ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.88 by root, Thu Aug 21 23:48:35 2008 UTC vs.
Revision 1.240 by root, Tue Dec 17 16:43:15 2013 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.233;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	AE::log error => $msg;
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	say "got line <$line>";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes, and other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, where the documentation refers to "bytes", it means
58	means characters. As sysread and syswrite are used for all I/O, their	42	characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
60		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
		80	sub MAX_READ_SIZE() { 131072 }
		81
64	=head1 METHODS	82	=head1 METHODS
65		83
66	=over 4	84	=over 4
67		85
68	=item B<new (%args)>	86	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
69		87
70	The constructor supports these arguments (all as key => value pairs).	88	The constructor supports these arguments (all as C<< key => value >> pairs).
71		89
72	=over 4	90	=over 4
73		91
74	=item fh => $filehandle [MANDATORY]	92	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
75		93
76	The filehandle this L<AnyEvent::Handle> object will operate on.	94	The filehandle this L<AnyEvent::Handle> object will operate on.
77
78	NOTE: The filehandle will be set to non-blocking mode (using	95	NOTE: The filehandle will be set to non-blocking mode (using
79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	96	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
80	that mode.	97	that mode.
81		98
		99	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		100
		101	Try to connect to the specified host and service (port), using
		102	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		103	default C<peername>.
		104
		105	You have to specify either this parameter, or C<fh>, above.
		106
		107	It is possible to push requests on the read and write queues, and modify
		108	properties of the stream, even while AnyEvent::Handle is connecting.
		109
		110	When this parameter is specified, then the C<on_prepare>,
		111	C<on_connect_error> and C<on_connect> callbacks will be called under the
		112	appropriate circumstances:
		113
		114	=over 4
		115
82	=item on_eof => $cb->($handle)	116	=item on_prepare => $cb->($handle)
83		117
84	Set the callback to be called when an end-of-file condition is detected,	118	This (rarely used) callback is called before a new connection is
85	i.e. in the case of a socket, when the other side has closed the	119	attempted, but after the file handle has been created (you can access that
86	connection cleanly.	120	file handle via C<< $handle->{fh} >>). It could be used to prepare the
		121	file handle with parameters required for the actual connect (as opposed to
		122	settings that can be changed when the connection is already established).
87		123
88	For sockets, this just means that the other side has stopped sending data,	124	The return value of this callback should be the connect timeout value in
89	you can still try to write data, and, in fact, one can return from the eof	125	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
90	callback and continue writing data, as only the read part has been shut	126	default timeout is to be used).
91	down.
92		127
93	While not mandatory, it is I<highly> recommended to set an eof callback,	128	=item on_connect => $cb->($handle, $host, $port, $retry->())
94	otherwise you might end up with a closed socket while you are still
95	waiting for data.
96		129
97	If an EOF condition has been detected but no C<on_eof> callback has been	130	This callback is called when a connection has been successfully established.
98	set, then a fatal error will be raised with C<$!> set to <0>.
99		131
		132	The peer's numeric host and port (the socket peername) are passed as
		133	parameters, together with a retry callback. At the time it is called the
		134	read and write queues, EOF status, TLS status and similar properties of
		135	the handle will have been reset.
		136
		137	It is not allowed to use the read or write queues while the handle object
		138	is connecting.
		139
		140	If, for some reason, the handle is not acceptable, calling C<$retry> will
		141	continue with the next connection target (in case of multi-homed hosts or
		142	SRV records there can be multiple connection endpoints). The C<$retry>
		143	callback can be invoked after the connect callback returns, i.e. one can
		144	start a handshake and then decide to retry with the next host if the
		145	handshake fails.
		146
		147	In most cases, you should ignore the C<$retry> parameter.
		148
		149	=item on_connect_error => $cb->($handle, $message)
		150
		151	This callback is called when the connection could not be
		152	established. C<$!> will contain the relevant error code, and C<$message> a
		153	message describing it (usually the same as C<"$!">).
		154
		155	If this callback isn't specified, then C<on_error> will be called with a
		156	fatal error instead.
		157
		158	=back
		159
100	=item on_error => $cb->($handle, $fatal)	160	=item on_error => $cb->($handle, $fatal, $message)
101		161
102	This is the error callback, which is called when, well, some error	162	This is the error callback, which is called when, well, some error
103	occured, such as not being able to resolve the hostname, failure to	163	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.	164	connect, or a read error.
105		165
106	Some errors are fatal (which is indicated by C<$fatal> being true). On	166	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable	167	fatal errors the handle object will be destroyed (by a call to C<< ->
108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal	168	destroy >>) after invoking the error callback (which means you are free to
109	errors are an EOF condition with active (but unsatisifable) read watchers	169	examine the handle object). Examples of fatal errors are an EOF condition
110	(C<EPIPE>) or I/O errors.	170	with active (but unsatisfiable) read watchers (C<EPIPE>) or I/O errors. In
		171	cases where the other side can close the connection at will, it is
		172	often easiest to not report C<EPIPE> errors in this callback.
111		173
		174	AnyEvent::Handle tries to find an appropriate error code for you to check
		175	against, but in some cases (TLS errors), this does not work well.
		176
		177	If you report the error to the user, it is recommended to always output
		178	the C<$message> argument in human-readable error messages (you don't need
		179	to report C<"$!"> if you report C<$message>).
		180
		181	If you want to react programmatically to the error, then looking at C<$!>
		182	and comparing it against some of the documented C<Errno> values is usually
		183	better than looking at the C<$message>.
		184
112	Non-fatal errors can be retried by simply returning, but it is recommended	185	Non-fatal errors can be retried by returning, but it is recommended
113	to simply ignore this parameter and instead abondon the handle object	186	to simply ignore this parameter and instead abondon the handle object
114	when this callback is invoked. Examples of non-fatal errors are timeouts	187	when this callback is invoked. Examples of non-fatal errors are timeouts
115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).	188	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
116		189
117	On callback entrance, the value of C<$!> contains the operating system	190	On entry to the callback, the value of C<$!> contains the operating
118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	191	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		192	C<EPROTO>).
119		193
120	While not mandatory, it is I<highly> recommended to set this callback, as	194	While not mandatory, it is I<highly> recommended to set this callback, as
121	you will not be notified of errors otherwise. The default simply calls	195	you will not be notified of errors otherwise. The default just calls
122	C<croak>.	196	C<croak>.
123		197
124	=item on_read => $cb->($handle)	198	=item on_read => $cb->($handle)
125		199
126	This sets the default read callback, which is called when data arrives	200	This sets the default read callback, which is called when data arrives
127	and no read request is in the queue (unlike read queue callbacks, this	201	and no read request is in the queue (unlike read queue callbacks, this
128	callback will only be called when at least one octet of data is in the	202	callback will only be called when at least one octet of data is in the
129	read buffer).	203	read buffer).
130		204
131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	205	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
132	method or access the C<$handle->{rbuf}> member directly.	206	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		207	must not enlarge or modify the read buffer, you can only remove data at
		208	the beginning from it.
133		209
		210	You can also call C<< ->push_read (...) >> or any other function that
		211	modifies the read queue. Or do both. Or ...
		212
134	When an EOF condition is detected then AnyEvent::Handle will first try to	213	When an EOF condition is detected, AnyEvent::Handle will first try to
135	feed all the remaining data to the queued callbacks and C<on_read> before	214	feed all the remaining data to the queued callbacks and C<on_read> before
136	calling the C<on_eof> callback. If no progress can be made, then a fatal	215	calling the C<on_eof> callback. If no progress can be made, then a fatal
137	error will be raised (with C<$!> set to C<EPIPE>).	216	error will be raised (with C<$!> set to C<EPIPE>).
138		217
		218	Note that, unlike requests in the read queue, an C<on_read> callback
		219	doesn't mean you I<require> some data: if there is an EOF and there
		220	are outstanding read requests then an error will be flagged. With an
		221	C<on_read> callback, the C<on_eof> callback will be invoked.
		222
		223	=item on_eof => $cb->($handle)
		224
		225	Set the callback to be called when an end-of-file condition is detected,
		226	i.e. in the case of a socket, when the other side has closed the
		227	connection cleanly, and there are no outstanding read requests in the
		228	queue (if there are read requests, then an EOF counts as an unexpected
		229	connection close and will be flagged as an error).
		230
		231	For sockets, this just means that the other side has stopped sending data,
		232	you can still try to write data, and, in fact, one can return from the EOF
		233	callback and continue writing data, as only the read part has been shut
		234	down.
		235
		236	If an EOF condition has been detected but no C<on_eof> callback has been
		237	set, then a fatal error will be raised with C<$!> set to <0>.
		238
139	=item on_drain => $cb->($handle)	239	=item on_drain => $cb->($handle)
140		240
141	This sets the callback that is called when the write buffer becomes empty	241	This sets the callback that is called once when the write buffer becomes
142	(or when the callback is set and the buffer is empty already).	242	empty (and immediately when the handle object is created).
143		243
144	To append to the write buffer, use the C<< ->push_write >> method.	244	To append to the write buffer, use the C<< ->push_write >> method.
145		245
146	This callback is useful when you don't want to put all of your write data	246	This callback is useful when you don't want to put all of your write data
147	into the queue at once, for example, when you want to write the contents	247	into the queue at once, for example, when you want to write the contents
…		…
149	memory and push it into the queue, but instead only read more data from	249	memory and push it into the queue, but instead only read more data from
150	the file when the write queue becomes empty.	250	the file when the write queue becomes empty.
151		251
152	=item timeout => $fractional_seconds	252	=item timeout => $fractional_seconds
153		253
		254	=item rtimeout => $fractional_seconds
		255
		256	=item wtimeout => $fractional_seconds
		257
154	If non-zero, then this enables an "inactivity" timeout: whenever this many	258	If non-zero, then these enables an "inactivity" timeout: whenever this
155	seconds pass without a successful read or write on the underlying file	259	many seconds pass without a successful read or write on the underlying
156	handle, the C<on_timeout> callback will be invoked (and if that one is	260	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
157	missing, a non-fatal C<ETIMEDOUT> error will be raised).	261	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		262	error will be raised).
158		263
		264	There are three variants of the timeouts that work independently of each
		265	other, for both read and write (triggered when nothing was read I<OR>
		266	written), just read (triggered when nothing was read), and just write:
		267	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		268	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		269	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		270
159	Note that timeout processing is also active when you currently do not have	271	Note that timeout processing is active even when you do not have any
160	any outstanding read or write requests: If you plan to keep the connection	272	outstanding read or write requests: If you plan to keep the connection
161	idle then you should disable the timout temporarily or ignore the timeout	273	idle then you should disable the timeout temporarily or ignore the
162	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	274	timeout in the corresponding C<on_timeout> callback, in which case
163	restart the timeout.	275	AnyEvent::Handle will simply restart the timeout.
164		276
165	Zero (the default) disables this timeout.	277	Zero (the default) disables the corresponding timeout.
166		278
167	=item on_timeout => $cb->($handle)	279	=item on_timeout => $cb->($handle)
		280
		281	=item on_rtimeout => $cb->($handle)
		282
		283	=item on_wtimeout => $cb->($handle)
168		284
169	Called whenever the inactivity timeout passes. If you return from this	285	Called whenever the inactivity timeout passes. If you return from this
170	callback, then the timeout will be reset as if some activity had happened,	286	callback, then the timeout will be reset as if some activity had happened,
171	so this condition is not fatal in any way.	287	so this condition is not fatal in any way.
172		288
…		…
180	be configured to accept only so-and-so much data that it cannot act on	296	be configured to accept only so-and-so much data that it cannot act on
181	(for example, when expecting a line, an attacker could send an unlimited	297	(for example, when expecting a line, an attacker could send an unlimited
182	amount of data without a callback ever being called as long as the line	298	amount of data without a callback ever being called as long as the line
183	isn't finished).	299	isn't finished).
184		300
		301	=item wbuf_max => <bytes>
		302
		303	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
		304	when the write buffer ever (strictly) exceeds this size. This is useful to
		305	avoid some forms of denial-of-service attacks.
		306
		307	Although the units of this parameter is bytes, this is the I<raw> number
		308	of bytes not yet accepted by the kernel. This can make a difference when
		309	you e.g. use TLS, as TLS typically makes your write data larger (but it
		310	can also make it smaller due to compression).
		311
		312	As an example of when this limit is useful, take a chat server that sends
		313	chat messages to a client. If the client does not read those in a timely
		314	manner then the send buffer in the server would grow unbounded.
		315
185	=item autocork => <boolean>	316	=item autocork => <boolean>
186		317
187	When disabled (the default), then C<push_write> will try to immediately	318	When disabled (the default), C<push_write> will try to immediately
188	write the data to the handle, if possible. This avoids having to register	319	write the data to the handle if possible. This avoids having to register
189	a write watcher and wait for the next event loop iteration, but can	320	a write watcher and wait for the next event loop iteration, but can
190	be inefficient if you write multiple small chunks (on the wire, this	321	be inefficient if you write multiple small chunks (on the wire, this
191	disadvantage is usually avoided by your kernel's nagle algorithm, see	322	disadvantage is usually avoided by your kernel's nagle algorithm, see
192	C<no_delay>, but this option can save costly syscalls).	323	C<no_delay>, but this option can save costly syscalls).
193		324
194	When enabled, then writes will always be queued till the next event loop	325	When enabled, writes will always be queued till the next event loop
195	iteration. This is efficient when you do many small writes per iteration,	326	iteration. This is efficient when you do many small writes per iteration,
196	but less efficient when you do a single write only per iteration (or when	327	but less efficient when you do a single write only per iteration (or when
197	the write buffer often is full). It also increases write latency.	328	the write buffer often is full). It also increases write latency.
198		329
199	=item no_delay => <boolean>	330	=item no_delay => <boolean>
…		…
203	the Nagle algorithm, and usually it is beneficial.	334	the Nagle algorithm, and usually it is beneficial.
204		335
205	In some situations you want as low a delay as possible, which can be	336	In some situations you want as low a delay as possible, which can be
206	accomplishd by setting this option to a true value.	337	accomplishd by setting this option to a true value.
207		338
208	The default is your opertaing system's default behaviour (most likely	339	The default is your operating system's default behaviour (most likely
209	enabled), this option explicitly enables or disables it, if possible.	340	enabled). This option explicitly enables or disables it, if possible.
		341
		342	=item keepalive => <boolean>
		343
		344	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		345	normally, TCP connections have no time-out once established, so TCP
		346	connections, once established, can stay alive forever even when the other
		347	side has long gone. TCP keepalives are a cheap way to take down long-lived
		348	TCP connections when the other side becomes unreachable. While the default
		349	is OS-dependent, TCP keepalives usually kick in after around two hours,
		350	and, if the other side doesn't reply, take down the TCP connection some 10
		351	to 15 minutes later.
		352
		353	It is harmless to specify this option for file handles that do not support
		354	keepalives, and enabling it on connections that are potentially long-lived
		355	is usually a good idea.
		356
		357	=item oobinline => <boolean>
		358
		359	BSD majorly fucked up the implementation of TCP urgent data. The result
		360	is that almost no OS implements TCP according to the specs, and every OS
		361	implements it slightly differently.
		362
		363	If you want to handle TCP urgent data, then setting this flag (the default
		364	is enabled) gives you the most portable way of getting urgent data, by
		365	putting it into the stream.
		366
		367	Since BSD emulation of OOB data on top of TCP's urgent data can have
		368	security implications, AnyEvent::Handle sets this flag automatically
		369	unless explicitly specified. Note that setting this flag after
		370	establishing a connection I<may> be a bit too late (data loss could
		371	already have occured on BSD systems), but at least it will protect you
		372	from most attacks.
210		373
211	=item read_size => <bytes>	374	=item read_size => <bytes>
212		375
213	The default read block size (the amount of bytes this module will	376	The initial read block size, the number of bytes this module will try
214	try to read during each loop iteration, which affects memory	377	to read during each loop iteration. Each handle object will consume
215	requirements). Default: C<8192>.	378	at least this amount of memory for the read buffer as well, so when
		379	handling many connections watch out for memory requirements). See also
		380	C<max_read_size>. Default: C<2048>.
		381
		382	=item max_read_size => <bytes>
		383
		384	The maximum read buffer size used by the dynamic adjustment
		385	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		386	one go it will double C<read_size> up to the maximum given by this
		387	option. Default: C<131072> or C<read_size>, whichever is higher.
216		388
217	=item low_water_mark => <bytes>	389	=item low_water_mark => <bytes>
218		390
219	Sets the amount of bytes (default: C<0>) that make up an "empty" write	391	Sets the number of bytes (default: C<0>) that make up an "empty" write
220	buffer: If the write reaches this size or gets even samller it is	392	buffer: If the buffer reaches this size or gets even samller it is
221	considered empty.	393	considered empty.
222		394
223	Sometimes it can be beneficial (for performance reasons) to add data to	395	Sometimes it can be beneficial (for performance reasons) to add data to
224	the write buffer before it is fully drained, but this is a rare case, as	396	the write buffer before it is fully drained, but this is a rare case, as
225	the operating system kernel usually buffers data as well, so the default	397	the operating system kernel usually buffers data as well, so the default
226	is good in almost all cases.	398	is good in almost all cases.
227		399
228	=item linger => <seconds>	400	=item linger => <seconds>
229		401
230	If non-zero (default: C<3600>), then the destructor of the	402	If this is non-zero (default: C<3600>), the destructor of the
231	AnyEvent::Handle object will check whether there is still outstanding	403	AnyEvent::Handle object will check whether there is still outstanding
232	write data and will install a watcher that will write this data to the	404	write data and will install a watcher that will write this data to the
233	socket. No errors will be reported (this mostly matches how the operating	405	socket. No errors will be reported (this mostly matches how the operating
234	system treats outstanding data at socket close time).	406	system treats outstanding data at socket close time).
235		407
236	This will not work for partial TLS data that could not be encoded	408	This will not work for partial TLS data that could not be encoded
237	yet. This data will be lost.	409	yet. This data will be lost. Calling the C<stoptls> method in time might
		410	help.
		411
		412	=item peername => $string
		413
		414	A string used to identify the remote site - usually the DNS hostname
		415	(I<not> IDN!) used to create the connection, rarely the IP address.
		416
		417	Apart from being useful in error messages, this string is also used in TLS
		418	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		419	verification will be skipped when C<peername> is not specified or is
		420	C<undef>.
238		421
239	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	422	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
240		423
241	When this parameter is given, it enables TLS (SSL) mode, that means	424	When this parameter is given, it enables TLS (SSL) mode, that means
242	AnyEvent will start a TLS handshake as soon as the conenction has been	425	AnyEvent will start a TLS handshake as soon as the connection has been
243	established and will transparently encrypt/decrypt data afterwards.	426	established and will transparently encrypt/decrypt data afterwards.
		427
		428	All TLS protocol errors will be signalled as C<EPROTO>, with an
		429	appropriate error message.
244		430
245	TLS mode requires Net::SSLeay to be installed (it will be loaded	431	TLS mode requires Net::SSLeay to be installed (it will be loaded
246	automatically when you try to create a TLS handle): this module doesn't	432	automatically when you try to create a TLS handle): this module doesn't
247	have a dependency on that module, so if your module requires it, you have	433	have a dependency on that module, so if your module requires it, you have
248	to add the dependency yourself.	434	to add the dependency yourself. If Net::SSLeay cannot be loaded or is too
		435	old, you get an C<EPROTO> error.
249		436
250	Unlike TCP, TLS has a server and client side: for the TLS server side, use	437	Unlike TCP, TLS has a server and client side: for the TLS server side, use
251	C<accept>, and for the TLS client side of a connection, use C<connect>	438	C<accept>, and for the TLS client side of a connection, use C<connect>
252	mode.	439	mode.
253		440
254	You can also provide your own TLS connection object, but you have	441	You can also provide your own TLS connection object, but you have
255	to make sure that you call either C<Net::SSLeay::set_connect_state>	442	to make sure that you call either C<Net::SSLeay::set_connect_state>
256	or C<Net::SSLeay::set_accept_state> on it before you pass it to	443	or C<Net::SSLeay::set_accept_state> on it before you pass it to
257	AnyEvent::Handle.	444	AnyEvent::Handle. Also, this module will take ownership of this connection
		445	object.
258		446
		447	At some future point, AnyEvent::Handle might switch to another TLS
		448	implementation, then the option to use your own session object will go
		449	away.
		450
		451	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		452	passing in the wrong integer will lead to certain crash. This most often
		453	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		454	segmentation fault.
		455
259	See the C<< ->starttls >> method for when need to start TLS negotiation later.	456	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
260		457
261	=item tls_ctx => $ssl_ctx	458	=item tls_ctx => $anyevent_tls
262		459
263	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection	460	Use the given C<AnyEvent::TLS> object to create the new TLS connection
264	(unless a connection object was specified directly). If this parameter is	461	(unless a connection object was specified directly). If this
265	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	462	parameter is missing (or C<undef>), then AnyEvent::Handle will use
		463	C<AnyEvent::Handle::TLS_CTX>.
266		464
		465	Instead of an object, you can also specify a hash reference with C<< key
		466	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		467	new TLS context object.
		468
		469	=item on_starttls => $cb->($handle, $success[, $error_message])
		470
		471	This callback will be invoked when the TLS/SSL handshake has finished. If
		472	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		473	(C<on_stoptls> will not be called in this case).
		474
		475	The session in C<< $handle->{tls} >> can still be examined in this
		476	callback, even when the handshake was not successful.
		477
		478	TLS handshake failures will not cause C<on_error> to be invoked when this
		479	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		480
		481	Without this callback, handshake failures lead to C<on_error> being
		482	called as usual.
		483
		484	Note that you cannot just call C<starttls> again in this callback. If you
		485	need to do that, start an zero-second timer instead whose callback can
		486	then call C<< ->starttls >> again.
		487
		488	=item on_stoptls => $cb->($handle)
		489
		490	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		491	set, then it will be invoked after freeing the TLS session. If it is not,
		492	then a TLS shutdown condition will be treated like a normal EOF condition
		493	on the handle.
		494
		495	The session in C<< $handle->{tls} >> can still be examined in this
		496	callback.
		497
		498	This callback will only be called on TLS shutdowns, not when the
		499	underlying handle signals EOF.
		500
267	=item json => JSON or JSON::XS object	501	=item json => L<JSON>, L<JSON::PP> or L<JSON::XS> object
268		502
269	This is the json coder object used by the C<json> read and write types.	503	This is the json coder object used by the C<json> read and write types.
270		504
271	If you don't supply it, then AnyEvent::Handle will create and use a	505	If you don't supply it, then AnyEvent::Handle will create and use a
272	suitable one (on demand), which will write and expect UTF-8 encoded JSON	506	suitable one (on demand), which will write and expect UTF-8 encoded JSON
273	texts.	507	texts.
274		508
		509	=item cbor => L<CBOR::XS> object
		510
		511	This is the cbor coder object used by the C<cbor> read and write types.
		512
		513	If you don't supply it, then AnyEvent::Handle will create and use a
		514	suitable one (on demand), which will write CBOR without using extensions,
		515	if possible. texts.
		516
275	Note that you are responsible to depend on the JSON module if you want to	517	Note that you are responsible to depend on the L<CBOR::XS> module if you
276	use this functionality, as AnyEvent does not have a dependency itself.	518	want to use this functionality, as AnyEvent does not have a dependency on
277		519	it itself.
278	=item filter_r => $cb
279
280	=item filter_w => $cb
281
282	These exist, but are undocumented at this time. (They are used internally
283	by the TLS code).
284		520
285	=back	521	=back
286		522
287	=cut	523	=cut
288		524
289	sub new {	525	sub new {
290	my $class = shift;	526	my $class = shift;
291
292	my $self = bless { @_ }, $class;	527	my $self = bless { @_ }, $class;
293		528
294	$self->{fh} or Carp::croak "mandatory argument fh is missing";	529	if ($self->{fh}) {
		530	$self->_start;
		531	return unless $self->{fh}; # could be gone by now
		532
		533	} elsif ($self->{connect}) {
		534	require AnyEvent::Socket;
		535
		536	$self->{peername} = $self->{connect}[0]
		537	unless exists $self->{peername};
		538
		539	$self->{_skip_drain_rbuf} = 1;
		540
		541	{
		542	Scalar::Util::weaken (my $self = $self);
		543
		544	$self->{_connect} =
		545	AnyEvent::Socket::tcp_connect (
		546	$self->{connect}[0],
		547	$self->{connect}[1],
		548	sub {
		549	my ($fh, $host, $port, $retry) = @_;
		550
		551	delete $self->{_connect}; # no longer needed
		552
		553	if ($fh) {
		554	$self->{fh} = $fh;
		555
		556	delete $self->{_skip_drain_rbuf};
		557	$self->_start;
		558
		559	$self->{on_connect}
		560	and $self->{on_connect}($self, $host, $port, sub {
		561	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		562	$self->{_skip_drain_rbuf} = 1;
		563	&$retry;
		564	});
		565
		566	} else {
		567	if ($self->{on_connect_error}) {
		568	$self->{on_connect_error}($self, "$!");
		569	$self->destroy if $self;
		570	} else {
		571	$self->_error ($!, 1);
		572	}
		573	}
		574	},
		575	sub {
		576	local $self->{fh} = $_[0];
		577
		578	$self->{on_prepare}
		579	? $self->{on_prepare}->($self)
		580	: ()
		581	}
		582	);
		583	}
		584
		585	} else {
		586	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		587	}
		588
		589	$self
		590	}
		591
		592	sub _start {
		593	my ($self) = @_;
		594
		595	# too many clueless people try to use udp and similar sockets
		596	# with AnyEvent::Handle, do them a favour.
		597	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		598	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		599	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
295		600
296	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	601	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
297		602
298	if ($self->{tls}) {	603	$self->{_activity} =
299	require Net::SSLeay;	604	$self->{_ractivity} =
		605	$self->{_wactivity} = AE::now;
		606
		607	$self->{read_size} ||= 2048;
		608	$self->{max_read_size} = $self->{read_size}
		609	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		610
		611	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		612	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		613	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		614
		615	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		616	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		617
		618	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		619
300	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	620	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
301	}	621	if $self->{tls};
302		622
303	$self->{_activity} = AnyEvent->now;
304	$self->_timeout;
305
306	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	623	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
307	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
308		624
309	$self->start_read	625	$self->start_read
310	if $self->{on_read};	626	if $self->{on_read} || @{ $self->{_queue} };
311		627
312	$self	628	$self->_drain_wbuf;
313	}
314
315	sub _shutdown {
316	my ($self) = @_;
317
318	delete $self->{_tw};
319	delete $self->{_rw};
320	delete $self->{_ww};
321	delete $self->{fh};
322
323	$self->stoptls;
324
325	delete $self->{on_read};
326	delete $self->{_queue};
327	}	629	}
328		630
329	sub _error {	631	sub _error {
330	my ($self, $errno, $fatal) = @_;	632	my ($self, $errno, $fatal, $message) = @_;
331
332	$self->_shutdown
333	if $fatal;
334		633
335	$! = $errno;	634	$! = $errno;
		635	$message ||= "$!";
336		636
337	if ($self->{on_error}) {	637	if ($self->{on_error}) {
338	$self->{on_error}($self, $fatal);	638	$self->{on_error}($self, $fatal, $message);
339	} else {	639	$self->destroy if $fatal;
		640	} elsif ($self->{fh} || $self->{connect}) {
		641	$self->destroy;
340	Carp::croak "AnyEvent::Handle uncaught error: $!";	642	Carp::croak "AnyEvent::Handle uncaught error: $message";
341	}	643	}
342	}	644	}
343		645
344	=item $fh = $handle->fh	646	=item $fh = $handle->fh
345		647
…		…
369	$_[0]{on_eof} = $_[1];	671	$_[0]{on_eof} = $_[1];
370	}	672	}
371		673
372	=item $handle->on_timeout ($cb)	674	=item $handle->on_timeout ($cb)
373		675
374	Replace the current C<on_timeout> callback, or disables the callback (but	676	=item $handle->on_rtimeout ($cb)
375	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
376	argument and method.
377		677
378	=cut	678	=item $handle->on_wtimeout ($cb)
379		679
380	sub on_timeout {	680	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
381	$_[0]{on_timeout} = $_[1];	681	callback, or disables the callback (but not the timeout) if C<$cb> =
382	}	682	C<undef>. See the C<timeout> constructor argument and method.
		683
		684	=cut
		685
		686	# see below
383		687
384	=item $handle->autocork ($boolean)	688	=item $handle->autocork ($boolean)
385		689
386	Enables or disables the current autocork behaviour (see C<autocork>	690	Enables or disables the current autocork behaviour (see C<autocork>
387	constructor argument).	691	constructor argument). Changes will only take effect on the next write.
388		692
389	=cut	693	=cut
		694
		695	sub autocork {
		696	$_[0]{autocork} = $_[1];
		697	}
390		698
391	=item $handle->no_delay ($boolean)	699	=item $handle->no_delay ($boolean)
392		700
393	Enables or disables the C<no_delay> setting (see constructor argument of	701	Enables or disables the C<no_delay> setting (see constructor argument of
394	the same name for details).	702	the same name for details).
…		…
396	=cut	704	=cut
397		705
398	sub no_delay {	706	sub no_delay {
399	$_[0]{no_delay} = $_[1];	707	$_[0]{no_delay} = $_[1];
400		708
		709	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		710	if $_[0]{fh};
		711	}
		712
		713	=item $handle->keepalive ($boolean)
		714
		715	Enables or disables the C<keepalive> setting (see constructor argument of
		716	the same name for details).
		717
		718	=cut
		719
		720	sub keepalive {
		721	$_[0]{keepalive} = $_[1];
		722
401	eval {	723	eval {
402	local $SIG{__DIE__};	724	local $SIG{__DIE__};
403	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	725	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		726	if $_[0]{fh};
404	};	727	};
405	}	728	}
406		729
		730	=item $handle->oobinline ($boolean)
		731
		732	Enables or disables the C<oobinline> setting (see constructor argument of
		733	the same name for details).
		734
		735	=cut
		736
		737	sub oobinline {
		738	$_[0]{oobinline} = $_[1];
		739
		740	eval {
		741	local $SIG{__DIE__};
		742	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		743	if $_[0]{fh};
		744	};
		745	}
		746
		747	=item $handle->keepalive ($boolean)
		748
		749	Enables or disables the C<keepalive> setting (see constructor argument of
		750	the same name for details).
		751
		752	=cut
		753
		754	sub keepalive {
		755	$_[0]{keepalive} = $_[1];
		756
		757	eval {
		758	local $SIG{__DIE__};
		759	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		760	if $_[0]{fh};
		761	};
		762	}
		763
		764	=item $handle->on_starttls ($cb)
		765
		766	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		767
		768	=cut
		769
		770	sub on_starttls {
		771	$_[0]{on_starttls} = $_[1];
		772	}
		773
		774	=item $handle->on_stoptls ($cb)
		775
		776	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		777
		778	=cut
		779
		780	sub on_stoptls {
		781	$_[0]{on_stoptls} = $_[1];
		782	}
		783
		784	=item $handle->rbuf_max ($max_octets)
		785
		786	Configures the C<rbuf_max> setting (C<undef> disables it).
		787
		788	=item $handle->wbuf_max ($max_octets)
		789
		790	Configures the C<wbuf_max> setting (C<undef> disables it).
		791
		792	=cut
		793
		794	sub rbuf_max {
		795	$_[0]{rbuf_max} = $_[1];
		796	}
		797
		798	sub wbuf_max {
		799	$_[0]{wbuf_max} = $_[1];
		800	}
		801
407	#############################################################################	802	#############################################################################
408		803
409	=item $handle->timeout ($seconds)	804	=item $handle->timeout ($seconds)
410		805
		806	=item $handle->rtimeout ($seconds)
		807
		808	=item $handle->wtimeout ($seconds)
		809
411	Configures (or disables) the inactivity timeout.	810	Configures (or disables) the inactivity timeout.
412		811
413	=cut	812	The timeout will be checked instantly, so this method might destroy the
		813	handle before it returns.
414		814
415	sub timeout {	815	=item $handle->timeout_reset
		816
		817	=item $handle->rtimeout_reset
		818
		819	=item $handle->wtimeout_reset
		820
		821	Reset the activity timeout, as if data was received or sent.
		822
		823	These methods are cheap to call.
		824
		825	=cut
		826
		827	for my $dir ("", "r", "w") {
		828	my $timeout = "${dir}timeout";
		829	my $tw = "_${dir}tw";
		830	my $on_timeout = "on_${dir}timeout";
		831	my $activity = "_${dir}activity";
		832	my $cb;
		833
		834	*$on_timeout = sub {
		835	$_[0]{$on_timeout} = $_[1];
		836	};
		837
		838	*$timeout = sub {
416	my ($self, $timeout) = @_;	839	my ($self, $new_value) = @_;
417		840
		841	$new_value >= 0
		842	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		843
418	$self->{timeout} = $timeout;	844	$self->{$timeout} = $new_value;
419	$self->_timeout;	845	delete $self->{$tw}; &$cb;
420	}	846	};
421		847
		848	*{"${dir}timeout_reset"} = sub {
		849	$_[0]{$activity} = AE::now;
		850	};
		851
		852	# main workhorse:
422	# reset the timeout watcher, as neccessary	853	# reset the timeout watcher, as neccessary
423	# also check for time-outs	854	# also check for time-outs
424	sub _timeout {	855	$cb = sub {
425	my ($self) = @_;	856	my ($self) = @_;
426		857
427	if ($self->{timeout}) {	858	if ($self->{$timeout} && $self->{fh}) {
428	my $NOW = AnyEvent->now;	859	my $NOW = AE::now;
429		860
430	# when would the timeout trigger?	861	# when would the timeout trigger?
431	my $after = $self->{_activity} + $self->{timeout} - $NOW;	862	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
432		863
433	# now or in the past already?	864	# now or in the past already?
434	if ($after <= 0) {	865	if ($after <= 0) {
435	$self->{_activity} = $NOW;	866	$self->{$activity} = $NOW;
436		867
437	if ($self->{on_timeout}) {	868	if ($self->{$on_timeout}) {
438	$self->{on_timeout}($self);	869	$self->{$on_timeout}($self);
439	} else {	870	} else {
440	$self->_error (&Errno::ETIMEDOUT);	871	$self->_error (Errno::ETIMEDOUT);
		872	}
		873
		874	# callback could have changed timeout value, optimise
		875	return unless $self->{$timeout};
		876
		877	# calculate new after
		878	$after = $self->{$timeout};
441	}	879	}
442		880
443	# callback could have changed timeout value, optimise	881	Scalar::Util::weaken $self;
444	return unless $self->{timeout};	882	return unless $self; # ->error could have destroyed $self
445		883
446	# calculate new after	884	$self->{$tw} ||= AE::timer $after, 0, sub {
447	$after = $self->{timeout};	885	delete $self->{$tw};
		886	$cb->($self);
		887	};
		888	} else {
		889	delete $self->{$tw};
448	}	890	}
449
450	Scalar::Util::weaken $self;
451	return unless $self; # ->error could have destroyed $self
452
453	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
454	delete $self->{_tw};
455	$self->_timeout;
456	});
457	} else {
458	delete $self->{_tw};
459	}	891	}
460	}	892	}
461		893
462	#############################################################################	894	#############################################################################
463		895
…		…
470		902
471	The write queue is very simple: you can add data to its end, and	903	The write queue is very simple: you can add data to its end, and
472	AnyEvent::Handle will automatically try to get rid of it for you.	904	AnyEvent::Handle will automatically try to get rid of it for you.
473		905
474	When data could be written and the write buffer is shorter then the low	906	When data could be written and the write buffer is shorter then the low
475	water mark, the C<on_drain> callback will be invoked.	907	water mark, the C<on_drain> callback will be invoked once.
476		908
477	=over 4	909	=over 4
478		910
479	=item $handle->on_drain ($cb)	911	=item $handle->on_drain ($cb)
480		912
481	Sets the C<on_drain> callback or clears it (see the description of	913	Sets the C<on_drain> callback or clears it (see the description of
482	C<on_drain> in the constructor).	914	C<on_drain> in the constructor).
483		915
		916	This method may invoke callbacks (and therefore the handle might be
		917	destroyed after it returns).
		918
484	=cut	919	=cut
485		920
486	sub on_drain {	921	sub on_drain {
487	my ($self, $cb) = @_;	922	my ($self, $cb) = @_;
488		923
489	$self->{on_drain} = $cb;	924	$self->{on_drain} = $cb;
490		925
491	$cb->($self)	926	$cb->($self)
492	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	927	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
493	}	928	}
494		929
495	=item $handle->push_write ($data)	930	=item $handle->push_write ($data)
496		931
497	Queues the given scalar to be written. You can push as much data as you	932	Queues the given scalar to be written. You can push as much data as
498	want (only limited by the available memory), as C<AnyEvent::Handle>	933	you want (only limited by the available memory and C<wbuf_max>), as
499	buffers it independently of the kernel.	934	C<AnyEvent::Handle> buffers it independently of the kernel.
		935
		936	This method may invoke callbacks (and therefore the handle might be
		937	destroyed after it returns).
500		938
501	=cut	939	=cut
502		940
503	sub _drain_wbuf {	941	sub _drain_wbuf {
504	my ($self) = @_;	942	my ($self) = @_;
…		…
508	Scalar::Util::weaken $self;	946	Scalar::Util::weaken $self;
509		947
510	my $cb = sub {	948	my $cb = sub {
511	my $len = syswrite $self->{fh}, $self->{wbuf};	949	my $len = syswrite $self->{fh}, $self->{wbuf};
512		950
513	if ($len >= 0) {	951	if (defined $len) {
514	substr $self->{wbuf}, 0, $len, "";	952	substr $self->{wbuf}, 0, $len, "";
515		953
516	$self->{_activity} = AnyEvent->now;	954	$self->{_activity} = $self->{_wactivity} = AE::now;
517		955
518	$self->{on_drain}($self)	956	$self->{on_drain}($self)
519	if $self->{low_water_mark} >= length $self->{wbuf}	957	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
520	&& $self->{on_drain};	958	&& $self->{on_drain};
521		959
522	delete $self->{_ww} unless length $self->{wbuf};	960	delete $self->{_ww} unless length $self->{wbuf};
523	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	961	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
524	$self->_error ($!, 1);	962	$self->_error ($!, 1);
…		…
527		965
528	# try to write data immediately	966	# try to write data immediately
529	$cb->() unless $self->{autocork};	967	$cb->() unless $self->{autocork};
530		968
531	# if still data left in wbuf, we need to poll	969	# if still data left in wbuf, we need to poll
532	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	970	$self->{_ww} = AE::io $self->{fh}, 1, $cb
533	if length $self->{wbuf};	971	if length $self->{wbuf};
		972
		973	if (
		974	defined $self->{wbuf_max}
		975	&& $self->{wbuf_max} < length $self->{wbuf}
		976	) {
		977	$self->_error (Errno::ENOSPC, 1), return;
		978	}
534	};	979	};
535	}	980	}
536		981
537	our %WH;	982	our %WH;
538		983
		984	# deprecated
539	sub register_write_type($$) {	985	sub register_write_type($$) {
540	$WH{$_[0]} = $_[1];	986	$WH{$_[0]} = $_[1];
541	}	987	}
542		988
543	sub push_write {	989	sub push_write {
544	my $self = shift;	990	my $self = shift;
545		991
546	if (@_ > 1) {	992	if (@_ > 1) {
547	my $type = shift;	993	my $type = shift;
548		994
		995	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
549	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	996	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
550	->($self, @_);	997	->($self, @_);
551	}	998	}
552		999
		1000	# we downgrade here to avoid hard-to-track-down bugs,
		1001	# and diagnose the problem earlier and better.
		1002
553	if ($self->{filter_w}) {	1003	if ($self->{tls}) {
554	$self->{filter_w}($self, \$_[0]);	1004	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
		1005	&_dotls ($self) if $self->{fh};
555	} else {	1006	} else {
556	$self->{wbuf} .= $_[0];	1007	utf8::downgrade $self->{wbuf} .= $_[0];
557	$self->_drain_wbuf;	1008	$self->_drain_wbuf if $self->{fh};
558	}	1009	}
559	}	1010	}
560		1011
561	=item $handle->push_write (type => @args)	1012	=item $handle->push_write (type => @args)
562		1013
563	Instead of formatting your data yourself, you can also let this module do	1014	Instead of formatting your data yourself, you can also let this module
564	the job by specifying a type and type-specific arguments.	1015	do the job by specifying a type and type-specific arguments. You
		1016	can also specify the (fully qualified) name of a package, in which
		1017	case AnyEvent tries to load the package and then expects to find the
		1018	C<anyevent_write_type> function inside (see "custom write types", below).
565		1019
566	Predefined types are (if you have ideas for additional types, feel free to	1020	Predefined types are (if you have ideas for additional types, feel free to
567	drop by and tell us):	1021	drop by and tell us):
568		1022
569	=over 4	1023	=over 4
…		…
576	=cut	1030	=cut
577		1031
578	register_write_type netstring => sub {	1032	register_write_type netstring => sub {
579	my ($self, $string) = @_;	1033	my ($self, $string) = @_;
580		1034
581	sprintf "%d:%s,", (length $string), $string	1035	(length $string) . ":$string,"
582	};	1036	};
583		1037
584	=item packstring => $format, $data	1038	=item packstring => $format, $data
585		1039
586	An octet string prefixed with an encoded length. The encoding C<$format>	1040	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
608		1062
609	The generated JSON text is guaranteed not to contain any newlines: While	1063	The generated JSON text is guaranteed not to contain any newlines: While
610	this module doesn't need delimiters after or between JSON texts to be	1064	this module doesn't need delimiters after or between JSON texts to be
611	able to read them, many other languages depend on that.	1065	able to read them, many other languages depend on that.
612		1066
613	A simple RPC protocol that interoperates easily with others is to send	1067	A simple RPC protocol that interoperates easily with other languages is
614	JSON arrays (or objects, although arrays are usually the better choice as	1068	to send JSON arrays (or objects, although arrays are usually the better
615	they mimic how function argument passing works) and a newline after each	1069	choice as they mimic how function argument passing works) and a newline
616	JSON text:	1070	after each JSON text:
617		1071
618	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever	1072	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
619	$handle->push_write ("\012");	1073	$handle->push_write ("\012");
620		1074
621	An AnyEvent::Handle receiver would simply use the C<json> read type and	1075	An AnyEvent::Handle receiver would simply use the C<json> read type and
…		…
624	$handle->push_read (json => sub { my $array = $_[1]; ... });	1078	$handle->push_read (json => sub { my $array = $_[1]; ... });
625		1079
626	Other languages could read single lines terminated by a newline and pass	1080	Other languages could read single lines terminated by a newline and pass
627	this line into their JSON decoder of choice.	1081	this line into their JSON decoder of choice.
628		1082
		1083	=item cbor => $perl_scalar
		1084
		1085	Encodes the given scalar into a CBOR value. Unless you provide your own
		1086	L<CBOR::XS> object, this means it will be encoded to a CBOR string not
		1087	using any extensions, if possible.
		1088
		1089	CBOR values are self-delimiting, so you can write CBOR at one end of
		1090	a handle and read them at the other end without using any additional
		1091	framing.
		1092
		1093	A simple nd very very fast RPC protocol that interoperates with
		1094	other languages is to send CBOR and receive CBOR values (arrays are
		1095	recommended):
		1096
		1097	$handle->push_write (cbor => ["method", "arg1", "arg2"]); # whatever
		1098
		1099	An AnyEvent::Handle receiver would simply use the C<cbor> read type:
		1100
		1101	$handle->push_read (cbor => sub { my $array = $_[1]; ... });
		1102
629	=cut	1103	=cut
		1104
		1105	sub json_coder() {
		1106	eval { require JSON::XS; JSON::XS->new->utf8 }
		1107	|| do { require JSON::PP; JSON::PP->new->utf8 }
		1108	}
630		1109
631	register_write_type json => sub {	1110	register_write_type json => sub {
632	my ($self, $ref) = @_;	1111	my ($self, $ref) = @_;
633		1112
634	require JSON;	1113	($self->{json} ||= json_coder)
		1114	->encode ($ref)
		1115	};
635		1116
636	$self->{json} ? $self->{json}->encode ($ref)	1117	sub cbor_coder() {
637	: JSON::encode_json ($ref)	1118	require CBOR::XS;
		1119	CBOR::XS->new
		1120	}
		1121
		1122	register_write_type cbor => sub {
		1123	my ($self, $scalar) = @_;
		1124
		1125	($self->{cbor} ||= cbor_coder)
		1126	->encode ($scalar)
638	};	1127	};
639		1128
640	=item storable => $reference	1129	=item storable => $reference
641		1130
642	Freezes the given reference using L<Storable> and writes it to the	1131	Freezes the given reference using L<Storable> and writes it to the
…		…
645	=cut	1134	=cut
646		1135
647	register_write_type storable => sub {	1136	register_write_type storable => sub {
648	my ($self, $ref) = @_;	1137	my ($self, $ref) = @_;
649		1138
650	require Storable;	1139	require Storable unless $Storable::VERSION;
651		1140
652	pack "w/a*", Storable::nfreeze ($ref)	1141	pack "w/a*", Storable::nfreeze ($ref)
653	};	1142	};
654		1143
655	=back	1144	=back
656		1145
657	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1146	=item $handle->push_shutdown
658		1147
659	This function (not method) lets you add your own types to C<push_write>.	1148	Sometimes you know you want to close the socket after writing your data
		1149	before it was actually written. One way to do that is to replace your
		1150	C<on_drain> handler by a callback that shuts down the socket (and set
		1151	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1152	replaces the C<on_drain> callback with:
		1153
		1154	sub { shutdown $_[0]{fh}, 1 }
		1155
		1156	This simply shuts down the write side and signals an EOF condition to the
		1157	the peer.
		1158
		1159	You can rely on the normal read queue and C<on_eof> handling
		1160	afterwards. This is the cleanest way to close a connection.
		1161
		1162	This method may invoke callbacks (and therefore the handle might be
		1163	destroyed after it returns).
		1164
		1165	=cut
		1166
		1167	sub push_shutdown {
		1168	my ($self) = @_;
		1169
		1170	delete $self->{low_water_mark};
		1171	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1172	}
		1173
		1174	=item custom write types - Package::anyevent_write_type $handle, @args
		1175
		1176	Instead of one of the predefined types, you can also specify the name of
		1177	a package. AnyEvent will try to load the package and then expects to find
		1178	a function named C<anyevent_write_type> inside. If it isn't found, it
		1179	progressively tries to load the parent package until it either finds the
		1180	function (good) or runs out of packages (bad).
		1181
660	Whenever the given C<type> is used, C<push_write> will invoke the code	1182	Whenever the given C<type> is used, C<push_write> will the function with
661	reference with the handle object and the remaining arguments.	1183	the handle object and the remaining arguments.
662		1184
663	The code reference is supposed to return a single octet string that will	1185	The function is supposed to return a single octet string that will be
664	be appended to the write buffer.	1186	appended to the write buffer, so you can mentally treat this function as a
		1187	"arguments to on-the-wire-format" converter.
665		1188
666	Note that this is a function, and all types registered this way will be	1189	Example: implement a custom write type C<join> that joins the remaining
667	global, so try to use unique names.	1190	arguments using the first one.
		1191
		1192	$handle->push_write (My::Type => " ", 1,2,3);
		1193
		1194	# uses the following package, which can be defined in the "My::Type" or in
		1195	# the "My" modules to be auto-loaded, or just about anywhere when the
		1196	# My::Type::anyevent_write_type is defined before invoking it.
		1197
		1198	package My::Type;
		1199
		1200	sub anyevent_write_type {
		1201	my ($handle, $delim, @args) = @_;
		1202
		1203	join $delim, @args
		1204	}
668		1205
669	=cut	1206	=cut
670		1207
671	#############################################################################	1208	#############################################################################
672		1209
…		…
681	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1218	ways, the "simple" way, using only C<on_read> and the "complex" way, using
682	a queue.	1219	a queue.
683		1220
684	In the simple case, you just install an C<on_read> callback and whenever	1221	In the simple case, you just install an C<on_read> callback and whenever
685	new data arrives, it will be called. You can then remove some data (if	1222	new data arrives, it will be called. You can then remove some data (if
686	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna	1223	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
687	leave the data there if you want to accumulate more (e.g. when only a	1224	leave the data there if you want to accumulate more (e.g. when only a
688	partial message has been received so far).	1225	partial message has been received so far), or change the read queue with
		1226	e.g. C<push_read>.
689		1227
690	In the more complex case, you want to queue multiple callbacks. In this	1228	In the more complex case, you want to queue multiple callbacks. In this
691	case, AnyEvent::Handle will call the first queued callback each time new	1229	case, AnyEvent::Handle will call the first queued callback each time new
692	data arrives (also the first time it is queued) and removes it when it has	1230	data arrives (also the first time it is queued) and remove it when it has
693	done its job (see C<push_read>, below).	1231	done its job (see C<push_read>, below).
694		1232
695	This way you can, for example, push three line-reads, followed by reading	1233	This way you can, for example, push three line-reads, followed by reading
696	a chunk of data, and AnyEvent::Handle will execute them in order.	1234	a chunk of data, and AnyEvent::Handle will execute them in order.
697		1235
…		…
754	=cut	1292	=cut
755		1293
756	sub _drain_rbuf {	1294	sub _drain_rbuf {
757	my ($self) = @_;	1295	my ($self) = @_;
758		1296
		1297	# avoid recursion
		1298	return if $self->{_skip_drain_rbuf};
759	local $self->{_in_drain} = 1;	1299	local $self->{_skip_drain_rbuf} = 1;
760
761	if (
762	defined $self->{rbuf_max}
763	&& $self->{rbuf_max} < length $self->{rbuf}
764	) {
765	$self->_error (&Errno::ENOSPC, 1), return;
766	}
767		1300
768	while () {	1301	while () {
		1302	# we need to use a separate tls read buffer, as we must not receive data while
		1303	# we are draining the buffer, and this can only happen with TLS.
		1304	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1305	if exists $self->{_tls_rbuf};
		1306
769	my $len = length $self->{rbuf};	1307	my $len = length $self->{rbuf};
770		1308
771	if (my $cb = shift @{ $self->{_queue} }) {	1309	if (my $cb = shift @{ $self->{_queue} }) {
772	unless ($cb->($self)) {	1310	unless ($cb->($self)) {
773	if ($self->{_eof}) {	1311	# no progress can be made
774	# no progress can be made (not enough data and no data forthcoming)	1312	# (not enough data and no data forthcoming)
775	$self->_error (&Errno::EPIPE, 1), return;	1313	$self->_error (Errno::EPIPE, 1), return
776	}	1314	if $self->{_eof};
777		1315
778	unshift @{ $self->{_queue} }, $cb;	1316	unshift @{ $self->{_queue} }, $cb;
779	last;	1317	last;
780	}	1318	}
781	} elsif ($self->{on_read}) {	1319	} elsif ($self->{on_read}) {
…		…
788	&& !@{ $self->{_queue} } # and the queue is still empty	1326	&& !@{ $self->{_queue} } # and the queue is still empty
789	&& $self->{on_read} # but we still have on_read	1327	&& $self->{on_read} # but we still have on_read
790	) {	1328	) {
791	# no further data will arrive	1329	# no further data will arrive
792	# so no progress can be made	1330	# so no progress can be made
793	$self->_error (&Errno::EPIPE, 1), return	1331	$self->_error (Errno::EPIPE, 1), return
794	if $self->{_eof};	1332	if $self->{_eof};
795		1333
796	last; # more data might arrive	1334	last; # more data might arrive
797	}	1335	}
798	} else {	1336	} else {
799	# read side becomes idle	1337	# read side becomes idle
800	delete $self->{_rw};	1338	delete $self->{_rw} unless $self->{tls};
801	last;	1339	last;
802	}	1340	}
803	}	1341	}
804		1342
805	if ($self->{_eof}) {	1343	if ($self->{_eof}) {
806	if ($self->{on_eof}) {	1344	$self->{on_eof}
807	$self->{on_eof}($self)	1345	? $self->{on_eof}($self)
808	} else {	1346	: $self->_error (0, 1, "Unexpected end-of-file");
809	$self->_error (0, 1);	1347
810	}	1348	return;
		1349	}
		1350
		1351	if (
		1352	defined $self->{rbuf_max}
		1353	&& $self->{rbuf_max} < length $self->{rbuf}
		1354	) {
		1355	$self->_error (Errno::ENOSPC, 1), return;
811	}	1356	}
812		1357
813	# may need to restart read watcher	1358	# may need to restart read watcher
814	unless ($self->{_rw}) {	1359	unless ($self->{_rw}) {
815	$self->start_read	1360	$self->start_read
…		…
821		1366
822	This replaces the currently set C<on_read> callback, or clears it (when	1367	This replaces the currently set C<on_read> callback, or clears it (when
823	the new callback is C<undef>). See the description of C<on_read> in the	1368	the new callback is C<undef>). See the description of C<on_read> in the
824	constructor.	1369	constructor.
825		1370
		1371	This method may invoke callbacks (and therefore the handle might be
		1372	destroyed after it returns).
		1373
826	=cut	1374	=cut
827		1375
828	sub on_read {	1376	sub on_read {
829	my ($self, $cb) = @_;	1377	my ($self, $cb) = @_;
830		1378
831	$self->{on_read} = $cb;	1379	$self->{on_read} = $cb;
832	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1380	$self->_drain_rbuf if $cb;
833	}	1381	}
834		1382
835	=item $handle->rbuf	1383	=item $handle->rbuf
836		1384
837	Returns the read buffer (as a modifiable lvalue).	1385	Returns the read buffer (as a modifiable lvalue). You can also access the
		1386	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1387	much faster, and no less clean).
838		1388
839	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1389	The only operation allowed on the read buffer (apart from looking at it)
840	you want.	1390	is removing data from its beginning. Otherwise modifying or appending to
		1391	it is not allowed and will lead to hard-to-track-down bugs.
841		1392
842	NOTE: The read buffer should only be used or modified if the C<on_read>,	1393	NOTE: The read buffer should only be used or modified in the C<on_read>
843	C<push_read> or C<unshift_read> methods are used. The other read methods	1394	callback or when C<push_read> or C<unshift_read> are used with a single
844	automatically manage the read buffer.	1395	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1396	will manage the read buffer on their own.
845		1397
846	=cut	1398	=cut
847		1399
848	sub rbuf : lvalue {	1400	sub rbuf : lvalue {
849	$_[0]{rbuf}	1401	$_[0]{rbuf}
…		…
866		1418
867	If enough data was available, then the callback must remove all data it is	1419	If enough data was available, then the callback must remove all data it is
868	interested in (which can be none at all) and return a true value. After returning	1420	interested in (which can be none at all) and return a true value. After returning
869	true, it will be removed from the queue.	1421	true, it will be removed from the queue.
870		1422
		1423	These methods may invoke callbacks (and therefore the handle might be
		1424	destroyed after it returns).
		1425
871	=cut	1426	=cut
872		1427
873	our %RH;	1428	our %RH;
874		1429
875	sub register_read_type($$) {	1430	sub register_read_type($$) {
…		…
881	my $cb = pop;	1436	my $cb = pop;
882		1437
883	if (@_) {	1438	if (@_) {
884	my $type = shift;	1439	my $type = shift;
885		1440
		1441	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
886	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1442	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
887	->($self, $cb, @_);	1443	->($self, $cb, @_);
888	}	1444	}
889		1445
890	push @{ $self->{_queue} }, $cb;	1446	push @{ $self->{_queue} }, $cb;
891	$self->_drain_rbuf unless $self->{_in_drain};	1447	$self->_drain_rbuf;
892	}	1448	}
893		1449
894	sub unshift_read {	1450	sub unshift_read {
895	my $self = shift;	1451	my $self = shift;
896	my $cb = pop;	1452	my $cb = pop;
897		1453
898	if (@_) {	1454	if (@_) {
899	my $type = shift;	1455	my $type = shift;
900		1456
		1457	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
901	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1458	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
902	->($self, $cb, @_);	1459	->($self, $cb, @_);
903	}	1460	}
904		1461
905
906	unshift @{ $self->{_queue} }, $cb;	1462	unshift @{ $self->{_queue} }, $cb;
907	$self->_drain_rbuf unless $self->{_in_drain};	1463	$self->_drain_rbuf;
908	}	1464	}
909		1465
910	=item $handle->push_read (type => @args, $cb)	1466	=item $handle->push_read (type => @args, $cb)
911		1467
912	=item $handle->unshift_read (type => @args, $cb)	1468	=item $handle->unshift_read (type => @args, $cb)
913		1469
914	Instead of providing a callback that parses the data itself you can chose	1470	Instead of providing a callback that parses the data itself you can chose
915	between a number of predefined parsing formats, for chunks of data, lines	1471	between a number of predefined parsing formats, for chunks of data, lines
916	etc.	1472	etc. You can also specify the (fully qualified) name of a package, in
		1473	which case AnyEvent tries to load the package and then expects to find the
		1474	C<anyevent_read_type> function inside (see "custom read types", below).
917		1475
918	Predefined types are (if you have ideas for additional types, feel free to	1476	Predefined types are (if you have ideas for additional types, feel free to
919	drop by and tell us):	1477	drop by and tell us):
920		1478
921	=over 4	1479	=over 4
…		…
927	data.	1485	data.
928		1486
929	Example: read 2 bytes.	1487	Example: read 2 bytes.
930		1488
931	$handle->push_read (chunk => 2, sub {	1489	$handle->push_read (chunk => 2, sub {
932	warn "yay ", unpack "H*", $_[1];	1490	say "yay " . unpack "H*", $_[1];
933	});	1491	});
934		1492
935	=cut	1493	=cut
936		1494
937	register_read_type chunk => sub {	1495	register_read_type chunk => sub {
…		…
967		1525
968	register_read_type line => sub {	1526	register_read_type line => sub {
969	my ($self, $cb, $eol) = @_;	1527	my ($self, $cb, $eol) = @_;
970		1528
971	if (@_ < 3) {	1529	if (@_ < 3) {
972	# this is more than twice as fast as the generic code below	1530	# this is faster then the generic code below
973	sub {	1531	sub {
974	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;	1532	(my $pos = index $_[0]{rbuf}, "\012") >= 0
		1533	or return;
975		1534
		1535	(my $str = substr $_[0]{rbuf}, 0, $pos + 1, "") =~ s/(\015?\012)\Z// or die;
976	$cb->($_[0], $1, $2);	1536	$cb->($_[0], $str, "$1");
977	1	1537	1
978	}	1538	}
979	} else {	1539	} else {
980	$eol = quotemeta $eol unless ref $eol;	1540	$eol = quotemeta $eol unless ref $eol;
981	$eol = qr|^(.*?)($eol)|s;	1541	$eol = qr|^(.*?)($eol)|s;
982		1542
983	sub {	1543	sub {
984	$_[0]{rbuf} =~ s/$eol// or return;	1544	$_[0]{rbuf} =~ s/$eol// or return;
985		1545
986	$cb->($_[0], $1, $2);	1546	$cb->($_[0], "$1", "$2");
987	1	1547	1
988	}	1548	}
989	}	1549	}
990	};	1550	};
991		1551
…		…
1013	the receive buffer when neither C<$accept> nor C<$reject> match,	1573	the receive buffer when neither C<$accept> nor C<$reject> match,
1014	and everything preceding and including the match will be accepted	1574	and everything preceding and including the match will be accepted
1015	unconditionally. This is useful to skip large amounts of data that you	1575	unconditionally. This is useful to skip large amounts of data that you
1016	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1576	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
1017	have to start matching from the beginning. This is purely an optimisation	1577	have to start matching from the beginning. This is purely an optimisation
1018	and is usually worth only when you expect more than a few kilobytes.	1578	and is usually worth it only when you expect more than a few kilobytes.
1019		1579
1020	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1580	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
1021	expect the header to be very large (it isn't in practise, but...), we use	1581	expect the header to be very large (it isn't in practice, but...), we use
1022	a skip regex to skip initial portions. The skip regex is tricky in that	1582	a skip regex to skip initial portions. The skip regex is tricky in that
1023	it only accepts something not ending in either \015 or \012, as these are	1583	it only accepts something not ending in either \015 or \012, as these are
1024	required for the accept regex.	1584	required for the accept regex.
1025		1585
1026	$handle->push_read (regex =>	1586	$handle->push_read (regex =>
…		…
1039		1599
1040	sub {	1600	sub {
1041	# accept	1601	# accept
1042	if ($$rbuf =~ $accept) {	1602	if ($$rbuf =~ $accept) {
1043	$data .= substr $$rbuf, 0, $+[0], "";	1603	$data .= substr $$rbuf, 0, $+[0], "";
1044	$cb->($self, $data);	1604	$cb->($_[0], $data);
1045	return 1;	1605	return 1;
1046	}	1606	}
1047		1607
1048	# reject	1608	# reject
1049	if ($reject && $$rbuf =~ $reject) {	1609	if ($reject && $$rbuf =~ $reject) {
1050	$self->_error (&Errno::EBADMSG);	1610	$_[0]->_error (Errno::EBADMSG);
1051	}	1611	}
1052		1612
1053	# skip	1613	# skip
1054	if ($skip && $$rbuf =~ $skip) {	1614	if ($skip && $$rbuf =~ $skip) {
1055	$data .= substr $$rbuf, 0, $+[0], "";	1615	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1071	my ($self, $cb) = @_;	1631	my ($self, $cb) = @_;
1072		1632
1073	sub {	1633	sub {
1074	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1634	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1075	if ($_[0]{rbuf} =~ /[^0-9]/) {	1635	if ($_[0]{rbuf} =~ /[^0-9]/) {
1076	$self->_error (&Errno::EBADMSG);	1636	$_[0]->_error (Errno::EBADMSG);
1077	}	1637	}
1078	return;	1638	return;
1079	}	1639	}
1080		1640
1081	my $len = $1;	1641	my $len = $1;
1082		1642
1083	$self->unshift_read (chunk => $len, sub {	1643	$_[0]->unshift_read (chunk => $len, sub {
1084	my $string = $_[1];	1644	my $string = $_[1];
1085	$_[0]->unshift_read (chunk => 1, sub {	1645	$_[0]->unshift_read (chunk => 1, sub {
1086	if ($_[1] eq ",") {	1646	if ($_[1] eq ",") {
1087	$cb->($_[0], $string);	1647	$cb->($_[0], $string);
1088	} else {	1648	} else {
1089	$self->_error (&Errno::EBADMSG);	1649	$_[0]->_error (Errno::EBADMSG);
1090	}	1650	}
1091	});	1651	});
1092	});	1652	});
1093		1653
1094	1	1654	1
…		…
1100	An octet string prefixed with an encoded length. The encoding C<$format>	1660	An octet string prefixed with an encoded length. The encoding C<$format>
1101	uses the same format as a Perl C<pack> format, but must specify a single	1661	uses the same format as a Perl C<pack> format, but must specify a single
1102	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1662	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1103	optional C<!>, C<< < >> or C<< > >> modifier).	1663	optional C<!>, C<< < >> or C<< > >> modifier).
1104		1664
1105	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1665	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1666	EPP uses a prefix of C<N> (4 octtes).
1106		1667
1107	Example: read a block of data prefixed by its length in BER-encoded	1668	Example: read a block of data prefixed by its length in BER-encoded
1108	format (very efficient).	1669	format (very efficient).
1109		1670
1110	$handle->push_read (packstring => "w", sub {	1671	$handle->push_read (packstring => "w", sub {
…		…
1140	}	1701	}
1141	};	1702	};
1142		1703
1143	=item json => $cb->($handle, $hash_or_arrayref)	1704	=item json => $cb->($handle, $hash_or_arrayref)
1144		1705
1145	Reads a JSON object or array, decodes it and passes it to the callback.	1706	Reads a JSON object or array, decodes it and passes it to the
		1707	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1146		1708
1147	If a C<json> object was passed to the constructor, then that will be used	1709	If a C<json> object was passed to the constructor, then that will be
1148	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1710	used for the final decode, otherwise it will create a L<JSON::XS> or
		1711	L<JSON::PP> coder object expecting UTF-8.
1149		1712
1150	This read type uses the incremental parser available with JSON version	1713	This read type uses the incremental parser available with JSON version
1151	2.09 (and JSON::XS version 2.2) and above. You have to provide a	1714	2.09 (and JSON::XS version 2.2) and above.
1152	dependency on your own: this module will load the JSON module, but
1153	AnyEvent does not depend on it itself.
1154		1715
1155	Since JSON texts are fully self-delimiting, the C<json> read and write	1716	Since JSON texts are fully self-delimiting, the C<json> read and write
1156	types are an ideal simple RPC protocol: just exchange JSON datagrams. See	1717	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
1157	the C<json> write type description, above, for an actual example.	1718	the C<json> write type description, above, for an actual example.
1158		1719
1159	=cut	1720	=cut
1160		1721
1161	register_read_type json => sub {	1722	register_read_type json => sub {
1162	my ($self, $cb) = @_;	1723	my ($self, $cb) = @_;
1163		1724
1164	require JSON;	1725	my $json = $self->{json} ||= json_coder;
1165		1726
1166	my $data;	1727	my $data;
1167	my $rbuf = \$self->{rbuf};
1168
1169	my $json = $self->{json} ||= JSON->new->utf8;
1170		1728
1171	sub {	1729	sub {
1172	my $ref = $json->incr_parse ($self->{rbuf});	1730	my $ref = eval { $json->incr_parse ($_[0]{rbuf}) };
1173		1731
1174	if ($ref) {	1732	if ($ref) {
1175	$self->{rbuf} = $json->incr_text;	1733	$_[0]{rbuf} = $json->incr_text;
1176	$json->incr_text = "";	1734	$json->incr_text = "";
1177	$cb->($self, $ref);	1735	$cb->($_[0], $ref);
1178		1736
1179	1	1737	1
		1738	} elsif ($@) {
		1739	# error case
		1740	$json->incr_skip;
		1741
		1742	$_[0]{rbuf} = $json->incr_text;
		1743	$json->incr_text = "";
		1744
		1745	$_[0]->_error (Errno::EBADMSG);
		1746
		1747	()
1180	} else {	1748	} else {
1181	$self->{rbuf} = "";	1749	$_[0]{rbuf} = "";
		1750
		1751	()
		1752	}
		1753	}
		1754	};
		1755
		1756	=item cbor => $cb->($handle, $scalar)
		1757
		1758	Reads a CBOR value, decodes it and passes it to the callback. When a parse
		1759	error occurs, an C<EBADMSG> error will be raised.
		1760
		1761	If a L<CBOR::XS> object was passed to the constructor, then that will be
		1762	used for the final decode, otherwise it will create a CBOR coder without
		1763	enabling any options.
		1764
		1765	You have to provide a dependency to L<CBOR::XS> on your own: this module
		1766	will load the L<CBOR::XS> module, but AnyEvent does not depend on it
		1767	itself.
		1768
		1769	Since CBOR values are fully self-delimiting, the C<cbor> read and write
		1770	types are an ideal simple RPC protocol: just exchange CBOR datagrams. See
		1771	the C<cbor> write type description, above, for an actual example.
		1772
		1773	=cut
		1774
		1775	register_read_type cbor => sub {
		1776	my ($self, $cb) = @_;
		1777
		1778	my $cbor = $self->{cbor} ||= cbor_coder;
		1779
		1780	my $data;
		1781
		1782	sub {
		1783	my (@value) = eval { $cbor->incr_parse ($_[0]{rbuf}) };
		1784
		1785	if (@value) {
		1786	$cb->($_[0], @value);
		1787
		1788	1
		1789	} elsif ($@) {
		1790	# error case
		1791	$cbor->incr_reset;
		1792
		1793	$_[0]->_error (Errno::EBADMSG);
		1794
		1795	()
		1796	} else {
1182	()	1797	()
1183	}	1798	}
1184	}	1799	}
1185	};	1800	};
1186		1801
…		…
1195	=cut	1810	=cut
1196		1811
1197	register_read_type storable => sub {	1812	register_read_type storable => sub {
1198	my ($self, $cb) = @_;	1813	my ($self, $cb) = @_;
1199		1814
1200	require Storable;	1815	require Storable unless $Storable::VERSION;
1201		1816
1202	sub {	1817	sub {
1203	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1818	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1204	defined (my $len = eval { unpack "w", $_[0]{rbuf} })	1819	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
1205	or return;	1820	or return;
…		…
1208		1823
1209	# bypass unshift if we already have the remaining chunk	1824	# bypass unshift if we already have the remaining chunk
1210	if ($format + $len <= length $_[0]{rbuf}) {	1825	if ($format + $len <= length $_[0]{rbuf}) {
1211	my $data = substr $_[0]{rbuf}, $format, $len;	1826	my $data = substr $_[0]{rbuf}, $format, $len;
1212	substr $_[0]{rbuf}, 0, $format + $len, "";	1827	substr $_[0]{rbuf}, 0, $format + $len, "";
		1828
1213	$cb->($_[0], Storable::thaw ($data));	1829	eval { $cb->($_[0], Storable::thaw ($data)); 1 }
		1830	or return $_[0]->_error (Errno::EBADMSG);
1214	} else {	1831	} else {
1215	# remove prefix	1832	# remove prefix
1216	substr $_[0]{rbuf}, 0, $format, "";	1833	substr $_[0]{rbuf}, 0, $format, "";
1217		1834
1218	# read remaining chunk	1835	# read remaining chunk
1219	$_[0]->unshift_read (chunk => $len, sub {	1836	$_[0]->unshift_read (chunk => $len, sub {
1220	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1837	eval { $cb->($_[0], Storable::thaw ($_[1])); 1 }
1221	$cb->($_[0], $ref);
1222	} else {
1223	$self->_error (&Errno::EBADMSG);	1838	or $_[0]->_error (Errno::EBADMSG);
1224	}
1225	});	1839	});
1226	}	1840	}
1227		1841
1228	1	1842	1
1229	}	1843	}
1230	};	1844	};
1231		1845
		1846	=item tls_detect => $cb->($handle, $detect, $major, $minor)
		1847
		1848	Checks the input stream for a valid SSL or TLS handshake TLSPaintext
		1849	record without consuming anything. Only SSL version 3 or higher
		1850	is handled, up to the fictituous protocol 4.x (but both SSL3+ and
		1851	SSL2-compatible framing is supported).
		1852
		1853	If it detects that the input data is likely TLS, it calls the callback
		1854	with a true value for C<$detect> and the (on-wire) TLS version as second
		1855	and third argument (C<$major> is C<3>, and C<$minor> is 0..3 for SSL
		1856	3.0, TLS 1.0, 1.1 and 1.2, respectively). If it detects the input to
		1857	be definitely not TLS, it calls the callback with a false value for
		1858	C<$detect>.
		1859
		1860	The callback could use this information to decide whether or not to start
		1861	TLS negotiation.
		1862
		1863	In all cases the data read so far is passed to the following read
		1864	handlers.
		1865
		1866	Usually you want to use the C<tls_autostart> read type instead.
		1867
		1868	If you want to design a protocol that works in the presence of TLS
		1869	dtection, make sure that any non-TLS data doesn't start with the octet 22
		1870	(ASCII SYN, 16 hex) or 128-255 (i.e. highest bit set). The checks this
		1871	read type does are a bit more strict, but might losen in the future to
		1872	accomodate protocol changes.
		1873
		1874	This read type does not rely on L<AnyEvent::TLS> (and thus, not on
		1875	L<Net::SSLeay>).
		1876
		1877	=item tls_autostart => $tls[, $tls_ctx]
		1878
		1879	Tries to detect a valid SSL or TLS handshake. If one is detected, it tries
		1880	to start tls by calling C<starttls> with the given arguments.
		1881
		1882	In practise, C<$tls> must be C<accept>, or a Net::SSLeay context that has
		1883	been configured to accept, as servers do not normally send a handshake on
		1884	their own and ths cannot be detected in this way.
		1885
		1886	See C<tls_detect> above for more details.
		1887
		1888	Example: give the client a chance to start TLS before accepting a text
		1889	line.
		1890
		1891	$hdl->push_read (tls_detect => "accept");
		1892	$hdl->push_read (line => sub {
		1893	print "received ", ($_[0]{tls} ? "encrypted" : "cleartext"), " <$_[1]>\n";
		1894	});
		1895
		1896	=cut
		1897
		1898	register_read_type tls_detect => sub {
		1899	my ($self, $cb) = @_;
		1900
		1901	sub {
		1902	# this regex matches a full or partial tls record
		1903	if (
		1904	# ssl3+: type(22=handshake) major(=3) minor(any) length_hi
		1905	$self->{rbuf} =~ /^(?:\z| \x16 (\z| [\x03\x04] (?:\z| . (?:\z| [\x00-\x40] ))))/xs
		1906	# ssl2 comapatible: len_hi len_lo type(1) major minor dummy(forlength)
		1907	or $self->{rbuf} =~ /^(?:\z| [\x80-\xff] (?:\z| . (?:\z| \x01 (\z| [\x03\x04] (?:\z| . (?:\z| . ))))))/xs
		1908	) {
		1909	return if 3 != length $1; # partial match, can't decide yet
		1910
		1911	# full match, valid TLS record
		1912	my ($major, $minor) = unpack "CC", $1;
		1913	$cb->($self, "accept", $major + $minor * 0.1);
		1914	} else {
		1915	# mismatch == guaranteed not TLS
		1916	$cb->($self, undef);
		1917	}
		1918
		1919	1
		1920	}
		1921	};
		1922
		1923	register_read_type tls_autostart => sub {
		1924	my ($self, @tls) = @_;
		1925
		1926	$RH{tls_detect}($self, sub {
		1927	return unless $_[1];
		1928	$_[0]->starttls (@tls);
		1929	})
		1930	};
		1931
1232	=back	1932	=back
1233		1933
1234	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1934	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1235		1935
1236	This function (not method) lets you add your own types to C<push_read>.	1936	Instead of one of the predefined types, you can also specify the name
		1937	of a package. AnyEvent will try to load the package and then expects to
		1938	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1939	progressively tries to load the parent package until it either finds the
		1940	function (good) or runs out of packages (bad).
1237		1941
1238	Whenever the given C<type> is used, C<push_read> will invoke the code	1942	Whenever this type is used, C<push_read> will invoke the function with the
1239	reference with the handle object, the callback and the remaining	1943	handle object, the original callback and the remaining arguments.
1240	arguments.
1241		1944
1242	The code reference is supposed to return a callback (usually a closure)	1945	The function is supposed to return a callback (usually a closure) that
1243	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1946	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1947	mentally treat the function as a "configurable read type to read callback"
		1948	converter.
1244		1949
1245	It should invoke the passed callback when it is done reading (remember to	1950	It should invoke the original callback when it is done reading (remember
1246	pass C<$handle> as first argument as all other callbacks do that).	1951	to pass C<$handle> as first argument as all other callbacks do that,
		1952	although there is no strict requirement on this).
1247		1953
1248	Note that this is a function, and all types registered this way will be
1249	global, so try to use unique names.
1250
1251	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1954	For examples, see the source of this module (F<perldoc -m
1252	search for C<register_read_type>)).	1955	AnyEvent::Handle>, search for C<register_read_type>)).
1253		1956
1254	=item $handle->stop_read	1957	=item $handle->stop_read
1255		1958
1256	=item $handle->start_read	1959	=item $handle->start_read
1257		1960
…		…
1263	Note that AnyEvent::Handle will automatically C<start_read> for you when	1966	Note that AnyEvent::Handle will automatically C<start_read> for you when
1264	you change the C<on_read> callback or push/unshift a read callback, and it	1967	you change the C<on_read> callback or push/unshift a read callback, and it
1265	will automatically C<stop_read> for you when neither C<on_read> is set nor	1968	will automatically C<stop_read> for you when neither C<on_read> is set nor
1266	there are any read requests in the queue.	1969	there are any read requests in the queue.
1267		1970
		1971	In older versions of this module (<= 5.3), these methods had no effect,
		1972	as TLS does not support half-duplex connections. In current versions they
		1973	work as expected, as this behaviour is required to avoid certain resource
		1974	attacks, where the program would be forced to read (and buffer) arbitrary
		1975	amounts of data before being able to send some data. The drawback is that
		1976	some readings of the the SSL/TLS specifications basically require this
		1977	attack to be working, as SSL/TLS implementations might stall sending data
		1978	during a rehandshake.
		1979
		1980	As a guideline, during the initial handshake, you should not stop reading,
		1981	and as a client, it might cause problems, depending on your application.
		1982
1268	=cut	1983	=cut
1269		1984
1270	sub stop_read {	1985	sub stop_read {
1271	my ($self) = @_;	1986	my ($self) = @_;
1272		1987
…		…
1274	}	1989	}
1275		1990
1276	sub start_read {	1991	sub start_read {
1277	my ($self) = @_;	1992	my ($self) = @_;
1278		1993
1279	unless ($self->{_rw} || $self->{_eof}) {	1994	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1280	Scalar::Util::weaken $self;	1995	Scalar::Util::weaken $self;
1281		1996
1282	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1997	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1283	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1998	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1284	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1999	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1285		2000
1286	if ($len > 0) {	2001	if ($len > 0) {
1287	$self->{_activity} = AnyEvent->now;	2002	$self->{_activity} = $self->{_ractivity} = AE::now;
1288		2003
1289	$self->{filter_r}	2004	if ($self->{tls}) {
1290	? $self->{filter_r}($self, $rbuf)	2005	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1291	: $self->{_in_drain} || $self->_drain_rbuf;	2006
		2007	&_dotls ($self);
		2008	} else {
		2009	$self->_drain_rbuf;
		2010	}
		2011
		2012	if ($len == $self->{read_size}) {
		2013	$self->{read_size} *= 2;
		2014	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		2015	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		2016	}
1292		2017
1293	} elsif (defined $len) {	2018	} elsif (defined $len) {
1294	delete $self->{_rw};	2019	delete $self->{_rw};
1295	$self->{_eof} = 1;	2020	$self->{_eof} = 1;
1296	$self->_drain_rbuf unless $self->{_in_drain};	2021	$self->_drain_rbuf;
1297		2022
1298	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	2023	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1299	return $self->_error ($!, 1);	2024	return $self->_error ($!, 1);
1300	}	2025	}
1301	});	2026	};
1302	}	2027	}
1303	}	2028	}
1304		2029
		2030	our $ERROR_SYSCALL;
		2031	our $ERROR_WANT_READ;
		2032
		2033	sub _tls_error {
		2034	my ($self, $err) = @_;
		2035
		2036	return $self->_error ($!, 1)
		2037	if $err == Net::SSLeay::ERROR_SYSCALL ();
		2038
		2039	my $err = Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		2040
		2041	# reduce error string to look less scary
		2042	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		2043
		2044	if ($self->{_on_starttls}) {
		2045	(delete $self->{_on_starttls})->($self, undef, $err);
		2046	&_freetls;
		2047	} else {
		2048	&_freetls;
		2049	$self->_error (Errno::EPROTO, 1, $err);
		2050	}
		2051	}
		2052
		2053	# poll the write BIO and send the data if applicable
		2054	# also decode read data if possible
		2055	# this is basiclaly our TLS state machine
		2056	# more efficient implementations are possible with openssl,
		2057	# but not with the buggy and incomplete Net::SSLeay.
1305	sub _dotls {	2058	sub _dotls {
1306	my ($self) = @_;	2059	my ($self) = @_;
1307		2060
1308	my $buf;	2061	my $tmp;
1309		2062
1310	if (length $self->{_tls_wbuf}) {	2063	while (length $self->{_tls_wbuf}) {
1311	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	2064	if (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) <= 0) {
1312	substr $self->{_tls_wbuf}, 0, $len, "";	2065	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		2066
		2067	return $self->_tls_error ($tmp)
		2068	if $tmp != $ERROR_WANT_READ
		2069	&& ($tmp != $ERROR_SYSCALL || $!);
		2070
		2071	last;
1313	}	2072	}
1314	}
1315		2073
		2074	substr $self->{_tls_wbuf}, 0, $tmp, "";
		2075	}
		2076
		2077	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		2078	unless (length $tmp) {
		2079	$self->{_on_starttls}
		2080	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		2081	&_freetls;
		2082
		2083	if ($self->{on_stoptls}) {
		2084	$self->{on_stoptls}($self);
		2085	return;
		2086	} else {
		2087	# let's treat SSL-eof as we treat normal EOF
		2088	delete $self->{_rw};
		2089	$self->{_eof} = 1;
		2090	}
		2091	}
		2092
		2093	$self->{_tls_rbuf} .= $tmp;
		2094	$self->_drain_rbuf;
		2095	$self->{tls} or return; # tls session might have gone away in callback
		2096	}
		2097
		2098	$tmp = Net::SSLeay::get_error ($self->{tls}, -1); # -1 is not neccessarily correct, but Net::SSLeay doesn't tell us
		2099	return $self->_tls_error ($tmp)
		2100	if $tmp != $ERROR_WANT_READ
		2101	&& ($tmp != $ERROR_SYSCALL || $!);
		2102
1316	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	2103	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1317	$self->{wbuf} .= $buf;	2104	$self->{wbuf} .= $tmp;
1318	$self->_drain_wbuf;	2105	$self->_drain_wbuf;
		2106	$self->{tls} or return; # tls session might have gone away in callback
1319	}	2107	}
1320		2108
1321	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	2109	$self->{_on_starttls}
1322	if (length $buf) {	2110	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1323	$self->{rbuf} .= $buf;	2111	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1324	$self->_drain_rbuf unless $self->{_in_drain};
1325	} else {
1326	# let's treat SSL-eof as we treat normal EOF
1327	$self->{_eof} = 1;
1328	$self->_shutdown;
1329	return;
1330	}
1331	}
1332
1333	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1334
1335	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1336	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1337	return $self->_error ($!, 1);
1338	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1339	return $self->_error (&Errno::EIO, 1);
1340	}
1341
1342	# all others are fine for our purposes
1343	}
1344	}	2112	}
1345		2113
1346	=item $handle->starttls ($tls[, $tls_ctx])	2114	=item $handle->starttls ($tls[, $tls_ctx])
1347		2115
1348	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	2116	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1349	object is created, you can also do that at a later time by calling	2117	object is created, you can also do that at a later time by calling
1350	C<starttls>.	2118	C<starttls>. See the C<tls> constructor argument for general info.
		2119
		2120	Starting TLS is currently an asynchronous operation - when you push some
		2121	write data and then call C<< ->starttls >> then TLS negotiation will start
		2122	immediately, after which the queued write data is then sent. This might
		2123	change in future versions, so best make sure you have no outstanding write
		2124	data when calling this method.
1351		2125
1352	The first argument is the same as the C<tls> constructor argument (either	2126	The first argument is the same as the C<tls> constructor argument (either
1353	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	2127	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1354		2128
1355	The second argument is the optional C<Net::SSLeay::CTX> object that is	2129	The second argument is the optional C<AnyEvent::TLS> object that is used
1356	used when AnyEvent::Handle has to create its own TLS connection object.	2130	when AnyEvent::Handle has to create its own TLS connection object, or
		2131	a hash reference with C<< key => value >> pairs that will be used to
		2132	construct a new context.
1357		2133
1358	The TLS connection object will end up in C<< $handle->{tls} >> after this	2134	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1359	call and can be used or changed to your liking. Note that the handshake	2135	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1360	might have already started when this function returns.	2136	changed to your liking. Note that the handshake might have already started
		2137	when this function returns.
1361		2138
		2139	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		2140	handshakes on the same stream. It is best to not attempt to use the
		2141	stream after stopping TLS.
		2142
		2143	This method may invoke callbacks (and therefore the handle might be
		2144	destroyed after it returns).
		2145
1362	=cut	2146	=cut
		2147
		2148	our %TLS_CACHE; #TODO not yet documented, should we?
1363		2149
1364	sub starttls {	2150	sub starttls {
1365	my ($self, $ssl, $ctx) = @_;	2151	my ($self, $tls, $ctx) = @_;
1366		2152
1367	$self->stoptls;	2153	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		2154	if $self->{tls};
1368		2155
1369	if ($ssl eq "accept") {	2156	unless (defined $AnyEvent::TLS::VERSION) {
1370	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	2157	eval {
1371	Net::SSLeay::set_accept_state ($ssl);	2158	require Net::SSLeay;
1372	} elsif ($ssl eq "connect") {	2159	require AnyEvent::TLS;
1373	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	2160	1
1374	Net::SSLeay::set_connect_state ($ssl);	2161	} or return $self->_error (Errno::EPROTO, 1, "TLS support not available on this system");
		2162	}
		2163
		2164	$self->{tls} = $tls;
		2165	$self->{tls_ctx} = $ctx if @_ > 2;
		2166
		2167	return unless $self->{fh};
		2168
		2169	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		2170	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		2171
		2172	$tls = delete $self->{tls};
		2173	$ctx = $self->{tls_ctx};
		2174
		2175	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		2176
		2177	if ("HASH" eq ref $ctx) {
		2178	if ($ctx->{cache}) {
		2179	my $key = $ctx+0;
		2180	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		2181	} else {
		2182	$ctx = new AnyEvent::TLS %$ctx;
		2183	}
		2184	}
1375	}	2185
1376		2186	$self->{tls_ctx} = $ctx || TLS_CTX ();
1377	$self->{tls} = $ssl;	2187	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1378		2188
1379	# basically, this is deep magic (because SSL_read should have the same issues)	2189	# basically, this is deep magic (because SSL_read should have the same issues)
1380	# but the openssl maintainers basically said: "trust us, it just works".	2190	# but the openssl maintainers basically said: "trust us, it just works".
1381	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	2191	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1382	# and mismaintained ssleay-module doesn't even offer them).	2192	# and mismaintained ssleay-module doesn't even offer them).
1383	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	2193	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
1384	#	2194	#
1385	# in short: this is a mess.	2195	# in short: this is a mess.
1386	#	2196	#
1387	# note that we do not try to kepe the length constant between writes as we are required to do.	2197	# note that we do not try to keep the length constant between writes as we are required to do.
1388	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	2198	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1389	# and we drive openssl fully in blocking mode here.	2199	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		2200	# have identity issues in that area.
1390	Net::SSLeay::CTX_set_mode ($self->{tls},	2201	# Net::SSLeay::CTX_set_mode ($ssl,
1391	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	2202	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1392	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	2203	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		2204	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1393		2205
1394	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2206	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1395	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2207	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1396		2208
		2209	Net::SSLeay::BIO_write ($self->{_rbio}, $self->{rbuf});
		2210	$self->{rbuf} = "";
		2211
1397	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	2212	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1398		2213
1399	$self->{filter_w} = sub {	2214	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1400	$_[0]{_tls_wbuf} .= ${$_[1]};	2215	if $self->{on_starttls};
1401	&_dotls;	2216
1402	};	2217	&_dotls; # need to trigger the initial handshake
1403	$self->{filter_r} = sub {	2218	$self->start_read; # make sure we actually do read
1404	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1405	&_dotls;
1406	};
1407	}	2219	}
1408		2220
1409	=item $handle->stoptls	2221	=item $handle->stoptls
1410		2222
1411	Destroys the SSL connection, if any. Partial read or write data will be	2223	Shuts down the SSL connection - this makes a proper EOF handshake by
1412	lost.	2224	sending a close notify to the other side, but since OpenSSL doesn't
		2225	support non-blocking shut downs, it is not guaranteed that you can re-use
		2226	the stream afterwards.
		2227
		2228	This method may invoke callbacks (and therefore the handle might be
		2229	destroyed after it returns).
1413		2230
1414	=cut	2231	=cut
1415		2232
1416	sub stoptls {	2233	sub stoptls {
1417	my ($self) = @_;	2234	my ($self) = @_;
1418		2235
1419	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	2236	if ($self->{tls} && $self->{fh}) {
		2237	Net::SSLeay::shutdown ($self->{tls});
1420		2238
1421	delete $self->{_rbio};	2239	&_dotls;
1422	delete $self->{_wbio};	2240
1423	delete $self->{_tls_wbuf};	2241	# # we don't give a shit. no, we do, but we can't. no...#d#
1424	delete $self->{filter_r};	2242	# # we, we... have to use openssl :/#d#
1425	delete $self->{filter_w};	2243	# &_freetls;#d#
		2244	}
1426	}	2245	}
		2246
		2247	sub _freetls {
		2248	my ($self) = @_;
		2249
		2250	return unless $self->{tls};
		2251
		2252	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2253	if $self->{tls} > 0;
		2254
		2255	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
		2256	}
		2257
		2258	=item $handle->resettls
		2259
		2260	This rarely-used method simply resets and TLS state on the handle, usually
		2261	causing data loss.
		2262
		2263	One case where it may be useful is when you want to skip over the data in
		2264	the stream but you are not interested in interpreting it, so data loss is
		2265	no concern.
		2266
		2267	=cut
		2268
		2269	*resettls = \&_freetls;
1427		2270
1428	sub DESTROY {	2271	sub DESTROY {
1429	my $self = shift;	2272	my ($self) = @_;
1430		2273
1431	$self->stoptls;	2274	&_freetls;
1432		2275
1433	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2276	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1434		2277
1435	if ($linger && length $self->{wbuf}) {	2278	if ($linger && length $self->{wbuf} && $self->{fh}) {
1436	my $fh = delete $self->{fh};	2279	my $fh = delete $self->{fh};
1437	my $wbuf = delete $self->{wbuf};	2280	my $wbuf = delete $self->{wbuf};
1438		2281
1439	my @linger;	2282	my @linger;
1440		2283
1441	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2284	push @linger, AE::io $fh, 1, sub {
1442	my $len = syswrite $fh, $wbuf, length $wbuf;	2285	my $len = syswrite $fh, $wbuf, length $wbuf;
1443		2286
1444	if ($len > 0) {	2287	if ($len > 0) {
1445	substr $wbuf, 0, $len, "";	2288	substr $wbuf, 0, $len, "";
1446	} else {	2289	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK)) {
1447	@linger = (); # end	2290	@linger = (); # end
1448	}	2291	}
		2292	};
		2293	push @linger, AE::timer $linger, 0, sub {
		2294	@linger = ();
		2295	};
		2296	}
		2297	}
		2298
		2299	=item $handle->destroy
		2300
		2301	Shuts down the handle object as much as possible - this call ensures that
		2302	no further callbacks will be invoked and as many resources as possible
		2303	will be freed. Any method you will call on the handle object after
		2304	destroying it in this way will be silently ignored (and it will return the
		2305	empty list).
		2306
		2307	Normally, you can just "forget" any references to an AnyEvent::Handle
		2308	object and it will simply shut down. This works in fatal error and EOF
		2309	callbacks, as well as code outside. It does I<NOT> work in a read or write
		2310	callback, so when you want to destroy the AnyEvent::Handle object from
		2311	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		2312	that case.
		2313
		2314	Destroying the handle object in this way has the advantage that callbacks
		2315	will be removed as well, so if those are the only reference holders (as
		2316	is common), then one doesn't need to do anything special to break any
		2317	reference cycles.
		2318
		2319	The handle might still linger in the background and write out remaining
		2320	data, as specified by the C<linger> option, however.
		2321
		2322	=cut
		2323
		2324	sub destroy {
		2325	my ($self) = @_;
		2326
		2327	$self->DESTROY;
		2328	%$self = ();
		2329	bless $self, "AnyEvent::Handle::destroyed";
		2330	}
		2331
		2332	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2333	#nop
		2334	}
		2335
		2336	=item $handle->destroyed
		2337
		2338	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2339	->destroy >>, true otherwise.
		2340
		2341	Can be useful to decide whether the handle is still valid after some
		2342	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2343	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2344	can destroy the handle, so work can be avoided by checking sometimes:
		2345
		2346	$hdl->starttls ("accept");
		2347	return if $hdl->destroyed;
		2348	$hdl->push_write (...
		2349
		2350	Note that the call to C<push_write> will silently be ignored if the handle
		2351	has been destroyed, so often you can just ignore the possibility of the
		2352	handle being destroyed.
		2353
		2354	=cut
		2355
		2356	sub destroyed { 0 }
		2357	sub AnyEvent::Handle::destroyed::destroyed { 1 }
		2358
		2359	=item AnyEvent::Handle::TLS_CTX
		2360
		2361	This function creates and returns the AnyEvent::TLS object used by default
		2362	for TLS mode.
		2363
		2364	The context is created by calling L<AnyEvent::TLS> without any arguments.
		2365
		2366	=cut
		2367
		2368	our $TLS_CTX;
		2369
		2370	sub TLS_CTX() {
		2371	$TLS_CTX ||= do {
		2372	require AnyEvent::TLS;
		2373
		2374	new AnyEvent::TLS
		2375	}
		2376	}
		2377
		2378	=back
		2379
		2380
		2381	=head1 NONFREQUENTLY ASKED QUESTIONS
		2382
		2383	=over 4
		2384
		2385	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2386	still get further invocations!
		2387
		2388	That's because AnyEvent::Handle keeps a reference to itself when handling
		2389	read or write callbacks.
		2390
		2391	It is only safe to "forget" the reference inside EOF or error callbacks,
		2392	from within all other callbacks, you need to explicitly call the C<<
		2393	->destroy >> method.
		2394
		2395	=item Why is my C<on_eof> callback never called?
		2396
		2397	Probably because your C<on_error> callback is being called instead: When
		2398	you have outstanding requests in your read queue, then an EOF is
		2399	considered an error as you clearly expected some data.
		2400
		2401	To avoid this, make sure you have an empty read queue whenever your handle
		2402	is supposed to be "idle" (i.e. connection closes are O.K.). You can set
		2403	an C<on_read> handler that simply pushes the first read requests in the
		2404	queue.
		2405
		2406	See also the next question, which explains this in a bit more detail.
		2407
		2408	=item How can I serve requests in a loop?
		2409
		2410	Most protocols consist of some setup phase (authentication for example)
		2411	followed by a request handling phase, where the server waits for requests
		2412	and handles them, in a loop.
		2413
		2414	There are two important variants: The first (traditional, better) variant
		2415	handles requests until the server gets some QUIT command, causing it to
		2416	close the connection first (highly desirable for a busy TCP server). A
		2417	client dropping the connection is an error, which means this variant can
		2418	detect an unexpected detection close.
		2419
		2420	To handle this case, always make sure you have a non-empty read queue, by
		2421	pushing the "read request start" handler on it:
		2422
		2423	# we assume a request starts with a single line
		2424	my @start_request; @start_request = (line => sub {
		2425	my ($hdl, $line) = @_;
		2426
		2427	... handle request
		2428
		2429	# push next request read, possibly from a nested callback
		2430	$hdl->push_read (@start_request);
		2431	});
		2432
		2433	# auth done, now go into request handling loop
		2434	# now push the first @start_request
		2435	$hdl->push_read (@start_request);
		2436
		2437	By always having an outstanding C<push_read>, the handle always expects
		2438	some data and raises the C<EPIPE> error when the connction is dropped
		2439	unexpectedly.
		2440
		2441	The second variant is a protocol where the client can drop the connection
		2442	at any time. For TCP, this means that the server machine may run out of
		2443	sockets easier, and in general, it means you cannot distinguish a protocl
		2444	failure/client crash from a normal connection close. Nevertheless, these
		2445	kinds of protocols are common (and sometimes even the best solution to the
		2446	problem).
		2447
		2448	Having an outstanding read request at all times is possible if you ignore
		2449	C<EPIPE> errors, but this doesn't help with when the client drops the
		2450	connection during a request, which would still be an error.
		2451
		2452	A better solution is to push the initial request read in an C<on_read>
		2453	callback. This avoids an error, as when the server doesn't expect data
		2454	(i.e. is idly waiting for the next request, an EOF will not raise an
		2455	error, but simply result in an C<on_eof> callback. It is also a bit slower
		2456	and simpler:
		2457
		2458	# auth done, now go into request handling loop
		2459	$hdl->on_read (sub {
		2460	my ($hdl) = @_;
		2461
		2462	# called each time we receive data but the read queue is empty
		2463	# simply start read the request
		2464
		2465	$hdl->push_read (line => sub {
		2466	my ($hdl, $line) = @_;
		2467
		2468	... handle request
		2469
		2470	# do nothing special when the request has been handled, just
		2471	# let the request queue go empty.
1449	});	2472	});
1450	push @linger, AnyEvent->timer (after => $linger, cb => sub {
1451	@linger = ();
1452	});	2473	});
		2474
		2475	=item I get different callback invocations in TLS mode/Why can't I pause
		2476	reading?
		2477
		2478	Unlike, say, TCP, TLS connections do not consist of two independent
		2479	communication channels, one for each direction. Or put differently, the
		2480	read and write directions are not independent of each other: you cannot
		2481	write data unless you are also prepared to read, and vice versa.
		2482
		2483	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
		2484	callback invocations when you are not expecting any read data - the reason
		2485	is that AnyEvent::Handle always reads in TLS mode.
		2486
		2487	During the connection, you have to make sure that you always have a
		2488	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2489	connection (or when you no longer want to use it) you can call the
		2490	C<destroy> method.
		2491
		2492	=item How do I read data until the other side closes the connection?
		2493
		2494	If you just want to read your data into a perl scalar, the easiest way
		2495	to achieve this is by setting an C<on_read> callback that does nothing,
		2496	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2497	will be in C<$_[0]{rbuf}>:
		2498
		2499	$handle->on_read (sub { });
		2500	$handle->on_eof (undef);
		2501	$handle->on_error (sub {
		2502	my $data = delete $_[0]{rbuf};
		2503	});
		2504
		2505	Note that this example removes the C<rbuf> member from the handle object,
		2506	which is not normally allowed by the API. It is expressly permitted in
		2507	this case only, as the handle object needs to be destroyed afterwards.
		2508
		2509	The reason to use C<on_error> is that TCP connections, due to latencies
		2510	and packets loss, might get closed quite violently with an error, when in
		2511	fact all data has been received.
		2512
		2513	It is usually better to use acknowledgements when transferring data,
		2514	to make sure the other side hasn't just died and you got the data
		2515	intact. This is also one reason why so many internet protocols have an
		2516	explicit QUIT command.
		2517
		2518	=item I don't want to destroy the handle too early - how do I wait until
		2519	all data has been written?
		2520
		2521	After writing your last bits of data, set the C<on_drain> callback
		2522	and destroy the handle in there - with the default setting of
		2523	C<low_water_mark> this will be called precisely when all data has been
		2524	written to the socket:
		2525
		2526	$handle->push_write (...);
		2527	$handle->on_drain (sub {
		2528	AE::log debug => "All data submitted to the kernel.";
		2529	undef $handle;
		2530	});
		2531
		2532	If you just want to queue some data and then signal EOF to the other side,
		2533	consider using C<< ->push_shutdown >> instead.
		2534
		2535	=item I want to contact a TLS/SSL server, I don't care about security.
		2536
		2537	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2538	connect to it and then create the AnyEvent::Handle with the C<tls>
		2539	parameter:
		2540
		2541	tcp_connect $host, $port, sub {
		2542	my ($fh) = @_;
		2543
		2544	my $handle = new AnyEvent::Handle
		2545	fh => $fh,
		2546	tls => "connect",
		2547	on_error => sub { ... };
		2548
		2549	$handle->push_write (...);
1453	}	2550	};
1454	}
1455		2551
1456	=item AnyEvent::Handle::TLS_CTX	2552	=item I want to contact a TLS/SSL server, I do care about security.
1457		2553
1458	This function creates and returns the Net::SSLeay::CTX object used by	2554	Then you should additionally enable certificate verification, including
1459	default for TLS mode.	2555	peername verification, if the protocol you use supports it (see
		2556	L<AnyEvent::TLS>, C<verify_peername>).
1460		2557
1461	The context is created like this:	2558	E.g. for HTTPS:
1462		2559
1463	Net::SSLeay::load_error_strings;	2560	tcp_connect $host, $port, sub {
1464	Net::SSLeay::SSLeay_add_ssl_algorithms;	2561	my ($fh) = @_;
1465	Net::SSLeay::randomize;
1466		2562
1467	my $CTX = Net::SSLeay::CTX_new;	2563	my $handle = new AnyEvent::Handle
		2564	fh => $fh,
		2565	peername => $host,
		2566	tls => "connect",
		2567	tls_ctx => { verify => 1, verify_peername => "https" },
		2568	...
1468		2569
1469	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL	2570	Note that you must specify the hostname you connected to (or whatever
		2571	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2572	peername verification will be done.
1470		2573
1471	=cut	2574	The above will use the system-dependent default set of trusted CA
		2575	certificates. If you want to check against a specific CA, add the
		2576	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
1472		2577
1473	our $TLS_CTX;	2578	tls_ctx => {
		2579	verify => 1,
		2580	verify_peername => "https",
		2581	ca_file => "my-ca-cert.pem",
		2582	},
1474		2583
1475	sub TLS_CTX() {	2584	=item I want to create a TLS/SSL server, how do I do that?
1476	$TLS_CTX || do {
1477	require Net::SSLeay;
1478		2585
1479	Net::SSLeay::load_error_strings ();	2586	Well, you first need to get a server certificate and key. You have
1480	Net::SSLeay::SSLeay_add_ssl_algorithms ();	2587	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
1481	Net::SSLeay::randomize ();	2588	self-signed certificate (cheap. check the search engine of your choice,
		2589	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2590	nice program for that purpose).
1482		2591
1483	$TLS_CTX = Net::SSLeay::CTX_new ();	2592	Then create a file with your private key (in PEM format, see
		2593	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2594	file should then look like this:
1484		2595
1485	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());	2596	-----BEGIN RSA PRIVATE KEY-----
		2597	...header data
		2598	... lots of base64'y-stuff
		2599	-----END RSA PRIVATE KEY-----
1486		2600
1487	$TLS_CTX	2601	-----BEGIN CERTIFICATE-----
1488	}	2602	... lots of base64'y-stuff
1489	}	2603	-----END CERTIFICATE-----
		2604
		2605	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2606	specify this file as C<cert_file>:
		2607
		2608	tcp_server undef, $port, sub {
		2609	my ($fh) = @_;
		2610
		2611	my $handle = new AnyEvent::Handle
		2612	fh => $fh,
		2613	tls => "accept",
		2614	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2615	...
		2616
		2617	When you have intermediate CA certificates that your clients might not
		2618	know about, just append them to the C<cert_file>.
1490		2619
1491	=back	2620	=back
1492		2621
1493	=head1 SUBCLASSING AnyEvent::Handle	2622	=head1 SUBCLASSING AnyEvent::Handle
1494		2623
…		…
1513		2642
1514	=item * all members not documented here and not prefixed with an underscore	2643	=item * all members not documented here and not prefixed with an underscore
1515	are free to use in subclasses.	2644	are free to use in subclasses.
1516		2645
1517	Of course, new versions of AnyEvent::Handle may introduce more "public"	2646	Of course, new versions of AnyEvent::Handle may introduce more "public"
1518	member variables, but thats just life, at least it is documented.	2647	member variables, but that's just life. At least it is documented.
1519		2648
1520	=back	2649	=back
1521		2650
1522	=head1 AUTHOR	2651	=head1 AUTHOR
1523		2652
1524	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	2653	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
1525		2654
1526	=cut	2655	=cut
1527		2656
1528	1; # End of AnyEvent::Handle	2657	1
		2658

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines