ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.79 by root, Sun Jul 27 08:37:56 2008 UTC vs.
Revision 1.206 by root, Mon Nov 15 19:49:31 2010 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.22;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes, and other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
		40
54	In the following, when the documentation refers to of "bytes" then this	41	In the following, where the documentation refers to "bytes", it means
55	means characters. As sysread and syswrite are used for all I/O, their	42	characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
57		47
58	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
59	argument.	49	argument.
60		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
		80	sub MAX_READ_SIZE() { 131072 }
		81
61	=head1 METHODS	82	=head1 METHODS
62		83
63	=over 4	84	=over 4
64		85
65	=item B<new (%args)>	86	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
66		87
67	The constructor supports these arguments (all as key => value pairs).	88	The constructor supports these arguments (all as C<< key => value >> pairs).
68		89
69	=over 4	90	=over 4
70		91
71	=item fh => $filehandle [MANDATORY]	92	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		93
73	The filehandle this L<AnyEvent::Handle> object will operate on.	94	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	95	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	96	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		97	that mode.
77		98
		99	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		100
		101	Try to connect to the specified host and service (port), using
		102	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		103	default C<peername>.
		104
		105	You have to specify either this parameter, or C<fh>, above.
		106
		107	It is possible to push requests on the read and write queues, and modify
		108	properties of the stream, even while AnyEvent::Handle is connecting.
		109
		110	When this parameter is specified, then the C<on_prepare>,
		111	C<on_connect_error> and C<on_connect> callbacks will be called under the
		112	appropriate circumstances:
		113
		114	=over 4
		115
78	=item on_eof => $cb->($handle)	116	=item on_prepare => $cb->($handle)
79		117
80	Set the callback to be called when an end-of-file condition is detected,	118	This (rarely used) callback is called before a new connection is
81	i.e. in the case of a socket, when the other side has closed the	119	attempted, but after the file handle has been created. It could be used to
82	connection cleanly.	120	prepare the file handle with parameters required for the actual connect
		121	(as opposed to settings that can be changed when the connection is already
		122	established).
83		123
84	While not mandatory, it is highly recommended to set an eof callback,	124	The return value of this callback should be the connect timeout value in
85	otherwise you might end up with a closed socket while you are still	125	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
86	waiting for data.	126	default timeout is to be used).
87		127
		128	=item on_connect => $cb->($handle, $host, $port, $retry->())
		129
		130	This callback is called when a connection has been successfully established.
		131
		132	The peer's numeric host and port (the socket peername) are passed as
		133	parameters, together with a retry callback.
		134
		135	If, for some reason, the handle is not acceptable, calling C<$retry>
		136	will continue with the next connection target (in case of multi-homed
		137	hosts or SRV records there can be multiple connection endpoints). At the
		138	time it is called the read and write queues, eof status, tls status and
		139	similar properties of the handle will have been reset.
		140
		141	In most cases, you should ignore the C<$retry> parameter.
		142
		143	=item on_connect_error => $cb->($handle, $message)
		144
		145	This callback is called when the connection could not be
		146	established. C<$!> will contain the relevant error code, and C<$message> a
		147	message describing it (usually the same as C<"$!">).
		148
		149	If this callback isn't specified, then C<on_error> will be called with a
		150	fatal error instead.
		151
		152	=back
		153
88	=item on_error => $cb->($handle, $fatal)	154	=item on_error => $cb->($handle, $fatal, $message)
89		155
90	This is the error callback, which is called when, well, some error	156	This is the error callback, which is called when, well, some error
91	occured, such as not being able to resolve the hostname, failure to	157	occured, such as not being able to resolve the hostname, failure to
92	connect or a read error.	158	connect, or a read error.
93		159
94	Some errors are fatal (which is indicated by C<$fatal> being true). On	160	Some errors are fatal (which is indicated by C<$fatal> being true). On
95	fatal errors the handle object will be shut down and will not be	161	fatal errors the handle object will be destroyed (by a call to C<< ->
		162	destroy >>) after invoking the error callback (which means you are free to
		163	examine the handle object). Examples of fatal errors are an EOF condition
		164	with active (but unsatisfiable) read watchers (C<EPIPE>) or I/O errors. In
		165	cases where the other side can close the connection at will, it is
		166	often easiest to not report C<EPIPE> errors in this callback.
		167
		168	AnyEvent::Handle tries to find an appropriate error code for you to check
		169	against, but in some cases (TLS errors), this does not work well. It is
		170	recommended to always output the C<$message> argument in human-readable
		171	error messages (it's usually the same as C<"$!">).
		172
96	usable. Non-fatal errors can be retried by simply returning, but it is	173	Non-fatal errors can be retried by returning, but it is recommended
97	recommended to simply ignore this parameter and instead abondon the handle	174	to simply ignore this parameter and instead abondon the handle object
98	object when this callback is invoked.	175	when this callback is invoked. Examples of non-fatal errors are timeouts
		176	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
99		177
100	On callback entrance, the value of C<$!> contains the operating system	178	On entry to the callback, the value of C<$!> contains the operating
101	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	179	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		180	C<EPROTO>).
102		181
103	While not mandatory, it is I<highly> recommended to set this callback, as	182	While not mandatory, it is I<highly> recommended to set this callback, as
104	you will not be notified of errors otherwise. The default simply calls	183	you will not be notified of errors otherwise. The default just calls
105	C<croak>.	184	C<croak>.
106		185
107	=item on_read => $cb->($handle)	186	=item on_read => $cb->($handle)
108		187
109	This sets the default read callback, which is called when data arrives	188	This sets the default read callback, which is called when data arrives
110	and no read request is in the queue (unlike read queue callbacks, this	189	and no read request is in the queue (unlike read queue callbacks, this
111	callback will only be called when at least one octet of data is in the	190	callback will only be called when at least one octet of data is in the
112	read buffer).	191	read buffer).
113		192
114	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	193	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
115	method or access the C<$handle->{rbuf}> member directly.	194	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		195	must not enlarge or modify the read buffer, you can only remove data at
		196	the beginning from it.
116		197
		198	You can also call C<< ->push_read (...) >> or any other function that
		199	modifies the read queue. Or do both. Or ...
		200
117	When an EOF condition is detected then AnyEvent::Handle will first try to	201	When an EOF condition is detected, AnyEvent::Handle will first try to
118	feed all the remaining data to the queued callbacks and C<on_read> before	202	feed all the remaining data to the queued callbacks and C<on_read> before
119	calling the C<on_eof> callback. If no progress can be made, then a fatal	203	calling the C<on_eof> callback. If no progress can be made, then a fatal
120	error will be raised (with C<$!> set to C<EPIPE>).	204	error will be raised (with C<$!> set to C<EPIPE>).
121		205
		206	Note that, unlike requests in the read queue, an C<on_read> callback
		207	doesn't mean you I<require> some data: if there is an EOF and there
		208	are outstanding read requests then an error will be flagged. With an
		209	C<on_read> callback, the C<on_eof> callback will be invoked.
		210
		211	=item on_eof => $cb->($handle)
		212
		213	Set the callback to be called when an end-of-file condition is detected,
		214	i.e. in the case of a socket, when the other side has closed the
		215	connection cleanly, and there are no outstanding read requests in the
		216	queue (if there are read requests, then an EOF counts as an unexpected
		217	connection close and will be flagged as an error).
		218
		219	For sockets, this just means that the other side has stopped sending data,
		220	you can still try to write data, and, in fact, one can return from the EOF
		221	callback and continue writing data, as only the read part has been shut
		222	down.
		223
		224	If an EOF condition has been detected but no C<on_eof> callback has been
		225	set, then a fatal error will be raised with C<$!> set to <0>.
		226
122	=item on_drain => $cb->($handle)	227	=item on_drain => $cb->($handle)
123		228
124	This sets the callback that is called when the write buffer becomes empty	229	This sets the callback that is called when the write buffer becomes empty
125	(or when the callback is set and the buffer is empty already).	230	(or immediately if the buffer is empty already).
126		231
127	To append to the write buffer, use the C<< ->push_write >> method.	232	To append to the write buffer, use the C<< ->push_write >> method.
128		233
129	This callback is useful when you don't want to put all of your write data	234	This callback is useful when you don't want to put all of your write data
130	into the queue at once, for example, when you want to write the contents	235	into the queue at once, for example, when you want to write the contents
…		…
132	memory and push it into the queue, but instead only read more data from	237	memory and push it into the queue, but instead only read more data from
133	the file when the write queue becomes empty.	238	the file when the write queue becomes empty.
134		239
135	=item timeout => $fractional_seconds	240	=item timeout => $fractional_seconds
136		241
		242	=item rtimeout => $fractional_seconds
		243
		244	=item wtimeout => $fractional_seconds
		245
137	If non-zero, then this enables an "inactivity" timeout: whenever this many	246	If non-zero, then these enables an "inactivity" timeout: whenever this
138	seconds pass without a successful read or write on the underlying file	247	many seconds pass without a successful read or write on the underlying
139	handle, the C<on_timeout> callback will be invoked (and if that one is	248	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
140	missing, an C<ETIMEDOUT> error will be raised).	249	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		250	error will be raised).
141		251
		252	There are three variants of the timeouts that work independently
		253	of each other, for both read and write, just read, and just write:
		254	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		255	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		256	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		257
142	Note that timeout processing is also active when you currently do not have	258	Note that timeout processing is active even when you do not have
143	any outstanding read or write requests: If you plan to keep the connection	259	any outstanding read or write requests: If you plan to keep the connection
144	idle then you should disable the timout temporarily or ignore the timeout	260	idle then you should disable the timeout temporarily or ignore the timeout
145	in the C<on_timeout> callback.	261	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		262	restart the timeout.
146		263
147	Zero (the default) disables this timeout.	264	Zero (the default) disables this timeout.
148		265
149	=item on_timeout => $cb->($handle)	266	=item on_timeout => $cb->($handle)
150		267
…		…
154		271
155	=item rbuf_max => <bytes>	272	=item rbuf_max => <bytes>
156		273
157	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	274	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
158	when the read buffer ever (strictly) exceeds this size. This is useful to	275	when the read buffer ever (strictly) exceeds this size. This is useful to
159	avoid denial-of-service attacks.	276	avoid some forms of denial-of-service attacks.
160		277
161	For example, a server accepting connections from untrusted sources should	278	For example, a server accepting connections from untrusted sources should
162	be configured to accept only so-and-so much data that it cannot act on	279	be configured to accept only so-and-so much data that it cannot act on
163	(for example, when expecting a line, an attacker could send an unlimited	280	(for example, when expecting a line, an attacker could send an unlimited
164	amount of data without a callback ever being called as long as the line	281	amount of data without a callback ever being called as long as the line
165	isn't finished).	282	isn't finished).
166		283
167	=item autocork => <boolean>	284	=item autocork => <boolean>
168		285
169	When disabled (the default), then C<push_write> will try to immediately	286	When disabled (the default), C<push_write> will try to immediately
170	write the data to the handle if possible. This avoids having to register	287	write the data to the handle if possible. This avoids having to register
171	a write watcher and wait for the next event loop iteration, but can be	288	a write watcher and wait for the next event loop iteration, but can
172	inefficient if you write multiple small chunks (this disadvantage is	289	be inefficient if you write multiple small chunks (on the wire, this
173	usually avoided by your kernel's nagle algorithm, see C<low_delay>).	290	disadvantage is usually avoided by your kernel's nagle algorithm, see
		291	C<no_delay>, but this option can save costly syscalls).
174		292
175	When enabled, then writes will always be queued till the next event loop	293	When enabled, writes will always be queued till the next event loop
176	iteration. This is efficient when you do many small writes per iteration,	294	iteration. This is efficient when you do many small writes per iteration,
177	but less efficient when you do a single write only.	295	but less efficient when you do a single write only per iteration (or when
		296	the write buffer often is full). It also increases write latency.
178		297
179	=item no_delay => <boolean>	298	=item no_delay => <boolean>
180		299
181	When doing small writes on sockets, your operating system kernel might	300	When doing small writes on sockets, your operating system kernel might
182	wait a bit for more data before actually sending it out. This is called	301	wait a bit for more data before actually sending it out. This is called
183	the Nagle algorithm, and usually it is beneficial.	302	the Nagle algorithm, and usually it is beneficial.
184		303
185	In some situations you want as low a delay as possible, which cna be	304	In some situations you want as low a delay as possible, which can be
186	accomplishd by setting this option to true.	305	accomplishd by setting this option to a true value.
187		306
188	The default is your opertaing system's default behaviour, this option	307	The default is your operating system's default behaviour (most likely
189	explicitly enables or disables it, if possible.	308	enabled). This option explicitly enables or disables it, if possible.
		309
		310	=item keepalive => <boolean>
		311
		312	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		313	normally, TCP connections have no time-out once established, so TCP
		314	connections, once established, can stay alive forever even when the other
		315	side has long gone. TCP keepalives are a cheap way to take down long-lived
		316	TCP connections when the other side becomes unreachable. While the default
		317	is OS-dependent, TCP keepalives usually kick in after around two hours,
		318	and, if the other side doesn't reply, take down the TCP connection some 10
		319	to 15 minutes later.
		320
		321	It is harmless to specify this option for file handles that do not support
		322	keepalives, and enabling it on connections that are potentially long-lived
		323	is usually a good idea.
		324
		325	=item oobinline => <boolean>
		326
		327	BSD majorly fucked up the implementation of TCP urgent data. The result
		328	is that almost no OS implements TCP according to the specs, and every OS
		329	implements it slightly differently.
		330
		331	If you want to handle TCP urgent data, then setting this flag (the default
		332	is enabled) gives you the most portable way of getting urgent data, by
		333	putting it into the stream.
		334
		335	Since BSD emulation of OOB data on top of TCP's urgent data can have
		336	security implications, AnyEvent::Handle sets this flag automatically
		337	unless explicitly specified. Note that setting this flag after
		338	establishing a connection I<may> be a bit too late (data loss could
		339	already have occured on BSD systems), but at least it will protect you
		340	from most attacks.
190		341
191	=item read_size => <bytes>	342	=item read_size => <bytes>
192		343
193	The default read block size (the amount of bytes this module will try to read	344	The initial read block size, the number of bytes this module will try to
194	during each (loop iteration). Default: C<8192>.	345	read during each loop iteration. Each handle object will consume at least
		346	this amount of memory for the read buffer as well, so when handling many
		347	connections requirements). See also C<max_read_size>. Default: C<2048>.
		348
		349	=item max_read_size => <bytes>
		350
		351	The maximum read buffer size used by the dynamic adjustment
		352	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		353	one go it will double C<read_size> up to the maximum given by this
		354	option. Default: C<131072> or C<read_size>, whichever is higher.
195		355
196	=item low_water_mark => <bytes>	356	=item low_water_mark => <bytes>
197		357
198	Sets the amount of bytes (default: C<0>) that make up an "empty" write	358	Sets the number of bytes (default: C<0>) that make up an "empty" write
199	buffer: If the write reaches this size or gets even samller it is	359	buffer: If the buffer reaches this size or gets even samller it is
200	considered empty.	360	considered empty.
201		361
		362	Sometimes it can be beneficial (for performance reasons) to add data to
		363	the write buffer before it is fully drained, but this is a rare case, as
		364	the operating system kernel usually buffers data as well, so the default
		365	is good in almost all cases.
		366
202	=item linger => <seconds>	367	=item linger => <seconds>
203		368
204	If non-zero (default: C<3600>), then the destructor of the	369	If this is non-zero (default: C<3600>), the destructor of the
205	AnyEvent::Handle object will check wether there is still outstanding write	370	AnyEvent::Handle object will check whether there is still outstanding
206	data and will install a watcher that will write out this data. No errors	371	write data and will install a watcher that will write this data to the
207	will be reported (this mostly matches how the operating system treats	372	socket. No errors will be reported (this mostly matches how the operating
208	outstanding data at socket close time).	373	system treats outstanding data at socket close time).
209		374
210	This will not work for partial TLS data that could not yet been	375	This will not work for partial TLS data that could not be encoded
211	encoded. This data will be lost.	376	yet. This data will be lost. Calling the C<stoptls> method in time might
		377	help.
		378
		379	=item peername => $string
		380
		381	A string used to identify the remote site - usually the DNS hostname
		382	(I<not> IDN!) used to create the connection, rarely the IP address.
		383
		384	Apart from being useful in error messages, this string is also used in TLS
		385	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		386	verification will be skipped when C<peername> is not specified or is
		387	C<undef>.
212		388
213	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	389	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
214		390
215	When this parameter is given, it enables TLS (SSL) mode, that means it	391	When this parameter is given, it enables TLS (SSL) mode, that means
216	will start making tls handshake and will transparently encrypt/decrypt	392	AnyEvent will start a TLS handshake as soon as the connection has been
217	data.	393	established and will transparently encrypt/decrypt data afterwards.
		394
		395	All TLS protocol errors will be signalled as C<EPROTO>, with an
		396	appropriate error message.
218		397
219	TLS mode requires Net::SSLeay to be installed (it will be loaded	398	TLS mode requires Net::SSLeay to be installed (it will be loaded
220	automatically when you try to create a TLS handle).	399	automatically when you try to create a TLS handle): this module doesn't
		400	have a dependency on that module, so if your module requires it, you have
		401	to add the dependency yourself.
221		402
222	For the TLS server side, use C<accept>, and for the TLS client side of a	403	Unlike TCP, TLS has a server and client side: for the TLS server side, use
223	connection, use C<connect> mode.	404	C<accept>, and for the TLS client side of a connection, use C<connect>
		405	mode.
224		406
225	You can also provide your own TLS connection object, but you have	407	You can also provide your own TLS connection object, but you have
226	to make sure that you call either C<Net::SSLeay::set_connect_state>	408	to make sure that you call either C<Net::SSLeay::set_connect_state>
227	or C<Net::SSLeay::set_accept_state> on it before you pass it to	409	or C<Net::SSLeay::set_accept_state> on it before you pass it to
228	AnyEvent::Handle.	410	AnyEvent::Handle. Also, this module will take ownership of this connection
		411	object.
229		412
		413	At some future point, AnyEvent::Handle might switch to another TLS
		414	implementation, then the option to use your own session object will go
		415	away.
		416
		417	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		418	passing in the wrong integer will lead to certain crash. This most often
		419	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		420	segmentation fault.
		421
230	See the C<starttls> method if you need to start TLS negotiation later.	422	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
231		423
232	=item tls_ctx => $ssl_ctx	424	=item tls_ctx => $anyevent_tls
233		425
234	Use the given Net::SSLeay::CTX object to create the new TLS connection	426	Use the given C<AnyEvent::TLS> object to create the new TLS connection
235	(unless a connection object was specified directly). If this parameter is	427	(unless a connection object was specified directly). If this parameter is
236	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	428	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
237		429
		430	Instead of an object, you can also specify a hash reference with C<< key
		431	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		432	new TLS context object.
		433
		434	=item on_starttls => $cb->($handle, $success[, $error_message])
		435
		436	This callback will be invoked when the TLS/SSL handshake has finished. If
		437	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		438	(C<on_stoptls> will not be called in this case).
		439
		440	The session in C<< $handle->{tls} >> can still be examined in this
		441	callback, even when the handshake was not successful.
		442
		443	TLS handshake failures will not cause C<on_error> to be invoked when this
		444	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		445
		446	Without this callback, handshake failures lead to C<on_error> being
		447	called as usual.
		448
		449	Note that you cannot just call C<starttls> again in this callback. If you
		450	need to do that, start an zero-second timer instead whose callback can
		451	then call C<< ->starttls >> again.
		452
		453	=item on_stoptls => $cb->($handle)
		454
		455	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		456	set, then it will be invoked after freeing the TLS session. If it is not,
		457	then a TLS shutdown condition will be treated like a normal EOF condition
		458	on the handle.
		459
		460	The session in C<< $handle->{tls} >> can still be examined in this
		461	callback.
		462
		463	This callback will only be called on TLS shutdowns, not when the
		464	underlying handle signals EOF.
		465
238	=item json => JSON or JSON::XS object	466	=item json => JSON or JSON::XS object
239		467
240	This is the json coder object used by the C<json> read and write types.	468	This is the json coder object used by the C<json> read and write types.
241		469
242	If you don't supply it, then AnyEvent::Handle will create and use a	470	If you don't supply it, then AnyEvent::Handle will create and use a
243	suitable one, which will write and expect UTF-8 encoded JSON texts.	471	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		472	texts.
244		473
245	Note that you are responsible to depend on the JSON module if you want to	474	Note that you are responsible to depend on the JSON module if you want to
246	use this functionality, as AnyEvent does not have a dependency itself.	475	use this functionality, as AnyEvent does not have a dependency itself.
247		476
248	=item filter_r => $cb
249
250	=item filter_w => $cb
251
252	These exist, but are undocumented at this time.
253
254	=back	477	=back
255		478
256	=cut	479	=cut
257		480
258	sub new {	481	sub new {
259	my $class = shift;	482	my $class = shift;
260
261	my $self = bless { @_ }, $class;	483	my $self = bless { @_ }, $class;
262		484
263	$self->{fh} or Carp::croak "mandatory argument fh is missing";	485	if ($self->{fh}) {
		486	$self->_start;
		487	return unless $self->{fh}; # could be gone by now
		488
		489	} elsif ($self->{connect}) {
		490	require AnyEvent::Socket;
		491
		492	$self->{peername} = $self->{connect}[0]
		493	unless exists $self->{peername};
		494
		495	$self->{_skip_drain_rbuf} = 1;
		496
		497	{
		498	Scalar::Util::weaken (my $self = $self);
		499
		500	$self->{_connect} =
		501	AnyEvent::Socket::tcp_connect (
		502	$self->{connect}[0],
		503	$self->{connect}[1],
		504	sub {
		505	my ($fh, $host, $port, $retry) = @_;
		506
		507	delete $self->{_connect}; # no longer needed
		508
		509	if ($fh) {
		510	$self->{fh} = $fh;
		511
		512	delete $self->{_skip_drain_rbuf};
		513	$self->_start;
		514
		515	$self->{on_connect}
		516	and $self->{on_connect}($self, $host, $port, sub {
		517	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		518	$self->{_skip_drain_rbuf} = 1;
		519	&$retry;
		520	});
		521
		522	} else {
		523	if ($self->{on_connect_error}) {
		524	$self->{on_connect_error}($self, "$!");
		525	$self->destroy;
		526	} else {
		527	$self->_error ($!, 1);
		528	}
		529	}
		530	},
		531	sub {
		532	local $self->{fh} = $_[0];
		533
		534	$self->{on_prepare}
		535	? $self->{on_prepare}->($self)
		536	: ()
		537	}
		538	);
		539	}
		540
		541	} else {
		542	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		543	}
		544
		545	$self
		546	}
		547
		548	sub _start {
		549	my ($self) = @_;
		550
		551	# too many clueless people try to use udp and similar sockets
		552	# with AnyEvent::Handle, do them a favour.
		553	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		554	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		555	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
264		556
265	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	557	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
266		558
267	if ($self->{tls}) {	559	$self->{_activity} =
268	require Net::SSLeay;	560	$self->{_ractivity} =
		561	$self->{_wactivity} = AE::now;
		562
		563	$self->{read_size} ||= 2048;
		564	$self->{max_read_size} = $self->{read_size}
		565	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		566
		567	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		568	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		569	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		570
		571	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		572	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		573
		574	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		575
269	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	576	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
270	}	577	if $self->{tls};
271		578
272	$self->{_activity} = AnyEvent->now;
273	$self->_timeout;
274
275	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	579	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
276	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
277		580
278	$self->start_read	581	$self->start_read
279	if $self->{on_read};	582	if $self->{on_read} || @{ $self->{_queue} };
280		583
281	$self	584	$self->_drain_wbuf;
282	}
283
284	sub _shutdown {
285	my ($self) = @_;
286
287	delete $self->{_tw};
288	delete $self->{_rw};
289	delete $self->{_ww};
290	delete $self->{fh};
291
292	$self->stoptls;
293	}	585	}
294		586
295	sub _error {	587	sub _error {
296	my ($self, $errno, $fatal) = @_;	588	my ($self, $errno, $fatal, $message) = @_;
297
298	$self->_shutdown
299	if $fatal;
300		589
301	$! = $errno;	590	$! = $errno;
		591	$message ||= "$!";
302		592
303	if ($self->{on_error}) {	593	if ($self->{on_error}) {
304	$self->{on_error}($self, $fatal);	594	$self->{on_error}($self, $fatal, $message);
305	} else {	595	$self->destroy if $fatal;
		596	} elsif ($self->{fh} || $self->{connect}) {
		597	$self->destroy;
306	Carp::croak "AnyEvent::Handle uncaught error: $!";	598	Carp::croak "AnyEvent::Handle uncaught error: $message";
307	}	599	}
308	}	600	}
309		601
310	=item $fh = $handle->fh	602	=item $fh = $handle->fh
311		603
312	This method returns the file handle of the L<AnyEvent::Handle> object.	604	This method returns the file handle used to create the L<AnyEvent::Handle> object.
313		605
314	=cut	606	=cut
315		607
316	sub fh { $_[0]{fh} }	608	sub fh { $_[0]{fh} }
317		609
…		…
335	$_[0]{on_eof} = $_[1];	627	$_[0]{on_eof} = $_[1];
336	}	628	}
337		629
338	=item $handle->on_timeout ($cb)	630	=item $handle->on_timeout ($cb)
339		631
340	Replace the current C<on_timeout> callback, or disables the callback	632	=item $handle->on_rtimeout ($cb)
341	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
342	argument.
343		633
344	=cut	634	=item $handle->on_wtimeout ($cb)
345		635
346	sub on_timeout {	636	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
347	$_[0]{on_timeout} = $_[1];	637	callback, or disables the callback (but not the timeout) if C<$cb> =
348	}	638	C<undef>. See the C<timeout> constructor argument and method.
		639
		640	=cut
		641
		642	# see below
349		643
350	=item $handle->autocork ($boolean)	644	=item $handle->autocork ($boolean)
351		645
352	Enables or disables the current autocork behaviour (see C<autocork>	646	Enables or disables the current autocork behaviour (see C<autocork>
353	constructor argument).	647	constructor argument). Changes will only take effect on the next write.
354		648
355	=cut	649	=cut
		650
		651	sub autocork {
		652	$_[0]{autocork} = $_[1];
		653	}
356		654
357	=item $handle->no_delay ($boolean)	655	=item $handle->no_delay ($boolean)
358		656
359	Enables or disables the C<no_delay> setting (see constructor argument of	657	Enables or disables the C<no_delay> setting (see constructor argument of
360	the same name for details).	658	the same name for details).
…		…
362	=cut	660	=cut
363		661
364	sub no_delay {	662	sub no_delay {
365	$_[0]{no_delay} = $_[1];	663	$_[0]{no_delay} = $_[1];
366		664
		665	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		666	if $_[0]{fh};
		667	}
		668
		669	=item $handle->keepalive ($boolean)
		670
		671	Enables or disables the C<keepalive> setting (see constructor argument of
		672	the same name for details).
		673
		674	=cut
		675
		676	sub keepalive {
		677	$_[0]{keepalive} = $_[1];
		678
367	eval {	679	eval {
368	local $SIG{__DIE__};	680	local $SIG{__DIE__};
369	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	681	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		682	if $_[0]{fh};
370	};	683	};
371	}	684	}
372		685
		686	=item $handle->oobinline ($boolean)
		687
		688	Enables or disables the C<oobinline> setting (see constructor argument of
		689	the same name for details).
		690
		691	=cut
		692
		693	sub oobinline {
		694	$_[0]{oobinline} = $_[1];
		695
		696	eval {
		697	local $SIG{__DIE__};
		698	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		699	if $_[0]{fh};
		700	};
		701	}
		702
		703	=item $handle->keepalive ($boolean)
		704
		705	Enables or disables the C<keepalive> setting (see constructor argument of
		706	the same name for details).
		707
		708	=cut
		709
		710	sub keepalive {
		711	$_[0]{keepalive} = $_[1];
		712
		713	eval {
		714	local $SIG{__DIE__};
		715	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		716	if $_[0]{fh};
		717	};
		718	}
		719
		720	=item $handle->on_starttls ($cb)
		721
		722	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		723
		724	=cut
		725
		726	sub on_starttls {
		727	$_[0]{on_starttls} = $_[1];
		728	}
		729
		730	=item $handle->on_stoptls ($cb)
		731
		732	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		733
		734	=cut
		735
		736	sub on_stoptls {
		737	$_[0]{on_stoptls} = $_[1];
		738	}
		739
		740	=item $handle->rbuf_max ($max_octets)
		741
		742	Configures the C<rbuf_max> setting (C<undef> disables it).
		743
		744	=cut
		745
		746	sub rbuf_max {
		747	$_[0]{rbuf_max} = $_[1];
		748	}
		749
373	#############################################################################	750	#############################################################################
374		751
375	=item $handle->timeout ($seconds)	752	=item $handle->timeout ($seconds)
376		753
		754	=item $handle->rtimeout ($seconds)
		755
		756	=item $handle->wtimeout ($seconds)
		757
377	Configures (or disables) the inactivity timeout.	758	Configures (or disables) the inactivity timeout.
378		759
379	=cut	760	=item $handle->timeout_reset
380		761
381	sub timeout {	762	=item $handle->rtimeout_reset
		763
		764	=item $handle->wtimeout_reset
		765
		766	Reset the activity timeout, as if data was received or sent.
		767
		768	These methods are cheap to call.
		769
		770	=cut
		771
		772	for my $dir ("", "r", "w") {
		773	my $timeout = "${dir}timeout";
		774	my $tw = "_${dir}tw";
		775	my $on_timeout = "on_${dir}timeout";
		776	my $activity = "_${dir}activity";
		777	my $cb;
		778
		779	*$on_timeout = sub {
		780	$_[0]{$on_timeout} = $_[1];
		781	};
		782
		783	*$timeout = sub {
382	my ($self, $timeout) = @_;	784	my ($self, $new_value) = @_;
383		785
		786	$new_value >= 0
		787	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		788
384	$self->{timeout} = $timeout;	789	$self->{$timeout} = $new_value;
385	$self->_timeout;	790	delete $self->{$tw}; &$cb;
386	}	791	};
387		792
		793	*{"${dir}timeout_reset"} = sub {
		794	$_[0]{$activity} = AE::now;
		795	};
		796
		797	# main workhorse:
388	# reset the timeout watcher, as neccessary	798	# reset the timeout watcher, as neccessary
389	# also check for time-outs	799	# also check for time-outs
390	sub _timeout {	800	$cb = sub {
391	my ($self) = @_;	801	my ($self) = @_;
392		802
393	if ($self->{timeout}) {	803	if ($self->{$timeout} && $self->{fh}) {
394	my $NOW = AnyEvent->now;	804	my $NOW = AE::now;
395		805
396	# when would the timeout trigger?	806	# when would the timeout trigger?
397	my $after = $self->{_activity} + $self->{timeout} - $NOW;	807	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
398		808
399	# now or in the past already?	809	# now or in the past already?
400	if ($after <= 0) {	810	if ($after <= 0) {
401	$self->{_activity} = $NOW;	811	$self->{$activity} = $NOW;
402		812
403	if ($self->{on_timeout}) {	813	if ($self->{$on_timeout}) {
404	$self->{on_timeout}($self);	814	$self->{$on_timeout}($self);
405	} else {	815	} else {
406	$self->_error (&Errno::ETIMEDOUT);	816	$self->_error (Errno::ETIMEDOUT);
		817	}
		818
		819	# callback could have changed timeout value, optimise
		820	return unless $self->{$timeout};
		821
		822	# calculate new after
		823	$after = $self->{$timeout};
407	}	824	}
408		825
409	# callback could have changed timeout value, optimise	826	Scalar::Util::weaken $self;
410	return unless $self->{timeout};	827	return unless $self; # ->error could have destroyed $self
411		828
412	# calculate new after	829	$self->{$tw} ||= AE::timer $after, 0, sub {
413	$after = $self->{timeout};	830	delete $self->{$tw};
		831	$cb->($self);
		832	};
		833	} else {
		834	delete $self->{$tw};
414	}	835	}
415
416	Scalar::Util::weaken $self;
417	return unless $self; # ->error could have destroyed $self
418
419	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
420	delete $self->{_tw};
421	$self->_timeout;
422	});
423	} else {
424	delete $self->{_tw};
425	}	836	}
426	}	837	}
427		838
428	#############################################################################	839	#############################################################################
429		840
…		…
445	=item $handle->on_drain ($cb)	856	=item $handle->on_drain ($cb)
446		857
447	Sets the C<on_drain> callback or clears it (see the description of	858	Sets the C<on_drain> callback or clears it (see the description of
448	C<on_drain> in the constructor).	859	C<on_drain> in the constructor).
449		860
		861	This method may invoke callbacks (and therefore the handle might be
		862	destroyed after it returns).
		863
450	=cut	864	=cut
451		865
452	sub on_drain {	866	sub on_drain {
453	my ($self, $cb) = @_;	867	my ($self, $cb) = @_;
454		868
455	$self->{on_drain} = $cb;	869	$self->{on_drain} = $cb;
456		870
457	$cb->($self)	871	$cb->($self)
458	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	872	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
459	}	873	}
460		874
461	=item $handle->push_write ($data)	875	=item $handle->push_write ($data)
462		876
463	Queues the given scalar to be written. You can push as much data as you	877	Queues the given scalar to be written. You can push as much data as you
464	want (only limited by the available memory), as C<AnyEvent::Handle>	878	want (only limited by the available memory), as C<AnyEvent::Handle>
465	buffers it independently of the kernel.	879	buffers it independently of the kernel.
466		880
		881	This method may invoke callbacks (and therefore the handle might be
		882	destroyed after it returns).
		883
467	=cut	884	=cut
468		885
469	sub _drain_wbuf {	886	sub _drain_wbuf {
470	my ($self) = @_;	887	my ($self) = @_;
471		888
…		…
474	Scalar::Util::weaken $self;	891	Scalar::Util::weaken $self;
475		892
476	my $cb = sub {	893	my $cb = sub {
477	my $len = syswrite $self->{fh}, $self->{wbuf};	894	my $len = syswrite $self->{fh}, $self->{wbuf};
478		895
479	if ($len >= 0) {	896	if (defined $len) {
480	substr $self->{wbuf}, 0, $len, "";	897	substr $self->{wbuf}, 0, $len, "";
481		898
482	$self->{_activity} = AnyEvent->now;	899	$self->{_activity} = $self->{_wactivity} = AE::now;
483		900
484	$self->{on_drain}($self)	901	$self->{on_drain}($self)
485	if $self->{low_water_mark} >= length $self->{wbuf}	902	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
486	&& $self->{on_drain};	903	&& $self->{on_drain};
487		904
488	delete $self->{_ww} unless length $self->{wbuf};	905	delete $self->{_ww} unless length $self->{wbuf};
489	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	906	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
490	$self->_error ($!, 1);	907	$self->_error ($!, 1);
…		…
493		910
494	# try to write data immediately	911	# try to write data immediately
495	$cb->() unless $self->{autocork};	912	$cb->() unless $self->{autocork};
496		913
497	# if still data left in wbuf, we need to poll	914	# if still data left in wbuf, we need to poll
498	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	915	$self->{_ww} = AE::io $self->{fh}, 1, $cb
499	if length $self->{wbuf};	916	if length $self->{wbuf};
500	};	917	};
501	}	918	}
502		919
503	our %WH;	920	our %WH;
504		921
		922	# deprecated
505	sub register_write_type($$) {	923	sub register_write_type($$) {
506	$WH{$_[0]} = $_[1];	924	$WH{$_[0]} = $_[1];
507	}	925	}
508		926
509	sub push_write {	927	sub push_write {
510	my $self = shift;	928	my $self = shift;
511		929
512	if (@_ > 1) {	930	if (@_ > 1) {
513	my $type = shift;	931	my $type = shift;
514		932
		933	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
515	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	934	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
516	->($self, @_);	935	->($self, @_);
517	}	936	}
518		937
		938	# we downgrade here to avoid hard-to-track-down bugs,
		939	# and diagnose the problem earlier and better.
		940
519	if ($self->{filter_w}) {	941	if ($self->{tls}) {
520	$self->{filter_w}($self, \$_[0]);	942	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
		943	&_dotls ($self) if $self->{fh};
521	} else {	944	} else {
522	$self->{wbuf} .= $_[0];	945	utf8::downgrade $self->{wbuf} .= $_[0];
523	$self->_drain_wbuf;	946	$self->_drain_wbuf if $self->{fh};
524	}	947	}
525	}	948	}
526		949
527	=item $handle->push_write (type => @args)	950	=item $handle->push_write (type => @args)
528		951
529	Instead of formatting your data yourself, you can also let this module do	952	Instead of formatting your data yourself, you can also let this module
530	the job by specifying a type and type-specific arguments.	953	do the job by specifying a type and type-specific arguments. You
		954	can also specify the (fully qualified) name of a package, in which
		955	case AnyEvent tries to load the package and then expects to find the
		956	C<anyevent_write_type> function inside (see "custom write types", below).
531		957
532	Predefined types are (if you have ideas for additional types, feel free to	958	Predefined types are (if you have ideas for additional types, feel free to
533	drop by and tell us):	959	drop by and tell us):
534		960
535	=over 4	961	=over 4
…		…
542	=cut	968	=cut
543		969
544	register_write_type netstring => sub {	970	register_write_type netstring => sub {
545	my ($self, $string) = @_;	971	my ($self, $string) = @_;
546		972
547	sprintf "%d:%s,", (length $string), $string	973	(length $string) . ":$string,"
548	};	974	};
549		975
550	=item packstring => $format, $data	976	=item packstring => $format, $data
551		977
552	An octet string prefixed with an encoded length. The encoding C<$format>	978	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
592	Other languages could read single lines terminated by a newline and pass	1018	Other languages could read single lines terminated by a newline and pass
593	this line into their JSON decoder of choice.	1019	this line into their JSON decoder of choice.
594		1020
595	=cut	1021	=cut
596		1022
		1023	sub json_coder() {
		1024	eval { require JSON::XS; JSON::XS->new->utf8 }
		1025	|| do { require JSON; JSON->new->utf8 }
		1026	}
		1027
597	register_write_type json => sub {	1028	register_write_type json => sub {
598	my ($self, $ref) = @_;	1029	my ($self, $ref) = @_;
599		1030
600	require JSON;	1031	my $json = $self->{json} ||= json_coder;
601		1032
602	$self->{json} ? $self->{json}->encode ($ref)	1033	$json->encode ($ref)
603	: JSON::encode_json ($ref)
604	};	1034	};
605		1035
606	=item storable => $reference	1036	=item storable => $reference
607		1037
608	Freezes the given reference using L<Storable> and writes it to the	1038	Freezes the given reference using L<Storable> and writes it to the
…		…
618	pack "w/a*", Storable::nfreeze ($ref)	1048	pack "w/a*", Storable::nfreeze ($ref)
619	};	1049	};
620		1050
621	=back	1051	=back
622		1052
623	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1053	=item $handle->push_shutdown
624		1054
625	This function (not method) lets you add your own types to C<push_write>.	1055	Sometimes you know you want to close the socket after writing your data
		1056	before it was actually written. One way to do that is to replace your
		1057	C<on_drain> handler by a callback that shuts down the socket (and set
		1058	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1059	replaces the C<on_drain> callback with:
		1060
		1061	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1062
		1063	This simply shuts down the write side and signals an EOF condition to the
		1064	the peer.
		1065
		1066	You can rely on the normal read queue and C<on_eof> handling
		1067	afterwards. This is the cleanest way to close a connection.
		1068
		1069	This method may invoke callbacks (and therefore the handle might be
		1070	destroyed after it returns).
		1071
		1072	=cut
		1073
		1074	sub push_shutdown {
		1075	my ($self) = @_;
		1076
		1077	delete $self->{low_water_mark};
		1078	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1079	}
		1080
		1081	=item custom write types - Package::anyevent_write_type $handle, @args
		1082
		1083	Instead of one of the predefined types, you can also specify the name of
		1084	a package. AnyEvent will try to load the package and then expects to find
		1085	a function named C<anyevent_write_type> inside. If it isn't found, it
		1086	progressively tries to load the parent package until it either finds the
		1087	function (good) or runs out of packages (bad).
		1088
626	Whenever the given C<type> is used, C<push_write> will invoke the code	1089	Whenever the given C<type> is used, C<push_write> will the function with
627	reference with the handle object and the remaining arguments.	1090	the handle object and the remaining arguments.
628		1091
629	The code reference is supposed to return a single octet string that will	1092	The function is supposed to return a single octet string that will be
630	be appended to the write buffer.	1093	appended to the write buffer, so you cna mentally treat this function as a
		1094	"arguments to on-the-wire-format" converter.
631		1095
632	Note that this is a function, and all types registered this way will be	1096	Example: implement a custom write type C<join> that joins the remaining
633	global, so try to use unique names.	1097	arguments using the first one.
		1098
		1099	$handle->push_write (My::Type => " ", 1,2,3);
		1100
		1101	# uses the following package, which can be defined in the "My::Type" or in
		1102	# the "My" modules to be auto-loaded, or just about anywhere when the
		1103	# My::Type::anyevent_write_type is defined before invoking it.
		1104
		1105	package My::Type;
		1106
		1107	sub anyevent_write_type {
		1108	my ($handle, $delim, @args) = @_;
		1109
		1110	join $delim, @args
		1111	}
634		1112
635	=cut	1113	=cut
636		1114
637	#############################################################################	1115	#############################################################################
638		1116
…		…
647	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1125	ways, the "simple" way, using only C<on_read> and the "complex" way, using
648	a queue.	1126	a queue.
649		1127
650	In the simple case, you just install an C<on_read> callback and whenever	1128	In the simple case, you just install an C<on_read> callback and whenever
651	new data arrives, it will be called. You can then remove some data (if	1129	new data arrives, it will be called. You can then remove some data (if
652	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna	1130	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
653	leave the data there if you want to accumulate more (e.g. when only a	1131	leave the data there if you want to accumulate more (e.g. when only a
654	partial message has been received so far).	1132	partial message has been received so far), or change the read queue with
		1133	e.g. C<push_read>.
655		1134
656	In the more complex case, you want to queue multiple callbacks. In this	1135	In the more complex case, you want to queue multiple callbacks. In this
657	case, AnyEvent::Handle will call the first queued callback each time new	1136	case, AnyEvent::Handle will call the first queued callback each time new
658	data arrives (also the first time it is queued) and removes it when it has	1137	data arrives (also the first time it is queued) and remove it when it has
659	done its job (see C<push_read>, below).	1138	done its job (see C<push_read>, below).
660		1139
661	This way you can, for example, push three line-reads, followed by reading	1140	This way you can, for example, push three line-reads, followed by reading
662	a chunk of data, and AnyEvent::Handle will execute them in order.	1141	a chunk of data, and AnyEvent::Handle will execute them in order.
663		1142
…		…
720	=cut	1199	=cut
721		1200
722	sub _drain_rbuf {	1201	sub _drain_rbuf {
723	my ($self) = @_;	1202	my ($self) = @_;
724		1203
		1204	# avoid recursion
		1205	return if $self->{_skip_drain_rbuf};
725	local $self->{_in_drain} = 1;	1206	local $self->{_skip_drain_rbuf} = 1;
726
727	if (
728	defined $self->{rbuf_max}
729	&& $self->{rbuf_max} < length $self->{rbuf}
730	) {
731	return $self->_error (&Errno::ENOSPC, 1);
732	}
733		1207
734	while () {	1208	while () {
		1209	# we need to use a separate tls read buffer, as we must not receive data while
		1210	# we are draining the buffer, and this can only happen with TLS.
		1211	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1212	if exists $self->{_tls_rbuf};
		1213
735	my $len = length $self->{rbuf};	1214	my $len = length $self->{rbuf};
736		1215
737	if (my $cb = shift @{ $self->{_queue} }) {	1216	if (my $cb = shift @{ $self->{_queue} }) {
738	unless ($cb->($self)) {	1217	unless ($cb->($self)) {
739	if ($self->{_eof}) {	1218	# no progress can be made
740	# no progress can be made (not enough data and no data forthcoming)	1219	# (not enough data and no data forthcoming)
741	$self->_error (&Errno::EPIPE, 1), last;	1220	$self->_error (Errno::EPIPE, 1), return
742	}	1221	if $self->{_eof};
743		1222
744	unshift @{ $self->{_queue} }, $cb;	1223	unshift @{ $self->{_queue} }, $cb;
745	last;	1224	last;
746	}	1225	}
747	} elsif ($self->{on_read}) {	1226	} elsif ($self->{on_read}) {
…		…
754	&& !@{ $self->{_queue} } # and the queue is still empty	1233	&& !@{ $self->{_queue} } # and the queue is still empty
755	&& $self->{on_read} # but we still have on_read	1234	&& $self->{on_read} # but we still have on_read
756	) {	1235	) {
757	# no further data will arrive	1236	# no further data will arrive
758	# so no progress can be made	1237	# so no progress can be made
759	$self->_error (&Errno::EPIPE, 1), last	1238	$self->_error (Errno::EPIPE, 1), return
760	if $self->{_eof};	1239	if $self->{_eof};
761		1240
762	last; # more data might arrive	1241	last; # more data might arrive
763	}	1242	}
764	} else {	1243	} else {
765	# read side becomes idle	1244	# read side becomes idle
766	delete $self->{_rw};	1245	delete $self->{_rw} unless $self->{tls};
767	last;	1246	last;
768	}	1247	}
769	}	1248	}
770		1249
		1250	if ($self->{_eof}) {
		1251	$self->{on_eof}
771	$self->{on_eof}($self)	1252	? $self->{on_eof}($self)
772	if $self->{_eof} && $self->{on_eof};	1253	: $self->_error (0, 1, "Unexpected end-of-file");
		1254
		1255	return;
		1256	}
		1257
		1258	if (
		1259	defined $self->{rbuf_max}
		1260	&& $self->{rbuf_max} < length $self->{rbuf}
		1261	) {
		1262	$self->_error (Errno::ENOSPC, 1), return;
		1263	}
773		1264
774	# may need to restart read watcher	1265	# may need to restart read watcher
775	unless ($self->{_rw}) {	1266	unless ($self->{_rw}) {
776	$self->start_read	1267	$self->start_read
777	if $self->{on_read} || @{ $self->{_queue} };	1268	if $self->{on_read} || @{ $self->{_queue} };
…		…
782		1273
783	This replaces the currently set C<on_read> callback, or clears it (when	1274	This replaces the currently set C<on_read> callback, or clears it (when
784	the new callback is C<undef>). See the description of C<on_read> in the	1275	the new callback is C<undef>). See the description of C<on_read> in the
785	constructor.	1276	constructor.
786		1277
		1278	This method may invoke callbacks (and therefore the handle might be
		1279	destroyed after it returns).
		1280
787	=cut	1281	=cut
788		1282
789	sub on_read {	1283	sub on_read {
790	my ($self, $cb) = @_;	1284	my ($self, $cb) = @_;
791		1285
792	$self->{on_read} = $cb;	1286	$self->{on_read} = $cb;
793	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1287	$self->_drain_rbuf if $cb;
794	}	1288	}
795		1289
796	=item $handle->rbuf	1290	=item $handle->rbuf
797		1291
798	Returns the read buffer (as a modifiable lvalue).	1292	Returns the read buffer (as a modifiable lvalue). You can also access the
		1293	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1294	much faster, and no less clean).
799		1295
800	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1296	The only operation allowed on the read buffer (apart from looking at it)
801	you want.	1297	is removing data from its beginning. Otherwise modifying or appending to
		1298	it is not allowed and will lead to hard-to-track-down bugs.
802		1299
803	NOTE: The read buffer should only be used or modified if the C<on_read>,	1300	NOTE: The read buffer should only be used or modified in the C<on_read>
804	C<push_read> or C<unshift_read> methods are used. The other read methods	1301	callback or when C<push_read> or C<unshift_read> are used with a single
805	automatically manage the read buffer.	1302	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1303	will manage the read buffer on their own.
806		1304
807	=cut	1305	=cut
808		1306
809	sub rbuf : lvalue {	1307	sub rbuf : lvalue {
810	$_[0]{rbuf}	1308	$_[0]{rbuf}
…		…
827		1325
828	If enough data was available, then the callback must remove all data it is	1326	If enough data was available, then the callback must remove all data it is
829	interested in (which can be none at all) and return a true value. After returning	1327	interested in (which can be none at all) and return a true value. After returning
830	true, it will be removed from the queue.	1328	true, it will be removed from the queue.
831		1329
		1330	These methods may invoke callbacks (and therefore the handle might be
		1331	destroyed after it returns).
		1332
832	=cut	1333	=cut
833		1334
834	our %RH;	1335	our %RH;
835		1336
836	sub register_read_type($$) {	1337	sub register_read_type($$) {
…		…
842	my $cb = pop;	1343	my $cb = pop;
843		1344
844	if (@_) {	1345	if (@_) {
845	my $type = shift;	1346	my $type = shift;
846		1347
		1348	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
847	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1349	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
848	->($self, $cb, @_);	1350	->($self, $cb, @_);
849	}	1351	}
850		1352
851	push @{ $self->{_queue} }, $cb;	1353	push @{ $self->{_queue} }, $cb;
852	$self->_drain_rbuf unless $self->{_in_drain};	1354	$self->_drain_rbuf;
853	}	1355	}
854		1356
855	sub unshift_read {	1357	sub unshift_read {
856	my $self = shift;	1358	my $self = shift;
857	my $cb = pop;	1359	my $cb = pop;
858		1360
859	if (@_) {	1361	if (@_) {
860	my $type = shift;	1362	my $type = shift;
861		1363
		1364	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
862	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1365	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
863	->($self, $cb, @_);	1366	->($self, $cb, @_);
864	}	1367	}
865		1368
866
867	unshift @{ $self->{_queue} }, $cb;	1369	unshift @{ $self->{_queue} }, $cb;
868	$self->_drain_rbuf unless $self->{_in_drain};	1370	$self->_drain_rbuf;
869	}	1371	}
870		1372
871	=item $handle->push_read (type => @args, $cb)	1373	=item $handle->push_read (type => @args, $cb)
872		1374
873	=item $handle->unshift_read (type => @args, $cb)	1375	=item $handle->unshift_read (type => @args, $cb)
874		1376
875	Instead of providing a callback that parses the data itself you can chose	1377	Instead of providing a callback that parses the data itself you can chose
876	between a number of predefined parsing formats, for chunks of data, lines	1378	between a number of predefined parsing formats, for chunks of data, lines
877	etc.	1379	etc. You can also specify the (fully qualified) name of a package, in
		1380	which case AnyEvent tries to load the package and then expects to find the
		1381	C<anyevent_read_type> function inside (see "custom read types", below).
878		1382
879	Predefined types are (if you have ideas for additional types, feel free to	1383	Predefined types are (if you have ideas for additional types, feel free to
880	drop by and tell us):	1384	drop by and tell us):
881		1385
882	=over 4	1386	=over 4
…		…
974	the receive buffer when neither C<$accept> nor C<$reject> match,	1478	the receive buffer when neither C<$accept> nor C<$reject> match,
975	and everything preceding and including the match will be accepted	1479	and everything preceding and including the match will be accepted
976	unconditionally. This is useful to skip large amounts of data that you	1480	unconditionally. This is useful to skip large amounts of data that you
977	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1481	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
978	have to start matching from the beginning. This is purely an optimisation	1482	have to start matching from the beginning. This is purely an optimisation
979	and is usually worth only when you expect more than a few kilobytes.	1483	and is usually worth it only when you expect more than a few kilobytes.
980		1484
981	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1485	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
982	expect the header to be very large (it isn't in practise, but...), we use	1486	expect the header to be very large (it isn't in practice, but...), we use
983	a skip regex to skip initial portions. The skip regex is tricky in that	1487	a skip regex to skip initial portions. The skip regex is tricky in that
984	it only accepts something not ending in either \015 or \012, as these are	1488	it only accepts something not ending in either \015 or \012, as these are
985	required for the accept regex.	1489	required for the accept regex.
986		1490
987	$handle->push_read (regex =>	1491	$handle->push_read (regex =>
…		…
1006	return 1;	1510	return 1;
1007	}	1511	}
1008		1512
1009	# reject	1513	# reject
1010	if ($reject && $$rbuf =~ $reject) {	1514	if ($reject && $$rbuf =~ $reject) {
1011	$self->_error (&Errno::EBADMSG);	1515	$self->_error (Errno::EBADMSG);
1012	}	1516	}
1013		1517
1014	# skip	1518	# skip
1015	if ($skip && $$rbuf =~ $skip) {	1519	if ($skip && $$rbuf =~ $skip) {
1016	$data .= substr $$rbuf, 0, $+[0], "";	1520	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1032	my ($self, $cb) = @_;	1536	my ($self, $cb) = @_;
1033		1537
1034	sub {	1538	sub {
1035	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1539	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1036	if ($_[0]{rbuf} =~ /[^0-9]/) {	1540	if ($_[0]{rbuf} =~ /[^0-9]/) {
1037	$self->_error (&Errno::EBADMSG);	1541	$self->_error (Errno::EBADMSG);
1038	}	1542	}
1039	return;	1543	return;
1040	}	1544	}
1041		1545
1042	my $len = $1;	1546	my $len = $1;
…		…
1045	my $string = $_[1];	1549	my $string = $_[1];
1046	$_[0]->unshift_read (chunk => 1, sub {	1550	$_[0]->unshift_read (chunk => 1, sub {
1047	if ($_[1] eq ",") {	1551	if ($_[1] eq ",") {
1048	$cb->($_[0], $string);	1552	$cb->($_[0], $string);
1049	} else {	1553	} else {
1050	$self->_error (&Errno::EBADMSG);	1554	$self->_error (Errno::EBADMSG);
1051	}	1555	}
1052	});	1556	});
1053	});	1557	});
1054		1558
1055	1	1559	1
…		…
1061	An octet string prefixed with an encoded length. The encoding C<$format>	1565	An octet string prefixed with an encoded length. The encoding C<$format>
1062	uses the same format as a Perl C<pack> format, but must specify a single	1566	uses the same format as a Perl C<pack> format, but must specify a single
1063	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1567	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1064	optional C<!>, C<< < >> or C<< > >> modifier).	1568	optional C<!>, C<< < >> or C<< > >> modifier).
1065		1569
1066	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1570	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1571	EPP uses a prefix of C<N> (4 octtes).
1067		1572
1068	Example: read a block of data prefixed by its length in BER-encoded	1573	Example: read a block of data prefixed by its length in BER-encoded
1069	format (very efficient).	1574	format (very efficient).
1070		1575
1071	$handle->push_read (packstring => "w", sub {	1576	$handle->push_read (packstring => "w", sub {
…		…
1101	}	1606	}
1102	};	1607	};
1103		1608
1104	=item json => $cb->($handle, $hash_or_arrayref)	1609	=item json => $cb->($handle, $hash_or_arrayref)
1105		1610
1106	Reads a JSON object or array, decodes it and passes it to the callback.	1611	Reads a JSON object or array, decodes it and passes it to the
		1612	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1107		1613
1108	If a C<json> object was passed to the constructor, then that will be used	1614	If a C<json> object was passed to the constructor, then that will be used
1109	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1615	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1110		1616
1111	This read type uses the incremental parser available with JSON version	1617	This read type uses the incremental parser available with JSON version
…		…
1120	=cut	1626	=cut
1121		1627
1122	register_read_type json => sub {	1628	register_read_type json => sub {
1123	my ($self, $cb) = @_;	1629	my ($self, $cb) = @_;
1124		1630
1125	require JSON;	1631	my $json = $self->{json} ||= json_coder;
1126		1632
1127	my $data;	1633	my $data;
1128	my $rbuf = \$self->{rbuf};	1634	my $rbuf = \$self->{rbuf};
1129		1635
1130	my $json = $self->{json} ||= JSON->new->utf8;
1131
1132	sub {	1636	sub {
1133	my $ref = $json->incr_parse ($self->{rbuf});	1637	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1134		1638
1135	if ($ref) {	1639	if ($ref) {
1136	$self->{rbuf} = $json->incr_text;	1640	$self->{rbuf} = $json->incr_text;
1137	$json->incr_text = "";	1641	$json->incr_text = "";
1138	$cb->($self, $ref);	1642	$cb->($self, $ref);
1139		1643
1140	1	1644	1
		1645	} elsif ($@) {
		1646	# error case
		1647	$json->incr_skip;
		1648
		1649	$self->{rbuf} = $json->incr_text;
		1650	$json->incr_text = "";
		1651
		1652	$self->_error (Errno::EBADMSG);
		1653
		1654	()
1141	} else {	1655	} else {
1142	$self->{rbuf} = "";	1656	$self->{rbuf} = "";
		1657
1143	()	1658	()
1144	}	1659	}
1145	}	1660	}
1146	};	1661	};
1147		1662
…		…
1179	# read remaining chunk	1694	# read remaining chunk
1180	$_[0]->unshift_read (chunk => $len, sub {	1695	$_[0]->unshift_read (chunk => $len, sub {
1181	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1696	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1182	$cb->($_[0], $ref);	1697	$cb->($_[0], $ref);
1183	} else {	1698	} else {
1184	$self->_error (&Errno::EBADMSG);	1699	$self->_error (Errno::EBADMSG);
1185	}	1700	}
1186	});	1701	});
1187	}	1702	}
1188		1703
1189	1	1704	1
1190	}	1705	}
1191	};	1706	};
1192		1707
1193	=back	1708	=back
1194		1709
1195	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1710	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1196		1711
1197	This function (not method) lets you add your own types to C<push_read>.	1712	Instead of one of the predefined types, you can also specify the name
		1713	of a package. AnyEvent will try to load the package and then expects to
		1714	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1715	progressively tries to load the parent package until it either finds the
		1716	function (good) or runs out of packages (bad).
1198		1717
1199	Whenever the given C<type> is used, C<push_read> will invoke the code	1718	Whenever this type is used, C<push_read> will invoke the function with the
1200	reference with the handle object, the callback and the remaining	1719	handle object, the original callback and the remaining arguments.
1201	arguments.
1202		1720
1203	The code reference is supposed to return a callback (usually a closure)	1721	The function is supposed to return a callback (usually a closure) that
1204	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1722	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1723	mentally treat the function as a "configurable read type to read callback"
		1724	converter.
1205		1725
1206	It should invoke the passed callback when it is done reading (remember to	1726	It should invoke the original callback when it is done reading (remember
1207	pass C<$handle> as first argument as all other callbacks do that).	1727	to pass C<$handle> as first argument as all other callbacks do that,
		1728	although there is no strict requirement on this).
1208		1729
1209	Note that this is a function, and all types registered this way will be
1210	global, so try to use unique names.
1211
1212	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1730	For examples, see the source of this module (F<perldoc -m
1213	search for C<register_read_type>)).	1731	AnyEvent::Handle>, search for C<register_read_type>)).
1214		1732
1215	=item $handle->stop_read	1733	=item $handle->stop_read
1216		1734
1217	=item $handle->start_read	1735	=item $handle->start_read
1218		1736
…		…
1224	Note that AnyEvent::Handle will automatically C<start_read> for you when	1742	Note that AnyEvent::Handle will automatically C<start_read> for you when
1225	you change the C<on_read> callback or push/unshift a read callback, and it	1743	you change the C<on_read> callback or push/unshift a read callback, and it
1226	will automatically C<stop_read> for you when neither C<on_read> is set nor	1744	will automatically C<stop_read> for you when neither C<on_read> is set nor
1227	there are any read requests in the queue.	1745	there are any read requests in the queue.
1228		1746
		1747	These methods will have no effect when in TLS mode (as TLS doesn't support
		1748	half-duplex connections).
		1749
1229	=cut	1750	=cut
1230		1751
1231	sub stop_read {	1752	sub stop_read {
1232	my ($self) = @_;	1753	my ($self) = @_;
1233		1754
1234	delete $self->{_rw};	1755	delete $self->{_rw} unless $self->{tls};
1235	}	1756	}
1236		1757
1237	sub start_read {	1758	sub start_read {
1238	my ($self) = @_;	1759	my ($self) = @_;
1239		1760
1240	unless ($self->{_rw} || $self->{_eof}) {	1761	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1241	Scalar::Util::weaken $self;	1762	Scalar::Util::weaken $self;
1242		1763
1243	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1764	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1244	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1765	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1245	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1766	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1246		1767
1247	if ($len > 0) {	1768	if ($len > 0) {
1248	$self->{_activity} = AnyEvent->now;	1769	$self->{_activity} = $self->{_ractivity} = AE::now;
1249		1770
1250	$self->{filter_r}	1771	if ($self->{tls}) {
1251	? $self->{filter_r}($self, $rbuf)	1772	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1252	: $self->{_in_drain} || $self->_drain_rbuf;	1773
		1774	&_dotls ($self);
		1775	} else {
		1776	$self->_drain_rbuf;
		1777	}
		1778
		1779	if ($len == $self->{read_size}) {
		1780	$self->{read_size} *= 2;
		1781	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		1782	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		1783	}
1253		1784
1254	} elsif (defined $len) {	1785	} elsif (defined $len) {
1255	delete $self->{_rw};	1786	delete $self->{_rw};
1256	$self->{_eof} = 1;	1787	$self->{_eof} = 1;
1257	$self->_drain_rbuf unless $self->{_in_drain};	1788	$self->_drain_rbuf;
1258		1789
1259	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1790	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1260	return $self->_error ($!, 1);	1791	return $self->_error ($!, 1);
1261	}	1792	}
1262	});	1793	};
1263	}	1794	}
1264	}	1795	}
1265		1796
		1797	our $ERROR_SYSCALL;
		1798	our $ERROR_WANT_READ;
		1799
		1800	sub _tls_error {
		1801	my ($self, $err) = @_;
		1802
		1803	return $self->_error ($!, 1)
		1804	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1805
		1806	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1807
		1808	# reduce error string to look less scary
		1809	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1810
		1811	if ($self->{_on_starttls}) {
		1812	(delete $self->{_on_starttls})->($self, undef, $err);
		1813	&_freetls;
		1814	} else {
		1815	&_freetls;
		1816	$self->_error (Errno::EPROTO, 1, $err);
		1817	}
		1818	}
		1819
		1820	# poll the write BIO and send the data if applicable
		1821	# also decode read data if possible
		1822	# this is basiclaly our TLS state machine
		1823	# more efficient implementations are possible with openssl,
		1824	# but not with the buggy and incomplete Net::SSLeay.
1266	sub _dotls {	1825	sub _dotls {
1267	my ($self) = @_;	1826	my ($self) = @_;
1268		1827
1269	my $buf;	1828	my $tmp;
1270		1829
1271	if (length $self->{_tls_wbuf}) {	1830	if (length $self->{_tls_wbuf}) {
1272	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1831	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1273	substr $self->{_tls_wbuf}, 0, $len, "";	1832	substr $self->{_tls_wbuf}, 0, $tmp, "";
1274	}	1833	}
1275	}
1276		1834
		1835	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1836	return $self->_tls_error ($tmp)
		1837	if $tmp != $ERROR_WANT_READ
		1838	&& ($tmp != $ERROR_SYSCALL || $!);
		1839	}
		1840
		1841	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1842	unless (length $tmp) {
		1843	$self->{_on_starttls}
		1844	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1845	&_freetls;
		1846
		1847	if ($self->{on_stoptls}) {
		1848	$self->{on_stoptls}($self);
		1849	return;
		1850	} else {
		1851	# let's treat SSL-eof as we treat normal EOF
		1852	delete $self->{_rw};
		1853	$self->{_eof} = 1;
		1854	}
		1855	}
		1856
		1857	$self->{_tls_rbuf} .= $tmp;
		1858	$self->_drain_rbuf;
		1859	$self->{tls} or return; # tls session might have gone away in callback
		1860	}
		1861
		1862	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1863	return $self->_tls_error ($tmp)
		1864	if $tmp != $ERROR_WANT_READ
		1865	&& ($tmp != $ERROR_SYSCALL || $!);
		1866
1277	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1867	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1278	$self->{wbuf} .= $buf;	1868	$self->{wbuf} .= $tmp;
1279	$self->_drain_wbuf;	1869	$self->_drain_wbuf;
		1870	$self->{tls} or return; # tls session might have gone away in callback
1280	}	1871	}
1281		1872
1282	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1873	$self->{_on_starttls}
1283	if (length $buf) {	1874	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1284	$self->{rbuf} .= $buf;	1875	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1285	$self->_drain_rbuf unless $self->{_in_drain};
1286	} else {
1287	# let's treat SSL-eof as we treat normal EOF
1288	$self->{_eof} = 1;
1289	$self->_shutdown;
1290	return;
1291	}
1292	}
1293
1294	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1295
1296	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1297	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1298	return $self->_error ($!, 1);
1299	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1300	return $self->_error (&Errno::EIO, 1);
1301	}
1302
1303	# all others are fine for our purposes
1304	}
1305	}	1876	}
1306		1877
1307	=item $handle->starttls ($tls[, $tls_ctx])	1878	=item $handle->starttls ($tls[, $tls_ctx])
1308		1879
1309	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1880	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1310	object is created, you can also do that at a later time by calling	1881	object is created, you can also do that at a later time by calling
1311	C<starttls>.	1882	C<starttls>.
1312		1883
		1884	Starting TLS is currently an asynchronous operation - when you push some
		1885	write data and then call C<< ->starttls >> then TLS negotiation will start
		1886	immediately, after which the queued write data is then sent.
		1887
1313	The first argument is the same as the C<tls> constructor argument (either	1888	The first argument is the same as the C<tls> constructor argument (either
1314	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1889	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1315		1890
1316	The second argument is the optional C<Net::SSLeay::CTX> object that is	1891	The second argument is the optional C<AnyEvent::TLS> object that is used
1317	used when AnyEvent::Handle has to create its own TLS connection object.	1892	when AnyEvent::Handle has to create its own TLS connection object, or
		1893	a hash reference with C<< key => value >> pairs that will be used to
		1894	construct a new context.
1318		1895
1319	The TLS connection object will end up in C<< $handle->{tls} >> after this	1896	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1320	call and can be used or changed to your liking. Note that the handshake	1897	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1321	might have already started when this function returns.	1898	changed to your liking. Note that the handshake might have already started
		1899	when this function returns.
1322		1900
		1901	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1902	handshakes on the same stream. It is best to not attempt to use the
		1903	stream after stopping TLS.
		1904
		1905	This method may invoke callbacks (and therefore the handle might be
		1906	destroyed after it returns).
		1907
1323	=cut	1908	=cut
		1909
		1910	our %TLS_CACHE; #TODO not yet documented, should we?
1324		1911
1325	sub starttls {	1912	sub starttls {
1326	my ($self, $ssl, $ctx) = @_;	1913	my ($self, $tls, $ctx) = @_;
1327		1914
1328	$self->stoptls;	1915	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1916	if $self->{tls};
1329		1917
1330	if ($ssl eq "accept") {	1918	$self->{tls} = $tls;
1331	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1919	$self->{tls_ctx} = $ctx if @_ > 2;
1332	Net::SSLeay::set_accept_state ($ssl);	1920
1333	} elsif ($ssl eq "connect") {	1921	return unless $self->{fh};
1334	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1922
1335	Net::SSLeay::set_connect_state ($ssl);	1923	require Net::SSLeay;
		1924
		1925	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1926	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1927
		1928	$tls = delete $self->{tls};
		1929	$ctx = $self->{tls_ctx};
		1930
		1931	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1932
		1933	if ("HASH" eq ref $ctx) {
		1934	require AnyEvent::TLS;
		1935
		1936	if ($ctx->{cache}) {
		1937	my $key = $ctx+0;
		1938	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1939	} else {
		1940	$ctx = new AnyEvent::TLS %$ctx;
		1941	}
		1942	}
1336	}	1943
1337		1944	$self->{tls_ctx} = $ctx || TLS_CTX ();
1338	$self->{tls} = $ssl;	1945	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1339		1946
1340	# basically, this is deep magic (because SSL_read should have the same issues)	1947	# basically, this is deep magic (because SSL_read should have the same issues)
1341	# but the openssl maintainers basically said: "trust us, it just works".	1948	# but the openssl maintainers basically said: "trust us, it just works".
1342	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1949	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1343	# and mismaintained ssleay-module doesn't even offer them).	1950	# and mismaintained ssleay-module doesn't even offer them).
1344	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1951	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1952	#
		1953	# in short: this is a mess.
		1954	#
		1955	# note that we do not try to keep the length constant between writes as we are required to do.
		1956	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1957	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1958	# have identity issues in that area.
1345	Net::SSLeay::CTX_set_mode ($self->{tls},	1959	# Net::SSLeay::CTX_set_mode ($ssl,
1346	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1960	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1347	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1961	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1962	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1348		1963
1349	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1964	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1350	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1965	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1351		1966
		1967	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1968
1352	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1969	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1353		1970
1354	$self->{filter_w} = sub {	1971	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1355	$_[0]{_tls_wbuf} .= ${$_[1]};	1972	if $self->{on_starttls};
1356	&_dotls;	1973
1357	};	1974	&_dotls; # need to trigger the initial handshake
1358	$self->{filter_r} = sub {	1975	$self->start_read; # make sure we actually do read
1359	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1360	&_dotls;
1361	};
1362	}	1976	}
1363		1977
1364	=item $handle->stoptls	1978	=item $handle->stoptls
1365		1979
1366	Destroys the SSL connection, if any. Partial read or write data will be	1980	Shuts down the SSL connection - this makes a proper EOF handshake by
1367	lost.	1981	sending a close notify to the other side, but since OpenSSL doesn't
		1982	support non-blocking shut downs, it is not guaranteed that you can re-use
		1983	the stream afterwards.
		1984
		1985	This method may invoke callbacks (and therefore the handle might be
		1986	destroyed after it returns).
1368		1987
1369	=cut	1988	=cut
1370		1989
1371	sub stoptls {	1990	sub stoptls {
1372	my ($self) = @_;	1991	my ($self) = @_;
1373		1992
1374	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1993	if ($self->{tls} && $self->{fh}) {
		1994	Net::SSLeay::shutdown ($self->{tls});
1375		1995
1376	delete $self->{_rbio};	1996	&_dotls;
1377	delete $self->{_wbio};	1997
1378	delete $self->{_tls_wbuf};	1998	# # we don't give a shit. no, we do, but we can't. no...#d#
1379	delete $self->{filter_r};	1999	# # we, we... have to use openssl :/#d#
1380	delete $self->{filter_w};	2000	# &_freetls;#d#
		2001	}
		2002	}
		2003
		2004	sub _freetls {
		2005	my ($self) = @_;
		2006
		2007	return unless $self->{tls};
		2008
		2009	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2010	if $self->{tls} > 0;
		2011
		2012	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1381	}	2013	}
1382		2014
1383	sub DESTROY {	2015	sub DESTROY {
1384	my $self = shift;	2016	my ($self) = @_;
1385		2017
1386	$self->stoptls;	2018	&_freetls;
1387		2019
1388	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2020	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1389		2021
1390	if ($linger && length $self->{wbuf}) {	2022	if ($linger && length $self->{wbuf} && $self->{fh}) {
1391	my $fh = delete $self->{fh};	2023	my $fh = delete $self->{fh};
1392	my $wbuf = delete $self->{wbuf};	2024	my $wbuf = delete $self->{wbuf};
1393		2025
1394	my @linger;	2026	my @linger;
1395		2027
1396	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2028	push @linger, AE::io $fh, 1, sub {
1397	my $len = syswrite $fh, $wbuf, length $wbuf;	2029	my $len = syswrite $fh, $wbuf, length $wbuf;
1398		2030
1399	if ($len > 0) {	2031	if ($len > 0) {
1400	substr $wbuf, 0, $len, "";	2032	substr $wbuf, 0, $len, "";
1401	} else {	2033	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK)) {
1402	@linger = (); # end	2034	@linger = (); # end
1403	}	2035	}
1404	});	2036	};
1405	push @linger, AnyEvent->timer (after => $linger, cb => sub {	2037	push @linger, AE::timer $linger, 0, sub {
1406	@linger = ();	2038	@linger = ();
1407	});	2039	};
1408	}	2040	}
1409	}	2041	}
		2042
		2043	=item $handle->destroy
		2044
		2045	Shuts down the handle object as much as possible - this call ensures that
		2046	no further callbacks will be invoked and as many resources as possible
		2047	will be freed. Any method you will call on the handle object after
		2048	destroying it in this way will be silently ignored (and it will return the
		2049	empty list).
		2050
		2051	Normally, you can just "forget" any references to an AnyEvent::Handle
		2052	object and it will simply shut down. This works in fatal error and EOF
		2053	callbacks, as well as code outside. It does I<NOT> work in a read or write
		2054	callback, so when you want to destroy the AnyEvent::Handle object from
		2055	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		2056	that case.
		2057
		2058	Destroying the handle object in this way has the advantage that callbacks
		2059	will be removed as well, so if those are the only reference holders (as
		2060	is common), then one doesn't need to do anything special to break any
		2061	reference cycles.
		2062
		2063	The handle might still linger in the background and write out remaining
		2064	data, as specified by the C<linger> option, however.
		2065
		2066	=cut
		2067
		2068	sub destroy {
		2069	my ($self) = @_;
		2070
		2071	$self->DESTROY;
		2072	%$self = ();
		2073	bless $self, "AnyEvent::Handle::destroyed";
		2074	}
		2075
		2076	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2077	#nop
		2078	}
		2079
		2080	=item $handle->destroyed
		2081
		2082	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2083	->destroy >>, true otherwise.
		2084
		2085	Can be useful to decide whether the handle is still valid after some
		2086	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2087	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2088	can destroy the handle, so work can be avoided by checking sometimes:
		2089
		2090	$hdl->starttls ("accept");
		2091	return if $hdl->destroyed;
		2092	$hdl->push_write (...
		2093
		2094	Note that the call to C<push_write> will silently be ignored if the handle
		2095	has been destroyed, so often you can just ignore the possibility of the
		2096	handle being destroyed.
		2097
		2098	=cut
		2099
		2100	sub destroyed { 0 }
		2101	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1410		2102
1411	=item AnyEvent::Handle::TLS_CTX	2103	=item AnyEvent::Handle::TLS_CTX
1412		2104
1413	This function creates and returns the Net::SSLeay::CTX object used by	2105	This function creates and returns the AnyEvent::TLS object used by default
1414	default for TLS mode.	2106	for TLS mode.
1415		2107
1416	The context is created like this:	2108	The context is created by calling L<AnyEvent::TLS> without any arguments.
1417
1418	Net::SSLeay::load_error_strings;
1419	Net::SSLeay::SSLeay_add_ssl_algorithms;
1420	Net::SSLeay::randomize;
1421
1422	my $CTX = Net::SSLeay::CTX_new;
1423
1424	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1425		2109
1426	=cut	2110	=cut
1427		2111
1428	our $TLS_CTX;	2112	our $TLS_CTX;
1429		2113
1430	sub TLS_CTX() {	2114	sub TLS_CTX() {
1431	$TLS_CTX || do {	2115	$TLS_CTX ||= do {
1432	require Net::SSLeay;	2116	require AnyEvent::TLS;
1433		2117
1434	Net::SSLeay::load_error_strings ();	2118	new AnyEvent::TLS
1435	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1436	Net::SSLeay::randomize ();
1437
1438	$TLS_CTX = Net::SSLeay::CTX_new ();
1439
1440	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1441
1442	$TLS_CTX
1443	}	2119	}
1444	}	2120	}
1445		2121
1446	=back	2122	=back
		2123
		2124
		2125	=head1 NONFREQUENTLY ASKED QUESTIONS
		2126
		2127	=over 4
		2128
		2129	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2130	still get further invocations!
		2131
		2132	That's because AnyEvent::Handle keeps a reference to itself when handling
		2133	read or write callbacks.
		2134
		2135	It is only safe to "forget" the reference inside EOF or error callbacks,
		2136	from within all other callbacks, you need to explicitly call the C<<
		2137	->destroy >> method.
		2138
		2139	=item I get different callback invocations in TLS mode/Why can't I pause
		2140	reading?
		2141
		2142	Unlike, say, TCP, TLS connections do not consist of two independent
		2143	communication channels, one for each direction. Or put differently, the
		2144	read and write directions are not independent of each other: you cannot
		2145	write data unless you are also prepared to read, and vice versa.
		2146
		2147	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
		2148	callback invocations when you are not expecting any read data - the reason
		2149	is that AnyEvent::Handle always reads in TLS mode.
		2150
		2151	During the connection, you have to make sure that you always have a
		2152	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2153	connection (or when you no longer want to use it) you can call the
		2154	C<destroy> method.
		2155
		2156	=item How do I read data until the other side closes the connection?
		2157
		2158	If you just want to read your data into a perl scalar, the easiest way
		2159	to achieve this is by setting an C<on_read> callback that does nothing,
		2160	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2161	will be in C<$_[0]{rbuf}>:
		2162
		2163	$handle->on_read (sub { });
		2164	$handle->on_eof (undef);
		2165	$handle->on_error (sub {
		2166	my $data = delete $_[0]{rbuf};
		2167	});
		2168
		2169	The reason to use C<on_error> is that TCP connections, due to latencies
		2170	and packets loss, might get closed quite violently with an error, when in
		2171	fact all data has been received.
		2172
		2173	It is usually better to use acknowledgements when transferring data,
		2174	to make sure the other side hasn't just died and you got the data
		2175	intact. This is also one reason why so many internet protocols have an
		2176	explicit QUIT command.
		2177
		2178	=item I don't want to destroy the handle too early - how do I wait until
		2179	all data has been written?
		2180
		2181	After writing your last bits of data, set the C<on_drain> callback
		2182	and destroy the handle in there - with the default setting of
		2183	C<low_water_mark> this will be called precisely when all data has been
		2184	written to the socket:
		2185
		2186	$handle->push_write (...);
		2187	$handle->on_drain (sub {
		2188	warn "all data submitted to the kernel\n";
		2189	undef $handle;
		2190	});
		2191
		2192	If you just want to queue some data and then signal EOF to the other side,
		2193	consider using C<< ->push_shutdown >> instead.
		2194
		2195	=item I want to contact a TLS/SSL server, I don't care about security.
		2196
		2197	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2198	connect to it and then create the AnyEvent::Handle with the C<tls>
		2199	parameter:
		2200
		2201	tcp_connect $host, $port, sub {
		2202	my ($fh) = @_;
		2203
		2204	my $handle = new AnyEvent::Handle
		2205	fh => $fh,
		2206	tls => "connect",
		2207	on_error => sub { ... };
		2208
		2209	$handle->push_write (...);
		2210	};
		2211
		2212	=item I want to contact a TLS/SSL server, I do care about security.
		2213
		2214	Then you should additionally enable certificate verification, including
		2215	peername verification, if the protocol you use supports it (see
		2216	L<AnyEvent::TLS>, C<verify_peername>).
		2217
		2218	E.g. for HTTPS:
		2219
		2220	tcp_connect $host, $port, sub {
		2221	my ($fh) = @_;
		2222
		2223	my $handle = new AnyEvent::Handle
		2224	fh => $fh,
		2225	peername => $host,
		2226	tls => "connect",
		2227	tls_ctx => { verify => 1, verify_peername => "https" },
		2228	...
		2229
		2230	Note that you must specify the hostname you connected to (or whatever
		2231	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2232	peername verification will be done.
		2233
		2234	The above will use the system-dependent default set of trusted CA
		2235	certificates. If you want to check against a specific CA, add the
		2236	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2237
		2238	tls_ctx => {
		2239	verify => 1,
		2240	verify_peername => "https",
		2241	ca_file => "my-ca-cert.pem",
		2242	},
		2243
		2244	=item I want to create a TLS/SSL server, how do I do that?
		2245
		2246	Well, you first need to get a server certificate and key. You have
		2247	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2248	self-signed certificate (cheap. check the search engine of your choice,
		2249	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2250	nice program for that purpose).
		2251
		2252	Then create a file with your private key (in PEM format, see
		2253	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2254	file should then look like this:
		2255
		2256	-----BEGIN RSA PRIVATE KEY-----
		2257	...header data
		2258	... lots of base64'y-stuff
		2259	-----END RSA PRIVATE KEY-----
		2260
		2261	-----BEGIN CERTIFICATE-----
		2262	... lots of base64'y-stuff
		2263	-----END CERTIFICATE-----
		2264
		2265	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2266	specify this file as C<cert_file>:
		2267
		2268	tcp_server undef, $port, sub {
		2269	my ($fh) = @_;
		2270
		2271	my $handle = new AnyEvent::Handle
		2272	fh => $fh,
		2273	tls => "accept",
		2274	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2275	...
		2276
		2277	When you have intermediate CA certificates that your clients might not
		2278	know about, just append them to the C<cert_file>.
		2279
		2280	=back
		2281
1447		2282
1448	=head1 SUBCLASSING AnyEvent::Handle	2283	=head1 SUBCLASSING AnyEvent::Handle
1449		2284
1450	In many cases, you might want to subclass AnyEvent::Handle.	2285	In many cases, you might want to subclass AnyEvent::Handle.
1451		2286
…		…
1468		2303
1469	=item * all members not documented here and not prefixed with an underscore	2304	=item * all members not documented here and not prefixed with an underscore
1470	are free to use in subclasses.	2305	are free to use in subclasses.
1471		2306
1472	Of course, new versions of AnyEvent::Handle may introduce more "public"	2307	Of course, new versions of AnyEvent::Handle may introduce more "public"
1473	member variables, but thats just life, at least it is documented.	2308	member variables, but that's just life. At least it is documented.
1474		2309
1475	=back	2310	=back
1476		2311
1477	=head1 AUTHOR	2312	=head1 AUTHOR
1478		2313

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines