ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.31 by root, Sun May 25 00:08:49 2008 UTC vs.
Revision 1.173 by root, Thu Aug 6 13:45:04 2009 UTC

1	package AnyEvent::Handle;	1	package AnyEvent::Handle;
2		2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util ();
8	use Scalar::Util ();	3	use Scalar::Util ();
9	use Carp ();	4	use Carp ();
10	use Fcntl ();
11	use Errno qw/EAGAIN EINTR/;	5	use Errno qw(EAGAIN EINTR);
		6
		7	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		8	use AnyEvent::Util qw(WSAEWOULDBLOCK);
12		9
13	=head1 NAME	10	=head1 NAME
14		11
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	12	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		13
17	=cut	14	=cut
18		15
19	our $VERSION = '0.04';	16	our $VERSION = 4.91;
20		17
21	=head1 SYNOPSIS	18	=head1 SYNOPSIS
22		19
23	use AnyEvent;	20	use AnyEvent;
24	use AnyEvent::Handle;	21	use AnyEvent::Handle;
25		22
26	my $cv = AnyEvent->condvar;	23	my $cv = AnyEvent->condvar;
27		24
28	my $handle =	25	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	26	fh => \*STDIN,
31	on_eof => sub {	27	on_error => sub {
32	$cv->broadcast;	28	my ($hdl, $fatal, $msg) = @_;
33	},	29	warn "got error $msg\n";
		30	$hdl->destroy;
		31	$cv->send;
34	);	32	);
35		33
36	# send some request line	34	# send some request line
37	$handle->push_write ("getinfo\015\012");	35	$hdl->push_write ("getinfo\015\012");
38		36
39	# read the response line	37	# read the response line
40	$handle->push_read (line => sub {	38	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	39	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	40	warn "got line <$line>\n";
43	$cv->send;	41	$cv->send;
44	});	42	});
45		43
46	$cv->recv;	44	$cv->recv;
47		45
48	=head1 DESCRIPTION	46	=head1 DESCRIPTION
49		47
50	This module is a helper module to make it easier to do event-based I/O on	48	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	49	filehandles.
52	on sockets see L<AnyEvent::Util>.	50
		51	The L<AnyEvent::Intro> tutorial contains some well-documented
		52	AnyEvent::Handle examples.
53		53
54	In the following, when the documentation refers to of "bytes" then this	54	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	55	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	56	treatment of characters applies to this module as well.
57		57
		58	At the very minimum, you should specify C<fh> or C<connect>, and the
		59	C<on_error> callback.
		60
58	All callbacks will be invoked with the handle object as their first	61	All callbacks will be invoked with the handle object as their first
59	argument.	62	argument.
60		63
61	=head1 METHODS	64	=head1 METHODS
62		65
63	=over 4	66	=over 4
64		67
65	=item B<new (%args)>	68	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
66		69
67	The constructor supports these arguments (all as key => value pairs).	70	The constructor supports these arguments (all as C<< key => value >> pairs).
68		71
69	=over 4	72	=over 4
70		73
71	=item fh => $filehandle [MANDATORY]	74	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		75
73	The filehandle this L<AnyEvent::Handle> object will operate on.	76	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	77	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	78	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		79	that mode.
77		80
78	=item on_eof => $cb->($self)	81	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
79		82
80	Set the callback to be called on EOF.	83	Try to connect to the specified host and service (port), using
		84	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		85	default C<peername>.
81		86
82	While not mandatory, it is highly recommended to set an eof callback,	87	You have to specify either this parameter, or C<fh>, above.
83	otherwise you might end up with a closed socket while you are still
84	waiting for data.
85		88
		89	It is possible to push requests on the read and write queues, and modify
		90	properties of the stream, even while AnyEvent::Handle is connecting.
		91
		92	When this parameter is specified, then the C<on_prepare>,
		93	C<on_connect_error> and C<on_connect> callbacks will be called under the
		94	appropriate circumstances:
		95
		96	=over 4
		97
86	=item on_error => $cb->($self)	98	=item on_prepare => $cb->($handle)
87		99
		100	This (rarely used) callback is called before a new connection is
		101	attempted, but after the file handle has been created. It could be used to
		102	prepare the file handle with parameters required for the actual connect
		103	(as opposed to settings that can be changed when the connection is already
		104	established).
		105
		106	The return value of this callback should be the connect timeout value in
		107	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
		108	timeout is to be used).
		109
		110	=item on_connect => $cb->($handle, $host, $port, $retry->())
		111
		112	This callback is called when a connection has been successfully established.
		113
		114	The actual numeric host and port (the socket peername) are passed as
		115	parameters, together with a retry callback.
		116
		117	When, for some reason, the handle is not acceptable, then calling
		118	C<$retry> will continue with the next conenction target (in case of
		119	multi-homed hosts or SRV records there can be multiple connection
		120	endpoints). When it is called then the read and write queues, eof status,
		121	tls status and similar properties of the handle are being reset.
		122
		123	In most cases, ignoring the C<$retry> parameter is the way to go.
		124
		125	=item on_connect_error => $cb->($handle, $message)
		126
		127	This callback is called when the conenction could not be
		128	established. C<$!> will contain the relevant error code, and C<$message> a
		129	message describing it (usually the same as C<"$!">).
		130
		131	If this callback isn't specified, then C<on_error> will be called with a
		132	fatal error instead.
		133
		134	=back
		135
		136	=item on_error => $cb->($handle, $fatal, $message)
		137
88	This is the fatal error callback, that is called when, well, a fatal error	138	This is the error callback, which is called when, well, some error
89	occurs, such as not being able to resolve the hostname, failure to connect	139	occured, such as not being able to resolve the hostname, failure to
90	or a read error.	140	connect or a read error.
91		141
92	The object will not be in a usable state when this callback has been	142	Some errors are fatal (which is indicated by C<$fatal> being true). On
93	called.	143	fatal errors the handle object will be destroyed (by a call to C<< ->
		144	destroy >>) after invoking the error callback (which means you are free to
		145	examine the handle object). Examples of fatal errors are an EOF condition
		146	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		147	cases where the other side can close the connection at their will it is
		148	often easiest to not report C<EPIPE> errors in this callback.
		149
		150	AnyEvent::Handle tries to find an appropriate error code for you to check
		151	against, but in some cases (TLS errors), this does not work well. It is
		152	recommended to always output the C<$message> argument in human-readable
		153	error messages (it's usually the same as C<"$!">).
		154
		155	Non-fatal errors can be retried by simply returning, but it is recommended
		156	to simply ignore this parameter and instead abondon the handle object
		157	when this callback is invoked. Examples of non-fatal errors are timeouts
		158	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
94		159
95	On callback entrance, the value of C<$!> contains the operating system	160	On callback entrance, the value of C<$!> contains the operating system
96	error (or C<ENOSPC>, C<EPIPE> or C<EBADMSG>).	161	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		162	C<EPROTO>).
97		163
98	While not mandatory, it is I<highly> recommended to set this callback, as	164	While not mandatory, it is I<highly> recommended to set this callback, as
99	you will not be notified of errors otherwise. The default simply calls	165	you will not be notified of errors otherwise. The default simply calls
100	die.	166	C<croak>.
101		167
102	=item on_read => $cb->($self)	168	=item on_read => $cb->($handle)
103		169
104	This sets the default read callback, which is called when data arrives	170	This sets the default read callback, which is called when data arrives
105	and no read request is in the queue.	171	and no read request is in the queue (unlike read queue callbacks, this
		172	callback will only be called when at least one octet of data is in the
		173	read buffer).
106		174
107	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	175	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
108	method or access the C<$self->{rbuf}> member directly.	176	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		177	must not enlarge or modify the read buffer, you can only remove data at
		178	the beginning from it.
109		179
110	When an EOF condition is detected then AnyEvent::Handle will first try to	180	When an EOF condition is detected then AnyEvent::Handle will first try to
111	feed all the remaining data to the queued callbacks and C<on_read> before	181	feed all the remaining data to the queued callbacks and C<on_read> before
112	calling the C<on_eof> callback. If no progress can be made, then a fatal	182	calling the C<on_eof> callback. If no progress can be made, then a fatal
113	error will be raised (with C<$!> set to C<EPIPE>).	183	error will be raised (with C<$!> set to C<EPIPE>).
114		184
		185	Note that, unlike requests in the read queue, an C<on_read> callback
		186	doesn't mean you I<require> some data: if there is an EOF and there
		187	are outstanding read requests then an error will be flagged. With an
		188	C<on_read> callback, the C<on_eof> callback will be invoked.
		189
		190	=item on_eof => $cb->($handle)
		191
		192	Set the callback to be called when an end-of-file condition is detected,
		193	i.e. in the case of a socket, when the other side has closed the
		194	connection cleanly, and there are no outstanding read requests in the
		195	queue (if there are read requests, then an EOF counts as an unexpected
		196	connection close and will be flagged as an error).
		197
		198	For sockets, this just means that the other side has stopped sending data,
		199	you can still try to write data, and, in fact, one can return from the EOF
		200	callback and continue writing data, as only the read part has been shut
		201	down.
		202
		203	If an EOF condition has been detected but no C<on_eof> callback has been
		204	set, then a fatal error will be raised with C<$!> set to <0>.
		205
115	=item on_drain => $cb->()	206	=item on_drain => $cb->($handle)
116		207
117	This sets the callback that is called when the write buffer becomes empty	208	This sets the callback that is called when the write buffer becomes empty
118	(or when the callback is set and the buffer is empty already).	209	(or when the callback is set and the buffer is empty already).
119		210
120	To append to the write buffer, use the C<< ->push_write >> method.	211	To append to the write buffer, use the C<< ->push_write >> method.
121		212
		213	This callback is useful when you don't want to put all of your write data
		214	into the queue at once, for example, when you want to write the contents
		215	of some file to the socket you might not want to read the whole file into
		216	memory and push it into the queue, but instead only read more data from
		217	the file when the write queue becomes empty.
		218
		219	=item timeout => $fractional_seconds
		220
		221	If non-zero, then this enables an "inactivity" timeout: whenever this many
		222	seconds pass without a successful read or write on the underlying file
		223	handle, the C<on_timeout> callback will be invoked (and if that one is
		224	missing, a non-fatal C<ETIMEDOUT> error will be raised).
		225
		226	Note that timeout processing is also active when you currently do not have
		227	any outstanding read or write requests: If you plan to keep the connection
		228	idle then you should disable the timout temporarily or ignore the timeout
		229	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		230	restart the timeout.
		231
		232	Zero (the default) disables this timeout.
		233
		234	=item on_timeout => $cb->($handle)
		235
		236	Called whenever the inactivity timeout passes. If you return from this
		237	callback, then the timeout will be reset as if some activity had happened,
		238	so this condition is not fatal in any way.
		239
122	=item rbuf_max => <bytes>	240	=item rbuf_max => <bytes>
123		241
124	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	242	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
125	when the read buffer ever (strictly) exceeds this size. This is useful to	243	when the read buffer ever (strictly) exceeds this size. This is useful to
126	avoid denial-of-service attacks.	244	avoid some forms of denial-of-service attacks.
127		245
128	For example, a server accepting connections from untrusted sources should	246	For example, a server accepting connections from untrusted sources should
129	be configured to accept only so-and-so much data that it cannot act on	247	be configured to accept only so-and-so much data that it cannot act on
130	(for example, when expecting a line, an attacker could send an unlimited	248	(for example, when expecting a line, an attacker could send an unlimited
131	amount of data without a callback ever being called as long as the line	249	amount of data without a callback ever being called as long as the line
132	isn't finished).	250	isn't finished).
133		251
		252	=item autocork => <boolean>
		253
		254	When disabled (the default), then C<push_write> will try to immediately
		255	write the data to the handle, if possible. This avoids having to register
		256	a write watcher and wait for the next event loop iteration, but can
		257	be inefficient if you write multiple small chunks (on the wire, this
		258	disadvantage is usually avoided by your kernel's nagle algorithm, see
		259	C<no_delay>, but this option can save costly syscalls).
		260
		261	When enabled, then writes will always be queued till the next event loop
		262	iteration. This is efficient when you do many small writes per iteration,
		263	but less efficient when you do a single write only per iteration (or when
		264	the write buffer often is full). It also increases write latency.
		265
		266	=item no_delay => <boolean>
		267
		268	When doing small writes on sockets, your operating system kernel might
		269	wait a bit for more data before actually sending it out. This is called
		270	the Nagle algorithm, and usually it is beneficial.
		271
		272	In some situations you want as low a delay as possible, which can be
		273	accomplishd by setting this option to a true value.
		274
		275	The default is your opertaing system's default behaviour (most likely
		276	enabled), this option explicitly enables or disables it, if possible.
		277
134	=item read_size => <bytes>	278	=item read_size => <bytes>
135		279
136	The default read block size (the amount of bytes this module will try to read	280	The default read block size (the amount of bytes this module will
137	on each [loop iteration). Default: C<4096>.	281	try to read during each loop iteration, which affects memory
		282	requirements). Default: C<8192>.
138		283
139	=item low_water_mark => <bytes>	284	=item low_water_mark => <bytes>
140		285
141	Sets the amount of bytes (default: C<0>) that make up an "empty" write	286	Sets the amount of bytes (default: C<0>) that make up an "empty" write
142	buffer: If the write reaches this size or gets even samller it is	287	buffer: If the write reaches this size or gets even samller it is
143	considered empty.	288	considered empty.
144		289
		290	Sometimes it can be beneficial (for performance reasons) to add data to
		291	the write buffer before it is fully drained, but this is a rare case, as
		292	the operating system kernel usually buffers data as well, so the default
		293	is good in almost all cases.
		294
		295	=item linger => <seconds>
		296
		297	If non-zero (default: C<3600>), then the destructor of the
		298	AnyEvent::Handle object will check whether there is still outstanding
		299	write data and will install a watcher that will write this data to the
		300	socket. No errors will be reported (this mostly matches how the operating
		301	system treats outstanding data at socket close time).
		302
		303	This will not work for partial TLS data that could not be encoded
		304	yet. This data will be lost. Calling the C<stoptls> method in time might
		305	help.
		306
		307	=item peername => $string
		308
		309	A string used to identify the remote site - usually the DNS hostname
		310	(I<not> IDN!) used to create the connection, rarely the IP address.
		311
		312	Apart from being useful in error messages, this string is also used in TLS
		313	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		314	verification will be skipped when C<peername> is not specified or
		315	C<undef>.
		316
145	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	317	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
146		318
147	When this parameter is given, it enables TLS (SSL) mode, that means it	319	When this parameter is given, it enables TLS (SSL) mode, that means
148	will start making tls handshake and will transparently encrypt/decrypt	320	AnyEvent will start a TLS handshake as soon as the conenction has been
149	data.	321	established and will transparently encrypt/decrypt data afterwards.
		322
		323	All TLS protocol errors will be signalled as C<EPROTO>, with an
		324	appropriate error message.
150		325
151	TLS mode requires Net::SSLeay to be installed (it will be loaded	326	TLS mode requires Net::SSLeay to be installed (it will be loaded
152	automatically when you try to create a TLS handle).	327	automatically when you try to create a TLS handle): this module doesn't
		328	have a dependency on that module, so if your module requires it, you have
		329	to add the dependency yourself.
153		330
154	For the TLS server side, use C<accept>, and for the TLS client side of a	331	Unlike TCP, TLS has a server and client side: for the TLS server side, use
155	connection, use C<connect> mode.	332	C<accept>, and for the TLS client side of a connection, use C<connect>
		333	mode.
156		334
157	You can also provide your own TLS connection object, but you have	335	You can also provide your own TLS connection object, but you have
158	to make sure that you call either C<Net::SSLeay::set_connect_state>	336	to make sure that you call either C<Net::SSLeay::set_connect_state>
159	or C<Net::SSLeay::set_accept_state> on it before you pass it to	337	or C<Net::SSLeay::set_accept_state> on it before you pass it to
160	AnyEvent::Handle.	338	AnyEvent::Handle. Also, this module will take ownership of this connection
		339	object.
161		340
		341	At some future point, AnyEvent::Handle might switch to another TLS
		342	implementation, then the option to use your own session object will go
		343	away.
		344
		345	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		346	passing in the wrong integer will lead to certain crash. This most often
		347	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		348	segmentation fault.
		349
162	See the C<starttls> method if you need to start TLs negotiation later.	350	See the C<< ->starttls >> method for when need to start TLS negotiation later.
163		351
164	=item tls_ctx => $ssl_ctx	352	=item tls_ctx => $anyevent_tls
165		353
166	Use the given Net::SSLeay::CTX object to create the new TLS connection	354	Use the given C<AnyEvent::TLS> object to create the new TLS connection
167	(unless a connection object was specified directly). If this parameter is	355	(unless a connection object was specified directly). If this parameter is
168	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	356	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
169		357
		358	Instead of an object, you can also specify a hash reference with C<< key
		359	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		360	new TLS context object.
		361
		362	=item on_starttls => $cb->($handle, $success[, $error_message])
		363
		364	This callback will be invoked when the TLS/SSL handshake has finished. If
		365	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		366	(C<on_stoptls> will not be called in this case).
		367
		368	The session in C<< $handle->{tls} >> can still be examined in this
		369	callback, even when the handshake was not successful.
		370
		371	TLS handshake failures will not cause C<on_error> to be invoked when this
		372	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		373
		374	Without this callback, handshake failures lead to C<on_error> being
		375	called, as normal.
		376
		377	Note that you cannot call C<starttls> right again in this callback. If you
		378	need to do that, start an zero-second timer instead whose callback can
		379	then call C<< ->starttls >> again.
		380
		381	=item on_stoptls => $cb->($handle)
		382
		383	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		384	set, then it will be invoked after freeing the TLS session. If it is not,
		385	then a TLS shutdown condition will be treated like a normal EOF condition
		386	on the handle.
		387
		388	The session in C<< $handle->{tls} >> can still be examined in this
		389	callback.
		390
		391	This callback will only be called on TLS shutdowns, not when the
		392	underlying handle signals EOF.
		393
		394	=item json => JSON or JSON::XS object
		395
		396	This is the json coder object used by the C<json> read and write types.
		397
		398	If you don't supply it, then AnyEvent::Handle will create and use a
		399	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		400	texts.
		401
		402	Note that you are responsible to depend on the JSON module if you want to
		403	use this functionality, as AnyEvent does not have a dependency itself.
		404
170	=back	405	=back
171		406
172	=cut	407	=cut
173		408
174	sub new {	409	sub new {
175	my $class = shift;	410	my $class = shift;
176
177	my $self = bless { @_ }, $class;	411	my $self = bless { @_ }, $class;
178		412
179	$self->{fh} or Carp::croak "mandatory argument fh is missing";	413	if ($self->{fh}) {
		414	$self->_start;
		415	return unless $self->{fh}; # could be gone by now
		416
		417	} elsif ($self->{connect}) {
		418	require AnyEvent::Socket;
		419
		420	$self->{peername} = $self->{connect}[0]
		421	unless exists $self->{peername};
		422
		423	$self->{_skip_drain_rbuf} = 1;
		424
		425	{
		426	Scalar::Util::weaken (my $self = $self);
		427
		428	$self->{_connect} =
		429	AnyEvent::Socket::tcp_connect (
		430	$self->{connect}[0],
		431	$self->{connect}[1],
		432	sub {
		433	my ($fh, $host, $port, $retry) = @_;
		434
		435	if ($fh) {
		436	$self->{fh} = $fh;
		437
		438	delete $self->{_skip_drain_rbuf};
		439	$self->_start;
		440
		441	$self->{on_connect}
		442	and $self->{on_connect}($self, $host, $port, sub {
		443	delete @$self{qw(fh _tw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		444	$self->{_skip_drain_rbuf} = 1;
		445	&$retry;
		446	});
		447
		448	} else {
		449	if ($self->{on_connect_error}) {
		450	$self->{on_connect_error}($self, "$!");
		451	$self->destroy;
		452	} else {
		453	$self->_error ($!, 1);
		454	}
		455	}
		456	},
		457	sub {
		458	local $self->{fh} = $_[0];
		459
		460	$self->{on_prepare}
		461	? $self->{on_prepare}->($self)
		462	: ()
		463	}
		464	);
		465	}
		466
		467	} else {
		468	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		469	}
		470
		471	$self
		472	}
		473
		474	sub _start {
		475	my ($self) = @_;
180		476
181	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	477	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
182		478
183	if ($self->{tls}) {	479	$self->{_activity} = AnyEvent->now;
184	require Net::SSLeay;	480	$self->_timeout;
		481
		482	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
		483
185	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	484	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
186	}	485	if $self->{tls};
187		486
188	$self->on_eof (delete $self->{on_eof} ) if $self->{on_eof};
189	$self->on_error (delete $self->{on_error}) if $self->{on_error};
190	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	487	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
191	$self->on_read (delete $self->{on_read} ) if $self->{on_read};
192		488
193	$self->start_read;	489	$self->start_read
		490	if $self->{on_read} || @{ $self->{_queue} };
194		491
195	$self	492	$self->_drain_wbuf;
196	}	493	}
197		494
198	sub _shutdown {	495	#sub _shutdown {
199	my ($self) = @_;	496	# my ($self) = @_;
		497	#
		498	# delete @$self{qw(_tw _rw _ww fh wbuf on_read _queue)};
		499	# $self->{_eof} = 1; # tell starttls et. al to stop trying
		500	#
		501	# &_freetls;
		502	#}
200		503
201	delete $self->{rw};
202	delete $self->{ww};
203	delete $self->{fh};
204	}
205
206	sub error {	504	sub _error {
207	my ($self) = @_;	505	my ($self, $errno, $fatal, $message) = @_;
208		506
209	{	507	$! = $errno;
210	local $!;	508	$message ||= "$!";
211	$self->_shutdown;
212	}
213		509
214	if ($self->{on_error}) {	510	if ($self->{on_error}) {
215	$self->{on_error}($self);	511	$self->{on_error}($self, $fatal, $message);
216	} else {	512	$self->destroy if $fatal;
		513	} elsif ($self->{fh}) {
		514	$self->destroy;
217	Carp::croak "AnyEvent::Handle uncaught fatal error: $!";	515	Carp::croak "AnyEvent::Handle uncaught error: $message";
218	}	516	}
219	}	517	}
220		518
221	=item $fh = $handle->fh	519	=item $fh = $handle->fh
222		520
223	This method returns the file handle of the L<AnyEvent::Handle> object.	521	This method returns the file handle used to create the L<AnyEvent::Handle> object.
224		522
225	=cut	523	=cut
226		524
227	sub fh { $_[0]->{fh} }	525	sub fh { $_[0]{fh} }
228		526
229	=item $handle->on_error ($cb)	527	=item $handle->on_error ($cb)
230		528
231	Replace the current C<on_error> callback (see the C<on_error> constructor argument).	529	Replace the current C<on_error> callback (see the C<on_error> constructor argument).
232		530
…		…
244		542
245	sub on_eof {	543	sub on_eof {
246	$_[0]{on_eof} = $_[1];	544	$_[0]{on_eof} = $_[1];
247	}	545	}
248		546
		547	=item $handle->on_timeout ($cb)
		548
		549	Replace the current C<on_timeout> callback, or disables the callback (but
		550	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
		551	argument and method.
		552
		553	=cut
		554
		555	sub on_timeout {
		556	$_[0]{on_timeout} = $_[1];
		557	}
		558
		559	=item $handle->autocork ($boolean)
		560
		561	Enables or disables the current autocork behaviour (see C<autocork>
		562	constructor argument). Changes will only take effect on the next write.
		563
		564	=cut
		565
		566	sub autocork {
		567	$_[0]{autocork} = $_[1];
		568	}
		569
		570	=item $handle->no_delay ($boolean)
		571
		572	Enables or disables the C<no_delay> setting (see constructor argument of
		573	the same name for details).
		574
		575	=cut
		576
		577	sub no_delay {
		578	$_[0]{no_delay} = $_[1];
		579
		580	eval {
		581	local $SIG{__DIE__};
		582	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1]
		583	if $_[0]{fh};
		584	};
		585	}
		586
		587	=item $handle->on_starttls ($cb)
		588
		589	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		590
		591	=cut
		592
		593	sub on_starttls {
		594	$_[0]{on_starttls} = $_[1];
		595	}
		596
		597	=item $handle->on_stoptls ($cb)
		598
		599	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		600
		601	=cut
		602
		603	sub on_starttls {
		604	$_[0]{on_stoptls} = $_[1];
		605	}
		606
		607	=item $handle->rbuf_max ($max_octets)
		608
		609	Configures the C<rbuf_max> setting (C<undef> disables it).
		610
		611	=cut
		612
		613	sub rbuf_max {
		614	$_[0]{rbuf_max} = $_[1];
		615	}
		616
		617	#############################################################################
		618
		619	=item $handle->timeout ($seconds)
		620
		621	Configures (or disables) the inactivity timeout.
		622
		623	=cut
		624
		625	sub timeout {
		626	my ($self, $timeout) = @_;
		627
		628	$self->{timeout} = $timeout;
		629	$self->_timeout;
		630	}
		631
		632	# reset the timeout watcher, as neccessary
		633	# also check for time-outs
		634	sub _timeout {
		635	my ($self) = @_;
		636
		637	if ($self->{timeout} && $self->{fh}) {
		638	my $NOW = AnyEvent->now;
		639
		640	# when would the timeout trigger?
		641	my $after = $self->{_activity} + $self->{timeout} - $NOW;
		642
		643	# now or in the past already?
		644	if ($after <= 0) {
		645	$self->{_activity} = $NOW;
		646
		647	if ($self->{on_timeout}) {
		648	$self->{on_timeout}($self);
		649	} else {
		650	$self->_error (Errno::ETIMEDOUT);
		651	}
		652
		653	# callback could have changed timeout value, optimise
		654	return unless $self->{timeout};
		655
		656	# calculate new after
		657	$after = $self->{timeout};
		658	}
		659
		660	Scalar::Util::weaken $self;
		661	return unless $self; # ->error could have destroyed $self
		662
		663	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
		664	delete $self->{_tw};
		665	$self->_timeout;
		666	});
		667	} else {
		668	delete $self->{_tw};
		669	}
		670	}
		671
249	#############################################################################	672	#############################################################################
250		673
251	=back	674	=back
252		675
253	=head2 WRITE QUEUE	676	=head2 WRITE QUEUE
…		…
274	my ($self, $cb) = @_;	697	my ($self, $cb) = @_;
275		698
276	$self->{on_drain} = $cb;	699	$self->{on_drain} = $cb;
277		700
278	$cb->($self)	701	$cb->($self)
279	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	702	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
280	}	703	}
281		704
282	=item $handle->push_write ($data)	705	=item $handle->push_write ($data)
283		706
284	Queues the given scalar to be written. You can push as much data as you	707	Queues the given scalar to be written. You can push as much data as you
…		…
288	=cut	711	=cut
289		712
290	sub _drain_wbuf {	713	sub _drain_wbuf {
291	my ($self) = @_;	714	my ($self) = @_;
292		715
293	if (!$self->{ww} && length $self->{wbuf}) {	716	if (!$self->{_ww} && length $self->{wbuf}) {
		717
294	Scalar::Util::weaken $self;	718	Scalar::Util::weaken $self;
		719
295	my $cb = sub {	720	my $cb = sub {
296	my $len = syswrite $self->{fh}, $self->{wbuf};	721	my $len = syswrite $self->{fh}, $self->{wbuf};
297		722
298	if ($len >= 0) {	723	if (defined $len) {
299	substr $self->{wbuf}, 0, $len, "";	724	substr $self->{wbuf}, 0, $len, "";
300		725
		726	$self->{_activity} = AnyEvent->now;
		727
301	$self->{on_drain}($self)	728	$self->{on_drain}($self)
302	if $self->{low_water_mark} >= length $self->{wbuf}	729	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
303	&& $self->{on_drain};	730	&& $self->{on_drain};
304		731
305	delete $self->{ww} unless length $self->{wbuf};	732	delete $self->{_ww} unless length $self->{wbuf};
306	} elsif ($! != EAGAIN && $! != EINTR) {	733	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
307	$self->error;	734	$self->_error ($!, 1);
308	}	735	}
309	};	736	};
310		737
		738	# try to write data immediately
		739	$cb->() unless $self->{autocork};
		740
		741	# if still data left in wbuf, we need to poll
311	$self->{ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb);	742	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)
312		743	if length $self->{wbuf};
313	$cb->($self);
314	};	744	};
315	}	745	}
316		746
317	our %WH;	747	our %WH;
318		748
…		…
328		758
329	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	759	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
330	->($self, @_);	760	->($self, @_);
331	}	761	}
332		762
333	if ($self->{filter_w}) {	763	if ($self->{tls}) {
334	$self->{filter_w}->($self, \$_[0]);	764	$self->{_tls_wbuf} .= $_[0];
		765	&_dotls ($self) if $self->{fh};
335	} else {	766	} else {
336	$self->{wbuf} .= $_[0];	767	$self->{wbuf} .= $_[0];
337	$self->_drain_wbuf;	768	$self->_drain_wbuf if $self->{fh};
338	}	769	}
339	}	770	}
340		771
341	=item $handle->push_write (type => @args)	772	=item $handle->push_write (type => @args)
342
343	=item $handle->unshift_write (type => @args)
344		773
345	Instead of formatting your data yourself, you can also let this module do	774	Instead of formatting your data yourself, you can also let this module do
346	the job by specifying a type and type-specific arguments.	775	the job by specifying a type and type-specific arguments.
347		776
348	Predefined types are (if you have ideas for additional types, feel free to	777	Predefined types are (if you have ideas for additional types, feel free to
…		…
353	=item netstring => $string	782	=item netstring => $string
354		783
355	Formats the given value as netstring	784	Formats the given value as netstring
356	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).	785	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).
357		786
358	=back
359
360	=cut	787	=cut
361		788
362	register_write_type netstring => sub {	789	register_write_type netstring => sub {
363	my ($self, $string) = @_;	790	my ($self, $string) = @_;
364		791
365	sprintf "%d:%s,", (length $string), $string	792	(length $string) . ":$string,"
366	};	793	};
367		794
		795	=item packstring => $format, $data
		796
		797	An octet string prefixed with an encoded length. The encoding C<$format>
		798	uses the same format as a Perl C<pack> format, but must specify a single
		799	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		800	optional C<!>, C<< < >> or C<< > >> modifier).
		801
		802	=cut
		803
		804	register_write_type packstring => sub {
		805	my ($self, $format, $string) = @_;
		806
		807	pack "$format/a*", $string
		808	};
		809
		810	=item json => $array_or_hashref
		811
		812	Encodes the given hash or array reference into a JSON object. Unless you
		813	provide your own JSON object, this means it will be encoded to JSON text
		814	in UTF-8.
		815
		816	JSON objects (and arrays) are self-delimiting, so you can write JSON at
		817	one end of a handle and read them at the other end without using any
		818	additional framing.
		819
		820	The generated JSON text is guaranteed not to contain any newlines: While
		821	this module doesn't need delimiters after or between JSON texts to be
		822	able to read them, many other languages depend on that.
		823
		824	A simple RPC protocol that interoperates easily with others is to send
		825	JSON arrays (or objects, although arrays are usually the better choice as
		826	they mimic how function argument passing works) and a newline after each
		827	JSON text:
		828
		829	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
		830	$handle->push_write ("\012");
		831
		832	An AnyEvent::Handle receiver would simply use the C<json> read type and
		833	rely on the fact that the newline will be skipped as leading whitespace:
		834
		835	$handle->push_read (json => sub { my $array = $_[1]; ... });
		836
		837	Other languages could read single lines terminated by a newline and pass
		838	this line into their JSON decoder of choice.
		839
		840	=cut
		841
		842	register_write_type json => sub {
		843	my ($self, $ref) = @_;
		844
		845	require JSON;
		846
		847	$self->{json} ? $self->{json}->encode ($ref)
		848	: JSON::encode_json ($ref)
		849	};
		850
		851	=item storable => $reference
		852
		853	Freezes the given reference using L<Storable> and writes it to the
		854	handle. Uses the C<nfreeze> format.
		855
		856	=cut
		857
		858	register_write_type storable => sub {
		859	my ($self, $ref) = @_;
		860
		861	require Storable;
		862
		863	pack "w/a*", Storable::nfreeze ($ref)
		864	};
		865
		866	=back
		867
		868	=item $handle->push_shutdown
		869
		870	Sometimes you know you want to close the socket after writing your data
		871	before it was actually written. One way to do that is to replace your
		872	C<on_drain> handler by a callback that shuts down the socket (and set
		873	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		874	replaces the C<on_drain> callback with:
		875
		876	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		877
		878	This simply shuts down the write side and signals an EOF condition to the
		879	the peer.
		880
		881	You can rely on the normal read queue and C<on_eof> handling
		882	afterwards. This is the cleanest way to close a connection.
		883
		884	=cut
		885
		886	sub push_shutdown {
		887	my ($self) = @_;
		888
		889	delete $self->{low_water_mark};
		890	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		891	}
		892
368	=item AnyEvent::Handle::register_write_type type => $coderef->($self, @args)	893	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
369		894
370	This function (not method) lets you add your own types to C<push_write>.	895	This function (not method) lets you add your own types to C<push_write>.
371	Whenever the given C<type> is used, C<push_write> will invoke the code	896	Whenever the given C<type> is used, C<push_write> will invoke the code
372	reference with the handle object and the remaining arguments.	897	reference with the handle object and the remaining arguments.
373		898
…		…
392	ways, the "simple" way, using only C<on_read> and the "complex" way, using	917	ways, the "simple" way, using only C<on_read> and the "complex" way, using
393	a queue.	918	a queue.
394		919
395	In the simple case, you just install an C<on_read> callback and whenever	920	In the simple case, you just install an C<on_read> callback and whenever
396	new data arrives, it will be called. You can then remove some data (if	921	new data arrives, it will be called. You can then remove some data (if
397	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	922	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
398	or not.	923	leave the data there if you want to accumulate more (e.g. when only a
		924	partial message has been received so far).
399		925
400	In the more complex case, you want to queue multiple callbacks. In this	926	In the more complex case, you want to queue multiple callbacks. In this
401	case, AnyEvent::Handle will call the first queued callback each time new	927	case, AnyEvent::Handle will call the first queued callback each time new
402	data arrives and removes it when it has done its job (see C<push_read>,	928	data arrives (also the first time it is queued) and removes it when it has
403	below).	929	done its job (see C<push_read>, below).
404		930
405	This way you can, for example, push three line-reads, followed by reading	931	This way you can, for example, push three line-reads, followed by reading
406	a chunk of data, and AnyEvent::Handle will execute them in order.	932	a chunk of data, and AnyEvent::Handle will execute them in order.
407		933
408	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	934	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
409	the specified number of bytes which give an XML datagram.	935	the specified number of bytes which give an XML datagram.
410		936
411	# in the default state, expect some header bytes	937	# in the default state, expect some header bytes
412	$handle->on_read (sub {	938	$handle->on_read (sub {
413	# some data is here, now queue the length-header-read (4 octets)	939	# some data is here, now queue the length-header-read (4 octets)
414	shift->unshift_read_chunk (4, sub {	940	shift->unshift_read (chunk => 4, sub {
415	# header arrived, decode	941	# header arrived, decode
416	my $len = unpack "N", $_[1];	942	my $len = unpack "N", $_[1];
417		943
418	# now read the payload	944	# now read the payload
419	shift->unshift_read_chunk ($len, sub {	945	shift->unshift_read (chunk => $len, sub {
420	my $xml = $_[1];	946	my $xml = $_[1];
421	# handle xml	947	# handle xml
422	});	948	});
423	});	949	});
424	});	950	});
425		951
426	Example 2: Implement a client for a protocol that replies either with	952	Example 2: Implement a client for a protocol that replies either with "OK"
427	"OK" and another line or "ERROR" for one request, and 64 bytes for the	953	and another line or "ERROR" for the first request that is sent, and 64
428	second request. Due tot he availability of a full queue, we can just	954	bytes for the second request. Due to the availability of a queue, we can
429	pipeline sending both requests and manipulate the queue as necessary in	955	just pipeline sending both requests and manipulate the queue as necessary
430	the callbacks:	956	in the callbacks.
431		957
432	# request one	958	When the first callback is called and sees an "OK" response, it will
		959	C<unshift> another line-read. This line-read will be queued I<before> the
		960	64-byte chunk callback.
		961
		962	# request one, returns either "OK + extra line" or "ERROR"
433	$handle->push_write ("request 1\015\012");	963	$handle->push_write ("request 1\015\012");
434		964
435	# we expect "ERROR" or "OK" as response, so push a line read	965	# we expect "ERROR" or "OK" as response, so push a line read
436	$handle->push_read_line (sub {	966	$handle->push_read (line => sub {
437	# if we got an "OK", we have to _prepend_ another line,	967	# if we got an "OK", we have to _prepend_ another line,
438	# so it will be read before the second request reads its 64 bytes	968	# so it will be read before the second request reads its 64 bytes
439	# which are already in the queue when this callback is called	969	# which are already in the queue when this callback is called
440	# we don't do this in case we got an error	970	# we don't do this in case we got an error
441	if ($_[1] eq "OK") {	971	if ($_[1] eq "OK") {
442	$_[0]->unshift_read_line (sub {	972	$_[0]->unshift_read (line => sub {
443	my $response = $_[1];	973	my $response = $_[1];
444	...	974	...
445	});	975	});
446	}	976	}
447	});	977	});
448		978
449	# request two	979	# request two, simply returns 64 octets
450	$handle->push_write ("request 2\015\012");	980	$handle->push_write ("request 2\015\012");
451		981
452	# simply read 64 bytes, always	982	# simply read 64 bytes, always
453	$handle->push_read_chunk (64, sub {	983	$handle->push_read (chunk => 64, sub {
454	my $response = $_[1];	984	my $response = $_[1];
455	...	985	...
456	});	986	});
457		987
458	=over 4	988	=over 4
459		989
460	=cut	990	=cut
461		991
462	sub _drain_rbuf {	992	sub _drain_rbuf {
463	my ($self) = @_;	993	my ($self) = @_;
		994
		995	# avoid recursion
		996	return if $self->{_skip_drain_rbuf};
		997	local $self->{_skip_drain_rbuf} = 1;
		998
		999	while () {
		1000	# we need to use a separate tls read buffer, as we must not receive data while
		1001	# we are draining the buffer, and this can only happen with TLS.
		1002	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1003	if exists $self->{_tls_rbuf};
		1004
		1005	my $len = length $self->{rbuf};
		1006
		1007	if (my $cb = shift @{ $self->{_queue} }) {
		1008	unless ($cb->($self)) {
		1009	# no progress can be made
		1010	# (not enough data and no data forthcoming)
		1011	$self->_error (Errno::EPIPE, 1), return
		1012	if $self->{_eof};
		1013
		1014	unshift @{ $self->{_queue} }, $cb;
		1015	last;
		1016	}
		1017	} elsif ($self->{on_read}) {
		1018	last unless $len;
		1019
		1020	$self->{on_read}($self);
		1021
		1022	if (
		1023	$len == length $self->{rbuf} # if no data has been consumed
		1024	&& !@{ $self->{_queue} } # and the queue is still empty
		1025	&& $self->{on_read} # but we still have on_read
		1026	) {
		1027	# no further data will arrive
		1028	# so no progress can be made
		1029	$self->_error (Errno::EPIPE, 1), return
		1030	if $self->{_eof};
		1031
		1032	last; # more data might arrive
		1033	}
		1034	} else {
		1035	# read side becomes idle
		1036	delete $self->{_rw} unless $self->{tls};
		1037	last;
		1038	}
		1039	}
		1040
		1041	if ($self->{_eof}) {
		1042	$self->{on_eof}
		1043	? $self->{on_eof}($self)
		1044	: $self->_error (0, 1, "Unexpected end-of-file");
		1045
		1046	return;
		1047	}
464		1048
465	if (	1049	if (
466	defined $self->{rbuf_max}	1050	defined $self->{rbuf_max}
467	&& $self->{rbuf_max} < length $self->{rbuf}	1051	&& $self->{rbuf_max} < length $self->{rbuf}
468	) {	1052	) {
469	$! = &Errno::ENOSPC; return $self->error;	1053	$self->_error (Errno::ENOSPC, 1), return;
470	}	1054	}
471		1055
472	return if $self->{in_drain};	1056	# may need to restart read watcher
473	local $self->{in_drain} = 1;	1057	unless ($self->{_rw}) {
474		1058	$self->start_read
475	while (my $len = length $self->{rbuf}) {	1059	if $self->{on_read} || @{ $self->{_queue} };
476	no strict 'refs';
477	if (my $cb = shift @{ $self->{queue} }) {
478	unless ($cb->($self)) {
479	if ($self->{eof}) {
480	# no progress can be made (not enough data and no data forthcoming)
481	$! = &Errno::EPIPE; return $self->error;
482	}
483
484	unshift @{ $self->{queue} }, $cb;
485	return;
486	}
487	} elsif ($self->{on_read}) {
488	$self->{on_read}($self);
489
490	if (
491	$self->{eof} # if no further data will arrive
492	&& $len == length $self->{rbuf} # and no data has been consumed
493	&& !@{ $self->{queue} } # and the queue is still empty
494	&& $self->{on_read} # and we still want to read data
495	) {
496	# then no progress can be made
497	$! = &Errno::EPIPE; return $self->error;
498	}
499	} else {
500	# read side becomes idle
501	delete $self->{rw};
502	return;
503	}
504	}
505
506	if ($self->{eof}) {
507	$self->_shutdown;
508	$self->{on_eof}($self)
509	if $self->{on_eof};
510	}	1060	}
511	}	1061	}
512		1062
513	=item $handle->on_read ($cb)	1063	=item $handle->on_read ($cb)
514		1064
…		…
520		1070
521	sub on_read {	1071	sub on_read {
522	my ($self, $cb) = @_;	1072	my ($self, $cb) = @_;
523		1073
524	$self->{on_read} = $cb;	1074	$self->{on_read} = $cb;
		1075	$self->_drain_rbuf if $cb;
525	}	1076	}
526		1077
527	=item $handle->rbuf	1078	=item $handle->rbuf
528		1079
529	Returns the read buffer (as a modifiable lvalue).	1080	Returns the read buffer (as a modifiable lvalue).
530		1081
531	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1082	You can access the read buffer directly as the C<< ->{rbuf} >>
532	you want.	1083	member, if you want. However, the only operation allowed on the
		1084	read buffer (apart from looking at it) is removing data from its
		1085	beginning. Otherwise modifying or appending to it is not allowed and will
		1086	lead to hard-to-track-down bugs.
533		1087
534	NOTE: The read buffer should only be used or modified if the C<on_read>,	1088	NOTE: The read buffer should only be used or modified if the C<on_read>,
535	C<push_read> or C<unshift_read> methods are used. The other read methods	1089	C<push_read> or C<unshift_read> methods are used. The other read methods
536	automatically manage the read buffer.	1090	automatically manage the read buffer.
537		1091
…		…
577		1131
578	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1132	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
579	->($self, $cb, @_);	1133	->($self, $cb, @_);
580	}	1134	}
581		1135
582	push @{ $self->{queue} }, $cb;	1136	push @{ $self->{_queue} }, $cb;
583	$self->_drain_rbuf;	1137	$self->_drain_rbuf;
584	}	1138	}
585		1139
586	sub unshift_read {	1140	sub unshift_read {
587	my $self = shift;	1141	my $self = shift;
…		…
593	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1147	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
594	->($self, $cb, @_);	1148	->($self, $cb, @_);
595	}	1149	}
596		1150
597		1151
598	unshift @{ $self->{queue} }, $cb;	1152	unshift @{ $self->{_queue} }, $cb;
599	$self->_drain_rbuf;	1153	$self->_drain_rbuf;
600	}	1154	}
601		1155
602	=item $handle->push_read (type => @args, $cb)	1156	=item $handle->push_read (type => @args, $cb)
603		1157
…		…
610	Predefined types are (if you have ideas for additional types, feel free to	1164	Predefined types are (if you have ideas for additional types, feel free to
611	drop by and tell us):	1165	drop by and tell us):
612		1166
613	=over 4	1167	=over 4
614		1168
615	=item chunk => $octets, $cb->($self, $data)	1169	=item chunk => $octets, $cb->($handle, $data)
616		1170
617	Invoke the callback only once C<$octets> bytes have been read. Pass the	1171	Invoke the callback only once C<$octets> bytes have been read. Pass the
618	data read to the callback. The callback will never be called with less	1172	data read to the callback. The callback will never be called with less
619	data.	1173	data.
620		1174
…		…
634	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1188	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
635	1	1189	1
636	}	1190	}
637	};	1191	};
638		1192
639	# compatibility with older API
640	sub push_read_chunk {
641	$_[0]->push_read (chunk => $_[1], $_[2]);
642	}
643
644	sub unshift_read_chunk {
645	$_[0]->unshift_read (chunk => $_[1], $_[2]);
646	}
647
648	=item line => [$eol, ]$cb->($self, $line, $eol)	1193	=item line => [$eol, ]$cb->($handle, $line, $eol)
649		1194
650	The callback will be called only once a full line (including the end of	1195	The callback will be called only once a full line (including the end of
651	line marker, C<$eol>) has been read. This line (excluding the end of line	1196	line marker, C<$eol>) has been read. This line (excluding the end of line
652	marker) will be passed to the callback as second argument (C<$line>), and	1197	marker) will be passed to the callback as second argument (C<$line>), and
653	the end of line marker as the third argument (C<$eol>).	1198	the end of line marker as the third argument (C<$eol>).
…		…
667	=cut	1212	=cut
668		1213
669	register_read_type line => sub {	1214	register_read_type line => sub {
670	my ($self, $cb, $eol) = @_;	1215	my ($self, $cb, $eol) = @_;
671		1216
672	$eol = qr|(\015?\012)| if @_ < 3;	1217	if (@_ < 3) {
		1218	# this is more than twice as fast as the generic code below
		1219	sub {
		1220	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
		1221
		1222	$cb->($_[0], $1, $2);
		1223	1
		1224	}
		1225	} else {
673	$eol = quotemeta $eol unless ref $eol;	1226	$eol = quotemeta $eol unless ref $eol;
674	$eol = qr|^(.*?)($eol)|s;	1227	$eol = qr|^(.*?)($eol)|s;
		1228
		1229	sub {
		1230	$_[0]{rbuf} =~ s/$eol// or return;
		1231
		1232	$cb->($_[0], $1, $2);
		1233	1
		1234	}
		1235	}
		1236	};
		1237
		1238	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
		1239
		1240	Makes a regex match against the regex object C<$accept> and returns
		1241	everything up to and including the match.
		1242
		1243	Example: read a single line terminated by '\n'.
		1244
		1245	$handle->push_read (regex => qr<\n>, sub { ... });
		1246
		1247	If C<$reject> is given and not undef, then it determines when the data is
		1248	to be rejected: it is matched against the data when the C<$accept> regex
		1249	does not match and generates an C<EBADMSG> error when it matches. This is
		1250	useful to quickly reject wrong data (to avoid waiting for a timeout or a
		1251	receive buffer overflow).
		1252
		1253	Example: expect a single decimal number followed by whitespace, reject
		1254	anything else (not the use of an anchor).
		1255
		1256	$handle->push_read (regex => qr<^[0-9]+\s>, qr<[^0-9]>, sub { ... });
		1257
		1258	If C<$skip> is given and not C<undef>, then it will be matched against
		1259	the receive buffer when neither C<$accept> nor C<$reject> match,
		1260	and everything preceding and including the match will be accepted
		1261	unconditionally. This is useful to skip large amounts of data that you
		1262	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
		1263	have to start matching from the beginning. This is purely an optimisation
		1264	and is usually worth only when you expect more than a few kilobytes.
		1265
		1266	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
		1267	expect the header to be very large (it isn't in practise, but...), we use
		1268	a skip regex to skip initial portions. The skip regex is tricky in that
		1269	it only accepts something not ending in either \015 or \012, as these are
		1270	required for the accept regex.
		1271
		1272	$handle->push_read (regex =>
		1273	qr<\015\012\015\012>,
		1274	undef, # no reject
		1275	qr<^.*[^\015\012]>,
		1276	sub { ... });
		1277
		1278	=cut
		1279
		1280	register_read_type regex => sub {
		1281	my ($self, $cb, $accept, $reject, $skip) = @_;
		1282
		1283	my $data;
		1284	my $rbuf = \$self->{rbuf};
675		1285
676	sub {	1286	sub {
677	$_[0]{rbuf} =~ s/$eol// or return;	1287	# accept
678		1288	if ($$rbuf =~ $accept) {
679	$cb->($_[0], $1, $2);	1289	$data .= substr $$rbuf, 0, $+[0], "";
		1290	$cb->($self, $data);
		1291	return 1;
		1292	}
680	1	1293
		1294	# reject
		1295	if ($reject && $$rbuf =~ $reject) {
		1296	$self->_error (Errno::EBADMSG);
		1297	}
		1298
		1299	# skip
		1300	if ($skip && $$rbuf =~ $skip) {
		1301	$data .= substr $$rbuf, 0, $+[0], "";
		1302	}
		1303
		1304	()
681	}	1305	}
682	};	1306	};
683		1307
684	# compatibility with older API
685	sub push_read_line {
686	my $self = shift;
687	$self->push_read (line => @_);
688	}
689
690	sub unshift_read_line {
691	my $self = shift;
692	$self->unshift_read (line => @_);
693	}
694
695	=item netstring => $cb->($string)	1308	=item netstring => $cb->($handle, $string)
696		1309
697	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).	1310	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
698		1311
699	Throws an error with C<$!> set to EBADMSG on format violations.	1312	Throws an error with C<$!> set to EBADMSG on format violations.
700		1313
…		…
704	my ($self, $cb) = @_;	1317	my ($self, $cb) = @_;
705		1318
706	sub {	1319	sub {
707	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1320	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
708	if ($_[0]{rbuf} =~ /[^0-9]/) {	1321	if ($_[0]{rbuf} =~ /[^0-9]/) {
709	$! = &Errno::EBADMSG;	1322	$self->_error (Errno::EBADMSG);
710	$self->error;
711	}	1323	}
712	return;	1324	return;
713	}	1325	}
714		1326
715	my $len = $1;	1327	my $len = $1;
…		…
718	my $string = $_[1];	1330	my $string = $_[1];
719	$_[0]->unshift_read (chunk => 1, sub {	1331	$_[0]->unshift_read (chunk => 1, sub {
720	if ($_[1] eq ",") {	1332	if ($_[1] eq ",") {
721	$cb->($_[0], $string);	1333	$cb->($_[0], $string);
722	} else {	1334	} else {
723	$! = &Errno::EBADMSG;
724	$self->error;	1335	$self->_error (Errno::EBADMSG);
725	}	1336	}
726	});	1337	});
727	});	1338	});
728		1339
729	1	1340	1
730	}	1341	}
731	};	1342	};
732		1343
		1344	=item packstring => $format, $cb->($handle, $string)
		1345
		1346	An octet string prefixed with an encoded length. The encoding C<$format>
		1347	uses the same format as a Perl C<pack> format, but must specify a single
		1348	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1349	optional C<!>, C<< < >> or C<< > >> modifier).
		1350
		1351	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1352	EPP uses a prefix of C<N> (4 octtes).
		1353
		1354	Example: read a block of data prefixed by its length in BER-encoded
		1355	format (very efficient).
		1356
		1357	$handle->push_read (packstring => "w", sub {
		1358	my ($handle, $data) = @_;
		1359	});
		1360
		1361	=cut
		1362
		1363	register_read_type packstring => sub {
		1364	my ($self, $cb, $format) = @_;
		1365
		1366	sub {
		1367	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1368	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
		1369	or return;
		1370
		1371	$format = length pack $format, $len;
		1372
		1373	# bypass unshift if we already have the remaining chunk
		1374	if ($format + $len <= length $_[0]{rbuf}) {
		1375	my $data = substr $_[0]{rbuf}, $format, $len;
		1376	substr $_[0]{rbuf}, 0, $format + $len, "";
		1377	$cb->($_[0], $data);
		1378	} else {
		1379	# remove prefix
		1380	substr $_[0]{rbuf}, 0, $format, "";
		1381
		1382	# read remaining chunk
		1383	$_[0]->unshift_read (chunk => $len, $cb);
		1384	}
		1385
		1386	1
		1387	}
		1388	};
		1389
		1390	=item json => $cb->($handle, $hash_or_arrayref)
		1391
		1392	Reads a JSON object or array, decodes it and passes it to the
		1393	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
		1394
		1395	If a C<json> object was passed to the constructor, then that will be used
		1396	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
		1397
		1398	This read type uses the incremental parser available with JSON version
		1399	2.09 (and JSON::XS version 2.2) and above. You have to provide a
		1400	dependency on your own: this module will load the JSON module, but
		1401	AnyEvent does not depend on it itself.
		1402
		1403	Since JSON texts are fully self-delimiting, the C<json> read and write
		1404	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
		1405	the C<json> write type description, above, for an actual example.
		1406
		1407	=cut
		1408
		1409	register_read_type json => sub {
		1410	my ($self, $cb) = @_;
		1411
		1412	my $json = $self->{json} ||=
		1413	eval { require JSON::XS; JSON::XS->new->utf8 }
		1414	|| do { require JSON; JSON->new->utf8 };
		1415
		1416	my $data;
		1417	my $rbuf = \$self->{rbuf};
		1418
		1419	sub {
		1420	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
		1421
		1422	if ($ref) {
		1423	$self->{rbuf} = $json->incr_text;
		1424	$json->incr_text = "";
		1425	$cb->($self, $ref);
		1426
		1427	1
		1428	} elsif ($@) {
		1429	# error case
		1430	$json->incr_skip;
		1431
		1432	$self->{rbuf} = $json->incr_text;
		1433	$json->incr_text = "";
		1434
		1435	$self->_error (Errno::EBADMSG);
		1436
		1437	()
		1438	} else {
		1439	$self->{rbuf} = "";
		1440
		1441	()
		1442	}
		1443	}
		1444	};
		1445
		1446	=item storable => $cb->($handle, $ref)
		1447
		1448	Deserialises a L<Storable> frozen representation as written by the
		1449	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1450	data).
		1451
		1452	Raises C<EBADMSG> error if the data could not be decoded.
		1453
		1454	=cut
		1455
		1456	register_read_type storable => sub {
		1457	my ($self, $cb) = @_;
		1458
		1459	require Storable;
		1460
		1461	sub {
		1462	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1463	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
		1464	or return;
		1465
		1466	my $format = length pack "w", $len;
		1467
		1468	# bypass unshift if we already have the remaining chunk
		1469	if ($format + $len <= length $_[0]{rbuf}) {
		1470	my $data = substr $_[0]{rbuf}, $format, $len;
		1471	substr $_[0]{rbuf}, 0, $format + $len, "";
		1472	$cb->($_[0], Storable::thaw ($data));
		1473	} else {
		1474	# remove prefix
		1475	substr $_[0]{rbuf}, 0, $format, "";
		1476
		1477	# read remaining chunk
		1478	$_[0]->unshift_read (chunk => $len, sub {
		1479	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1480	$cb->($_[0], $ref);
		1481	} else {
		1482	$self->_error (Errno::EBADMSG);
		1483	}
		1484	});
		1485	}
		1486
		1487	1
		1488	}
		1489	};
		1490
733	=back	1491	=back
734		1492
735	=item AnyEvent::Handle::register_read_type type => $coderef->($self, $cb, @args)	1493	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)
736		1494
737	This function (not method) lets you add your own types to C<push_read>.	1495	This function (not method) lets you add your own types to C<push_read>.
738		1496
739	Whenever the given C<type> is used, C<push_read> will invoke the code	1497	Whenever the given C<type> is used, C<push_read> will invoke the code
740	reference with the handle object, the callback and the remaining	1498	reference with the handle object, the callback and the remaining
…		…
742		1500
743	The code reference is supposed to return a callback (usually a closure)	1501	The code reference is supposed to return a callback (usually a closure)
744	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1502	that works as a plain read callback (see C<< ->push_read ($cb) >>).
745		1503
746	It should invoke the passed callback when it is done reading (remember to	1504	It should invoke the passed callback when it is done reading (remember to
747	pass C<$self> as first argument as all other callbacks do that).	1505	pass C<$handle> as first argument as all other callbacks do that).
748		1506
749	Note that this is a function, and all types registered this way will be	1507	Note that this is a function, and all types registered this way will be
750	global, so try to use unique names.	1508	global, so try to use unique names.
751		1509
752	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1510	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,
…		…
755	=item $handle->stop_read	1513	=item $handle->stop_read
756		1514
757	=item $handle->start_read	1515	=item $handle->start_read
758		1516
759	In rare cases you actually do not want to read anything from the	1517	In rare cases you actually do not want to read anything from the
760	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1518	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
761	any queued callbacks will be executed then. To start reading again, call	1519	any queued callbacks will be executed then. To start reading again, call
762	C<start_read>.	1520	C<start_read>.
763		1521
		1522	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1523	you change the C<on_read> callback or push/unshift a read callback, and it
		1524	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1525	there are any read requests in the queue.
		1526
		1527	These methods will have no effect when in TLS mode (as TLS doesn't support
		1528	half-duplex connections).
		1529
764	=cut	1530	=cut
765		1531
766	sub stop_read {	1532	sub stop_read {
767	my ($self) = @_;	1533	my ($self) = @_;
768		1534
769	delete $self->{rw};	1535	delete $self->{_rw} unless $self->{tls};
770	}	1536	}
771		1537
772	sub start_read {	1538	sub start_read {
773	my ($self) = @_;	1539	my ($self) = @_;
774		1540
775	unless ($self->{rw} || $self->{eof}) {	1541	unless ($self->{_rw} || $self->{_eof}) {
776	Scalar::Util::weaken $self;	1542	Scalar::Util::weaken $self;
777		1543
778	$self->{rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1544	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
779	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1545	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
780	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1546	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
781		1547
782	if ($len > 0) {	1548	if ($len > 0) {
783	$self->{filter_r}	1549	$self->{_activity} = AnyEvent->now;
784	? $self->{filter_r}->($self, $rbuf)	1550
		1551	if ($self->{tls}) {
		1552	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
		1553
		1554	&_dotls ($self);
		1555	} else {
785	: $self->_drain_rbuf;	1556	$self->_drain_rbuf;
		1557	}
786		1558
787	} elsif (defined $len) {	1559	} elsif (defined $len) {
788	delete $self->{rw};	1560	delete $self->{_rw};
789	$self->{eof} = 1;	1561	$self->{_eof} = 1;
790	$self->_drain_rbuf;	1562	$self->_drain_rbuf;
791		1563
792	} elsif ($! != EAGAIN && $! != EINTR) {	1564	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
793	return $self->error;	1565	return $self->_error ($!, 1);
794	}	1566	}
795	});	1567	});
796	}	1568	}
797	}	1569	}
798		1570
		1571	our $ERROR_SYSCALL;
		1572	our $ERROR_WANT_READ;
		1573
		1574	sub _tls_error {
		1575	my ($self, $err) = @_;
		1576
		1577	return $self->_error ($!, 1)
		1578	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1579
		1580	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1581
		1582	# reduce error string to look less scary
		1583	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1584
		1585	if ($self->{_on_starttls}) {
		1586	(delete $self->{_on_starttls})->($self, undef, $err);
		1587	&_freetls;
		1588	} else {
		1589	&_freetls;
		1590	$self->_error (Errno::EPROTO, 1, $err);
		1591	}
		1592	}
		1593
		1594	# poll the write BIO and send the data if applicable
		1595	# also decode read data if possible
		1596	# this is basiclaly our TLS state machine
		1597	# more efficient implementations are possible with openssl,
		1598	# but not with the buggy and incomplete Net::SSLeay.
799	sub _dotls {	1599	sub _dotls {
800	my ($self) = @_;	1600	my ($self) = @_;
801		1601
		1602	my $tmp;
		1603
802	if (length $self->{tls_wbuf}) {	1604	if (length $self->{_tls_wbuf}) {
803	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{tls_wbuf})) > 0) {	1605	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
804	substr $self->{tls_wbuf}, 0, $len, "";	1606	substr $self->{_tls_wbuf}, 0, $tmp, "";
805	}	1607	}
806	}
807		1608
		1609	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1610	return $self->_tls_error ($tmp)
		1611	if $tmp != $ERROR_WANT_READ
		1612	&& ($tmp != $ERROR_SYSCALL || $!);
		1613	}
		1614
808	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{tls_wbio}))) {	1615	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1616	unless (length $tmp) {
		1617	$self->{_on_starttls}
		1618	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1619	&_freetls;
		1620
		1621	if ($self->{on_stoptls}) {
		1622	$self->{on_stoptls}($self);
		1623	return;
		1624	} else {
		1625	# let's treat SSL-eof as we treat normal EOF
		1626	delete $self->{_rw};
		1627	$self->{_eof} = 1;
		1628	}
		1629	}
		1630
		1631	$self->{_tls_rbuf} .= $tmp;
		1632	$self->_drain_rbuf;
		1633	$self->{tls} or return; # tls session might have gone away in callback
		1634	}
		1635
		1636	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1637	return $self->_tls_error ($tmp)
		1638	if $tmp != $ERROR_WANT_READ
		1639	&& ($tmp != $ERROR_SYSCALL || $!);
		1640
		1641	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
809	$self->{wbuf} .= $buf;	1642	$self->{wbuf} .= $tmp;
810	$self->_drain_wbuf;	1643	$self->_drain_wbuf;
811	}	1644	}
812		1645
813	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {	1646	$self->{_on_starttls}
814	$self->{rbuf} .= $buf;	1647	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
815	$self->_drain_rbuf;	1648	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
816	}
817
818	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
819
820	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
821	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
822	$self->error;
823	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
824	$! = &Errno::EIO;
825	$self->error;
826	}
827
828	# all others are fine for our purposes
829	}
830	}	1649	}
831		1650
832	=item $handle->starttls ($tls[, $tls_ctx])	1651	=item $handle->starttls ($tls[, $tls_ctx])
833		1652
834	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1653	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
835	object is created, you can also do that at a later time by calling	1654	object is created, you can also do that at a later time by calling
836	C<starttls>.	1655	C<starttls>.
837		1656
		1657	Starting TLS is currently an asynchronous operation - when you push some
		1658	write data and then call C<< ->starttls >> then TLS negotiation will start
		1659	immediately, after which the queued write data is then sent.
		1660
838	The first argument is the same as the C<tls> constructor argument (either	1661	The first argument is the same as the C<tls> constructor argument (either
839	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1662	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
840		1663
841	The second argument is the optional C<Net::SSLeay::CTX> object that is	1664	The second argument is the optional C<AnyEvent::TLS> object that is used
842	used when AnyEvent::Handle has to create its own TLS connection object.	1665	when AnyEvent::Handle has to create its own TLS connection object, or
		1666	a hash reference with C<< key => value >> pairs that will be used to
		1667	construct a new context.
843		1668
844	=cut	1669	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
		1670	context in C<< $handle->{tls_ctx} >> after this call and can be used or
		1671	changed to your liking. Note that the handshake might have already started
		1672	when this function returns.
845		1673
846	# TODO: maybe document...	1674	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1675	handshakes on the same stream. Best do not attempt to use the stream after
		1676	stopping TLS.
		1677
		1678	=cut
		1679
		1680	our %TLS_CACHE; #TODO not yet documented, should we?
		1681
847	sub starttls {	1682	sub starttls {
848	my ($self, $ssl, $ctx) = @_;	1683	my ($self, $tls, $ctx) = @_;
849		1684
850	$self->stoptls;	1685	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1686	if $self->{tls};
851		1687
852	if ($ssl eq "accept") {	1688	$self->{tls} = $tls;
853	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1689	$self->{tls_ctx} = $ctx if @_ > 2;
854	Net::SSLeay::set_accept_state ($ssl);	1690
855	} elsif ($ssl eq "connect") {	1691	return unless $self->{fh};
856	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1692
857	Net::SSLeay::set_connect_state ($ssl);	1693	require Net::SSLeay;
		1694
		1695	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1696	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1697
		1698	$tls = $self->{tls};
		1699	$ctx = $self->{tls_ctx};
		1700
		1701	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1702
		1703	if ("HASH" eq ref $ctx) {
		1704	require AnyEvent::TLS;
		1705
		1706	if ($ctx->{cache}) {
		1707	my $key = $ctx+0;
		1708	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1709	} else {
		1710	$ctx = new AnyEvent::TLS %$ctx;
		1711	}
		1712	}
858	}	1713
859		1714	$self->{tls_ctx} = $ctx || TLS_CTX ();
860	$self->{tls} = $ssl;	1715	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
861		1716
862	# basically, this is deep magic (because SSL_read should have the same issues)	1717	# basically, this is deep magic (because SSL_read should have the same issues)
863	# but the openssl maintainers basically said: "trust us, it just works".	1718	# but the openssl maintainers basically said: "trust us, it just works".
864	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1719	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
865	# and mismaintained ssleay-module doesn't even offer them).	1720	# and mismaintained ssleay-module doesn't even offer them).
866	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1721	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1722	#
		1723	# in short: this is a mess.
		1724	#
		1725	# note that we do not try to keep the length constant between writes as we are required to do.
		1726	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1727	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1728	# have identity issues in that area.
867	Net::SSLeay::CTX_set_mode ($self->{tls},	1729	# Net::SSLeay::CTX_set_mode ($ssl,
868	(eval { Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1730	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
869	| (eval { Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1731	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1732	Net::SSLeay::CTX_set_mode ($tls, 1|2);
870		1733
871	$self->{tls_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1734	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
872	$self->{tls_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1735	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
873		1736
		1737	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1738
874	Net::SSLeay::set_bio ($ssl, $self->{tls_rbio}, $self->{tls_wbio});	1739	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
875		1740
876	$self->{filter_w} = sub {	1741	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
877	$_[0]{tls_wbuf} .= ${$_[1]};	1742	if $self->{on_starttls};
878	&_dotls;	1743
879	};	1744	&_dotls; # need to trigger the initial handshake
880	$self->{filter_r} = sub {	1745	$self->start_read; # make sure we actually do read
881	Net::SSLeay::BIO_write ($_[0]{tls_rbio}, ${$_[1]});
882	&_dotls;
883	};
884	}	1746	}
885		1747
886	=item $handle->stoptls	1748	=item $handle->stoptls
887		1749
888	Destroys the SSL connection, if any. Partial read or write data will be	1750	Shuts down the SSL connection - this makes a proper EOF handshake by
889	lost.	1751	sending a close notify to the other side, but since OpenSSL doesn't
		1752	support non-blocking shut downs, it is not guarenteed that you can re-use
		1753	the stream afterwards.
890		1754
891	=cut	1755	=cut
892		1756
893	sub stoptls {	1757	sub stoptls {
894	my ($self) = @_;	1758	my ($self) = @_;
895		1759
896	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1760	if ($self->{tls}) {
897	delete $self->{tls_rbio};	1761	Net::SSLeay::shutdown ($self->{tls});
898	delete $self->{tls_wbio};	1762
899	delete $self->{tls_wbuf};	1763	&_dotls;
900	delete $self->{filter_r};	1764
901	delete $self->{filter_w};	1765	# # we don't give a shit. no, we do, but we can't. no...#d#
		1766	# # we, we... have to use openssl :/#d#
		1767	# &_freetls;#d#
		1768	}
		1769	}
		1770
		1771	sub _freetls {
		1772	my ($self) = @_;
		1773
		1774	return unless $self->{tls};
		1775
		1776	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1777	if $self->{tls} > 0;
		1778
		1779	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
902	}	1780	}
903		1781
904	sub DESTROY {	1782	sub DESTROY {
905	my $self = shift;	1783	my ($self) = @_;
906		1784
907	$self->stoptls;	1785	&_freetls;
		1786
		1787	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1788
		1789	if ($linger && length $self->{wbuf} && $self->{fh}) {
		1790	my $fh = delete $self->{fh};
		1791	my $wbuf = delete $self->{wbuf};
		1792
		1793	my @linger;
		1794
		1795	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {
		1796	my $len = syswrite $fh, $wbuf, length $wbuf;
		1797
		1798	if ($len > 0) {
		1799	substr $wbuf, 0, $len, "";
		1800	} else {
		1801	@linger = (); # end
		1802	}
		1803	});
		1804	push @linger, AnyEvent->timer (after => $linger, cb => sub {
		1805	@linger = ();
		1806	});
		1807	}
		1808	}
		1809
		1810	=item $handle->destroy
		1811
		1812	Shuts down the handle object as much as possible - this call ensures that
		1813	no further callbacks will be invoked and as many resources as possible
		1814	will be freed. Any method you will call on the handle object after
		1815	destroying it in this way will be silently ignored (and it will return the
		1816	empty list).
		1817
		1818	Normally, you can just "forget" any references to an AnyEvent::Handle
		1819	object and it will simply shut down. This works in fatal error and EOF
		1820	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1821	callback, so when you want to destroy the AnyEvent::Handle object from
		1822	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1823	that case.
		1824
		1825	Destroying the handle object in this way has the advantage that callbacks
		1826	will be removed as well, so if those are the only reference holders (as
		1827	is common), then one doesn't need to do anything special to break any
		1828	reference cycles.
		1829
		1830	The handle might still linger in the background and write out remaining
		1831	data, as specified by the C<linger> option, however.
		1832
		1833	=cut
		1834
		1835	sub destroy {
		1836	my ($self) = @_;
		1837
		1838	$self->DESTROY;
		1839	%$self = ();
		1840	bless $self, "AnyEvent::Handle::destroyed";
		1841	}
		1842
		1843	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		1844	#nop
908	}	1845	}
909		1846
910	=item AnyEvent::Handle::TLS_CTX	1847	=item AnyEvent::Handle::TLS_CTX
911		1848
912	This function creates and returns the Net::SSLeay::CTX object used by	1849	This function creates and returns the AnyEvent::TLS object used by default
913	default for TLS mode.	1850	for TLS mode.
914		1851
915	The context is created like this:	1852	The context is created by calling L<AnyEvent::TLS> without any arguments.
916
917	Net::SSLeay::load_error_strings;
918	Net::SSLeay::SSLeay_add_ssl_algorithms;
919	Net::SSLeay::randomize;
920
921	my $CTX = Net::SSLeay::CTX_new;
922
923	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
924		1853
925	=cut	1854	=cut
926		1855
927	our $TLS_CTX;	1856	our $TLS_CTX;
928		1857
929	sub TLS_CTX() {	1858	sub TLS_CTX() {
930	$TLS_CTX || do {	1859	$TLS_CTX ||= do {
931	require Net::SSLeay;	1860	require AnyEvent::TLS;
932		1861
933	Net::SSLeay::load_error_strings ();	1862	new AnyEvent::TLS
934	Net::SSLeay::SSLeay_add_ssl_algorithms ();
935	Net::SSLeay::randomize ();
936
937	$TLS_CTX = Net::SSLeay::CTX_new ();
938
939	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
940
941	$TLS_CTX
942	}	1863	}
943	}	1864	}
944		1865
945	=back	1866	=back
946		1867
		1868
		1869	=head1 NONFREQUENTLY ASKED QUESTIONS
		1870
		1871	=over 4
		1872
		1873	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1874	still get further invocations!
		1875
		1876	That's because AnyEvent::Handle keeps a reference to itself when handling
		1877	read or write callbacks.
		1878
		1879	It is only safe to "forget" the reference inside EOF or error callbacks,
		1880	from within all other callbacks, you need to explicitly call the C<<
		1881	->destroy >> method.
		1882
		1883	=item I get different callback invocations in TLS mode/Why can't I pause
		1884	reading?
		1885
		1886	Unlike, say, TCP, TLS connections do not consist of two independent
		1887	communication channels, one for each direction. Or put differently. The
		1888	read and write directions are not independent of each other: you cannot
		1889	write data unless you are also prepared to read, and vice versa.
		1890
		1891	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		1892	callback invocations when you are not expecting any read data - the reason
		1893	is that AnyEvent::Handle always reads in TLS mode.
		1894
		1895	During the connection, you have to make sure that you always have a
		1896	non-empty read-queue, or an C<on_read> watcher. At the end of the
		1897	connection (or when you no longer want to use it) you can call the
		1898	C<destroy> method.
		1899
		1900	=item How do I read data until the other side closes the connection?
		1901
		1902	If you just want to read your data into a perl scalar, the easiest way
		1903	to achieve this is by setting an C<on_read> callback that does nothing,
		1904	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		1905	will be in C<$_[0]{rbuf}>:
		1906
		1907	$handle->on_read (sub { });
		1908	$handle->on_eof (undef);
		1909	$handle->on_error (sub {
		1910	my $data = delete $_[0]{rbuf};
		1911	});
		1912
		1913	The reason to use C<on_error> is that TCP connections, due to latencies
		1914	and packets loss, might get closed quite violently with an error, when in
		1915	fact, all data has been received.
		1916
		1917	It is usually better to use acknowledgements when transferring data,
		1918	to make sure the other side hasn't just died and you got the data
		1919	intact. This is also one reason why so many internet protocols have an
		1920	explicit QUIT command.
		1921
		1922	=item I don't want to destroy the handle too early - how do I wait until
		1923	all data has been written?
		1924
		1925	After writing your last bits of data, set the C<on_drain> callback
		1926	and destroy the handle in there - with the default setting of
		1927	C<low_water_mark> this will be called precisely when all data has been
		1928	written to the socket:
		1929
		1930	$handle->push_write (...);
		1931	$handle->on_drain (sub {
		1932	warn "all data submitted to the kernel\n";
		1933	undef $handle;
		1934	});
		1935
		1936	If you just want to queue some data and then signal EOF to the other side,
		1937	consider using C<< ->push_shutdown >> instead.
		1938
		1939	=item I want to contact a TLS/SSL server, I don't care about security.
		1940
		1941	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		1942	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		1943	parameter:
		1944
		1945	tcp_connect $host, $port, sub {
		1946	my ($fh) = @_;
		1947
		1948	my $handle = new AnyEvent::Handle
		1949	fh => $fh,
		1950	tls => "connect",
		1951	on_error => sub { ... };
		1952
		1953	$handle->push_write (...);
		1954	};
		1955
		1956	=item I want to contact a TLS/SSL server, I do care about security.
		1957
		1958	Then you should additionally enable certificate verification, including
		1959	peername verification, if the protocol you use supports it (see
		1960	L<AnyEvent::TLS>, C<verify_peername>).
		1961
		1962	E.g. for HTTPS:
		1963
		1964	tcp_connect $host, $port, sub {
		1965	my ($fh) = @_;
		1966
		1967	my $handle = new AnyEvent::Handle
		1968	fh => $fh,
		1969	peername => $host,
		1970	tls => "connect",
		1971	tls_ctx => { verify => 1, verify_peername => "https" },
		1972	...
		1973
		1974	Note that you must specify the hostname you connected to (or whatever
		1975	"peername" the protocol needs) as the C<peername> argument, otherwise no
		1976	peername verification will be done.
		1977
		1978	The above will use the system-dependent default set of trusted CA
		1979	certificates. If you want to check against a specific CA, add the
		1980	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		1981
		1982	tls_ctx => {
		1983	verify => 1,
		1984	verify_peername => "https",
		1985	ca_file => "my-ca-cert.pem",
		1986	},
		1987
		1988	=item I want to create a TLS/SSL server, how do I do that?
		1989
		1990	Well, you first need to get a server certificate and key. You have
		1991	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		1992	self-signed certificate (cheap. check the search engine of your choice,
		1993	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		1994	nice program for that purpose).
		1995
		1996	Then create a file with your private key (in PEM format, see
		1997	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		1998	file should then look like this:
		1999
		2000	-----BEGIN RSA PRIVATE KEY-----
		2001	...header data
		2002	... lots of base64'y-stuff
		2003	-----END RSA PRIVATE KEY-----
		2004
		2005	-----BEGIN CERTIFICATE-----
		2006	... lots of base64'y-stuff
		2007	-----END CERTIFICATE-----
		2008
		2009	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2010	specify this file as C<cert_file>:
		2011
		2012	tcp_server undef, $port, sub {
		2013	my ($fh) = @_;
		2014
		2015	my $handle = new AnyEvent::Handle
		2016	fh => $fh,
		2017	tls => "accept",
		2018	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2019	...
		2020
		2021	When you have intermediate CA certificates that your clients might not
		2022	know about, just append them to the C<cert_file>.
		2023
		2024	=back
		2025
		2026
		2027	=head1 SUBCLASSING AnyEvent::Handle
		2028
		2029	In many cases, you might want to subclass AnyEvent::Handle.
		2030
		2031	To make this easier, a given version of AnyEvent::Handle uses these
		2032	conventions:
		2033
		2034	=over 4
		2035
		2036	=item * all constructor arguments become object members.
		2037
		2038	At least initially, when you pass a C<tls>-argument to the constructor it
		2039	will end up in C<< $handle->{tls} >>. Those members might be changed or
		2040	mutated later on (for example C<tls> will hold the TLS connection object).
		2041
		2042	=item * other object member names are prefixed with an C<_>.
		2043
		2044	All object members not explicitly documented (internal use) are prefixed
		2045	with an underscore character, so the remaining non-C<_>-namespace is free
		2046	for use for subclasses.
		2047
		2048	=item * all members not documented here and not prefixed with an underscore
		2049	are free to use in subclasses.
		2050
		2051	Of course, new versions of AnyEvent::Handle may introduce more "public"
		2052	member variables, but thats just life, at least it is documented.
		2053
		2054	=back
		2055
947	=head1 AUTHOR	2056	=head1 AUTHOR
948		2057
949	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	2058	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
950		2059
951	=cut	2060	=cut

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines