[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.64 by root, Fri Jun 6 11:01:17 2008 UTC vs.
Revision 1.118 by root, Thu Feb 12 17:33:38 2009 UTC

…		…
1	package AnyEvent::Handle;	1	package AnyEvent::Handle;
2		2
3	no warnings;	3	no warnings;
4	use strict;	4	use strict qw(subs vars);
5		5
6	use AnyEvent ();	6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);	7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();	8	use Scalar::Util ();
9	use Carp ();	9	use Carp ();
14		14
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		16
17	=cut	17	=cut
18		18
19	our $VERSION = 4.15;	19	our $VERSION = 4.34;
20		20
21	=head1 SYNOPSIS	21	=head1 SYNOPSIS
22		22
23	use AnyEvent;	23	use AnyEvent;
24	use AnyEvent::Handle;	24	use AnyEvent::Handle;
…		…
27		27
28	my $handle =	28	my $handle =
29	AnyEvent::Handle->new (	29	AnyEvent::Handle->new (
30	fh => \*STDIN,	30	fh => \*STDIN,
31	on_eof => sub {	31	on_eof => sub {
32	$cv->broadcast;	32	$cv->send;
33	},	33	},
34	);	34	);
35		35
36	# send some request line	36	# send some request line
37	$handle->push_write ("getinfo\015\012");	37	$handle->push_write ("getinfo\015\012");
…		…
49		49
50	This module is a helper module to make it easier to do event-based I/O on	50	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	51	filehandles. For utility functions for doing non-blocking connects and accepts
52	on sockets see L<AnyEvent::Util>.	52	on sockets see L<AnyEvent::Util>.
53		53
		54	The L<AnyEvent::Intro> tutorial contains some well-documented
		55	AnyEvent::Handle examples.
		56
54	In the following, when the documentation refers to of "bytes" then this	57	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	58	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	59	treatment of characters applies to this module as well.
57		60
58	All callbacks will be invoked with the handle object as their first	61	All callbacks will be invoked with the handle object as their first
…		…
70		73
71	=item fh => $filehandle [MANDATORY]	74	=item fh => $filehandle [MANDATORY]
72		75
73	The filehandle this L<AnyEvent::Handle> object will operate on.	76	The filehandle this L<AnyEvent::Handle> object will operate on.
74		77
75	NOTE: The filehandle will be set to non-blocking (using	78	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		80	that mode.
77		81
78	=item on_eof => $cb->($handle)	82	=item on_eof => $cb->($handle)
79		83
80	Set the callback to be called when an end-of-file condition is detcted,	84	Set the callback to be called when an end-of-file condition is detected,
81	i.e. in the case of a socket, when the other side has closed the	85	i.e. in the case of a socket, when the other side has closed the
82	connection cleanly.	86	connection cleanly.
83		87
		88	For sockets, this just means that the other side has stopped sending data,
		89	you can still try to write data, and, in fact, one can return from the EOF
		90	callback and continue writing data, as only the read part has been shut
		91	down.
		92
84	While not mandatory, it is highly recommended to set an eof callback,	93	While not mandatory, it is I<highly> recommended to set an EOF callback,
85	otherwise you might end up with a closed socket while you are still	94	otherwise you might end up with a closed socket while you are still
86	waiting for data.	95	waiting for data.
		96
		97	If an EOF condition has been detected but no C<on_eof> callback has been
		98	set, then a fatal error will be raised with C<$!> set to <0>.
87		99
88	=item on_error => $cb->($handle, $fatal)	100	=item on_error => $cb->($handle, $fatal)
89		101
90	This is the error callback, which is called when, well, some error	102	This is the error callback, which is called when, well, some error
91	occured, such as not being able to resolve the hostname, failure to	103	occured, such as not being able to resolve the hostname, failure to
92	connect or a read error.	104	connect or a read error.
93		105
94	Some errors are fatal (which is indicated by C<$fatal> being true). On	106	Some errors are fatal (which is indicated by C<$fatal> being true). On
95	fatal errors the handle object will be shut down and will not be	107	fatal errors the handle object will be shut down and will not be usable
		108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
		109	errors are an EOF condition with active (but unsatisifable) read watchers
		110	(C<EPIPE>) or I/O errors.
		111
96	usable. Non-fatal errors can be retried by simply returning, but it is	112	Non-fatal errors can be retried by simply returning, but it is recommended
97	recommended to simply ignore this parameter and instead abondon the handle	113	to simply ignore this parameter and instead abondon the handle object
98	object when this callback is invoked.	114	when this callback is invoked. Examples of non-fatal errors are timeouts
		115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
99		116
100	On callback entrance, the value of C<$!> contains the operating system	117	On callback entrance, the value of C<$!> contains the operating system
101	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
102		119
103	While not mandatory, it is I<highly> recommended to set this callback, as	120	While not mandatory, it is I<highly> recommended to set this callback, as
…		…
110	and no read request is in the queue (unlike read queue callbacks, this	127	and no read request is in the queue (unlike read queue callbacks, this
111	callback will only be called when at least one octet of data is in the	128	callback will only be called when at least one octet of data is in the
112	read buffer).	129	read buffer).
113		130
114	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
115	method or access the C<$handle->{rbuf}> member directly.	132	method or access the C<$handle->{rbuf}> member directly. Note that you
		133	must not enlarge or modify the read buffer, you can only remove data at
		134	the beginning from it.
116		135
117	When an EOF condition is detected then AnyEvent::Handle will first try to	136	When an EOF condition is detected then AnyEvent::Handle will first try to
118	feed all the remaining data to the queued callbacks and C<on_read> before	137	feed all the remaining data to the queued callbacks and C<on_read> before
119	calling the C<on_eof> callback. If no progress can be made, then a fatal	138	calling the C<on_eof> callback. If no progress can be made, then a fatal
120	error will be raised (with C<$!> set to C<EPIPE>).	139	error will be raised (with C<$!> set to C<EPIPE>).
…		…
124	This sets the callback that is called when the write buffer becomes empty	143	This sets the callback that is called when the write buffer becomes empty
125	(or when the callback is set and the buffer is empty already).	144	(or when the callback is set and the buffer is empty already).
126		145
127	To append to the write buffer, use the C<< ->push_write >> method.	146	To append to the write buffer, use the C<< ->push_write >> method.
128		147
		148	This callback is useful when you don't want to put all of your write data
		149	into the queue at once, for example, when you want to write the contents
		150	of some file to the socket you might not want to read the whole file into
		151	memory and push it into the queue, but instead only read more data from
		152	the file when the write queue becomes empty.
		153
129	=item timeout => $fractional_seconds	154	=item timeout => $fractional_seconds
130		155
131	If non-zero, then this enables an "inactivity" timeout: whenever this many	156	If non-zero, then this enables an "inactivity" timeout: whenever this many
132	seconds pass without a successful read or write on the underlying file	157	seconds pass without a successful read or write on the underlying file
133	handle, the C<on_timeout> callback will be invoked (and if that one is	158	handle, the C<on_timeout> callback will be invoked (and if that one is
134	missing, an C<ETIMEDOUT> error will be raised).	159	missing, a non-fatal C<ETIMEDOUT> error will be raised).
135		160
136	Note that timeout processing is also active when you currently do not have	161	Note that timeout processing is also active when you currently do not have
137	any outstanding read or write requests: If you plan to keep the connection	162	any outstanding read or write requests: If you plan to keep the connection
138	idle then you should disable the timout temporarily or ignore the timeout	163	idle then you should disable the timout temporarily or ignore the timeout
139	in the C<on_timeout> callback.	164	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		165	restart the timeout.
140		166
141	Zero (the default) disables this timeout.	167	Zero (the default) disables this timeout.
142		168
143	=item on_timeout => $cb->($handle)	169	=item on_timeout => $cb->($handle)
144		170
…		…
148		174
149	=item rbuf_max => <bytes>	175	=item rbuf_max => <bytes>
150		176
151	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	177	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
152	when the read buffer ever (strictly) exceeds this size. This is useful to	178	when the read buffer ever (strictly) exceeds this size. This is useful to
153	avoid denial-of-service attacks.	179	avoid some forms of denial-of-service attacks.
154		180
155	For example, a server accepting connections from untrusted sources should	181	For example, a server accepting connections from untrusted sources should
156	be configured to accept only so-and-so much data that it cannot act on	182	be configured to accept only so-and-so much data that it cannot act on
157	(for example, when expecting a line, an attacker could send an unlimited	183	(for example, when expecting a line, an attacker could send an unlimited
158	amount of data without a callback ever being called as long as the line	184	amount of data without a callback ever being called as long as the line
159	isn't finished).	185	isn't finished).
160		186
		187	=item autocork => <boolean>
		188
		189	When disabled (the default), then C<push_write> will try to immediately
		190	write the data to the handle, if possible. This avoids having to register
		191	a write watcher and wait for the next event loop iteration, but can
		192	be inefficient if you write multiple small chunks (on the wire, this
		193	disadvantage is usually avoided by your kernel's nagle algorithm, see
		194	C<no_delay>, but this option can save costly syscalls).
		195
		196	When enabled, then writes will always be queued till the next event loop
		197	iteration. This is efficient when you do many small writes per iteration,
		198	but less efficient when you do a single write only per iteration (or when
		199	the write buffer often is full). It also increases write latency.
		200
		201	=item no_delay => <boolean>
		202
		203	When doing small writes on sockets, your operating system kernel might
		204	wait a bit for more data before actually sending it out. This is called
		205	the Nagle algorithm, and usually it is beneficial.
		206
		207	In some situations you want as low a delay as possible, which can be
		208	accomplishd by setting this option to a true value.
		209
		210	The default is your opertaing system's default behaviour (most likely
		211	enabled), this option explicitly enables or disables it, if possible.
		212
161	=item read_size => <bytes>	213	=item read_size => <bytes>
162		214
163	The default read block size (the amount of bytes this module will try to read	215	The default read block size (the amount of bytes this module will
164	during each (loop iteration). Default: C<8192>.	216	try to read during each loop iteration, which affects memory
		217	requirements). Default: C<8192>.
165		218
166	=item low_water_mark => <bytes>	219	=item low_water_mark => <bytes>
167		220
168	Sets the amount of bytes (default: C<0>) that make up an "empty" write	221	Sets the amount of bytes (default: C<0>) that make up an "empty" write
169	buffer: If the write reaches this size or gets even samller it is	222	buffer: If the write reaches this size or gets even samller it is
170	considered empty.	223	considered empty.
171		224
		225	Sometimes it can be beneficial (for performance reasons) to add data to
		226	the write buffer before it is fully drained, but this is a rare case, as
		227	the operating system kernel usually buffers data as well, so the default
		228	is good in almost all cases.
		229
172	=item linger => <seconds>	230	=item linger => <seconds>
173		231
174	If non-zero (default: C<3600>), then the destructor of the	232	If non-zero (default: C<3600>), then the destructor of the
175	AnyEvent::Handle object will check wether there is still outstanding write	233	AnyEvent::Handle object will check whether there is still outstanding
176	data and will install a watcher that will write out this data. No errors	234	write data and will install a watcher that will write this data to the
177	will be reported (this mostly matches how the operating system treats	235	socket. No errors will be reported (this mostly matches how the operating
178	outstanding data at socket close time).	236	system treats outstanding data at socket close time).
179		237
180	This will not work for partial TLS data that could not yet been	238	This will not work for partial TLS data that could not be encoded
181	encoded. This data will be lost.	239	yet. This data will be lost. Calling the C<stoptls> method in time might
		240	help.
182		241
183	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object	242	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
184		243
185	When this parameter is given, it enables TLS (SSL) mode, that means it	244	When this parameter is given, it enables TLS (SSL) mode, that means
186	will start making tls handshake and will transparently encrypt/decrypt	245	AnyEvent will start a TLS handshake as soon as the conenction has been
187	data.	246	established and will transparently encrypt/decrypt data afterwards.
188		247
189	TLS mode requires Net::SSLeay to be installed (it will be loaded	248	TLS mode requires Net::SSLeay to be installed (it will be loaded
190	automatically when you try to create a TLS handle).	249	automatically when you try to create a TLS handle): this module doesn't
		250	have a dependency on that module, so if your module requires it, you have
		251	to add the dependency yourself.
191		252
192	For the TLS server side, use C<accept>, and for the TLS client side of a	253	Unlike TCP, TLS has a server and client side: for the TLS server side, use
193	connection, use C<connect> mode.	254	C<accept>, and for the TLS client side of a connection, use C<connect>
		255	mode.
194		256
195	You can also provide your own TLS connection object, but you have	257	You can also provide your own TLS connection object, but you have
196	to make sure that you call either C<Net::SSLeay::set_connect_state>	258	to make sure that you call either C<Net::SSLeay::set_connect_state>
197	or C<Net::SSLeay::set_accept_state> on it before you pass it to	259	or C<Net::SSLeay::set_accept_state> on it before you pass it to
198	AnyEvent::Handle.	260	AnyEvent::Handle.
199		261
		262	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		263	passing in the wrong integer will lead to certain crash. This most often
		264	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		265	segmentation fault.
		266
200	See the C<starttls> method if you need to start TLs negotiation later.	267	See the C<< ->starttls >> method for when need to start TLS negotiation later.
201		268
202	=item tls_ctx => $ssl_ctx	269	=item tls_ctx => $ssl_ctx
203		270
204	Use the given Net::SSLeay::CTX object to create the new TLS connection	271	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection
205	(unless a connection object was specified directly). If this parameter is	272	(unless a connection object was specified directly). If this parameter is
206	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	273	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
207		274
208	=item json => JSON or JSON::XS object	275	=item json => JSON or JSON::XS object
209		276
210	This is the json coder object used by the C<json> read and write types.	277	This is the json coder object used by the C<json> read and write types.
211		278
212	If you don't supply it, then AnyEvent::Handle will create and use a	279	If you don't supply it, then AnyEvent::Handle will create and use a
213	suitable one, which will write and expect UTF-8 encoded JSON texts.	280	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		281	texts.
214		282
215	Note that you are responsible to depend on the JSON module if you want to	283	Note that you are responsible to depend on the JSON module if you want to
216	use this functionality, as AnyEvent does not have a dependency itself.	284	use this functionality, as AnyEvent does not have a dependency itself.
217		285
218	=item filter_r => $cb
219
220	=item filter_w => $cb
221
222	These exist, but are undocumented at this time.
223
224	=back	286	=back
225		287
226	=cut	288	=cut
227		289
228	sub new {	290	sub new {
…		…
232		294
233	$self->{fh} or Carp::croak "mandatory argument fh is missing";	295	$self->{fh} or Carp::croak "mandatory argument fh is missing";
234		296
235	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	297	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
236		298
237	if ($self->{tls}) {
238	require Net::SSLeay;
239	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	299	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
240	}	300	if $self->{tls};
241		301
242	$self->{_activity} = AnyEvent->now;	302	$self->{_activity} = AnyEvent->now;
243	$self->_timeout;	303	$self->_timeout;
244		304
245	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	305	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};
		306	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
		307
		308	$self->start_read
		309	if $self->{on_read};
246		310
247	$self	311	$self
248	}	312	}
249		313
250	sub _shutdown {	314	sub _shutdown {
…		…
253	delete $self->{_tw};	317	delete $self->{_tw};
254	delete $self->{_rw};	318	delete $self->{_rw};
255	delete $self->{_ww};	319	delete $self->{_ww};
256	delete $self->{fh};	320	delete $self->{fh};
257		321
258	$self->stoptls;	322	&_freetls;
		323
		324	delete $self->{on_read};
		325	delete $self->{_queue};
259	}	326	}
260		327
261	sub _error {	328	sub _error {
262	my ($self, $errno, $fatal) = @_;	329	my ($self, $errno, $fatal) = @_;
263		330
…		…
266		333
267	$! = $errno;	334	$! = $errno;
268		335
269	if ($self->{on_error}) {	336	if ($self->{on_error}) {
270	$self->{on_error}($self, $fatal);	337	$self->{on_error}($self, $fatal);
271	} else {	338	} elsif ($self->{fh}) {
272	Carp::croak "AnyEvent::Handle uncaught error: $!";	339	Carp::croak "AnyEvent::Handle uncaught error: $!";
273	}	340	}
274	}	341	}
275		342
276	=item $fh = $handle->fh	343	=item $fh = $handle->fh
277		344
278	This method returns the file handle of the L<AnyEvent::Handle> object.	345	This method returns the file handle used to create the L<AnyEvent::Handle> object.
279		346
280	=cut	347	=cut
281		348
282	sub fh { $_[0]{fh} }	349	sub fh { $_[0]{fh} }
283		350
…		…
301	$_[0]{on_eof} = $_[1];	368	$_[0]{on_eof} = $_[1];
302	}	369	}
303		370
304	=item $handle->on_timeout ($cb)	371	=item $handle->on_timeout ($cb)
305		372
306	Replace the current C<on_timeout> callback, or disables the callback	373	Replace the current C<on_timeout> callback, or disables the callback (but
307	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor	374	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
308	argument.	375	argument and method.
309		376
310	=cut	377	=cut
311		378
312	sub on_timeout {	379	sub on_timeout {
313	$_[0]{on_timeout} = $_[1];	380	$_[0]{on_timeout} = $_[1];
		381	}
		382
		383	=item $handle->autocork ($boolean)
		384
		385	Enables or disables the current autocork behaviour (see C<autocork>
		386	constructor argument). Changes will only take effect on the next write.
		387
		388	=cut
		389
		390	sub autocork {
		391	$_[0]{autocork} = $_[1];
		392	}
		393
		394	=item $handle->no_delay ($boolean)
		395
		396	Enables or disables the C<no_delay> setting (see constructor argument of
		397	the same name for details).
		398
		399	=cut
		400
		401	sub no_delay {
		402	$_[0]{no_delay} = $_[1];
		403
		404	eval {
		405	local $SIG{__DIE__};
		406	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];
		407	};
314	}	408	}
315		409
316	#############################################################################	410	#############################################################################
317		411
318	=item $handle->timeout ($seconds)	412	=item $handle->timeout ($seconds)
…		…
396	my ($self, $cb) = @_;	490	my ($self, $cb) = @_;
397		491
398	$self->{on_drain} = $cb;	492	$self->{on_drain} = $cb;
399		493
400	$cb->($self)	494	$cb->($self)
401	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	495	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
402	}	496	}
403		497
404	=item $handle->push_write ($data)	498	=item $handle->push_write ($data)
405		499
406	Queues the given scalar to be written. You can push as much data as you	500	Queues the given scalar to be written. You can push as much data as you
…		…
423	substr $self->{wbuf}, 0, $len, "";	517	substr $self->{wbuf}, 0, $len, "";
424		518
425	$self->{_activity} = AnyEvent->now;	519	$self->{_activity} = AnyEvent->now;
426		520
427	$self->{on_drain}($self)	521	$self->{on_drain}($self)
428	if $self->{low_water_mark} >= length $self->{wbuf}	522	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
429	&& $self->{on_drain};	523	&& $self->{on_drain};
430		524
431	delete $self->{_ww} unless length $self->{wbuf};	525	delete $self->{_ww} unless length $self->{wbuf};
432	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	526	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
433	$self->_error ($!, 1);	527	$self->_error ($!, 1);
434	}	528	}
435	};	529	};
436		530
437	# try to write data immediately	531	# try to write data immediately
438	$cb->();	532	$cb->() unless $self->{autocork};
439		533
440	# if still data left in wbuf, we need to poll	534	# if still data left in wbuf, we need to poll
441	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	535	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)
442	if length $self->{wbuf};	536	if length $self->{wbuf};
443	};	537	};
…		…
457		551
458	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	552	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
459	->($self, @_);	553	->($self, @_);
460	}	554	}
461		555
462	if ($self->{filter_w}) {	556	if ($self->{tls}) {
463	$self->{filter_w}($self, \$_[0]);	557	$self->{_tls_wbuf} .= $_[0];
		558
		559	&_dotls ($self);
464	} else {	560	} else {
465	$self->{wbuf} .= $_[0];	561	$self->{wbuf} .= $_[0];
466	$self->_drain_wbuf;	562	$self->_drain_wbuf;
467	}	563	}
468	}	564	}
…		…
485	=cut	581	=cut
486		582
487	register_write_type netstring => sub {	583	register_write_type netstring => sub {
488	my ($self, $string) = @_;	584	my ($self, $string) = @_;
489		585
490	sprintf "%d:%s,", (length $string), $string	586	(length $string) . ":$string,"
491	};	587	};
492		588
493	=item packstring => $format, $data	589	=item packstring => $format, $data
494		590
495	An octet string prefixed with an encoded length. The encoding C<$format>	591	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
500	=cut	596	=cut
501		597
502	register_write_type packstring => sub {	598	register_write_type packstring => sub {
503	my ($self, $format, $string) = @_;	599	my ($self, $format, $string) = @_;
504		600
505	pack "$format/a", $string	601	pack "$format/a*", $string
506	};	602	};
507		603
508	=item json => $array_or_hashref	604	=item json => $array_or_hashref
509		605
510	Encodes the given hash or array reference into a JSON object. Unless you	606	Encodes the given hash or array reference into a JSON object. Unless you
…		…
556	register_write_type storable => sub {	652	register_write_type storable => sub {
557	my ($self, $ref) = @_;	653	my ($self, $ref) = @_;
558		654
559	require Storable;	655	require Storable;
560		656
561	pack "w/a", Storable::nfreeze ($ref)	657	pack "w/a*", Storable::nfreeze ($ref)
562	};	658	};
563		659
564	=back	660	=back
565		661
566	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	662	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
…		…
590	ways, the "simple" way, using only C<on_read> and the "complex" way, using	686	ways, the "simple" way, using only C<on_read> and the "complex" way, using
591	a queue.	687	a queue.
592		688
593	In the simple case, you just install an C<on_read> callback and whenever	689	In the simple case, you just install an C<on_read> callback and whenever
594	new data arrives, it will be called. You can then remove some data (if	690	new data arrives, it will be called. You can then remove some data (if
595	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	691	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
596	or not.	692	leave the data there if you want to accumulate more (e.g. when only a
		693	partial message has been received so far).
597		694
598	In the more complex case, you want to queue multiple callbacks. In this	695	In the more complex case, you want to queue multiple callbacks. In this
599	case, AnyEvent::Handle will call the first queued callback each time new	696	case, AnyEvent::Handle will call the first queued callback each time new
600	data arrives (also the first time it is queued) and removes it when it has	697	data arrives (also the first time it is queued) and removes it when it has
601	done its job (see C<push_read>, below).	698	done its job (see C<push_read>, below).
…		…
619	# handle xml	716	# handle xml
620	});	717	});
621	});	718	});
622	});	719	});
623		720
624	Example 2: Implement a client for a protocol that replies either with	721	Example 2: Implement a client for a protocol that replies either with "OK"
625	"OK" and another line or "ERROR" for one request, and 64 bytes for the	722	and another line or "ERROR" for the first request that is sent, and 64
626	second request. Due tot he availability of a full queue, we can just	723	bytes for the second request. Due to the availability of a queue, we can
627	pipeline sending both requests and manipulate the queue as necessary in	724	just pipeline sending both requests and manipulate the queue as necessary
628	the callbacks:	725	in the callbacks.
629		726
630	# request one	727	When the first callback is called and sees an "OK" response, it will
		728	C<unshift> another line-read. This line-read will be queued I<before> the
		729	64-byte chunk callback.
		730
		731	# request one, returns either "OK + extra line" or "ERROR"
631	$handle->push_write ("request 1\015\012");	732	$handle->push_write ("request 1\015\012");
632		733
633	# we expect "ERROR" or "OK" as response, so push a line read	734	# we expect "ERROR" or "OK" as response, so push a line read
634	$handle->push_read (line => sub {	735	$handle->push_read (line => sub {
635	# if we got an "OK", we have to _prepend_ another line,	736	# if we got an "OK", we have to _prepend_ another line,
…		…
642	...	743	...
643	});	744	});
644	}	745	}
645	});	746	});
646		747
647	# request two	748	# request two, simply returns 64 octets
648	$handle->push_write ("request 2\015\012");	749	$handle->push_write ("request 2\015\012");
649		750
650	# simply read 64 bytes, always	751	# simply read 64 bytes, always
651	$handle->push_read (chunk => 64, sub {	752	$handle->push_read (chunk => 64, sub {
652	my $response = $_[1];	753	my $response = $_[1];
…		…
664		765
665	if (	766	if (
666	defined $self->{rbuf_max}	767	defined $self->{rbuf_max}
667	&& $self->{rbuf_max} < length $self->{rbuf}	768	&& $self->{rbuf_max} < length $self->{rbuf}
668	) {	769	) {
669	return $self->_error (&Errno::ENOSPC, 1);	770	$self->_error (&Errno::ENOSPC, 1), return;
670	}	771	}
671		772
672	while () {	773	while () {
673	no strict 'refs';	774	# we need to use a separate tls read buffer, as we must not receive data while
		775	# we are draining the buffer, and this can only happen with TLS.
		776	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};
674		777
675	my $len = length $self->{rbuf};	778	my $len = length $self->{rbuf};
676		779
677	if (my $cb = shift @{ $self->{_queue} }) {	780	if (my $cb = shift @{ $self->{_queue} }) {
678	unless ($cb->($self)) {	781	unless ($cb->($self)) {
679	if ($self->{_eof}) {	782	if ($self->{_eof}) {
680	# no progress can be made (not enough data and no data forthcoming)	783	# no progress can be made (not enough data and no data forthcoming)
681	$self->_error (&Errno::EPIPE, 1), last;	784	$self->_error (&Errno::EPIPE, 1), return;
682	}	785	}
683		786
684	unshift @{ $self->{_queue} }, $cb;	787	unshift @{ $self->{_queue} }, $cb;
685	last;	788	last;
686	}	789	}
…		…
694	&& !@{ $self->{_queue} } # and the queue is still empty	797	&& !@{ $self->{_queue} } # and the queue is still empty
695	&& $self->{on_read} # but we still have on_read	798	&& $self->{on_read} # but we still have on_read
696	) {	799	) {
697	# no further data will arrive	800	# no further data will arrive
698	# so no progress can be made	801	# so no progress can be made
699	$self->_error (&Errno::EPIPE, 1), last	802	$self->_error (&Errno::EPIPE, 1), return
700	if $self->{_eof};	803	if $self->{_eof};
701		804
702	last; # more data might arrive	805	last; # more data might arrive
703	}	806	}
704	} else {	807	} else {
705	# read side becomes idle	808	# read side becomes idle
706	delete $self->{_rw};	809	delete $self->{_rw} unless $self->{tls};
707	last;	810	last;
708	}	811	}
709	}	812	}
710		813
		814	if ($self->{_eof}) {
		815	if ($self->{on_eof}) {
711	$self->{on_eof}($self)	816	$self->{on_eof}($self)
712	if $self->{_eof} && $self->{on_eof};	817	} else {
		818	$self->_error (0, 1);
		819	}
		820	}
713		821
714	# may need to restart read watcher	822	# may need to restart read watcher
715	unless ($self->{_rw}) {	823	unless ($self->{_rw}) {
716	$self->start_read	824	$self->start_read
717	if $self->{on_read} \|\| @{ $self->{_queue} };	825	if $self->{on_read} \|\| @{ $self->{_queue} };
…		…
735		843
736	=item $handle->rbuf	844	=item $handle->rbuf
737		845
738	Returns the read buffer (as a modifiable lvalue).	846	Returns the read buffer (as a modifiable lvalue).
739		847
740	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	848	You can access the read buffer directly as the C<< ->{rbuf} >>
741	you want.	849	member, if you want. However, the only operation allowed on the
		850	read buffer (apart from looking at it) is removing data from its
		851	beginning. Otherwise modifying or appending to it is not allowed and will
		852	lead to hard-to-track-down bugs.
742		853
743	NOTE: The read buffer should only be used or modified if the C<on_read>,	854	NOTE: The read buffer should only be used or modified if the C<on_read>,
744	C<push_read> or C<unshift_read> methods are used. The other read methods	855	C<push_read> or C<unshift_read> methods are used. The other read methods
745	automatically manage the read buffer.	856	automatically manage the read buffer.
746		857
…		…
843	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	954	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
844	1	955	1
845	}	956	}
846	};	957	};
847		958
848	# compatibility with older API
849	sub push_read_chunk {
850	$_[0]->push_read (chunk => $_[1], $_[2]);
851	}
852
853	sub unshift_read_chunk {
854	$_[0]->unshift_read (chunk => $_[1], $_[2]);
855	}
856
857	=item line => [$eol, ]$cb->($handle, $line, $eol)	959	=item line => [$eol, ]$cb->($handle, $line, $eol)
858		960
859	The callback will be called only once a full line (including the end of	961	The callback will be called only once a full line (including the end of
860	line marker, C<$eol>) has been read. This line (excluding the end of line	962	line marker, C<$eol>) has been read. This line (excluding the end of line
861	marker) will be passed to the callback as second argument (C<$line>), and	963	marker) will be passed to the callback as second argument (C<$line>), and
…		…
876	=cut	978	=cut
877		979
878	register_read_type line => sub {	980	register_read_type line => sub {
879	my ($self, $cb, $eol) = @_;	981	my ($self, $cb, $eol) = @_;
880		982
881	$eol = qr\|(\015?\012)\| if @_ < 3;	983	if (@_ < 3) {
		984	# this is more than twice as fast as the generic code below
		985	sub {
		986	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
		987
		988	$cb->($_[0], $1, $2);
		989	1
		990	}
		991	} else {
882	$eol = quotemeta $eol unless ref $eol;	992	$eol = quotemeta $eol unless ref $eol;
883	$eol = qr\|^(.*?)($eol)\|s;	993	$eol = qr\|^(.*?)($eol)\|s;
884		994
885	sub {	995	sub {
886	$_[0]{rbuf} =~ s/$eol// or return;	996	$_[0]{rbuf} =~ s/$eol// or return;
887		997
888	$cb->($_[0], $1, $2);	998	$cb->($_[0], $1, $2);
		999	1
889	1	1000	}
890	}	1001	}
891	};	1002	};
892
893	# compatibility with older API
894	sub push_read_line {
895	my $self = shift;
896	$self->push_read (line => @_);
897	}
898
899	sub unshift_read_line {
900	my $self = shift;
901	$self->unshift_read (line => @_);
902	}
903		1003
904	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1004	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
905		1005
906	Makes a regex match against the regex object C<$accept> and returns	1006	Makes a regex match against the regex object C<$accept> and returns
907	everything up to and including the match.	1007	everything up to and including the match.
…		…
1012	An octet string prefixed with an encoded length. The encoding C<$format>	1112	An octet string prefixed with an encoded length. The encoding C<$format>
1013	uses the same format as a Perl C<pack> format, but must specify a single	1113	uses the same format as a Perl C<pack> format, but must specify a single
1014	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1114	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1015	optional C<!>, C<< < >> or C<< > >> modifier).	1115	optional C<!>, C<< < >> or C<< > >> modifier).
1016		1116
1017	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1117	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1118	EPP uses a prefix of C<N> (4 octtes).
1018		1119
1019	Example: read a block of data prefixed by its length in BER-encoded	1120	Example: read a block of data prefixed by its length in BER-encoded
1020	format (very efficient).	1121	format (very efficient).
1021		1122
1022	$handle->push_read (packstring => "w", sub {	1123	$handle->push_read (packstring => "w", sub {
…		…
1028	register_read_type packstring => sub {	1129	register_read_type packstring => sub {
1029	my ($self, $cb, $format) = @_;	1130	my ($self, $cb, $format) = @_;
1030		1131
1031	sub {	1132	sub {
1032	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1133	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1033	defined (my $len = eval { unpack $format, $_[0]->{rbuf} })	1134	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
1034	or return;	1135	or return;
1035		1136
		1137	$format = length pack $format, $len;
		1138
		1139	# bypass unshift if we already have the remaining chunk
		1140	if ($format + $len <= length $_[0]{rbuf}) {
		1141	my $data = substr $_[0]{rbuf}, $format, $len;
		1142	substr $_[0]{rbuf}, 0, $format + $len, "";
		1143	$cb->($_[0], $data);
		1144	} else {
1036	# remove prefix	1145	# remove prefix
1037	substr $_[0]->{rbuf}, 0, (length pack $format, $len), "";	1146	substr $_[0]{rbuf}, 0, $format, "";
1038		1147
1039	# read rest	1148	# read remaining chunk
1040	$_[0]->unshift_read (chunk => $len, $cb);	1149	$_[0]->unshift_read (chunk => $len, $cb);
		1150	}
1041		1151
1042	1	1152	1
1043	}	1153	}
1044	};	1154	};
1045		1155
1046	=item json => $cb->($handle, $hash_or_arrayref)	1156	=item json => $cb->($handle, $hash_or_arrayref)
1047		1157
1048	Reads a JSON object or array, decodes it and passes it to the callback.	1158	Reads a JSON object or array, decodes it and passes it to the
		1159	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1049		1160
1050	If a C<json> object was passed to the constructor, then that will be used	1161	If a C<json> object was passed to the constructor, then that will be used
1051	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1162	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1052		1163
1053	This read type uses the incremental parser available with JSON version	1164	This read type uses the incremental parser available with JSON version
…		…
1070	my $rbuf = \$self->{rbuf};	1181	my $rbuf = \$self->{rbuf};
1071		1182
1072	my $json = $self->{json} \|\|= JSON->new->utf8;	1183	my $json = $self->{json} \|\|= JSON->new->utf8;
1073		1184
1074	sub {	1185	sub {
1075	my $ref = $json->incr_parse ($self->{rbuf});	1186	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1076		1187
1077	if ($ref) {	1188	if ($ref) {
1078	$self->{rbuf} = $json->incr_text;	1189	$self->{rbuf} = $json->incr_text;
1079	$json->incr_text = "";	1190	$json->incr_text = "";
1080	$cb->($self, $ref);	1191	$cb->($self, $ref);
1081		1192
1082	1	1193	1
		1194	} elsif ($@) {
		1195	# error case
		1196	$json->incr_skip;
		1197
		1198	$self->{rbuf} = $json->incr_text;
		1199	$json->incr_text = "";
		1200
		1201	$self->_error (&Errno::EBADMSG);
		1202
		1203	()
1083	} else {	1204	} else {
1084	$self->{rbuf} = "";	1205	$self->{rbuf} = "";
		1206
1085	()	1207	()
1086	}	1208	}
1087	}	1209	}
1088	};	1210	};
1089		1211
…		…
1102		1224
1103	require Storable;	1225	require Storable;
1104		1226
1105	sub {	1227	sub {
1106	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1228	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1107	defined (my $len = eval { unpack "w", $_[0]->{rbuf} })	1229	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
1108	or return;	1230	or return;
1109		1231
		1232	my $format = length pack "w", $len;
		1233
		1234	# bypass unshift if we already have the remaining chunk
		1235	if ($format + $len <= length $_[0]{rbuf}) {
		1236	my $data = substr $_[0]{rbuf}, $format, $len;
		1237	substr $_[0]{rbuf}, 0, $format + $len, "";
		1238	$cb->($_[0], Storable::thaw ($data));
		1239	} else {
1110	# remove prefix	1240	# remove prefix
1111	substr $_[0]->{rbuf}, 0, (length pack "w", $len), "";	1241	substr $_[0]{rbuf}, 0, $format, "";
1112		1242
1113	# read rest	1243	# read remaining chunk
1114	$_[0]->unshift_read (chunk => $len, sub {	1244	$_[0]->unshift_read (chunk => $len, sub {
1115	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1245	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1116	$cb->($_[0], $ref);	1246	$cb->($_[0], $ref);
1117	} else {	1247	} else {
1118	$self->_error (&Errno::EBADMSG);	1248	$self->_error (&Errno::EBADMSG);
		1249	}
1119	}	1250	});
1120	});	1251	}
		1252
		1253	1
1121	}	1254	}
1122	};	1255	};
1123		1256
1124	=back	1257	=back
1125		1258
…		…
1155	Note that AnyEvent::Handle will automatically C<start_read> for you when	1288	Note that AnyEvent::Handle will automatically C<start_read> for you when
1156	you change the C<on_read> callback or push/unshift a read callback, and it	1289	you change the C<on_read> callback or push/unshift a read callback, and it
1157	will automatically C<stop_read> for you when neither C<on_read> is set nor	1290	will automatically C<stop_read> for you when neither C<on_read> is set nor
1158	there are any read requests in the queue.	1291	there are any read requests in the queue.
1159		1292
		1293	These methods will have no effect when in TLS mode (as TLS doesn't support
		1294	half-duplex connections).
		1295
1160	=cut	1296	=cut
1161		1297
1162	sub stop_read {	1298	sub stop_read {
1163	my ($self) = @_;	1299	my ($self) = @_;
1164		1300
1165	delete $self->{_rw};	1301	delete $self->{_rw} unless $self->{tls};
1166	}	1302	}
1167		1303
1168	sub start_read {	1304	sub start_read {
1169	my ($self) = @_;	1305	my ($self) = @_;
1170		1306
1171	unless ($self->{_rw} \|\| $self->{_eof}) {	1307	unless ($self->{_rw} \|\| $self->{_eof}) {
1172	Scalar::Util::weaken $self;	1308	Scalar::Util::weaken $self;
1173		1309
1174	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1310	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
1175	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1311	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1176	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;	1312	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;
1177		1313
1178	if ($len > 0) {	1314	if ($len > 0) {
1179	$self->{_activity} = AnyEvent->now;	1315	$self->{_activity} = AnyEvent->now;
1180		1316
1181	$self->{filter_r}	1317	if ($self->{tls}) {
1182	? $self->{filter_r}($self, $rbuf)	1318	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1183	: $self->{_in_drain} \|\| $self->_drain_rbuf;	1319
		1320	&_dotls ($self);
		1321	} else {
		1322	$self->_drain_rbuf unless $self->{_in_drain};
		1323	}
1184		1324
1185	} elsif (defined $len) {	1325	} elsif (defined $len) {
1186	delete $self->{_rw};	1326	delete $self->{_rw};
1187	$self->{_eof} = 1;	1327	$self->{_eof} = 1;
1188	$self->_drain_rbuf unless $self->{_in_drain};	1328	$self->_drain_rbuf unless $self->{_in_drain};
…		…
1192	}	1332	}
1193	});	1333	});
1194	}	1334	}
1195	}	1335	}
1196		1336
		1337	# poll the write BIO and send the data if applicable
1197	sub _dotls {	1338	sub _dotls {
1198	my ($self) = @_;	1339	my ($self) = @_;
1199		1340
1200	my $buf;	1341	my $tmp;
1201		1342
1202	if (length $self->{_tls_wbuf}) {	1343	if (length $self->{_tls_wbuf}) {
1203	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1344	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1204	substr $self->{_tls_wbuf}, 0, $len, "";	1345	substr $self->{_tls_wbuf}, 0, $tmp, "";
1205	}	1346	}
1206	}	1347	}
1207		1348
1208	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1209	$self->{wbuf} .= $buf;
1210	$self->_drain_wbuf;
1211	}
1212
1213	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1349	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1214	if (length $buf) {	1350	unless (length $tmp) {
1215	$self->{rbuf} .= $buf;
1216	$self->_drain_rbuf unless $self->{_in_drain};
1217	} else {
1218	# let's treat SSL-eof as we treat normal EOF	1351	# let's treat SSL-eof as we treat normal EOF
		1352	delete $self->{_rw};
1219	$self->{_eof} = 1;	1353	$self->{_eof} = 1;
1220	$self->_shutdown;	1354	&_freetls;
1221	return;
1222	}	1355	}
1223	}
1224		1356
		1357	$self->{_tls_rbuf} .= $tmp;
		1358	$self->_drain_rbuf unless $self->{_in_drain};
		1359	$self->{tls} or return; # tls session might have gone away in callback
		1360	}
		1361
1225	my $err = Net::SSLeay::get_error ($self->{tls}, -1);	1362	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1226		1363
1227	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {	1364	if ($tmp != Net::SSLeay::ERROR_WANT_READ ()) {
1228	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {	1365	if ($tmp == Net::SSLeay::ERROR_SYSCALL ()) {
1229	return $self->_error ($!, 1);	1366	return $self->_error ($!, 1);
1230	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {	1367	} elsif ($tmp == Net::SSLeay::ERROR_SSL ()) {
1231	return $self->_error (&Errno::EIO, 1);	1368	return $self->_error (&Errno::EIO, 1);
1232	}	1369	}
1233		1370
1234	# all others are fine for our purposes	1371	# all other errors are fine for our purposes
		1372	}
		1373
		1374	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
		1375	$self->{wbuf} .= $tmp;
		1376	$self->_drain_wbuf;
1235	}	1377	}
1236	}	1378	}
1237		1379
1238	=item $handle->starttls ($tls[, $tls_ctx])	1380	=item $handle->starttls ($tls[, $tls_ctx])
1239		1381
…		…
1249		1391
1250	The TLS connection object will end up in C<< $handle->{tls} >> after this	1392	The TLS connection object will end up in C<< $handle->{tls} >> after this
1251	call and can be used or changed to your liking. Note that the handshake	1393	call and can be used or changed to your liking. Note that the handshake
1252	might have already started when this function returns.	1394	might have already started when this function returns.
1253		1395
		1396	If it an error to start a TLS handshake more than once per
		1397	AnyEvent::Handle object (this is due to bugs in OpenSSL).
		1398
1254	=cut	1399	=cut
1255		1400
1256	sub starttls {	1401	sub starttls {
1257	my ($self, $ssl, $ctx) = @_;	1402	my ($self, $ssl, $ctx) = @_;
1258		1403
1259	$self->stoptls;	1404	require Net::SSLeay;
1260		1405
		1406	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"
		1407	if $self->{tls};
		1408
1261	if ($ssl eq "accept") {	1409	if ($ssl eq "accept") {
1262	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1410	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());
1263	Net::SSLeay::set_accept_state ($ssl);	1411	Net::SSLeay::set_accept_state ($ssl);
1264	} elsif ($ssl eq "connect") {	1412	} elsif ($ssl eq "connect") {
1265	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1413	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());
…		…
1271	# basically, this is deep magic (because SSL_read should have the same issues)	1419	# basically, this is deep magic (because SSL_read should have the same issues)
1272	# but the openssl maintainers basically said: "trust us, it just works".	1420	# but the openssl maintainers basically said: "trust us, it just works".
1273	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1421	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1274	# and mismaintained ssleay-module doesn't even offer them).	1422	# and mismaintained ssleay-module doesn't even offer them).
1275	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1423	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1424	#
		1425	# in short: this is a mess.
		1426	#
		1427	# note that we do not try to keep the length constant between writes as we are required to do.
		1428	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1429	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1430	# have identity issues in that area.
1276	Net::SSLeay::CTX_set_mode ($self->{tls},	1431	Net::SSLeay::CTX_set_mode ($self->{tls},
1277	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)	1432	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)
1278	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));	1433	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));
1279		1434
1280	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1435	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1281	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1436	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1282		1437
1283	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1438	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});
1284		1439
1285	$self->{filter_w} = sub {	1440	&_dotls; # need to trigger the initial handshake
1286	$_[0]{_tls_wbuf} .= ${$_[1]};	1441	$self->start_read; # make sure we actually do read
1287	&_dotls;
1288	};
1289	$self->{filter_r} = sub {
1290	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1291	&_dotls;
1292	};
1293	}	1442	}
1294		1443
1295	=item $handle->stoptls	1444	=item $handle->stoptls
1296		1445
1297	Destroys the SSL connection, if any. Partial read or write data will be	1446	Shuts down the SSL connection - this makes a proper EOF handshake by
1298	lost.	1447	sending a close notify to the other side, but since OpenSSL doesn't
		1448	support non-blocking shut downs, it is not possible to re-use the stream
		1449	afterwards.
1299		1450
1300	=cut	1451	=cut
1301		1452
1302	sub stoptls {	1453	sub stoptls {
1303	my ($self) = @_;	1454	my ($self) = @_;
1304		1455
		1456	if ($self->{tls}) {
		1457	Net::SSLeay::shutdown ($self->{tls});
		1458
		1459	&_dotls;
		1460
		1461	# we don't give a shit. no, we do, but we can't. no...
		1462	# we, we... have to use openssl :/
		1463	&_freetls;
		1464	}
		1465	}
		1466
		1467	sub _freetls {
		1468	my ($self) = @_;
		1469
		1470	return unless $self->{tls};
		1471
1305	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1472	Net::SSLeay::free (delete $self->{tls});
1306		1473
1307	delete $self->{_rbio};	1474	delete @$self{qw(_rbio _wbio _tls_wbuf)};
1308	delete $self->{_wbio};
1309	delete $self->{_tls_wbuf};
1310	delete $self->{filter_r};
1311	delete $self->{filter_w};
1312	}	1475	}
1313		1476
1314	sub DESTROY {	1477	sub DESTROY {
1315	my $self = shift;	1478	my $self = shift;
1316		1479
1317	$self->stoptls;	1480	&_freetls;
1318		1481
1319	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1482	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1320		1483
1321	if ($linger && length $self->{wbuf}) {	1484	if ($linger && length $self->{wbuf}) {
1322	my $fh = delete $self->{fh};	1485	my $fh = delete $self->{fh};
…		…
1337	@linger = ();	1500	@linger = ();
1338	});	1501	});
1339	}	1502	}
1340	}	1503	}
1341		1504
		1505	=item $handle->destroy
		1506
		1507	Shuts down the handle object as much as possible - this call ensures that
		1508	no further callbacks will be invoked and resources will be freed as much
		1509	as possible. You must not call any methods on the object afterwards.
		1510
		1511	Normally, you can just "forget" any references to an AnyEvent::Handle
		1512	object and it will simply shut down. This works in fatal error and EOF
		1513	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1514	callback, so when you want to destroy the AnyEvent::Handle object from
		1515	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1516	that case.
		1517
		1518	The handle might still linger in the background and write out remaining
		1519	data, as specified by the C<linger> option, however.
		1520
		1521	=cut
		1522
		1523	sub destroy {
		1524	my ($self) = @_;
		1525
		1526	$self->DESTROY;
		1527	%$self = ();
		1528	}
		1529
1342	=item AnyEvent::Handle::TLS_CTX	1530	=item AnyEvent::Handle::TLS_CTX
1343		1531
1344	This function creates and returns the Net::SSLeay::CTX object used by	1532	This function creates and returns the Net::SSLeay::CTX object used by
1345	default for TLS mode.	1533	default for TLS mode.
1346		1534
…		…
1374	}	1562	}
1375	}	1563	}
1376		1564
1377	=back	1565	=back
1378		1566
		1567
		1568	=head1 NONFREQUENTLY ASKED QUESTIONS
		1569
		1570	=over 4
		1571
		1572	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1573	still get further invocations!
		1574
		1575	That's because AnyEvent::Handle keeps a reference to itself when handling
		1576	read or write callbacks.
		1577
		1578	It is only safe to "forget" the reference inside EOF or error callbacks,
		1579	from within all other callbacks, you need to explicitly call the C<<
		1580	->destroy >> method.
		1581
		1582	=item I get different callback invocations in TLS mode/Why can't I pause
		1583	reading?
		1584
		1585	Unlike, say, TCP, TLS connections do not consist of two independent
		1586	communication channels, one for each direction. Or put differently. The
		1587	read and write directions are not independent of each other: you cannot
		1588	write data unless you are also prepared to read, and vice versa.
		1589
		1590	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		1591	callback invocations when you are not expecting any read data - the reason
		1592	is that AnyEvent::Handle always reads in TLS mode.
		1593
		1594	During the connection, you have to make sure that you always have a
		1595	non-empty read-queue, or an C<on_read> watcher. At the end of the
		1596	connection (or when you no longer want to use it) you can call the
		1597	C<destroy> method.
		1598
		1599	=item How do I read data until the other side closes the connection?
		1600
		1601	If you just want to read your data into a perl scalar, the easiest way
		1602	to achieve this is by setting an C<on_read> callback that does nothing,
		1603	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		1604	will be in C<$_[0]{rbuf}>:
		1605
		1606	$handle->on_read (sub { });
		1607	$handle->on_eof (undef);
		1608	$handle->on_error (sub {
		1609	my $data = delete $_[0]{rbuf};
		1610	undef $handle;
		1611	});
		1612
		1613	The reason to use C<on_error> is that TCP connections, due to latencies
		1614	and packets loss, might get closed quite violently with an error, when in
		1615	fact, all data has been received.
		1616
		1617	It is usually better to use acknowledgements when transferring data,
		1618	to make sure the other side hasn't just died and you got the data
		1619	intact. This is also one reason why so many internet protocols have an
		1620	explicit QUIT command.
		1621
		1622	=item I don't want to destroy the handle too early - how do I wait until
		1623	all data has been written?
		1624
		1625	After writing your last bits of data, set the C<on_drain> callback
		1626	and destroy the handle in there - with the default setting of
		1627	C<low_water_mark> this will be called precisely when all data has been
		1628	written to the socket:
		1629
		1630	$handle->push_write (...);
		1631	$handle->on_drain (sub {
		1632	warn "all data submitted to the kernel\n";
		1633	undef $handle;
		1634	});
		1635
		1636	=back
		1637
		1638
1379	=head1 SUBCLASSING AnyEvent::Handle	1639	=head1 SUBCLASSING AnyEvent::Handle
1380		1640
1381	In many cases, you might want to subclass AnyEvent::Handle.	1641	In many cases, you might want to subclass AnyEvent::Handle.
1382		1642
1383	To make this easier, a given version of AnyEvent::Handle uses these	1643	To make this easier, a given version of AnyEvent::Handle uses these
…		…
1386	=over 4	1646	=over 4
1387		1647
1388	=item * all constructor arguments become object members.	1648	=item * all constructor arguments become object members.
1389		1649
1390	At least initially, when you pass a C<tls>-argument to the constructor it	1650	At least initially, when you pass a C<tls>-argument to the constructor it
1391	will end up in C<< $handle->{tls} >>. Those members might be changes or	1651	will end up in C<< $handle->{tls} >>. Those members might be changed or
1392	mutated later on (for example C<tls> will hold the TLS connection object).	1652	mutated later on (for example C<tls> will hold the TLS connection object).
1393		1653
1394	=item * other object member names are prefixed with an C<_>.	1654	=item * other object member names are prefixed with an C<_>.
1395		1655
1396	All object members not explicitly documented (internal use) are prefixed	1656	All object members not explicitly documented (internal use) are prefixed

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.64 by root, Fri Jun 6 11:01:17 2008 UTC vs. Revision 1.118 by root, Thu Feb 12 17:33:38 2009 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.64 by root, Fri Jun 6 11:01:17 2008 UTC vs.
Revision 1.118 by root, Thu Feb 12 17:33:38 2009 UTC