[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.185 by root, Thu Sep 3 19:48:27 2009 UTC vs.
Revision 1.202 by root, Sat Oct 16 02:01:54 2010 UTC

 =head1 NAME
-AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
+AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
 =head1 SYNOPSIS
    use AnyEvent;
    use AnyEvent::Handle;
       on_error => sub {
          my ($hdl, $fatal, $msg) = @_;
          warn "got error $msg\n";
          $hdl->destroy;
          $cv->send;
-      );
+      };
    # send some request line
    $hdl->push_write ("getinfo\015\012");
    # read the response line
    $cv->recv;
 =head1 DESCRIPTION
-This module is a helper module to make it easier to do event-based I/O on
+This is a helper module to make it easier to do event-based I/O on
-filehandles.
+stream-based filehandles (sockets, pipes, and other stream things).
 The L<AnyEvent::Intro> tutorial contains some well-documented
 AnyEvent::Handle examples.
-In the following, when the documentation refers to of "bytes" then this
+In the following, where the documentation refers to "bytes", it means
-means characters. As sysread and syswrite are used for all I/O, their
+characters. As sysread and syswrite are used for all I/O, their
 treatment of characters applies to this module as well.
 At the very minimum, you should specify C<fh> or C<connect>, and the
 C<on_error> callback.
 =head1 METHODS
 =over 4
-=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
+=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
 The constructor supports these arguments (all as C<< key => value >> pairs).
 =over 4
 prepare the file handle with parameters required for the actual connect
 (as opposed to settings that can be changed when the connection is already
 established).
 The return value of this callback should be the connect timeout value in
-seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
+seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
-timeout is to be used).
+default timeout is to be used).
 =item on_connect => $cb->($handle, $host, $port, $retry->())
 This callback is called when a connection has been successfully established.
-The actual numeric host and port (the socket peername) are passed as
+The peer's numeric host and port (the socket peername) are passed as
 parameters, together with a retry callback.
-When, for some reason, the handle is not acceptable, then calling
+If, for some reason, the handle is not acceptable, calling C<$retry>
-C<$retry> will continue with the next conenction target (in case of
+will continue with the next connection target (in case of multi-homed
-multi-homed hosts or SRV records there can be multiple connection
+hosts or SRV records there can be multiple connection endpoints). At the
-endpoints). When it is called then the read and write queues, eof status,
+time it is called the read and write queues, eof status, tls status and
-tls status and similar properties of the handle are being reset.
+similar properties of the handle will have been reset.
-In most cases, ignoring the C<$retry> parameter is the way to go.
+In most cases, you should ignore the C<$retry> parameter.
 =item on_connect_error => $cb->($handle, $message)
-This callback is called when the conenction could not be
+This callback is called when the connection could not be
 established. C<$!> will contain the relevant error code, and C<$message> a
 message describing it (usually the same as C<"$!">).
 If this callback isn't specified, then C<on_error> will be called with a
 fatal error instead.
 =item on_error => $cb->($handle, $fatal, $message)
 This is the error callback, which is called when, well, some error
 occured, such as not being able to resolve the hostname, failure to
-connect or a read error.
+connect, or a read error.
 Some errors are fatal (which is indicated by C<$fatal> being true). On
 fatal errors the handle object will be destroyed (by a call to C<< ->
 destroy >>) after invoking the error callback (which means you are free to
 examine the handle object). Examples of fatal errors are an EOF condition
 with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
-cases where the other side can close the connection at their will it is
+cases where the other side can close the connection at will, it is
 often easiest to not report C<EPIPE> errors in this callback.
 AnyEvent::Handle tries to find an appropriate error code for you to check
 against, but in some cases (TLS errors), this does not work well. It is
 recommended to always output the C<$message> argument in human-readable
 error messages (it's usually the same as C<"$!">).
-Non-fatal errors can be retried by simply returning, but it is recommended
+Non-fatal errors can be retried by returning, but it is recommended
 to simply ignore this parameter and instead abondon the handle object
 when this callback is invoked. Examples of non-fatal errors are timeouts
 C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
-On callback entrance, the value of C<$!> contains the operating system
+On entry to the callback, the value of C<$!> contains the operating
-error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
+system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
 C<EPROTO>).
 While not mandatory, it is I<highly> recommended to set this callback, as
-you will not be notified of errors otherwise. The default simply calls
+you will not be notified of errors otherwise. The default just calls
 C<croak>.
 =item on_read => $cb->($handle)
 This sets the default read callback, which is called when data arrives
 To access (and remove data from) the read buffer, use the C<< ->rbuf >>
 method or access the C<< $handle->{rbuf} >> member directly. Note that you
 must not enlarge or modify the read buffer, you can only remove data at
 the beginning from it.
+You can also call C<< ->push_read (...) >> or any other function that
+modifies the read queue. Or do both. Or ...
-When an EOF condition is detected then AnyEvent::Handle will first try to
+When an EOF condition is detected, AnyEvent::Handle will first try to
 feed all the remaining data to the queued callbacks and C<on_read> before
 calling the C<on_eof> callback. If no progress can be made, then a fatal
 error will be raised (with C<$!> set to C<EPIPE>).
 Note that, unlike requests in the read queue, an C<on_read> callback
 set, then a fatal error will be raised with C<$!> set to <0>.
 =item on_drain => $cb->($handle)
 This sets the callback that is called when the write buffer becomes empty
-(or when the callback is set and the buffer is empty already).
+(or immediately if the buffer is empty already).
 To append to the write buffer, use the C<< ->push_write >> method.
 This callback is useful when you don't want to put all of your write data
 into the queue at once, for example, when you want to write the contents
 many seconds pass without a successful read or write on the underlying
 file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
 will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
 error will be raised).
-There are three variants of the timeouts that work fully independent
+There are three variants of the timeouts that work independently
 of each other, for both read and write, just read, and just write:
 C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
 C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
 C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
-Note that timeout processing is also active when you currently do not have
+Note that timeout processing is active even when you do not have
 any outstanding read or write requests: If you plan to keep the connection
-idle then you should disable the timout temporarily or ignore the timeout
+idle then you should disable the timeout temporarily or ignore the timeout
 in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
 restart the timeout.
 Zero (the default) disables this timeout.
 amount of data without a callback ever being called as long as the line
 isn't finished).
 =item autocork => <boolean>
-When disabled (the default), then C<push_write> will try to immediately
+When disabled (the default), C<push_write> will try to immediately
-write the data to the handle, if possible. This avoids having to register
+write the data to the handle if possible. This avoids having to register
 a write watcher and wait for the next event loop iteration, but can
 be inefficient if you write multiple small chunks (on the wire, this
 disadvantage is usually avoided by your kernel's nagle algorithm, see
 C<no_delay>, but this option can save costly syscalls).
-When enabled, then writes will always be queued till the next event loop
+When enabled, writes will always be queued till the next event loop
 iteration. This is efficient when you do many small writes per iteration,
 but less efficient when you do a single write only per iteration (or when
 the write buffer often is full). It also increases write latency.
 =item no_delay => <boolean>
 the Nagle algorithm, and usually it is beneficial.
 In some situations you want as low a delay as possible, which can be
 accomplishd by setting this option to a true value.
-The default is your opertaing system's default behaviour (most likely
+The default is your operating system's default behaviour (most likely
-enabled), this option explicitly enables or disables it, if possible.
+enabled). This option explicitly enables or disables it, if possible.
 =item keepalive => <boolean>
 Enables (default disable) the SO_KEEPALIVE option on the stream socket:
 normally, TCP connections have no time-out once established, so TCP
-conenctions, once established, can stay alive forever even when the other
+connections, once established, can stay alive forever even when the other
 side has long gone. TCP keepalives are a cheap way to take down long-lived
-TCP connections whent he other side becomes unreachable. While the default
+TCP connections when the other side becomes unreachable. While the default
 is OS-dependent, TCP keepalives usually kick in after around two hours,
 and, if the other side doesn't reply, take down the TCP connection some 10
 to 15 minutes later.
 It is harmless to specify this option for file handles that do not support
 already have occured on BSD systems), but at least it will protect you
 from most attacks.
 =item read_size => <bytes>
-The default read block size (the amount of bytes this module will
+The default read block size (the number of bytes this module will
 try to read during each loop iteration, which affects memory
 requirements). Default: C<8192>.
 =item low_water_mark => <bytes>
-Sets the amount of bytes (default: C<0>) that make up an "empty" write
+Sets the number of bytes (default: C<0>) that make up an "empty" write
-buffer: If the write reaches this size or gets even samller it is
+buffer: If the buffer reaches this size or gets even samller it is
 considered empty.
 Sometimes it can be beneficial (for performance reasons) to add data to
 the write buffer before it is fully drained, but this is a rare case, as
 the operating system kernel usually buffers data as well, so the default
 is good in almost all cases.
 =item linger => <seconds>
-If non-zero (default: C<3600>), then the destructor of the
+If this is non-zero (default: C<3600>), the destructor of the
 AnyEvent::Handle object will check whether there is still outstanding
 write data and will install a watcher that will write this data to the
 socket. No errors will be reported (this mostly matches how the operating
 system treats outstanding data at socket close time).
 A string used to identify the remote site - usually the DNS hostname
 (I<not> IDN!) used to create the connection, rarely the IP address.
 Apart from being useful in error messages, this string is also used in TLS
 peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
-verification will be skipped when C<peername> is not specified or
+verification will be skipped when C<peername> is not specified or is
 C<undef>.
 =item tls => "accept" | "connect" | Net::SSLeay::SSL object
 When this parameter is given, it enables TLS (SSL) mode, that means
-AnyEvent will start a TLS handshake as soon as the conenction has been
+AnyEvent will start a TLS handshake as soon as the connection has been
 established and will transparently encrypt/decrypt data afterwards.
 All TLS protocol errors will be signalled as C<EPROTO>, with an
 appropriate error message.
 B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
 passing in the wrong integer will lead to certain crash. This most often
 happens when one uses a stylish C<< tls => 1 >> and is surprised about the
 segmentation fault.
-See the C<< ->starttls >> method for when need to start TLS negotiation later.
+Use the C<< ->starttls >> method if you need to start TLS negotiation later.
 =item tls_ctx => $anyevent_tls
 Use the given C<AnyEvent::TLS> object to create the new TLS connection
 (unless a connection object was specified directly). If this parameter is
 TLS handshake failures will not cause C<on_error> to be invoked when this
 callback is in effect, instead, the error message will be passed to C<on_starttls>.
 Without this callback, handshake failures lead to C<on_error> being
-called, as normal.
+called as usual.
-Note that you cannot call C<starttls> right again in this callback. If you
+Note that you cannot just call C<starttls> again in this callback. If you
 need to do that, start an zero-second timer instead whose callback can
 then call C<< ->starttls >> again.
 =item on_stoptls => $cb->($handle)
 }
 sub _start {
    my ($self) = @_;
+   # too many clueless people try to use udp and similar sockets
+   # with AnyEvent::Handle, do them a favour.
+   my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
+   Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
+      if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
    AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
    $self->{_activity}  =
    $self->{_ractivity} =
    $self->{_wactivity} = AE::now;
    $self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
    $self->starttls  (delete $self->{tls}, delete $self->{tls_ctx})
       if $self->{tls};
-   $self->on_drain  (delete $self->{on_drain}) if $self->{on_drain};
+   $self->on_drain  (delete $self->{on_drain} ) if $self->{on_drain};
    $self->start_read
       if $self->{on_read} || @{ $self->{_queue} };
    $self->_drain_wbuf;
    $message ||= "$!";
    if ($self->{on_error}) {
       $self->{on_error}($self, $fatal, $message);
       $self->destroy if $fatal;
-   } elsif ($self->{fh}) {
+   } elsif ($self->{fh} || $self->{connect}) {
       $self->destroy;
       Carp::croak "AnyEvent::Handle uncaught error: $message";
    }
 }
 =cut
 sub no_delay {
    $_[0]{no_delay} = $_[1];
-   eval {
-      local $SIG{__DIE__};
-      setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
+   setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
-         if $_[0]{fh};
+      if $_[0]{fh};
-   };
 }
 =item $handle->keepalive ($boolean)
 Enables or disables the C<keepalive> setting (see constructor argument of
 Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
 =cut
-sub on_starttls {
+sub on_stoptls {
    $_[0]{on_stoptls} = $_[1];
 }
 =item $handle->rbuf_max ($max_octets)
       $_[0]{$on_timeout} = $_[1];
    };
    *$timeout = sub {
       my ($self, $new_value) = @_;
+      $new_value >= 0
+         or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
       $self->{$timeout} = $new_value;
       delete $self->{$tw}; &$cb;
    };
 =item $handle->on_drain ($cb)
 Sets the C<on_drain> callback or clears it (see the description of
 C<on_drain> in the constructor).
+This method may invoke callbacks (and therefore the handle might be
+destroyed after it returns).
 =cut
 sub on_drain {
    my ($self, $cb) = @_;
 =item $handle->push_write ($data)
 Queues the given scalar to be written. You can push as much data as you
 want (only limited by the available memory), as C<AnyEvent::Handle>
 buffers it independently of the kernel.
+This method may invoke callbacks (and therefore the handle might be
+destroyed after it returns).
 =cut
 sub _drain_wbuf {
    my ($self) = @_;
       @_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
             or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
            ->($self, @_);
    }
+   # we downgrade here to avoid hard-to-track-down bugs,
+   # and diagnose the problem earlier and better.
    if ($self->{tls}) {
-      $self->{_tls_wbuf} .= $_[0];
+      utf8::downgrade $self->{_tls_wbuf} .= $_[0];
       &_dotls ($self)    if $self->{fh};
    } else {
-      $self->{wbuf}      .= $_[0];
+      utf8::downgrade $self->{wbuf}      .= $_[0];
       $self->_drain_wbuf if $self->{fh};
    }
 }
 =item $handle->push_write (type => @args)
 Instead of formatting your data yourself, you can also let this module
 do the job by specifying a type and type-specific arguments. You
 can also specify the (fully qualified) name of a package, in which
 case AnyEvent tries to load the package and then expects to find the
-C<anyevent_read_type> function inside (see "custom write types", below).
+C<anyevent_write_type> function inside (see "custom write types", below).
 Predefined types are (if you have ideas for additional types, feel free to
 drop by and tell us):
 =over 4
 the peer.
 You can rely on the normal read queue and C<on_eof> handling
 afterwards. This is the cleanest way to close a connection.
+This method may invoke callbacks (and therefore the handle might be
+destroyed after it returns).
 =cut
 sub push_shutdown {
    my ($self) = @_;
 ways, the "simple" way, using only C<on_read> and the "complex" way, using
 a queue.
 In the simple case, you just install an C<on_read> callback and whenever
 new data arrives, it will be called. You can then remove some data (if
-enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
+enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
 leave the data there if you want to accumulate more (e.g. when only a
-partial message has been received so far).
+partial message has been received so far), or change the read queue with
+e.g. C<push_read>.
 In the more complex case, you want to queue multiple callbacks. In this
 case, AnyEvent::Handle will call the first queued callback each time new
-data arrives (also the first time it is queued) and removes it when it has
+data arrives (also the first time it is queued) and remove it when it has
 done its job (see C<push_read>, below).
 This way you can, for example, push three line-reads, followed by reading
 a chunk of data, and AnyEvent::Handle will execute them in order.
 This replaces the currently set C<on_read> callback, or clears it (when
 the new callback is C<undef>). See the description of C<on_read> in the
 constructor.
+This method may invoke callbacks (and therefore the handle might be
+destroyed after it returns).
 =cut
 sub on_read {
    my ($self, $cb) = @_;
    $self->_drain_rbuf if $cb;
 }
 =item $handle->rbuf
-Returns the read buffer (as a modifiable lvalue).
+Returns the read buffer (as a modifiable lvalue). You can also access the
+read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
+much faster, and no less clean).
-You can access the read buffer directly as the C<< ->{rbuf} >>
+The only operation allowed on the read buffer (apart from looking at it)
-member, if you want. However, the only operation allowed on the
+is removing data from its beginning. Otherwise modifying or appending to
-read buffer (apart from looking at it) is removing data from its
+it is not allowed and will lead to hard-to-track-down bugs.
-beginning. Otherwise modifying or appending to it is not allowed and will
-lead to hard-to-track-down bugs.
-NOTE: The read buffer should only be used or modified if the C<on_read>,
+NOTE: The read buffer should only be used or modified in the C<on_read>
-C<push_read> or C<unshift_read> methods are used. The other read methods
+callback or when C<push_read> or C<unshift_read> are used with a single
-automatically manage the read buffer.
+callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
+will manage the read buffer on their own.
 =cut
 sub rbuf : lvalue {
    $_[0]{rbuf}
 If enough data was available, then the callback must remove all data it is
 interested in (which can be none at all) and return a true value. After returning
 true, it will be removed from the queue.
+These methods may invoke callbacks (and therefore the handle might be
+destroyed after it returns).
 =cut
 our %RH;
 sub register_read_type($$) {
    my $cb = pop;
    if (@_) {
       my $type = shift;
+      $cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
-      $cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
+             or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
             ->($self, $cb, @_);
    }
    unshift @{ $self->{_queue} }, $cb;
    $self->_drain_rbuf;
 the receive buffer when neither C<$accept> nor C<$reject> match,
 and everything preceding and including the match will be accepted
 unconditionally. This is useful to skip large amounts of data that you
 know cannot be matched, so that the C<$accept> or C<$reject> regex do not
 have to start matching from the beginning. This is purely an optimisation
-and is usually worth only when you expect more than a few kilobytes.
+and is usually worth it only when you expect more than a few kilobytes.
 Example: expect a http header, which ends at C<\015\012\015\012>. Since we
-expect the header to be very large (it isn't in practise, but...), we use
+expect the header to be very large (it isn't in practice, but...), we use
 a skip regex to skip initial portions. The skip regex is tricky in that
 it only accepts something not ending in either \015 or \012, as these are
 required for the accept regex.
    $handle->push_read (regex =>
 }
 sub start_read {
    my ($self) = @_;
-   unless ($self->{_rw} || $self->{_eof}) {
+   unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
       Scalar::Util::weaken $self;
       $self->{_rw} = AE::io $self->{fh}, 0, sub {
          my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
          my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
          && ($tmp != $ERROR_SYSCALL || $!);
    while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
       $self->{wbuf} .= $tmp;
       $self->_drain_wbuf;
+      $self->{tls} or return; # tls session might have gone away in callback
    }
    $self->{_on_starttls}
       and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
       and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
 context in C<< $handle->{tls_ctx} >> after this call and can be used or
 changed to your liking. Note that the handshake might have already started
 when this function returns.
 Due to bugs in OpenSSL, it might or might not be possible to do multiple
-handshakes on the same stream. Best do not attempt to use the stream after
+handshakes on the same stream. It is best to not attempt to use the
-stopping TLS.
+stream after stopping TLS.
+This method may invoke callbacks (and therefore the handle might be
+destroyed after it returns).
 =cut
 our %TLS_CACHE; #TODO not yet documented, should we?
 =item $handle->stoptls
 Shuts down the SSL connection - this makes a proper EOF handshake by
 sending a close notify to the other side, but since OpenSSL doesn't
-support non-blocking shut downs, it is not guarenteed that you can re-use
+support non-blocking shut downs, it is not guaranteed that you can re-use
 the stream afterwards.
+This method may invoke callbacks (and therefore the handle might be
+destroyed after it returns).
 =cut
 sub stoptls {
    my ($self) = @_;
-   if ($self->{tls}) {
+   if ($self->{tls} && $self->{fh}) {
       Net::SSLeay::shutdown ($self->{tls});
       &_dotls;
 #      # we don't give a shit. no, we do, but we can't. no...#d#
       push @linger, AE::io $fh, 1, sub {
          my $len = syswrite $fh, $wbuf, length $wbuf;
          if ($len > 0) {
             substr $wbuf, 0, $len, "";
-         } else {
+         } elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK)) {
             @linger = (); # end
          }
       };
       push @linger, AE::timer $linger, 0, sub {
          @linger = ();
 sub AnyEvent::Handle::destroyed::AUTOLOAD {
    #nop
 }
+=item $handle->destroyed
+Returns false as long as the handle hasn't been destroyed by a call to C<<
+->destroy >>, true otherwise.
+Can be useful to decide whether the handle is still valid after some
+callback possibly destroyed the handle. For example, C<< ->push_write >>,
+C<< ->starttls >> and other methods can call user callbacks, which in turn
+can destroy the handle, so work can be avoided by checking sometimes:
+   $hdl->starttls ("accept");
+   return if $hdl->destroyed;
+   $hdl->push_write (...
+Note that the call to C<push_write> will silently be ignored if the handle
+has been destroyed, so often you can just ignore the possibility of the
+handle being destroyed.
+=cut
+sub destroyed { 0 }
+sub AnyEvent::Handle::destroyed::destroyed { 1 }
 =item AnyEvent::Handle::TLS_CTX
 This function creates and returns the AnyEvent::TLS object used by default
 for TLS mode.
 =item I get different callback invocations in TLS mode/Why can't I pause
 reading?
 Unlike, say, TCP, TLS connections do not consist of two independent
-communication channels, one for each direction. Or put differently. The
+communication channels, one for each direction. Or put differently, the
 read and write directions are not independent of each other: you cannot
 write data unless you are also prepared to read, and vice versa.
-This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
+This means that, in TLS mode, you might get C<on_error> or C<on_eof>
 callback invocations when you are not expecting any read data - the reason
 is that AnyEvent::Handle always reads in TLS mode.
 During the connection, you have to make sure that you always have a
 non-empty read-queue, or an C<on_read> watcher. At the end of the
       my $data = delete $_[0]{rbuf};
    });
 The reason to use C<on_error> is that TCP connections, due to latencies
 and packets loss, might get closed quite violently with an error, when in
-fact, all data has been received.
+fact all data has been received.
 It is usually better to use acknowledgements when transferring data,
 to make sure the other side hasn't just died and you got the data
 intact. This is also one reason why so many internet protocols have an
 explicit QUIT command.
 consider using C<< ->push_shutdown >> instead.
 =item I want to contact a TLS/SSL server, I don't care about security.
 If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
-simply connect to it and then create the AnyEvent::Handle with the C<tls>
+connect to it and then create the AnyEvent::Handle with the C<tls>
 parameter:
    tcp_connect $host, $port, sub {
       my ($fh) = @_;
 =item * all members not documented here and not prefixed with an underscore
 are free to use in subclasses.
 Of course, new versions of AnyEvent::Handle may introduce more "public"
-member variables, but thats just life, at least it is documented.
+member variables, but that's just life. At least it is documented.
 =back
 =head1 AUTHOR

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.185 by root, Thu Sep 3 19:48:27 2009 UTC vs. Revision 1.202 by root, Sat Oct 16 02:01:54 2010 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.185 by root, Thu Sep 3 19:48:27 2009 UTC vs.
Revision 1.202 by root, Sat Oct 16 02:01:54 2010 UTC