ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.65 by root, Fri Jun 6 11:05:16 2008 UTC vs.
Revision 1.203 by root, Sat Oct 16 03:22:10 2010 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.15;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes, and other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
		40
54	In the following, when the documentation refers to of "bytes" then this	41	In the following, where the documentation refers to "bytes", it means
55	means characters. As sysread and syswrite are used for all I/O, their	42	characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
57		47
58	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
59	argument.	49	argument.
60		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
		80	sub MAX_READ_SIZE() { 131072 }
		81
61	=head1 METHODS	82	=head1 METHODS
62		83
63	=over 4	84	=over 4
64		85
65	=item B<new (%args)>	86	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
66		87
67	The constructor supports these arguments (all as key => value pairs).	88	The constructor supports these arguments (all as C<< key => value >> pairs).
68		89
69	=over 4	90	=over 4
70		91
71	=item fh => $filehandle [MANDATORY]	92	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		93
73	The filehandle this L<AnyEvent::Handle> object will operate on.	94	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	95	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	96	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		97	that mode.
77		98
		99	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		100
		101	Try to connect to the specified host and service (port), using
		102	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		103	default C<peername>.
		104
		105	You have to specify either this parameter, or C<fh>, above.
		106
		107	It is possible to push requests on the read and write queues, and modify
		108	properties of the stream, even while AnyEvent::Handle is connecting.
		109
		110	When this parameter is specified, then the C<on_prepare>,
		111	C<on_connect_error> and C<on_connect> callbacks will be called under the
		112	appropriate circumstances:
		113
		114	=over 4
		115
78	=item on_eof => $cb->($handle)	116	=item on_prepare => $cb->($handle)
79		117
80	Set the callback to be called when an end-of-file condition is detcted,	118	This (rarely used) callback is called before a new connection is
81	i.e. in the case of a socket, when the other side has closed the	119	attempted, but after the file handle has been created. It could be used to
82	connection cleanly.	120	prepare the file handle with parameters required for the actual connect
		121	(as opposed to settings that can be changed when the connection is already
		122	established).
83		123
84	While not mandatory, it is highly recommended to set an eof callback,	124	The return value of this callback should be the connect timeout value in
85	otherwise you might end up with a closed socket while you are still	125	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
86	waiting for data.	126	default timeout is to be used).
87		127
		128	=item on_connect => $cb->($handle, $host, $port, $retry->())
		129
		130	This callback is called when a connection has been successfully established.
		131
		132	The peer's numeric host and port (the socket peername) are passed as
		133	parameters, together with a retry callback.
		134
		135	If, for some reason, the handle is not acceptable, calling C<$retry>
		136	will continue with the next connection target (in case of multi-homed
		137	hosts or SRV records there can be multiple connection endpoints). At the
		138	time it is called the read and write queues, eof status, tls status and
		139	similar properties of the handle will have been reset.
		140
		141	In most cases, you should ignore the C<$retry> parameter.
		142
		143	=item on_connect_error => $cb->($handle, $message)
		144
		145	This callback is called when the connection could not be
		146	established. C<$!> will contain the relevant error code, and C<$message> a
		147	message describing it (usually the same as C<"$!">).
		148
		149	If this callback isn't specified, then C<on_error> will be called with a
		150	fatal error instead.
		151
		152	=back
		153
88	=item on_error => $cb->($handle, $fatal)	154	=item on_error => $cb->($handle, $fatal, $message)
89		155
90	This is the error callback, which is called when, well, some error	156	This is the error callback, which is called when, well, some error
91	occured, such as not being able to resolve the hostname, failure to	157	occured, such as not being able to resolve the hostname, failure to
92	connect or a read error.	158	connect, or a read error.
93		159
94	Some errors are fatal (which is indicated by C<$fatal> being true). On	160	Some errors are fatal (which is indicated by C<$fatal> being true). On
95	fatal errors the handle object will be shut down and will not be	161	fatal errors the handle object will be destroyed (by a call to C<< ->
		162	destroy >>) after invoking the error callback (which means you are free to
		163	examine the handle object). Examples of fatal errors are an EOF condition
		164	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		165	cases where the other side can close the connection at will, it is
		166	often easiest to not report C<EPIPE> errors in this callback.
		167
		168	AnyEvent::Handle tries to find an appropriate error code for you to check
		169	against, but in some cases (TLS errors), this does not work well. It is
		170	recommended to always output the C<$message> argument in human-readable
		171	error messages (it's usually the same as C<"$!">).
		172
96	usable. Non-fatal errors can be retried by simply returning, but it is	173	Non-fatal errors can be retried by returning, but it is recommended
97	recommended to simply ignore this parameter and instead abondon the handle	174	to simply ignore this parameter and instead abondon the handle object
98	object when this callback is invoked.	175	when this callback is invoked. Examples of non-fatal errors are timeouts
		176	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
99		177
100	On callback entrance, the value of C<$!> contains the operating system	178	On entry to the callback, the value of C<$!> contains the operating
101	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	179	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		180	C<EPROTO>).
102		181
103	While not mandatory, it is I<highly> recommended to set this callback, as	182	While not mandatory, it is I<highly> recommended to set this callback, as
104	you will not be notified of errors otherwise. The default simply calls	183	you will not be notified of errors otherwise. The default just calls
105	C<croak>.	184	C<croak>.
106		185
107	=item on_read => $cb->($handle)	186	=item on_read => $cb->($handle)
108		187
109	This sets the default read callback, which is called when data arrives	188	This sets the default read callback, which is called when data arrives
110	and no read request is in the queue (unlike read queue callbacks, this	189	and no read request is in the queue (unlike read queue callbacks, this
111	callback will only be called when at least one octet of data is in the	190	callback will only be called when at least one octet of data is in the
112	read buffer).	191	read buffer).
113		192
114	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	193	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
115	method or access the C<$handle->{rbuf}> member directly.	194	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		195	must not enlarge or modify the read buffer, you can only remove data at
		196	the beginning from it.
116		197
		198	You can also call C<< ->push_read (...) >> or any other function that
		199	modifies the read queue. Or do both. Or ...
		200
117	When an EOF condition is detected then AnyEvent::Handle will first try to	201	When an EOF condition is detected, AnyEvent::Handle will first try to
118	feed all the remaining data to the queued callbacks and C<on_read> before	202	feed all the remaining data to the queued callbacks and C<on_read> before
119	calling the C<on_eof> callback. If no progress can be made, then a fatal	203	calling the C<on_eof> callback. If no progress can be made, then a fatal
120	error will be raised (with C<$!> set to C<EPIPE>).	204	error will be raised (with C<$!> set to C<EPIPE>).
121		205
		206	Note that, unlike requests in the read queue, an C<on_read> callback
		207	doesn't mean you I<require> some data: if there is an EOF and there
		208	are outstanding read requests then an error will be flagged. With an
		209	C<on_read> callback, the C<on_eof> callback will be invoked.
		210
		211	=item on_eof => $cb->($handle)
		212
		213	Set the callback to be called when an end-of-file condition is detected,
		214	i.e. in the case of a socket, when the other side has closed the
		215	connection cleanly, and there are no outstanding read requests in the
		216	queue (if there are read requests, then an EOF counts as an unexpected
		217	connection close and will be flagged as an error).
		218
		219	For sockets, this just means that the other side has stopped sending data,
		220	you can still try to write data, and, in fact, one can return from the EOF
		221	callback and continue writing data, as only the read part has been shut
		222	down.
		223
		224	If an EOF condition has been detected but no C<on_eof> callback has been
		225	set, then a fatal error will be raised with C<$!> set to <0>.
		226
122	=item on_drain => $cb->($handle)	227	=item on_drain => $cb->($handle)
123		228
124	This sets the callback that is called when the write buffer becomes empty	229	This sets the callback that is called when the write buffer becomes empty
125	(or when the callback is set and the buffer is empty already).	230	(or immediately if the buffer is empty already).
126		231
127	To append to the write buffer, use the C<< ->push_write >> method.	232	To append to the write buffer, use the C<< ->push_write >> method.
128		233
		234	This callback is useful when you don't want to put all of your write data
		235	into the queue at once, for example, when you want to write the contents
		236	of some file to the socket you might not want to read the whole file into
		237	memory and push it into the queue, but instead only read more data from
		238	the file when the write queue becomes empty.
		239
129	=item timeout => $fractional_seconds	240	=item timeout => $fractional_seconds
130		241
		242	=item rtimeout => $fractional_seconds
		243
		244	=item wtimeout => $fractional_seconds
		245
131	If non-zero, then this enables an "inactivity" timeout: whenever this many	246	If non-zero, then these enables an "inactivity" timeout: whenever this
132	seconds pass without a successful read or write on the underlying file	247	many seconds pass without a successful read or write on the underlying
133	handle, the C<on_timeout> callback will be invoked (and if that one is	248	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
134	missing, an C<ETIMEDOUT> error will be raised).	249	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		250	error will be raised).
135		251
		252	There are three variants of the timeouts that work independently
		253	of each other, for both read and write, just read, and just write:
		254	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		255	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		256	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		257
136	Note that timeout processing is also active when you currently do not have	258	Note that timeout processing is active even when you do not have
137	any outstanding read or write requests: If you plan to keep the connection	259	any outstanding read or write requests: If you plan to keep the connection
138	idle then you should disable the timout temporarily or ignore the timeout	260	idle then you should disable the timeout temporarily or ignore the timeout
139	in the C<on_timeout> callback.	261	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		262	restart the timeout.
140		263
141	Zero (the default) disables this timeout.	264	Zero (the default) disables this timeout.
142		265
143	=item on_timeout => $cb->($handle)	266	=item on_timeout => $cb->($handle)
144		267
…		…
148		271
149	=item rbuf_max => <bytes>	272	=item rbuf_max => <bytes>
150		273
151	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	274	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
152	when the read buffer ever (strictly) exceeds this size. This is useful to	275	when the read buffer ever (strictly) exceeds this size. This is useful to
153	avoid denial-of-service attacks.	276	avoid some forms of denial-of-service attacks.
154		277
155	For example, a server accepting connections from untrusted sources should	278	For example, a server accepting connections from untrusted sources should
156	be configured to accept only so-and-so much data that it cannot act on	279	be configured to accept only so-and-so much data that it cannot act on
157	(for example, when expecting a line, an attacker could send an unlimited	280	(for example, when expecting a line, an attacker could send an unlimited
158	amount of data without a callback ever being called as long as the line	281	amount of data without a callback ever being called as long as the line
159	isn't finished).	282	isn't finished).
160		283
		284	=item autocork => <boolean>
		285
		286	When disabled (the default), C<push_write> will try to immediately
		287	write the data to the handle if possible. This avoids having to register
		288	a write watcher and wait for the next event loop iteration, but can
		289	be inefficient if you write multiple small chunks (on the wire, this
		290	disadvantage is usually avoided by your kernel's nagle algorithm, see
		291	C<no_delay>, but this option can save costly syscalls).
		292
		293	When enabled, writes will always be queued till the next event loop
		294	iteration. This is efficient when you do many small writes per iteration,
		295	but less efficient when you do a single write only per iteration (or when
		296	the write buffer often is full). It also increases write latency.
		297
		298	=item no_delay => <boolean>
		299
		300	When doing small writes on sockets, your operating system kernel might
		301	wait a bit for more data before actually sending it out. This is called
		302	the Nagle algorithm, and usually it is beneficial.
		303
		304	In some situations you want as low a delay as possible, which can be
		305	accomplishd by setting this option to a true value.
		306
		307	The default is your operating system's default behaviour (most likely
		308	enabled). This option explicitly enables or disables it, if possible.
		309
		310	=item keepalive => <boolean>
		311
		312	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		313	normally, TCP connections have no time-out once established, so TCP
		314	connections, once established, can stay alive forever even when the other
		315	side has long gone. TCP keepalives are a cheap way to take down long-lived
		316	TCP connections when the other side becomes unreachable. While the default
		317	is OS-dependent, TCP keepalives usually kick in after around two hours,
		318	and, if the other side doesn't reply, take down the TCP connection some 10
		319	to 15 minutes later.
		320
		321	It is harmless to specify this option for file handles that do not support
		322	keepalives, and enabling it on connections that are potentially long-lived
		323	is usually a good idea.
		324
		325	=item oobinline => <boolean>
		326
		327	BSD majorly fucked up the implementation of TCP urgent data. The result
		328	is that almost no OS implements TCP according to the specs, and every OS
		329	implements it slightly differently.
		330
		331	If you want to handle TCP urgent data, then setting this flag (the default
		332	is enabled) gives you the most portable way of getting urgent data, by
		333	putting it into the stream.
		334
		335	Since BSD emulation of OOB data on top of TCP's urgent data can have
		336	security implications, AnyEvent::Handle sets this flag automatically
		337	unless explicitly specified. Note that setting this flag after
		338	establishing a connection I<may> be a bit too late (data loss could
		339	already have occured on BSD systems), but at least it will protect you
		340	from most attacks.
		341
161	=item read_size => <bytes>	342	=item read_size => <bytes>
162		343
163	The default read block size (the amount of bytes this module will try to read	344	The initial read block size, the number of bytes this module will try to
164	during each (loop iteration). Default: C<8192>.	345	read during each loop iteration. Each handle object will consume at least
		346	this amount of memory for the read buffer as well, so when handling many
		347	connections requirements). See also C<max_read_size>. Default: C<2048>.
		348
		349	=item max_read_size => <bytes>
		350
		351	The maximum read buffer size used by the dynamic adjustment
		352	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		353	one go it will double C<read_size> up to the maximum given by this
		354	option. Default: C<131072> or C<read_size>, whichever is higher.
165		355
166	=item low_water_mark => <bytes>	356	=item low_water_mark => <bytes>
167		357
168	Sets the amount of bytes (default: C<0>) that make up an "empty" write	358	Sets the number of bytes (default: C<0>) that make up an "empty" write
169	buffer: If the write reaches this size or gets even samller it is	359	buffer: If the buffer reaches this size or gets even samller it is
170	considered empty.	360	considered empty.
171		361
		362	Sometimes it can be beneficial (for performance reasons) to add data to
		363	the write buffer before it is fully drained, but this is a rare case, as
		364	the operating system kernel usually buffers data as well, so the default
		365	is good in almost all cases.
		366
172	=item linger => <seconds>	367	=item linger => <seconds>
173		368
174	If non-zero (default: C<3600>), then the destructor of the	369	If this is non-zero (default: C<3600>), the destructor of the
175	AnyEvent::Handle object will check wether there is still outstanding write	370	AnyEvent::Handle object will check whether there is still outstanding
176	data and will install a watcher that will write out this data. No errors	371	write data and will install a watcher that will write this data to the
177	will be reported (this mostly matches how the operating system treats	372	socket. No errors will be reported (this mostly matches how the operating
178	outstanding data at socket close time).	373	system treats outstanding data at socket close time).
179		374
180	This will not work for partial TLS data that could not yet been	375	This will not work for partial TLS data that could not be encoded
181	encoded. This data will be lost.	376	yet. This data will be lost. Calling the C<stoptls> method in time might
		377	help.
		378
		379	=item peername => $string
		380
		381	A string used to identify the remote site - usually the DNS hostname
		382	(I<not> IDN!) used to create the connection, rarely the IP address.
		383
		384	Apart from being useful in error messages, this string is also used in TLS
		385	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		386	verification will be skipped when C<peername> is not specified or is
		387	C<undef>.
182		388
183	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	389	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
184		390
185	When this parameter is given, it enables TLS (SSL) mode, that means it	391	When this parameter is given, it enables TLS (SSL) mode, that means
186	will start making tls handshake and will transparently encrypt/decrypt	392	AnyEvent will start a TLS handshake as soon as the connection has been
187	data.	393	established and will transparently encrypt/decrypt data afterwards.
		394
		395	All TLS protocol errors will be signalled as C<EPROTO>, with an
		396	appropriate error message.
188		397
189	TLS mode requires Net::SSLeay to be installed (it will be loaded	398	TLS mode requires Net::SSLeay to be installed (it will be loaded
190	automatically when you try to create a TLS handle).	399	automatically when you try to create a TLS handle): this module doesn't
		400	have a dependency on that module, so if your module requires it, you have
		401	to add the dependency yourself.
191		402
192	For the TLS server side, use C<accept>, and for the TLS client side of a	403	Unlike TCP, TLS has a server and client side: for the TLS server side, use
193	connection, use C<connect> mode.	404	C<accept>, and for the TLS client side of a connection, use C<connect>
		405	mode.
194		406
195	You can also provide your own TLS connection object, but you have	407	You can also provide your own TLS connection object, but you have
196	to make sure that you call either C<Net::SSLeay::set_connect_state>	408	to make sure that you call either C<Net::SSLeay::set_connect_state>
197	or C<Net::SSLeay::set_accept_state> on it before you pass it to	409	or C<Net::SSLeay::set_accept_state> on it before you pass it to
198	AnyEvent::Handle.	410	AnyEvent::Handle. Also, this module will take ownership of this connection
		411	object.
199		412
		413	At some future point, AnyEvent::Handle might switch to another TLS
		414	implementation, then the option to use your own session object will go
		415	away.
		416
		417	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		418	passing in the wrong integer will lead to certain crash. This most often
		419	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		420	segmentation fault.
		421
200	See the C<starttls> method if you need to start TLs negotiation later.	422	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
201		423
202	=item tls_ctx => $ssl_ctx	424	=item tls_ctx => $anyevent_tls
203		425
204	Use the given Net::SSLeay::CTX object to create the new TLS connection	426	Use the given C<AnyEvent::TLS> object to create the new TLS connection
205	(unless a connection object was specified directly). If this parameter is	427	(unless a connection object was specified directly). If this parameter is
206	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	428	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
207		429
		430	Instead of an object, you can also specify a hash reference with C<< key
		431	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		432	new TLS context object.
		433
		434	=item on_starttls => $cb->($handle, $success[, $error_message])
		435
		436	This callback will be invoked when the TLS/SSL handshake has finished. If
		437	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		438	(C<on_stoptls> will not be called in this case).
		439
		440	The session in C<< $handle->{tls} >> can still be examined in this
		441	callback, even when the handshake was not successful.
		442
		443	TLS handshake failures will not cause C<on_error> to be invoked when this
		444	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		445
		446	Without this callback, handshake failures lead to C<on_error> being
		447	called as usual.
		448
		449	Note that you cannot just call C<starttls> again in this callback. If you
		450	need to do that, start an zero-second timer instead whose callback can
		451	then call C<< ->starttls >> again.
		452
		453	=item on_stoptls => $cb->($handle)
		454
		455	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		456	set, then it will be invoked after freeing the TLS session. If it is not,
		457	then a TLS shutdown condition will be treated like a normal EOF condition
		458	on the handle.
		459
		460	The session in C<< $handle->{tls} >> can still be examined in this
		461	callback.
		462
		463	This callback will only be called on TLS shutdowns, not when the
		464	underlying handle signals EOF.
		465
208	=item json => JSON or JSON::XS object	466	=item json => JSON or JSON::XS object
209		467
210	This is the json coder object used by the C<json> read and write types.	468	This is the json coder object used by the C<json> read and write types.
211		469
212	If you don't supply it, then AnyEvent::Handle will create and use a	470	If you don't supply it, then AnyEvent::Handle will create and use a
213	suitable one, which will write and expect UTF-8 encoded JSON texts.	471	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		472	texts.
214		473
215	Note that you are responsible to depend on the JSON module if you want to	474	Note that you are responsible to depend on the JSON module if you want to
216	use this functionality, as AnyEvent does not have a dependency itself.	475	use this functionality, as AnyEvent does not have a dependency itself.
217		476
218	=item filter_r => $cb
219
220	=item filter_w => $cb
221
222	These exist, but are undocumented at this time.
223
224	=back	477	=back
225		478
226	=cut	479	=cut
227		480
228	sub new {	481	sub new {
229	my $class = shift;	482	my $class = shift;
230
231	my $self = bless { @_ }, $class;	483	my $self = bless { @_ }, $class;
232		484
233	$self->{fh} or Carp::croak "mandatory argument fh is missing";	485	if ($self->{fh}) {
		486	$self->_start;
		487	return unless $self->{fh}; # could be gone by now
		488
		489	} elsif ($self->{connect}) {
		490	require AnyEvent::Socket;
		491
		492	$self->{peername} = $self->{connect}[0]
		493	unless exists $self->{peername};
		494
		495	$self->{_skip_drain_rbuf} = 1;
		496
		497	{
		498	Scalar::Util::weaken (my $self = $self);
		499
		500	$self->{_connect} =
		501	AnyEvent::Socket::tcp_connect (
		502	$self->{connect}[0],
		503	$self->{connect}[1],
		504	sub {
		505	my ($fh, $host, $port, $retry) = @_;
		506
		507	if ($fh) {
		508	$self->{fh} = $fh;
		509
		510	delete $self->{_skip_drain_rbuf};
		511	$self->_start;
		512
		513	$self->{on_connect}
		514	and $self->{on_connect}($self, $host, $port, sub {
		515	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		516	$self->{_skip_drain_rbuf} = 1;
		517	&$retry;
		518	});
		519
		520	} else {
		521	if ($self->{on_connect_error}) {
		522	$self->{on_connect_error}($self, "$!");
		523	$self->destroy;
		524	} else {
		525	$self->_error ($!, 1);
		526	}
		527	}
		528	},
		529	sub {
		530	local $self->{fh} = $_[0];
		531
		532	$self->{on_prepare}
		533	? $self->{on_prepare}->($self)
		534	: ()
		535	}
		536	);
		537	}
		538
		539	} else {
		540	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		541	}
		542
		543	$self
		544	}
		545
		546	sub _start {
		547	my ($self) = @_;
		548
		549	# too many clueless people try to use udp and similar sockets
		550	# with AnyEvent::Handle, do them a favour.
		551	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		552	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		553	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
234		554
235	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	555	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
236		556
237	if ($self->{tls}) {	557	$self->{_activity} =
238	require Net::SSLeay;	558	$self->{_ractivity} =
		559	$self->{_wactivity} = AE::now;
		560
		561	$self->{read_size} ||= 2048;
		562	$self->{max_read_size} = $self->{read_size}
		563	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		564
		565	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		566	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		567	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		568
		569	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		570	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		571
		572	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		573
239	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	574	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
240	}	575	if $self->{tls};
241		576
242	$self->{_activity} = AnyEvent->now;
243	$self->_timeout;
244
245	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	577	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
246		578
247	$self	579	$self->start_read
248	}	580	if $self->{on_read} || @{ $self->{_queue} };
249		581
250	sub _shutdown {	582	$self->_drain_wbuf;
251	my ($self) = @_;
252
253	delete $self->{_tw};
254	delete $self->{_rw};
255	delete $self->{_ww};
256	delete $self->{fh};
257
258	$self->stoptls;
259	}	583	}
260		584
261	sub _error {	585	sub _error {
262	my ($self, $errno, $fatal) = @_;	586	my ($self, $errno, $fatal, $message) = @_;
263
264	$self->_shutdown
265	if $fatal;
266		587
267	$! = $errno;	588	$! = $errno;
		589	$message ||= "$!";
268		590
269	if ($self->{on_error}) {	591	if ($self->{on_error}) {
270	$self->{on_error}($self, $fatal);	592	$self->{on_error}($self, $fatal, $message);
271	} else {	593	$self->destroy if $fatal;
		594	} elsif ($self->{fh} || $self->{connect}) {
		595	$self->destroy;
272	Carp::croak "AnyEvent::Handle uncaught error: $!";	596	Carp::croak "AnyEvent::Handle uncaught error: $message";
273	}	597	}
274	}	598	}
275		599
276	=item $fh = $handle->fh	600	=item $fh = $handle->fh
277		601
278	This method returns the file handle of the L<AnyEvent::Handle> object.	602	This method returns the file handle used to create the L<AnyEvent::Handle> object.
279		603
280	=cut	604	=cut
281		605
282	sub fh { $_[0]{fh} }	606	sub fh { $_[0]{fh} }
283		607
…		…
301	$_[0]{on_eof} = $_[1];	625	$_[0]{on_eof} = $_[1];
302	}	626	}
303		627
304	=item $handle->on_timeout ($cb)	628	=item $handle->on_timeout ($cb)
305		629
306	Replace the current C<on_timeout> callback, or disables the callback	630	=item $handle->on_rtimeout ($cb)
307	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
308	argument.
309		631
310	=cut	632	=item $handle->on_wtimeout ($cb)
311		633
		634	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
		635	callback, or disables the callback (but not the timeout) if C<$cb> =
		636	C<undef>. See the C<timeout> constructor argument and method.
		637
		638	=cut
		639
		640	# see below
		641
		642	=item $handle->autocork ($boolean)
		643
		644	Enables or disables the current autocork behaviour (see C<autocork>
		645	constructor argument). Changes will only take effect on the next write.
		646
		647	=cut
		648
		649	sub autocork {
		650	$_[0]{autocork} = $_[1];
		651	}
		652
		653	=item $handle->no_delay ($boolean)
		654
		655	Enables or disables the C<no_delay> setting (see constructor argument of
		656	the same name for details).
		657
		658	=cut
		659
		660	sub no_delay {
		661	$_[0]{no_delay} = $_[1];
		662
		663	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		664	if $_[0]{fh};
		665	}
		666
		667	=item $handle->keepalive ($boolean)
		668
		669	Enables or disables the C<keepalive> setting (see constructor argument of
		670	the same name for details).
		671
		672	=cut
		673
		674	sub keepalive {
		675	$_[0]{keepalive} = $_[1];
		676
		677	eval {
		678	local $SIG{__DIE__};
		679	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		680	if $_[0]{fh};
		681	};
		682	}
		683
		684	=item $handle->oobinline ($boolean)
		685
		686	Enables or disables the C<oobinline> setting (see constructor argument of
		687	the same name for details).
		688
		689	=cut
		690
		691	sub oobinline {
		692	$_[0]{oobinline} = $_[1];
		693
		694	eval {
		695	local $SIG{__DIE__};
		696	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		697	if $_[0]{fh};
		698	};
		699	}
		700
		701	=item $handle->keepalive ($boolean)
		702
		703	Enables or disables the C<keepalive> setting (see constructor argument of
		704	the same name for details).
		705
		706	=cut
		707
		708	sub keepalive {
		709	$_[0]{keepalive} = $_[1];
		710
		711	eval {
		712	local $SIG{__DIE__};
		713	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		714	if $_[0]{fh};
		715	};
		716	}
		717
		718	=item $handle->on_starttls ($cb)
		719
		720	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		721
		722	=cut
		723
		724	sub on_starttls {
		725	$_[0]{on_starttls} = $_[1];
		726	}
		727
		728	=item $handle->on_stoptls ($cb)
		729
		730	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		731
		732	=cut
		733
312	sub on_timeout {	734	sub on_stoptls {
313	$_[0]{on_timeout} = $_[1];	735	$_[0]{on_stoptls} = $_[1];
		736	}
		737
		738	=item $handle->rbuf_max ($max_octets)
		739
		740	Configures the C<rbuf_max> setting (C<undef> disables it).
		741
		742	=cut
		743
		744	sub rbuf_max {
		745	$_[0]{rbuf_max} = $_[1];
314	}	746	}
315		747
316	#############################################################################	748	#############################################################################
317		749
318	=item $handle->timeout ($seconds)	750	=item $handle->timeout ($seconds)
319		751
		752	=item $handle->rtimeout ($seconds)
		753
		754	=item $handle->wtimeout ($seconds)
		755
320	Configures (or disables) the inactivity timeout.	756	Configures (or disables) the inactivity timeout.
321		757
322	=cut	758	=item $handle->timeout_reset
323		759
324	sub timeout {	760	=item $handle->rtimeout_reset
		761
		762	=item $handle->wtimeout_reset
		763
		764	Reset the activity timeout, as if data was received or sent.
		765
		766	These methods are cheap to call.
		767
		768	=cut
		769
		770	for my $dir ("", "r", "w") {
		771	my $timeout = "${dir}timeout";
		772	my $tw = "_${dir}tw";
		773	my $on_timeout = "on_${dir}timeout";
		774	my $activity = "_${dir}activity";
		775	my $cb;
		776
		777	*$on_timeout = sub {
		778	$_[0]{$on_timeout} = $_[1];
		779	};
		780
		781	*$timeout = sub {
325	my ($self, $timeout) = @_;	782	my ($self, $new_value) = @_;
326		783
		784	$new_value >= 0
		785	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		786
327	$self->{timeout} = $timeout;	787	$self->{$timeout} = $new_value;
328	$self->_timeout;	788	delete $self->{$tw}; &$cb;
329	}	789	};
330		790
		791	*{"${dir}timeout_reset"} = sub {
		792	$_[0]{$activity} = AE::now;
		793	};
		794
		795	# main workhorse:
331	# reset the timeout watcher, as neccessary	796	# reset the timeout watcher, as neccessary
332	# also check for time-outs	797	# also check for time-outs
333	sub _timeout {	798	$cb = sub {
334	my ($self) = @_;	799	my ($self) = @_;
335		800
336	if ($self->{timeout}) {	801	if ($self->{$timeout} && $self->{fh}) {
337	my $NOW = AnyEvent->now;	802	my $NOW = AE::now;
338		803
339	# when would the timeout trigger?	804	# when would the timeout trigger?
340	my $after = $self->{_activity} + $self->{timeout} - $NOW;	805	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
341		806
342	# now or in the past already?	807	# now or in the past already?
343	if ($after <= 0) {	808	if ($after <= 0) {
344	$self->{_activity} = $NOW;	809	$self->{$activity} = $NOW;
345		810
346	if ($self->{on_timeout}) {	811	if ($self->{$on_timeout}) {
347	$self->{on_timeout}($self);	812	$self->{$on_timeout}($self);
348	} else {	813	} else {
349	$self->_error (&Errno::ETIMEDOUT);	814	$self->_error (Errno::ETIMEDOUT);
		815	}
		816
		817	# callback could have changed timeout value, optimise
		818	return unless $self->{$timeout};
		819
		820	# calculate new after
		821	$after = $self->{$timeout};
350	}	822	}
351		823
352	# callback could have changed timeout value, optimise	824	Scalar::Util::weaken $self;
353	return unless $self->{timeout};	825	return unless $self; # ->error could have destroyed $self
354		826
355	# calculate new after	827	$self->{$tw} ||= AE::timer $after, 0, sub {
356	$after = $self->{timeout};	828	delete $self->{$tw};
		829	$cb->($self);
		830	};
		831	} else {
		832	delete $self->{$tw};
357	}	833	}
358
359	Scalar::Util::weaken $self;
360	return unless $self; # ->error could have destroyed $self
361
362	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
363	delete $self->{_tw};
364	$self->_timeout;
365	});
366	} else {
367	delete $self->{_tw};
368	}	834	}
369	}	835	}
370		836
371	#############################################################################	837	#############################################################################
372		838
…		…
388	=item $handle->on_drain ($cb)	854	=item $handle->on_drain ($cb)
389		855
390	Sets the C<on_drain> callback or clears it (see the description of	856	Sets the C<on_drain> callback or clears it (see the description of
391	C<on_drain> in the constructor).	857	C<on_drain> in the constructor).
392		858
		859	This method may invoke callbacks (and therefore the handle might be
		860	destroyed after it returns).
		861
393	=cut	862	=cut
394		863
395	sub on_drain {	864	sub on_drain {
396	my ($self, $cb) = @_;	865	my ($self, $cb) = @_;
397		866
398	$self->{on_drain} = $cb;	867	$self->{on_drain} = $cb;
399		868
400	$cb->($self)	869	$cb->($self)
401	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	870	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
402	}	871	}
403		872
404	=item $handle->push_write ($data)	873	=item $handle->push_write ($data)
405		874
406	Queues the given scalar to be written. You can push as much data as you	875	Queues the given scalar to be written. You can push as much data as you
407	want (only limited by the available memory), as C<AnyEvent::Handle>	876	want (only limited by the available memory), as C<AnyEvent::Handle>
408	buffers it independently of the kernel.	877	buffers it independently of the kernel.
409		878
		879	This method may invoke callbacks (and therefore the handle might be
		880	destroyed after it returns).
		881
410	=cut	882	=cut
411		883
412	sub _drain_wbuf {	884	sub _drain_wbuf {
413	my ($self) = @_;	885	my ($self) = @_;
414		886
…		…
417	Scalar::Util::weaken $self;	889	Scalar::Util::weaken $self;
418		890
419	my $cb = sub {	891	my $cb = sub {
420	my $len = syswrite $self->{fh}, $self->{wbuf};	892	my $len = syswrite $self->{fh}, $self->{wbuf};
421		893
422	if ($len >= 0) {	894	if (defined $len) {
423	substr $self->{wbuf}, 0, $len, "";	895	substr $self->{wbuf}, 0, $len, "";
424		896
425	$self->{_activity} = AnyEvent->now;	897	$self->{_activity} = $self->{_wactivity} = AE::now;
426		898
427	$self->{on_drain}($self)	899	$self->{on_drain}($self)
428	if $self->{low_water_mark} >= length $self->{wbuf}	900	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
429	&& $self->{on_drain};	901	&& $self->{on_drain};
430		902
431	delete $self->{_ww} unless length $self->{wbuf};	903	delete $self->{_ww} unless length $self->{wbuf};
432	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	904	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
433	$self->_error ($!, 1);	905	$self->_error ($!, 1);
434	}	906	}
435	};	907	};
436		908
437	# try to write data immediately	909	# try to write data immediately
438	$cb->();	910	$cb->() unless $self->{autocork};
439		911
440	# if still data left in wbuf, we need to poll	912	# if still data left in wbuf, we need to poll
441	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	913	$self->{_ww} = AE::io $self->{fh}, 1, $cb
442	if length $self->{wbuf};	914	if length $self->{wbuf};
443	};	915	};
444	}	916	}
445		917
446	our %WH;	918	our %WH;
447		919
		920	# deprecated
448	sub register_write_type($$) {	921	sub register_write_type($$) {
449	$WH{$_[0]} = $_[1];	922	$WH{$_[0]} = $_[1];
450	}	923	}
451		924
452	sub push_write {	925	sub push_write {
453	my $self = shift;	926	my $self = shift;
454		927
455	if (@_ > 1) {	928	if (@_ > 1) {
456	my $type = shift;	929	my $type = shift;
457		930
		931	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
458	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	932	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
459	->($self, @_);	933	->($self, @_);
460	}	934	}
461		935
		936	# we downgrade here to avoid hard-to-track-down bugs,
		937	# and diagnose the problem earlier and better.
		938
462	if ($self->{filter_w}) {	939	if ($self->{tls}) {
463	$self->{filter_w}($self, \$_[0]);	940	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
		941	&_dotls ($self) if $self->{fh};
464	} else {	942	} else {
465	$self->{wbuf} .= $_[0];	943	utf8::downgrade $self->{wbuf} .= $_[0];
466	$self->_drain_wbuf;	944	$self->_drain_wbuf if $self->{fh};
467	}	945	}
468	}	946	}
469		947
470	=item $handle->push_write (type => @args)	948	=item $handle->push_write (type => @args)
471		949
472	Instead of formatting your data yourself, you can also let this module do	950	Instead of formatting your data yourself, you can also let this module
473	the job by specifying a type and type-specific arguments.	951	do the job by specifying a type and type-specific arguments. You
		952	can also specify the (fully qualified) name of a package, in which
		953	case AnyEvent tries to load the package and then expects to find the
		954	C<anyevent_write_type> function inside (see "custom write types", below).
474		955
475	Predefined types are (if you have ideas for additional types, feel free to	956	Predefined types are (if you have ideas for additional types, feel free to
476	drop by and tell us):	957	drop by and tell us):
477		958
478	=over 4	959	=over 4
…		…
485	=cut	966	=cut
486		967
487	register_write_type netstring => sub {	968	register_write_type netstring => sub {
488	my ($self, $string) = @_;	969	my ($self, $string) = @_;
489		970
490	sprintf "%d:%s,", (length $string), $string	971	(length $string) . ":$string,"
491	};	972	};
492		973
493	=item packstring => $format, $data	974	=item packstring => $format, $data
494		975
495	An octet string prefixed with an encoded length. The encoding C<$format>	976	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
535	Other languages could read single lines terminated by a newline and pass	1016	Other languages could read single lines terminated by a newline and pass
536	this line into their JSON decoder of choice.	1017	this line into their JSON decoder of choice.
537		1018
538	=cut	1019	=cut
539		1020
		1021	sub json_coder() {
		1022	eval { require JSON::XS; JSON::XS->new->utf8 }
		1023	|| do { require JSON; JSON->new->utf8 }
		1024	}
		1025
540	register_write_type json => sub {	1026	register_write_type json => sub {
541	my ($self, $ref) = @_;	1027	my ($self, $ref) = @_;
542		1028
543	require JSON;	1029	my $json = $self->{json} ||= json_coder;
544		1030
545	$self->{json} ? $self->{json}->encode ($ref)	1031	$json->encode ($ref)
546	: JSON::encode_json ($ref)
547	};	1032	};
548		1033
549	=item storable => $reference	1034	=item storable => $reference
550		1035
551	Freezes the given reference using L<Storable> and writes it to the	1036	Freezes the given reference using L<Storable> and writes it to the
…		…
561	pack "w/a*", Storable::nfreeze ($ref)	1046	pack "w/a*", Storable::nfreeze ($ref)
562	};	1047	};
563		1048
564	=back	1049	=back
565		1050
566	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1051	=item $handle->push_shutdown
567		1052
568	This function (not method) lets you add your own types to C<push_write>.	1053	Sometimes you know you want to close the socket after writing your data
		1054	before it was actually written. One way to do that is to replace your
		1055	C<on_drain> handler by a callback that shuts down the socket (and set
		1056	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1057	replaces the C<on_drain> callback with:
		1058
		1059	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1060
		1061	This simply shuts down the write side and signals an EOF condition to the
		1062	the peer.
		1063
		1064	You can rely on the normal read queue and C<on_eof> handling
		1065	afterwards. This is the cleanest way to close a connection.
		1066
		1067	This method may invoke callbacks (and therefore the handle might be
		1068	destroyed after it returns).
		1069
		1070	=cut
		1071
		1072	sub push_shutdown {
		1073	my ($self) = @_;
		1074
		1075	delete $self->{low_water_mark};
		1076	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1077	}
		1078
		1079	=item custom write types - Package::anyevent_write_type $handle, @args
		1080
		1081	Instead of one of the predefined types, you can also specify the name of
		1082	a package. AnyEvent will try to load the package and then expects to find
		1083	a function named C<anyevent_write_type> inside. If it isn't found, it
		1084	progressively tries to load the parent package until it either finds the
		1085	function (good) or runs out of packages (bad).
		1086
569	Whenever the given C<type> is used, C<push_write> will invoke the code	1087	Whenever the given C<type> is used, C<push_write> will the function with
570	reference with the handle object and the remaining arguments.	1088	the handle object and the remaining arguments.
571		1089
572	The code reference is supposed to return a single octet string that will	1090	The function is supposed to return a single octet string that will be
573	be appended to the write buffer.	1091	appended to the write buffer, so you cna mentally treat this function as a
		1092	"arguments to on-the-wire-format" converter.
574		1093
575	Note that this is a function, and all types registered this way will be	1094	Example: implement a custom write type C<join> that joins the remaining
576	global, so try to use unique names.	1095	arguments using the first one.
		1096
		1097	$handle->push_write (My::Type => " ", 1,2,3);
		1098
		1099	# uses the following package, which can be defined in the "My::Type" or in
		1100	# the "My" modules to be auto-loaded, or just about anywhere when the
		1101	# My::Type::anyevent_write_type is defined before invoking it.
		1102
		1103	package My::Type;
		1104
		1105	sub anyevent_write_type {
		1106	my ($handle, $delim, @args) = @_;
		1107
		1108	join $delim, @args
		1109	}
577		1110
578	=cut	1111	=cut
579		1112
580	#############################################################################	1113	#############################################################################
581		1114
…		…
590	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1123	ways, the "simple" way, using only C<on_read> and the "complex" way, using
591	a queue.	1124	a queue.
592		1125
593	In the simple case, you just install an C<on_read> callback and whenever	1126	In the simple case, you just install an C<on_read> callback and whenever
594	new data arrives, it will be called. You can then remove some data (if	1127	new data arrives, it will be called. You can then remove some data (if
595	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	1128	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
596	or not.	1129	leave the data there if you want to accumulate more (e.g. when only a
		1130	partial message has been received so far), or change the read queue with
		1131	e.g. C<push_read>.
597		1132
598	In the more complex case, you want to queue multiple callbacks. In this	1133	In the more complex case, you want to queue multiple callbacks. In this
599	case, AnyEvent::Handle will call the first queued callback each time new	1134	case, AnyEvent::Handle will call the first queued callback each time new
600	data arrives (also the first time it is queued) and removes it when it has	1135	data arrives (also the first time it is queued) and remove it when it has
601	done its job (see C<push_read>, below).	1136	done its job (see C<push_read>, below).
602		1137
603	This way you can, for example, push three line-reads, followed by reading	1138	This way you can, for example, push three line-reads, followed by reading
604	a chunk of data, and AnyEvent::Handle will execute them in order.	1139	a chunk of data, and AnyEvent::Handle will execute them in order.
605		1140
…		…
619	# handle xml	1154	# handle xml
620	});	1155	});
621	});	1156	});
622	});	1157	});
623		1158
624	Example 2: Implement a client for a protocol that replies either with	1159	Example 2: Implement a client for a protocol that replies either with "OK"
625	"OK" and another line or "ERROR" for one request, and 64 bytes for the	1160	and another line or "ERROR" for the first request that is sent, and 64
626	second request. Due tot he availability of a full queue, we can just	1161	bytes for the second request. Due to the availability of a queue, we can
627	pipeline sending both requests and manipulate the queue as necessary in	1162	just pipeline sending both requests and manipulate the queue as necessary
628	the callbacks:	1163	in the callbacks.
629		1164
630	# request one	1165	When the first callback is called and sees an "OK" response, it will
		1166	C<unshift> another line-read. This line-read will be queued I<before> the
		1167	64-byte chunk callback.
		1168
		1169	# request one, returns either "OK + extra line" or "ERROR"
631	$handle->push_write ("request 1\015\012");	1170	$handle->push_write ("request 1\015\012");
632		1171
633	# we expect "ERROR" or "OK" as response, so push a line read	1172	# we expect "ERROR" or "OK" as response, so push a line read
634	$handle->push_read (line => sub {	1173	$handle->push_read (line => sub {
635	# if we got an "OK", we have to _prepend_ another line,	1174	# if we got an "OK", we have to _prepend_ another line,
…		…
642	...	1181	...
643	});	1182	});
644	}	1183	}
645	});	1184	});
646		1185
647	# request two	1186	# request two, simply returns 64 octets
648	$handle->push_write ("request 2\015\012");	1187	$handle->push_write ("request 2\015\012");
649		1188
650	# simply read 64 bytes, always	1189	# simply read 64 bytes, always
651	$handle->push_read (chunk => 64, sub {	1190	$handle->push_read (chunk => 64, sub {
652	my $response = $_[1];	1191	my $response = $_[1];
…		…
658	=cut	1197	=cut
659		1198
660	sub _drain_rbuf {	1199	sub _drain_rbuf {
661	my ($self) = @_;	1200	my ($self) = @_;
662		1201
		1202	# avoid recursion
		1203	return if $self->{_skip_drain_rbuf};
663	local $self->{_in_drain} = 1;	1204	local $self->{_skip_drain_rbuf} = 1;
664
665	if (
666	defined $self->{rbuf_max}
667	&& $self->{rbuf_max} < length $self->{rbuf}
668	) {
669	return $self->_error (&Errno::ENOSPC, 1);
670	}
671		1205
672	while () {	1206	while () {
673	no strict 'refs';	1207	# we need to use a separate tls read buffer, as we must not receive data while
		1208	# we are draining the buffer, and this can only happen with TLS.
		1209	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1210	if exists $self->{_tls_rbuf};
674		1211
675	my $len = length $self->{rbuf};	1212	my $len = length $self->{rbuf};
676		1213
677	if (my $cb = shift @{ $self->{_queue} }) {	1214	if (my $cb = shift @{ $self->{_queue} }) {
678	unless ($cb->($self)) {	1215	unless ($cb->($self)) {
679	if ($self->{_eof}) {	1216	# no progress can be made
680	# no progress can be made (not enough data and no data forthcoming)	1217	# (not enough data and no data forthcoming)
681	$self->_error (&Errno::EPIPE, 1), last;	1218	$self->_error (Errno::EPIPE, 1), return
682	}	1219	if $self->{_eof};
683		1220
684	unshift @{ $self->{_queue} }, $cb;	1221	unshift @{ $self->{_queue} }, $cb;
685	last;	1222	last;
686	}	1223	}
687	} elsif ($self->{on_read}) {	1224	} elsif ($self->{on_read}) {
…		…
694	&& !@{ $self->{_queue} } # and the queue is still empty	1231	&& !@{ $self->{_queue} } # and the queue is still empty
695	&& $self->{on_read} # but we still have on_read	1232	&& $self->{on_read} # but we still have on_read
696	) {	1233	) {
697	# no further data will arrive	1234	# no further data will arrive
698	# so no progress can be made	1235	# so no progress can be made
699	$self->_error (&Errno::EPIPE, 1), last	1236	$self->_error (Errno::EPIPE, 1), return
700	if $self->{_eof};	1237	if $self->{_eof};
701		1238
702	last; # more data might arrive	1239	last; # more data might arrive
703	}	1240	}
704	} else {	1241	} else {
705	# read side becomes idle	1242	# read side becomes idle
706	delete $self->{_rw};	1243	delete $self->{_rw} unless $self->{tls};
707	last;	1244	last;
708	}	1245	}
709	}	1246	}
710		1247
		1248	if ($self->{_eof}) {
		1249	$self->{on_eof}
711	$self->{on_eof}($self)	1250	? $self->{on_eof}($self)
712	if $self->{_eof} && $self->{on_eof};	1251	: $self->_error (0, 1, "Unexpected end-of-file");
		1252
		1253	return;
		1254	}
		1255
		1256	if (
		1257	defined $self->{rbuf_max}
		1258	&& $self->{rbuf_max} < length $self->{rbuf}
		1259	) {
		1260	$self->_error (Errno::ENOSPC, 1), return;
		1261	}
713		1262
714	# may need to restart read watcher	1263	# may need to restart read watcher
715	unless ($self->{_rw}) {	1264	unless ($self->{_rw}) {
716	$self->start_read	1265	$self->start_read
717	if $self->{on_read} || @{ $self->{_queue} };	1266	if $self->{on_read} || @{ $self->{_queue} };
…		…
722		1271
723	This replaces the currently set C<on_read> callback, or clears it (when	1272	This replaces the currently set C<on_read> callback, or clears it (when
724	the new callback is C<undef>). See the description of C<on_read> in the	1273	the new callback is C<undef>). See the description of C<on_read> in the
725	constructor.	1274	constructor.
726		1275
		1276	This method may invoke callbacks (and therefore the handle might be
		1277	destroyed after it returns).
		1278
727	=cut	1279	=cut
728		1280
729	sub on_read {	1281	sub on_read {
730	my ($self, $cb) = @_;	1282	my ($self, $cb) = @_;
731		1283
732	$self->{on_read} = $cb;	1284	$self->{on_read} = $cb;
733	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1285	$self->_drain_rbuf if $cb;
734	}	1286	}
735		1287
736	=item $handle->rbuf	1288	=item $handle->rbuf
737		1289
738	Returns the read buffer (as a modifiable lvalue).	1290	Returns the read buffer (as a modifiable lvalue). You can also access the
		1291	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1292	much faster, and no less clean).
739		1293
740	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1294	The only operation allowed on the read buffer (apart from looking at it)
741	you want.	1295	is removing data from its beginning. Otherwise modifying or appending to
		1296	it is not allowed and will lead to hard-to-track-down bugs.
742		1297
743	NOTE: The read buffer should only be used or modified if the C<on_read>,	1298	NOTE: The read buffer should only be used or modified in the C<on_read>
744	C<push_read> or C<unshift_read> methods are used. The other read methods	1299	callback or when C<push_read> or C<unshift_read> are used with a single
745	automatically manage the read buffer.	1300	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1301	will manage the read buffer on their own.
746		1302
747	=cut	1303	=cut
748		1304
749	sub rbuf : lvalue {	1305	sub rbuf : lvalue {
750	$_[0]{rbuf}	1306	$_[0]{rbuf}
…		…
767		1323
768	If enough data was available, then the callback must remove all data it is	1324	If enough data was available, then the callback must remove all data it is
769	interested in (which can be none at all) and return a true value. After returning	1325	interested in (which can be none at all) and return a true value. After returning
770	true, it will be removed from the queue.	1326	true, it will be removed from the queue.
771		1327
		1328	These methods may invoke callbacks (and therefore the handle might be
		1329	destroyed after it returns).
		1330
772	=cut	1331	=cut
773		1332
774	our %RH;	1333	our %RH;
775		1334
776	sub register_read_type($$) {	1335	sub register_read_type($$) {
…		…
782	my $cb = pop;	1341	my $cb = pop;
783		1342
784	if (@_) {	1343	if (@_) {
785	my $type = shift;	1344	my $type = shift;
786		1345
		1346	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
787	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1347	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
788	->($self, $cb, @_);	1348	->($self, $cb, @_);
789	}	1349	}
790		1350
791	push @{ $self->{_queue} }, $cb;	1351	push @{ $self->{_queue} }, $cb;
792	$self->_drain_rbuf unless $self->{_in_drain};	1352	$self->_drain_rbuf;
793	}	1353	}
794		1354
795	sub unshift_read {	1355	sub unshift_read {
796	my $self = shift;	1356	my $self = shift;
797	my $cb = pop;	1357	my $cb = pop;
798		1358
799	if (@_) {	1359	if (@_) {
800	my $type = shift;	1360	my $type = shift;
801		1361
		1362	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
802	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1363	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
803	->($self, $cb, @_);	1364	->($self, $cb, @_);
804	}	1365	}
805		1366
806
807	unshift @{ $self->{_queue} }, $cb;	1367	unshift @{ $self->{_queue} }, $cb;
808	$self->_drain_rbuf unless $self->{_in_drain};	1368	$self->_drain_rbuf;
809	}	1369	}
810		1370
811	=item $handle->push_read (type => @args, $cb)	1371	=item $handle->push_read (type => @args, $cb)
812		1372
813	=item $handle->unshift_read (type => @args, $cb)	1373	=item $handle->unshift_read (type => @args, $cb)
814		1374
815	Instead of providing a callback that parses the data itself you can chose	1375	Instead of providing a callback that parses the data itself you can chose
816	between a number of predefined parsing formats, for chunks of data, lines	1376	between a number of predefined parsing formats, for chunks of data, lines
817	etc.	1377	etc. You can also specify the (fully qualified) name of a package, in
		1378	which case AnyEvent tries to load the package and then expects to find the
		1379	C<anyevent_read_type> function inside (see "custom read types", below).
818		1380
819	Predefined types are (if you have ideas for additional types, feel free to	1381	Predefined types are (if you have ideas for additional types, feel free to
820	drop by and tell us):	1382	drop by and tell us):
821		1383
822	=over 4	1384	=over 4
…		…
843	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1405	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
844	1	1406	1
845	}	1407	}
846	};	1408	};
847		1409
848	# compatibility with older API
849	sub push_read_chunk {
850	$_[0]->push_read (chunk => $_[1], $_[2]);
851	}
852
853	sub unshift_read_chunk {
854	$_[0]->unshift_read (chunk => $_[1], $_[2]);
855	}
856
857	=item line => [$eol, ]$cb->($handle, $line, $eol)	1410	=item line => [$eol, ]$cb->($handle, $line, $eol)
858		1411
859	The callback will be called only once a full line (including the end of	1412	The callback will be called only once a full line (including the end of
860	line marker, C<$eol>) has been read. This line (excluding the end of line	1413	line marker, C<$eol>) has been read. This line (excluding the end of line
861	marker) will be passed to the callback as second argument (C<$line>), and	1414	marker) will be passed to the callback as second argument (C<$line>), and
…		…
876	=cut	1429	=cut
877		1430
878	register_read_type line => sub {	1431	register_read_type line => sub {
879	my ($self, $cb, $eol) = @_;	1432	my ($self, $cb, $eol) = @_;
880		1433
881	$eol = qr|(\015?\012)| if @_ < 3;	1434	if (@_ < 3) {
		1435	# this is more than twice as fast as the generic code below
		1436	sub {
		1437	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
		1438
		1439	$cb->($_[0], $1, $2);
		1440	1
		1441	}
		1442	} else {
882	$eol = quotemeta $eol unless ref $eol;	1443	$eol = quotemeta $eol unless ref $eol;
883	$eol = qr|^(.*?)($eol)|s;	1444	$eol = qr|^(.*?)($eol)|s;
884		1445
885	sub {	1446	sub {
886	$_[0]{rbuf} =~ s/$eol// or return;	1447	$_[0]{rbuf} =~ s/$eol// or return;
887		1448
888	$cb->($_[0], $1, $2);	1449	$cb->($_[0], $1, $2);
		1450	1
889	1	1451	}
890	}	1452	}
891	};	1453	};
892
893	# compatibility with older API
894	sub push_read_line {
895	my $self = shift;
896	$self->push_read (line => @_);
897	}
898
899	sub unshift_read_line {
900	my $self = shift;
901	$self->unshift_read (line => @_);
902	}
903		1454
904	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1455	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
905		1456
906	Makes a regex match against the regex object C<$accept> and returns	1457	Makes a regex match against the regex object C<$accept> and returns
907	everything up to and including the match.	1458	everything up to and including the match.
…		…
925	the receive buffer when neither C<$accept> nor C<$reject> match,	1476	the receive buffer when neither C<$accept> nor C<$reject> match,
926	and everything preceding and including the match will be accepted	1477	and everything preceding and including the match will be accepted
927	unconditionally. This is useful to skip large amounts of data that you	1478	unconditionally. This is useful to skip large amounts of data that you
928	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1479	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
929	have to start matching from the beginning. This is purely an optimisation	1480	have to start matching from the beginning. This is purely an optimisation
930	and is usually worth only when you expect more than a few kilobytes.	1481	and is usually worth it only when you expect more than a few kilobytes.
931		1482
932	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1483	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
933	expect the header to be very large (it isn't in practise, but...), we use	1484	expect the header to be very large (it isn't in practice, but...), we use
934	a skip regex to skip initial portions. The skip regex is tricky in that	1485	a skip regex to skip initial portions. The skip regex is tricky in that
935	it only accepts something not ending in either \015 or \012, as these are	1486	it only accepts something not ending in either \015 or \012, as these are
936	required for the accept regex.	1487	required for the accept regex.
937		1488
938	$handle->push_read (regex =>	1489	$handle->push_read (regex =>
…		…
957	return 1;	1508	return 1;
958	}	1509	}
959		1510
960	# reject	1511	# reject
961	if ($reject && $$rbuf =~ $reject) {	1512	if ($reject && $$rbuf =~ $reject) {
962	$self->_error (&Errno::EBADMSG);	1513	$self->_error (Errno::EBADMSG);
963	}	1514	}
964		1515
965	# skip	1516	# skip
966	if ($skip && $$rbuf =~ $skip) {	1517	if ($skip && $$rbuf =~ $skip) {
967	$data .= substr $$rbuf, 0, $+[0], "";	1518	$data .= substr $$rbuf, 0, $+[0], "";
…		…
983	my ($self, $cb) = @_;	1534	my ($self, $cb) = @_;
984		1535
985	sub {	1536	sub {
986	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1537	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
987	if ($_[0]{rbuf} =~ /[^0-9]/) {	1538	if ($_[0]{rbuf} =~ /[^0-9]/) {
988	$self->_error (&Errno::EBADMSG);	1539	$self->_error (Errno::EBADMSG);
989	}	1540	}
990	return;	1541	return;
991	}	1542	}
992		1543
993	my $len = $1;	1544	my $len = $1;
…		…
996	my $string = $_[1];	1547	my $string = $_[1];
997	$_[0]->unshift_read (chunk => 1, sub {	1548	$_[0]->unshift_read (chunk => 1, sub {
998	if ($_[1] eq ",") {	1549	if ($_[1] eq ",") {
999	$cb->($_[0], $string);	1550	$cb->($_[0], $string);
1000	} else {	1551	} else {
1001	$self->_error (&Errno::EBADMSG);	1552	$self->_error (Errno::EBADMSG);
1002	}	1553	}
1003	});	1554	});
1004	});	1555	});
1005		1556
1006	1	1557	1
…		…
1012	An octet string prefixed with an encoded length. The encoding C<$format>	1563	An octet string prefixed with an encoded length. The encoding C<$format>
1013	uses the same format as a Perl C<pack> format, but must specify a single	1564	uses the same format as a Perl C<pack> format, but must specify a single
1014	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1565	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1015	optional C<!>, C<< < >> or C<< > >> modifier).	1566	optional C<!>, C<< < >> or C<< > >> modifier).
1016		1567
1017	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1568	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1569	EPP uses a prefix of C<N> (4 octtes).
1018		1570
1019	Example: read a block of data prefixed by its length in BER-encoded	1571	Example: read a block of data prefixed by its length in BER-encoded
1020	format (very efficient).	1572	format (very efficient).
1021		1573
1022	$handle->push_read (packstring => "w", sub {	1574	$handle->push_read (packstring => "w", sub {
…		…
1028	register_read_type packstring => sub {	1580	register_read_type packstring => sub {
1029	my ($self, $cb, $format) = @_;	1581	my ($self, $cb, $format) = @_;
1030		1582
1031	sub {	1583	sub {
1032	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1584	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1033	defined (my $len = eval { unpack $format, $_[0]->{rbuf} })	1585	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
1034	or return;	1586	or return;
1035		1587
		1588	$format = length pack $format, $len;
		1589
		1590	# bypass unshift if we already have the remaining chunk
		1591	if ($format + $len <= length $_[0]{rbuf}) {
		1592	my $data = substr $_[0]{rbuf}, $format, $len;
		1593	substr $_[0]{rbuf}, 0, $format + $len, "";
		1594	$cb->($_[0], $data);
		1595	} else {
1036	# remove prefix	1596	# remove prefix
1037	substr $_[0]->{rbuf}, 0, (length pack $format, $len), "";	1597	substr $_[0]{rbuf}, 0, $format, "";
1038		1598
1039	# read rest	1599	# read remaining chunk
1040	$_[0]->unshift_read (chunk => $len, $cb);	1600	$_[0]->unshift_read (chunk => $len, $cb);
		1601	}
1041		1602
1042	1	1603	1
1043	}	1604	}
1044	};	1605	};
1045		1606
1046	=item json => $cb->($handle, $hash_or_arrayref)	1607	=item json => $cb->($handle, $hash_or_arrayref)
1047		1608
1048	Reads a JSON object or array, decodes it and passes it to the callback.	1609	Reads a JSON object or array, decodes it and passes it to the
		1610	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1049		1611
1050	If a C<json> object was passed to the constructor, then that will be used	1612	If a C<json> object was passed to the constructor, then that will be used
1051	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1613	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1052		1614
1053	This read type uses the incremental parser available with JSON version	1615	This read type uses the incremental parser available with JSON version
…		…
1062	=cut	1624	=cut
1063		1625
1064	register_read_type json => sub {	1626	register_read_type json => sub {
1065	my ($self, $cb) = @_;	1627	my ($self, $cb) = @_;
1066		1628
1067	require JSON;	1629	my $json = $self->{json} ||= json_coder;
1068		1630
1069	my $data;	1631	my $data;
1070	my $rbuf = \$self->{rbuf};	1632	my $rbuf = \$self->{rbuf};
1071		1633
1072	my $json = $self->{json} ||= JSON->new->utf8;
1073
1074	sub {	1634	sub {
1075	my $ref = $json->incr_parse ($self->{rbuf});	1635	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1076		1636
1077	if ($ref) {	1637	if ($ref) {
1078	$self->{rbuf} = $json->incr_text;	1638	$self->{rbuf} = $json->incr_text;
1079	$json->incr_text = "";	1639	$json->incr_text = "";
1080	$cb->($self, $ref);	1640	$cb->($self, $ref);
1081		1641
1082	1	1642	1
		1643	} elsif ($@) {
		1644	# error case
		1645	$json->incr_skip;
		1646
		1647	$self->{rbuf} = $json->incr_text;
		1648	$json->incr_text = "";
		1649
		1650	$self->_error (Errno::EBADMSG);
		1651
		1652	()
1083	} else {	1653	} else {
1084	$self->{rbuf} = "";	1654	$self->{rbuf} = "";
		1655
1085	()	1656	()
1086	}	1657	}
1087	}	1658	}
1088	};	1659	};
1089		1660
…		…
1102		1673
1103	require Storable;	1674	require Storable;
1104		1675
1105	sub {	1676	sub {
1106	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1677	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1107	defined (my $len = eval { unpack "w", $_[0]->{rbuf} })	1678	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
1108	or return;	1679	or return;
1109		1680
		1681	my $format = length pack "w", $len;
		1682
		1683	# bypass unshift if we already have the remaining chunk
		1684	if ($format + $len <= length $_[0]{rbuf}) {
		1685	my $data = substr $_[0]{rbuf}, $format, $len;
		1686	substr $_[0]{rbuf}, 0, $format + $len, "";
		1687	$cb->($_[0], Storable::thaw ($data));
		1688	} else {
1110	# remove prefix	1689	# remove prefix
1111	substr $_[0]->{rbuf}, 0, (length pack "w", $len), "";	1690	substr $_[0]{rbuf}, 0, $format, "";
1112		1691
1113	# read rest	1692	# read remaining chunk
1114	$_[0]->unshift_read (chunk => $len, sub {	1693	$_[0]->unshift_read (chunk => $len, sub {
1115	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1694	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1116	$cb->($_[0], $ref);	1695	$cb->($_[0], $ref);
1117	} else {	1696	} else {
1118	$self->_error (&Errno::EBADMSG);	1697	$self->_error (Errno::EBADMSG);
		1698	}
1119	}	1699	});
1120	});	1700	}
		1701
		1702	1
1121	}	1703	}
1122	};	1704	};
1123		1705
1124	=back	1706	=back
1125		1707
1126	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1708	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1127		1709
1128	This function (not method) lets you add your own types to C<push_read>.	1710	Instead of one of the predefined types, you can also specify the name
		1711	of a package. AnyEvent will try to load the package and then expects to
		1712	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1713	progressively tries to load the parent package until it either finds the
		1714	function (good) or runs out of packages (bad).
1129		1715
1130	Whenever the given C<type> is used, C<push_read> will invoke the code	1716	Whenever this type is used, C<push_read> will invoke the function with the
1131	reference with the handle object, the callback and the remaining	1717	handle object, the original callback and the remaining arguments.
1132	arguments.
1133		1718
1134	The code reference is supposed to return a callback (usually a closure)	1719	The function is supposed to return a callback (usually a closure) that
1135	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1720	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1721	mentally treat the function as a "configurable read type to read callback"
		1722	converter.
1136		1723
1137	It should invoke the passed callback when it is done reading (remember to	1724	It should invoke the original callback when it is done reading (remember
1138	pass C<$handle> as first argument as all other callbacks do that).	1725	to pass C<$handle> as first argument as all other callbacks do that,
		1726	although there is no strict requirement on this).
1139		1727
1140	Note that this is a function, and all types registered this way will be
1141	global, so try to use unique names.
1142
1143	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1728	For examples, see the source of this module (F<perldoc -m
1144	search for C<register_read_type>)).	1729	AnyEvent::Handle>, search for C<register_read_type>)).
1145		1730
1146	=item $handle->stop_read	1731	=item $handle->stop_read
1147		1732
1148	=item $handle->start_read	1733	=item $handle->start_read
1149		1734
…		…
1155	Note that AnyEvent::Handle will automatically C<start_read> for you when	1740	Note that AnyEvent::Handle will automatically C<start_read> for you when
1156	you change the C<on_read> callback or push/unshift a read callback, and it	1741	you change the C<on_read> callback or push/unshift a read callback, and it
1157	will automatically C<stop_read> for you when neither C<on_read> is set nor	1742	will automatically C<stop_read> for you when neither C<on_read> is set nor
1158	there are any read requests in the queue.	1743	there are any read requests in the queue.
1159		1744
		1745	These methods will have no effect when in TLS mode (as TLS doesn't support
		1746	half-duplex connections).
		1747
1160	=cut	1748	=cut
1161		1749
1162	sub stop_read {	1750	sub stop_read {
1163	my ($self) = @_;	1751	my ($self) = @_;
1164		1752
1165	delete $self->{_rw};	1753	delete $self->{_rw} unless $self->{tls};
1166	}	1754	}
1167		1755
1168	sub start_read {	1756	sub start_read {
1169	my ($self) = @_;	1757	my ($self) = @_;
1170		1758
1171	unless ($self->{_rw} || $self->{_eof}) {	1759	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1172	Scalar::Util::weaken $self;	1760	Scalar::Util::weaken $self;
1173		1761
1174	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1762	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1175	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1763	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1176	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1764	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1177		1765
1178	if ($len > 0) {	1766	if ($len > 0) {
1179	$self->{_activity} = AnyEvent->now;	1767	$self->{_activity} = $self->{_ractivity} = AE::now;
1180		1768
1181	$self->{filter_r}	1769	if ($self->{tls}) {
1182	? $self->{filter_r}($self, $rbuf)	1770	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1183	: $self->{_in_drain} || $self->_drain_rbuf;	1771
		1772	&_dotls ($self);
		1773	} else {
		1774	$self->_drain_rbuf;
		1775	}
		1776
		1777	if ($len == $self->{read_size}) {
		1778	$self->{read_size} *= 2;
		1779	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		1780	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		1781	}
1184		1782
1185	} elsif (defined $len) {	1783	} elsif (defined $len) {
1186	delete $self->{_rw};	1784	delete $self->{_rw};
1187	$self->{_eof} = 1;	1785	$self->{_eof} = 1;
1188	$self->_drain_rbuf unless $self->{_in_drain};	1786	$self->_drain_rbuf;
1189		1787
1190	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1788	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1191	return $self->_error ($!, 1);	1789	return $self->_error ($!, 1);
1192	}	1790	}
1193	});	1791	};
1194	}	1792	}
1195	}	1793	}
1196		1794
		1795	our $ERROR_SYSCALL;
		1796	our $ERROR_WANT_READ;
		1797
		1798	sub _tls_error {
		1799	my ($self, $err) = @_;
		1800
		1801	return $self->_error ($!, 1)
		1802	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1803
		1804	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1805
		1806	# reduce error string to look less scary
		1807	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1808
		1809	if ($self->{_on_starttls}) {
		1810	(delete $self->{_on_starttls})->($self, undef, $err);
		1811	&_freetls;
		1812	} else {
		1813	&_freetls;
		1814	$self->_error (Errno::EPROTO, 1, $err);
		1815	}
		1816	}
		1817
		1818	# poll the write BIO and send the data if applicable
		1819	# also decode read data if possible
		1820	# this is basiclaly our TLS state machine
		1821	# more efficient implementations are possible with openssl,
		1822	# but not with the buggy and incomplete Net::SSLeay.
1197	sub _dotls {	1823	sub _dotls {
1198	my ($self) = @_;	1824	my ($self) = @_;
1199		1825
1200	my $buf;	1826	my $tmp;
1201		1827
1202	if (length $self->{_tls_wbuf}) {	1828	if (length $self->{_tls_wbuf}) {
1203	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1829	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1204	substr $self->{_tls_wbuf}, 0, $len, "";	1830	substr $self->{_tls_wbuf}, 0, $tmp, "";
1205	}	1831	}
1206	}
1207		1832
		1833	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1834	return $self->_tls_error ($tmp)
		1835	if $tmp != $ERROR_WANT_READ
		1836	&& ($tmp != $ERROR_SYSCALL || $!);
		1837	}
		1838
		1839	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1840	unless (length $tmp) {
		1841	$self->{_on_starttls}
		1842	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1843	&_freetls;
		1844
		1845	if ($self->{on_stoptls}) {
		1846	$self->{on_stoptls}($self);
		1847	return;
		1848	} else {
		1849	# let's treat SSL-eof as we treat normal EOF
		1850	delete $self->{_rw};
		1851	$self->{_eof} = 1;
		1852	}
		1853	}
		1854
		1855	$self->{_tls_rbuf} .= $tmp;
		1856	$self->_drain_rbuf;
		1857	$self->{tls} or return; # tls session might have gone away in callback
		1858	}
		1859
		1860	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1861	return $self->_tls_error ($tmp)
		1862	if $tmp != $ERROR_WANT_READ
		1863	&& ($tmp != $ERROR_SYSCALL || $!);
		1864
1208	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1865	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1209	$self->{wbuf} .= $buf;	1866	$self->{wbuf} .= $tmp;
1210	$self->_drain_wbuf;	1867	$self->_drain_wbuf;
		1868	$self->{tls} or return; # tls session might have gone away in callback
1211	}	1869	}
1212		1870
1213	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1871	$self->{_on_starttls}
1214	if (length $buf) {	1872	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1215	$self->{rbuf} .= $buf;	1873	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1216	$self->_drain_rbuf unless $self->{_in_drain};
1217	} else {
1218	# let's treat SSL-eof as we treat normal EOF
1219	$self->{_eof} = 1;
1220	$self->_shutdown;
1221	return;
1222	}
1223	}
1224
1225	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1226
1227	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1228	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1229	return $self->_error ($!, 1);
1230	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1231	return $self->_error (&Errno::EIO, 1);
1232	}
1233
1234	# all others are fine for our purposes
1235	}
1236	}	1874	}
1237		1875
1238	=item $handle->starttls ($tls[, $tls_ctx])	1876	=item $handle->starttls ($tls[, $tls_ctx])
1239		1877
1240	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1878	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1241	object is created, you can also do that at a later time by calling	1879	object is created, you can also do that at a later time by calling
1242	C<starttls>.	1880	C<starttls>.
1243		1881
		1882	Starting TLS is currently an asynchronous operation - when you push some
		1883	write data and then call C<< ->starttls >> then TLS negotiation will start
		1884	immediately, after which the queued write data is then sent.
		1885
1244	The first argument is the same as the C<tls> constructor argument (either	1886	The first argument is the same as the C<tls> constructor argument (either
1245	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1887	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1246		1888
1247	The second argument is the optional C<Net::SSLeay::CTX> object that is	1889	The second argument is the optional C<AnyEvent::TLS> object that is used
1248	used when AnyEvent::Handle has to create its own TLS connection object.	1890	when AnyEvent::Handle has to create its own TLS connection object, or
		1891	a hash reference with C<< key => value >> pairs that will be used to
		1892	construct a new context.
1249		1893
1250	The TLS connection object will end up in C<< $handle->{tls} >> after this	1894	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1251	call and can be used or changed to your liking. Note that the handshake	1895	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1252	might have already started when this function returns.	1896	changed to your liking. Note that the handshake might have already started
		1897	when this function returns.
1253		1898
		1899	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1900	handshakes on the same stream. It is best to not attempt to use the
		1901	stream after stopping TLS.
		1902
		1903	This method may invoke callbacks (and therefore the handle might be
		1904	destroyed after it returns).
		1905
1254	=cut	1906	=cut
		1907
		1908	our %TLS_CACHE; #TODO not yet documented, should we?
1255		1909
1256	sub starttls {	1910	sub starttls {
1257	my ($self, $ssl, $ctx) = @_;	1911	my ($self, $tls, $ctx) = @_;
1258		1912
1259	$self->stoptls;	1913	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1914	if $self->{tls};
1260		1915
1261	if ($ssl eq "accept") {	1916	$self->{tls} = $tls;
1262	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1917	$self->{tls_ctx} = $ctx if @_ > 2;
1263	Net::SSLeay::set_accept_state ($ssl);	1918
1264	} elsif ($ssl eq "connect") {	1919	return unless $self->{fh};
1265	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1920
1266	Net::SSLeay::set_connect_state ($ssl);	1921	require Net::SSLeay;
		1922
		1923	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1924	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1925
		1926	$tls = delete $self->{tls};
		1927	$ctx = $self->{tls_ctx};
		1928
		1929	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1930
		1931	if ("HASH" eq ref $ctx) {
		1932	require AnyEvent::TLS;
		1933
		1934	if ($ctx->{cache}) {
		1935	my $key = $ctx+0;
		1936	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1937	} else {
		1938	$ctx = new AnyEvent::TLS %$ctx;
		1939	}
		1940	}
1267	}	1941
1268		1942	$self->{tls_ctx} = $ctx || TLS_CTX ();
1269	$self->{tls} = $ssl;	1943	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1270		1944
1271	# basically, this is deep magic (because SSL_read should have the same issues)	1945	# basically, this is deep magic (because SSL_read should have the same issues)
1272	# but the openssl maintainers basically said: "trust us, it just works".	1946	# but the openssl maintainers basically said: "trust us, it just works".
1273	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1947	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1274	# and mismaintained ssleay-module doesn't even offer them).	1948	# and mismaintained ssleay-module doesn't even offer them).
1275	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1949	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1950	#
		1951	# in short: this is a mess.
		1952	#
		1953	# note that we do not try to keep the length constant between writes as we are required to do.
		1954	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1955	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1956	# have identity issues in that area.
1276	Net::SSLeay::CTX_set_mode ($self->{tls},	1957	# Net::SSLeay::CTX_set_mode ($ssl,
1277	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1958	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1278	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1959	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1960	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1279		1961
1280	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1962	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1281	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1963	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1282		1964
		1965	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1966
1283	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1967	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1284		1968
1285	$self->{filter_w} = sub {	1969	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1286	$_[0]{_tls_wbuf} .= ${$_[1]};	1970	if $self->{on_starttls};
1287	&_dotls;	1971
1288	};	1972	&_dotls; # need to trigger the initial handshake
1289	$self->{filter_r} = sub {	1973	$self->start_read; # make sure we actually do read
1290	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1291	&_dotls;
1292	};
1293	}	1974	}
1294		1975
1295	=item $handle->stoptls	1976	=item $handle->stoptls
1296		1977
1297	Destroys the SSL connection, if any. Partial read or write data will be	1978	Shuts down the SSL connection - this makes a proper EOF handshake by
1298	lost.	1979	sending a close notify to the other side, but since OpenSSL doesn't
		1980	support non-blocking shut downs, it is not guaranteed that you can re-use
		1981	the stream afterwards.
		1982
		1983	This method may invoke callbacks (and therefore the handle might be
		1984	destroyed after it returns).
1299		1985
1300	=cut	1986	=cut
1301		1987
1302	sub stoptls {	1988	sub stoptls {
1303	my ($self) = @_;	1989	my ($self) = @_;
1304		1990
1305	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1991	if ($self->{tls} && $self->{fh}) {
		1992	Net::SSLeay::shutdown ($self->{tls});
1306		1993
1307	delete $self->{_rbio};	1994	&_dotls;
1308	delete $self->{_wbio};	1995
1309	delete $self->{_tls_wbuf};	1996	# # we don't give a shit. no, we do, but we can't. no...#d#
1310	delete $self->{filter_r};	1997	# # we, we... have to use openssl :/#d#
1311	delete $self->{filter_w};	1998	# &_freetls;#d#
		1999	}
		2000	}
		2001
		2002	sub _freetls {
		2003	my ($self) = @_;
		2004
		2005	return unless $self->{tls};
		2006
		2007	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2008	if $self->{tls} > 0;
		2009
		2010	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1312	}	2011	}
1313		2012
1314	sub DESTROY {	2013	sub DESTROY {
1315	my $self = shift;	2014	my ($self) = @_;
1316		2015
1317	$self->stoptls;	2016	&_freetls;
1318		2017
1319	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2018	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1320		2019
1321	if ($linger && length $self->{wbuf}) {	2020	if ($linger && length $self->{wbuf} && $self->{fh}) {
1322	my $fh = delete $self->{fh};	2021	my $fh = delete $self->{fh};
1323	my $wbuf = delete $self->{wbuf};	2022	my $wbuf = delete $self->{wbuf};
1324		2023
1325	my @linger;	2024	my @linger;
1326		2025
1327	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2026	push @linger, AE::io $fh, 1, sub {
1328	my $len = syswrite $fh, $wbuf, length $wbuf;	2027	my $len = syswrite $fh, $wbuf, length $wbuf;
1329		2028
1330	if ($len > 0) {	2029	if ($len > 0) {
1331	substr $wbuf, 0, $len, "";	2030	substr $wbuf, 0, $len, "";
1332	} else {	2031	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK)) {
1333	@linger = (); # end	2032	@linger = (); # end
1334	}	2033	}
1335	});	2034	};
1336	push @linger, AnyEvent->timer (after => $linger, cb => sub {	2035	push @linger, AE::timer $linger, 0, sub {
1337	@linger = ();	2036	@linger = ();
1338	});	2037	};
1339	}	2038	}
1340	}	2039	}
		2040
		2041	=item $handle->destroy
		2042
		2043	Shuts down the handle object as much as possible - this call ensures that
		2044	no further callbacks will be invoked and as many resources as possible
		2045	will be freed. Any method you will call on the handle object after
		2046	destroying it in this way will be silently ignored (and it will return the
		2047	empty list).
		2048
		2049	Normally, you can just "forget" any references to an AnyEvent::Handle
		2050	object and it will simply shut down. This works in fatal error and EOF
		2051	callbacks, as well as code outside. It does I<NOT> work in a read or write
		2052	callback, so when you want to destroy the AnyEvent::Handle object from
		2053	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		2054	that case.
		2055
		2056	Destroying the handle object in this way has the advantage that callbacks
		2057	will be removed as well, so if those are the only reference holders (as
		2058	is common), then one doesn't need to do anything special to break any
		2059	reference cycles.
		2060
		2061	The handle might still linger in the background and write out remaining
		2062	data, as specified by the C<linger> option, however.
		2063
		2064	=cut
		2065
		2066	sub destroy {
		2067	my ($self) = @_;
		2068
		2069	$self->DESTROY;
		2070	%$self = ();
		2071	bless $self, "AnyEvent::Handle::destroyed";
		2072	}
		2073
		2074	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2075	#nop
		2076	}
		2077
		2078	=item $handle->destroyed
		2079
		2080	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2081	->destroy >>, true otherwise.
		2082
		2083	Can be useful to decide whether the handle is still valid after some
		2084	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2085	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2086	can destroy the handle, so work can be avoided by checking sometimes:
		2087
		2088	$hdl->starttls ("accept");
		2089	return if $hdl->destroyed;
		2090	$hdl->push_write (...
		2091
		2092	Note that the call to C<push_write> will silently be ignored if the handle
		2093	has been destroyed, so often you can just ignore the possibility of the
		2094	handle being destroyed.
		2095
		2096	=cut
		2097
		2098	sub destroyed { 0 }
		2099	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1341		2100
1342	=item AnyEvent::Handle::TLS_CTX	2101	=item AnyEvent::Handle::TLS_CTX
1343		2102
1344	This function creates and returns the Net::SSLeay::CTX object used by	2103	This function creates and returns the AnyEvent::TLS object used by default
1345	default for TLS mode.	2104	for TLS mode.
1346		2105
1347	The context is created like this:	2106	The context is created by calling L<AnyEvent::TLS> without any arguments.
1348
1349	Net::SSLeay::load_error_strings;
1350	Net::SSLeay::SSLeay_add_ssl_algorithms;
1351	Net::SSLeay::randomize;
1352
1353	my $CTX = Net::SSLeay::CTX_new;
1354
1355	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1356		2107
1357	=cut	2108	=cut
1358		2109
1359	our $TLS_CTX;	2110	our $TLS_CTX;
1360		2111
1361	sub TLS_CTX() {	2112	sub TLS_CTX() {
1362	$TLS_CTX || do {	2113	$TLS_CTX ||= do {
1363	require Net::SSLeay;	2114	require AnyEvent::TLS;
1364		2115
1365	Net::SSLeay::load_error_strings ();	2116	new AnyEvent::TLS
1366	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1367	Net::SSLeay::randomize ();
1368
1369	$TLS_CTX = Net::SSLeay::CTX_new ();
1370
1371	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1372
1373	$TLS_CTX
1374	}	2117	}
1375	}	2118	}
1376		2119
1377	=back	2120	=back
		2121
		2122
		2123	=head1 NONFREQUENTLY ASKED QUESTIONS
		2124
		2125	=over 4
		2126
		2127	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2128	still get further invocations!
		2129
		2130	That's because AnyEvent::Handle keeps a reference to itself when handling
		2131	read or write callbacks.
		2132
		2133	It is only safe to "forget" the reference inside EOF or error callbacks,
		2134	from within all other callbacks, you need to explicitly call the C<<
		2135	->destroy >> method.
		2136
		2137	=item I get different callback invocations in TLS mode/Why can't I pause
		2138	reading?
		2139
		2140	Unlike, say, TCP, TLS connections do not consist of two independent
		2141	communication channels, one for each direction. Or put differently, the
		2142	read and write directions are not independent of each other: you cannot
		2143	write data unless you are also prepared to read, and vice versa.
		2144
		2145	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
		2146	callback invocations when you are not expecting any read data - the reason
		2147	is that AnyEvent::Handle always reads in TLS mode.
		2148
		2149	During the connection, you have to make sure that you always have a
		2150	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2151	connection (or when you no longer want to use it) you can call the
		2152	C<destroy> method.
		2153
		2154	=item How do I read data until the other side closes the connection?
		2155
		2156	If you just want to read your data into a perl scalar, the easiest way
		2157	to achieve this is by setting an C<on_read> callback that does nothing,
		2158	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2159	will be in C<$_[0]{rbuf}>:
		2160
		2161	$handle->on_read (sub { });
		2162	$handle->on_eof (undef);
		2163	$handle->on_error (sub {
		2164	my $data = delete $_[0]{rbuf};
		2165	});
		2166
		2167	The reason to use C<on_error> is that TCP connections, due to latencies
		2168	and packets loss, might get closed quite violently with an error, when in
		2169	fact all data has been received.
		2170
		2171	It is usually better to use acknowledgements when transferring data,
		2172	to make sure the other side hasn't just died and you got the data
		2173	intact. This is also one reason why so many internet protocols have an
		2174	explicit QUIT command.
		2175
		2176	=item I don't want to destroy the handle too early - how do I wait until
		2177	all data has been written?
		2178
		2179	After writing your last bits of data, set the C<on_drain> callback
		2180	and destroy the handle in there - with the default setting of
		2181	C<low_water_mark> this will be called precisely when all data has been
		2182	written to the socket:
		2183
		2184	$handle->push_write (...);
		2185	$handle->on_drain (sub {
		2186	warn "all data submitted to the kernel\n";
		2187	undef $handle;
		2188	});
		2189
		2190	If you just want to queue some data and then signal EOF to the other side,
		2191	consider using C<< ->push_shutdown >> instead.
		2192
		2193	=item I want to contact a TLS/SSL server, I don't care about security.
		2194
		2195	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2196	connect to it and then create the AnyEvent::Handle with the C<tls>
		2197	parameter:
		2198
		2199	tcp_connect $host, $port, sub {
		2200	my ($fh) = @_;
		2201
		2202	my $handle = new AnyEvent::Handle
		2203	fh => $fh,
		2204	tls => "connect",
		2205	on_error => sub { ... };
		2206
		2207	$handle->push_write (...);
		2208	};
		2209
		2210	=item I want to contact a TLS/SSL server, I do care about security.
		2211
		2212	Then you should additionally enable certificate verification, including
		2213	peername verification, if the protocol you use supports it (see
		2214	L<AnyEvent::TLS>, C<verify_peername>).
		2215
		2216	E.g. for HTTPS:
		2217
		2218	tcp_connect $host, $port, sub {
		2219	my ($fh) = @_;
		2220
		2221	my $handle = new AnyEvent::Handle
		2222	fh => $fh,
		2223	peername => $host,
		2224	tls => "connect",
		2225	tls_ctx => { verify => 1, verify_peername => "https" },
		2226	...
		2227
		2228	Note that you must specify the hostname you connected to (or whatever
		2229	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2230	peername verification will be done.
		2231
		2232	The above will use the system-dependent default set of trusted CA
		2233	certificates. If you want to check against a specific CA, add the
		2234	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2235
		2236	tls_ctx => {
		2237	verify => 1,
		2238	verify_peername => "https",
		2239	ca_file => "my-ca-cert.pem",
		2240	},
		2241
		2242	=item I want to create a TLS/SSL server, how do I do that?
		2243
		2244	Well, you first need to get a server certificate and key. You have
		2245	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2246	self-signed certificate (cheap. check the search engine of your choice,
		2247	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2248	nice program for that purpose).
		2249
		2250	Then create a file with your private key (in PEM format, see
		2251	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2252	file should then look like this:
		2253
		2254	-----BEGIN RSA PRIVATE KEY-----
		2255	...header data
		2256	... lots of base64'y-stuff
		2257	-----END RSA PRIVATE KEY-----
		2258
		2259	-----BEGIN CERTIFICATE-----
		2260	... lots of base64'y-stuff
		2261	-----END CERTIFICATE-----
		2262
		2263	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2264	specify this file as C<cert_file>:
		2265
		2266	tcp_server undef, $port, sub {
		2267	my ($fh) = @_;
		2268
		2269	my $handle = new AnyEvent::Handle
		2270	fh => $fh,
		2271	tls => "accept",
		2272	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2273	...
		2274
		2275	When you have intermediate CA certificates that your clients might not
		2276	know about, just append them to the C<cert_file>.
		2277
		2278	=back
		2279
1378		2280
1379	=head1 SUBCLASSING AnyEvent::Handle	2281	=head1 SUBCLASSING AnyEvent::Handle
1380		2282
1381	In many cases, you might want to subclass AnyEvent::Handle.	2283	In many cases, you might want to subclass AnyEvent::Handle.
1382		2284
…		…
1386	=over 4	2288	=over 4
1387		2289
1388	=item * all constructor arguments become object members.	2290	=item * all constructor arguments become object members.
1389		2291
1390	At least initially, when you pass a C<tls>-argument to the constructor it	2292	At least initially, when you pass a C<tls>-argument to the constructor it
1391	will end up in C<< $handle->{tls} >>. Those members might be changes or	2293	will end up in C<< $handle->{tls} >>. Those members might be changed or
1392	mutated later on (for example C<tls> will hold the TLS connection object).	2294	mutated later on (for example C<tls> will hold the TLS connection object).
1393		2295
1394	=item * other object member names are prefixed with an C<_>.	2296	=item * other object member names are prefixed with an C<_>.
1395		2297
1396	All object members not explicitly documented (internal use) are prefixed	2298	All object members not explicitly documented (internal use) are prefixed
…		…
1399		2301
1400	=item * all members not documented here and not prefixed with an underscore	2302	=item * all members not documented here and not prefixed with an underscore
1401	are free to use in subclasses.	2303	are free to use in subclasses.
1402		2304
1403	Of course, new versions of AnyEvent::Handle may introduce more "public"	2305	Of course, new versions of AnyEvent::Handle may introduce more "public"
1404	member variables, but thats just life, at least it is documented.	2306	member variables, but that's just life. At least it is documented.
1405		2307
1406	=back	2308	=back
1407		2309
1408	=head1 AUTHOR	2310	=head1 AUTHOR
1409		2311

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines