[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.1 by elmex, Sun Apr 27 16:56:17 2008 UTC vs.
Revision 1.31 by root, Sun May 25 00:08:49 2008 UTC

1	package AnyEvent::Handle;	1	package AnyEvent::Handle;
2		2
3	use warnings;	3	no warnings;
4	use strict;	4	use strict;
5		5
6	use AnyEvent;	6	use AnyEvent ();
7	use IO::Handle;	7	use AnyEvent::Util ();
		8	use Scalar::Util ();
		9	use Carp ();
		10	use Fcntl ();
8	use Errno qw/EAGAIN EINTR/;	11	use Errno qw/EAGAIN EINTR/;
9		12
10	=head1 NAME	13	=head1 NAME
11		14
12	AnyEvent::Handle - non-blocking I/O on filehandles via AnyEvent	15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
13		16
14	=head1 VERSION
15
16	Version 0.01
17
18	=cut	17	=cut
19		18
20	our $VERSION = '0.01';	19	our $VERSION = '0.04';
21		20
22	=head1 SYNOPSIS	21	=head1 SYNOPSIS
23		22
24	use AnyEvent;	23	use AnyEvent;
25	use AnyEvent::Handle;	24	use AnyEvent::Handle;
26		25
27	my $cv = AnyEvent->condvar;	26	my $cv = AnyEvent->condvar;
28		27
29	my $ae_fh = AnyEvent::Handle->new (fh => \*STDIN);	28	my $handle =
		29	AnyEvent::Handle->new (
		30	fh => \*STDIN,
		31	on_eof => sub {
		32	$cv->broadcast;
		33	},
		34	);
30		35
31	$ae_fh->readlines (sub {	36	# send some request line
		37	$handle->push_write ("getinfo\015\012");
		38
		39	# read the response line
		40	$handle->push_read (line => sub {
32	my ($ae_fh, @lines) = @_;	41	my ($handle, $line) = @_;
33	for (@lines) {	42	warn "read line <$line>\n";
34	chomp;	43	$cv->send;
35	print "Line: $_";	44	});
		45
		46	$cv->recv;
		47
		48	=head1 DESCRIPTION
		49
		50	This module is a helper module to make it easier to do event-based I/O on
		51	filehandles. For utility functions for doing non-blocking connects and accepts
		52	on sockets see L<AnyEvent::Util>.
		53
		54	In the following, when the documentation refers to of "bytes" then this
		55	means characters. As sysread and syswrite are used for all I/O, their
		56	treatment of characters applies to this module as well.
		57
		58	All callbacks will be invoked with the handle object as their first
		59	argument.
		60
		61	=head1 METHODS
		62
		63	=over 4
		64
		65	=item B<new (%args)>
		66
		67	The constructor supports these arguments (all as key => value pairs).
		68
		69	=over 4
		70
		71	=item fh => $filehandle [MANDATORY]
		72
		73	The filehandle this L<AnyEvent::Handle> object will operate on.
		74
		75	NOTE: The filehandle will be set to non-blocking (using
		76	AnyEvent::Util::fh_nonblocking).
		77
		78	=item on_eof => $cb->($self)
		79
		80	Set the callback to be called on EOF.
		81
		82	While not mandatory, it is highly recommended to set an eof callback,
		83	otherwise you might end up with a closed socket while you are still
		84	waiting for data.
		85
		86	=item on_error => $cb->($self)
		87
		88	This is the fatal error callback, that is called when, well, a fatal error
		89	occurs, such as not being able to resolve the hostname, failure to connect
		90	or a read error.
		91
		92	The object will not be in a usable state when this callback has been
		93	called.
		94
		95	On callback entrance, the value of C<$!> contains the operating system
		96	error (or C<ENOSPC>, C<EPIPE> or C<EBADMSG>).
		97
		98	While not mandatory, it is I<highly> recommended to set this callback, as
		99	you will not be notified of errors otherwise. The default simply calls
		100	die.
		101
		102	=item on_read => $cb->($self)
		103
		104	This sets the default read callback, which is called when data arrives
		105	and no read request is in the queue.
		106
		107	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
		108	method or access the C<$self->{rbuf}> member directly.
		109
		110	When an EOF condition is detected then AnyEvent::Handle will first try to
		111	feed all the remaining data to the queued callbacks and C<on_read> before
		112	calling the C<on_eof> callback. If no progress can be made, then a fatal
		113	error will be raised (with C<$!> set to C<EPIPE>).
		114
		115	=item on_drain => $cb->()
		116
		117	This sets the callback that is called when the write buffer becomes empty
		118	(or when the callback is set and the buffer is empty already).
		119
		120	To append to the write buffer, use the C<< ->push_write >> method.
		121
		122	=item rbuf_max => <bytes>
		123
		124	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
		125	when the read buffer ever (strictly) exceeds this size. This is useful to
		126	avoid denial-of-service attacks.
		127
		128	For example, a server accepting connections from untrusted sources should
		129	be configured to accept only so-and-so much data that it cannot act on
		130	(for example, when expecting a line, an attacker could send an unlimited
		131	amount of data without a callback ever being called as long as the line
		132	isn't finished).
		133
		134	=item read_size => <bytes>
		135
		136	The default read block size (the amount of bytes this module will try to read
		137	on each [loop iteration). Default: C<4096>.
		138
		139	=item low_water_mark => <bytes>
		140
		141	Sets the amount of bytes (default: C<0>) that make up an "empty" write
		142	buffer: If the write reaches this size or gets even samller it is
		143	considered empty.
		144
		145	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
		146
		147	When this parameter is given, it enables TLS (SSL) mode, that means it
		148	will start making tls handshake and will transparently encrypt/decrypt
		149	data.
		150
		151	TLS mode requires Net::SSLeay to be installed (it will be loaded
		152	automatically when you try to create a TLS handle).
		153
		154	For the TLS server side, use C<accept>, and for the TLS client side of a
		155	connection, use C<connect> mode.
		156
		157	You can also provide your own TLS connection object, but you have
		158	to make sure that you call either C<Net::SSLeay::set_connect_state>
		159	or C<Net::SSLeay::set_accept_state> on it before you pass it to
		160	AnyEvent::Handle.
		161
		162	See the C<starttls> method if you need to start TLs negotiation later.
		163
		164	=item tls_ctx => $ssl_ctx
		165
		166	Use the given Net::SSLeay::CTX object to create the new TLS connection
		167	(unless a connection object was specified directly). If this parameter is
		168	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
		169
		170	=back
		171
		172	=cut
		173
		174	sub new {
		175	my $class = shift;
		176
		177	my $self = bless { @_ }, $class;
		178
		179	$self->{fh} or Carp::croak "mandatory argument fh is missing";
		180
		181	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
		182
		183	if ($self->{tls}) {
		184	require Net::SSLeay;
		185	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});
		186	}
		187
		188	$self->on_eof (delete $self->{on_eof} ) if $self->{on_eof};
		189	$self->on_error (delete $self->{on_error}) if $self->{on_error};
		190	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
		191	$self->on_read (delete $self->{on_read} ) if $self->{on_read};
		192
		193	$self->start_read;
		194
		195	$self
		196	}
		197
		198	sub _shutdown {
		199	my ($self) = @_;
		200
		201	delete $self->{rw};
		202	delete $self->{ww};
		203	delete $self->{fh};
		204	}
		205
		206	sub error {
		207	my ($self) = @_;
		208
		209	{
		210	local $!;
		211	$self->_shutdown;
		212	}
		213
		214	if ($self->{on_error}) {
		215	$self->{on_error}($self);
		216	} else {
		217	Carp::croak "AnyEvent::Handle uncaught fatal error: $!";
		218	}
		219	}
		220
		221	=item $fh = $handle->fh
		222
		223	This method returns the file handle of the L<AnyEvent::Handle> object.
		224
		225	=cut
		226
		227	sub fh { $_[0]->{fh} }
		228
		229	=item $handle->on_error ($cb)
		230
		231	Replace the current C<on_error> callback (see the C<on_error> constructor argument).
		232
		233	=cut
		234
		235	sub on_error {
		236	$_[0]{on_error} = $_[1];
		237	}
		238
		239	=item $handle->on_eof ($cb)
		240
		241	Replace the current C<on_eof> callback (see the C<on_eof> constructor argument).
		242
		243	=cut
		244
		245	sub on_eof {
		246	$_[0]{on_eof} = $_[1];
		247	}
		248
		249	#############################################################################
		250
		251	=back
		252
		253	=head2 WRITE QUEUE
		254
		255	AnyEvent::Handle manages two queues per handle, one for writing and one
		256	for reading.
		257
		258	The write queue is very simple: you can add data to its end, and
		259	AnyEvent::Handle will automatically try to get rid of it for you.
		260
		261	When data could be written and the write buffer is shorter then the low
		262	water mark, the C<on_drain> callback will be invoked.
		263
		264	=over 4
		265
		266	=item $handle->on_drain ($cb)
		267
		268	Sets the C<on_drain> callback or clears it (see the description of
		269	C<on_drain> in the constructor).
		270
		271	=cut
		272
		273	sub on_drain {
		274	my ($self, $cb) = @_;
		275
		276	$self->{on_drain} = $cb;
		277
		278	$cb->($self)
		279	if $cb && $self->{low_water_mark} >= length $self->{wbuf};
		280	}
		281
		282	=item $handle->push_write ($data)
		283
		284	Queues the given scalar to be written. You can push as much data as you
		285	want (only limited by the available memory), as C<AnyEvent::Handle>
		286	buffers it independently of the kernel.
		287
		288	=cut
		289
		290	sub _drain_wbuf {
		291	my ($self) = @_;
		292
		293	if (!$self->{ww} && length $self->{wbuf}) {
		294	Scalar::Util::weaken $self;
		295	my $cb = sub {
		296	my $len = syswrite $self->{fh}, $self->{wbuf};
		297
		298	if ($len >= 0) {
		299	substr $self->{wbuf}, 0, $len, "";
		300
		301	$self->{on_drain}($self)
		302	if $self->{low_water_mark} >= length $self->{wbuf}
		303	&& $self->{on_drain};
		304
		305	delete $self->{ww} unless length $self->{wbuf};
		306	} elsif ($! != EAGAIN && $! != EINTR) {
		307	$self->error;
		308	}
		309	};
		310
		311	$self->{ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb);
		312
		313	$cb->($self);
		314	};
		315	}
		316
		317	our %WH;
		318
		319	sub register_write_type($$) {
		320	$WH{$_[0]} = $_[1];
		321	}
		322
		323	sub push_write {
		324	my $self = shift;
		325
		326	if (@_ > 1) {
		327	my $type = shift;
		328
		329	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
		330	->($self, @_);
		331	}
		332
		333	if ($self->{filter_w}) {
		334	$self->{filter_w}->($self, \$_[0]);
		335	} else {
		336	$self->{wbuf} .= $_[0];
		337	$self->_drain_wbuf;
		338	}
		339	}
		340
		341	=item $handle->push_write (type => @args)
		342
		343	=item $handle->unshift_write (type => @args)
		344
		345	Instead of formatting your data yourself, you can also let this module do
		346	the job by specifying a type and type-specific arguments.
		347
		348	Predefined types are (if you have ideas for additional types, feel free to
		349	drop by and tell us):
		350
		351	=over 4
		352
		353	=item netstring => $string
		354
		355	Formats the given value as netstring
		356	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).
		357
		358	=back
		359
		360	=cut
		361
		362	register_write_type netstring => sub {
		363	my ($self, $string) = @_;
		364
		365	sprintf "%d:%s,", (length $string), $string
		366	};
		367
		368	=item AnyEvent::Handle::register_write_type type => $coderef->($self, @args)
		369
		370	This function (not method) lets you add your own types to C<push_write>.
		371	Whenever the given C<type> is used, C<push_write> will invoke the code
		372	reference with the handle object and the remaining arguments.
		373
		374	The code reference is supposed to return a single octet string that will
		375	be appended to the write buffer.
		376
		377	Note that this is a function, and all types registered this way will be
		378	global, so try to use unique names.
		379
		380	=cut
		381
		382	#############################################################################
		383
		384	=back
		385
		386	=head2 READ QUEUE
		387
		388	AnyEvent::Handle manages two queues per handle, one for writing and one
		389	for reading.
		390
		391	The read queue is more complex than the write queue. It can be used in two
		392	ways, the "simple" way, using only C<on_read> and the "complex" way, using
		393	a queue.
		394
		395	In the simple case, you just install an C<on_read> callback and whenever
		396	new data arrives, it will be called. You can then remove some data (if
		397	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want
		398	or not.
		399
		400	In the more complex case, you want to queue multiple callbacks. In this
		401	case, AnyEvent::Handle will call the first queued callback each time new
		402	data arrives and removes it when it has done its job (see C<push_read>,
		403	below).
		404
		405	This way you can, for example, push three line-reads, followed by reading
		406	a chunk of data, and AnyEvent::Handle will execute them in order.
		407
		408	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
		409	the specified number of bytes which give an XML datagram.
		410
		411	# in the default state, expect some header bytes
		412	$handle->on_read (sub {
		413	# some data is here, now queue the length-header-read (4 octets)
		414	shift->unshift_read_chunk (4, sub {
		415	# header arrived, decode
		416	my $len = unpack "N", $_[1];
		417
		418	# now read the payload
		419	shift->unshift_read_chunk ($len, sub {
		420	my $xml = $_[1];
		421	# handle xml
		422	});
		423	});
		424	});
		425
		426	Example 2: Implement a client for a protocol that replies either with
		427	"OK" and another line or "ERROR" for one request, and 64 bytes for the
		428	second request. Due tot he availability of a full queue, we can just
		429	pipeline sending both requests and manipulate the queue as necessary in
		430	the callbacks:
		431
		432	# request one
		433	$handle->push_write ("request 1\015\012");
		434
		435	# we expect "ERROR" or "OK" as response, so push a line read
		436	$handle->push_read_line (sub {
		437	# if we got an "OK", we have to _prepend_ another line,
		438	# so it will be read before the second request reads its 64 bytes
		439	# which are already in the queue when this callback is called
		440	# we don't do this in case we got an error
		441	if ($_[1] eq "OK") {
		442	$_[0]->unshift_read_line (sub {
		443	my $response = $_[1];
		444	...
		445	});
36	}	446	}
37	$cv->broadcast;
38	});	447	});
39		448
40	$cv->wait;	449	# request two
		450	$handle->push_write ("request 2\015\012");
41		451
42	=head1 DESCRIPTION	452	# simply read 64 bytes, always
43		453	$handle->push_read_chunk (64, sub {
44	This module is a helper module to make it easier to do non-blocking I/O	454	my $response = $_[1];
45	on filehandles (and sockets, see L<AnyEvent::Socket>).	455	...
46		456	});
47	The event loop is provided by L<AnyEvent>.
48
49	=head1 METHODS
50		457
51	=over 4	458	=over 4
52		459
53	=item B<new (%args)>
54
55	The constructor has these arguments:
56
57	=over 4
58
59	=item fh => $filehandle
60
61	The filehandle this L<AnyEvent::Handle> object will operate on.
62
63	NOTE: The filehandle will be set to non-blocking.
64
65	=item read_block_size => $size
66
67	The default read block size use for reads via the C<on_read>
68	method.
69
70	=back
71
72	=cut	460	=cut
73		461
74	sub new {	462	sub _drain_rbuf {
75	my $this = shift;
76	my $class = ref($this) \|\| $this;
77	my $self = {	463	my ($self) = @_;
78	read_block_size => 4096,	464
79	rbuf => '',	465	if (
80	@_	466	defined $self->{rbuf_max}
		467	&& $self->{rbuf_max} < length $self->{rbuf}
		468	) {
		469	$! = &Errno::ENOSPC; return $self->error;
81	};	470	}
82	bless $self, $class;
83		471
84	$self->{fh}->blocking (0) if $self->{fh};	472	return if $self->{in_drain};
		473	local $self->{in_drain} = 1;
85		474
86	if ($self->{on_read}) {	475	while (my $len = length $self->{rbuf}) {
87	$self->on_read ($self->{on_read});	476	no strict 'refs';
		477	if (my $cb = shift @{ $self->{queue} }) {
		478	unless ($cb->($self)) {
		479	if ($self->{eof}) {
		480	# no progress can be made (not enough data and no data forthcoming)
		481	$! = &Errno::EPIPE; return $self->error;
		482	}
88		483
		484	unshift @{ $self->{queue} }, $cb;
		485	return;
		486	}
89	} elsif ($self->{on_readline}) {	487	} elsif ($self->{on_read}) {
90	$self->readlines ($self->{on_readline});	488	$self->{on_read}($self);
91	}
92		489
93	return $self	490	if (
94	}	491	$self->{eof} # if no further data will arrive
		492	&& $len == length $self->{rbuf} # and no data has been consumed
		493	&& !@{ $self->{queue} } # and the queue is still empty
		494	&& $self->{on_read} # and we still want to read data
		495	) {
		496	# then no progress can be made
		497	$! = &Errno::EPIPE; return $self->error;
		498	}
		499	} else {
		500	# read side becomes idle
		501	delete $self->{rw};
		502	return;
		503	}
		504	}
95		505
96	=item B<fh>	506	if ($self->{eof}) {
		507	$self->_shutdown;
		508	$self->{on_eof}($self)
		509	if $self->{on_eof};
		510	}
		511	}
97		512
98	This method returns the filehandle of the L<AnyEvent::Handle> object.	513	=item $handle->on_read ($cb)
99		514
100	=cut	515	This replaces the currently set C<on_read> callback, or clears it (when
101		516	the new callback is C<undef>). See the description of C<on_read> in the
102	sub fh { $_[0]->{fh} }	517	constructor.
103
104	=item B<on_read ($callback)>
105
106	This method installs a C<$callback> that will be called
107	when new data arrived. You can access the read buffer via the C<rbuf>
108	method (see below).
109
110	The first argument of the C<$callback> will be the L<AnyEvent::Handle> object.
111		518
112	=cut	519	=cut
113		520
114	sub on_read {	521	sub on_read {
115	my ($self, $cb) = @_;	522	my ($self, $cb) = @_;
		523
116	$self->{on_read} = $cb;	524	$self->{on_read} = $cb;
		525	}
117		526
118	unless (defined $self->{on_read}) {	527	=item $handle->rbuf
119	delete $self->{on_read_w};	528
120	return;	529	Returns the read buffer (as a modifiable lvalue).
		530
		531	You can access the read buffer directly as the C<< ->{rbuf} >> member, if
		532	you want.
		533
		534	NOTE: The read buffer should only be used or modified if the C<on_read>,
		535	C<push_read> or C<unshift_read> methods are used. The other read methods
		536	automatically manage the read buffer.
		537
		538	=cut
		539
		540	sub rbuf : lvalue {
		541	$_[0]{rbuf}
		542	}
		543
		544	=item $handle->push_read ($cb)
		545
		546	=item $handle->unshift_read ($cb)
		547
		548	Append the given callback to the end of the queue (C<push_read>) or
		549	prepend it (C<unshift_read>).
		550
		551	The callback is called each time some additional read data arrives.
		552
		553	It must check whether enough data is in the read buffer already.
		554
		555	If not enough data is available, it must return the empty list or a false
		556	value, in which case it will be called repeatedly until enough data is
		557	available (or an error condition is detected).
		558
		559	If enough data was available, then the callback must remove all data it is
		560	interested in (which can be none at all) and return a true value. After returning
		561	true, it will be removed from the queue.
		562
		563	=cut
		564
		565	our %RH;
		566
		567	sub register_read_type($$) {
		568	$RH{$_[0]} = $_[1];
		569	}
		570
		571	sub push_read {
		572	my $self = shift;
		573	my $cb = pop;
		574
		575	if (@_) {
		576	my $type = shift;
		577
		578	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
		579	->($self, $cb, @_);
		580	}
		581
		582	push @{ $self->{queue} }, $cb;
		583	$self->_drain_rbuf;
		584	}
		585
		586	sub unshift_read {
		587	my $self = shift;
		588	my $cb = pop;
		589
		590	if (@_) {
		591	my $type = shift;
		592
		593	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
		594	->($self, $cb, @_);
		595	}
		596
		597
		598	unshift @{ $self->{queue} }, $cb;
		599	$self->_drain_rbuf;
		600	}
		601
		602	=item $handle->push_read (type => @args, $cb)
		603
		604	=item $handle->unshift_read (type => @args, $cb)
		605
		606	Instead of providing a callback that parses the data itself you can chose
		607	between a number of predefined parsing formats, for chunks of data, lines
		608	etc.
		609
		610	Predefined types are (if you have ideas for additional types, feel free to
		611	drop by and tell us):
		612
		613	=over 4
		614
		615	=item chunk => $octets, $cb->($self, $data)
		616
		617	Invoke the callback only once C<$octets> bytes have been read. Pass the
		618	data read to the callback. The callback will never be called with less
		619	data.
		620
		621	Example: read 2 bytes.
		622
		623	$handle->push_read (chunk => 2, sub {
		624	warn "yay ", unpack "H*", $_[1];
121	}	625	});
122		626
123	$self->{on_read_w} =	627	=cut
124	AnyEvent->io (poll => 'r', fh => $self->{fh}, cb => sub {	628
125	#d# warn "READ:[$self->{read_size}] $self->{read_block_size} : ".length ($self->{rbuf})."\n";	629	register_read_type chunk => sub {
126	my $rbuf_len = length $self->{rbuf};	630	my ($self, $cb, $len) = @_;
127	my $l;	631
128	if (defined $self->{read_size}) {	632	sub {
129	$l = sysread $self->{fh}, $self->{rbuf},	633	$len <= length $_[0]{rbuf} or return;
130	($self->{read_size} - $rbuf_len), $rbuf_len;	634	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
131	} else {	635	1
132	$l = sysread $self->{fh}, $self->{rbuf}, $self->{read_block_size}, $rbuf_len;	636	}
		637	};
		638
		639	# compatibility with older API
		640	sub push_read_chunk {
		641	$_[0]->push_read (chunk => $_[1], $_[2]);
		642	}
		643
		644	sub unshift_read_chunk {
		645	$_[0]->unshift_read (chunk => $_[1], $_[2]);
		646	}
		647
		648	=item line => [$eol, ]$cb->($self, $line, $eol)
		649
		650	The callback will be called only once a full line (including the end of
		651	line marker, C<$eol>) has been read. This line (excluding the end of line
		652	marker) will be passed to the callback as second argument (C<$line>), and
		653	the end of line marker as the third argument (C<$eol>).
		654
		655	The end of line marker, C<$eol>, can be either a string, in which case it
		656	will be interpreted as a fixed record end marker, or it can be a regex
		657	object (e.g. created by C<qr>), in which case it is interpreted as a
		658	regular expression.
		659
		660	The end of line marker argument C<$eol> is optional, if it is missing (NOT
		661	undef), then C<qr\|\015?\012\|> is used (which is good for most internet
		662	protocols).
		663
		664	Partial lines at the end of the stream will never be returned, as they are
		665	not marked by the end of line marker.
		666
		667	=cut
		668
		669	register_read_type line => sub {
		670	my ($self, $cb, $eol) = @_;
		671
		672	$eol = qr\|(\015?\012)\| if @_ < 3;
		673	$eol = quotemeta $eol unless ref $eol;
		674	$eol = qr\|^(.*?)($eol)\|s;
		675
		676	sub {
		677	$_[0]{rbuf} =~ s/$eol// or return;
		678
		679	$cb->($_[0], $1, $2);
		680	1
		681	}
		682	};
		683
		684	# compatibility with older API
		685	sub push_read_line {
		686	my $self = shift;
		687	$self->push_read (line => @_);
		688	}
		689
		690	sub unshift_read_line {
		691	my $self = shift;
		692	$self->unshift_read (line => @_);
		693	}
		694
		695	=item netstring => $cb->($string)
		696
		697	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
		698
		699	Throws an error with C<$!> set to EBADMSG on format violations.
		700
		701	=cut
		702
		703	register_read_type netstring => sub {
		704	my ($self, $cb) = @_;
		705
		706	sub {
		707	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
		708	if ($_[0]{rbuf} =~ /[^0-9]/) {
		709	$! = &Errno::EBADMSG;
		710	$self->error;
133	}	711	}
134	#d# warn "READL $l [$self->{rbuf}]\n";	712	return;
		713	}
135		714
136	if (not defined $l) {	715	my $len = $1;
137	return if $! == EAGAIN \|\| $! == EINTR;
138	$self->{on_error}->($self, $!) if $self->{on_error};
139	delete $self->{on_read_w};
140		716
141	} elsif ($l == 0) {	717	$self->unshift_read (chunk => $len, sub {
142	$self->{on_eof}->($self) if $self->{on_eof};	718	my $string = $_[1];
143	delete $self->{on_read_w};	719	$_[0]->unshift_read (chunk => 1, sub {
144		720	if ($_[1] eq ",") {
		721	$cb->($_[0], $string);
145	} else {	722	} else {
146	$self->{on_read}->($self);	723	$! = &Errno::EBADMSG;
		724	$self->error;
		725	}
		726	});
		727	});
		728
		729	1
		730	}
		731	};
		732
		733	=back
		734
		735	=item AnyEvent::Handle::register_read_type type => $coderef->($self, $cb, @args)
		736
		737	This function (not method) lets you add your own types to C<push_read>.
		738
		739	Whenever the given C<type> is used, C<push_read> will invoke the code
		740	reference with the handle object, the callback and the remaining
		741	arguments.
		742
		743	The code reference is supposed to return a callback (usually a closure)
		744	that works as a plain read callback (see C<< ->push_read ($cb) >>).
		745
		746	It should invoke the passed callback when it is done reading (remember to
		747	pass C<$self> as first argument as all other callbacks do that).
		748
		749	Note that this is a function, and all types registered this way will be
		750	global, so try to use unique names.
		751
		752	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,
		753	search for C<register_read_type>)).
		754
		755	=item $handle->stop_read
		756
		757	=item $handle->start_read
		758
		759	In rare cases you actually do not want to read anything from the
		760	socket. In this case you can call C<stop_read>. Neither C<on_read> no
		761	any queued callbacks will be executed then. To start reading again, call
		762	C<start_read>.
		763
		764	=cut
		765
		766	sub stop_read {
		767	my ($self) = @_;
		768
		769	delete $self->{rw};
		770	}
		771
		772	sub start_read {
		773	my ($self) = @_;
		774
		775	unless ($self->{rw} \|\| $self->{eof}) {
		776	Scalar::Util::weaken $self;
		777
		778	$self->{rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
		779	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};
		780	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;
		781
		782	if ($len > 0) {
		783	$self->{filter_r}
		784	? $self->{filter_r}->($self, $rbuf)
		785	: $self->_drain_rbuf;
		786
		787	} elsif (defined $len) {
		788	delete $self->{rw};
		789	$self->{eof} = 1;
		790	$self->_drain_rbuf;
		791
		792	} elsif ($! != EAGAIN && $! != EINTR) {
		793	return $self->error;
147	}	794	}
148	});	795	});
		796	}
149	}	797	}
150		798
151	=item B<on_error ($callback)>	799	sub _dotls {
152
153	Whenever a read or write operation resulted in an error the C<$callback>
154	will be called.
155
156	The first argument of C<$callback> will be the L<AnyEvent::Handle> object itself
157	and the second argument will be the value of C<$!>.
158
159	=cut
160
161	sub on_error {
162	$_[0]->{on_error} = $_[1];
163	}
164
165	=item B<on_eof ($callback)>
166
167	Installs the C<$callback> that will be called when the end of file is
168	encountered in a read operation this C<$callback> will be called. The first
169	argument will be the L<AnyEvent::Handle> object itself.
170
171	=cut
172
173	sub on_eof {
174	$_[0]->{on_eof} = $_[1];
175	}
176
177	=item B<rbuf>
178
179	Returns a reference to the read buffer.
180
181	NOTE: The read buffer should only be used or modified if the C<on_read>
182	method is used directly. The C<read> and C<readlines> methods will provide
183	the read data to their callbacks.
184
185	=cut
186
187	sub rbuf : lvalue { $_[0]->{rbuf} }
188
189	=item B<read ($len, $callback)>
190
191	Will read exactly C<$len> bytes from the filehandle and call the C<$callback>
192	if done so. The first argument to the C<$callback> will be the L<AnyEvent::Handle>
193	object itself and the second argument the read data.
194
195	NOTE: This method will override any callbacks installed via the C<on_read> method.
196
197	=cut
198
199	sub read {
200	my ($self, $len, $cb) = @_;	800	my ($self) = @_;
201		801
202	$self->{read_cb} = $cb;	802	if (length $self->{tls_wbuf}) {
203	my $old_blk_size = $self->{read_block_size};	803	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{tls_wbuf})) > 0) {
204	$self->{read_block_size} = $len;	804	substr $self->{tls_wbuf}, 0, $len, "";
205
206	$self->on_read (sub {
207	#d# warn "OFOFO $len \|\| ".length($_[0]->{rbuf})."\|\|\n";
208
209	if ($len == length $_[0]->{rbuf}) {
210	$_[0]->{read_block_size} = $old_blk_size;
211	$_[0]->on_read (undef);
212	$_[0]->{read_cb}->($_[0], (substr $self->{rbuf}, 0, $len, ''));
213	}	805	}
		806	}
		807
		808	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{tls_wbio}))) {
		809	$self->{wbuf} .= $buf;
		810	$self->_drain_wbuf;
		811	}
		812
		813	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {
		814	$self->{rbuf} .= $buf;
		815	$self->_drain_rbuf;
		816	}
		817
		818	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
		819
		820	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
		821	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
		822	$self->error;
		823	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
		824	$! = &Errno::EIO;
		825	$self->error;
		826	}
		827
		828	# all others are fine for our purposes
		829	}
		830	}
		831
		832	=item $handle->starttls ($tls[, $tls_ctx])
		833
		834	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
		835	object is created, you can also do that at a later time by calling
		836	C<starttls>.
		837
		838	The first argument is the same as the C<tls> constructor argument (either
		839	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
		840
		841	The second argument is the optional C<Net::SSLeay::CTX> object that is
		842	used when AnyEvent::Handle has to create its own TLS connection object.
		843
		844	=cut
		845
		846	# TODO: maybe document...
		847	sub starttls {
		848	my ($self, $ssl, $ctx) = @_;
		849
		850	$self->stoptls;
		851
		852	if ($ssl eq "accept") {
		853	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());
		854	Net::SSLeay::set_accept_state ($ssl);
		855	} elsif ($ssl eq "connect") {
		856	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());
		857	Net::SSLeay::set_connect_state ($ssl);
		858	}
		859
		860	$self->{tls} = $ssl;
		861
		862	# basically, this is deep magic (because SSL_read should have the same issues)
		863	# but the openssl maintainers basically said: "trust us, it just works".
		864	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
		865	# and mismaintained ssleay-module doesn't even offer them).
		866	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		867	Net::SSLeay::CTX_set_mode ($self->{tls},
		868	(eval { Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)
		869	\| (eval { Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));
		870
		871	$self->{tls_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
		872	$self->{tls_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
		873
		874	Net::SSLeay::set_bio ($ssl, $self->{tls_rbio}, $self->{tls_wbio});
		875
		876	$self->{filter_w} = sub {
		877	$_[0]{tls_wbuf} .= ${$_[1]};
		878	&_dotls;
214	});	879	};
215	}	880	$self->{filter_r} = sub {
216		881	Net::SSLeay::BIO_write ($_[0]{tls_rbio}, ${$_[1]});
217	=item B<readlines ($callback)>	882	&_dotls;
218
219	=item B<readlines ($sep, $callback)>
220
221	This method will read lines from the filehandle, seperated by C<$sep> or C<"\n">
222	if C<$sep> is not provided. C<$sep> will be used as part of a regex, so it can be
223	a regex itself and won't be quoted!
224
225	The C<$callback> will be called when at least one
226	line could be read. The first argument to the C<$callback> will be the L<AnyEvent::Handle>
227	object itself and the rest of the arguments will be the read lines.
228
229	NOTE: This method will override any callbacks installed via the C<on_read> method.
230
231	=cut
232
233	sub readlines {
234	my ($self, $NL, $cb) = @_;
235
236	if (ref $NL) {
237	$cb = $NL;
238	$NL = "\n";
239	}
240
241	$self->{on_readline} = $cb;
242
243	$self->on_read (sub {
244	my @lines;
245	push @lines, $1 while $_[0]->{rbuf} =~ s/(.*)$NL//;
246	$self->{on_readline}->($_[0], @lines);
247	});	883	};
248	}	884	}
249		885
250	=item B<write ($data)>	886	=item $handle->stoptls
251		887
252	=item B<write ($callback)>	888	Destroys the SSL connection, if any. Partial read or write data will be
		889	lost.
253		890
254	=item B<write ($data, $callback)>
255
256	This method will write C<$data> to the filehandle and call the C<$callback>
257	afterwards. If only C<$callback> is provided it will be called when the
258	write buffer becomes empty the next time (or immediately if it already is empty).
259
260	=cut	891	=cut
261		892
262	sub write {	893	sub stoptls {
263	my ($self, $data, $cb) = @_;
264	if (ref $data) { $cb = $data; undef $data }
265	push @{$self->{write_bufs}}, [$data, $cb];
266	$self->_check_writer;
267	}
268
269	sub _check_writer {
270	my ($self) = @_;	894	my ($self) = @_;
271		895
272	if ($self->{write_w}) {	896	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};
273	unless ($self->{write_cb}) {	897	delete $self->{tls_rbio};
274	while (@{$self->{write_bufs}} && not defined $self->{write_bufs}->[0]->[1]) {	898	delete $self->{tls_wbio};
275	my $wba = shift @{$self->{write_bufs}};	899	delete $self->{tls_wbuf};
276	$self->{wbuf} .= $wba->[0];	900	delete $self->{filter_r};
277	}
278	}
279	return;
280	}
281
282	my $wba = shift @{$self->{write_bufs}}
283	or return;
284
285	unless (defined $wba->[0]) {
286	$wba->[1]->($self) if $wba->[1];
287	$self->_check_writer;
288	return;
289	}
290
291	$self->{wbuf} = $wba->[0];
292	$self->{write_cb} = $wba->[1];
293
294	$self->{write_w} =
295	AnyEvent->io (poll => 'w', fh => $self->{fh}, cb => sub {
296	my $l = syswrite $self->{fh}, $self->{wbuf}, length $self->{wbuf};
297
298	if (not defined $l) {
299	return if $! == EAGAIN \|\| $! == EINTR;
300	delete $self->{write_w};	901	delete $self->{filter_w};
		902	}
301		903
302	$self->{on_error}->($self, $!) if $self->{on_error};	904	sub DESTROY {
		905	my $self = shift;
303		906
304	} else {	907	$self->stoptls;
305	substr $self->{wbuf}, 0, $l, '';	908	}
306		909
307	if (length ($self->{wbuf}) == 0) {	910	=item AnyEvent::Handle::TLS_CTX
308	$self->{write_cb}->($self) if $self->{write_cb};
309		911
310	delete $self->{write_w};	912	This function creates and returns the Net::SSLeay::CTX object used by
311	delete $self->{wbuf};	913	default for TLS mode.
312	delete $self->{write_cb};
313		914
314	$self->_check_writer;	915	The context is created like this:
315	}	916
316	}	917	Net::SSLeay::load_error_strings;
317	});	918	Net::SSLeay::SSLeay_add_ssl_algorithms;
		919	Net::SSLeay::randomize;
		920
		921	my $CTX = Net::SSLeay::CTX_new;
		922
		923	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
		924
		925	=cut
		926
		927	our $TLS_CTX;
		928
		929	sub TLS_CTX() {
		930	$TLS_CTX \|\| do {
		931	require Net::SSLeay;
		932
		933	Net::SSLeay::load_error_strings ();
		934	Net::SSLeay::SSLeay_add_ssl_algorithms ();
		935	Net::SSLeay::randomize ();
		936
		937	$TLS_CTX = Net::SSLeay::CTX_new ();
		938
		939	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
		940
		941	$TLS_CTX
		942	}
318	}	943	}
319		944
320	=back	945	=back
321		946
322	=head1 AUTHOR	947	=head1 AUTHOR
323		948
324	Robin Redeker, C<< <elmex at ta-sa.org> >>	949	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
325
326	=head1 BUGS
327
328	Please report any bugs or feature requests to
329	C<bug-io-anyevent at rt.cpan.org>, or through the web interface at
330	L<http://rt.cpan.org/NoAuth/ReportBug.html?Queue=IO-AnyEvent>.
331	I will be notified, and then you'll automatically be notified of progress on
332	your bug as I make changes.
333
334	=head1 SUPPORT
335
336	You can find documentation for this module with the perldoc command.
337
338	perldoc AnyEvent::Handle
339
340	You can also look for information at:
341
342	=over 4
343
344	=item * AnnoCPAN: Annotated CPAN documentation
345
346	L<http://annocpan.org/dist/IO-AnyEvent>
347
348	=item * CPAN Ratings
349
350	L<http://cpanratings.perl.org/d/IO-AnyEvent>
351
352	=item * RT: CPAN's request tracker
353
354	L<http://rt.cpan.org/NoAuth/Bugs.html?Dist=IO-AnyEvent>
355
356	=item * Search CPAN
357
358	L<http://search.cpan.org/dist/IO-AnyEvent>
359
360	=back
361
362	=head1 ACKNOWLEDGEMENTS
363
364	=head1 COPYRIGHT & LICENSE
365
366	Copyright 2008 Robin Redeker, all rights reserved.
367
368	This program is free software; you can redistribute it and/or modify it
369	under the same terms as Perl itself.
370		950
371	=cut	951	=cut
372		952
373	1; # End of AnyEvent::Handle	953	1; # End of AnyEvent::Handle

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.1 by elmex, Sun Apr 27 16:56:17 2008 UTC vs. Revision 1.31 by root, Sun May 25 00:08:49 2008 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.1 by elmex, Sun Apr 27 16:56:17 2008 UTC vs.
Revision 1.31 by root, Sun May 25 00:08:49 2008 UTC