ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.101 by root, Thu Oct 23 19:03:30 2008 UTC vs.
Revision 1.188 by root, Thu Sep 17 08:20:14 2009 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.3;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	filehandles.
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
58	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
60		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
64	=head1 METHODS	80	=head1 METHODS
65		81
66	=over 4	82	=over 4
67		83
68	=item B<new (%args)>	84	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
69		85
70	The constructor supports these arguments (all as key => value pairs).	86	The constructor supports these arguments (all as C<< key => value >> pairs).
71		87
72	=over 4	88	=over 4
73		89
74	=item fh => $filehandle [MANDATORY]	90	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
75		91
76	The filehandle this L<AnyEvent::Handle> object will operate on.	92	The filehandle this L<AnyEvent::Handle> object will operate on.
77
78	NOTE: The filehandle will be set to non-blocking mode (using	93	NOTE: The filehandle will be set to non-blocking mode (using
79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	94	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
80	that mode.	95	that mode.
81		96
		97	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		98
		99	Try to connect to the specified host and service (port), using
		100	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		101	default C<peername>.
		102
		103	You have to specify either this parameter, or C<fh>, above.
		104
		105	It is possible to push requests on the read and write queues, and modify
		106	properties of the stream, even while AnyEvent::Handle is connecting.
		107
		108	When this parameter is specified, then the C<on_prepare>,
		109	C<on_connect_error> and C<on_connect> callbacks will be called under the
		110	appropriate circumstances:
		111
		112	=over 4
		113
		114	=item on_prepare => $cb->($handle)
		115
		116	This (rarely used) callback is called before a new connection is
		117	attempted, but after the file handle has been created. It could be used to
		118	prepare the file handle with parameters required for the actual connect
		119	(as opposed to settings that can be changed when the connection is already
		120	established).
		121
		122	The return value of this callback should be the connect timeout value in
		123	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
		124	timeout is to be used).
		125
		126	=item on_connect => $cb->($handle, $host, $port, $retry->())
		127
		128	This callback is called when a connection has been successfully established.
		129
		130	The actual numeric host and port (the socket peername) are passed as
		131	parameters, together with a retry callback.
		132
		133	When, for some reason, the handle is not acceptable, then calling
		134	C<$retry> will continue with the next connection target (in case of
		135	multi-homed hosts or SRV records there can be multiple connection
		136	endpoints). At the time it is called the read and write queues, eof
		137	status, tls status and similar properties of the handle will have been
		138	reset.
		139
		140	In most cases, ignoring the C<$retry> parameter is the way to go.
		141
		142	=item on_connect_error => $cb->($handle, $message)
		143
		144	This callback is called when the connection could not be
		145	established. C<$!> will contain the relevant error code, and C<$message> a
		146	message describing it (usually the same as C<"$!">).
		147
		148	If this callback isn't specified, then C<on_error> will be called with a
		149	fatal error instead.
		150
		151	=back
		152
		153	=item on_error => $cb->($handle, $fatal, $message)
		154
		155	This is the error callback, which is called when, well, some error
		156	occured, such as not being able to resolve the hostname, failure to
		157	connect or a read error.
		158
		159	Some errors are fatal (which is indicated by C<$fatal> being true). On
		160	fatal errors the handle object will be destroyed (by a call to C<< ->
		161	destroy >>) after invoking the error callback (which means you are free to
		162	examine the handle object). Examples of fatal errors are an EOF condition
		163	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		164	cases where the other side can close the connection at their will it is
		165	often easiest to not report C<EPIPE> errors in this callback.
		166
		167	AnyEvent::Handle tries to find an appropriate error code for you to check
		168	against, but in some cases (TLS errors), this does not work well. It is
		169	recommended to always output the C<$message> argument in human-readable
		170	error messages (it's usually the same as C<"$!">).
		171
		172	Non-fatal errors can be retried by simply returning, but it is recommended
		173	to simply ignore this parameter and instead abondon the handle object
		174	when this callback is invoked. Examples of non-fatal errors are timeouts
		175	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
		176
		177	On callback entrance, the value of C<$!> contains the operating system
		178	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		179	C<EPROTO>).
		180
		181	While not mandatory, it is I<highly> recommended to set this callback, as
		182	you will not be notified of errors otherwise. The default simply calls
		183	C<croak>.
		184
		185	=item on_read => $cb->($handle)
		186
		187	This sets the default read callback, which is called when data arrives
		188	and no read request is in the queue (unlike read queue callbacks, this
		189	callback will only be called when at least one octet of data is in the
		190	read buffer).
		191
		192	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
		193	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		194	must not enlarge or modify the read buffer, you can only remove data at
		195	the beginning from it.
		196
		197	When an EOF condition is detected then AnyEvent::Handle will first try to
		198	feed all the remaining data to the queued callbacks and C<on_read> before
		199	calling the C<on_eof> callback. If no progress can be made, then a fatal
		200	error will be raised (with C<$!> set to C<EPIPE>).
		201
		202	Note that, unlike requests in the read queue, an C<on_read> callback
		203	doesn't mean you I<require> some data: if there is an EOF and there
		204	are outstanding read requests then an error will be flagged. With an
		205	C<on_read> callback, the C<on_eof> callback will be invoked.
		206
82	=item on_eof => $cb->($handle)	207	=item on_eof => $cb->($handle)
83		208
84	Set the callback to be called when an end-of-file condition is detected,	209	Set the callback to be called when an end-of-file condition is detected,
85	i.e. in the case of a socket, when the other side has closed the	210	i.e. in the case of a socket, when the other side has closed the
86	connection cleanly.	211	connection cleanly, and there are no outstanding read requests in the
		212	queue (if there are read requests, then an EOF counts as an unexpected
		213	connection close and will be flagged as an error).
87		214
88	For sockets, this just means that the other side has stopped sending data,	215	For sockets, this just means that the other side has stopped sending data,
89	you can still try to write data, and, in fact, one can return from the EOF	216	you can still try to write data, and, in fact, one can return from the EOF
90	callback and continue writing data, as only the read part has been shut	217	callback and continue writing data, as only the read part has been shut
91	down.	218	down.
92		219
93	While not mandatory, it is I<highly> recommended to set an EOF callback,
94	otherwise you might end up with a closed socket while you are still
95	waiting for data.
96
97	If an EOF condition has been detected but no C<on_eof> callback has been	220	If an EOF condition has been detected but no C<on_eof> callback has been
98	set, then a fatal error will be raised with C<$!> set to <0>.	221	set, then a fatal error will be raised with C<$!> set to <0>.
99
100	=item on_error => $cb->($handle, $fatal)
101
102	This is the error callback, which is called when, well, some error
103	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.
105
106	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable
108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
109	errors are an EOF condition with active (but unsatisifable) read watchers
110	(C<EPIPE>) or I/O errors.
111
112	Non-fatal errors can be retried by simply returning, but it is recommended
113	to simply ignore this parameter and instead abondon the handle object
114	when this callback is invoked. Examples of non-fatal errors are timeouts
115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
116
117	On callback entrance, the value of C<$!> contains the operating system
118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
119
120	While not mandatory, it is I<highly> recommended to set this callback, as
121	you will not be notified of errors otherwise. The default simply calls
122	C<croak>.
123
124	=item on_read => $cb->($handle)
125
126	This sets the default read callback, which is called when data arrives
127	and no read request is in the queue (unlike read queue callbacks, this
128	callback will only be called when at least one octet of data is in the
129	read buffer).
130
131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
132	method or access the C<$handle->{rbuf}> member directly.
133
134	When an EOF condition is detected then AnyEvent::Handle will first try to
135	feed all the remaining data to the queued callbacks and C<on_read> before
136	calling the C<on_eof> callback. If no progress can be made, then a fatal
137	error will be raised (with C<$!> set to C<EPIPE>).
138		222
139	=item on_drain => $cb->($handle)	223	=item on_drain => $cb->($handle)
140		224
141	This sets the callback that is called when the write buffer becomes empty	225	This sets the callback that is called when the write buffer becomes empty
142	(or when the callback is set and the buffer is empty already).	226	(or when the callback is set and the buffer is empty already).
…		…
149	memory and push it into the queue, but instead only read more data from	233	memory and push it into the queue, but instead only read more data from
150	the file when the write queue becomes empty.	234	the file when the write queue becomes empty.
151		235
152	=item timeout => $fractional_seconds	236	=item timeout => $fractional_seconds
153		237
		238	=item rtimeout => $fractional_seconds
		239
		240	=item wtimeout => $fractional_seconds
		241
154	If non-zero, then this enables an "inactivity" timeout: whenever this many	242	If non-zero, then these enables an "inactivity" timeout: whenever this
155	seconds pass without a successful read or write on the underlying file	243	many seconds pass without a successful read or write on the underlying
156	handle, the C<on_timeout> callback will be invoked (and if that one is	244	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
157	missing, a non-fatal C<ETIMEDOUT> error will be raised).	245	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		246	error will be raised).
		247
		248	There are three variants of the timeouts that work fully independent
		249	of each other, for both read and write, just read, and just write:
		250	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		251	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		252	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
158		253
159	Note that timeout processing is also active when you currently do not have	254	Note that timeout processing is also active when you currently do not have
160	any outstanding read or write requests: If you plan to keep the connection	255	any outstanding read or write requests: If you plan to keep the connection
161	idle then you should disable the timout temporarily or ignore the timeout	256	idle then you should disable the timout temporarily or ignore the timeout
162	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	257	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
…		…
206	accomplishd by setting this option to a true value.	301	accomplishd by setting this option to a true value.
207		302
208	The default is your opertaing system's default behaviour (most likely	303	The default is your opertaing system's default behaviour (most likely
209	enabled), this option explicitly enables or disables it, if possible.	304	enabled), this option explicitly enables or disables it, if possible.
210		305
		306	=item keepalive => <boolean>
		307
		308	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		309	normally, TCP connections have no time-out once established, so TCP
		310	connections, once established, can stay alive forever even when the other
		311	side has long gone. TCP keepalives are a cheap way to take down long-lived
		312	TCP connections whent he other side becomes unreachable. While the default
		313	is OS-dependent, TCP keepalives usually kick in after around two hours,
		314	and, if the other side doesn't reply, take down the TCP connection some 10
		315	to 15 minutes later.
		316
		317	It is harmless to specify this option for file handles that do not support
		318	keepalives, and enabling it on connections that are potentially long-lived
		319	is usually a good idea.
		320
		321	=item oobinline => <boolean>
		322
		323	BSD majorly fucked up the implementation of TCP urgent data. The result
		324	is that almost no OS implements TCP according to the specs, and every OS
		325	implements it slightly differently.
		326
		327	If you want to handle TCP urgent data, then setting this flag (the default
		328	is enabled) gives you the most portable way of getting urgent data, by
		329	putting it into the stream.
		330
		331	Since BSD emulation of OOB data on top of TCP's urgent data can have
		332	security implications, AnyEvent::Handle sets this flag automatically
		333	unless explicitly specified. Note that setting this flag after
		334	establishing a connection I<may> be a bit too late (data loss could
		335	already have occured on BSD systems), but at least it will protect you
		336	from most attacks.
		337
211	=item read_size => <bytes>	338	=item read_size => <bytes>
212		339
213	The default read block size (the amount of bytes this module will	340	The default read block size (the amount of bytes this module will
214	try to read during each loop iteration, which affects memory	341	try to read during each loop iteration, which affects memory
215	requirements). Default: C<8192>.	342	requirements). Default: C<8192>.
…		…
235		362
236	This will not work for partial TLS data that could not be encoded	363	This will not work for partial TLS data that could not be encoded
237	yet. This data will be lost. Calling the C<stoptls> method in time might	364	yet. This data will be lost. Calling the C<stoptls> method in time might
238	help.	365	help.
239		366
		367	=item peername => $string
		368
		369	A string used to identify the remote site - usually the DNS hostname
		370	(I<not> IDN!) used to create the connection, rarely the IP address.
		371
		372	Apart from being useful in error messages, this string is also used in TLS
		373	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		374	verification will be skipped when C<peername> is not specified or
		375	C<undef>.
		376
240	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	377	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
241		378
242	When this parameter is given, it enables TLS (SSL) mode, that means	379	When this parameter is given, it enables TLS (SSL) mode, that means
243	AnyEvent will start a TLS handshake as soon as the conenction has been	380	AnyEvent will start a TLS handshake as soon as the connection has been
244	established and will transparently encrypt/decrypt data afterwards.	381	established and will transparently encrypt/decrypt data afterwards.
		382
		383	All TLS protocol errors will be signalled as C<EPROTO>, with an
		384	appropriate error message.
245		385
246	TLS mode requires Net::SSLeay to be installed (it will be loaded	386	TLS mode requires Net::SSLeay to be installed (it will be loaded
247	automatically when you try to create a TLS handle): this module doesn't	387	automatically when you try to create a TLS handle): this module doesn't
248	have a dependency on that module, so if your module requires it, you have	388	have a dependency on that module, so if your module requires it, you have
249	to add the dependency yourself.	389	to add the dependency yourself.
…		…
253	mode.	393	mode.
254		394
255	You can also provide your own TLS connection object, but you have	395	You can also provide your own TLS connection object, but you have
256	to make sure that you call either C<Net::SSLeay::set_connect_state>	396	to make sure that you call either C<Net::SSLeay::set_connect_state>
257	or C<Net::SSLeay::set_accept_state> on it before you pass it to	397	or C<Net::SSLeay::set_accept_state> on it before you pass it to
258	AnyEvent::Handle.	398	AnyEvent::Handle. Also, this module will take ownership of this connection
		399	object.
		400
		401	At some future point, AnyEvent::Handle might switch to another TLS
		402	implementation, then the option to use your own session object will go
		403	away.
		404
		405	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		406	passing in the wrong integer will lead to certain crash. This most often
		407	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		408	segmentation fault.
259		409
260	See the C<< ->starttls >> method for when need to start TLS negotiation later.	410	See the C<< ->starttls >> method for when need to start TLS negotiation later.
261		411
262	=item tls_ctx => $ssl_ctx	412	=item tls_ctx => $anyevent_tls
263		413
264	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection	414	Use the given C<AnyEvent::TLS> object to create the new TLS connection
265	(unless a connection object was specified directly). If this parameter is	415	(unless a connection object was specified directly). If this parameter is
266	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	416	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
		417
		418	Instead of an object, you can also specify a hash reference with C<< key
		419	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		420	new TLS context object.
		421
		422	=item on_starttls => $cb->($handle, $success[, $error_message])
		423
		424	This callback will be invoked when the TLS/SSL handshake has finished. If
		425	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		426	(C<on_stoptls> will not be called in this case).
		427
		428	The session in C<< $handle->{tls} >> can still be examined in this
		429	callback, even when the handshake was not successful.
		430
		431	TLS handshake failures will not cause C<on_error> to be invoked when this
		432	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		433
		434	Without this callback, handshake failures lead to C<on_error> being
		435	called, as normal.
		436
		437	Note that you cannot call C<starttls> right again in this callback. If you
		438	need to do that, start an zero-second timer instead whose callback can
		439	then call C<< ->starttls >> again.
		440
		441	=item on_stoptls => $cb->($handle)
		442
		443	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		444	set, then it will be invoked after freeing the TLS session. If it is not,
		445	then a TLS shutdown condition will be treated like a normal EOF condition
		446	on the handle.
		447
		448	The session in C<< $handle->{tls} >> can still be examined in this
		449	callback.
		450
		451	This callback will only be called on TLS shutdowns, not when the
		452	underlying handle signals EOF.
267		453
268	=item json => JSON or JSON::XS object	454	=item json => JSON or JSON::XS object
269		455
270	This is the json coder object used by the C<json> read and write types.	456	This is the json coder object used by the C<json> read and write types.
271		457
…		…
280		466
281	=cut	467	=cut
282		468
283	sub new {	469	sub new {
284	my $class = shift;	470	my $class = shift;
285
286	my $self = bless { @_ }, $class;	471	my $self = bless { @_ }, $class;
287		472
288	$self->{fh} or Carp::croak "mandatory argument fh is missing";	473	if ($self->{fh}) {
		474	$self->_start;
		475	return unless $self->{fh}; # could be gone by now
		476
		477	} elsif ($self->{connect}) {
		478	require AnyEvent::Socket;
		479
		480	$self->{peername} = $self->{connect}[0]
		481	unless exists $self->{peername};
		482
		483	$self->{_skip_drain_rbuf} = 1;
		484
		485	{
		486	Scalar::Util::weaken (my $self = $self);
		487
		488	$self->{_connect} =
		489	AnyEvent::Socket::tcp_connect (
		490	$self->{connect}[0],
		491	$self->{connect}[1],
		492	sub {
		493	my ($fh, $host, $port, $retry) = @_;
		494
		495	if ($fh) {
		496	$self->{fh} = $fh;
		497
		498	delete $self->{_skip_drain_rbuf};
		499	$self->_start;
		500
		501	$self->{on_connect}
		502	and $self->{on_connect}($self, $host, $port, sub {
		503	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		504	$self->{_skip_drain_rbuf} = 1;
		505	&$retry;
		506	});
		507
		508	} else {
		509	if ($self->{on_connect_error}) {
		510	$self->{on_connect_error}($self, "$!");
		511	$self->destroy;
		512	} else {
		513	$self->_error ($!, 1);
		514	}
		515	}
		516	},
		517	sub {
		518	local $self->{fh} = $_[0];
		519
		520	$self->{on_prepare}
		521	? $self->{on_prepare}->($self)
		522	: ()
		523	}
		524	);
		525	}
		526
		527	} else {
		528	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		529	}
		530
		531	$self
		532	}
		533
		534	sub _start {
		535	my ($self) = @_;
289		536
290	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	537	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
291		538
		539	$self->{_activity} =
		540	$self->{_ractivity} =
		541	$self->{_wactivity} = AE::now;
		542
		543	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		544	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		545	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		546
		547	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		548	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		549
		550	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		551
292	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})	552	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
293	if $self->{tls};	553	if $self->{tls};
294		554
295	$self->{_activity} = AnyEvent->now;
296	$self->_timeout;
297
298	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	555	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
299	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
300		556
301	$self->start_read	557	$self->start_read
302	if $self->{on_read};	558	if $self->{on_read} || @{ $self->{_queue} };
303		559
304	$self	560	$self->_drain_wbuf;
305	}
306
307	sub _shutdown {
308	my ($self) = @_;
309
310	delete $self->{_tw};
311	delete $self->{_rw};
312	delete $self->{_ww};
313	delete $self->{fh};
314
315	&_freetls;
316
317	delete $self->{on_read};
318	delete $self->{_queue};
319	}	561	}
320		562
321	sub _error {	563	sub _error {
322	my ($self, $errno, $fatal) = @_;	564	my ($self, $errno, $fatal, $message) = @_;
323
324	$self->_shutdown
325	if $fatal;
326		565
327	$! = $errno;	566	$! = $errno;
		567	$message ||= "$!";
328		568
329	if ($self->{on_error}) {	569	if ($self->{on_error}) {
330	$self->{on_error}($self, $fatal);	570	$self->{on_error}($self, $fatal, $message);
331	} elsif ($self->{fh}) {	571	$self->destroy if $fatal;
		572	} elsif ($self->{fh} || $self->{connect}) {
		573	$self->destroy;
332	Carp::croak "AnyEvent::Handle uncaught error: $!";	574	Carp::croak "AnyEvent::Handle uncaught error: $message";
333	}	575	}
334	}	576	}
335		577
336	=item $fh = $handle->fh	578	=item $fh = $handle->fh
337		579
…		…
361	$_[0]{on_eof} = $_[1];	603	$_[0]{on_eof} = $_[1];
362	}	604	}
363		605
364	=item $handle->on_timeout ($cb)	606	=item $handle->on_timeout ($cb)
365		607
366	Replace the current C<on_timeout> callback, or disables the callback (but	608	=item $handle->on_rtimeout ($cb)
367	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
368	argument and method.
369		609
370	=cut	610	=item $handle->on_wtimeout ($cb)
371		611
372	sub on_timeout {	612	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
373	$_[0]{on_timeout} = $_[1];	613	callback, or disables the callback (but not the timeout) if C<$cb> =
374	}	614	C<undef>. See the C<timeout> constructor argument and method.
		615
		616	=cut
		617
		618	# see below
375		619
376	=item $handle->autocork ($boolean)	620	=item $handle->autocork ($boolean)
377		621
378	Enables or disables the current autocork behaviour (see C<autocork>	622	Enables or disables the current autocork behaviour (see C<autocork>
379	constructor argument).	623	constructor argument). Changes will only take effect on the next write.
380		624
381	=cut	625	=cut
		626
		627	sub autocork {
		628	$_[0]{autocork} = $_[1];
		629	}
382		630
383	=item $handle->no_delay ($boolean)	631	=item $handle->no_delay ($boolean)
384		632
385	Enables or disables the C<no_delay> setting (see constructor argument of	633	Enables or disables the C<no_delay> setting (see constructor argument of
386	the same name for details).	634	the same name for details).
…		…
390	sub no_delay {	638	sub no_delay {
391	$_[0]{no_delay} = $_[1];	639	$_[0]{no_delay} = $_[1];
392		640
393	eval {	641	eval {
394	local $SIG{__DIE__};	642	local $SIG{__DIE__};
395	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	643	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		644	if $_[0]{fh};
396	};	645	};
397	}	646	}
398		647
		648	=item $handle->keepalive ($boolean)
		649
		650	Enables or disables the C<keepalive> setting (see constructor argument of
		651	the same name for details).
		652
		653	=cut
		654
		655	sub keepalive {
		656	$_[0]{keepalive} = $_[1];
		657
		658	eval {
		659	local $SIG{__DIE__};
		660	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		661	if $_[0]{fh};
		662	};
		663	}
		664
		665	=item $handle->oobinline ($boolean)
		666
		667	Enables or disables the C<oobinline> setting (see constructor argument of
		668	the same name for details).
		669
		670	=cut
		671
		672	sub oobinline {
		673	$_[0]{oobinline} = $_[1];
		674
		675	eval {
		676	local $SIG{__DIE__};
		677	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		678	if $_[0]{fh};
		679	};
		680	}
		681
		682	=item $handle->keepalive ($boolean)
		683
		684	Enables or disables the C<keepalive> setting (see constructor argument of
		685	the same name for details).
		686
		687	=cut
		688
		689	sub keepalive {
		690	$_[0]{keepalive} = $_[1];
		691
		692	eval {
		693	local $SIG{__DIE__};
		694	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		695	if $_[0]{fh};
		696	};
		697	}
		698
		699	=item $handle->on_starttls ($cb)
		700
		701	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		702
		703	=cut
		704
		705	sub on_starttls {
		706	$_[0]{on_starttls} = $_[1];
		707	}
		708
		709	=item $handle->on_stoptls ($cb)
		710
		711	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		712
		713	=cut
		714
		715	sub on_starttls {
		716	$_[0]{on_stoptls} = $_[1];
		717	}
		718
		719	=item $handle->rbuf_max ($max_octets)
		720
		721	Configures the C<rbuf_max> setting (C<undef> disables it).
		722
		723	=cut
		724
		725	sub rbuf_max {
		726	$_[0]{rbuf_max} = $_[1];
		727	}
		728
399	#############################################################################	729	#############################################################################
400		730
401	=item $handle->timeout ($seconds)	731	=item $handle->timeout ($seconds)
402		732
		733	=item $handle->rtimeout ($seconds)
		734
		735	=item $handle->wtimeout ($seconds)
		736
403	Configures (or disables) the inactivity timeout.	737	Configures (or disables) the inactivity timeout.
404		738
405	=cut	739	=item $handle->timeout_reset
406		740
407	sub timeout {	741	=item $handle->rtimeout_reset
		742
		743	=item $handle->wtimeout_reset
		744
		745	Reset the activity timeout, as if data was received or sent.
		746
		747	These methods are cheap to call.
		748
		749	=cut
		750
		751	for my $dir ("", "r", "w") {
		752	my $timeout = "${dir}timeout";
		753	my $tw = "_${dir}tw";
		754	my $on_timeout = "on_${dir}timeout";
		755	my $activity = "_${dir}activity";
		756	my $cb;
		757
		758	*$on_timeout = sub {
		759	$_[0]{$on_timeout} = $_[1];
		760	};
		761
		762	*$timeout = sub {
408	my ($self, $timeout) = @_;	763	my ($self, $new_value) = @_;
409		764
410	$self->{timeout} = $timeout;	765	$self->{$timeout} = $new_value;
411	$self->_timeout;	766	delete $self->{$tw}; &$cb;
412	}	767	};
413		768
		769	*{"${dir}timeout_reset"} = sub {
		770	$_[0]{$activity} = AE::now;
		771	};
		772
		773	# main workhorse:
414	# reset the timeout watcher, as neccessary	774	# reset the timeout watcher, as neccessary
415	# also check for time-outs	775	# also check for time-outs
416	sub _timeout {	776	$cb = sub {
417	my ($self) = @_;	777	my ($self) = @_;
418		778
419	if ($self->{timeout}) {	779	if ($self->{$timeout} && $self->{fh}) {
420	my $NOW = AnyEvent->now;	780	my $NOW = AE::now;
421		781
422	# when would the timeout trigger?	782	# when would the timeout trigger?
423	my $after = $self->{_activity} + $self->{timeout} - $NOW;	783	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
424		784
425	# now or in the past already?	785	# now or in the past already?
426	if ($after <= 0) {	786	if ($after <= 0) {
427	$self->{_activity} = $NOW;	787	$self->{$activity} = $NOW;
428		788
429	if ($self->{on_timeout}) {	789	if ($self->{$on_timeout}) {
430	$self->{on_timeout}($self);	790	$self->{$on_timeout}($self);
431	} else {	791	} else {
432	$self->_error (&Errno::ETIMEDOUT);	792	$self->_error (Errno::ETIMEDOUT);
		793	}
		794
		795	# callback could have changed timeout value, optimise
		796	return unless $self->{$timeout};
		797
		798	# calculate new after
		799	$after = $self->{$timeout};
433	}	800	}
434		801
435	# callback could have changed timeout value, optimise	802	Scalar::Util::weaken $self;
436	return unless $self->{timeout};	803	return unless $self; # ->error could have destroyed $self
437		804
438	# calculate new after	805	$self->{$tw} ||= AE::timer $after, 0, sub {
439	$after = $self->{timeout};	806	delete $self->{$tw};
		807	$cb->($self);
		808	};
		809	} else {
		810	delete $self->{$tw};
440	}	811	}
441
442	Scalar::Util::weaken $self;
443	return unless $self; # ->error could have destroyed $self
444
445	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
446	delete $self->{_tw};
447	$self->_timeout;
448	});
449	} else {
450	delete $self->{_tw};
451	}	812	}
452	}	813	}
453		814
454	#############################################################################	815	#############################################################################
455		816
…		…
500	Scalar::Util::weaken $self;	861	Scalar::Util::weaken $self;
501		862
502	my $cb = sub {	863	my $cb = sub {
503	my $len = syswrite $self->{fh}, $self->{wbuf};	864	my $len = syswrite $self->{fh}, $self->{wbuf};
504		865
505	if ($len >= 0) {	866	if (defined $len) {
506	substr $self->{wbuf}, 0, $len, "";	867	substr $self->{wbuf}, 0, $len, "";
507		868
508	$self->{_activity} = AnyEvent->now;	869	$self->{_activity} = $self->{_wactivity} = AE::now;
509		870
510	$self->{on_drain}($self)	871	$self->{on_drain}($self)
511	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})	872	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
512	&& $self->{on_drain};	873	&& $self->{on_drain};
513		874
…		…
519		880
520	# try to write data immediately	881	# try to write data immediately
521	$cb->() unless $self->{autocork};	882	$cb->() unless $self->{autocork};
522		883
523	# if still data left in wbuf, we need to poll	884	# if still data left in wbuf, we need to poll
524	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	885	$self->{_ww} = AE::io $self->{fh}, 1, $cb
525	if length $self->{wbuf};	886	if length $self->{wbuf};
526	};	887	};
527	}	888	}
528		889
529	our %WH;	890	our %WH;
530		891
		892	# deprecated
531	sub register_write_type($$) {	893	sub register_write_type($$) {
532	$WH{$_[0]} = $_[1];	894	$WH{$_[0]} = $_[1];
533	}	895	}
534		896
535	sub push_write {	897	sub push_write {
536	my $self = shift;	898	my $self = shift;
537		899
538	if (@_ > 1) {	900	if (@_ > 1) {
539	my $type = shift;	901	my $type = shift;
540		902
		903	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
541	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	904	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
542	->($self, @_);	905	->($self, @_);
543	}	906	}
544		907
545	if ($self->{tls}) {	908	if ($self->{tls}) {
546	$self->{_tls_wbuf} .= $_[0];	909	$self->{_tls_wbuf} .= $_[0];
547		910	&_dotls ($self) if $self->{fh};
548	&_dotls ($self);
549	} else {	911	} else {
550	$self->{wbuf} .= $_[0];	912	$self->{wbuf} .= $_[0];
551	$self->_drain_wbuf;	913	$self->_drain_wbuf if $self->{fh};
552	}	914	}
553	}	915	}
554		916
555	=item $handle->push_write (type => @args)	917	=item $handle->push_write (type => @args)
556		918
557	Instead of formatting your data yourself, you can also let this module do	919	Instead of formatting your data yourself, you can also let this module
558	the job by specifying a type and type-specific arguments.	920	do the job by specifying a type and type-specific arguments. You
		921	can also specify the (fully qualified) name of a package, in which
		922	case AnyEvent tries to load the package and then expects to find the
		923	C<anyevent_read_type> function inside (see "custom write types", below).
559		924
560	Predefined types are (if you have ideas for additional types, feel free to	925	Predefined types are (if you have ideas for additional types, feel free to
561	drop by and tell us):	926	drop by and tell us):
562		927
563	=over 4	928	=over 4
…		…
620	Other languages could read single lines terminated by a newline and pass	985	Other languages could read single lines terminated by a newline and pass
621	this line into their JSON decoder of choice.	986	this line into their JSON decoder of choice.
622		987
623	=cut	988	=cut
624		989
		990	sub json_coder() {
		991	eval { require JSON::XS; JSON::XS->new->utf8 }
		992	|| do { require JSON; JSON->new->utf8 }
		993	}
		994
625	register_write_type json => sub {	995	register_write_type json => sub {
626	my ($self, $ref) = @_;	996	my ($self, $ref) = @_;
627		997
628	require JSON;	998	my $json = $self->{json} ||= json_coder;
629		999
630	$self->{json} ? $self->{json}->encode ($ref)	1000	$json->encode ($ref)
631	: JSON::encode_json ($ref)
632	};	1001	};
633		1002
634	=item storable => $reference	1003	=item storable => $reference
635		1004
636	Freezes the given reference using L<Storable> and writes it to the	1005	Freezes the given reference using L<Storable> and writes it to the
…		…
646	pack "w/a*", Storable::nfreeze ($ref)	1015	pack "w/a*", Storable::nfreeze ($ref)
647	};	1016	};
648		1017
649	=back	1018	=back
650		1019
651	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1020	=item $handle->push_shutdown
652		1021
653	This function (not method) lets you add your own types to C<push_write>.	1022	Sometimes you know you want to close the socket after writing your data
		1023	before it was actually written. One way to do that is to replace your
		1024	C<on_drain> handler by a callback that shuts down the socket (and set
		1025	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1026	replaces the C<on_drain> callback with:
		1027
		1028	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1029
		1030	This simply shuts down the write side and signals an EOF condition to the
		1031	the peer.
		1032
		1033	You can rely on the normal read queue and C<on_eof> handling
		1034	afterwards. This is the cleanest way to close a connection.
		1035
		1036	=cut
		1037
		1038	sub push_shutdown {
		1039	my ($self) = @_;
		1040
		1041	delete $self->{low_water_mark};
		1042	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1043	}
		1044
		1045	=item custom write types - Package::anyevent_write_type $handle, @args
		1046
		1047	Instead of one of the predefined types, you can also specify the name of
		1048	a package. AnyEvent will try to load the package and then expects to find
		1049	a function named C<anyevent_write_type> inside. If it isn't found, it
		1050	progressively tries to load the parent package until it either finds the
		1051	function (good) or runs out of packages (bad).
		1052
654	Whenever the given C<type> is used, C<push_write> will invoke the code	1053	Whenever the given C<type> is used, C<push_write> will the function with
655	reference with the handle object and the remaining arguments.	1054	the handle object and the remaining arguments.
656		1055
657	The code reference is supposed to return a single octet string that will	1056	The function is supposed to return a single octet string that will be
658	be appended to the write buffer.	1057	appended to the write buffer, so you cna mentally treat this function as a
		1058	"arguments to on-the-wire-format" converter.
659		1059
660	Note that this is a function, and all types registered this way will be	1060	Example: implement a custom write type C<join> that joins the remaining
661	global, so try to use unique names.	1061	arguments using the first one.
		1062
		1063	$handle->push_write (My::Type => " ", 1,2,3);
		1064
		1065	# uses the following package, which can be defined in the "My::Type" or in
		1066	# the "My" modules to be auto-loaded, or just about anywhere when the
		1067	# My::Type::anyevent_write_type is defined before invoking it.
		1068
		1069	package My::Type;
		1070
		1071	sub anyevent_write_type {
		1072	my ($handle, $delim, @args) = @_;
		1073
		1074	join $delim, @args
		1075	}
662		1076
663	=cut	1077	=cut
664		1078
665	#############################################################################	1079	#############################################################################
666		1080
…		…
748	=cut	1162	=cut
749		1163
750	sub _drain_rbuf {	1164	sub _drain_rbuf {
751	my ($self) = @_;	1165	my ($self) = @_;
752		1166
		1167	# avoid recursion
		1168	return if $self->{_skip_drain_rbuf};
753	local $self->{_in_drain} = 1;	1169	local $self->{_skip_drain_rbuf} = 1;
754
755	if (
756	defined $self->{rbuf_max}
757	&& $self->{rbuf_max} < length $self->{rbuf}
758	) {
759	$self->_error (&Errno::ENOSPC, 1), return;
760	}
761		1170
762	while () {	1171	while () {
		1172	# we need to use a separate tls read buffer, as we must not receive data while
		1173	# we are draining the buffer, and this can only happen with TLS.
		1174	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1175	if exists $self->{_tls_rbuf};
		1176
763	my $len = length $self->{rbuf};	1177	my $len = length $self->{rbuf};
764		1178
765	if (my $cb = shift @{ $self->{_queue} }) {	1179	if (my $cb = shift @{ $self->{_queue} }) {
766	unless ($cb->($self)) {	1180	unless ($cb->($self)) {
767	if ($self->{_eof}) {	1181	# no progress can be made
768	# no progress can be made (not enough data and no data forthcoming)	1182	# (not enough data and no data forthcoming)
769	$self->_error (&Errno::EPIPE, 1), return;	1183	$self->_error (Errno::EPIPE, 1), return
770	}	1184	if $self->{_eof};
771		1185
772	unshift @{ $self->{_queue} }, $cb;	1186	unshift @{ $self->{_queue} }, $cb;
773	last;	1187	last;
774	}	1188	}
775	} elsif ($self->{on_read}) {	1189	} elsif ($self->{on_read}) {
…		…
782	&& !@{ $self->{_queue} } # and the queue is still empty	1196	&& !@{ $self->{_queue} } # and the queue is still empty
783	&& $self->{on_read} # but we still have on_read	1197	&& $self->{on_read} # but we still have on_read
784	) {	1198	) {
785	# no further data will arrive	1199	# no further data will arrive
786	# so no progress can be made	1200	# so no progress can be made
787	$self->_error (&Errno::EPIPE, 1), return	1201	$self->_error (Errno::EPIPE, 1), return
788	if $self->{_eof};	1202	if $self->{_eof};
789		1203
790	last; # more data might arrive	1204	last; # more data might arrive
791	}	1205	}
792	} else {	1206	} else {
…		…
795	last;	1209	last;
796	}	1210	}
797	}	1211	}
798		1212
799	if ($self->{_eof}) {	1213	if ($self->{_eof}) {
800	if ($self->{on_eof}) {	1214	$self->{on_eof}
801	$self->{on_eof}($self)	1215	? $self->{on_eof}($self)
802	} else {	1216	: $self->_error (0, 1, "Unexpected end-of-file");
803	$self->_error (0, 1);	1217
804	}	1218	return;
		1219	}
		1220
		1221	if (
		1222	defined $self->{rbuf_max}
		1223	&& $self->{rbuf_max} < length $self->{rbuf}
		1224	) {
		1225	$self->_error (Errno::ENOSPC, 1), return;
805	}	1226	}
806		1227
807	# may need to restart read watcher	1228	# may need to restart read watcher
808	unless ($self->{_rw}) {	1229	unless ($self->{_rw}) {
809	$self->start_read	1230	$self->start_read
…		…
821		1242
822	sub on_read {	1243	sub on_read {
823	my ($self, $cb) = @_;	1244	my ($self, $cb) = @_;
824		1245
825	$self->{on_read} = $cb;	1246	$self->{on_read} = $cb;
826	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1247	$self->_drain_rbuf if $cb;
827	}	1248	}
828		1249
829	=item $handle->rbuf	1250	=item $handle->rbuf
830		1251
831	Returns the read buffer (as a modifiable lvalue).	1252	Returns the read buffer (as a modifiable lvalue).
832		1253
833	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1254	You can access the read buffer directly as the C<< ->{rbuf} >>
834	you want.	1255	member, if you want. However, the only operation allowed on the
		1256	read buffer (apart from looking at it) is removing data from its
		1257	beginning. Otherwise modifying or appending to it is not allowed and will
		1258	lead to hard-to-track-down bugs.
835		1259
836	NOTE: The read buffer should only be used or modified if the C<on_read>,	1260	NOTE: The read buffer should only be used or modified if the C<on_read>,
837	C<push_read> or C<unshift_read> methods are used. The other read methods	1261	C<push_read> or C<unshift_read> methods are used. The other read methods
838	automatically manage the read buffer.	1262	automatically manage the read buffer.
839		1263
…		…
875	my $cb = pop;	1299	my $cb = pop;
876		1300
877	if (@_) {	1301	if (@_) {
878	my $type = shift;	1302	my $type = shift;
879		1303
		1304	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
880	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1305	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
881	->($self, $cb, @_);	1306	->($self, $cb, @_);
882	}	1307	}
883		1308
884	push @{ $self->{_queue} }, $cb;	1309	push @{ $self->{_queue} }, $cb;
885	$self->_drain_rbuf unless $self->{_in_drain};	1310	$self->_drain_rbuf;
886	}	1311	}
887		1312
888	sub unshift_read {	1313	sub unshift_read {
889	my $self = shift;	1314	my $self = shift;
890	my $cb = pop;	1315	my $cb = pop;
…		…
894		1319
895	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1320	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
896	->($self, $cb, @_);	1321	->($self, $cb, @_);
897	}	1322	}
898		1323
899
900	unshift @{ $self->{_queue} }, $cb;	1324	unshift @{ $self->{_queue} }, $cb;
901	$self->_drain_rbuf unless $self->{_in_drain};	1325	$self->_drain_rbuf;
902	}	1326	}
903		1327
904	=item $handle->push_read (type => @args, $cb)	1328	=item $handle->push_read (type => @args, $cb)
905		1329
906	=item $handle->unshift_read (type => @args, $cb)	1330	=item $handle->unshift_read (type => @args, $cb)
907		1331
908	Instead of providing a callback that parses the data itself you can chose	1332	Instead of providing a callback that parses the data itself you can chose
909	between a number of predefined parsing formats, for chunks of data, lines	1333	between a number of predefined parsing formats, for chunks of data, lines
910	etc.	1334	etc. You can also specify the (fully qualified) name of a package, in
		1335	which case AnyEvent tries to load the package and then expects to find the
		1336	C<anyevent_read_type> function inside (see "custom read types", below).
911		1337
912	Predefined types are (if you have ideas for additional types, feel free to	1338	Predefined types are (if you have ideas for additional types, feel free to
913	drop by and tell us):	1339	drop by and tell us):
914		1340
915	=over 4	1341	=over 4
…		…
1039	return 1;	1465	return 1;
1040	}	1466	}
1041		1467
1042	# reject	1468	# reject
1043	if ($reject && $$rbuf =~ $reject) {	1469	if ($reject && $$rbuf =~ $reject) {
1044	$self->_error (&Errno::EBADMSG);	1470	$self->_error (Errno::EBADMSG);
1045	}	1471	}
1046		1472
1047	# skip	1473	# skip
1048	if ($skip && $$rbuf =~ $skip) {	1474	if ($skip && $$rbuf =~ $skip) {
1049	$data .= substr $$rbuf, 0, $+[0], "";	1475	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1065	my ($self, $cb) = @_;	1491	my ($self, $cb) = @_;
1066		1492
1067	sub {	1493	sub {
1068	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1494	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1069	if ($_[0]{rbuf} =~ /[^0-9]/) {	1495	if ($_[0]{rbuf} =~ /[^0-9]/) {
1070	$self->_error (&Errno::EBADMSG);	1496	$self->_error (Errno::EBADMSG);
1071	}	1497	}
1072	return;	1498	return;
1073	}	1499	}
1074		1500
1075	my $len = $1;	1501	my $len = $1;
…		…
1078	my $string = $_[1];	1504	my $string = $_[1];
1079	$_[0]->unshift_read (chunk => 1, sub {	1505	$_[0]->unshift_read (chunk => 1, sub {
1080	if ($_[1] eq ",") {	1506	if ($_[1] eq ",") {
1081	$cb->($_[0], $string);	1507	$cb->($_[0], $string);
1082	} else {	1508	} else {
1083	$self->_error (&Errno::EBADMSG);	1509	$self->_error (Errno::EBADMSG);
1084	}	1510	}
1085	});	1511	});
1086	});	1512	});
1087		1513
1088	1	1514	1
…		…
1135	}	1561	}
1136	};	1562	};
1137		1563
1138	=item json => $cb->($handle, $hash_or_arrayref)	1564	=item json => $cb->($handle, $hash_or_arrayref)
1139		1565
1140	Reads a JSON object or array, decodes it and passes it to the callback.	1566	Reads a JSON object or array, decodes it and passes it to the
		1567	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1141		1568
1142	If a C<json> object was passed to the constructor, then that will be used	1569	If a C<json> object was passed to the constructor, then that will be used
1143	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1570	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1144		1571
1145	This read type uses the incremental parser available with JSON version	1572	This read type uses the incremental parser available with JSON version
…		…
1154	=cut	1581	=cut
1155		1582
1156	register_read_type json => sub {	1583	register_read_type json => sub {
1157	my ($self, $cb) = @_;	1584	my ($self, $cb) = @_;
1158		1585
1159	require JSON;	1586	my $json = $self->{json} ||= json_coder;
1160		1587
1161	my $data;	1588	my $data;
1162	my $rbuf = \$self->{rbuf};	1589	my $rbuf = \$self->{rbuf};
1163		1590
1164	my $json = $self->{json} ||= JSON->new->utf8;
1165
1166	sub {	1591	sub {
1167	my $ref = $json->incr_parse ($self->{rbuf});	1592	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1168		1593
1169	if ($ref) {	1594	if ($ref) {
1170	$self->{rbuf} = $json->incr_text;	1595	$self->{rbuf} = $json->incr_text;
1171	$json->incr_text = "";	1596	$json->incr_text = "";
1172	$cb->($self, $ref);	1597	$cb->($self, $ref);
1173		1598
1174	1	1599	1
		1600	} elsif ($@) {
		1601	# error case
		1602	$json->incr_skip;
		1603
		1604	$self->{rbuf} = $json->incr_text;
		1605	$json->incr_text = "";
		1606
		1607	$self->_error (Errno::EBADMSG);
		1608
		1609	()
1175	} else {	1610	} else {
1176	$self->{rbuf} = "";	1611	$self->{rbuf} = "";
		1612
1177	()	1613	()
1178	}	1614	}
1179	}	1615	}
1180	};	1616	};
1181		1617
…		…
1213	# read remaining chunk	1649	# read remaining chunk
1214	$_[0]->unshift_read (chunk => $len, sub {	1650	$_[0]->unshift_read (chunk => $len, sub {
1215	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1651	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1216	$cb->($_[0], $ref);	1652	$cb->($_[0], $ref);
1217	} else {	1653	} else {
1218	$self->_error (&Errno::EBADMSG);	1654	$self->_error (Errno::EBADMSG);
1219	}	1655	}
1220	});	1656	});
1221	}	1657	}
1222		1658
1223	1	1659	1
1224	}	1660	}
1225	};	1661	};
1226		1662
1227	=back	1663	=back
1228		1664
1229	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1665	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1230		1666
1231	This function (not method) lets you add your own types to C<push_read>.	1667	Instead of one of the predefined types, you can also specify the name
		1668	of a package. AnyEvent will try to load the package and then expects to
		1669	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1670	progressively tries to load the parent package until it either finds the
		1671	function (good) or runs out of packages (bad).
1232		1672
1233	Whenever the given C<type> is used, C<push_read> will invoke the code	1673	Whenever this type is used, C<push_read> will invoke the function with the
1234	reference with the handle object, the callback and the remaining	1674	handle object, the original callback and the remaining arguments.
1235	arguments.
1236		1675
1237	The code reference is supposed to return a callback (usually a closure)	1676	The function is supposed to return a callback (usually a closure) that
1238	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1677	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1678	mentally treat the function as a "configurable read type to read callback"
		1679	converter.
1239		1680
1240	It should invoke the passed callback when it is done reading (remember to	1681	It should invoke the original callback when it is done reading (remember
1241	pass C<$handle> as first argument as all other callbacks do that).	1682	to pass C<$handle> as first argument as all other callbacks do that,
		1683	although there is no strict requirement on this).
1242		1684
1243	Note that this is a function, and all types registered this way will be
1244	global, so try to use unique names.
1245
1246	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1685	For examples, see the source of this module (F<perldoc -m
1247	search for C<register_read_type>)).	1686	AnyEvent::Handle>, search for C<register_read_type>)).
1248		1687
1249	=item $handle->stop_read	1688	=item $handle->stop_read
1250		1689
1251	=item $handle->start_read	1690	=item $handle->start_read
1252		1691
…		…
1275	my ($self) = @_;	1714	my ($self) = @_;
1276		1715
1277	unless ($self->{_rw} || $self->{_eof}) {	1716	unless ($self->{_rw} || $self->{_eof}) {
1278	Scalar::Util::weaken $self;	1717	Scalar::Util::weaken $self;
1279		1718
1280	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1719	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1281	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});	1720	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1282	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1721	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1283		1722
1284	if ($len > 0) {	1723	if ($len > 0) {
1285	$self->{_activity} = AnyEvent->now;	1724	$self->{_activity} = $self->{_ractivity} = AE::now;
1286		1725
1287	if ($self->{tls}) {	1726	if ($self->{tls}) {
1288	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);	1727	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1289		1728
1290	&_dotls ($self);	1729	&_dotls ($self);
1291	} else {	1730	} else {
1292	$self->_drain_rbuf unless $self->{_in_drain};	1731	$self->_drain_rbuf;
1293	}	1732	}
1294		1733
1295	} elsif (defined $len) {	1734	} elsif (defined $len) {
1296	delete $self->{_rw};	1735	delete $self->{_rw};
1297	$self->{_eof} = 1;	1736	$self->{_eof} = 1;
1298	$self->_drain_rbuf unless $self->{_in_drain};	1737	$self->_drain_rbuf;
1299		1738
1300	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1739	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1301	return $self->_error ($!, 1);	1740	return $self->_error ($!, 1);
1302	}	1741	}
1303	});	1742	};
		1743	}
		1744	}
		1745
		1746	our $ERROR_SYSCALL;
		1747	our $ERROR_WANT_READ;
		1748
		1749	sub _tls_error {
		1750	my ($self, $err) = @_;
		1751
		1752	return $self->_error ($!, 1)
		1753	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1754
		1755	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1756
		1757	# reduce error string to look less scary
		1758	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1759
		1760	if ($self->{_on_starttls}) {
		1761	(delete $self->{_on_starttls})->($self, undef, $err);
		1762	&_freetls;
		1763	} else {
		1764	&_freetls;
		1765	$self->_error (Errno::EPROTO, 1, $err);
1304	}	1766	}
1305	}	1767	}
1306		1768
1307	# poll the write BIO and send the data if applicable	1769	# poll the write BIO and send the data if applicable
		1770	# also decode read data if possible
		1771	# this is basiclaly our TLS state machine
		1772	# more efficient implementations are possible with openssl,
		1773	# but not with the buggy and incomplete Net::SSLeay.
1308	sub _dotls {	1774	sub _dotls {
1309	my ($self) = @_;	1775	my ($self) = @_;
1310		1776
1311	my $tmp;	1777	my $tmp;
1312		1778
1313	if (length $self->{_tls_wbuf}) {	1779	if (length $self->{_tls_wbuf}) {
1314	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1780	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1315	substr $self->{_tls_wbuf}, 0, $tmp, "";	1781	substr $self->{_tls_wbuf}, 0, $tmp, "";
1316	}	1782	}
		1783
		1784	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1785	return $self->_tls_error ($tmp)
		1786	if $tmp != $ERROR_WANT_READ
		1787	&& ($tmp != $ERROR_SYSCALL || $!);
1317	}	1788	}
1318		1789
1319	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {	1790	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1320	unless (length $tmp) {	1791	unless (length $tmp) {
1321	# let's treat SSL-eof as we treat normal EOF	1792	$self->{_on_starttls}
1322	delete $self->{_rw};	1793	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
1323	$self->{_eof} = 1;
1324	&_freetls;	1794	&_freetls;
		1795
		1796	if ($self->{on_stoptls}) {
		1797	$self->{on_stoptls}($self);
		1798	return;
		1799	} else {
		1800	# let's treat SSL-eof as we treat normal EOF
		1801	delete $self->{_rw};
		1802	$self->{_eof} = 1;
		1803	}
1325	}	1804	}
1326		1805
1327	$self->{rbuf} .= $tmp;	1806	$self->{_tls_rbuf} .= $tmp;
1328	$self->_drain_rbuf unless $self->{_in_drain};	1807	$self->_drain_rbuf;
1329	$self->{tls} or return; # tls session might have gone away in callback	1808	$self->{tls} or return; # tls session might have gone away in callback
1330	}	1809	}
1331		1810
1332	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);	1811	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1333
1334	if ($tmp != Net::SSLeay::ERROR_WANT_READ ()) {
1335	if ($tmp == Net::SSLeay::ERROR_SYSCALL ()) {
1336	return $self->_error ($!, 1);	1812	return $self->_tls_error ($tmp)
1337	} elsif ($tmp == Net::SSLeay::ERROR_SSL ()) {	1813	if $tmp != $ERROR_WANT_READ
1338	return $self->_error (&Errno::EIO, 1);	1814	&& ($tmp != $ERROR_SYSCALL || $!);
1339	}
1340
1341	# all other errors are fine for our purposes
1342	}
1343		1815
1344	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1816	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1345	$self->{wbuf} .= $tmp;	1817	$self->{wbuf} .= $tmp;
1346	$self->_drain_wbuf;	1818	$self->_drain_wbuf;
1347	}	1819	}
		1820
		1821	$self->{_on_starttls}
		1822	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
		1823	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1348	}	1824	}
1349		1825
1350	=item $handle->starttls ($tls[, $tls_ctx])	1826	=item $handle->starttls ($tls[, $tls_ctx])
1351		1827
1352	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1828	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1353	object is created, you can also do that at a later time by calling	1829	object is created, you can also do that at a later time by calling
1354	C<starttls>.	1830	C<starttls>.
1355		1831
		1832	Starting TLS is currently an asynchronous operation - when you push some
		1833	write data and then call C<< ->starttls >> then TLS negotiation will start
		1834	immediately, after which the queued write data is then sent.
		1835
1356	The first argument is the same as the C<tls> constructor argument (either	1836	The first argument is the same as the C<tls> constructor argument (either
1357	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1837	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1358		1838
1359	The second argument is the optional C<Net::SSLeay::CTX> object that is	1839	The second argument is the optional C<AnyEvent::TLS> object that is used
1360	used when AnyEvent::Handle has to create its own TLS connection object.	1840	when AnyEvent::Handle has to create its own TLS connection object, or
		1841	a hash reference with C<< key => value >> pairs that will be used to
		1842	construct a new context.
1361		1843
1362	The TLS connection object will end up in C<< $handle->{tls} >> after this	1844	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1363	call and can be used or changed to your liking. Note that the handshake	1845	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1364	might have already started when this function returns.	1846	changed to your liking. Note that the handshake might have already started
		1847	when this function returns.
1365		1848
1366	If it an error to start a TLS handshake more than once per	1849	Due to bugs in OpenSSL, it might or might not be possible to do multiple
1367	AnyEvent::Handle object (this is due to bugs in OpenSSL).	1850	handshakes on the same stream. Best do not attempt to use the stream after
		1851	stopping TLS.
1368		1852
1369	=cut	1853	=cut
		1854
		1855	our %TLS_CACHE; #TODO not yet documented, should we?
1370		1856
1371	sub starttls {	1857	sub starttls {
1372	my ($self, $ssl, $ctx) = @_;	1858	my ($self, $tls, $ctx) = @_;
		1859
		1860	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1861	if $self->{tls};
		1862
		1863	$self->{tls} = $tls;
		1864	$self->{tls_ctx} = $ctx if @_ > 2;
		1865
		1866	return unless $self->{fh};
1373		1867
1374	require Net::SSLeay;	1868	require Net::SSLeay;
1375		1869
1376	Carp::croak "it is an error to call starttls more than once on an Anyevent::Handle object"	1870	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1377	if $self->{tls};	1871	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1872
		1873	$tls = delete $self->{tls};
		1874	$ctx = $self->{tls_ctx};
		1875
		1876	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1877
		1878	if ("HASH" eq ref $ctx) {
		1879	require AnyEvent::TLS;
		1880
		1881	if ($ctx->{cache}) {
		1882	my $key = $ctx+0;
		1883	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1884	} else {
		1885	$ctx = new AnyEvent::TLS %$ctx;
		1886	}
		1887	}
1378		1888
1379	if ($ssl eq "accept") {	1889	$self->{tls_ctx} = $ctx || TLS_CTX ();
1380	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1890	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1381	Net::SSLeay::set_accept_state ($ssl);
1382	} elsif ($ssl eq "connect") {
1383	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());
1384	Net::SSLeay::set_connect_state ($ssl);
1385	}
1386
1387	$self->{tls} = $ssl;
1388		1891
1389	# basically, this is deep magic (because SSL_read should have the same issues)	1892	# basically, this is deep magic (because SSL_read should have the same issues)
1390	# but the openssl maintainers basically said: "trust us, it just works".	1893	# but the openssl maintainers basically said: "trust us, it just works".
1391	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1894	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1392	# and mismaintained ssleay-module doesn't even offer them).	1895	# and mismaintained ssleay-module doesn't even offer them).
…		…
1396	#	1899	#
1397	# note that we do not try to keep the length constant between writes as we are required to do.	1900	# note that we do not try to keep the length constant between writes as we are required to do.
1398	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	1901	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1399	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to	1902	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
1400	# have identity issues in that area.	1903	# have identity issues in that area.
1401	Net::SSLeay::CTX_set_mode ($self->{tls},	1904	# Net::SSLeay::CTX_set_mode ($ssl,
1402	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1905	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1403	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1906	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1907	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1404		1908
1405	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1909	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1406	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1910	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1407		1911
		1912	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1913
1408	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1914	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
		1915
		1916	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
		1917	if $self->{on_starttls};
1409		1918
1410	&_dotls; # need to trigger the initial handshake	1919	&_dotls; # need to trigger the initial handshake
1411	$self->start_read; # make sure we actually do read	1920	$self->start_read; # make sure we actually do read
1412	}	1921	}
1413		1922
1414	=item $handle->stoptls	1923	=item $handle->stoptls
1415		1924
1416	Shuts down the SSL connection - this makes a proper EOF handshake by	1925	Shuts down the SSL connection - this makes a proper EOF handshake by
1417	sending a close notify to the other side, but since OpenSSL doesn't	1926	sending a close notify to the other side, but since OpenSSL doesn't
1418	support non-blocking shut downs, it is not possible to re-use the stream	1927	support non-blocking shut downs, it is not guarenteed that you can re-use
1419	afterwards.	1928	the stream afterwards.
1420		1929
1421	=cut	1930	=cut
1422		1931
1423	sub stoptls {	1932	sub stoptls {
1424	my ($self) = @_;	1933	my ($self) = @_;
…		…
1426	if ($self->{tls}) {	1935	if ($self->{tls}) {
1427	Net::SSLeay::shutdown ($self->{tls});	1936	Net::SSLeay::shutdown ($self->{tls});
1428		1937
1429	&_dotls;	1938	&_dotls;
1430		1939
1431	# we don't give a shit. no, we do, but we can't. no...	1940	# # we don't give a shit. no, we do, but we can't. no...#d#
1432	# we, we... have to use openssl :/	1941	# # we, we... have to use openssl :/#d#
1433	&_freetls;	1942	# &_freetls;#d#
1434	}	1943	}
1435	}	1944	}
1436		1945
1437	sub _freetls {	1946	sub _freetls {
1438	my ($self) = @_;	1947	my ($self) = @_;
1439		1948
1440	return unless $self->{tls};	1949	return unless $self->{tls};
1441		1950
1442	Net::SSLeay::free (delete $self->{tls});	1951	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1952	if $self->{tls} > 0;
1443		1953
1444	delete @$self{qw(_rbio _wbio _tls_wbuf)};	1954	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1445	}	1955	}
1446		1956
1447	sub DESTROY {	1957	sub DESTROY {
1448	my $self = shift;	1958	my ($self) = @_;
1449		1959
1450	&_freetls;	1960	&_freetls;
1451		1961
1452	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1962	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1453		1963
1454	if ($linger && length $self->{wbuf}) {	1964	if ($linger && length $self->{wbuf} && $self->{fh}) {
1455	my $fh = delete $self->{fh};	1965	my $fh = delete $self->{fh};
1456	my $wbuf = delete $self->{wbuf};	1966	my $wbuf = delete $self->{wbuf};
1457		1967
1458	my @linger;	1968	my @linger;
1459		1969
1460	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	1970	push @linger, AE::io $fh, 1, sub {
1461	my $len = syswrite $fh, $wbuf, length $wbuf;	1971	my $len = syswrite $fh, $wbuf, length $wbuf;
1462		1972
1463	if ($len > 0) {	1973	if ($len > 0) {
1464	substr $wbuf, 0, $len, "";	1974	substr $wbuf, 0, $len, "";
1465	} else {	1975	} else {
1466	@linger = (); # end	1976	@linger = (); # end
1467	}	1977	}
1468	});	1978	};
1469	push @linger, AnyEvent->timer (after => $linger, cb => sub {	1979	push @linger, AE::timer $linger, 0, sub {
1470	@linger = ();	1980	@linger = ();
1471	});	1981	};
1472	}	1982	}
1473	}	1983	}
1474		1984
1475	=item $handle->destroy	1985	=item $handle->destroy
1476		1986
1477	Shuts down the handle object as much as possible - this call ensures that	1987	Shuts down the handle object as much as possible - this call ensures that
1478	no further callbacks will be invoked and resources will be freed as much	1988	no further callbacks will be invoked and as many resources as possible
1479	as possible. You must not call any methods on the object afterwards.	1989	will be freed. Any method you will call on the handle object after
		1990	destroying it in this way will be silently ignored (and it will return the
		1991	empty list).
1480		1992
1481	Normally, you can just "forget" any references to an AnyEvent::Handle	1993	Normally, you can just "forget" any references to an AnyEvent::Handle
1482	object and it will simply shut down. This works in fatal error and EOF	1994	object and it will simply shut down. This works in fatal error and EOF
1483	callbacks, as well as code outside. It does I<NOT> work in a read or write	1995	callbacks, as well as code outside. It does I<NOT> work in a read or write
1484	callback, so when you want to destroy the AnyEvent::Handle object from	1996	callback, so when you want to destroy the AnyEvent::Handle object from
1485	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in	1997	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
1486	that case.	1998	that case.
1487		1999
		2000	Destroying the handle object in this way has the advantage that callbacks
		2001	will be removed as well, so if those are the only reference holders (as
		2002	is common), then one doesn't need to do anything special to break any
		2003	reference cycles.
		2004
1488	The handle might still linger in the background and write out remaining	2005	The handle might still linger in the background and write out remaining
1489	data, as specified by the C<linger> option, however.	2006	data, as specified by the C<linger> option, however.
1490		2007
1491	=cut	2008	=cut
1492		2009
1493	sub destroy {	2010	sub destroy {
1494	my ($self) = @_;	2011	my ($self) = @_;
1495		2012
1496	$self->DESTROY;	2013	$self->DESTROY;
1497	%$self = ();	2014	%$self = ();
		2015	bless $self, "AnyEvent::Handle::destroyed";
		2016	}
		2017
		2018	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2019	#nop
1498	}	2020	}
1499		2021
1500	=item AnyEvent::Handle::TLS_CTX	2022	=item AnyEvent::Handle::TLS_CTX
1501		2023
1502	This function creates and returns the Net::SSLeay::CTX object used by	2024	This function creates and returns the AnyEvent::TLS object used by default
1503	default for TLS mode.	2025	for TLS mode.
1504		2026
1505	The context is created like this:	2027	The context is created by calling L<AnyEvent::TLS> without any arguments.
1506
1507	Net::SSLeay::load_error_strings;
1508	Net::SSLeay::SSLeay_add_ssl_algorithms;
1509	Net::SSLeay::randomize;
1510
1511	my $CTX = Net::SSLeay::CTX_new;
1512
1513	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1514		2028
1515	=cut	2029	=cut
1516		2030
1517	our $TLS_CTX;	2031	our $TLS_CTX;
1518		2032
1519	sub TLS_CTX() {	2033	sub TLS_CTX() {
1520	$TLS_CTX || do {	2034	$TLS_CTX ||= do {
1521	require Net::SSLeay;	2035	require AnyEvent::TLS;
1522		2036
1523	Net::SSLeay::load_error_strings ();	2037	new AnyEvent::TLS
1524	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1525	Net::SSLeay::randomize ();
1526
1527	$TLS_CTX = Net::SSLeay::CTX_new ();
1528
1529	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1530
1531	$TLS_CTX
1532	}	2038	}
1533	}	2039	}
1534		2040
1535	=back	2041	=back
1536		2042
…		…
1575		2081
1576	$handle->on_read (sub { });	2082	$handle->on_read (sub { });
1577	$handle->on_eof (undef);	2083	$handle->on_eof (undef);
1578	$handle->on_error (sub {	2084	$handle->on_error (sub {
1579	my $data = delete $_[0]{rbuf};	2085	my $data = delete $_[0]{rbuf};
1580	undef $handle;
1581	});	2086	});
1582		2087
1583	The reason to use C<on_error> is that TCP connections, due to latencies	2088	The reason to use C<on_error> is that TCP connections, due to latencies
1584	and packets loss, might get closed quite violently with an error, when in	2089	and packets loss, might get closed quite violently with an error, when in
1585	fact, all data has been received.	2090	fact, all data has been received.
…		…
1601	$handle->on_drain (sub {	2106	$handle->on_drain (sub {
1602	warn "all data submitted to the kernel\n";	2107	warn "all data submitted to the kernel\n";
1603	undef $handle;	2108	undef $handle;
1604	});	2109	});
1605		2110
		2111	If you just want to queue some data and then signal EOF to the other side,
		2112	consider using C<< ->push_shutdown >> instead.
		2113
		2114	=item I want to contact a TLS/SSL server, I don't care about security.
		2115
		2116	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2117	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		2118	parameter:
		2119
		2120	tcp_connect $host, $port, sub {
		2121	my ($fh) = @_;
		2122
		2123	my $handle = new AnyEvent::Handle
		2124	fh => $fh,
		2125	tls => "connect",
		2126	on_error => sub { ... };
		2127
		2128	$handle->push_write (...);
		2129	};
		2130
		2131	=item I want to contact a TLS/SSL server, I do care about security.
		2132
		2133	Then you should additionally enable certificate verification, including
		2134	peername verification, if the protocol you use supports it (see
		2135	L<AnyEvent::TLS>, C<verify_peername>).
		2136
		2137	E.g. for HTTPS:
		2138
		2139	tcp_connect $host, $port, sub {
		2140	my ($fh) = @_;
		2141
		2142	my $handle = new AnyEvent::Handle
		2143	fh => $fh,
		2144	peername => $host,
		2145	tls => "connect",
		2146	tls_ctx => { verify => 1, verify_peername => "https" },
		2147	...
		2148
		2149	Note that you must specify the hostname you connected to (or whatever
		2150	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2151	peername verification will be done.
		2152
		2153	The above will use the system-dependent default set of trusted CA
		2154	certificates. If you want to check against a specific CA, add the
		2155	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2156
		2157	tls_ctx => {
		2158	verify => 1,
		2159	verify_peername => "https",
		2160	ca_file => "my-ca-cert.pem",
		2161	},
		2162
		2163	=item I want to create a TLS/SSL server, how do I do that?
		2164
		2165	Well, you first need to get a server certificate and key. You have
		2166	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2167	self-signed certificate (cheap. check the search engine of your choice,
		2168	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2169	nice program for that purpose).
		2170
		2171	Then create a file with your private key (in PEM format, see
		2172	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2173	file should then look like this:
		2174
		2175	-----BEGIN RSA PRIVATE KEY-----
		2176	...header data
		2177	... lots of base64'y-stuff
		2178	-----END RSA PRIVATE KEY-----
		2179
		2180	-----BEGIN CERTIFICATE-----
		2181	... lots of base64'y-stuff
		2182	-----END CERTIFICATE-----
		2183
		2184	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2185	specify this file as C<cert_file>:
		2186
		2187	tcp_server undef, $port, sub {
		2188	my ($fh) = @_;
		2189
		2190	my $handle = new AnyEvent::Handle
		2191	fh => $fh,
		2192	tls => "accept",
		2193	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2194	...
		2195
		2196	When you have intermediate CA certificates that your clients might not
		2197	know about, just append them to the C<cert_file>.
		2198
1606	=back	2199	=back
1607		2200
1608		2201
1609	=head1 SUBCLASSING AnyEvent::Handle	2202	=head1 SUBCLASSING AnyEvent::Handle
1610		2203

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines