ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.40 by root, Tue May 27 05:36:27 2008 UTC vs.
Revision 1.183 by root, Thu Sep 3 12:45:35 2009 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw/EAGAIN EINTR/;
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16
17	=cut
18
19	our $VERSION = '0.04';
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	);
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	filehandles.
52	on sockets see L<AnyEvent::Util>.	37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
53		40
54	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
57		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
58	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
59	argument.	49	argument.
60		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
61	=head1 METHODS	65	=head1 METHODS
62		66
63	=over 4	67	=over 4
64		68
65	=item B<new (%args)>	69	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
66		70
67	The constructor supports these arguments (all as key => value pairs).	71	The constructor supports these arguments (all as C<< key => value >> pairs).
68		72
69	=over 4	73	=over 4
70		74
71	=item fh => $filehandle [MANDATORY]	75	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		76
73	The filehandle this L<AnyEvent::Handle> object will operate on.	77	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	78	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		80	that mode.
77		81
78	=item on_eof => $cb->($handle)	82	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
79		83
80	Set the callback to be called on EOF.	84	Try to connect to the specified host and service (port), using
		85	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		86	default C<peername>.
81		87
82	While not mandatory, it is highly recommended to set an eof callback,	88	You have to specify either this parameter, or C<fh>, above.
83	otherwise you might end up with a closed socket while you are still
84	waiting for data.
85		89
		90	It is possible to push requests on the read and write queues, and modify
		91	properties of the stream, even while AnyEvent::Handle is connecting.
		92
		93	When this parameter is specified, then the C<on_prepare>,
		94	C<on_connect_error> and C<on_connect> callbacks will be called under the
		95	appropriate circumstances:
		96
		97	=over 4
		98
86	=item on_error => $cb->($handle)	99	=item on_prepare => $cb->($handle)
87		100
		101	This (rarely used) callback is called before a new connection is
		102	attempted, but after the file handle has been created. It could be used to
		103	prepare the file handle with parameters required for the actual connect
		104	(as opposed to settings that can be changed when the connection is already
		105	established).
		106
		107	The return value of this callback should be the connect timeout value in
		108	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
		109	timeout is to be used).
		110
		111	=item on_connect => $cb->($handle, $host, $port, $retry->())
		112
		113	This callback is called when a connection has been successfully established.
		114
		115	The actual numeric host and port (the socket peername) are passed as
		116	parameters, together with a retry callback.
		117
		118	When, for some reason, the handle is not acceptable, then calling
		119	C<$retry> will continue with the next conenction target (in case of
		120	multi-homed hosts or SRV records there can be multiple connection
		121	endpoints). When it is called then the read and write queues, eof status,
		122	tls status and similar properties of the handle are being reset.
		123
		124	In most cases, ignoring the C<$retry> parameter is the way to go.
		125
		126	=item on_connect_error => $cb->($handle, $message)
		127
		128	This callback is called when the conenction could not be
		129	established. C<$!> will contain the relevant error code, and C<$message> a
		130	message describing it (usually the same as C<"$!">).
		131
		132	If this callback isn't specified, then C<on_error> will be called with a
		133	fatal error instead.
		134
		135	=back
		136
		137	=item on_error => $cb->($handle, $fatal, $message)
		138
88	This is the fatal error callback, that is called when, well, a fatal error	139	This is the error callback, which is called when, well, some error
89	occurs, such as not being able to resolve the hostname, failure to connect	140	occured, such as not being able to resolve the hostname, failure to
90	or a read error.	141	connect or a read error.
91		142
92	The object will not be in a usable state when this callback has been	143	Some errors are fatal (which is indicated by C<$fatal> being true). On
93	called.	144	fatal errors the handle object will be destroyed (by a call to C<< ->
		145	destroy >>) after invoking the error callback (which means you are free to
		146	examine the handle object). Examples of fatal errors are an EOF condition
		147	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		148	cases where the other side can close the connection at their will it is
		149	often easiest to not report C<EPIPE> errors in this callback.
		150
		151	AnyEvent::Handle tries to find an appropriate error code for you to check
		152	against, but in some cases (TLS errors), this does not work well. It is
		153	recommended to always output the C<$message> argument in human-readable
		154	error messages (it's usually the same as C<"$!">).
		155
		156	Non-fatal errors can be retried by simply returning, but it is recommended
		157	to simply ignore this parameter and instead abondon the handle object
		158	when this callback is invoked. Examples of non-fatal errors are timeouts
		159	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
94		160
95	On callback entrance, the value of C<$!> contains the operating system	161	On callback entrance, the value of C<$!> contains the operating system
96	error (or C<ENOSPC>, C<EPIPE> or C<EBADMSG>).	162	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
97		163	C<EPROTO>).
98	The callback should throw an exception. If it returns, then
99	AnyEvent::Handle will C<croak> for you.
100		164
101	While not mandatory, it is I<highly> recommended to set this callback, as	165	While not mandatory, it is I<highly> recommended to set this callback, as
102	you will not be notified of errors otherwise. The default simply calls	166	you will not be notified of errors otherwise. The default simply calls
103	die.	167	C<croak>.
104		168
105	=item on_read => $cb->($handle)	169	=item on_read => $cb->($handle)
106		170
107	This sets the default read callback, which is called when data arrives	171	This sets the default read callback, which is called when data arrives
108	and no read request is in the queue.	172	and no read request is in the queue (unlike read queue callbacks, this
		173	callback will only be called when at least one octet of data is in the
		174	read buffer).
109		175
110	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	176	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
111	method or access the C<$handle->{rbuf}> member directly.	177	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		178	must not enlarge or modify the read buffer, you can only remove data at
		179	the beginning from it.
112		180
113	When an EOF condition is detected then AnyEvent::Handle will first try to	181	When an EOF condition is detected then AnyEvent::Handle will first try to
114	feed all the remaining data to the queued callbacks and C<on_read> before	182	feed all the remaining data to the queued callbacks and C<on_read> before
115	calling the C<on_eof> callback. If no progress can be made, then a fatal	183	calling the C<on_eof> callback. If no progress can be made, then a fatal
116	error will be raised (with C<$!> set to C<EPIPE>).	184	error will be raised (with C<$!> set to C<EPIPE>).
117		185
		186	Note that, unlike requests in the read queue, an C<on_read> callback
		187	doesn't mean you I<require> some data: if there is an EOF and there
		188	are outstanding read requests then an error will be flagged. With an
		189	C<on_read> callback, the C<on_eof> callback will be invoked.
		190
		191	=item on_eof => $cb->($handle)
		192
		193	Set the callback to be called when an end-of-file condition is detected,
		194	i.e. in the case of a socket, when the other side has closed the
		195	connection cleanly, and there are no outstanding read requests in the
		196	queue (if there are read requests, then an EOF counts as an unexpected
		197	connection close and will be flagged as an error).
		198
		199	For sockets, this just means that the other side has stopped sending data,
		200	you can still try to write data, and, in fact, one can return from the EOF
		201	callback and continue writing data, as only the read part has been shut
		202	down.
		203
		204	If an EOF condition has been detected but no C<on_eof> callback has been
		205	set, then a fatal error will be raised with C<$!> set to <0>.
		206
118	=item on_drain => $cb->($handle)	207	=item on_drain => $cb->($handle)
119		208
120	This sets the callback that is called when the write buffer becomes empty	209	This sets the callback that is called when the write buffer becomes empty
121	(or when the callback is set and the buffer is empty already).	210	(or when the callback is set and the buffer is empty already).
122		211
123	To append to the write buffer, use the C<< ->push_write >> method.	212	To append to the write buffer, use the C<< ->push_write >> method.
124		213
		214	This callback is useful when you don't want to put all of your write data
		215	into the queue at once, for example, when you want to write the contents
		216	of some file to the socket you might not want to read the whole file into
		217	memory and push it into the queue, but instead only read more data from
		218	the file when the write queue becomes empty.
		219
		220	=item timeout => $fractional_seconds
		221
		222	=item rtimeout => $fractional_seconds
		223
		224	=item wtimeout => $fractional_seconds
		225
		226	If non-zero, then these enables an "inactivity" timeout: whenever this
		227	many seconds pass without a successful read or write on the underlying
		228	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
		229	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		230	error will be raised).
		231
		232	There are three variants of the timeouts that work fully independent
		233	of each other, for both read and write, just read, and just write:
		234	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		235	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		236	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		237
		238	Note that timeout processing is also active when you currently do not have
		239	any outstanding read or write requests: If you plan to keep the connection
		240	idle then you should disable the timout temporarily or ignore the timeout
		241	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		242	restart the timeout.
		243
		244	Zero (the default) disables this timeout.
		245
		246	=item on_timeout => $cb->($handle)
		247
		248	Called whenever the inactivity timeout passes. If you return from this
		249	callback, then the timeout will be reset as if some activity had happened,
		250	so this condition is not fatal in any way.
		251
125	=item rbuf_max => <bytes>	252	=item rbuf_max => <bytes>
126		253
127	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	254	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
128	when the read buffer ever (strictly) exceeds this size. This is useful to	255	when the read buffer ever (strictly) exceeds this size. This is useful to
129	avoid denial-of-service attacks.	256	avoid some forms of denial-of-service attacks.
130		257
131	For example, a server accepting connections from untrusted sources should	258	For example, a server accepting connections from untrusted sources should
132	be configured to accept only so-and-so much data that it cannot act on	259	be configured to accept only so-and-so much data that it cannot act on
133	(for example, when expecting a line, an attacker could send an unlimited	260	(for example, when expecting a line, an attacker could send an unlimited
134	amount of data without a callback ever being called as long as the line	261	amount of data without a callback ever being called as long as the line
135	isn't finished).	262	isn't finished).
136		263
		264	=item autocork => <boolean>
		265
		266	When disabled (the default), then C<push_write> will try to immediately
		267	write the data to the handle, if possible. This avoids having to register
		268	a write watcher and wait for the next event loop iteration, but can
		269	be inefficient if you write multiple small chunks (on the wire, this
		270	disadvantage is usually avoided by your kernel's nagle algorithm, see
		271	C<no_delay>, but this option can save costly syscalls).
		272
		273	When enabled, then writes will always be queued till the next event loop
		274	iteration. This is efficient when you do many small writes per iteration,
		275	but less efficient when you do a single write only per iteration (or when
		276	the write buffer often is full). It also increases write latency.
		277
		278	=item no_delay => <boolean>
		279
		280	When doing small writes on sockets, your operating system kernel might
		281	wait a bit for more data before actually sending it out. This is called
		282	the Nagle algorithm, and usually it is beneficial.
		283
		284	In some situations you want as low a delay as possible, which can be
		285	accomplishd by setting this option to a true value.
		286
		287	The default is your opertaing system's default behaviour (most likely
		288	enabled), this option explicitly enables or disables it, if possible.
		289
		290	=item keepalive => <boolean>
		291
		292	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		293	normally, TCP connections have no time-out once established, so TCP
		294	conenctions, once established, can stay alive forever even when the other
		295	side has long gone. TCP keepalives are a cheap way to take down long-lived
		296	TCP connections whent he other side becomes unreachable. While the default
		297	is OS-dependent, TCP keepalives usually kick in after around two hours,
		298	and, if the other side doesn't reply, take down the TCP connection some 10
		299	to 15 minutes later.
		300
		301	It is harmless to specify this option for file handles that do not support
		302	keepalives, and enabling it on connections that are potentially long-lived
		303	is usually a good idea.
		304
		305	=item oobinline => <boolean>
		306
		307	BSD majorly fucked up the implementation of TCP urgent data. The result
		308	is that almost no OS implements TCP according to the specs, and every OS
		309	implements it slightly differently.
		310
		311	If you want to handle TCP urgent data, then setting this flag (the default
		312	is enabled) gives you the most portable way of getting urgent data, by
		313	putting it into the stream.
		314
		315	Since BSD emulation of OOB data on top of TCP's urgent data can have
		316	security implications, AnyEvent::Handle sets this flag automatically
		317	unless explicitly specified.
		318
137	=item read_size => <bytes>	319	=item read_size => <bytes>
138		320
139	The default read block size (the amount of bytes this module will try to read	321	The default read block size (the amount of bytes this module will
140	on each [loop iteration). Default: C<4096>.	322	try to read during each loop iteration, which affects memory
		323	requirements). Default: C<8192>.
141		324
142	=item low_water_mark => <bytes>	325	=item low_water_mark => <bytes>
143		326
144	Sets the amount of bytes (default: C<0>) that make up an "empty" write	327	Sets the amount of bytes (default: C<0>) that make up an "empty" write
145	buffer: If the write reaches this size or gets even samller it is	328	buffer: If the write reaches this size or gets even samller it is
146	considered empty.	329	considered empty.
147		330
		331	Sometimes it can be beneficial (for performance reasons) to add data to
		332	the write buffer before it is fully drained, but this is a rare case, as
		333	the operating system kernel usually buffers data as well, so the default
		334	is good in almost all cases.
		335
		336	=item linger => <seconds>
		337
		338	If non-zero (default: C<3600>), then the destructor of the
		339	AnyEvent::Handle object will check whether there is still outstanding
		340	write data and will install a watcher that will write this data to the
		341	socket. No errors will be reported (this mostly matches how the operating
		342	system treats outstanding data at socket close time).
		343
		344	This will not work for partial TLS data that could not be encoded
		345	yet. This data will be lost. Calling the C<stoptls> method in time might
		346	help.
		347
		348	=item peername => $string
		349
		350	A string used to identify the remote site - usually the DNS hostname
		351	(I<not> IDN!) used to create the connection, rarely the IP address.
		352
		353	Apart from being useful in error messages, this string is also used in TLS
		354	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		355	verification will be skipped when C<peername> is not specified or
		356	C<undef>.
		357
148	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	358	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
149		359
150	When this parameter is given, it enables TLS (SSL) mode, that means it	360	When this parameter is given, it enables TLS (SSL) mode, that means
151	will start making tls handshake and will transparently encrypt/decrypt	361	AnyEvent will start a TLS handshake as soon as the conenction has been
152	data.	362	established and will transparently encrypt/decrypt data afterwards.
		363
		364	All TLS protocol errors will be signalled as C<EPROTO>, with an
		365	appropriate error message.
153		366
154	TLS mode requires Net::SSLeay to be installed (it will be loaded	367	TLS mode requires Net::SSLeay to be installed (it will be loaded
155	automatically when you try to create a TLS handle).	368	automatically when you try to create a TLS handle): this module doesn't
		369	have a dependency on that module, so if your module requires it, you have
		370	to add the dependency yourself.
156		371
157	For the TLS server side, use C<accept>, and for the TLS client side of a	372	Unlike TCP, TLS has a server and client side: for the TLS server side, use
158	connection, use C<connect> mode.	373	C<accept>, and for the TLS client side of a connection, use C<connect>
		374	mode.
159		375
160	You can also provide your own TLS connection object, but you have	376	You can also provide your own TLS connection object, but you have
161	to make sure that you call either C<Net::SSLeay::set_connect_state>	377	to make sure that you call either C<Net::SSLeay::set_connect_state>
162	or C<Net::SSLeay::set_accept_state> on it before you pass it to	378	or C<Net::SSLeay::set_accept_state> on it before you pass it to
163	AnyEvent::Handle.	379	AnyEvent::Handle. Also, this module will take ownership of this connection
		380	object.
164		381
		382	At some future point, AnyEvent::Handle might switch to another TLS
		383	implementation, then the option to use your own session object will go
		384	away.
		385
		386	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		387	passing in the wrong integer will lead to certain crash. This most often
		388	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		389	segmentation fault.
		390
165	See the C<starttls> method if you need to start TLs negotiation later.	391	See the C<< ->starttls >> method for when need to start TLS negotiation later.
166		392
167	=item tls_ctx => $ssl_ctx	393	=item tls_ctx => $anyevent_tls
168		394
169	Use the given Net::SSLeay::CTX object to create the new TLS connection	395	Use the given C<AnyEvent::TLS> object to create the new TLS connection
170	(unless a connection object was specified directly). If this parameter is	396	(unless a connection object was specified directly). If this parameter is
171	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	397	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
172		398
		399	Instead of an object, you can also specify a hash reference with C<< key
		400	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		401	new TLS context object.
		402
		403	=item on_starttls => $cb->($handle, $success[, $error_message])
		404
		405	This callback will be invoked when the TLS/SSL handshake has finished. If
		406	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		407	(C<on_stoptls> will not be called in this case).
		408
		409	The session in C<< $handle->{tls} >> can still be examined in this
		410	callback, even when the handshake was not successful.
		411
		412	TLS handshake failures will not cause C<on_error> to be invoked when this
		413	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		414
		415	Without this callback, handshake failures lead to C<on_error> being
		416	called, as normal.
		417
		418	Note that you cannot call C<starttls> right again in this callback. If you
		419	need to do that, start an zero-second timer instead whose callback can
		420	then call C<< ->starttls >> again.
		421
		422	=item on_stoptls => $cb->($handle)
		423
		424	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		425	set, then it will be invoked after freeing the TLS session. If it is not,
		426	then a TLS shutdown condition will be treated like a normal EOF condition
		427	on the handle.
		428
		429	The session in C<< $handle->{tls} >> can still be examined in this
		430	callback.
		431
		432	This callback will only be called on TLS shutdowns, not when the
		433	underlying handle signals EOF.
		434
173	=item json => JSON or JSON::XS object	435	=item json => JSON or JSON::XS object
174		436
175	This is the json coder object used by the C<json> read and write types.	437	This is the json coder object used by the C<json> read and write types.
176		438
177	If you don't supply it, then AnyEvent::Handle will use C<encode_json> and	439	If you don't supply it, then AnyEvent::Handle will create and use a
178	C<decode_json>.	440	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		441	texts.
179		442
180	Note that you are responsible to depend on the JSON module if you want to	443	Note that you are responsible to depend on the JSON module if you want to
181	use this functionality, as AnyEvent does not have a dependency itself.	444	use this functionality, as AnyEvent does not have a dependency itself.
182		445
183	=item filter_r => $cb
184
185	=item filter_w => $cb
186
187	These exist, but are undocumented at this time.
188
189	=back	446	=back
190		447
191	=cut	448	=cut
192		449
193	sub new {	450	sub new {
194	my $class = shift;	451	my $class = shift;
195
196	my $self = bless { @_ }, $class;	452	my $self = bless { @_ }, $class;
197		453
198	$self->{fh} or Carp::croak "mandatory argument fh is missing";	454	if ($self->{fh}) {
		455	$self->_start;
		456	return unless $self->{fh}; # could be gone by now
		457
		458	} elsif ($self->{connect}) {
		459	require AnyEvent::Socket;
		460
		461	$self->{peername} = $self->{connect}[0]
		462	unless exists $self->{peername};
		463
		464	$self->{_skip_drain_rbuf} = 1;
		465
		466	{
		467	Scalar::Util::weaken (my $self = $self);
		468
		469	$self->{_connect} =
		470	AnyEvent::Socket::tcp_connect (
		471	$self->{connect}[0],
		472	$self->{connect}[1],
		473	sub {
		474	my ($fh, $host, $port, $retry) = @_;
		475
		476	if ($fh) {
		477	$self->{fh} = $fh;
		478
		479	delete $self->{_skip_drain_rbuf};
		480	$self->_start;
		481
		482	$self->{on_connect}
		483	and $self->{on_connect}($self, $host, $port, sub {
		484	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		485	$self->{_skip_drain_rbuf} = 1;
		486	&$retry;
		487	});
		488
		489	} else {
		490	if ($self->{on_connect_error}) {
		491	$self->{on_connect_error}($self, "$!");
		492	$self->destroy;
		493	} else {
		494	$self->_error ($!, 1);
		495	}
		496	}
		497	},
		498	sub {
		499	local $self->{fh} = $_[0];
		500
		501	$self->{on_prepare}
		502	? $self->{on_prepare}->($self)
		503	: ()
		504	}
		505	);
		506	}
		507
		508	} else {
		509	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		510	}
		511
		512	$self
		513	}
		514
		515	sub _start {
		516	my ($self) = @_;
199		517
200	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	518	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
201		519
202	if ($self->{tls}) {	520	$self->{_activity} =
203	require Net::SSLeay;	521	$self->{_ractivity} =
		522	$self->{_wactivity} = AE::now;
		523
		524	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		525	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		526	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		527
		528	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		529	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		530
		531	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		532
204	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	533	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
205	}	534	if $self->{tls};
206		535
207	$self->on_eof (delete $self->{on_eof} ) if $self->{on_eof};
208	$self->on_error (delete $self->{on_error}) if $self->{on_error};
209	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	536	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
210	$self->on_read (delete $self->{on_read} ) if $self->{on_read};
211		537
212	$self->start_read;	538	$self->start_read
		539	if $self->{on_read} || @{ $self->{_queue} };
213		540
214	$self	541	$self->_drain_wbuf;
215	}	542	}
216		543
217	sub _shutdown {
218	my ($self) = @_;
219
220	delete $self->{_rw};
221	delete $self->{_ww};
222	delete $self->{fh};
223	}
224
225	sub error {	544	sub _error {
226	my ($self) = @_;	545	my ($self, $errno, $fatal, $message) = @_;
227		546
228	{	547	$! = $errno;
229	local $!;	548	$message ||= "$!";
230	$self->_shutdown;
231	}
232		549
233	$self->{on_error}($self)
234	if $self->{on_error};	550	if ($self->{on_error}) {
235		551	$self->{on_error}($self, $fatal, $message);
		552	$self->destroy if $fatal;
		553	} elsif ($self->{fh}) {
		554	$self->destroy;
236	Carp::croak "AnyEvent::Handle uncaught fatal error: $!";	555	Carp::croak "AnyEvent::Handle uncaught error: $message";
		556	}
237	}	557	}
238		558
239	=item $fh = $handle->fh	559	=item $fh = $handle->fh
240		560
241	This method returns the file handle of the L<AnyEvent::Handle> object.	561	This method returns the file handle used to create the L<AnyEvent::Handle> object.
242		562
243	=cut	563	=cut
244		564
245	sub fh { $_[0]{fh} }	565	sub fh { $_[0]{fh} }
246		566
…		…
262		582
263	sub on_eof {	583	sub on_eof {
264	$_[0]{on_eof} = $_[1];	584	$_[0]{on_eof} = $_[1];
265	}	585	}
266		586
		587	=item $handle->on_timeout ($cb)
		588
		589	=item $handle->on_rtimeout ($cb)
		590
		591	=item $handle->on_wtimeout ($cb)
		592
		593	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
		594	callback, or disables the callback (but not the timeout) if C<$cb> =
		595	C<undef>. See the C<timeout> constructor argument and method.
		596
		597	=cut
		598
		599	# see below
		600
		601	=item $handle->autocork ($boolean)
		602
		603	Enables or disables the current autocork behaviour (see C<autocork>
		604	constructor argument). Changes will only take effect on the next write.
		605
		606	=cut
		607
		608	sub autocork {
		609	$_[0]{autocork} = $_[1];
		610	}
		611
		612	=item $handle->no_delay ($boolean)
		613
		614	Enables or disables the C<no_delay> setting (see constructor argument of
		615	the same name for details).
		616
		617	=cut
		618
		619	sub no_delay {
		620	$_[0]{no_delay} = $_[1];
		621
		622	eval {
		623	local $SIG{__DIE__};
		624	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		625	if $_[0]{fh};
		626	};
		627	}
		628
		629	=item $handle->keepalive ($boolean)
		630
		631	Enables or disables the C<keepalive> setting (see constructor argument of
		632	the same name for details).
		633
		634	=cut
		635
		636	sub keepalive {
		637	$_[0]{keepalive} = $_[1];
		638
		639	eval {
		640	local $SIG{__DIE__};
		641	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		642	if $_[0]{fh};
		643	};
		644	}
		645
		646	=item $handle->oobinline ($boolean)
		647
		648	Enables or disables the C<oobinline> setting (see constructor argument of
		649	the same name for details).
		650
		651	=cut
		652
		653	sub oobinline {
		654	$_[0]{oobinline} = $_[1];
		655
		656	eval {
		657	local $SIG{__DIE__};
		658	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		659	if $_[0]{fh};
		660	};
		661	}
		662
		663	=item $handle->keepalive ($boolean)
		664
		665	Enables or disables the C<keepalive> setting (see constructor argument of
		666	the same name for details).
		667
		668	=cut
		669
		670	sub keepalive {
		671	$_[0]{keepalive} = $_[1];
		672
		673	eval {
		674	local $SIG{__DIE__};
		675	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		676	if $_[0]{fh};
		677	};
		678	}
		679
		680	=item $handle->on_starttls ($cb)
		681
		682	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		683
		684	=cut
		685
		686	sub on_starttls {
		687	$_[0]{on_starttls} = $_[1];
		688	}
		689
		690	=item $handle->on_stoptls ($cb)
		691
		692	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		693
		694	=cut
		695
		696	sub on_starttls {
		697	$_[0]{on_stoptls} = $_[1];
		698	}
		699
		700	=item $handle->rbuf_max ($max_octets)
		701
		702	Configures the C<rbuf_max> setting (C<undef> disables it).
		703
		704	=cut
		705
		706	sub rbuf_max {
		707	$_[0]{rbuf_max} = $_[1];
		708	}
		709
		710	#############################################################################
		711
		712	=item $handle->timeout ($seconds)
		713
		714	=item $handle->rtimeout ($seconds)
		715
		716	=item $handle->wtimeout ($seconds)
		717
		718	Configures (or disables) the inactivity timeout.
		719
		720	=item $handle->timeout_reset
		721
		722	=item $handle->rtimeout_reset
		723
		724	=item $handle->wtimeout_reset
		725
		726	Reset the activity timeout, as if data was received or sent.
		727
		728	These methods are cheap to call.
		729
		730	=cut
		731
		732	for my $dir ("", "r", "w") {
		733	my $timeout = "${dir}timeout";
		734	my $tw = "_${dir}tw";
		735	my $on_timeout = "on_${dir}timeout";
		736	my $activity = "_${dir}activity";
		737	my $cb;
		738
		739	*$on_timeout = sub {
		740	$_[0]{$on_timeout} = $_[1];
		741	};
		742
		743	*$timeout = sub {
		744	my ($self, $new_value) = @_;
		745
		746	$self->{$timeout} = $new_value;
		747	delete $self->{$tw}; &$cb;
		748	};
		749
		750	*{"${dir}timeout_reset"} = sub {
		751	$_[0]{$activity} = AE::now;
		752	};
		753
		754	# main workhorse:
		755	# reset the timeout watcher, as neccessary
		756	# also check for time-outs
		757	$cb = sub {
		758	my ($self) = @_;
		759
		760	if ($self->{$timeout} && $self->{fh}) {
		761	my $NOW = AE::now;
		762
		763	# when would the timeout trigger?
		764	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
		765
		766	# now or in the past already?
		767	if ($after <= 0) {
		768	$self->{$activity} = $NOW;
		769
		770	if ($self->{$on_timeout}) {
		771	$self->{$on_timeout}($self);
		772	} else {
		773	$self->_error (Errno::ETIMEDOUT);
		774	}
		775
		776	# callback could have changed timeout value, optimise
		777	return unless $self->{$timeout};
		778
		779	# calculate new after
		780	$after = $self->{$timeout};
		781	}
		782
		783	Scalar::Util::weaken $self;
		784	return unless $self; # ->error could have destroyed $self
		785
		786	$self->{$tw} ||= AE::timer $after, 0, sub {
		787	delete $self->{$tw};
		788	$cb->($self);
		789	};
		790	} else {
		791	delete $self->{$tw};
		792	}
		793	}
		794	}
		795
267	#############################################################################	796	#############################################################################
268		797
269	=back	798	=back
270		799
271	=head2 WRITE QUEUE	800	=head2 WRITE QUEUE
…		…
292	my ($self, $cb) = @_;	821	my ($self, $cb) = @_;
293		822
294	$self->{on_drain} = $cb;	823	$self->{on_drain} = $cb;
295		824
296	$cb->($self)	825	$cb->($self)
297	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	826	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
298	}	827	}
299		828
300	=item $handle->push_write ($data)	829	=item $handle->push_write ($data)
301		830
302	Queues the given scalar to be written. You can push as much data as you	831	Queues the given scalar to be written. You can push as much data as you
…		…
313	Scalar::Util::weaken $self;	842	Scalar::Util::weaken $self;
314		843
315	my $cb = sub {	844	my $cb = sub {
316	my $len = syswrite $self->{fh}, $self->{wbuf};	845	my $len = syswrite $self->{fh}, $self->{wbuf};
317		846
318	if ($len >= 0) {	847	if (defined $len) {
319	substr $self->{wbuf}, 0, $len, "";	848	substr $self->{wbuf}, 0, $len, "";
320		849
		850	$self->{_activity} = $self->{_wactivity} = AE::now;
		851
321	$self->{on_drain}($self)	852	$self->{on_drain}($self)
322	if $self->{low_water_mark} >= length $self->{wbuf}	853	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
323	&& $self->{on_drain};	854	&& $self->{on_drain};
324		855
325	delete $self->{_ww} unless length $self->{wbuf};	856	delete $self->{_ww} unless length $self->{wbuf};
326	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAWOULDBLOCK) {	857	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
327	$self->error;	858	$self->_error ($!, 1);
328	}	859	}
329	};	860	};
330		861
331	# try to write data immediately	862	# try to write data immediately
332	$cb->();	863	$cb->() unless $self->{autocork};
333		864
334	# if still data left in wbuf, we need to poll	865	# if still data left in wbuf, we need to poll
335	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	866	$self->{_ww} = AE::io $self->{fh}, 1, $cb
336	if length $self->{wbuf};	867	if length $self->{wbuf};
337	};	868	};
338	}	869	}
339		870
340	our %WH;	871	our %WH;
…		…
351		882
352	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	883	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
353	->($self, @_);	884	->($self, @_);
354	}	885	}
355		886
356	if ($self->{filter_w}) {	887	if ($self->{tls}) {
357	$self->{filter_w}->($self, \$_[0]);	888	$self->{_tls_wbuf} .= $_[0];
		889	&_dotls ($self) if $self->{fh};
358	} else {	890	} else {
359	$self->{wbuf} .= $_[0];	891	$self->{wbuf} .= $_[0];
360	$self->_drain_wbuf;	892	$self->_drain_wbuf if $self->{fh};
361	}	893	}
362	}	894	}
363		895
364	=item $handle->push_write (type => @args)	896	=item $handle->push_write (type => @args)
365
366	=item $handle->unshift_write (type => @args)
367		897
368	Instead of formatting your data yourself, you can also let this module do	898	Instead of formatting your data yourself, you can also let this module do
369	the job by specifying a type and type-specific arguments.	899	the job by specifying a type and type-specific arguments.
370		900
371	Predefined types are (if you have ideas for additional types, feel free to	901	Predefined types are (if you have ideas for additional types, feel free to
…		…
376	=item netstring => $string	906	=item netstring => $string
377		907
378	Formats the given value as netstring	908	Formats the given value as netstring
379	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).	909	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).
380		910
381	=back
382
383	=cut	911	=cut
384		912
385	register_write_type netstring => sub {	913	register_write_type netstring => sub {
386	my ($self, $string) = @_;	914	my ($self, $string) = @_;
387		915
388	sprintf "%d:%s,", (length $string), $string	916	(length $string) . ":$string,"
		917	};
		918
		919	=item packstring => $format, $data
		920
		921	An octet string prefixed with an encoded length. The encoding C<$format>
		922	uses the same format as a Perl C<pack> format, but must specify a single
		923	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		924	optional C<!>, C<< < >> or C<< > >> modifier).
		925
		926	=cut
		927
		928	register_write_type packstring => sub {
		929	my ($self, $format, $string) = @_;
		930
		931	pack "$format/a*", $string
389	};	932	};
390		933
391	=item json => $array_or_hashref	934	=item json => $array_or_hashref
392		935
393	Encodes the given hash or array reference into a JSON object. Unless you	936	Encodes the given hash or array reference into a JSON object. Unless you
…		…
396		939
397	JSON objects (and arrays) are self-delimiting, so you can write JSON at	940	JSON objects (and arrays) are self-delimiting, so you can write JSON at
398	one end of a handle and read them at the other end without using any	941	one end of a handle and read them at the other end without using any
399	additional framing.	942	additional framing.
400		943
		944	The generated JSON text is guaranteed not to contain any newlines: While
		945	this module doesn't need delimiters after or between JSON texts to be
		946	able to read them, many other languages depend on that.
		947
		948	A simple RPC protocol that interoperates easily with others is to send
		949	JSON arrays (or objects, although arrays are usually the better choice as
		950	they mimic how function argument passing works) and a newline after each
		951	JSON text:
		952
		953	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
		954	$handle->push_write ("\012");
		955
		956	An AnyEvent::Handle receiver would simply use the C<json> read type and
		957	rely on the fact that the newline will be skipped as leading whitespace:
		958
		959	$handle->push_read (json => sub { my $array = $_[1]; ... });
		960
		961	Other languages could read single lines terminated by a newline and pass
		962	this line into their JSON decoder of choice.
		963
401	=cut	964	=cut
		965
		966	sub json_coder() {
		967	eval { require JSON::XS; JSON::XS->new->utf8 }
		968	|| do { require JSON; JSON->new->utf8 }
		969	}
402		970
403	register_write_type json => sub {	971	register_write_type json => sub {
404	my ($self, $ref) = @_;	972	my ($self, $ref) = @_;
405		973
406	require JSON;	974	my $json = $self->{json} ||= json_coder;
407		975
408	$self->{json} ? $self->{json}->encode ($ref)	976	$json->encode ($ref)
409	: JSON::encode_json ($ref)
410	};	977	};
		978
		979	=item storable => $reference
		980
		981	Freezes the given reference using L<Storable> and writes it to the
		982	handle. Uses the C<nfreeze> format.
		983
		984	=cut
		985
		986	register_write_type storable => sub {
		987	my ($self, $ref) = @_;
		988
		989	require Storable;
		990
		991	pack "w/a*", Storable::nfreeze ($ref)
		992	};
		993
		994	=back
		995
		996	=item $handle->push_shutdown
		997
		998	Sometimes you know you want to close the socket after writing your data
		999	before it was actually written. One way to do that is to replace your
		1000	C<on_drain> handler by a callback that shuts down the socket (and set
		1001	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1002	replaces the C<on_drain> callback with:
		1003
		1004	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1005
		1006	This simply shuts down the write side and signals an EOF condition to the
		1007	the peer.
		1008
		1009	You can rely on the normal read queue and C<on_eof> handling
		1010	afterwards. This is the cleanest way to close a connection.
		1011
		1012	=cut
		1013
		1014	sub push_shutdown {
		1015	my ($self) = @_;
		1016
		1017	delete $self->{low_water_mark};
		1018	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1019	}
411		1020
412	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1021	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
413		1022
414	This function (not method) lets you add your own types to C<push_write>.	1023	This function (not method) lets you add your own types to C<push_write>.
415	Whenever the given C<type> is used, C<push_write> will invoke the code	1024	Whenever the given C<type> is used, C<push_write> will invoke the code
…		…
436	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1045	ways, the "simple" way, using only C<on_read> and the "complex" way, using
437	a queue.	1046	a queue.
438		1047
439	In the simple case, you just install an C<on_read> callback and whenever	1048	In the simple case, you just install an C<on_read> callback and whenever
440	new data arrives, it will be called. You can then remove some data (if	1049	new data arrives, it will be called. You can then remove some data (if
441	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	1050	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
442	or not.	1051	leave the data there if you want to accumulate more (e.g. when only a
		1052	partial message has been received so far).
443		1053
444	In the more complex case, you want to queue multiple callbacks. In this	1054	In the more complex case, you want to queue multiple callbacks. In this
445	case, AnyEvent::Handle will call the first queued callback each time new	1055	case, AnyEvent::Handle will call the first queued callback each time new
446	data arrives and removes it when it has done its job (see C<push_read>,	1056	data arrives (also the first time it is queued) and removes it when it has
447	below).	1057	done its job (see C<push_read>, below).
448		1058
449	This way you can, for example, push three line-reads, followed by reading	1059	This way you can, for example, push three line-reads, followed by reading
450	a chunk of data, and AnyEvent::Handle will execute them in order.	1060	a chunk of data, and AnyEvent::Handle will execute them in order.
451		1061
452	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	1062	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
453	the specified number of bytes which give an XML datagram.	1063	the specified number of bytes which give an XML datagram.
454		1064
455	# in the default state, expect some header bytes	1065	# in the default state, expect some header bytes
456	$handle->on_read (sub {	1066	$handle->on_read (sub {
457	# some data is here, now queue the length-header-read (4 octets)	1067	# some data is here, now queue the length-header-read (4 octets)
458	shift->unshift_read_chunk (4, sub {	1068	shift->unshift_read (chunk => 4, sub {
459	# header arrived, decode	1069	# header arrived, decode
460	my $len = unpack "N", $_[1];	1070	my $len = unpack "N", $_[1];
461		1071
462	# now read the payload	1072	# now read the payload
463	shift->unshift_read_chunk ($len, sub {	1073	shift->unshift_read (chunk => $len, sub {
464	my $xml = $_[1];	1074	my $xml = $_[1];
465	# handle xml	1075	# handle xml
466	});	1076	});
467	});	1077	});
468	});	1078	});
469		1079
470	Example 2: Implement a client for a protocol that replies either with	1080	Example 2: Implement a client for a protocol that replies either with "OK"
471	"OK" and another line or "ERROR" for one request, and 64 bytes for the	1081	and another line or "ERROR" for the first request that is sent, and 64
472	second request. Due tot he availability of a full queue, we can just	1082	bytes for the second request. Due to the availability of a queue, we can
473	pipeline sending both requests and manipulate the queue as necessary in	1083	just pipeline sending both requests and manipulate the queue as necessary
474	the callbacks:	1084	in the callbacks.
475		1085
476	# request one	1086	When the first callback is called and sees an "OK" response, it will
		1087	C<unshift> another line-read. This line-read will be queued I<before> the
		1088	64-byte chunk callback.
		1089
		1090	# request one, returns either "OK + extra line" or "ERROR"
477	$handle->push_write ("request 1\015\012");	1091	$handle->push_write ("request 1\015\012");
478		1092
479	# we expect "ERROR" or "OK" as response, so push a line read	1093	# we expect "ERROR" or "OK" as response, so push a line read
480	$handle->push_read_line (sub {	1094	$handle->push_read (line => sub {
481	# if we got an "OK", we have to _prepend_ another line,	1095	# if we got an "OK", we have to _prepend_ another line,
482	# so it will be read before the second request reads its 64 bytes	1096	# so it will be read before the second request reads its 64 bytes
483	# which are already in the queue when this callback is called	1097	# which are already in the queue when this callback is called
484	# we don't do this in case we got an error	1098	# we don't do this in case we got an error
485	if ($_[1] eq "OK") {	1099	if ($_[1] eq "OK") {
486	$_[0]->unshift_read_line (sub {	1100	$_[0]->unshift_read (line => sub {
487	my $response = $_[1];	1101	my $response = $_[1];
488	...	1102	...
489	});	1103	});
490	}	1104	}
491	});	1105	});
492		1106
493	# request two	1107	# request two, simply returns 64 octets
494	$handle->push_write ("request 2\015\012");	1108	$handle->push_write ("request 2\015\012");
495		1109
496	# simply read 64 bytes, always	1110	# simply read 64 bytes, always
497	$handle->push_read_chunk (64, sub {	1111	$handle->push_read (chunk => 64, sub {
498	my $response = $_[1];	1112	my $response = $_[1];
499	...	1113	...
500	});	1114	});
501		1115
502	=over 4	1116	=over 4
503		1117
504	=cut	1118	=cut
505		1119
506	sub _drain_rbuf {	1120	sub _drain_rbuf {
507	my ($self) = @_;	1121	my ($self) = @_;
		1122
		1123	# avoid recursion
		1124	return if $self->{_skip_drain_rbuf};
		1125	local $self->{_skip_drain_rbuf} = 1;
		1126
		1127	while () {
		1128	# we need to use a separate tls read buffer, as we must not receive data while
		1129	# we are draining the buffer, and this can only happen with TLS.
		1130	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1131	if exists $self->{_tls_rbuf};
		1132
		1133	my $len = length $self->{rbuf};
		1134
		1135	if (my $cb = shift @{ $self->{_queue} }) {
		1136	unless ($cb->($self)) {
		1137	# no progress can be made
		1138	# (not enough data and no data forthcoming)
		1139	$self->_error (Errno::EPIPE, 1), return
		1140	if $self->{_eof};
		1141
		1142	unshift @{ $self->{_queue} }, $cb;
		1143	last;
		1144	}
		1145	} elsif ($self->{on_read}) {
		1146	last unless $len;
		1147
		1148	$self->{on_read}($self);
		1149
		1150	if (
		1151	$len == length $self->{rbuf} # if no data has been consumed
		1152	&& !@{ $self->{_queue} } # and the queue is still empty
		1153	&& $self->{on_read} # but we still have on_read
		1154	) {
		1155	# no further data will arrive
		1156	# so no progress can be made
		1157	$self->_error (Errno::EPIPE, 1), return
		1158	if $self->{_eof};
		1159
		1160	last; # more data might arrive
		1161	}
		1162	} else {
		1163	# read side becomes idle
		1164	delete $self->{_rw} unless $self->{tls};
		1165	last;
		1166	}
		1167	}
		1168
		1169	if ($self->{_eof}) {
		1170	$self->{on_eof}
		1171	? $self->{on_eof}($self)
		1172	: $self->_error (0, 1, "Unexpected end-of-file");
		1173
		1174	return;
		1175	}
508		1176
509	if (	1177	if (
510	defined $self->{rbuf_max}	1178	defined $self->{rbuf_max}
511	&& $self->{rbuf_max} < length $self->{rbuf}	1179	&& $self->{rbuf_max} < length $self->{rbuf}
512	) {	1180	) {
513	$! = &Errno::ENOSPC;	1181	$self->_error (Errno::ENOSPC, 1), return;
514	$self->error;
515	}	1182	}
516		1183
517	return if $self->{in_drain};	1184	# may need to restart read watcher
518	local $self->{in_drain} = 1;	1185	unless ($self->{_rw}) {
519		1186	$self->start_read
520	while (my $len = length $self->{rbuf}) {	1187	if $self->{on_read} || @{ $self->{_queue} };
521	no strict 'refs';
522	if (my $cb = shift @{ $self->{_queue} }) {
523	unless ($cb->($self)) {
524	if ($self->{_eof}) {
525	# no progress can be made (not enough data and no data forthcoming)
526	$! = &Errno::EPIPE;
527	$self->error;
528	}
529
530	unshift @{ $self->{_queue} }, $cb;
531	return;
532	}
533	} elsif ($self->{on_read}) {
534	$self->{on_read}($self);
535
536	if (
537	$self->{_eof} # if no further data will arrive
538	&& $len == length $self->{rbuf} # and no data has been consumed
539	&& !@{ $self->{_queue} } # and the queue is still empty
540	&& $self->{on_read} # and we still want to read data
541	) {
542	# then no progress can be made
543	$! = &Errno::EPIPE;
544	$self->error;
545	}
546	} else {
547	# read side becomes idle
548	delete $self->{_rw};
549	return;
550	}
551	}
552
553	if ($self->{_eof}) {
554	$self->_shutdown;
555	$self->{on_eof}($self)
556	if $self->{on_eof};
557	}	1188	}
558	}	1189	}
559		1190
560	=item $handle->on_read ($cb)	1191	=item $handle->on_read ($cb)
561		1192
…		…
567		1198
568	sub on_read {	1199	sub on_read {
569	my ($self, $cb) = @_;	1200	my ($self, $cb) = @_;
570		1201
571	$self->{on_read} = $cb;	1202	$self->{on_read} = $cb;
		1203	$self->_drain_rbuf if $cb;
572	}	1204	}
573		1205
574	=item $handle->rbuf	1206	=item $handle->rbuf
575		1207
576	Returns the read buffer (as a modifiable lvalue).	1208	Returns the read buffer (as a modifiable lvalue).
577		1209
578	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1210	You can access the read buffer directly as the C<< ->{rbuf} >>
579	you want.	1211	member, if you want. However, the only operation allowed on the
		1212	read buffer (apart from looking at it) is removing data from its
		1213	beginning. Otherwise modifying or appending to it is not allowed and will
		1214	lead to hard-to-track-down bugs.
580		1215
581	NOTE: The read buffer should only be used or modified if the C<on_read>,	1216	NOTE: The read buffer should only be used or modified if the C<on_read>,
582	C<push_read> or C<unshift_read> methods are used. The other read methods	1217	C<push_read> or C<unshift_read> methods are used. The other read methods
583	automatically manage the read buffer.	1218	automatically manage the read buffer.
584		1219
…		…
638	my $type = shift;	1273	my $type = shift;
639		1274
640	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1275	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
641	->($self, $cb, @_);	1276	->($self, $cb, @_);
642	}	1277	}
643
644		1278
645	unshift @{ $self->{_queue} }, $cb;	1279	unshift @{ $self->{_queue} }, $cb;
646	$self->_drain_rbuf;	1280	$self->_drain_rbuf;
647	}	1281	}
648		1282
…		…
681	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1315	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
682	1	1316	1
683	}	1317	}
684	};	1318	};
685		1319
686	# compatibility with older API
687	sub push_read_chunk {
688	$_[0]->push_read (chunk => $_[1], $_[2]);
689	}
690
691	sub unshift_read_chunk {
692	$_[0]->unshift_read (chunk => $_[1], $_[2]);
693	}
694
695	=item line => [$eol, ]$cb->($handle, $line, $eol)	1320	=item line => [$eol, ]$cb->($handle, $line, $eol)
696		1321
697	The callback will be called only once a full line (including the end of	1322	The callback will be called only once a full line (including the end of
698	line marker, C<$eol>) has been read. This line (excluding the end of line	1323	line marker, C<$eol>) has been read. This line (excluding the end of line
699	marker) will be passed to the callback as second argument (C<$line>), and	1324	marker) will be passed to the callback as second argument (C<$line>), and
…		…
714	=cut	1339	=cut
715		1340
716	register_read_type line => sub {	1341	register_read_type line => sub {
717	my ($self, $cb, $eol) = @_;	1342	my ($self, $cb, $eol) = @_;
718		1343
719	$eol = qr|(\015?\012)| if @_ < 3;	1344	if (@_ < 3) {
720	$eol = quotemeta $eol unless ref $eol;	1345	# this is more than twice as fast as the generic code below
721	$eol = qr|^(.*?)($eol)|s;
722
723	sub {	1346	sub {
724	$_[0]{rbuf} =~ s/$eol// or return;	1347	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
725		1348
726	$cb->($_[0], $1, $2);	1349	$cb->($_[0], $1, $2);
727	1
728	}
729	};
730
731	# compatibility with older API
732	sub push_read_line {
733	my $self = shift;
734	$self->push_read (line => @_);
735	}
736
737	sub unshift_read_line {
738	my $self = shift;
739	$self->unshift_read (line => @_);
740	}
741
742	=item netstring => $cb->($handle, $string)
743
744	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
745
746	Throws an error with C<$!> set to EBADMSG on format violations.
747
748	=cut
749
750	register_read_type netstring => sub {
751	my ($self, $cb) = @_;
752
753	sub {
754	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
755	if ($_[0]{rbuf} =~ /[^0-9]/) {
756	$! = &Errno::EBADMSG;
757	$self->error;
758	}	1350	1
759	return;
760	}	1351	}
		1352	} else {
		1353	$eol = quotemeta $eol unless ref $eol;
		1354	$eol = qr|^(.*?)($eol)|s;
761		1355
762	my $len = $1;	1356	sub {
		1357	$_[0]{rbuf} =~ s/$eol// or return;
763		1358
764	$self->unshift_read (chunk => $len, sub {	1359	$cb->($_[0], $1, $2);
765	my $string = $_[1];
766	$_[0]->unshift_read (chunk => 1, sub {
767	if ($_[1] eq ",") {
768	$cb->($_[0], $string);
769	} else {
770	$! = &Errno::EBADMSG;
771	$self->error;
772	}
773	});	1360	1
774	});	1361	}
775
776	1
777	}	1362	}
778	};	1363	};
779		1364
780	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1365	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
781		1366
…		…
833	return 1;	1418	return 1;
834	}	1419	}
835		1420
836	# reject	1421	# reject
837	if ($reject && $$rbuf =~ $reject) {	1422	if ($reject && $$rbuf =~ $reject) {
838	$! = &Errno::EBADMSG;	1423	$self->_error (Errno::EBADMSG);
839	$self->error;
840	}	1424	}
841		1425
842	# skip	1426	# skip
843	if ($skip && $$rbuf =~ $skip) {	1427	if ($skip && $$rbuf =~ $skip) {
844	$data .= substr $$rbuf, 0, $+[0], "";	1428	$data .= substr $$rbuf, 0, $+[0], "";
…		…
846		1430
847	()	1431	()
848	}	1432	}
849	};	1433	};
850		1434
		1435	=item netstring => $cb->($handle, $string)
		1436
		1437	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
		1438
		1439	Throws an error with C<$!> set to EBADMSG on format violations.
		1440
		1441	=cut
		1442
		1443	register_read_type netstring => sub {
		1444	my ($self, $cb) = @_;
		1445
		1446	sub {
		1447	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
		1448	if ($_[0]{rbuf} =~ /[^0-9]/) {
		1449	$self->_error (Errno::EBADMSG);
		1450	}
		1451	return;
		1452	}
		1453
		1454	my $len = $1;
		1455
		1456	$self->unshift_read (chunk => $len, sub {
		1457	my $string = $_[1];
		1458	$_[0]->unshift_read (chunk => 1, sub {
		1459	if ($_[1] eq ",") {
		1460	$cb->($_[0], $string);
		1461	} else {
		1462	$self->_error (Errno::EBADMSG);
		1463	}
		1464	});
		1465	});
		1466
		1467	1
		1468	}
		1469	};
		1470
		1471	=item packstring => $format, $cb->($handle, $string)
		1472
		1473	An octet string prefixed with an encoded length. The encoding C<$format>
		1474	uses the same format as a Perl C<pack> format, but must specify a single
		1475	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1476	optional C<!>, C<< < >> or C<< > >> modifier).
		1477
		1478	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1479	EPP uses a prefix of C<N> (4 octtes).
		1480
		1481	Example: read a block of data prefixed by its length in BER-encoded
		1482	format (very efficient).
		1483
		1484	$handle->push_read (packstring => "w", sub {
		1485	my ($handle, $data) = @_;
		1486	});
		1487
		1488	=cut
		1489
		1490	register_read_type packstring => sub {
		1491	my ($self, $cb, $format) = @_;
		1492
		1493	sub {
		1494	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1495	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
		1496	or return;
		1497
		1498	$format = length pack $format, $len;
		1499
		1500	# bypass unshift if we already have the remaining chunk
		1501	if ($format + $len <= length $_[0]{rbuf}) {
		1502	my $data = substr $_[0]{rbuf}, $format, $len;
		1503	substr $_[0]{rbuf}, 0, $format + $len, "";
		1504	$cb->($_[0], $data);
		1505	} else {
		1506	# remove prefix
		1507	substr $_[0]{rbuf}, 0, $format, "";
		1508
		1509	# read remaining chunk
		1510	$_[0]->unshift_read (chunk => $len, $cb);
		1511	}
		1512
		1513	1
		1514	}
		1515	};
		1516
851	=item json => $cb->($handle, $hash_or_arrayref)	1517	=item json => $cb->($handle, $hash_or_arrayref)
852		1518
853	Reads a JSON object or array, decodes it and passes it to the callback.	1519	Reads a JSON object or array, decodes it and passes it to the
		1520	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
854		1521
855	If a C<json> object was passed to the constructor, then that will be used	1522	If a C<json> object was passed to the constructor, then that will be used
856	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1523	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
857		1524
858	This read type uses the incremental parser available with JSON version	1525	This read type uses the incremental parser available with JSON version
859	2.09 (and JSON::XS version 2.2) and above. You have to provide a	1526	2.09 (and JSON::XS version 2.2) and above. You have to provide a
860	dependency on your own: this module will load the JSON module, but	1527	dependency on your own: this module will load the JSON module, but
861	AnyEvent does not depend on it itself.	1528	AnyEvent does not depend on it itself.
862		1529
863	Since JSON texts are fully self-delimiting, the C<json> read and write	1530	Since JSON texts are fully self-delimiting, the C<json> read and write
864	types are an ideal simple RPC protocol: just exchange JSON datagrams.	1531	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
		1532	the C<json> write type description, above, for an actual example.
865		1533
866	=cut	1534	=cut
867		1535
868	register_read_type json => sub {	1536	register_read_type json => sub {
869	my ($self, $cb, $accept, $reject, $skip) = @_;	1537	my ($self, $cb) = @_;
870		1538
871	require JSON;	1539	my $json = $self->{json} ||= json_coder;
872		1540
873	my $data;	1541	my $data;
874	my $rbuf = \$self->{rbuf};	1542	my $rbuf = \$self->{rbuf};
875		1543
876	my $json = $self->{json} ||= JSON::XS->new->utf8;
877
878	sub {	1544	sub {
879	my $ref = $json->incr_parse ($self->{rbuf});	1545	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
880		1546
881	if ($ref) {	1547	if ($ref) {
882	$self->{rbuf} = $json->incr_text;	1548	$self->{rbuf} = $json->incr_text;
883	$json->incr_text = "";	1549	$json->incr_text = "";
884	$cb->($self, $ref);	1550	$cb->($self, $ref);
885		1551
886	1	1552	1
		1553	} elsif ($@) {
		1554	# error case
		1555	$json->incr_skip;
		1556
		1557	$self->{rbuf} = $json->incr_text;
		1558	$json->incr_text = "";
		1559
		1560	$self->_error (Errno::EBADMSG);
		1561
		1562	()
887	} else {	1563	} else {
888	$self->{rbuf} = "";	1564	$self->{rbuf} = "";
		1565
889	()	1566	()
890	}	1567	}
		1568	}
		1569	};
		1570
		1571	=item storable => $cb->($handle, $ref)
		1572
		1573	Deserialises a L<Storable> frozen representation as written by the
		1574	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1575	data).
		1576
		1577	Raises C<EBADMSG> error if the data could not be decoded.
		1578
		1579	=cut
		1580
		1581	register_read_type storable => sub {
		1582	my ($self, $cb) = @_;
		1583
		1584	require Storable;
		1585
		1586	sub {
		1587	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1588	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
		1589	or return;
		1590
		1591	my $format = length pack "w", $len;
		1592
		1593	# bypass unshift if we already have the remaining chunk
		1594	if ($format + $len <= length $_[0]{rbuf}) {
		1595	my $data = substr $_[0]{rbuf}, $format, $len;
		1596	substr $_[0]{rbuf}, 0, $format + $len, "";
		1597	$cb->($_[0], Storable::thaw ($data));
		1598	} else {
		1599	# remove prefix
		1600	substr $_[0]{rbuf}, 0, $format, "";
		1601
		1602	# read remaining chunk
		1603	$_[0]->unshift_read (chunk => $len, sub {
		1604	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1605	$cb->($_[0], $ref);
		1606	} else {
		1607	$self->_error (Errno::EBADMSG);
		1608	}
		1609	});
		1610	}
		1611
		1612	1
891	}	1613	}
892	};	1614	};
893		1615
894	=back	1616	=back
895		1617
…		…
916	=item $handle->stop_read	1638	=item $handle->stop_read
917		1639
918	=item $handle->start_read	1640	=item $handle->start_read
919		1641
920	In rare cases you actually do not want to read anything from the	1642	In rare cases you actually do not want to read anything from the
921	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1643	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
922	any queued callbacks will be executed then. To start reading again, call	1644	any queued callbacks will be executed then. To start reading again, call
923	C<start_read>.	1645	C<start_read>.
924		1646
		1647	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1648	you change the C<on_read> callback or push/unshift a read callback, and it
		1649	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1650	there are any read requests in the queue.
		1651
		1652	These methods will have no effect when in TLS mode (as TLS doesn't support
		1653	half-duplex connections).
		1654
925	=cut	1655	=cut
926		1656
927	sub stop_read {	1657	sub stop_read {
928	my ($self) = @_;	1658	my ($self) = @_;
929		1659
930	delete $self->{_rw};	1660	delete $self->{_rw} unless $self->{tls};
931	}	1661	}
932		1662
933	sub start_read {	1663	sub start_read {
934	my ($self) = @_;	1664	my ($self) = @_;
935		1665
936	unless ($self->{_rw} || $self->{_eof}) {	1666	unless ($self->{_rw} || $self->{_eof}) {
937	Scalar::Util::weaken $self;	1667	Scalar::Util::weaken $self;
938		1668
939	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1669	$self->{_rw} = AE::io $self->{fh}, 0, sub {
940	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1670	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
941	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1671	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
942		1672
943	if ($len > 0) {	1673	if ($len > 0) {
944	$self->{filter_r}	1674	$self->{_activity} = $self->{_ractivity} = AE::now;
945	? $self->{filter_r}->($self, $rbuf)	1675
		1676	if ($self->{tls}) {
		1677	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
		1678
		1679	&_dotls ($self);
		1680	} else {
946	: $self->_drain_rbuf;	1681	$self->_drain_rbuf;
		1682	}
947		1683
948	} elsif (defined $len) {	1684	} elsif (defined $len) {
949	delete $self->{_rw};	1685	delete $self->{_rw};
950	$self->{_eof} = 1;	1686	$self->{_eof} = 1;
951	$self->_drain_rbuf;	1687	$self->_drain_rbuf;
952		1688
953	} elsif ($! != EAGAIN && $! != EINTR && $! != &AnyEvent::Util::WSAWOULDBLOCK) {	1689	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
954	return $self->error;	1690	return $self->_error ($!, 1);
955	}	1691	}
956	});	1692	};
957	}	1693	}
958	}	1694	}
959		1695
		1696	our $ERROR_SYSCALL;
		1697	our $ERROR_WANT_READ;
		1698
		1699	sub _tls_error {
		1700	my ($self, $err) = @_;
		1701
		1702	return $self->_error ($!, 1)
		1703	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1704
		1705	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1706
		1707	# reduce error string to look less scary
		1708	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1709
		1710	if ($self->{_on_starttls}) {
		1711	(delete $self->{_on_starttls})->($self, undef, $err);
		1712	&_freetls;
		1713	} else {
		1714	&_freetls;
		1715	$self->_error (Errno::EPROTO, 1, $err);
		1716	}
		1717	}
		1718
		1719	# poll the write BIO and send the data if applicable
		1720	# also decode read data if possible
		1721	# this is basiclaly our TLS state machine
		1722	# more efficient implementations are possible with openssl,
		1723	# but not with the buggy and incomplete Net::SSLeay.
960	sub _dotls {	1724	sub _dotls {
961	my ($self) = @_;	1725	my ($self) = @_;
962		1726
		1727	my $tmp;
		1728
963	if (length $self->{_tls_wbuf}) {	1729	if (length $self->{_tls_wbuf}) {
964	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1730	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
965	substr $self->{_tls_wbuf}, 0, $len, "";	1731	substr $self->{_tls_wbuf}, 0, $tmp, "";
966	}	1732	}
967	}
968		1733
		1734	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1735	return $self->_tls_error ($tmp)
		1736	if $tmp != $ERROR_WANT_READ
		1737	&& ($tmp != $ERROR_SYSCALL || $!);
		1738	}
		1739
		1740	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1741	unless (length $tmp) {
		1742	$self->{_on_starttls}
		1743	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1744	&_freetls;
		1745
		1746	if ($self->{on_stoptls}) {
		1747	$self->{on_stoptls}($self);
		1748	return;
		1749	} else {
		1750	# let's treat SSL-eof as we treat normal EOF
		1751	delete $self->{_rw};
		1752	$self->{_eof} = 1;
		1753	}
		1754	}
		1755
		1756	$self->{_tls_rbuf} .= $tmp;
		1757	$self->_drain_rbuf;
		1758	$self->{tls} or return; # tls session might have gone away in callback
		1759	}
		1760
		1761	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1762	return $self->_tls_error ($tmp)
		1763	if $tmp != $ERROR_WANT_READ
		1764	&& ($tmp != $ERROR_SYSCALL || $!);
		1765
969	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1766	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
970	$self->{wbuf} .= $buf;	1767	$self->{wbuf} .= $tmp;
971	$self->_drain_wbuf;	1768	$self->_drain_wbuf;
972	}	1769	}
973		1770
974	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {	1771	$self->{_on_starttls}
975	$self->{rbuf} .= $buf;	1772	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
976	$self->_drain_rbuf;	1773	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
977	}
978
979	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
980
981	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
982	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
983	$self->error;
984	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
985	$! = &Errno::EIO;
986	$self->error;
987	}
988
989	# all others are fine for our purposes
990	}
991	}	1774	}
992		1775
993	=item $handle->starttls ($tls[, $tls_ctx])	1776	=item $handle->starttls ($tls[, $tls_ctx])
994		1777
995	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1778	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
996	object is created, you can also do that at a later time by calling	1779	object is created, you can also do that at a later time by calling
997	C<starttls>.	1780	C<starttls>.
998		1781
		1782	Starting TLS is currently an asynchronous operation - when you push some
		1783	write data and then call C<< ->starttls >> then TLS negotiation will start
		1784	immediately, after which the queued write data is then sent.
		1785
999	The first argument is the same as the C<tls> constructor argument (either	1786	The first argument is the same as the C<tls> constructor argument (either
1000	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1787	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1001		1788
1002	The second argument is the optional C<Net::SSLeay::CTX> object that is	1789	The second argument is the optional C<AnyEvent::TLS> object that is used
1003	used when AnyEvent::Handle has to create its own TLS connection object.	1790	when AnyEvent::Handle has to create its own TLS connection object, or
		1791	a hash reference with C<< key => value >> pairs that will be used to
		1792	construct a new context.
1004		1793
1005	The TLS connection object will end up in C<< $handle->{tls} >> after this	1794	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1006	call and can be used or changed to your liking. Note that the handshake	1795	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1007	might have already started when this function returns.	1796	changed to your liking. Note that the handshake might have already started
		1797	when this function returns.
1008		1798
1009	=cut	1799	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1800	handshakes on the same stream. Best do not attempt to use the stream after
		1801	stopping TLS.
1010		1802
1011	# TODO: maybe document...	1803	=cut
		1804
		1805	our %TLS_CACHE; #TODO not yet documented, should we?
		1806
1012	sub starttls {	1807	sub starttls {
1013	my ($self, $ssl, $ctx) = @_;	1808	my ($self, $tls, $ctx) = @_;
1014		1809
1015	$self->stoptls;	1810	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1811	if $self->{tls};
1016		1812
1017	if ($ssl eq "accept") {	1813	$self->{tls} = $tls;
1018	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1814	$self->{tls_ctx} = $ctx if @_ > 2;
1019	Net::SSLeay::set_accept_state ($ssl);	1815
1020	} elsif ($ssl eq "connect") {	1816	return unless $self->{fh};
1021	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1817
1022	Net::SSLeay::set_connect_state ($ssl);	1818	require Net::SSLeay;
		1819
		1820	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1821	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1822
		1823	$tls = delete $self->{tls};
		1824	$ctx = $self->{tls_ctx};
		1825
		1826	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1827
		1828	if ("HASH" eq ref $ctx) {
		1829	require AnyEvent::TLS;
		1830
		1831	if ($ctx->{cache}) {
		1832	my $key = $ctx+0;
		1833	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1834	} else {
		1835	$ctx = new AnyEvent::TLS %$ctx;
		1836	}
		1837	}
1023	}	1838
1024		1839	$self->{tls_ctx} = $ctx || TLS_CTX ();
1025	$self->{tls} = $ssl;	1840	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1026		1841
1027	# basically, this is deep magic (because SSL_read should have the same issues)	1842	# basically, this is deep magic (because SSL_read should have the same issues)
1028	# but the openssl maintainers basically said: "trust us, it just works".	1843	# but the openssl maintainers basically said: "trust us, it just works".
1029	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1844	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1030	# and mismaintained ssleay-module doesn't even offer them).	1845	# and mismaintained ssleay-module doesn't even offer them).
1031	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1846	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1847	#
		1848	# in short: this is a mess.
		1849	#
		1850	# note that we do not try to keep the length constant between writes as we are required to do.
		1851	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1852	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1853	# have identity issues in that area.
1032	Net::SSLeay::CTX_set_mode ($self->{tls},	1854	# Net::SSLeay::CTX_set_mode ($ssl,
1033	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1855	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1034	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1856	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1857	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1035		1858
1036	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1859	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1037	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1860	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1038		1861
		1862	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1863
1039	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1864	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1040		1865
1041	$self->{filter_w} = sub {	1866	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1042	$_[0]{_tls_wbuf} .= ${$_[1]};	1867	if $self->{on_starttls};
1043	&_dotls;	1868
1044	};	1869	&_dotls; # need to trigger the initial handshake
1045	$self->{filter_r} = sub {	1870	$self->start_read; # make sure we actually do read
1046	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1047	&_dotls;
1048	};
1049	}	1871	}
1050		1872
1051	=item $handle->stoptls	1873	=item $handle->stoptls
1052		1874
1053	Destroys the SSL connection, if any. Partial read or write data will be	1875	Shuts down the SSL connection - this makes a proper EOF handshake by
1054	lost.	1876	sending a close notify to the other side, but since OpenSSL doesn't
		1877	support non-blocking shut downs, it is not guarenteed that you can re-use
		1878	the stream afterwards.
1055		1879
1056	=cut	1880	=cut
1057		1881
1058	sub stoptls {	1882	sub stoptls {
1059	my ($self) = @_;	1883	my ($self) = @_;
1060		1884
1061	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1885	if ($self->{tls}) {
		1886	Net::SSLeay::shutdown ($self->{tls});
1062		1887
1063	delete $self->{_rbio};	1888	&_dotls;
1064	delete $self->{_wbio};	1889
1065	delete $self->{_tls_wbuf};	1890	# # we don't give a shit. no, we do, but we can't. no...#d#
1066	delete $self->{filter_r};	1891	# # we, we... have to use openssl :/#d#
1067	delete $self->{filter_w};	1892	# &_freetls;#d#
		1893	}
		1894	}
		1895
		1896	sub _freetls {
		1897	my ($self) = @_;
		1898
		1899	return unless $self->{tls};
		1900
		1901	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1902	if $self->{tls} > 0;
		1903
		1904	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1068	}	1905	}
1069		1906
1070	sub DESTROY {	1907	sub DESTROY {
1071	my $self = shift;	1908	my ($self) = @_;
1072		1909
1073	$self->stoptls;	1910	&_freetls;
		1911
		1912	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1913
		1914	if ($linger && length $self->{wbuf} && $self->{fh}) {
		1915	my $fh = delete $self->{fh};
		1916	my $wbuf = delete $self->{wbuf};
		1917
		1918	my @linger;
		1919
		1920	push @linger, AE::io $fh, 1, sub {
		1921	my $len = syswrite $fh, $wbuf, length $wbuf;
		1922
		1923	if ($len > 0) {
		1924	substr $wbuf, 0, $len, "";
		1925	} else {
		1926	@linger = (); # end
		1927	}
		1928	};
		1929	push @linger, AE::timer $linger, 0, sub {
		1930	@linger = ();
		1931	};
		1932	}
		1933	}
		1934
		1935	=item $handle->destroy
		1936
		1937	Shuts down the handle object as much as possible - this call ensures that
		1938	no further callbacks will be invoked and as many resources as possible
		1939	will be freed. Any method you will call on the handle object after
		1940	destroying it in this way will be silently ignored (and it will return the
		1941	empty list).
		1942
		1943	Normally, you can just "forget" any references to an AnyEvent::Handle
		1944	object and it will simply shut down. This works in fatal error and EOF
		1945	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1946	callback, so when you want to destroy the AnyEvent::Handle object from
		1947	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1948	that case.
		1949
		1950	Destroying the handle object in this way has the advantage that callbacks
		1951	will be removed as well, so if those are the only reference holders (as
		1952	is common), then one doesn't need to do anything special to break any
		1953	reference cycles.
		1954
		1955	The handle might still linger in the background and write out remaining
		1956	data, as specified by the C<linger> option, however.
		1957
		1958	=cut
		1959
		1960	sub destroy {
		1961	my ($self) = @_;
		1962
		1963	$self->DESTROY;
		1964	%$self = ();
		1965	bless $self, "AnyEvent::Handle::destroyed";
		1966	}
		1967
		1968	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		1969	#nop
1074	}	1970	}
1075		1971
1076	=item AnyEvent::Handle::TLS_CTX	1972	=item AnyEvent::Handle::TLS_CTX
1077		1973
1078	This function creates and returns the Net::SSLeay::CTX object used by	1974	This function creates and returns the AnyEvent::TLS object used by default
1079	default for TLS mode.	1975	for TLS mode.
1080		1976
1081	The context is created like this:	1977	The context is created by calling L<AnyEvent::TLS> without any arguments.
1082
1083	Net::SSLeay::load_error_strings;
1084	Net::SSLeay::SSLeay_add_ssl_algorithms;
1085	Net::SSLeay::randomize;
1086
1087	my $CTX = Net::SSLeay::CTX_new;
1088
1089	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1090		1978
1091	=cut	1979	=cut
1092		1980
1093	our $TLS_CTX;	1981	our $TLS_CTX;
1094		1982
1095	sub TLS_CTX() {	1983	sub TLS_CTX() {
1096	$TLS_CTX || do {	1984	$TLS_CTX ||= do {
1097	require Net::SSLeay;	1985	require AnyEvent::TLS;
1098		1986
1099	Net::SSLeay::load_error_strings ();	1987	new AnyEvent::TLS
1100	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1101	Net::SSLeay::randomize ();
1102
1103	$TLS_CTX = Net::SSLeay::CTX_new ();
1104
1105	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1106
1107	$TLS_CTX
1108	}	1988	}
1109	}	1989	}
1110		1990
1111	=back	1991	=back
		1992
		1993
		1994	=head1 NONFREQUENTLY ASKED QUESTIONS
		1995
		1996	=over 4
		1997
		1998	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1999	still get further invocations!
		2000
		2001	That's because AnyEvent::Handle keeps a reference to itself when handling
		2002	read or write callbacks.
		2003
		2004	It is only safe to "forget" the reference inside EOF or error callbacks,
		2005	from within all other callbacks, you need to explicitly call the C<<
		2006	->destroy >> method.
		2007
		2008	=item I get different callback invocations in TLS mode/Why can't I pause
		2009	reading?
		2010
		2011	Unlike, say, TCP, TLS connections do not consist of two independent
		2012	communication channels, one for each direction. Or put differently. The
		2013	read and write directions are not independent of each other: you cannot
		2014	write data unless you are also prepared to read, and vice versa.
		2015
		2016	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		2017	callback invocations when you are not expecting any read data - the reason
		2018	is that AnyEvent::Handle always reads in TLS mode.
		2019
		2020	During the connection, you have to make sure that you always have a
		2021	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2022	connection (or when you no longer want to use it) you can call the
		2023	C<destroy> method.
		2024
		2025	=item How do I read data until the other side closes the connection?
		2026
		2027	If you just want to read your data into a perl scalar, the easiest way
		2028	to achieve this is by setting an C<on_read> callback that does nothing,
		2029	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2030	will be in C<$_[0]{rbuf}>:
		2031
		2032	$handle->on_read (sub { });
		2033	$handle->on_eof (undef);
		2034	$handle->on_error (sub {
		2035	my $data = delete $_[0]{rbuf};
		2036	});
		2037
		2038	The reason to use C<on_error> is that TCP connections, due to latencies
		2039	and packets loss, might get closed quite violently with an error, when in
		2040	fact, all data has been received.
		2041
		2042	It is usually better to use acknowledgements when transferring data,
		2043	to make sure the other side hasn't just died and you got the data
		2044	intact. This is also one reason why so many internet protocols have an
		2045	explicit QUIT command.
		2046
		2047	=item I don't want to destroy the handle too early - how do I wait until
		2048	all data has been written?
		2049
		2050	After writing your last bits of data, set the C<on_drain> callback
		2051	and destroy the handle in there - with the default setting of
		2052	C<low_water_mark> this will be called precisely when all data has been
		2053	written to the socket:
		2054
		2055	$handle->push_write (...);
		2056	$handle->on_drain (sub {
		2057	warn "all data submitted to the kernel\n";
		2058	undef $handle;
		2059	});
		2060
		2061	If you just want to queue some data and then signal EOF to the other side,
		2062	consider using C<< ->push_shutdown >> instead.
		2063
		2064	=item I want to contact a TLS/SSL server, I don't care about security.
		2065
		2066	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2067	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		2068	parameter:
		2069
		2070	tcp_connect $host, $port, sub {
		2071	my ($fh) = @_;
		2072
		2073	my $handle = new AnyEvent::Handle
		2074	fh => $fh,
		2075	tls => "connect",
		2076	on_error => sub { ... };
		2077
		2078	$handle->push_write (...);
		2079	};
		2080
		2081	=item I want to contact a TLS/SSL server, I do care about security.
		2082
		2083	Then you should additionally enable certificate verification, including
		2084	peername verification, if the protocol you use supports it (see
		2085	L<AnyEvent::TLS>, C<verify_peername>).
		2086
		2087	E.g. for HTTPS:
		2088
		2089	tcp_connect $host, $port, sub {
		2090	my ($fh) = @_;
		2091
		2092	my $handle = new AnyEvent::Handle
		2093	fh => $fh,
		2094	peername => $host,
		2095	tls => "connect",
		2096	tls_ctx => { verify => 1, verify_peername => "https" },
		2097	...
		2098
		2099	Note that you must specify the hostname you connected to (or whatever
		2100	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2101	peername verification will be done.
		2102
		2103	The above will use the system-dependent default set of trusted CA
		2104	certificates. If you want to check against a specific CA, add the
		2105	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2106
		2107	tls_ctx => {
		2108	verify => 1,
		2109	verify_peername => "https",
		2110	ca_file => "my-ca-cert.pem",
		2111	},
		2112
		2113	=item I want to create a TLS/SSL server, how do I do that?
		2114
		2115	Well, you first need to get a server certificate and key. You have
		2116	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2117	self-signed certificate (cheap. check the search engine of your choice,
		2118	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2119	nice program for that purpose).
		2120
		2121	Then create a file with your private key (in PEM format, see
		2122	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2123	file should then look like this:
		2124
		2125	-----BEGIN RSA PRIVATE KEY-----
		2126	...header data
		2127	... lots of base64'y-stuff
		2128	-----END RSA PRIVATE KEY-----
		2129
		2130	-----BEGIN CERTIFICATE-----
		2131	... lots of base64'y-stuff
		2132	-----END CERTIFICATE-----
		2133
		2134	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2135	specify this file as C<cert_file>:
		2136
		2137	tcp_server undef, $port, sub {
		2138	my ($fh) = @_;
		2139
		2140	my $handle = new AnyEvent::Handle
		2141	fh => $fh,
		2142	tls => "accept",
		2143	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2144	...
		2145
		2146	When you have intermediate CA certificates that your clients might not
		2147	know about, just append them to the C<cert_file>.
		2148
		2149	=back
		2150
1112		2151
1113	=head1 SUBCLASSING AnyEvent::Handle	2152	=head1 SUBCLASSING AnyEvent::Handle
1114		2153
1115	In many cases, you might want to subclass AnyEvent::Handle.	2154	In many cases, you might want to subclass AnyEvent::Handle.
1116		2155
…		…
1120	=over 4	2159	=over 4
1121		2160
1122	=item * all constructor arguments become object members.	2161	=item * all constructor arguments become object members.
1123		2162
1124	At least initially, when you pass a C<tls>-argument to the constructor it	2163	At least initially, when you pass a C<tls>-argument to the constructor it
1125	will end up in C<< $handle->{tls} >>. Those members might be changes or	2164	will end up in C<< $handle->{tls} >>. Those members might be changed or
1126	mutated later on (for example C<tls> will hold the TLS connection object).	2165	mutated later on (for example C<tls> will hold the TLS connection object).
1127		2166
1128	=item * other object member names are prefixed with an C<_>.	2167	=item * other object member names are prefixed with an C<_>.
1129		2168
1130	All object members not explicitly documented (internal use) are prefixed	2169	All object members not explicitly documented (internal use) are prefixed

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines