[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.24 by root, Sat May 24 15:11:46 2008 UTC vs.
Revision 1.69 by root, Sun Jun 15 21:44:56 2008 UTC

…		…
2		2
3	no warnings;	3	no warnings;
4	use strict;	4	use strict;
5		5
6	use AnyEvent ();	6	use AnyEvent ();
7	use AnyEvent::Util ();	7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();	8	use Scalar::Util ();
9	use Carp ();	9	use Carp ();
10	use Fcntl ();	10	use Fcntl ();
11	use Errno qw/EAGAIN EINTR/;	11	use Errno qw(EAGAIN EINTR);
12		12
13	=head1 NAME	13	=head1 NAME
14		14
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		16
17	This module is experimental.
18
19	=cut	17	=cut
20		18
21	our $VERSION = '0.04';	19	our $VERSION = 4.151;
22		20
23	=head1 SYNOPSIS	21	=head1 SYNOPSIS
24		22
25	use AnyEvent;	23	use AnyEvent;
26	use AnyEvent::Handle;	24	use AnyEvent::Handle;
27		25
28	my $cv = AnyEvent->condvar;	26	my $cv = AnyEvent->condvar;
29		27
30	my $ae_fh = AnyEvent::Handle->new (fh => \*STDIN);	28	my $handle =
31
32	#TODO
33
34	# or use the constructor to pass the callback:
35
36	my $ae_fh2 =
37	AnyEvent::Handle->new (	29	AnyEvent::Handle->new (
38	fh => \*STDIN,	30	fh => \*STDIN,
39	on_eof => sub {	31	on_eof => sub {
40	$cv->broadcast;	32	$cv->broadcast;
41	},	33	},
42	#TODO
43	);	34	);
44		35
45	$cv->wait;	36	# send some request line
		37	$handle->push_write ("getinfo\015\012");
		38
		39	# read the response line
		40	$handle->push_read (line => sub {
		41	my ($handle, $line) = @_;
		42	warn "read line <$line>\n";
		43	$cv->send;
		44	});
		45
		46	$cv->recv;
46		47
47	=head1 DESCRIPTION	48	=head1 DESCRIPTION
48		49
49	This module is a helper module to make it easier to do event-based I/O on	50	This module is a helper module to make it easier to do event-based I/O on
50	filehandles. For utility functions for doing non-blocking connects and accepts	51	filehandles. For utility functions for doing non-blocking connects and accepts
…		…
72	The filehandle this L<AnyEvent::Handle> object will operate on.	73	The filehandle this L<AnyEvent::Handle> object will operate on.
73		74
74	NOTE: The filehandle will be set to non-blocking (using	75	NOTE: The filehandle will be set to non-blocking (using
75	AnyEvent::Util::fh_nonblocking).	76	AnyEvent::Util::fh_nonblocking).
76		77
77	=item on_eof => $cb->($self)	78	=item on_eof => $cb->($handle)
78		79
79	Set the callback to be called on EOF.	80	Set the callback to be called when an end-of-file condition is detcted,
		81	i.e. in the case of a socket, when the other side has closed the
		82	connection cleanly.
80		83
81	While not mandatory, it is highly recommended to set an eof callback,	84	While not mandatory, it is highly recommended to set an eof callback,
82	otherwise you might end up with a closed socket while you are still	85	otherwise you might end up with a closed socket while you are still
83	waiting for data.	86	waiting for data.
84		87
85	=item on_error => $cb->($self)	88	=item on_error => $cb->($handle, $fatal)
86		89
87	This is the fatal error callback, that is called when, well, a fatal error	90	This is the error callback, which is called when, well, some error
88	occurs, such as not being able to resolve the hostname, failure to connect	91	occured, such as not being able to resolve the hostname, failure to
89	or a read error.	92	connect or a read error.
90		93
91	The object will not be in a usable state when this callback has been	94	Some errors are fatal (which is indicated by C<$fatal> being true). On
92	called.	95	fatal errors the handle object will be shut down and will not be
		96	usable. Non-fatal errors can be retried by simply returning, but it is
		97	recommended to simply ignore this parameter and instead abondon the handle
		98	object when this callback is invoked.
93		99
94	On callback entrance, the value of C<$!> contains the operating system	100	On callback entrance, the value of C<$!> contains the operating system
95	error (or C<ENOSPC> or C<EPIPE>).	101	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
96		102
97	While not mandatory, it is I<highly> recommended to set this callback, as	103	While not mandatory, it is I<highly> recommended to set this callback, as
98	you will not be notified of errors otherwise. The default simply calls	104	you will not be notified of errors otherwise. The default simply calls
99	die.	105	C<croak>.
100		106
101	=item on_read => $cb->($self)	107	=item on_read => $cb->($handle)
102		108
103	This sets the default read callback, which is called when data arrives	109	This sets the default read callback, which is called when data arrives
104	and no read request is in the queue.	110	and no read request is in the queue (unlike read queue callbacks, this
		111	callback will only be called when at least one octet of data is in the
		112	read buffer).
105		113
106	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	114	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
107	method or access the C<$self->{rbuf}> member directly.	115	method or access the C<$handle->{rbuf}> member directly.
108		116
109	When an EOF condition is detected then AnyEvent::Handle will first try to	117	When an EOF condition is detected then AnyEvent::Handle will first try to
110	feed all the remaining data to the queued callbacks and C<on_read> before	118	feed all the remaining data to the queued callbacks and C<on_read> before
111	calling the C<on_eof> callback. If no progress can be made, then a fatal	119	calling the C<on_eof> callback. If no progress can be made, then a fatal
112	error will be raised (with C<$!> set to C<EPIPE>).	120	error will be raised (with C<$!> set to C<EPIPE>).
113		121
114	=item on_drain => $cb->()	122	=item on_drain => $cb->($handle)
115		123
116	This sets the callback that is called when the write buffer becomes empty	124	This sets the callback that is called when the write buffer becomes empty
117	(or when the callback is set and the buffer is empty already).	125	(or when the callback is set and the buffer is empty already).
118		126
119	To append to the write buffer, use the C<< ->push_write >> method.	127	To append to the write buffer, use the C<< ->push_write >> method.
		128
		129	This callback is useful when you don't want to put all of your write data
		130	into the queue at once, for example, when you want to write the contents
		131	of some file to the socket you might not want to read the whole file into
		132	memory and push it into the queue, but instead only read more data from
		133	the file when the write queue becomes empty.
		134
		135	=item timeout => $fractional_seconds
		136
		137	If non-zero, then this enables an "inactivity" timeout: whenever this many
		138	seconds pass without a successful read or write on the underlying file
		139	handle, the C<on_timeout> callback will be invoked (and if that one is
		140	missing, an C<ETIMEDOUT> error will be raised).
		141
		142	Note that timeout processing is also active when you currently do not have
		143	any outstanding read or write requests: If you plan to keep the connection
		144	idle then you should disable the timout temporarily or ignore the timeout
		145	in the C<on_timeout> callback.
		146
		147	Zero (the default) disables this timeout.
		148
		149	=item on_timeout => $cb->($handle)
		150
		151	Called whenever the inactivity timeout passes. If you return from this
		152	callback, then the timeout will be reset as if some activity had happened,
		153	so this condition is not fatal in any way.
120		154
121	=item rbuf_max => <bytes>	155	=item rbuf_max => <bytes>
122		156
123	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	157	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
124	when the read buffer ever (strictly) exceeds this size. This is useful to	158	when the read buffer ever (strictly) exceeds this size. This is useful to
…		…
131	isn't finished).	165	isn't finished).
132		166
133	=item read_size => <bytes>	167	=item read_size => <bytes>
134		168
135	The default read block size (the amount of bytes this module will try to read	169	The default read block size (the amount of bytes this module will try to read
136	on each [loop iteration). Default: C<4096>.	170	during each (loop iteration). Default: C<8192>.
137		171
138	=item low_water_mark => <bytes>	172	=item low_water_mark => <bytes>
139		173
140	Sets the amount of bytes (default: C<0>) that make up an "empty" write	174	Sets the amount of bytes (default: C<0>) that make up an "empty" write
141	buffer: If the write reaches this size or gets even samller it is	175	buffer: If the write reaches this size or gets even samller it is
142	considered empty.	176	considered empty.
143		177
		178	=item linger => <seconds>
		179
		180	If non-zero (default: C<3600>), then the destructor of the
		181	AnyEvent::Handle object will check wether there is still outstanding write
		182	data and will install a watcher that will write out this data. No errors
		183	will be reported (this mostly matches how the operating system treats
		184	outstanding data at socket close time).
		185
		186	This will not work for partial TLS data that could not yet been
		187	encoded. This data will be lost.
		188
144	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object	189	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
145		190
146	When this parameter is given, it enables TLS (SSL) mode, that means it	191	When this parameter is given, it enables TLS (SSL) mode, that means it
147	will start making tls handshake and will transparently encrypt/decrypt	192	will start making tls handshake and will transparently encrypt/decrypt
148	data.	193	data.
		194
		195	TLS mode requires Net::SSLeay to be installed (it will be loaded
		196	automatically when you try to create a TLS handle).
149		197
150	For the TLS server side, use C<accept>, and for the TLS client side of a	198	For the TLS server side, use C<accept>, and for the TLS client side of a
151	connection, use C<connect> mode.	199	connection, use C<connect> mode.
152		200
153	You can also provide your own TLS connection object, but you have	201	You can also provide your own TLS connection object, but you have
154	to make sure that you call either C<Net::SSLeay::set_connect_state>	202	to make sure that you call either C<Net::SSLeay::set_connect_state>
155	or C<Net::SSLeay::set_accept_state> on it before you pass it to	203	or C<Net::SSLeay::set_accept_state> on it before you pass it to
156	AnyEvent::Handle.	204	AnyEvent::Handle.
157		205
		206	See the C<starttls> method if you need to start TLs negotiation later.
		207
158	=item tls_ctx => $ssl_ctx	208	=item tls_ctx => $ssl_ctx
159		209
160	Use the given Net::SSLeay::CTX object to create the new TLS connection	210	Use the given Net::SSLeay::CTX object to create the new TLS connection
161	(unless a connection object was specified directly). If this parameter is	211	(unless a connection object was specified directly). If this parameter is
162	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	212	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
163		213
		214	=item json => JSON or JSON::XS object
		215
		216	This is the json coder object used by the C<json> read and write types.
		217
		218	If you don't supply it, then AnyEvent::Handle will create and use a
		219	suitable one, which will write and expect UTF-8 encoded JSON texts.
		220
		221	Note that you are responsible to depend on the JSON module if you want to
		222	use this functionality, as AnyEvent does not have a dependency itself.
		223
		224	=item filter_r => $cb
		225
		226	=item filter_w => $cb
		227
		228	These exist, but are undocumented at this time.
		229
164	=back	230	=back
165		231
166	=cut	232	=cut
167		233
168	sub new {	234	sub new {
…		…
177	if ($self->{tls}) {	243	if ($self->{tls}) {
178	require Net::SSLeay;	244	require Net::SSLeay;
179	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	245	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});
180	}	246	}
181		247
182	$self->on_eof (delete $self->{on_eof} ) if $self->{on_eof};	248	$self->{_activity} = AnyEvent->now;
183	$self->on_error (delete $self->{on_error}) if $self->{on_error};	249	$self->_timeout;
		250
184	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	251	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
185	$self->on_read (delete $self->{on_read} ) if $self->{on_read};
186		252
187	$self->start_read;	253	$self->start_read
		254	if $self->{on_read};
188		255
189	$self	256	$self
190	}	257	}
191		258
192	sub _shutdown {	259	sub _shutdown {
193	my ($self) = @_;	260	my ($self) = @_;
194		261
		262	delete $self->{_tw};
195	delete $self->{rw};	263	delete $self->{_rw};
196	delete $self->{ww};	264	delete $self->{_ww};
197	delete $self->{fh};	265	delete $self->{fh};
198	}
199		266
		267	$self->stoptls;
		268	}
		269
200	sub error {	270	sub _error {
201	my ($self) = @_;	271	my ($self, $errno, $fatal) = @_;
202		272
203	{
204	local $!;
205	$self->_shutdown;	273	$self->_shutdown
206	}	274	if $fatal;
		275
		276	$! = $errno;
207		277
208	if ($self->{on_error}) {	278	if ($self->{on_error}) {
209	$self->{on_error}($self);	279	$self->{on_error}($self, $fatal);
210	} else {	280	} else {
211	die "AnyEvent::Handle uncaught fatal error: $!";	281	Carp::croak "AnyEvent::Handle uncaught error: $!";
212	}	282	}
213	}	283	}
214		284
215	=item $fh = $handle->fh	285	=item $fh = $handle->fh
216		286
217	This method returns the file handle of the L<AnyEvent::Handle> object.	287	This method returns the file handle of the L<AnyEvent::Handle> object.
218		288
219	=cut	289	=cut
220		290
221	sub fh { $_[0]->{fh} }	291	sub fh { $_[0]{fh} }
222		292
223	=item $handle->on_error ($cb)	293	=item $handle->on_error ($cb)
224		294
225	Replace the current C<on_error> callback (see the C<on_error> constructor argument).	295	Replace the current C<on_error> callback (see the C<on_error> constructor argument).
226		296
…		…
236		306
237	=cut	307	=cut
238		308
239	sub on_eof {	309	sub on_eof {
240	$_[0]{on_eof} = $_[1];	310	$_[0]{on_eof} = $_[1];
		311	}
		312
		313	=item $handle->on_timeout ($cb)
		314
		315	Replace the current C<on_timeout> callback, or disables the callback
		316	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
		317	argument.
		318
		319	=cut
		320
		321	sub on_timeout {
		322	$_[0]{on_timeout} = $_[1];
		323	}
		324
		325	#############################################################################
		326
		327	=item $handle->timeout ($seconds)
		328
		329	Configures (or disables) the inactivity timeout.
		330
		331	=cut
		332
		333	sub timeout {
		334	my ($self, $timeout) = @_;
		335
		336	$self->{timeout} = $timeout;
		337	$self->_timeout;
		338	}
		339
		340	# reset the timeout watcher, as neccessary
		341	# also check for time-outs
		342	sub _timeout {
		343	my ($self) = @_;
		344
		345	if ($self->{timeout}) {
		346	my $NOW = AnyEvent->now;
		347
		348	# when would the timeout trigger?
		349	my $after = $self->{_activity} + $self->{timeout} - $NOW;
		350
		351	# now or in the past already?
		352	if ($after <= 0) {
		353	$self->{_activity} = $NOW;
		354
		355	if ($self->{on_timeout}) {
		356	$self->{on_timeout}($self);
		357	} else {
		358	$self->_error (&Errno::ETIMEDOUT);
		359	}
		360
		361	# callback could have changed timeout value, optimise
		362	return unless $self->{timeout};
		363
		364	# calculate new after
		365	$after = $self->{timeout};
		366	}
		367
		368	Scalar::Util::weaken $self;
		369	return unless $self; # ->error could have destroyed $self
		370
		371	$self->{_tw} \|\|= AnyEvent->timer (after => $after, cb => sub {
		372	delete $self->{_tw};
		373	$self->_timeout;
		374	});
		375	} else {
		376	delete $self->{_tw};
		377	}
241	}	378	}
242		379
243	#############################################################################	380	#############################################################################
244		381
245	=back	382	=back
…		…
282	=cut	419	=cut
283		420
284	sub _drain_wbuf {	421	sub _drain_wbuf {
285	my ($self) = @_;	422	my ($self) = @_;
286		423
287	unless ($self->{ww}) {	424	if (!$self->{_ww} && length $self->{wbuf}) {
		425
288	Scalar::Util::weaken $self;	426	Scalar::Util::weaken $self;
		427
289	my $cb = sub {	428	my $cb = sub {
290	my $len = syswrite $self->{fh}, $self->{wbuf};	429	my $len = syswrite $self->{fh}, $self->{wbuf};
291		430
292	if ($len > 0) {	431	if ($len >= 0) {
293	substr $self->{wbuf}, 0, $len, "";	432	substr $self->{wbuf}, 0, $len, "";
		433
		434	$self->{_activity} = AnyEvent->now;
294		435
295	$self->{on_drain}($self)	436	$self->{on_drain}($self)
296	if $self->{low_water_mark} >= length $self->{wbuf}	437	if $self->{low_water_mark} >= length $self->{wbuf}
297	&& $self->{on_drain};	438	&& $self->{on_drain};
298		439
299	delete $self->{ww} unless length $self->{wbuf};	440	delete $self->{_ww} unless length $self->{wbuf};
300	} elsif ($! != EAGAIN && $! != EINTR) {	441	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
301	$self->error;	442	$self->_error ($!, 1);
302	}	443	}
303	};	444	};
304		445
		446	# try to write data immediately
		447	$cb->();
		448
		449	# if still data left in wbuf, we need to poll
305	$self->{ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb);	450	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)
306		451	if length $self->{wbuf};
307	$cb->($self);
308	};	452	};
		453	}
		454
		455	our %WH;
		456
		457	sub register_write_type($$) {
		458	$WH{$_[0]} = $_[1];
309	}	459	}
310		460
311	sub push_write {	461	sub push_write {
312	my $self = shift;	462	my $self = shift;
313		463
		464	if (@_ > 1) {
		465	my $type = shift;
		466
		467	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
		468	->($self, @_);
		469	}
		470
314	if ($self->{filter_w}) {	471	if ($self->{filter_w}) {
315	$self->{filter_w}->($self, \$_[0]);	472	$self->{filter_w}($self, \$_[0]);
316	} else {	473	} else {
317	$self->{wbuf} .= $_[0];	474	$self->{wbuf} .= $_[0];
318	$self->_drain_wbuf;	475	$self->_drain_wbuf;
319	}	476	}
320	}	477	}
321		478
		479	=item $handle->push_write (type => @args)
		480
		481	Instead of formatting your data yourself, you can also let this module do
		482	the job by specifying a type and type-specific arguments.
		483
		484	Predefined types are (if you have ideas for additional types, feel free to
		485	drop by and tell us):
		486
		487	=over 4
		488
		489	=item netstring => $string
		490
		491	Formats the given value as netstring
		492	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).
		493
		494	=cut
		495
		496	register_write_type netstring => sub {
		497	my ($self, $string) = @_;
		498
		499	sprintf "%d:%s,", (length $string), $string
		500	};
		501
		502	=item packstring => $format, $data
		503
		504	An octet string prefixed with an encoded length. The encoding C<$format>
		505	uses the same format as a Perl C<pack> format, but must specify a single
		506	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		507	optional C<!>, C<< < >> or C<< > >> modifier).
		508
		509	=cut
		510
		511	register_write_type packstring => sub {
		512	my ($self, $format, $string) = @_;
		513
		514	pack "$format/a*", $string
		515	};
		516
		517	=item json => $array_or_hashref
		518
		519	Encodes the given hash or array reference into a JSON object. Unless you
		520	provide your own JSON object, this means it will be encoded to JSON text
		521	in UTF-8.
		522
		523	JSON objects (and arrays) are self-delimiting, so you can write JSON at
		524	one end of a handle and read them at the other end without using any
		525	additional framing.
		526
		527	The generated JSON text is guaranteed not to contain any newlines: While
		528	this module doesn't need delimiters after or between JSON texts to be
		529	able to read them, many other languages depend on that.
		530
		531	A simple RPC protocol that interoperates easily with others is to send
		532	JSON arrays (or objects, although arrays are usually the better choice as
		533	they mimic how function argument passing works) and a newline after each
		534	JSON text:
		535
		536	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
		537	$handle->push_write ("\012");
		538
		539	An AnyEvent::Handle receiver would simply use the C<json> read type and
		540	rely on the fact that the newline will be skipped as leading whitespace:
		541
		542	$handle->push_read (json => sub { my $array = $_[1]; ... });
		543
		544	Other languages could read single lines terminated by a newline and pass
		545	this line into their JSON decoder of choice.
		546
		547	=cut
		548
		549	register_write_type json => sub {
		550	my ($self, $ref) = @_;
		551
		552	require JSON;
		553
		554	$self->{json} ? $self->{json}->encode ($ref)
		555	: JSON::encode_json ($ref)
		556	};
		557
		558	=item storable => $reference
		559
		560	Freezes the given reference using L<Storable> and writes it to the
		561	handle. Uses the C<nfreeze> format.
		562
		563	=cut
		564
		565	register_write_type storable => sub {
		566	my ($self, $ref) = @_;
		567
		568	require Storable;
		569
		570	pack "w/a*", Storable::nfreeze ($ref)
		571	};
		572
		573	=back
		574
		575	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
		576
		577	This function (not method) lets you add your own types to C<push_write>.
		578	Whenever the given C<type> is used, C<push_write> will invoke the code
		579	reference with the handle object and the remaining arguments.
		580
		581	The code reference is supposed to return a single octet string that will
		582	be appended to the write buffer.
		583
		584	Note that this is a function, and all types registered this way will be
		585	global, so try to use unique names.
		586
		587	=cut
		588
322	#############################################################################	589	#############################################################################
323		590
324	=back	591	=back
325		592
326	=head2 READ QUEUE	593	=head2 READ QUEUE
…		…
332	ways, the "simple" way, using only C<on_read> and the "complex" way, using	599	ways, the "simple" way, using only C<on_read> and the "complex" way, using
333	a queue.	600	a queue.
334		601
335	In the simple case, you just install an C<on_read> callback and whenever	602	In the simple case, you just install an C<on_read> callback and whenever
336	new data arrives, it will be called. You can then remove some data (if	603	new data arrives, it will be called. You can then remove some data (if
337	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	604	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
338	or not.	605	leave the data there if you want to accumulate more (e.g. when only a
		606	partial message has been received so far).
339		607
340	In the more complex case, you want to queue multiple callbacks. In this	608	In the more complex case, you want to queue multiple callbacks. In this
341	case, AnyEvent::Handle will call the first queued callback each time new	609	case, AnyEvent::Handle will call the first queued callback each time new
342	data arrives and removes it when it has done its job (see C<push_read>,	610	data arrives (also the first time it is queued) and removes it when it has
343	below).	611	done its job (see C<push_read>, below).
344		612
345	This way you can, for example, push three line-reads, followed by reading	613	This way you can, for example, push three line-reads, followed by reading
346	a chunk of data, and AnyEvent::Handle will execute them in order.	614	a chunk of data, and AnyEvent::Handle will execute them in order.
347		615
348	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	616	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
349	the specified number of bytes which give an XML datagram.	617	the specified number of bytes which give an XML datagram.
350		618
351	# in the default state, expect some header bytes	619	# in the default state, expect some header bytes
352	$handle->on_read (sub {	620	$handle->on_read (sub {
353	# some data is here, now queue the length-header-read (4 octets)	621	# some data is here, now queue the length-header-read (4 octets)
354	shift->unshift_read_chunk (4, sub {	622	shift->unshift_read (chunk => 4, sub {
355	# header arrived, decode	623	# header arrived, decode
356	my $len = unpack "N", $_[1];	624	my $len = unpack "N", $_[1];
357		625
358	# now read the payload	626	# now read the payload
359	shift->unshift_read_chunk ($len, sub {	627	shift->unshift_read (chunk => $len, sub {
360	my $xml = $_[1];	628	my $xml = $_[1];
361	# handle xml	629	# handle xml
362	});	630	});
363	});	631	});
364	});	632	});
365		633
366	Example 2: Implement a client for a protocol that replies either with	634	Example 2: Implement a client for a protocol that replies either with "OK"
367	"OK" and another line or "ERROR" for one request, and 64 bytes for the	635	and another line or "ERROR" for the first request that is sent, and 64
368	second request. Due tot he availability of a full queue, we can just	636	bytes for the second request. Due to the availability of a queue, we can
369	pipeline sending both requests and manipulate the queue as necessary in	637	just pipeline sending both requests and manipulate the queue as necessary
370	the callbacks:	638	in the callbacks.
371		639
372	# request one	640	When the first callback is called and sees an "OK" response, it will
		641	C<unshift> another line-read. This line-read will be queued I<before> the
		642	64-byte chunk callback.
		643
		644	# request one, returns either "OK + extra line" or "ERROR"
373	$handle->push_write ("request 1\015\012");	645	$handle->push_write ("request 1\015\012");
374		646
375	# we expect "ERROR" or "OK" as response, so push a line read	647	# we expect "ERROR" or "OK" as response, so push a line read
376	$handle->push_read_line (sub {	648	$handle->push_read (line => sub {
377	# if we got an "OK", we have to _prepend_ another line,	649	# if we got an "OK", we have to _prepend_ another line,
378	# so it will be read before the second request reads its 64 bytes	650	# so it will be read before the second request reads its 64 bytes
379	# which are already in the queue when this callback is called	651	# which are already in the queue when this callback is called
380	# we don't do this in case we got an error	652	# we don't do this in case we got an error
381	if ($_[1] eq "OK") {	653	if ($_[1] eq "OK") {
382	$_[0]->unshift_read_line (sub {	654	$_[0]->unshift_read (line => sub {
383	my $response = $_[1];	655	my $response = $_[1];
384	...	656	...
385	});	657	});
386	}	658	}
387	});	659	});
388		660
389	# request two	661	# request two, simply returns 64 octets
390	$handle->push_write ("request 2\015\012");	662	$handle->push_write ("request 2\015\012");
391		663
392	# simply read 64 bytes, always	664	# simply read 64 bytes, always
393	$handle->push_read_chunk (64, sub {	665	$handle->push_read (chunk => 64, sub {
394	my $response = $_[1];	666	my $response = $_[1];
395	...	667	...
396	});	668	});
397		669
398	=over 4	670	=over 4
399		671
400	=cut	672	=cut
401		673
402	sub _drain_rbuf {	674	sub _drain_rbuf {
403	my ($self) = @_;	675	my ($self) = @_;
		676
		677	local $self->{_in_drain} = 1;
404		678
405	if (	679	if (
406	defined $self->{rbuf_max}	680	defined $self->{rbuf_max}
407	&& $self->{rbuf_max} < length $self->{rbuf}	681	&& $self->{rbuf_max} < length $self->{rbuf}
408	) {	682	) {
409	$! = &Errno::ENOSPC; return $self->error;	683	return $self->_error (&Errno::ENOSPC, 1);
410	}	684	}
411		685
412	return if $self->{in_drain};	686	while () {
413	local $self->{in_drain} = 1;
414
415	while (my $len = length $self->{rbuf}) {
416	no strict 'refs';	687	no strict 'refs';
		688
		689	my $len = length $self->{rbuf};
		690
417	if (my $cb = shift @{ $self->{queue} }) {	691	if (my $cb = shift @{ $self->{_queue} }) {
418	if (!$cb->($self)) {	692	unless ($cb->($self)) {
419	if ($self->{eof}) {	693	if ($self->{_eof}) {
420	# no progress can be made (not enough data and no data forthcoming)	694	# no progress can be made (not enough data and no data forthcoming)
421	$! = &Errno::EPIPE; return $self->error;	695	$self->_error (&Errno::EPIPE, 1), last;
422	}	696	}
423		697
424	unshift @{ $self->{queue} }, $cb;	698	unshift @{ $self->{_queue} }, $cb;
425	return;	699	last;
426	}	700	}
427	} elsif ($self->{on_read}) {	701	} elsif ($self->{on_read}) {
		702	last unless $len;
		703
428	$self->{on_read}($self);	704	$self->{on_read}($self);
429		705
430	if (	706	if (
431	$self->{eof} # if no further data will arrive
432	&& $len == length $self->{rbuf} # and no data has been consumed	707	$len == length $self->{rbuf} # if no data has been consumed
433	&& !@{ $self->{queue} } # and the queue is still empty	708	&& !@{ $self->{_queue} } # and the queue is still empty
434	&& $self->{on_read} # and we still want to read data	709	&& $self->{on_read} # but we still have on_read
435	) {	710	) {
		711	# no further data will arrive
436	# then no progress can be made	712	# so no progress can be made
437	$! = &Errno::EPIPE; return $self->error;	713	$self->_error (&Errno::EPIPE, 1), last
		714	if $self->{_eof};
		715
		716	last; # more data might arrive
438	}	717	}
439	} else {	718	} else {
440	# read side becomes idle	719	# read side becomes idle
441	delete $self->{rw};	720	delete $self->{_rw};
442	return;	721	last;
443	}	722	}
444	}	723	}
445		724
446	if ($self->{eof}) {
447	$self->_shutdown;
448	$self->{on_eof}($self)	725	$self->{on_eof}($self)
449	if $self->{on_eof};	726	if $self->{_eof} && $self->{on_eof};
		727
		728	# may need to restart read watcher
		729	unless ($self->{_rw}) {
		730	$self->start_read
		731	if $self->{on_read} \|\| @{ $self->{_queue} };
450	}	732	}
451	}	733	}
452		734
453	=item $handle->on_read ($cb)	735	=item $handle->on_read ($cb)
454		736
…		…
460		742
461	sub on_read {	743	sub on_read {
462	my ($self, $cb) = @_;	744	my ($self, $cb) = @_;
463		745
464	$self->{on_read} = $cb;	746	$self->{on_read} = $cb;
		747	$self->_drain_rbuf if $cb && !$self->{_in_drain};
465	}	748	}
466		749
467	=item $handle->rbuf	750	=item $handle->rbuf
468		751
469	Returns the read buffer (as a modifiable lvalue).	752	Returns the read buffer (as a modifiable lvalue).
…		…
500	interested in (which can be none at all) and return a true value. After returning	783	interested in (which can be none at all) and return a true value. After returning
501	true, it will be removed from the queue.	784	true, it will be removed from the queue.
502		785
503	=cut	786	=cut
504		787
		788	our %RH;
		789
		790	sub register_read_type($$) {
		791	$RH{$_[0]} = $_[1];
		792	}
		793
505	sub push_read {	794	sub push_read {
506	my ($self, $cb) = @_;	795	my $self = shift;
		796	my $cb = pop;
507		797
		798	if (@_) {
		799	my $type = shift;
		800
		801	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
		802	->($self, $cb, @_);
		803	}
		804
508	push @{ $self->{queue} }, $cb;	805	push @{ $self->{_queue} }, $cb;
509	$self->_drain_rbuf;	806	$self->_drain_rbuf unless $self->{_in_drain};
510	}	807	}
511		808
512	sub unshift_read {	809	sub unshift_read {
513	my ($self, $cb) = @_;	810	my $self = shift;
		811	my $cb = pop;
514		812
		813	if (@_) {
		814	my $type = shift;
		815
		816	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
		817	->($self, $cb, @_);
		818	}
		819
		820
515	push @{ $self->{queue} }, $cb;	821	unshift @{ $self->{_queue} }, $cb;
516	$self->_drain_rbuf;	822	$self->_drain_rbuf unless $self->{_in_drain};
517	}	823	}
518		824
519	=item $handle->push_read_chunk ($len, $cb->($self, $data))	825	=item $handle->push_read (type => @args, $cb)
520		826
521	=item $handle->unshift_read_chunk ($len, $cb->($self, $data))	827	=item $handle->unshift_read (type => @args, $cb)
522		828
523	Append the given callback to the end of the queue (C<push_read_chunk>) or	829	Instead of providing a callback that parses the data itself you can chose
524	prepend it (C<unshift_read_chunk>).	830	between a number of predefined parsing formats, for chunks of data, lines
		831	etc.
525		832
526	The callback will be called only once C<$len> bytes have been read, and	833	Predefined types are (if you have ideas for additional types, feel free to
527	these C<$len> bytes will be passed to the callback.	834	drop by and tell us):
528		835
529	=cut	836	=over 4
530		837
531	sub _read_chunk($$) {	838	=item chunk => $octets, $cb->($handle, $data)
		839
		840	Invoke the callback only once C<$octets> bytes have been read. Pass the
		841	data read to the callback. The callback will never be called with less
		842	data.
		843
		844	Example: read 2 bytes.
		845
		846	$handle->push_read (chunk => 2, sub {
		847	warn "yay ", unpack "H*", $_[1];
		848	});
		849
		850	=cut
		851
		852	register_read_type chunk => sub {
532	my ($self, $len, $cb) = @_;	853	my ($self, $cb, $len) = @_;
533		854
534	sub {	855	sub {
535	$len <= length $_[0]{rbuf} or return;	856	$len <= length $_[0]{rbuf} or return;
536	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	857	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
537	1	858	1
538	}	859	}
539	}	860	};
540		861
		862	# compatibility with older API
541	sub push_read_chunk {	863	sub push_read_chunk {
542	$_[0]->push_read (&_read_chunk);	864	$_[0]->push_read (chunk => $_[1], $_[2]);
543	}	865	}
544
545		866
546	sub unshift_read_chunk {	867	sub unshift_read_chunk {
547	$_[0]->unshift_read (&_read_chunk);	868	$_[0]->unshift_read (chunk => $_[1], $_[2]);
548	}	869	}
549		870
550	=item $handle->push_read_line ([$eol, ]$cb->($self, $line, $eol))	871	=item line => [$eol, ]$cb->($handle, $line, $eol)
551
552	=item $handle->unshift_read_line ([$eol, ]$cb->($self, $line, $eol))
553
554	Append the given callback to the end of the queue (C<push_read_line>) or
555	prepend it (C<unshift_read_line>).
556		872
557	The callback will be called only once a full line (including the end of	873	The callback will be called only once a full line (including the end of
558	line marker, C<$eol>) has been read. This line (excluding the end of line	874	line marker, C<$eol>) has been read. This line (excluding the end of line
559	marker) will be passed to the callback as second argument (C<$line>), and	875	marker) will be passed to the callback as second argument (C<$line>), and
560	the end of line marker as the third argument (C<$eol>).	876	the end of line marker as the third argument (C<$eol>).
…		…
571	Partial lines at the end of the stream will never be returned, as they are	887	Partial lines at the end of the stream will never be returned, as they are
572	not marked by the end of line marker.	888	not marked by the end of line marker.
573		889
574	=cut	890	=cut
575		891
576	sub _read_line($$) {	892	register_read_type line => sub {
577	my $self = shift;	893	my ($self, $cb, $eol) = @_;
578	my $cb = pop;
579	my $eol = @_ ? shift : qr\|(\015?\012)\|;
580	my $pos;
581		894
		895	$eol = qr\|(\015?\012)\| if @_ < 3;
582	$eol = quotemeta $eol unless ref $eol;	896	$eol = quotemeta $eol unless ref $eol;
583	$eol = qr\|^(.*?)($eol)\|s;	897	$eol = qr\|^(.*?)($eol)\|s;
584		898
585	sub {	899	sub {
586	$_[0]{rbuf} =~ s/$eol// or return;	900	$_[0]{rbuf} =~ s/$eol// or return;
587		901
588	$cb->($_[0], $1, $2);	902	$cb->($_[0], $1, $2);
589	1	903	1
590	}	904	}
591	}	905	};
592		906
		907	# compatibility with older API
593	sub push_read_line {	908	sub push_read_line {
594	$_[0]->push_read (&_read_line);	909	my $self = shift;
		910	$self->push_read (line => @_);
595	}	911	}
596		912
597	sub unshift_read_line {	913	sub unshift_read_line {
598	$_[0]->unshift_read (&_read_line);	914	my $self = shift;
		915	$self->unshift_read (line => @_);
599	}	916	}
		917
		918	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
		919
		920	Makes a regex match against the regex object C<$accept> and returns
		921	everything up to and including the match.
		922
		923	Example: read a single line terminated by '\n'.
		924
		925	$handle->push_read (regex => qr<\n>, sub { ... });
		926
		927	If C<$reject> is given and not undef, then it determines when the data is
		928	to be rejected: it is matched against the data when the C<$accept> regex
		929	does not match and generates an C<EBADMSG> error when it matches. This is
		930	useful to quickly reject wrong data (to avoid waiting for a timeout or a
		931	receive buffer overflow).
		932
		933	Example: expect a single decimal number followed by whitespace, reject
		934	anything else (not the use of an anchor).
		935
		936	$handle->push_read (regex => qr<^[0-9]+\s>, qr<[^0-9]>, sub { ... });
		937
		938	If C<$skip> is given and not C<undef>, then it will be matched against
		939	the receive buffer when neither C<$accept> nor C<$reject> match,
		940	and everything preceding and including the match will be accepted
		941	unconditionally. This is useful to skip large amounts of data that you
		942	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
		943	have to start matching from the beginning. This is purely an optimisation
		944	and is usually worth only when you expect more than a few kilobytes.
		945
		946	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
		947	expect the header to be very large (it isn't in practise, but...), we use
		948	a skip regex to skip initial portions. The skip regex is tricky in that
		949	it only accepts something not ending in either \015 or \012, as these are
		950	required for the accept regex.
		951
		952	$handle->push_read (regex =>
		953	qr<\015\012\015\012>,
		954	undef, # no reject
		955	qr<^.*[^\015\012]>,
		956	sub { ... });
		957
		958	=cut
		959
		960	register_read_type regex => sub {
		961	my ($self, $cb, $accept, $reject, $skip) = @_;
		962
		963	my $data;
		964	my $rbuf = \$self->{rbuf};
		965
		966	sub {
		967	# accept
		968	if ($$rbuf =~ $accept) {
		969	$data .= substr $$rbuf, 0, $+[0], "";
		970	$cb->($self, $data);
		971	return 1;
		972	}
		973
		974	# reject
		975	if ($reject && $$rbuf =~ $reject) {
		976	$self->_error (&Errno::EBADMSG);
		977	}
		978
		979	# skip
		980	if ($skip && $$rbuf =~ $skip) {
		981	$data .= substr $$rbuf, 0, $+[0], "";
		982	}
		983
		984	()
		985	}
		986	};
		987
		988	=item netstring => $cb->($handle, $string)
		989
		990	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
		991
		992	Throws an error with C<$!> set to EBADMSG on format violations.
		993
		994	=cut
		995
		996	register_read_type netstring => sub {
		997	my ($self, $cb) = @_;
		998
		999	sub {
		1000	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
		1001	if ($_[0]{rbuf} =~ /[^0-9]/) {
		1002	$self->_error (&Errno::EBADMSG);
		1003	}
		1004	return;
		1005	}
		1006
		1007	my $len = $1;
		1008
		1009	$self->unshift_read (chunk => $len, sub {
		1010	my $string = $_[1];
		1011	$_[0]->unshift_read (chunk => 1, sub {
		1012	if ($_[1] eq ",") {
		1013	$cb->($_[0], $string);
		1014	} else {
		1015	$self->_error (&Errno::EBADMSG);
		1016	}
		1017	});
		1018	});
		1019
		1020	1
		1021	}
		1022	};
		1023
		1024	=item packstring => $format, $cb->($handle, $string)
		1025
		1026	An octet string prefixed with an encoded length. The encoding C<$format>
		1027	uses the same format as a Perl C<pack> format, but must specify a single
		1028	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1029	optional C<!>, C<< < >> or C<< > >> modifier).
		1030
		1031	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.
		1032
		1033	Example: read a block of data prefixed by its length in BER-encoded
		1034	format (very efficient).
		1035
		1036	$handle->push_read (packstring => "w", sub {
		1037	my ($handle, $data) = @_;
		1038	});
		1039
		1040	=cut
		1041
		1042	register_read_type packstring => sub {
		1043	my ($self, $cb, $format) = @_;
		1044
		1045	sub {
		1046	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1047	defined (my $len = eval { unpack $format, $_[0]->{rbuf} })
		1048	or return;
		1049
		1050	# remove prefix
		1051	substr $_[0]->{rbuf}, 0, (length pack $format, $len), "";
		1052
		1053	# read rest
		1054	$_[0]->unshift_read (chunk => $len, $cb);
		1055
		1056	1
		1057	}
		1058	};
		1059
		1060	=item json => $cb->($handle, $hash_or_arrayref)
		1061
		1062	Reads a JSON object or array, decodes it and passes it to the callback.
		1063
		1064	If a C<json> object was passed to the constructor, then that will be used
		1065	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
		1066
		1067	This read type uses the incremental parser available with JSON version
		1068	2.09 (and JSON::XS version 2.2) and above. You have to provide a
		1069	dependency on your own: this module will load the JSON module, but
		1070	AnyEvent does not depend on it itself.
		1071
		1072	Since JSON texts are fully self-delimiting, the C<json> read and write
		1073	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
		1074	the C<json> write type description, above, for an actual example.
		1075
		1076	=cut
		1077
		1078	register_read_type json => sub {
		1079	my ($self, $cb) = @_;
		1080
		1081	require JSON;
		1082
		1083	my $data;
		1084	my $rbuf = \$self->{rbuf};
		1085
		1086	my $json = $self->{json} \|\|= JSON->new->utf8;
		1087
		1088	sub {
		1089	my $ref = $json->incr_parse ($self->{rbuf});
		1090
		1091	if ($ref) {
		1092	$self->{rbuf} = $json->incr_text;
		1093	$json->incr_text = "";
		1094	$cb->($self, $ref);
		1095
		1096	1
		1097	} else {
		1098	$self->{rbuf} = "";
		1099	()
		1100	}
		1101	}
		1102	};
		1103
		1104	=item storable => $cb->($handle, $ref)
		1105
		1106	Deserialises a L<Storable> frozen representation as written by the
		1107	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1108	data).
		1109
		1110	Raises C<EBADMSG> error if the data could not be decoded.
		1111
		1112	=cut
		1113
		1114	register_read_type storable => sub {
		1115	my ($self, $cb) = @_;
		1116
		1117	require Storable;
		1118
		1119	sub {
		1120	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1121	defined (my $len = eval { unpack "w", $_[0]->{rbuf} })
		1122	or return;
		1123
		1124	# remove prefix
		1125	substr $_[0]->{rbuf}, 0, (length pack "w", $len), "";
		1126
		1127	# read rest
		1128	$_[0]->unshift_read (chunk => $len, sub {
		1129	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1130	$cb->($_[0], $ref);
		1131	} else {
		1132	$self->_error (&Errno::EBADMSG);
		1133	}
		1134	});
		1135	}
		1136	};
		1137
		1138	=back
		1139
		1140	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)
		1141
		1142	This function (not method) lets you add your own types to C<push_read>.
		1143
		1144	Whenever the given C<type> is used, C<push_read> will invoke the code
		1145	reference with the handle object, the callback and the remaining
		1146	arguments.
		1147
		1148	The code reference is supposed to return a callback (usually a closure)
		1149	that works as a plain read callback (see C<< ->push_read ($cb) >>).
		1150
		1151	It should invoke the passed callback when it is done reading (remember to
		1152	pass C<$handle> as first argument as all other callbacks do that).
		1153
		1154	Note that this is a function, and all types registered this way will be
		1155	global, so try to use unique names.
		1156
		1157	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,
		1158	search for C<register_read_type>)).
600		1159
601	=item $handle->stop_read	1160	=item $handle->stop_read
602		1161
603	=item $handle->start_read	1162	=item $handle->start_read
604		1163
605	In rare cases you actually do not want to read anything from the	1164	In rare cases you actually do not want to read anything from the
606	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1165	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
607	any queued callbacks will be executed then. To start reading again, call	1166	any queued callbacks will be executed then. To start reading again, call
608	C<start_read>.	1167	C<start_read>.
609		1168
		1169	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1170	you change the C<on_read> callback or push/unshift a read callback, and it
		1171	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1172	there are any read requests in the queue.
		1173
610	=cut	1174	=cut
611		1175
612	sub stop_read {	1176	sub stop_read {
613	my ($self) = @_;	1177	my ($self) = @_;
614		1178
615	delete $self->{rw};	1179	delete $self->{_rw};
616	}	1180	}
617		1181
618	sub start_read {	1182	sub start_read {
619	my ($self) = @_;	1183	my ($self) = @_;
620		1184
621	unless ($self->{rw} \|\| $self->{eof}) {	1185	unless ($self->{_rw} \|\| $self->{_eof}) {
622	Scalar::Util::weaken $self;	1186	Scalar::Util::weaken $self;
623		1187
624	$self->{rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1188	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
625	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1189	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};
626	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;	1190	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;
627		1191
628	if ($len > 0) {	1192	if ($len > 0) {
		1193	$self->{_activity} = AnyEvent->now;
		1194
629	$self->{filter_r}	1195	$self->{filter_r}
630	? $self->{filter_r}->($self, $rbuf)	1196	? $self->{filter_r}($self, $rbuf)
631	: $self->_drain_rbuf;	1197	: $self->{_in_drain} \|\| $self->_drain_rbuf;
632		1198
633	} elsif (defined $len) {	1199	} elsif (defined $len) {
634	delete $self->{rw};	1200	delete $self->{_rw};
635	$self->{eof} = 1;	1201	$self->{_eof} = 1;
636	$self->_drain_rbuf;	1202	$self->_drain_rbuf unless $self->{_in_drain};
637		1203
638	} elsif ($! != EAGAIN && $! != EINTR) {	1204	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
639	return $self->error;	1205	return $self->_error ($!, 1);
640	}	1206	}
641	});	1207	});
642	}	1208	}
643	}	1209	}
644		1210
645	sub _dotls {	1211	sub _dotls {
646	my ($self) = @_;	1212	my ($self) = @_;
647		1213
		1214	my $buf;
		1215
648	if (length $self->{tls_wbuf}) {	1216	if (length $self->{_tls_wbuf}) {
649	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{tls_wbuf})) > 0) {	1217	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
650	substr $self->{tls_wbuf}, 0, $len, "";	1218	substr $self->{_tls_wbuf}, 0, $len, "";
651	}	1219	}
652	}	1220	}
653		1221
654	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{tls_wbio}))) {	1222	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {
655	$self->{wbuf} .= $buf;	1223	$self->{wbuf} .= $buf;
656	$self->_drain_wbuf;	1224	$self->_drain_wbuf;
657	}	1225	}
658		1226
659	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {	1227	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {
		1228	if (length $buf) {
660	$self->{rbuf} .= $buf;	1229	$self->{rbuf} .= $buf;
661	$self->_drain_rbuf;	1230	$self->_drain_rbuf unless $self->{_in_drain};
		1231	} else {
		1232	# let's treat SSL-eof as we treat normal EOF
		1233	$self->{_eof} = 1;
		1234	$self->_shutdown;
		1235	return;
		1236	}
662	}	1237	}
663		1238
664	my $err = Net::SSLeay::get_error ($self->{tls}, -1);	1239	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
665		1240
666	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {	1241	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
667	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {	1242	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
668	$self->error;	1243	return $self->_error ($!, 1);
669	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {	1244	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
670	$! = &Errno::EIO;	1245	return $self->_error (&Errno::EIO, 1);
671	$self->error;
672	}	1246	}
673		1247
674	# all others are fine for our purposes	1248	# all others are fine for our purposes
675	}	1249	}
676	}	1250	}
677		1251
678	# TODO: maybe document...	1252	=item $handle->starttls ($tls[, $tls_ctx])
		1253
		1254	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
		1255	object is created, you can also do that at a later time by calling
		1256	C<starttls>.
		1257
		1258	The first argument is the same as the C<tls> constructor argument (either
		1259	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
		1260
		1261	The second argument is the optional C<Net::SSLeay::CTX> object that is
		1262	used when AnyEvent::Handle has to create its own TLS connection object.
		1263
		1264	The TLS connection object will end up in C<< $handle->{tls} >> after this
		1265	call and can be used or changed to your liking. Note that the handshake
		1266	might have already started when this function returns.
		1267
		1268	=cut
		1269
679	sub starttls {	1270	sub starttls {
680	my ($self, $ssl, $ctx) = @_;	1271	my ($self, $ssl, $ctx) = @_;
		1272
		1273	$self->stoptls;
681		1274
682	if ($ssl eq "accept") {	1275	if ($ssl eq "accept") {
683	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1276	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());
684	Net::SSLeay::set_accept_state ($ssl);	1277	Net::SSLeay::set_accept_state ($ssl);
685	} elsif ($ssl eq "connect") {	1278	} elsif ($ssl eq "connect") {
…		…
691		1284
692	# basically, this is deep magic (because SSL_read should have the same issues)	1285	# basically, this is deep magic (because SSL_read should have the same issues)
693	# but the openssl maintainers basically said: "trust us, it just works".	1286	# but the openssl maintainers basically said: "trust us, it just works".
694	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1287	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
695	# and mismaintained ssleay-module doesn't even offer them).	1288	# and mismaintained ssleay-module doesn't even offer them).
		1289	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
696	Net::SSLeay::CTX_set_mode ($self->{tls},	1290	Net::SSLeay::CTX_set_mode ($self->{tls},
697	(eval { Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)	1291	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)
698	\| (eval { Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));	1292	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));
699		1293
700	$self->{tls_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1294	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
701	$self->{tls_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1295	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
702		1296
703	Net::SSLeay::set_bio ($ssl, $self->{tls_rbio}, $self->{tls_wbio});	1297	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});
704		1298
705	$self->{filter_w} = sub {	1299	$self->{filter_w} = sub {
706	$_[0]{tls_wbuf} .= ${$_[1]};	1300	$_[0]{_tls_wbuf} .= ${$_[1]};
707	&_dotls;	1301	&_dotls;
708	};	1302	};
709	$self->{filter_r} = sub {	1303	$self->{filter_r} = sub {
710	Net::SSLeay::BIO_write ($_[0]{tls_rbio}, ${$_[1]});	1304	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
711	&_dotls;	1305	&_dotls;
712	};	1306	};
713	}	1307	}
714		1308
		1309	=item $handle->stoptls
		1310
		1311	Destroys the SSL connection, if any. Partial read or write data will be
		1312	lost.
		1313
		1314	=cut
		1315
		1316	sub stoptls {
		1317	my ($self) = @_;
		1318
		1319	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};
		1320
		1321	delete $self->{_rbio};
		1322	delete $self->{_wbio};
		1323	delete $self->{_tls_wbuf};
		1324	delete $self->{filter_r};
		1325	delete $self->{filter_w};
		1326	}
		1327
715	sub DESTROY {	1328	sub DESTROY {
716	my $self = shift;	1329	my $self = shift;
717		1330
718	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1331	$self->stoptls;
		1332
		1333	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1334
		1335	if ($linger && length $self->{wbuf}) {
		1336	my $fh = delete $self->{fh};
		1337	my $wbuf = delete $self->{wbuf};
		1338
		1339	my @linger;
		1340
		1341	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {
		1342	my $len = syswrite $fh, $wbuf, length $wbuf;
		1343
		1344	if ($len > 0) {
		1345	substr $wbuf, 0, $len, "";
		1346	} else {
		1347	@linger = (); # end
		1348	}
		1349	});
		1350	push @linger, AnyEvent->timer (after => $linger, cb => sub {
		1351	@linger = ();
		1352	});
		1353	}
719	}	1354	}
720		1355
721	=item AnyEvent::Handle::TLS_CTX	1356	=item AnyEvent::Handle::TLS_CTX
722		1357
723	This function creates and returns the Net::SSLeay::CTX object used by	1358	This function creates and returns the Net::SSLeay::CTX object used by
…		…
753	}	1388	}
754	}	1389	}
755		1390
756	=back	1391	=back
757		1392
		1393	=head1 SUBCLASSING AnyEvent::Handle
		1394
		1395	In many cases, you might want to subclass AnyEvent::Handle.
		1396
		1397	To make this easier, a given version of AnyEvent::Handle uses these
		1398	conventions:
		1399
		1400	=over 4
		1401
		1402	=item * all constructor arguments become object members.
		1403
		1404	At least initially, when you pass a C<tls>-argument to the constructor it
		1405	will end up in C<< $handle->{tls} >>. Those members might be changes or
		1406	mutated later on (for example C<tls> will hold the TLS connection object).
		1407
		1408	=item * other object member names are prefixed with an C<_>.
		1409
		1410	All object members not explicitly documented (internal use) are prefixed
		1411	with an underscore character, so the remaining non-C<_>-namespace is free
		1412	for use for subclasses.
		1413
		1414	=item * all members not documented here and not prefixed with an underscore
		1415	are free to use in subclasses.
		1416
		1417	Of course, new versions of AnyEvent::Handle may introduce more "public"
		1418	member variables, but thats just life, at least it is documented.
		1419
		1420	=back
		1421
758	=head1 AUTHOR	1422	=head1 AUTHOR
759		1423
760	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	1424	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
761		1425
762	=cut	1426	=cut

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.24 by root, Sat May 24 15:11:46 2008 UTC vs. Revision 1.69 by root, Sun Jun 15 21:44:56 2008 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.24 by root, Sat May 24 15:11:46 2008 UTC vs.
Revision 1.69 by root, Sun Jun 15 21:44:56 2008 UTC