you know you want to close the socket after writing your data
		912	before it was actually written. One way to do that is to replace your
		913	C<on_drain> handler by a callback that shuts down the socket (and set
		914	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		915	replaces the C<on_drain> callback with:
		916
		917	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		918
		919	This simply shuts down the write side and signals an EOF condition to the
		920	the peer.
		921
		922	You can rely on the normal read queue and C<on_eof> handling
		923	afterwards. This is the cleanest way to close a connection.
		924
		925	=cut
		926
		927	sub push_shutdown {
		928	my ($self) = @_;
		929
		930	delete $self->{low_water_mark};
		931	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		932	}
639		933
640	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	934	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
641		935
642	This function (not method) lets you add your own types to C<push_write>.	936	This function (not method) lets you add your own types to C<push_write>.
643	Whenever the given C<type> is used, C<push_write> will invoke the code	937	Whenever the given C<type> is used, C<push_write> will invoke the code
…		…
737	=cut	1031	=cut
738		1032
739	sub _drain_rbuf {	1033	sub _drain_rbuf {
740	my ($self) = @_;	1034	my ($self) = @_;
741		1035
		1036	# avoid recursion
		1037	return if $self->{_skip_drain_rbuf};
742	local $self->{_in_drain} = 1;	1038	local $self->{_skip_drain_rbuf} = 1;
743
744	if (
745	defined $self->{rbuf_max}
746	&& $self->{rbuf_max} < length $self->{rbuf}
747	) {
748	$self->_error (&Errno::ENOSPC, 1), return;
749	}
750		1039
751	while () {	1040	while () {
		1041	# we need to use a separate tls read buffer, as we must not receive data while
		1042	# we are draining the buffer, and this can only happen with TLS.
		1043	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1044	if exists $self->{_tls_rbuf};
		1045
752	my $len = length $self->{rbuf};	1046	my $len = length $self->{rbuf};
753		1047
754	if (my $cb = shift @{ $self->{_queue} }) {	1048	if (my $cb = shift @{ $self->{_queue} }) {
755	unless ($cb->($self)) {	1049	unless ($cb->($self)) {
756	if ($self->{_eof}) {	1050	# no progress can be made
757	# no progress can be made (not enough data and no data forthcoming)	1051	# (not enough data and no data forthcoming)
758	$self->_error (&Errno::EPIPE, 1), return;	1052	$self->_error (Errno::EPIPE, 1), return
759	}	1053	if $self->{_eof};
760		1054
761	unshift @{ $self->{_queue} }, $cb;	1055	unshift @{ $self->{_queue} }, $cb;
762	last;	1056	last;
763	}	1057	}
764	} elsif ($self->{on_read}) {	1058	} elsif ($self->{on_read}) {
…		…
771	&& !@{ $self->{_queue} } # and the queue is still empty	1065	&& !@{ $self->{_queue} } # and the queue is still empty
772	&& $self->{on_read} # but we still have on_read	1066	&& $self->{on_read} # but we still have on_read
773	) {	1067	) {
774	# no further data will arrive	1068	# no further data will arrive
775	# so no progress can be made	1069	# so no progress can be made
776	$self->_error (&Errno::EPIPE, 1), return	1070	$self->_error (Errno::EPIPE, 1), return
777	if $self->{_eof};	1071	if $self->{_eof};
778		1072
779	last; # more data might arrive	1073	last; # more data might arrive
780	}	1074	}
781	} else {	1075	} else {
782	# read side becomes idle	1076	# read side becomes idle
783	delete $self->{_rw};	1077	delete $self->{_rw} unless $self->{tls};
784	last;	1078	last;
785	}	1079	}
786	}	1080	}
787		1081
788	if ($self->{_eof}) {	1082	if ($self->{_eof}) {
789	if ($self->{on_eof}) {	1083	$self->{on_eof}
790	$self->{on_eof}($self)	1084	? $self->{on_eof}($self)
791	} else {	1085	: $self->_error (0, 1, "Unexpected end-of-file");
792	$self->_error (0, 1);	1086
793	}	1087	return;
		1088	}
		1089
		1090	if (
		1091	defined $self->{rbuf_max}
		1092	&& $self->{rbuf_max} < length $self->{rbuf}
		1093	) {
		1094	$self->_error (Errno::ENOSPC, 1), return;
794	}	1095	}
795		1096
796	# may need to restart read watcher	1097	# may need to restart read watcher
797	unless ($self->{_rw}) {	1098	unless ($self->{_rw}) {
798	$self->start_read	1099	$self->start_read
…		…
810		1111
811	sub on_read {	1112	sub on_read {
812	my ($self, $cb) = @_;	1113	my ($self, $cb) = @_;
813		1114
814	$self->{on_read} = $cb;	1115	$self->{on_read} = $cb;
815	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1116	$self->_drain_rbuf if $cb;
816	}	1117	}
817		1118
818	=item $handle->rbuf	1119	=item $handle->rbuf
819		1120
820	Returns the read buffer (as a modifiable lvalue).	1121	Returns the read buffer (as a modifiable lvalue).
821		1122
822	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1123	You can access the read buffer directly as the C<< ->{rbuf} >>
823	you want.	1124	member, if you want. However, the only operation allowed on the
		1125	read buffer (apart from looking at it) is removing data from its
		1126	beginning. Otherwise modifying or appending to it is not allowed and will
		1127	lead to hard-to-track-down bugs.
824		1128
825	NOTE: The read buffer should only be used or modified if the C<on_read>,	1129	NOTE: The read buffer should only be used or modified if the C<on_read>,
826	C<push_read> or C<unshift_read> methods are used. The other read methods	1130	C<push_read> or C<unshift_read> methods are used. The other read methods
827	automatically manage the read buffer.	1131	automatically manage the read buffer.
828		1132
…		…
869	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1173	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
870	->($self, $cb, @_);	1174	->($self, $cb, @_);
871	}	1175	}
872		1176
873	push @{ $self->{_queue} }, $cb;	1177	push @{ $self->{_queue} }, $cb;
874	$self->_drain_rbuf unless $self->{_in_drain};	1178	$self->_drain_rbuf;
875	}	1179	}
876		1180
877	sub unshift_read {	1181	sub unshift_read {
878	my $self = shift;	1182	my $self = shift;
879	my $cb = pop;	1183	my $cb = pop;
…		…
885	->($self, $cb, @_);	1189	->($self, $cb, @_);
886	}	1190	}
887		1191
888		1192
889	unshift @{ $self->{_queue} }, $cb;	1193	unshift @{ $self->{_queue} }, $cb;
890	$self->_drain_rbuf unless $self->{_in_drain};	1194	$self->_drain_rbuf;
891	}	1195	}
892		1196
893	=item $handle->push_read (type => @args, $cb)	1197	=item $handle->push_read (type => @args, $cb)
894		1198
895	=item $handle->unshift_read (type => @args, $cb)	1199	=item $handle->unshift_read (type => @args, $cb)
…		…
1028	return 1;	1332	return 1;
1029	}	1333	}
1030		1334
1031	# reject	1335	# reject
1032	if ($reject && $$rbuf =~ $reject) {	1336	if ($reject && $$rbuf =~ $reject) {
1033	$self->_error (&Errno::EBADMSG);	1337	$self->_error (Errno::EBADMSG);
1034	}	1338	}
1035		1339
1036	# skip	1340	# skip
1037	if ($skip && $$rbuf =~ $skip) {	1341	if ($skip && $$rbuf =~ $skip) {
1038	$data .= substr $$rbuf, 0, $+[0], "";	1342	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1054	my ($self, $cb) = @_;	1358	my ($self, $cb) = @_;
1055		1359
1056	sub {	1360	sub {
1057	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1361	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1058	if ($_[0]{rbuf} =~ /[^0-9]/) {	1362	if ($_[0]{rbuf} =~ /[^0-9]/) {
1059	$self->_error (&Errno::EBADMSG);	1363	$self->_error (Errno::EBADMSG);
1060	}	1364	}
1061	return;	1365	return;
1062	}	1366	}
1063		1367
1064	my $len = $1;	1368	my $len = $1;
…		…
1067	my $string = $_[1];	1371	my $string = $_[1];
1068	$_[0]->unshift_read (chunk => 1, sub {	1372	$_[0]->unshift_read (chunk => 1, sub {
1069	if ($_[1] eq ",") {	1373	if ($_[1] eq ",") {
1070	$cb->($_[0], $string);	1374	$cb->($_[0], $string);
1071	} else {	1375	} else {
1072	$self->_error (&Errno::EBADMSG);	1376	$self->_error (Errno::EBADMSG);
1073	}	1377	}
1074	});	1378	});
1075	});	1379	});
1076		1380
1077	1	1381	1
…		…
1083	An octet string prefixed with an encoded length. The encoding C<$format>	1387	An octet string prefixed with an encoded length. The encoding C<$format>
1084	uses the same format as a Perl C<pack> format, but must specify a single	1388	uses the same format as a Perl C<pack> format, but must specify a single
1085	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1389	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1086	optional C<!>, C<< < >> or C<< > >> modifier).	1390	optional C<!>, C<< < >> or C<< > >> modifier).
1087		1391
1088	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1392	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1393	EPP uses a prefix of C<N> (4 octtes).
1089		1394
1090	Example: read a block of data prefixed by its length in BER-encoded	1395	Example: read a block of data prefixed by its length in BER-encoded
1091	format (very efficient).	1396	format (very efficient).
1092		1397
1093	$handle->push_read (packstring => "w", sub {	1398	$handle->push_read (packstring => "w", sub {
…		…
1123	}	1428	}
1124	};	1429	};
1125		1430
1126	=item json => $cb->($handle, $hash_or_arrayref)	1431	=item json => $cb->($handle, $hash_or_arrayref)
1127		1432
1128	Reads a JSON object or array, decodes it and passes it to the callback.	1433	Reads a JSON object or array, decodes it and passes it to the
		1434	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1129		1435
1130	If a C<json> object was passed to the constructor, then that will be used	1436	If a C<json> object was passed to the constructor, then that will be used
1131	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1437	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1132		1438
1133	This read type uses the incremental parser available with JSON version	1439	This read type uses the incremental parser available with JSON version
…		…
1142	=cut	1448	=cut
1143		1449
1144	register_read_type json => sub {	1450	register_read_type json => sub {
1145	my ($self, $cb) = @_;	1451	my ($self, $cb) = @_;
1146		1452
1147	require JSON;	1453	my $json = $self->{json} ||=
		1454	eval { require JSON::XS; JSON::XS->new->utf8 }
		1455	|| do { require JSON; JSON->new->utf8 };
1148		1456
1149	my $data;	1457	my $data;
1150	my $rbuf = \$self->{rbuf};	1458	my $rbuf = \$self->{rbuf};
1151		1459
1152	my $json = $self->{json} ||= JSON->new->utf8;
1153
1154	sub {	1460	sub {
1155	my $ref = $json->incr_parse ($self->{rbuf});	1461	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1156		1462
1157	if ($ref) {	1463	if ($ref) {
1158	$self->{rbuf} = $json->incr_text;	1464	$self->{rbuf} = $json->incr_text;
1159	$json->incr_text = "";	1465	$json->incr_text = "";
1160	$cb->($self, $ref);	1466	$cb->($self, $ref);
1161		1467
1162	1	1468	1
		1469	} elsif ($@) {
		1470	# error case
		1471	$json->incr_skip;
		1472
		1473	$self->{rbuf} = $json->incr_text;
		1474	$json->incr_text = "";
		1475
		1476	$self->_error (Errno::EBADMSG);
		1477
		1478	()
1163	} else {	1479	} else {
1164	$self->{rbuf} = "";	1480	$self->{rbuf} = "";
		1481
1165	()	1482	()
1166	}	1483	}
1167	}	1484	}
1168	};	1485	};
1169		1486
…		…
1201	# read remaining chunk	1518	# read remaining chunk
1202	$_[0]->unshift_read (chunk => $len, sub {	1519	$_[0]->unshift_read (chunk => $len, sub {
1203	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1520	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1204	$cb->($_[0], $ref);	1521	$cb->($_[0], $ref);
1205	} else {	1522	} else {
1206	$self->_error (&Errno::EBADMSG);	1523	$self->_error (Errno::EBADMSG);
1207	}	1524	}
1208	});	1525	});
1209	}	1526	}
1210		1527
1211	1	1528	1
…		…
1246	Note that AnyEvent::Handle will automatically C<start_read> for you when	1563	Note that AnyEvent::Handle will automatically C<start_read> for you when
1247	you change the C<on_read> callback or push/unshift a read callback, and it	1564	you change the C<on_read> callback or push/unshift a read callback, and it
1248	will automatically C<stop_read> for you when neither C<on_read> is set nor	1565	will automatically C<stop_read> for you when neither C<on_read> is set nor
1249	there are any read requests in the queue.	1566	there are any read requests in the queue.
1250		1567
		1568	These methods will have no effect when in TLS mode (as TLS doesn't support
		1569	half-duplex connections).
		1570
1251	=cut	1571	=cut
1252		1572
1253	sub stop_read {	1573	sub stop_read {
1254	my ($self) = @_;	1574	my ($self) = @_;
1255		1575
1256	delete $self->{_rw};	1576	delete $self->{_rw} unless $self->{tls};
1257	}	1577	}
1258		1578
1259	sub start_read {	1579	sub start_read {
1260	my ($self) = @_;	1580	my ($self) = @_;
1261		1581
1262	unless ($self->{_rw} || $self->{_eof}) {	1582	unless ($self->{_rw} || $self->{_eof}) {
1263	Scalar::Util::weaken $self;	1583	Scalar::Util::weaken $self;
1264		1584
1265	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1585	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1266	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1586	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1267	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1587	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1268		1588
1269	if ($len > 0) {	1589	if ($len > 0) {
1270	$self->{_activity} = AnyEvent->now;	1590	$self->{_activity} = $self->{_ractivity} = AE::now;
1271		1591
1272	$self->{filter_r}	1592	if ($self->{tls}) {
1273	? $self->{filter_r}($self, $rbuf)	1593	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1274	: $self->{_in_drain} || $self->_drain_rbuf;	1594
		1595	&_dotls ($self);
		1596	} else {
		1597	$self->_drain_rbuf;
		1598	}
1275		1599
1276	} elsif (defined $len) {	1600	} elsif (defined $len) {
1277	delete $self->{_rw};	1601	delete $self->{_rw};
1278	$self->{_eof} = 1;	1602	$self->{_eof} = 1;
1279	$self->_drain_rbuf unless $self->{_in_drain};	1603	$self->_drain_rbuf;
1280		1604
1281	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1605	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1282	return $self->_error ($!, 1);	1606	return $self->_error ($!, 1);
1283	}	1607	}
1284	});	1608	};
1285	}	1609	}
1286	}	1610	}
1287		1611
		1612	our $ERROR_SYSCALL;
		1613	our $ERROR_WANT_READ;
		1614
		1615	sub _tls_error {
		1616	my ($self, $err) = @_;
		1617
		1618	return $self->_error ($!, 1)
		1619	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1620
		1621	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1622
		1623	# reduce error string to look less scary
		1624	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1625
		1626	if ($self->{_on_starttls}) {
		1627	(delete $self->{_on_starttls})->($self, undef, $err);
		1628	&_freetls;
		1629	} else {
		1630	&_freetls;
		1631	$self->_error (Errno::EPROTO, 1, $err);
		1632	}
		1633	}
		1634
		1635	# poll the write BIO and send the data if applicable
		1636	# also decode read data if possible
		1637	# this is basiclaly our TLS state machine
		1638	# more efficient implementations are possible with openssl,
		1639	# but not with the buggy and incomplete Net::SSLeay.
1288	sub _dotls {	1640	sub _dotls {
1289	my ($self) = @_;	1641	my ($self) = @_;
1290		1642
1291	my $buf;	1643	my $tmp;
1292		1644
1293	if (length $self->{_tls_wbuf}) {	1645	if (length $self->{_tls_wbuf}) {
1294	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1646	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1295	substr $self->{_tls_wbuf}, 0, $len, "";	1647	substr $self->{_tls_wbuf}, 0, $tmp, "";
1296	}	1648	}
1297	}
1298		1649
		1650	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1651	return $self->_tls_error ($tmp)
		1652	if $tmp != $ERROR_WANT_READ
		1653	&& ($tmp != $ERROR_SYSCALL || $!);
		1654	}
		1655
		1656	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1657	unless (length $tmp) {
		1658	$self->{_on_starttls}
		1659	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1660	&_freetls;
		1661
		1662	if ($self->{on_stoptls}) {
		1663	$self->{on_stoptls}($self);
		1664	return;
		1665	} else {
		1666	# let's treat SSL-eof as we treat normal EOF
		1667	delete $self->{_rw};
		1668	$self->{_eof} = 1;
		1669	}
		1670	}
		1671
		1672	$self->{_tls_rbuf} .= $tmp;
		1673	$self->_drain_rbuf;
		1674	$self->{tls} or return; # tls session might have gone away in callback
		1675	}
		1676
		1677	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1678	return $self->_tls_error ($tmp)
		1679	if $tmp != $ERROR_WANT_READ
		1680	&& ($tmp != $ERROR_SYSCALL || $!);
		1681
1299	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1682	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1300	$self->{wbuf} .= $buf;	1683	$self->{wbuf} .= $tmp;
1301	$self->_drain_wbuf;	1684	$self->_drain_wbuf;
1302	}	1685	}
1303		1686
1304	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1687	$self->{_on_starttls}
1305	if (length $buf) {	1688	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1306	$self->{rbuf} .= $buf;	1689	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1307	$self->_drain_rbuf unless $self->{_in_drain};
1308	} else {
1309	# let's treat SSL-eof as we treat normal EOF
1310	$self->{_eof} = 1;
1311	$self->_shutdown;
1312	return;
1313	}
1314	}
1315
1316	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1317
1318	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1319	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1320	return $self->_error ($!, 1);
1321	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1322	return $self->_error (&Errno::EIO, 1);
1323	}
1324
1325	# all others are fine for our purposes
1326	}
1327	}	1690	}
1328		1691
1329	=item $handle->starttls ($tls[, $tls_ctx])	1692	=item $handle->starttls ($tls[, $tls_ctx])
1330		1693
1331	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1694	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1332	object is created, you can also do that at a later time by calling	1695	object is created, you can also do that at a later time by calling
1333	C<starttls>.	1696	C<starttls>.
1334		1697
		1698	Starting TLS is currently an asynchronous operation - when you push some
		1699	write data and then call C<< ->starttls >> then TLS negotiation will start
		1700	immediately, after which the queued write data is then sent.
		1701
1335	The first argument is the same as the C<tls> constructor argument (either	1702	The first argument is the same as the C<tls> constructor argument (either
1336	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1703	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1337		1704
1338	The second argument is the optional C<Net::SSLeay::CTX> object that is	1705	The second argument is the optional C<AnyEvent::TLS> object that is used
1339	used when AnyEvent::Handle has to create its own TLS connection object.	1706	when AnyEvent::Handle has to create its own TLS connection object, or
		1707	a hash reference with C<< key => value >> pairs that will be used to
		1708	construct a new context.
1340		1709
1341	The TLS connection object will end up in C<< $handle->{tls} >> after this	1710	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1342	call and can be used or changed to your liking. Note that the handshake	1711	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1343	might have already started when this function returns.	1712	changed to your liking. Note that the handshake might have already started
		1713	when this function returns.
1344		1714
		1715	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1716	handshakes on the same stream. Best do not attempt to use the stream after
		1717	stopping TLS.
		1718
1345	=cut	1719	=cut
		1720
		1721	our %TLS_CACHE; #TODO not yet documented, should we?
1346		1722
1347	sub starttls {	1723	sub starttls {
1348	my ($self, $ssl, $ctx) = @_;	1724	my ($self, $tls, $ctx) = @_;
1349		1725
1350	$self->stoptls;	1726	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1727	if $self->{tls};
1351		1728
1352	if ($ssl eq "accept") {	1729	$self->{tls} = $tls;
1353	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1730	$self->{tls_ctx} = $ctx if @_ > 2;
1354	Net::SSLeay::set_accept_state ($ssl);	1731
1355	} elsif ($ssl eq "connect") {	1732	return unless $self->{fh};
1356	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1733
1357	Net::SSLeay::set_connect_state ($ssl);	1734	require Net::SSLeay;
		1735
		1736	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1737	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1738
		1739	$tls = $self->{tls};
		1740	$ctx = $self->{tls_ctx};
		1741
		1742	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1743
		1744	if ("HASH" eq ref $ctx) {
		1745	require AnyEvent::TLS;
		1746
		1747	if ($ctx->{cache}) {
		1748	my $key = $ctx+0;
		1749	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1750	} else {
		1751	$ctx = new AnyEvent::TLS %$ctx;
		1752	}
		1753	}
1358	}	1754
1359		1755	$self->{tls_ctx} = $ctx || TLS_CTX ();
1360	$self->{tls} = $ssl;	1756	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1361		1757
1362	# basically, this is deep magic (because SSL_read should have the same issues)	1758	# basically, this is deep magic (because SSL_read should have the same issues)
1363	# but the openssl maintainers basically said: "trust us, it just works".	1759	# but the openssl maintainers basically said: "trust us, it just works".
1364	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1760	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1365	# and mismaintained ssleay-module doesn't even offer them).	1761	# and mismaintained ssleay-module doesn't even offer them).
1366	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1762	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1763	#
		1764	# in short: this is a mess.
		1765	#
		1766	# note that we do not try to keep the length constant between writes as we are required to do.
		1767	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1768	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1769	# have identity issues in that area.
1367	Net::SSLeay::CTX_set_mode ($self->{tls},	1770	# Net::SSLeay::CTX_set_mode ($ssl,
1368	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1771	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1369	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1772	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1773	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1370		1774
1371	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1775	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1372	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1776	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1373		1777
		1778	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1779
1374	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1780	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1375		1781
1376	$self->{filter_w} = sub {	1782	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1377	$_[0]{_tls_wbuf} .= ${$_[1]};	1783	if $self->{on_starttls};
1378	&_dotls;	1784
1379	};	1785	&_dotls; # need to trigger the initial handshake
1380	$self->{filter_r} = sub {	1786	$self->start_read; # make sure we actually do read
1381	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1382	&_dotls;
1383	};
1384	}	1787	}
1385		1788
1386	=item $handle->stoptls	1789	=item $handle->stoptls
1387		1790
1388	Destroys the SSL connection, if any. Partial read or write data will be	1791	Shuts down the SSL connection - this makes a proper EOF handshake by
1389	lost.	1792	sending a close notify to the other side, but since OpenSSL doesn't
		1793	support non-blocking shut downs, it is not guarenteed that you can re-use
		1794	the stream afterwards.
1390		1795
1391	=cut	1796	=cut
1392		1797
1393	sub stoptls {	1798	sub stoptls {
1394	my ($self) = @_;	1799	my ($self) = @_;
1395		1800
1396	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1801	if ($self->{tls}) {
		1802	Net::SSLeay::shutdown ($self->{tls});
1397		1803
1398	delete $self->{_rbio};	1804	&_dotls;
1399	delete $self->{_wbio};	1805
1400	delete $self->{_tls_wbuf};	1806	# # we don't give a shit. no, we do, but we can't. no...#d#
1401	delete $self->{filter_r};	1807	# # we, we... have to use openssl :/#d#
1402	delete $self->{filter_w};	1808	# &_freetls;#d#
		1809	}
		1810	}
		1811
		1812	sub _freetls {
		1813	my ($self) = @_;
		1814
		1815	return unless $self->{tls};
		1816
		1817	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1818	if $self->{tls} > 0;
		1819
		1820	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1403	}	1821	}
1404		1822
1405	sub DESTROY {	1823	sub DESTROY {
1406	my $self = shift;	1824	my ($self) = @_;
1407		1825
1408	$self->stoptls;	1826	&_freetls;
1409		1827
1410	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1828	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1411		1829
1412	if ($linger && length $self->{wbuf}) {	1830	if ($linger && length $self->{wbuf} && $self->{fh}) {
1413	my $fh = delete $self->{fh};	1831	my $fh = delete $self->{fh};
1414	my $wbuf = delete $self->{wbuf};	1832	my $wbuf = delete $self->{wbuf};
1415		1833
1416	my @linger;	1834	my @linger;
1417		1835
1418	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	1836	push @linger, AE::io $fh, 1, sub {
1419	my $len = syswrite $fh, $wbuf, length $wbuf;	1837	my $len = syswrite $fh, $wbuf, length $wbuf;
1420		1838
1421	if ($len > 0) {	1839	if ($len > 0) {
1422	substr $wbuf, 0, $len, "";	1840	substr $wbuf, 0, $len, "";
1423	} else {	1841	} else {
1424	@linger = (); # end	1842	@linger = (); # end
1425	}	1843	}
1426	});	1844	};
1427	push @linger, AnyEvent->timer (after => $linger, cb => sub {	1845	push @linger, AE::timer $linger, 0, sub {
1428	@linger = ();	1846	@linger = ();
1429	});	1847	};
1430	}	1848	}
		1849	}
		1850
		1851	=item $handle->destroy
		1852
		1853	Shuts down the handle object as much as possible - this call ensures that
		1854	no further callbacks will be invoked and as many resources as possible
		1855	will be freed. Any method you will call on the handle object after
		1856	destroying it in this way will be silently ignored (and it will return the
		1857	empty list).
		1858
		1859	Normally, you can just "forget" any references to an AnyEvent::Handle
		1860	object and it will simply shut down. This works in fatal error and EOF
		1861	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1862	callback, so when you want to destroy the AnyEvent::Handle object from
		1863	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1864	that case.
		1865
		1866	Destroying the handle object in this way has the advantage that callbacks
		1867	will be removed as well, so if those are the only reference holders (as
		1868	is common), then one doesn't need to do anything special to break any
		1869	reference cycles.
		1870
		1871	The handle might still linger in the background and write out remaining
		1872	data, as specified by the C<linger> option, however.
		1873
		1874	=cut
		1875
		1876	sub destroy {
		1877	my ($self) = @_;
		1878
		1879	$self->DESTROY;
		1880	%$self = ();
		1881	bless $self, "AnyEvent::Handle::destroyed";
		1882	}
		1883
		1884	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		1885	#nop
1431	}	1886	}
1432		1887
1433	=item AnyEvent::Handle::TLS_CTX	1888	=item AnyEvent::Handle::TLS_CTX
1434		1889
1435	This function creates and returns the Net::SSLeay::CTX object used by	1890	This function creates and returns the AnyEvent::TLS object used by default
1436	default for TLS mode.	1891	for TLS mode.
1437		1892
1438	The context is created like this:	1893	The context is created by calling L<AnyEvent::TLS> without any arguments.
1439
1440	Net::SSLeay::load_error_strings;
1441	Net::SSLeay::SSLeay_add_ssl_algorithms;
1442	Net::SSLeay::randomize;
1443
1444	my $CTX = Net::SSLeay::CTX_new;
1445
1446	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1447		1894
1448	=cut	1895	=cut
1449		1896
1450	our $TLS_CTX;	1897	our $TLS_CTX;
1451		1898
1452	sub TLS_CTX() {	1899	sub TLS_CTX() {
1453	$TLS_CTX || do {	1900	$TLS_CTX ||= do {
1454	require Net::SSLeay;	1901	require AnyEvent::TLS;
1455		1902
1456	Net::SSLeay::load_error_strings ();	1903	new AnyEvent::TLS
1457	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1458	Net::SSLeay::randomize ();
1459
1460	$TLS_CTX = Net::SSLeay::CTX_new ();
1461
1462	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1463
1464	$TLS_CTX
1465	}	1904	}
1466	}	1905	}
1467		1906
1468	=back	1907	=back
		1908
		1909
		1910	=head1 NONFREQUENTLY ASKED QUESTIONS
		1911
		1912	=over 4
		1913
		1914	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1915	still get further invocations!
		1916
		1917	That's because AnyEvent::Handle keeps a reference to itself when handling
		1918	read or write callbacks.
		1919
		1920	It is only safe to "forget" the reference inside EOF or error callbacks,
		1921	from within all other callbacks, you need to explicitly call the C<<
		1922	->destroy >> method.
		1923
		1924	=item I get different callback invocations in TLS mode/Why can't I pause
		1925	reading?
		1926
		1927	Unlike, say, TCP, TLS connections do not consist of two independent
		1928	communication channels, one for each direction. Or put differently. The
		1929	read and write directions are not independent of each other: you cannot
		1930	write data unless you are also prepared to read, and vice versa.
		1931
		1932	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		1933	callback invocations when you are not expecting any read data - the reason
		1934	is that AnyEvent::Handle always reads in TLS mode.
		1935
		1936	During the connection, you have to make sure that you always have a
		1937	non-empty read-queue, or an C<on_read> watcher. At the end of the
		1938	connection (or when you no longer want to use it) you can call the
		1939	C<destroy> method.
		1940
		1941	=item How do I read data until the other side closes the connection?
		1942
		1943	If you just want to read your data into a perl scalar, the easiest way
		1944	to achieve this is by setting an C<on_read> callback that does nothing,
		1945	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		1946	will be in C<$_[0]{rbuf}>:
		1947
		1948	$handle->on_read (sub { });
		1949	$handle->on_eof (undef);
		1950	$handle->on_error (sub {
		1951	my $data = delete $_[0]{rbuf};
		1952	});
		1953
		1954	The reason to use C<on_error> is that TCP connections, due to latencies
		1955	and packets loss, might get closed quite violently with an error, when in
		1956	fact, all data has been received.
		1957
		1958	It is usually better to use acknowledgements when transferring data,
		1959	to make sure the other side hasn't just died and you got the data
		1960	intact. This is also one reason why so many internet protocols have an
		1961	explicit QUIT command.
		1962
		1963	=item I don't want to destroy the handle too early - how do I wait until
		1964	all data has been written?
		1965
		1966	After writing your last bits of data, set the C<on_drain> callback
		1967	and destroy the handle in there - with the default setting of
		1968	C<low_water_mark> this will be called precisely when all data has been
		1969	written to the socket:
		1970
		1971	$handle->push_write (...);
		1972	$handle->on_drain (sub {
		1973	warn "all data submitted to the kernel\n";
		1974	undef $handle;
		1975	});
		1976
		1977	If you just want to queue some data and then signal EOF to the other side,
		1978	consider using C<< ->push_shutdown >> instead.
		1979
		1980	=item I want to contact a TLS/SSL server, I don't care about security.
		1981
		1982	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		1983	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		1984	parameter:
		1985
		1986	tcp_connect $host, $port, sub {
		1987	my ($fh) = @_;
		1988
		1989	my $handle = new AnyEvent::Handle
		1990	fh => $fh,
		1991	tls => "connect",
		1992	on_error => sub { ... };
		1993
		1994	$handle->push_write (...);
		1995	};
		1996
		1997	=item I want to contact a TLS/SSL server, I do care about security.
		1998
		1999	Then you should additionally enable certificate verification, including
		2000	peername verification, if the protocol you use supports it (see
		2001	L<AnyEvent::TLS>, C<verify_peername>).
		2002
		2003	E.g. for HTTPS:
		2004
		2005	tcp_connect $host, $port, sub {
		2006	my ($fh) = @_;
		2007
		2008	my $handle = new AnyEvent::Handle
		2009	fh => $fh,
		2010	peername => $host,
		2011	tls => "connect",
		2012	tls_ctx => { verify => 1, verify_peername => "https" },
		2013	...
		2014
		2015	Note that you must specify the hostname you connected to (or whatever
		2016	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2017	peername verification will be done.
		2018
		2019	The above will use the system-dependent default set of trusted CA
		2020	certificates. If you want to check against a specific CA, add the
		2021	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2022
		2023	tls_ctx => {
		2024	verify => 1,
		2025	verify_peername => "https",
		2026	ca_file => "my-ca-cert.pem",
		2027	},
		2028
		2029	=item I want to create a TLS/SSL server, how do I do that?
		2030
		2031	Well, you first need to get a server certificate and key. You have
		2032	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2033	self-signed certificate (cheap. check the search engine of your choice,
		2034	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2035	nice program for that purpose).
		2036
		2037	Then create a file with your private key (in PEM format, see
		2038	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2039	file should then look like this:
		2040
		2041	-----BEGIN RSA PRIVATE KEY-----
		2042	...header data
		2043	... lots of base64'y-stuff
		2044	-----END RSA PRIVATE KEY-----
		2045
		2046	-----BEGIN CERTIFICATE-----
		2047	... lots of base64'y-stuff
		2048	-----END CERTIFICATE-----
		2049
		2050	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2051	specify this file as C<cert_file>:
		2052
		2053	tcp_server undef, $port, sub {
		2054	my ($fh) = @_;
		2055
		2056	my $handle = new AnyEvent::Handle
		2057	fh => $fh,
		2058	tls => "accept",
		2059	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2060	...
		2061
		2062	When you have intermediate CA certificates that your clients might not
		2063	know about, just append them to the C<cert_file>.
		2064
		2065	=back
		2066
1469		2067
1470	=head1 SUBCLASSING AnyEvent::Handle	2068	=head1 SUBCLASSING AnyEvent::Handle
1471		2069
1472	In many cases, you might want to subclass AnyEvent::Handle.	2070	In many cases, you might want to subclass AnyEvent::Handle.
1473		2071

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines