ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.140 by root, Mon Jul 6 00:45:00 2009 UTC vs.
Revision 1.192 by root, Fri Mar 12 23:22:14 2010 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.452;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
		15	my ($hdl, $fatal, $msg) = @_;
		16	warn "got error $msg\n";
		17	$hdl->destroy;
32	$cv->send;	18	$cv->send;
33	},
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	filehandles.
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
58	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
60		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
64	=head1 METHODS	80	=head1 METHODS
65		81
66	=over 4	82	=over 4
67		83
68	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...	84	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
69		85
70	The constructor supports these arguments (all as C<< key => value >> pairs).	86	The constructor supports these arguments (all as C<< key => value >> pairs).
71		87
72	=over 4	88	=over 4
73		89
74	=item fh => $filehandle [MANDATORY]	90	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
75		91
76	The filehandle this L<AnyEvent::Handle> object will operate on.	92	The filehandle this L<AnyEvent::Handle> object will operate on.
77
78	NOTE: The filehandle will be set to non-blocking mode (using	93	NOTE: The filehandle will be set to non-blocking mode (using
79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	94	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
80	that mode.	95	that mode.
81		96
		97	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		98
		99	Try to connect to the specified host and service (port), using
		100	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		101	default C<peername>.
		102
		103	You have to specify either this parameter, or C<fh>, above.
		104
		105	It is possible to push requests on the read and write queues, and modify
		106	properties of the stream, even while AnyEvent::Handle is connecting.
		107
		108	When this parameter is specified, then the C<on_prepare>,
		109	C<on_connect_error> and C<on_connect> callbacks will be called under the
		110	appropriate circumstances:
		111
		112	=over 4
		113
		114	=item on_prepare => $cb->($handle)
		115
		116	This (rarely used) callback is called before a new connection is
		117	attempted, but after the file handle has been created. It could be used to
		118	prepare the file handle with parameters required for the actual connect
		119	(as opposed to settings that can be changed when the connection is already
		120	established).
		121
		122	The return value of this callback should be the connect timeout value in
		123	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
		124	timeout is to be used).
		125
		126	=item on_connect => $cb->($handle, $host, $port, $retry->())
		127
		128	This callback is called when a connection has been successfully established.
		129
		130	The actual numeric host and port (the socket peername) are passed as
		131	parameters, together with a retry callback.
		132
		133	When, for some reason, the handle is not acceptable, then calling
		134	C<$retry> will continue with the next connection target (in case of
		135	multi-homed hosts or SRV records there can be multiple connection
		136	endpoints). At the time it is called the read and write queues, eof
		137	status, tls status and similar properties of the handle will have been
		138	reset.
		139
		140	In most cases, ignoring the C<$retry> parameter is the way to go.
		141
		142	=item on_connect_error => $cb->($handle, $message)
		143
		144	This callback is called when the connection could not be
		145	established. C<$!> will contain the relevant error code, and C<$message> a
		146	message describing it (usually the same as C<"$!">).
		147
		148	If this callback isn't specified, then C<on_error> will be called with a
		149	fatal error instead.
		150
		151	=back
		152
		153	=item on_error => $cb->($handle, $fatal, $message)
		154
		155	This is the error callback, which is called when, well, some error
		156	occured, such as not being able to resolve the hostname, failure to
		157	connect or a read error.
		158
		159	Some errors are fatal (which is indicated by C<$fatal> being true). On
		160	fatal errors the handle object will be destroyed (by a call to C<< ->
		161	destroy >>) after invoking the error callback (which means you are free to
		162	examine the handle object). Examples of fatal errors are an EOF condition
		163	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		164	cases where the other side can close the connection at their will it is
		165	often easiest to not report C<EPIPE> errors in this callback.
		166
		167	AnyEvent::Handle tries to find an appropriate error code for you to check
		168	against, but in some cases (TLS errors), this does not work well. It is
		169	recommended to always output the C<$message> argument in human-readable
		170	error messages (it's usually the same as C<"$!">).
		171
		172	Non-fatal errors can be retried by simply returning, but it is recommended
		173	to simply ignore this parameter and instead abondon the handle object
		174	when this callback is invoked. Examples of non-fatal errors are timeouts
		175	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
		176
		177	On callback entrance, the value of C<$!> contains the operating system
		178	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		179	C<EPROTO>).
		180
		181	While not mandatory, it is I<highly> recommended to set this callback, as
		182	you will not be notified of errors otherwise. The default simply calls
		183	C<croak>.
		184
		185	=item on_read => $cb->($handle)
		186
		187	This sets the default read callback, which is called when data arrives
		188	and no read request is in the queue (unlike read queue callbacks, this
		189	callback will only be called when at least one octet of data is in the
		190	read buffer).
		191
		192	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
		193	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		194	must not enlarge or modify the read buffer, you can only remove data at
		195	the beginning from it.
		196
		197	When an EOF condition is detected then AnyEvent::Handle will first try to
		198	feed all the remaining data to the queued callbacks and C<on_read> before
		199	calling the C<on_eof> callback. If no progress can be made, then a fatal
		200	error will be raised (with C<$!> set to C<EPIPE>).
		201
		202	Note that, unlike requests in the read queue, an C<on_read> callback
		203	doesn't mean you I<require> some data: if there is an EOF and there
		204	are outstanding read requests then an error will be flagged. With an
		205	C<on_read> callback, the C<on_eof> callback will be invoked.
		206
82	=item on_eof => $cb->($handle)	207	=item on_eof => $cb->($handle)
83		208
84	Set the callback to be called when an end-of-file condition is detected,	209	Set the callback to be called when an end-of-file condition is detected,
85	i.e. in the case of a socket, when the other side has closed the	210	i.e. in the case of a socket, when the other side has closed the
86	connection cleanly.	211	connection cleanly, and there are no outstanding read requests in the
		212	queue (if there are read requests, then an EOF counts as an unexpected
		213	connection close and will be flagged as an error).
87		214
88	For sockets, this just means that the other side has stopped sending data,	215	For sockets, this just means that the other side has stopped sending data,
89	you can still try to write data, and, in fact, one can return from the EOF	216	you can still try to write data, and, in fact, one can return from the EOF
90	callback and continue writing data, as only the read part has been shut	217	callback and continue writing data, as only the read part has been shut
91	down.	218	down.
92		219
93	While not mandatory, it is I<highly> recommended to set an EOF callback,
94	otherwise you might end up with a closed socket while you are still
95	waiting for data.
96
97	If an EOF condition has been detected but no C<on_eof> callback has been	220	If an EOF condition has been detected but no C<on_eof> callback has been
98	set, then a fatal error will be raised with C<$!> set to <0>.	221	set, then a fatal error will be raised with C<$!> set to <0>.
99
100	=item on_error => $cb->($handle, $fatal, $message)
101
102	This is the error callback, which is called when, well, some error
103	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.
105
106	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable
108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
109	errors are an EOF condition with active (but unsatisifable) read watchers
110	(C<EPIPE>) or I/O errors.
111
112	AnyEvent::Handle tries to find an appropriate error code for you to check
113	against, but in some cases (TLS errors), this does not work well. It is
114	recommended to always output the C<$message> argument in human-readable
115	error messages (it's usually the same as C<"$!">).
116
117	Non-fatal errors can be retried by simply returning, but it is recommended
118	to simply ignore this parameter and instead abondon the handle object
119	when this callback is invoked. Examples of non-fatal errors are timeouts
120	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
121
122	On callback entrance, the value of C<$!> contains the operating system
123	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
124	C<EPROTO>).
125
126	While not mandatory, it is I<highly> recommended to set this callback, as
127	you will not be notified of errors otherwise. The default simply calls
128	C<croak>.
129
130	=item on_read => $cb->($handle)
131
132	This sets the default read callback, which is called when data arrives
133	and no read request is in the queue (unlike read queue callbacks, this
134	callback will only be called when at least one octet of data is in the
135	read buffer).
136
137	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
138	method or access the C<< $handle->{rbuf} >> member directly. Note that you
139	must not enlarge or modify the read buffer, you can only remove data at
140	the beginning from it.
141
142	When an EOF condition is detected then AnyEvent::Handle will first try to
143	feed all the remaining data to the queued callbacks and C<on_read> before
144	calling the C<on_eof> callback. If no progress can be made, then a fatal
145	error will be raised (with C<$!> set to C<EPIPE>).
146		222
147	=item on_drain => $cb->($handle)	223	=item on_drain => $cb->($handle)
148		224
149	This sets the callback that is called when the write buffer becomes empty	225	This sets the callback that is called when the write buffer becomes empty
150	(or when the callback is set and the buffer is empty already).	226	(or when the callback is set and the buffer is empty already).
…		…
157	memory and push it into the queue, but instead only read more data from	233	memory and push it into the queue, but instead only read more data from
158	the file when the write queue becomes empty.	234	the file when the write queue becomes empty.
159		235
160	=item timeout => $fractional_seconds	236	=item timeout => $fractional_seconds
161		237
		238	=item rtimeout => $fractional_seconds
		239
		240	=item wtimeout => $fractional_seconds
		241
162	If non-zero, then this enables an "inactivity" timeout: whenever this many	242	If non-zero, then these enables an "inactivity" timeout: whenever this
163	seconds pass without a successful read or write on the underlying file	243	many seconds pass without a successful read or write on the underlying
164	handle, the C<on_timeout> callback will be invoked (and if that one is	244	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
165	missing, a non-fatal C<ETIMEDOUT> error will be raised).	245	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		246	error will be raised).
		247
		248	There are three variants of the timeouts that work fully independent
		249	of each other, for both read and write, just read, and just write:
		250	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		251	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		252	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
166		253
167	Note that timeout processing is also active when you currently do not have	254	Note that timeout processing is also active when you currently do not have
168	any outstanding read or write requests: If you plan to keep the connection	255	any outstanding read or write requests: If you plan to keep the connection
169	idle then you should disable the timout temporarily or ignore the timeout	256	idle then you should disable the timout temporarily or ignore the timeout
170	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	257	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
…		…
214	accomplishd by setting this option to a true value.	301	accomplishd by setting this option to a true value.
215		302
216	The default is your opertaing system's default behaviour (most likely	303	The default is your opertaing system's default behaviour (most likely
217	enabled), this option explicitly enables or disables it, if possible.	304	enabled), this option explicitly enables or disables it, if possible.
218		305
		306	=item keepalive => <boolean>
		307
		308	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		309	normally, TCP connections have no time-out once established, so TCP
		310	connections, once established, can stay alive forever even when the other
		311	side has long gone. TCP keepalives are a cheap way to take down long-lived
		312	TCP connections whent he other side becomes unreachable. While the default
		313	is OS-dependent, TCP keepalives usually kick in after around two hours,
		314	and, if the other side doesn't reply, take down the TCP connection some 10
		315	to 15 minutes later.
		316
		317	It is harmless to specify this option for file handles that do not support
		318	keepalives, and enabling it on connections that are potentially long-lived
		319	is usually a good idea.
		320
		321	=item oobinline => <boolean>
		322
		323	BSD majorly fucked up the implementation of TCP urgent data. The result
		324	is that almost no OS implements TCP according to the specs, and every OS
		325	implements it slightly differently.
		326
		327	If you want to handle TCP urgent data, then setting this flag (the default
		328	is enabled) gives you the most portable way of getting urgent data, by
		329	putting it into the stream.
		330
		331	Since BSD emulation of OOB data on top of TCP's urgent data can have
		332	security implications, AnyEvent::Handle sets this flag automatically
		333	unless explicitly specified. Note that setting this flag after
		334	establishing a connection I<may> be a bit too late (data loss could
		335	already have occured on BSD systems), but at least it will protect you
		336	from most attacks.
		337
219	=item read_size => <bytes>	338	=item read_size => <bytes>
220		339
221	The default read block size (the amount of bytes this module will	340	The default read block size (the amount of bytes this module will
222	try to read during each loop iteration, which affects memory	341	try to read during each loop iteration, which affects memory
223	requirements). Default: C<8192>.	342	requirements). Default: C<8192>.
…		…
249		368
250	A string used to identify the remote site - usually the DNS hostname	369	A string used to identify the remote site - usually the DNS hostname
251	(I<not> IDN!) used to create the connection, rarely the IP address.	370	(I<not> IDN!) used to create the connection, rarely the IP address.
252		371
253	Apart from being useful in error messages, this string is also used in TLS	372	Apart from being useful in error messages, this string is also used in TLS
254	peername verification (see C<verify_peername> in L<AnyEvent::TLS>).	373	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		374	verification will be skipped when C<peername> is not specified or
		375	C<undef>.
255		376
256	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	377	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
257		378
258	When this parameter is given, it enables TLS (SSL) mode, that means	379	When this parameter is given, it enables TLS (SSL) mode, that means
259	AnyEvent will start a TLS handshake as soon as the conenction has been	380	AnyEvent will start a TLS handshake as soon as the connection has been
260	established and will transparently encrypt/decrypt data afterwards.	381	established and will transparently encrypt/decrypt data afterwards.
261		382
262	All TLS protocol errors will be signalled as C<EPROTO>, with an	383	All TLS protocol errors will be signalled as C<EPROTO>, with an
263	appropriate error message.	384	appropriate error message.
264		385
…		…
296		417
297	Instead of an object, you can also specify a hash reference with C<< key	418	Instead of an object, you can also specify a hash reference with C<< key
298	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a	419	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
299	new TLS context object.	420	new TLS context object.
300		421
		422	=item on_starttls => $cb->($handle, $success[, $error_message])
		423
		424	This callback will be invoked when the TLS/SSL handshake has finished. If
		425	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		426	(C<on_stoptls> will not be called in this case).
		427
		428	The session in C<< $handle->{tls} >> can still be examined in this
		429	callback, even when the handshake was not successful.
		430
		431	TLS handshake failures will not cause C<on_error> to be invoked when this
		432	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		433
		434	Without this callback, handshake failures lead to C<on_error> being
		435	called, as normal.
		436
		437	Note that you cannot call C<starttls> right again in this callback. If you
		438	need to do that, start an zero-second timer instead whose callback can
		439	then call C<< ->starttls >> again.
		440
		441	=item on_stoptls => $cb->($handle)
		442
		443	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		444	set, then it will be invoked after freeing the TLS session. If it is not,
		445	then a TLS shutdown condition will be treated like a normal EOF condition
		446	on the handle.
		447
		448	The session in C<< $handle->{tls} >> can still be examined in this
		449	callback.
		450
		451	This callback will only be called on TLS shutdowns, not when the
		452	underlying handle signals EOF.
		453
301	=item json => JSON or JSON::XS object	454	=item json => JSON or JSON::XS object
302		455
303	This is the json coder object used by the C<json> read and write types.	456	This is the json coder object used by the C<json> read and write types.
304		457
305	If you don't supply it, then AnyEvent::Handle will create and use a	458	If you don't supply it, then AnyEvent::Handle will create and use a
…		…
315		468
316	sub new {	469	sub new {
317	my $class = shift;	470	my $class = shift;
318	my $self = bless { @_ }, $class;	471	my $self = bless { @_ }, $class;
319		472
320	$self->{fh} or Carp::croak "mandatory argument fh is missing";	473	if ($self->{fh}) {
		474	$self->_start;
		475	return unless $self->{fh}; # could be gone by now
		476
		477	} elsif ($self->{connect}) {
		478	require AnyEvent::Socket;
		479
		480	$self->{peername} = $self->{connect}[0]
		481	unless exists $self->{peername};
		482
		483	$self->{_skip_drain_rbuf} = 1;
		484
		485	{
		486	Scalar::Util::weaken (my $self = $self);
		487
		488	$self->{_connect} =
		489	AnyEvent::Socket::tcp_connect (
		490	$self->{connect}[0],
		491	$self->{connect}[1],
		492	sub {
		493	my ($fh, $host, $port, $retry) = @_;
		494
		495	if ($fh) {
		496	$self->{fh} = $fh;
		497
		498	delete $self->{_skip_drain_rbuf};
		499	$self->_start;
		500
		501	$self->{on_connect}
		502	and $self->{on_connect}($self, $host, $port, sub {
		503	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		504	$self->{_skip_drain_rbuf} = 1;
		505	&$retry;
		506	});
		507
		508	} else {
		509	if ($self->{on_connect_error}) {
		510	$self->{on_connect_error}($self, "$!");
		511	$self->destroy;
		512	} else {
		513	$self->_error ($!, 1);
		514	}
		515	}
		516	},
		517	sub {
		518	local $self->{fh} = $_[0];
		519
		520	$self->{on_prepare}
		521	? $self->{on_prepare}->($self)
		522	: ()
		523	}
		524	);
		525	}
		526
		527	} else {
		528	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		529	}
		530
		531	$self
		532	}
		533
		534	sub _start {
		535	my ($self) = @_;
321		536
322	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	537	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
323		538
		539	$self->{_activity} =
		540	$self->{_ractivity} =
324	$self->{_activity} = AnyEvent->now;	541	$self->{_wactivity} = AE::now;
325	$self->_timeout;
326		542
		543	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		544	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		545	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		546
327	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};	547	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		548	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
328		549
		550	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		551
329	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})	552	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
330	if $self->{tls};	553	if $self->{tls};
331		554
332	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	555	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
333		556
334	$self->start_read	557	$self->start_read
335	if $self->{on_read};	558	if $self->{on_read} || @{ $self->{_queue} };
336		559
337	$self->{fh} && $self	560	$self->_drain_wbuf;
338	}
339
340	sub _shutdown {
341	my ($self) = @_;
342
343	delete @$self{qw(_tw _rw _ww fh wbuf on_read _queue)};
344	$self->{_eof} = 1; # tell starttls et. al to stop trying
345
346	&_freetls;
347	}	561	}
348		562
349	sub _error {	563	sub _error {
350	my ($self, $errno, $fatal, $message) = @_;	564	my ($self, $errno, $fatal, $message) = @_;
351		565
352	$self->_shutdown
353	if $fatal;
354
355	$! = $errno;	566	$! = $errno;
356	$message ||= "$!";	567	$message ||= "$!";
357		568
358	if ($self->{on_error}) {	569	if ($self->{on_error}) {
359	$self->{on_error}($self, $fatal, $message);	570	$self->{on_error}($self, $fatal, $message);
360	} elsif ($self->{fh}) {	571	$self->destroy if $fatal;
		572	} elsif ($self->{fh} || $self->{connect}) {
		573	$self->destroy;
361	Carp::croak "AnyEvent::Handle uncaught error: $message";	574	Carp::croak "AnyEvent::Handle uncaught error: $message";
362	}	575	}
363	}	576	}
364		577
365	=item $fh = $handle->fh	578	=item $fh = $handle->fh
…		…
390	$_[0]{on_eof} = $_[1];	603	$_[0]{on_eof} = $_[1];
391	}	604	}
392		605
393	=item $handle->on_timeout ($cb)	606	=item $handle->on_timeout ($cb)
394		607
395	Replace the current C<on_timeout> callback, or disables the callback (but	608	=item $handle->on_rtimeout ($cb)
396	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
397	argument and method.
398		609
399	=cut	610	=item $handle->on_wtimeout ($cb)
400		611
401	sub on_timeout {	612	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
402	$_[0]{on_timeout} = $_[1];	613	callback, or disables the callback (but not the timeout) if C<$cb> =
403	}	614	C<undef>. See the C<timeout> constructor argument and method.
		615
		616	=cut
		617
		618	# see below
404		619
405	=item $handle->autocork ($boolean)	620	=item $handle->autocork ($boolean)
406		621
407	Enables or disables the current autocork behaviour (see C<autocork>	622	Enables or disables the current autocork behaviour (see C<autocork>
408	constructor argument). Changes will only take effect on the next write.	623	constructor argument). Changes will only take effect on the next write.
…		…
423	sub no_delay {	638	sub no_delay {
424	$_[0]{no_delay} = $_[1];	639	$_[0]{no_delay} = $_[1];
425		640
426	eval {	641	eval {
427	local $SIG{__DIE__};	642	local $SIG{__DIE__};
428	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	643	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		644	if $_[0]{fh};
429	};	645	};
430	}	646	}
431		647
		648	=item $handle->keepalive ($boolean)
		649
		650	Enables or disables the C<keepalive> setting (see constructor argument of
		651	the same name for details).
		652
		653	=cut
		654
		655	sub keepalive {
		656	$_[0]{keepalive} = $_[1];
		657
		658	eval {
		659	local $SIG{__DIE__};
		660	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		661	if $_[0]{fh};
		662	};
		663	}
		664
		665	=item $handle->oobinline ($boolean)
		666
		667	Enables or disables the C<oobinline> setting (see constructor argument of
		668	the same name for details).
		669
		670	=cut
		671
		672	sub oobinline {
		673	$_[0]{oobinline} = $_[1];
		674
		675	eval {
		676	local $SIG{__DIE__};
		677	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		678	if $_[0]{fh};
		679	};
		680	}
		681
		682	=item $handle->keepalive ($boolean)
		683
		684	Enables or disables the C<keepalive> setting (see constructor argument of
		685	the same name for details).
		686
		687	=cut
		688
		689	sub keepalive {
		690	$_[0]{keepalive} = $_[1];
		691
		692	eval {
		693	local $SIG{__DIE__};
		694	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		695	if $_[0]{fh};
		696	};
		697	}
		698
		699	=item $handle->on_starttls ($cb)
		700
		701	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		702
		703	=cut
		704
		705	sub on_starttls {
		706	$_[0]{on_starttls} = $_[1];
		707	}
		708
		709	=item $handle->on_stoptls ($cb)
		710
		711	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		712
		713	=cut
		714
		715	sub on_stoptls {
		716	$_[0]{on_stoptls} = $_[1];
		717	}
		718
		719	=item $handle->rbuf_max ($max_octets)
		720
		721	Configures the C<rbuf_max> setting (C<undef> disables it).
		722
		723	=cut
		724
		725	sub rbuf_max {
		726	$_[0]{rbuf_max} = $_[1];
		727	}
		728
432	#############################################################################	729	#############################################################################
433		730
434	=item $handle->timeout ($seconds)	731	=item $handle->timeout ($seconds)
435		732
		733	=item $handle->rtimeout ($seconds)
		734
		735	=item $handle->wtimeout ($seconds)
		736
436	Configures (or disables) the inactivity timeout.	737	Configures (or disables) the inactivity timeout.
437		738
438	=cut	739	=item $handle->timeout_reset
439		740
440	sub timeout {	741	=item $handle->rtimeout_reset
		742
		743	=item $handle->wtimeout_reset
		744
		745	Reset the activity timeout, as if data was received or sent.
		746
		747	These methods are cheap to call.
		748
		749	=cut
		750
		751	for my $dir ("", "r", "w") {
		752	my $timeout = "${dir}timeout";
		753	my $tw = "_${dir}tw";
		754	my $on_timeout = "on_${dir}timeout";
		755	my $activity = "_${dir}activity";
		756	my $cb;
		757
		758	*$on_timeout = sub {
		759	$_[0]{$on_timeout} = $_[1];
		760	};
		761
		762	*$timeout = sub {
441	my ($self, $timeout) = @_;	763	my ($self, $new_value) = @_;
442		764
443	$self->{timeout} = $timeout;	765	$self->{$timeout} = $new_value;
444	$self->_timeout;	766	delete $self->{$tw}; &$cb;
445	}	767	};
446		768
		769	*{"${dir}timeout_reset"} = sub {
		770	$_[0]{$activity} = AE::now;
		771	};
		772
		773	# main workhorse:
447	# reset the timeout watcher, as neccessary	774	# reset the timeout watcher, as neccessary
448	# also check for time-outs	775	# also check for time-outs
449	sub _timeout {	776	$cb = sub {
450	my ($self) = @_;	777	my ($self) = @_;
451		778
452	if ($self->{timeout}) {	779	if ($self->{$timeout} && $self->{fh}) {
453	my $NOW = AnyEvent->now;	780	my $NOW = AE::now;
454		781
455	# when would the timeout trigger?	782	# when would the timeout trigger?
456	my $after = $self->{_activity} + $self->{timeout} - $NOW;	783	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
457		784
458	# now or in the past already?	785	# now or in the past already?
459	if ($after <= 0) {	786	if ($after <= 0) {
460	$self->{_activity} = $NOW;	787	$self->{$activity} = $NOW;
461		788
462	if ($self->{on_timeout}) {	789	if ($self->{$on_timeout}) {
463	$self->{on_timeout}($self);	790	$self->{$on_timeout}($self);
464	} else {	791	} else {
465	$self->_error (&Errno::ETIMEDOUT);	792	$self->_error (Errno::ETIMEDOUT);
		793	}
		794
		795	# callback could have changed timeout value, optimise
		796	return unless $self->{$timeout};
		797
		798	# calculate new after
		799	$after = $self->{$timeout};
466	}	800	}
467		801
468	# callback could have changed timeout value, optimise	802	Scalar::Util::weaken $self;
469	return unless $self->{timeout};	803	return unless $self; # ->error could have destroyed $self
470		804
471	# calculate new after	805	$self->{$tw} ||= AE::timer $after, 0, sub {
472	$after = $self->{timeout};	806	delete $self->{$tw};
		807	$cb->($self);
		808	};
		809	} else {
		810	delete $self->{$tw};
473	}	811	}
474
475	Scalar::Util::weaken $self;
476	return unless $self; # ->error could have destroyed $self
477
478	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
479	delete $self->{_tw};
480	$self->_timeout;
481	});
482	} else {
483	delete $self->{_tw};
484	}	812	}
485	}	813	}
486		814
487	#############################################################################	815	#############################################################################
488		816
…		…
533	Scalar::Util::weaken $self;	861	Scalar::Util::weaken $self;
534		862
535	my $cb = sub {	863	my $cb = sub {
536	my $len = syswrite $self->{fh}, $self->{wbuf};	864	my $len = syswrite $self->{fh}, $self->{wbuf};
537		865
538	if ($len >= 0) {	866	if (defined $len) {
539	substr $self->{wbuf}, 0, $len, "";	867	substr $self->{wbuf}, 0, $len, "";
540		868
541	$self->{_activity} = AnyEvent->now;	869	$self->{_activity} = $self->{_wactivity} = AE::now;
542		870
543	$self->{on_drain}($self)	871	$self->{on_drain}($self)
544	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})	872	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
545	&& $self->{on_drain};	873	&& $self->{on_drain};
546		874
…		…
552		880
553	# try to write data immediately	881	# try to write data immediately
554	$cb->() unless $self->{autocork};	882	$cb->() unless $self->{autocork};
555		883
556	# if still data left in wbuf, we need to poll	884	# if still data left in wbuf, we need to poll
557	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	885	$self->{_ww} = AE::io $self->{fh}, 1, $cb
558	if length $self->{wbuf};	886	if length $self->{wbuf};
559	};	887	};
560	}	888	}
561		889
562	our %WH;	890	our %WH;
563		891
		892	# deprecated
564	sub register_write_type($$) {	893	sub register_write_type($$) {
565	$WH{$_[0]} = $_[1];	894	$WH{$_[0]} = $_[1];
566	}	895	}
567		896
568	sub push_write {	897	sub push_write {
569	my $self = shift;	898	my $self = shift;
570		899
571	if (@_ > 1) {	900	if (@_ > 1) {
572	my $type = shift;	901	my $type = shift;
573		902
		903	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
574	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	904	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
575	->($self, @_);	905	->($self, @_);
576	}	906	}
577		907
		908	# we downgrade here to avoid hard-to-track-down bugs,
		909	# and diagnose the problem earlier and better.
		910
578	if ($self->{tls}) {	911	if ($self->{tls}) {
579	$self->{_tls_wbuf} .= $_[0];	912	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
580		913	&_dotls ($self) if $self->{fh};
581	&_dotls ($self);
582	} else {	914	} else {
583	$self->{wbuf} .= $_[0];	915	utf8::downgrade $self->{wbuf} .= $_[0];
584	$self->_drain_wbuf;	916	$self->_drain_wbuf if $self->{fh};
585	}	917	}
586	}	918	}
587		919
588	=item $handle->push_write (type => @args)	920	=item $handle->push_write (type => @args)
589		921
590	Instead of formatting your data yourself, you can also let this module do	922	Instead of formatting your data yourself, you can also let this module
591	the job by specifying a type and type-specific arguments.	923	do the job by specifying a type and type-specific arguments. You
		924	can also specify the (fully qualified) name of a package, in which
		925	case AnyEvent tries to load the package and then expects to find the
		926	C<anyevent_read_type> function inside (see "custom write types", below).
592		927
593	Predefined types are (if you have ideas for additional types, feel free to	928	Predefined types are (if you have ideas for additional types, feel free to
594	drop by and tell us):	929	drop by and tell us):
595		930
596	=over 4	931	=over 4
…		…
653	Other languages could read single lines terminated by a newline and pass	988	Other languages could read single lines terminated by a newline and pass
654	this line into their JSON decoder of choice.	989	this line into their JSON decoder of choice.
655		990
656	=cut	991	=cut
657		992
		993	sub json_coder() {
		994	eval { require JSON::XS; JSON::XS->new->utf8 }
		995	|| do { require JSON; JSON->new->utf8 }
		996	}
		997
658	register_write_type json => sub {	998	register_write_type json => sub {
659	my ($self, $ref) = @_;	999	my ($self, $ref) = @_;
660		1000
661	require JSON;	1001	my $json = $self->{json} ||= json_coder;
662		1002
663	$self->{json} ? $self->{json}->encode ($ref)	1003	$json->encode ($ref)
664	: JSON::encode_json ($ref)
665	};	1004	};
666		1005
667	=item storable => $reference	1006	=item storable => $reference
668		1007
669	Freezes the given reference using L<Storable> and writes it to the	1008	Freezes the given reference using L<Storable> and writes it to the
…		…
683		1022
684	=item $handle->push_shutdown	1023	=item $handle->push_shutdown
685		1024
686	Sometimes you know you want to close the socket after writing your data	1025	Sometimes you know you want to close the socket after writing your data
687	before it was actually written. One way to do that is to replace your	1026	before it was actually written. One way to do that is to replace your
688	C<on_drain> handler by a callback that shuts down the socket. This method	1027	C<on_drain> handler by a callback that shuts down the socket (and set
689	is a shorthand for just that, and replaces the C<on_drain> callback with:	1028	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1029	replaces the C<on_drain> callback with:
690		1030
691	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown	1031	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
692		1032
693	This simply shuts down the write side and signals an EOF condition to the	1033	This simply shuts down the write side and signals an EOF condition to the
694	the peer.	1034	the peer.
…		…
697	afterwards. This is the cleanest way to close a connection.	1037	afterwards. This is the cleanest way to close a connection.
698		1038
699	=cut	1039	=cut
700		1040
701	sub push_shutdown {	1041	sub push_shutdown {
		1042	my ($self) = @_;
		1043
		1044	delete $self->{low_water_mark};
702	$_[0]->{on_drain} = sub { shutdown $_[0]{fh}, 1 };	1045	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
703	}	1046	}
704		1047
705	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1048	=item custom write types - Package::anyevent_write_type $handle, @args
706		1049
707	This function (not method) lets you add your own types to C<push_write>.	1050	Instead of one of the predefined types, you can also specify the name of
		1051	a package. AnyEvent will try to load the package and then expects to find
		1052	a function named C<anyevent_write_type> inside. If it isn't found, it
		1053	progressively tries to load the parent package until it either finds the
		1054	function (good) or runs out of packages (bad).
		1055
708	Whenever the given C<type> is used, C<push_write> will invoke the code	1056	Whenever the given C<type> is used, C<push_write> will the function with
709	reference with the handle object and the remaining arguments.	1057	the handle object and the remaining arguments.
710		1058
711	The code reference is supposed to return a single octet string that will	1059	The function is supposed to return a single octet string that will be
712	be appended to the write buffer.	1060	appended to the write buffer, so you cna mentally treat this function as a
		1061	"arguments to on-the-wire-format" converter.
713		1062
714	Note that this is a function, and all types registered this way will be	1063	Example: implement a custom write type C<join> that joins the remaining
715	global, so try to use unique names.	1064	arguments using the first one.
		1065
		1066	$handle->push_write (My::Type => " ", 1,2,3);
		1067
		1068	# uses the following package, which can be defined in the "My::Type" or in
		1069	# the "My" modules to be auto-loaded, or just about anywhere when the
		1070	# My::Type::anyevent_write_type is defined before invoking it.
		1071
		1072	package My::Type;
		1073
		1074	sub anyevent_write_type {
		1075	my ($handle, $delim, @args) = @_;
		1076
		1077	join $delim, @args
		1078	}
716		1079
717	=cut	1080	=cut
718		1081
719	#############################################################################	1082	#############################################################################
720		1083
…		…
802	=cut	1165	=cut
803		1166
804	sub _drain_rbuf {	1167	sub _drain_rbuf {
805	my ($self) = @_;	1168	my ($self) = @_;
806		1169
		1170	# avoid recursion
		1171	return if $self->{_skip_drain_rbuf};
807	local $self->{_in_drain} = 1;	1172	local $self->{_skip_drain_rbuf} = 1;
808
809	if (
810	defined $self->{rbuf_max}
811	&& $self->{rbuf_max} < length $self->{rbuf}
812	) {
813	$self->_error (&Errno::ENOSPC, 1), return;
814	}
815		1173
816	while () {	1174	while () {
817	# we need to use a separate tls read buffer, as we must not receive data while	1175	# we need to use a separate tls read buffer, as we must not receive data while
818	# we are draining the buffer, and this can only happen with TLS.	1176	# we are draining the buffer, and this can only happen with TLS.
819	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};	1177	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1178	if exists $self->{_tls_rbuf};
820		1179
821	my $len = length $self->{rbuf};	1180	my $len = length $self->{rbuf};
822		1181
823	if (my $cb = shift @{ $self->{_queue} }) {	1182	if (my $cb = shift @{ $self->{_queue} }) {
824	unless ($cb->($self)) {	1183	unless ($cb->($self)) {
825	if ($self->{_eof}) {	1184	# no progress can be made
826	# no progress can be made (not enough data and no data forthcoming)	1185	# (not enough data and no data forthcoming)
827	$self->_error (&Errno::EPIPE, 1), return;	1186	$self->_error (Errno::EPIPE, 1), return
828	}	1187	if $self->{_eof};
829		1188
830	unshift @{ $self->{_queue} }, $cb;	1189	unshift @{ $self->{_queue} }, $cb;
831	last;	1190	last;
832	}	1191	}
833	} elsif ($self->{on_read}) {	1192	} elsif ($self->{on_read}) {
…		…
840	&& !@{ $self->{_queue} } # and the queue is still empty	1199	&& !@{ $self->{_queue} } # and the queue is still empty
841	&& $self->{on_read} # but we still have on_read	1200	&& $self->{on_read} # but we still have on_read
842	) {	1201	) {
843	# no further data will arrive	1202	# no further data will arrive
844	# so no progress can be made	1203	# so no progress can be made
845	$self->_error (&Errno::EPIPE, 1), return	1204	$self->_error (Errno::EPIPE, 1), return
846	if $self->{_eof};	1205	if $self->{_eof};
847		1206
848	last; # more data might arrive	1207	last; # more data might arrive
849	}	1208	}
850	} else {	1209	} else {
…		…
853	last;	1212	last;
854	}	1213	}
855	}	1214	}
856		1215
857	if ($self->{_eof}) {	1216	if ($self->{_eof}) {
858	if ($self->{on_eof}) {	1217	$self->{on_eof}
859	$self->{on_eof}($self)	1218	? $self->{on_eof}($self)
860	} else {
861	$self->_error (0, 1, "Unexpected end-of-file");	1219	: $self->_error (0, 1, "Unexpected end-of-file");
862	}	1220
		1221	return;
		1222	}
		1223
		1224	if (
		1225	defined $self->{rbuf_max}
		1226	&& $self->{rbuf_max} < length $self->{rbuf}
		1227	) {
		1228	$self->_error (Errno::ENOSPC, 1), return;
863	}	1229	}
864		1230
865	# may need to restart read watcher	1231	# may need to restart read watcher
866	unless ($self->{_rw}) {	1232	unless ($self->{_rw}) {
867	$self->start_read	1233	$self->start_read
…		…
879		1245
880	sub on_read {	1246	sub on_read {
881	my ($self, $cb) = @_;	1247	my ($self, $cb) = @_;
882		1248
883	$self->{on_read} = $cb;	1249	$self->{on_read} = $cb;
884	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1250	$self->_drain_rbuf if $cb;
885	}	1251	}
886		1252
887	=item $handle->rbuf	1253	=item $handle->rbuf
888		1254
889	Returns the read buffer (as a modifiable lvalue).	1255	Returns the read buffer (as a modifiable lvalue).
…		…
936	my $cb = pop;	1302	my $cb = pop;
937		1303
938	if (@_) {	1304	if (@_) {
939	my $type = shift;	1305	my $type = shift;
940		1306
		1307	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
941	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1308	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
942	->($self, $cb, @_);	1309	->($self, $cb, @_);
943	}	1310	}
944		1311
945	push @{ $self->{_queue} }, $cb;	1312	push @{ $self->{_queue} }, $cb;
946	$self->_drain_rbuf unless $self->{_in_drain};	1313	$self->_drain_rbuf;
947	}	1314	}
948		1315
949	sub unshift_read {	1316	sub unshift_read {
950	my $self = shift;	1317	my $self = shift;
951	my $cb = pop;	1318	my $cb = pop;
…		…
955		1322
956	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1323	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
957	->($self, $cb, @_);	1324	->($self, $cb, @_);
958	}	1325	}
959		1326
960
961	unshift @{ $self->{_queue} }, $cb;	1327	unshift @{ $self->{_queue} }, $cb;
962	$self->_drain_rbuf unless $self->{_in_drain};	1328	$self->_drain_rbuf;
963	}	1329	}
964		1330
965	=item $handle->push_read (type => @args, $cb)	1331	=item $handle->push_read (type => @args, $cb)
966		1332
967	=item $handle->unshift_read (type => @args, $cb)	1333	=item $handle->unshift_read (type => @args, $cb)
968		1334
969	Instead of providing a callback that parses the data itself you can chose	1335	Instead of providing a callback that parses the data itself you can chose
970	between a number of predefined parsing formats, for chunks of data, lines	1336	between a number of predefined parsing formats, for chunks of data, lines
971	etc.	1337	etc. You can also specify the (fully qualified) name of a package, in
		1338	which case AnyEvent tries to load the package and then expects to find the
		1339	C<anyevent_read_type> function inside (see "custom read types", below).
972		1340
973	Predefined types are (if you have ideas for additional types, feel free to	1341	Predefined types are (if you have ideas for additional types, feel free to
974	drop by and tell us):	1342	drop by and tell us):
975		1343
976	=over 4	1344	=over 4
…		…
1100	return 1;	1468	return 1;
1101	}	1469	}
1102		1470
1103	# reject	1471	# reject
1104	if ($reject && $$rbuf =~ $reject) {	1472	if ($reject && $$rbuf =~ $reject) {
1105	$self->_error (&Errno::EBADMSG);	1473	$self->_error (Errno::EBADMSG);
1106	}	1474	}
1107		1475
1108	# skip	1476	# skip
1109	if ($skip && $$rbuf =~ $skip) {	1477	if ($skip && $$rbuf =~ $skip) {
1110	$data .= substr $$rbuf, 0, $+[0], "";	1478	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1126	my ($self, $cb) = @_;	1494	my ($self, $cb) = @_;
1127		1495
1128	sub {	1496	sub {
1129	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1497	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1130	if ($_[0]{rbuf} =~ /[^0-9]/) {	1498	if ($_[0]{rbuf} =~ /[^0-9]/) {
1131	$self->_error (&Errno::EBADMSG);	1499	$self->_error (Errno::EBADMSG);
1132	}	1500	}
1133	return;	1501	return;
1134	}	1502	}
1135		1503
1136	my $len = $1;	1504	my $len = $1;
…		…
1139	my $string = $_[1];	1507	my $string = $_[1];
1140	$_[0]->unshift_read (chunk => 1, sub {	1508	$_[0]->unshift_read (chunk => 1, sub {
1141	if ($_[1] eq ",") {	1509	if ($_[1] eq ",") {
1142	$cb->($_[0], $string);	1510	$cb->($_[0], $string);
1143	} else {	1511	} else {
1144	$self->_error (&Errno::EBADMSG);	1512	$self->_error (Errno::EBADMSG);
1145	}	1513	}
1146	});	1514	});
1147	});	1515	});
1148		1516
1149	1	1517	1
…		…
1216	=cut	1584	=cut
1217		1585
1218	register_read_type json => sub {	1586	register_read_type json => sub {
1219	my ($self, $cb) = @_;	1587	my ($self, $cb) = @_;
1220		1588
1221	my $json = $self->{json} ||=	1589	my $json = $self->{json} ||= json_coder;
1222	eval { require JSON::XS; JSON::XS->new->utf8 }
1223	|| do { require JSON; JSON->new->utf8 };
1224		1590
1225	my $data;	1591	my $data;
1226	my $rbuf = \$self->{rbuf};	1592	my $rbuf = \$self->{rbuf};
1227		1593
1228	sub {	1594	sub {
…		…
1239	$json->incr_skip;	1605	$json->incr_skip;
1240		1606
1241	$self->{rbuf} = $json->incr_text;	1607	$self->{rbuf} = $json->incr_text;
1242	$json->incr_text = "";	1608	$json->incr_text = "";
1243		1609
1244	$self->_error (&Errno::EBADMSG);	1610	$self->_error (Errno::EBADMSG);
1245		1611
1246	()	1612	()
1247	} else {	1613	} else {
1248	$self->{rbuf} = "";	1614	$self->{rbuf} = "";
1249		1615
…		…
1286	# read remaining chunk	1652	# read remaining chunk
1287	$_[0]->unshift_read (chunk => $len, sub {	1653	$_[0]->unshift_read (chunk => $len, sub {
1288	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1654	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1289	$cb->($_[0], $ref);	1655	$cb->($_[0], $ref);
1290	} else {	1656	} else {
1291	$self->_error (&Errno::EBADMSG);	1657	$self->_error (Errno::EBADMSG);
1292	}	1658	}
1293	});	1659	});
1294	}	1660	}
1295		1661
1296	1	1662	1
1297	}	1663	}
1298	};	1664	};
1299		1665
1300	=back	1666	=back
1301		1667
1302	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1668	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1303		1669
1304	This function (not method) lets you add your own types to C<push_read>.	1670	Instead of one of the predefined types, you can also specify the name
		1671	of a package. AnyEvent will try to load the package and then expects to
		1672	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1673	progressively tries to load the parent package until it either finds the
		1674	function (good) or runs out of packages (bad).
1305		1675
1306	Whenever the given C<type> is used, C<push_read> will invoke the code	1676	Whenever this type is used, C<push_read> will invoke the function with the
1307	reference with the handle object, the callback and the remaining	1677	handle object, the original callback and the remaining arguments.
1308	arguments.
1309		1678
1310	The code reference is supposed to return a callback (usually a closure)	1679	The function is supposed to return a callback (usually a closure) that
1311	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1680	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1681	mentally treat the function as a "configurable read type to read callback"
		1682	converter.
1312		1683
1313	It should invoke the passed callback when it is done reading (remember to	1684	It should invoke the original callback when it is done reading (remember
1314	pass C<$handle> as first argument as all other callbacks do that).	1685	to pass C<$handle> as first argument as all other callbacks do that,
		1686	although there is no strict requirement on this).
1315		1687
1316	Note that this is a function, and all types registered this way will be
1317	global, so try to use unique names.
1318
1319	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1688	For examples, see the source of this module (F<perldoc -m
1320	search for C<register_read_type>)).	1689	AnyEvent::Handle>, search for C<register_read_type>)).
1321		1690
1322	=item $handle->stop_read	1691	=item $handle->stop_read
1323		1692
1324	=item $handle->start_read	1693	=item $handle->start_read
1325		1694
…		…
1345	}	1714	}
1346		1715
1347	sub start_read {	1716	sub start_read {
1348	my ($self) = @_;	1717	my ($self) = @_;
1349		1718
1350	unless ($self->{_rw} || $self->{_eof}) {	1719	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1351	Scalar::Util::weaken $self;	1720	Scalar::Util::weaken $self;
1352		1721
1353	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1722	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1354	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});	1723	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1355	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1724	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1356		1725
1357	if ($len > 0) {	1726	if ($len > 0) {
1358	$self->{_activity} = AnyEvent->now;	1727	$self->{_activity} = $self->{_ractivity} = AE::now;
1359		1728
1360	if ($self->{tls}) {	1729	if ($self->{tls}) {
1361	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);	1730	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1362		1731
1363	&_dotls ($self);	1732	&_dotls ($self);
1364	} else {	1733	} else {
1365	$self->_drain_rbuf unless $self->{_in_drain};	1734	$self->_drain_rbuf;
1366	}	1735	}
1367		1736
1368	} elsif (defined $len) {	1737	} elsif (defined $len) {
1369	delete $self->{_rw};	1738	delete $self->{_rw};
1370	$self->{_eof} = 1;	1739	$self->{_eof} = 1;
1371	$self->_drain_rbuf unless $self->{_in_drain};	1740	$self->_drain_rbuf;
1372		1741
1373	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1742	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1374	return $self->_error ($!, 1);	1743	return $self->_error ($!, 1);
1375	}	1744	}
1376	});	1745	};
1377	}	1746	}
1378	}	1747	}
1379		1748
1380	our $ERROR_SYSCALL;	1749	our $ERROR_SYSCALL;
1381	our $ERROR_WANT_READ;	1750	our $ERROR_WANT_READ;
1382	our $ERROR_ZERO_RETURN;
1383		1751
1384	sub _tls_error {	1752	sub _tls_error {
1385	my ($self, $err) = @_;	1753	my ($self, $err) = @_;
1386		1754
1387	return $self->_error ($!, 1)	1755	return $self->_error ($!, 1)
…		…
1390	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());	1758	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
1391		1759
1392	# reduce error string to look less scary	1760	# reduce error string to look less scary
1393	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;	1761	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
1394		1762
		1763	if ($self->{_on_starttls}) {
		1764	(delete $self->{_on_starttls})->($self, undef, $err);
		1765	&_freetls;
		1766	} else {
		1767	&_freetls;
1395	$self->_error (&Errno::EPROTO, 1, $err);	1768	$self->_error (Errno::EPROTO, 1, $err);
		1769	}
1396	}	1770	}
1397		1771
1398	# poll the write BIO and send the data if applicable	1772	# poll the write BIO and send the data if applicable
1399	# also decode read data if possible	1773	# also decode read data if possible
1400	# this is basiclaly our TLS state machine	1774	# this is basiclaly our TLS state machine
…		…
1411	}	1785	}
1412		1786
1413	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);	1787	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
1414	return $self->_tls_error ($tmp)	1788	return $self->_tls_error ($tmp)
1415	if $tmp != $ERROR_WANT_READ	1789	if $tmp != $ERROR_WANT_READ
1416	&& ($tmp != $ERROR_SYSCALL || $!)	1790	&& ($tmp != $ERROR_SYSCALL || $!);
1417	&& $tmp != $ERROR_ZERO_RETURN;
1418	}	1791	}
1419		1792
1420	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {	1793	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1421	unless (length $tmp) {	1794	unless (length $tmp) {
1422	# let's treat SSL-eof as we treat normal EOF	1795	$self->{_on_starttls}
1423	delete $self->{_rw};	1796	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
1424	$self->{_eof} = 1;
1425	&_freetls;	1797	&_freetls;
		1798
		1799	if ($self->{on_stoptls}) {
		1800	$self->{on_stoptls}($self);
		1801	return;
		1802	} else {
		1803	# let's treat SSL-eof as we treat normal EOF
		1804	delete $self->{_rw};
		1805	$self->{_eof} = 1;
		1806	}
1426	}	1807	}
1427		1808
1428	$self->{_tls_rbuf} .= $tmp;	1809	$self->{_tls_rbuf} .= $tmp;
1429	$self->_drain_rbuf unless $self->{_in_drain};	1810	$self->_drain_rbuf;
1430	$self->{tls} or return; # tls session might have gone away in callback	1811	$self->{tls} or return; # tls session might have gone away in callback
1431	}	1812	}
1432		1813
1433	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);	1814	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1434	return $self->_tls_error ($tmp)	1815	return $self->_tls_error ($tmp)
1435	if $tmp != $ERROR_WANT_READ	1816	if $tmp != $ERROR_WANT_READ
1436	&& ($tmp != $ERROR_SYSCALL || $!)	1817	&& ($tmp != $ERROR_SYSCALL || $!);
1437	&& $tmp != $ERROR_ZERO_RETURN;
1438		1818
1439	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1819	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1440	$self->{wbuf} .= $tmp;	1820	$self->{wbuf} .= $tmp;
1441	$self->_drain_wbuf;	1821	$self->_drain_wbuf;
		1822	$self->{tls} or return; # tls session might have gone away in callback
1442	}	1823	}
		1824
		1825	$self->{_on_starttls}
		1826	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
		1827	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1443	}	1828	}
1444		1829
1445	=item $handle->starttls ($tls[, $tls_ctx])	1830	=item $handle->starttls ($tls[, $tls_ctx])
1446		1831
1447	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1832	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1448	object is created, you can also do that at a later time by calling	1833	object is created, you can also do that at a later time by calling
1449	C<starttls>.	1834	C<starttls>.
		1835
		1836	Starting TLS is currently an asynchronous operation - when you push some
		1837	write data and then call C<< ->starttls >> then TLS negotiation will start
		1838	immediately, after which the queued write data is then sent.
1450		1839
1451	The first argument is the same as the C<tls> constructor argument (either	1840	The first argument is the same as the C<tls> constructor argument (either
1452	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1841	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1453		1842
1454	The second argument is the optional C<AnyEvent::TLS> object that is used	1843	The second argument is the optional C<AnyEvent::TLS> object that is used
…		…
1459	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS	1848	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1460	context in C<< $handle->{tls_ctx} >> after this call and can be used or	1849	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1461	changed to your liking. Note that the handshake might have already started	1850	changed to your liking. Note that the handshake might have already started
1462	when this function returns.	1851	when this function returns.
1463		1852
1464	If it an error to start a TLS handshake more than once per	1853	Due to bugs in OpenSSL, it might or might not be possible to do multiple
1465	AnyEvent::Handle object (this is due to bugs in OpenSSL).	1854	handshakes on the same stream. Best do not attempt to use the stream after
		1855	stopping TLS.
1466		1856
1467	=cut	1857	=cut
1468		1858
1469	our %TLS_CACHE; #TODO not yet documented, should we?	1859	our %TLS_CACHE; #TODO not yet documented, should we?
1470		1860
1471	sub starttls {	1861	sub starttls {
1472	my ($self, $ssl, $ctx) = @_;	1862	my ($self, $tls, $ctx) = @_;
		1863
		1864	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1865	if $self->{tls};
		1866
		1867	$self->{tls} = $tls;
		1868	$self->{tls_ctx} = $ctx if @_ > 2;
		1869
		1870	return unless $self->{fh};
1473		1871
1474	require Net::SSLeay;	1872	require Net::SSLeay;
1475		1873
1476	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"
1477	if $self->{tls};
1478
1479	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();	1874	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1480	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();	1875	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
1481	$ERROR_ZERO_RETURN = Net::SSLeay::ERROR_ZERO_RETURN ();
1482		1876
		1877	$tls = delete $self->{tls};
1483	$ctx ||= $self->{tls_ctx};	1878	$ctx = $self->{tls_ctx};
		1879
		1880	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
1484		1881
1485	if ("HASH" eq ref $ctx) {	1882	if ("HASH" eq ref $ctx) {
1486	require AnyEvent::TLS;	1883	require AnyEvent::TLS;
1487
1488	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context
1489		1884
1490	if ($ctx->{cache}) {	1885	if ($ctx->{cache}) {
1491	my $key = $ctx+0;	1886	my $key = $ctx+0;
1492	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;	1887	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
1493	} else {	1888	} else {
1494	$ctx = new AnyEvent::TLS %$ctx;	1889	$ctx = new AnyEvent::TLS %$ctx;
1495	}	1890	}
1496	}	1891	}
1497		1892
1498	$self->{tls_ctx} = $ctx || TLS_CTX ();	1893	$self->{tls_ctx} = $ctx || TLS_CTX ();
1499	$self->{tls} = $ssl = $self->{tls_ctx}->_get_session ($ssl, $self, $self->{peername});	1894	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1500		1895
1501	# basically, this is deep magic (because SSL_read should have the same issues)	1896	# basically, this is deep magic (because SSL_read should have the same issues)
1502	# but the openssl maintainers basically said: "trust us, it just works".	1897	# but the openssl maintainers basically said: "trust us, it just works".
1503	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1898	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1504	# and mismaintained ssleay-module doesn't even offer them).	1899	# and mismaintained ssleay-module doesn't even offer them).
…		…
1511	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to	1906	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
1512	# have identity issues in that area.	1907	# have identity issues in that area.
1513	# Net::SSLeay::CTX_set_mode ($ssl,	1908	# Net::SSLeay::CTX_set_mode ($ssl,
1514	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1909	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1515	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1910	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
1516	Net::SSLeay::CTX_set_mode ($ssl, 1|2);	1911	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1517		1912
1518	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1913	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1519	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1914	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1520		1915
		1916	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1917
1521	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1918	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
		1919
		1920	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
		1921	if $self->{on_starttls};
1522		1922
1523	&_dotls; # need to trigger the initial handshake	1923	&_dotls; # need to trigger the initial handshake
1524	$self->start_read; # make sure we actually do read	1924	$self->start_read; # make sure we actually do read
1525	}	1925	}
1526		1926
1527	=item $handle->stoptls	1927	=item $handle->stoptls
1528		1928
1529	Shuts down the SSL connection - this makes a proper EOF handshake by	1929	Shuts down the SSL connection - this makes a proper EOF handshake by
1530	sending a close notify to the other side, but since OpenSSL doesn't	1930	sending a close notify to the other side, but since OpenSSL doesn't
1531	support non-blocking shut downs, it is not possible to re-use the stream	1931	support non-blocking shut downs, it is not guaranteed that you can re-use
1532	afterwards.	1932	the stream afterwards.
1533		1933
1534	=cut	1934	=cut
1535		1935
1536	sub stoptls {	1936	sub stoptls {
1537	my ($self) = @_;	1937	my ($self) = @_;
1538		1938
1539	if ($self->{tls}) {	1939	if ($self->{tls} && $self->{fh}) {
1540	Net::SSLeay::shutdown ($self->{tls});	1940	Net::SSLeay::shutdown ($self->{tls});
1541		1941
1542	&_dotls;	1942	&_dotls;
1543		1943
1544	# we don't give a shit. no, we do, but we can't. no...	1944	# # we don't give a shit. no, we do, but we can't. no...#d#
1545	# we, we... have to use openssl :/	1945	# # we, we... have to use openssl :/#d#
1546	&_freetls;	1946	# &_freetls;#d#
1547	}	1947	}
1548	}	1948	}
1549		1949
1550	sub _freetls {	1950	sub _freetls {
1551	my ($self) = @_;	1951	my ($self) = @_;
1552		1952
1553	return unless $self->{tls};	1953	return unless $self->{tls};
1554		1954
1555	$self->{tls_ctx}->_put_session (delete $self->{tls});	1955	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1956	if $self->{tls} > 0;
1556		1957
1557	delete @$self{qw(_rbio _wbio _tls_wbuf)};	1958	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1558	}	1959	}
1559		1960
1560	sub DESTROY {	1961	sub DESTROY {
1561	my ($self) = @_;	1962	my ($self) = @_;
1562		1963
1563	&_freetls;	1964	&_freetls;
1564		1965
1565	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1966	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1566		1967
1567	if ($linger && length $self->{wbuf}) {	1968	if ($linger && length $self->{wbuf} && $self->{fh}) {
1568	my $fh = delete $self->{fh};	1969	my $fh = delete $self->{fh};
1569	my $wbuf = delete $self->{wbuf};	1970	my $wbuf = delete $self->{wbuf};
1570		1971
1571	my @linger;	1972	my @linger;
1572		1973
1573	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	1974	push @linger, AE::io $fh, 1, sub {
1574	my $len = syswrite $fh, $wbuf, length $wbuf;	1975	my $len = syswrite $fh, $wbuf, length $wbuf;
1575		1976
1576	if ($len > 0) {	1977	if ($len > 0) {
1577	substr $wbuf, 0, $len, "";	1978	substr $wbuf, 0, $len, "";
1578	} else {	1979	} else {
1579	@linger = (); # end	1980	@linger = (); # end
1580	}	1981	}
1581	});	1982	};
1582	push @linger, AnyEvent->timer (after => $linger, cb => sub {	1983	push @linger, AE::timer $linger, 0, sub {
1583	@linger = ();	1984	@linger = ();
1584	});	1985	};
1585	}	1986	}
1586	}	1987	}
1587		1988
1588	=item $handle->destroy	1989	=item $handle->destroy
1589		1990
1590	Shuts down the handle object as much as possible - this call ensures that	1991	Shuts down the handle object as much as possible - this call ensures that
1591	no further callbacks will be invoked and resources will be freed as much	1992	no further callbacks will be invoked and as many resources as possible
1592	as possible. You must not call any methods on the object afterwards.	1993	will be freed. Any method you will call on the handle object after
		1994	destroying it in this way will be silently ignored (and it will return the
		1995	empty list).
1593		1996
1594	Normally, you can just "forget" any references to an AnyEvent::Handle	1997	Normally, you can just "forget" any references to an AnyEvent::Handle
1595	object and it will simply shut down. This works in fatal error and EOF	1998	object and it will simply shut down. This works in fatal error and EOF
1596	callbacks, as well as code outside. It does I<NOT> work in a read or write	1999	callbacks, as well as code outside. It does I<NOT> work in a read or write
1597	callback, so when you want to destroy the AnyEvent::Handle object from	2000	callback, so when you want to destroy the AnyEvent::Handle object from
1598	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in	2001	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
1599	that case.	2002	that case.
1600		2003
		2004	Destroying the handle object in this way has the advantage that callbacks
		2005	will be removed as well, so if those are the only reference holders (as
		2006	is common), then one doesn't need to do anything special to break any
		2007	reference cycles.
		2008
1601	The handle might still linger in the background and write out remaining	2009	The handle might still linger in the background and write out remaining
1602	data, as specified by the C<linger> option, however.	2010	data, as specified by the C<linger> option, however.
1603		2011
1604	=cut	2012	=cut
1605		2013
1606	sub destroy {	2014	sub destroy {
1607	my ($self) = @_;	2015	my ($self) = @_;
1608		2016
1609	$self->DESTROY;	2017	$self->DESTROY;
1610	%$self = ();	2018	%$self = ();
		2019	bless $self, "AnyEvent::Handle::destroyed";
1611	}	2020	}
		2021
		2022	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2023	#nop
		2024	}
		2025
		2026	=item $handle->destroyed
		2027
		2028	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2029	->destroy >>, true otherwise.
		2030
		2031	Can be useful to decide whether the handle is still valid after some
		2032	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2033	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2034	can destroy the handle, so work can be avoided by checking sometimes:
		2035
		2036	$hdl->starttls ("accept");
		2037	return if $hdl->destroyed;
		2038	$hdl->push_write (...
		2039
		2040	Note that the call to C<push_write> will silently be ignored if the handle
		2041	has been destroyed, so often you can just ignore the possibility of the
		2042	handle being destroyed.
		2043
		2044	=cut
		2045
		2046	sub destroyed { 0 }
		2047	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1612		2048
1613	=item AnyEvent::Handle::TLS_CTX	2049	=item AnyEvent::Handle::TLS_CTX
1614		2050
1615	This function creates and returns the AnyEvent::TLS object used by default	2051	This function creates and returns the AnyEvent::TLS object used by default
1616	for TLS mode.	2052	for TLS mode.
…		…
1672		2108
1673	$handle->on_read (sub { });	2109	$handle->on_read (sub { });
1674	$handle->on_eof (undef);	2110	$handle->on_eof (undef);
1675	$handle->on_error (sub {	2111	$handle->on_error (sub {
1676	my $data = delete $_[0]{rbuf};	2112	my $data = delete $_[0]{rbuf};
1677	undef $handle;
1678	});	2113	});
1679		2114
1680	The reason to use C<on_error> is that TCP connections, due to latencies	2115	The reason to use C<on_error> is that TCP connections, due to latencies
1681	and packets loss, might get closed quite violently with an error, when in	2116	and packets loss, might get closed quite violently with an error, when in
1682	fact, all data has been received.	2117	fact, all data has been received.
…		…
1698	$handle->on_drain (sub {	2133	$handle->on_drain (sub {
1699	warn "all data submitted to the kernel\n";	2134	warn "all data submitted to the kernel\n";
1700	undef $handle;	2135	undef $handle;
1701	});	2136	});
1702		2137
		2138	If you just want to queue some data and then signal EOF to the other side,
		2139	consider using C<< ->push_shutdown >> instead.
		2140
		2141	=item I want to contact a TLS/SSL server, I don't care about security.
		2142
		2143	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2144	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		2145	parameter:
		2146
		2147	tcp_connect $host, $port, sub {
		2148	my ($fh) = @_;
		2149
		2150	my $handle = new AnyEvent::Handle
		2151	fh => $fh,
		2152	tls => "connect",
		2153	on_error => sub { ... };
		2154
		2155	$handle->push_write (...);
		2156	};
		2157
		2158	=item I want to contact a TLS/SSL server, I do care about security.
		2159
		2160	Then you should additionally enable certificate verification, including
		2161	peername verification, if the protocol you use supports it (see
		2162	L<AnyEvent::TLS>, C<verify_peername>).
		2163
		2164	E.g. for HTTPS:
		2165
		2166	tcp_connect $host, $port, sub {
		2167	my ($fh) = @_;
		2168
		2169	my $handle = new AnyEvent::Handle
		2170	fh => $fh,
		2171	peername => $host,
		2172	tls => "connect",
		2173	tls_ctx => { verify => 1, verify_peername => "https" },
		2174	...
		2175
		2176	Note that you must specify the hostname you connected to (or whatever
		2177	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2178	peername verification will be done.
		2179
		2180	The above will use the system-dependent default set of trusted CA
		2181	certificates. If you want to check against a specific CA, add the
		2182	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2183
		2184	tls_ctx => {
		2185	verify => 1,
		2186	verify_peername => "https",
		2187	ca_file => "my-ca-cert.pem",
		2188	},
		2189
		2190	=item I want to create a TLS/SSL server, how do I do that?
		2191
		2192	Well, you first need to get a server certificate and key. You have
		2193	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2194	self-signed certificate (cheap. check the search engine of your choice,
		2195	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2196	nice program for that purpose).
		2197
		2198	Then create a file with your private key (in PEM format, see
		2199	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2200	file should then look like this:
		2201
		2202	-----BEGIN RSA PRIVATE KEY-----
		2203	...header data
		2204	... lots of base64'y-stuff
		2205	-----END RSA PRIVATE KEY-----
		2206
		2207	-----BEGIN CERTIFICATE-----
		2208	... lots of base64'y-stuff
		2209	-----END CERTIFICATE-----
		2210
		2211	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2212	specify this file as C<cert_file>:
		2213
		2214	tcp_server undef, $port, sub {
		2215	my ($fh) = @_;
		2216
		2217	my $handle = new AnyEvent::Handle
		2218	fh => $fh,
		2219	tls => "accept",
		2220	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2221	...
		2222
		2223	When you have intermediate CA certificates that your clients might not
		2224	know about, just append them to the C<cert_file>.
		2225
1703	=back	2226	=back
1704		2227
1705		2228
1706	=head1 SUBCLASSING AnyEvent::Handle	2229	=head1 SUBCLASSING AnyEvent::Handle
1707		2230

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines