ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.96 by root, Thu Oct 2 08:10:27 2008 UTC vs.
Revision 1.207 by root, Mon Nov 15 22:29:36 2010 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.3;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes, and other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, where the documentation refers to "bytes", it means
58	means characters. As sysread and syswrite are used for all I/O, their	42	characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
60		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
64	=head2 SIGPIPE is not handled by this module	51	=cut
65		52
66	SIGPIPE is not handled by this module, so one of the practical	53	package AnyEvent::Handle;
67	requirements of using it is to ignore SIGPIPE (C<$SIG{PIPE} =	54
68	'IGNORE'>). At least, this is highly recommend in a networked program: If	55	use Scalar::Util ();
69	you use AnyEvent::Handle in a filter program (like sort), exiting on	56	use List::Util ();
70	SIGPIPE is probably the right thing to do.	57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
		80	sub MAX_READ_SIZE() { 131072 }
71		81
72	=head1 METHODS	82	=head1 METHODS
73		83
74	=over 4	84	=over 4
75		85
76	=item B<new (%args)>	86	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
77		87
78	The constructor supports these arguments (all as key => value pairs).	88	The constructor supports these arguments (all as C<< key => value >> pairs).
79		89
80	=over 4	90	=over 4
81		91
82	=item fh => $filehandle [MANDATORY]	92	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
83		93
84	The filehandle this L<AnyEvent::Handle> object will operate on.	94	The filehandle this L<AnyEvent::Handle> object will operate on.
85
86	NOTE: The filehandle will be set to non-blocking mode (using	95	NOTE: The filehandle will be set to non-blocking mode (using
87	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	96	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
88	that mode.	97	that mode.
89		98
		99	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		100
		101	Try to connect to the specified host and service (port), using
		102	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		103	default C<peername>.
		104
		105	You have to specify either this parameter, or C<fh>, above.
		106
		107	It is possible to push requests on the read and write queues, and modify
		108	properties of the stream, even while AnyEvent::Handle is connecting.
		109
		110	When this parameter is specified, then the C<on_prepare>,
		111	C<on_connect_error> and C<on_connect> callbacks will be called under the
		112	appropriate circumstances:
		113
		114	=over 4
		115
90	=item on_eof => $cb->($handle)	116	=item on_prepare => $cb->($handle)
91		117
92	Set the callback to be called when an end-of-file condition is detected,	118	This (rarely used) callback is called before a new connection is
93	i.e. in the case of a socket, when the other side has closed the	119	attempted, but after the file handle has been created. It could be used to
94	connection cleanly.	120	prepare the file handle with parameters required for the actual connect
		121	(as opposed to settings that can be changed when the connection is already
		122	established).
95		123
96	For sockets, this just means that the other side has stopped sending data,	124	The return value of this callback should be the connect timeout value in
97	you can still try to write data, and, in fact, one can return from the eof	125	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
98	callback and continue writing data, as only the read part has been shut	126	default timeout is to be used).
99	down.
100		127
101	While not mandatory, it is I<highly> recommended to set an eof callback,	128	=item on_connect => $cb->($handle, $host, $port, $retry->())
102	otherwise you might end up with a closed socket while you are still
103	waiting for data.
104		129
105	If an EOF condition has been detected but no C<on_eof> callback has been	130	This callback is called when a connection has been successfully established.
106	set, then a fatal error will be raised with C<$!> set to <0>.
107		131
		132	The peer's numeric host and port (the socket peername) are passed as
		133	parameters, together with a retry callback.
		134
		135	If, for some reason, the handle is not acceptable, calling C<$retry>
		136	will continue with the next connection target (in case of multi-homed
		137	hosts or SRV records there can be multiple connection endpoints). At the
		138	time it is called the read and write queues, eof status, tls status and
		139	similar properties of the handle will have been reset.
		140
		141	In most cases, you should ignore the C<$retry> parameter.
		142
		143	=item on_connect_error => $cb->($handle, $message)
		144
		145	This callback is called when the connection could not be
		146	established. C<$!> will contain the relevant error code, and C<$message> a
		147	message describing it (usually the same as C<"$!">).
		148
		149	If this callback isn't specified, then C<on_error> will be called with a
		150	fatal error instead.
		151
		152	=back
		153
108	=item on_error => $cb->($handle, $fatal)	154	=item on_error => $cb->($handle, $fatal, $message)
109		155
110	This is the error callback, which is called when, well, some error	156	This is the error callback, which is called when, well, some error
111	occured, such as not being able to resolve the hostname, failure to	157	occured, such as not being able to resolve the hostname, failure to
112	connect or a read error.	158	connect, or a read error.
113		159
114	Some errors are fatal (which is indicated by C<$fatal> being true). On	160	Some errors are fatal (which is indicated by C<$fatal> being true). On
115	fatal errors the handle object will be shut down and will not be usable	161	fatal errors the handle object will be destroyed (by a call to C<< ->
116	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal	162	destroy >>) after invoking the error callback (which means you are free to
117	errors are an EOF condition with active (but unsatisifable) read watchers	163	examine the handle object). Examples of fatal errors are an EOF condition
118	(C<EPIPE>) or I/O errors.	164	with active (but unsatisfiable) read watchers (C<EPIPE>) or I/O errors. In
		165	cases where the other side can close the connection at will, it is
		166	often easiest to not report C<EPIPE> errors in this callback.
119		167
		168	AnyEvent::Handle tries to find an appropriate error code for you to check
		169	against, but in some cases (TLS errors), this does not work well. It is
		170	recommended to always output the C<$message> argument in human-readable
		171	error messages (it's usually the same as C<"$!">).
		172
120	Non-fatal errors can be retried by simply returning, but it is recommended	173	Non-fatal errors can be retried by returning, but it is recommended
121	to simply ignore this parameter and instead abondon the handle object	174	to simply ignore this parameter and instead abondon the handle object
122	when this callback is invoked. Examples of non-fatal errors are timeouts	175	when this callback is invoked. Examples of non-fatal errors are timeouts
123	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).	176	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
124		177
125	On callback entrance, the value of C<$!> contains the operating system	178	On entry to the callback, the value of C<$!> contains the operating
126	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	179	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		180	C<EPROTO>).
127		181
128	While not mandatory, it is I<highly> recommended to set this callback, as	182	While not mandatory, it is I<highly> recommended to set this callback, as
129	you will not be notified of errors otherwise. The default simply calls	183	you will not be notified of errors otherwise. The default just calls
130	C<croak>.	184	C<croak>.
131		185
132	=item on_read => $cb->($handle)	186	=item on_read => $cb->($handle)
133		187
134	This sets the default read callback, which is called when data arrives	188	This sets the default read callback, which is called when data arrives
135	and no read request is in the queue (unlike read queue callbacks, this	189	and no read request is in the queue (unlike read queue callbacks, this
136	callback will only be called when at least one octet of data is in the	190	callback will only be called when at least one octet of data is in the
137	read buffer).	191	read buffer).
138		192
139	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	193	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
140	method or access the C<$handle->{rbuf}> member directly.	194	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		195	must not enlarge or modify the read buffer, you can only remove data at
		196	the beginning from it.
141		197
		198	You can also call C<< ->push_read (...) >> or any other function that
		199	modifies the read queue. Or do both. Or ...
		200
142	When an EOF condition is detected then AnyEvent::Handle will first try to	201	When an EOF condition is detected, AnyEvent::Handle will first try to
143	feed all the remaining data to the queued callbacks and C<on_read> before	202	feed all the remaining data to the queued callbacks and C<on_read> before
144	calling the C<on_eof> callback. If no progress can be made, then a fatal	203	calling the C<on_eof> callback. If no progress can be made, then a fatal
145	error will be raised (with C<$!> set to C<EPIPE>).	204	error will be raised (with C<$!> set to C<EPIPE>).
146		205
		206	Note that, unlike requests in the read queue, an C<on_read> callback
		207	doesn't mean you I<require> some data: if there is an EOF and there
		208	are outstanding read requests then an error will be flagged. With an
		209	C<on_read> callback, the C<on_eof> callback will be invoked.
		210
		211	=item on_eof => $cb->($handle)
		212
		213	Set the callback to be called when an end-of-file condition is detected,
		214	i.e. in the case of a socket, when the other side has closed the
		215	connection cleanly, and there are no outstanding read requests in the
		216	queue (if there are read requests, then an EOF counts as an unexpected
		217	connection close and will be flagged as an error).
		218
		219	For sockets, this just means that the other side has stopped sending data,
		220	you can still try to write data, and, in fact, one can return from the EOF
		221	callback and continue writing data, as only the read part has been shut
		222	down.
		223
		224	If an EOF condition has been detected but no C<on_eof> callback has been
		225	set, then a fatal error will be raised with C<$!> set to <0>.
		226
147	=item on_drain => $cb->($handle)	227	=item on_drain => $cb->($handle)
148		228
149	This sets the callback that is called when the write buffer becomes empty	229	This sets the callback that is called when the write buffer becomes empty
150	(or when the callback is set and the buffer is empty already).	230	(or immediately if the buffer is empty already).
151		231
152	To append to the write buffer, use the C<< ->push_write >> method.	232	To append to the write buffer, use the C<< ->push_write >> method.
153		233
154	This callback is useful when you don't want to put all of your write data	234	This callback is useful when you don't want to put all of your write data
155	into the queue at once, for example, when you want to write the contents	235	into the queue at once, for example, when you want to write the contents
…		…
157	memory and push it into the queue, but instead only read more data from	237	memory and push it into the queue, but instead only read more data from
158	the file when the write queue becomes empty.	238	the file when the write queue becomes empty.
159		239
160	=item timeout => $fractional_seconds	240	=item timeout => $fractional_seconds
161		241
		242	=item rtimeout => $fractional_seconds
		243
		244	=item wtimeout => $fractional_seconds
		245
162	If non-zero, then this enables an "inactivity" timeout: whenever this many	246	If non-zero, then these enables an "inactivity" timeout: whenever this
163	seconds pass without a successful read or write on the underlying file	247	many seconds pass without a successful read or write on the underlying
164	handle, the C<on_timeout> callback will be invoked (and if that one is	248	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
165	missing, a non-fatal C<ETIMEDOUT> error will be raised).	249	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		250	error will be raised).
166		251
		252	There are three variants of the timeouts that work independently
		253	of each other, for both read and write, just read, and just write:
		254	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		255	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		256	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		257
167	Note that timeout processing is also active when you currently do not have	258	Note that timeout processing is active even when you do not have
168	any outstanding read or write requests: If you plan to keep the connection	259	any outstanding read or write requests: If you plan to keep the connection
169	idle then you should disable the timout temporarily or ignore the timeout	260	idle then you should disable the timeout temporarily or ignore the timeout
170	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	261	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
171	restart the timeout.	262	restart the timeout.
172		263
173	Zero (the default) disables this timeout.	264	Zero (the default) disables this timeout.
174		265
…		…
190	amount of data without a callback ever being called as long as the line	281	amount of data without a callback ever being called as long as the line
191	isn't finished).	282	isn't finished).
192		283
193	=item autocork => <boolean>	284	=item autocork => <boolean>
194		285
195	When disabled (the default), then C<push_write> will try to immediately	286	When disabled (the default), C<push_write> will try to immediately
196	write the data to the handle, if possible. This avoids having to register	287	write the data to the handle if possible. This avoids having to register
197	a write watcher and wait for the next event loop iteration, but can	288	a write watcher and wait for the next event loop iteration, but can
198	be inefficient if you write multiple small chunks (on the wire, this	289	be inefficient if you write multiple small chunks (on the wire, this
199	disadvantage is usually avoided by your kernel's nagle algorithm, see	290	disadvantage is usually avoided by your kernel's nagle algorithm, see
200	C<no_delay>, but this option can save costly syscalls).	291	C<no_delay>, but this option can save costly syscalls).
201		292
202	When enabled, then writes will always be queued till the next event loop	293	When enabled, writes will always be queued till the next event loop
203	iteration. This is efficient when you do many small writes per iteration,	294	iteration. This is efficient when you do many small writes per iteration,
204	but less efficient when you do a single write only per iteration (or when	295	but less efficient when you do a single write only per iteration (or when
205	the write buffer often is full). It also increases write latency.	296	the write buffer often is full). It also increases write latency.
206		297
207	=item no_delay => <boolean>	298	=item no_delay => <boolean>
…		…
211	the Nagle algorithm, and usually it is beneficial.	302	the Nagle algorithm, and usually it is beneficial.
212		303
213	In some situations you want as low a delay as possible, which can be	304	In some situations you want as low a delay as possible, which can be
214	accomplishd by setting this option to a true value.	305	accomplishd by setting this option to a true value.
215		306
216	The default is your opertaing system's default behaviour (most likely	307	The default is your operating system's default behaviour (most likely
217	enabled), this option explicitly enables or disables it, if possible.	308	enabled). This option explicitly enables or disables it, if possible.
		309
		310	=item keepalive => <boolean>
		311
		312	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		313	normally, TCP connections have no time-out once established, so TCP
		314	connections, once established, can stay alive forever even when the other
		315	side has long gone. TCP keepalives are a cheap way to take down long-lived
		316	TCP connections when the other side becomes unreachable. While the default
		317	is OS-dependent, TCP keepalives usually kick in after around two hours,
		318	and, if the other side doesn't reply, take down the TCP connection some 10
		319	to 15 minutes later.
		320
		321	It is harmless to specify this option for file handles that do not support
		322	keepalives, and enabling it on connections that are potentially long-lived
		323	is usually a good idea.
		324
		325	=item oobinline => <boolean>
		326
		327	BSD majorly fucked up the implementation of TCP urgent data. The result
		328	is that almost no OS implements TCP according to the specs, and every OS
		329	implements it slightly differently.
		330
		331	If you want to handle TCP urgent data, then setting this flag (the default
		332	is enabled) gives you the most portable way of getting urgent data, by
		333	putting it into the stream.
		334
		335	Since BSD emulation of OOB data on top of TCP's urgent data can have
		336	security implications, AnyEvent::Handle sets this flag automatically
		337	unless explicitly specified. Note that setting this flag after
		338	establishing a connection I<may> be a bit too late (data loss could
		339	already have occured on BSD systems), but at least it will protect you
		340	from most attacks.
218		341
219	=item read_size => <bytes>	342	=item read_size => <bytes>
220		343
221	The default read block size (the amount of bytes this module will	344	The initial read block size, the number of bytes this module will try to
222	try to read during each loop iteration, which affects memory	345	read during each loop iteration. Each handle object will consume at least
223	requirements). Default: C<8192>.	346	this amount of memory for the read buffer as well, so when handling many
		347	connections requirements). See also C<max_read_size>. Default: C<2048>.
		348
		349	=item max_read_size => <bytes>
		350
		351	The maximum read buffer size used by the dynamic adjustment
		352	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		353	one go it will double C<read_size> up to the maximum given by this
		354	option. Default: C<131072> or C<read_size>, whichever is higher.
224		355
225	=item low_water_mark => <bytes>	356	=item low_water_mark => <bytes>
226		357
227	Sets the amount of bytes (default: C<0>) that make up an "empty" write	358	Sets the number of bytes (default: C<0>) that make up an "empty" write
228	buffer: If the write reaches this size or gets even samller it is	359	buffer: If the buffer reaches this size or gets even samller it is
229	considered empty.	360	considered empty.
230		361
231	Sometimes it can be beneficial (for performance reasons) to add data to	362	Sometimes it can be beneficial (for performance reasons) to add data to
232	the write buffer before it is fully drained, but this is a rare case, as	363	the write buffer before it is fully drained, but this is a rare case, as
233	the operating system kernel usually buffers data as well, so the default	364	the operating system kernel usually buffers data as well, so the default
234	is good in almost all cases.	365	is good in almost all cases.
235		366
236	=item linger => <seconds>	367	=item linger => <seconds>
237		368
238	If non-zero (default: C<3600>), then the destructor of the	369	If this is non-zero (default: C<3600>), the destructor of the
239	AnyEvent::Handle object will check whether there is still outstanding	370	AnyEvent::Handle object will check whether there is still outstanding
240	write data and will install a watcher that will write this data to the	371	write data and will install a watcher that will write this data to the
241	socket. No errors will be reported (this mostly matches how the operating	372	socket. No errors will be reported (this mostly matches how the operating
242	system treats outstanding data at socket close time).	373	system treats outstanding data at socket close time).
243		374
244	This will not work for partial TLS data that could not be encoded	375	This will not work for partial TLS data that could not be encoded
245	yet. This data will be lost. Calling the C<stoptls> method in time might	376	yet. This data will be lost. Calling the C<stoptls> method in time might
246	help.	377	help.
247		378
		379	=item peername => $string
		380
		381	A string used to identify the remote site - usually the DNS hostname
		382	(I<not> IDN!) used to create the connection, rarely the IP address.
		383
		384	Apart from being useful in error messages, this string is also used in TLS
		385	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		386	verification will be skipped when C<peername> is not specified or is
		387	C<undef>.
		388
248	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	389	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
249		390
250	When this parameter is given, it enables TLS (SSL) mode, that means	391	When this parameter is given, it enables TLS (SSL) mode, that means
251	AnyEvent will start a TLS handshake as soon as the conenction has been	392	AnyEvent will start a TLS handshake as soon as the connection has been
252	established and will transparently encrypt/decrypt data afterwards.	393	established and will transparently encrypt/decrypt data afterwards.
		394
		395	All TLS protocol errors will be signalled as C<EPROTO>, with an
		396	appropriate error message.
253		397
254	TLS mode requires Net::SSLeay to be installed (it will be loaded	398	TLS mode requires Net::SSLeay to be installed (it will be loaded
255	automatically when you try to create a TLS handle): this module doesn't	399	automatically when you try to create a TLS handle): this module doesn't
256	have a dependency on that module, so if your module requires it, you have	400	have a dependency on that module, so if your module requires it, you have
257	to add the dependency yourself.	401	to add the dependency yourself.
…		…
261	mode.	405	mode.
262		406
263	You can also provide your own TLS connection object, but you have	407	You can also provide your own TLS connection object, but you have
264	to make sure that you call either C<Net::SSLeay::set_connect_state>	408	to make sure that you call either C<Net::SSLeay::set_connect_state>
265	or C<Net::SSLeay::set_accept_state> on it before you pass it to	409	or C<Net::SSLeay::set_accept_state> on it before you pass it to
266	AnyEvent::Handle.	410	AnyEvent::Handle. Also, this module will take ownership of this connection
		411	object.
267		412
		413	At some future point, AnyEvent::Handle might switch to another TLS
		414	implementation, then the option to use your own session object will go
		415	away.
		416
		417	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		418	passing in the wrong integer will lead to certain crash. This most often
		419	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		420	segmentation fault.
		421
268	See the C<< ->starttls >> method for when need to start TLS negotiation later.	422	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
269		423
270	=item tls_ctx => $ssl_ctx	424	=item tls_ctx => $anyevent_tls
271		425
272	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection	426	Use the given C<AnyEvent::TLS> object to create the new TLS connection
273	(unless a connection object was specified directly). If this parameter is	427	(unless a connection object was specified directly). If this
274	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	428	parameter is missing (or C<undef>), then AnyEvent::Handle will use
		429	C<AnyEvent::Handle::TLS_CTX>.
		430
		431	Instead of an object, you can also specify a hash reference with C<< key
		432	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		433	new TLS context object.
		434
		435	=item on_starttls => $cb->($handle, $success[, $error_message])
		436
		437	This callback will be invoked when the TLS/SSL handshake has finished. If
		438	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		439	(C<on_stoptls> will not be called in this case).
		440
		441	The session in C<< $handle->{tls} >> can still be examined in this
		442	callback, even when the handshake was not successful.
		443
		444	TLS handshake failures will not cause C<on_error> to be invoked when this
		445	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		446
		447	Without this callback, handshake failures lead to C<on_error> being
		448	called as usual.
		449
		450	Note that you cannot just call C<starttls> again in this callback. If you
		451	need to do that, start an zero-second timer instead whose callback can
		452	then call C<< ->starttls >> again.
		453
		454	=item on_stoptls => $cb->($handle)
		455
		456	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		457	set, then it will be invoked after freeing the TLS session. If it is not,
		458	then a TLS shutdown condition will be treated like a normal EOF condition
		459	on the handle.
		460
		461	The session in C<< $handle->{tls} >> can still be examined in this
		462	callback.
		463
		464	This callback will only be called on TLS shutdowns, not when the
		465	underlying handle signals EOF.
275		466
276	=item json => JSON or JSON::XS object	467	=item json => JSON or JSON::XS object
277		468
278	This is the json coder object used by the C<json> read and write types.	469	This is the json coder object used by the C<json> read and write types.
279		470
…		…
288		479
289	=cut	480	=cut
290		481
291	sub new {	482	sub new {
292	my $class = shift;	483	my $class = shift;
293
294	my $self = bless { @_ }, $class;	484	my $self = bless { @_ }, $class;
295		485
296	$self->{fh} or Carp::croak "mandatory argument fh is missing";	486	if ($self->{fh}) {
		487	$self->_start;
		488	return unless $self->{fh}; # could be gone by now
		489
		490	} elsif ($self->{connect}) {
		491	require AnyEvent::Socket;
		492
		493	$self->{peername} = $self->{connect}[0]
		494	unless exists $self->{peername};
		495
		496	$self->{_skip_drain_rbuf} = 1;
		497
		498	{
		499	Scalar::Util::weaken (my $self = $self);
		500
		501	$self->{_connect} =
		502	AnyEvent::Socket::tcp_connect (
		503	$self->{connect}[0],
		504	$self->{connect}[1],
		505	sub {
		506	my ($fh, $host, $port, $retry) = @_;
		507
		508	delete $self->{_connect}; # no longer needed
		509
		510	if ($fh) {
		511	$self->{fh} = $fh;
		512
		513	delete $self->{_skip_drain_rbuf};
		514	$self->_start;
		515
		516	$self->{on_connect}
		517	and $self->{on_connect}($self, $host, $port, sub {
		518	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		519	$self->{_skip_drain_rbuf} = 1;
		520	&$retry;
		521	});
		522
		523	} else {
		524	if ($self->{on_connect_error}) {
		525	$self->{on_connect_error}($self, "$!");
		526	$self->destroy;
		527	} else {
		528	$self->_error ($!, 1);
		529	}
		530	}
		531	},
		532	sub {
		533	local $self->{fh} = $_[0];
		534
		535	$self->{on_prepare}
		536	? $self->{on_prepare}->($self)
		537	: ()
		538	}
		539	);
		540	}
		541
		542	} else {
		543	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		544	}
		545
		546	$self
		547	}
		548
		549	sub _start {
		550	my ($self) = @_;
		551
		552	# too many clueless people try to use udp and similar sockets
		553	# with AnyEvent::Handle, do them a favour.
		554	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		555	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		556	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
297		557
298	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	558	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
299		559
		560	$self->{_activity} =
		561	$self->{_ractivity} =
		562	$self->{_wactivity} = AE::now;
		563
		564	$self->{read_size} ||= 2048;
		565	$self->{max_read_size} = $self->{read_size}
		566	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		567
		568	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		569	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		570	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		571
		572	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		573	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		574
		575	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		576
300	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})	577	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
301	if $self->{tls};	578	if $self->{tls};
302		579
303	$self->{_activity} = AnyEvent->now;
304	$self->_timeout;
305
306	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	580	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
307	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
308		581
309	$self->start_read	582	$self->start_read
310	if $self->{on_read};	583	if $self->{on_read} || @{ $self->{_queue} };
311		584
312	$self	585	$self->_drain_wbuf;
313	}
314
315	sub _shutdown {
316	my ($self) = @_;
317
318	delete $self->{_tw};
319	delete $self->{_rw};
320	delete $self->{_ww};
321	delete $self->{fh};
322
323	&_freetls;
324
325	delete $self->{on_read};
326	delete $self->{_queue};
327	}	586	}
328		587
329	sub _error {	588	sub _error {
330	my ($self, $errno, $fatal) = @_;	589	my ($self, $errno, $fatal, $message) = @_;
331
332	$self->_shutdown
333	if $fatal;
334		590
335	$! = $errno;	591	$! = $errno;
		592	$message ||= "$!";
336		593
337	if ($self->{on_error}) {	594	if ($self->{on_error}) {
338	$self->{on_error}($self, $fatal);	595	$self->{on_error}($self, $fatal, $message);
339	} else {	596	$self->destroy if $fatal;
		597	} elsif ($self->{fh} || $self->{connect}) {
		598	$self->destroy;
340	Carp::croak "AnyEvent::Handle uncaught error: $!";	599	Carp::croak "AnyEvent::Handle uncaught error: $message";
341	}	600	}
342	}	601	}
343		602
344	=item $fh = $handle->fh	603	=item $fh = $handle->fh
345		604
…		…
369	$_[0]{on_eof} = $_[1];	628	$_[0]{on_eof} = $_[1];
370	}	629	}
371		630
372	=item $handle->on_timeout ($cb)	631	=item $handle->on_timeout ($cb)
373		632
374	Replace the current C<on_timeout> callback, or disables the callback (but	633	=item $handle->on_rtimeout ($cb)
375	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
376	argument and method.
377		634
378	=cut	635	=item $handle->on_wtimeout ($cb)
379		636
380	sub on_timeout {	637	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
381	$_[0]{on_timeout} = $_[1];	638	callback, or disables the callback (but not the timeout) if C<$cb> =
382	}	639	C<undef>. See the C<timeout> constructor argument and method.
		640
		641	=cut
		642
		643	# see below
383		644
384	=item $handle->autocork ($boolean)	645	=item $handle->autocork ($boolean)
385		646
386	Enables or disables the current autocork behaviour (see C<autocork>	647	Enables or disables the current autocork behaviour (see C<autocork>
387	constructor argument).	648	constructor argument). Changes will only take effect on the next write.
388		649
389	=cut	650	=cut
		651
		652	sub autocork {
		653	$_[0]{autocork} = $_[1];
		654	}
390		655
391	=item $handle->no_delay ($boolean)	656	=item $handle->no_delay ($boolean)
392		657
393	Enables or disables the C<no_delay> setting (see constructor argument of	658	Enables or disables the C<no_delay> setting (see constructor argument of
394	the same name for details).	659	the same name for details).
…		…
396	=cut	661	=cut
397		662
398	sub no_delay {	663	sub no_delay {
399	$_[0]{no_delay} = $_[1];	664	$_[0]{no_delay} = $_[1];
400		665
		666	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		667	if $_[0]{fh};
		668	}
		669
		670	=item $handle->keepalive ($boolean)
		671
		672	Enables or disables the C<keepalive> setting (see constructor argument of
		673	the same name for details).
		674
		675	=cut
		676
		677	sub keepalive {
		678	$_[0]{keepalive} = $_[1];
		679
401	eval {	680	eval {
402	local $SIG{__DIE__};	681	local $SIG{__DIE__};
403	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	682	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		683	if $_[0]{fh};
404	};	684	};
405	}	685	}
406		686
		687	=item $handle->oobinline ($boolean)
		688
		689	Enables or disables the C<oobinline> setting (see constructor argument of
		690	the same name for details).
		691
		692	=cut
		693
		694	sub oobinline {
		695	$_[0]{oobinline} = $_[1];
		696
		697	eval {
		698	local $SIG{__DIE__};
		699	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		700	if $_[0]{fh};
		701	};
		702	}
		703
		704	=item $handle->keepalive ($boolean)
		705
		706	Enables or disables the C<keepalive> setting (see constructor argument of
		707	the same name for details).
		708
		709	=cut
		710
		711	sub keepalive {
		712	$_[0]{keepalive} = $_[1];
		713
		714	eval {
		715	local $SIG{__DIE__};
		716	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		717	if $_[0]{fh};
		718	};
		719	}
		720
		721	=item $handle->on_starttls ($cb)
		722
		723	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		724
		725	=cut
		726
		727	sub on_starttls {
		728	$_[0]{on_starttls} = $_[1];
		729	}
		730
		731	=item $handle->on_stoptls ($cb)
		732
		733	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		734
		735	=cut
		736
		737	sub on_stoptls {
		738	$_[0]{on_stoptls} = $_[1];
		739	}
		740
		741	=item $handle->rbuf_max ($max_octets)
		742
		743	Configures the C<rbuf_max> setting (C<undef> disables it).
		744
		745	=cut
		746
		747	sub rbuf_max {
		748	$_[0]{rbuf_max} = $_[1];
		749	}
		750
407	#############################################################################	751	#############################################################################
408		752
409	=item $handle->timeout ($seconds)	753	=item $handle->timeout ($seconds)
410		754
		755	=item $handle->rtimeout ($seconds)
		756
		757	=item $handle->wtimeout ($seconds)
		758
411	Configures (or disables) the inactivity timeout.	759	Configures (or disables) the inactivity timeout.
412		760
413	=cut	761	=item $handle->timeout_reset
414		762
415	sub timeout {	763	=item $handle->rtimeout_reset
		764
		765	=item $handle->wtimeout_reset
		766
		767	Reset the activity timeout, as if data was received or sent.
		768
		769	These methods are cheap to call.
		770
		771	=cut
		772
		773	for my $dir ("", "r", "w") {
		774	my $timeout = "${dir}timeout";
		775	my $tw = "_${dir}tw";
		776	my $on_timeout = "on_${dir}timeout";
		777	my $activity = "_${dir}activity";
		778	my $cb;
		779
		780	*$on_timeout = sub {
		781	$_[0]{$on_timeout} = $_[1];
		782	};
		783
		784	*$timeout = sub {
416	my ($self, $timeout) = @_;	785	my ($self, $new_value) = @_;
417		786
		787	$new_value >= 0
		788	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		789
418	$self->{timeout} = $timeout;	790	$self->{$timeout} = $new_value;
419	$self->_timeout;	791	delete $self->{$tw}; &$cb;
420	}	792	};
421		793
		794	*{"${dir}timeout_reset"} = sub {
		795	$_[0]{$activity} = AE::now;
		796	};
		797
		798	# main workhorse:
422	# reset the timeout watcher, as neccessary	799	# reset the timeout watcher, as neccessary
423	# also check for time-outs	800	# also check for time-outs
424	sub _timeout {	801	$cb = sub {
425	my ($self) = @_;	802	my ($self) = @_;
426		803
427	if ($self->{timeout}) {	804	if ($self->{$timeout} && $self->{fh}) {
428	my $NOW = AnyEvent->now;	805	my $NOW = AE::now;
429		806
430	# when would the timeout trigger?	807	# when would the timeout trigger?
431	my $after = $self->{_activity} + $self->{timeout} - $NOW;	808	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
432		809
433	# now or in the past already?	810	# now or in the past already?
434	if ($after <= 0) {	811	if ($after <= 0) {
435	$self->{_activity} = $NOW;	812	$self->{$activity} = $NOW;
436		813
437	if ($self->{on_timeout}) {	814	if ($self->{$on_timeout}) {
438	$self->{on_timeout}($self);	815	$self->{$on_timeout}($self);
439	} else {	816	} else {
440	$self->_error (&Errno::ETIMEDOUT);	817	$self->_error (Errno::ETIMEDOUT);
		818	}
		819
		820	# callback could have changed timeout value, optimise
		821	return unless $self->{$timeout};
		822
		823	# calculate new after
		824	$after = $self->{$timeout};
441	}	825	}
442		826
443	# callback could have changed timeout value, optimise	827	Scalar::Util::weaken $self;
444	return unless $self->{timeout};	828	return unless $self; # ->error could have destroyed $self
445		829
446	# calculate new after	830	$self->{$tw} ||= AE::timer $after, 0, sub {
447	$after = $self->{timeout};	831	delete $self->{$tw};
		832	$cb->($self);
		833	};
		834	} else {
		835	delete $self->{$tw};
448	}	836	}
449
450	Scalar::Util::weaken $self;
451	return unless $self; # ->error could have destroyed $self
452
453	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
454	delete $self->{_tw};
455	$self->_timeout;
456	});
457	} else {
458	delete $self->{_tw};
459	}	837	}
460	}	838	}
461		839
462	#############################################################################	840	#############################################################################
463		841
…		…
478		856
479	=item $handle->on_drain ($cb)	857	=item $handle->on_drain ($cb)
480		858
481	Sets the C<on_drain> callback or clears it (see the description of	859	Sets the C<on_drain> callback or clears it (see the description of
482	C<on_drain> in the constructor).	860	C<on_drain> in the constructor).
		861
		862	This method may invoke callbacks (and therefore the handle might be
		863	destroyed after it returns).
483		864
484	=cut	865	=cut
485		866
486	sub on_drain {	867	sub on_drain {
487	my ($self, $cb) = @_;	868	my ($self, $cb) = @_;
…		…
496		877
497	Queues the given scalar to be written. You can push as much data as you	878	Queues the given scalar to be written. You can push as much data as you
498	want (only limited by the available memory), as C<AnyEvent::Handle>	879	want (only limited by the available memory), as C<AnyEvent::Handle>
499	buffers it independently of the kernel.	880	buffers it independently of the kernel.
500		881
		882	This method may invoke callbacks (and therefore the handle might be
		883	destroyed after it returns).
		884
501	=cut	885	=cut
502		886
503	sub _drain_wbuf {	887	sub _drain_wbuf {
504	my ($self) = @_;	888	my ($self) = @_;
505		889
…		…
508	Scalar::Util::weaken $self;	892	Scalar::Util::weaken $self;
509		893
510	my $cb = sub {	894	my $cb = sub {
511	my $len = syswrite $self->{fh}, $self->{wbuf};	895	my $len = syswrite $self->{fh}, $self->{wbuf};
512		896
513	if ($len >= 0) {	897	if (defined $len) {
514	substr $self->{wbuf}, 0, $len, "";	898	substr $self->{wbuf}, 0, $len, "";
515		899
516	$self->{_activity} = AnyEvent->now;	900	$self->{_activity} = $self->{_wactivity} = AE::now;
517		901
518	$self->{on_drain}($self)	902	$self->{on_drain}($self)
519	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})	903	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
520	&& $self->{on_drain};	904	&& $self->{on_drain};
521		905
…		…
527		911
528	# try to write data immediately	912	# try to write data immediately
529	$cb->() unless $self->{autocork};	913	$cb->() unless $self->{autocork};
530		914
531	# if still data left in wbuf, we need to poll	915	# if still data left in wbuf, we need to poll
532	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	916	$self->{_ww} = AE::io $self->{fh}, 1, $cb
533	if length $self->{wbuf};	917	if length $self->{wbuf};
534	};	918	};
535	}	919	}
536		920
537	our %WH;	921	our %WH;
538		922
		923	# deprecated
539	sub register_write_type($$) {	924	sub register_write_type($$) {
540	$WH{$_[0]} = $_[1];	925	$WH{$_[0]} = $_[1];
541	}	926	}
542		927
543	sub push_write {	928	sub push_write {
544	my $self = shift;	929	my $self = shift;
545		930
546	if (@_ > 1) {	931	if (@_ > 1) {
547	my $type = shift;	932	my $type = shift;
548		933
		934	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
549	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	935	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
550	->($self, @_);	936	->($self, @_);
551	}	937	}
552		938
		939	# we downgrade here to avoid hard-to-track-down bugs,
		940	# and diagnose the problem earlier and better.
		941
553	if ($self->{tls}) {	942	if ($self->{tls}) {
554	$self->{_tls_wbuf} .= $_[0];	943	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
555	&_dotls ($self);	944	&_dotls ($self) if $self->{fh};
556	} else {	945	} else {
557	$self->{wbuf} .= $_[0];	946	utf8::downgrade $self->{wbuf} .= $_[0];
558	$self->_drain_wbuf;	947	$self->_drain_wbuf if $self->{fh};
559	}	948	}
560	}	949	}
561		950
562	=item $handle->push_write (type => @args)	951	=item $handle->push_write (type => @args)
563		952
564	Instead of formatting your data yourself, you can also let this module do	953	Instead of formatting your data yourself, you can also let this module
565	the job by specifying a type and type-specific arguments.	954	do the job by specifying a type and type-specific arguments. You
		955	can also specify the (fully qualified) name of a package, in which
		956	case AnyEvent tries to load the package and then expects to find the
		957	C<anyevent_write_type> function inside (see "custom write types", below).
566		958
567	Predefined types are (if you have ideas for additional types, feel free to	959	Predefined types are (if you have ideas for additional types, feel free to
568	drop by and tell us):	960	drop by and tell us):
569		961
570	=over 4	962	=over 4
…		…
627	Other languages could read single lines terminated by a newline and pass	1019	Other languages could read single lines terminated by a newline and pass
628	this line into their JSON decoder of choice.	1020	this line into their JSON decoder of choice.
629		1021
630	=cut	1022	=cut
631		1023
		1024	sub json_coder() {
		1025	eval { require JSON::XS; JSON::XS->new->utf8 }
		1026	|| do { require JSON; JSON->new->utf8 }
		1027	}
		1028
632	register_write_type json => sub {	1029	register_write_type json => sub {
633	my ($self, $ref) = @_;	1030	my ($self, $ref) = @_;
634		1031
635	require JSON;	1032	my $json = $self->{json} ||= json_coder;
636		1033
637	$self->{json} ? $self->{json}->encode ($ref)	1034	$json->encode ($ref)
638	: JSON::encode_json ($ref)
639	};	1035	};
640		1036
641	=item storable => $reference	1037	=item storable => $reference
642		1038
643	Freezes the given reference using L<Storable> and writes it to the	1039	Freezes the given reference using L<Storable> and writes it to the
…		…
653	pack "w/a*", Storable::nfreeze ($ref)	1049	pack "w/a*", Storable::nfreeze ($ref)
654	};	1050	};
655		1051
656	=back	1052	=back
657		1053
658	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1054	=item $handle->push_shutdown
659		1055
660	This function (not method) lets you add your own types to C<push_write>.	1056	Sometimes you know you want to close the socket after writing your data
		1057	before it was actually written. One way to do that is to replace your
		1058	C<on_drain> handler by a callback that shuts down the socket (and set
		1059	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1060	replaces the C<on_drain> callback with:
		1061
		1062	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1063
		1064	This simply shuts down the write side and signals an EOF condition to the
		1065	the peer.
		1066
		1067	You can rely on the normal read queue and C<on_eof> handling
		1068	afterwards. This is the cleanest way to close a connection.
		1069
		1070	This method may invoke callbacks (and therefore the handle might be
		1071	destroyed after it returns).
		1072
		1073	=cut
		1074
		1075	sub push_shutdown {
		1076	my ($self) = @_;
		1077
		1078	delete $self->{low_water_mark};
		1079	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1080	}
		1081
		1082	=item custom write types - Package::anyevent_write_type $handle, @args
		1083
		1084	Instead of one of the predefined types, you can also specify the name of
		1085	a package. AnyEvent will try to load the package and then expects to find
		1086	a function named C<anyevent_write_type> inside. If it isn't found, it
		1087	progressively tries to load the parent package until it either finds the
		1088	function (good) or runs out of packages (bad).
		1089
661	Whenever the given C<type> is used, C<push_write> will invoke the code	1090	Whenever the given C<type> is used, C<push_write> will the function with
662	reference with the handle object and the remaining arguments.	1091	the handle object and the remaining arguments.
663		1092
664	The code reference is supposed to return a single octet string that will	1093	The function is supposed to return a single octet string that will be
665	be appended to the write buffer.	1094	appended to the write buffer, so you cna mentally treat this function as a
		1095	"arguments to on-the-wire-format" converter.
666		1096
667	Note that this is a function, and all types registered this way will be	1097	Example: implement a custom write type C<join> that joins the remaining
668	global, so try to use unique names.	1098	arguments using the first one.
		1099
		1100	$handle->push_write (My::Type => " ", 1,2,3);
		1101
		1102	# uses the following package, which can be defined in the "My::Type" or in
		1103	# the "My" modules to be auto-loaded, or just about anywhere when the
		1104	# My::Type::anyevent_write_type is defined before invoking it.
		1105
		1106	package My::Type;
		1107
		1108	sub anyevent_write_type {
		1109	my ($handle, $delim, @args) = @_;
		1110
		1111	join $delim, @args
		1112	}
669		1113
670	=cut	1114	=cut
671		1115
672	#############################################################################	1116	#############################################################################
673		1117
…		…
682	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1126	ways, the "simple" way, using only C<on_read> and the "complex" way, using
683	a queue.	1127	a queue.
684		1128
685	In the simple case, you just install an C<on_read> callback and whenever	1129	In the simple case, you just install an C<on_read> callback and whenever
686	new data arrives, it will be called. You can then remove some data (if	1130	new data arrives, it will be called. You can then remove some data (if
687	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna	1131	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
688	leave the data there if you want to accumulate more (e.g. when only a	1132	leave the data there if you want to accumulate more (e.g. when only a
689	partial message has been received so far).	1133	partial message has been received so far), or change the read queue with
		1134	e.g. C<push_read>.
690		1135
691	In the more complex case, you want to queue multiple callbacks. In this	1136	In the more complex case, you want to queue multiple callbacks. In this
692	case, AnyEvent::Handle will call the first queued callback each time new	1137	case, AnyEvent::Handle will call the first queued callback each time new
693	data arrives (also the first time it is queued) and removes it when it has	1138	data arrives (also the first time it is queued) and remove it when it has
694	done its job (see C<push_read>, below).	1139	done its job (see C<push_read>, below).
695		1140
696	This way you can, for example, push three line-reads, followed by reading	1141	This way you can, for example, push three line-reads, followed by reading
697	a chunk of data, and AnyEvent::Handle will execute them in order.	1142	a chunk of data, and AnyEvent::Handle will execute them in order.
698		1143
…		…
755	=cut	1200	=cut
756		1201
757	sub _drain_rbuf {	1202	sub _drain_rbuf {
758	my ($self) = @_;	1203	my ($self) = @_;
759		1204
		1205	# avoid recursion
		1206	return if $self->{_skip_drain_rbuf};
760	local $self->{_in_drain} = 1;	1207	local $self->{_skip_drain_rbuf} = 1;
761
762	if (
763	defined $self->{rbuf_max}
764	&& $self->{rbuf_max} < length $self->{rbuf}
765	) {
766	$self->_error (&Errno::ENOSPC, 1), return;
767	}
768		1208
769	while () {	1209	while () {
		1210	# we need to use a separate tls read buffer, as we must not receive data while
		1211	# we are draining the buffer, and this can only happen with TLS.
		1212	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1213	if exists $self->{_tls_rbuf};
		1214
770	my $len = length $self->{rbuf};	1215	my $len = length $self->{rbuf};
771		1216
772	if (my $cb = shift @{ $self->{_queue} }) {	1217	if (my $cb = shift @{ $self->{_queue} }) {
773	unless ($cb->($self)) {	1218	unless ($cb->($self)) {
774	if ($self->{_eof}) {	1219	# no progress can be made
775	# no progress can be made (not enough data and no data forthcoming)	1220	# (not enough data and no data forthcoming)
776	$self->_error (&Errno::EPIPE, 1), return;	1221	$self->_error (Errno::EPIPE, 1), return
777	}	1222	if $self->{_eof};
778		1223
779	unshift @{ $self->{_queue} }, $cb;	1224	unshift @{ $self->{_queue} }, $cb;
780	last;	1225	last;
781	}	1226	}
782	} elsif ($self->{on_read}) {	1227	} elsif ($self->{on_read}) {
…		…
789	&& !@{ $self->{_queue} } # and the queue is still empty	1234	&& !@{ $self->{_queue} } # and the queue is still empty
790	&& $self->{on_read} # but we still have on_read	1235	&& $self->{on_read} # but we still have on_read
791	) {	1236	) {
792	# no further data will arrive	1237	# no further data will arrive
793	# so no progress can be made	1238	# so no progress can be made
794	$self->_error (&Errno::EPIPE, 1), return	1239	$self->_error (Errno::EPIPE, 1), return
795	if $self->{_eof};	1240	if $self->{_eof};
796		1241
797	last; # more data might arrive	1242	last; # more data might arrive
798	}	1243	}
799	} else {	1244	} else {
…		…
802	last;	1247	last;
803	}	1248	}
804	}	1249	}
805		1250
806	if ($self->{_eof}) {	1251	if ($self->{_eof}) {
807	if ($self->{on_eof}) {	1252	$self->{on_eof}
808	$self->{on_eof}($self)	1253	? $self->{on_eof}($self)
809	} else {	1254	: $self->_error (0, 1, "Unexpected end-of-file");
810	$self->_error (0, 1);	1255
811	}	1256	return;
		1257	}
		1258
		1259	if (
		1260	defined $self->{rbuf_max}
		1261	&& $self->{rbuf_max} < length $self->{rbuf}
		1262	) {
		1263	$self->_error (Errno::ENOSPC, 1), return;
812	}	1264	}
813		1265
814	# may need to restart read watcher	1266	# may need to restart read watcher
815	unless ($self->{_rw}) {	1267	unless ($self->{_rw}) {
816	$self->start_read	1268	$self->start_read
…		…
822		1274
823	This replaces the currently set C<on_read> callback, or clears it (when	1275	This replaces the currently set C<on_read> callback, or clears it (when
824	the new callback is C<undef>). See the description of C<on_read> in the	1276	the new callback is C<undef>). See the description of C<on_read> in the
825	constructor.	1277	constructor.
826		1278
		1279	This method may invoke callbacks (and therefore the handle might be
		1280	destroyed after it returns).
		1281
827	=cut	1282	=cut
828		1283
829	sub on_read {	1284	sub on_read {
830	my ($self, $cb) = @_;	1285	my ($self, $cb) = @_;
831		1286
832	$self->{on_read} = $cb;	1287	$self->{on_read} = $cb;
833	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1288	$self->_drain_rbuf if $cb;
834	}	1289	}
835		1290
836	=item $handle->rbuf	1291	=item $handle->rbuf
837		1292
838	Returns the read buffer (as a modifiable lvalue).	1293	Returns the read buffer (as a modifiable lvalue). You can also access the
		1294	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1295	much faster, and no less clean).
839		1296
840	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1297	The only operation allowed on the read buffer (apart from looking at it)
841	you want.	1298	is removing data from its beginning. Otherwise modifying or appending to
		1299	it is not allowed and will lead to hard-to-track-down bugs.
842		1300
843	NOTE: The read buffer should only be used or modified if the C<on_read>,	1301	NOTE: The read buffer should only be used or modified in the C<on_read>
844	C<push_read> or C<unshift_read> methods are used. The other read methods	1302	callback or when C<push_read> or C<unshift_read> are used with a single
845	automatically manage the read buffer.	1303	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1304	will manage the read buffer on their own.
846		1305
847	=cut	1306	=cut
848		1307
849	sub rbuf : lvalue {	1308	sub rbuf : lvalue {
850	$_[0]{rbuf}	1309	$_[0]{rbuf}
…		…
867		1326
868	If enough data was available, then the callback must remove all data it is	1327	If enough data was available, then the callback must remove all data it is
869	interested in (which can be none at all) and return a true value. After returning	1328	interested in (which can be none at all) and return a true value. After returning
870	true, it will be removed from the queue.	1329	true, it will be removed from the queue.
871		1330
		1331	These methods may invoke callbacks (and therefore the handle might be
		1332	destroyed after it returns).
		1333
872	=cut	1334	=cut
873		1335
874	our %RH;	1336	our %RH;
875		1337
876	sub register_read_type($$) {	1338	sub register_read_type($$) {
…		…
882	my $cb = pop;	1344	my $cb = pop;
883		1345
884	if (@_) {	1346	if (@_) {
885	my $type = shift;	1347	my $type = shift;
886		1348
		1349	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
887	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1350	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
888	->($self, $cb, @_);	1351	->($self, $cb, @_);
889	}	1352	}
890		1353
891	push @{ $self->{_queue} }, $cb;	1354	push @{ $self->{_queue} }, $cb;
892	$self->_drain_rbuf unless $self->{_in_drain};	1355	$self->_drain_rbuf;
893	}	1356	}
894		1357
895	sub unshift_read {	1358	sub unshift_read {
896	my $self = shift;	1359	my $self = shift;
897	my $cb = pop;	1360	my $cb = pop;
898		1361
899	if (@_) {	1362	if (@_) {
900	my $type = shift;	1363	my $type = shift;
901		1364
		1365	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
902	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1366	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
903	->($self, $cb, @_);	1367	->($self, $cb, @_);
904	}	1368	}
905		1369
906
907	unshift @{ $self->{_queue} }, $cb;	1370	unshift @{ $self->{_queue} }, $cb;
908	$self->_drain_rbuf unless $self->{_in_drain};	1371	$self->_drain_rbuf;
909	}	1372	}
910		1373
911	=item $handle->push_read (type => @args, $cb)	1374	=item $handle->push_read (type => @args, $cb)
912		1375
913	=item $handle->unshift_read (type => @args, $cb)	1376	=item $handle->unshift_read (type => @args, $cb)
914		1377
915	Instead of providing a callback that parses the data itself you can chose	1378	Instead of providing a callback that parses the data itself you can chose
916	between a number of predefined parsing formats, for chunks of data, lines	1379	between a number of predefined parsing formats, for chunks of data, lines
917	etc.	1380	etc. You can also specify the (fully qualified) name of a package, in
		1381	which case AnyEvent tries to load the package and then expects to find the
		1382	C<anyevent_read_type> function inside (see "custom read types", below).
918		1383
919	Predefined types are (if you have ideas for additional types, feel free to	1384	Predefined types are (if you have ideas for additional types, feel free to
920	drop by and tell us):	1385	drop by and tell us):
921		1386
922	=over 4	1387	=over 4
…		…
1014	the receive buffer when neither C<$accept> nor C<$reject> match,	1479	the receive buffer when neither C<$accept> nor C<$reject> match,
1015	and everything preceding and including the match will be accepted	1480	and everything preceding and including the match will be accepted
1016	unconditionally. This is useful to skip large amounts of data that you	1481	unconditionally. This is useful to skip large amounts of data that you
1017	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1482	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
1018	have to start matching from the beginning. This is purely an optimisation	1483	have to start matching from the beginning. This is purely an optimisation
1019	and is usually worth only when you expect more than a few kilobytes.	1484	and is usually worth it only when you expect more than a few kilobytes.
1020		1485
1021	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1486	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
1022	expect the header to be very large (it isn't in practise, but...), we use	1487	expect the header to be very large (it isn't in practice, but...), we use
1023	a skip regex to skip initial portions. The skip regex is tricky in that	1488	a skip regex to skip initial portions. The skip regex is tricky in that
1024	it only accepts something not ending in either \015 or \012, as these are	1489	it only accepts something not ending in either \015 or \012, as these are
1025	required for the accept regex.	1490	required for the accept regex.
1026		1491
1027	$handle->push_read (regex =>	1492	$handle->push_read (regex =>
…		…
1046	return 1;	1511	return 1;
1047	}	1512	}
1048		1513
1049	# reject	1514	# reject
1050	if ($reject && $$rbuf =~ $reject) {	1515	if ($reject && $$rbuf =~ $reject) {
1051	$self->_error (&Errno::EBADMSG);	1516	$self->_error (Errno::EBADMSG);
1052	}	1517	}
1053		1518
1054	# skip	1519	# skip
1055	if ($skip && $$rbuf =~ $skip) {	1520	if ($skip && $$rbuf =~ $skip) {
1056	$data .= substr $$rbuf, 0, $+[0], "";	1521	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1072	my ($self, $cb) = @_;	1537	my ($self, $cb) = @_;
1073		1538
1074	sub {	1539	sub {
1075	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1540	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1076	if ($_[0]{rbuf} =~ /[^0-9]/) {	1541	if ($_[0]{rbuf} =~ /[^0-9]/) {
1077	$self->_error (&Errno::EBADMSG);	1542	$self->_error (Errno::EBADMSG);
1078	}	1543	}
1079	return;	1544	return;
1080	}	1545	}
1081		1546
1082	my $len = $1;	1547	my $len = $1;
…		…
1085	my $string = $_[1];	1550	my $string = $_[1];
1086	$_[0]->unshift_read (chunk => 1, sub {	1551	$_[0]->unshift_read (chunk => 1, sub {
1087	if ($_[1] eq ",") {	1552	if ($_[1] eq ",") {
1088	$cb->($_[0], $string);	1553	$cb->($_[0], $string);
1089	} else {	1554	} else {
1090	$self->_error (&Errno::EBADMSG);	1555	$self->_error (Errno::EBADMSG);
1091	}	1556	}
1092	});	1557	});
1093	});	1558	});
1094		1559
1095	1	1560	1
…		…
1142	}	1607	}
1143	};	1608	};
1144		1609
1145	=item json => $cb->($handle, $hash_or_arrayref)	1610	=item json => $cb->($handle, $hash_or_arrayref)
1146		1611
1147	Reads a JSON object or array, decodes it and passes it to the callback.	1612	Reads a JSON object or array, decodes it and passes it to the
		1613	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1148		1614
1149	If a C<json> object was passed to the constructor, then that will be used	1615	If a C<json> object was passed to the constructor, then that will be used
1150	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1616	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1151		1617
1152	This read type uses the incremental parser available with JSON version	1618	This read type uses the incremental parser available with JSON version
…		…
1161	=cut	1627	=cut
1162		1628
1163	register_read_type json => sub {	1629	register_read_type json => sub {
1164	my ($self, $cb) = @_;	1630	my ($self, $cb) = @_;
1165		1631
1166	require JSON;	1632	my $json = $self->{json} ||= json_coder;
1167		1633
1168	my $data;	1634	my $data;
1169	my $rbuf = \$self->{rbuf};	1635	my $rbuf = \$self->{rbuf};
1170		1636
1171	my $json = $self->{json} ||= JSON->new->utf8;
1172
1173	sub {	1637	sub {
1174	my $ref = $json->incr_parse ($self->{rbuf});	1638	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1175		1639
1176	if ($ref) {	1640	if ($ref) {
1177	$self->{rbuf} = $json->incr_text;	1641	$self->{rbuf} = $json->incr_text;
1178	$json->incr_text = "";	1642	$json->incr_text = "";
1179	$cb->($self, $ref);	1643	$cb->($self, $ref);
1180		1644
1181	1	1645	1
		1646	} elsif ($@) {
		1647	# error case
		1648	$json->incr_skip;
		1649
		1650	$self->{rbuf} = $json->incr_text;
		1651	$json->incr_text = "";
		1652
		1653	$self->_error (Errno::EBADMSG);
		1654
		1655	()
1182	} else {	1656	} else {
1183	$self->{rbuf} = "";	1657	$self->{rbuf} = "";
		1658
1184	()	1659	()
1185	}	1660	}
1186	}	1661	}
1187	};	1662	};
1188		1663
…		…
1220	# read remaining chunk	1695	# read remaining chunk
1221	$_[0]->unshift_read (chunk => $len, sub {	1696	$_[0]->unshift_read (chunk => $len, sub {
1222	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1697	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1223	$cb->($_[0], $ref);	1698	$cb->($_[0], $ref);
1224	} else {	1699	} else {
1225	$self->_error (&Errno::EBADMSG);	1700	$self->_error (Errno::EBADMSG);
1226	}	1701	}
1227	});	1702	});
1228	}	1703	}
1229		1704
1230	1	1705	1
1231	}	1706	}
1232	};	1707	};
1233		1708
1234	=back	1709	=back
1235		1710
1236	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1711	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1237		1712
1238	This function (not method) lets you add your own types to C<push_read>.	1713	Instead of one of the predefined types, you can also specify the name
		1714	of a package. AnyEvent will try to load the package and then expects to
		1715	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1716	progressively tries to load the parent package until it either finds the
		1717	function (good) or runs out of packages (bad).
1239		1718
1240	Whenever the given C<type> is used, C<push_read> will invoke the code	1719	Whenever this type is used, C<push_read> will invoke the function with the
1241	reference with the handle object, the callback and the remaining	1720	handle object, the original callback and the remaining arguments.
1242	arguments.
1243		1721
1244	The code reference is supposed to return a callback (usually a closure)	1722	The function is supposed to return a callback (usually a closure) that
1245	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1723	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1724	mentally treat the function as a "configurable read type to read callback"
		1725	converter.
1246		1726
1247	It should invoke the passed callback when it is done reading (remember to	1727	It should invoke the original callback when it is done reading (remember
1248	pass C<$handle> as first argument as all other callbacks do that).	1728	to pass C<$handle> as first argument as all other callbacks do that,
		1729	although there is no strict requirement on this).
1249		1730
1250	Note that this is a function, and all types registered this way will be
1251	global, so try to use unique names.
1252
1253	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1731	For examples, see the source of this module (F<perldoc -m
1254	search for C<register_read_type>)).	1732	AnyEvent::Handle>, search for C<register_read_type>)).
1255		1733
1256	=item $handle->stop_read	1734	=item $handle->stop_read
1257		1735
1258	=item $handle->start_read	1736	=item $handle->start_read
1259		1737
…		…
1279	}	1757	}
1280		1758
1281	sub start_read {	1759	sub start_read {
1282	my ($self) = @_;	1760	my ($self) = @_;
1283		1761
1284	unless ($self->{_rw} || $self->{_eof}) {	1762	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1285	Scalar::Util::weaken $self;	1763	Scalar::Util::weaken $self;
1286		1764
1287	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1765	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1288	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});	1766	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1289	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1767	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1290		1768
1291	if ($len > 0) {	1769	if ($len > 0) {
1292	$self->{_activity} = AnyEvent->now;	1770	$self->{_activity} = $self->{_ractivity} = AE::now;
1293		1771
1294	if ($self->{tls}) {	1772	if ($self->{tls}) {
1295	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);	1773	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
		1774
1296	&_dotls ($self);	1775	&_dotls ($self);
1297	} else {	1776	} else {
1298	$self->_drain_rbuf unless $self->{_in_drain};	1777	$self->_drain_rbuf;
		1778	}
		1779
		1780	if ($len == $self->{read_size}) {
		1781	$self->{read_size} *= 2;
		1782	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		1783	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
1299	}	1784	}
1300		1785
1301	} elsif (defined $len) {	1786	} elsif (defined $len) {
1302	delete $self->{_rw};	1787	delete $self->{_rw};
1303	$self->{_eof} = 1;	1788	$self->{_eof} = 1;
1304	$self->_drain_rbuf unless $self->{_in_drain};	1789	$self->_drain_rbuf;
1305		1790
1306	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1791	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1307	return $self->_error ($!, 1);	1792	return $self->_error ($!, 1);
1308	}	1793	}
1309	});	1794	};
1310	}	1795	}
1311	}	1796	}
1312		1797
		1798	our $ERROR_SYSCALL;
		1799	our $ERROR_WANT_READ;
		1800
		1801	sub _tls_error {
		1802	my ($self, $err) = @_;
		1803
		1804	return $self->_error ($!, 1)
		1805	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1806
		1807	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1808
		1809	# reduce error string to look less scary
		1810	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1811
		1812	if ($self->{_on_starttls}) {
		1813	(delete $self->{_on_starttls})->($self, undef, $err);
		1814	&_freetls;
		1815	} else {
		1816	&_freetls;
		1817	$self->_error (Errno::EPROTO, 1, $err);
		1818	}
		1819	}
		1820
		1821	# poll the write BIO and send the data if applicable
		1822	# also decode read data if possible
		1823	# this is basiclaly our TLS state machine
		1824	# more efficient implementations are possible with openssl,
		1825	# but not with the buggy and incomplete Net::SSLeay.
1313	sub _dotls {	1826	sub _dotls {
1314	my ($self) = @_;	1827	my ($self) = @_;
1315		1828
1316	my $buf;	1829	my $tmp;
1317		1830
1318	if (length $self->{_tls_wbuf}) {	1831	if (length $self->{_tls_wbuf}) {
1319	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1832	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1320	substr $self->{_tls_wbuf}, 0, $len, "";	1833	substr $self->{_tls_wbuf}, 0, $tmp, "";
1321	}	1834	}
1322	}
1323		1835
		1836	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1837	return $self->_tls_error ($tmp)
		1838	if $tmp != $ERROR_WANT_READ
		1839	&& ($tmp != $ERROR_SYSCALL || $!);
		1840	}
		1841
1324	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1842	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1325	unless (length $buf) {	1843	unless (length $tmp) {
1326	# let's treat SSL-eof as we treat normal EOF	1844	$self->{_on_starttls}
1327	delete $self->{_rw};	1845	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
1328	$self->{_eof} = 1;
1329	&_freetls;	1846	&_freetls;
		1847
		1848	if ($self->{on_stoptls}) {
		1849	$self->{on_stoptls}($self);
		1850	return;
		1851	} else {
		1852	# let's treat SSL-eof as we treat normal EOF
		1853	delete $self->{_rw};
		1854	$self->{_eof} = 1;
		1855	}
1330	}	1856	}
1331		1857
1332	$self->{rbuf} .= $buf;	1858	$self->{_tls_rbuf} .= $tmp;
1333	$self->_drain_rbuf unless $self->{_in_drain};	1859	$self->_drain_rbuf;
1334	$self->{tls} or return; # tls session might have gone away in callback	1860	$self->{tls} or return; # tls session might have gone away in callback
1335	}	1861	}
1336		1862
1337	my $err = Net::SSLeay::get_error ($self->{tls}, -1);	1863	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1338
1339	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1340	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1341	return $self->_error ($!, 1);	1864	return $self->_tls_error ($tmp)
1342	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {	1865	if $tmp != $ERROR_WANT_READ
1343	return $self->_error (&Errno::EIO, 1);	1866	&& ($tmp != $ERROR_SYSCALL || $!);
1344	}
1345		1867
1346	# all others are fine for our purposes
1347	}
1348
1349	while (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1868	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1350	$self->{wbuf} .= $buf;	1869	$self->{wbuf} .= $tmp;
1351	$self->_drain_wbuf;	1870	$self->_drain_wbuf;
		1871	$self->{tls} or return; # tls session might have gone away in callback
1352	}	1872	}
		1873
		1874	$self->{_on_starttls}
		1875	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
		1876	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1353	}	1877	}
1354		1878
1355	=item $handle->starttls ($tls[, $tls_ctx])	1879	=item $handle->starttls ($tls[, $tls_ctx])
1356		1880
1357	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1881	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1358	object is created, you can also do that at a later time by calling	1882	object is created, you can also do that at a later time by calling
1359	C<starttls>.	1883	C<starttls>.
1360		1884
		1885	Starting TLS is currently an asynchronous operation - when you push some
		1886	write data and then call C<< ->starttls >> then TLS negotiation will start
		1887	immediately, after which the queued write data is then sent.
		1888
1361	The first argument is the same as the C<tls> constructor argument (either	1889	The first argument is the same as the C<tls> constructor argument (either
1362	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1890	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1363		1891
1364	The second argument is the optional C<Net::SSLeay::CTX> object that is	1892	The second argument is the optional C<AnyEvent::TLS> object that is used
1365	used when AnyEvent::Handle has to create its own TLS connection object.	1893	when AnyEvent::Handle has to create its own TLS connection object, or
		1894	a hash reference with C<< key => value >> pairs that will be used to
		1895	construct a new context.
1366		1896
1367	The TLS connection object will end up in C<< $handle->{tls} >> after this	1897	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1368	call and can be used or changed to your liking. Note that the handshake	1898	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1369	might have already started when this function returns.	1899	changed to your liking. Note that the handshake might have already started
		1900	when this function returns.
1370		1901
1371	If it an error to start a TLS handshake more than once per	1902	Due to bugs in OpenSSL, it might or might not be possible to do multiple
1372	AnyEvent::Handle object (this is due to bugs in OpenSSL).	1903	handshakes on the same stream. It is best to not attempt to use the
		1904	stream after stopping TLS.
1373		1905
		1906	This method may invoke callbacks (and therefore the handle might be
		1907	destroyed after it returns).
		1908
1374	=cut	1909	=cut
		1910
		1911	our %TLS_CACHE; #TODO not yet documented, should we?
1375		1912
1376	sub starttls {	1913	sub starttls {
1377	my ($self, $ssl, $ctx) = @_;	1914	my ($self, $tls, $ctx) = @_;
		1915
		1916	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1917	if $self->{tls};
		1918
		1919	$self->{tls} = $tls;
		1920	$self->{tls_ctx} = $ctx if @_ > 2;
		1921
		1922	return unless $self->{fh};
1378		1923
1379	require Net::SSLeay;	1924	require Net::SSLeay;
1380		1925
1381	Carp::croak "it is an error to call starttls more than once on an Anyevent::Handle object"	1926	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1382	if $self->{tls};	1927	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1928
		1929	$tls = delete $self->{tls};
		1930	$ctx = $self->{tls_ctx};
		1931
		1932	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1933
		1934	if ("HASH" eq ref $ctx) {
		1935	require AnyEvent::TLS;
		1936
		1937	if ($ctx->{cache}) {
		1938	my $key = $ctx+0;
		1939	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1940	} else {
		1941	$ctx = new AnyEvent::TLS %$ctx;
		1942	}
		1943	}
1383		1944
1384	if ($ssl eq "accept") {	1945	$self->{tls_ctx} = $ctx || TLS_CTX ();
1385	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1946	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1386	Net::SSLeay::set_accept_state ($ssl);
1387	} elsif ($ssl eq "connect") {
1388	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());
1389	Net::SSLeay::set_connect_state ($ssl);
1390	}
1391
1392	$self->{tls} = $ssl;
1393		1947
1394	# basically, this is deep magic (because SSL_read should have the same issues)	1948	# basically, this is deep magic (because SSL_read should have the same issues)
1395	# but the openssl maintainers basically said: "trust us, it just works".	1949	# but the openssl maintainers basically said: "trust us, it just works".
1396	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1950	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1397	# and mismaintained ssleay-module doesn't even offer them).	1951	# and mismaintained ssleay-module doesn't even offer them).
…		…
1401	#	1955	#
1402	# note that we do not try to keep the length constant between writes as we are required to do.	1956	# note that we do not try to keep the length constant between writes as we are required to do.
1403	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	1957	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1404	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to	1958	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
1405	# have identity issues in that area.	1959	# have identity issues in that area.
1406	Net::SSLeay::CTX_set_mode ($self->{tls},	1960	# Net::SSLeay::CTX_set_mode ($ssl,
1407	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1961	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1408	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1962	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1963	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1409		1964
1410	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1965	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1411	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1966	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1412		1967
		1968	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1969
1413	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1970	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
		1971
		1972	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
		1973	if $self->{on_starttls};
1414		1974
1415	&_dotls; # need to trigger the initial handshake	1975	&_dotls; # need to trigger the initial handshake
1416	$self->start_read; # make sure we actually do read	1976	$self->start_read; # make sure we actually do read
1417	}	1977	}
1418		1978
1419	=item $handle->stoptls	1979	=item $handle->stoptls
1420		1980
1421	Shuts down the SSL connection - this makes a proper EOF handshake by	1981	Shuts down the SSL connection - this makes a proper EOF handshake by
1422	sending a close notify to the other side, but since OpenSSL doesn't	1982	sending a close notify to the other side, but since OpenSSL doesn't
1423	support non-blocking shut downs, it is not possible to re-use the stream	1983	support non-blocking shut downs, it is not guaranteed that you can re-use
1424	afterwards.	1984	the stream afterwards.
		1985
		1986	This method may invoke callbacks (and therefore the handle might be
		1987	destroyed after it returns).
1425		1988
1426	=cut	1989	=cut
1427		1990
1428	sub stoptls {	1991	sub stoptls {
1429	my ($self) = @_;	1992	my ($self) = @_;
1430		1993
1431	if ($self->{tls}) {	1994	if ($self->{tls} && $self->{fh}) {
1432	Net::SSLeay::shutdown ($self->{tls});	1995	Net::SSLeay::shutdown ($self->{tls});
1433		1996
1434	&_dotls;	1997	&_dotls;
1435		1998
1436	# we don't give a shit. no, we do, but we can't. no...	1999	# # we don't give a shit. no, we do, but we can't. no...#d#
1437	# we, we... have to use openssl :/	2000	# # we, we... have to use openssl :/#d#
1438	&_freetls;	2001	# &_freetls;#d#
1439	}	2002	}
1440	}	2003	}
1441		2004
1442	sub _freetls {	2005	sub _freetls {
1443	my ($self) = @_;	2006	my ($self) = @_;
1444		2007
1445	return unless $self->{tls};	2008	return unless $self->{tls};
1446		2009
1447	Net::SSLeay::free (delete $self->{tls});	2010	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2011	if $self->{tls} > 0;
1448		2012
1449	delete @$self{qw(_rbio _wbio _tls_wbuf)};	2013	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1450	}	2014	}
1451		2015
1452	sub DESTROY {	2016	sub DESTROY {
1453	my $self = shift;	2017	my ($self) = @_;
1454		2018
1455	&_freetls;	2019	&_freetls;
1456		2020
1457	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2021	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1458		2022
1459	if ($linger && length $self->{wbuf}) {	2023	if ($linger && length $self->{wbuf} && $self->{fh}) {
1460	my $fh = delete $self->{fh};	2024	my $fh = delete $self->{fh};
1461	my $wbuf = delete $self->{wbuf};	2025	my $wbuf = delete $self->{wbuf};
1462		2026
1463	my @linger;	2027	my @linger;
1464		2028
1465	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2029	push @linger, AE::io $fh, 1, sub {
1466	my $len = syswrite $fh, $wbuf, length $wbuf;	2030	my $len = syswrite $fh, $wbuf, length $wbuf;
1467		2031
1468	if ($len > 0) {	2032	if ($len > 0) {
1469	substr $wbuf, 0, $len, "";	2033	substr $wbuf, 0, $len, "";
1470	} else {	2034	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK)) {
1471	@linger = (); # end	2035	@linger = (); # end
1472	}	2036	}
1473	});	2037	};
1474	push @linger, AnyEvent->timer (after => $linger, cb => sub {	2038	push @linger, AE::timer $linger, 0, sub {
1475	@linger = ();	2039	@linger = ();
1476	});	2040	};
1477	}	2041	}
1478	}	2042	}
		2043
		2044	=item $handle->destroy
		2045
		2046	Shuts down the handle object as much as possible - this call ensures that
		2047	no further callbacks will be invoked and as many resources as possible
		2048	will be freed. Any method you will call on the handle object after
		2049	destroying it in this way will be silently ignored (and it will return the
		2050	empty list).
		2051
		2052	Normally, you can just "forget" any references to an AnyEvent::Handle
		2053	object and it will simply shut down. This works in fatal error and EOF
		2054	callbacks, as well as code outside. It does I<NOT> work in a read or write
		2055	callback, so when you want to destroy the AnyEvent::Handle object from
		2056	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		2057	that case.
		2058
		2059	Destroying the handle object in this way has the advantage that callbacks
		2060	will be removed as well, so if those are the only reference holders (as
		2061	is common), then one doesn't need to do anything special to break any
		2062	reference cycles.
		2063
		2064	The handle might still linger in the background and write out remaining
		2065	data, as specified by the C<linger> option, however.
		2066
		2067	=cut
		2068
		2069	sub destroy {
		2070	my ($self) = @_;
		2071
		2072	$self->DESTROY;
		2073	%$self = ();
		2074	bless $self, "AnyEvent::Handle::destroyed";
		2075	}
		2076
		2077	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2078	#nop
		2079	}
		2080
		2081	=item $handle->destroyed
		2082
		2083	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2084	->destroy >>, true otherwise.
		2085
		2086	Can be useful to decide whether the handle is still valid after some
		2087	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2088	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2089	can destroy the handle, so work can be avoided by checking sometimes:
		2090
		2091	$hdl->starttls ("accept");
		2092	return if $hdl->destroyed;
		2093	$hdl->push_write (...
		2094
		2095	Note that the call to C<push_write> will silently be ignored if the handle
		2096	has been destroyed, so often you can just ignore the possibility of the
		2097	handle being destroyed.
		2098
		2099	=cut
		2100
		2101	sub destroyed { 0 }
		2102	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1479		2103
1480	=item AnyEvent::Handle::TLS_CTX	2104	=item AnyEvent::Handle::TLS_CTX
1481		2105
1482	This function creates and returns the Net::SSLeay::CTX object used by	2106	This function creates and returns the AnyEvent::TLS object used by default
1483	default for TLS mode.	2107	for TLS mode.
1484		2108
1485	The context is created like this:	2109	The context is created by calling L<AnyEvent::TLS> without any arguments.
1486
1487	Net::SSLeay::load_error_strings;
1488	Net::SSLeay::SSLeay_add_ssl_algorithms;
1489	Net::SSLeay::randomize;
1490
1491	my $CTX = Net::SSLeay::CTX_new;
1492
1493	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1494		2110
1495	=cut	2111	=cut
1496		2112
1497	our $TLS_CTX;	2113	our $TLS_CTX;
1498		2114
1499	sub TLS_CTX() {	2115	sub TLS_CTX() {
1500	$TLS_CTX || do {	2116	$TLS_CTX ||= do {
1501	require Net::SSLeay;	2117	require AnyEvent::TLS;
1502		2118
1503	Net::SSLeay::load_error_strings ();	2119	new AnyEvent::TLS
1504	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1505	Net::SSLeay::randomize ();
1506
1507	$TLS_CTX = Net::SSLeay::CTX_new ();
1508
1509	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1510
1511	$TLS_CTX
1512	}	2120	}
1513	}	2121	}
1514		2122
1515	=back	2123	=back
1516		2124
1517		2125
1518	=head1 NONFREQUENTLY ASKED QUESTIONS	2126	=head1 NONFREQUENTLY ASKED QUESTIONS
1519		2127
1520	=over 4	2128	=over 4
		2129
		2130	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2131	still get further invocations!
		2132
		2133	That's because AnyEvent::Handle keeps a reference to itself when handling
		2134	read or write callbacks.
		2135
		2136	It is only safe to "forget" the reference inside EOF or error callbacks,
		2137	from within all other callbacks, you need to explicitly call the C<<
		2138	->destroy >> method.
		2139
		2140	=item I get different callback invocations in TLS mode/Why can't I pause
		2141	reading?
		2142
		2143	Unlike, say, TCP, TLS connections do not consist of two independent
		2144	communication channels, one for each direction. Or put differently, the
		2145	read and write directions are not independent of each other: you cannot
		2146	write data unless you are also prepared to read, and vice versa.
		2147
		2148	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
		2149	callback invocations when you are not expecting any read data - the reason
		2150	is that AnyEvent::Handle always reads in TLS mode.
		2151
		2152	During the connection, you have to make sure that you always have a
		2153	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2154	connection (or when you no longer want to use it) you can call the
		2155	C<destroy> method.
1521		2156
1522	=item How do I read data until the other side closes the connection?	2157	=item How do I read data until the other side closes the connection?
1523		2158
1524	If you just want to read your data into a perl scalar, the easiest way	2159	If you just want to read your data into a perl scalar, the easiest way
1525	to achieve this is by setting an C<on_read> callback that does nothing,	2160	to achieve this is by setting an C<on_read> callback that does nothing,
…		…
1528		2163
1529	$handle->on_read (sub { });	2164	$handle->on_read (sub { });
1530	$handle->on_eof (undef);	2165	$handle->on_eof (undef);
1531	$handle->on_error (sub {	2166	$handle->on_error (sub {
1532	my $data = delete $_[0]{rbuf};	2167	my $data = delete $_[0]{rbuf};
1533	undef $handle;
1534	});	2168	});
1535		2169
1536	The reason to use C<on_error> is that TCP connections, due to latencies	2170	The reason to use C<on_error> is that TCP connections, due to latencies
1537	and packets loss, might get closed quite violently with an error, when in	2171	and packets loss, might get closed quite violently with an error, when in
1538	fact, all data has been received.	2172	fact all data has been received.
1539		2173
1540	It is usually better to use acknowledgements when transfering data,	2174	It is usually better to use acknowledgements when transferring data,
1541	to make sure the other side hasn't just died and you got the data	2175	to make sure the other side hasn't just died and you got the data
1542	intact. This is also one reason why so many internet protocols have an	2176	intact. This is also one reason why so many internet protocols have an
1543	explicit QUIT command.	2177	explicit QUIT command.
1544
1545		2178
1546	=item I don't want to destroy the handle too early - how do I wait until	2179	=item I don't want to destroy the handle too early - how do I wait until
1547	all data has been written?	2180	all data has been written?
1548		2181
1549	After writing your last bits of data, set the C<on_drain> callback	2182	After writing your last bits of data, set the C<on_drain> callback
…		…
1555	$handle->on_drain (sub {	2188	$handle->on_drain (sub {
1556	warn "all data submitted to the kernel\n";	2189	warn "all data submitted to the kernel\n";
1557	undef $handle;	2190	undef $handle;
1558	});	2191	});
1559		2192
		2193	If you just want to queue some data and then signal EOF to the other side,
		2194	consider using C<< ->push_shutdown >> instead.
		2195
		2196	=item I want to contact a TLS/SSL server, I don't care about security.
		2197
		2198	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2199	connect to it and then create the AnyEvent::Handle with the C<tls>
		2200	parameter:
		2201
		2202	tcp_connect $host, $port, sub {
		2203	my ($fh) = @_;
		2204
		2205	my $handle = new AnyEvent::Handle
		2206	fh => $fh,
		2207	tls => "connect",
		2208	on_error => sub { ... };
		2209
		2210	$handle->push_write (...);
		2211	};
		2212
		2213	=item I want to contact a TLS/SSL server, I do care about security.
		2214
		2215	Then you should additionally enable certificate verification, including
		2216	peername verification, if the protocol you use supports it (see
		2217	L<AnyEvent::TLS>, C<verify_peername>).
		2218
		2219	E.g. for HTTPS:
		2220
		2221	tcp_connect $host, $port, sub {
		2222	my ($fh) = @_;
		2223
		2224	my $handle = new AnyEvent::Handle
		2225	fh => $fh,
		2226	peername => $host,
		2227	tls => "connect",
		2228	tls_ctx => { verify => 1, verify_peername => "https" },
		2229	...
		2230
		2231	Note that you must specify the hostname you connected to (or whatever
		2232	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2233	peername verification will be done.
		2234
		2235	The above will use the system-dependent default set of trusted CA
		2236	certificates. If you want to check against a specific CA, add the
		2237	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2238
		2239	tls_ctx => {
		2240	verify => 1,
		2241	verify_peername => "https",
		2242	ca_file => "my-ca-cert.pem",
		2243	},
		2244
		2245	=item I want to create a TLS/SSL server, how do I do that?
		2246
		2247	Well, you first need to get a server certificate and key. You have
		2248	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2249	self-signed certificate (cheap. check the search engine of your choice,
		2250	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2251	nice program for that purpose).
		2252
		2253	Then create a file with your private key (in PEM format, see
		2254	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2255	file should then look like this:
		2256
		2257	-----BEGIN RSA PRIVATE KEY-----
		2258	...header data
		2259	... lots of base64'y-stuff
		2260	-----END RSA PRIVATE KEY-----
		2261
		2262	-----BEGIN CERTIFICATE-----
		2263	... lots of base64'y-stuff
		2264	-----END CERTIFICATE-----
		2265
		2266	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2267	specify this file as C<cert_file>:
		2268
		2269	tcp_server undef, $port, sub {
		2270	my ($fh) = @_;
		2271
		2272	my $handle = new AnyEvent::Handle
		2273	fh => $fh,
		2274	tls => "accept",
		2275	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2276	...
		2277
		2278	When you have intermediate CA certificates that your clients might not
		2279	know about, just append them to the C<cert_file>.
		2280
1560	=back	2281	=back
1561		2282
1562		2283
1563	=head1 SUBCLASSING AnyEvent::Handle	2284	=head1 SUBCLASSING AnyEvent::Handle
1564		2285
…		…
1583		2304
1584	=item * all members not documented here and not prefixed with an underscore	2305	=item * all members not documented here and not prefixed with an underscore
1585	are free to use in subclasses.	2306	are free to use in subclasses.
1586		2307
1587	Of course, new versions of AnyEvent::Handle may introduce more "public"	2308	Of course, new versions of AnyEvent::Handle may introduce more "public"
1588	member variables, but thats just life, at least it is documented.	2309	member variables, but that's just life. At least it is documented.
1589		2310
1590	=back	2311	=back
1591		2312
1592	=head1 AUTHOR	2313	=head1 AUTHOR
1593		2314

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines