[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.38 by root, Mon May 26 21:28:33 2008 UTC vs.
Revision 1.91 by root, Wed Oct 1 07:40:39 2008 UTC

…		…
1	package AnyEvent::Handle;	1	package AnyEvent::Handle;
2		2
3	no warnings;	3	no warnings;
4	use strict;	4	use strict qw(subs vars);
5		5
6	use AnyEvent ();	6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAWOULDBLOCK);	7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();	8	use Scalar::Util ();
9	use Carp ();	9	use Carp ();
10	use Fcntl ();	10	use Fcntl ();
11	use Errno qw/EAGAIN EINTR/;	11	use Errno qw(EAGAIN EINTR);
12		12
13	=head1 NAME	13	=head1 NAME
14		14
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		16
17	=cut	17	=cut
18		18
19	our $VERSION = '0.04';	19	our $VERSION = 4.3;
20		20
21	=head1 SYNOPSIS	21	=head1 SYNOPSIS
22		22
23	use AnyEvent;	23	use AnyEvent;
24	use AnyEvent::Handle;	24	use AnyEvent::Handle;
49		49
50	This module is a helper module to make it easier to do event-based I/O on	50	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	51	filehandles. For utility functions for doing non-blocking connects and accepts
52	on sockets see L<AnyEvent::Util>.	52	on sockets see L<AnyEvent::Util>.
53		53
		54	The L<AnyEvent::Intro> tutorial contains some well-documented
		55	AnyEvent::Handle examples.
		56
54	In the following, when the documentation refers to of "bytes" then this	57	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	58	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	59	treatment of characters applies to this module as well.
57		60
58	All callbacks will be invoked with the handle object as their first	61	All callbacks will be invoked with the handle object as their first
59	argument.	62	argument.
60		63
		64	=head2 SIGPIPE is not handled by this module
		65
		66	SIGPIPE is not handled by this module, so one of the practical
		67	requirements of using it is to ignore SIGPIPE (C<$SIG{PIPE} =
		68	'IGNORE'>). At least, this is highly recommend in a networked program: If
		69	you use AnyEvent::Handle in a filter program (like sort), exiting on
		70	SIGPIPE is probably the right thing to do.
		71
61	=head1 METHODS	72	=head1 METHODS
62		73
63	=over 4	74	=over 4
64		75
65	=item B<new (%args)>	76	=item B<new (%args)>
…		…
70		81
71	=item fh => $filehandle [MANDATORY]	82	=item fh => $filehandle [MANDATORY]
72		83
73	The filehandle this L<AnyEvent::Handle> object will operate on.	84	The filehandle this L<AnyEvent::Handle> object will operate on.
74		85
75	NOTE: The filehandle will be set to non-blocking (using	86	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	87	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		88	that mode.
77		89
78	=item on_eof => $cb->($self)	90	=item on_eof => $cb->($handle)
79		91
80	Set the callback to be called on EOF.	92	Set the callback to be called when an end-of-file condition is detected,
		93	i.e. in the case of a socket, when the other side has closed the
		94	connection cleanly.
81		95
		96	For sockets, this just means that the other side has stopped sending data,
		97	you can still try to write data, and, in fact, one can return from the eof
		98	callback and continue writing data, as only the read part has been shut
		99	down.
		100
82	While not mandatory, it is highly recommended to set an eof callback,	101	While not mandatory, it is I<highly> recommended to set an eof callback,
83	otherwise you might end up with a closed socket while you are still	102	otherwise you might end up with a closed socket while you are still
84	waiting for data.	103	waiting for data.
85		104
		105	If an EOF condition has been detected but no C<on_eof> callback has been
		106	set, then a fatal error will be raised with C<$!> set to <0>.
		107
86	=item on_error => $cb->($self)	108	=item on_error => $cb->($handle, $fatal)
87		109
88	This is the fatal error callback, that is called when, well, a fatal error	110	This is the error callback, which is called when, well, some error
89	occurs, such as not being able to resolve the hostname, failure to connect	111	occured, such as not being able to resolve the hostname, failure to
90	or a read error.	112	connect or a read error.
91		113
92	The object will not be in a usable state when this callback has been	114	Some errors are fatal (which is indicated by C<$fatal> being true). On
93	called.	115	fatal errors the handle object will be shut down and will not be usable
		116	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
		117	errors are an EOF condition with active (but unsatisifable) read watchers
		118	(C<EPIPE>) or I/O errors.
		119
		120	Non-fatal errors can be retried by simply returning, but it is recommended
		121	to simply ignore this parameter and instead abondon the handle object
		122	when this callback is invoked. Examples of non-fatal errors are timeouts
		123	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
94		124
95	On callback entrance, the value of C<$!> contains the operating system	125	On callback entrance, the value of C<$!> contains the operating system
96	error (or C<ENOSPC>, C<EPIPE> or C<EBADMSG>).	126	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
97
98	The callback should throw an exception. If it returns, then
99	AnyEvent::Handle will C<croak> for you.
100		127
101	While not mandatory, it is I<highly> recommended to set this callback, as	128	While not mandatory, it is I<highly> recommended to set this callback, as
102	you will not be notified of errors otherwise. The default simply calls	129	you will not be notified of errors otherwise. The default simply calls
103	die.	130	C<croak>.
104		131
105	=item on_read => $cb->($self)	132	=item on_read => $cb->($handle)
106		133
107	This sets the default read callback, which is called when data arrives	134	This sets the default read callback, which is called when data arrives
108	and no read request is in the queue.	135	and no read request is in the queue (unlike read queue callbacks, this
		136	callback will only be called when at least one octet of data is in the
		137	read buffer).
109		138
110	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	139	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
111	method or access the C<$self->{rbuf}> member directly.	140	method or access the C<$handle->{rbuf}> member directly.
112		141
113	When an EOF condition is detected then AnyEvent::Handle will first try to	142	When an EOF condition is detected then AnyEvent::Handle will first try to
114	feed all the remaining data to the queued callbacks and C<on_read> before	143	feed all the remaining data to the queued callbacks and C<on_read> before
115	calling the C<on_eof> callback. If no progress can be made, then a fatal	144	calling the C<on_eof> callback. If no progress can be made, then a fatal
116	error will be raised (with C<$!> set to C<EPIPE>).	145	error will be raised (with C<$!> set to C<EPIPE>).
117		146
118	=item on_drain => $cb->()	147	=item on_drain => $cb->($handle)
119		148
120	This sets the callback that is called when the write buffer becomes empty	149	This sets the callback that is called when the write buffer becomes empty
121	(or when the callback is set and the buffer is empty already).	150	(or when the callback is set and the buffer is empty already).
122		151
123	To append to the write buffer, use the C<< ->push_write >> method.	152	To append to the write buffer, use the C<< ->push_write >> method.
124		153
		154	This callback is useful when you don't want to put all of your write data
		155	into the queue at once, for example, when you want to write the contents
		156	of some file to the socket you might not want to read the whole file into
		157	memory and push it into the queue, but instead only read more data from
		158	the file when the write queue becomes empty.
		159
		160	=item timeout => $fractional_seconds
		161
		162	If non-zero, then this enables an "inactivity" timeout: whenever this many
		163	seconds pass without a successful read or write on the underlying file
		164	handle, the C<on_timeout> callback will be invoked (and if that one is
		165	missing, a non-fatal C<ETIMEDOUT> error will be raised).
		166
		167	Note that timeout processing is also active when you currently do not have
		168	any outstanding read or write requests: If you plan to keep the connection
		169	idle then you should disable the timout temporarily or ignore the timeout
		170	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		171	restart the timeout.
		172
		173	Zero (the default) disables this timeout.
		174
		175	=item on_timeout => $cb->($handle)
		176
		177	Called whenever the inactivity timeout passes. If you return from this
		178	callback, then the timeout will be reset as if some activity had happened,
		179	so this condition is not fatal in any way.
		180
125	=item rbuf_max => <bytes>	181	=item rbuf_max => <bytes>
126		182
127	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	183	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
128	when the read buffer ever (strictly) exceeds this size. This is useful to	184	when the read buffer ever (strictly) exceeds this size. This is useful to
129	avoid denial-of-service attacks.	185	avoid some forms of denial-of-service attacks.
130		186
131	For example, a server accepting connections from untrusted sources should	187	For example, a server accepting connections from untrusted sources should
132	be configured to accept only so-and-so much data that it cannot act on	188	be configured to accept only so-and-so much data that it cannot act on
133	(for example, when expecting a line, an attacker could send an unlimited	189	(for example, when expecting a line, an attacker could send an unlimited
134	amount of data without a callback ever being called as long as the line	190	amount of data without a callback ever being called as long as the line
135	isn't finished).	191	isn't finished).
136		192
		193	=item autocork => <boolean>
		194
		195	When disabled (the default), then C<push_write> will try to immediately
		196	write the data to the handle, if possible. This avoids having to register
		197	a write watcher and wait for the next event loop iteration, but can
		198	be inefficient if you write multiple small chunks (on the wire, this
		199	disadvantage is usually avoided by your kernel's nagle algorithm, see
		200	C<no_delay>, but this option can save costly syscalls).
		201
		202	When enabled, then writes will always be queued till the next event loop
		203	iteration. This is efficient when you do many small writes per iteration,
		204	but less efficient when you do a single write only per iteration (or when
		205	the write buffer often is full). It also increases write latency.
		206
		207	=item no_delay => <boolean>
		208
		209	When doing small writes on sockets, your operating system kernel might
		210	wait a bit for more data before actually sending it out. This is called
		211	the Nagle algorithm, and usually it is beneficial.
		212
		213	In some situations you want as low a delay as possible, which can be
		214	accomplishd by setting this option to a true value.
		215
		216	The default is your opertaing system's default behaviour (most likely
		217	enabled), this option explicitly enables or disables it, if possible.
		218
137	=item read_size => <bytes>	219	=item read_size => <bytes>
138		220
139	The default read block size (the amount of bytes this module will try to read	221	The default read block size (the amount of bytes this module will
140	on each [loop iteration). Default: C<4096>.	222	try to read during each loop iteration, which affects memory
		223	requirements). Default: C<8192>.
141		224
142	=item low_water_mark => <bytes>	225	=item low_water_mark => <bytes>
143		226
144	Sets the amount of bytes (default: C<0>) that make up an "empty" write	227	Sets the amount of bytes (default: C<0>) that make up an "empty" write
145	buffer: If the write reaches this size or gets even samller it is	228	buffer: If the write reaches this size or gets even samller it is
146	considered empty.	229	considered empty.
147		230
		231	Sometimes it can be beneficial (for performance reasons) to add data to
		232	the write buffer before it is fully drained, but this is a rare case, as
		233	the operating system kernel usually buffers data as well, so the default
		234	is good in almost all cases.
		235
		236	=item linger => <seconds>
		237
		238	If non-zero (default: C<3600>), then the destructor of the
		239	AnyEvent::Handle object will check whether there is still outstanding
		240	write data and will install a watcher that will write this data to the
		241	socket. No errors will be reported (this mostly matches how the operating
		242	system treats outstanding data at socket close time).
		243
		244	This will not work for partial TLS data that could not be encoded
		245	yet. This data will be lost.
		246
148	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object	247	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
149		248
150	When this parameter is given, it enables TLS (SSL) mode, that means it	249	When this parameter is given, it enables TLS (SSL) mode, that means
151	will start making tls handshake and will transparently encrypt/decrypt	250	AnyEvent will start a TLS handshake as soon as the conenction has been
152	data.	251	established and will transparently encrypt/decrypt data afterwards.
153		252
154	TLS mode requires Net::SSLeay to be installed (it will be loaded	253	TLS mode requires Net::SSLeay to be installed (it will be loaded
155	automatically when you try to create a TLS handle).	254	automatically when you try to create a TLS handle): this module doesn't
		255	have a dependency on that module, so if your module requires it, you have
		256	to add the dependency yourself.
156		257
157	For the TLS server side, use C<accept>, and for the TLS client side of a	258	Unlike TCP, TLS has a server and client side: for the TLS server side, use
158	connection, use C<connect> mode.	259	C<accept>, and for the TLS client side of a connection, use C<connect>
		260	mode.
159		261
160	You can also provide your own TLS connection object, but you have	262	You can also provide your own TLS connection object, but you have
161	to make sure that you call either C<Net::SSLeay::set_connect_state>	263	to make sure that you call either C<Net::SSLeay::set_connect_state>
162	or C<Net::SSLeay::set_accept_state> on it before you pass it to	264	or C<Net::SSLeay::set_accept_state> on it before you pass it to
163	AnyEvent::Handle.	265	AnyEvent::Handle.
164		266
165	See the C<starttls> method if you need to start TLs negotiation later.	267	See the C<< ->starttls >> method for when need to start TLS negotiation later.
166		268
167	=item tls_ctx => $ssl_ctx	269	=item tls_ctx => $ssl_ctx
168		270
169	Use the given Net::SSLeay::CTX object to create the new TLS connection	271	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection
170	(unless a connection object was specified directly). If this parameter is	272	(unless a connection object was specified directly). If this parameter is
171	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	273	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
172		274
		275	=item json => JSON or JSON::XS object
		276
		277	This is the json coder object used by the C<json> read and write types.
		278
		279	If you don't supply it, then AnyEvent::Handle will create and use a
		280	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		281	texts.
		282
		283	Note that you are responsible to depend on the JSON module if you want to
		284	use this functionality, as AnyEvent does not have a dependency itself.
		285
173	=item filter_r => $cb	286	=item filter_r => $cb
174		287
175	=item filter_w => $cb	288	=item filter_w => $cb
176		289
177	These exist, but are undocumented at this time.	290	These exist, but are undocumented at this time. (They are used internally
		291	by the TLS code).
178		292
179	=back	293	=back
180		294
181	=cut	295	=cut
182		296
…		…
192	if ($self->{tls}) {	306	if ($self->{tls}) {
193	require Net::SSLeay;	307	require Net::SSLeay;
194	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	308	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});
195	}	309	}
196		310
197	$self->on_eof (delete $self->{on_eof} ) if $self->{on_eof};	311	$self->{_activity} = AnyEvent->now;
198	$self->on_error (delete $self->{on_error}) if $self->{on_error};	312	$self->_timeout;
		313
199	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	314	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};
200	$self->on_read (delete $self->{on_read} ) if $self->{on_read};	315	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
201		316
202	$self->start_read;	317	$self->start_read
		318	if $self->{on_read};
203		319
204	$self	320	$self
205	}	321	}
206		322
207	sub _shutdown {	323	sub _shutdown {
208	my ($self) = @_;	324	my ($self) = @_;
209		325
		326	delete $self->{_tw};
210	delete $self->{_rw};	327	delete $self->{_rw};
211	delete $self->{_ww};	328	delete $self->{_ww};
212	delete $self->{fh};	329	delete $self->{fh};
213	}
214		330
		331	$self->stoptls;
		332
		333	delete $self->{on_read};
		334	delete $self->{_queue};
		335	}
		336
215	sub error {	337	sub _error {
216	my ($self) = @_;	338	my ($self, $errno, $fatal) = @_;
217		339
218	{
219	local $!;
220	$self->_shutdown;	340	$self->_shutdown
221	}	341	if $fatal;
222		342
223	$self->{on_error}($self)	343	$! = $errno;
		344
224	if $self->{on_error};	345	if ($self->{on_error}) {
225		346	$self->{on_error}($self, $fatal);
		347	} else {
226	Carp::croak "AnyEvent::Handle uncaught fatal error: $!";	348	Carp::croak "AnyEvent::Handle uncaught error: $!";
		349	}
227	}	350	}
228		351
229	=item $fh = $handle->fh	352	=item $fh = $handle->fh
230		353
231	This method returns the file handle of the L<AnyEvent::Handle> object.	354	This method returns the file handle used to create the L<AnyEvent::Handle> object.
232		355
233	=cut	356	=cut
234		357
235	sub fh { $_[0]{fh} }	358	sub fh { $_[0]{fh} }
236		359
…		…
250		373
251	=cut	374	=cut
252		375
253	sub on_eof {	376	sub on_eof {
254	$_[0]{on_eof} = $_[1];	377	$_[0]{on_eof} = $_[1];
		378	}
		379
		380	=item $handle->on_timeout ($cb)
		381
		382	Replace the current C<on_timeout> callback, or disables the callback (but
		383	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
		384	argument and method.
		385
		386	=cut
		387
		388	sub on_timeout {
		389	$_[0]{on_timeout} = $_[1];
		390	}
		391
		392	=item $handle->autocork ($boolean)
		393
		394	Enables or disables the current autocork behaviour (see C<autocork>
		395	constructor argument).
		396
		397	=cut
		398
		399	=item $handle->no_delay ($boolean)
		400
		401	Enables or disables the C<no_delay> setting (see constructor argument of
		402	the same name for details).
		403
		404	=cut
		405
		406	sub no_delay {
		407	$_[0]{no_delay} = $_[1];
		408
		409	eval {
		410	local $SIG{__DIE__};
		411	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];
		412	};
		413	}
		414
		415	#############################################################################
		416
		417	=item $handle->timeout ($seconds)
		418
		419	Configures (or disables) the inactivity timeout.
		420
		421	=cut
		422
		423	sub timeout {
		424	my ($self, $timeout) = @_;
		425
		426	$self->{timeout} = $timeout;
		427	$self->_timeout;
		428	}
		429
		430	# reset the timeout watcher, as neccessary
		431	# also check for time-outs
		432	sub _timeout {
		433	my ($self) = @_;
		434
		435	if ($self->{timeout}) {
		436	my $NOW = AnyEvent->now;
		437
		438	# when would the timeout trigger?
		439	my $after = $self->{_activity} + $self->{timeout} - $NOW;
		440
		441	# now or in the past already?
		442	if ($after <= 0) {
		443	$self->{_activity} = $NOW;
		444
		445	if ($self->{on_timeout}) {
		446	$self->{on_timeout}($self);
		447	} else {
		448	$self->_error (&Errno::ETIMEDOUT);
		449	}
		450
		451	# callback could have changed timeout value, optimise
		452	return unless $self->{timeout};
		453
		454	# calculate new after
		455	$after = $self->{timeout};
		456	}
		457
		458	Scalar::Util::weaken $self;
		459	return unless $self; # ->error could have destroyed $self
		460
		461	$self->{_tw} \|\|= AnyEvent->timer (after => $after, cb => sub {
		462	delete $self->{_tw};
		463	$self->_timeout;
		464	});
		465	} else {
		466	delete $self->{_tw};
		467	}
255	}	468	}
256		469
257	#############################################################################	470	#############################################################################
258		471
259	=back	472	=back
…		…
306	my $len = syswrite $self->{fh}, $self->{wbuf};	519	my $len = syswrite $self->{fh}, $self->{wbuf};
307		520
308	if ($len >= 0) {	521	if ($len >= 0) {
309	substr $self->{wbuf}, 0, $len, "";	522	substr $self->{wbuf}, 0, $len, "";
310		523
		524	$self->{_activity} = AnyEvent->now;
		525
311	$self->{on_drain}($self)	526	$self->{on_drain}($self)
312	if $self->{low_water_mark} >= length $self->{wbuf}	527	if $self->{low_water_mark} >= length $self->{wbuf}
313	&& $self->{on_drain};	528	&& $self->{on_drain};
314		529
315	delete $self->{_ww} unless length $self->{wbuf};	530	delete $self->{_ww} unless length $self->{wbuf};
316	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAWOULDBLOCK) {	531	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
317	$self->error;	532	$self->_error ($!, 1);
318	}	533	}
319	};	534	};
320		535
321	# try to write data immediately	536	# try to write data immediately
322	$cb->();	537	$cb->() unless $self->{autocork};
323		538
324	# if still data left in wbuf, we need to poll	539	# if still data left in wbuf, we need to poll
325	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	540	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)
326	if length $self->{wbuf};	541	if length $self->{wbuf};
327	};	542	};
…		…
342	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	557	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
343	->($self, @_);	558	->($self, @_);
344	}	559	}
345		560
346	if ($self->{filter_w}) {	561	if ($self->{filter_w}) {
347	$self->{filter_w}->($self, \$_[0]);	562	$self->{filter_w}($self, \$_[0]);
348	} else {	563	} else {
349	$self->{wbuf} .= $_[0];	564	$self->{wbuf} .= $_[0];
350	$self->_drain_wbuf;	565	$self->_drain_wbuf;
351	}	566	}
352	}	567	}
353		568
354	=item $handle->push_write (type => @args)	569	=item $handle->push_write (type => @args)
355		570
356	=item $handle->unshift_write (type => @args)
357
358	Instead of formatting your data yourself, you can also let this module do	571	Instead of formatting your data yourself, you can also let this module do
359	the job by specifying a type and type-specific arguments.	572	the job by specifying a type and type-specific arguments.
360		573
361	Predefined types are (if you have ideas for additional types, feel free to	574	Predefined types are (if you have ideas for additional types, feel free to
362	drop by and tell us):	575	drop by and tell us):
…		…
366	=item netstring => $string	579	=item netstring => $string
367		580
368	Formats the given value as netstring	581	Formats the given value as netstring
369	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).	582	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).
370		583
371	=back
372
373	=cut	584	=cut
374		585
375	register_write_type netstring => sub {	586	register_write_type netstring => sub {
376	my ($self, $string) = @_;	587	my ($self, $string) = @_;
377		588
378	sprintf "%d:%s,", (length $string), $string	589	sprintf "%d:%s,", (length $string), $string
379	};	590	};
380		591
		592	=item packstring => $format, $data
		593
		594	An octet string prefixed with an encoded length. The encoding C<$format>
		595	uses the same format as a Perl C<pack> format, but must specify a single
		596	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		597	optional C<!>, C<< < >> or C<< > >> modifier).
		598
		599	=cut
		600
		601	register_write_type packstring => sub {
		602	my ($self, $format, $string) = @_;
		603
		604	pack "$format/a*", $string
		605	};
		606
		607	=item json => $array_or_hashref
		608
		609	Encodes the given hash or array reference into a JSON object. Unless you
		610	provide your own JSON object, this means it will be encoded to JSON text
		611	in UTF-8.
		612
		613	JSON objects (and arrays) are self-delimiting, so you can write JSON at
		614	one end of a handle and read them at the other end without using any
		615	additional framing.
		616
		617	The generated JSON text is guaranteed not to contain any newlines: While
		618	this module doesn't need delimiters after or between JSON texts to be
		619	able to read them, many other languages depend on that.
		620
		621	A simple RPC protocol that interoperates easily with others is to send
		622	JSON arrays (or objects, although arrays are usually the better choice as
		623	they mimic how function argument passing works) and a newline after each
		624	JSON text:
		625
		626	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
		627	$handle->push_write ("\012");
		628
		629	An AnyEvent::Handle receiver would simply use the C<json> read type and
		630	rely on the fact that the newline will be skipped as leading whitespace:
		631
		632	$handle->push_read (json => sub { my $array = $_[1]; ... });
		633
		634	Other languages could read single lines terminated by a newline and pass
		635	this line into their JSON decoder of choice.
		636
		637	=cut
		638
		639	register_write_type json => sub {
		640	my ($self, $ref) = @_;
		641
		642	require JSON;
		643
		644	$self->{json} ? $self->{json}->encode ($ref)
		645	: JSON::encode_json ($ref)
		646	};
		647
		648	=item storable => $reference
		649
		650	Freezes the given reference using L<Storable> and writes it to the
		651	handle. Uses the C<nfreeze> format.
		652
		653	=cut
		654
		655	register_write_type storable => sub {
		656	my ($self, $ref) = @_;
		657
		658	require Storable;
		659
		660	pack "w/a*", Storable::nfreeze ($ref)
		661	};
		662
		663	=back
		664
381	=item AnyEvent::Handle::register_write_type type => $coderef->($self, @args)	665	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
382		666
383	This function (not method) lets you add your own types to C<push_write>.	667	This function (not method) lets you add your own types to C<push_write>.
384	Whenever the given C<type> is used, C<push_write> will invoke the code	668	Whenever the given C<type> is used, C<push_write> will invoke the code
385	reference with the handle object and the remaining arguments.	669	reference with the handle object and the remaining arguments.
386		670
…		…
405	ways, the "simple" way, using only C<on_read> and the "complex" way, using	689	ways, the "simple" way, using only C<on_read> and the "complex" way, using
406	a queue.	690	a queue.
407		691
408	In the simple case, you just install an C<on_read> callback and whenever	692	In the simple case, you just install an C<on_read> callback and whenever
409	new data arrives, it will be called. You can then remove some data (if	693	new data arrives, it will be called. You can then remove some data (if
410	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	694	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
411	or not.	695	leave the data there if you want to accumulate more (e.g. when only a
		696	partial message has been received so far).
412		697
413	In the more complex case, you want to queue multiple callbacks. In this	698	In the more complex case, you want to queue multiple callbacks. In this
414	case, AnyEvent::Handle will call the first queued callback each time new	699	case, AnyEvent::Handle will call the first queued callback each time new
415	data arrives and removes it when it has done its job (see C<push_read>,	700	data arrives (also the first time it is queued) and removes it when it has
416	below).	701	done its job (see C<push_read>, below).
417		702
418	This way you can, for example, push three line-reads, followed by reading	703	This way you can, for example, push three line-reads, followed by reading
419	a chunk of data, and AnyEvent::Handle will execute them in order.	704	a chunk of data, and AnyEvent::Handle will execute them in order.
420		705
421	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	706	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
422	the specified number of bytes which give an XML datagram.	707	the specified number of bytes which give an XML datagram.
423		708
424	# in the default state, expect some header bytes	709	# in the default state, expect some header bytes
425	$handle->on_read (sub {	710	$handle->on_read (sub {
426	# some data is here, now queue the length-header-read (4 octets)	711	# some data is here, now queue the length-header-read (4 octets)
427	shift->unshift_read_chunk (4, sub {	712	shift->unshift_read (chunk => 4, sub {
428	# header arrived, decode	713	# header arrived, decode
429	my $len = unpack "N", $_[1];	714	my $len = unpack "N", $_[1];
430		715
431	# now read the payload	716	# now read the payload
432	shift->unshift_read_chunk ($len, sub {	717	shift->unshift_read (chunk => $len, sub {
433	my $xml = $_[1];	718	my $xml = $_[1];
434	# handle xml	719	# handle xml
435	});	720	});
436	});	721	});
437	});	722	});
438		723
439	Example 2: Implement a client for a protocol that replies either with	724	Example 2: Implement a client for a protocol that replies either with "OK"
440	"OK" and another line or "ERROR" for one request, and 64 bytes for the	725	and another line or "ERROR" for the first request that is sent, and 64
441	second request. Due tot he availability of a full queue, we can just	726	bytes for the second request. Due to the availability of a queue, we can
442	pipeline sending both requests and manipulate the queue as necessary in	727	just pipeline sending both requests and manipulate the queue as necessary
443	the callbacks:	728	in the callbacks.
444		729
445	# request one	730	When the first callback is called and sees an "OK" response, it will
		731	C<unshift> another line-read. This line-read will be queued I<before> the
		732	64-byte chunk callback.
		733
		734	# request one, returns either "OK + extra line" or "ERROR"
446	$handle->push_write ("request 1\015\012");	735	$handle->push_write ("request 1\015\012");
447		736
448	# we expect "ERROR" or "OK" as response, so push a line read	737	# we expect "ERROR" or "OK" as response, so push a line read
449	$handle->push_read_line (sub {	738	$handle->push_read (line => sub {
450	# if we got an "OK", we have to _prepend_ another line,	739	# if we got an "OK", we have to _prepend_ another line,
451	# so it will be read before the second request reads its 64 bytes	740	# so it will be read before the second request reads its 64 bytes
452	# which are already in the queue when this callback is called	741	# which are already in the queue when this callback is called
453	# we don't do this in case we got an error	742	# we don't do this in case we got an error
454	if ($_[1] eq "OK") {	743	if ($_[1] eq "OK") {
455	$_[0]->unshift_read_line (sub {	744	$_[0]->unshift_read (line => sub {
456	my $response = $_[1];	745	my $response = $_[1];
457	...	746	...
458	});	747	});
459	}	748	}
460	});	749	});
461		750
462	# request two	751	# request two, simply returns 64 octets
463	$handle->push_write ("request 2\015\012");	752	$handle->push_write ("request 2\015\012");
464		753
465	# simply read 64 bytes, always	754	# simply read 64 bytes, always
466	$handle->push_read_chunk (64, sub {	755	$handle->push_read (chunk => 64, sub {
467	my $response = $_[1];	756	my $response = $_[1];
468	...	757	...
469	});	758	});
470		759
471	=over 4	760	=over 4
472		761
473	=cut	762	=cut
474		763
475	sub _drain_rbuf {	764	sub _drain_rbuf {
476	my ($self) = @_;	765	my ($self) = @_;
		766
		767	local $self->{_in_drain} = 1;
477		768
478	if (	769	if (
479	defined $self->{rbuf_max}	770	defined $self->{rbuf_max}
480	&& $self->{rbuf_max} < length $self->{rbuf}	771	&& $self->{rbuf_max} < length $self->{rbuf}
481	) {	772	) {
482	$! = &Errno::ENOSPC;	773	$self->_error (&Errno::ENOSPC, 1), return;
483	$self->error;
484	}	774	}
485		775
486	return if $self->{in_drain};	776	while () {
487	local $self->{in_drain} = 1;
488
489	while (my $len = length $self->{rbuf}) {	777	my $len = length $self->{rbuf};
490	no strict 'refs';	778
491	if (my $cb = shift @{ $self->{_queue} }) {	779	if (my $cb = shift @{ $self->{_queue} }) {
492	unless ($cb->($self)) {	780	unless ($cb->($self)) {
493	if ($self->{_eof}) {	781	if ($self->{_eof}) {
494	# no progress can be made (not enough data and no data forthcoming)	782	# no progress can be made (not enough data and no data forthcoming)
495	$! = &Errno::EPIPE;	783	$self->_error (&Errno::EPIPE, 1), return;
496	$self->error;
497	}	784	}
498		785
499	unshift @{ $self->{_queue} }, $cb;	786	unshift @{ $self->{_queue} }, $cb;
500	return;	787	last;
501	}	788	}
502	} elsif ($self->{on_read}) {	789	} elsif ($self->{on_read}) {
		790	last unless $len;
		791
503	$self->{on_read}($self);	792	$self->{on_read}($self);
504		793
505	if (	794	if (
506	$self->{_eof} # if no further data will arrive
507	&& $len == length $self->{rbuf} # and no data has been consumed	795	$len == length $self->{rbuf} # if no data has been consumed
508	&& !@{ $self->{_queue} } # and the queue is still empty	796	&& !@{ $self->{_queue} } # and the queue is still empty
509	&& $self->{on_read} # and we still want to read data	797	&& $self->{on_read} # but we still have on_read
510	) {	798	) {
		799	# no further data will arrive
511	# then no progress can be made	800	# so no progress can be made
512	$! = &Errno::EPIPE;	801	$self->_error (&Errno::EPIPE, 1), return
513	$self->error;	802	if $self->{_eof};
		803
		804	last; # more data might arrive
514	}	805	}
515	} else {	806	} else {
516	# read side becomes idle	807	# read side becomes idle
517	delete $self->{_rw};	808	delete $self->{_rw};
518	return;	809	last;
519	}	810	}
520	}	811	}
521		812
522	if ($self->{_eof}) {	813	if ($self->{_eof}) {
523	$self->_shutdown;	814	if ($self->{on_eof}) {
524	$self->{on_eof}($self)	815	$self->{on_eof}($self)
525	if $self->{on_eof};	816	} else {
		817	$self->_error (0, 1);
		818	}
		819	}
		820
		821	# may need to restart read watcher
		822	unless ($self->{_rw}) {
		823	$self->start_read
		824	if $self->{on_read} \|\| @{ $self->{_queue} };
526	}	825	}
527	}	826	}
528		827
529	=item $handle->on_read ($cb)	828	=item $handle->on_read ($cb)
530		829
…		…
536		835
537	sub on_read {	836	sub on_read {
538	my ($self, $cb) = @_;	837	my ($self, $cb) = @_;
539		838
540	$self->{on_read} = $cb;	839	$self->{on_read} = $cb;
		840	$self->_drain_rbuf if $cb && !$self->{_in_drain};
541	}	841	}
542		842
543	=item $handle->rbuf	843	=item $handle->rbuf
544		844
545	Returns the read buffer (as a modifiable lvalue).	845	Returns the read buffer (as a modifiable lvalue).
…		…
594	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	894	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
595	->($self, $cb, @_);	895	->($self, $cb, @_);
596	}	896	}
597		897
598	push @{ $self->{_queue} }, $cb;	898	push @{ $self->{_queue} }, $cb;
599	$self->_drain_rbuf;	899	$self->_drain_rbuf unless $self->{_in_drain};
600	}	900	}
601		901
602	sub unshift_read {	902	sub unshift_read {
603	my $self = shift;	903	my $self = shift;
604	my $cb = pop;	904	my $cb = pop;
…		…
610	->($self, $cb, @_);	910	->($self, $cb, @_);
611	}	911	}
612		912
613		913
614	unshift @{ $self->{_queue} }, $cb;	914	unshift @{ $self->{_queue} }, $cb;
615	$self->_drain_rbuf;	915	$self->_drain_rbuf unless $self->{_in_drain};
616	}	916	}
617		917
618	=item $handle->push_read (type => @args, $cb)	918	=item $handle->push_read (type => @args, $cb)
619		919
620	=item $handle->unshift_read (type => @args, $cb)	920	=item $handle->unshift_read (type => @args, $cb)
…		…
626	Predefined types are (if you have ideas for additional types, feel free to	926	Predefined types are (if you have ideas for additional types, feel free to
627	drop by and tell us):	927	drop by and tell us):
628		928
629	=over 4	929	=over 4
630		930
631	=item chunk => $octets, $cb->($self, $data)	931	=item chunk => $octets, $cb->($handle, $data)
632		932
633	Invoke the callback only once C<$octets> bytes have been read. Pass the	933	Invoke the callback only once C<$octets> bytes have been read. Pass the
634	data read to the callback. The callback will never be called with less	934	data read to the callback. The callback will never be called with less
635	data.	935	data.
636		936
…		…
650	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	950	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
651	1	951	1
652	}	952	}
653	};	953	};
654		954
655	# compatibility with older API
656	sub push_read_chunk {
657	$_[0]->push_read (chunk => $_[1], $_[2]);
658	}
659
660	sub unshift_read_chunk {
661	$_[0]->unshift_read (chunk => $_[1], $_[2]);
662	}
663
664	=item line => [$eol, ]$cb->($self, $line, $eol)	955	=item line => [$eol, ]$cb->($handle, $line, $eol)
665		956
666	The callback will be called only once a full line (including the end of	957	The callback will be called only once a full line (including the end of
667	line marker, C<$eol>) has been read. This line (excluding the end of line	958	line marker, C<$eol>) has been read. This line (excluding the end of line
668	marker) will be passed to the callback as second argument (C<$line>), and	959	marker) will be passed to the callback as second argument (C<$line>), and
669	the end of line marker as the third argument (C<$eol>).	960	the end of line marker as the third argument (C<$eol>).
…		…
683	=cut	974	=cut
684		975
685	register_read_type line => sub {	976	register_read_type line => sub {
686	my ($self, $cb, $eol) = @_;	977	my ($self, $cb, $eol) = @_;
687		978
688	$eol = qr\|(\015?\012)\| if @_ < 3;	979	if (@_ < 3) {
		980	# this is more than twice as fast as the generic code below
		981	sub {
		982	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
		983
		984	$cb->($_[0], $1, $2);
		985	1
		986	}
		987	} else {
689	$eol = quotemeta $eol unless ref $eol;	988	$eol = quotemeta $eol unless ref $eol;
690	$eol = qr\|^(.*?)($eol)\|s;	989	$eol = qr\|^(.*?)($eol)\|s;
691		990
692	sub {	991	sub {
693	$_[0]{rbuf} =~ s/$eol// or return;	992	$_[0]{rbuf} =~ s/$eol// or return;
694		993
695	$cb->($_[0], $1, $2);	994	$cb->($_[0], $1, $2);
		995	1
696	1	996	}
697	}	997	}
698	};	998	};
699		999
700	# compatibility with older API
701	sub push_read_line {
702	my $self = shift;
703	$self->push_read (line => @_);
704	}
705
706	sub unshift_read_line {
707	my $self = shift;
708	$self->unshift_read (line => @_);
709	}
710
711	=item netstring => $cb->($string)
712
713	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
714
715	Throws an error with C<$!> set to EBADMSG on format violations.
716
717	=cut
718
719	register_read_type netstring => sub {
720	my ($self, $cb) = @_;
721
722	sub {
723	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
724	if ($_[0]{rbuf} =~ /[^0-9]/) {
725	$! = &Errno::EBADMSG;
726	$self->error;
727	}
728	return;
729	}
730
731	my $len = $1;
732
733	$self->unshift_read (chunk => $len, sub {
734	my $string = $_[1];
735	$_[0]->unshift_read (chunk => 1, sub {
736	if ($_[1] eq ",") {
737	$cb->($_[0], $string);
738	} else {
739	$! = &Errno::EBADMSG;
740	$self->error;
741	}
742	});
743	});
744
745	1
746	}
747	};
748
749	=item regex => $accept[, $reject[, $skip], $cb->($data)	1000	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
750		1001
751	Makes a regex match against the regex object C<$accept> and returns	1002	Makes a regex match against the regex object C<$accept> and returns
752	everything up to and including the match.	1003	everything up to and including the match.
753		1004
754	Example: read a single line terminated by '\n'.	1005	Example: read a single line terminated by '\n'.
…		…
802	return 1;	1053	return 1;
803	}	1054	}
804		1055
805	# reject	1056	# reject
806	if ($reject && $$rbuf =~ $reject) {	1057	if ($reject && $$rbuf =~ $reject) {
807	$! = &Errno::EBADMSG;	1058	$self->_error (&Errno::EBADMSG);
808	$self->error;
809	}	1059	}
810		1060
811	# skip	1061	# skip
812	if ($skip && $$rbuf =~ $skip) {	1062	if ($skip && $$rbuf =~ $skip) {
813	$data .= substr $$rbuf, 0, $+[0], "";	1063	$data .= substr $$rbuf, 0, $+[0], "";
…		…
815		1065
816	()	1066	()
817	}	1067	}
818	};	1068	};
819		1069
		1070	=item netstring => $cb->($handle, $string)
		1071
		1072	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
		1073
		1074	Throws an error with C<$!> set to EBADMSG on format violations.
		1075
		1076	=cut
		1077
		1078	register_read_type netstring => sub {
		1079	my ($self, $cb) = @_;
		1080
		1081	sub {
		1082	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
		1083	if ($_[0]{rbuf} =~ /[^0-9]/) {
		1084	$self->_error (&Errno::EBADMSG);
		1085	}
		1086	return;
		1087	}
		1088
		1089	my $len = $1;
		1090
		1091	$self->unshift_read (chunk => $len, sub {
		1092	my $string = $_[1];
		1093	$_[0]->unshift_read (chunk => 1, sub {
		1094	if ($_[1] eq ",") {
		1095	$cb->($_[0], $string);
		1096	} else {
		1097	$self->_error (&Errno::EBADMSG);
		1098	}
		1099	});
		1100	});
		1101
		1102	1
		1103	}
		1104	};
		1105
		1106	=item packstring => $format, $cb->($handle, $string)
		1107
		1108	An octet string prefixed with an encoded length. The encoding C<$format>
		1109	uses the same format as a Perl C<pack> format, but must specify a single
		1110	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1111	optional C<!>, C<< < >> or C<< > >> modifier).
		1112
		1113	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.
		1114
		1115	Example: read a block of data prefixed by its length in BER-encoded
		1116	format (very efficient).
		1117
		1118	$handle->push_read (packstring => "w", sub {
		1119	my ($handle, $data) = @_;
		1120	});
		1121
		1122	=cut
		1123
		1124	register_read_type packstring => sub {
		1125	my ($self, $cb, $format) = @_;
		1126
		1127	sub {
		1128	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1129	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
		1130	or return;
		1131
		1132	$format = length pack $format, $len;
		1133
		1134	# bypass unshift if we already have the remaining chunk
		1135	if ($format + $len <= length $_[0]{rbuf}) {
		1136	my $data = substr $_[0]{rbuf}, $format, $len;
		1137	substr $_[0]{rbuf}, 0, $format + $len, "";
		1138	$cb->($_[0], $data);
		1139	} else {
		1140	# remove prefix
		1141	substr $_[0]{rbuf}, 0, $format, "";
		1142
		1143	# read remaining chunk
		1144	$_[0]->unshift_read (chunk => $len, $cb);
		1145	}
		1146
		1147	1
		1148	}
		1149	};
		1150
		1151	=item json => $cb->($handle, $hash_or_arrayref)
		1152
		1153	Reads a JSON object or array, decodes it and passes it to the callback.
		1154
		1155	If a C<json> object was passed to the constructor, then that will be used
		1156	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
		1157
		1158	This read type uses the incremental parser available with JSON version
		1159	2.09 (and JSON::XS version 2.2) and above. You have to provide a
		1160	dependency on your own: this module will load the JSON module, but
		1161	AnyEvent does not depend on it itself.
		1162
		1163	Since JSON texts are fully self-delimiting, the C<json> read and write
		1164	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
		1165	the C<json> write type description, above, for an actual example.
		1166
		1167	=cut
		1168
		1169	register_read_type json => sub {
		1170	my ($self, $cb) = @_;
		1171
		1172	require JSON;
		1173
		1174	my $data;
		1175	my $rbuf = \$self->{rbuf};
		1176
		1177	my $json = $self->{json} \|\|= JSON->new->utf8;
		1178
		1179	sub {
		1180	my $ref = $json->incr_parse ($self->{rbuf});
		1181
		1182	if ($ref) {
		1183	$self->{rbuf} = $json->incr_text;
		1184	$json->incr_text = "";
		1185	$cb->($self, $ref);
		1186
		1187	1
		1188	} else {
		1189	$self->{rbuf} = "";
		1190	()
		1191	}
		1192	}
		1193	};
		1194
		1195	=item storable => $cb->($handle, $ref)
		1196
		1197	Deserialises a L<Storable> frozen representation as written by the
		1198	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1199	data).
		1200
		1201	Raises C<EBADMSG> error if the data could not be decoded.
		1202
		1203	=cut
		1204
		1205	register_read_type storable => sub {
		1206	my ($self, $cb) = @_;
		1207
		1208	require Storable;
		1209
		1210	sub {
		1211	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1212	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
		1213	or return;
		1214
		1215	my $format = length pack "w", $len;
		1216
		1217	# bypass unshift if we already have the remaining chunk
		1218	if ($format + $len <= length $_[0]{rbuf}) {
		1219	my $data = substr $_[0]{rbuf}, $format, $len;
		1220	substr $_[0]{rbuf}, 0, $format + $len, "";
		1221	$cb->($_[0], Storable::thaw ($data));
		1222	} else {
		1223	# remove prefix
		1224	substr $_[0]{rbuf}, 0, $format, "";
		1225
		1226	# read remaining chunk
		1227	$_[0]->unshift_read (chunk => $len, sub {
		1228	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1229	$cb->($_[0], $ref);
		1230	} else {
		1231	$self->_error (&Errno::EBADMSG);
		1232	}
		1233	});
		1234	}
		1235
		1236	1
		1237	}
		1238	};
		1239
820	=back	1240	=back
821		1241
822	=item AnyEvent::Handle::register_read_type type => $coderef->($self, $cb, @args)	1242	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)
823		1243
824	This function (not method) lets you add your own types to C<push_read>.	1244	This function (not method) lets you add your own types to C<push_read>.
825		1245
826	Whenever the given C<type> is used, C<push_read> will invoke the code	1246	Whenever the given C<type> is used, C<push_read> will invoke the code
827	reference with the handle object, the callback and the remaining	1247	reference with the handle object, the callback and the remaining
…		…
829		1249
830	The code reference is supposed to return a callback (usually a closure)	1250	The code reference is supposed to return a callback (usually a closure)
831	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1251	that works as a plain read callback (see C<< ->push_read ($cb) >>).
832		1252
833	It should invoke the passed callback when it is done reading (remember to	1253	It should invoke the passed callback when it is done reading (remember to
834	pass C<$self> as first argument as all other callbacks do that).	1254	pass C<$handle> as first argument as all other callbacks do that).
835		1255
836	Note that this is a function, and all types registered this way will be	1256	Note that this is a function, and all types registered this way will be
837	global, so try to use unique names.	1257	global, so try to use unique names.
838		1258
839	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1259	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,
…		…
842	=item $handle->stop_read	1262	=item $handle->stop_read
843		1263
844	=item $handle->start_read	1264	=item $handle->start_read
845		1265
846	In rare cases you actually do not want to read anything from the	1266	In rare cases you actually do not want to read anything from the
847	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1267	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
848	any queued callbacks will be executed then. To start reading again, call	1268	any queued callbacks will be executed then. To start reading again, call
849	C<start_read>.	1269	C<start_read>.
		1270
		1271	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1272	you change the C<on_read> callback or push/unshift a read callback, and it
		1273	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1274	there are any read requests in the queue.
850		1275
851	=cut	1276	=cut
852		1277
853	sub stop_read {	1278	sub stop_read {
854	my ($self) = @_;	1279	my ($self) = @_;
…		…
865	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1290	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
866	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1291	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};
867	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;	1292	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;
868		1293
869	if ($len > 0) {	1294	if ($len > 0) {
		1295	$self->{_activity} = AnyEvent->now;
		1296
870	$self->{filter_r}	1297	$self->{filter_r}
871	? $self->{filter_r}->($self, $rbuf)	1298	? $self->{filter_r}($self, $rbuf)
872	: $self->_drain_rbuf;	1299	: $self->{_in_drain} \|\| $self->_drain_rbuf;
873		1300
874	} elsif (defined $len) {	1301	} elsif (defined $len) {
875	delete $self->{_rw};	1302	delete $self->{_rw};
876	$self->{_eof} = 1;	1303	$self->{_eof} = 1;
877	$self->_drain_rbuf;	1304	$self->_drain_rbuf unless $self->{_in_drain};
878		1305
879	} elsif ($! != EAGAIN && $! != EINTR && $! != &AnyEvent::Util::WSAWOULDBLOCK) {	1306	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
880	return $self->error;	1307	return $self->_error ($!, 1);
881	}	1308	}
882	});	1309	});
883	}	1310	}
884	}	1311	}
885		1312
886	sub _dotls {	1313	sub _dotls {
887	my ($self) = @_;	1314	my ($self) = @_;
		1315
		1316	my $buf;
888		1317
889	if (length $self->{_tls_wbuf}) {	1318	if (length $self->{_tls_wbuf}) {
890	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1319	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
891	substr $self->{_tls_wbuf}, 0, $len, "";	1320	substr $self->{_tls_wbuf}, 0, $len, "";
892	}	1321	}
893	}	1322	}
894		1323
		1324	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {
		1325	unless (length $buf) {
		1326	# let's treat SSL-eof as we treat normal EOF
		1327	delete $self->{_rw};
		1328	$self->{_eof} = 1;
		1329	}
		1330
		1331	$self->{rbuf} .= $buf;
		1332	$self->_drain_rbuf unless $self->{_in_drain};
		1333
		1334	$self->{tls} or return; # tls could have gone away
		1335	}
		1336
		1337	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
		1338
		1339	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
		1340	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
		1341	return $self->_error ($!, 1);
		1342	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
		1343	return $self->_error (&Errno::EIO, 1);
		1344	}
		1345
		1346	# all others are fine for our purposes
		1347	}
		1348
895	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1349	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {
896	$self->{wbuf} .= $buf;	1350	$self->{wbuf} .= $buf;
897	$self->_drain_wbuf;	1351	$self->_drain_wbuf;
898	}
899
900	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {
901	$self->{rbuf} .= $buf;
902	$self->_drain_rbuf;
903	}
904
905	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
906
907	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
908	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
909	$self->error;
910	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
911	$! = &Errno::EIO;
912	$self->error;
913	}
914
915	# all others are fine for our purposes
916	}	1352	}
917	}	1353	}
918		1354
919	=item $handle->starttls ($tls[, $tls_ctx])	1355	=item $handle->starttls ($tls[, $tls_ctx])
920		1356
…		…
932	call and can be used or changed to your liking. Note that the handshake	1368	call and can be used or changed to your liking. Note that the handshake
933	might have already started when this function returns.	1369	might have already started when this function returns.
934		1370
935	=cut	1371	=cut
936		1372
937	# TODO: maybe document...
938	sub starttls {	1373	sub starttls {
939	my ($self, $ssl, $ctx) = @_;	1374	my ($self, $ssl, $ctx) = @_;
940		1375
941	$self->stoptls;	1376	$self->stoptls;
942		1377
…		…
953	# basically, this is deep magic (because SSL_read should have the same issues)	1388	# basically, this is deep magic (because SSL_read should have the same issues)
954	# but the openssl maintainers basically said: "trust us, it just works".	1389	# but the openssl maintainers basically said: "trust us, it just works".
955	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1390	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
956	# and mismaintained ssleay-module doesn't even offer them).	1391	# and mismaintained ssleay-module doesn't even offer them).
957	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1392	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1393	#
		1394	# in short: this is a mess.
		1395	#
		1396	# note that we do not try to kepe the length constant between writes as we are required to do.
		1397	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1398	# and we drive openssl fully in blocking mode here.
958	Net::SSLeay::CTX_set_mode ($self->{tls},	1399	Net::SSLeay::CTX_set_mode ($self->{tls},
959	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)	1400	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)
960	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));	1401	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));
961		1402
962	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1403	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
…		…
970	};	1411	};
971	$self->{filter_r} = sub {	1412	$self->{filter_r} = sub {
972	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});	1413	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
973	&_dotls;	1414	&_dotls;
974	};	1415	};
		1416
		1417	&_dotls; # need to trigger the initial negotiation exchange
975	}	1418	}
976		1419
977	=item $handle->stoptls	1420	=item $handle->stoptls
978		1421
979	Destroys the SSL connection, if any. Partial read or write data will be	1422	Destroys the SSL connection, if any. Partial read or write data will be
…		…
995		1438
996	sub DESTROY {	1439	sub DESTROY {
997	my $self = shift;	1440	my $self = shift;
998		1441
999	$self->stoptls;	1442	$self->stoptls;
		1443
		1444	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1445
		1446	if ($linger && length $self->{wbuf}) {
		1447	my $fh = delete $self->{fh};
		1448	my $wbuf = delete $self->{wbuf};
		1449
		1450	my @linger;
		1451
		1452	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {
		1453	my $len = syswrite $fh, $wbuf, length $wbuf;
		1454
		1455	if ($len > 0) {
		1456	substr $wbuf, 0, $len, "";
		1457	} else {
		1458	@linger = (); # end
		1459	}
		1460	});
		1461	push @linger, AnyEvent->timer (after => $linger, cb => sub {
		1462	@linger = ();
		1463	});
		1464	}
1000	}	1465	}
1001		1466
1002	=item AnyEvent::Handle::TLS_CTX	1467	=item AnyEvent::Handle::TLS_CTX
1003		1468
1004	This function creates and returns the Net::SSLeay::CTX object used by	1469	This function creates and returns the Net::SSLeay::CTX object used by
…		…
1046	=over 4	1511	=over 4
1047		1512
1048	=item * all constructor arguments become object members.	1513	=item * all constructor arguments become object members.
1049		1514
1050	At least initially, when you pass a C<tls>-argument to the constructor it	1515	At least initially, when you pass a C<tls>-argument to the constructor it
1051	will end up in C<< $handle->{tls} >>. Those members might be changes or	1516	will end up in C<< $handle->{tls} >>. Those members might be changed or
1052	mutated later on (for example C<tls> will hold the TLS connection object).	1517	mutated later on (for example C<tls> will hold the TLS connection object).
1053		1518
1054	=item * other object member names are prefixed with an C<_>.	1519	=item * other object member names are prefixed with an C<_>.
1055		1520
1056	All object members not explicitly documented (internal use) are prefixed	1521	All object members not explicitly documented (internal use) are prefixed

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.38 by root, Mon May 26 21:28:33 2008 UTC vs. Revision 1.91 by root, Wed Oct 1 07:40:39 2008 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.38 by root, Mon May 26 21:28:33 2008 UTC vs.
Revision 1.91 by root, Wed Oct 1 07:40:39 2008 UTC