[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.48 by root, Thu May 29 00:27:06 2008 UTC vs.
Revision 1.88 by root, Thu Aug 21 23:48:35 2008 UTC

…		…
1	package AnyEvent::Handle;	1	package AnyEvent::Handle;
2		2
3	no warnings;	3	no warnings;
4	use strict;	4	use strict qw(subs vars);
5		5
6	use AnyEvent ();	6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);	7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();	8	use Scalar::Util ();
9	use Carp ();	9	use Carp ();
14		14
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		16
17	=cut	17	=cut
18		18
19	our $VERSION = '0.04';	19	our $VERSION = 4.233;
20		20
21	=head1 SYNOPSIS	21	=head1 SYNOPSIS
22		22
23	use AnyEvent;	23	use AnyEvent;
24	use AnyEvent::Handle;	24	use AnyEvent::Handle;
…		…
49		49
50	This module is a helper module to make it easier to do event-based I/O on	50	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	51	filehandles. For utility functions for doing non-blocking connects and accepts
52	on sockets see L<AnyEvent::Util>.	52	on sockets see L<AnyEvent::Util>.
53		53
		54	The L<AnyEvent::Intro> tutorial contains some well-documented
		55	AnyEvent::Handle examples.
		56
54	In the following, when the documentation refers to of "bytes" then this	57	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	58	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	59	treatment of characters applies to this module as well.
57		60
58	All callbacks will be invoked with the handle object as their first	61	All callbacks will be invoked with the handle object as their first
…		…
70		73
71	=item fh => $filehandle [MANDATORY]	74	=item fh => $filehandle [MANDATORY]
72		75
73	The filehandle this L<AnyEvent::Handle> object will operate on.	76	The filehandle this L<AnyEvent::Handle> object will operate on.
74		77
75	NOTE: The filehandle will be set to non-blocking (using	78	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		80	that mode.
77		81
78	=item on_eof => $cb->($handle)	82	=item on_eof => $cb->($handle)
79		83
80	Set the callback to be called on EOF.	84	Set the callback to be called when an end-of-file condition is detected,
		85	i.e. in the case of a socket, when the other side has closed the
		86	connection cleanly.
81		87
		88	For sockets, this just means that the other side has stopped sending data,
		89	you can still try to write data, and, in fact, one can return from the eof
		90	callback and continue writing data, as only the read part has been shut
		91	down.
		92
82	While not mandatory, it is highly recommended to set an eof callback,	93	While not mandatory, it is I<highly> recommended to set an eof callback,
83	otherwise you might end up with a closed socket while you are still	94	otherwise you might end up with a closed socket while you are still
84	waiting for data.	95	waiting for data.
85		96
		97	If an EOF condition has been detected but no C<on_eof> callback has been
		98	set, then a fatal error will be raised with C<$!> set to <0>.
		99
86	=item on_error => $cb->($handle)	100	=item on_error => $cb->($handle, $fatal)
87		101
88	This is the fatal error callback, that is called when, well, a fatal error	102	This is the error callback, which is called when, well, some error
89	occurs, such as not being able to resolve the hostname, failure to connect	103	occured, such as not being able to resolve the hostname, failure to
90	or a read error.	104	connect or a read error.
91		105
92	The object will not be in a usable state when this callback has been	106	Some errors are fatal (which is indicated by C<$fatal> being true). On
93	called.	107	fatal errors the handle object will be shut down and will not be usable
		108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
		109	errors are an EOF condition with active (but unsatisifable) read watchers
		110	(C<EPIPE>) or I/O errors.
		111
		112	Non-fatal errors can be retried by simply returning, but it is recommended
		113	to simply ignore this parameter and instead abondon the handle object
		114	when this callback is invoked. Examples of non-fatal errors are timeouts
		115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
94		116
95	On callback entrance, the value of C<$!> contains the operating system	117	On callback entrance, the value of C<$!> contains the operating system
96	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
97		119
98	The callback should throw an exception. If it returns, then
99	AnyEvent::Handle will C<croak> for you.
100
101	While not mandatory, it is I<highly> recommended to set this callback, as	120	While not mandatory, it is I<highly> recommended to set this callback, as
102	you will not be notified of errors otherwise. The default simply calls	121	you will not be notified of errors otherwise. The default simply calls
103	die.	122	C<croak>.
104		123
105	=item on_read => $cb->($handle)	124	=item on_read => $cb->($handle)
106		125
107	This sets the default read callback, which is called when data arrives	126	This sets the default read callback, which is called when data arrives
108	and no read request is in the queue.	127	and no read request is in the queue (unlike read queue callbacks, this
		128	callback will only be called when at least one octet of data is in the
		129	read buffer).
109		130
110	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
111	method or access the C<$handle->{rbuf}> member directly.	132	method or access the C<$handle->{rbuf}> member directly.
112		133
113	When an EOF condition is detected then AnyEvent::Handle will first try to	134	When an EOF condition is detected then AnyEvent::Handle will first try to
…		…
120	This sets the callback that is called when the write buffer becomes empty	141	This sets the callback that is called when the write buffer becomes empty
121	(or when the callback is set and the buffer is empty already).	142	(or when the callback is set and the buffer is empty already).
122		143
123	To append to the write buffer, use the C<< ->push_write >> method.	144	To append to the write buffer, use the C<< ->push_write >> method.
124		145
		146	This callback is useful when you don't want to put all of your write data
		147	into the queue at once, for example, when you want to write the contents
		148	of some file to the socket you might not want to read the whole file into
		149	memory and push it into the queue, but instead only read more data from
		150	the file when the write queue becomes empty.
		151
125	=item timeout => $fractional_seconds	152	=item timeout => $fractional_seconds
126		153
127	If non-zero, then this enables an "inactivity" timeout: whenever this many	154	If non-zero, then this enables an "inactivity" timeout: whenever this many
128	seconds pass without a successful read or write on the underlying file	155	seconds pass without a successful read or write on the underlying file
129	handle, the C<on_timeout> callback will be invoked (and if that one is	156	handle, the C<on_timeout> callback will be invoked (and if that one is
130	missing, an C<ETIMEDOUT> error will be raised).	157	missing, a non-fatal C<ETIMEDOUT> error will be raised).
131		158
132	Note that timeout processing is also active when you currently do not have	159	Note that timeout processing is also active when you currently do not have
133	any outstanding read or write requests: If you plan to keep the connection	160	any outstanding read or write requests: If you plan to keep the connection
134	idle then you should disable the timout temporarily or ignore the timeout	161	idle then you should disable the timout temporarily or ignore the timeout
135	in the C<on_timeout> callback.	162	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		163	restart the timeout.
136		164
137	Zero (the default) disables this timeout.	165	Zero (the default) disables this timeout.
138		166
139	=item on_timeout => $cb->($handle)	167	=item on_timeout => $cb->($handle)
140		168
…		…
144		172
145	=item rbuf_max => <bytes>	173	=item rbuf_max => <bytes>
146		174
147	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	175	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
148	when the read buffer ever (strictly) exceeds this size. This is useful to	176	when the read buffer ever (strictly) exceeds this size. This is useful to
149	avoid denial-of-service attacks.	177	avoid some forms of denial-of-service attacks.
150		178
151	For example, a server accepting connections from untrusted sources should	179	For example, a server accepting connections from untrusted sources should
152	be configured to accept only so-and-so much data that it cannot act on	180	be configured to accept only so-and-so much data that it cannot act on
153	(for example, when expecting a line, an attacker could send an unlimited	181	(for example, when expecting a line, an attacker could send an unlimited
154	amount of data without a callback ever being called as long as the line	182	amount of data without a callback ever being called as long as the line
155	isn't finished).	183	isn't finished).
156		184
		185	=item autocork => <boolean>
		186
		187	When disabled (the default), then C<push_write> will try to immediately
		188	write the data to the handle, if possible. This avoids having to register
		189	a write watcher and wait for the next event loop iteration, but can
		190	be inefficient if you write multiple small chunks (on the wire, this
		191	disadvantage is usually avoided by your kernel's nagle algorithm, see
		192	C<no_delay>, but this option can save costly syscalls).
		193
		194	When enabled, then writes will always be queued till the next event loop
		195	iteration. This is efficient when you do many small writes per iteration,
		196	but less efficient when you do a single write only per iteration (or when
		197	the write buffer often is full). It also increases write latency.
		198
		199	=item no_delay => <boolean>
		200
		201	When doing small writes on sockets, your operating system kernel might
		202	wait a bit for more data before actually sending it out. This is called
		203	the Nagle algorithm, and usually it is beneficial.
		204
		205	In some situations you want as low a delay as possible, which can be
		206	accomplishd by setting this option to a true value.
		207
		208	The default is your opertaing system's default behaviour (most likely
		209	enabled), this option explicitly enables or disables it, if possible.
		210
157	=item read_size => <bytes>	211	=item read_size => <bytes>
158		212
159	The default read block size (the amount of bytes this module will try to read	213	The default read block size (the amount of bytes this module will
160	during each (loop iteration). Default: C<8192>.	214	try to read during each loop iteration, which affects memory
		215	requirements). Default: C<8192>.
161		216
162	=item low_water_mark => <bytes>	217	=item low_water_mark => <bytes>
163		218
164	Sets the amount of bytes (default: C<0>) that make up an "empty" write	219	Sets the amount of bytes (default: C<0>) that make up an "empty" write
165	buffer: If the write reaches this size or gets even samller it is	220	buffer: If the write reaches this size or gets even samller it is
166	considered empty.	221	considered empty.
167		222
		223	Sometimes it can be beneficial (for performance reasons) to add data to
		224	the write buffer before it is fully drained, but this is a rare case, as
		225	the operating system kernel usually buffers data as well, so the default
		226	is good in almost all cases.
		227
		228	=item linger => <seconds>
		229
		230	If non-zero (default: C<3600>), then the destructor of the
		231	AnyEvent::Handle object will check whether there is still outstanding
		232	write data and will install a watcher that will write this data to the
		233	socket. No errors will be reported (this mostly matches how the operating
		234	system treats outstanding data at socket close time).
		235
		236	This will not work for partial TLS data that could not be encoded
		237	yet. This data will be lost.
		238
168	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object	239	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
169		240
170	When this parameter is given, it enables TLS (SSL) mode, that means it	241	When this parameter is given, it enables TLS (SSL) mode, that means
171	will start making tls handshake and will transparently encrypt/decrypt	242	AnyEvent will start a TLS handshake as soon as the conenction has been
172	data.	243	established and will transparently encrypt/decrypt data afterwards.
173		244
174	TLS mode requires Net::SSLeay to be installed (it will be loaded	245	TLS mode requires Net::SSLeay to be installed (it will be loaded
175	automatically when you try to create a TLS handle).	246	automatically when you try to create a TLS handle): this module doesn't
		247	have a dependency on that module, so if your module requires it, you have
		248	to add the dependency yourself.
176		249
177	For the TLS server side, use C<accept>, and for the TLS client side of a	250	Unlike TCP, TLS has a server and client side: for the TLS server side, use
178	connection, use C<connect> mode.	251	C<accept>, and for the TLS client side of a connection, use C<connect>
		252	mode.
179		253
180	You can also provide your own TLS connection object, but you have	254	You can also provide your own TLS connection object, but you have
181	to make sure that you call either C<Net::SSLeay::set_connect_state>	255	to make sure that you call either C<Net::SSLeay::set_connect_state>
182	or C<Net::SSLeay::set_accept_state> on it before you pass it to	256	or C<Net::SSLeay::set_accept_state> on it before you pass it to
183	AnyEvent::Handle.	257	AnyEvent::Handle.
184		258
185	See the C<starttls> method if you need to start TLs negotiation later.	259	See the C<< ->starttls >> method for when need to start TLS negotiation later.
186		260
187	=item tls_ctx => $ssl_ctx	261	=item tls_ctx => $ssl_ctx
188		262
189	Use the given Net::SSLeay::CTX object to create the new TLS connection	263	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection
190	(unless a connection object was specified directly). If this parameter is	264	(unless a connection object was specified directly). If this parameter is
191	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	265	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
192		266
193	=item json => JSON or JSON::XS object	267	=item json => JSON or JSON::XS object
194		268
195	This is the json coder object used by the C<json> read and write types.	269	This is the json coder object used by the C<json> read and write types.
196		270
197	If you don't supply it, then AnyEvent::Handle will create and use a	271	If you don't supply it, then AnyEvent::Handle will create and use a
198	suitable one, which will write and expect UTF-8 encoded JSON texts.	272	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		273	texts.
199		274
200	Note that you are responsible to depend on the JSON module if you want to	275	Note that you are responsible to depend on the JSON module if you want to
201	use this functionality, as AnyEvent does not have a dependency itself.	276	use this functionality, as AnyEvent does not have a dependency itself.
202		277
203	=item filter_r => $cb	278	=item filter_r => $cb
204		279
205	=item filter_w => $cb	280	=item filter_w => $cb
206		281
207	These exist, but are undocumented at this time.	282	These exist, but are undocumented at this time. (They are used internally
		283	by the TLS code).
208		284
209	=back	285	=back
210		286
211	=cut	287	=cut
212		288
…		…
222	if ($self->{tls}) {	298	if ($self->{tls}) {
223	require Net::SSLeay;	299	require Net::SSLeay;
224	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	300	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});
225	}	301	}
226		302
227	# $self->on_eof (delete $self->{on_eof} ) if $self->{on_eof}; # nop
228	# $self->on_error (delete $self->{on_error}) if $self->{on_error}; # nop
229	# $self->on_read (delete $self->{on_read} ) if $self->{on_read}; # nop
230	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
231
232	$self->{_activity} = AnyEvent->now;	303	$self->{_activity} = AnyEvent->now;
233	$self->_timeout;	304	$self->_timeout;
234		305
		306	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};
		307	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
		308
235	$self->start_read;	309	$self->start_read
		310	if $self->{on_read};
236		311
237	$self	312	$self
238	}	313	}
239		314
240	sub _shutdown {	315	sub _shutdown {
…		…
242		317
243	delete $self->{_tw};	318	delete $self->{_tw};
244	delete $self->{_rw};	319	delete $self->{_rw};
245	delete $self->{_ww};	320	delete $self->{_ww};
246	delete $self->{fh};	321	delete $self->{fh};
247	}
248		322
		323	$self->stoptls;
		324
		325	delete $self->{on_read};
		326	delete $self->{_queue};
		327	}
		328
249	sub error {	329	sub _error {
250	my ($self) = @_;	330	my ($self, $errno, $fatal) = @_;
251		331
252	{
253	local $!;
254	$self->_shutdown;	332	$self->_shutdown
255	}	333	if $fatal;
256		334
257	$self->{on_error}($self)	335	$! = $errno;
		336
258	if $self->{on_error};	337	if ($self->{on_error}) {
259		338	$self->{on_error}($self, $fatal);
		339	} else {
260	Carp::croak "AnyEvent::Handle uncaught fatal error: $!";	340	Carp::croak "AnyEvent::Handle uncaught error: $!";
		341	}
261	}	342	}
262		343
263	=item $fh = $handle->fh	344	=item $fh = $handle->fh
264		345
265	This method returns the file handle of the L<AnyEvent::Handle> object.	346	This method returns the file handle used to create the L<AnyEvent::Handle> object.
266		347
267	=cut	348	=cut
268		349
269	sub fh { $_[0]{fh} }	350	sub fh { $_[0]{fh} }
270		351
…		…
288	$_[0]{on_eof} = $_[1];	369	$_[0]{on_eof} = $_[1];
289	}	370	}
290		371
291	=item $handle->on_timeout ($cb)	372	=item $handle->on_timeout ($cb)
292		373
293	Replace the current C<on_timeout> callback, or disables the callback	374	Replace the current C<on_timeout> callback, or disables the callback (but
294	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor	375	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
295	argument.	376	argument and method.
296		377
297	=cut	378	=cut
298		379
299	sub on_timeout {	380	sub on_timeout {
300	$_[0]{on_timeout} = $_[1];	381	$_[0]{on_timeout} = $_[1];
		382	}
		383
		384	=item $handle->autocork ($boolean)
		385
		386	Enables or disables the current autocork behaviour (see C<autocork>
		387	constructor argument).
		388
		389	=cut
		390
		391	=item $handle->no_delay ($boolean)
		392
		393	Enables or disables the C<no_delay> setting (see constructor argument of
		394	the same name for details).
		395
		396	=cut
		397
		398	sub no_delay {
		399	$_[0]{no_delay} = $_[1];
		400
		401	eval {
		402	local $SIG{__DIE__};
		403	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];
		404	};
301	}	405	}
302		406
303	#############################################################################	407	#############################################################################
304		408
305	=item $handle->timeout ($seconds)	409	=item $handle->timeout ($seconds)
…		…
331	$self->{_activity} = $NOW;	435	$self->{_activity} = $NOW;
332		436
333	if ($self->{on_timeout}) {	437	if ($self->{on_timeout}) {
334	$self->{on_timeout}($self);	438	$self->{on_timeout}($self);
335	} else {	439	} else {
336	$! = Errno::ETIMEDOUT;	440	$self->_error (&Errno::ETIMEDOUT);
337	$self->error;
338	}	441	}
339		442
340	# callbakx could have changed timeout value, optimise	443	# callback could have changed timeout value, optimise
341	return unless $self->{timeout};	444	return unless $self->{timeout};
342		445
343	# calculate new after	446	# calculate new after
344	$after = $self->{timeout};	447	$after = $self->{timeout};
345	}	448	}
346		449
347	Scalar::Util::weaken $self;	450	Scalar::Util::weaken $self;
		451	return unless $self; # ->error could have destroyed $self
348		452
349	$self->{_tw} \|\|= AnyEvent->timer (after => $after, cb => sub {	453	$self->{_tw} \|\|= AnyEvent->timer (after => $after, cb => sub {
350	delete $self->{_tw};	454	delete $self->{_tw};
351	$self->_timeout;	455	$self->_timeout;
352	});	456	});
…		…
415	if $self->{low_water_mark} >= length $self->{wbuf}	519	if $self->{low_water_mark} >= length $self->{wbuf}
416	&& $self->{on_drain};	520	&& $self->{on_drain};
417		521
418	delete $self->{_ww} unless length $self->{wbuf};	522	delete $self->{_ww} unless length $self->{wbuf};
419	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	523	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
420	$self->error;	524	$self->_error ($!, 1);
421	}	525	}
422	};	526	};
423		527
424	# try to write data immediately	528	# try to write data immediately
425	$cb->();	529	$cb->() unless $self->{autocork};
426		530
427	# if still data left in wbuf, we need to poll	531	# if still data left in wbuf, we need to poll
428	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	532	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)
429	if length $self->{wbuf};	533	if length $self->{wbuf};
430	};	534	};
…		…
454	}	558	}
455	}	559	}
456		560
457	=item $handle->push_write (type => @args)	561	=item $handle->push_write (type => @args)
458		562
459	=item $handle->unshift_write (type => @args)
460
461	Instead of formatting your data yourself, you can also let this module do	563	Instead of formatting your data yourself, you can also let this module do
462	the job by specifying a type and type-specific arguments.	564	the job by specifying a type and type-specific arguments.
463		565
464	Predefined types are (if you have ideas for additional types, feel free to	566	Predefined types are (if you have ideas for additional types, feel free to
465	drop by and tell us):	567	drop by and tell us):
…		…
469	=item netstring => $string	571	=item netstring => $string
470		572
471	Formats the given value as netstring	573	Formats the given value as netstring
472	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).	574	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).
473		575
474	=back
475
476	=cut	576	=cut
477		577
478	register_write_type netstring => sub {	578	register_write_type netstring => sub {
479	my ($self, $string) = @_;	579	my ($self, $string) = @_;
480		580
481	sprintf "%d:%s,", (length $string), $string	581	sprintf "%d:%s,", (length $string), $string
		582	};
		583
		584	=item packstring => $format, $data
		585
		586	An octet string prefixed with an encoded length. The encoding C<$format>
		587	uses the same format as a Perl C<pack> format, but must specify a single
		588	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		589	optional C<!>, C<< < >> or C<< > >> modifier).
		590
		591	=cut
		592
		593	register_write_type packstring => sub {
		594	my ($self, $format, $string) = @_;
		595
		596	pack "$format/a*", $string
482	};	597	};
483		598
484	=item json => $array_or_hashref	599	=item json => $array_or_hashref
485		600
486	Encodes the given hash or array reference into a JSON object. Unless you	601	Encodes the given hash or array reference into a JSON object. Unless you
…		…
520		635
521	$self->{json} ? $self->{json}->encode ($ref)	636	$self->{json} ? $self->{json}->encode ($ref)
522	: JSON::encode_json ($ref)	637	: JSON::encode_json ($ref)
523	};	638	};
524		639
		640	=item storable => $reference
		641
		642	Freezes the given reference using L<Storable> and writes it to the
		643	handle. Uses the C<nfreeze> format.
		644
		645	=cut
		646
		647	register_write_type storable => sub {
		648	my ($self, $ref) = @_;
		649
		650	require Storable;
		651
		652	pack "w/a*", Storable::nfreeze ($ref)
		653	};
		654
		655	=back
		656
525	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	657	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
526		658
527	This function (not method) lets you add your own types to C<push_write>.	659	This function (not method) lets you add your own types to C<push_write>.
528	Whenever the given C<type> is used, C<push_write> will invoke the code	660	Whenever the given C<type> is used, C<push_write> will invoke the code
529	reference with the handle object and the remaining arguments.	661	reference with the handle object and the remaining arguments.
…		…
549	ways, the "simple" way, using only C<on_read> and the "complex" way, using	681	ways, the "simple" way, using only C<on_read> and the "complex" way, using
550	a queue.	682	a queue.
551		683
552	In the simple case, you just install an C<on_read> callback and whenever	684	In the simple case, you just install an C<on_read> callback and whenever
553	new data arrives, it will be called. You can then remove some data (if	685	new data arrives, it will be called. You can then remove some data (if
554	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	686	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
555	or not.	687	leave the data there if you want to accumulate more (e.g. when only a
		688	partial message has been received so far).
556		689
557	In the more complex case, you want to queue multiple callbacks. In this	690	In the more complex case, you want to queue multiple callbacks. In this
558	case, AnyEvent::Handle will call the first queued callback each time new	691	case, AnyEvent::Handle will call the first queued callback each time new
559	data arrives and removes it when it has done its job (see C<push_read>,	692	data arrives (also the first time it is queued) and removes it when it has
560	below).	693	done its job (see C<push_read>, below).
561		694
562	This way you can, for example, push three line-reads, followed by reading	695	This way you can, for example, push three line-reads, followed by reading
563	a chunk of data, and AnyEvent::Handle will execute them in order.	696	a chunk of data, and AnyEvent::Handle will execute them in order.
564		697
565	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	698	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
566	the specified number of bytes which give an XML datagram.	699	the specified number of bytes which give an XML datagram.
567		700
568	# in the default state, expect some header bytes	701	# in the default state, expect some header bytes
569	$handle->on_read (sub {	702	$handle->on_read (sub {
570	# some data is here, now queue the length-header-read (4 octets)	703	# some data is here, now queue the length-header-read (4 octets)
571	shift->unshift_read_chunk (4, sub {	704	shift->unshift_read (chunk => 4, sub {
572	# header arrived, decode	705	# header arrived, decode
573	my $len = unpack "N", $_[1];	706	my $len = unpack "N", $_[1];
574		707
575	# now read the payload	708	# now read the payload
576	shift->unshift_read_chunk ($len, sub {	709	shift->unshift_read (chunk => $len, sub {
577	my $xml = $_[1];	710	my $xml = $_[1];
578	# handle xml	711	# handle xml
579	});	712	});
580	});	713	});
581	});	714	});
582		715
583	Example 2: Implement a client for a protocol that replies either with	716	Example 2: Implement a client for a protocol that replies either with "OK"
584	"OK" and another line or "ERROR" for one request, and 64 bytes for the	717	and another line or "ERROR" for the first request that is sent, and 64
585	second request. Due tot he availability of a full queue, we can just	718	bytes for the second request. Due to the availability of a queue, we can
586	pipeline sending both requests and manipulate the queue as necessary in	719	just pipeline sending both requests and manipulate the queue as necessary
587	the callbacks:	720	in the callbacks.
588		721
589	# request one	722	When the first callback is called and sees an "OK" response, it will
		723	C<unshift> another line-read. This line-read will be queued I<before> the
		724	64-byte chunk callback.
		725
		726	# request one, returns either "OK + extra line" or "ERROR"
590	$handle->push_write ("request 1\015\012");	727	$handle->push_write ("request 1\015\012");
591		728
592	# we expect "ERROR" or "OK" as response, so push a line read	729	# we expect "ERROR" or "OK" as response, so push a line read
593	$handle->push_read_line (sub {	730	$handle->push_read (line => sub {
594	# if we got an "OK", we have to _prepend_ another line,	731	# if we got an "OK", we have to _prepend_ another line,
595	# so it will be read before the second request reads its 64 bytes	732	# so it will be read before the second request reads its 64 bytes
596	# which are already in the queue when this callback is called	733	# which are already in the queue when this callback is called
597	# we don't do this in case we got an error	734	# we don't do this in case we got an error
598	if ($_[1] eq "OK") {	735	if ($_[1] eq "OK") {
599	$_[0]->unshift_read_line (sub {	736	$_[0]->unshift_read (line => sub {
600	my $response = $_[1];	737	my $response = $_[1];
601	...	738	...
602	});	739	});
603	}	740	}
604	});	741	});
605		742
606	# request two	743	# request two, simply returns 64 octets
607	$handle->push_write ("request 2\015\012");	744	$handle->push_write ("request 2\015\012");
608		745
609	# simply read 64 bytes, always	746	# simply read 64 bytes, always
610	$handle->push_read_chunk (64, sub {	747	$handle->push_read (chunk => 64, sub {
611	my $response = $_[1];	748	my $response = $_[1];
612	...	749	...
613	});	750	});
614		751
615	=over 4	752	=over 4
616		753
617	=cut	754	=cut
618		755
619	sub _drain_rbuf {	756	sub _drain_rbuf {
620	my ($self) = @_;	757	my ($self) = @_;
		758
		759	local $self->{_in_drain} = 1;
621		760
622	if (	761	if (
623	defined $self->{rbuf_max}	762	defined $self->{rbuf_max}
624	&& $self->{rbuf_max} < length $self->{rbuf}	763	&& $self->{rbuf_max} < length $self->{rbuf}
625	) {	764	) {
626	$! = &Errno::ENOSPC;	765	$self->_error (&Errno::ENOSPC, 1), return;
627	$self->error;
628	}	766	}
629		767
630	return if $self->{in_drain};	768	while () {
631	local $self->{in_drain} = 1;
632
633	while (my $len = length $self->{rbuf}) {	769	my $len = length $self->{rbuf};
634	no strict 'refs';	770
635	if (my $cb = shift @{ $self->{_queue} }) {	771	if (my $cb = shift @{ $self->{_queue} }) {
636	unless ($cb->($self)) {	772	unless ($cb->($self)) {
637	if ($self->{_eof}) {	773	if ($self->{_eof}) {
638	# no progress can be made (not enough data and no data forthcoming)	774	# no progress can be made (not enough data and no data forthcoming)
639	$! = &Errno::EPIPE;	775	$self->_error (&Errno::EPIPE, 1), return;
640	$self->error;
641	}	776	}
642		777
643	unshift @{ $self->{_queue} }, $cb;	778	unshift @{ $self->{_queue} }, $cb;
644	return;	779	last;
645	}	780	}
646	} elsif ($self->{on_read}) {	781	} elsif ($self->{on_read}) {
		782	last unless $len;
		783
647	$self->{on_read}($self);	784	$self->{on_read}($self);
648		785
649	if (	786	if (
650	$self->{_eof} # if no further data will arrive
651	&& $len == length $self->{rbuf} # and no data has been consumed	787	$len == length $self->{rbuf} # if no data has been consumed
652	&& !@{ $self->{_queue} } # and the queue is still empty	788	&& !@{ $self->{_queue} } # and the queue is still empty
653	&& $self->{on_read} # and we still want to read data	789	&& $self->{on_read} # but we still have on_read
654	) {	790	) {
		791	# no further data will arrive
655	# then no progress can be made	792	# so no progress can be made
656	$! = &Errno::EPIPE;	793	$self->_error (&Errno::EPIPE, 1), return
657	$self->error;	794	if $self->{_eof};
		795
		796	last; # more data might arrive
658	}	797	}
659	} else {	798	} else {
660	# read side becomes idle	799	# read side becomes idle
661	delete $self->{_rw};	800	delete $self->{_rw};
662	return;	801	last;
663	}	802	}
664	}	803	}
665		804
		805	if ($self->{_eof}) {
		806	if ($self->{on_eof}) {
666	$self->{on_eof}($self)	807	$self->{on_eof}($self)
667	if $self->{_eof} && $self->{on_eof};	808	} else {
		809	$self->_error (0, 1);
		810	}
		811	}
		812
		813	# may need to restart read watcher
		814	unless ($self->{_rw}) {
		815	$self->start_read
		816	if $self->{on_read} \|\| @{ $self->{_queue} };
		817	}
668	}	818	}
669		819
670	=item $handle->on_read ($cb)	820	=item $handle->on_read ($cb)
671		821
672	This replaces the currently set C<on_read> callback, or clears it (when	822	This replaces the currently set C<on_read> callback, or clears it (when
…		…
677		827
678	sub on_read {	828	sub on_read {
679	my ($self, $cb) = @_;	829	my ($self, $cb) = @_;
680		830
681	$self->{on_read} = $cb;	831	$self->{on_read} = $cb;
		832	$self->_drain_rbuf if $cb && !$self->{_in_drain};
682	}	833	}
683		834
684	=item $handle->rbuf	835	=item $handle->rbuf
685		836
686	Returns the read buffer (as a modifiable lvalue).	837	Returns the read buffer (as a modifiable lvalue).
…		…
735	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	886	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
736	->($self, $cb, @_);	887	->($self, $cb, @_);
737	}	888	}
738		889
739	push @{ $self->{_queue} }, $cb;	890	push @{ $self->{_queue} }, $cb;
740	$self->_drain_rbuf;	891	$self->_drain_rbuf unless $self->{_in_drain};
741	}	892	}
742		893
743	sub unshift_read {	894	sub unshift_read {
744	my $self = shift;	895	my $self = shift;
745	my $cb = pop;	896	my $cb = pop;
…		…
751	->($self, $cb, @_);	902	->($self, $cb, @_);
752	}	903	}
753		904
754		905
755	unshift @{ $self->{_queue} }, $cb;	906	unshift @{ $self->{_queue} }, $cb;
756	$self->_drain_rbuf;	907	$self->_drain_rbuf unless $self->{_in_drain};
757	}	908	}
758		909
759	=item $handle->push_read (type => @args, $cb)	910	=item $handle->push_read (type => @args, $cb)
760		911
761	=item $handle->unshift_read (type => @args, $cb)	912	=item $handle->unshift_read (type => @args, $cb)
…		…
791	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	942	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
792	1	943	1
793	}	944	}
794	};	945	};
795		946
796	# compatibility with older API
797	sub push_read_chunk {
798	$_[0]->push_read (chunk => $_[1], $_[2]);
799	}
800
801	sub unshift_read_chunk {
802	$_[0]->unshift_read (chunk => $_[1], $_[2]);
803	}
804
805	=item line => [$eol, ]$cb->($handle, $line, $eol)	947	=item line => [$eol, ]$cb->($handle, $line, $eol)
806		948
807	The callback will be called only once a full line (including the end of	949	The callback will be called only once a full line (including the end of
808	line marker, C<$eol>) has been read. This line (excluding the end of line	950	line marker, C<$eol>) has been read. This line (excluding the end of line
809	marker) will be passed to the callback as second argument (C<$line>), and	951	marker) will be passed to the callback as second argument (C<$line>), and
…		…
824	=cut	966	=cut
825		967
826	register_read_type line => sub {	968	register_read_type line => sub {
827	my ($self, $cb, $eol) = @_;	969	my ($self, $cb, $eol) = @_;
828		970
829	$eol = qr\|(\015?\012)\| if @_ < 3;	971	if (@_ < 3) {
830	$eol = quotemeta $eol unless ref $eol;	972	# this is more than twice as fast as the generic code below
831	$eol = qr\|^(.*?)($eol)\|s;
832
833	sub {	973	sub {
834	$_[0]{rbuf} =~ s/$eol// or return;	974	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
835		975
836	$cb->($_[0], $1, $2);	976	$cb->($_[0], $1, $2);
837	1
838	}
839	};
840
841	# compatibility with older API
842	sub push_read_line {
843	my $self = shift;
844	$self->push_read (line => @_);
845	}
846
847	sub unshift_read_line {
848	my $self = shift;
849	$self->unshift_read (line => @_);
850	}
851
852	=item netstring => $cb->($handle, $string)
853
854	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
855
856	Throws an error with C<$!> set to EBADMSG on format violations.
857
858	=cut
859
860	register_read_type netstring => sub {
861	my ($self, $cb) = @_;
862
863	sub {
864	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
865	if ($_[0]{rbuf} =~ /[^0-9]/) {
866	$! = &Errno::EBADMSG;
867	$self->error;
868	}	977	1
869	return;
870	}	978	}
		979	} else {
		980	$eol = quotemeta $eol unless ref $eol;
		981	$eol = qr\|^(.*?)($eol)\|s;
871		982
872	my $len = $1;	983	sub {
		984	$_[0]{rbuf} =~ s/$eol// or return;
873		985
874	$self->unshift_read (chunk => $len, sub {	986	$cb->($_[0], $1, $2);
875	my $string = $_[1];
876	$_[0]->unshift_read (chunk => 1, sub {
877	if ($_[1] eq ",") {
878	$cb->($_[0], $string);
879	} else {
880	$! = &Errno::EBADMSG;
881	$self->error;
882	}
883	});	987	1
884	});	988	}
885
886	1
887	}	989	}
888	};	990	};
889		991
890	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	992	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
891		993
…		…
943	return 1;	1045	return 1;
944	}	1046	}
945		1047
946	# reject	1048	# reject
947	if ($reject && $$rbuf =~ $reject) {	1049	if ($reject && $$rbuf =~ $reject) {
948	$! = &Errno::EBADMSG;	1050	$self->_error (&Errno::EBADMSG);
949	$self->error;
950	}	1051	}
951		1052
952	# skip	1053	# skip
953	if ($skip && $$rbuf =~ $skip) {	1054	if ($skip && $$rbuf =~ $skip) {
954	$data .= substr $$rbuf, 0, $+[0], "";	1055	$data .= substr $$rbuf, 0, $+[0], "";
…		…
956		1057
957	()	1058	()
958	}	1059	}
959	};	1060	};
960		1061
		1062	=item netstring => $cb->($handle, $string)
		1063
		1064	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
		1065
		1066	Throws an error with C<$!> set to EBADMSG on format violations.
		1067
		1068	=cut
		1069
		1070	register_read_type netstring => sub {
		1071	my ($self, $cb) = @_;
		1072
		1073	sub {
		1074	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
		1075	if ($_[0]{rbuf} =~ /[^0-9]/) {
		1076	$self->_error (&Errno::EBADMSG);
		1077	}
		1078	return;
		1079	}
		1080
		1081	my $len = $1;
		1082
		1083	$self->unshift_read (chunk => $len, sub {
		1084	my $string = $_[1];
		1085	$_[0]->unshift_read (chunk => 1, sub {
		1086	if ($_[1] eq ",") {
		1087	$cb->($_[0], $string);
		1088	} else {
		1089	$self->_error (&Errno::EBADMSG);
		1090	}
		1091	});
		1092	});
		1093
		1094	1
		1095	}
		1096	};
		1097
		1098	=item packstring => $format, $cb->($handle, $string)
		1099
		1100	An octet string prefixed with an encoded length. The encoding C<$format>
		1101	uses the same format as a Perl C<pack> format, but must specify a single
		1102	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1103	optional C<!>, C<< < >> or C<< > >> modifier).
		1104
		1105	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.
		1106
		1107	Example: read a block of data prefixed by its length in BER-encoded
		1108	format (very efficient).
		1109
		1110	$handle->push_read (packstring => "w", sub {
		1111	my ($handle, $data) = @_;
		1112	});
		1113
		1114	=cut
		1115
		1116	register_read_type packstring => sub {
		1117	my ($self, $cb, $format) = @_;
		1118
		1119	sub {
		1120	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1121	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
		1122	or return;
		1123
		1124	$format = length pack $format, $len;
		1125
		1126	# bypass unshift if we already have the remaining chunk
		1127	if ($format + $len <= length $_[0]{rbuf}) {
		1128	my $data = substr $_[0]{rbuf}, $format, $len;
		1129	substr $_[0]{rbuf}, 0, $format + $len, "";
		1130	$cb->($_[0], $data);
		1131	} else {
		1132	# remove prefix
		1133	substr $_[0]{rbuf}, 0, $format, "";
		1134
		1135	# read remaining chunk
		1136	$_[0]->unshift_read (chunk => $len, $cb);
		1137	}
		1138
		1139	1
		1140	}
		1141	};
		1142
961	=item json => $cb->($handle, $hash_or_arrayref)	1143	=item json => $cb->($handle, $hash_or_arrayref)
962		1144
963	Reads a JSON object or array, decodes it and passes it to the callback.	1145	Reads a JSON object or array, decodes it and passes it to the callback.
964		1146
965	If a C<json> object was passed to the constructor, then that will be used	1147	If a C<json> object was passed to the constructor, then that will be used
…		…
975	the C<json> write type description, above, for an actual example.	1157	the C<json> write type description, above, for an actual example.
976		1158
977	=cut	1159	=cut
978		1160
979	register_read_type json => sub {	1161	register_read_type json => sub {
980	my ($self, $cb, $accept, $reject, $skip) = @_;	1162	my ($self, $cb) = @_;
981		1163
982	require JSON;	1164	require JSON;
983		1165
984	my $data;	1166	my $data;
985	my $rbuf = \$self->{rbuf};	1167	my $rbuf = \$self->{rbuf};
…		…
1000	()	1182	()
1001	}	1183	}
1002	}	1184	}
1003	};	1185	};
1004		1186
		1187	=item storable => $cb->($handle, $ref)
		1188
		1189	Deserialises a L<Storable> frozen representation as written by the
		1190	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1191	data).
		1192
		1193	Raises C<EBADMSG> error if the data could not be decoded.
		1194
		1195	=cut
		1196
		1197	register_read_type storable => sub {
		1198	my ($self, $cb) = @_;
		1199
		1200	require Storable;
		1201
		1202	sub {
		1203	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1204	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
		1205	or return;
		1206
		1207	my $format = length pack "w", $len;
		1208
		1209	# bypass unshift if we already have the remaining chunk
		1210	if ($format + $len <= length $_[0]{rbuf}) {
		1211	my $data = substr $_[0]{rbuf}, $format, $len;
		1212	substr $_[0]{rbuf}, 0, $format + $len, "";
		1213	$cb->($_[0], Storable::thaw ($data));
		1214	} else {
		1215	# remove prefix
		1216	substr $_[0]{rbuf}, 0, $format, "";
		1217
		1218	# read remaining chunk
		1219	$_[0]->unshift_read (chunk => $len, sub {
		1220	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1221	$cb->($_[0], $ref);
		1222	} else {
		1223	$self->_error (&Errno::EBADMSG);
		1224	}
		1225	});
		1226	}
		1227
		1228	1
		1229	}
		1230	};
		1231
1005	=back	1232	=back
1006		1233
1007	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1234	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)
1008		1235
1009	This function (not method) lets you add your own types to C<push_read>.	1236	This function (not method) lets you add your own types to C<push_read>.
…		…
1027	=item $handle->stop_read	1254	=item $handle->stop_read
1028		1255
1029	=item $handle->start_read	1256	=item $handle->start_read
1030		1257
1031	In rare cases you actually do not want to read anything from the	1258	In rare cases you actually do not want to read anything from the
1032	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1259	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
1033	any queued callbacks will be executed then. To start reading again, call	1260	any queued callbacks will be executed then. To start reading again, call
1034	C<start_read>.	1261	C<start_read>.
		1262
		1263	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1264	you change the C<on_read> callback or push/unshift a read callback, and it
		1265	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1266	there are any read requests in the queue.
1035		1267
1036	=cut	1268	=cut
1037		1269
1038	sub stop_read {	1270	sub stop_read {
1039	my ($self) = @_;	1271	my ($self) = @_;
…		…
1054	if ($len > 0) {	1286	if ($len > 0) {
1055	$self->{_activity} = AnyEvent->now;	1287	$self->{_activity} = AnyEvent->now;
1056		1288
1057	$self->{filter_r}	1289	$self->{filter_r}
1058	? $self->{filter_r}($self, $rbuf)	1290	? $self->{filter_r}($self, $rbuf)
1059	: $self->_drain_rbuf;	1291	: $self->{_in_drain} \|\| $self->_drain_rbuf;
1060		1292
1061	} elsif (defined $len) {	1293	} elsif (defined $len) {
1062	delete $self->{_rw};	1294	delete $self->{_rw};
1063	$self->{_eof} = 1;	1295	$self->{_eof} = 1;
1064	$self->_drain_rbuf;	1296	$self->_drain_rbuf unless $self->{_in_drain};
1065		1297
1066	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1298	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1067	return $self->error;	1299	return $self->_error ($!, 1);
1068	}	1300	}
1069	});	1301	});
1070	}	1302	}
1071	}	1303	}
1072		1304
1073	sub _dotls {	1305	sub _dotls {
1074	my ($self) = @_;	1306	my ($self) = @_;
		1307
		1308	my $buf;
1075		1309
1076	if (length $self->{_tls_wbuf}) {	1310	if (length $self->{_tls_wbuf}) {
1077	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1311	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1078	substr $self->{_tls_wbuf}, 0, $len, "";	1312	substr $self->{_tls_wbuf}, 0, $len, "";
1079	}	1313	}
1080	}	1314	}
1081		1315
1082	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1316	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1083	$self->{wbuf} .= $buf;	1317	$self->{wbuf} .= $buf;
1084	$self->_drain_wbuf;	1318	$self->_drain_wbuf;
1085	}	1319	}
1086		1320
1087	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {	1321	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {
		1322	if (length $buf) {
1088	$self->{rbuf} .= $buf;	1323	$self->{rbuf} .= $buf;
1089	$self->_drain_rbuf;	1324	$self->_drain_rbuf unless $self->{_in_drain};
		1325	} else {
		1326	# let's treat SSL-eof as we treat normal EOF
		1327	$self->{_eof} = 1;
		1328	$self->_shutdown;
		1329	return;
		1330	}
1090	}	1331	}
1091		1332
1092	my $err = Net::SSLeay::get_error ($self->{tls}, -1);	1333	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1093		1334
1094	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {	1335	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1095	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {	1336	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1096	$self->error;	1337	return $self->_error ($!, 1);
1097	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {	1338	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1098	$! = &Errno::EIO;	1339	return $self->_error (&Errno::EIO, 1);
1099	$self->error;
1100	}	1340	}
1101		1341
1102	# all others are fine for our purposes	1342	# all others are fine for our purposes
1103	}	1343	}
1104	}	1344	}
…		…
1119	call and can be used or changed to your liking. Note that the handshake	1359	call and can be used or changed to your liking. Note that the handshake
1120	might have already started when this function returns.	1360	might have already started when this function returns.
1121		1361
1122	=cut	1362	=cut
1123		1363
1124	# TODO: maybe document...
1125	sub starttls {	1364	sub starttls {
1126	my ($self, $ssl, $ctx) = @_;	1365	my ($self, $ssl, $ctx) = @_;
1127		1366
1128	$self->stoptls;	1367	$self->stoptls;
1129		1368
…		…
1140	# basically, this is deep magic (because SSL_read should have the same issues)	1379	# basically, this is deep magic (because SSL_read should have the same issues)
1141	# but the openssl maintainers basically said: "trust us, it just works".	1380	# but the openssl maintainers basically said: "trust us, it just works".
1142	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1381	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1143	# and mismaintained ssleay-module doesn't even offer them).	1382	# and mismaintained ssleay-module doesn't even offer them).
1144	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1383	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1384	#
		1385	# in short: this is a mess.
		1386	#
		1387	# note that we do not try to kepe the length constant between writes as we are required to do.
		1388	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1389	# and we drive openssl fully in blocking mode here.
1145	Net::SSLeay::CTX_set_mode ($self->{tls},	1390	Net::SSLeay::CTX_set_mode ($self->{tls},
1146	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)	1391	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)
1147	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));	1392	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));
1148		1393
1149	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1394	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
…		…
1182		1427
1183	sub DESTROY {	1428	sub DESTROY {
1184	my $self = shift;	1429	my $self = shift;
1185		1430
1186	$self->stoptls;	1431	$self->stoptls;
		1432
		1433	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1434
		1435	if ($linger && length $self->{wbuf}) {
		1436	my $fh = delete $self->{fh};
		1437	my $wbuf = delete $self->{wbuf};
		1438
		1439	my @linger;
		1440
		1441	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {
		1442	my $len = syswrite $fh, $wbuf, length $wbuf;
		1443
		1444	if ($len > 0) {
		1445	substr $wbuf, 0, $len, "";
		1446	} else {
		1447	@linger = (); # end
		1448	}
		1449	});
		1450	push @linger, AnyEvent->timer (after => $linger, cb => sub {
		1451	@linger = ();
		1452	});
		1453	}
1187	}	1454	}
1188		1455
1189	=item AnyEvent::Handle::TLS_CTX	1456	=item AnyEvent::Handle::TLS_CTX
1190		1457
1191	This function creates and returns the Net::SSLeay::CTX object used by	1458	This function creates and returns the Net::SSLeay::CTX object used by
…		…
1233	=over 4	1500	=over 4
1234		1501
1235	=item * all constructor arguments become object members.	1502	=item * all constructor arguments become object members.
1236		1503
1237	At least initially, when you pass a C<tls>-argument to the constructor it	1504	At least initially, when you pass a C<tls>-argument to the constructor it
1238	will end up in C<< $handle->{tls} >>. Those members might be changes or	1505	will end up in C<< $handle->{tls} >>. Those members might be changed or
1239	mutated later on (for example C<tls> will hold the TLS connection object).	1506	mutated later on (for example C<tls> will hold the TLS connection object).
1240		1507
1241	=item * other object member names are prefixed with an C<_>.	1508	=item * other object member names are prefixed with an C<_>.
1242		1509
1243	All object members not explicitly documented (internal use) are prefixed	1510	All object members not explicitly documented (internal use) are prefixed

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.48 by root, Thu May 29 00:27:06 2008 UTC vs. Revision 1.88 by root, Thu Aug 21 23:48:35 2008 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.48 by root, Thu May 29 00:27:06 2008 UTC vs.
Revision 1.88 by root, Thu Aug 21 23:48:35 2008 UTC