ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.64 by root, Fri Jun 6 11:01:17 2008 UTC vs.
Revision 1.249 by root, Sat Nov 26 03:34:50 2016 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.15;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	AE::log error => $msg;
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	say "got line <$line>";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	on stream-based filehandles (sockets, pipes, and other stream
52	on sockets see L<AnyEvent::Util>.	37	things). Specifically, it doesn't work as expected on files, packet-based
		38	sockets or similar things.
53		39
		40	The L<AnyEvent::Intro> tutorial contains some well-documented
		41	AnyEvent::Handle examples.
		42
54	In the following, when the documentation refers to of "bytes" then this	43	In the following, where the documentation refers to "bytes", it means
55	means characters. As sysread and syswrite are used for all I/O, their	44	characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	45	treatment of characters applies to this module as well.
		46
		47	At the very minimum, you should specify C<fh> or C<connect>, and the
		48	C<on_error> callback.
57		49
58	All callbacks will be invoked with the handle object as their first	50	All callbacks will be invoked with the handle object as their first
59	argument.	51	argument.
60		52
		53	=cut
		54
		55	package AnyEvent::Handle;
		56
		57	use Scalar::Util ();
		58	use List::Util ();
		59	use Carp ();
		60	use Errno qw(EAGAIN EWOULDBLOCK EINTR);
		61
		62	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		63	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		64
		65	our $VERSION = $AnyEvent::VERSION;
		66
		67	sub _load_func($) {
		68	my $func = $_[0];
		69
		70	unless (defined &$func) {
		71	my $pkg = $func;
		72	do {
		73	$pkg =~ s/::[^:]+$//
		74	or return;
		75	eval "require $pkg";
		76	} until defined &$func;
		77	}
		78
		79	\&$func
		80	}
		81
		82	sub MAX_READ_SIZE() { 131072 }
		83
61	=head1 METHODS	84	=head1 METHODS
62		85
63	=over 4	86	=over 4
64		87
65	=item B<new (%args)>	88	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
66		89
67	The constructor supports these arguments (all as key => value pairs).	90	The constructor supports these arguments (all as C<< key => value >> pairs).
68		91
69	=over 4	92	=over 4
70		93
71	=item fh => $filehandle [MANDATORY]	94	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		95
73	The filehandle this L<AnyEvent::Handle> object will operate on.	96	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	97	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	98	C<AnyEvent::fh_unblock>) by the constructor and needs to stay in
		99	that mode.
77		100
		101	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		102
		103	Try to connect to the specified host and service (port), using
		104	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		105	default C<peername>.
		106
		107	You have to specify either this parameter, or C<fh>, above.
		108
		109	It is possible to push requests on the read and write queues, and modify
		110	properties of the stream, even while AnyEvent::Handle is connecting.
		111
		112	When this parameter is specified, then the C<on_prepare>,
		113	C<on_connect_error> and C<on_connect> callbacks will be called under the
		114	appropriate circumstances:
		115
		116	=over 4
		117
78	=item on_eof => $cb->($handle)	118	=item on_prepare => $cb->($handle)
79		119
80	Set the callback to be called when an end-of-file condition is detcted,	120	This (rarely used) callback is called before a new connection is
81	i.e. in the case of a socket, when the other side has closed the	121	attempted, but after the file handle has been created (you can access that
82	connection cleanly.	122	file handle via C<< $handle->{fh} >>). It could be used to prepare the
		123	file handle with parameters required for the actual connect (as opposed to
		124	settings that can be changed when the connection is already established).
83		125
84	While not mandatory, it is highly recommended to set an eof callback,	126	The return value of this callback should be the connect timeout value in
85	otherwise you might end up with a closed socket while you are still	127	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
86	waiting for data.	128	default timeout is to be used).
87		129
		130	=item on_connect => $cb->($handle, $host, $port, $retry->())
		131
		132	This callback is called when a connection has been successfully established.
		133
		134	The peer's numeric host and port (the socket peername) are passed as
		135	parameters, together with a retry callback. At the time it is called the
		136	read and write queues, EOF status, TLS status and similar properties of
		137	the handle will have been reset.
		138
		139	If, for some reason, the handle is not acceptable, calling C<$retry> will
		140	continue with the next connection target (in case of multi-homed hosts or
		141	SRV records there can be multiple connection endpoints). The C<$retry>
		142	callback can be invoked after the connect callback returns, i.e. one can
		143	start a handshake and then decide to retry with the next host if the
		144	handshake fails.
		145
		146	In most cases, you should ignore the C<$retry> parameter.
		147
		148	=item on_connect_error => $cb->($handle, $message)
		149
		150	This callback is called when the connection could not be
		151	established. C<$!> will contain the relevant error code, and C<$message> a
		152	message describing it (usually the same as C<"$!">).
		153
		154	If this callback isn't specified, then C<on_error> will be called with a
		155	fatal error instead.
		156
		157	=back
		158
88	=item on_error => $cb->($handle, $fatal)	159	=item on_error => $cb->($handle, $fatal, $message)
89		160
90	This is the error callback, which is called when, well, some error	161	This is the error callback, which is called when, well, some error
91	occured, such as not being able to resolve the hostname, failure to	162	occured, such as not being able to resolve the hostname, failure to
92	connect or a read error.	163	connect, or a read error.
93		164
94	Some errors are fatal (which is indicated by C<$fatal> being true). On	165	Some errors are fatal (which is indicated by C<$fatal> being true). On
95	fatal errors the handle object will be shut down and will not be	166	fatal errors the handle object will be destroyed (by a call to C<< ->
		167	destroy >>) after invoking the error callback (which means you are free to
		168	examine the handle object). Examples of fatal errors are an EOF condition
		169	with active (but unsatisfiable) read watchers (C<EPIPE>) or I/O errors. In
		170	cases where the other side can close the connection at will, it is
		171	often easiest to not report C<EPIPE> errors in this callback.
		172
		173	AnyEvent::Handle tries to find an appropriate error code for you to check
		174	against, but in some cases (TLS errors), this does not work well.
		175
		176	If you report the error to the user, it is recommended to always output
		177	the C<$message> argument in human-readable error messages (you don't need
		178	to report C<"$!"> if you report C<$message>).
		179
		180	If you want to react programmatically to the error, then looking at C<$!>
		181	and comparing it against some of the documented C<Errno> values is usually
		182	better than looking at the C<$message>.
		183
96	usable. Non-fatal errors can be retried by simply returning, but it is	184	Non-fatal errors can be retried by returning, but it is recommended
97	recommended to simply ignore this parameter and instead abondon the handle	185	to simply ignore this parameter and instead abondon the handle object
98	object when this callback is invoked.	186	when this callback is invoked. Examples of non-fatal errors are timeouts
		187	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
99		188
100	On callback entrance, the value of C<$!> contains the operating system	189	On entry to the callback, the value of C<$!> contains the operating
101	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	190	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		191	C<EPROTO>).
102		192
103	While not mandatory, it is I<highly> recommended to set this callback, as	193	While not mandatory, it is I<highly> recommended to set this callback, as
104	you will not be notified of errors otherwise. The default simply calls	194	you will not be notified of errors otherwise. The default just calls
105	C<croak>.	195	C<croak>.
106		196
107	=item on_read => $cb->($handle)	197	=item on_read => $cb->($handle)
108		198
109	This sets the default read callback, which is called when data arrives	199	This sets the default read callback, which is called when data arrives
110	and no read request is in the queue (unlike read queue callbacks, this	200	and no read request is in the queue (unlike read queue callbacks, this
111	callback will only be called when at least one octet of data is in the	201	callback will only be called when at least one octet of data is in the
112	read buffer).	202	read buffer).
113		203
114	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	204	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
115	method or access the C<$handle->{rbuf}> member directly.	205	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		206	must not enlarge or modify the read buffer, you can only remove data at
		207	the beginning from it.
116		208
		209	You can also call C<< ->push_read (...) >> or any other function that
		210	modifies the read queue. Or do both. Or ...
		211
117	When an EOF condition is detected then AnyEvent::Handle will first try to	212	When an EOF condition is detected, AnyEvent::Handle will first try to
118	feed all the remaining data to the queued callbacks and C<on_read> before	213	feed all the remaining data to the queued callbacks and C<on_read> before
119	calling the C<on_eof> callback. If no progress can be made, then a fatal	214	calling the C<on_eof> callback. If no progress can be made, then a fatal
120	error will be raised (with C<$!> set to C<EPIPE>).	215	error will be raised (with C<$!> set to C<EPIPE>).
121		216
		217	Note that, unlike requests in the read queue, an C<on_read> callback
		218	doesn't mean you I<require> some data: if there is an EOF and there
		219	are outstanding read requests then an error will be flagged. With an
		220	C<on_read> callback, the C<on_eof> callback will be invoked.
		221
		222	=item on_eof => $cb->($handle)
		223
		224	Set the callback to be called when an end-of-file condition is detected,
		225	i.e. in the case of a socket, when the other side has closed the
		226	connection cleanly, and there are no outstanding read requests in the
		227	queue (if there are read requests, then an EOF counts as an unexpected
		228	connection close and will be flagged as an error).
		229
		230	For sockets, this just means that the other side has stopped sending data,
		231	you can still try to write data, and, in fact, one can return from the EOF
		232	callback and continue writing data, as only the read part has been shut
		233	down.
		234
		235	If an EOF condition has been detected but no C<on_eof> callback has been
		236	set, then a fatal error will be raised with C<$!> set to <0>.
		237
122	=item on_drain => $cb->($handle)	238	=item on_drain => $cb->($handle)
123		239
124	This sets the callback that is called when the write buffer becomes empty	240	This sets the callback that is called once when the write buffer becomes
125	(or when the callback is set and the buffer is empty already).	241	empty (and immediately when the handle object is created).
126		242
127	To append to the write buffer, use the C<< ->push_write >> method.	243	To append to the write buffer, use the C<< ->push_write >> method.
128		244
		245	This callback is useful when you don't want to put all of your write data
		246	into the queue at once, for example, when you want to write the contents
		247	of some file to the socket you might not want to read the whole file into
		248	memory and push it into the queue, but instead only read more data from
		249	the file when the write queue becomes empty.
		250
129	=item timeout => $fractional_seconds	251	=item timeout => $fractional_seconds
130		252
		253	=item rtimeout => $fractional_seconds
		254
		255	=item wtimeout => $fractional_seconds
		256
131	If non-zero, then this enables an "inactivity" timeout: whenever this many	257	If non-zero, then these enables an "inactivity" timeout: whenever this
132	seconds pass without a successful read or write on the underlying file	258	many seconds pass without a successful read or write on the underlying
133	handle, the C<on_timeout> callback will be invoked (and if that one is	259	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
134	missing, an C<ETIMEDOUT> error will be raised).	260	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		261	error will be raised).
135		262
		263	There are three variants of the timeouts that work independently of each
		264	other, for both read and write (triggered when nothing was read I<OR>
		265	written), just read (triggered when nothing was read), and just write:
		266	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		267	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		268	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		269
136	Note that timeout processing is also active when you currently do not have	270	Note that timeout processing is active even when you do not have any
137	any outstanding read or write requests: If you plan to keep the connection	271	outstanding read or write requests: If you plan to keep the connection
138	idle then you should disable the timout temporarily or ignore the timeout	272	idle then you should disable the timeout temporarily or ignore the
139	in the C<on_timeout> callback.	273	timeout in the corresponding C<on_timeout> callback, in which case
		274	AnyEvent::Handle will simply restart the timeout.
140		275
141	Zero (the default) disables this timeout.	276	Zero (the default) disables the corresponding timeout.
142		277
143	=item on_timeout => $cb->($handle)	278	=item on_timeout => $cb->($handle)
		279
		280	=item on_rtimeout => $cb->($handle)
		281
		282	=item on_wtimeout => $cb->($handle)
144		283
145	Called whenever the inactivity timeout passes. If you return from this	284	Called whenever the inactivity timeout passes. If you return from this
146	callback, then the timeout will be reset as if some activity had happened,	285	callback, then the timeout will be reset as if some activity had happened,
147	so this condition is not fatal in any way.	286	so this condition is not fatal in any way.
148		287
149	=item rbuf_max => <bytes>	288	=item rbuf_max => <bytes>
150		289
151	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	290	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
152	when the read buffer ever (strictly) exceeds this size. This is useful to	291	when the read buffer ever (strictly) exceeds this size. This is useful to
153	avoid denial-of-service attacks.	292	avoid some forms of denial-of-service attacks.
154		293
155	For example, a server accepting connections from untrusted sources should	294	For example, a server accepting connections from untrusted sources should
156	be configured to accept only so-and-so much data that it cannot act on	295	be configured to accept only so-and-so much data that it cannot act on
157	(for example, when expecting a line, an attacker could send an unlimited	296	(for example, when expecting a line, an attacker could send an unlimited
158	amount of data without a callback ever being called as long as the line	297	amount of data without a callback ever being called as long as the line
159	isn't finished).	298	isn't finished).
160		299
		300	=item wbuf_max => <bytes>
		301
		302	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
		303	when the write buffer ever (strictly) exceeds this size. This is useful to
		304	avoid some forms of denial-of-service attacks.
		305
		306	Although the units of this parameter is bytes, this is the I<raw> number
		307	of bytes not yet accepted by the kernel. This can make a difference when
		308	you e.g. use TLS, as TLS typically makes your write data larger (but it
		309	can also make it smaller due to compression).
		310
		311	As an example of when this limit is useful, take a chat server that sends
		312	chat messages to a client. If the client does not read those in a timely
		313	manner then the send buffer in the server would grow unbounded.
		314
		315	=item autocork => <boolean>
		316
		317	When disabled (the default), C<push_write> will try to immediately
		318	write the data to the handle if possible. This avoids having to register
		319	a write watcher and wait for the next event loop iteration, but can
		320	be inefficient if you write multiple small chunks (on the wire, this
		321	disadvantage is usually avoided by your kernel's nagle algorithm, see
		322	C<no_delay>, but this option can save costly syscalls).
		323
		324	When enabled, writes will always be queued till the next event loop
		325	iteration. This is efficient when you do many small writes per iteration,
		326	but less efficient when you do a single write only per iteration (or when
		327	the write buffer often is full). It also increases write latency.
		328
		329	=item no_delay => <boolean>
		330
		331	When doing small writes on sockets, your operating system kernel might
		332	wait a bit for more data before actually sending it out. This is called
		333	the Nagle algorithm, and usually it is beneficial.
		334
		335	In some situations you want as low a delay as possible, which can be
		336	accomplishd by setting this option to a true value.
		337
		338	The default is your operating system's default behaviour (most likely
		339	enabled). This option explicitly enables or disables it, if possible.
		340
		341	=item keepalive => <boolean>
		342
		343	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		344	normally, TCP connections have no time-out once established, so TCP
		345	connections, once established, can stay alive forever even when the other
		346	side has long gone. TCP keepalives are a cheap way to take down long-lived
		347	TCP connections when the other side becomes unreachable. While the default
		348	is OS-dependent, TCP keepalives usually kick in after around two hours,
		349	and, if the other side doesn't reply, take down the TCP connection some 10
		350	to 15 minutes later.
		351
		352	It is harmless to specify this option for file handles that do not support
		353	keepalives, and enabling it on connections that are potentially long-lived
		354	is usually a good idea.
		355
		356	=item oobinline => <boolean>
		357
		358	BSD majorly fucked up the implementation of TCP urgent data. The result
		359	is that almost no OS implements TCP according to the specs, and every OS
		360	implements it slightly differently.
		361
		362	If you want to handle TCP urgent data, then setting this flag (the default
		363	is enabled) gives you the most portable way of getting urgent data, by
		364	putting it into the stream.
		365
		366	Since BSD emulation of OOB data on top of TCP's urgent data can have
		367	security implications, AnyEvent::Handle sets this flag automatically
		368	unless explicitly specified. Note that setting this flag after
		369	establishing a connection I<may> be a bit too late (data loss could
		370	already have occured on BSD systems), but at least it will protect you
		371	from most attacks.
		372
161	=item read_size => <bytes>	373	=item read_size => <bytes>
162		374
163	The default read block size (the amount of bytes this module will try to read	375	The initial read block size, the number of bytes this module will try
164	during each (loop iteration). Default: C<8192>.	376	to read during each loop iteration. Each handle object will consume
		377	at least this amount of memory for the read buffer as well, so when
		378	handling many connections watch out for memory requirements). See also
		379	C<max_read_size>. Default: C<2048>.
		380
		381	=item max_read_size => <bytes>
		382
		383	The maximum read buffer size used by the dynamic adjustment
		384	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		385	one go it will double C<read_size> up to the maximum given by this
		386	option. Default: C<131072> or C<read_size>, whichever is higher.
165		387
166	=item low_water_mark => <bytes>	388	=item low_water_mark => <bytes>
167		389
168	Sets the amount of bytes (default: C<0>) that make up an "empty" write	390	Sets the number of bytes (default: C<0>) that make up an "empty" write
169	buffer: If the write reaches this size or gets even samller it is	391	buffer: If the buffer reaches this size or gets even samller it is
170	considered empty.	392	considered empty.
171		393
		394	Sometimes it can be beneficial (for performance reasons) to add data to
		395	the write buffer before it is fully drained, but this is a rare case, as
		396	the operating system kernel usually buffers data as well, so the default
		397	is good in almost all cases.
		398
172	=item linger => <seconds>	399	=item linger => <seconds>
173		400
174	If non-zero (default: C<3600>), then the destructor of the	401	If this is non-zero (default: C<3600>), the destructor of the
175	AnyEvent::Handle object will check wether there is still outstanding write	402	AnyEvent::Handle object will check whether there is still outstanding
176	data and will install a watcher that will write out this data. No errors	403	write data and will install a watcher that will write this data to the
177	will be reported (this mostly matches how the operating system treats	404	socket. No errors will be reported (this mostly matches how the operating
178	outstanding data at socket close time).	405	system treats outstanding data at socket close time).
179		406
180	This will not work for partial TLS data that could not yet been	407	This will not work for partial TLS data that could not be encoded
181	encoded. This data will be lost.	408	yet. This data will be lost. Calling the C<stoptls> method in time might
		409	help.
		410
		411	=item peername => $string
		412
		413	A string used to identify the remote site - usually the DNS hostname
		414	(I<not> IDN!) used to create the connection, rarely the IP address.
		415
		416	Apart from being useful in error messages, this string is also used in TLS
		417	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		418	verification will be skipped when C<peername> is not specified or is
		419	C<undef>.
182		420
183	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	421	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
184		422
185	When this parameter is given, it enables TLS (SSL) mode, that means it	423	When this parameter is given, it enables TLS (SSL) mode, that means
186	will start making tls handshake and will transparently encrypt/decrypt	424	AnyEvent will start a TLS handshake as soon as the connection has been
187	data.	425	established and will transparently encrypt/decrypt data afterwards.
		426
		427	All TLS protocol errors will be signalled as C<EPROTO>, with an
		428	appropriate error message.
188		429
189	TLS mode requires Net::SSLeay to be installed (it will be loaded	430	TLS mode requires Net::SSLeay to be installed (it will be loaded
190	automatically when you try to create a TLS handle).	431	automatically when you try to create a TLS handle): this module doesn't
		432	have a dependency on that module, so if your module requires it, you have
		433	to add the dependency yourself. If Net::SSLeay cannot be loaded or is too
		434	old, you get an C<EPROTO> error.
191		435
192	For the TLS server side, use C<accept>, and for the TLS client side of a	436	Unlike TCP, TLS has a server and client side: for the TLS server side, use
193	connection, use C<connect> mode.	437	C<accept>, and for the TLS client side of a connection, use C<connect>
		438	mode.
194		439
195	You can also provide your own TLS connection object, but you have	440	You can also provide your own TLS connection object, but you have
196	to make sure that you call either C<Net::SSLeay::set_connect_state>	441	to make sure that you call either C<Net::SSLeay::set_connect_state>
197	or C<Net::SSLeay::set_accept_state> on it before you pass it to	442	or C<Net::SSLeay::set_accept_state> on it before you pass it to
198	AnyEvent::Handle.	443	AnyEvent::Handle. Also, this module will take ownership of this connection
		444	object.
199		445
		446	At some future point, AnyEvent::Handle might switch to another TLS
		447	implementation, then the option to use your own session object will go
		448	away.
		449
		450	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		451	passing in the wrong integer will lead to certain crash. This most often
		452	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		453	segmentation fault.
		454
200	See the C<starttls> method if you need to start TLs negotiation later.	455	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
201		456
202	=item tls_ctx => $ssl_ctx	457	=item tls_ctx => $anyevent_tls
203		458
204	Use the given Net::SSLeay::CTX object to create the new TLS connection	459	Use the given C<AnyEvent::TLS> object to create the new TLS connection
205	(unless a connection object was specified directly). If this parameter is	460	(unless a connection object was specified directly). If this
206	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	461	parameter is missing (or C<undef>), then AnyEvent::Handle will use
		462	C<AnyEvent::Handle::TLS_CTX>.
207		463
		464	Instead of an object, you can also specify a hash reference with C<< key
		465	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		466	new TLS context object.
		467
		468	=item on_starttls => $cb->($handle, $success[, $error_message])
		469
		470	This callback will be invoked when the TLS/SSL handshake has finished. If
		471	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		472	(C<on_stoptls> will not be called in this case).
		473
		474	The session in C<< $handle->{tls} >> can still be examined in this
		475	callback, even when the handshake was not successful.
		476
		477	TLS handshake failures will not cause C<on_error> to be invoked when this
		478	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		479
		480	Without this callback, handshake failures lead to C<on_error> being
		481	called as usual.
		482
		483	Note that you cannot just call C<starttls> again in this callback. If you
		484	need to do that, start an zero-second timer instead whose callback can
		485	then call C<< ->starttls >> again.
		486
		487	=item on_stoptls => $cb->($handle)
		488
		489	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		490	set, then it will be invoked after freeing the TLS session. If it is not,
		491	then a TLS shutdown condition will be treated like a normal EOF condition
		492	on the handle.
		493
		494	The session in C<< $handle->{tls} >> can still be examined in this
		495	callback.
		496
		497	This callback will only be called on TLS shutdowns, not when the
		498	underlying handle signals EOF.
		499
208	=item json => JSON or JSON::XS object	500	=item json => L<JSON>, L<JSON::PP> or L<JSON::XS> object
209		501
210	This is the json coder object used by the C<json> read and write types.	502	This is the json coder object used by the C<json> read and write types.
211		503
212	If you don't supply it, then AnyEvent::Handle will create and use a	504	If you don't supply it, then AnyEvent::Handle will create and use a
213	suitable one, which will write and expect UTF-8 encoded JSON texts.	505	suitable one (on demand), which will write and expect UTF-8 encoded
		506	JSON texts (either using L<JSON::XS> or L<JSON>). The written texts are
		507	guaranteed not to contain any newline character.
214		508
		509	For security reasons, this encoder will likely I<not> handle numbers and
		510	strings, only arrays and objects/hashes. The reason is that originally
		511	JSON was self-delimited, but Dougles Crockford thought it was a splendid
		512	idea to redefine JSON incompatibly, so this is no longer true.
		513
		514	For protocols that used back-to-back JSON texts, this might lead to
		515	run-ins, where two or more JSON texts will be interpreted as one JSON
		516	text.
		517
		518	For this reason, if the default encoder uses L<JSON::XS>, it will default
		519	to not allowing anything but arrays and objects/hashes, at least for the
		520	forseeable future (it will change at some point). This might or might not
		521	be true for the L<JSON> module, so this might cause a security issue.
		522
		523	If you depend on either behaviour, you should create your own json object
		524	and pass it in explicitly.
		525
		526	=item cbor => L<CBOR::XS> object
		527
		528	This is the cbor coder object used by the C<cbor> read and write types.
		529
		530	If you don't supply it, then AnyEvent::Handle will create and use a
		531	suitable one (on demand), which will write CBOR without using extensions,
		532	if possible.
		533
215	Note that you are responsible to depend on the JSON module if you want to	534	Note that you are responsible to depend on the L<CBOR::XS> module if you
216	use this functionality, as AnyEvent does not have a dependency itself.	535	want to use this functionality, as AnyEvent does not have a dependency on
217		536	it itself.
218	=item filter_r => $cb
219
220	=item filter_w => $cb
221
222	These exist, but are undocumented at this time.
223		537
224	=back	538	=back
225		539
226	=cut	540	=cut
227		541
228	sub new {	542	sub new {
229	my $class = shift;	543	my $class = shift;
230
231	my $self = bless { @_ }, $class;	544	my $self = bless { @_ }, $class;
232		545
233	$self->{fh} or Carp::croak "mandatory argument fh is missing";
234
235	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
236
237	if ($self->{tls}) {	546	if ($self->{fh}) {
238	require Net::SSLeay;	547	$self->_start;
239	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	548	return unless $self->{fh}; # could be gone by now
240	}
241		549
242	$self->{_activity} = AnyEvent->now;	550	} elsif ($self->{connect}) {
243	$self->_timeout;	551	require AnyEvent::Socket;
244		552
245	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	553	$self->{peername} = $self->{connect}[0]
		554	unless exists $self->{peername};
		555
		556	$self->{_skip_drain_rbuf} = 1;
		557
		558	{
		559	Scalar::Util::weaken (my $self = $self);
		560
		561	$self->{_connect} =
		562	AnyEvent::Socket::tcp_connect (
		563	$self->{connect}[0],
		564	$self->{connect}[1],
		565	sub {
		566	my ($fh, $host, $port, $retry) = @_;
		567
		568	delete $self->{_connect}; # no longer needed
		569
		570	if ($fh) {
		571	$self->{fh} = $fh;
		572
		573	delete $self->{_skip_drain_rbuf};
		574	$self->_start;
		575
		576	$self->{on_connect}
		577	and $self->{on_connect}($self, $host, $port, sub {
		578	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		579	$self->{_skip_drain_rbuf} = 1;
		580	&$retry;
		581	});
		582
		583	} else {
		584	if ($self->{on_connect_error}) {
		585	$self->{on_connect_error}($self, "$!");
		586	$self->destroy if $self;
		587	} else {
		588	$self->_error ($!, 1);
		589	}
		590	}
		591	},
		592	sub {
		593	local $self->{fh} = $_[0];
		594
		595	$self->{on_prepare}
		596	? $self->{on_prepare}->($self)
		597	: ()
		598	}
		599	);
		600	}
		601
		602	} else {
		603	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		604	}
246		605
247	$self	606	$self
248	}	607	}
249		608
250	sub _shutdown {	609	sub _start {
251	my ($self) = @_;	610	my ($self) = @_;
252		611
253	delete $self->{_tw};	612	# too many clueless people try to use udp and similar sockets
254	delete $self->{_rw};	613	# with AnyEvent::Handle, do them a favour.
255	delete $self->{_ww};	614	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
256	delete $self->{fh};	615	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		616	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
257		617
258	$self->stoptls;	618	AnyEvent::fh_unblock $self->{fh};
		619
		620	$self->{_activity} =
		621	$self->{_ractivity} =
		622	$self->{_wactivity} = AE::now;
		623
		624	$self->{read_size} ||= 2048;
		625	$self->{max_read_size} = $self->{read_size}
		626	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		627
		628	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		629	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		630	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		631
		632	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		633	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		634
		635	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		636
		637	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
		638	if $self->{tls};
		639
		640	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
		641
		642	$self->start_read
		643	if $self->{on_read} || @{ $self->{_queue} };
		644
		645	$self->_drain_wbuf;
259	}	646	}
260		647
261	sub _error {	648	sub _error {
262	my ($self, $errno, $fatal) = @_;	649	my ($self, $errno, $fatal, $message) = @_;
263
264	$self->_shutdown
265	if $fatal;
266		650
267	$! = $errno;	651	$! = $errno;
		652	$message ||= "$!";
268		653
269	if ($self->{on_error}) {	654	if ($self->{on_error}) {
270	$self->{on_error}($self, $fatal);	655	$self->{on_error}($self, $fatal, $message);
271	} else {	656	$self->destroy if $fatal;
		657	} elsif ($self->{fh} || $self->{connect}) {
		658	$self->destroy;
272	Carp::croak "AnyEvent::Handle uncaught error: $!";	659	Carp::croak "AnyEvent::Handle uncaught error: $message";
273	}	660	}
274	}	661	}
275		662
276	=item $fh = $handle->fh	663	=item $fh = $handle->fh
277		664
278	This method returns the file handle of the L<AnyEvent::Handle> object.	665	This method returns the file handle used to create the L<AnyEvent::Handle> object.
279		666
280	=cut	667	=cut
281		668
282	sub fh { $_[0]{fh} }	669	sub fh { $_[0]{fh} }
283		670
…		…
301	$_[0]{on_eof} = $_[1];	688	$_[0]{on_eof} = $_[1];
302	}	689	}
303		690
304	=item $handle->on_timeout ($cb)	691	=item $handle->on_timeout ($cb)
305		692
306	Replace the current C<on_timeout> callback, or disables the callback	693	=item $handle->on_rtimeout ($cb)
307	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
308	argument.
309		694
310	=cut	695	=item $handle->on_wtimeout ($cb)
311		696
		697	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
		698	callback, or disables the callback (but not the timeout) if C<$cb> =
		699	C<undef>. See the C<timeout> constructor argument and method.
		700
		701	=cut
		702
		703	# see below
		704
		705	=item $handle->autocork ($boolean)
		706
		707	Enables or disables the current autocork behaviour (see C<autocork>
		708	constructor argument). Changes will only take effect on the next write.
		709
		710	=cut
		711
		712	sub autocork {
		713	$_[0]{autocork} = $_[1];
		714	}
		715
		716	=item $handle->no_delay ($boolean)
		717
		718	Enables or disables the C<no_delay> setting (see constructor argument of
		719	the same name for details).
		720
		721	=cut
		722
		723	sub no_delay {
		724	$_[0]{no_delay} = $_[1];
		725
		726	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		727	if $_[0]{fh};
		728	}
		729
		730	=item $handle->keepalive ($boolean)
		731
		732	Enables or disables the C<keepalive> setting (see constructor argument of
		733	the same name for details).
		734
		735	=cut
		736
		737	sub keepalive {
		738	$_[0]{keepalive} = $_[1];
		739
		740	eval {
		741	local $SIG{__DIE__};
		742	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		743	if $_[0]{fh};
		744	};
		745	}
		746
		747	=item $handle->oobinline ($boolean)
		748
		749	Enables or disables the C<oobinline> setting (see constructor argument of
		750	the same name for details).
		751
		752	=cut
		753
		754	sub oobinline {
		755	$_[0]{oobinline} = $_[1];
		756
		757	eval {
		758	local $SIG{__DIE__};
		759	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		760	if $_[0]{fh};
		761	};
		762	}
		763
		764	=item $handle->on_starttls ($cb)
		765
		766	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		767
		768	=cut
		769
		770	sub on_starttls {
		771	$_[0]{on_starttls} = $_[1];
		772	}
		773
		774	=item $handle->on_stoptls ($cb)
		775
		776	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		777
		778	=cut
		779
312	sub on_timeout {	780	sub on_stoptls {
313	$_[0]{on_timeout} = $_[1];	781	$_[0]{on_stoptls} = $_[1];
		782	}
		783
		784	=item $handle->rbuf_max ($max_octets)
		785
		786	Configures the C<rbuf_max> setting (C<undef> disables it).
		787
		788	=item $handle->wbuf_max ($max_octets)
		789
		790	Configures the C<wbuf_max> setting (C<undef> disables it).
		791
		792	=cut
		793
		794	sub rbuf_max {
		795	$_[0]{rbuf_max} = $_[1];
		796	}
		797
		798	sub wbuf_max {
		799	$_[0]{wbuf_max} = $_[1];
314	}	800	}
315		801
316	#############################################################################	802	#############################################################################
317		803
318	=item $handle->timeout ($seconds)	804	=item $handle->timeout ($seconds)
319		805
		806	=item $handle->rtimeout ($seconds)
		807
		808	=item $handle->wtimeout ($seconds)
		809
320	Configures (or disables) the inactivity timeout.	810	Configures (or disables) the inactivity timeout.
321		811
322	=cut	812	The timeout will be checked instantly, so this method might destroy the
		813	handle before it returns.
323		814
324	sub timeout {	815	=item $handle->timeout_reset
		816
		817	=item $handle->rtimeout_reset
		818
		819	=item $handle->wtimeout_reset
		820
		821	Reset the activity timeout, as if data was received or sent.
		822
		823	These methods are cheap to call.
		824
		825	=cut
		826
		827	for my $dir ("", "r", "w") {
		828	my $timeout = "${dir}timeout";
		829	my $tw = "_${dir}tw";
		830	my $on_timeout = "on_${dir}timeout";
		831	my $activity = "_${dir}activity";
		832	my $cb;
		833
		834	*$on_timeout = sub {
		835	$_[0]{$on_timeout} = $_[1];
		836	};
		837
		838	*$timeout = sub {
325	my ($self, $timeout) = @_;	839	my ($self, $new_value) = @_;
326		840
		841	$new_value >= 0
		842	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		843
327	$self->{timeout} = $timeout;	844	$self->{$timeout} = $new_value;
328	$self->_timeout;	845	delete $self->{$tw}; &$cb;
329	}	846	};
330		847
		848	*{"${dir}timeout_reset"} = sub {
		849	$_[0]{$activity} = AE::now;
		850	};
		851
		852	# main workhorse:
331	# reset the timeout watcher, as neccessary	853	# reset the timeout watcher, as neccessary
332	# also check for time-outs	854	# also check for time-outs
333	sub _timeout {	855	$cb = sub {
334	my ($self) = @_;	856	my ($self) = @_;
335		857
336	if ($self->{timeout}) {	858	if ($self->{$timeout} && $self->{fh}) {
337	my $NOW = AnyEvent->now;	859	my $NOW = AE::now;
338		860
339	# when would the timeout trigger?	861	# when would the timeout trigger?
340	my $after = $self->{_activity} + $self->{timeout} - $NOW;	862	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
341		863
342	# now or in the past already?	864	# now or in the past already?
343	if ($after <= 0) {	865	if ($after <= 0) {
344	$self->{_activity} = $NOW;	866	$self->{$activity} = $NOW;
345		867
346	if ($self->{on_timeout}) {	868	if ($self->{$on_timeout}) {
347	$self->{on_timeout}($self);	869	$self->{$on_timeout}($self);
348	} else {	870	} else {
349	$self->_error (&Errno::ETIMEDOUT);	871	$self->_error (Errno::ETIMEDOUT);
		872	}
		873
		874	# callback could have changed timeout value, optimise
		875	return unless $self->{$timeout};
		876
		877	# calculate new after
		878	$after = $self->{$timeout};
350	}	879	}
351		880
352	# callback could have changed timeout value, optimise	881	Scalar::Util::weaken $self;
353	return unless $self->{timeout};	882	return unless $self; # ->error could have destroyed $self
354		883
355	# calculate new after	884	$self->{$tw} ||= AE::timer $after, 0, sub {
356	$after = $self->{timeout};	885	delete $self->{$tw};
		886	$cb->($self);
		887	};
		888	} else {
		889	delete $self->{$tw};
357	}	890	}
358
359	Scalar::Util::weaken $self;
360	return unless $self; # ->error could have destroyed $self
361
362	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
363	delete $self->{_tw};
364	$self->_timeout;
365	});
366	} else {
367	delete $self->{_tw};
368	}	891	}
369	}	892	}
370		893
371	#############################################################################	894	#############################################################################
372		895
…		…
379		902
380	The write queue is very simple: you can add data to its end, and	903	The write queue is very simple: you can add data to its end, and
381	AnyEvent::Handle will automatically try to get rid of it for you.	904	AnyEvent::Handle will automatically try to get rid of it for you.
382		905
383	When data could be written and the write buffer is shorter then the low	906	When data could be written and the write buffer is shorter then the low
384	water mark, the C<on_drain> callback will be invoked.	907	water mark, the C<on_drain> callback will be invoked once.
385		908
386	=over 4	909	=over 4
387		910
388	=item $handle->on_drain ($cb)	911	=item $handle->on_drain ($cb)
389		912
390	Sets the C<on_drain> callback or clears it (see the description of	913	Sets the C<on_drain> callback or clears it (see the description of
391	C<on_drain> in the constructor).	914	C<on_drain> in the constructor).
392		915
		916	This method may invoke callbacks (and therefore the handle might be
		917	destroyed after it returns).
		918
393	=cut	919	=cut
394		920
395	sub on_drain {	921	sub on_drain {
396	my ($self, $cb) = @_;	922	my ($self, $cb) = @_;
397		923
398	$self->{on_drain} = $cb;	924	$self->{on_drain} = $cb;
399		925
400	$cb->($self)	926	$cb->($self)
401	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	927	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
402	}	928	}
403		929
404	=item $handle->push_write ($data)	930	=item $handle->push_write ($data)
405		931
406	Queues the given scalar to be written. You can push as much data as you	932	Queues the given scalar to be written. You can push as much data as
407	want (only limited by the available memory), as C<AnyEvent::Handle>	933	you want (only limited by the available memory and C<wbuf_max>), as
408	buffers it independently of the kernel.	934	C<AnyEvent::Handle> buffers it independently of the kernel.
		935
		936	This method may invoke callbacks (and therefore the handle might be
		937	destroyed after it returns).
409		938
410	=cut	939	=cut
411		940
412	sub _drain_wbuf {	941	sub _drain_wbuf {
413	my ($self) = @_;	942	my ($self) = @_;
…		…
417	Scalar::Util::weaken $self;	946	Scalar::Util::weaken $self;
418		947
419	my $cb = sub {	948	my $cb = sub {
420	my $len = syswrite $self->{fh}, $self->{wbuf};	949	my $len = syswrite $self->{fh}, $self->{wbuf};
421		950
422	if ($len >= 0) {	951	if (defined $len) {
423	substr $self->{wbuf}, 0, $len, "";	952	substr $self->{wbuf}, 0, $len, "";
424		953
425	$self->{_activity} = AnyEvent->now;	954	$self->{_activity} = $self->{_wactivity} = AE::now;
426		955
427	$self->{on_drain}($self)	956	$self->{on_drain}($self)
428	if $self->{low_water_mark} >= length $self->{wbuf}	957	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
429	&& $self->{on_drain};	958	&& $self->{on_drain};
430		959
431	delete $self->{_ww} unless length $self->{wbuf};	960	delete $self->{_ww} unless length $self->{wbuf};
432	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	961	} elsif ($! != EAGAIN && $! != EINTR && $! != EWOULDBLOCK && $! != WSAEWOULDBLOCK) {
433	$self->_error ($!, 1);	962	$self->_error ($!, 1);
434	}	963	}
435	};	964	};
436		965
437	# try to write data immediately	966	# try to write data immediately
438	$cb->();	967	$cb->() unless $self->{autocork};
439		968
440	# if still data left in wbuf, we need to poll	969	# if still data left in wbuf, we need to poll
441	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	970	$self->{_ww} = AE::io $self->{fh}, 1, $cb
442	if length $self->{wbuf};	971	if length $self->{wbuf};
		972
		973	if (
		974	defined $self->{wbuf_max}
		975	&& $self->{wbuf_max} < length $self->{wbuf}
		976	) {
		977	$self->_error (Errno::ENOSPC, 1), return;
		978	}
443	};	979	};
444	}	980	}
445		981
446	our %WH;	982	our %WH;
447		983
		984	# deprecated
448	sub register_write_type($$) {	985	sub register_write_type($$) {
449	$WH{$_[0]} = $_[1];	986	$WH{$_[0]} = $_[1];
450	}	987	}
451		988
452	sub push_write {	989	sub push_write {
453	my $self = shift;	990	my $self = shift;
454		991
455	if (@_ > 1) {	992	if (@_ > 1) {
456	my $type = shift;	993	my $type = shift;
457		994
		995	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
458	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	996	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
459	->($self, @_);	997	->($self, @_);
460	}	998	}
461		999
		1000	# we downgrade here to avoid hard-to-track-down bugs,
		1001	# and diagnose the problem earlier and better.
		1002
462	if ($self->{filter_w}) {	1003	if ($self->{tls}) {
463	$self->{filter_w}($self, \$_[0]);	1004	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
		1005	&_dotls ($self) if $self->{fh};
464	} else {	1006	} else {
465	$self->{wbuf} .= $_[0];	1007	utf8::downgrade $self->{wbuf} .= $_[0];
466	$self->_drain_wbuf;	1008	$self->_drain_wbuf if $self->{fh};
467	}	1009	}
468	}	1010	}
469		1011
470	=item $handle->push_write (type => @args)	1012	=item $handle->push_write (type => @args)
471		1013
472	Instead of formatting your data yourself, you can also let this module do	1014	Instead of formatting your data yourself, you can also let this module
473	the job by specifying a type and type-specific arguments.	1015	do the job by specifying a type and type-specific arguments. You
		1016	can also specify the (fully qualified) name of a package, in which
		1017	case AnyEvent tries to load the package and then expects to find the
		1018	C<anyevent_write_type> function inside (see "custom write types", below).
474		1019
475	Predefined types are (if you have ideas for additional types, feel free to	1020	Predefined types are (if you have ideas for additional types, feel free to
476	drop by and tell us):	1021	drop by and tell us):
477		1022
478	=over 4	1023	=over 4
…		…
485	=cut	1030	=cut
486		1031
487	register_write_type netstring => sub {	1032	register_write_type netstring => sub {
488	my ($self, $string) = @_;	1033	my ($self, $string) = @_;
489		1034
490	sprintf "%d:%s,", (length $string), $string	1035	(length $string) . ":$string,"
491	};	1036	};
492		1037
493	=item packstring => $format, $data	1038	=item packstring => $format, $data
494		1039
495	An octet string prefixed with an encoded length. The encoding C<$format>	1040	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
500	=cut	1045	=cut
501		1046
502	register_write_type packstring => sub {	1047	register_write_type packstring => sub {
503	my ($self, $format, $string) = @_;	1048	my ($self, $format, $string) = @_;
504		1049
505	pack "$format/a", $string	1050	pack "$format/a*", $string
506	};	1051	};
507		1052
508	=item json => $array_or_hashref	1053	=item json => $array_or_hashref
509		1054
510	Encodes the given hash or array reference into a JSON object. Unless you	1055	Encodes the given hash or array reference into a JSON object. Unless you
511	provide your own JSON object, this means it will be encoded to JSON text	1056	provide your own JSON object, this means it will be encoded to JSON text
512	in UTF-8.	1057	in UTF-8.
513		1058
		1059	The default encoder might or might not handle every type of JSON value -
		1060	it might be limited to arrays and objects for security reasons. See the
		1061	C<json> constructor attribute for more details.
		1062
514	JSON objects (and arrays) are self-delimiting, so you can write JSON at	1063	JSON objects (and arrays) are self-delimiting, so if you only use arrays
515	one end of a handle and read them at the other end without using any	1064	and hashes, you can write JSON at one end of a handle and read them at the
516	additional framing.	1065	other end without using any additional framing.
517		1066
518	The generated JSON text is guaranteed not to contain any newlines: While	1067	The JSON text generated by the default encoder is guaranteed not to
519	this module doesn't need delimiters after or between JSON texts to be	1068	contain any newlines: While this module doesn't need delimiters after or
520	able to read them, many other languages depend on that.	1069	between JSON texts to be able to read them, many other languages depend on
		1070	them.
521		1071
522	A simple RPC protocol that interoperates easily with others is to send	1072	A simple RPC protocol that interoperates easily with other languages is
523	JSON arrays (or objects, although arrays are usually the better choice as	1073	to send JSON arrays (or objects, although arrays are usually the better
524	they mimic how function argument passing works) and a newline after each	1074	choice as they mimic how function argument passing works) and a newline
525	JSON text:	1075	after each JSON text:
526		1076
527	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever	1077	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
528	$handle->push_write ("\012");	1078	$handle->push_write ("\012");
529		1079
530	An AnyEvent::Handle receiver would simply use the C<json> read type and	1080	An AnyEvent::Handle receiver would simply use the C<json> read type and
…		…
533	$handle->push_read (json => sub { my $array = $_[1]; ... });	1083	$handle->push_read (json => sub { my $array = $_[1]; ... });
534		1084
535	Other languages could read single lines terminated by a newline and pass	1085	Other languages could read single lines terminated by a newline and pass
536	this line into their JSON decoder of choice.	1086	this line into their JSON decoder of choice.
537		1087
		1088	=item cbor => $perl_scalar
		1089
		1090	Encodes the given scalar into a CBOR value. Unless you provide your own
		1091	L<CBOR::XS> object, this means it will be encoded to a CBOR string not
		1092	using any extensions, if possible.
		1093
		1094	CBOR values are self-delimiting, so you can write CBOR at one end of
		1095	a handle and read them at the other end without using any additional
		1096	framing.
		1097
		1098	A simple nd very very fast RPC protocol that interoperates with
		1099	other languages is to send CBOR and receive CBOR values (arrays are
		1100	recommended):
		1101
		1102	$handle->push_write (cbor => ["method", "arg1", "arg2"]); # whatever
		1103
		1104	An AnyEvent::Handle receiver would simply use the C<cbor> read type:
		1105
		1106	$handle->push_read (cbor => sub { my $array = $_[1]; ... });
		1107
538	=cut	1108	=cut
		1109
		1110	sub json_coder() {
		1111	eval { require JSON::XS; JSON::XS->new->utf8 }
		1112	|| do { require JSON::PP; JSON::PP->new->utf8 }
		1113	}
539		1114
540	register_write_type json => sub {	1115	register_write_type json => sub {
541	my ($self, $ref) = @_;	1116	my ($self, $ref) = @_;
542		1117
543	require JSON;	1118	($self->{json} ||= json_coder)
		1119	->encode ($ref)
		1120	};
544		1121
545	$self->{json} ? $self->{json}->encode ($ref)	1122	sub cbor_coder() {
546	: JSON::encode_json ($ref)	1123	require CBOR::XS;
		1124	CBOR::XS->new
		1125	}
		1126
		1127	register_write_type cbor => sub {
		1128	my ($self, $scalar) = @_;
		1129
		1130	($self->{cbor} ||= cbor_coder)
		1131	->encode ($scalar)
547	};	1132	};
548		1133
549	=item storable => $reference	1134	=item storable => $reference
550		1135
551	Freezes the given reference using L<Storable> and writes it to the	1136	Freezes the given reference using L<Storable> and writes it to the
…		…
554	=cut	1139	=cut
555		1140
556	register_write_type storable => sub {	1141	register_write_type storable => sub {
557	my ($self, $ref) = @_;	1142	my ($self, $ref) = @_;
558		1143
559	require Storable;	1144	require Storable unless $Storable::VERSION;
560		1145
561	pack "w/a", Storable::nfreeze ($ref)	1146	pack "w/a*", Storable::nfreeze ($ref)
562	};	1147	};
563		1148
564	=back	1149	=back
565		1150
566	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1151	=item $handle->push_shutdown
567		1152
568	This function (not method) lets you add your own types to C<push_write>.	1153	Sometimes you know you want to close the socket after writing your data
		1154	before it was actually written. One way to do that is to replace your
		1155	C<on_drain> handler by a callback that shuts down the socket (and set
		1156	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1157	replaces the C<on_drain> callback with:
		1158
		1159	sub { shutdown $_[0]{fh}, 1 }
		1160
		1161	This simply shuts down the write side and signals an EOF condition to the
		1162	the peer.
		1163
		1164	You can rely on the normal read queue and C<on_eof> handling
		1165	afterwards. This is the cleanest way to close a connection.
		1166
		1167	This method may invoke callbacks (and therefore the handle might be
		1168	destroyed after it returns).
		1169
		1170	=cut
		1171
		1172	sub push_shutdown {
		1173	my ($self) = @_;
		1174
		1175	delete $self->{low_water_mark};
		1176	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1177	}
		1178
		1179	=item custom write types - Package::anyevent_write_type $handle, @args
		1180
		1181	Instead of one of the predefined types, you can also specify the name of
		1182	a package. AnyEvent will try to load the package and then expects to find
		1183	a function named C<anyevent_write_type> inside. If it isn't found, it
		1184	progressively tries to load the parent package until it either finds the
		1185	function (good) or runs out of packages (bad).
		1186
569	Whenever the given C<type> is used, C<push_write> will invoke the code	1187	Whenever the given C<type> is used, C<push_write> will the function with
570	reference with the handle object and the remaining arguments.	1188	the handle object and the remaining arguments.
571		1189
572	The code reference is supposed to return a single octet string that will	1190	The function is supposed to return a single octet string that will be
573	be appended to the write buffer.	1191	appended to the write buffer, so you can mentally treat this function as a
		1192	"arguments to on-the-wire-format" converter.
574		1193
575	Note that this is a function, and all types registered this way will be	1194	Example: implement a custom write type C<join> that joins the remaining
576	global, so try to use unique names.	1195	arguments using the first one.
		1196
		1197	$handle->push_write (My::Type => " ", 1,2,3);
		1198
		1199	# uses the following package, which can be defined in the "My::Type" or in
		1200	# the "My" modules to be auto-loaded, or just about anywhere when the
		1201	# My::Type::anyevent_write_type is defined before invoking it.
		1202
		1203	package My::Type;
		1204
		1205	sub anyevent_write_type {
		1206	my ($handle, $delim, @args) = @_;
		1207
		1208	join $delim, @args
		1209	}
577		1210
578	=cut	1211	=cut
579		1212
580	#############################################################################	1213	#############################################################################
581		1214
…		…
590	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1223	ways, the "simple" way, using only C<on_read> and the "complex" way, using
591	a queue.	1224	a queue.
592		1225
593	In the simple case, you just install an C<on_read> callback and whenever	1226	In the simple case, you just install an C<on_read> callback and whenever
594	new data arrives, it will be called. You can then remove some data (if	1227	new data arrives, it will be called. You can then remove some data (if
595	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	1228	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
596	or not.	1229	leave the data there if you want to accumulate more (e.g. when only a
		1230	partial message has been received so far), or change the read queue with
		1231	e.g. C<push_read>.
597		1232
598	In the more complex case, you want to queue multiple callbacks. In this	1233	In the more complex case, you want to queue multiple callbacks. In this
599	case, AnyEvent::Handle will call the first queued callback each time new	1234	case, AnyEvent::Handle will call the first queued callback each time new
600	data arrives (also the first time it is queued) and removes it when it has	1235	data arrives (also the first time it is queued) and remove it when it has
601	done its job (see C<push_read>, below).	1236	done its job (see C<push_read>, below).
602		1237
603	This way you can, for example, push three line-reads, followed by reading	1238	This way you can, for example, push three line-reads, followed by reading
604	a chunk of data, and AnyEvent::Handle will execute them in order.	1239	a chunk of data, and AnyEvent::Handle will execute them in order.
605		1240
…		…
619	# handle xml	1254	# handle xml
620	});	1255	});
621	});	1256	});
622	});	1257	});
623		1258
624	Example 2: Implement a client for a protocol that replies either with	1259	Example 2: Implement a client for a protocol that replies either with "OK"
625	"OK" and another line or "ERROR" for one request, and 64 bytes for the	1260	and another line or "ERROR" for the first request that is sent, and 64
626	second request. Due tot he availability of a full queue, we can just	1261	bytes for the second request. Due to the availability of a queue, we can
627	pipeline sending both requests and manipulate the queue as necessary in	1262	just pipeline sending both requests and manipulate the queue as necessary
628	the callbacks:	1263	in the callbacks.
629		1264
630	# request one	1265	When the first callback is called and sees an "OK" response, it will
		1266	C<unshift> another line-read. This line-read will be queued I<before> the
		1267	64-byte chunk callback.
		1268
		1269	# request one, returns either "OK + extra line" or "ERROR"
631	$handle->push_write ("request 1\015\012");	1270	$handle->push_write ("request 1\015\012");
632		1271
633	# we expect "ERROR" or "OK" as response, so push a line read	1272	# we expect "ERROR" or "OK" as response, so push a line read
634	$handle->push_read (line => sub {	1273	$handle->push_read (line => sub {
635	# if we got an "OK", we have to _prepend_ another line,	1274	# if we got an "OK", we have to _prepend_ another line,
…		…
642	...	1281	...
643	});	1282	});
644	}	1283	}
645	});	1284	});
646		1285
647	# request two	1286	# request two, simply returns 64 octets
648	$handle->push_write ("request 2\015\012");	1287	$handle->push_write ("request 2\015\012");
649		1288
650	# simply read 64 bytes, always	1289	# simply read 64 bytes, always
651	$handle->push_read (chunk => 64, sub {	1290	$handle->push_read (chunk => 64, sub {
652	my $response = $_[1];	1291	my $response = $_[1];
…		…
658	=cut	1297	=cut
659		1298
660	sub _drain_rbuf {	1299	sub _drain_rbuf {
661	my ($self) = @_;	1300	my ($self) = @_;
662		1301
		1302	# avoid recursion
		1303	return if $self->{_skip_drain_rbuf};
663	local $self->{_in_drain} = 1;	1304	local $self->{_skip_drain_rbuf} = 1;
664
665	if (
666	defined $self->{rbuf_max}
667	&& $self->{rbuf_max} < length $self->{rbuf}
668	) {
669	return $self->_error (&Errno::ENOSPC, 1);
670	}
671		1305
672	while () {	1306	while () {
673	no strict 'refs';	1307	# we need to use a separate tls read buffer, as we must not receive data while
		1308	# we are draining the buffer, and this can only happen with TLS.
		1309	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1310	if exists $self->{_tls_rbuf};
674		1311
675	my $len = length $self->{rbuf};	1312	my $len = length $self->{rbuf};
676		1313
677	if (my $cb = shift @{ $self->{_queue} }) {	1314	if (my $cb = shift @{ $self->{_queue} }) {
678	unless ($cb->($self)) {	1315	unless ($cb->($self)) {
679	if ($self->{_eof}) {	1316	# no progress can be made
680	# no progress can be made (not enough data and no data forthcoming)	1317	# (not enough data and no data forthcoming)
681	$self->_error (&Errno::EPIPE, 1), last;	1318	$self->_error (Errno::EPIPE, 1), return
682	}	1319	if $self->{_eof};
683		1320
684	unshift @{ $self->{_queue} }, $cb;	1321	unshift @{ $self->{_queue} }, $cb;
685	last;	1322	last;
686	}	1323	}
687	} elsif ($self->{on_read}) {	1324	} elsif ($self->{on_read}) {
…		…
694	&& !@{ $self->{_queue} } # and the queue is still empty	1331	&& !@{ $self->{_queue} } # and the queue is still empty
695	&& $self->{on_read} # but we still have on_read	1332	&& $self->{on_read} # but we still have on_read
696	) {	1333	) {
697	# no further data will arrive	1334	# no further data will arrive
698	# so no progress can be made	1335	# so no progress can be made
699	$self->_error (&Errno::EPIPE, 1), last	1336	$self->_error (Errno::EPIPE, 1), return
700	if $self->{_eof};	1337	if $self->{_eof};
701		1338
702	last; # more data might arrive	1339	last; # more data might arrive
703	}	1340	}
704	} else {	1341	} else {
705	# read side becomes idle	1342	# read side becomes idle
706	delete $self->{_rw};	1343	delete $self->{_rw} unless $self->{tls};
707	last;	1344	last;
708	}	1345	}
709	}	1346	}
710		1347
		1348	if ($self->{_eof}) {
		1349	$self->{on_eof}
711	$self->{on_eof}($self)	1350	? $self->{on_eof}($self)
712	if $self->{_eof} && $self->{on_eof};	1351	: $self->_error (0, 1, "Unexpected end-of-file");
		1352
		1353	return;
		1354	}
		1355
		1356	if (
		1357	defined $self->{rbuf_max}
		1358	&& $self->{rbuf_max} < length $self->{rbuf}
		1359	) {
		1360	$self->_error (Errno::ENOSPC, 1), return;
		1361	}
713		1362
714	# may need to restart read watcher	1363	# may need to restart read watcher
715	unless ($self->{_rw}) {	1364	unless ($self->{_rw}) {
716	$self->start_read	1365	$self->start_read
717	if $self->{on_read} || @{ $self->{_queue} };	1366	if $self->{on_read} || @{ $self->{_queue} };
…		…
722		1371
723	This replaces the currently set C<on_read> callback, or clears it (when	1372	This replaces the currently set C<on_read> callback, or clears it (when
724	the new callback is C<undef>). See the description of C<on_read> in the	1373	the new callback is C<undef>). See the description of C<on_read> in the
725	constructor.	1374	constructor.
726		1375
		1376	This method may invoke callbacks (and therefore the handle might be
		1377	destroyed after it returns).
		1378
727	=cut	1379	=cut
728		1380
729	sub on_read {	1381	sub on_read {
730	my ($self, $cb) = @_;	1382	my ($self, $cb) = @_;
731		1383
732	$self->{on_read} = $cb;	1384	$self->{on_read} = $cb;
733	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1385	$self->_drain_rbuf if $cb;
734	}	1386	}
735		1387
736	=item $handle->rbuf	1388	=item $handle->rbuf
737		1389
738	Returns the read buffer (as a modifiable lvalue).	1390	Returns the read buffer (as a modifiable lvalue). You can also access the
		1391	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1392	much faster, and no less clean).
739		1393
740	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1394	The only operation allowed on the read buffer (apart from looking at it)
741	you want.	1395	is removing data from its beginning. Otherwise modifying or appending to
		1396	it is not allowed and will lead to hard-to-track-down bugs.
742		1397
743	NOTE: The read buffer should only be used or modified if the C<on_read>,	1398	NOTE: The read buffer should only be used or modified in the C<on_read>
744	C<push_read> or C<unshift_read> methods are used. The other read methods	1399	callback or when C<push_read> or C<unshift_read> are used with a single
745	automatically manage the read buffer.	1400	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1401	will manage the read buffer on their own.
746		1402
747	=cut	1403	=cut
748		1404
749	sub rbuf : lvalue {	1405	sub rbuf : lvalue {
750	$_[0]{rbuf}	1406	$_[0]{rbuf}
…		…
767		1423
768	If enough data was available, then the callback must remove all data it is	1424	If enough data was available, then the callback must remove all data it is
769	interested in (which can be none at all) and return a true value. After returning	1425	interested in (which can be none at all) and return a true value. After returning
770	true, it will be removed from the queue.	1426	true, it will be removed from the queue.
771		1427
		1428	These methods may invoke callbacks (and therefore the handle might be
		1429	destroyed after it returns).
		1430
772	=cut	1431	=cut
773		1432
774	our %RH;	1433	our %RH;
775		1434
776	sub register_read_type($$) {	1435	sub register_read_type($$) {
…		…
782	my $cb = pop;	1441	my $cb = pop;
783		1442
784	if (@_) {	1443	if (@_) {
785	my $type = shift;	1444	my $type = shift;
786		1445
		1446	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
787	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1447	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
788	->($self, $cb, @_);	1448	->($self, $cb, @_);
789	}	1449	}
790		1450
791	push @{ $self->{_queue} }, $cb;	1451	push @{ $self->{_queue} }, $cb;
792	$self->_drain_rbuf unless $self->{_in_drain};	1452	$self->_drain_rbuf;
793	}	1453	}
794		1454
795	sub unshift_read {	1455	sub unshift_read {
796	my $self = shift;	1456	my $self = shift;
797	my $cb = pop;	1457	my $cb = pop;
798		1458
799	if (@_) {	1459	if (@_) {
800	my $type = shift;	1460	my $type = shift;
801		1461
		1462	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
802	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1463	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
803	->($self, $cb, @_);	1464	->($self, $cb, @_);
804	}	1465	}
805		1466
806
807	unshift @{ $self->{_queue} }, $cb;	1467	unshift @{ $self->{_queue} }, $cb;
808	$self->_drain_rbuf unless $self->{_in_drain};	1468	$self->_drain_rbuf;
809	}	1469	}
810		1470
811	=item $handle->push_read (type => @args, $cb)	1471	=item $handle->push_read (type => @args, $cb)
812		1472
813	=item $handle->unshift_read (type => @args, $cb)	1473	=item $handle->unshift_read (type => @args, $cb)
814		1474
815	Instead of providing a callback that parses the data itself you can chose	1475	Instead of providing a callback that parses the data itself you can chose
816	between a number of predefined parsing formats, for chunks of data, lines	1476	between a number of predefined parsing formats, for chunks of data, lines
817	etc.	1477	etc. You can also specify the (fully qualified) name of a package, in
		1478	which case AnyEvent tries to load the package and then expects to find the
		1479	C<anyevent_read_type> function inside (see "custom read types", below).
818		1480
819	Predefined types are (if you have ideas for additional types, feel free to	1481	Predefined types are (if you have ideas for additional types, feel free to
820	drop by and tell us):	1482	drop by and tell us):
821		1483
822	=over 4	1484	=over 4
…		…
828	data.	1490	data.
829		1491
830	Example: read 2 bytes.	1492	Example: read 2 bytes.
831		1493
832	$handle->push_read (chunk => 2, sub {	1494	$handle->push_read (chunk => 2, sub {
833	warn "yay ", unpack "H*", $_[1];	1495	say "yay " . unpack "H*", $_[1];
834	});	1496	});
835		1497
836	=cut	1498	=cut
837		1499
838	register_read_type chunk => sub {	1500	register_read_type chunk => sub {
…		…
843	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1505	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
844	1	1506	1
845	}	1507	}
846	};	1508	};
847		1509
848	# compatibility with older API
849	sub push_read_chunk {
850	$_[0]->push_read (chunk => $_[1], $_[2]);
851	}
852
853	sub unshift_read_chunk {
854	$_[0]->unshift_read (chunk => $_[1], $_[2]);
855	}
856
857	=item line => [$eol, ]$cb->($handle, $line, $eol)	1510	=item line => [$eol, ]$cb->($handle, $line, $eol)
858		1511
859	The callback will be called only once a full line (including the end of	1512	The callback will be called only once a full line (including the end of
860	line marker, C<$eol>) has been read. This line (excluding the end of line	1513	line marker, C<$eol>) has been read. This line (excluding the end of line
861	marker) will be passed to the callback as second argument (C<$line>), and	1514	marker) will be passed to the callback as second argument (C<$line>), and
…		…
876	=cut	1529	=cut
877		1530
878	register_read_type line => sub {	1531	register_read_type line => sub {
879	my ($self, $cb, $eol) = @_;	1532	my ($self, $cb, $eol) = @_;
880		1533
881	$eol = qr|(\015?\012)| if @_ < 3;	1534	if (@_ < 3) {
		1535	# this is faster then the generic code below
		1536	sub {
		1537	(my $pos = index $_[0]{rbuf}, "\012") >= 0
		1538	or return;
		1539
		1540	(my $str = substr $_[0]{rbuf}, 0, $pos + 1, "") =~ s/(\015?\012)\Z// or die;
		1541	$cb->($_[0], $str, "$1");
		1542	1
		1543	}
		1544	} else {
882	$eol = quotemeta $eol unless ref $eol;	1545	$eol = quotemeta $eol unless ref $eol;
883	$eol = qr|^(.*?)($eol)|s;	1546	$eol = qr|^(.*?)($eol)|s;
884		1547
885	sub {	1548	sub {
886	$_[0]{rbuf} =~ s/$eol// or return;	1549	$_[0]{rbuf} =~ s/$eol// or return;
887		1550
888	$cb->($_[0], $1, $2);	1551	$cb->($_[0], "$1", "$2");
		1552	1
889	1	1553	}
890	}	1554	}
891	};	1555	};
892		1556
893	# compatibility with older API
894	sub push_read_line {
895	my $self = shift;
896	$self->push_read (line => @_);
897	}
898
899	sub unshift_read_line {
900	my $self = shift;
901	$self->unshift_read (line => @_);
902	}
903
904	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1557	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
905		1558
906	Makes a regex match against the regex object C<$accept> and returns	1559	Makes a regex match against the regex object C<$accept> and returns
907	everything up to and including the match.	1560	everything up to and including the match. All the usual regex variables
		1561	($1, %+ etc.) from the regex match are available in the callback.
908		1562
909	Example: read a single line terminated by '\n'.	1563	Example: read a single line terminated by '\n'.
910		1564
911	$handle->push_read (regex => qr<\n>, sub { ... });	1565	$handle->push_read (regex => qr<\n>, sub { ... });
912		1566
…		…
925	the receive buffer when neither C<$accept> nor C<$reject> match,	1579	the receive buffer when neither C<$accept> nor C<$reject> match,
926	and everything preceding and including the match will be accepted	1580	and everything preceding and including the match will be accepted
927	unconditionally. This is useful to skip large amounts of data that you	1581	unconditionally. This is useful to skip large amounts of data that you
928	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1582	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
929	have to start matching from the beginning. This is purely an optimisation	1583	have to start matching from the beginning. This is purely an optimisation
930	and is usually worth only when you expect more than a few kilobytes.	1584	and is usually worth it only when you expect more than a few kilobytes.
931		1585
932	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1586	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
933	expect the header to be very large (it isn't in practise, but...), we use	1587	expect the header to be very large (it isn't in practice, but...), we use
934	a skip regex to skip initial portions. The skip regex is tricky in that	1588	a skip regex to skip initial portions. The skip regex is tricky in that
935	it only accepts something not ending in either \015 or \012, as these are	1589	it only accepts something not ending in either \015 or \012, as these are
936	required for the accept regex.	1590	required for the accept regex.
937		1591
938	$handle->push_read (regex =>	1592	$handle->push_read (regex =>
…		…
951		1605
952	sub {	1606	sub {
953	# accept	1607	# accept
954	if ($$rbuf =~ $accept) {	1608	if ($$rbuf =~ $accept) {
955	$data .= substr $$rbuf, 0, $+[0], "";	1609	$data .= substr $$rbuf, 0, $+[0], "";
956	$cb->($self, $data);	1610	$cb->($_[0], $data);
957	return 1;	1611	return 1;
958	}	1612	}
959		1613
960	# reject	1614	# reject
961	if ($reject && $$rbuf =~ $reject) {	1615	if ($reject && $$rbuf =~ $reject) {
962	$self->_error (&Errno::EBADMSG);	1616	$_[0]->_error (Errno::EBADMSG);
963	}	1617	}
964		1618
965	# skip	1619	# skip
966	if ($skip && $$rbuf =~ $skip) {	1620	if ($skip && $$rbuf =~ $skip) {
967	$data .= substr $$rbuf, 0, $+[0], "";	1621	$data .= substr $$rbuf, 0, $+[0], "";
…		…
983	my ($self, $cb) = @_;	1637	my ($self, $cb) = @_;
984		1638
985	sub {	1639	sub {
986	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1640	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
987	if ($_[0]{rbuf} =~ /[^0-9]/) {	1641	if ($_[0]{rbuf} =~ /[^0-9]/) {
988	$self->_error (&Errno::EBADMSG);	1642	$_[0]->_error (Errno::EBADMSG);
989	}	1643	}
990	return;	1644	return;
991	}	1645	}
992		1646
993	my $len = $1;	1647	my $len = $1;
994		1648
995	$self->unshift_read (chunk => $len, sub {	1649	$_[0]->unshift_read (chunk => $len, sub {
996	my $string = $_[1];	1650	my $string = $_[1];
997	$_[0]->unshift_read (chunk => 1, sub {	1651	$_[0]->unshift_read (chunk => 1, sub {
998	if ($_[1] eq ",") {	1652	if ($_[1] eq ",") {
999	$cb->($_[0], $string);	1653	$cb->($_[0], $string);
1000	} else {	1654	} else {
1001	$self->_error (&Errno::EBADMSG);	1655	$_[0]->_error (Errno::EBADMSG);
1002	}	1656	}
1003	});	1657	});
1004	});	1658	});
1005		1659
1006	1	1660	1
…		…
1012	An octet string prefixed with an encoded length. The encoding C<$format>	1666	An octet string prefixed with an encoded length. The encoding C<$format>
1013	uses the same format as a Perl C<pack> format, but must specify a single	1667	uses the same format as a Perl C<pack> format, but must specify a single
1014	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1668	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1015	optional C<!>, C<< < >> or C<< > >> modifier).	1669	optional C<!>, C<< < >> or C<< > >> modifier).
1016		1670
1017	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1671	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1672	EPP uses a prefix of C<N> (4 octtes).
1018		1673
1019	Example: read a block of data prefixed by its length in BER-encoded	1674	Example: read a block of data prefixed by its length in BER-encoded
1020	format (very efficient).	1675	format (very efficient).
1021		1676
1022	$handle->push_read (packstring => "w", sub {	1677	$handle->push_read (packstring => "w", sub {
…		…
1028	register_read_type packstring => sub {	1683	register_read_type packstring => sub {
1029	my ($self, $cb, $format) = @_;	1684	my ($self, $cb, $format) = @_;
1030		1685
1031	sub {	1686	sub {
1032	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1687	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1033	defined (my $len = eval { unpack $format, $_[0]->{rbuf} })	1688	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
1034	or return;	1689	or return;
1035		1690
		1691	$format = length pack $format, $len;
		1692
		1693	# bypass unshift if we already have the remaining chunk
		1694	if ($format + $len <= length $_[0]{rbuf}) {
		1695	my $data = substr $_[0]{rbuf}, $format, $len;
		1696	substr $_[0]{rbuf}, 0, $format + $len, "";
		1697	$cb->($_[0], $data);
		1698	} else {
1036	# remove prefix	1699	# remove prefix
1037	substr $_[0]->{rbuf}, 0, (length pack $format, $len), "";	1700	substr $_[0]{rbuf}, 0, $format, "";
1038		1701
1039	# read rest	1702	# read remaining chunk
1040	$_[0]->unshift_read (chunk => $len, $cb);	1703	$_[0]->unshift_read (chunk => $len, $cb);
		1704	}
1041		1705
1042	1	1706	1
1043	}	1707	}
1044	};	1708	};
1045		1709
1046	=item json => $cb->($handle, $hash_or_arrayref)	1710	=item json => $cb->($handle, $hash_or_arrayref)
1047		1711
1048	Reads a JSON object or array, decodes it and passes it to the callback.	1712	Reads a JSON object or array, decodes it and passes it to the
		1713	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1049		1714
1050	If a C<json> object was passed to the constructor, then that will be used	1715	If a C<json> object was passed to the constructor, then that will be
1051	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1716	used for the final decode, otherwise it will create a L<JSON::XS> or
		1717	L<JSON::PP> coder object expecting UTF-8.
1052		1718
1053	This read type uses the incremental parser available with JSON version	1719	This read type uses the incremental parser available with JSON version
1054	2.09 (and JSON::XS version 2.2) and above. You have to provide a	1720	2.09 (and JSON::XS version 2.2) and above.
1055	dependency on your own: this module will load the JSON module, but
1056	AnyEvent does not depend on it itself.
1057		1721
1058	Since JSON texts are fully self-delimiting, the C<json> read and write	1722	Since JSON texts are fully self-delimiting, the C<json> read and write
1059	types are an ideal simple RPC protocol: just exchange JSON datagrams. See	1723	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
1060	the C<json> write type description, above, for an actual example.	1724	the C<json> write type description, above, for an actual example.
1061		1725
1062	=cut	1726	=cut
1063		1727
1064	register_read_type json => sub {	1728	register_read_type json => sub {
1065	my ($self, $cb) = @_;	1729	my ($self, $cb) = @_;
1066		1730
1067	require JSON;	1731	my $json = $self->{json} ||= json_coder;
1068		1732
1069	my $data;	1733	my $data;
1070	my $rbuf = \$self->{rbuf};
1071
1072	my $json = $self->{json} ||= JSON->new->utf8;
1073		1734
1074	sub {	1735	sub {
1075	my $ref = $json->incr_parse ($self->{rbuf});	1736	my $ref = eval { $json->incr_parse ($_[0]{rbuf}) };
1076		1737
1077	if ($ref) {	1738	if ($ref) {
1078	$self->{rbuf} = $json->incr_text;	1739	$_[0]{rbuf} = $json->incr_text;
1079	$json->incr_text = "";	1740	$json->incr_text = "";
1080	$cb->($self, $ref);	1741	$cb->($_[0], $ref);
1081		1742
1082	1	1743	1
		1744	} elsif ($@) {
		1745	# error case
		1746	$json->incr_skip;
		1747
		1748	$_[0]{rbuf} = $json->incr_text;
		1749	$json->incr_text = "";
		1750
		1751	$_[0]->_error (Errno::EBADMSG);
		1752
		1753	()
1083	} else {	1754	} else {
1084	$self->{rbuf} = "";	1755	$_[0]{rbuf} = "";
		1756
		1757	()
		1758	}
		1759	}
		1760	};
		1761
		1762	=item cbor => $cb->($handle, $scalar)
		1763
		1764	Reads a CBOR value, decodes it and passes it to the callback. When a parse
		1765	error occurs, an C<EBADMSG> error will be raised.
		1766
		1767	If a L<CBOR::XS> object was passed to the constructor, then that will be
		1768	used for the final decode, otherwise it will create a CBOR coder without
		1769	enabling any options.
		1770
		1771	You have to provide a dependency to L<CBOR::XS> on your own: this module
		1772	will load the L<CBOR::XS> module, but AnyEvent does not depend on it
		1773	itself.
		1774
		1775	Since CBOR values are fully self-delimiting, the C<cbor> read and write
		1776	types are an ideal simple RPC protocol: just exchange CBOR datagrams. See
		1777	the C<cbor> write type description, above, for an actual example.
		1778
		1779	=cut
		1780
		1781	register_read_type cbor => sub {
		1782	my ($self, $cb) = @_;
		1783
		1784	my $cbor = $self->{cbor} ||= cbor_coder;
		1785
		1786	my $data;
		1787
		1788	sub {
		1789	my (@value) = eval { $cbor->incr_parse ($_[0]{rbuf}) };
		1790
		1791	if (@value) {
		1792	$cb->($_[0], @value);
		1793
		1794	1
		1795	} elsif ($@) {
		1796	# error case
		1797	$cbor->incr_reset;
		1798
		1799	$_[0]->_error (Errno::EBADMSG);
		1800
		1801	()
		1802	} else {
1085	()	1803	()
1086	}	1804	}
1087	}	1805	}
1088	};	1806	};
1089		1807
…		…
1098	=cut	1816	=cut
1099		1817
1100	register_read_type storable => sub {	1818	register_read_type storable => sub {
1101	my ($self, $cb) = @_;	1819	my ($self, $cb) = @_;
1102		1820
1103	require Storable;	1821	require Storable unless $Storable::VERSION;
1104		1822
1105	sub {	1823	sub {
1106	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1824	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1107	defined (my $len = eval { unpack "w", $_[0]->{rbuf} })	1825	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
1108	or return;	1826	or return;
1109		1827
		1828	my $format = length pack "w", $len;
		1829
		1830	# bypass unshift if we already have the remaining chunk
		1831	if ($format + $len <= length $_[0]{rbuf}) {
		1832	my $data = substr $_[0]{rbuf}, $format, $len;
		1833	substr $_[0]{rbuf}, 0, $format + $len, "";
		1834
		1835	eval { $cb->($_[0], Storable::thaw ($data)); 1 }
		1836	or return $_[0]->_error (Errno::EBADMSG);
		1837	} else {
1110	# remove prefix	1838	# remove prefix
1111	substr $_[0]->{rbuf}, 0, (length pack "w", $len), "";	1839	substr $_[0]{rbuf}, 0, $format, "";
1112		1840
1113	# read rest	1841	# read remaining chunk
1114	$_[0]->unshift_read (chunk => $len, sub {	1842	$_[0]->unshift_read (chunk => $len, sub {
1115	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1843	eval { $cb->($_[0], Storable::thaw ($_[1])); 1 }
1116	$cb->($_[0], $ref);
1117	} else {
1118	$self->_error (&Errno::EBADMSG);	1844	or $_[0]->_error (Errno::EBADMSG);
1119	}	1845	});
1120	});	1846	}
		1847
		1848	1
1121	}	1849	}
1122	};	1850	};
1123		1851
		1852	=item tls_detect => $cb->($handle, $detect, $major, $minor)
		1853
		1854	Checks the input stream for a valid SSL or TLS handshake TLSPaintext
		1855	record without consuming anything. Only SSL version 3 or higher
		1856	is handled, up to the fictituous protocol 4.x (but both SSL3+ and
		1857	SSL2-compatible framing is supported).
		1858
		1859	If it detects that the input data is likely TLS, it calls the callback
		1860	with a true value for C<$detect> and the (on-wire) TLS version as second
		1861	and third argument (C<$major> is C<3>, and C<$minor> is 0..3 for SSL
		1862	3.0, TLS 1.0, 1.1 and 1.2, respectively). If it detects the input to
		1863	be definitely not TLS, it calls the callback with a false value for
		1864	C<$detect>.
		1865
		1866	The callback could use this information to decide whether or not to start
		1867	TLS negotiation.
		1868
		1869	In all cases the data read so far is passed to the following read
		1870	handlers.
		1871
		1872	Usually you want to use the C<tls_autostart> read type instead.
		1873
		1874	If you want to design a protocol that works in the presence of TLS
		1875	dtection, make sure that any non-TLS data doesn't start with the octet 22
		1876	(ASCII SYN, 16 hex) or 128-255 (i.e. highest bit set). The checks this
		1877	read type does are a bit more strict, but might losen in the future to
		1878	accomodate protocol changes.
		1879
		1880	This read type does not rely on L<AnyEvent::TLS> (and thus, not on
		1881	L<Net::SSLeay>).
		1882
		1883	=item tls_autostart => [$tls_ctx, ]$tls
		1884
		1885	Tries to detect a valid SSL or TLS handshake. If one is detected, it tries
		1886	to start tls by calling C<starttls> with the given arguments.
		1887
		1888	In practise, C<$tls> must be C<accept>, or a Net::SSLeay context that has
		1889	been configured to accept, as servers do not normally send a handshake on
		1890	their own and ths cannot be detected in this way.
		1891
		1892	See C<tls_detect> above for more details.
		1893
		1894	Example: give the client a chance to start TLS before accepting a text
		1895	line.
		1896
		1897	$hdl->push_read (tls_autostart => "accept");
		1898	$hdl->push_read (line => sub {
		1899	print "received ", ($_[0]{tls} ? "encrypted" : "cleartext"), " <$_[1]>\n";
		1900	});
		1901
		1902	=cut
		1903
		1904	register_read_type tls_detect => sub {
		1905	my ($self, $cb) = @_;
		1906
		1907	sub {
		1908	# this regex matches a full or partial tls record
		1909	if (
		1910	# ssl3+: type(22=handshake) major(=3) minor(any) length_hi
		1911	$self->{rbuf} =~ /^(?:\z| \x16 (\z| [\x03\x04] (?:\z| . (?:\z| [\x00-\x40] ))))/xs
		1912	# ssl2 comapatible: len_hi len_lo type(1) major minor dummy(forlength)
		1913	or $self->{rbuf} =~ /^(?:\z| [\x80-\xff] (?:\z| . (?:\z| \x01 (\z| [\x03\x04] (?:\z| . (?:\z| . ))))))/xs
		1914	) {
		1915	return if 3 != length $1; # partial match, can't decide yet
		1916
		1917	# full match, valid TLS record
		1918	my ($major, $minor) = unpack "CC", $1;
		1919	$cb->($self, "accept", $major + $minor * 0.1);
		1920	} else {
		1921	# mismatch == guaranteed not TLS
		1922	$cb->($self, undef);
		1923	}
		1924
		1925	1
		1926	}
		1927	};
		1928
		1929	register_read_type tls_autostart => sub {
		1930	my ($self, @tls) = @_;
		1931
		1932	$RH{tls_detect}($self, sub {
		1933	return unless $_[1];
		1934	$_[0]->starttls (@tls);
		1935	})
		1936	};
		1937
1124	=back	1938	=back
1125		1939
1126	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1940	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1127		1941
1128	This function (not method) lets you add your own types to C<push_read>.	1942	Instead of one of the predefined types, you can also specify the name
		1943	of a package. AnyEvent will try to load the package and then expects to
		1944	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1945	progressively tries to load the parent package until it either finds the
		1946	function (good) or runs out of packages (bad).
1129		1947
1130	Whenever the given C<type> is used, C<push_read> will invoke the code	1948	Whenever this type is used, C<push_read> will invoke the function with the
1131	reference with the handle object, the callback and the remaining	1949	handle object, the original callback and the remaining arguments.
1132	arguments.
1133		1950
1134	The code reference is supposed to return a callback (usually a closure)	1951	The function is supposed to return a callback (usually a closure) that
1135	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1952	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1953	mentally treat the function as a "configurable read type to read callback"
		1954	converter.
1136		1955
1137	It should invoke the passed callback when it is done reading (remember to	1956	It should invoke the original callback when it is done reading (remember
1138	pass C<$handle> as first argument as all other callbacks do that).	1957	to pass C<$handle> as first argument as all other callbacks do that,
		1958	although there is no strict requirement on this).
1139		1959
1140	Note that this is a function, and all types registered this way will be
1141	global, so try to use unique names.
1142
1143	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1960	For examples, see the source of this module (F<perldoc -m
1144	search for C<register_read_type>)).	1961	AnyEvent::Handle>, search for C<register_read_type>)).
1145		1962
1146	=item $handle->stop_read	1963	=item $handle->stop_read
1147		1964
1148	=item $handle->start_read	1965	=item $handle->start_read
1149		1966
…		…
1155	Note that AnyEvent::Handle will automatically C<start_read> for you when	1972	Note that AnyEvent::Handle will automatically C<start_read> for you when
1156	you change the C<on_read> callback or push/unshift a read callback, and it	1973	you change the C<on_read> callback or push/unshift a read callback, and it
1157	will automatically C<stop_read> for you when neither C<on_read> is set nor	1974	will automatically C<stop_read> for you when neither C<on_read> is set nor
1158	there are any read requests in the queue.	1975	there are any read requests in the queue.
1159		1976
		1977	In older versions of this module (<= 5.3), these methods had no effect,
		1978	as TLS does not support half-duplex connections. In current versions they
		1979	work as expected, as this behaviour is required to avoid certain resource
		1980	attacks, where the program would be forced to read (and buffer) arbitrary
		1981	amounts of data before being able to send some data. The drawback is that
		1982	some readings of the the SSL/TLS specifications basically require this
		1983	attack to be working, as SSL/TLS implementations might stall sending data
		1984	during a rehandshake.
		1985
		1986	As a guideline, during the initial handshake, you should not stop reading,
		1987	and as a client, it might cause problems, depending on your application.
		1988
1160	=cut	1989	=cut
1161		1990
1162	sub stop_read {	1991	sub stop_read {
1163	my ($self) = @_;	1992	my ($self) = @_;
1164		1993
…		…
1166	}	1995	}
1167		1996
1168	sub start_read {	1997	sub start_read {
1169	my ($self) = @_;	1998	my ($self) = @_;
1170		1999
1171	unless ($self->{_rw} || $self->{_eof}) {	2000	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1172	Scalar::Util::weaken $self;	2001	Scalar::Util::weaken $self;
1173		2002
1174	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	2003	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1175	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	2004	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1176	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	2005	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1177		2006
1178	if ($len > 0) {	2007	if ($len > 0) {
1179	$self->{_activity} = AnyEvent->now;	2008	$self->{_activity} = $self->{_ractivity} = AE::now;
1180		2009
1181	$self->{filter_r}	2010	if ($self->{tls}) {
1182	? $self->{filter_r}($self, $rbuf)	2011	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1183	: $self->{_in_drain} || $self->_drain_rbuf;	2012
		2013	&_dotls ($self);
		2014	} else {
		2015	$self->_drain_rbuf;
		2016	}
		2017
		2018	if ($len == $self->{read_size}) {
		2019	$self->{read_size} *= 2;
		2020	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		2021	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		2022	}
1184		2023
1185	} elsif (defined $len) {	2024	} elsif (defined $len) {
1186	delete $self->{_rw};	2025	delete $self->{_rw};
1187	$self->{_eof} = 1;	2026	$self->{_eof} = 1;
1188	$self->_drain_rbuf unless $self->{_in_drain};	2027	$self->_drain_rbuf;
1189		2028
1190	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	2029	} elsif ($! != EAGAIN && $! != EINTR && $! != EWOULDBLOCK && $! != WSAEWOULDBLOCK) {
1191	return $self->_error ($!, 1);	2030	return $self->_error ($!, 1);
1192	}	2031	}
1193	});	2032	};
1194	}	2033	}
1195	}	2034	}
1196		2035
		2036	our $ERROR_SYSCALL;
		2037	our $ERROR_WANT_READ;
		2038
		2039	sub _tls_error {
		2040	my ($self, $err) = @_;
		2041
		2042	return $self->_error ($!, 1)
		2043	if $err == Net::SSLeay::ERROR_SYSCALL ();
		2044
		2045	my $err = Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		2046
		2047	# reduce error string to look less scary
		2048	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		2049
		2050	if ($self->{_on_starttls}) {
		2051	(delete $self->{_on_starttls})->($self, undef, $err);
		2052	&_freetls;
		2053	} else {
		2054	&_freetls;
		2055	$self->_error (Errno::EPROTO, 1, $err);
		2056	}
		2057	}
		2058
		2059	# poll the write BIO and send the data if applicable
		2060	# also decode read data if possible
		2061	# this is basiclaly our TLS state machine
		2062	# more efficient implementations are possible with openssl,
		2063	# but not with the buggy and incomplete Net::SSLeay.
1197	sub _dotls {	2064	sub _dotls {
1198	my ($self) = @_;	2065	my ($self) = @_;
1199		2066
1200	my $buf;	2067	my $tmp;
1201		2068
1202	if (length $self->{_tls_wbuf}) {	2069	while (length $self->{_tls_wbuf}) {
1203	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	2070	if (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) <= 0) {
1204	substr $self->{_tls_wbuf}, 0, $len, "";	2071	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		2072
		2073	return $self->_tls_error ($tmp)
		2074	if $tmp != $ERROR_WANT_READ
		2075	&& ($tmp != $ERROR_SYSCALL || $!);
		2076
		2077	last;
1205	}	2078	}
1206	}
1207		2079
		2080	substr $self->{_tls_wbuf}, 0, $tmp, "";
		2081	}
		2082
		2083	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		2084	unless (length $tmp) {
		2085	$self->{_on_starttls}
		2086	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		2087	&_freetls;
		2088
		2089	if ($self->{on_stoptls}) {
		2090	$self->{on_stoptls}($self);
		2091	return;
		2092	} else {
		2093	# let's treat SSL-eof as we treat normal EOF
		2094	delete $self->{_rw};
		2095	$self->{_eof} = 1;
		2096	}
		2097	}
		2098
		2099	$self->{_tls_rbuf} .= $tmp;
		2100	$self->_drain_rbuf;
		2101	$self->{tls} or return; # tls session might have gone away in callback
		2102	}
		2103
		2104	$tmp = Net::SSLeay::get_error ($self->{tls}, -1); # -1 is not neccessarily correct, but Net::SSLeay doesn't tell us
		2105	return $self->_tls_error ($tmp)
		2106	if $tmp != $ERROR_WANT_READ
		2107	&& ($tmp != $ERROR_SYSCALL || $!);
		2108
1208	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	2109	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1209	$self->{wbuf} .= $buf;	2110	$self->{wbuf} .= $tmp;
1210	$self->_drain_wbuf;	2111	$self->_drain_wbuf;
		2112	$self->{tls} or return; # tls session might have gone away in callback
1211	}	2113	}
1212		2114
1213	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	2115	$self->{_on_starttls}
1214	if (length $buf) {	2116	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1215	$self->{rbuf} .= $buf;	2117	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1216	$self->_drain_rbuf unless $self->{_in_drain};
1217	} else {
1218	# let's treat SSL-eof as we treat normal EOF
1219	$self->{_eof} = 1;
1220	$self->_shutdown;
1221	return;
1222	}
1223	}
1224
1225	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1226
1227	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1228	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1229	return $self->_error ($!, 1);
1230	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1231	return $self->_error (&Errno::EIO, 1);
1232	}
1233
1234	# all others are fine for our purposes
1235	}
1236	}	2118	}
1237		2119
1238	=item $handle->starttls ($tls[, $tls_ctx])	2120	=item $handle->starttls ($tls[, $tls_ctx])
1239		2121
1240	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	2122	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1241	object is created, you can also do that at a later time by calling	2123	object is created, you can also do that at a later time by calling
1242	C<starttls>.	2124	C<starttls>. See the C<tls> constructor argument for general info.
		2125
		2126	Starting TLS is currently an asynchronous operation - when you push some
		2127	write data and then call C<< ->starttls >> then TLS negotiation will start
		2128	immediately, after which the queued write data is then sent. This might
		2129	change in future versions, so best make sure you have no outstanding write
		2130	data when calling this method.
1243		2131
1244	The first argument is the same as the C<tls> constructor argument (either	2132	The first argument is the same as the C<tls> constructor argument (either
1245	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	2133	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1246		2134
1247	The second argument is the optional C<Net::SSLeay::CTX> object that is	2135	The second argument is the optional C<AnyEvent::TLS> object that is used
1248	used when AnyEvent::Handle has to create its own TLS connection object.	2136	when AnyEvent::Handle has to create its own TLS connection object, or
		2137	a hash reference with C<< key => value >> pairs that will be used to
		2138	construct a new context.
1249		2139
1250	The TLS connection object will end up in C<< $handle->{tls} >> after this	2140	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1251	call and can be used or changed to your liking. Note that the handshake	2141	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1252	might have already started when this function returns.	2142	changed to your liking. Note that the handshake might have already started
		2143	when this function returns.
1253		2144
		2145	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		2146	handshakes on the same stream. It is best to not attempt to use the
		2147	stream after stopping TLS.
		2148
		2149	This method may invoke callbacks (and therefore the handle might be
		2150	destroyed after it returns).
		2151
1254	=cut	2152	=cut
		2153
		2154	our %TLS_CACHE; #TODO not yet documented, should we?
1255		2155
1256	sub starttls {	2156	sub starttls {
1257	my ($self, $ssl, $ctx) = @_;	2157	my ($self, $tls, $ctx) = @_;
1258		2158
1259	$self->stoptls;	2159	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		2160	if $self->{tls};
1260		2161
1261	if ($ssl eq "accept") {	2162	unless (defined $AnyEvent::TLS::VERSION) {
1262	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	2163	eval {
1263	Net::SSLeay::set_accept_state ($ssl);	2164	require Net::SSLeay;
1264	} elsif ($ssl eq "connect") {	2165	require AnyEvent::TLS;
1265	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	2166	1
1266	Net::SSLeay::set_connect_state ($ssl);	2167	} or return $self->_error (Errno::EPROTO, 1, "TLS support not available on this system");
		2168	}
		2169
		2170	$self->{tls} = $tls;
		2171	$self->{tls_ctx} = $ctx if @_ > 2;
		2172
		2173	return unless $self->{fh};
		2174
		2175	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		2176	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		2177
		2178	$tls = delete $self->{tls};
		2179	$ctx = $self->{tls_ctx};
		2180
		2181	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		2182
		2183	if ("HASH" eq ref $ctx) {
		2184	if ($ctx->{cache}) {
		2185	my $key = $ctx+0;
		2186	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		2187	} else {
		2188	$ctx = new AnyEvent::TLS %$ctx;
		2189	}
		2190	}
1267	}	2191
1268		2192	$self->{tls_ctx} = $ctx || TLS_CTX ();
1269	$self->{tls} = $ssl;	2193	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1270		2194
1271	# basically, this is deep magic (because SSL_read should have the same issues)	2195	# basically, this is deep magic (because SSL_read should have the same issues)
1272	# but the openssl maintainers basically said: "trust us, it just works".	2196	# but the openssl maintainers basically said: "trust us, it just works".
1273	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	2197	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1274	# and mismaintained ssleay-module doesn't even offer them).	2198	# and mismaintained ssleay-module didn't offer them for a decade or so).
1275	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	2199	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		2200	#
		2201	# in short: this is a mess.
		2202	#
		2203	# note that we do not try to keep the length constant between writes as we are required to do.
		2204	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		2205	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		2206	# have identity issues in that area.
1276	Net::SSLeay::CTX_set_mode ($self->{tls},	2207	# Net::SSLeay::set_mode ($ssl,
1277	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	2208	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1278	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	2209	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		2210	Net::SSLeay::set_mode ($tls, 1|2);
1279		2211
1280	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2212	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1281	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2213	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1282		2214
		2215	Net::SSLeay::BIO_write ($self->{_rbio}, $self->{rbuf});
		2216	$self->{rbuf} = "";
		2217
1283	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	2218	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1284		2219
1285	$self->{filter_w} = sub {	2220	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1286	$_[0]{_tls_wbuf} .= ${$_[1]};	2221	if $self->{on_starttls};
1287	&_dotls;	2222
1288	};	2223	&_dotls; # need to trigger the initial handshake
1289	$self->{filter_r} = sub {	2224	$self->start_read; # make sure we actually do read
1290	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1291	&_dotls;
1292	};
1293	}	2225	}
1294		2226
1295	=item $handle->stoptls	2227	=item $handle->stoptls
1296		2228
1297	Destroys the SSL connection, if any. Partial read or write data will be	2229	Shuts down the SSL connection - this makes a proper EOF handshake by
1298	lost.	2230	sending a close notify to the other side, but since OpenSSL doesn't
		2231	support non-blocking shut downs, it is not guaranteed that you can re-use
		2232	the stream afterwards.
		2233
		2234	This method may invoke callbacks (and therefore the handle might be
		2235	destroyed after it returns).
1299		2236
1300	=cut	2237	=cut
1301		2238
1302	sub stoptls {	2239	sub stoptls {
1303	my ($self) = @_;	2240	my ($self) = @_;
1304		2241
1305	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	2242	if ($self->{tls} && $self->{fh}) {
		2243	Net::SSLeay::shutdown ($self->{tls});
1306		2244
1307	delete $self->{_rbio};	2245	&_dotls;
1308	delete $self->{_wbio};	2246
1309	delete $self->{_tls_wbuf};	2247	# # we don't give a shit. no, we do, but we can't. no...#d#
1310	delete $self->{filter_r};	2248	# # we, we... have to use openssl :/#d#
1311	delete $self->{filter_w};	2249	# &_freetls;#d#
		2250	}
1312	}	2251	}
		2252
		2253	sub _freetls {
		2254	my ($self) = @_;
		2255
		2256	return unless $self->{tls};
		2257
		2258	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2259	if $self->{tls} > 0;
		2260
		2261	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
		2262	}
		2263
		2264	=item $handle->resettls
		2265
		2266	This rarely-used method simply resets and TLS state on the handle, usually
		2267	causing data loss.
		2268
		2269	One case where it may be useful is when you want to skip over the data in
		2270	the stream but you are not interested in interpreting it, so data loss is
		2271	no concern.
		2272
		2273	=cut
		2274
		2275	*resettls = \&_freetls;
1313		2276
1314	sub DESTROY {	2277	sub DESTROY {
1315	my $self = shift;	2278	my ($self) = @_;
1316		2279
1317	$self->stoptls;	2280	&_freetls;
1318		2281
1319	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2282	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1320		2283
1321	if ($linger && length $self->{wbuf}) {	2284	if ($linger && length $self->{wbuf} && $self->{fh}) {
1322	my $fh = delete $self->{fh};	2285	my $fh = delete $self->{fh};
1323	my $wbuf = delete $self->{wbuf};	2286	my $wbuf = delete $self->{wbuf};
1324		2287
1325	my @linger;	2288	my @linger;
1326		2289
1327	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2290	push @linger, AE::io $fh, 1, sub {
1328	my $len = syswrite $fh, $wbuf, length $wbuf;	2291	my $len = syswrite $fh, $wbuf, length $wbuf;
1329		2292
1330	if ($len > 0) {	2293	if ($len > 0) {
1331	substr $wbuf, 0, $len, "";	2294	substr $wbuf, 0, $len, "";
1332	} else {	2295	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != EWOULDBLOCK && $! != WSAEWOULDBLOCK)) {
1333	@linger = (); # end	2296	@linger = (); # end
1334	}	2297	}
		2298	};
		2299	push @linger, AE::timer $linger, 0, sub {
		2300	@linger = ();
		2301	};
		2302	}
		2303	}
		2304
		2305	=item $handle->destroy
		2306
		2307	Shuts down the handle object as much as possible - this call ensures that
		2308	no further callbacks will be invoked and as many resources as possible
		2309	will be freed. Any method you will call on the handle object after
		2310	destroying it in this way will be silently ignored (and it will return the
		2311	empty list).
		2312
		2313	Normally, you can just "forget" any references to an AnyEvent::Handle
		2314	object and it will simply shut down. This works in fatal error and EOF
		2315	callbacks, as well as code outside. It does I<NOT> work in a read or write
		2316	callback, so when you want to destroy the AnyEvent::Handle object from
		2317	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		2318	that case.
		2319
		2320	Destroying the handle object in this way has the advantage that callbacks
		2321	will be removed as well, so if those are the only reference holders (as
		2322	is common), then one doesn't need to do anything special to break any
		2323	reference cycles.
		2324
		2325	The handle might still linger in the background and write out remaining
		2326	data, as specified by the C<linger> option, however.
		2327
		2328	=cut
		2329
		2330	sub destroy {
		2331	my ($self) = @_;
		2332
		2333	$self->DESTROY;
		2334	%$self = ();
		2335	bless $self, "AnyEvent::Handle::destroyed";
		2336	}
		2337
		2338	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2339	#nop
		2340	}
		2341
		2342	=item $handle->destroyed
		2343
		2344	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2345	->destroy >>, true otherwise.
		2346
		2347	Can be useful to decide whether the handle is still valid after some
		2348	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2349	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2350	can destroy the handle, so work can be avoided by checking sometimes:
		2351
		2352	$hdl->starttls ("accept");
		2353	return if $hdl->destroyed;
		2354	$hdl->push_write (...
		2355
		2356	Note that the call to C<push_write> will silently be ignored if the handle
		2357	has been destroyed, so often you can just ignore the possibility of the
		2358	handle being destroyed.
		2359
		2360	=cut
		2361
		2362	sub destroyed { 0 }
		2363	sub AnyEvent::Handle::destroyed::destroyed { 1 }
		2364
		2365	=item AnyEvent::Handle::TLS_CTX
		2366
		2367	This function creates and returns the AnyEvent::TLS object used by default
		2368	for TLS mode.
		2369
		2370	The context is created by calling L<AnyEvent::TLS> without any arguments.
		2371
		2372	=cut
		2373
		2374	our $TLS_CTX;
		2375
		2376	sub TLS_CTX() {
		2377	$TLS_CTX ||= do {
		2378	require AnyEvent::TLS;
		2379
		2380	new AnyEvent::TLS
		2381	}
		2382	}
		2383
		2384	=back
		2385
		2386
		2387	=head1 NONFREQUENTLY ASKED QUESTIONS
		2388
		2389	=over 4
		2390
		2391	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2392	still get further invocations!
		2393
		2394	That's because AnyEvent::Handle keeps a reference to itself when handling
		2395	read or write callbacks.
		2396
		2397	It is only safe to "forget" the reference inside EOF or error callbacks,
		2398	from within all other callbacks, you need to explicitly call the C<<
		2399	->destroy >> method.
		2400
		2401	=item Why is my C<on_eof> callback never called?
		2402
		2403	Probably because your C<on_error> callback is being called instead: When
		2404	you have outstanding requests in your read queue, then an EOF is
		2405	considered an error as you clearly expected some data.
		2406
		2407	To avoid this, make sure you have an empty read queue whenever your handle
		2408	is supposed to be "idle" (i.e. connection closes are O.K.). You can set
		2409	an C<on_read> handler that simply pushes the first read requests in the
		2410	queue.
		2411
		2412	See also the next question, which explains this in a bit more detail.
		2413
		2414	=item How can I serve requests in a loop?
		2415
		2416	Most protocols consist of some setup phase (authentication for example)
		2417	followed by a request handling phase, where the server waits for requests
		2418	and handles them, in a loop.
		2419
		2420	There are two important variants: The first (traditional, better) variant
		2421	handles requests until the server gets some QUIT command, causing it to
		2422	close the connection first (highly desirable for a busy TCP server). A
		2423	client dropping the connection is an error, which means this variant can
		2424	detect an unexpected detection close.
		2425
		2426	To handle this case, always make sure you have a non-empty read queue, by
		2427	pushing the "read request start" handler on it:
		2428
		2429	# we assume a request starts with a single line
		2430	my @start_request; @start_request = (line => sub {
		2431	my ($hdl, $line) = @_;
		2432
		2433	... handle request
		2434
		2435	# push next request read, possibly from a nested callback
		2436	$hdl->push_read (@start_request);
		2437	});
		2438
		2439	# auth done, now go into request handling loop
		2440	# now push the first @start_request
		2441	$hdl->push_read (@start_request);
		2442
		2443	By always having an outstanding C<push_read>, the handle always expects
		2444	some data and raises the C<EPIPE> error when the connction is dropped
		2445	unexpectedly.
		2446
		2447	The second variant is a protocol where the client can drop the connection
		2448	at any time. For TCP, this means that the server machine may run out of
		2449	sockets easier, and in general, it means you cannot distinguish a protocl
		2450	failure/client crash from a normal connection close. Nevertheless, these
		2451	kinds of protocols are common (and sometimes even the best solution to the
		2452	problem).
		2453
		2454	Having an outstanding read request at all times is possible if you ignore
		2455	C<EPIPE> errors, but this doesn't help with when the client drops the
		2456	connection during a request, which would still be an error.
		2457
		2458	A better solution is to push the initial request read in an C<on_read>
		2459	callback. This avoids an error, as when the server doesn't expect data
		2460	(i.e. is idly waiting for the next request, an EOF will not raise an
		2461	error, but simply result in an C<on_eof> callback. It is also a bit slower
		2462	and simpler:
		2463
		2464	# auth done, now go into request handling loop
		2465	$hdl->on_read (sub {
		2466	my ($hdl) = @_;
		2467
		2468	# called each time we receive data but the read queue is empty
		2469	# simply start read the request
		2470
		2471	$hdl->push_read (line => sub {
		2472	my ($hdl, $line) = @_;
		2473
		2474	... handle request
		2475
		2476	# do nothing special when the request has been handled, just
		2477	# let the request queue go empty.
1335	});	2478	});
1336	push @linger, AnyEvent->timer (after => $linger, cb => sub {
1337	@linger = ();
1338	});	2479	});
		2480
		2481	=item I get different callback invocations in TLS mode/Why can't I pause
		2482	reading?
		2483
		2484	Unlike, say, TCP, TLS connections do not consist of two independent
		2485	communication channels, one for each direction. Or put differently, the
		2486	read and write directions are not independent of each other: you cannot
		2487	write data unless you are also prepared to read, and vice versa.
		2488
		2489	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
		2490	callback invocations when you are not expecting any read data - the reason
		2491	is that AnyEvent::Handle always reads in TLS mode.
		2492
		2493	During the connection, you have to make sure that you always have a
		2494	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2495	connection (or when you no longer want to use it) you can call the
		2496	C<destroy> method.
		2497
		2498	=item How do I read data until the other side closes the connection?
		2499
		2500	If you just want to read your data into a perl scalar, the easiest way
		2501	to achieve this is by setting an C<on_read> callback that does nothing,
		2502	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2503	will be in C<$_[0]{rbuf}>:
		2504
		2505	$handle->on_read (sub { });
		2506	$handle->on_eof (undef);
		2507	$handle->on_error (sub {
		2508	my $data = delete $_[0]{rbuf};
		2509	});
		2510
		2511	Note that this example removes the C<rbuf> member from the handle object,
		2512	which is not normally allowed by the API. It is expressly permitted in
		2513	this case only, as the handle object needs to be destroyed afterwards.
		2514
		2515	The reason to use C<on_error> is that TCP connections, due to latencies
		2516	and packets loss, might get closed quite violently with an error, when in
		2517	fact all data has been received.
		2518
		2519	It is usually better to use acknowledgements when transferring data,
		2520	to make sure the other side hasn't just died and you got the data
		2521	intact. This is also one reason why so many internet protocols have an
		2522	explicit QUIT command.
		2523
		2524	=item I don't want to destroy the handle too early - how do I wait until
		2525	all data has been written?
		2526
		2527	After writing your last bits of data, set the C<on_drain> callback
		2528	and destroy the handle in there - with the default setting of
		2529	C<low_water_mark> this will be called precisely when all data has been
		2530	written to the socket:
		2531
		2532	$handle->push_write (...);
		2533	$handle->on_drain (sub {
		2534	AE::log debug => "All data submitted to the kernel.";
		2535	undef $handle;
		2536	});
		2537
		2538	If you just want to queue some data and then signal EOF to the other side,
		2539	consider using C<< ->push_shutdown >> instead.
		2540
		2541	=item I want to contact a TLS/SSL server, I don't care about security.
		2542
		2543	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2544	connect to it and then create the AnyEvent::Handle with the C<tls>
		2545	parameter:
		2546
		2547	tcp_connect $host, $port, sub {
		2548	my ($fh) = @_;
		2549
		2550	my $handle = new AnyEvent::Handle
		2551	fh => $fh,
		2552	tls => "connect",
		2553	on_error => sub { ... };
		2554
		2555	$handle->push_write (...);
1339	}	2556	};
1340	}
1341		2557
1342	=item AnyEvent::Handle::TLS_CTX	2558	=item I want to contact a TLS/SSL server, I do care about security.
1343		2559
1344	This function creates and returns the Net::SSLeay::CTX object used by	2560	Then you should additionally enable certificate verification, including
1345	default for TLS mode.	2561	peername verification, if the protocol you use supports it (see
		2562	L<AnyEvent::TLS>, C<verify_peername>).
1346		2563
1347	The context is created like this:	2564	E.g. for HTTPS:
1348		2565
1349	Net::SSLeay::load_error_strings;	2566	tcp_connect $host, $port, sub {
1350	Net::SSLeay::SSLeay_add_ssl_algorithms;	2567	my ($fh) = @_;
1351	Net::SSLeay::randomize;
1352		2568
1353	my $CTX = Net::SSLeay::CTX_new;	2569	my $handle = new AnyEvent::Handle
		2570	fh => $fh,
		2571	peername => $host,
		2572	tls => "connect",
		2573	tls_ctx => { verify => 1, verify_peername => "https" },
		2574	...
1354		2575
1355	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL	2576	Note that you must specify the hostname you connected to (or whatever
		2577	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2578	peername verification will be done.
1356		2579
1357	=cut	2580	The above will use the system-dependent default set of trusted CA
		2581	certificates. If you want to check against a specific CA, add the
		2582	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
1358		2583
1359	our $TLS_CTX;	2584	tls_ctx => {
		2585	verify => 1,
		2586	verify_peername => "https",
		2587	ca_file => "my-ca-cert.pem",
		2588	},
1360		2589
1361	sub TLS_CTX() {	2590	=item I want to create a TLS/SSL server, how do I do that?
1362	$TLS_CTX || do {
1363	require Net::SSLeay;
1364		2591
1365	Net::SSLeay::load_error_strings ();	2592	Well, you first need to get a server certificate and key. You have
1366	Net::SSLeay::SSLeay_add_ssl_algorithms ();	2593	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
1367	Net::SSLeay::randomize ();	2594	self-signed certificate (cheap. check the search engine of your choice,
		2595	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2596	nice program for that purpose).
1368		2597
1369	$TLS_CTX = Net::SSLeay::CTX_new ();	2598	Then create a file with your private key (in PEM format, see
		2599	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2600	file should then look like this:
1370		2601
1371	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());	2602	-----BEGIN RSA PRIVATE KEY-----
		2603	...header data
		2604	... lots of base64'y-stuff
		2605	-----END RSA PRIVATE KEY-----
1372		2606
1373	$TLS_CTX	2607	-----BEGIN CERTIFICATE-----
1374	}	2608	... lots of base64'y-stuff
1375	}	2609	-----END CERTIFICATE-----
		2610
		2611	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2612	specify this file as C<cert_file>:
		2613
		2614	tcp_server undef, $port, sub {
		2615	my ($fh) = @_;
		2616
		2617	my $handle = new AnyEvent::Handle
		2618	fh => $fh,
		2619	tls => "accept",
		2620	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2621	...
		2622
		2623	When you have intermediate CA certificates that your clients might not
		2624	know about, just append them to the C<cert_file>.
1376		2625
1377	=back	2626	=back
1378		2627
1379	=head1 SUBCLASSING AnyEvent::Handle	2628	=head1 SUBCLASSING AnyEvent::Handle
1380		2629
…		…
1386	=over 4	2635	=over 4
1387		2636
1388	=item * all constructor arguments become object members.	2637	=item * all constructor arguments become object members.
1389		2638
1390	At least initially, when you pass a C<tls>-argument to the constructor it	2639	At least initially, when you pass a C<tls>-argument to the constructor it
1391	will end up in C<< $handle->{tls} >>. Those members might be changes or	2640	will end up in C<< $handle->{tls} >>. Those members might be changed or
1392	mutated later on (for example C<tls> will hold the TLS connection object).	2641	mutated later on (for example C<tls> will hold the TLS connection object).
1393		2642
1394	=item * other object member names are prefixed with an C<_>.	2643	=item * other object member names are prefixed with an C<_>.
1395		2644
1396	All object members not explicitly documented (internal use) are prefixed	2645	All object members not explicitly documented (internal use) are prefixed
…		…
1399		2648
1400	=item * all members not documented here and not prefixed with an underscore	2649	=item * all members not documented here and not prefixed with an underscore
1401	are free to use in subclasses.	2650	are free to use in subclasses.
1402		2651
1403	Of course, new versions of AnyEvent::Handle may introduce more "public"	2652	Of course, new versions of AnyEvent::Handle may introduce more "public"
1404	member variables, but thats just life, at least it is documented.	2653	member variables, but that's just life. At least it is documented.
1405		2654
1406	=back	2655	=back
1407		2656
1408	=head1 AUTHOR	2657	=head1 AUTHOR
1409		2658
1410	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	2659	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
1411		2660
1412	=cut	2661	=cut
1413		2662
1414	1; # End of AnyEvent::Handle	2663	1
		2664

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines