ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.142 by root, Mon Jul 6 20:24:47 2009 UTC vs.
Revision 1.252 by root, Fri Oct 18 20:12:16 2019 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.452;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
		15	my ($hdl, $fatal, $msg) = @_;
		16	AE::log error => $msg;
		17	$hdl->destroy;
32	$cv->send;	18	$cv->send;
33	},
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	say "got line <$line>";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	on stream-based filehandles (sockets, pipes, and other stream
52	on sockets see L<AnyEvent::Util>.	37	things). Specifically, it doesn't work as expected on files, packet-based
		38	sockets or similar things.
53		39
54	The L<AnyEvent::Intro> tutorial contains some well-documented	40	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	41	AnyEvent::Handle examples.
56		42
57	In the following, when the documentation refers to of "bytes" then this	43	In the following, where the documentation refers to "bytes", it means
58	means characters. As sysread and syswrite are used for all I/O, their	44	characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	45	treatment of characters applies to this module as well.
		46
		47	At the very minimum, you should specify C<fh> or C<connect>, and the
		48	C<on_error> callback.
60		49
61	All callbacks will be invoked with the handle object as their first	50	All callbacks will be invoked with the handle object as their first
62	argument.	51	argument.
63		52
		53	=cut
		54
		55	package AnyEvent::Handle;
		56
		57	use Scalar::Util ();
		58	use List::Util ();
		59	use Carp ();
		60	use Errno qw(EAGAIN EWOULDBLOCK EINTR);
		61
		62	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		63	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		64
		65	our $VERSION = $AnyEvent::VERSION;
		66
		67	sub _load_func($) {
		68	my $func = $_[0];
		69
		70	unless (defined &$func) {
		71	my $pkg = $func;
		72	do {
		73	$pkg =~ s/::[^:]+$//
		74	or return;
		75	eval "require $pkg";
		76	} until defined &$func;
		77	}
		78
		79	\&$func
		80	}
		81
		82	sub MAX_READ_SIZE() { 131072 }
		83
64	=head1 METHODS	84	=head1 METHODS
65		85
66	=over 4	86	=over 4
67		87
68	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...	88	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
69		89
70	The constructor supports these arguments (all as C<< key => value >> pairs).	90	The constructor supports these arguments (all as C<< key => value >> pairs).
71		91
72	=over 4	92	=over 4
73		93
74	=item fh => $filehandle [MANDATORY]	94	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
75		95
76	The filehandle this L<AnyEvent::Handle> object will operate on.	96	The filehandle this L<AnyEvent::Handle> object will operate on.
77
78	NOTE: The filehandle will be set to non-blocking mode (using	97	NOTE: The filehandle will be set to non-blocking mode (using
79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	98	C<AnyEvent::fh_unblock>) by the constructor and needs to stay in
80	that mode.	99	that mode.
		100
		101	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		102
		103	Try to connect to the specified host and service (port), using
		104	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		105	default C<peername>.
		106
		107	You have to specify either this parameter, or C<fh>, above.
		108
		109	It is possible to push requests on the read and write queues, and modify
		110	properties of the stream, even while AnyEvent::Handle is connecting.
		111
		112	When this parameter is specified, then the C<on_prepare>,
		113	C<on_connect_error> and C<on_connect> callbacks will be called under the
		114	appropriate circumstances:
		115
		116	=over 4
		117
		118	=item on_prepare => $cb->($handle)
		119
		120	This (rarely used) callback is called before a new connection is
		121	attempted, but after the file handle has been created (you can access that
		122	file handle via C<< $handle->{fh} >>). It could be used to prepare the
		123	file handle with parameters required for the actual connect (as opposed to
		124	settings that can be changed when the connection is already established).
		125
		126	The return value of this callback should be the connect timeout value in
		127	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
		128	default timeout is to be used).
		129
		130	=item on_connect => $cb->($handle, $host, $port, $retry->())
		131
		132	This callback is called when a connection has been successfully established.
		133
		134	The peer's numeric host and port (the socket peername) are passed as
		135	parameters, together with a retry callback. At the time it is called the
		136	read and write queues, EOF status, TLS status and similar properties of
		137	the handle will have been reset.
		138
		139	If, for some reason, the handle is not acceptable, calling C<$retry> will
		140	continue with the next connection target (in case of multi-homed hosts or
		141	SRV records there can be multiple connection endpoints). The C<$retry>
		142	callback can be invoked after the connect callback returns, i.e. one can
		143	start a handshake and then decide to retry with the next host if the
		144	handshake fails.
		145
		146	In most cases, you should ignore the C<$retry> parameter.
		147
		148	=item on_connect_error => $cb->($handle, $message)
		149
		150	This callback is called when the connection could not be
		151	established. C<$!> will contain the relevant error code, and C<$message> a
		152	message describing it (usually the same as C<"$!">).
		153
		154	If this callback isn't specified, then C<on_error> will be called with a
		155	fatal error instead.
		156
		157	=back
		158
		159	=item on_error => $cb->($handle, $fatal, $message)
		160
		161	This is the error callback, which is called when, well, some error
		162	occured, such as not being able to resolve the hostname, failure to
		163	connect, or a read error.
		164
		165	Some errors are fatal (which is indicated by C<$fatal> being true). On
		166	fatal errors the handle object will be destroyed (by a call to C<< ->
		167	destroy >>) after invoking the error callback (which means you are free to
		168	examine the handle object). Examples of fatal errors are an EOF condition
		169	with active (but unsatisfiable) read watchers (C<EPIPE>) or I/O errors. In
		170	cases where the other side can close the connection at will, it is
		171	often easiest to not report C<EPIPE> errors in this callback.
		172
		173	AnyEvent::Handle tries to find an appropriate error code for you to check
		174	against, but in some cases (TLS errors), this does not work well.
		175
		176	If you report the error to the user, it is recommended to always output
		177	the C<$message> argument in human-readable error messages (you don't need
		178	to report C<"$!"> if you report C<$message>).
		179
		180	If you want to react programmatically to the error, then looking at C<$!>
		181	and comparing it against some of the documented C<Errno> values is usually
		182	better than looking at the C<$message>.
		183
		184	Non-fatal errors can be retried by returning, but it is recommended
		185	to simply ignore this parameter and instead abondon the handle object
		186	when this callback is invoked. Examples of non-fatal errors are timeouts
		187	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
		188
		189	On entry to the callback, the value of C<$!> contains the operating
		190	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		191	C<EPROTO>).
		192
		193	While not mandatory, it is I<highly> recommended to set this callback, as
		194	you will not be notified of errors otherwise. The default just calls
		195	C<croak>.
		196
		197	=item on_read => $cb->($handle)
		198
		199	This sets the default read callback, which is called when data arrives
		200	and no read request is in the queue (unlike read queue callbacks, this
		201	callback will only be called when at least one octet of data is in the
		202	read buffer).
		203
		204	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
		205	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		206	must not enlarge or modify the read buffer, you can only remove data at
		207	the beginning from it.
		208
		209	You can also call C<< ->push_read (...) >> or any other function that
		210	modifies the read queue. Or do both. Or ...
		211
		212	When an EOF condition is detected, AnyEvent::Handle will first try to
		213	feed all the remaining data to the queued callbacks and C<on_read> before
		214	calling the C<on_eof> callback. If no progress can be made, then a fatal
		215	error will be raised (with C<$!> set to C<EPIPE>).
		216
		217	Note that, unlike requests in the read queue, an C<on_read> callback
		218	doesn't mean you I<require> some data: if there is an EOF and there
		219	are outstanding read requests then an error will be flagged. With an
		220	C<on_read> callback, the C<on_eof> callback will be invoked.
81		221
82	=item on_eof => $cb->($handle)	222	=item on_eof => $cb->($handle)
83		223
84	Set the callback to be called when an end-of-file condition is detected,	224	Set the callback to be called when an end-of-file condition is detected,
85	i.e. in the case of a socket, when the other side has closed the	225	i.e. in the case of a socket, when the other side has closed the
86	connection cleanly.	226	connection cleanly, and there are no outstanding read requests in the
		227	queue (if there are read requests, then an EOF counts as an unexpected
		228	connection close and will be flagged as an error).
87		229
88	For sockets, this just means that the other side has stopped sending data,	230	For sockets, this just means that the other side has stopped sending data,
89	you can still try to write data, and, in fact, one can return from the EOF	231	you can still try to write data, and, in fact, one can return from the EOF
90	callback and continue writing data, as only the read part has been shut	232	callback and continue writing data, as only the read part has been shut
91	down.	233	down.
92		234
93	While not mandatory, it is I<highly> recommended to set an EOF callback,
94	otherwise you might end up with a closed socket while you are still
95	waiting for data.
96
97	If an EOF condition has been detected but no C<on_eof> callback has been	235	If an EOF condition has been detected but no C<on_eof> callback has been
98	set, then a fatal error will be raised with C<$!> set to <0>.	236	set, then a fatal error will be raised with C<$!> set to <0>.
99		237
100	=item on_error => $cb->($handle, $fatal, $message)
101
102	This is the error callback, which is called when, well, some error
103	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.
105
106	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable
108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
109	errors are an EOF condition with active (but unsatisifable) read watchers
110	(C<EPIPE>) or I/O errors.
111
112	AnyEvent::Handle tries to find an appropriate error code for you to check
113	against, but in some cases (TLS errors), this does not work well. It is
114	recommended to always output the C<$message> argument in human-readable
115	error messages (it's usually the same as C<"$!">).
116
117	Non-fatal errors can be retried by simply returning, but it is recommended
118	to simply ignore this parameter and instead abondon the handle object
119	when this callback is invoked. Examples of non-fatal errors are timeouts
120	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
121
122	On callback entrance, the value of C<$!> contains the operating system
123	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
124	C<EPROTO>).
125
126	While not mandatory, it is I<highly> recommended to set this callback, as
127	you will not be notified of errors otherwise. The default simply calls
128	C<croak>.
129
130	=item on_read => $cb->($handle)
131
132	This sets the default read callback, which is called when data arrives
133	and no read request is in the queue (unlike read queue callbacks, this
134	callback will only be called when at least one octet of data is in the
135	read buffer).
136
137	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
138	method or access the C<< $handle->{rbuf} >> member directly. Note that you
139	must not enlarge or modify the read buffer, you can only remove data at
140	the beginning from it.
141
142	When an EOF condition is detected then AnyEvent::Handle will first try to
143	feed all the remaining data to the queued callbacks and C<on_read> before
144	calling the C<on_eof> callback. If no progress can be made, then a fatal
145	error will be raised (with C<$!> set to C<EPIPE>).
146
147	=item on_drain => $cb->($handle)	238	=item on_drain => $cb->($handle)
148		239
149	This sets the callback that is called when the write buffer becomes empty	240	This sets the callback that is called once when the write buffer becomes
150	(or when the callback is set and the buffer is empty already).	241	empty (and immediately when the handle object is created).
151		242
152	To append to the write buffer, use the C<< ->push_write >> method.	243	To append to the write buffer, use the C<< ->push_write >> method.
153		244
154	This callback is useful when you don't want to put all of your write data	245	This callback is useful when you don't want to put all of your write data
155	into the queue at once, for example, when you want to write the contents	246	into the queue at once, for example, when you want to write the contents
…		…
157	memory and push it into the queue, but instead only read more data from	248	memory and push it into the queue, but instead only read more data from
158	the file when the write queue becomes empty.	249	the file when the write queue becomes empty.
159		250
160	=item timeout => $fractional_seconds	251	=item timeout => $fractional_seconds
161		252
		253	=item rtimeout => $fractional_seconds
		254
		255	=item wtimeout => $fractional_seconds
		256
162	If non-zero, then this enables an "inactivity" timeout: whenever this many	257	If non-zero, then these enables an "inactivity" timeout: whenever this
163	seconds pass without a successful read or write on the underlying file	258	many seconds pass without a successful read or write on the underlying
164	handle, the C<on_timeout> callback will be invoked (and if that one is	259	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
165	missing, a non-fatal C<ETIMEDOUT> error will be raised).	260	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		261	error will be raised).
166		262
		263	There are three variants of the timeouts that work independently of each
		264	other, for both read and write (triggered when nothing was read I<OR>
		265	written), just read (triggered when nothing was read), and just write:
		266	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		267	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		268	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		269
167	Note that timeout processing is also active when you currently do not have	270	Note that timeout processing is active even when you do not have any
168	any outstanding read or write requests: If you plan to keep the connection	271	outstanding read or write requests: If you plan to keep the connection
169	idle then you should disable the timout temporarily or ignore the timeout	272	idle then you should disable the timeout temporarily or ignore the
170	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	273	timeout in the corresponding C<on_timeout> callback, in which case
171	restart the timeout.	274	AnyEvent::Handle will simply restart the timeout.
172		275
173	Zero (the default) disables this timeout.	276	Zero (the default) disables the corresponding timeout.
174		277
175	=item on_timeout => $cb->($handle)	278	=item on_timeout => $cb->($handle)
		279
		280	=item on_rtimeout => $cb->($handle)
		281
		282	=item on_wtimeout => $cb->($handle)
176		283
177	Called whenever the inactivity timeout passes. If you return from this	284	Called whenever the inactivity timeout passes. If you return from this
178	callback, then the timeout will be reset as if some activity had happened,	285	callback, then the timeout will be reset as if some activity had happened,
179	so this condition is not fatal in any way.	286	so this condition is not fatal in any way.
180		287
…		…
188	be configured to accept only so-and-so much data that it cannot act on	295	be configured to accept only so-and-so much data that it cannot act on
189	(for example, when expecting a line, an attacker could send an unlimited	296	(for example, when expecting a line, an attacker could send an unlimited
190	amount of data without a callback ever being called as long as the line	297	amount of data without a callback ever being called as long as the line
191	isn't finished).	298	isn't finished).
192		299
		300	=item wbuf_max => <bytes>
		301
		302	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
		303	when the write buffer ever (strictly) exceeds this size. This is useful to
		304	avoid some forms of denial-of-service attacks.
		305
		306	Although the units of this parameter is bytes, this is the I<raw> number
		307	of bytes not yet accepted by the kernel. This can make a difference when
		308	you e.g. use TLS, as TLS typically makes your write data larger (but it
		309	can also make it smaller due to compression).
		310
		311	As an example of when this limit is useful, take a chat server that sends
		312	chat messages to a client. If the client does not read those in a timely
		313	manner then the send buffer in the server would grow unbounded.
		314
193	=item autocork => <boolean>	315	=item autocork => <boolean>
194		316
195	When disabled (the default), then C<push_write> will try to immediately	317	When disabled (the default), C<push_write> will try to immediately
196	write the data to the handle, if possible. This avoids having to register	318	write the data to the handle if possible. This avoids having to register
197	a write watcher and wait for the next event loop iteration, but can	319	a write watcher and wait for the next event loop iteration, but can
198	be inefficient if you write multiple small chunks (on the wire, this	320	be inefficient if you write multiple small chunks (on the wire, this
199	disadvantage is usually avoided by your kernel's nagle algorithm, see	321	disadvantage is usually avoided by your kernel's nagle algorithm, see
200	C<no_delay>, but this option can save costly syscalls).	322	C<no_delay>, but this option can save costly syscalls).
201		323
202	When enabled, then writes will always be queued till the next event loop	324	When enabled, writes will always be queued till the next event loop
203	iteration. This is efficient when you do many small writes per iteration,	325	iteration. This is efficient when you do many small writes per iteration,
204	but less efficient when you do a single write only per iteration (or when	326	but less efficient when you do a single write only per iteration (or when
205	the write buffer often is full). It also increases write latency.	327	the write buffer often is full). It also increases write latency.
206		328
207	=item no_delay => <boolean>	329	=item no_delay => <boolean>
…		…
211	the Nagle algorithm, and usually it is beneficial.	333	the Nagle algorithm, and usually it is beneficial.
212		334
213	In some situations you want as low a delay as possible, which can be	335	In some situations you want as low a delay as possible, which can be
214	accomplishd by setting this option to a true value.	336	accomplishd by setting this option to a true value.
215		337
216	The default is your opertaing system's default behaviour (most likely	338	The default is your operating system's default behaviour (most likely
217	enabled), this option explicitly enables or disables it, if possible.	339	enabled). This option explicitly enables or disables it, if possible.
		340
		341	=item keepalive => <boolean>
		342
		343	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		344	normally, TCP connections have no time-out once established, so TCP
		345	connections, once established, can stay alive forever even when the other
		346	side has long gone. TCP keepalives are a cheap way to take down long-lived
		347	TCP connections when the other side becomes unreachable. While the default
		348	is OS-dependent, TCP keepalives usually kick in after around two hours,
		349	and, if the other side doesn't reply, take down the TCP connection some 10
		350	to 15 minutes later.
		351
		352	It is harmless to specify this option for file handles that do not support
		353	keepalives, and enabling it on connections that are potentially long-lived
		354	is usually a good idea.
		355
		356	=item oobinline => <boolean>
		357
		358	BSD majorly fucked up the implementation of TCP urgent data. The result
		359	is that almost no OS implements TCP according to the specs, and every OS
		360	implements it slightly differently.
		361
		362	If you want to handle TCP urgent data, then setting this flag (the default
		363	is enabled) gives you the most portable way of getting urgent data, by
		364	putting it into the stream.
		365
		366	Since BSD emulation of OOB data on top of TCP's urgent data can have
		367	security implications, AnyEvent::Handle sets this flag automatically
		368	unless explicitly specified. Note that setting this flag after
		369	establishing a connection I<may> be a bit too late (data loss could
		370	already have occured on BSD systems), but at least it will protect you
		371	from most attacks.
218		372
219	=item read_size => <bytes>	373	=item read_size => <bytes>
220		374
221	The default read block size (the amount of bytes this module will	375	The initial read block size, the number of bytes this module will try
222	try to read during each loop iteration, which affects memory	376	to read during each loop iteration. Each handle object will consume
223	requirements). Default: C<8192>.	377	at least this amount of memory for the read buffer as well, so when
		378	handling many connections watch out for memory requirements). See also
		379	C<max_read_size>. Default: C<2048>.
		380
		381	=item max_read_size => <bytes>
		382
		383	The maximum read buffer size used by the dynamic adjustment
		384	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		385	one go it will double C<read_size> up to the maximum given by this
		386	option. Default: C<131072> or C<read_size>, whichever is higher.
224		387
225	=item low_water_mark => <bytes>	388	=item low_water_mark => <bytes>
226		389
227	Sets the amount of bytes (default: C<0>) that make up an "empty" write	390	Sets the number of bytes (default: C<0>) that make up an "empty" write
228	buffer: If the write reaches this size or gets even samller it is	391	buffer: If the buffer reaches this size or gets even samller it is
229	considered empty.	392	considered empty.
230		393
231	Sometimes it can be beneficial (for performance reasons) to add data to	394	Sometimes it can be beneficial (for performance reasons) to add data to
232	the write buffer before it is fully drained, but this is a rare case, as	395	the write buffer before it is fully drained, but this is a rare case, as
233	the operating system kernel usually buffers data as well, so the default	396	the operating system kernel usually buffers data as well, so the default
234	is good in almost all cases.	397	is good in almost all cases.
235		398
236	=item linger => <seconds>	399	=item linger => <seconds>
237		400
238	If non-zero (default: C<3600>), then the destructor of the	401	If this is non-zero (default: C<3600>), the destructor of the
239	AnyEvent::Handle object will check whether there is still outstanding	402	AnyEvent::Handle object will check whether there is still outstanding
240	write data and will install a watcher that will write this data to the	403	write data and will install a watcher that will write this data to the
241	socket. No errors will be reported (this mostly matches how the operating	404	socket. No errors will be reported (this mostly matches how the operating
242	system treats outstanding data at socket close time).	405	system treats outstanding data at socket close time).
243		406
…		…
249		412
250	A string used to identify the remote site - usually the DNS hostname	413	A string used to identify the remote site - usually the DNS hostname
251	(I<not> IDN!) used to create the connection, rarely the IP address.	414	(I<not> IDN!) used to create the connection, rarely the IP address.
252		415
253	Apart from being useful in error messages, this string is also used in TLS	416	Apart from being useful in error messages, this string is also used in TLS
254	peername verification (see C<verify_peername> in L<AnyEvent::TLS>).	417	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		418	verification will be skipped when C<peername> is not specified or is
		419	C<undef>.
255		420
256	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	421	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
257		422
258	When this parameter is given, it enables TLS (SSL) mode, that means	423	When this parameter is given, it enables TLS (SSL) mode, that means
259	AnyEvent will start a TLS handshake as soon as the conenction has been	424	AnyEvent will start a TLS handshake as soon as the connection has been
260	established and will transparently encrypt/decrypt data afterwards.	425	established and will transparently encrypt/decrypt data afterwards.
261		426
262	All TLS protocol errors will be signalled as C<EPROTO>, with an	427	All TLS protocol errors will be signalled as C<EPROTO>, with an
263	appropriate error message.	428	appropriate error message.
264		429
265	TLS mode requires Net::SSLeay to be installed (it will be loaded	430	TLS mode requires Net::SSLeay to be installed (it will be loaded
266	automatically when you try to create a TLS handle): this module doesn't	431	automatically when you try to create a TLS handle): this module doesn't
267	have a dependency on that module, so if your module requires it, you have	432	have a dependency on that module, so if your module requires it, you have
268	to add the dependency yourself.	433	to add the dependency yourself. If Net::SSLeay cannot be loaded or is too
		434	old, you get an C<EPROTO> error.
269		435
270	Unlike TCP, TLS has a server and client side: for the TLS server side, use	436	Unlike TCP, TLS has a server and client side: for the TLS server side, use
271	C<accept>, and for the TLS client side of a connection, use C<connect>	437	C<accept>, and for the TLS client side of a connection, use C<connect>
272	mode.	438	mode.
273		439
…		…
284	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,	450	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
285	passing in the wrong integer will lead to certain crash. This most often	451	passing in the wrong integer will lead to certain crash. This most often
286	happens when one uses a stylish C<< tls => 1 >> and is surprised about the	452	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
287	segmentation fault.	453	segmentation fault.
288		454
289	See the C<< ->starttls >> method for when need to start TLS negotiation later.	455	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
290		456
291	=item tls_ctx => $anyevent_tls	457	=item tls_ctx => $anyevent_tls
292		458
293	Use the given C<AnyEvent::TLS> object to create the new TLS connection	459	Use the given C<AnyEvent::TLS> object to create the new TLS connection
294	(unless a connection object was specified directly). If this parameter is	460	(unless a connection object was specified directly). If this
295	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	461	parameter is missing (or C<undef>), then AnyEvent::Handle will use
		462	C<AnyEvent::Handle::TLS_CTX>.
296		463
297	Instead of an object, you can also specify a hash reference with C<< key	464	Instead of an object, you can also specify a hash reference with C<< key
298	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a	465	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
299	new TLS context object.	466	new TLS context object.
300		467
301	=item on_starttls => $cb->($handle, $success)	468	=item on_starttls => $cb->($handle, $success[, $error_message])
302		469
303	This callback will be invoked when the TLS/SSL handshake has finished. If	470	This callback will be invoked when the TLS/SSL handshake has finished. If
304	C<$success> is true, then the TLS handshake succeeded, otherwise it failed	471	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
305	(C<on_stoptls> will not be called in this case).	472	(C<on_stoptls> will not be called in this case).
306		473
307	The session in C<< $handle->{tls} >> can still be examined in this	474	The session in C<< $handle->{tls} >> can still be examined in this
308	callback, even when the handshake was not successful.	475	callback, even when the handshake was not successful.
		476
		477	TLS handshake failures will not cause C<on_error> to be invoked when this
		478	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		479
		480	Without this callback, handshake failures lead to C<on_error> being
		481	called as usual.
		482
		483	Note that you cannot just call C<starttls> again in this callback. If you
		484	need to do that, start an zero-second timer instead whose callback can
		485	then call C<< ->starttls >> again.
309		486
310	=item on_stoptls => $cb->($handle)	487	=item on_stoptls => $cb->($handle)
311		488
312	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is	489	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
313	set, then it will be invoked after freeing the TLS session. If it is not,	490	set, then it will be invoked after freeing the TLS session. If it is not,
…		…
318	callback.	495	callback.
319		496
320	This callback will only be called on TLS shutdowns, not when the	497	This callback will only be called on TLS shutdowns, not when the
321	underlying handle signals EOF.	498	underlying handle signals EOF.
322		499
323	=item json => JSON or JSON::XS object	500	=item json => L<JSON>, L<JSON::PP> or L<JSON::XS> object
324		501
325	This is the json coder object used by the C<json> read and write types.	502	This is the json coder object used by the C<json> read and write types.
326		503
327	If you don't supply it, then AnyEvent::Handle will create and use a	504	If you don't supply it, then AnyEvent::Handle will create and use a
328	suitable one (on demand), which will write and expect UTF-8 encoded JSON	505	suitable one (on demand), which will write and expect UTF-8 encoded
		506	JSON texts (either using L<JSON::XS> or L<JSON>). The written texts are
		507	guaranteed not to contain any newline character.
		508
		509	For security reasons, this encoder will likely I<not> handle numbers and
		510	strings, only arrays and objects/hashes. The reason is that originally
		511	JSON was self-delimited, but Dougles Crockford thought it was a splendid
		512	idea to redefine JSON incompatibly, so this is no longer true.
		513
		514	For protocols that used back-to-back JSON texts, this might lead to
		515	run-ins, where two or more JSON texts will be interpreted as one JSON
329	texts.	516	text.
330		517
		518	For this reason, if the default encoder uses L<JSON::XS>, it will default
		519	to not allowing anything but arrays and objects/hashes, at least for the
		520	forseeable future (it will change at some point). This might or might not
		521	be true for the L<JSON> module, so this might cause a security issue.
		522
		523	If you depend on either behaviour, you should create your own json object
		524	and pass it in explicitly.
		525
		526	=item cbor => L<CBOR::XS> object
		527
		528	This is the cbor coder object used by the C<cbor> read and write types.
		529
		530	If you don't supply it, then AnyEvent::Handle will create and use a
		531	suitable one (on demand), which will write CBOR without using extensions,
		532	if possible.
		533
331	Note that you are responsible to depend on the JSON module if you want to	534	Note that you are responsible to depend on the L<CBOR::XS> module if you
332	use this functionality, as AnyEvent does not have a dependency itself.	535	want to use this functionality, as AnyEvent does not have a dependency on
		536	it itself.
333		537
334	=back	538	=back
335		539
336	=cut	540	=cut
337		541
338	sub new {	542	sub new {
339	my $class = shift;	543	my $class = shift;
340	my $self = bless { @_ }, $class;	544	my $self = bless { @_ }, $class;
341		545
342	$self->{fh} or Carp::croak "mandatory argument fh is missing";	546	if ($self->{fh}) {
		547	$self->_start;
		548	return unless $self->{fh}; # could be gone by now
343		549
		550	} elsif ($self->{connect}) {
		551	require AnyEvent::Socket;
		552
		553	$self->{peername} = $self->{connect}[0]
		554	unless exists $self->{peername};
		555
		556	$self->{_skip_drain_rbuf} = 1;
		557
		558	{
		559	Scalar::Util::weaken (my $self = $self);
		560
		561	$self->{_connect} =
		562	AnyEvent::Socket::tcp_connect (
		563	$self->{connect}[0],
		564	$self->{connect}[1],
		565	sub {
		566	my ($fh, $host, $port, $retry) = @_;
		567
		568	delete $self->{_connect}; # no longer needed
		569
		570	if ($fh) {
		571	$self->{fh} = $fh;
		572
		573	delete $self->{_skip_drain_rbuf};
		574	$self->_start;
		575
		576	$self->{on_connect}
		577	and $self->{on_connect}($self, $host, $port, sub {
		578	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		579	$self->{_skip_drain_rbuf} = 1;
		580	&$retry;
		581	});
		582
		583	} else {
		584	if ($self->{on_connect_error}) {
		585	$self->{on_connect_error}($self, "$!");
		586	$self->destroy if $self;
		587	} else {
		588	$self->_error ($!, 1);
		589	}
		590	}
		591	},
		592	sub {
		593	local $self->{fh} = $_[0];
		594
		595	$self->{on_prepare}
		596	? $self->{on_prepare}->($self)
		597	: ()
		598	}
		599	);
		600	}
		601
		602	} else {
		603	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		604	}
		605
		606	$self
		607	}
		608
		609	sub _start {
		610	my ($self) = @_;
		611
		612	# too many clueless people try to use udp and similar sockets
		613	# with AnyEvent::Handle, do them a favour.
		614	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		615	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		616	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
		617
344	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	618	AnyEvent::fh_unblock $self->{fh};
345		619
		620	$self->{_activity} =
		621	$self->{_ractivity} =
346	$self->{_activity} = AnyEvent->now;	622	$self->{_wactivity} = AE::now;
347	$self->_timeout;
348		623
		624	$self->{read_size} ||= 2048;
		625	$self->{max_read_size} = $self->{read_size}
		626	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		627
		628	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		629	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		630	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		631
349	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};	632	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		633	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
350		634
		635	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		636
351	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})	637	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
352	if $self->{tls};	638	if $self->{tls};
353		639
354	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	640	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
355		641
356	$self->start_read	642	$self->start_read
357	if $self->{on_read};	643	if $self->{on_read} || @{ $self->{_queue} };
358		644
359	$self->{fh} && $self	645	$self->_drain_wbuf;
360	}
361
362	sub _shutdown {
363	my ($self) = @_;
364
365	delete @$self{qw(_tw _rw _ww fh wbuf on_read _queue)};
366	$self->{_eof} = 1; # tell starttls et. al to stop trying
367
368	&_freetls;
369	}	646	}
370		647
371	sub _error {	648	sub _error {
372	my ($self, $errno, $fatal, $message) = @_;	649	my ($self, $errno, $fatal, $message) = @_;
373		650
374	$self->_shutdown
375	if $fatal;
376
377	$! = $errno;	651	$! = $errno;
378	$message ||= "$!";	652	$message ||= "$!";
379		653
380	if ($self->{on_error}) {	654	if ($self->{on_error}) {
381	$self->{on_error}($self, $fatal, $message);	655	$self->{on_error}($self, $fatal, $message);
382	} elsif ($self->{fh}) {	656	$self->destroy if $fatal;
		657	} elsif ($self->{fh} || $self->{connect}) {
		658	$self->destroy;
383	Carp::croak "AnyEvent::Handle uncaught error: $message";	659	Carp::croak "AnyEvent::Handle uncaught error: $message";
384	}	660	}
385	}	661	}
386		662
387	=item $fh = $handle->fh	663	=item $fh = $handle->fh
…		…
412	$_[0]{on_eof} = $_[1];	688	$_[0]{on_eof} = $_[1];
413	}	689	}
414		690
415	=item $handle->on_timeout ($cb)	691	=item $handle->on_timeout ($cb)
416		692
417	Replace the current C<on_timeout> callback, or disables the callback (but	693	=item $handle->on_rtimeout ($cb)
418	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
419	argument and method.
420		694
421	=cut	695	=item $handle->on_wtimeout ($cb)
422		696
423	sub on_timeout {	697	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
424	$_[0]{on_timeout} = $_[1];	698	callback, or disables the callback (but not the timeout) if C<$cb> =
425	}	699	C<undef>. See the C<timeout> constructor argument and method.
		700
		701	=cut
		702
		703	# see below
426		704
427	=item $handle->autocork ($boolean)	705	=item $handle->autocork ($boolean)
428		706
429	Enables or disables the current autocork behaviour (see C<autocork>	707	Enables or disables the current autocork behaviour (see C<autocork>
430	constructor argument). Changes will only take effect on the next write.	708	constructor argument). Changes will only take effect on the next write.
…		…
443	=cut	721	=cut
444		722
445	sub no_delay {	723	sub no_delay {
446	$_[0]{no_delay} = $_[1];	724	$_[0]{no_delay} = $_[1];
447		725
		726	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		727	if $_[0]{fh};
		728	}
		729
		730	=item $handle->keepalive ($boolean)
		731
		732	Enables or disables the C<keepalive> setting (see constructor argument of
		733	the same name for details).
		734
		735	=cut
		736
		737	sub keepalive {
		738	$_[0]{keepalive} = $_[1];
		739
448	eval {	740	eval {
449	local $SIG{__DIE__};	741	local $SIG{__DIE__};
450	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	742	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		743	if $_[0]{fh};
		744	};
		745	}
		746
		747	=item $handle->oobinline ($boolean)
		748
		749	Enables or disables the C<oobinline> setting (see constructor argument of
		750	the same name for details).
		751
		752	=cut
		753
		754	sub oobinline {
		755	$_[0]{oobinline} = $_[1];
		756
		757	eval {
		758	local $SIG{__DIE__};
		759	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		760	if $_[0]{fh};
451	};	761	};
452	}	762	}
453		763
454	=item $handle->on_starttls ($cb)	764	=item $handle->on_starttls ($cb)
455		765
…		…
465		775
466	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).	776	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
467		777
468	=cut	778	=cut
469		779
470	sub on_starttls {	780	sub on_stoptls {
471	$_[0]{on_stoptls} = $_[1];	781	$_[0]{on_stoptls} = $_[1];
472	}	782	}
473		783
		784	=item $handle->rbuf_max ($max_octets)
		785
		786	Configures the C<rbuf_max> setting (C<undef> disables it).
		787
		788	=item $handle->wbuf_max ($max_octets)
		789
		790	Configures the C<wbuf_max> setting (C<undef> disables it).
		791
		792	=cut
		793
		794	sub rbuf_max {
		795	$_[0]{rbuf_max} = $_[1];
		796	}
		797
		798	sub wbuf_max {
		799	$_[0]{wbuf_max} = $_[1];
		800	}
		801
474	#############################################################################	802	#############################################################################
475		803
476	=item $handle->timeout ($seconds)	804	=item $handle->timeout ($seconds)
477		805
		806	=item $handle->rtimeout ($seconds)
		807
		808	=item $handle->wtimeout ($seconds)
		809
478	Configures (or disables) the inactivity timeout.	810	Configures (or disables) the inactivity timeout.
479		811
480	=cut	812	The timeout will be checked instantly, so this method might destroy the
		813	handle before it returns.
481		814
482	sub timeout {	815	=item $handle->timeout_reset
		816
		817	=item $handle->rtimeout_reset
		818
		819	=item $handle->wtimeout_reset
		820
		821	Reset the activity timeout, as if data was received or sent.
		822
		823	These methods are cheap to call.
		824
		825	=cut
		826
		827	for my $dir ("", "r", "w") {
		828	my $timeout = "${dir}timeout";
		829	my $tw = "_${dir}tw";
		830	my $on_timeout = "on_${dir}timeout";
		831	my $activity = "_${dir}activity";
		832	my $cb;
		833
		834	*$on_timeout = sub {
		835	$_[0]{$on_timeout} = $_[1];
		836	};
		837
		838	*$timeout = sub {
483	my ($self, $timeout) = @_;	839	my ($self, $new_value) = @_;
484		840
		841	$new_value >= 0
		842	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		843
485	$self->{timeout} = $timeout;	844	$self->{$timeout} = $new_value;
486	$self->_timeout;	845	delete $self->{$tw}; &$cb;
487	}	846	};
488		847
		848	*{"${dir}timeout_reset"} = sub {
		849	$_[0]{$activity} = AE::now;
		850	};
		851
		852	# main workhorse:
489	# reset the timeout watcher, as neccessary	853	# reset the timeout watcher, as neccessary
490	# also check for time-outs	854	# also check for time-outs
491	sub _timeout {	855	$cb = sub {
492	my ($self) = @_;	856	my ($self) = @_;
493		857
494	if ($self->{timeout}) {	858	if ($self->{$timeout} && $self->{fh}) {
495	my $NOW = AnyEvent->now;	859	my $NOW = AE::now;
496		860
497	# when would the timeout trigger?	861	# when would the timeout trigger?
498	my $after = $self->{_activity} + $self->{timeout} - $NOW;	862	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
499		863
500	# now or in the past already?	864	# now or in the past already?
501	if ($after <= 0) {	865	if ($after <= 0) {
502	$self->{_activity} = $NOW;	866	$self->{$activity} = $NOW;
503		867
504	if ($self->{on_timeout}) {	868	if ($self->{$on_timeout}) {
505	$self->{on_timeout}($self);	869	$self->{$on_timeout}($self);
506	} else {	870	} else {
507	$self->_error (&Errno::ETIMEDOUT);	871	$self->_error (Errno::ETIMEDOUT);
		872	}
		873
		874	# callback could have changed timeout value, optimise
		875	return unless $self->{$timeout};
		876
		877	# calculate new after
		878	$after = $self->{$timeout};
508	}	879	}
509		880
510	# callback could have changed timeout value, optimise	881	Scalar::Util::weaken $self;
511	return unless $self->{timeout};	882	return unless $self; # ->error could have destroyed $self
512		883
513	# calculate new after	884	$self->{$tw} ||= AE::timer $after, 0, sub {
514	$after = $self->{timeout};	885	delete $self->{$tw};
		886	$cb->($self);
		887	};
		888	} else {
		889	delete $self->{$tw};
515	}	890	}
516
517	Scalar::Util::weaken $self;
518	return unless $self; # ->error could have destroyed $self
519
520	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
521	delete $self->{_tw};
522	$self->_timeout;
523	});
524	} else {
525	delete $self->{_tw};
526	}	891	}
527	}	892	}
528		893
529	#############################################################################	894	#############################################################################
530		895
…		…
537		902
538	The write queue is very simple: you can add data to its end, and	903	The write queue is very simple: you can add data to its end, and
539	AnyEvent::Handle will automatically try to get rid of it for you.	904	AnyEvent::Handle will automatically try to get rid of it for you.
540		905
541	When data could be written and the write buffer is shorter then the low	906	When data could be written and the write buffer is shorter then the low
542	water mark, the C<on_drain> callback will be invoked.	907	water mark, the C<on_drain> callback will be invoked once.
543		908
544	=over 4	909	=over 4
545		910
546	=item $handle->on_drain ($cb)	911	=item $handle->on_drain ($cb)
547		912
548	Sets the C<on_drain> callback or clears it (see the description of	913	Sets the C<on_drain> callback or clears it (see the description of
549	C<on_drain> in the constructor).	914	C<on_drain> in the constructor).
550		915
		916	This method may invoke callbacks (and therefore the handle might be
		917	destroyed after it returns).
		918
551	=cut	919	=cut
552		920
553	sub on_drain {	921	sub on_drain {
554	my ($self, $cb) = @_;	922	my ($self, $cb) = @_;
555		923
…		…
559	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});	927	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
560	}	928	}
561		929
562	=item $handle->push_write ($data)	930	=item $handle->push_write ($data)
563		931
564	Queues the given scalar to be written. You can push as much data as you	932	Queues the given scalar to be written. You can push as much data as
565	want (only limited by the available memory), as C<AnyEvent::Handle>	933	you want (only limited by the available memory and C<wbuf_max>), as
566	buffers it independently of the kernel.	934	C<AnyEvent::Handle> buffers it independently of the kernel.
		935
		936	This method may invoke callbacks (and therefore the handle might be
		937	destroyed after it returns).
567		938
568	=cut	939	=cut
569		940
570	sub _drain_wbuf {	941	sub _drain_wbuf {
571	my ($self) = @_;	942	my ($self) = @_;
…		…
575	Scalar::Util::weaken $self;	946	Scalar::Util::weaken $self;
576		947
577	my $cb = sub {	948	my $cb = sub {
578	my $len = syswrite $self->{fh}, $self->{wbuf};	949	my $len = syswrite $self->{fh}, $self->{wbuf};
579		950
580	if ($len >= 0) {	951	if (defined $len) {
581	substr $self->{wbuf}, 0, $len, "";	952	substr $self->{wbuf}, 0, $len, "";
582		953
583	$self->{_activity} = AnyEvent->now;	954	$self->{_activity} = $self->{_wactivity} = AE::now;
584		955
585	$self->{on_drain}($self)	956	$self->{on_drain}($self)
586	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})	957	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
587	&& $self->{on_drain};	958	&& $self->{on_drain};
588		959
589	delete $self->{_ww} unless length $self->{wbuf};	960	delete $self->{_ww} unless length $self->{wbuf};
590	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	961	} elsif ($! != EAGAIN && $! != EINTR && $! != EWOULDBLOCK && $! != WSAEWOULDBLOCK) {
591	$self->_error ($!, 1);	962	$self->_error ($!, 1);
592	}	963	}
593	};	964	};
594		965
595	# try to write data immediately	966	# try to write data immediately
596	$cb->() unless $self->{autocork};	967	$cb->() unless $self->{autocork};
597		968
598	# if still data left in wbuf, we need to poll	969	# if still data left in wbuf, we need to poll
599	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	970	$self->{_ww} = AE::io $self->{fh}, 1, $cb
600	if length $self->{wbuf};	971	if length $self->{wbuf};
		972
		973	if (
		974	defined $self->{wbuf_max}
		975	&& $self->{wbuf_max} < length $self->{wbuf}
		976	) {
		977	$self->_error (Errno::ENOSPC, 1), return;
		978	}
601	};	979	};
602	}	980	}
603		981
604	our %WH;	982	our %WH;
605		983
		984	# deprecated
606	sub register_write_type($$) {	985	sub register_write_type($$) {
607	$WH{$_[0]} = $_[1];	986	$WH{$_[0]} = $_[1];
608	}	987	}
609		988
610	sub push_write {	989	sub push_write {
611	my $self = shift;	990	my $self = shift;
612		991
613	if (@_ > 1) {	992	if (@_ > 1) {
614	my $type = shift;	993	my $type = shift;
615		994
		995	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
616	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	996	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
617	->($self, @_);	997	->($self, @_);
618	}	998	}
619		999
		1000	# we downgrade here to avoid hard-to-track-down bugs,
		1001	# and diagnose the problem earlier and better.
		1002
620	if ($self->{tls}) {	1003	if ($self->{tls}) {
621	$self->{_tls_wbuf} .= $_[0];	1004	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
622		1005	&_dotls ($self) if $self->{fh};
623	&_dotls ($self);
624	} else {	1006	} else {
625	$self->{wbuf} .= $_[0];	1007	utf8::downgrade $self->{wbuf} .= $_[0];
626	$self->_drain_wbuf;	1008	$self->_drain_wbuf if $self->{fh};
627	}	1009	}
628	}	1010	}
629		1011
630	=item $handle->push_write (type => @args)	1012	=item $handle->push_write (type => @args)
631		1013
632	Instead of formatting your data yourself, you can also let this module do	1014	Instead of formatting your data yourself, you can also let this module
633	the job by specifying a type and type-specific arguments.	1015	do the job by specifying a type and type-specific arguments. You
		1016	can also specify the (fully qualified) name of a package, in which
		1017	case AnyEvent tries to load the package and then expects to find the
		1018	C<anyevent_write_type> function inside (see "custom write types", below).
634		1019
635	Predefined types are (if you have ideas for additional types, feel free to	1020	Predefined types are (if you have ideas for additional types, feel free to
636	drop by and tell us):	1021	drop by and tell us):
637		1022
638	=over 4	1023	=over 4
…		…
669		1054
670	Encodes the given hash or array reference into a JSON object. Unless you	1055	Encodes the given hash or array reference into a JSON object. Unless you
671	provide your own JSON object, this means it will be encoded to JSON text	1056	provide your own JSON object, this means it will be encoded to JSON text
672	in UTF-8.	1057	in UTF-8.
673		1058
		1059	The default encoder might or might not handle every type of JSON value -
		1060	it might be limited to arrays and objects for security reasons. See the
		1061	C<json> constructor attribute for more details.
		1062
674	JSON objects (and arrays) are self-delimiting, so you can write JSON at	1063	JSON objects (and arrays) are self-delimiting, so if you only use arrays
675	one end of a handle and read them at the other end without using any	1064	and hashes, you can write JSON at one end of a handle and read them at the
676	additional framing.	1065	other end without using any additional framing.
677		1066
678	The generated JSON text is guaranteed not to contain any newlines: While	1067	The JSON text generated by the default encoder is guaranteed not to
679	this module doesn't need delimiters after or between JSON texts to be	1068	contain any newlines: While this module doesn't need delimiters after or
680	able to read them, many other languages depend on that.	1069	between JSON texts to be able to read them, many other languages depend on
		1070	them.
681		1071
682	A simple RPC protocol that interoperates easily with others is to send	1072	A simple RPC protocol that interoperates easily with other languages is
683	JSON arrays (or objects, although arrays are usually the better choice as	1073	to send JSON arrays (or objects, although arrays are usually the better
684	they mimic how function argument passing works) and a newline after each	1074	choice as they mimic how function argument passing works) and a newline
685	JSON text:	1075	after each JSON text:
686		1076
687	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever	1077	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
688	$handle->push_write ("\012");	1078	$handle->push_write ("\012");
689		1079
690	An AnyEvent::Handle receiver would simply use the C<json> read type and	1080	An AnyEvent::Handle receiver would simply use the C<json> read type and
…		…
693	$handle->push_read (json => sub { my $array = $_[1]; ... });	1083	$handle->push_read (json => sub { my $array = $_[1]; ... });
694		1084
695	Other languages could read single lines terminated by a newline and pass	1085	Other languages could read single lines terminated by a newline and pass
696	this line into their JSON decoder of choice.	1086	this line into their JSON decoder of choice.
697		1087
		1088	=item cbor => $perl_scalar
		1089
		1090	Encodes the given scalar into a CBOR value. Unless you provide your own
		1091	L<CBOR::XS> object, this means it will be encoded to a CBOR string not
		1092	using any extensions, if possible.
		1093
		1094	CBOR values are self-delimiting, so you can write CBOR at one end of
		1095	a handle and read them at the other end without using any additional
		1096	framing.
		1097
		1098	A simple nd very very fast RPC protocol that interoperates with
		1099	other languages is to send CBOR and receive CBOR values (arrays are
		1100	recommended):
		1101
		1102	$handle->push_write (cbor => ["method", "arg1", "arg2"]); # whatever
		1103
		1104	An AnyEvent::Handle receiver would simply use the C<cbor> read type:
		1105
		1106	$handle->push_read (cbor => sub { my $array = $_[1]; ... });
		1107
698	=cut	1108	=cut
		1109
		1110	sub json_coder() {
		1111	eval { require JSON::XS; JSON::XS->new->utf8 }
		1112	|| do { require JSON::PP; JSON::PP->new->utf8 }
		1113	}
699		1114
700	register_write_type json => sub {	1115	register_write_type json => sub {
701	my ($self, $ref) = @_;	1116	my ($self, $ref) = @_;
702		1117
703	require JSON;	1118	($self->{json} ||= json_coder)
		1119	->encode ($ref)
		1120	};
704		1121
705	$self->{json} ? $self->{json}->encode ($ref)	1122	sub cbor_coder() {
706	: JSON::encode_json ($ref)	1123	require CBOR::XS;
		1124	CBOR::XS->new
		1125	}
		1126
		1127	register_write_type cbor => sub {
		1128	my ($self, $scalar) = @_;
		1129
		1130	($self->{cbor} ||= cbor_coder)
		1131	->encode ($scalar)
707	};	1132	};
708		1133
709	=item storable => $reference	1134	=item storable => $reference
710		1135
711	Freezes the given reference using L<Storable> and writes it to the	1136	Freezes the given reference using L<Storable> and writes it to the
…		…
714	=cut	1139	=cut
715		1140
716	register_write_type storable => sub {	1141	register_write_type storable => sub {
717	my ($self, $ref) = @_;	1142	my ($self, $ref) = @_;
718		1143
719	require Storable;	1144	require Storable unless $Storable::VERSION;
720		1145
721	pack "w/a*", Storable::nfreeze ($ref)	1146	pack "w/a*", Storable::nfreeze ($ref)
722	};	1147	};
723		1148
724	=back	1149	=back
…		…
729	before it was actually written. One way to do that is to replace your	1154	before it was actually written. One way to do that is to replace your
730	C<on_drain> handler by a callback that shuts down the socket (and set	1155	C<on_drain> handler by a callback that shuts down the socket (and set
731	C<low_water_mark> to C<0>). This method is a shorthand for just that, and	1156	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
732	replaces the C<on_drain> callback with:	1157	replaces the C<on_drain> callback with:
733		1158
734	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown	1159	sub { shutdown $_[0]{fh}, 1 }
735		1160
736	This simply shuts down the write side and signals an EOF condition to the	1161	This simply shuts down the write side and signals an EOF condition to the
737	the peer.	1162	the peer.
738		1163
739	You can rely on the normal read queue and C<on_eof> handling	1164	You can rely on the normal read queue and C<on_eof> handling
740	afterwards. This is the cleanest way to close a connection.	1165	afterwards. This is the cleanest way to close a connection.
741		1166
		1167	This method may invoke callbacks (and therefore the handle might be
		1168	destroyed after it returns).
		1169
742	=cut	1170	=cut
743		1171
744	sub push_shutdown {	1172	sub push_shutdown {
745	my ($self) = @_;	1173	my ($self) = @_;
746		1174
747	delete $self->{low_water_mark};	1175	delete $self->{low_water_mark};
748	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });	1176	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
749	}	1177	}
750		1178
751	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1179	=item custom write types - Package::anyevent_write_type $handle, @args
752		1180
753	This function (not method) lets you add your own types to C<push_write>.	1181	Instead of one of the predefined types, you can also specify the name of
		1182	a package. AnyEvent will try to load the package and then expects to find
		1183	a function named C<anyevent_write_type> inside. If it isn't found, it
		1184	progressively tries to load the parent package until it either finds the
		1185	function (good) or runs out of packages (bad).
		1186
754	Whenever the given C<type> is used, C<push_write> will invoke the code	1187	Whenever the given C<type> is used, C<push_write> will the function with
755	reference with the handle object and the remaining arguments.	1188	the handle object and the remaining arguments.
756		1189
757	The code reference is supposed to return a single octet string that will	1190	The function is supposed to return a single octet string that will be
758	be appended to the write buffer.	1191	appended to the write buffer, so you can mentally treat this function as a
		1192	"arguments to on-the-wire-format" converter.
759		1193
760	Note that this is a function, and all types registered this way will be	1194	Example: implement a custom write type C<join> that joins the remaining
761	global, so try to use unique names.	1195	arguments using the first one.
		1196
		1197	$handle->push_write (My::Type => " ", 1,2,3);
		1198
		1199	# uses the following package, which can be defined in the "My::Type" or in
		1200	# the "My" modules to be auto-loaded, or just about anywhere when the
		1201	# My::Type::anyevent_write_type is defined before invoking it.
		1202
		1203	package My::Type;
		1204
		1205	sub anyevent_write_type {
		1206	my ($handle, $delim, @args) = @_;
		1207
		1208	join $delim, @args
		1209	}
762		1210
763	=cut	1211	=cut
764		1212
765	#############################################################################	1213	#############################################################################
766		1214
…		…
775	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1223	ways, the "simple" way, using only C<on_read> and the "complex" way, using
776	a queue.	1224	a queue.
777		1225
778	In the simple case, you just install an C<on_read> callback and whenever	1226	In the simple case, you just install an C<on_read> callback and whenever
779	new data arrives, it will be called. You can then remove some data (if	1227	new data arrives, it will be called. You can then remove some data (if
780	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna	1228	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
781	leave the data there if you want to accumulate more (e.g. when only a	1229	leave the data there if you want to accumulate more (e.g. when only a
782	partial message has been received so far).	1230	partial message has been received so far), or change the read queue with
		1231	e.g. C<push_read>.
783		1232
784	In the more complex case, you want to queue multiple callbacks. In this	1233	In the more complex case, you want to queue multiple callbacks. In this
785	case, AnyEvent::Handle will call the first queued callback each time new	1234	case, AnyEvent::Handle will call the first queued callback each time new
786	data arrives (also the first time it is queued) and removes it when it has	1235	data arrives (also the first time it is queued) and remove it when it has
787	done its job (see C<push_read>, below).	1236	done its job (see C<push_read>, below).
788		1237
789	This way you can, for example, push three line-reads, followed by reading	1238	This way you can, for example, push three line-reads, followed by reading
790	a chunk of data, and AnyEvent::Handle will execute them in order.	1239	a chunk of data, and AnyEvent::Handle will execute them in order.
791		1240
…		…
848	=cut	1297	=cut
849		1298
850	sub _drain_rbuf {	1299	sub _drain_rbuf {
851	my ($self) = @_;	1300	my ($self) = @_;
852		1301
		1302	# avoid recursion
		1303	return if $self->{_skip_drain_rbuf};
853	local $self->{_in_drain} = 1;	1304	local $self->{_skip_drain_rbuf} = 1;
854
855	if (
856	defined $self->{rbuf_max}
857	&& $self->{rbuf_max} < length $self->{rbuf}
858	) {
859	$self->_error (&Errno::ENOSPC, 1), return;
860	}
861		1305
862	while () {	1306	while () {
863	# we need to use a separate tls read buffer, as we must not receive data while	1307	# we need to use a separate tls read buffer, as we must not receive data while
864	# we are draining the buffer, and this can only happen with TLS.	1308	# we are draining the buffer, and this can only happen with TLS.
865	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};	1309	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1310	if exists $self->{_tls_rbuf};
866		1311
867	my $len = length $self->{rbuf};	1312	my $len = length $self->{rbuf};
868		1313
869	if (my $cb = shift @{ $self->{_queue} }) {	1314	if (my $cb = shift @{ $self->{_queue} }) {
870	unless ($cb->($self)) {	1315	unless ($cb->($self)) {
871	if ($self->{_eof}) {	1316	# no progress can be made
872	# no progress can be made (not enough data and no data forthcoming)	1317	# (not enough data and no data forthcoming)
873	$self->_error (&Errno::EPIPE, 1), return;	1318	$self->_error (Errno::EPIPE, 1), return
874	}	1319	if $self->{_eof};
875		1320
876	unshift @{ $self->{_queue} }, $cb;	1321	unshift @{ $self->{_queue} }, $cb;
877	last;	1322	last;
878	}	1323	}
879	} elsif ($self->{on_read}) {	1324	} elsif ($self->{on_read}) {
…		…
886	&& !@{ $self->{_queue} } # and the queue is still empty	1331	&& !@{ $self->{_queue} } # and the queue is still empty
887	&& $self->{on_read} # but we still have on_read	1332	&& $self->{on_read} # but we still have on_read
888	) {	1333	) {
889	# no further data will arrive	1334	# no further data will arrive
890	# so no progress can be made	1335	# so no progress can be made
891	$self->_error (&Errno::EPIPE, 1), return	1336	$self->_error (Errno::EPIPE, 1), return
892	if $self->{_eof};	1337	if $self->{_eof};
893		1338
894	last; # more data might arrive	1339	last; # more data might arrive
895	}	1340	}
896	} else {	1341	} else {
…		…
899	last;	1344	last;
900	}	1345	}
901	}	1346	}
902		1347
903	if ($self->{_eof}) {	1348	if ($self->{_eof}) {
904	if ($self->{on_eof}) {	1349	$self->{on_eof}
905	$self->{on_eof}($self)	1350	? $self->{on_eof}($self)
906	} else {
907	$self->_error (0, 1, "Unexpected end-of-file");	1351	: $self->_error (0, 1, "Unexpected end-of-file");
908	}	1352
		1353	return;
		1354	}
		1355
		1356	if (
		1357	defined $self->{rbuf_max}
		1358	&& $self->{rbuf_max} < length $self->{rbuf}
		1359	) {
		1360	$self->_error (Errno::ENOSPC, 1), return;
909	}	1361	}
910		1362
911	# may need to restart read watcher	1363	# may need to restart read watcher
912	unless ($self->{_rw}) {	1364	unless ($self->{_rw}) {
913	$self->start_read	1365	$self->start_read
…		…
919		1371
920	This replaces the currently set C<on_read> callback, or clears it (when	1372	This replaces the currently set C<on_read> callback, or clears it (when
921	the new callback is C<undef>). See the description of C<on_read> in the	1373	the new callback is C<undef>). See the description of C<on_read> in the
922	constructor.	1374	constructor.
923		1375
		1376	This method may invoke callbacks (and therefore the handle might be
		1377	destroyed after it returns).
		1378
924	=cut	1379	=cut
925		1380
926	sub on_read {	1381	sub on_read {
927	my ($self, $cb) = @_;	1382	my ($self, $cb) = @_;
928		1383
929	$self->{on_read} = $cb;	1384	$self->{on_read} = $cb;
930	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1385	$self->_drain_rbuf if $cb;
931	}	1386	}
932		1387
933	=item $handle->rbuf	1388	=item $handle->rbuf
934		1389
935	Returns the read buffer (as a modifiable lvalue).	1390	Returns the read buffer (as a modifiable lvalue). You can also access the
		1391	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1392	much faster, and no less clean).
936		1393
937	You can access the read buffer directly as the C<< ->{rbuf} >>	1394	The only operation allowed on the read buffer (apart from looking at it)
938	member, if you want. However, the only operation allowed on the	1395	is removing data from its beginning. Otherwise modifying or appending to
939	read buffer (apart from looking at it) is removing data from its	1396	it is not allowed and will lead to hard-to-track-down bugs.
940	beginning. Otherwise modifying or appending to it is not allowed and will
941	lead to hard-to-track-down bugs.
942		1397
943	NOTE: The read buffer should only be used or modified if the C<on_read>,	1398	NOTE: The read buffer should only be used or modified in the C<on_read>
944	C<push_read> or C<unshift_read> methods are used. The other read methods	1399	callback or when C<push_read> or C<unshift_read> are used with a single
945	automatically manage the read buffer.	1400	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1401	will manage the read buffer on their own.
946		1402
947	=cut	1403	=cut
948		1404
949	sub rbuf : lvalue {	1405	sub rbuf : lvalue {
950	$_[0]{rbuf}	1406	$_[0]{rbuf}
…		…
967		1423
968	If enough data was available, then the callback must remove all data it is	1424	If enough data was available, then the callback must remove all data it is
969	interested in (which can be none at all) and return a true value. After returning	1425	interested in (which can be none at all) and return a true value. After returning
970	true, it will be removed from the queue.	1426	true, it will be removed from the queue.
971		1427
		1428	These methods may invoke callbacks (and therefore the handle might be
		1429	destroyed after it returns).
		1430
972	=cut	1431	=cut
973		1432
974	our %RH;	1433	our %RH;
975		1434
976	sub register_read_type($$) {	1435	sub register_read_type($$) {
…		…
982	my $cb = pop;	1441	my $cb = pop;
983		1442
984	if (@_) {	1443	if (@_) {
985	my $type = shift;	1444	my $type = shift;
986		1445
		1446	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
987	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1447	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
988	->($self, $cb, @_);	1448	->($self, $cb, @_);
989	}	1449	}
990		1450
991	push @{ $self->{_queue} }, $cb;	1451	push @{ $self->{_queue} }, $cb;
992	$self->_drain_rbuf unless $self->{_in_drain};	1452	$self->_drain_rbuf;
993	}	1453	}
994		1454
995	sub unshift_read {	1455	sub unshift_read {
996	my $self = shift;	1456	my $self = shift;
997	my $cb = pop;	1457	my $cb = pop;
998		1458
999	if (@_) {	1459	if (@_) {
1000	my $type = shift;	1460	my $type = shift;
1001		1461
		1462	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
1002	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1463	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
1003	->($self, $cb, @_);	1464	->($self, $cb, @_);
1004	}	1465	}
1005		1466
1006
1007	unshift @{ $self->{_queue} }, $cb;	1467	unshift @{ $self->{_queue} }, $cb;
1008	$self->_drain_rbuf unless $self->{_in_drain};	1468	$self->_drain_rbuf;
1009	}	1469	}
1010		1470
1011	=item $handle->push_read (type => @args, $cb)	1471	=item $handle->push_read (type => @args, $cb)
1012		1472
1013	=item $handle->unshift_read (type => @args, $cb)	1473	=item $handle->unshift_read (type => @args, $cb)
1014		1474
1015	Instead of providing a callback that parses the data itself you can chose	1475	Instead of providing a callback that parses the data itself you can chose
1016	between a number of predefined parsing formats, for chunks of data, lines	1476	between a number of predefined parsing formats, for chunks of data, lines
1017	etc.	1477	etc. You can also specify the (fully qualified) name of a package, in
		1478	which case AnyEvent tries to load the package and then expects to find the
		1479	C<anyevent_read_type> function inside (see "custom read types", below).
1018		1480
1019	Predefined types are (if you have ideas for additional types, feel free to	1481	Predefined types are (if you have ideas for additional types, feel free to
1020	drop by and tell us):	1482	drop by and tell us):
1021		1483
1022	=over 4	1484	=over 4
…		…
1028	data.	1490	data.
1029		1491
1030	Example: read 2 bytes.	1492	Example: read 2 bytes.
1031		1493
1032	$handle->push_read (chunk => 2, sub {	1494	$handle->push_read (chunk => 2, sub {
1033	warn "yay ", unpack "H*", $_[1];	1495	say "yay " . unpack "H*", $_[1];
1034	});	1496	});
1035		1497
1036	=cut	1498	=cut
1037		1499
1038	register_read_type chunk => sub {	1500	register_read_type chunk => sub {
…		…
1068		1530
1069	register_read_type line => sub {	1531	register_read_type line => sub {
1070	my ($self, $cb, $eol) = @_;	1532	my ($self, $cb, $eol) = @_;
1071		1533
1072	if (@_ < 3) {	1534	if (@_ < 3) {
1073	# this is more than twice as fast as the generic code below	1535	# this is faster then the generic code below
1074	sub {	1536	sub {
1075	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;	1537	(my $pos = index $_[0]{rbuf}, "\012") >= 0
		1538	or return;
1076		1539
		1540	(my $str = substr $_[0]{rbuf}, 0, $pos + 1, "") =~ s/(\015?\012)\Z// or die;
1077	$cb->($_[0], $1, $2);	1541	$cb->($_[0], $str, "$1");
1078	1	1542	1
1079	}	1543	}
1080	} else {	1544	} else {
1081	$eol = quotemeta $eol unless ref $eol;	1545	$eol = quotemeta $eol unless ref $eol;
1082	$eol = qr|^(.*?)($eol)|s;	1546	$eol = qr|^(.*?)($eol)|s;
1083		1547
1084	sub {	1548	sub {
1085	$_[0]{rbuf} =~ s/$eol// or return;	1549	$_[0]{rbuf} =~ s/$eol// or return;
1086		1550
1087	$cb->($_[0], $1, $2);	1551	$cb->($_[0], "$1", "$2");
1088	1	1552	1
1089	}	1553	}
1090	}	1554	}
1091	};	1555	};
1092		1556
1093	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1557	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
1094		1558
1095	Makes a regex match against the regex object C<$accept> and returns	1559	Makes a regex match against the regex object C<$accept> and returns
1096	everything up to and including the match.	1560	everything up to and including the match. All the usual regex variables
		1561	($1, %+ etc.) from the regex match are available in the callback.
1097		1562
1098	Example: read a single line terminated by '\n'.	1563	Example: read a single line terminated by '\n'.
1099		1564
1100	$handle->push_read (regex => qr<\n>, sub { ... });	1565	$handle->push_read (regex => qr<\n>, sub { ... });
1101		1566
…		…
1114	the receive buffer when neither C<$accept> nor C<$reject> match,	1579	the receive buffer when neither C<$accept> nor C<$reject> match,
1115	and everything preceding and including the match will be accepted	1580	and everything preceding and including the match will be accepted
1116	unconditionally. This is useful to skip large amounts of data that you	1581	unconditionally. This is useful to skip large amounts of data that you
1117	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1582	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
1118	have to start matching from the beginning. This is purely an optimisation	1583	have to start matching from the beginning. This is purely an optimisation
1119	and is usually worth only when you expect more than a few kilobytes.	1584	and is usually worth it only when you expect more than a few kilobytes.
1120		1585
1121	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1586	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
1122	expect the header to be very large (it isn't in practise, but...), we use	1587	expect the header to be very large (it isn't in practice, but...), we use
1123	a skip regex to skip initial portions. The skip regex is tricky in that	1588	a skip regex to skip initial portions. The skip regex is tricky in that
1124	it only accepts something not ending in either \015 or \012, as these are	1589	it only accepts something not ending in either \015 or \012, as these are
1125	required for the accept regex.	1590	required for the accept regex.
1126		1591
1127	$handle->push_read (regex =>	1592	$handle->push_read (regex =>
…		…
1140		1605
1141	sub {	1606	sub {
1142	# accept	1607	# accept
1143	if ($$rbuf =~ $accept) {	1608	if ($$rbuf =~ $accept) {
1144	$data .= substr $$rbuf, 0, $+[0], "";	1609	$data .= substr $$rbuf, 0, $+[0], "";
1145	$cb->($self, $data);	1610	$cb->($_[0], $data);
1146	return 1;	1611	return 1;
1147	}	1612	}
1148		1613
1149	# reject	1614	# reject
1150	if ($reject && $$rbuf =~ $reject) {	1615	if ($reject && $$rbuf =~ $reject) {
1151	$self->_error (&Errno::EBADMSG);	1616	$_[0]->_error (Errno::EBADMSG);
1152	}	1617	}
1153		1618
1154	# skip	1619	# skip
1155	if ($skip && $$rbuf =~ $skip) {	1620	if ($skip && $$rbuf =~ $skip) {
1156	$data .= substr $$rbuf, 0, $+[0], "";	1621	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1172	my ($self, $cb) = @_;	1637	my ($self, $cb) = @_;
1173		1638
1174	sub {	1639	sub {
1175	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1640	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1176	if ($_[0]{rbuf} =~ /[^0-9]/) {	1641	if ($_[0]{rbuf} =~ /[^0-9]/) {
1177	$self->_error (&Errno::EBADMSG);	1642	$_[0]->_error (Errno::EBADMSG);
1178	}	1643	}
1179	return;	1644	return;
1180	}	1645	}
1181		1646
1182	my $len = $1;	1647	my $len = $1;
1183		1648
1184	$self->unshift_read (chunk => $len, sub {	1649	$_[0]->unshift_read (chunk => $len, sub {
1185	my $string = $_[1];	1650	my $string = $_[1];
1186	$_[0]->unshift_read (chunk => 1, sub {	1651	$_[0]->unshift_read (chunk => 1, sub {
1187	if ($_[1] eq ",") {	1652	if ($_[1] eq ",") {
1188	$cb->($_[0], $string);	1653	$cb->($_[0], $string);
1189	} else {	1654	} else {
1190	$self->_error (&Errno::EBADMSG);	1655	$_[0]->_error (Errno::EBADMSG);
1191	}	1656	}
1192	});	1657	});
1193	});	1658	});
1194		1659
1195	1	1660	1
…		…
1245	=item json => $cb->($handle, $hash_or_arrayref)	1710	=item json => $cb->($handle, $hash_or_arrayref)
1246		1711
1247	Reads a JSON object or array, decodes it and passes it to the	1712	Reads a JSON object or array, decodes it and passes it to the
1248	callback. When a parse error occurs, an C<EBADMSG> error will be raised.	1713	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1249		1714
1250	If a C<json> object was passed to the constructor, then that will be used	1715	If a C<json> object was passed to the constructor, then that will be
1251	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1716	used for the final decode, otherwise it will create a L<JSON::XS> or
		1717	L<JSON::PP> coder object expecting UTF-8.
1252		1718
1253	This read type uses the incremental parser available with JSON version	1719	This read type uses the incremental parser available with JSON version
1254	2.09 (and JSON::XS version 2.2) and above. You have to provide a	1720	2.09 (and JSON::XS version 2.2) and above.
1255	dependency on your own: this module will load the JSON module, but
1256	AnyEvent does not depend on it itself.
1257		1721
1258	Since JSON texts are fully self-delimiting, the C<json> read and write	1722	Since JSON texts are fully self-delimiting, the C<json> read and write
1259	types are an ideal simple RPC protocol: just exchange JSON datagrams. See	1723	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
1260	the C<json> write type description, above, for an actual example.	1724	the C<json> write type description, above, for an actual example.
1261		1725
1262	=cut	1726	=cut
1263		1727
1264	register_read_type json => sub {	1728	register_read_type json => sub {
1265	my ($self, $cb) = @_;	1729	my ($self, $cb) = @_;
1266		1730
1267	my $json = $self->{json} ||=	1731	my $json = $self->{json} ||= json_coder;
1268	eval { require JSON::XS; JSON::XS->new->utf8 }
1269	|| do { require JSON; JSON->new->utf8 };
1270		1732
1271	my $data;	1733	my $data;
1272	my $rbuf = \$self->{rbuf};
1273		1734
1274	sub {	1735	sub {
1275	my $ref = eval { $json->incr_parse ($self->{rbuf}) };	1736	my $ref = eval { $json->incr_parse ($_[0]{rbuf}) };
1276		1737
1277	if ($ref) {	1738	if ($ref) {
1278	$self->{rbuf} = $json->incr_text;	1739	$_[0]{rbuf} = $json->incr_text;
1279	$json->incr_text = "";	1740	$json->incr_text = "";
1280	$cb->($self, $ref);	1741	$cb->($_[0], $ref);
1281		1742
1282	1	1743	1
1283	} elsif ($@) {	1744	} elsif ($@) {
1284	# error case	1745	# error case
1285	$json->incr_skip;	1746	$json->incr_skip;
1286		1747
1287	$self->{rbuf} = $json->incr_text;	1748	$_[0]{rbuf} = $json->incr_text;
1288	$json->incr_text = "";	1749	$json->incr_text = "";
1289		1750
1290	$self->_error (&Errno::EBADMSG);	1751	$_[0]->_error (Errno::EBADMSG);
1291		1752
1292	()	1753	()
1293	} else {	1754	} else {
1294	$self->{rbuf} = "";	1755	$_[0]{rbuf} = "";
1295		1756
		1757	()
		1758	}
		1759	}
		1760	};
		1761
		1762	=item cbor => $cb->($handle, $scalar)
		1763
		1764	Reads a CBOR value, decodes it and passes it to the callback. When a parse
		1765	error occurs, an C<EBADMSG> error will be raised.
		1766
		1767	If a L<CBOR::XS> object was passed to the constructor, then that will be
		1768	used for the final decode, otherwise it will create a CBOR coder without
		1769	enabling any options.
		1770
		1771	You have to provide a dependency to L<CBOR::XS> on your own: this module
		1772	will load the L<CBOR::XS> module, but AnyEvent does not depend on it
		1773	itself.
		1774
		1775	Since CBOR values are fully self-delimiting, the C<cbor> read and write
		1776	types are an ideal simple RPC protocol: just exchange CBOR datagrams. See
		1777	the C<cbor> write type description, above, for an actual example.
		1778
		1779	=cut
		1780
		1781	register_read_type cbor => sub {
		1782	my ($self, $cb) = @_;
		1783
		1784	my $cbor = $self->{cbor} ||= cbor_coder;
		1785
		1786	my $data;
		1787
		1788	sub {
		1789	my (@value) = eval { $cbor->incr_parse ($_[0]{rbuf}) };
		1790
		1791	if (@value) {
		1792	$cb->($_[0], @value);
		1793
		1794	1
		1795	} elsif ($@) {
		1796	# error case
		1797	$cbor->incr_reset;
		1798
		1799	$_[0]->_error (Errno::EBADMSG);
		1800
		1801	()
		1802	} else {
1296	()	1803	()
1297	}	1804	}
1298	}	1805	}
1299	};	1806	};
1300		1807
…		…
1309	=cut	1816	=cut
1310		1817
1311	register_read_type storable => sub {	1818	register_read_type storable => sub {
1312	my ($self, $cb) = @_;	1819	my ($self, $cb) = @_;
1313		1820
1314	require Storable;	1821	require Storable unless $Storable::VERSION;
1315		1822
1316	sub {	1823	sub {
1317	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1824	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1318	defined (my $len = eval { unpack "w", $_[0]{rbuf} })	1825	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
1319	or return;	1826	or return;
…		…
1322		1829
1323	# bypass unshift if we already have the remaining chunk	1830	# bypass unshift if we already have the remaining chunk
1324	if ($format + $len <= length $_[0]{rbuf}) {	1831	if ($format + $len <= length $_[0]{rbuf}) {
1325	my $data = substr $_[0]{rbuf}, $format, $len;	1832	my $data = substr $_[0]{rbuf}, $format, $len;
1326	substr $_[0]{rbuf}, 0, $format + $len, "";	1833	substr $_[0]{rbuf}, 0, $format + $len, "";
		1834
1327	$cb->($_[0], Storable::thaw ($data));	1835	eval { $cb->($_[0], Storable::thaw ($data)); 1 }
		1836	or return $_[0]->_error (Errno::EBADMSG);
1328	} else {	1837	} else {
1329	# remove prefix	1838	# remove prefix
1330	substr $_[0]{rbuf}, 0, $format, "";	1839	substr $_[0]{rbuf}, 0, $format, "";
1331		1840
1332	# read remaining chunk	1841	# read remaining chunk
1333	$_[0]->unshift_read (chunk => $len, sub {	1842	$_[0]->unshift_read (chunk => $len, sub {
1334	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1843	eval { $cb->($_[0], Storable::thaw ($_[1])); 1 }
1335	$cb->($_[0], $ref);
1336	} else {
1337	$self->_error (&Errno::EBADMSG);	1844	or $_[0]->_error (Errno::EBADMSG);
1338	}
1339	});	1845	});
1340	}	1846	}
1341		1847
1342	1	1848	1
1343	}	1849	}
1344	};	1850	};
1345		1851
		1852	=item tls_detect => $cb->($handle, $detect, $major, $minor)
		1853
		1854	Checks the input stream for a valid SSL or TLS handshake TLSPaintext
		1855	record without consuming anything. Only SSL version 3 or higher
		1856	is handled, up to the fictituous protocol 4.x (but both SSL3+ and
		1857	SSL2-compatible framing is supported).
		1858
		1859	If it detects that the input data is likely TLS, it calls the callback
		1860	with a true value for C<$detect> and the (on-wire) TLS version as second
		1861	and third argument (C<$major> is C<3>, and C<$minor> is 0..4 for SSL
		1862	3.0, TLS 1.0, 1.1, 1.2 and 1.3, respectively). If it detects the input
		1863	to be definitely not TLS, it calls the callback with a false value for
		1864	C<$detect>.
		1865
		1866	The callback could use this information to decide whether or not to start
		1867	TLS negotiation.
		1868
		1869	In all cases the data read so far is passed to the following read
		1870	handlers.
		1871
		1872	Usually you want to use the C<tls_autostart> read type instead.
		1873
		1874	If you want to design a protocol that works in the presence of TLS
		1875	dtection, make sure that any non-TLS data doesn't start with the octet 22
		1876	(ASCII SYN, 16 hex) or 128-255 (i.e. highest bit set). The checks this
		1877	read type does are a bit more strict, but might losen in the future to
		1878	accomodate protocol changes.
		1879
		1880	This read type does not rely on L<AnyEvent::TLS> (and thus, not on
		1881	L<Net::SSLeay>).
		1882
		1883	=item tls_autostart => [$tls_ctx, ]$tls
		1884
		1885	Tries to detect a valid SSL or TLS handshake. If one is detected, it tries
		1886	to start tls by calling C<starttls> with the given arguments.
		1887
		1888	In practise, C<$tls> must be C<accept>, or a Net::SSLeay context that has
		1889	been configured to accept, as servers do not normally send a handshake on
		1890	their own and ths cannot be detected in this way.
		1891
		1892	See C<tls_detect> above for more details.
		1893
		1894	Example: give the client a chance to start TLS before accepting a text
		1895	line.
		1896
		1897	$hdl->push_read (tls_autostart => "accept");
		1898	$hdl->push_read (line => sub {
		1899	print "received ", ($_[0]{tls} ? "encrypted" : "cleartext"), " <$_[1]>\n";
		1900	});
		1901
		1902	=cut
		1903
		1904	register_read_type tls_detect => sub {
		1905	my ($self, $cb) = @_;
		1906
		1907	sub {
		1908	# this regex matches a full or partial tls record
		1909	if (
		1910	# ssl3+: type(22=handshake) major(=3) minor(any) length_hi
		1911	$self->{rbuf} =~ /^(?:\z| \x16 (\z| [\x03\x04] (?:\z| . (?:\z| [\x00-\x40] ))))/xs
		1912	# ssl2 comapatible: len_hi len_lo type(1) major minor dummy(forlength)
		1913	or $self->{rbuf} =~ /^(?:\z| [\x80-\xff] (?:\z| . (?:\z| \x01 (\z| [\x03\x04] (?:\z| . (?:\z| . ))))))/xs
		1914	) {
		1915	return if 3 != length $1; # partial match, can't decide yet
		1916
		1917	# full match, valid TLS record
		1918	my ($major, $minor) = unpack "CC", $1;
		1919	$cb->($self, "accept", $major, $minor);
		1920	} else {
		1921	# mismatch == guaranteed not TLS
		1922	$cb->($self, undef);
		1923	}
		1924
		1925	1
		1926	}
		1927	};
		1928
		1929	register_read_type tls_autostart => sub {
		1930	my ($self, @tls) = @_;
		1931
		1932	$RH{tls_detect}($self, sub {
		1933	return unless $_[1];
		1934	$_[0]->starttls (@tls);
		1935	})
		1936	};
		1937
1346	=back	1938	=back
1347		1939
1348	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1940	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1349		1941
1350	This function (not method) lets you add your own types to C<push_read>.	1942	Instead of one of the predefined types, you can also specify the name
		1943	of a package. AnyEvent will try to load the package and then expects to
		1944	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1945	progressively tries to load the parent package until it either finds the
		1946	function (good) or runs out of packages (bad).
1351		1947
1352	Whenever the given C<type> is used, C<push_read> will invoke the code	1948	Whenever this type is used, C<push_read> will invoke the function with the
1353	reference with the handle object, the callback and the remaining	1949	handle object, the original callback and the remaining arguments.
1354	arguments.
1355		1950
1356	The code reference is supposed to return a callback (usually a closure)	1951	The function is supposed to return a callback (usually a closure) that
1357	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1952	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1953	mentally treat the function as a "configurable read type to read callback"
		1954	converter.
1358		1955
1359	It should invoke the passed callback when it is done reading (remember to	1956	It should invoke the original callback when it is done reading (remember
1360	pass C<$handle> as first argument as all other callbacks do that).	1957	to pass C<$handle> as first argument as all other callbacks do that,
		1958	although there is no strict requirement on this).
1361		1959
1362	Note that this is a function, and all types registered this way will be
1363	global, so try to use unique names.
1364
1365	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1960	For examples, see the source of this module (F<perldoc -m
1366	search for C<register_read_type>)).	1961	AnyEvent::Handle>, search for C<register_read_type>)).
1367		1962
1368	=item $handle->stop_read	1963	=item $handle->stop_read
1369		1964
1370	=item $handle->start_read	1965	=item $handle->start_read
1371		1966
…		…
1377	Note that AnyEvent::Handle will automatically C<start_read> for you when	1972	Note that AnyEvent::Handle will automatically C<start_read> for you when
1378	you change the C<on_read> callback or push/unshift a read callback, and it	1973	you change the C<on_read> callback or push/unshift a read callback, and it
1379	will automatically C<stop_read> for you when neither C<on_read> is set nor	1974	will automatically C<stop_read> for you when neither C<on_read> is set nor
1380	there are any read requests in the queue.	1975	there are any read requests in the queue.
1381		1976
1382	These methods will have no effect when in TLS mode (as TLS doesn't support	1977	In older versions of this module (<= 5.3), these methods had no effect,
1383	half-duplex connections).	1978	as TLS does not support half-duplex connections. In current versions they
		1979	work as expected, as this behaviour is required to avoid certain resource
		1980	attacks, where the program would be forced to read (and buffer) arbitrary
		1981	amounts of data before being able to send some data. The drawback is that
		1982	some readings of the the SSL/TLS specifications basically require this
		1983	attack to be working, as SSL/TLS implementations might stall sending data
		1984	during a rehandshake.
		1985
		1986	As a guideline, during the initial handshake, you should not stop reading,
		1987	and as a client, it might cause problems, depending on your application.
1384		1988
1385	=cut	1989	=cut
1386		1990
1387	sub stop_read {	1991	sub stop_read {
1388	my ($self) = @_;	1992	my ($self) = @_;
1389		1993
1390	delete $self->{_rw} unless $self->{tls};	1994	delete $self->{_rw};
1391	}	1995	}
1392		1996
1393	sub start_read {	1997	sub start_read {
1394	my ($self) = @_;	1998	my ($self) = @_;
1395		1999
1396	unless ($self->{_rw} || $self->{_eof}) {	2000	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1397	Scalar::Util::weaken $self;	2001	Scalar::Util::weaken $self;
1398		2002
1399	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	2003	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1400	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});	2004	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1401	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	2005	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1402		2006
1403	if ($len > 0) {	2007	if ($len > 0) {
1404	$self->{_activity} = AnyEvent->now;	2008	$self->{_activity} = $self->{_ractivity} = AE::now;
1405		2009
1406	if ($self->{tls}) {	2010	if ($self->{tls}) {
1407	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);	2011	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1408		2012
1409	&_dotls ($self);	2013	&_dotls ($self);
1410	} else {	2014	} else {
1411	$self->_drain_rbuf unless $self->{_in_drain};	2015	$self->_drain_rbuf;
		2016	}
		2017
		2018	if ($len == $self->{read_size}) {
		2019	$self->{read_size} *= 2;
		2020	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		2021	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
1412	}	2022	}
1413		2023
1414	} elsif (defined $len) {	2024	} elsif (defined $len) {
1415	delete $self->{_rw};	2025	delete $self->{_rw};
1416	$self->{_eof} = 1;	2026	$self->{_eof} = 1;
1417	$self->_drain_rbuf unless $self->{_in_drain};	2027	$self->_drain_rbuf;
1418		2028
1419	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	2029	} elsif ($! != EAGAIN && $! != EINTR && $! != EWOULDBLOCK && $! != WSAEWOULDBLOCK) {
1420	return $self->_error ($!, 1);	2030	return $self->_error ($!, 1);
1421	}	2031	}
1422	});	2032	};
1423	}	2033	}
1424	}	2034	}
1425		2035
1426	our $ERROR_SYSCALL;	2036	our $ERROR_SYSCALL;
1427	our $ERROR_WANT_READ;	2037	our $ERROR_WANT_READ;
…		…
1430	my ($self, $err) = @_;	2040	my ($self, $err) = @_;
1431		2041
1432	return $self->_error ($!, 1)	2042	return $self->_error ($!, 1)
1433	if $err == Net::SSLeay::ERROR_SYSCALL ();	2043	if $err == Net::SSLeay::ERROR_SYSCALL ();
1434		2044
1435	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());	2045	my $err = Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
1436		2046
1437	# reduce error string to look less scary	2047	# reduce error string to look less scary
1438	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;	2048	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
1439		2049
		2050	if ($self->{_on_starttls}) {
		2051	(delete $self->{_on_starttls})->($self, undef, $err);
		2052	&_freetls;
		2053	} else {
		2054	&_freetls;
1440	$self->_error (&Errno::EPROTO, 1, $err);	2055	$self->_error (Errno::EPROTO, 1, $err);
		2056	}
1441	}	2057	}
1442		2058
1443	# poll the write BIO and send the data if applicable	2059	# poll the write BIO and send the data if applicable
1444	# also decode read data if possible	2060	# also decode read data if possible
1445	# this is basiclaly our TLS state machine	2061	# this is basiclaly our TLS state machine
…		…
1448	sub _dotls {	2064	sub _dotls {
1449	my ($self) = @_;	2065	my ($self) = @_;
1450		2066
1451	my $tmp;	2067	my $tmp;
1452		2068
1453	if (length $self->{_tls_wbuf}) {	2069	while (length $self->{_tls_wbuf}) {
1454	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	2070	if (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) <= 0) {
1455	substr $self->{_tls_wbuf}, 0, $tmp, "";	2071	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		2072
		2073	return $self->_tls_error ($tmp)
		2074	if $tmp != $ERROR_WANT_READ
		2075	&& ($tmp != $ERROR_SYSCALL || $!);
		2076
		2077	last;
1456	}	2078	}
1457		2079
1458	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);	2080	substr $self->{_tls_wbuf}, 0, $tmp, "";
1459	return $self->_tls_error ($tmp)
1460	if $tmp != $ERROR_WANT_READ
1461	&& ($tmp != $ERROR_SYSCALL || $!);
1462	}	2081	}
1463		2082
1464	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {	2083	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1465	unless (length $tmp) {	2084	unless (length $tmp) {
		2085	$self->{_on_starttls}
		2086	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
1466	&_freetls;	2087	&_freetls;
		2088
1467	if ($self->{on_stoptls}) {	2089	if ($self->{on_stoptls}) {
1468	$self->{on_stoptls}($self);	2090	$self->{on_stoptls}($self);
1469	return;	2091	return;
1470	} else {	2092	} else {
1471	# let's treat SSL-eof as we treat normal EOF	2093	# let's treat SSL-eof as we treat normal EOF
…		…
1473	$self->{_eof} = 1;	2095	$self->{_eof} = 1;
1474	}	2096	}
1475	}	2097	}
1476		2098
1477	$self->{_tls_rbuf} .= $tmp;	2099	$self->{_tls_rbuf} .= $tmp;
1478	$self->_drain_rbuf unless $self->{_in_drain};	2100	$self->_drain_rbuf;
1479	$self->{tls} or return; # tls session might have gone away in callback	2101	$self->{tls} or return; # tls session might have gone away in callback
1480	}	2102	}
1481		2103
1482	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);	2104	$tmp = Net::SSLeay::get_error ($self->{tls}, -1); # -1 is not neccessarily correct, but Net::SSLeay doesn't tell us
1483	return $self->_tls_error ($tmp)	2105	return $self->_tls_error ($tmp)
1484	if $tmp != $ERROR_WANT_READ	2106	if $tmp != $ERROR_WANT_READ
1485	&& ($tmp != $ERROR_SYSCALL || $!);	2107	&& ($tmp != $ERROR_SYSCALL || $!);
1486		2108
1487	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {	2109	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1488	$self->{wbuf} .= $tmp;	2110	$self->{wbuf} .= $tmp;
1489	$self->_drain_wbuf;	2111	$self->_drain_wbuf;
		2112	$self->{tls} or return; # tls session might have gone away in callback
1490	}	2113	}
1491		2114
1492	$self->{_on_starttls}	2115	$self->{_on_starttls}
1493	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()	2116	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1494	and (delete $self->{_on_starttls})->($self, 1);	2117	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1495	}	2118	}
1496		2119
1497	=item $handle->starttls ($tls[, $tls_ctx])	2120	=item $handle->starttls ($tls[, $tls_ctx])
1498		2121
1499	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	2122	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1500	object is created, you can also do that at a later time by calling	2123	object is created, you can also do that at a later time by calling
1501	C<starttls>.	2124	C<starttls>. See the C<tls> constructor argument for general info.
		2125
		2126	Starting TLS is currently an asynchronous operation - when you push some
		2127	write data and then call C<< ->starttls >> then TLS negotiation will start
		2128	immediately, after which the queued write data is then sent. This might
		2129	change in future versions, so best make sure you have no outstanding write
		2130	data when calling this method.
1502		2131
1503	The first argument is the same as the C<tls> constructor argument (either	2132	The first argument is the same as the C<tls> constructor argument (either
1504	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	2133	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1505		2134
1506	The second argument is the optional C<AnyEvent::TLS> object that is used	2135	The second argument is the optional C<AnyEvent::TLS> object that is used
…		…
1511	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS	2140	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1512	context in C<< $handle->{tls_ctx} >> after this call and can be used or	2141	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1513	changed to your liking. Note that the handshake might have already started	2142	changed to your liking. Note that the handshake might have already started
1514	when this function returns.	2143	when this function returns.
1515		2144
1516	If it an error to start a TLS handshake more than once per	2145	Due to bugs in OpenSSL, it might or might not be possible to do multiple
1517	AnyEvent::Handle object (this is due to bugs in OpenSSL).	2146	handshakes on the same stream. It is best to not attempt to use the
		2147	stream after stopping TLS.
		2148
		2149	This method may invoke callbacks (and therefore the handle might be
		2150	destroyed after it returns).
1518		2151
1519	=cut	2152	=cut
1520		2153
1521	our %TLS_CACHE; #TODO not yet documented, should we?	2154	our %TLS_CACHE; #TODO not yet documented, should we?
1522		2155
1523	sub starttls {	2156	sub starttls {
1524	my ($self, $ssl, $ctx) = @_;	2157	my ($self, $tls, $ctx) = @_;
1525		2158
1526	require Net::SSLeay;	2159	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
1527
1528	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"
1529	if $self->{tls};	2160	if $self->{tls};
		2161
		2162	unless (defined $AnyEvent::TLS::VERSION) {
		2163	eval {
		2164	require Net::SSLeay;
		2165	require AnyEvent::TLS;
		2166	1
		2167	} or return $self->_error (Errno::EPROTO, 1, "TLS support not available on this system");
		2168	}
		2169
		2170	$self->{tls} = $tls;
		2171	$self->{tls_ctx} = $ctx if @_ > 2;
		2172
		2173	return unless $self->{fh};
1530		2174
1531	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();	2175	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1532	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();	2176	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
1533		2177
		2178	$tls = delete $self->{tls};
1534	$ctx ||= $self->{tls_ctx};	2179	$ctx = $self->{tls_ctx};
		2180
		2181	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
1535		2182
1536	if ("HASH" eq ref $ctx) {	2183	if ("HASH" eq ref $ctx) {
1537	require AnyEvent::TLS;
1538
1539	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context
1540
1541	if ($ctx->{cache}) {	2184	if ($ctx->{cache}) {
1542	my $key = $ctx+0;	2185	my $key = $ctx+0;
1543	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;	2186	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
1544	} else {	2187	} else {
1545	$ctx = new AnyEvent::TLS %$ctx;	2188	$ctx = new AnyEvent::TLS %$ctx;
1546	}	2189	}
1547	}	2190	}
1548		2191
1549	$self->{tls_ctx} = $ctx || TLS_CTX ();	2192	$self->{tls_ctx} = $ctx || TLS_CTX ();
1550	$self->{tls} = $ssl = $self->{tls_ctx}->_get_session ($ssl, $self, $self->{peername});	2193	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1551		2194
1552	# basically, this is deep magic (because SSL_read should have the same issues)	2195	# basically, this is deep magic (because SSL_read should have the same issues)
1553	# but the openssl maintainers basically said: "trust us, it just works".	2196	# but the openssl maintainers basically said: "trust us, it just works".
1554	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	2197	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1555	# and mismaintained ssleay-module doesn't even offer them).	2198	# and mismaintained ssleay-module didn't offer them for a decade or so).
1556	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	2199	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
1557	#	2200	#
1558	# in short: this is a mess.	2201	# in short: this is a mess.
1559	#	2202	#
1560	# note that we do not try to keep the length constant between writes as we are required to do.	2203	# note that we do not try to keep the length constant between writes as we are required to do.
1561	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	2204	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1562	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to	2205	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
1563	# have identity issues in that area.	2206	# have identity issues in that area.
1564	# Net::SSLeay::CTX_set_mode ($ssl,	2207	# Net::SSLeay::set_mode ($ssl,
1565	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	2208	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1566	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	2209	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
1567	Net::SSLeay::CTX_set_mode ($ssl, 1|2);	2210	Net::SSLeay::set_mode ($tls, 1|2);
1568		2211
1569	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2212	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1570	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2213	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1571		2214
		2215	Net::SSLeay::BIO_write ($self->{_rbio}, $self->{rbuf});
		2216	$self->{rbuf} = "";
		2217
1572	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	2218	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1573		2219
1574	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }	2220	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1575	if exists $self->{on_starttls};	2221	if $self->{on_starttls};
1576		2222
1577	&_dotls; # need to trigger the initial handshake	2223	&_dotls; # need to trigger the initial handshake
1578	$self->start_read; # make sure we actually do read	2224	$self->start_read; # make sure we actually do read
1579	}	2225	}
1580		2226
1581	=item $handle->stoptls	2227	=item $handle->stoptls
1582		2228
1583	Shuts down the SSL connection - this makes a proper EOF handshake by	2229	Shuts down the SSL connection - this makes a proper EOF handshake by
1584	sending a close notify to the other side, but since OpenSSL doesn't	2230	sending a close notify to the other side, but since OpenSSL doesn't
1585	support non-blocking shut downs, it is not possible to re-use the stream	2231	support non-blocking shut downs, it is not guaranteed that you can re-use
1586	afterwards.	2232	the stream afterwards.
		2233
		2234	This method may invoke callbacks (and therefore the handle might be
		2235	destroyed after it returns).
1587		2236
1588	=cut	2237	=cut
1589		2238
1590	sub stoptls {	2239	sub stoptls {
1591	my ($self) = @_;	2240	my ($self) = @_;
1592		2241
1593	if ($self->{tls}) {	2242	if ($self->{tls} && $self->{fh}) {
1594	Net::SSLeay::shutdown ($self->{tls});	2243	Net::SSLeay::shutdown ($self->{tls});
1595		2244
1596	&_dotls;	2245	&_dotls;
1597		2246
1598	# # we don't give a shit. no, we do, but we can't. no...#d#	2247	# # we don't give a shit. no, we do, but we can't. no...#d#
…		…
1604	sub _freetls {	2253	sub _freetls {
1605	my ($self) = @_;	2254	my ($self) = @_;
1606		2255
1607	return unless $self->{tls};	2256	return unless $self->{tls};
1608		2257
1609	$self->{_on_starttls}
1610	and (delete $self->{_on_starttls})->($self, undef);
1611
1612	$self->{tls_ctx}->_put_session (delete $self->{tls});	2258	$self->{tls_ctx}->_put_session (delete $self->{tls})
1613		2259	if $self->{tls} > 0;
		2260
1614	delete @$self{qw(_rbio _wbio _tls_wbuf)};	2261	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1615	}	2262	}
		2263
		2264	=item $handle->resettls
		2265
		2266	This rarely-used method simply resets and TLS state on the handle, usually
		2267	causing data loss.
		2268
		2269	One case where it may be useful is when you want to skip over the data in
		2270	the stream but you are not interested in interpreting it, so data loss is
		2271	no concern.
		2272
		2273	=cut
		2274
		2275	*resettls = \&_freetls;
1616		2276
1617	sub DESTROY {	2277	sub DESTROY {
1618	my ($self) = @_;	2278	my ($self) = @_;
1619		2279
1620	&_freetls;	2280	&_freetls;
1621		2281
1622	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2282	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1623		2283
1624	if ($linger && length $self->{wbuf}) {	2284	if ($linger && length $self->{wbuf} && $self->{fh}) {
1625	my $fh = delete $self->{fh};	2285	my $fh = delete $self->{fh};
1626	my $wbuf = delete $self->{wbuf};	2286	my $wbuf = delete $self->{wbuf};
1627		2287
1628	my @linger;	2288	my @linger;
1629		2289
1630	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2290	push @linger, AE::io $fh, 1, sub {
1631	my $len = syswrite $fh, $wbuf, length $wbuf;	2291	my $len = syswrite $fh, $wbuf, length $wbuf;
1632		2292
1633	if ($len > 0) {	2293	if ($len > 0) {
1634	substr $wbuf, 0, $len, "";	2294	substr $wbuf, 0, $len, "";
1635	} else {	2295	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != EWOULDBLOCK && $! != WSAEWOULDBLOCK)) {
1636	@linger = (); # end	2296	@linger = (); # end
1637	}	2297	}
1638	});	2298	};
1639	push @linger, AnyEvent->timer (after => $linger, cb => sub {	2299	push @linger, AE::timer $linger, 0, sub {
1640	@linger = ();	2300	@linger = ();
1641	});	2301	};
1642	}	2302	}
1643	}	2303	}
1644		2304
1645	=item $handle->destroy	2305	=item $handle->destroy
1646		2306
1647	Shuts down the handle object as much as possible - this call ensures that	2307	Shuts down the handle object as much as possible - this call ensures that
1648	no further callbacks will be invoked and as many resources as possible	2308	no further callbacks will be invoked and as many resources as possible
1649	will be freed. You must not call any methods on the object afterwards.	2309	will be freed. Any method you will call on the handle object after
		2310	destroying it in this way will be silently ignored (and it will return the
		2311	empty list).
1650		2312
1651	Normally, you can just "forget" any references to an AnyEvent::Handle	2313	Normally, you can just "forget" any references to an AnyEvent::Handle
1652	object and it will simply shut down. This works in fatal error and EOF	2314	object and it will simply shut down. This works in fatal error and EOF
1653	callbacks, as well as code outside. It does I<NOT> work in a read or write	2315	callbacks, as well as code outside. It does I<NOT> work in a read or write
1654	callback, so when you want to destroy the AnyEvent::Handle object from	2316	callback, so when you want to destroy the AnyEvent::Handle object from
1655	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in	2317	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
1656	that case.	2318	that case.
1657		2319
		2320	Destroying the handle object in this way has the advantage that callbacks
		2321	will be removed as well, so if those are the only reference holders (as
		2322	is common), then one doesn't need to do anything special to break any
		2323	reference cycles.
		2324
1658	The handle might still linger in the background and write out remaining	2325	The handle might still linger in the background and write out remaining
1659	data, as specified by the C<linger> option, however.	2326	data, as specified by the C<linger> option, however.
1660		2327
1661	=cut	2328	=cut
1662		2329
1663	sub destroy {	2330	sub destroy {
1664	my ($self) = @_;	2331	my ($self) = @_;
1665		2332
1666	$self->DESTROY;	2333	$self->DESTROY;
1667	%$self = ();	2334	%$self = ();
		2335	bless $self, "AnyEvent::Handle::destroyed";
1668	}	2336	}
		2337
		2338	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2339	#nop
		2340	}
		2341
		2342	=item $handle->destroyed
		2343
		2344	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2345	->destroy >>, true otherwise.
		2346
		2347	Can be useful to decide whether the handle is still valid after some
		2348	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2349	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2350	can destroy the handle, so work can be avoided by checking sometimes:
		2351
		2352	$hdl->starttls ("accept");
		2353	return if $hdl->destroyed;
		2354	$hdl->push_write (...
		2355
		2356	Note that the call to C<push_write> will silently be ignored if the handle
		2357	has been destroyed, so often you can just ignore the possibility of the
		2358	handle being destroyed.
		2359
		2360	=cut
		2361
		2362	sub destroyed { 0 }
		2363	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1669		2364
1670	=item AnyEvent::Handle::TLS_CTX	2365	=item AnyEvent::Handle::TLS_CTX
1671		2366
1672	This function creates and returns the AnyEvent::TLS object used by default	2367	This function creates and returns the AnyEvent::TLS object used by default
1673	for TLS mode.	2368	for TLS mode.
…		…
1701		2396
1702	It is only safe to "forget" the reference inside EOF or error callbacks,	2397	It is only safe to "forget" the reference inside EOF or error callbacks,
1703	from within all other callbacks, you need to explicitly call the C<<	2398	from within all other callbacks, you need to explicitly call the C<<
1704	->destroy >> method.	2399	->destroy >> method.
1705		2400
		2401	=item Why is my C<on_eof> callback never called?
		2402
		2403	Probably because your C<on_error> callback is being called instead: When
		2404	you have outstanding requests in your read queue, then an EOF is
		2405	considered an error as you clearly expected some data.
		2406
		2407	To avoid this, make sure you have an empty read queue whenever your handle
		2408	is supposed to be "idle" (i.e. connection closes are O.K.). You can set
		2409	an C<on_read> handler that simply pushes the first read requests in the
		2410	queue.
		2411
		2412	See also the next question, which explains this in a bit more detail.
		2413
		2414	=item How can I serve requests in a loop?
		2415
		2416	Most protocols consist of some setup phase (authentication for example)
		2417	followed by a request handling phase, where the server waits for requests
		2418	and handles them, in a loop.
		2419
		2420	There are two important variants: The first (traditional, better) variant
		2421	handles requests until the server gets some QUIT command, causing it to
		2422	close the connection first (highly desirable for a busy TCP server). A
		2423	client dropping the connection is an error, which means this variant can
		2424	detect an unexpected detection close.
		2425
		2426	To handle this case, always make sure you have a non-empty read queue, by
		2427	pushing the "read request start" handler on it:
		2428
		2429	# we assume a request starts with a single line
		2430	my @start_request; @start_request = (line => sub {
		2431	my ($hdl, $line) = @_;
		2432
		2433	... handle request
		2434
		2435	# push next request read, possibly from a nested callback
		2436	$hdl->push_read (@start_request);
		2437	});
		2438
		2439	# auth done, now go into request handling loop
		2440	# now push the first @start_request
		2441	$hdl->push_read (@start_request);
		2442
		2443	By always having an outstanding C<push_read>, the handle always expects
		2444	some data and raises the C<EPIPE> error when the connction is dropped
		2445	unexpectedly.
		2446
		2447	The second variant is a protocol where the client can drop the connection
		2448	at any time. For TCP, this means that the server machine may run out of
		2449	sockets easier, and in general, it means you cannot distinguish a protocl
		2450	failure/client crash from a normal connection close. Nevertheless, these
		2451	kinds of protocols are common (and sometimes even the best solution to the
		2452	problem).
		2453
		2454	Having an outstanding read request at all times is possible if you ignore
		2455	C<EPIPE> errors, but this doesn't help with when the client drops the
		2456	connection during a request, which would still be an error.
		2457
		2458	A better solution is to push the initial request read in an C<on_read>
		2459	callback. This avoids an error, as when the server doesn't expect data
		2460	(i.e. is idly waiting for the next request, an EOF will not raise an
		2461	error, but simply result in an C<on_eof> callback. It is also a bit slower
		2462	and simpler:
		2463
		2464	# auth done, now go into request handling loop
		2465	$hdl->on_read (sub {
		2466	my ($hdl) = @_;
		2467
		2468	# called each time we receive data but the read queue is empty
		2469	# simply start read the request
		2470
		2471	$hdl->push_read (line => sub {
		2472	my ($hdl, $line) = @_;
		2473
		2474	... handle request
		2475
		2476	# do nothing special when the request has been handled, just
		2477	# let the request queue go empty.
		2478	});
		2479	});
		2480
1706	=item I get different callback invocations in TLS mode/Why can't I pause	2481	=item I get different callback invocations in TLS mode/Why can't I pause
1707	reading?	2482	reading?
1708		2483
1709	Unlike, say, TCP, TLS connections do not consist of two independent	2484	Unlike, say, TCP, TLS connections do not consist of two independent
1710	communication channels, one for each direction. Or put differently. The	2485	communication channels, one for each direction. Or put differently, the
1711	read and write directions are not independent of each other: you cannot	2486	read and write directions are not independent of each other: you cannot
1712	write data unless you are also prepared to read, and vice versa.	2487	write data unless you are also prepared to read, and vice versa.
1713		2488
1714	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>	2489	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
1715	callback invocations when you are not expecting any read data - the reason	2490	callback invocations when you are not expecting any read data - the reason
1716	is that AnyEvent::Handle always reads in TLS mode.	2491	is that AnyEvent::Handle always reads in TLS mode.
1717		2492
1718	During the connection, you have to make sure that you always have a	2493	During the connection, you have to make sure that you always have a
1719	non-empty read-queue, or an C<on_read> watcher. At the end of the	2494	non-empty read-queue, or an C<on_read> watcher. At the end of the
…		…
1729		2504
1730	$handle->on_read (sub { });	2505	$handle->on_read (sub { });
1731	$handle->on_eof (undef);	2506	$handle->on_eof (undef);
1732	$handle->on_error (sub {	2507	$handle->on_error (sub {
1733	my $data = delete $_[0]{rbuf};	2508	my $data = delete $_[0]{rbuf};
1734	undef $handle;
1735	});	2509	});
		2510
		2511	Note that this example removes the C<rbuf> member from the handle object,
		2512	which is not normally allowed by the API. It is expressly permitted in
		2513	this case only, as the handle object needs to be destroyed afterwards.
1736		2514
1737	The reason to use C<on_error> is that TCP connections, due to latencies	2515	The reason to use C<on_error> is that TCP connections, due to latencies
1738	and packets loss, might get closed quite violently with an error, when in	2516	and packets loss, might get closed quite violently with an error, when in
1739	fact, all data has been received.	2517	fact all data has been received.
1740		2518
1741	It is usually better to use acknowledgements when transferring data,	2519	It is usually better to use acknowledgements when transferring data,
1742	to make sure the other side hasn't just died and you got the data	2520	to make sure the other side hasn't just died and you got the data
1743	intact. This is also one reason why so many internet protocols have an	2521	intact. This is also one reason why so many internet protocols have an
1744	explicit QUIT command.	2522	explicit QUIT command.
…		…
1751	C<low_water_mark> this will be called precisely when all data has been	2529	C<low_water_mark> this will be called precisely when all data has been
1752	written to the socket:	2530	written to the socket:
1753		2531
1754	$handle->push_write (...);	2532	$handle->push_write (...);
1755	$handle->on_drain (sub {	2533	$handle->on_drain (sub {
1756	warn "all data submitted to the kernel\n";	2534	AE::log debug => "All data submitted to the kernel.";
1757	undef $handle;	2535	undef $handle;
1758	});	2536	});
1759		2537
		2538	If you just want to queue some data and then signal EOF to the other side,
		2539	consider using C<< ->push_shutdown >> instead.
		2540
		2541	=item I want to contact a TLS/SSL server, I don't care about security.
		2542
		2543	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2544	connect to it and then create the AnyEvent::Handle with the C<tls>
		2545	parameter:
		2546
		2547	tcp_connect $host, $port, sub {
		2548	my ($fh) = @_;
		2549
		2550	my $handle = new AnyEvent::Handle
		2551	fh => $fh,
		2552	tls => "connect",
		2553	on_error => sub { ... };
		2554
		2555	$handle->push_write (...);
		2556	};
		2557
		2558	=item I want to contact a TLS/SSL server, I do care about security.
		2559
		2560	Then you should additionally enable certificate verification, including
		2561	peername verification, if the protocol you use supports it (see
		2562	L<AnyEvent::TLS>, C<verify_peername>).
		2563
		2564	E.g. for HTTPS:
		2565
		2566	tcp_connect $host, $port, sub {
		2567	my ($fh) = @_;
		2568
		2569	my $handle = new AnyEvent::Handle
		2570	fh => $fh,
		2571	peername => $host,
		2572	tls => "connect",
		2573	tls_ctx => { verify => 1, verify_peername => "https" },
		2574	...
		2575
		2576	Note that you must specify the hostname you connected to (or whatever
		2577	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2578	peername verification will be done.
		2579
		2580	The above will use the system-dependent default set of trusted CA
		2581	certificates. If you want to check against a specific CA, add the
		2582	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2583
		2584	tls_ctx => {
		2585	verify => 1,
		2586	verify_peername => "https",
		2587	ca_file => "my-ca-cert.pem",
		2588	},
		2589
		2590	=item I want to create a TLS/SSL server, how do I do that?
		2591
		2592	Well, you first need to get a server certificate and key. You have
		2593	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2594	self-signed certificate (cheap. check the search engine of your choice,
		2595	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2596	nice program for that purpose).
		2597
		2598	Then create a file with your private key (in PEM format, see
		2599	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2600	file should then look like this:
		2601
		2602	-----BEGIN RSA PRIVATE KEY-----
		2603	...header data
		2604	... lots of base64'y-stuff
		2605	-----END RSA PRIVATE KEY-----
		2606
		2607	-----BEGIN CERTIFICATE-----
		2608	... lots of base64'y-stuff
		2609	-----END CERTIFICATE-----
		2610
		2611	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2612	specify this file as C<cert_file>:
		2613
		2614	tcp_server undef, $port, sub {
		2615	my ($fh) = @_;
		2616
		2617	my $handle = new AnyEvent::Handle
		2618	fh => $fh,
		2619	tls => "accept",
		2620	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2621	...
		2622
		2623	When you have intermediate CA certificates that your clients might not
		2624	know about, just append them to the C<cert_file>.
		2625
1760	=back	2626	=back
1761
1762		2627
1763	=head1 SUBCLASSING AnyEvent::Handle	2628	=head1 SUBCLASSING AnyEvent::Handle
1764		2629
1765	In many cases, you might want to subclass AnyEvent::Handle.	2630	In many cases, you might want to subclass AnyEvent::Handle.
1766		2631
…		…
1783		2648
1784	=item * all members not documented here and not prefixed with an underscore	2649	=item * all members not documented here and not prefixed with an underscore
1785	are free to use in subclasses.	2650	are free to use in subclasses.
1786		2651
1787	Of course, new versions of AnyEvent::Handle may introduce more "public"	2652	Of course, new versions of AnyEvent::Handle may introduce more "public"
1788	member variables, but thats just life, at least it is documented.	2653	member variables, but that's just life. At least it is documented.
1789		2654
1790	=back	2655	=back
1791		2656
1792	=head1 AUTHOR	2657	=head1 AUTHOR
1793		2658
1794	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	2659	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
1795		2660
1796	=cut	2661	=cut
1797		2662
1798	1; # End of AnyEvent::Handle	2663	1
		2664

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines