[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.12 by elmex, Thu May 15 09:03:43 2008 UTC vs.
Revision 1.64 by root, Fri Jun 6 11:01:17 2008 UTC

…		…
2		2
3	no warnings;	3	no warnings;
4	use strict;	4	use strict;
5		5
6	use AnyEvent ();	6	use AnyEvent ();
7	use AnyEvent::Util ();	7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();	8	use Scalar::Util ();
9	use Carp ();	9	use Carp ();
10	use Fcntl ();	10	use Fcntl ();
11	use Errno qw/EAGAIN EINTR/;	11	use Errno qw(EAGAIN EINTR);
12		12
13	=head1 NAME	13	=head1 NAME
14		14
15	AnyEvent::Handle - non-blocking I/O on filehandles via AnyEvent	15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		16
17	=cut	17	=cut
18		18
19	our $VERSION = '0.02';	19	our $VERSION = 4.15;
20		20
21	=head1 SYNOPSIS	21	=head1 SYNOPSIS
22		22
23	use AnyEvent;	23	use AnyEvent;
24	use AnyEvent::Handle;	24	use AnyEvent::Handle;
25		25
26	my $cv = AnyEvent->condvar;	26	my $cv = AnyEvent->condvar;
27		27
28	my $ae_fh = AnyEvent::Handle->new (fh => \*STDIN);	28	my $handle =
29
30	#TODO
31
32	# or use the constructor to pass the callback:
33
34	my $ae_fh2 =
35	AnyEvent::Handle->new (	29	AnyEvent::Handle->new (
36	fh => \*STDIN,	30	fh => \*STDIN,
37	on_eof => sub {	31	on_eof => sub {
38	$cv->broadcast;	32	$cv->broadcast;
39	},	33	},
40	#TODO
41	);	34	);
42		35
43	$cv->wait;	36	# send some request line
		37	$handle->push_write ("getinfo\015\012");
		38
		39	# read the response line
		40	$handle->push_read (line => sub {
		41	my ($handle, $line) = @_;
		42	warn "read line <$line>\n";
		43	$cv->send;
		44	});
		45
		46	$cv->recv;
44		47
45	=head1 DESCRIPTION	48	=head1 DESCRIPTION
46		49
47	This module is a helper module to make it easier to do event-based I/O on	50	This module is a helper module to make it easier to do event-based I/O on
48	filehandles (and sockets, see L<AnyEvent::Socket> for an easy way to make	51	filehandles. For utility functions for doing non-blocking connects and accepts
49	non-blocking resolves and connects).	52	on sockets see L<AnyEvent::Util>.
50		53
51	In the following, when the documentation refers to of "bytes" then this	54	In the following, when the documentation refers to of "bytes" then this
52	means characters. As sysread and syswrite are used for all I/O, their	55	means characters. As sysread and syswrite are used for all I/O, their
53	treatment of characters applies to this module as well.	56	treatment of characters applies to this module as well.
54		57
…		…
70	The filehandle this L<AnyEvent::Handle> object will operate on.	73	The filehandle this L<AnyEvent::Handle> object will operate on.
71		74
72	NOTE: The filehandle will be set to non-blocking (using	75	NOTE: The filehandle will be set to non-blocking (using
73	AnyEvent::Util::fh_nonblocking).	76	AnyEvent::Util::fh_nonblocking).
74		77
75	=item on_eof => $cb->($self) [MANDATORY]
76
77	Set the callback to be called on EOF.
78
79	=item on_error => $cb->($self)	78	=item on_eof => $cb->($handle)
80		79
		80	Set the callback to be called when an end-of-file condition is detcted,
		81	i.e. in the case of a socket, when the other side has closed the
		82	connection cleanly.
		83
		84	While not mandatory, it is highly recommended to set an eof callback,
		85	otherwise you might end up with a closed socket while you are still
		86	waiting for data.
		87
		88	=item on_error => $cb->($handle, $fatal)
		89
81	This is the fatal error callback, that is called when, well, a fatal error	90	This is the error callback, which is called when, well, some error
82	ocurs, such as not being able to resolve the hostname, failure to connect	91	occured, such as not being able to resolve the hostname, failure to
83	or a read error.	92	connect or a read error.
84		93
85	The object will not be in a usable state when this callback has been	94	Some errors are fatal (which is indicated by C<$fatal> being true). On
86	called.	95	fatal errors the handle object will be shut down and will not be
		96	usable. Non-fatal errors can be retried by simply returning, but it is
		97	recommended to simply ignore this parameter and instead abondon the handle
		98	object when this callback is invoked.
87		99
88	On callback entrance, the value of C<$!> contains the operating system	100	On callback entrance, the value of C<$!> contains the operating system
89	error (or C<ENOSPC> or C<EPIPE>).	101	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
90		102
91	While not mandatory, it is I<highly> recommended to set this callback, as	103	While not mandatory, it is I<highly> recommended to set this callback, as
92	you will not be notified of errors otherwise. The default simply calls	104	you will not be notified of errors otherwise. The default simply calls
93	die.	105	C<croak>.
94		106
95	=item on_read => $cb->($self)	107	=item on_read => $cb->($handle)
96		108
97	This sets the default read callback, which is called when data arrives	109	This sets the default read callback, which is called when data arrives
98	and no read request is in the queue.	110	and no read request is in the queue (unlike read queue callbacks, this
		111	callback will only be called when at least one octet of data is in the
		112	read buffer).
99		113
100	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	114	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
101	method or acces sthe C<$self->{rbuf}> member directly.	115	method or access the C<$handle->{rbuf}> member directly.
102		116
103	When an EOF condition is detected then AnyEvent::Handle will first try to	117	When an EOF condition is detected then AnyEvent::Handle will first try to
104	feed all the remaining data to the queued callbacks and C<on_read> before	118	feed all the remaining data to the queued callbacks and C<on_read> before
105	calling the C<on_eof> callback. If no progress can be made, then a fatal	119	calling the C<on_eof> callback. If no progress can be made, then a fatal
106	error will be raised (with C<$!> set to C<EPIPE>).	120	error will be raised (with C<$!> set to C<EPIPE>).
107		121
108	=item on_drain => $cb->()	122	=item on_drain => $cb->($handle)
109		123
110	This sets the callback that is called when the write buffer becomes empty	124	This sets the callback that is called when the write buffer becomes empty
111	(or when the callback is set and the buffer is empty already).	125	(or when the callback is set and the buffer is empty already).
112		126
113	To append to the write buffer, use the C<< ->push_write >> method.	127	To append to the write buffer, use the C<< ->push_write >> method.
		128
		129	=item timeout => $fractional_seconds
		130
		131	If non-zero, then this enables an "inactivity" timeout: whenever this many
		132	seconds pass without a successful read or write on the underlying file
		133	handle, the C<on_timeout> callback will be invoked (and if that one is
		134	missing, an C<ETIMEDOUT> error will be raised).
		135
		136	Note that timeout processing is also active when you currently do not have
		137	any outstanding read or write requests: If you plan to keep the connection
		138	idle then you should disable the timout temporarily or ignore the timeout
		139	in the C<on_timeout> callback.
		140
		141	Zero (the default) disables this timeout.
		142
		143	=item on_timeout => $cb->($handle)
		144
		145	Called whenever the inactivity timeout passes. If you return from this
		146	callback, then the timeout will be reset as if some activity had happened,
		147	so this condition is not fatal in any way.
114		148
115	=item rbuf_max => <bytes>	149	=item rbuf_max => <bytes>
116		150
117	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	151	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
118	when the read buffer ever (strictly) exceeds this size. This is useful to	152	when the read buffer ever (strictly) exceeds this size. This is useful to
…		…
125	isn't finished).	159	isn't finished).
126		160
127	=item read_size => <bytes>	161	=item read_size => <bytes>
128		162
129	The default read block size (the amount of bytes this module will try to read	163	The default read block size (the amount of bytes this module will try to read
130	on each [loop iteration). Default: C<4096>.	164	during each (loop iteration). Default: C<8192>.
131		165
132	=item low_water_mark => <bytes>	166	=item low_water_mark => <bytes>
133		167
134	Sets the amount of bytes (default: C<0>) that make up an "empty" write	168	Sets the amount of bytes (default: C<0>) that make up an "empty" write
135	buffer: If the write reaches this size or gets even samller it is	169	buffer: If the write reaches this size or gets even samller it is
136	considered empty.	170	considered empty.
137		171
		172	=item linger => <seconds>
		173
		174	If non-zero (default: C<3600>), then the destructor of the
		175	AnyEvent::Handle object will check wether there is still outstanding write
		176	data and will install a watcher that will write out this data. No errors
		177	will be reported (this mostly matches how the operating system treats
		178	outstanding data at socket close time).
		179
		180	This will not work for partial TLS data that could not yet been
		181	encoded. This data will be lost.
		182
		183	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
		184
		185	When this parameter is given, it enables TLS (SSL) mode, that means it
		186	will start making tls handshake and will transparently encrypt/decrypt
		187	data.
		188
		189	TLS mode requires Net::SSLeay to be installed (it will be loaded
		190	automatically when you try to create a TLS handle).
		191
		192	For the TLS server side, use C<accept>, and for the TLS client side of a
		193	connection, use C<connect> mode.
		194
		195	You can also provide your own TLS connection object, but you have
		196	to make sure that you call either C<Net::SSLeay::set_connect_state>
		197	or C<Net::SSLeay::set_accept_state> on it before you pass it to
		198	AnyEvent::Handle.
		199
		200	See the C<starttls> method if you need to start TLs negotiation later.
		201
		202	=item tls_ctx => $ssl_ctx
		203
		204	Use the given Net::SSLeay::CTX object to create the new TLS connection
		205	(unless a connection object was specified directly). If this parameter is
		206	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
		207
		208	=item json => JSON or JSON::XS object
		209
		210	This is the json coder object used by the C<json> read and write types.
		211
		212	If you don't supply it, then AnyEvent::Handle will create and use a
		213	suitable one, which will write and expect UTF-8 encoded JSON texts.
		214
		215	Note that you are responsible to depend on the JSON module if you want to
		216	use this functionality, as AnyEvent does not have a dependency itself.
		217
		218	=item filter_r => $cb
		219
		220	=item filter_w => $cb
		221
		222	These exist, but are undocumented at this time.
		223
138	=back	224	=back
139		225
140	=cut	226	=cut
141		227
142	sub new {	228	sub new {
…		…
146		232
147	$self->{fh} or Carp::croak "mandatory argument fh is missing";	233	$self->{fh} or Carp::croak "mandatory argument fh is missing";
148		234
149	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	235	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
150		236
151	$self->on_eof ((delete $self->{on_eof} ) or Carp::croak "mandatory argument on_eof is missing");	237	if ($self->{tls}) {
		238	require Net::SSLeay;
		239	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});
		240	}
152		241
153	$self->on_error (delete $self->{on_error}) if $self->{on_error};	242	$self->{_activity} = AnyEvent->now;
		243	$self->_timeout;
		244
154	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	245	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
155	$self->on_read (delete $self->{on_read} ) if $self->{on_read};
156
157	$self->start_read;
158		246
159	$self	247	$self
160	}	248	}
161		249
162	sub _shutdown {	250	sub _shutdown {
163	my ($self) = @_;	251	my ($self) = @_;
164		252
		253	delete $self->{_tw};
165	delete $self->{rw};	254	delete $self->{_rw};
166	delete $self->{ww};	255	delete $self->{_ww};
167	delete $self->{fh};	256	delete $self->{fh};
168	}
169		257
		258	$self->stoptls;
		259	}
		260
170	sub error {	261	sub _error {
171	my ($self) = @_;	262	my ($self, $errno, $fatal) = @_;
172		263
173	{
174	local $!;
175	$self->_shutdown;	264	$self->_shutdown
176	}	265	if $fatal;
		266
		267	$! = $errno;
177		268
178	if ($self->{on_error}) {	269	if ($self->{on_error}) {
179	$self->{on_error}($self);	270	$self->{on_error}($self, $fatal);
180	} else {	271	} else {
181	die "AnyEvent::Handle uncaught fatal error: $!";	272	Carp::croak "AnyEvent::Handle uncaught error: $!";
182	}	273	}
183	}	274	}
184		275
185	=item $fh = $handle->fh	276	=item $fh = $handle->fh
186		277
187	This method returns the filehandle of the L<AnyEvent::Handle> object.	278	This method returns the file handle of the L<AnyEvent::Handle> object.
188		279
189	=cut	280	=cut
190		281
191	sub fh { $_[0]->{fh} }	282	sub fh { $_[0]{fh} }
192		283
193	=item $handle->on_error ($cb)	284	=item $handle->on_error ($cb)
194		285
195	Replace the current C<on_error> callback (see the C<on_error> constructor argument).	286	Replace the current C<on_error> callback (see the C<on_error> constructor argument).
196		287
…		…
208		299
209	sub on_eof {	300	sub on_eof {
210	$_[0]{on_eof} = $_[1];	301	$_[0]{on_eof} = $_[1];
211	}	302	}
212		303
		304	=item $handle->on_timeout ($cb)
		305
		306	Replace the current C<on_timeout> callback, or disables the callback
		307	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
		308	argument.
		309
		310	=cut
		311
		312	sub on_timeout {
		313	$_[0]{on_timeout} = $_[1];
		314	}
		315
		316	#############################################################################
		317
		318	=item $handle->timeout ($seconds)
		319
		320	Configures (or disables) the inactivity timeout.
		321
		322	=cut
		323
		324	sub timeout {
		325	my ($self, $timeout) = @_;
		326
		327	$self->{timeout} = $timeout;
		328	$self->_timeout;
		329	}
		330
		331	# reset the timeout watcher, as neccessary
		332	# also check for time-outs
		333	sub _timeout {
		334	my ($self) = @_;
		335
		336	if ($self->{timeout}) {
		337	my $NOW = AnyEvent->now;
		338
		339	# when would the timeout trigger?
		340	my $after = $self->{_activity} + $self->{timeout} - $NOW;
		341
		342	# now or in the past already?
		343	if ($after <= 0) {
		344	$self->{_activity} = $NOW;
		345
		346	if ($self->{on_timeout}) {
		347	$self->{on_timeout}($self);
		348	} else {
		349	$self->_error (&Errno::ETIMEDOUT);
		350	}
		351
		352	# callback could have changed timeout value, optimise
		353	return unless $self->{timeout};
		354
		355	# calculate new after
		356	$after = $self->{timeout};
		357	}
		358
		359	Scalar::Util::weaken $self;
		360	return unless $self; # ->error could have destroyed $self
		361
		362	$self->{_tw} \|\|= AnyEvent->timer (after => $after, cb => sub {
		363	delete $self->{_tw};
		364	$self->_timeout;
		365	});
		366	} else {
		367	delete $self->{_tw};
		368	}
		369	}
		370
213	#############################################################################	371	#############################################################################
214		372
215	=back	373	=back
216		374
217	=head2 WRITE QUEUE	375	=head2 WRITE QUEUE
…		…
220	for reading.	378	for reading.
221		379
222	The write queue is very simple: you can add data to its end, and	380	The write queue is very simple: you can add data to its end, and
223	AnyEvent::Handle will automatically try to get rid of it for you.	381	AnyEvent::Handle will automatically try to get rid of it for you.
224		382
225	When data could be writtena nd the write buffer is shorter then the low	383	When data could be written and the write buffer is shorter then the low
226	water mark, the C<on_drain> callback will be invoked.	384	water mark, the C<on_drain> callback will be invoked.
227		385
228	=over 4	386	=over 4
229		387
230	=item $handle->on_drain ($cb)	388	=item $handle->on_drain ($cb)
…		…
249	want (only limited by the available memory), as C<AnyEvent::Handle>	407	want (only limited by the available memory), as C<AnyEvent::Handle>
250	buffers it independently of the kernel.	408	buffers it independently of the kernel.
251		409
252	=cut	410	=cut
253		411
254	sub push_write {	412	sub _drain_wbuf {
255	my ($self, $data) = @_;	413	my ($self) = @_;
256		414
257	$self->{wbuf} .= $data;	415	if (!$self->{_ww} && length $self->{wbuf}) {
258		416
259	unless ($self->{ww}) {
260	Scalar::Util::weaken $self;	417	Scalar::Util::weaken $self;
		418
261	my $cb = sub {	419	my $cb = sub {
262	my $len = syswrite $self->{fh}, $self->{wbuf};	420	my $len = syswrite $self->{fh}, $self->{wbuf};
263		421
264	if ($len > 0) {	422	if ($len >= 0) {
265	substr $self->{wbuf}, 0, $len, "";	423	substr $self->{wbuf}, 0, $len, "";
266		424
		425	$self->{_activity} = AnyEvent->now;
267		426
268	$self->{on_drain}($self)	427	$self->{on_drain}($self)
269	if $self->{low_water_mark} >= length $self->{wbuf}	428	if $self->{low_water_mark} >= length $self->{wbuf}
270	&& $self->{on_drain};	429	&& $self->{on_drain};
271		430
272	delete $self->{ww} unless length $self->{wbuf};	431	delete $self->{_ww} unless length $self->{wbuf};
273	} elsif ($! != EAGAIN && $! != EINTR) {	432	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
274	$self->error;	433	$self->_error ($!, 1);
275	}	434	}
276	};	435	};
277		436
		437	# try to write data immediately
		438	$cb->();
		439
		440	# if still data left in wbuf, we need to poll
278	$self->{ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb);	441	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)
279		442	if length $self->{wbuf};
280	$cb->($self);
281	};	443	};
282	}	444	}
		445
		446	our %WH;
		447
		448	sub register_write_type($$) {
		449	$WH{$_[0]} = $_[1];
		450	}
		451
		452	sub push_write {
		453	my $self = shift;
		454
		455	if (@_ > 1) {
		456	my $type = shift;
		457
		458	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
		459	->($self, @_);
		460	}
		461
		462	if ($self->{filter_w}) {
		463	$self->{filter_w}($self, \$_[0]);
		464	} else {
		465	$self->{wbuf} .= $_[0];
		466	$self->_drain_wbuf;
		467	}
		468	}
		469
		470	=item $handle->push_write (type => @args)
		471
		472	Instead of formatting your data yourself, you can also let this module do
		473	the job by specifying a type and type-specific arguments.
		474
		475	Predefined types are (if you have ideas for additional types, feel free to
		476	drop by and tell us):
		477
		478	=over 4
		479
		480	=item netstring => $string
		481
		482	Formats the given value as netstring
		483	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).
		484
		485	=cut
		486
		487	register_write_type netstring => sub {
		488	my ($self, $string) = @_;
		489
		490	sprintf "%d:%s,", (length $string), $string
		491	};
		492
		493	=item packstring => $format, $data
		494
		495	An octet string prefixed with an encoded length. The encoding C<$format>
		496	uses the same format as a Perl C<pack> format, but must specify a single
		497	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		498	optional C<!>, C<< < >> or C<< > >> modifier).
		499
		500	=cut
		501
		502	register_write_type packstring => sub {
		503	my ($self, $format, $string) = @_;
		504
		505	pack "$format/a", $string
		506	};
		507
		508	=item json => $array_or_hashref
		509
		510	Encodes the given hash or array reference into a JSON object. Unless you
		511	provide your own JSON object, this means it will be encoded to JSON text
		512	in UTF-8.
		513
		514	JSON objects (and arrays) are self-delimiting, so you can write JSON at
		515	one end of a handle and read them at the other end without using any
		516	additional framing.
		517
		518	The generated JSON text is guaranteed not to contain any newlines: While
		519	this module doesn't need delimiters after or between JSON texts to be
		520	able to read them, many other languages depend on that.
		521
		522	A simple RPC protocol that interoperates easily with others is to send
		523	JSON arrays (or objects, although arrays are usually the better choice as
		524	they mimic how function argument passing works) and a newline after each
		525	JSON text:
		526
		527	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
		528	$handle->push_write ("\012");
		529
		530	An AnyEvent::Handle receiver would simply use the C<json> read type and
		531	rely on the fact that the newline will be skipped as leading whitespace:
		532
		533	$handle->push_read (json => sub { my $array = $_[1]; ... });
		534
		535	Other languages could read single lines terminated by a newline and pass
		536	this line into their JSON decoder of choice.
		537
		538	=cut
		539
		540	register_write_type json => sub {
		541	my ($self, $ref) = @_;
		542
		543	require JSON;
		544
		545	$self->{json} ? $self->{json}->encode ($ref)
		546	: JSON::encode_json ($ref)
		547	};
		548
		549	=item storable => $reference
		550
		551	Freezes the given reference using L<Storable> and writes it to the
		552	handle. Uses the C<nfreeze> format.
		553
		554	=cut
		555
		556	register_write_type storable => sub {
		557	my ($self, $ref) = @_;
		558
		559	require Storable;
		560
		561	pack "w/a", Storable::nfreeze ($ref)
		562	};
		563
		564	=back
		565
		566	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
		567
		568	This function (not method) lets you add your own types to C<push_write>.
		569	Whenever the given C<type> is used, C<push_write> will invoke the code
		570	reference with the handle object and the remaining arguments.
		571
		572	The code reference is supposed to return a single octet string that will
		573	be appended to the write buffer.
		574
		575	Note that this is a function, and all types registered this way will be
		576	global, so try to use unique names.
		577
		578	=cut
283		579
284	#############################################################################	580	#############################################################################
285		581
286	=back	582	=back
287		583
…		…
299	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	595	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want
300	or not.	596	or not.
301		597
302	In the more complex case, you want to queue multiple callbacks. In this	598	In the more complex case, you want to queue multiple callbacks. In this
303	case, AnyEvent::Handle will call the first queued callback each time new	599	case, AnyEvent::Handle will call the first queued callback each time new
304	data arrives and removes it when it has done its job (see C<push_read>,	600	data arrives (also the first time it is queued) and removes it when it has
305	below).	601	done its job (see C<push_read>, below).
306		602
307	This way you can, for example, push three line-reads, followed by reading	603	This way you can, for example, push three line-reads, followed by reading
308	a chunk of data, and AnyEvent::Handle will execute them in order.	604	a chunk of data, and AnyEvent::Handle will execute them in order.
309		605
310	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	606	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
311	the specified number of bytes which give an XML datagram.	607	the specified number of bytes which give an XML datagram.
312		608
313	# in the default state, expect some header bytes	609	# in the default state, expect some header bytes
314	$handle->on_read (sub {	610	$handle->on_read (sub {
315	# some data is here, now queue the length-header-read (4 octets)	611	# some data is here, now queue the length-header-read (4 octets)
316	shift->unshift_read_chunk (4, sub {	612	shift->unshift_read (chunk => 4, sub {
317	# header arrived, decode	613	# header arrived, decode
318	my $len = unpack "N", $_[1];	614	my $len = unpack "N", $_[1];
319		615
320	# now read the payload	616	# now read the payload
321	shift->unshift_read_chunk ($len, sub {	617	shift->unshift_read (chunk => $len, sub {
322	my $xml = $_[1];	618	my $xml = $_[1];
323	# handle xml	619	# handle xml
324	});	620	});
325	});	621	});
326	});	622	});
…		…
333		629
334	# request one	630	# request one
335	$handle->push_write ("request 1\015\012");	631	$handle->push_write ("request 1\015\012");
336		632
337	# we expect "ERROR" or "OK" as response, so push a line read	633	# we expect "ERROR" or "OK" as response, so push a line read
338	$handle->push_read_line (sub {	634	$handle->push_read (line => sub {
339	# if we got an "OK", we have to _prepend_ another line,	635	# if we got an "OK", we have to _prepend_ another line,
340	# so it will be read before the second request reads its 64 bytes	636	# so it will be read before the second request reads its 64 bytes
341	# which are already in the queue when this callback is called	637	# which are already in the queue when this callback is called
342	# we don't do this in case we got an error	638	# we don't do this in case we got an error
343	if ($_[1] eq "OK") {	639	if ($_[1] eq "OK") {
344	$_[0]->unshift_read_line (sub {	640	$_[0]->unshift_read (line => sub {
345	my $response = $_[1];	641	my $response = $_[1];
346	...	642	...
347	});	643	});
348	}	644	}
349	});	645	});
350		646
351	# request two	647	# request two
352	$handle->push_write ("request 2\015\012");	648	$handle->push_write ("request 2\015\012");
353		649
354	# simply read 64 bytes, always	650	# simply read 64 bytes, always
355	$handle->push_read_chunk (64, sub {	651	$handle->push_read (chunk => 64, sub {
356	my $response = $_[1];	652	my $response = $_[1];
357	...	653	...
358	});	654	});
359		655
360	=over 4	656	=over 4
…		…
362	=cut	658	=cut
363		659
364	sub _drain_rbuf {	660	sub _drain_rbuf {
365	my ($self) = @_;	661	my ($self) = @_;
366		662
367	return if $self->{in_drain};
368	local $self->{in_drain} = 1;	663	local $self->{_in_drain} = 1;
369		664
370	while (my $len = length $self->{rbuf}) {	665	if (
		666	defined $self->{rbuf_max}
		667	&& $self->{rbuf_max} < length $self->{rbuf}
		668	) {
		669	return $self->_error (&Errno::ENOSPC, 1);
		670	}
		671
		672	while () {
371	no strict 'refs';	673	no strict 'refs';
		674
		675	my $len = length $self->{rbuf};
		676
372	if (my $cb = shift @{ $self->{queue} }) {	677	if (my $cb = shift @{ $self->{_queue} }) {
373	if (!$cb->($self)) {	678	unless ($cb->($self)) {
374	if ($self->{eof}) {	679	if ($self->{_eof}) {
375	# no progress can be made (not enough data and no data forthcoming)	680	# no progress can be made (not enough data and no data forthcoming)
376	$! = &Errno::EPIPE; return $self->error;	681	$self->_error (&Errno::EPIPE, 1), last;
377	}	682	}
378		683
379	unshift @{ $self->{queue} }, $cb;	684	unshift @{ $self->{_queue} }, $cb;
380	return;	685	last;
381	}	686	}
382	} elsif ($self->{on_read}) {	687	} elsif ($self->{on_read}) {
		688	last unless $len;
		689
383	$self->{on_read}($self);	690	$self->{on_read}($self);
384		691
385	if (	692	if (
386	$self->{eof} # if no further data will arrive
387	&& $len == length $self->{rbuf} # and no data has been consumed	693	$len == length $self->{rbuf} # if no data has been consumed
388	&& !@{ $self->{queue} } # and the queue is still empty	694	&& !@{ $self->{_queue} } # and the queue is still empty
389	&& $self->{on_read} # and we still want to read data	695	&& $self->{on_read} # but we still have on_read
390	) {	696	) {
		697	# no further data will arrive
391	# then no progress can be made	698	# so no progress can be made
392	$! = &Errno::EPIPE; return $self->error;	699	$self->_error (&Errno::EPIPE, 1), last
		700	if $self->{_eof};
		701
		702	last; # more data might arrive
393	}	703	}
394	} else {	704	} else {
395	# read side becomes idle	705	# read side becomes idle
396	delete $self->{rw};	706	delete $self->{_rw};
397	return;	707	last;
398	}	708	}
399	}	709	}
400		710
401	if ($self->{eof}) {
402	$self->_shutdown;
403	$self->{on_eof}($self);	711	$self->{on_eof}($self)
		712	if $self->{_eof} && $self->{on_eof};
		713
		714	# may need to restart read watcher
		715	unless ($self->{_rw}) {
		716	$self->start_read
		717	if $self->{on_read} \|\| @{ $self->{_queue} };
404	}	718	}
405	}	719	}
406		720
407	=item $handle->on_read ($cb)	721	=item $handle->on_read ($cb)
408		722
…		…
414		728
415	sub on_read {	729	sub on_read {
416	my ($self, $cb) = @_;	730	my ($self, $cb) = @_;
417		731
418	$self->{on_read} = $cb;	732	$self->{on_read} = $cb;
		733	$self->_drain_rbuf if $cb && !$self->{_in_drain};
419	}	734	}
420		735
421	=item $handle->rbuf	736	=item $handle->rbuf
422		737
423	Returns the read buffer (as a modifiable lvalue).	738	Returns the read buffer (as a modifiable lvalue).
…		…
442	Append the given callback to the end of the queue (C<push_read>) or	757	Append the given callback to the end of the queue (C<push_read>) or
443	prepend it (C<unshift_read>).	758	prepend it (C<unshift_read>).
444		759
445	The callback is called each time some additional read data arrives.	760	The callback is called each time some additional read data arrives.
446		761
447	It must check wether enough data is in the read buffer already.	762	It must check whether enough data is in the read buffer already.
448		763
449	If not enough data is available, it must return the empty list or a false	764	If not enough data is available, it must return the empty list or a false
450	value, in which case it will be called repeatedly until enough data is	765	value, in which case it will be called repeatedly until enough data is
451	available (or an error condition is detected).	766	available (or an error condition is detected).
452		767
…		…
454	interested in (which can be none at all) and return a true value. After returning	769	interested in (which can be none at all) and return a true value. After returning
455	true, it will be removed from the queue.	770	true, it will be removed from the queue.
456		771
457	=cut	772	=cut
458		773
		774	our %RH;
		775
		776	sub register_read_type($$) {
		777	$RH{$_[0]} = $_[1];
		778	}
		779
459	sub push_read {	780	sub push_read {
460	my ($self, $cb) = @_;	781	my $self = shift;
		782	my $cb = pop;
461		783
		784	if (@_) {
		785	my $type = shift;
		786
		787	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
		788	->($self, $cb, @_);
		789	}
		790
462	push @{ $self->{queue} }, $cb;	791	push @{ $self->{_queue} }, $cb;
463	$self->_drain_rbuf;	792	$self->_drain_rbuf unless $self->{_in_drain};
464	}	793	}
465		794
466	sub unshift_read {	795	sub unshift_read {
467	my ($self, $cb) = @_;	796	my $self = shift;
		797	my $cb = pop;
468		798
		799	if (@_) {
		800	my $type = shift;
		801
		802	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
		803	->($self, $cb, @_);
		804	}
		805
		806
469	push @{ $self->{queue} }, $cb;	807	unshift @{ $self->{_queue} }, $cb;
470	$self->_drain_rbuf;	808	$self->_drain_rbuf unless $self->{_in_drain};
471	}	809	}
472		810
473	=item $handle->push_read_chunk ($len, $cb->($self, $data))	811	=item $handle->push_read (type => @args, $cb)
474		812
475	=item $handle->unshift_read_chunk ($len, $cb->($self, $data))	813	=item $handle->unshift_read (type => @args, $cb)
476		814
477	Append the given callback to the end of the queue (C<push_read_chunk>) or	815	Instead of providing a callback that parses the data itself you can chose
478	prepend it (C<unshift_read_chunk>).	816	between a number of predefined parsing formats, for chunks of data, lines
		817	etc.
479		818
480	The callback will be called only once C<$len> bytes have been read, and	819	Predefined types are (if you have ideas for additional types, feel free to
481	these C<$len> bytes will be passed to the callback.	820	drop by and tell us):
482		821
483	=cut	822	=over 4
484		823
485	sub _read_chunk($$) {	824	=item chunk => $octets, $cb->($handle, $data)
		825
		826	Invoke the callback only once C<$octets> bytes have been read. Pass the
		827	data read to the callback. The callback will never be called with less
		828	data.
		829
		830	Example: read 2 bytes.
		831
		832	$handle->push_read (chunk => 2, sub {
		833	warn "yay ", unpack "H*", $_[1];
		834	});
		835
		836	=cut
		837
		838	register_read_type chunk => sub {
486	my ($self, $len, $cb) = @_;	839	my ($self, $cb, $len) = @_;
487		840
488	sub {	841	sub {
489	$len <= length $_[0]{rbuf} or return;	842	$len <= length $_[0]{rbuf} or return;
490	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	843	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
491	1	844	1
492	}	845	}
493	}	846	};
494		847
		848	# compatibility with older API
495	sub push_read_chunk {	849	sub push_read_chunk {
496	$_[0]->push_read (&_read_chunk);	850	$_[0]->push_read (chunk => $_[1], $_[2]);
497	}	851	}
498
499		852
500	sub unshift_read_chunk {	853	sub unshift_read_chunk {
501	$_[0]->unshift_read (&_read_chunk);	854	$_[0]->unshift_read (chunk => $_[1], $_[2]);
502	}	855	}
503		856
504	=item $handle->push_read_line ([$eol, ]$cb->($self, $line, $eol))	857	=item line => [$eol, ]$cb->($handle, $line, $eol)
505
506	=item $handle->unshift_read_line ([$eol, ]$cb->($self, $line, $eol))
507
508	Append the given callback to the end of the queue (C<push_read_line>) or
509	prepend it (C<unshift_read_line>).
510		858
511	The callback will be called only once a full line (including the end of	859	The callback will be called only once a full line (including the end of
512	line marker, C<$eol>) has been read. This line (excluding the end of line	860	line marker, C<$eol>) has been read. This line (excluding the end of line
513	marker) will be passed to the callback as second argument (C<$line>), and	861	marker) will be passed to the callback as second argument (C<$line>), and
514	the end of line marker as the third argument (C<$eol>).	862	the end of line marker as the third argument (C<$eol>).
…		…
525	Partial lines at the end of the stream will never be returned, as they are	873	Partial lines at the end of the stream will never be returned, as they are
526	not marked by the end of line marker.	874	not marked by the end of line marker.
527		875
528	=cut	876	=cut
529		877
530	sub _read_line($$) {	878	register_read_type line => sub {
531	my $self = shift;	879	my ($self, $cb, $eol) = @_;
532	my $cb = pop;
533	my $eol = @_ ? shift : qr\|(\015?\012)\|;
534	my $pos;
535		880
		881	$eol = qr\|(\015?\012)\| if @_ < 3;
536	$eol = qr\|(\Q$eol\E)\| unless ref $eol;	882	$eol = quotemeta $eol unless ref $eol;
537	$eol = qr\|^(.*?)($eol)\|;	883	$eol = qr\|^(.*?)($eol)\|s;
538		884
539	sub {	885	sub {
540	$_[0]{rbuf} =~ s/$eol// or return;	886	$_[0]{rbuf} =~ s/$eol// or return;
541		887
542	$cb->($_[0], $1, $2);	888	$cb->($_[0], $1, $2);
543	1	889	1
544	}	890	}
545	}	891	};
546		892
		893	# compatibility with older API
547	sub push_read_line {	894	sub push_read_line {
548	$_[0]->push_read (&_read_line);	895	my $self = shift;
		896	$self->push_read (line => @_);
549	}	897	}
550		898
551	sub unshift_read_line {	899	sub unshift_read_line {
552	$_[0]->unshift_read (&_read_line);	900	my $self = shift;
		901	$self->unshift_read (line => @_);
553	}	902	}
		903
		904	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
		905
		906	Makes a regex match against the regex object C<$accept> and returns
		907	everything up to and including the match.
		908
		909	Example: read a single line terminated by '\n'.
		910
		911	$handle->push_read (regex => qr<\n>, sub { ... });
		912
		913	If C<$reject> is given and not undef, then it determines when the data is
		914	to be rejected: it is matched against the data when the C<$accept> regex
		915	does not match and generates an C<EBADMSG> error when it matches. This is
		916	useful to quickly reject wrong data (to avoid waiting for a timeout or a
		917	receive buffer overflow).
		918
		919	Example: expect a single decimal number followed by whitespace, reject
		920	anything else (not the use of an anchor).
		921
		922	$handle->push_read (regex => qr<^[0-9]+\s>, qr<[^0-9]>, sub { ... });
		923
		924	If C<$skip> is given and not C<undef>, then it will be matched against
		925	the receive buffer when neither C<$accept> nor C<$reject> match,
		926	and everything preceding and including the match will be accepted
		927	unconditionally. This is useful to skip large amounts of data that you
		928	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
		929	have to start matching from the beginning. This is purely an optimisation
		930	and is usually worth only when you expect more than a few kilobytes.
		931
		932	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
		933	expect the header to be very large (it isn't in practise, but...), we use
		934	a skip regex to skip initial portions. The skip regex is tricky in that
		935	it only accepts something not ending in either \015 or \012, as these are
		936	required for the accept regex.
		937
		938	$handle->push_read (regex =>
		939	qr<\015\012\015\012>,
		940	undef, # no reject
		941	qr<^.*[^\015\012]>,
		942	sub { ... });
		943
		944	=cut
		945
		946	register_read_type regex => sub {
		947	my ($self, $cb, $accept, $reject, $skip) = @_;
		948
		949	my $data;
		950	my $rbuf = \$self->{rbuf};
		951
		952	sub {
		953	# accept
		954	if ($$rbuf =~ $accept) {
		955	$data .= substr $$rbuf, 0, $+[0], "";
		956	$cb->($self, $data);
		957	return 1;
		958	}
		959
		960	# reject
		961	if ($reject && $$rbuf =~ $reject) {
		962	$self->_error (&Errno::EBADMSG);
		963	}
		964
		965	# skip
		966	if ($skip && $$rbuf =~ $skip) {
		967	$data .= substr $$rbuf, 0, $+[0], "";
		968	}
		969
		970	()
		971	}
		972	};
		973
		974	=item netstring => $cb->($handle, $string)
		975
		976	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
		977
		978	Throws an error with C<$!> set to EBADMSG on format violations.
		979
		980	=cut
		981
		982	register_read_type netstring => sub {
		983	my ($self, $cb) = @_;
		984
		985	sub {
		986	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
		987	if ($_[0]{rbuf} =~ /[^0-9]/) {
		988	$self->_error (&Errno::EBADMSG);
		989	}
		990	return;
		991	}
		992
		993	my $len = $1;
		994
		995	$self->unshift_read (chunk => $len, sub {
		996	my $string = $_[1];
		997	$_[0]->unshift_read (chunk => 1, sub {
		998	if ($_[1] eq ",") {
		999	$cb->($_[0], $string);
		1000	} else {
		1001	$self->_error (&Errno::EBADMSG);
		1002	}
		1003	});
		1004	});
		1005
		1006	1
		1007	}
		1008	};
		1009
		1010	=item packstring => $format, $cb->($handle, $string)
		1011
		1012	An octet string prefixed with an encoded length. The encoding C<$format>
		1013	uses the same format as a Perl C<pack> format, but must specify a single
		1014	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1015	optional C<!>, C<< < >> or C<< > >> modifier).
		1016
		1017	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.
		1018
		1019	Example: read a block of data prefixed by its length in BER-encoded
		1020	format (very efficient).
		1021
		1022	$handle->push_read (packstring => "w", sub {
		1023	my ($handle, $data) = @_;
		1024	});
		1025
		1026	=cut
		1027
		1028	register_read_type packstring => sub {
		1029	my ($self, $cb, $format) = @_;
		1030
		1031	sub {
		1032	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1033	defined (my $len = eval { unpack $format, $_[0]->{rbuf} })
		1034	or return;
		1035
		1036	# remove prefix
		1037	substr $_[0]->{rbuf}, 0, (length pack $format, $len), "";
		1038
		1039	# read rest
		1040	$_[0]->unshift_read (chunk => $len, $cb);
		1041
		1042	1
		1043	}
		1044	};
		1045
		1046	=item json => $cb->($handle, $hash_or_arrayref)
		1047
		1048	Reads a JSON object or array, decodes it and passes it to the callback.
		1049
		1050	If a C<json> object was passed to the constructor, then that will be used
		1051	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
		1052
		1053	This read type uses the incremental parser available with JSON version
		1054	2.09 (and JSON::XS version 2.2) and above. You have to provide a
		1055	dependency on your own: this module will load the JSON module, but
		1056	AnyEvent does not depend on it itself.
		1057
		1058	Since JSON texts are fully self-delimiting, the C<json> read and write
		1059	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
		1060	the C<json> write type description, above, for an actual example.
		1061
		1062	=cut
		1063
		1064	register_read_type json => sub {
		1065	my ($self, $cb) = @_;
		1066
		1067	require JSON;
		1068
		1069	my $data;
		1070	my $rbuf = \$self->{rbuf};
		1071
		1072	my $json = $self->{json} \|\|= JSON->new->utf8;
		1073
		1074	sub {
		1075	my $ref = $json->incr_parse ($self->{rbuf});
		1076
		1077	if ($ref) {
		1078	$self->{rbuf} = $json->incr_text;
		1079	$json->incr_text = "";
		1080	$cb->($self, $ref);
		1081
		1082	1
		1083	} else {
		1084	$self->{rbuf} = "";
		1085	()
		1086	}
		1087	}
		1088	};
		1089
		1090	=item storable => $cb->($handle, $ref)
		1091
		1092	Deserialises a L<Storable> frozen representation as written by the
		1093	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1094	data).
		1095
		1096	Raises C<EBADMSG> error if the data could not be decoded.
		1097
		1098	=cut
		1099
		1100	register_read_type storable => sub {
		1101	my ($self, $cb) = @_;
		1102
		1103	require Storable;
		1104
		1105	sub {
		1106	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1107	defined (my $len = eval { unpack "w", $_[0]->{rbuf} })
		1108	or return;
		1109
		1110	# remove prefix
		1111	substr $_[0]->{rbuf}, 0, (length pack "w", $len), "";
		1112
		1113	# read rest
		1114	$_[0]->unshift_read (chunk => $len, sub {
		1115	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1116	$cb->($_[0], $ref);
		1117	} else {
		1118	$self->_error (&Errno::EBADMSG);
		1119	}
		1120	});
		1121	}
		1122	};
		1123
		1124	=back
		1125
		1126	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)
		1127
		1128	This function (not method) lets you add your own types to C<push_read>.
		1129
		1130	Whenever the given C<type> is used, C<push_read> will invoke the code
		1131	reference with the handle object, the callback and the remaining
		1132	arguments.
		1133
		1134	The code reference is supposed to return a callback (usually a closure)
		1135	that works as a plain read callback (see C<< ->push_read ($cb) >>).
		1136
		1137	It should invoke the passed callback when it is done reading (remember to
		1138	pass C<$handle> as first argument as all other callbacks do that).
		1139
		1140	Note that this is a function, and all types registered this way will be
		1141	global, so try to use unique names.
		1142
		1143	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,
		1144	search for C<register_read_type>)).
554		1145
555	=item $handle->stop_read	1146	=item $handle->stop_read
556		1147
557	=item $handle->start_read	1148	=item $handle->start_read
558		1149
559	In rare cases you actually do not want to read anything form the	1150	In rare cases you actually do not want to read anything from the
560	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1151	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
561	any queued callbacks will be executed then. To start readign again, call	1152	any queued callbacks will be executed then. To start reading again, call
562	C<start_read>.	1153	C<start_read>.
		1154
		1155	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1156	you change the C<on_read> callback or push/unshift a read callback, and it
		1157	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1158	there are any read requests in the queue.
563		1159
564	=cut	1160	=cut
565		1161
566	sub stop_read {	1162	sub stop_read {
567	my ($self) = @_;	1163	my ($self) = @_;
568		1164
569	delete $self->{rw};	1165	delete $self->{_rw};
570	}	1166	}
571		1167
572	sub start_read {	1168	sub start_read {
573	my ($self) = @_;	1169	my ($self) = @_;
574		1170
575	unless ($self->{rw} \|\| $self->{eof}) {	1171	unless ($self->{_rw} \|\| $self->{_eof}) {
576	Scalar::Util::weaken $self;	1172	Scalar::Util::weaken $self;
577		1173
578	$self->{rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1174	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
		1175	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};
579	my $len = sysread $self->{fh}, $self->{rbuf}, $self->{read_size} \|\| 8192, length $self->{rbuf};	1176	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;
580		1177
581	if ($len > 0) {	1178	if ($len > 0) {
582	if (defined $self->{rbuf_max}) {	1179	$self->{_activity} = AnyEvent->now;
583	if ($self->{rbuf_max} < length $self->{rbuf}) {	1180
584	$! = &Errno::ENOSPC; return $self->error;	1181	$self->{filter_r}
585	}	1182	? $self->{filter_r}($self, $rbuf)
586	}	1183	: $self->{_in_drain} \|\| $self->_drain_rbuf;
587		1184
588	} elsif (defined $len) {	1185	} elsif (defined $len) {
589	$self->{eof} = 1;
590	delete $self->{rw};	1186	delete $self->{_rw};
		1187	$self->{_eof} = 1;
		1188	$self->_drain_rbuf unless $self->{_in_drain};
591		1189
592	} elsif ($! != EAGAIN && $! != EINTR) {	1190	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
593	return $self->error;	1191	return $self->_error ($!, 1);
594	}	1192	}
595
596	$self->_drain_rbuf;
597	});	1193	});
598	}	1194	}
599	}	1195	}
600		1196
		1197	sub _dotls {
		1198	my ($self) = @_;
		1199
		1200	my $buf;
		1201
		1202	if (length $self->{_tls_wbuf}) {
		1203	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
		1204	substr $self->{_tls_wbuf}, 0, $len, "";
		1205	}
		1206	}
		1207
		1208	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {
		1209	$self->{wbuf} .= $buf;
		1210	$self->_drain_wbuf;
		1211	}
		1212
		1213	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {
		1214	if (length $buf) {
		1215	$self->{rbuf} .= $buf;
		1216	$self->_drain_rbuf unless $self->{_in_drain};
		1217	} else {
		1218	# let's treat SSL-eof as we treat normal EOF
		1219	$self->{_eof} = 1;
		1220	$self->_shutdown;
		1221	return;
		1222	}
		1223	}
		1224
		1225	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
		1226
		1227	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
		1228	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
		1229	return $self->_error ($!, 1);
		1230	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
		1231	return $self->_error (&Errno::EIO, 1);
		1232	}
		1233
		1234	# all others are fine for our purposes
		1235	}
		1236	}
		1237
		1238	=item $handle->starttls ($tls[, $tls_ctx])
		1239
		1240	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
		1241	object is created, you can also do that at a later time by calling
		1242	C<starttls>.
		1243
		1244	The first argument is the same as the C<tls> constructor argument (either
		1245	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
		1246
		1247	The second argument is the optional C<Net::SSLeay::CTX> object that is
		1248	used when AnyEvent::Handle has to create its own TLS connection object.
		1249
		1250	The TLS connection object will end up in C<< $handle->{tls} >> after this
		1251	call and can be used or changed to your liking. Note that the handshake
		1252	might have already started when this function returns.
		1253
		1254	=cut
		1255
		1256	sub starttls {
		1257	my ($self, $ssl, $ctx) = @_;
		1258
		1259	$self->stoptls;
		1260
		1261	if ($ssl eq "accept") {
		1262	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());
		1263	Net::SSLeay::set_accept_state ($ssl);
		1264	} elsif ($ssl eq "connect") {
		1265	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());
		1266	Net::SSLeay::set_connect_state ($ssl);
		1267	}
		1268
		1269	$self->{tls} = $ssl;
		1270
		1271	# basically, this is deep magic (because SSL_read should have the same issues)
		1272	# but the openssl maintainers basically said: "trust us, it just works".
		1273	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
		1274	# and mismaintained ssleay-module doesn't even offer them).
		1275	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1276	Net::SSLeay::CTX_set_mode ($self->{tls},
		1277	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)
		1278	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));
		1279
		1280	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
		1281	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
		1282
		1283	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});
		1284
		1285	$self->{filter_w} = sub {
		1286	$_[0]{_tls_wbuf} .= ${$_[1]};
		1287	&_dotls;
		1288	};
		1289	$self->{filter_r} = sub {
		1290	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
		1291	&_dotls;
		1292	};
		1293	}
		1294
		1295	=item $handle->stoptls
		1296
		1297	Destroys the SSL connection, if any. Partial read or write data will be
		1298	lost.
		1299
		1300	=cut
		1301
		1302	sub stoptls {
		1303	my ($self) = @_;
		1304
		1305	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};
		1306
		1307	delete $self->{_rbio};
		1308	delete $self->{_wbio};
		1309	delete $self->{_tls_wbuf};
		1310	delete $self->{filter_r};
		1311	delete $self->{filter_w};
		1312	}
		1313
		1314	sub DESTROY {
		1315	my $self = shift;
		1316
		1317	$self->stoptls;
		1318
		1319	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1320
		1321	if ($linger && length $self->{wbuf}) {
		1322	my $fh = delete $self->{fh};
		1323	my $wbuf = delete $self->{wbuf};
		1324
		1325	my @linger;
		1326
		1327	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {
		1328	my $len = syswrite $fh, $wbuf, length $wbuf;
		1329
		1330	if ($len > 0) {
		1331	substr $wbuf, 0, $len, "";
		1332	} else {
		1333	@linger = (); # end
		1334	}
		1335	});
		1336	push @linger, AnyEvent->timer (after => $linger, cb => sub {
		1337	@linger = ();
		1338	});
		1339	}
		1340	}
		1341
		1342	=item AnyEvent::Handle::TLS_CTX
		1343
		1344	This function creates and returns the Net::SSLeay::CTX object used by
		1345	default for TLS mode.
		1346
		1347	The context is created like this:
		1348
		1349	Net::SSLeay::load_error_strings;
		1350	Net::SSLeay::SSLeay_add_ssl_algorithms;
		1351	Net::SSLeay::randomize;
		1352
		1353	my $CTX = Net::SSLeay::CTX_new;
		1354
		1355	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
		1356
		1357	=cut
		1358
		1359	our $TLS_CTX;
		1360
		1361	sub TLS_CTX() {
		1362	$TLS_CTX \|\| do {
		1363	require Net::SSLeay;
		1364
		1365	Net::SSLeay::load_error_strings ();
		1366	Net::SSLeay::SSLeay_add_ssl_algorithms ();
		1367	Net::SSLeay::randomize ();
		1368
		1369	$TLS_CTX = Net::SSLeay::CTX_new ();
		1370
		1371	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
		1372
		1373	$TLS_CTX
		1374	}
		1375	}
		1376
601	=back	1377	=back
602		1378
		1379	=head1 SUBCLASSING AnyEvent::Handle
		1380
		1381	In many cases, you might want to subclass AnyEvent::Handle.
		1382
		1383	To make this easier, a given version of AnyEvent::Handle uses these
		1384	conventions:
		1385
		1386	=over 4
		1387
		1388	=item * all constructor arguments become object members.
		1389
		1390	At least initially, when you pass a C<tls>-argument to the constructor it
		1391	will end up in C<< $handle->{tls} >>. Those members might be changes or
		1392	mutated later on (for example C<tls> will hold the TLS connection object).
		1393
		1394	=item * other object member names are prefixed with an C<_>.
		1395
		1396	All object members not explicitly documented (internal use) are prefixed
		1397	with an underscore character, so the remaining non-C<_>-namespace is free
		1398	for use for subclasses.
		1399
		1400	=item * all members not documented here and not prefixed with an underscore
		1401	are free to use in subclasses.
		1402
		1403	Of course, new versions of AnyEvent::Handle may introduce more "public"
		1404	member variables, but thats just life, at least it is documented.
		1405
		1406	=back
		1407
603	=head1 AUTHOR	1408	=head1 AUTHOR
604		1409
605	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	1410	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
606		1411
607	=cut	1412	=cut

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.12 by elmex, Thu May 15 09:03:43 2008 UTC vs. Revision 1.64 by root, Fri Jun 6 11:01:17 2008 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.12 by elmex, Thu May 15 09:03:43 2008 UTC vs.
Revision 1.64 by root, Fri Jun 6 11:01:17 2008 UTC