ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.50 by root, Fri May 30 21:38:46 2008 UTC vs.
Revision 1.196 by root, Tue Jun 8 10:04:17 2010 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.1;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes or other stream things).
52	on sockets see L<AnyEvent::Util>.	37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
53		40
54	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
57		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
58	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
59	argument.	49	argument.
60		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
61	=head1 METHODS	80	=head1 METHODS
62		81
63	=over 4	82	=over 4
64		83
65	=item B<new (%args)>	84	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
66		85
67	The constructor supports these arguments (all as key => value pairs).	86	The constructor supports these arguments (all as C<< key => value >> pairs).
68		87
69	=over 4	88	=over 4
70		89
71	=item fh => $filehandle [MANDATORY]	90	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		91
73	The filehandle this L<AnyEvent::Handle> object will operate on.	92	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	93	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	94	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		95	that mode.
77		96
78	=item on_eof => $cb->($handle)	97	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
79		98
80	Set the callback to be called on EOF.	99	Try to connect to the specified host and service (port), using
		100	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		101	default C<peername>.
81		102
82	While not mandatory, it is highly recommended to set an eof callback,	103	You have to specify either this parameter, or C<fh>, above.
83	otherwise you might end up with a closed socket while you are still
84	waiting for data.
85		104
		105	It is possible to push requests on the read and write queues, and modify
		106	properties of the stream, even while AnyEvent::Handle is connecting.
		107
		108	When this parameter is specified, then the C<on_prepare>,
		109	C<on_connect_error> and C<on_connect> callbacks will be called under the
		110	appropriate circumstances:
		111
		112	=over 4
		113
86	=item on_error => $cb->($handle)	114	=item on_prepare => $cb->($handle)
87		115
		116	This (rarely used) callback is called before a new connection is
		117	attempted, but after the file handle has been created. It could be used to
		118	prepare the file handle with parameters required for the actual connect
		119	(as opposed to settings that can be changed when the connection is already
		120	established).
		121
		122	The return value of this callback should be the connect timeout value in
		123	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
		124	timeout is to be used).
		125
		126	=item on_connect => $cb->($handle, $host, $port, $retry->())
		127
		128	This callback is called when a connection has been successfully established.
		129
		130	The actual numeric host and port (the socket peername) are passed as
		131	parameters, together with a retry callback.
		132
		133	When, for some reason, the handle is not acceptable, then calling
		134	C<$retry> will continue with the next connection target (in case of
		135	multi-homed hosts or SRV records there can be multiple connection
		136	endpoints). At the time it is called the read and write queues, eof
		137	status, tls status and similar properties of the handle will have been
		138	reset.
		139
		140	In most cases, ignoring the C<$retry> parameter is the way to go.
		141
		142	=item on_connect_error => $cb->($handle, $message)
		143
		144	This callback is called when the connection could not be
		145	established. C<$!> will contain the relevant error code, and C<$message> a
		146	message describing it (usually the same as C<"$!">).
		147
		148	If this callback isn't specified, then C<on_error> will be called with a
		149	fatal error instead.
		150
		151	=back
		152
		153	=item on_error => $cb->($handle, $fatal, $message)
		154
88	This is the fatal error callback, that is called when, well, a fatal error	155	This is the error callback, which is called when, well, some error
89	occurs, such as not being able to resolve the hostname, failure to connect	156	occured, such as not being able to resolve the hostname, failure to
90	or a read error.	157	connect or a read error.
91		158
92	The object will not be in a usable state when this callback has been	159	Some errors are fatal (which is indicated by C<$fatal> being true). On
93	called.	160	fatal errors the handle object will be destroyed (by a call to C<< ->
		161	destroy >>) after invoking the error callback (which means you are free to
		162	examine the handle object). Examples of fatal errors are an EOF condition
		163	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		164	cases where the other side can close the connection at their will it is
		165	often easiest to not report C<EPIPE> errors in this callback.
		166
		167	AnyEvent::Handle tries to find an appropriate error code for you to check
		168	against, but in some cases (TLS errors), this does not work well. It is
		169	recommended to always output the C<$message> argument in human-readable
		170	error messages (it's usually the same as C<"$!">).
		171
		172	Non-fatal errors can be retried by simply returning, but it is recommended
		173	to simply ignore this parameter and instead abondon the handle object
		174	when this callback is invoked. Examples of non-fatal errors are timeouts
		175	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
94		176
95	On callback entrance, the value of C<$!> contains the operating system	177	On callback entrance, the value of C<$!> contains the operating system
96	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	178	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
97		179	C<EPROTO>).
98	The callback should throw an exception. If it returns, then
99	AnyEvent::Handle will C<croak> for you.
100		180
101	While not mandatory, it is I<highly> recommended to set this callback, as	181	While not mandatory, it is I<highly> recommended to set this callback, as
102	you will not be notified of errors otherwise. The default simply calls	182	you will not be notified of errors otherwise. The default simply calls
103	die.	183	C<croak>.
104		184
105	=item on_read => $cb->($handle)	185	=item on_read => $cb->($handle)
106		186
107	This sets the default read callback, which is called when data arrives	187	This sets the default read callback, which is called when data arrives
108	and no read request is in the queue.	188	and no read request is in the queue (unlike read queue callbacks, this
		189	callback will only be called when at least one octet of data is in the
		190	read buffer).
109		191
110	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	192	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
111	method or access the C<$handle->{rbuf}> member directly.	193	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		194	must not enlarge or modify the read buffer, you can only remove data at
		195	the beginning from it.
112		196
113	When an EOF condition is detected then AnyEvent::Handle will first try to	197	When an EOF condition is detected then AnyEvent::Handle will first try to
114	feed all the remaining data to the queued callbacks and C<on_read> before	198	feed all the remaining data to the queued callbacks and C<on_read> before
115	calling the C<on_eof> callback. If no progress can be made, then a fatal	199	calling the C<on_eof> callback. If no progress can be made, then a fatal
116	error will be raised (with C<$!> set to C<EPIPE>).	200	error will be raised (with C<$!> set to C<EPIPE>).
117		201
		202	Note that, unlike requests in the read queue, an C<on_read> callback
		203	doesn't mean you I<require> some data: if there is an EOF and there
		204	are outstanding read requests then an error will be flagged. With an
		205	C<on_read> callback, the C<on_eof> callback will be invoked.
		206
		207	=item on_eof => $cb->($handle)
		208
		209	Set the callback to be called when an end-of-file condition is detected,
		210	i.e. in the case of a socket, when the other side has closed the
		211	connection cleanly, and there are no outstanding read requests in the
		212	queue (if there are read requests, then an EOF counts as an unexpected
		213	connection close and will be flagged as an error).
		214
		215	For sockets, this just means that the other side has stopped sending data,
		216	you can still try to write data, and, in fact, one can return from the EOF
		217	callback and continue writing data, as only the read part has been shut
		218	down.
		219
		220	If an EOF condition has been detected but no C<on_eof> callback has been
		221	set, then a fatal error will be raised with C<$!> set to <0>.
		222
118	=item on_drain => $cb->($handle)	223	=item on_drain => $cb->($handle)
119		224
120	This sets the callback that is called when the write buffer becomes empty	225	This sets the callback that is called when the write buffer becomes empty
121	(or when the callback is set and the buffer is empty already).	226	(or when the callback is set and the buffer is empty already).
122		227
123	To append to the write buffer, use the C<< ->push_write >> method.	228	To append to the write buffer, use the C<< ->push_write >> method.
124		229
		230	This callback is useful when you don't want to put all of your write data
		231	into the queue at once, for example, when you want to write the contents
		232	of some file to the socket you might not want to read the whole file into
		233	memory and push it into the queue, but instead only read more data from
		234	the file when the write queue becomes empty.
		235
125	=item timeout => $fractional_seconds	236	=item timeout => $fractional_seconds
126		237
		238	=item rtimeout => $fractional_seconds
		239
		240	=item wtimeout => $fractional_seconds
		241
127	If non-zero, then this enables an "inactivity" timeout: whenever this many	242	If non-zero, then these enables an "inactivity" timeout: whenever this
128	seconds pass without a successful read or write on the underlying file	243	many seconds pass without a successful read or write on the underlying
129	handle, the C<on_timeout> callback will be invoked (and if that one is	244	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
130	missing, an C<ETIMEDOUT> error will be raised).	245	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		246	error will be raised).
		247
		248	There are three variants of the timeouts that work fully independent
		249	of each other, for both read and write, just read, and just write:
		250	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		251	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		252	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
131		253
132	Note that timeout processing is also active when you currently do not have	254	Note that timeout processing is also active when you currently do not have
133	any outstanding read or write requests: If you plan to keep the connection	255	any outstanding read or write requests: If you plan to keep the connection
134	idle then you should disable the timout temporarily or ignore the timeout	256	idle then you should disable the timout temporarily or ignore the timeout
135	in the C<on_timeout> callback.	257	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		258	restart the timeout.
136		259
137	Zero (the default) disables this timeout.	260	Zero (the default) disables this timeout.
138		261
139	=item on_timeout => $cb->($handle)	262	=item on_timeout => $cb->($handle)
140		263
…		…
144		267
145	=item rbuf_max => <bytes>	268	=item rbuf_max => <bytes>
146		269
147	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	270	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
148	when the read buffer ever (strictly) exceeds this size. This is useful to	271	when the read buffer ever (strictly) exceeds this size. This is useful to
149	avoid denial-of-service attacks.	272	avoid some forms of denial-of-service attacks.
150		273
151	For example, a server accepting connections from untrusted sources should	274	For example, a server accepting connections from untrusted sources should
152	be configured to accept only so-and-so much data that it cannot act on	275	be configured to accept only so-and-so much data that it cannot act on
153	(for example, when expecting a line, an attacker could send an unlimited	276	(for example, when expecting a line, an attacker could send an unlimited
154	amount of data without a callback ever being called as long as the line	277	amount of data without a callback ever being called as long as the line
155	isn't finished).	278	isn't finished).
156		279
		280	=item autocork => <boolean>
		281
		282	When disabled (the default), then C<push_write> will try to immediately
		283	write the data to the handle, if possible. This avoids having to register
		284	a write watcher and wait for the next event loop iteration, but can
		285	be inefficient if you write multiple small chunks (on the wire, this
		286	disadvantage is usually avoided by your kernel's nagle algorithm, see
		287	C<no_delay>, but this option can save costly syscalls).
		288
		289	When enabled, then writes will always be queued till the next event loop
		290	iteration. This is efficient when you do many small writes per iteration,
		291	but less efficient when you do a single write only per iteration (or when
		292	the write buffer often is full). It also increases write latency.
		293
		294	=item no_delay => <boolean>
		295
		296	When doing small writes on sockets, your operating system kernel might
		297	wait a bit for more data before actually sending it out. This is called
		298	the Nagle algorithm, and usually it is beneficial.
		299
		300	In some situations you want as low a delay as possible, which can be
		301	accomplishd by setting this option to a true value.
		302
		303	The default is your opertaing system's default behaviour (most likely
		304	enabled), this option explicitly enables or disables it, if possible.
		305
		306	=item keepalive => <boolean>
		307
		308	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		309	normally, TCP connections have no time-out once established, so TCP
		310	connections, once established, can stay alive forever even when the other
		311	side has long gone. TCP keepalives are a cheap way to take down long-lived
		312	TCP connections whent he other side becomes unreachable. While the default
		313	is OS-dependent, TCP keepalives usually kick in after around two hours,
		314	and, if the other side doesn't reply, take down the TCP connection some 10
		315	to 15 minutes later.
		316
		317	It is harmless to specify this option for file handles that do not support
		318	keepalives, and enabling it on connections that are potentially long-lived
		319	is usually a good idea.
		320
		321	=item oobinline => <boolean>
		322
		323	BSD majorly fucked up the implementation of TCP urgent data. The result
		324	is that almost no OS implements TCP according to the specs, and every OS
		325	implements it slightly differently.
		326
		327	If you want to handle TCP urgent data, then setting this flag (the default
		328	is enabled) gives you the most portable way of getting urgent data, by
		329	putting it into the stream.
		330
		331	Since BSD emulation of OOB data on top of TCP's urgent data can have
		332	security implications, AnyEvent::Handle sets this flag automatically
		333	unless explicitly specified. Note that setting this flag after
		334	establishing a connection I<may> be a bit too late (data loss could
		335	already have occured on BSD systems), but at least it will protect you
		336	from most attacks.
		337
157	=item read_size => <bytes>	338	=item read_size => <bytes>
158		339
159	The default read block size (the amount of bytes this module will try to read	340	The default read block size (the amount of bytes this module will
160	during each (loop iteration). Default: C<8192>.	341	try to read during each loop iteration, which affects memory
		342	requirements). Default: C<8192>.
161		343
162	=item low_water_mark => <bytes>	344	=item low_water_mark => <bytes>
163		345
164	Sets the amount of bytes (default: C<0>) that make up an "empty" write	346	Sets the amount of bytes (default: C<0>) that make up an "empty" write
165	buffer: If the write reaches this size or gets even samller it is	347	buffer: If the write reaches this size or gets even samller it is
166	considered empty.	348	considered empty.
167		349
		350	Sometimes it can be beneficial (for performance reasons) to add data to
		351	the write buffer before it is fully drained, but this is a rare case, as
		352	the operating system kernel usually buffers data as well, so the default
		353	is good in almost all cases.
		354
		355	=item linger => <seconds>
		356
		357	If non-zero (default: C<3600>), then the destructor of the
		358	AnyEvent::Handle object will check whether there is still outstanding
		359	write data and will install a watcher that will write this data to the
		360	socket. No errors will be reported (this mostly matches how the operating
		361	system treats outstanding data at socket close time).
		362
		363	This will not work for partial TLS data that could not be encoded
		364	yet. This data will be lost. Calling the C<stoptls> method in time might
		365	help.
		366
		367	=item peername => $string
		368
		369	A string used to identify the remote site - usually the DNS hostname
		370	(I<not> IDN!) used to create the connection, rarely the IP address.
		371
		372	Apart from being useful in error messages, this string is also used in TLS
		373	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		374	verification will be skipped when C<peername> is not specified or
		375	C<undef>.
		376
168	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	377	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
169		378
170	When this parameter is given, it enables TLS (SSL) mode, that means it	379	When this parameter is given, it enables TLS (SSL) mode, that means
171	will start making tls handshake and will transparently encrypt/decrypt	380	AnyEvent will start a TLS handshake as soon as the connection has been
172	data.	381	established and will transparently encrypt/decrypt data afterwards.
		382
		383	All TLS protocol errors will be signalled as C<EPROTO>, with an
		384	appropriate error message.
173		385
174	TLS mode requires Net::SSLeay to be installed (it will be loaded	386	TLS mode requires Net::SSLeay to be installed (it will be loaded
175	automatically when you try to create a TLS handle).	387	automatically when you try to create a TLS handle): this module doesn't
		388	have a dependency on that module, so if your module requires it, you have
		389	to add the dependency yourself.
176		390
177	For the TLS server side, use C<accept>, and for the TLS client side of a	391	Unlike TCP, TLS has a server and client side: for the TLS server side, use
178	connection, use C<connect> mode.	392	C<accept>, and for the TLS client side of a connection, use C<connect>
		393	mode.
179		394
180	You can also provide your own TLS connection object, but you have	395	You can also provide your own TLS connection object, but you have
181	to make sure that you call either C<Net::SSLeay::set_connect_state>	396	to make sure that you call either C<Net::SSLeay::set_connect_state>
182	or C<Net::SSLeay::set_accept_state> on it before you pass it to	397	or C<Net::SSLeay::set_accept_state> on it before you pass it to
183	AnyEvent::Handle.	398	AnyEvent::Handle. Also, this module will take ownership of this connection
		399	object.
184		400
		401	At some future point, AnyEvent::Handle might switch to another TLS
		402	implementation, then the option to use your own session object will go
		403	away.
		404
		405	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		406	passing in the wrong integer will lead to certain crash. This most often
		407	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		408	segmentation fault.
		409
185	See the C<starttls> method if you need to start TLs negotiation later.	410	See the C<< ->starttls >> method for when need to start TLS negotiation later.
186		411
187	=item tls_ctx => $ssl_ctx	412	=item tls_ctx => $anyevent_tls
188		413
189	Use the given Net::SSLeay::CTX object to create the new TLS connection	414	Use the given C<AnyEvent::TLS> object to create the new TLS connection
190	(unless a connection object was specified directly). If this parameter is	415	(unless a connection object was specified directly). If this parameter is
191	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	416	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
192		417
		418	Instead of an object, you can also specify a hash reference with C<< key
		419	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		420	new TLS context object.
		421
		422	=item on_starttls => $cb->($handle, $success[, $error_message])
		423
		424	This callback will be invoked when the TLS/SSL handshake has finished. If
		425	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		426	(C<on_stoptls> will not be called in this case).
		427
		428	The session in C<< $handle->{tls} >> can still be examined in this
		429	callback, even when the handshake was not successful.
		430
		431	TLS handshake failures will not cause C<on_error> to be invoked when this
		432	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		433
		434	Without this callback, handshake failures lead to C<on_error> being
		435	called, as normal.
		436
		437	Note that you cannot call C<starttls> right again in this callback. If you
		438	need to do that, start an zero-second timer instead whose callback can
		439	then call C<< ->starttls >> again.
		440
		441	=item on_stoptls => $cb->($handle)
		442
		443	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		444	set, then it will be invoked after freeing the TLS session. If it is not,
		445	then a TLS shutdown condition will be treated like a normal EOF condition
		446	on the handle.
		447
		448	The session in C<< $handle->{tls} >> can still be examined in this
		449	callback.
		450
		451	This callback will only be called on TLS shutdowns, not when the
		452	underlying handle signals EOF.
		453
193	=item json => JSON or JSON::XS object	454	=item json => JSON or JSON::XS object
194		455
195	This is the json coder object used by the C<json> read and write types.	456	This is the json coder object used by the C<json> read and write types.
196		457
197	If you don't supply it, then AnyEvent::Handle will create and use a	458	If you don't supply it, then AnyEvent::Handle will create and use a
198	suitable one, which will write and expect UTF-8 encoded JSON texts.	459	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		460	texts.
199		461
200	Note that you are responsible to depend on the JSON module if you want to	462	Note that you are responsible to depend on the JSON module if you want to
201	use this functionality, as AnyEvent does not have a dependency itself.	463	use this functionality, as AnyEvent does not have a dependency itself.
202		464
203	=item filter_r => $cb
204
205	=item filter_w => $cb
206
207	These exist, but are undocumented at this time.
208
209	=back	465	=back
210		466
211	=cut	467	=cut
212		468
213	sub new {	469	sub new {
214	my $class = shift;	470	my $class = shift;
215
216	my $self = bless { @_ }, $class;	471	my $self = bless { @_ }, $class;
217		472
218	$self->{fh} or Carp::croak "mandatory argument fh is missing";	473	if ($self->{fh}) {
		474	$self->_start;
		475	return unless $self->{fh}; # could be gone by now
		476
		477	} elsif ($self->{connect}) {
		478	require AnyEvent::Socket;
		479
		480	$self->{peername} = $self->{connect}[0]
		481	unless exists $self->{peername};
		482
		483	$self->{_skip_drain_rbuf} = 1;
		484
		485	{
		486	Scalar::Util::weaken (my $self = $self);
		487
		488	$self->{_connect} =
		489	AnyEvent::Socket::tcp_connect (
		490	$self->{connect}[0],
		491	$self->{connect}[1],
		492	sub {
		493	my ($fh, $host, $port, $retry) = @_;
		494
		495	if ($fh) {
		496	$self->{fh} = $fh;
		497
		498	delete $self->{_skip_drain_rbuf};
		499	$self->_start;
		500
		501	$self->{on_connect}
		502	and $self->{on_connect}($self, $host, $port, sub {
		503	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		504	$self->{_skip_drain_rbuf} = 1;
		505	&$retry;
		506	});
		507
		508	} else {
		509	if ($self->{on_connect_error}) {
		510	$self->{on_connect_error}($self, "$!");
		511	$self->destroy;
		512	} else {
		513	$self->_error ($!, 1);
		514	}
		515	}
		516	},
		517	sub {
		518	local $self->{fh} = $_[0];
		519
		520	$self->{on_prepare}
		521	? $self->{on_prepare}->($self)
		522	: ()
		523	}
		524	);
		525	}
		526
		527	} else {
		528	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		529	}
		530
		531	$self
		532	}
		533
		534	sub _start {
		535	my ($self) = @_;
		536
		537	# too many clueless people try to use udp and similar sockets
		538	# with AnyEvent::Handle, do them a favour.
		539	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		540	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		541	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
219		542
220	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	543	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
221		544
222	if ($self->{tls}) {	545	$self->{_activity} =
223	require Net::SSLeay;	546	$self->{_ractivity} =
		547	$self->{_wactivity} = AE::now;
		548
		549	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		550	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		551	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		552
		553	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		554	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		555
		556	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		557
224	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	558	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
225	}	559	if $self->{tls};
226		560
227	# $self->on_eof (delete $self->{on_eof} ) if $self->{on_eof}; # nop
228	# $self->on_error (delete $self->{on_error}) if $self->{on_error}; # nop
229	# $self->on_read (delete $self->{on_read} ) if $self->{on_read}; # nop
230	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	561	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
231		562
232	$self->{_activity} = AnyEvent->now;
233	$self->_timeout;
234
235	$self->start_read;	563	$self->start_read
		564	if $self->{on_read} || @{ $self->{_queue} };
236		565
237	$self	566	$self->_drain_wbuf;
238	}	567	}
239		568
240	sub _shutdown {
241	my ($self) = @_;
242
243	delete $self->{_tw};
244	delete $self->{_rw};
245	delete $self->{_ww};
246	delete $self->{fh};
247	}
248
249	sub error {	569	sub _error {
250	my ($self) = @_;	570	my ($self, $errno, $fatal, $message) = @_;
251		571
252	{	572	$! = $errno;
253	local $!;	573	$message ||= "$!";
254	$self->_shutdown;
255	}
256		574
257	$self->{on_error}($self)
258	if $self->{on_error};	575	if ($self->{on_error}) {
259		576	$self->{on_error}($self, $fatal, $message);
		577	$self->destroy if $fatal;
		578	} elsif ($self->{fh} || $self->{connect}) {
		579	$self->destroy;
260	Carp::croak "AnyEvent::Handle uncaught fatal error: $!";	580	Carp::croak "AnyEvent::Handle uncaught error: $message";
		581	}
261	}	582	}
262		583
263	=item $fh = $handle->fh	584	=item $fh = $handle->fh
264		585
265	This method returns the file handle of the L<AnyEvent::Handle> object.	586	This method returns the file handle used to create the L<AnyEvent::Handle> object.
266		587
267	=cut	588	=cut
268		589
269	sub fh { $_[0]{fh} }	590	sub fh { $_[0]{fh} }
270		591
…		…
288	$_[0]{on_eof} = $_[1];	609	$_[0]{on_eof} = $_[1];
289	}	610	}
290		611
291	=item $handle->on_timeout ($cb)	612	=item $handle->on_timeout ($cb)
292		613
293	Replace the current C<on_timeout> callback, or disables the callback	614	=item $handle->on_rtimeout ($cb)
294	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
295	argument.
296		615
297	=cut	616	=item $handle->on_wtimeout ($cb)
298		617
		618	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
		619	callback, or disables the callback (but not the timeout) if C<$cb> =
		620	C<undef>. See the C<timeout> constructor argument and method.
		621
		622	=cut
		623
		624	# see below
		625
		626	=item $handle->autocork ($boolean)
		627
		628	Enables or disables the current autocork behaviour (see C<autocork>
		629	constructor argument). Changes will only take effect on the next write.
		630
		631	=cut
		632
		633	sub autocork {
		634	$_[0]{autocork} = $_[1];
		635	}
		636
		637	=item $handle->no_delay ($boolean)
		638
		639	Enables or disables the C<no_delay> setting (see constructor argument of
		640	the same name for details).
		641
		642	=cut
		643
		644	sub no_delay {
		645	$_[0]{no_delay} = $_[1];
		646
		647	eval {
		648	local $SIG{__DIE__};
		649	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		650	if $_[0]{fh};
		651	};
		652	}
		653
		654	=item $handle->keepalive ($boolean)
		655
		656	Enables or disables the C<keepalive> setting (see constructor argument of
		657	the same name for details).
		658
		659	=cut
		660
		661	sub keepalive {
		662	$_[0]{keepalive} = $_[1];
		663
		664	eval {
		665	local $SIG{__DIE__};
		666	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		667	if $_[0]{fh};
		668	};
		669	}
		670
		671	=item $handle->oobinline ($boolean)
		672
		673	Enables or disables the C<oobinline> setting (see constructor argument of
		674	the same name for details).
		675
		676	=cut
		677
		678	sub oobinline {
		679	$_[0]{oobinline} = $_[1];
		680
		681	eval {
		682	local $SIG{__DIE__};
		683	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		684	if $_[0]{fh};
		685	};
		686	}
		687
		688	=item $handle->keepalive ($boolean)
		689
		690	Enables or disables the C<keepalive> setting (see constructor argument of
		691	the same name for details).
		692
		693	=cut
		694
		695	sub keepalive {
		696	$_[0]{keepalive} = $_[1];
		697
		698	eval {
		699	local $SIG{__DIE__};
		700	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		701	if $_[0]{fh};
		702	};
		703	}
		704
		705	=item $handle->on_starttls ($cb)
		706
		707	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		708
		709	=cut
		710
		711	sub on_starttls {
		712	$_[0]{on_starttls} = $_[1];
		713	}
		714
		715	=item $handle->on_stoptls ($cb)
		716
		717	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		718
		719	=cut
		720
299	sub on_timeout {	721	sub on_stoptls {
300	$_[0]{on_timeout} = $_[1];	722	$_[0]{on_stoptls} = $_[1];
		723	}
		724
		725	=item $handle->rbuf_max ($max_octets)
		726
		727	Configures the C<rbuf_max> setting (C<undef> disables it).
		728
		729	=cut
		730
		731	sub rbuf_max {
		732	$_[0]{rbuf_max} = $_[1];
301	}	733	}
302		734
303	#############################################################################	735	#############################################################################
304		736
305	=item $handle->timeout ($seconds)	737	=item $handle->timeout ($seconds)
306		738
		739	=item $handle->rtimeout ($seconds)
		740
		741	=item $handle->wtimeout ($seconds)
		742
307	Configures (or disables) the inactivity timeout.	743	Configures (or disables) the inactivity timeout.
308		744
309	=cut	745	=item $handle->timeout_reset
310		746
311	sub timeout {	747	=item $handle->rtimeout_reset
		748
		749	=item $handle->wtimeout_reset
		750
		751	Reset the activity timeout, as if data was received or sent.
		752
		753	These methods are cheap to call.
		754
		755	=cut
		756
		757	for my $dir ("", "r", "w") {
		758	my $timeout = "${dir}timeout";
		759	my $tw = "_${dir}tw";
		760	my $on_timeout = "on_${dir}timeout";
		761	my $activity = "_${dir}activity";
		762	my $cb;
		763
		764	*$on_timeout = sub {
		765	$_[0]{$on_timeout} = $_[1];
		766	};
		767
		768	*$timeout = sub {
312	my ($self, $timeout) = @_;	769	my ($self, $new_value) = @_;
313		770
314	$self->{timeout} = $timeout;	771	$self->{$timeout} = $new_value;
315	$self->_timeout;	772	delete $self->{$tw}; &$cb;
316	}	773	};
317		774
		775	*{"${dir}timeout_reset"} = sub {
		776	$_[0]{$activity} = AE::now;
		777	};
		778
		779	# main workhorse:
318	# reset the timeout watcher, as neccessary	780	# reset the timeout watcher, as neccessary
319	# also check for time-outs	781	# also check for time-outs
320	sub _timeout {	782	$cb = sub {
321	my ($self) = @_;	783	my ($self) = @_;
322		784
323	if ($self->{timeout}) {	785	if ($self->{$timeout} && $self->{fh}) {
324	my $NOW = AnyEvent->now;	786	my $NOW = AE::now;
325		787
326	# when would the timeout trigger?	788	# when would the timeout trigger?
327	my $after = $self->{_activity} + $self->{timeout} - $NOW;	789	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
328		790
329	# now or in the past already?	791	# now or in the past already?
330	if ($after <= 0) {	792	if ($after <= 0) {
331	$self->{_activity} = $NOW;	793	$self->{$activity} = $NOW;
332		794
333	if ($self->{on_timeout}) {	795	if ($self->{$on_timeout}) {
334	$self->{on_timeout}($self);	796	$self->{$on_timeout}($self);
335	} else {	797	} else {
336	$! = Errno::ETIMEDOUT;	798	$self->_error (Errno::ETIMEDOUT);
337	$self->error;	799	}
		800
		801	# callback could have changed timeout value, optimise
		802	return unless $self->{$timeout};
		803
		804	# calculate new after
		805	$after = $self->{$timeout};
338	}	806	}
339		807
340	# callbakx could have changed timeout value, optimise	808	Scalar::Util::weaken $self;
341	return unless $self->{timeout};	809	return unless $self; # ->error could have destroyed $self
342		810
343	# calculate new after	811	$self->{$tw} ||= AE::timer $after, 0, sub {
344	$after = $self->{timeout};	812	delete $self->{$tw};
		813	$cb->($self);
		814	};
		815	} else {
		816	delete $self->{$tw};
345	}	817	}
346
347	Scalar::Util::weaken $self;
348
349	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
350	delete $self->{_tw};
351	$self->_timeout;
352	});
353	} else {
354	delete $self->{_tw};
355	}	818	}
356	}	819	}
357		820
358	#############################################################################	821	#############################################################################
359		822
…		…
375	=item $handle->on_drain ($cb)	838	=item $handle->on_drain ($cb)
376		839
377	Sets the C<on_drain> callback or clears it (see the description of	840	Sets the C<on_drain> callback or clears it (see the description of
378	C<on_drain> in the constructor).	841	C<on_drain> in the constructor).
379		842
		843	This method may invoke callbacks (and therefore the handle might be
		844	destroyed after it returns).
		845
380	=cut	846	=cut
381		847
382	sub on_drain {	848	sub on_drain {
383	my ($self, $cb) = @_;	849	my ($self, $cb) = @_;
384		850
385	$self->{on_drain} = $cb;	851	$self->{on_drain} = $cb;
386		852
387	$cb->($self)	853	$cb->($self)
388	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	854	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
389	}	855	}
390		856
391	=item $handle->push_write ($data)	857	=item $handle->push_write ($data)
392		858
393	Queues the given scalar to be written. You can push as much data as you	859	Queues the given scalar to be written. You can push as much data as you
394	want (only limited by the available memory), as C<AnyEvent::Handle>	860	want (only limited by the available memory), as C<AnyEvent::Handle>
395	buffers it independently of the kernel.	861	buffers it independently of the kernel.
396		862
		863	This method may invoke callbacks (and therefore the handle might be
		864	destroyed after it returns).
		865
397	=cut	866	=cut
398		867
399	sub _drain_wbuf {	868	sub _drain_wbuf {
400	my ($self) = @_;	869	my ($self) = @_;
401		870
…		…
404	Scalar::Util::weaken $self;	873	Scalar::Util::weaken $self;
405		874
406	my $cb = sub {	875	my $cb = sub {
407	my $len = syswrite $self->{fh}, $self->{wbuf};	876	my $len = syswrite $self->{fh}, $self->{wbuf};
408		877
409	if ($len >= 0) {	878	if (defined $len) {
410	substr $self->{wbuf}, 0, $len, "";	879	substr $self->{wbuf}, 0, $len, "";
411		880
412	$self->{_activity} = AnyEvent->now;	881	$self->{_activity} = $self->{_wactivity} = AE::now;
413		882
414	$self->{on_drain}($self)	883	$self->{on_drain}($self)
415	if $self->{low_water_mark} >= length $self->{wbuf}	884	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
416	&& $self->{on_drain};	885	&& $self->{on_drain};
417		886
418	delete $self->{_ww} unless length $self->{wbuf};	887	delete $self->{_ww} unless length $self->{wbuf};
419	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	888	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
420	$self->error;	889	$self->_error ($!, 1);
421	}	890	}
422	};	891	};
423		892
424	# try to write data immediately	893	# try to write data immediately
425	$cb->();	894	$cb->() unless $self->{autocork};
426		895
427	# if still data left in wbuf, we need to poll	896	# if still data left in wbuf, we need to poll
428	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	897	$self->{_ww} = AE::io $self->{fh}, 1, $cb
429	if length $self->{wbuf};	898	if length $self->{wbuf};
430	};	899	};
431	}	900	}
432		901
433	our %WH;	902	our %WH;
434		903
		904	# deprecated
435	sub register_write_type($$) {	905	sub register_write_type($$) {
436	$WH{$_[0]} = $_[1];	906	$WH{$_[0]} = $_[1];
437	}	907	}
438		908
439	sub push_write {	909	sub push_write {
440	my $self = shift;	910	my $self = shift;
441		911
442	if (@_ > 1) {	912	if (@_ > 1) {
443	my $type = shift;	913	my $type = shift;
444		914
		915	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
445	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	916	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
446	->($self, @_);	917	->($self, @_);
447	}	918	}
448		919
		920	# we downgrade here to avoid hard-to-track-down bugs,
		921	# and diagnose the problem earlier and better.
		922
449	if ($self->{filter_w}) {	923	if ($self->{tls}) {
450	$self->{filter_w}($self, \$_[0]);	924	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
		925	&_dotls ($self) if $self->{fh};
451	} else {	926	} else {
452	$self->{wbuf} .= $_[0];	927	utf8::downgrade $self->{wbuf} .= $_[0];
453	$self->_drain_wbuf;	928	$self->_drain_wbuf if $self->{fh};
454	}	929	}
455	}	930	}
456		931
457	=item $handle->push_write (type => @args)	932	=item $handle->push_write (type => @args)
458		933
459	=item $handle->unshift_write (type => @args)
460
461	Instead of formatting your data yourself, you can also let this module do	934	Instead of formatting your data yourself, you can also let this module
462	the job by specifying a type and type-specific arguments.	935	do the job by specifying a type and type-specific arguments. You
		936	can also specify the (fully qualified) name of a package, in which
		937	case AnyEvent tries to load the package and then expects to find the
		938	C<anyevent_read_type> function inside (see "custom write types", below).
463		939
464	Predefined types are (if you have ideas for additional types, feel free to	940	Predefined types are (if you have ideas for additional types, feel free to
465	drop by and tell us):	941	drop by and tell us):
466		942
467	=over 4	943	=over 4
…		…
469	=item netstring => $string	945	=item netstring => $string
470		946
471	Formats the given value as netstring	947	Formats the given value as netstring
472	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).	948	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).
473		949
474	=back
475
476	=cut	950	=cut
477		951
478	register_write_type netstring => sub {	952	register_write_type netstring => sub {
479	my ($self, $string) = @_;	953	my ($self, $string) = @_;
480		954
481	sprintf "%d:%s,", (length $string), $string	955	(length $string) . ":$string,"
		956	};
		957
		958	=item packstring => $format, $data
		959
		960	An octet string prefixed with an encoded length. The encoding C<$format>
		961	uses the same format as a Perl C<pack> format, but must specify a single
		962	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		963	optional C<!>, C<< < >> or C<< > >> modifier).
		964
		965	=cut
		966
		967	register_write_type packstring => sub {
		968	my ($self, $format, $string) = @_;
		969
		970	pack "$format/a*", $string
482	};	971	};
483		972
484	=item json => $array_or_hashref	973	=item json => $array_or_hashref
485		974
486	Encodes the given hash or array reference into a JSON object. Unless you	975	Encodes the given hash or array reference into a JSON object. Unless you
…		…
511	Other languages could read single lines terminated by a newline and pass	1000	Other languages could read single lines terminated by a newline and pass
512	this line into their JSON decoder of choice.	1001	this line into their JSON decoder of choice.
513		1002
514	=cut	1003	=cut
515		1004
		1005	sub json_coder() {
		1006	eval { require JSON::XS; JSON::XS->new->utf8 }
		1007	|| do { require JSON; JSON->new->utf8 }
		1008	}
		1009
516	register_write_type json => sub {	1010	register_write_type json => sub {
517	my ($self, $ref) = @_;	1011	my ($self, $ref) = @_;
518		1012
519	require JSON;	1013	my $json = $self->{json} ||= json_coder;
520		1014
521	$self->{json} ? $self->{json}->encode ($ref)	1015	$json->encode ($ref)
522	: JSON::encode_json ($ref)
523	};	1016	};
524		1017
525	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1018	=item storable => $reference
526		1019
527	This function (not method) lets you add your own types to C<push_write>.	1020	Freezes the given reference using L<Storable> and writes it to the
		1021	handle. Uses the C<nfreeze> format.
		1022
		1023	=cut
		1024
		1025	register_write_type storable => sub {
		1026	my ($self, $ref) = @_;
		1027
		1028	require Storable;
		1029
		1030	pack "w/a*", Storable::nfreeze ($ref)
		1031	};
		1032
		1033	=back
		1034
		1035	=item $handle->push_shutdown
		1036
		1037	Sometimes you know you want to close the socket after writing your data
		1038	before it was actually written. One way to do that is to replace your
		1039	C<on_drain> handler by a callback that shuts down the socket (and set
		1040	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1041	replaces the C<on_drain> callback with:
		1042
		1043	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1044
		1045	This simply shuts down the write side and signals an EOF condition to the
		1046	the peer.
		1047
		1048	You can rely on the normal read queue and C<on_eof> handling
		1049	afterwards. This is the cleanest way to close a connection.
		1050
		1051	This method may invoke callbacks (and therefore the handle might be
		1052	destroyed after it returns).
		1053
		1054	=cut
		1055
		1056	sub push_shutdown {
		1057	my ($self) = @_;
		1058
		1059	delete $self->{low_water_mark};
		1060	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1061	}
		1062
		1063	=item custom write types - Package::anyevent_write_type $handle, @args
		1064
		1065	Instead of one of the predefined types, you can also specify the name of
		1066	a package. AnyEvent will try to load the package and then expects to find
		1067	a function named C<anyevent_write_type> inside. If it isn't found, it
		1068	progressively tries to load the parent package until it either finds the
		1069	function (good) or runs out of packages (bad).
		1070
528	Whenever the given C<type> is used, C<push_write> will invoke the code	1071	Whenever the given C<type> is used, C<push_write> will the function with
529	reference with the handle object and the remaining arguments.	1072	the handle object and the remaining arguments.
530		1073
531	The code reference is supposed to return a single octet string that will	1074	The function is supposed to return a single octet string that will be
532	be appended to the write buffer.	1075	appended to the write buffer, so you cna mentally treat this function as a
		1076	"arguments to on-the-wire-format" converter.
533		1077
534	Note that this is a function, and all types registered this way will be	1078	Example: implement a custom write type C<join> that joins the remaining
535	global, so try to use unique names.	1079	arguments using the first one.
		1080
		1081	$handle->push_write (My::Type => " ", 1,2,3);
		1082
		1083	# uses the following package, which can be defined in the "My::Type" or in
		1084	# the "My" modules to be auto-loaded, or just about anywhere when the
		1085	# My::Type::anyevent_write_type is defined before invoking it.
		1086
		1087	package My::Type;
		1088
		1089	sub anyevent_write_type {
		1090	my ($handle, $delim, @args) = @_;
		1091
		1092	join $delim, @args
		1093	}
536		1094
537	=cut	1095	=cut
538		1096
539	#############################################################################	1097	#############################################################################
540		1098
…		…
549	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1107	ways, the "simple" way, using only C<on_read> and the "complex" way, using
550	a queue.	1108	a queue.
551		1109
552	In the simple case, you just install an C<on_read> callback and whenever	1110	In the simple case, you just install an C<on_read> callback and whenever
553	new data arrives, it will be called. You can then remove some data (if	1111	new data arrives, it will be called. You can then remove some data (if
554	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	1112	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
555	or not.	1113	leave the data there if you want to accumulate more (e.g. when only a
		1114	partial message has been received so far).
556		1115
557	In the more complex case, you want to queue multiple callbacks. In this	1116	In the more complex case, you want to queue multiple callbacks. In this
558	case, AnyEvent::Handle will call the first queued callback each time new	1117	case, AnyEvent::Handle will call the first queued callback each time new
559	data arrives and removes it when it has done its job (see C<push_read>,	1118	data arrives (also the first time it is queued) and removes it when it has
560	below).	1119	done its job (see C<push_read>, below).
561		1120
562	This way you can, for example, push three line-reads, followed by reading	1121	This way you can, for example, push three line-reads, followed by reading
563	a chunk of data, and AnyEvent::Handle will execute them in order.	1122	a chunk of data, and AnyEvent::Handle will execute them in order.
564		1123
565	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	1124	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
566	the specified number of bytes which give an XML datagram.	1125	the specified number of bytes which give an XML datagram.
567		1126
568	# in the default state, expect some header bytes	1127	# in the default state, expect some header bytes
569	$handle->on_read (sub {	1128	$handle->on_read (sub {
570	# some data is here, now queue the length-header-read (4 octets)	1129	# some data is here, now queue the length-header-read (4 octets)
571	shift->unshift_read_chunk (4, sub {	1130	shift->unshift_read (chunk => 4, sub {
572	# header arrived, decode	1131	# header arrived, decode
573	my $len = unpack "N", $_[1];	1132	my $len = unpack "N", $_[1];
574		1133
575	# now read the payload	1134	# now read the payload
576	shift->unshift_read_chunk ($len, sub {	1135	shift->unshift_read (chunk => $len, sub {
577	my $xml = $_[1];	1136	my $xml = $_[1];
578	# handle xml	1137	# handle xml
579	});	1138	});
580	});	1139	});
581	});	1140	});
582		1141
583	Example 2: Implement a client for a protocol that replies either with	1142	Example 2: Implement a client for a protocol that replies either with "OK"
584	"OK" and another line or "ERROR" for one request, and 64 bytes for the	1143	and another line or "ERROR" for the first request that is sent, and 64
585	second request. Due tot he availability of a full queue, we can just	1144	bytes for the second request. Due to the availability of a queue, we can
586	pipeline sending both requests and manipulate the queue as necessary in	1145	just pipeline sending both requests and manipulate the queue as necessary
587	the callbacks:	1146	in the callbacks.
588		1147
589	# request one	1148	When the first callback is called and sees an "OK" response, it will
		1149	C<unshift> another line-read. This line-read will be queued I<before> the
		1150	64-byte chunk callback.
		1151
		1152	# request one, returns either "OK + extra line" or "ERROR"
590	$handle->push_write ("request 1\015\012");	1153	$handle->push_write ("request 1\015\012");
591		1154
592	# we expect "ERROR" or "OK" as response, so push a line read	1155	# we expect "ERROR" or "OK" as response, so push a line read
593	$handle->push_read_line (sub {	1156	$handle->push_read (line => sub {
594	# if we got an "OK", we have to _prepend_ another line,	1157	# if we got an "OK", we have to _prepend_ another line,
595	# so it will be read before the second request reads its 64 bytes	1158	# so it will be read before the second request reads its 64 bytes
596	# which are already in the queue when this callback is called	1159	# which are already in the queue when this callback is called
597	# we don't do this in case we got an error	1160	# we don't do this in case we got an error
598	if ($_[1] eq "OK") {	1161	if ($_[1] eq "OK") {
599	$_[0]->unshift_read_line (sub {	1162	$_[0]->unshift_read (line => sub {
600	my $response = $_[1];	1163	my $response = $_[1];
601	...	1164	...
602	});	1165	});
603	}	1166	}
604	});	1167	});
605		1168
606	# request two	1169	# request two, simply returns 64 octets
607	$handle->push_write ("request 2\015\012");	1170	$handle->push_write ("request 2\015\012");
608		1171
609	# simply read 64 bytes, always	1172	# simply read 64 bytes, always
610	$handle->push_read_chunk (64, sub {	1173	$handle->push_read (chunk => 64, sub {
611	my $response = $_[1];	1174	my $response = $_[1];
612	...	1175	...
613	});	1176	});
614		1177
615	=over 4	1178	=over 4
616		1179
617	=cut	1180	=cut
618		1181
619	sub _drain_rbuf {	1182	sub _drain_rbuf {
620	my ($self) = @_;	1183	my ($self) = @_;
		1184
		1185	# avoid recursion
		1186	return if $self->{_skip_drain_rbuf};
		1187	local $self->{_skip_drain_rbuf} = 1;
		1188
		1189	while () {
		1190	# we need to use a separate tls read buffer, as we must not receive data while
		1191	# we are draining the buffer, and this can only happen with TLS.
		1192	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1193	if exists $self->{_tls_rbuf};
		1194
		1195	my $len = length $self->{rbuf};
		1196
		1197	if (my $cb = shift @{ $self->{_queue} }) {
		1198	unless ($cb->($self)) {
		1199	# no progress can be made
		1200	# (not enough data and no data forthcoming)
		1201	$self->_error (Errno::EPIPE, 1), return
		1202	if $self->{_eof};
		1203
		1204	unshift @{ $self->{_queue} }, $cb;
		1205	last;
		1206	}
		1207	} elsif ($self->{on_read}) {
		1208	last unless $len;
		1209
		1210	$self->{on_read}($self);
		1211
		1212	if (
		1213	$len == length $self->{rbuf} # if no data has been consumed
		1214	&& !@{ $self->{_queue} } # and the queue is still empty
		1215	&& $self->{on_read} # but we still have on_read
		1216	) {
		1217	# no further data will arrive
		1218	# so no progress can be made
		1219	$self->_error (Errno::EPIPE, 1), return
		1220	if $self->{_eof};
		1221
		1222	last; # more data might arrive
		1223	}
		1224	} else {
		1225	# read side becomes idle
		1226	delete $self->{_rw} unless $self->{tls};
		1227	last;
		1228	}
		1229	}
		1230
		1231	if ($self->{_eof}) {
		1232	$self->{on_eof}
		1233	? $self->{on_eof}($self)
		1234	: $self->_error (0, 1, "Unexpected end-of-file");
		1235
		1236	return;
		1237	}
621		1238
622	if (	1239	if (
623	defined $self->{rbuf_max}	1240	defined $self->{rbuf_max}
624	&& $self->{rbuf_max} < length $self->{rbuf}	1241	&& $self->{rbuf_max} < length $self->{rbuf}
625	) {	1242	) {
626	$! = &Errno::ENOSPC;	1243	$self->_error (Errno::ENOSPC, 1), return;
627	$self->error;
628	}	1244	}
629		1245
630	return if $self->{in_drain};	1246	# may need to restart read watcher
631	local $self->{in_drain} = 1;	1247	unless ($self->{_rw}) {
632		1248	$self->start_read
633	while (my $len = length $self->{rbuf}) {	1249	if $self->{on_read} || @{ $self->{_queue} };
634	no strict 'refs';
635	if (my $cb = shift @{ $self->{_queue} }) {
636	unless ($cb->($self)) {
637	if ($self->{_eof}) {
638	# no progress can be made (not enough data and no data forthcoming)
639	$! = &Errno::EPIPE;
640	$self->error;
641	}
642
643	unshift @{ $self->{_queue} }, $cb;
644	return;
645	}
646	} elsif ($self->{on_read}) {
647	$self->{on_read}($self);
648
649	if (
650	$self->{_eof} # if no further data will arrive
651	&& $len == length $self->{rbuf} # and no data has been consumed
652	&& !@{ $self->{_queue} } # and the queue is still empty
653	&& $self->{on_read} # and we still want to read data
654	) {
655	# then no progress can be made
656	$! = &Errno::EPIPE;
657	$self->error;
658	}
659	} else {
660	# read side becomes idle
661	delete $self->{_rw};
662	return;
663	}
664	}	1250	}
665
666	$self->{on_eof}($self)
667	if $self->{_eof} && $self->{on_eof};
668	}	1251	}
669		1252
670	=item $handle->on_read ($cb)	1253	=item $handle->on_read ($cb)
671		1254
672	This replaces the currently set C<on_read> callback, or clears it (when	1255	This replaces the currently set C<on_read> callback, or clears it (when
673	the new callback is C<undef>). See the description of C<on_read> in the	1256	the new callback is C<undef>). See the description of C<on_read> in the
674	constructor.	1257	constructor.
675		1258
		1259	This method may invoke callbacks (and therefore the handle might be
		1260	destroyed after it returns).
		1261
676	=cut	1262	=cut
677		1263
678	sub on_read {	1264	sub on_read {
679	my ($self, $cb) = @_;	1265	my ($self, $cb) = @_;
680		1266
681	$self->{on_read} = $cb;	1267	$self->{on_read} = $cb;
		1268	$self->_drain_rbuf if $cb;
682	}	1269	}
683		1270
684	=item $handle->rbuf	1271	=item $handle->rbuf
685		1272
686	Returns the read buffer (as a modifiable lvalue).	1273	Returns the read buffer (as a modifiable lvalue).
687		1274
688	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1275	You can access the read buffer directly as the C<< ->{rbuf} >>
689	you want.	1276	member, if you want. However, the only operation allowed on the
		1277	read buffer (apart from looking at it) is removing data from its
		1278	beginning. Otherwise modifying or appending to it is not allowed and will
		1279	lead to hard-to-track-down bugs.
690		1280
691	NOTE: The read buffer should only be used or modified if the C<on_read>,	1281	NOTE: The read buffer should only be used or modified if the C<on_read>,
692	C<push_read> or C<unshift_read> methods are used. The other read methods	1282	C<push_read> or C<unshift_read> methods are used. The other read methods
693	automatically manage the read buffer.	1283	automatically manage the read buffer.
694		1284
…		…
715		1305
716	If enough data was available, then the callback must remove all data it is	1306	If enough data was available, then the callback must remove all data it is
717	interested in (which can be none at all) and return a true value. After returning	1307	interested in (which can be none at all) and return a true value. After returning
718	true, it will be removed from the queue.	1308	true, it will be removed from the queue.
719		1309
		1310	These methods may invoke callbacks (and therefore the handle might be
		1311	destroyed after it returns).
		1312
720	=cut	1313	=cut
721		1314
722	our %RH;	1315	our %RH;
723		1316
724	sub register_read_type($$) {	1317	sub register_read_type($$) {
…		…
730	my $cb = pop;	1323	my $cb = pop;
731		1324
732	if (@_) {	1325	if (@_) {
733	my $type = shift;	1326	my $type = shift;
734		1327
		1328	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
735	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1329	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
736	->($self, $cb, @_);	1330	->($self, $cb, @_);
737	}	1331	}
738		1332
739	push @{ $self->{_queue} }, $cb;	1333	push @{ $self->{_queue} }, $cb;
740	$self->_drain_rbuf;	1334	$self->_drain_rbuf;
…		…
749		1343
750	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1344	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
751	->($self, $cb, @_);	1345	->($self, $cb, @_);
752	}	1346	}
753		1347
754
755	unshift @{ $self->{_queue} }, $cb;	1348	unshift @{ $self->{_queue} }, $cb;
756	$self->_drain_rbuf;	1349	$self->_drain_rbuf;
757	}	1350	}
758		1351
759	=item $handle->push_read (type => @args, $cb)	1352	=item $handle->push_read (type => @args, $cb)
760		1353
761	=item $handle->unshift_read (type => @args, $cb)	1354	=item $handle->unshift_read (type => @args, $cb)
762		1355
763	Instead of providing a callback that parses the data itself you can chose	1356	Instead of providing a callback that parses the data itself you can chose
764	between a number of predefined parsing formats, for chunks of data, lines	1357	between a number of predefined parsing formats, for chunks of data, lines
765	etc.	1358	etc. You can also specify the (fully qualified) name of a package, in
		1359	which case AnyEvent tries to load the package and then expects to find the
		1360	C<anyevent_read_type> function inside (see "custom read types", below).
766		1361
767	Predefined types are (if you have ideas for additional types, feel free to	1362	Predefined types are (if you have ideas for additional types, feel free to
768	drop by and tell us):	1363	drop by and tell us):
769		1364
770	=over 4	1365	=over 4
…		…
791	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1386	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
792	1	1387	1
793	}	1388	}
794	};	1389	};
795		1390
796	# compatibility with older API
797	sub push_read_chunk {
798	$_[0]->push_read (chunk => $_[1], $_[2]);
799	}
800
801	sub unshift_read_chunk {
802	$_[0]->unshift_read (chunk => $_[1], $_[2]);
803	}
804
805	=item line => [$eol, ]$cb->($handle, $line, $eol)	1391	=item line => [$eol, ]$cb->($handle, $line, $eol)
806		1392
807	The callback will be called only once a full line (including the end of	1393	The callback will be called only once a full line (including the end of
808	line marker, C<$eol>) has been read. This line (excluding the end of line	1394	line marker, C<$eol>) has been read. This line (excluding the end of line
809	marker) will be passed to the callback as second argument (C<$line>), and	1395	marker) will be passed to the callback as second argument (C<$line>), and
…		…
824	=cut	1410	=cut
825		1411
826	register_read_type line => sub {	1412	register_read_type line => sub {
827	my ($self, $cb, $eol) = @_;	1413	my ($self, $cb, $eol) = @_;
828		1414
829	$eol = qr|(\015?\012)| if @_ < 3;	1415	if (@_ < 3) {
830	$eol = quotemeta $eol unless ref $eol;	1416	# this is more than twice as fast as the generic code below
831	$eol = qr|^(.*?)($eol)|s;
832
833	sub {	1417	sub {
834	$_[0]{rbuf} =~ s/$eol// or return;	1418	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
835		1419
836	$cb->($_[0], $1, $2);	1420	$cb->($_[0], $1, $2);
837	1
838	}
839	};
840
841	# compatibility with older API
842	sub push_read_line {
843	my $self = shift;
844	$self->push_read (line => @_);
845	}
846
847	sub unshift_read_line {
848	my $self = shift;
849	$self->unshift_read (line => @_);
850	}
851
852	=item netstring => $cb->($handle, $string)
853
854	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
855
856	Throws an error with C<$!> set to EBADMSG on format violations.
857
858	=cut
859
860	register_read_type netstring => sub {
861	my ($self, $cb) = @_;
862
863	sub {
864	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
865	if ($_[0]{rbuf} =~ /[^0-9]/) {
866	$! = &Errno::EBADMSG;
867	$self->error;
868	}	1421	1
869	return;
870	}	1422	}
		1423	} else {
		1424	$eol = quotemeta $eol unless ref $eol;
		1425	$eol = qr|^(.*?)($eol)|s;
871		1426
872	my $len = $1;	1427	sub {
		1428	$_[0]{rbuf} =~ s/$eol// or return;
873		1429
874	$self->unshift_read (chunk => $len, sub {	1430	$cb->($_[0], $1, $2);
875	my $string = $_[1];
876	$_[0]->unshift_read (chunk => 1, sub {
877	if ($_[1] eq ",") {
878	$cb->($_[0], $string);
879	} else {
880	$! = &Errno::EBADMSG;
881	$self->error;
882	}
883	});	1431	1
884	});	1432	}
885
886	1
887	}	1433	}
888	};	1434	};
889		1435
890	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1436	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
891		1437
…		…
943	return 1;	1489	return 1;
944	}	1490	}
945		1491
946	# reject	1492	# reject
947	if ($reject && $$rbuf =~ $reject) {	1493	if ($reject && $$rbuf =~ $reject) {
948	$! = &Errno::EBADMSG;	1494	$self->_error (Errno::EBADMSG);
949	$self->error;
950	}	1495	}
951		1496
952	# skip	1497	# skip
953	if ($skip && $$rbuf =~ $skip) {	1498	if ($skip && $$rbuf =~ $skip) {
954	$data .= substr $$rbuf, 0, $+[0], "";	1499	$data .= substr $$rbuf, 0, $+[0], "";
…		…
956		1501
957	()	1502	()
958	}	1503	}
959	};	1504	};
960		1505
		1506	=item netstring => $cb->($handle, $string)
		1507
		1508	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
		1509
		1510	Throws an error with C<$!> set to EBADMSG on format violations.
		1511
		1512	=cut
		1513
		1514	register_read_type netstring => sub {
		1515	my ($self, $cb) = @_;
		1516
		1517	sub {
		1518	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
		1519	if ($_[0]{rbuf} =~ /[^0-9]/) {
		1520	$self->_error (Errno::EBADMSG);
		1521	}
		1522	return;
		1523	}
		1524
		1525	my $len = $1;
		1526
		1527	$self->unshift_read (chunk => $len, sub {
		1528	my $string = $_[1];
		1529	$_[0]->unshift_read (chunk => 1, sub {
		1530	if ($_[1] eq ",") {
		1531	$cb->($_[0], $string);
		1532	} else {
		1533	$self->_error (Errno::EBADMSG);
		1534	}
		1535	});
		1536	});
		1537
		1538	1
		1539	}
		1540	};
		1541
		1542	=item packstring => $format, $cb->($handle, $string)
		1543
		1544	An octet string prefixed with an encoded length. The encoding C<$format>
		1545	uses the same format as a Perl C<pack> format, but must specify a single
		1546	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1547	optional C<!>, C<< < >> or C<< > >> modifier).
		1548
		1549	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1550	EPP uses a prefix of C<N> (4 octtes).
		1551
		1552	Example: read a block of data prefixed by its length in BER-encoded
		1553	format (very efficient).
		1554
		1555	$handle->push_read (packstring => "w", sub {
		1556	my ($handle, $data) = @_;
		1557	});
		1558
		1559	=cut
		1560
		1561	register_read_type packstring => sub {
		1562	my ($self, $cb, $format) = @_;
		1563
		1564	sub {
		1565	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1566	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
		1567	or return;
		1568
		1569	$format = length pack $format, $len;
		1570
		1571	# bypass unshift if we already have the remaining chunk
		1572	if ($format + $len <= length $_[0]{rbuf}) {
		1573	my $data = substr $_[0]{rbuf}, $format, $len;
		1574	substr $_[0]{rbuf}, 0, $format + $len, "";
		1575	$cb->($_[0], $data);
		1576	} else {
		1577	# remove prefix
		1578	substr $_[0]{rbuf}, 0, $format, "";
		1579
		1580	# read remaining chunk
		1581	$_[0]->unshift_read (chunk => $len, $cb);
		1582	}
		1583
		1584	1
		1585	}
		1586	};
		1587
961	=item json => $cb->($handle, $hash_or_arrayref)	1588	=item json => $cb->($handle, $hash_or_arrayref)
962		1589
963	Reads a JSON object or array, decodes it and passes it to the callback.	1590	Reads a JSON object or array, decodes it and passes it to the
		1591	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
964		1592
965	If a C<json> object was passed to the constructor, then that will be used	1593	If a C<json> object was passed to the constructor, then that will be used
966	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1594	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
967		1595
968	This read type uses the incremental parser available with JSON version	1596	This read type uses the incremental parser available with JSON version
…		…
975	the C<json> write type description, above, for an actual example.	1603	the C<json> write type description, above, for an actual example.
976		1604
977	=cut	1605	=cut
978		1606
979	register_read_type json => sub {	1607	register_read_type json => sub {
980	my ($self, $cb, $accept, $reject, $skip) = @_;	1608	my ($self, $cb) = @_;
981		1609
982	require JSON;	1610	my $json = $self->{json} ||= json_coder;
983		1611
984	my $data;	1612	my $data;
985	my $rbuf = \$self->{rbuf};	1613	my $rbuf = \$self->{rbuf};
986		1614
987	my $json = $self->{json} ||= JSON->new->utf8;
988
989	sub {	1615	sub {
990	my $ref = $json->incr_parse ($self->{rbuf});	1616	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
991		1617
992	if ($ref) {	1618	if ($ref) {
993	$self->{rbuf} = $json->incr_text;	1619	$self->{rbuf} = $json->incr_text;
994	$json->incr_text = "";	1620	$json->incr_text = "";
995	$cb->($self, $ref);	1621	$cb->($self, $ref);
996		1622
997	1	1623	1
		1624	} elsif ($@) {
		1625	# error case
		1626	$json->incr_skip;
		1627
		1628	$self->{rbuf} = $json->incr_text;
		1629	$json->incr_text = "";
		1630
		1631	$self->_error (Errno::EBADMSG);
		1632
		1633	()
998	} else {	1634	} else {
999	$self->{rbuf} = "";	1635	$self->{rbuf} = "";
		1636
1000	()	1637	()
1001	}	1638	}
1002	}	1639	}
1003	};	1640	};
1004		1641
		1642	=item storable => $cb->($handle, $ref)
		1643
		1644	Deserialises a L<Storable> frozen representation as written by the
		1645	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1646	data).
		1647
		1648	Raises C<EBADMSG> error if the data could not be decoded.
		1649
		1650	=cut
		1651
		1652	register_read_type storable => sub {
		1653	my ($self, $cb) = @_;
		1654
		1655	require Storable;
		1656
		1657	sub {
		1658	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1659	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
		1660	or return;
		1661
		1662	my $format = length pack "w", $len;
		1663
		1664	# bypass unshift if we already have the remaining chunk
		1665	if ($format + $len <= length $_[0]{rbuf}) {
		1666	my $data = substr $_[0]{rbuf}, $format, $len;
		1667	substr $_[0]{rbuf}, 0, $format + $len, "";
		1668	$cb->($_[0], Storable::thaw ($data));
		1669	} else {
		1670	# remove prefix
		1671	substr $_[0]{rbuf}, 0, $format, "";
		1672
		1673	# read remaining chunk
		1674	$_[0]->unshift_read (chunk => $len, sub {
		1675	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1676	$cb->($_[0], $ref);
		1677	} else {
		1678	$self->_error (Errno::EBADMSG);
		1679	}
		1680	});
		1681	}
		1682
		1683	1
		1684	}
		1685	};
		1686
1005	=back	1687	=back
1006		1688
1007	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1689	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1008		1690
1009	This function (not method) lets you add your own types to C<push_read>.	1691	Instead of one of the predefined types, you can also specify the name
		1692	of a package. AnyEvent will try to load the package and then expects to
		1693	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1694	progressively tries to load the parent package until it either finds the
		1695	function (good) or runs out of packages (bad).
1010		1696
1011	Whenever the given C<type> is used, C<push_read> will invoke the code	1697	Whenever this type is used, C<push_read> will invoke the function with the
1012	reference with the handle object, the callback and the remaining	1698	handle object, the original callback and the remaining arguments.
1013	arguments.
1014		1699
1015	The code reference is supposed to return a callback (usually a closure)	1700	The function is supposed to return a callback (usually a closure) that
1016	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1701	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1702	mentally treat the function as a "configurable read type to read callback"
		1703	converter.
1017		1704
1018	It should invoke the passed callback when it is done reading (remember to	1705	It should invoke the original callback when it is done reading (remember
1019	pass C<$handle> as first argument as all other callbacks do that).	1706	to pass C<$handle> as first argument as all other callbacks do that,
		1707	although there is no strict requirement on this).
1020		1708
1021	Note that this is a function, and all types registered this way will be
1022	global, so try to use unique names.
1023
1024	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1709	For examples, see the source of this module (F<perldoc -m
1025	search for C<register_read_type>)).	1710	AnyEvent::Handle>, search for C<register_read_type>)).
1026		1711
1027	=item $handle->stop_read	1712	=item $handle->stop_read
1028		1713
1029	=item $handle->start_read	1714	=item $handle->start_read
1030		1715
1031	In rare cases you actually do not want to read anything from the	1716	In rare cases you actually do not want to read anything from the
1032	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1717	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
1033	any queued callbacks will be executed then. To start reading again, call	1718	any queued callbacks will be executed then. To start reading again, call
1034	C<start_read>.	1719	C<start_read>.
1035		1720
		1721	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1722	you change the C<on_read> callback or push/unshift a read callback, and it
		1723	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1724	there are any read requests in the queue.
		1725
		1726	These methods will have no effect when in TLS mode (as TLS doesn't support
		1727	half-duplex connections).
		1728
1036	=cut	1729	=cut
1037		1730
1038	sub stop_read {	1731	sub stop_read {
1039	my ($self) = @_;	1732	my ($self) = @_;
1040		1733
1041	delete $self->{_rw};	1734	delete $self->{_rw} unless $self->{tls};
1042	}	1735	}
1043		1736
1044	sub start_read {	1737	sub start_read {
1045	my ($self) = @_;	1738	my ($self) = @_;
1046		1739
1047	unless ($self->{_rw} || $self->{_eof}) {	1740	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1048	Scalar::Util::weaken $self;	1741	Scalar::Util::weaken $self;
1049		1742
1050	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1743	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1051	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1744	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1052	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1745	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1053		1746
1054	if ($len > 0) {	1747	if ($len > 0) {
1055	$self->{_activity} = AnyEvent->now;	1748	$self->{_activity} = $self->{_ractivity} = AE::now;
1056		1749
1057	$self->{filter_r}	1750	if ($self->{tls}) {
1058	? $self->{filter_r}($self, $rbuf)	1751	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
		1752
		1753	&_dotls ($self);
		1754	} else {
1059	: $self->_drain_rbuf;	1755	$self->_drain_rbuf;
		1756	}
1060		1757
1061	} elsif (defined $len) {	1758	} elsif (defined $len) {
1062	delete $self->{_rw};	1759	delete $self->{_rw};
1063	$self->{_eof} = 1;	1760	$self->{_eof} = 1;
1064	$self->_drain_rbuf;	1761	$self->_drain_rbuf;
1065		1762
1066	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1763	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1067	return $self->error;	1764	return $self->_error ($!, 1);
1068	}	1765	}
1069	});	1766	};
1070	}	1767	}
1071	}	1768	}
1072		1769
		1770	our $ERROR_SYSCALL;
		1771	our $ERROR_WANT_READ;
		1772
		1773	sub _tls_error {
		1774	my ($self, $err) = @_;
		1775
		1776	return $self->_error ($!, 1)
		1777	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1778
		1779	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1780
		1781	# reduce error string to look less scary
		1782	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1783
		1784	if ($self->{_on_starttls}) {
		1785	(delete $self->{_on_starttls})->($self, undef, $err);
		1786	&_freetls;
		1787	} else {
		1788	&_freetls;
		1789	$self->_error (Errno::EPROTO, 1, $err);
		1790	}
		1791	}
		1792
		1793	# poll the write BIO and send the data if applicable
		1794	# also decode read data if possible
		1795	# this is basiclaly our TLS state machine
		1796	# more efficient implementations are possible with openssl,
		1797	# but not with the buggy and incomplete Net::SSLeay.
1073	sub _dotls {	1798	sub _dotls {
1074	my ($self) = @_;	1799	my ($self) = @_;
1075		1800
		1801	my $tmp;
		1802
1076	if (length $self->{_tls_wbuf}) {	1803	if (length $self->{_tls_wbuf}) {
1077	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1804	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1078	substr $self->{_tls_wbuf}, 0, $len, "";	1805	substr $self->{_tls_wbuf}, 0, $tmp, "";
1079	}	1806	}
1080	}
1081		1807
		1808	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1809	return $self->_tls_error ($tmp)
		1810	if $tmp != $ERROR_WANT_READ
		1811	&& ($tmp != $ERROR_SYSCALL || $!);
		1812	}
		1813
		1814	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1815	unless (length $tmp) {
		1816	$self->{_on_starttls}
		1817	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1818	&_freetls;
		1819
		1820	if ($self->{on_stoptls}) {
		1821	$self->{on_stoptls}($self);
		1822	return;
		1823	} else {
		1824	# let's treat SSL-eof as we treat normal EOF
		1825	delete $self->{_rw};
		1826	$self->{_eof} = 1;
		1827	}
		1828	}
		1829
		1830	$self->{_tls_rbuf} .= $tmp;
		1831	$self->_drain_rbuf;
		1832	$self->{tls} or return; # tls session might have gone away in callback
		1833	}
		1834
		1835	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1836	return $self->_tls_error ($tmp)
		1837	if $tmp != $ERROR_WANT_READ
		1838	&& ($tmp != $ERROR_SYSCALL || $!);
		1839
1082	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1840	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1083	$self->{wbuf} .= $buf;	1841	$self->{wbuf} .= $tmp;
1084	$self->_drain_wbuf;	1842	$self->_drain_wbuf;
		1843	$self->{tls} or return; # tls session might have gone away in callback
1085	}	1844	}
1086		1845
1087	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {	1846	$self->{_on_starttls}
1088	$self->{rbuf} .= $buf;	1847	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1089	$self->_drain_rbuf;	1848	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1090	}
1091
1092	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1093
1094	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1095	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1096	$self->error;
1097	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1098	$! = &Errno::EIO;
1099	$self->error;
1100	}
1101
1102	# all others are fine for our purposes
1103	}
1104	}	1849	}
1105		1850
1106	=item $handle->starttls ($tls[, $tls_ctx])	1851	=item $handle->starttls ($tls[, $tls_ctx])
1107		1852
1108	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1853	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1109	object is created, you can also do that at a later time by calling	1854	object is created, you can also do that at a later time by calling
1110	C<starttls>.	1855	C<starttls>.
1111		1856
		1857	Starting TLS is currently an asynchronous operation - when you push some
		1858	write data and then call C<< ->starttls >> then TLS negotiation will start
		1859	immediately, after which the queued write data is then sent.
		1860
1112	The first argument is the same as the C<tls> constructor argument (either	1861	The first argument is the same as the C<tls> constructor argument (either
1113	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1862	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1114		1863
1115	The second argument is the optional C<Net::SSLeay::CTX> object that is	1864	The second argument is the optional C<AnyEvent::TLS> object that is used
1116	used when AnyEvent::Handle has to create its own TLS connection object.	1865	when AnyEvent::Handle has to create its own TLS connection object, or
		1866	a hash reference with C<< key => value >> pairs that will be used to
		1867	construct a new context.
1117		1868
1118	The TLS connection object will end up in C<< $handle->{tls} >> after this	1869	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1119	call and can be used or changed to your liking. Note that the handshake	1870	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1120	might have already started when this function returns.	1871	changed to your liking. Note that the handshake might have already started
		1872	when this function returns.
1121		1873
1122	=cut	1874	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1875	handshakes on the same stream. Best do not attempt to use the stream after
		1876	stopping TLS.
1123		1877
1124	# TODO: maybe document...	1878	This method may invoke callbacks (and therefore the handle might be
		1879	destroyed after it returns).
		1880
		1881	=cut
		1882
		1883	our %TLS_CACHE; #TODO not yet documented, should we?
		1884
1125	sub starttls {	1885	sub starttls {
1126	my ($self, $ssl, $ctx) = @_;	1886	my ($self, $tls, $ctx) = @_;
1127		1887
1128	$self->stoptls;	1888	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1889	if $self->{tls};
1129		1890
1130	if ($ssl eq "accept") {	1891	$self->{tls} = $tls;
1131	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1892	$self->{tls_ctx} = $ctx if @_ > 2;
1132	Net::SSLeay::set_accept_state ($ssl);	1893
1133	} elsif ($ssl eq "connect") {	1894	return unless $self->{fh};
1134	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1895
1135	Net::SSLeay::set_connect_state ($ssl);	1896	require Net::SSLeay;
		1897
		1898	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1899	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1900
		1901	$tls = delete $self->{tls};
		1902	$ctx = $self->{tls_ctx};
		1903
		1904	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1905
		1906	if ("HASH" eq ref $ctx) {
		1907	require AnyEvent::TLS;
		1908
		1909	if ($ctx->{cache}) {
		1910	my $key = $ctx+0;
		1911	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1912	} else {
		1913	$ctx = new AnyEvent::TLS %$ctx;
		1914	}
		1915	}
1136	}	1916
1137		1917	$self->{tls_ctx} = $ctx || TLS_CTX ();
1138	$self->{tls} = $ssl;	1918	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1139		1919
1140	# basically, this is deep magic (because SSL_read should have the same issues)	1920	# basically, this is deep magic (because SSL_read should have the same issues)
1141	# but the openssl maintainers basically said: "trust us, it just works".	1921	# but the openssl maintainers basically said: "trust us, it just works".
1142	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1922	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1143	# and mismaintained ssleay-module doesn't even offer them).	1923	# and mismaintained ssleay-module doesn't even offer them).
1144	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1924	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1925	#
		1926	# in short: this is a mess.
		1927	#
		1928	# note that we do not try to keep the length constant between writes as we are required to do.
		1929	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1930	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1931	# have identity issues in that area.
1145	Net::SSLeay::CTX_set_mode ($self->{tls},	1932	# Net::SSLeay::CTX_set_mode ($ssl,
1146	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1933	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1147	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1934	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1935	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1148		1936
1149	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1937	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1150	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1938	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1151		1939
		1940	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1941
1152	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1942	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1153		1943
1154	$self->{filter_w} = sub {	1944	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1155	$_[0]{_tls_wbuf} .= ${$_[1]};	1945	if $self->{on_starttls};
1156	&_dotls;	1946
1157	};	1947	&_dotls; # need to trigger the initial handshake
1158	$self->{filter_r} = sub {	1948	$self->start_read; # make sure we actually do read
1159	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1160	&_dotls;
1161	};
1162	}	1949	}
1163		1950
1164	=item $handle->stoptls	1951	=item $handle->stoptls
1165		1952
1166	Destroys the SSL connection, if any. Partial read or write data will be	1953	Shuts down the SSL connection - this makes a proper EOF handshake by
1167	lost.	1954	sending a close notify to the other side, but since OpenSSL doesn't
		1955	support non-blocking shut downs, it is not guaranteed that you can re-use
		1956	the stream afterwards.
		1957
		1958	This method may invoke callbacks (and therefore the handle might be
		1959	destroyed after it returns).
1168		1960
1169	=cut	1961	=cut
1170		1962
1171	sub stoptls {	1963	sub stoptls {
1172	my ($self) = @_;	1964	my ($self) = @_;
1173		1965
1174	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1966	if ($self->{tls} && $self->{fh}) {
		1967	Net::SSLeay::shutdown ($self->{tls});
1175		1968
1176	delete $self->{_rbio};	1969	&_dotls;
1177	delete $self->{_wbio};	1970
1178	delete $self->{_tls_wbuf};	1971	# # we don't give a shit. no, we do, but we can't. no...#d#
1179	delete $self->{filter_r};	1972	# # we, we... have to use openssl :/#d#
1180	delete $self->{filter_w};	1973	# &_freetls;#d#
		1974	}
		1975	}
		1976
		1977	sub _freetls {
		1978	my ($self) = @_;
		1979
		1980	return unless $self->{tls};
		1981
		1982	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1983	if $self->{tls} > 0;
		1984
		1985	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1181	}	1986	}
1182		1987
1183	sub DESTROY {	1988	sub DESTROY {
1184	my $self = shift;	1989	my ($self) = @_;
1185		1990
1186	$self->stoptls;	1991	&_freetls;
		1992
		1993	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1994
		1995	if ($linger && length $self->{wbuf} && $self->{fh}) {
		1996	my $fh = delete $self->{fh};
		1997	my $wbuf = delete $self->{wbuf};
		1998
		1999	my @linger;
		2000
		2001	push @linger, AE::io $fh, 1, sub {
		2002	my $len = syswrite $fh, $wbuf, length $wbuf;
		2003
		2004	if ($len > 0) {
		2005	substr $wbuf, 0, $len, "";
		2006	} else {
		2007	@linger = (); # end
		2008	}
		2009	};
		2010	push @linger, AE::timer $linger, 0, sub {
		2011	@linger = ();
		2012	};
		2013	}
1187	}	2014	}
		2015
		2016	=item $handle->destroy
		2017
		2018	Shuts down the handle object as much as possible - this call ensures that
		2019	no further callbacks will be invoked and as many resources as possible
		2020	will be freed. Any method you will call on the handle object after
		2021	destroying it in this way will be silently ignored (and it will return the
		2022	empty list).
		2023
		2024	Normally, you can just "forget" any references to an AnyEvent::Handle
		2025	object and it will simply shut down. This works in fatal error and EOF
		2026	callbacks, as well as code outside. It does I<NOT> work in a read or write
		2027	callback, so when you want to destroy the AnyEvent::Handle object from
		2028	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		2029	that case.
		2030
		2031	Destroying the handle object in this way has the advantage that callbacks
		2032	will be removed as well, so if those are the only reference holders (as
		2033	is common), then one doesn't need to do anything special to break any
		2034	reference cycles.
		2035
		2036	The handle might still linger in the background and write out remaining
		2037	data, as specified by the C<linger> option, however.
		2038
		2039	=cut
		2040
		2041	sub destroy {
		2042	my ($self) = @_;
		2043
		2044	$self->DESTROY;
		2045	%$self = ();
		2046	bless $self, "AnyEvent::Handle::destroyed";
		2047	}
		2048
		2049	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2050	#nop
		2051	}
		2052
		2053	=item $handle->destroyed
		2054
		2055	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2056	->destroy >>, true otherwise.
		2057
		2058	Can be useful to decide whether the handle is still valid after some
		2059	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2060	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2061	can destroy the handle, so work can be avoided by checking sometimes:
		2062
		2063	$hdl->starttls ("accept");
		2064	return if $hdl->destroyed;
		2065	$hdl->push_write (...
		2066
		2067	Note that the call to C<push_write> will silently be ignored if the handle
		2068	has been destroyed, so often you can just ignore the possibility of the
		2069	handle being destroyed.
		2070
		2071	=cut
		2072
		2073	sub destroyed { 0 }
		2074	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1188		2075
1189	=item AnyEvent::Handle::TLS_CTX	2076	=item AnyEvent::Handle::TLS_CTX
1190		2077
1191	This function creates and returns the Net::SSLeay::CTX object used by	2078	This function creates and returns the AnyEvent::TLS object used by default
1192	default for TLS mode.	2079	for TLS mode.
1193		2080
1194	The context is created like this:	2081	The context is created by calling L<AnyEvent::TLS> without any arguments.
1195
1196	Net::SSLeay::load_error_strings;
1197	Net::SSLeay::SSLeay_add_ssl_algorithms;
1198	Net::SSLeay::randomize;
1199
1200	my $CTX = Net::SSLeay::CTX_new;
1201
1202	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1203		2082
1204	=cut	2083	=cut
1205		2084
1206	our $TLS_CTX;	2085	our $TLS_CTX;
1207		2086
1208	sub TLS_CTX() {	2087	sub TLS_CTX() {
1209	$TLS_CTX || do {	2088	$TLS_CTX ||= do {
1210	require Net::SSLeay;	2089	require AnyEvent::TLS;
1211		2090
1212	Net::SSLeay::load_error_strings ();	2091	new AnyEvent::TLS
1213	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1214	Net::SSLeay::randomize ();
1215
1216	$TLS_CTX = Net::SSLeay::CTX_new ();
1217
1218	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1219
1220	$TLS_CTX
1221	}	2092	}
1222	}	2093	}
1223		2094
1224	=back	2095	=back
		2096
		2097
		2098	=head1 NONFREQUENTLY ASKED QUESTIONS
		2099
		2100	=over 4
		2101
		2102	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2103	still get further invocations!
		2104
		2105	That's because AnyEvent::Handle keeps a reference to itself when handling
		2106	read or write callbacks.
		2107
		2108	It is only safe to "forget" the reference inside EOF or error callbacks,
		2109	from within all other callbacks, you need to explicitly call the C<<
		2110	->destroy >> method.
		2111
		2112	=item I get different callback invocations in TLS mode/Why can't I pause
		2113	reading?
		2114
		2115	Unlike, say, TCP, TLS connections do not consist of two independent
		2116	communication channels, one for each direction. Or put differently. The
		2117	read and write directions are not independent of each other: you cannot
		2118	write data unless you are also prepared to read, and vice versa.
		2119
		2120	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		2121	callback invocations when you are not expecting any read data - the reason
		2122	is that AnyEvent::Handle always reads in TLS mode.
		2123
		2124	During the connection, you have to make sure that you always have a
		2125	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2126	connection (or when you no longer want to use it) you can call the
		2127	C<destroy> method.
		2128
		2129	=item How do I read data until the other side closes the connection?
		2130
		2131	If you just want to read your data into a perl scalar, the easiest way
		2132	to achieve this is by setting an C<on_read> callback that does nothing,
		2133	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2134	will be in C<$_[0]{rbuf}>:
		2135
		2136	$handle->on_read (sub { });
		2137	$handle->on_eof (undef);
		2138	$handle->on_error (sub {
		2139	my $data = delete $_[0]{rbuf};
		2140	});
		2141
		2142	The reason to use C<on_error> is that TCP connections, due to latencies
		2143	and packets loss, might get closed quite violently with an error, when in
		2144	fact, all data has been received.
		2145
		2146	It is usually better to use acknowledgements when transferring data,
		2147	to make sure the other side hasn't just died and you got the data
		2148	intact. This is also one reason why so many internet protocols have an
		2149	explicit QUIT command.
		2150
		2151	=item I don't want to destroy the handle too early - how do I wait until
		2152	all data has been written?
		2153
		2154	After writing your last bits of data, set the C<on_drain> callback
		2155	and destroy the handle in there - with the default setting of
		2156	C<low_water_mark> this will be called precisely when all data has been
		2157	written to the socket:
		2158
		2159	$handle->push_write (...);
		2160	$handle->on_drain (sub {
		2161	warn "all data submitted to the kernel\n";
		2162	undef $handle;
		2163	});
		2164
		2165	If you just want to queue some data and then signal EOF to the other side,
		2166	consider using C<< ->push_shutdown >> instead.
		2167
		2168	=item I want to contact a TLS/SSL server, I don't care about security.
		2169
		2170	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2171	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		2172	parameter:
		2173
		2174	tcp_connect $host, $port, sub {
		2175	my ($fh) = @_;
		2176
		2177	my $handle = new AnyEvent::Handle
		2178	fh => $fh,
		2179	tls => "connect",
		2180	on_error => sub { ... };
		2181
		2182	$handle->push_write (...);
		2183	};
		2184
		2185	=item I want to contact a TLS/SSL server, I do care about security.
		2186
		2187	Then you should additionally enable certificate verification, including
		2188	peername verification, if the protocol you use supports it (see
		2189	L<AnyEvent::TLS>, C<verify_peername>).
		2190
		2191	E.g. for HTTPS:
		2192
		2193	tcp_connect $host, $port, sub {
		2194	my ($fh) = @_;
		2195
		2196	my $handle = new AnyEvent::Handle
		2197	fh => $fh,
		2198	peername => $host,
		2199	tls => "connect",
		2200	tls_ctx => { verify => 1, verify_peername => "https" },
		2201	...
		2202
		2203	Note that you must specify the hostname you connected to (or whatever
		2204	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2205	peername verification will be done.
		2206
		2207	The above will use the system-dependent default set of trusted CA
		2208	certificates. If you want to check against a specific CA, add the
		2209	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2210
		2211	tls_ctx => {
		2212	verify => 1,
		2213	verify_peername => "https",
		2214	ca_file => "my-ca-cert.pem",
		2215	},
		2216
		2217	=item I want to create a TLS/SSL server, how do I do that?
		2218
		2219	Well, you first need to get a server certificate and key. You have
		2220	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2221	self-signed certificate (cheap. check the search engine of your choice,
		2222	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2223	nice program for that purpose).
		2224
		2225	Then create a file with your private key (in PEM format, see
		2226	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2227	file should then look like this:
		2228
		2229	-----BEGIN RSA PRIVATE KEY-----
		2230	...header data
		2231	... lots of base64'y-stuff
		2232	-----END RSA PRIVATE KEY-----
		2233
		2234	-----BEGIN CERTIFICATE-----
		2235	... lots of base64'y-stuff
		2236	-----END CERTIFICATE-----
		2237
		2238	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2239	specify this file as C<cert_file>:
		2240
		2241	tcp_server undef, $port, sub {
		2242	my ($fh) = @_;
		2243
		2244	my $handle = new AnyEvent::Handle
		2245	fh => $fh,
		2246	tls => "accept",
		2247	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2248	...
		2249
		2250	When you have intermediate CA certificates that your clients might not
		2251	know about, just append them to the C<cert_file>.
		2252
		2253	=back
		2254
1225		2255
1226	=head1 SUBCLASSING AnyEvent::Handle	2256	=head1 SUBCLASSING AnyEvent::Handle
1227		2257
1228	In many cases, you might want to subclass AnyEvent::Handle.	2258	In many cases, you might want to subclass AnyEvent::Handle.
1229		2259
…		…
1233	=over 4	2263	=over 4
1234		2264
1235	=item * all constructor arguments become object members.	2265	=item * all constructor arguments become object members.
1236		2266
1237	At least initially, when you pass a C<tls>-argument to the constructor it	2267	At least initially, when you pass a C<tls>-argument to the constructor it
1238	will end up in C<< $handle->{tls} >>. Those members might be changes or	2268	will end up in C<< $handle->{tls} >>. Those members might be changed or
1239	mutated later on (for example C<tls> will hold the TLS connection object).	2269	mutated later on (for example C<tls> will hold the TLS connection object).
1240		2270
1241	=item * other object member names are prefixed with an C<_>.	2271	=item * other object member names are prefixed with an C<_>.
1242		2272
1243	All object members not explicitly documented (internal use) are prefixed	2273	All object members not explicitly documented (internal use) are prefixed

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines