ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.44 by root, Thu May 29 00:00:07 2008 UTC vs.
Revision 1.207 by root, Mon Nov 15 22:29:36 2010 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = '0.04';
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes, and other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
		40
54	In the following, when the documentation refers to of "bytes" then this	41	In the following, where the documentation refers to "bytes", it means
55	means characters. As sysread and syswrite are used for all I/O, their	42	characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
57		47
58	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
59	argument.	49	argument.
60		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
		80	sub MAX_READ_SIZE() { 131072 }
		81
61	=head1 METHODS	82	=head1 METHODS
62		83
63	=over 4	84	=over 4
64		85
65	=item B<new (%args)>	86	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
66		87
67	The constructor supports these arguments (all as key => value pairs).	88	The constructor supports these arguments (all as C<< key => value >> pairs).
68		89
69	=over 4	90	=over 4
70		91
71	=item fh => $filehandle [MANDATORY]	92	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		93
73	The filehandle this L<AnyEvent::Handle> object will operate on.	94	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	95	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	96	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		97	that mode.
77		98
78	=item on_eof => $cb->($handle)	99	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
79		100
80	Set the callback to be called on EOF.	101	Try to connect to the specified host and service (port), using
		102	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		103	default C<peername>.
81		104
82	While not mandatory, it is highly recommended to set an eof callback,	105	You have to specify either this parameter, or C<fh>, above.
83	otherwise you might end up with a closed socket while you are still
84	waiting for data.
85		106
		107	It is possible to push requests on the read and write queues, and modify
		108	properties of the stream, even while AnyEvent::Handle is connecting.
		109
		110	When this parameter is specified, then the C<on_prepare>,
		111	C<on_connect_error> and C<on_connect> callbacks will be called under the
		112	appropriate circumstances:
		113
		114	=over 4
		115
86	=item on_error => $cb->($handle)	116	=item on_prepare => $cb->($handle)
87		117
		118	This (rarely used) callback is called before a new connection is
		119	attempted, but after the file handle has been created. It could be used to
		120	prepare the file handle with parameters required for the actual connect
		121	(as opposed to settings that can be changed when the connection is already
		122	established).
		123
		124	The return value of this callback should be the connect timeout value in
		125	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
		126	default timeout is to be used).
		127
		128	=item on_connect => $cb->($handle, $host, $port, $retry->())
		129
		130	This callback is called when a connection has been successfully established.
		131
		132	The peer's numeric host and port (the socket peername) are passed as
		133	parameters, together with a retry callback.
		134
		135	If, for some reason, the handle is not acceptable, calling C<$retry>
		136	will continue with the next connection target (in case of multi-homed
		137	hosts or SRV records there can be multiple connection endpoints). At the
		138	time it is called the read and write queues, eof status, tls status and
		139	similar properties of the handle will have been reset.
		140
		141	In most cases, you should ignore the C<$retry> parameter.
		142
		143	=item on_connect_error => $cb->($handle, $message)
		144
		145	This callback is called when the connection could not be
		146	established. C<$!> will contain the relevant error code, and C<$message> a
		147	message describing it (usually the same as C<"$!">).
		148
		149	If this callback isn't specified, then C<on_error> will be called with a
		150	fatal error instead.
		151
		152	=back
		153
		154	=item on_error => $cb->($handle, $fatal, $message)
		155
88	This is the fatal error callback, that is called when, well, a fatal error	156	This is the error callback, which is called when, well, some error
89	occurs, such as not being able to resolve the hostname, failure to connect	157	occured, such as not being able to resolve the hostname, failure to
90	or a read error.	158	connect, or a read error.
91		159
92	The object will not be in a usable state when this callback has been	160	Some errors are fatal (which is indicated by C<$fatal> being true). On
93	called.	161	fatal errors the handle object will be destroyed (by a call to C<< ->
		162	destroy >>) after invoking the error callback (which means you are free to
		163	examine the handle object). Examples of fatal errors are an EOF condition
		164	with active (but unsatisfiable) read watchers (C<EPIPE>) or I/O errors. In
		165	cases where the other side can close the connection at will, it is
		166	often easiest to not report C<EPIPE> errors in this callback.
94		167
		168	AnyEvent::Handle tries to find an appropriate error code for you to check
		169	against, but in some cases (TLS errors), this does not work well. It is
		170	recommended to always output the C<$message> argument in human-readable
		171	error messages (it's usually the same as C<"$!">).
		172
		173	Non-fatal errors can be retried by returning, but it is recommended
		174	to simply ignore this parameter and instead abondon the handle object
		175	when this callback is invoked. Examples of non-fatal errors are timeouts
		176	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
		177
95	On callback entrance, the value of C<$!> contains the operating system	178	On entry to the callback, the value of C<$!> contains the operating
96	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	179	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
97		180	C<EPROTO>).
98	The callback should throw an exception. If it returns, then
99	AnyEvent::Handle will C<croak> for you.
100		181
101	While not mandatory, it is I<highly> recommended to set this callback, as	182	While not mandatory, it is I<highly> recommended to set this callback, as
102	you will not be notified of errors otherwise. The default simply calls	183	you will not be notified of errors otherwise. The default just calls
103	die.	184	C<croak>.
104		185
105	=item on_read => $cb->($handle)	186	=item on_read => $cb->($handle)
106		187
107	This sets the default read callback, which is called when data arrives	188	This sets the default read callback, which is called when data arrives
108	and no read request is in the queue.	189	and no read request is in the queue (unlike read queue callbacks, this
		190	callback will only be called when at least one octet of data is in the
		191	read buffer).
109		192
110	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	193	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
111	method or access the C<$handle->{rbuf}> member directly.	194	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		195	must not enlarge or modify the read buffer, you can only remove data at
		196	the beginning from it.
112		197
		198	You can also call C<< ->push_read (...) >> or any other function that
		199	modifies the read queue. Or do both. Or ...
		200
113	When an EOF condition is detected then AnyEvent::Handle will first try to	201	When an EOF condition is detected, AnyEvent::Handle will first try to
114	feed all the remaining data to the queued callbacks and C<on_read> before	202	feed all the remaining data to the queued callbacks and C<on_read> before
115	calling the C<on_eof> callback. If no progress can be made, then a fatal	203	calling the C<on_eof> callback. If no progress can be made, then a fatal
116	error will be raised (with C<$!> set to C<EPIPE>).	204	error will be raised (with C<$!> set to C<EPIPE>).
117		205
		206	Note that, unlike requests in the read queue, an C<on_read> callback
		207	doesn't mean you I<require> some data: if there is an EOF and there
		208	are outstanding read requests then an error will be flagged. With an
		209	C<on_read> callback, the C<on_eof> callback will be invoked.
		210
		211	=item on_eof => $cb->($handle)
		212
		213	Set the callback to be called when an end-of-file condition is detected,
		214	i.e. in the case of a socket, when the other side has closed the
		215	connection cleanly, and there are no outstanding read requests in the
		216	queue (if there are read requests, then an EOF counts as an unexpected
		217	connection close and will be flagged as an error).
		218
		219	For sockets, this just means that the other side has stopped sending data,
		220	you can still try to write data, and, in fact, one can return from the EOF
		221	callback and continue writing data, as only the read part has been shut
		222	down.
		223
		224	If an EOF condition has been detected but no C<on_eof> callback has been
		225	set, then a fatal error will be raised with C<$!> set to <0>.
		226
118	=item on_drain => $cb->($handle)	227	=item on_drain => $cb->($handle)
119		228
120	This sets the callback that is called when the write buffer becomes empty	229	This sets the callback that is called when the write buffer becomes empty
121	(or when the callback is set and the buffer is empty already).	230	(or immediately if the buffer is empty already).
122		231
123	To append to the write buffer, use the C<< ->push_write >> method.	232	To append to the write buffer, use the C<< ->push_write >> method.
124		233
		234	This callback is useful when you don't want to put all of your write data
		235	into the queue at once, for example, when you want to write the contents
		236	of some file to the socket you might not want to read the whole file into
		237	memory and push it into the queue, but instead only read more data from
		238	the file when the write queue becomes empty.
		239
125	=item timeout => $fractional_seconds	240	=item timeout => $fractional_seconds
126		241
		242	=item rtimeout => $fractional_seconds
		243
		244	=item wtimeout => $fractional_seconds
		245
127	If non-zero, then this enables an "inactivity" timeout: whenever this many	246	If non-zero, then these enables an "inactivity" timeout: whenever this
128	seconds pass without a successful read or write on the underlying file	247	many seconds pass without a successful read or write on the underlying
129	handle, the C<on_timeout> callback will be invoked (and if that one is	248	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
130	missing, an C<ETIMEDOUT> errror will be raised).	249	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		250	error will be raised).
131		251
		252	There are three variants of the timeouts that work independently
		253	of each other, for both read and write, just read, and just write:
		254	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		255	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		256	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		257
132	Note that timeout processing is also active when you currently do not have	258	Note that timeout processing is active even when you do not have
133	any outstanding read or write requests: If you plan to keep the connection	259	any outstanding read or write requests: If you plan to keep the connection
134	idle then you should disable the timout temporarily or ignore the timeout	260	idle then you should disable the timeout temporarily or ignore the timeout
135	in the C<on_timeout> callback.	261	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		262	restart the timeout.
136		263
137	Zero (the default) disables this timeout.	264	Zero (the default) disables this timeout.
138		265
139	=item on_timeout => $cb->($handle)	266	=item on_timeout => $cb->($handle)
140		267
…		…
144		271
145	=item rbuf_max => <bytes>	272	=item rbuf_max => <bytes>
146		273
147	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	274	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
148	when the read buffer ever (strictly) exceeds this size. This is useful to	275	when the read buffer ever (strictly) exceeds this size. This is useful to
149	avoid denial-of-service attacks.	276	avoid some forms of denial-of-service attacks.
150		277
151	For example, a server accepting connections from untrusted sources should	278	For example, a server accepting connections from untrusted sources should
152	be configured to accept only so-and-so much data that it cannot act on	279	be configured to accept only so-and-so much data that it cannot act on
153	(for example, when expecting a line, an attacker could send an unlimited	280	(for example, when expecting a line, an attacker could send an unlimited
154	amount of data without a callback ever being called as long as the line	281	amount of data without a callback ever being called as long as the line
155	isn't finished).	282	isn't finished).
156		283
		284	=item autocork => <boolean>
		285
		286	When disabled (the default), C<push_write> will try to immediately
		287	write the data to the handle if possible. This avoids having to register
		288	a write watcher and wait for the next event loop iteration, but can
		289	be inefficient if you write multiple small chunks (on the wire, this
		290	disadvantage is usually avoided by your kernel's nagle algorithm, see
		291	C<no_delay>, but this option can save costly syscalls).
		292
		293	When enabled, writes will always be queued till the next event loop
		294	iteration. This is efficient when you do many small writes per iteration,
		295	but less efficient when you do a single write only per iteration (or when
		296	the write buffer often is full). It also increases write latency.
		297
		298	=item no_delay => <boolean>
		299
		300	When doing small writes on sockets, your operating system kernel might
		301	wait a bit for more data before actually sending it out. This is called
		302	the Nagle algorithm, and usually it is beneficial.
		303
		304	In some situations you want as low a delay as possible, which can be
		305	accomplishd by setting this option to a true value.
		306
		307	The default is your operating system's default behaviour (most likely
		308	enabled). This option explicitly enables or disables it, if possible.
		309
		310	=item keepalive => <boolean>
		311
		312	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		313	normally, TCP connections have no time-out once established, so TCP
		314	connections, once established, can stay alive forever even when the other
		315	side has long gone. TCP keepalives are a cheap way to take down long-lived
		316	TCP connections when the other side becomes unreachable. While the default
		317	is OS-dependent, TCP keepalives usually kick in after around two hours,
		318	and, if the other side doesn't reply, take down the TCP connection some 10
		319	to 15 minutes later.
		320
		321	It is harmless to specify this option for file handles that do not support
		322	keepalives, and enabling it on connections that are potentially long-lived
		323	is usually a good idea.
		324
		325	=item oobinline => <boolean>
		326
		327	BSD majorly fucked up the implementation of TCP urgent data. The result
		328	is that almost no OS implements TCP according to the specs, and every OS
		329	implements it slightly differently.
		330
		331	If you want to handle TCP urgent data, then setting this flag (the default
		332	is enabled) gives you the most portable way of getting urgent data, by
		333	putting it into the stream.
		334
		335	Since BSD emulation of OOB data on top of TCP's urgent data can have
		336	security implications, AnyEvent::Handle sets this flag automatically
		337	unless explicitly specified. Note that setting this flag after
		338	establishing a connection I<may> be a bit too late (data loss could
		339	already have occured on BSD systems), but at least it will protect you
		340	from most attacks.
		341
157	=item read_size => <bytes>	342	=item read_size => <bytes>
158		343
159	The default read block size (the amount of bytes this module will try to read	344	The initial read block size, the number of bytes this module will try to
160	on each [loop iteration). Default: C<4096>.	345	read during each loop iteration. Each handle object will consume at least
		346	this amount of memory for the read buffer as well, so when handling many
		347	connections requirements). See also C<max_read_size>. Default: C<2048>.
		348
		349	=item max_read_size => <bytes>
		350
		351	The maximum read buffer size used by the dynamic adjustment
		352	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		353	one go it will double C<read_size> up to the maximum given by this
		354	option. Default: C<131072> or C<read_size>, whichever is higher.
161		355
162	=item low_water_mark => <bytes>	356	=item low_water_mark => <bytes>
163		357
164	Sets the amount of bytes (default: C<0>) that make up an "empty" write	358	Sets the number of bytes (default: C<0>) that make up an "empty" write
165	buffer: If the write reaches this size or gets even samller it is	359	buffer: If the buffer reaches this size or gets even samller it is
166	considered empty.	360	considered empty.
167		361
		362	Sometimes it can be beneficial (for performance reasons) to add data to
		363	the write buffer before it is fully drained, but this is a rare case, as
		364	the operating system kernel usually buffers data as well, so the default
		365	is good in almost all cases.
		366
		367	=item linger => <seconds>
		368
		369	If this is non-zero (default: C<3600>), the destructor of the
		370	AnyEvent::Handle object will check whether there is still outstanding
		371	write data and will install a watcher that will write this data to the
		372	socket. No errors will be reported (this mostly matches how the operating
		373	system treats outstanding data at socket close time).
		374
		375	This will not work for partial TLS data that could not be encoded
		376	yet. This data will be lost. Calling the C<stoptls> method in time might
		377	help.
		378
		379	=item peername => $string
		380
		381	A string used to identify the remote site - usually the DNS hostname
		382	(I<not> IDN!) used to create the connection, rarely the IP address.
		383
		384	Apart from being useful in error messages, this string is also used in TLS
		385	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		386	verification will be skipped when C<peername> is not specified or is
		387	C<undef>.
		388
168	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	389	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
169		390
170	When this parameter is given, it enables TLS (SSL) mode, that means it	391	When this parameter is given, it enables TLS (SSL) mode, that means
171	will start making tls handshake and will transparently encrypt/decrypt	392	AnyEvent will start a TLS handshake as soon as the connection has been
172	data.	393	established and will transparently encrypt/decrypt data afterwards.
		394
		395	All TLS protocol errors will be signalled as C<EPROTO>, with an
		396	appropriate error message.
173		397
174	TLS mode requires Net::SSLeay to be installed (it will be loaded	398	TLS mode requires Net::SSLeay to be installed (it will be loaded
175	automatically when you try to create a TLS handle).	399	automatically when you try to create a TLS handle): this module doesn't
		400	have a dependency on that module, so if your module requires it, you have
		401	to add the dependency yourself.
176		402
177	For the TLS server side, use C<accept>, and for the TLS client side of a	403	Unlike TCP, TLS has a server and client side: for the TLS server side, use
178	connection, use C<connect> mode.	404	C<accept>, and for the TLS client side of a connection, use C<connect>
		405	mode.
179		406
180	You can also provide your own TLS connection object, but you have	407	You can also provide your own TLS connection object, but you have
181	to make sure that you call either C<Net::SSLeay::set_connect_state>	408	to make sure that you call either C<Net::SSLeay::set_connect_state>
182	or C<Net::SSLeay::set_accept_state> on it before you pass it to	409	or C<Net::SSLeay::set_accept_state> on it before you pass it to
183	AnyEvent::Handle.	410	AnyEvent::Handle. Also, this module will take ownership of this connection
		411	object.
184		412
		413	At some future point, AnyEvent::Handle might switch to another TLS
		414	implementation, then the option to use your own session object will go
		415	away.
		416
		417	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		418	passing in the wrong integer will lead to certain crash. This most often
		419	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		420	segmentation fault.
		421
185	See the C<starttls> method if you need to start TLs negotiation later.	422	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
186		423
187	=item tls_ctx => $ssl_ctx	424	=item tls_ctx => $anyevent_tls
188		425
189	Use the given Net::SSLeay::CTX object to create the new TLS connection	426	Use the given C<AnyEvent::TLS> object to create the new TLS connection
190	(unless a connection object was specified directly). If this parameter is	427	(unless a connection object was specified directly). If this
191	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	428	parameter is missing (or C<undef>), then AnyEvent::Handle will use
		429	C<AnyEvent::Handle::TLS_CTX>.
		430
		431	Instead of an object, you can also specify a hash reference with C<< key
		432	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		433	new TLS context object.
		434
		435	=item on_starttls => $cb->($handle, $success[, $error_message])
		436
		437	This callback will be invoked when the TLS/SSL handshake has finished. If
		438	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		439	(C<on_stoptls> will not be called in this case).
		440
		441	The session in C<< $handle->{tls} >> can still be examined in this
		442	callback, even when the handshake was not successful.
		443
		444	TLS handshake failures will not cause C<on_error> to be invoked when this
		445	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		446
		447	Without this callback, handshake failures lead to C<on_error> being
		448	called as usual.
		449
		450	Note that you cannot just call C<starttls> again in this callback. If you
		451	need to do that, start an zero-second timer instead whose callback can
		452	then call C<< ->starttls >> again.
		453
		454	=item on_stoptls => $cb->($handle)
		455
		456	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		457	set, then it will be invoked after freeing the TLS session. If it is not,
		458	then a TLS shutdown condition will be treated like a normal EOF condition
		459	on the handle.
		460
		461	The session in C<< $handle->{tls} >> can still be examined in this
		462	callback.
		463
		464	This callback will only be called on TLS shutdowns, not when the
		465	underlying handle signals EOF.
192		466
193	=item json => JSON or JSON::XS object	467	=item json => JSON or JSON::XS object
194		468
195	This is the json coder object used by the C<json> read and write types.	469	This is the json coder object used by the C<json> read and write types.
196		470
197	If you don't supply it, then AnyEvent::Handle will create and use a	471	If you don't supply it, then AnyEvent::Handle will create and use a
198	suitable one, which will write and expect UTF-8 encoded JSON texts.	472	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		473	texts.
199		474
200	Note that you are responsible to depend on the JSON module if you want to	475	Note that you are responsible to depend on the JSON module if you want to
201	use this functionality, as AnyEvent does not have a dependency itself.	476	use this functionality, as AnyEvent does not have a dependency itself.
202		477
203	=item filter_r => $cb
204
205	=item filter_w => $cb
206
207	These exist, but are undocumented at this time.
208
209	=back	478	=back
210		479
211	=cut	480	=cut
212		481
213	sub new {	482	sub new {
214	my $class = shift;	483	my $class = shift;
215
216	my $self = bless { @_ }, $class;	484	my $self = bless { @_ }, $class;
217		485
218	$self->{fh} or Carp::croak "mandatory argument fh is missing";	486	if ($self->{fh}) {
		487	$self->_start;
		488	return unless $self->{fh}; # could be gone by now
		489
		490	} elsif ($self->{connect}) {
		491	require AnyEvent::Socket;
		492
		493	$self->{peername} = $self->{connect}[0]
		494	unless exists $self->{peername};
		495
		496	$self->{_skip_drain_rbuf} = 1;
		497
		498	{
		499	Scalar::Util::weaken (my $self = $self);
		500
		501	$self->{_connect} =
		502	AnyEvent::Socket::tcp_connect (
		503	$self->{connect}[0],
		504	$self->{connect}[1],
		505	sub {
		506	my ($fh, $host, $port, $retry) = @_;
		507
		508	delete $self->{_connect}; # no longer needed
		509
		510	if ($fh) {
		511	$self->{fh} = $fh;
		512
		513	delete $self->{_skip_drain_rbuf};
		514	$self->_start;
		515
		516	$self->{on_connect}
		517	and $self->{on_connect}($self, $host, $port, sub {
		518	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		519	$self->{_skip_drain_rbuf} = 1;
		520	&$retry;
		521	});
		522
		523	} else {
		524	if ($self->{on_connect_error}) {
		525	$self->{on_connect_error}($self, "$!");
		526	$self->destroy;
		527	} else {
		528	$self->_error ($!, 1);
		529	}
		530	}
		531	},
		532	sub {
		533	local $self->{fh} = $_[0];
		534
		535	$self->{on_prepare}
		536	? $self->{on_prepare}->($self)
		537	: ()
		538	}
		539	);
		540	}
		541
		542	} else {
		543	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		544	}
		545
		546	$self
		547	}
		548
		549	sub _start {
		550	my ($self) = @_;
		551
		552	# too many clueless people try to use udp and similar sockets
		553	# with AnyEvent::Handle, do them a favour.
		554	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		555	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		556	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
219		557
220	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	558	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
221		559
222	if ($self->{tls}) {	560	$self->{_activity} =
223	require Net::SSLeay;	561	$self->{_ractivity} =
		562	$self->{_wactivity} = AE::now;
		563
		564	$self->{read_size} ||= 2048;
		565	$self->{max_read_size} = $self->{read_size}
		566	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		567
		568	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		569	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		570	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		571
		572	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		573	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		574
		575	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		576
224	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	577	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
225	}	578	if $self->{tls};
226		579
227	# $self->on_eof (delete $self->{on_eof} ) if $self->{on_eof}; # nop
228	# $self->on_error (delete $self->{on_error}) if $self->{on_error}; # nop
229	# $self->on_read (delete $self->{on_read} ) if $self->{on_read}; # nop
230	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	580	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
231		581
232	$self->{_activity} = AnyEvent->now;
233	$self->_timeout;
234
235	$self->start_read;	582	$self->start_read
		583	if $self->{on_read} || @{ $self->{_queue} };
236		584
237	$self	585	$self->_drain_wbuf;
238	}	586	}
239		587
240	sub _shutdown {
241	my ($self) = @_;
242
243	delete $self->{_rw};
244	delete $self->{_ww};
245	delete $self->{fh};
246	}
247
248	sub error {	588	sub _error {
249	my ($self) = @_;	589	my ($self, $errno, $fatal, $message) = @_;
250		590
251	{	591	$! = $errno;
252	local $!;	592	$message ||= "$!";
253	$self->_shutdown;
254	}
255		593
256	$self->{on_error}($self)
257	if $self->{on_error};	594	if ($self->{on_error}) {
258		595	$self->{on_error}($self, $fatal, $message);
		596	$self->destroy if $fatal;
		597	} elsif ($self->{fh} || $self->{connect}) {
		598	$self->destroy;
259	Carp::croak "AnyEvent::Handle uncaught fatal error: $!";	599	Carp::croak "AnyEvent::Handle uncaught error: $message";
		600	}
260	}	601	}
261		602
262	=item $fh = $handle->fh	603	=item $fh = $handle->fh
263		604
264	This method returns the file handle of the L<AnyEvent::Handle> object.	605	This method returns the file handle used to create the L<AnyEvent::Handle> object.
265		606
266	=cut	607	=cut
267		608
268	sub fh { $_[0]{fh} }	609	sub fh { $_[0]{fh} }
269		610
…		…
287	$_[0]{on_eof} = $_[1];	628	$_[0]{on_eof} = $_[1];
288	}	629	}
289		630
290	=item $handle->on_timeout ($cb)	631	=item $handle->on_timeout ($cb)
291		632
292	Replace the current C<on_timeout> callback, or disables the callback	633	=item $handle->on_rtimeout ($cb)
293	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
294	argument.
295		634
296	=cut	635	=item $handle->on_wtimeout ($cb)
297		636
		637	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
		638	callback, or disables the callback (but not the timeout) if C<$cb> =
		639	C<undef>. See the C<timeout> constructor argument and method.
		640
		641	=cut
		642
		643	# see below
		644
		645	=item $handle->autocork ($boolean)
		646
		647	Enables or disables the current autocork behaviour (see C<autocork>
		648	constructor argument). Changes will only take effect on the next write.
		649
		650	=cut
		651
		652	sub autocork {
		653	$_[0]{autocork} = $_[1];
		654	}
		655
		656	=item $handle->no_delay ($boolean)
		657
		658	Enables or disables the C<no_delay> setting (see constructor argument of
		659	the same name for details).
		660
		661	=cut
		662
		663	sub no_delay {
		664	$_[0]{no_delay} = $_[1];
		665
		666	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		667	if $_[0]{fh};
		668	}
		669
		670	=item $handle->keepalive ($boolean)
		671
		672	Enables or disables the C<keepalive> setting (see constructor argument of
		673	the same name for details).
		674
		675	=cut
		676
		677	sub keepalive {
		678	$_[0]{keepalive} = $_[1];
		679
		680	eval {
		681	local $SIG{__DIE__};
		682	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		683	if $_[0]{fh};
		684	};
		685	}
		686
		687	=item $handle->oobinline ($boolean)
		688
		689	Enables or disables the C<oobinline> setting (see constructor argument of
		690	the same name for details).
		691
		692	=cut
		693
		694	sub oobinline {
		695	$_[0]{oobinline} = $_[1];
		696
		697	eval {
		698	local $SIG{__DIE__};
		699	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		700	if $_[0]{fh};
		701	};
		702	}
		703
		704	=item $handle->keepalive ($boolean)
		705
		706	Enables or disables the C<keepalive> setting (see constructor argument of
		707	the same name for details).
		708
		709	=cut
		710
		711	sub keepalive {
		712	$_[0]{keepalive} = $_[1];
		713
		714	eval {
		715	local $SIG{__DIE__};
		716	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		717	if $_[0]{fh};
		718	};
		719	}
		720
		721	=item $handle->on_starttls ($cb)
		722
		723	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		724
		725	=cut
		726
		727	sub on_starttls {
		728	$_[0]{on_starttls} = $_[1];
		729	}
		730
		731	=item $handle->on_stoptls ($cb)
		732
		733	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		734
		735	=cut
		736
298	sub on_timeout {	737	sub on_stoptls {
299	$_[0]{on_timeout} = $_[1];	738	$_[0]{on_stoptls} = $_[1];
		739	}
		740
		741	=item $handle->rbuf_max ($max_octets)
		742
		743	Configures the C<rbuf_max> setting (C<undef> disables it).
		744
		745	=cut
		746
		747	sub rbuf_max {
		748	$_[0]{rbuf_max} = $_[1];
300	}	749	}
301		750
302	#############################################################################	751	#############################################################################
303		752
304	=item $handle->timeout ($seconds)	753	=item $handle->timeout ($seconds)
305		754
		755	=item $handle->rtimeout ($seconds)
		756
		757	=item $handle->wtimeout ($seconds)
		758
306	Configures (or disables) the inactivity timeout.	759	Configures (or disables) the inactivity timeout.
307		760
308	=cut	761	=item $handle->timeout_reset
309		762
310	sub timeout {	763	=item $handle->rtimeout_reset
		764
		765	=item $handle->wtimeout_reset
		766
		767	Reset the activity timeout, as if data was received or sent.
		768
		769	These methods are cheap to call.
		770
		771	=cut
		772
		773	for my $dir ("", "r", "w") {
		774	my $timeout = "${dir}timeout";
		775	my $tw = "_${dir}tw";
		776	my $on_timeout = "on_${dir}timeout";
		777	my $activity = "_${dir}activity";
		778	my $cb;
		779
		780	*$on_timeout = sub {
		781	$_[0]{$on_timeout} = $_[1];
		782	};
		783
		784	*$timeout = sub {
311	my ($self, $timeout) = @_;	785	my ($self, $new_value) = @_;
312		786
		787	$new_value >= 0
		788	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		789
313	$self->{timeout} = $timeout;	790	$self->{$timeout} = $new_value;
314	$self->_timeout;	791	delete $self->{$tw}; &$cb;
315	}	792	};
316		793
		794	*{"${dir}timeout_reset"} = sub {
		795	$_[0]{$activity} = AE::now;
		796	};
		797
		798	# main workhorse:
317	# reset the timeout watcher, as neccessary	799	# reset the timeout watcher, as neccessary
318	# also check for time-outs	800	# also check for time-outs
319	sub _timeout {	801	$cb = sub {
320	my ($self) = @_;	802	my ($self) = @_;
321		803
322	if ($self->{timeout}) {	804	if ($self->{$timeout} && $self->{fh}) {
323	my $NOW = AnyEvent->now;	805	my $NOW = AE::now;
324		806
325	# when would the timeout trigger?	807	# when would the timeout trigger?
326	my $after = $self->{_activity} + $self->{timeout} - $NOW;	808	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
327		809
328	# now or in the past already?	810	# now or in the past already?
329	if ($after <= 0) {	811	if ($after <= 0) {
330	$self->{_activity} = $NOW;	812	$self->{$activity} = $NOW;
331		813
332	if ($self->{on_timeout}) {	814	if ($self->{$on_timeout}) {
333	$self->{on_timeout}->($self);	815	$self->{$on_timeout}($self);
334	} else {	816	} else {
335	$! = Errno::ETIMEDOUT;	817	$self->_error (Errno::ETIMEDOUT);
336	$self->error;	818	}
		819
		820	# callback could have changed timeout value, optimise
		821	return unless $self->{$timeout};
		822
		823	# calculate new after
		824	$after = $self->{$timeout};
337	}	825	}
338		826
339	# callbakx could have changed timeout value, optimise	827	Scalar::Util::weaken $self;
340	return unless $self->{timeout};	828	return unless $self; # ->error could have destroyed $self
341		829
342	# calculate new after	830	$self->{$tw} ||= AE::timer $after, 0, sub {
343	$after = $self->{timeout};	831	delete $self->{$tw};
		832	$cb->($self);
		833	};
		834	} else {
		835	delete $self->{$tw};
344	}	836	}
345
346	Scalar::Util::weaken $self;
347
348	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
349	delete $self->{_tw};
350	$self->_timeout;
351	});
352	} else {
353	delete $self->{_tw};
354	}	837	}
355	}	838	}
356		839
357	#############################################################################	840	#############################################################################
358		841
…		…
374	=item $handle->on_drain ($cb)	857	=item $handle->on_drain ($cb)
375		858
376	Sets the C<on_drain> callback or clears it (see the description of	859	Sets the C<on_drain> callback or clears it (see the description of
377	C<on_drain> in the constructor).	860	C<on_drain> in the constructor).
378		861
		862	This method may invoke callbacks (and therefore the handle might be
		863	destroyed after it returns).
		864
379	=cut	865	=cut
380		866
381	sub on_drain {	867	sub on_drain {
382	my ($self, $cb) = @_;	868	my ($self, $cb) = @_;
383		869
384	$self->{on_drain} = $cb;	870	$self->{on_drain} = $cb;
385		871
386	$cb->($self)	872	$cb->($self)
387	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	873	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
388	}	874	}
389		875
390	=item $handle->push_write ($data)	876	=item $handle->push_write ($data)
391		877
392	Queues the given scalar to be written. You can push as much data as you	878	Queues the given scalar to be written. You can push as much data as you
393	want (only limited by the available memory), as C<AnyEvent::Handle>	879	want (only limited by the available memory), as C<AnyEvent::Handle>
394	buffers it independently of the kernel.	880	buffers it independently of the kernel.
395		881
		882	This method may invoke callbacks (and therefore the handle might be
		883	destroyed after it returns).
		884
396	=cut	885	=cut
397		886
398	sub _drain_wbuf {	887	sub _drain_wbuf {
399	my ($self) = @_;	888	my ($self) = @_;
400		889
…		…
403	Scalar::Util::weaken $self;	892	Scalar::Util::weaken $self;
404		893
405	my $cb = sub {	894	my $cb = sub {
406	my $len = syswrite $self->{fh}, $self->{wbuf};	895	my $len = syswrite $self->{fh}, $self->{wbuf};
407		896
408	if ($len >= 0) {	897	if (defined $len) {
409	substr $self->{wbuf}, 0, $len, "";	898	substr $self->{wbuf}, 0, $len, "";
410		899
411	$self->{_activity} = AnyEvent->now;	900	$self->{_activity} = $self->{_wactivity} = AE::now;
412		901
413	$self->{on_drain}($self)	902	$self->{on_drain}($self)
414	if $self->{low_water_mark} >= length $self->{wbuf}	903	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
415	&& $self->{on_drain};	904	&& $self->{on_drain};
416		905
417	delete $self->{_ww} unless length $self->{wbuf};	906	delete $self->{_ww} unless length $self->{wbuf};
418	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	907	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
419	$self->error;	908	$self->_error ($!, 1);
420	}	909	}
421	};	910	};
422		911
423	# try to write data immediately	912	# try to write data immediately
424	$cb->();	913	$cb->() unless $self->{autocork};
425		914
426	# if still data left in wbuf, we need to poll	915	# if still data left in wbuf, we need to poll
427	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	916	$self->{_ww} = AE::io $self->{fh}, 1, $cb
428	if length $self->{wbuf};	917	if length $self->{wbuf};
429	};	918	};
430	}	919	}
431		920
432	our %WH;	921	our %WH;
433		922
		923	# deprecated
434	sub register_write_type($$) {	924	sub register_write_type($$) {
435	$WH{$_[0]} = $_[1];	925	$WH{$_[0]} = $_[1];
436	}	926	}
437		927
438	sub push_write {	928	sub push_write {
439	my $self = shift;	929	my $self = shift;
440		930
441	if (@_ > 1) {	931	if (@_ > 1) {
442	my $type = shift;	932	my $type = shift;
443		933
		934	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
444	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	935	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
445	->($self, @_);	936	->($self, @_);
446	}	937	}
447		938
		939	# we downgrade here to avoid hard-to-track-down bugs,
		940	# and diagnose the problem earlier and better.
		941
448	if ($self->{filter_w}) {	942	if ($self->{tls}) {
449	$self->{filter_w}->($self, \$_[0]);	943	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
		944	&_dotls ($self) if $self->{fh};
450	} else {	945	} else {
451	$self->{wbuf} .= $_[0];	946	utf8::downgrade $self->{wbuf} .= $_[0];
452	$self->_drain_wbuf;	947	$self->_drain_wbuf if $self->{fh};
453	}	948	}
454	}	949	}
455		950
456	=item $handle->push_write (type => @args)	951	=item $handle->push_write (type => @args)
457		952
458	=item $handle->unshift_write (type => @args)
459
460	Instead of formatting your data yourself, you can also let this module do	953	Instead of formatting your data yourself, you can also let this module
461	the job by specifying a type and type-specific arguments.	954	do the job by specifying a type and type-specific arguments. You
		955	can also specify the (fully qualified) name of a package, in which
		956	case AnyEvent tries to load the package and then expects to find the
		957	C<anyevent_write_type> function inside (see "custom write types", below).
462		958
463	Predefined types are (if you have ideas for additional types, feel free to	959	Predefined types are (if you have ideas for additional types, feel free to
464	drop by and tell us):	960	drop by and tell us):
465		961
466	=over 4	962	=over 4
…		…
468	=item netstring => $string	964	=item netstring => $string
469		965
470	Formats the given value as netstring	966	Formats the given value as netstring
471	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).	967	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).
472		968
473	=back
474
475	=cut	969	=cut
476		970
477	register_write_type netstring => sub {	971	register_write_type netstring => sub {
478	my ($self, $string) = @_;	972	my ($self, $string) = @_;
479		973
480	sprintf "%d:%s,", (length $string), $string	974	(length $string) . ":$string,"
		975	};
		976
		977	=item packstring => $format, $data
		978
		979	An octet string prefixed with an encoded length. The encoding C<$format>
		980	uses the same format as a Perl C<pack> format, but must specify a single
		981	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		982	optional C<!>, C<< < >> or C<< > >> modifier).
		983
		984	=cut
		985
		986	register_write_type packstring => sub {
		987	my ($self, $format, $string) = @_;
		988
		989	pack "$format/a*", $string
481	};	990	};
482		991
483	=item json => $array_or_hashref	992	=item json => $array_or_hashref
484		993
485	Encodes the given hash or array reference into a JSON object. Unless you	994	Encodes the given hash or array reference into a JSON object. Unless you
…		…
510	Other languages could read single lines terminated by a newline and pass	1019	Other languages could read single lines terminated by a newline and pass
511	this line into their JSON decoder of choice.	1020	this line into their JSON decoder of choice.
512		1021
513	=cut	1022	=cut
514		1023
		1024	sub json_coder() {
		1025	eval { require JSON::XS; JSON::XS->new->utf8 }
		1026	|| do { require JSON; JSON->new->utf8 }
		1027	}
		1028
515	register_write_type json => sub {	1029	register_write_type json => sub {
516	my ($self, $ref) = @_;	1030	my ($self, $ref) = @_;
517		1031
518	require JSON;	1032	my $json = $self->{json} ||= json_coder;
519		1033
520	$self->{json} ? $self->{json}->encode ($ref)	1034	$json->encode ($ref)
521	: JSON::encode_json ($ref)
522	};	1035	};
523		1036
524	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1037	=item storable => $reference
525		1038
526	This function (not method) lets you add your own types to C<push_write>.	1039	Freezes the given reference using L<Storable> and writes it to the
		1040	handle. Uses the C<nfreeze> format.
		1041
		1042	=cut
		1043
		1044	register_write_type storable => sub {
		1045	my ($self, $ref) = @_;
		1046
		1047	require Storable;
		1048
		1049	pack "w/a*", Storable::nfreeze ($ref)
		1050	};
		1051
		1052	=back
		1053
		1054	=item $handle->push_shutdown
		1055
		1056	Sometimes you know you want to close the socket after writing your data
		1057	before it was actually written. One way to do that is to replace your
		1058	C<on_drain> handler by a callback that shuts down the socket (and set
		1059	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1060	replaces the C<on_drain> callback with:
		1061
		1062	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1063
		1064	This simply shuts down the write side and signals an EOF condition to the
		1065	the peer.
		1066
		1067	You can rely on the normal read queue and C<on_eof> handling
		1068	afterwards. This is the cleanest way to close a connection.
		1069
		1070	This method may invoke callbacks (and therefore the handle might be
		1071	destroyed after it returns).
		1072
		1073	=cut
		1074
		1075	sub push_shutdown {
		1076	my ($self) = @_;
		1077
		1078	delete $self->{low_water_mark};
		1079	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1080	}
		1081
		1082	=item custom write types - Package::anyevent_write_type $handle, @args
		1083
		1084	Instead of one of the predefined types, you can also specify the name of
		1085	a package. AnyEvent will try to load the package and then expects to find
		1086	a function named C<anyevent_write_type> inside. If it isn't found, it
		1087	progressively tries to load the parent package until it either finds the
		1088	function (good) or runs out of packages (bad).
		1089
527	Whenever the given C<type> is used, C<push_write> will invoke the code	1090	Whenever the given C<type> is used, C<push_write> will the function with
528	reference with the handle object and the remaining arguments.	1091	the handle object and the remaining arguments.
529		1092
530	The code reference is supposed to return a single octet string that will	1093	The function is supposed to return a single octet string that will be
531	be appended to the write buffer.	1094	appended to the write buffer, so you cna mentally treat this function as a
		1095	"arguments to on-the-wire-format" converter.
532		1096
533	Note that this is a function, and all types registered this way will be	1097	Example: implement a custom write type C<join> that joins the remaining
534	global, so try to use unique names.	1098	arguments using the first one.
		1099
		1100	$handle->push_write (My::Type => " ", 1,2,3);
		1101
		1102	# uses the following package, which can be defined in the "My::Type" or in
		1103	# the "My" modules to be auto-loaded, or just about anywhere when the
		1104	# My::Type::anyevent_write_type is defined before invoking it.
		1105
		1106	package My::Type;
		1107
		1108	sub anyevent_write_type {
		1109	my ($handle, $delim, @args) = @_;
		1110
		1111	join $delim, @args
		1112	}
535		1113
536	=cut	1114	=cut
537		1115
538	#############################################################################	1116	#############################################################################
539		1117
…		…
548	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1126	ways, the "simple" way, using only C<on_read> and the "complex" way, using
549	a queue.	1127	a queue.
550		1128
551	In the simple case, you just install an C<on_read> callback and whenever	1129	In the simple case, you just install an C<on_read> callback and whenever
552	new data arrives, it will be called. You can then remove some data (if	1130	new data arrives, it will be called. You can then remove some data (if
553	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	1131	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
554	or not.	1132	leave the data there if you want to accumulate more (e.g. when only a
		1133	partial message has been received so far), or change the read queue with
		1134	e.g. C<push_read>.
555		1135
556	In the more complex case, you want to queue multiple callbacks. In this	1136	In the more complex case, you want to queue multiple callbacks. In this
557	case, AnyEvent::Handle will call the first queued callback each time new	1137	case, AnyEvent::Handle will call the first queued callback each time new
558	data arrives and removes it when it has done its job (see C<push_read>,	1138	data arrives (also the first time it is queued) and remove it when it has
559	below).	1139	done its job (see C<push_read>, below).
560		1140
561	This way you can, for example, push three line-reads, followed by reading	1141	This way you can, for example, push three line-reads, followed by reading
562	a chunk of data, and AnyEvent::Handle will execute them in order.	1142	a chunk of data, and AnyEvent::Handle will execute them in order.
563		1143
564	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	1144	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
565	the specified number of bytes which give an XML datagram.	1145	the specified number of bytes which give an XML datagram.
566		1146
567	# in the default state, expect some header bytes	1147	# in the default state, expect some header bytes
568	$handle->on_read (sub {	1148	$handle->on_read (sub {
569	# some data is here, now queue the length-header-read (4 octets)	1149	# some data is here, now queue the length-header-read (4 octets)
570	shift->unshift_read_chunk (4, sub {	1150	shift->unshift_read (chunk => 4, sub {
571	# header arrived, decode	1151	# header arrived, decode
572	my $len = unpack "N", $_[1];	1152	my $len = unpack "N", $_[1];
573		1153
574	# now read the payload	1154	# now read the payload
575	shift->unshift_read_chunk ($len, sub {	1155	shift->unshift_read (chunk => $len, sub {
576	my $xml = $_[1];	1156	my $xml = $_[1];
577	# handle xml	1157	# handle xml
578	});	1158	});
579	});	1159	});
580	});	1160	});
581		1161
582	Example 2: Implement a client for a protocol that replies either with	1162	Example 2: Implement a client for a protocol that replies either with "OK"
583	"OK" and another line or "ERROR" for one request, and 64 bytes for the	1163	and another line or "ERROR" for the first request that is sent, and 64
584	second request. Due tot he availability of a full queue, we can just	1164	bytes for the second request. Due to the availability of a queue, we can
585	pipeline sending both requests and manipulate the queue as necessary in	1165	just pipeline sending both requests and manipulate the queue as necessary
586	the callbacks:	1166	in the callbacks.
587		1167
588	# request one	1168	When the first callback is called and sees an "OK" response, it will
		1169	C<unshift> another line-read. This line-read will be queued I<before> the
		1170	64-byte chunk callback.
		1171
		1172	# request one, returns either "OK + extra line" or "ERROR"
589	$handle->push_write ("request 1\015\012");	1173	$handle->push_write ("request 1\015\012");
590		1174
591	# we expect "ERROR" or "OK" as response, so push a line read	1175	# we expect "ERROR" or "OK" as response, so push a line read
592	$handle->push_read_line (sub {	1176	$handle->push_read (line => sub {
593	# if we got an "OK", we have to _prepend_ another line,	1177	# if we got an "OK", we have to _prepend_ another line,
594	# so it will be read before the second request reads its 64 bytes	1178	# so it will be read before the second request reads its 64 bytes
595	# which are already in the queue when this callback is called	1179	# which are already in the queue when this callback is called
596	# we don't do this in case we got an error	1180	# we don't do this in case we got an error
597	if ($_[1] eq "OK") {	1181	if ($_[1] eq "OK") {
598	$_[0]->unshift_read_line (sub {	1182	$_[0]->unshift_read (line => sub {
599	my $response = $_[1];	1183	my $response = $_[1];
600	...	1184	...
601	});	1185	});
602	}	1186	}
603	});	1187	});
604		1188
605	# request two	1189	# request two, simply returns 64 octets
606	$handle->push_write ("request 2\015\012");	1190	$handle->push_write ("request 2\015\012");
607		1191
608	# simply read 64 bytes, always	1192	# simply read 64 bytes, always
609	$handle->push_read_chunk (64, sub {	1193	$handle->push_read (chunk => 64, sub {
610	my $response = $_[1];	1194	my $response = $_[1];
611	...	1195	...
612	});	1196	});
613		1197
614	=over 4	1198	=over 4
615		1199
616	=cut	1200	=cut
617		1201
618	sub _drain_rbuf {	1202	sub _drain_rbuf {
619	my ($self) = @_;	1203	my ($self) = @_;
		1204
		1205	# avoid recursion
		1206	return if $self->{_skip_drain_rbuf};
		1207	local $self->{_skip_drain_rbuf} = 1;
		1208
		1209	while () {
		1210	# we need to use a separate tls read buffer, as we must not receive data while
		1211	# we are draining the buffer, and this can only happen with TLS.
		1212	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1213	if exists $self->{_tls_rbuf};
		1214
		1215	my $len = length $self->{rbuf};
		1216
		1217	if (my $cb = shift @{ $self->{_queue} }) {
		1218	unless ($cb->($self)) {
		1219	# no progress can be made
		1220	# (not enough data and no data forthcoming)
		1221	$self->_error (Errno::EPIPE, 1), return
		1222	if $self->{_eof};
		1223
		1224	unshift @{ $self->{_queue} }, $cb;
		1225	last;
		1226	}
		1227	} elsif ($self->{on_read}) {
		1228	last unless $len;
		1229
		1230	$self->{on_read}($self);
		1231
		1232	if (
		1233	$len == length $self->{rbuf} # if no data has been consumed
		1234	&& !@{ $self->{_queue} } # and the queue is still empty
		1235	&& $self->{on_read} # but we still have on_read
		1236	) {
		1237	# no further data will arrive
		1238	# so no progress can be made
		1239	$self->_error (Errno::EPIPE, 1), return
		1240	if $self->{_eof};
		1241
		1242	last; # more data might arrive
		1243	}
		1244	} else {
		1245	# read side becomes idle
		1246	delete $self->{_rw} unless $self->{tls};
		1247	last;
		1248	}
		1249	}
		1250
		1251	if ($self->{_eof}) {
		1252	$self->{on_eof}
		1253	? $self->{on_eof}($self)
		1254	: $self->_error (0, 1, "Unexpected end-of-file");
		1255
		1256	return;
		1257	}
620		1258
621	if (	1259	if (
622	defined $self->{rbuf_max}	1260	defined $self->{rbuf_max}
623	&& $self->{rbuf_max} < length $self->{rbuf}	1261	&& $self->{rbuf_max} < length $self->{rbuf}
624	) {	1262	) {
625	$! = &Errno::ENOSPC;	1263	$self->_error (Errno::ENOSPC, 1), return;
626	$self->error;
627	}	1264	}
628		1265
629	return if $self->{in_drain};	1266	# may need to restart read watcher
630	local $self->{in_drain} = 1;	1267	unless ($self->{_rw}) {
631		1268	$self->start_read
632	while (my $len = length $self->{rbuf}) {	1269	if $self->{on_read} || @{ $self->{_queue} };
633	no strict 'refs';
634	if (my $cb = shift @{ $self->{_queue} }) {
635	unless ($cb->($self)) {
636	if ($self->{_eof}) {
637	# no progress can be made (not enough data and no data forthcoming)
638	$! = &Errno::EPIPE;
639	$self->error;
640	}
641
642	unshift @{ $self->{_queue} }, $cb;
643	return;
644	}
645	} elsif ($self->{on_read}) {
646	$self->{on_read}($self);
647
648	if (
649	$self->{_eof} # if no further data will arrive
650	&& $len == length $self->{rbuf} # and no data has been consumed
651	&& !@{ $self->{_queue} } # and the queue is still empty
652	&& $self->{on_read} # and we still want to read data
653	) {
654	# then no progress can be made
655	$! = &Errno::EPIPE;
656	$self->error;
657	}
658	} else {
659	# read side becomes idle
660	delete $self->{_rw};
661	return;
662	}
663	}
664
665	if ($self->{_eof}) {
666	$self->_shutdown;
667	$self->{on_eof}($self)
668	if $self->{on_eof};
669	}	1270	}
670	}	1271	}
671		1272
672	=item $handle->on_read ($cb)	1273	=item $handle->on_read ($cb)
673		1274
674	This replaces the currently set C<on_read> callback, or clears it (when	1275	This replaces the currently set C<on_read> callback, or clears it (when
675	the new callback is C<undef>). See the description of C<on_read> in the	1276	the new callback is C<undef>). See the description of C<on_read> in the
676	constructor.	1277	constructor.
677		1278
		1279	This method may invoke callbacks (and therefore the handle might be
		1280	destroyed after it returns).
		1281
678	=cut	1282	=cut
679		1283
680	sub on_read {	1284	sub on_read {
681	my ($self, $cb) = @_;	1285	my ($self, $cb) = @_;
682		1286
683	$self->{on_read} = $cb;	1287	$self->{on_read} = $cb;
		1288	$self->_drain_rbuf if $cb;
684	}	1289	}
685		1290
686	=item $handle->rbuf	1291	=item $handle->rbuf
687		1292
688	Returns the read buffer (as a modifiable lvalue).	1293	Returns the read buffer (as a modifiable lvalue). You can also access the
		1294	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1295	much faster, and no less clean).
689		1296
690	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1297	The only operation allowed on the read buffer (apart from looking at it)
691	you want.	1298	is removing data from its beginning. Otherwise modifying or appending to
		1299	it is not allowed and will lead to hard-to-track-down bugs.
692		1300
693	NOTE: The read buffer should only be used or modified if the C<on_read>,	1301	NOTE: The read buffer should only be used or modified in the C<on_read>
694	C<push_read> or C<unshift_read> methods are used. The other read methods	1302	callback or when C<push_read> or C<unshift_read> are used with a single
695	automatically manage the read buffer.	1303	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1304	will manage the read buffer on their own.
696		1305
697	=cut	1306	=cut
698		1307
699	sub rbuf : lvalue {	1308	sub rbuf : lvalue {
700	$_[0]{rbuf}	1309	$_[0]{rbuf}
…		…
717		1326
718	If enough data was available, then the callback must remove all data it is	1327	If enough data was available, then the callback must remove all data it is
719	interested in (which can be none at all) and return a true value. After returning	1328	interested in (which can be none at all) and return a true value. After returning
720	true, it will be removed from the queue.	1329	true, it will be removed from the queue.
721		1330
		1331	These methods may invoke callbacks (and therefore the handle might be
		1332	destroyed after it returns).
		1333
722	=cut	1334	=cut
723		1335
724	our %RH;	1336	our %RH;
725		1337
726	sub register_read_type($$) {	1338	sub register_read_type($$) {
…		…
732	my $cb = pop;	1344	my $cb = pop;
733		1345
734	if (@_) {	1346	if (@_) {
735	my $type = shift;	1347	my $type = shift;
736		1348
		1349	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
737	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1350	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
738	->($self, $cb, @_);	1351	->($self, $cb, @_);
739	}	1352	}
740		1353
741	push @{ $self->{_queue} }, $cb;	1354	push @{ $self->{_queue} }, $cb;
742	$self->_drain_rbuf;	1355	$self->_drain_rbuf;
…		…
747	my $cb = pop;	1360	my $cb = pop;
748		1361
749	if (@_) {	1362	if (@_) {
750	my $type = shift;	1363	my $type = shift;
751		1364
		1365	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
752	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1366	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
753	->($self, $cb, @_);	1367	->($self, $cb, @_);
754	}	1368	}
755
756		1369
757	unshift @{ $self->{_queue} }, $cb;	1370	unshift @{ $self->{_queue} }, $cb;
758	$self->_drain_rbuf;	1371	$self->_drain_rbuf;
759	}	1372	}
760		1373
…		…
762		1375
763	=item $handle->unshift_read (type => @args, $cb)	1376	=item $handle->unshift_read (type => @args, $cb)
764		1377
765	Instead of providing a callback that parses the data itself you can chose	1378	Instead of providing a callback that parses the data itself you can chose
766	between a number of predefined parsing formats, for chunks of data, lines	1379	between a number of predefined parsing formats, for chunks of data, lines
767	etc.	1380	etc. You can also specify the (fully qualified) name of a package, in
		1381	which case AnyEvent tries to load the package and then expects to find the
		1382	C<anyevent_read_type> function inside (see "custom read types", below).
768		1383
769	Predefined types are (if you have ideas for additional types, feel free to	1384	Predefined types are (if you have ideas for additional types, feel free to
770	drop by and tell us):	1385	drop by and tell us):
771		1386
772	=over 4	1387	=over 4
…		…
793	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1408	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
794	1	1409	1
795	}	1410	}
796	};	1411	};
797		1412
798	# compatibility with older API
799	sub push_read_chunk {
800	$_[0]->push_read (chunk => $_[1], $_[2]);
801	}
802
803	sub unshift_read_chunk {
804	$_[0]->unshift_read (chunk => $_[1], $_[2]);
805	}
806
807	=item line => [$eol, ]$cb->($handle, $line, $eol)	1413	=item line => [$eol, ]$cb->($handle, $line, $eol)
808		1414
809	The callback will be called only once a full line (including the end of	1415	The callback will be called only once a full line (including the end of
810	line marker, C<$eol>) has been read. This line (excluding the end of line	1416	line marker, C<$eol>) has been read. This line (excluding the end of line
811	marker) will be passed to the callback as second argument (C<$line>), and	1417	marker) will be passed to the callback as second argument (C<$line>), and
…		…
826	=cut	1432	=cut
827		1433
828	register_read_type line => sub {	1434	register_read_type line => sub {
829	my ($self, $cb, $eol) = @_;	1435	my ($self, $cb, $eol) = @_;
830		1436
831	$eol = qr|(\015?\012)| if @_ < 3;	1437	if (@_ < 3) {
832	$eol = quotemeta $eol unless ref $eol;	1438	# this is more than twice as fast as the generic code below
833	$eol = qr|^(.*?)($eol)|s;
834
835	sub {	1439	sub {
836	$_[0]{rbuf} =~ s/$eol// or return;	1440	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
837		1441
838	$cb->($_[0], $1, $2);	1442	$cb->($_[0], $1, $2);
839	1
840	}
841	};
842
843	# compatibility with older API
844	sub push_read_line {
845	my $self = shift;
846	$self->push_read (line => @_);
847	}
848
849	sub unshift_read_line {
850	my $self = shift;
851	$self->unshift_read (line => @_);
852	}
853
854	=item netstring => $cb->($handle, $string)
855
856	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
857
858	Throws an error with C<$!> set to EBADMSG on format violations.
859
860	=cut
861
862	register_read_type netstring => sub {
863	my ($self, $cb) = @_;
864
865	sub {
866	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
867	if ($_[0]{rbuf} =~ /[^0-9]/) {
868	$! = &Errno::EBADMSG;
869	$self->error;
870	}	1443	1
871	return;
872	}	1444	}
		1445	} else {
		1446	$eol = quotemeta $eol unless ref $eol;
		1447	$eol = qr|^(.*?)($eol)|s;
873		1448
874	my $len = $1;	1449	sub {
		1450	$_[0]{rbuf} =~ s/$eol// or return;
875		1451
876	$self->unshift_read (chunk => $len, sub {	1452	$cb->($_[0], $1, $2);
877	my $string = $_[1];
878	$_[0]->unshift_read (chunk => 1, sub {
879	if ($_[1] eq ",") {
880	$cb->($_[0], $string);
881	} else {
882	$! = &Errno::EBADMSG;
883	$self->error;
884	}
885	});	1453	1
886	});	1454	}
887
888	1
889	}	1455	}
890	};	1456	};
891		1457
892	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1458	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
893		1459
…		…
913	the receive buffer when neither C<$accept> nor C<$reject> match,	1479	the receive buffer when neither C<$accept> nor C<$reject> match,
914	and everything preceding and including the match will be accepted	1480	and everything preceding and including the match will be accepted
915	unconditionally. This is useful to skip large amounts of data that you	1481	unconditionally. This is useful to skip large amounts of data that you
916	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1482	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
917	have to start matching from the beginning. This is purely an optimisation	1483	have to start matching from the beginning. This is purely an optimisation
918	and is usually worth only when you expect more than a few kilobytes.	1484	and is usually worth it only when you expect more than a few kilobytes.
919		1485
920	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1486	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
921	expect the header to be very large (it isn't in practise, but...), we use	1487	expect the header to be very large (it isn't in practice, but...), we use
922	a skip regex to skip initial portions. The skip regex is tricky in that	1488	a skip regex to skip initial portions. The skip regex is tricky in that
923	it only accepts something not ending in either \015 or \012, as these are	1489	it only accepts something not ending in either \015 or \012, as these are
924	required for the accept regex.	1490	required for the accept regex.
925		1491
926	$handle->push_read (regex =>	1492	$handle->push_read (regex =>
…		…
945	return 1;	1511	return 1;
946	}	1512	}
947		1513
948	# reject	1514	# reject
949	if ($reject && $$rbuf =~ $reject) {	1515	if ($reject && $$rbuf =~ $reject) {
950	$! = &Errno::EBADMSG;	1516	$self->_error (Errno::EBADMSG);
951	$self->error;
952	}	1517	}
953		1518
954	# skip	1519	# skip
955	if ($skip && $$rbuf =~ $skip) {	1520	if ($skip && $$rbuf =~ $skip) {
956	$data .= substr $$rbuf, 0, $+[0], "";	1521	$data .= substr $$rbuf, 0, $+[0], "";
…		…
958		1523
959	()	1524	()
960	}	1525	}
961	};	1526	};
962		1527
		1528	=item netstring => $cb->($handle, $string)
		1529
		1530	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
		1531
		1532	Throws an error with C<$!> set to EBADMSG on format violations.
		1533
		1534	=cut
		1535
		1536	register_read_type netstring => sub {
		1537	my ($self, $cb) = @_;
		1538
		1539	sub {
		1540	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
		1541	if ($_[0]{rbuf} =~ /[^0-9]/) {
		1542	$self->_error (Errno::EBADMSG);
		1543	}
		1544	return;
		1545	}
		1546
		1547	my $len = $1;
		1548
		1549	$self->unshift_read (chunk => $len, sub {
		1550	my $string = $_[1];
		1551	$_[0]->unshift_read (chunk => 1, sub {
		1552	if ($_[1] eq ",") {
		1553	$cb->($_[0], $string);
		1554	} else {
		1555	$self->_error (Errno::EBADMSG);
		1556	}
		1557	});
		1558	});
		1559
		1560	1
		1561	}
		1562	};
		1563
		1564	=item packstring => $format, $cb->($handle, $string)
		1565
		1566	An octet string prefixed with an encoded length. The encoding C<$format>
		1567	uses the same format as a Perl C<pack> format, but must specify a single
		1568	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1569	optional C<!>, C<< < >> or C<< > >> modifier).
		1570
		1571	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1572	EPP uses a prefix of C<N> (4 octtes).
		1573
		1574	Example: read a block of data prefixed by its length in BER-encoded
		1575	format (very efficient).
		1576
		1577	$handle->push_read (packstring => "w", sub {
		1578	my ($handle, $data) = @_;
		1579	});
		1580
		1581	=cut
		1582
		1583	register_read_type packstring => sub {
		1584	my ($self, $cb, $format) = @_;
		1585
		1586	sub {
		1587	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1588	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
		1589	or return;
		1590
		1591	$format = length pack $format, $len;
		1592
		1593	# bypass unshift if we already have the remaining chunk
		1594	if ($format + $len <= length $_[0]{rbuf}) {
		1595	my $data = substr $_[0]{rbuf}, $format, $len;
		1596	substr $_[0]{rbuf}, 0, $format + $len, "";
		1597	$cb->($_[0], $data);
		1598	} else {
		1599	# remove prefix
		1600	substr $_[0]{rbuf}, 0, $format, "";
		1601
		1602	# read remaining chunk
		1603	$_[0]->unshift_read (chunk => $len, $cb);
		1604	}
		1605
		1606	1
		1607	}
		1608	};
		1609
963	=item json => $cb->($handle, $hash_or_arrayref)	1610	=item json => $cb->($handle, $hash_or_arrayref)
964		1611
965	Reads a JSON object or array, decodes it and passes it to the callback.	1612	Reads a JSON object or array, decodes it and passes it to the
		1613	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
966		1614
967	If a C<json> object was passed to the constructor, then that will be used	1615	If a C<json> object was passed to the constructor, then that will be used
968	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1616	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
969		1617
970	This read type uses the incremental parser available with JSON version	1618	This read type uses the incremental parser available with JSON version
…		…
977	the C<json> write type description, above, for an actual example.	1625	the C<json> write type description, above, for an actual example.
978		1626
979	=cut	1627	=cut
980		1628
981	register_read_type json => sub {	1629	register_read_type json => sub {
982	my ($self, $cb, $accept, $reject, $skip) = @_;	1630	my ($self, $cb) = @_;
983		1631
984	require JSON;	1632	my $json = $self->{json} ||= json_coder;
985		1633
986	my $data;	1634	my $data;
987	my $rbuf = \$self->{rbuf};	1635	my $rbuf = \$self->{rbuf};
988		1636
989	my $json = $self->{json} ||= JSON->new->utf8;
990
991	sub {	1637	sub {
992	my $ref = $json->incr_parse ($self->{rbuf});	1638	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
993		1639
994	if ($ref) {	1640	if ($ref) {
995	$self->{rbuf} = $json->incr_text;	1641	$self->{rbuf} = $json->incr_text;
996	$json->incr_text = "";	1642	$json->incr_text = "";
997	$cb->($self, $ref);	1643	$cb->($self, $ref);
998		1644
999	1	1645	1
		1646	} elsif ($@) {
		1647	# error case
		1648	$json->incr_skip;
		1649
		1650	$self->{rbuf} = $json->incr_text;
		1651	$json->incr_text = "";
		1652
		1653	$self->_error (Errno::EBADMSG);
		1654
		1655	()
1000	} else {	1656	} else {
1001	$self->{rbuf} = "";	1657	$self->{rbuf} = "";
		1658
1002	()	1659	()
1003	}	1660	}
1004	}	1661	}
1005	};	1662	};
1006		1663
		1664	=item storable => $cb->($handle, $ref)
		1665
		1666	Deserialises a L<Storable> frozen representation as written by the
		1667	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1668	data).
		1669
		1670	Raises C<EBADMSG> error if the data could not be decoded.
		1671
		1672	=cut
		1673
		1674	register_read_type storable => sub {
		1675	my ($self, $cb) = @_;
		1676
		1677	require Storable;
		1678
		1679	sub {
		1680	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1681	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
		1682	or return;
		1683
		1684	my $format = length pack "w", $len;
		1685
		1686	# bypass unshift if we already have the remaining chunk
		1687	if ($format + $len <= length $_[0]{rbuf}) {
		1688	my $data = substr $_[0]{rbuf}, $format, $len;
		1689	substr $_[0]{rbuf}, 0, $format + $len, "";
		1690	$cb->($_[0], Storable::thaw ($data));
		1691	} else {
		1692	# remove prefix
		1693	substr $_[0]{rbuf}, 0, $format, "";
		1694
		1695	# read remaining chunk
		1696	$_[0]->unshift_read (chunk => $len, sub {
		1697	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1698	$cb->($_[0], $ref);
		1699	} else {
		1700	$self->_error (Errno::EBADMSG);
		1701	}
		1702	});
		1703	}
		1704
		1705	1
		1706	}
		1707	};
		1708
1007	=back	1709	=back
1008		1710
1009	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1711	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1010		1712
1011	This function (not method) lets you add your own types to C<push_read>.	1713	Instead of one of the predefined types, you can also specify the name
		1714	of a package. AnyEvent will try to load the package and then expects to
		1715	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1716	progressively tries to load the parent package until it either finds the
		1717	function (good) or runs out of packages (bad).
1012		1718
1013	Whenever the given C<type> is used, C<push_read> will invoke the code	1719	Whenever this type is used, C<push_read> will invoke the function with the
1014	reference with the handle object, the callback and the remaining	1720	handle object, the original callback and the remaining arguments.
1015	arguments.
1016		1721
1017	The code reference is supposed to return a callback (usually a closure)	1722	The function is supposed to return a callback (usually a closure) that
1018	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1723	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1724	mentally treat the function as a "configurable read type to read callback"
		1725	converter.
1019		1726
1020	It should invoke the passed callback when it is done reading (remember to	1727	It should invoke the original callback when it is done reading (remember
1021	pass C<$handle> as first argument as all other callbacks do that).	1728	to pass C<$handle> as first argument as all other callbacks do that,
		1729	although there is no strict requirement on this).
1022		1730
1023	Note that this is a function, and all types registered this way will be
1024	global, so try to use unique names.
1025
1026	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1731	For examples, see the source of this module (F<perldoc -m
1027	search for C<register_read_type>)).	1732	AnyEvent::Handle>, search for C<register_read_type>)).
1028		1733
1029	=item $handle->stop_read	1734	=item $handle->stop_read
1030		1735
1031	=item $handle->start_read	1736	=item $handle->start_read
1032		1737
1033	In rare cases you actually do not want to read anything from the	1738	In rare cases you actually do not want to read anything from the
1034	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1739	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
1035	any queued callbacks will be executed then. To start reading again, call	1740	any queued callbacks will be executed then. To start reading again, call
1036	C<start_read>.	1741	C<start_read>.
1037		1742
		1743	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1744	you change the C<on_read> callback or push/unshift a read callback, and it
		1745	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1746	there are any read requests in the queue.
		1747
		1748	These methods will have no effect when in TLS mode (as TLS doesn't support
		1749	half-duplex connections).
		1750
1038	=cut	1751	=cut
1039		1752
1040	sub stop_read {	1753	sub stop_read {
1041	my ($self) = @_;	1754	my ($self) = @_;
1042		1755
1043	delete $self->{_rw};	1756	delete $self->{_rw} unless $self->{tls};
1044	}	1757	}
1045		1758
1046	sub start_read {	1759	sub start_read {
1047	my ($self) = @_;	1760	my ($self) = @_;
1048		1761
1049	unless ($self->{_rw} || $self->{_eof}) {	1762	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1050	Scalar::Util::weaken $self;	1763	Scalar::Util::weaken $self;
1051		1764
1052	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1765	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1053	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1766	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1054	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1767	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1055		1768
1056	if ($len > 0) {	1769	if ($len > 0) {
1057	$self->{_activity} = AnyEvent->now;	1770	$self->{_activity} = $self->{_ractivity} = AE::now;
1058		1771
1059	$self->{filter_r}	1772	if ($self->{tls}) {
1060	? $self->{filter_r}->($self, $rbuf)	1773	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
		1774
		1775	&_dotls ($self);
		1776	} else {
1061	: $self->_drain_rbuf;	1777	$self->_drain_rbuf;
		1778	}
		1779
		1780	if ($len == $self->{read_size}) {
		1781	$self->{read_size} *= 2;
		1782	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		1783	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		1784	}
1062		1785
1063	} elsif (defined $len) {	1786	} elsif (defined $len) {
1064	delete $self->{_rw};	1787	delete $self->{_rw};
1065	delete $self->{_ww};
1066	delete $self->{_tw};
1067	$self->{_eof} = 1;	1788	$self->{_eof} = 1;
1068	$self->_drain_rbuf;	1789	$self->_drain_rbuf;
1069		1790
1070	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1791	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1071	return $self->error;	1792	return $self->_error ($!, 1);
1072	}	1793	}
1073	});	1794	};
1074	}	1795	}
1075	}	1796	}
1076		1797
		1798	our $ERROR_SYSCALL;
		1799	our $ERROR_WANT_READ;
		1800
		1801	sub _tls_error {
		1802	my ($self, $err) = @_;
		1803
		1804	return $self->_error ($!, 1)
		1805	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1806
		1807	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1808
		1809	# reduce error string to look less scary
		1810	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1811
		1812	if ($self->{_on_starttls}) {
		1813	(delete $self->{_on_starttls})->($self, undef, $err);
		1814	&_freetls;
		1815	} else {
		1816	&_freetls;
		1817	$self->_error (Errno::EPROTO, 1, $err);
		1818	}
		1819	}
		1820
		1821	# poll the write BIO and send the data if applicable
		1822	# also decode read data if possible
		1823	# this is basiclaly our TLS state machine
		1824	# more efficient implementations are possible with openssl,
		1825	# but not with the buggy and incomplete Net::SSLeay.
1077	sub _dotls {	1826	sub _dotls {
1078	my ($self) = @_;	1827	my ($self) = @_;
1079		1828
		1829	my $tmp;
		1830
1080	if (length $self->{_tls_wbuf}) {	1831	if (length $self->{_tls_wbuf}) {
1081	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1832	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1082	substr $self->{_tls_wbuf}, 0, $len, "";	1833	substr $self->{_tls_wbuf}, 0, $tmp, "";
1083	}	1834	}
1084	}
1085		1835
		1836	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1837	return $self->_tls_error ($tmp)
		1838	if $tmp != $ERROR_WANT_READ
		1839	&& ($tmp != $ERROR_SYSCALL || $!);
		1840	}
		1841
		1842	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1843	unless (length $tmp) {
		1844	$self->{_on_starttls}
		1845	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1846	&_freetls;
		1847
		1848	if ($self->{on_stoptls}) {
		1849	$self->{on_stoptls}($self);
		1850	return;
		1851	} else {
		1852	# let's treat SSL-eof as we treat normal EOF
		1853	delete $self->{_rw};
		1854	$self->{_eof} = 1;
		1855	}
		1856	}
		1857
		1858	$self->{_tls_rbuf} .= $tmp;
		1859	$self->_drain_rbuf;
		1860	$self->{tls} or return; # tls session might have gone away in callback
		1861	}
		1862
		1863	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1864	return $self->_tls_error ($tmp)
		1865	if $tmp != $ERROR_WANT_READ
		1866	&& ($tmp != $ERROR_SYSCALL || $!);
		1867
1086	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1868	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1087	$self->{wbuf} .= $buf;	1869	$self->{wbuf} .= $tmp;
1088	$self->_drain_wbuf;	1870	$self->_drain_wbuf;
		1871	$self->{tls} or return; # tls session might have gone away in callback
1089	}	1872	}
1090		1873
1091	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {	1874	$self->{_on_starttls}
1092	$self->{rbuf} .= $buf;	1875	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1093	$self->_drain_rbuf;	1876	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1094	}
1095
1096	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1097
1098	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1099	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1100	$self->error;
1101	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1102	$! = &Errno::EIO;
1103	$self->error;
1104	}
1105
1106	# all others are fine for our purposes
1107	}
1108	}	1877	}
1109		1878
1110	=item $handle->starttls ($tls[, $tls_ctx])	1879	=item $handle->starttls ($tls[, $tls_ctx])
1111		1880
1112	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1881	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1113	object is created, you can also do that at a later time by calling	1882	object is created, you can also do that at a later time by calling
1114	C<starttls>.	1883	C<starttls>.
1115		1884
		1885	Starting TLS is currently an asynchronous operation - when you push some
		1886	write data and then call C<< ->starttls >> then TLS negotiation will start
		1887	immediately, after which the queued write data is then sent.
		1888
1116	The first argument is the same as the C<tls> constructor argument (either	1889	The first argument is the same as the C<tls> constructor argument (either
1117	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1890	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1118		1891
1119	The second argument is the optional C<Net::SSLeay::CTX> object that is	1892	The second argument is the optional C<AnyEvent::TLS> object that is used
1120	used when AnyEvent::Handle has to create its own TLS connection object.	1893	when AnyEvent::Handle has to create its own TLS connection object, or
		1894	a hash reference with C<< key => value >> pairs that will be used to
		1895	construct a new context.
1121		1896
1122	The TLS connection object will end up in C<< $handle->{tls} >> after this	1897	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1123	call and can be used or changed to your liking. Note that the handshake	1898	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1124	might have already started when this function returns.	1899	changed to your liking. Note that the handshake might have already started
		1900	when this function returns.
1125		1901
1126	=cut	1902	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1903	handshakes on the same stream. It is best to not attempt to use the
		1904	stream after stopping TLS.
1127		1905
1128	# TODO: maybe document...	1906	This method may invoke callbacks (and therefore the handle might be
		1907	destroyed after it returns).
		1908
		1909	=cut
		1910
		1911	our %TLS_CACHE; #TODO not yet documented, should we?
		1912
1129	sub starttls {	1913	sub starttls {
1130	my ($self, $ssl, $ctx) = @_;	1914	my ($self, $tls, $ctx) = @_;
1131		1915
1132	$self->stoptls;	1916	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1917	if $self->{tls};
1133		1918
1134	if ($ssl eq "accept") {	1919	$self->{tls} = $tls;
1135	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1920	$self->{tls_ctx} = $ctx if @_ > 2;
1136	Net::SSLeay::set_accept_state ($ssl);	1921
1137	} elsif ($ssl eq "connect") {	1922	return unless $self->{fh};
1138	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1923
1139	Net::SSLeay::set_connect_state ($ssl);	1924	require Net::SSLeay;
		1925
		1926	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1927	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1928
		1929	$tls = delete $self->{tls};
		1930	$ctx = $self->{tls_ctx};
		1931
		1932	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1933
		1934	if ("HASH" eq ref $ctx) {
		1935	require AnyEvent::TLS;
		1936
		1937	if ($ctx->{cache}) {
		1938	my $key = $ctx+0;
		1939	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1940	} else {
		1941	$ctx = new AnyEvent::TLS %$ctx;
		1942	}
		1943	}
1140	}	1944
1141		1945	$self->{tls_ctx} = $ctx || TLS_CTX ();
1142	$self->{tls} = $ssl;	1946	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1143		1947
1144	# basically, this is deep magic (because SSL_read should have the same issues)	1948	# basically, this is deep magic (because SSL_read should have the same issues)
1145	# but the openssl maintainers basically said: "trust us, it just works".	1949	# but the openssl maintainers basically said: "trust us, it just works".
1146	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1950	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1147	# and mismaintained ssleay-module doesn't even offer them).	1951	# and mismaintained ssleay-module doesn't even offer them).
1148	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1952	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1953	#
		1954	# in short: this is a mess.
		1955	#
		1956	# note that we do not try to keep the length constant between writes as we are required to do.
		1957	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1958	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1959	# have identity issues in that area.
1149	Net::SSLeay::CTX_set_mode ($self->{tls},	1960	# Net::SSLeay::CTX_set_mode ($ssl,
1150	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1961	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1151	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1962	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1963	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1152		1964
1153	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1965	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1154	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1966	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1155		1967
		1968	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1969
1156	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1970	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1157		1971
1158	$self->{filter_w} = sub {	1972	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1159	$_[0]{_tls_wbuf} .= ${$_[1]};	1973	if $self->{on_starttls};
1160	&_dotls;	1974
1161	};	1975	&_dotls; # need to trigger the initial handshake
1162	$self->{filter_r} = sub {	1976	$self->start_read; # make sure we actually do read
1163	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1164	&_dotls;
1165	};
1166	}	1977	}
1167		1978
1168	=item $handle->stoptls	1979	=item $handle->stoptls
1169		1980
1170	Destroys the SSL connection, if any. Partial read or write data will be	1981	Shuts down the SSL connection - this makes a proper EOF handshake by
1171	lost.	1982	sending a close notify to the other side, but since OpenSSL doesn't
		1983	support non-blocking shut downs, it is not guaranteed that you can re-use
		1984	the stream afterwards.
		1985
		1986	This method may invoke callbacks (and therefore the handle might be
		1987	destroyed after it returns).
1172		1988
1173	=cut	1989	=cut
1174		1990
1175	sub stoptls {	1991	sub stoptls {
1176	my ($self) = @_;	1992	my ($self) = @_;
1177		1993
1178	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1994	if ($self->{tls} && $self->{fh}) {
		1995	Net::SSLeay::shutdown ($self->{tls});
1179		1996
1180	delete $self->{_rbio};	1997	&_dotls;
1181	delete $self->{_wbio};	1998
1182	delete $self->{_tls_wbuf};	1999	# # we don't give a shit. no, we do, but we can't. no...#d#
1183	delete $self->{filter_r};	2000	# # we, we... have to use openssl :/#d#
1184	delete $self->{filter_w};	2001	# &_freetls;#d#
		2002	}
		2003	}
		2004
		2005	sub _freetls {
		2006	my ($self) = @_;
		2007
		2008	return unless $self->{tls};
		2009
		2010	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2011	if $self->{tls} > 0;
		2012
		2013	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1185	}	2014	}
1186		2015
1187	sub DESTROY {	2016	sub DESTROY {
1188	my $self = shift;	2017	my ($self) = @_;
1189		2018
1190	$self->stoptls;	2019	&_freetls;
		2020
		2021	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		2022
		2023	if ($linger && length $self->{wbuf} && $self->{fh}) {
		2024	my $fh = delete $self->{fh};
		2025	my $wbuf = delete $self->{wbuf};
		2026
		2027	my @linger;
		2028
		2029	push @linger, AE::io $fh, 1, sub {
		2030	my $len = syswrite $fh, $wbuf, length $wbuf;
		2031
		2032	if ($len > 0) {
		2033	substr $wbuf, 0, $len, "";
		2034	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK)) {
		2035	@linger = (); # end
		2036	}
		2037	};
		2038	push @linger, AE::timer $linger, 0, sub {
		2039	@linger = ();
		2040	};
		2041	}
1191	}	2042	}
		2043
		2044	=item $handle->destroy
		2045
		2046	Shuts down the handle object as much as possible - this call ensures that
		2047	no further callbacks will be invoked and as many resources as possible
		2048	will be freed. Any method you will call on the handle object after
		2049	destroying it in this way will be silently ignored (and it will return the
		2050	empty list).
		2051
		2052	Normally, you can just "forget" any references to an AnyEvent::Handle
		2053	object and it will simply shut down. This works in fatal error and EOF
		2054	callbacks, as well as code outside. It does I<NOT> work in a read or write
		2055	callback, so when you want to destroy the AnyEvent::Handle object from
		2056	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		2057	that case.
		2058
		2059	Destroying the handle object in this way has the advantage that callbacks
		2060	will be removed as well, so if those are the only reference holders (as
		2061	is common), then one doesn't need to do anything special to break any
		2062	reference cycles.
		2063
		2064	The handle might still linger in the background and write out remaining
		2065	data, as specified by the C<linger> option, however.
		2066
		2067	=cut
		2068
		2069	sub destroy {
		2070	my ($self) = @_;
		2071
		2072	$self->DESTROY;
		2073	%$self = ();
		2074	bless $self, "AnyEvent::Handle::destroyed";
		2075	}
		2076
		2077	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2078	#nop
		2079	}
		2080
		2081	=item $handle->destroyed
		2082
		2083	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2084	->destroy >>, true otherwise.
		2085
		2086	Can be useful to decide whether the handle is still valid after some
		2087	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2088	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2089	can destroy the handle, so work can be avoided by checking sometimes:
		2090
		2091	$hdl->starttls ("accept");
		2092	return if $hdl->destroyed;
		2093	$hdl->push_write (...
		2094
		2095	Note that the call to C<push_write> will silently be ignored if the handle
		2096	has been destroyed, so often you can just ignore the possibility of the
		2097	handle being destroyed.
		2098
		2099	=cut
		2100
		2101	sub destroyed { 0 }
		2102	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1192		2103
1193	=item AnyEvent::Handle::TLS_CTX	2104	=item AnyEvent::Handle::TLS_CTX
1194		2105
1195	This function creates and returns the Net::SSLeay::CTX object used by	2106	This function creates and returns the AnyEvent::TLS object used by default
1196	default for TLS mode.	2107	for TLS mode.
1197		2108
1198	The context is created like this:	2109	The context is created by calling L<AnyEvent::TLS> without any arguments.
1199
1200	Net::SSLeay::load_error_strings;
1201	Net::SSLeay::SSLeay_add_ssl_algorithms;
1202	Net::SSLeay::randomize;
1203
1204	my $CTX = Net::SSLeay::CTX_new;
1205
1206	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1207		2110
1208	=cut	2111	=cut
1209		2112
1210	our $TLS_CTX;	2113	our $TLS_CTX;
1211		2114
1212	sub TLS_CTX() {	2115	sub TLS_CTX() {
1213	$TLS_CTX || do {	2116	$TLS_CTX ||= do {
1214	require Net::SSLeay;	2117	require AnyEvent::TLS;
1215		2118
1216	Net::SSLeay::load_error_strings ();	2119	new AnyEvent::TLS
1217	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1218	Net::SSLeay::randomize ();
1219
1220	$TLS_CTX = Net::SSLeay::CTX_new ();
1221
1222	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1223
1224	$TLS_CTX
1225	}	2120	}
1226	}	2121	}
1227		2122
1228	=back	2123	=back
		2124
		2125
		2126	=head1 NONFREQUENTLY ASKED QUESTIONS
		2127
		2128	=over 4
		2129
		2130	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2131	still get further invocations!
		2132
		2133	That's because AnyEvent::Handle keeps a reference to itself when handling
		2134	read or write callbacks.
		2135
		2136	It is only safe to "forget" the reference inside EOF or error callbacks,
		2137	from within all other callbacks, you need to explicitly call the C<<
		2138	->destroy >> method.
		2139
		2140	=item I get different callback invocations in TLS mode/Why can't I pause
		2141	reading?
		2142
		2143	Unlike, say, TCP, TLS connections do not consist of two independent
		2144	communication channels, one for each direction. Or put differently, the
		2145	read and write directions are not independent of each other: you cannot
		2146	write data unless you are also prepared to read, and vice versa.
		2147
		2148	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
		2149	callback invocations when you are not expecting any read data - the reason
		2150	is that AnyEvent::Handle always reads in TLS mode.
		2151
		2152	During the connection, you have to make sure that you always have a
		2153	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2154	connection (or when you no longer want to use it) you can call the
		2155	C<destroy> method.
		2156
		2157	=item How do I read data until the other side closes the connection?
		2158
		2159	If you just want to read your data into a perl scalar, the easiest way
		2160	to achieve this is by setting an C<on_read> callback that does nothing,
		2161	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2162	will be in C<$_[0]{rbuf}>:
		2163
		2164	$handle->on_read (sub { });
		2165	$handle->on_eof (undef);
		2166	$handle->on_error (sub {
		2167	my $data = delete $_[0]{rbuf};
		2168	});
		2169
		2170	The reason to use C<on_error> is that TCP connections, due to latencies
		2171	and packets loss, might get closed quite violently with an error, when in
		2172	fact all data has been received.
		2173
		2174	It is usually better to use acknowledgements when transferring data,
		2175	to make sure the other side hasn't just died and you got the data
		2176	intact. This is also one reason why so many internet protocols have an
		2177	explicit QUIT command.
		2178
		2179	=item I don't want to destroy the handle too early - how do I wait until
		2180	all data has been written?
		2181
		2182	After writing your last bits of data, set the C<on_drain> callback
		2183	and destroy the handle in there - with the default setting of
		2184	C<low_water_mark> this will be called precisely when all data has been
		2185	written to the socket:
		2186
		2187	$handle->push_write (...);
		2188	$handle->on_drain (sub {
		2189	warn "all data submitted to the kernel\n";
		2190	undef $handle;
		2191	});
		2192
		2193	If you just want to queue some data and then signal EOF to the other side,
		2194	consider using C<< ->push_shutdown >> instead.
		2195
		2196	=item I want to contact a TLS/SSL server, I don't care about security.
		2197
		2198	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2199	connect to it and then create the AnyEvent::Handle with the C<tls>
		2200	parameter:
		2201
		2202	tcp_connect $host, $port, sub {
		2203	my ($fh) = @_;
		2204
		2205	my $handle = new AnyEvent::Handle
		2206	fh => $fh,
		2207	tls => "connect",
		2208	on_error => sub { ... };
		2209
		2210	$handle->push_write (...);
		2211	};
		2212
		2213	=item I want to contact a TLS/SSL server, I do care about security.
		2214
		2215	Then you should additionally enable certificate verification, including
		2216	peername verification, if the protocol you use supports it (see
		2217	L<AnyEvent::TLS>, C<verify_peername>).
		2218
		2219	E.g. for HTTPS:
		2220
		2221	tcp_connect $host, $port, sub {
		2222	my ($fh) = @_;
		2223
		2224	my $handle = new AnyEvent::Handle
		2225	fh => $fh,
		2226	peername => $host,
		2227	tls => "connect",
		2228	tls_ctx => { verify => 1, verify_peername => "https" },
		2229	...
		2230
		2231	Note that you must specify the hostname you connected to (or whatever
		2232	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2233	peername verification will be done.
		2234
		2235	The above will use the system-dependent default set of trusted CA
		2236	certificates. If you want to check against a specific CA, add the
		2237	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2238
		2239	tls_ctx => {
		2240	verify => 1,
		2241	verify_peername => "https",
		2242	ca_file => "my-ca-cert.pem",
		2243	},
		2244
		2245	=item I want to create a TLS/SSL server, how do I do that?
		2246
		2247	Well, you first need to get a server certificate and key. You have
		2248	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2249	self-signed certificate (cheap. check the search engine of your choice,
		2250	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2251	nice program for that purpose).
		2252
		2253	Then create a file with your private key (in PEM format, see
		2254	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2255	file should then look like this:
		2256
		2257	-----BEGIN RSA PRIVATE KEY-----
		2258	...header data
		2259	... lots of base64'y-stuff
		2260	-----END RSA PRIVATE KEY-----
		2261
		2262	-----BEGIN CERTIFICATE-----
		2263	... lots of base64'y-stuff
		2264	-----END CERTIFICATE-----
		2265
		2266	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2267	specify this file as C<cert_file>:
		2268
		2269	tcp_server undef, $port, sub {
		2270	my ($fh) = @_;
		2271
		2272	my $handle = new AnyEvent::Handle
		2273	fh => $fh,
		2274	tls => "accept",
		2275	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2276	...
		2277
		2278	When you have intermediate CA certificates that your clients might not
		2279	know about, just append them to the C<cert_file>.
		2280
		2281	=back
		2282
1229		2283
1230	=head1 SUBCLASSING AnyEvent::Handle	2284	=head1 SUBCLASSING AnyEvent::Handle
1231		2285
1232	In many cases, you might want to subclass AnyEvent::Handle.	2286	In many cases, you might want to subclass AnyEvent::Handle.
1233		2287
…		…
1237	=over 4	2291	=over 4
1238		2292
1239	=item * all constructor arguments become object members.	2293	=item * all constructor arguments become object members.
1240		2294
1241	At least initially, when you pass a C<tls>-argument to the constructor it	2295	At least initially, when you pass a C<tls>-argument to the constructor it
1242	will end up in C<< $handle->{tls} >>. Those members might be changes or	2296	will end up in C<< $handle->{tls} >>. Those members might be changed or
1243	mutated later on (for example C<tls> will hold the TLS connection object).	2297	mutated later on (for example C<tls> will hold the TLS connection object).
1244		2298
1245	=item * other object member names are prefixed with an C<_>.	2299	=item * other object member names are prefixed with an C<_>.
1246		2300
1247	All object members not explicitly documented (internal use) are prefixed	2301	All object members not explicitly documented (internal use) are prefixed
…		…
1250		2304
1251	=item * all members not documented here and not prefixed with an underscore	2305	=item * all members not documented here and not prefixed with an underscore
1252	are free to use in subclasses.	2306	are free to use in subclasses.
1253		2307
1254	Of course, new versions of AnyEvent::Handle may introduce more "public"	2308	Of course, new versions of AnyEvent::Handle may introduce more "public"
1255	member variables, but thats just life, at least it is documented.	2309	member variables, but that's just life. At least it is documented.
1256		2310
1257	=back	2311	=back
1258		2312
1259	=head1 AUTHOR	2313	=head1 AUTHOR
1260		2314

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines