ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.99 by root, Thu Oct 23 02:41:00 2008 UTC vs.
Revision 1.243 by root, Mon Mar 16 08:15:46 2015 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.3;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	AE::log error => $msg;
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	say "got line <$line>";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes, and other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, where the documentation refers to "bytes", it means
58	means characters. As sysread and syswrite are used for all I/O, their	42	characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
60		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EWOULDBLOCK EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
		80	sub MAX_READ_SIZE() { 131072 }
		81
64	=head1 METHODS	82	=head1 METHODS
65		83
66	=over 4	84	=over 4
67		85
68	=item B<new (%args)>	86	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
69		87
70	The constructor supports these arguments (all as key => value pairs).	88	The constructor supports these arguments (all as C<< key => value >> pairs).
71		89
72	=over 4	90	=over 4
73		91
74	=item fh => $filehandle [MANDATORY]	92	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
75		93
76	The filehandle this L<AnyEvent::Handle> object will operate on.	94	The filehandle this L<AnyEvent::Handle> object will operate on.
77
78	NOTE: The filehandle will be set to non-blocking mode (using	95	NOTE: The filehandle will be set to non-blocking mode (using
79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	96	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
80	that mode.	97	that mode.
81		98
		99	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		100
		101	Try to connect to the specified host and service (port), using
		102	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		103	default C<peername>.
		104
		105	You have to specify either this parameter, or C<fh>, above.
		106
		107	It is possible to push requests on the read and write queues, and modify
		108	properties of the stream, even while AnyEvent::Handle is connecting.
		109
		110	When this parameter is specified, then the C<on_prepare>,
		111	C<on_connect_error> and C<on_connect> callbacks will be called under the
		112	appropriate circumstances:
		113
		114	=over 4
		115
82	=item on_eof => $cb->($handle)	116	=item on_prepare => $cb->($handle)
83		117
84	Set the callback to be called when an end-of-file condition is detected,	118	This (rarely used) callback is called before a new connection is
85	i.e. in the case of a socket, when the other side has closed the	119	attempted, but after the file handle has been created (you can access that
86	connection cleanly.	120	file handle via C<< $handle->{fh} >>). It could be used to prepare the
		121	file handle with parameters required for the actual connect (as opposed to
		122	settings that can be changed when the connection is already established).
87		123
88	For sockets, this just means that the other side has stopped sending data,	124	The return value of this callback should be the connect timeout value in
89	you can still try to write data, and, in fact, one can return from the eof	125	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
90	callback and continue writing data, as only the read part has been shut	126	default timeout is to be used).
91	down.
92		127
93	While not mandatory, it is I<highly> recommended to set an eof callback,	128	=item on_connect => $cb->($handle, $host, $port, $retry->())
94	otherwise you might end up with a closed socket while you are still
95	waiting for data.
96		129
97	If an EOF condition has been detected but no C<on_eof> callback has been	130	This callback is called when a connection has been successfully established.
98	set, then a fatal error will be raised with C<$!> set to <0>.
99		131
		132	The peer's numeric host and port (the socket peername) are passed as
		133	parameters, together with a retry callback. At the time it is called the
		134	read and write queues, EOF status, TLS status and similar properties of
		135	the handle will have been reset.
		136
		137	If, for some reason, the handle is not acceptable, calling C<$retry> will
		138	continue with the next connection target (in case of multi-homed hosts or
		139	SRV records there can be multiple connection endpoints). The C<$retry>
		140	callback can be invoked after the connect callback returns, i.e. one can
		141	start a handshake and then decide to retry with the next host if the
		142	handshake fails.
		143
		144	In most cases, you should ignore the C<$retry> parameter.
		145
		146	=item on_connect_error => $cb->($handle, $message)
		147
		148	This callback is called when the connection could not be
		149	established. C<$!> will contain the relevant error code, and C<$message> a
		150	message describing it (usually the same as C<"$!">).
		151
		152	If this callback isn't specified, then C<on_error> will be called with a
		153	fatal error instead.
		154
		155	=back
		156
100	=item on_error => $cb->($handle, $fatal)	157	=item on_error => $cb->($handle, $fatal, $message)
101		158
102	This is the error callback, which is called when, well, some error	159	This is the error callback, which is called when, well, some error
103	occured, such as not being able to resolve the hostname, failure to	160	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.	161	connect, or a read error.
105		162
106	Some errors are fatal (which is indicated by C<$fatal> being true). On	163	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable	164	fatal errors the handle object will be destroyed (by a call to C<< ->
108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal	165	destroy >>) after invoking the error callback (which means you are free to
109	errors are an EOF condition with active (but unsatisifable) read watchers	166	examine the handle object). Examples of fatal errors are an EOF condition
110	(C<EPIPE>) or I/O errors.	167	with active (but unsatisfiable) read watchers (C<EPIPE>) or I/O errors. In
		168	cases where the other side can close the connection at will, it is
		169	often easiest to not report C<EPIPE> errors in this callback.
111		170
		171	AnyEvent::Handle tries to find an appropriate error code for you to check
		172	against, but in some cases (TLS errors), this does not work well.
		173
		174	If you report the error to the user, it is recommended to always output
		175	the C<$message> argument in human-readable error messages (you don't need
		176	to report C<"$!"> if you report C<$message>).
		177
		178	If you want to react programmatically to the error, then looking at C<$!>
		179	and comparing it against some of the documented C<Errno> values is usually
		180	better than looking at the C<$message>.
		181
112	Non-fatal errors can be retried by simply returning, but it is recommended	182	Non-fatal errors can be retried by returning, but it is recommended
113	to simply ignore this parameter and instead abondon the handle object	183	to simply ignore this parameter and instead abondon the handle object
114	when this callback is invoked. Examples of non-fatal errors are timeouts	184	when this callback is invoked. Examples of non-fatal errors are timeouts
115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).	185	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
116		186
117	On callback entrance, the value of C<$!> contains the operating system	187	On entry to the callback, the value of C<$!> contains the operating
118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	188	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		189	C<EPROTO>).
119		190
120	While not mandatory, it is I<highly> recommended to set this callback, as	191	While not mandatory, it is I<highly> recommended to set this callback, as
121	you will not be notified of errors otherwise. The default simply calls	192	you will not be notified of errors otherwise. The default just calls
122	C<croak>.	193	C<croak>.
123		194
124	=item on_read => $cb->($handle)	195	=item on_read => $cb->($handle)
125		196
126	This sets the default read callback, which is called when data arrives	197	This sets the default read callback, which is called when data arrives
127	and no read request is in the queue (unlike read queue callbacks, this	198	and no read request is in the queue (unlike read queue callbacks, this
128	callback will only be called when at least one octet of data is in the	199	callback will only be called when at least one octet of data is in the
129	read buffer).	200	read buffer).
130		201
131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	202	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
132	method or access the C<$handle->{rbuf}> member directly.	203	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		204	must not enlarge or modify the read buffer, you can only remove data at
		205	the beginning from it.
133		206
		207	You can also call C<< ->push_read (...) >> or any other function that
		208	modifies the read queue. Or do both. Or ...
		209
134	When an EOF condition is detected then AnyEvent::Handle will first try to	210	When an EOF condition is detected, AnyEvent::Handle will first try to
135	feed all the remaining data to the queued callbacks and C<on_read> before	211	feed all the remaining data to the queued callbacks and C<on_read> before
136	calling the C<on_eof> callback. If no progress can be made, then a fatal	212	calling the C<on_eof> callback. If no progress can be made, then a fatal
137	error will be raised (with C<$!> set to C<EPIPE>).	213	error will be raised (with C<$!> set to C<EPIPE>).
138		214
		215	Note that, unlike requests in the read queue, an C<on_read> callback
		216	doesn't mean you I<require> some data: if there is an EOF and there
		217	are outstanding read requests then an error will be flagged. With an
		218	C<on_read> callback, the C<on_eof> callback will be invoked.
		219
		220	=item on_eof => $cb->($handle)
		221
		222	Set the callback to be called when an end-of-file condition is detected,
		223	i.e. in the case of a socket, when the other side has closed the
		224	connection cleanly, and there are no outstanding read requests in the
		225	queue (if there are read requests, then an EOF counts as an unexpected
		226	connection close and will be flagged as an error).
		227
		228	For sockets, this just means that the other side has stopped sending data,
		229	you can still try to write data, and, in fact, one can return from the EOF
		230	callback and continue writing data, as only the read part has been shut
		231	down.
		232
		233	If an EOF condition has been detected but no C<on_eof> callback has been
		234	set, then a fatal error will be raised with C<$!> set to <0>.
		235
139	=item on_drain => $cb->($handle)	236	=item on_drain => $cb->($handle)
140		237
141	This sets the callback that is called when the write buffer becomes empty	238	This sets the callback that is called once when the write buffer becomes
142	(or when the callback is set and the buffer is empty already).	239	empty (and immediately when the handle object is created).
143		240
144	To append to the write buffer, use the C<< ->push_write >> method.	241	To append to the write buffer, use the C<< ->push_write >> method.
145		242
146	This callback is useful when you don't want to put all of your write data	243	This callback is useful when you don't want to put all of your write data
147	into the queue at once, for example, when you want to write the contents	244	into the queue at once, for example, when you want to write the contents
…		…
149	memory and push it into the queue, but instead only read more data from	246	memory and push it into the queue, but instead only read more data from
150	the file when the write queue becomes empty.	247	the file when the write queue becomes empty.
151		248
152	=item timeout => $fractional_seconds	249	=item timeout => $fractional_seconds
153		250
		251	=item rtimeout => $fractional_seconds
		252
		253	=item wtimeout => $fractional_seconds
		254
154	If non-zero, then this enables an "inactivity" timeout: whenever this many	255	If non-zero, then these enables an "inactivity" timeout: whenever this
155	seconds pass without a successful read or write on the underlying file	256	many seconds pass without a successful read or write on the underlying
156	handle, the C<on_timeout> callback will be invoked (and if that one is	257	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
157	missing, a non-fatal C<ETIMEDOUT> error will be raised).	258	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		259	error will be raised).
158		260
		261	There are three variants of the timeouts that work independently of each
		262	other, for both read and write (triggered when nothing was read I<OR>
		263	written), just read (triggered when nothing was read), and just write:
		264	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		265	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		266	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		267
159	Note that timeout processing is also active when you currently do not have	268	Note that timeout processing is active even when you do not have any
160	any outstanding read or write requests: If you plan to keep the connection	269	outstanding read or write requests: If you plan to keep the connection
161	idle then you should disable the timout temporarily or ignore the timeout	270	idle then you should disable the timeout temporarily or ignore the
162	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	271	timeout in the corresponding C<on_timeout> callback, in which case
163	restart the timeout.	272	AnyEvent::Handle will simply restart the timeout.
164		273
165	Zero (the default) disables this timeout.	274	Zero (the default) disables the corresponding timeout.
166		275
167	=item on_timeout => $cb->($handle)	276	=item on_timeout => $cb->($handle)
		277
		278	=item on_rtimeout => $cb->($handle)
		279
		280	=item on_wtimeout => $cb->($handle)
168		281
169	Called whenever the inactivity timeout passes. If you return from this	282	Called whenever the inactivity timeout passes. If you return from this
170	callback, then the timeout will be reset as if some activity had happened,	283	callback, then the timeout will be reset as if some activity had happened,
171	so this condition is not fatal in any way.	284	so this condition is not fatal in any way.
172		285
…		…
180	be configured to accept only so-and-so much data that it cannot act on	293	be configured to accept only so-and-so much data that it cannot act on
181	(for example, when expecting a line, an attacker could send an unlimited	294	(for example, when expecting a line, an attacker could send an unlimited
182	amount of data without a callback ever being called as long as the line	295	amount of data without a callback ever being called as long as the line
183	isn't finished).	296	isn't finished).
184		297
		298	=item wbuf_max => <bytes>
		299
		300	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
		301	when the write buffer ever (strictly) exceeds this size. This is useful to
		302	avoid some forms of denial-of-service attacks.
		303
		304	Although the units of this parameter is bytes, this is the I<raw> number
		305	of bytes not yet accepted by the kernel. This can make a difference when
		306	you e.g. use TLS, as TLS typically makes your write data larger (but it
		307	can also make it smaller due to compression).
		308
		309	As an example of when this limit is useful, take a chat server that sends
		310	chat messages to a client. If the client does not read those in a timely
		311	manner then the send buffer in the server would grow unbounded.
		312
185	=item autocork => <boolean>	313	=item autocork => <boolean>
186		314
187	When disabled (the default), then C<push_write> will try to immediately	315	When disabled (the default), C<push_write> will try to immediately
188	write the data to the handle, if possible. This avoids having to register	316	write the data to the handle if possible. This avoids having to register
189	a write watcher and wait for the next event loop iteration, but can	317	a write watcher and wait for the next event loop iteration, but can
190	be inefficient if you write multiple small chunks (on the wire, this	318	be inefficient if you write multiple small chunks (on the wire, this
191	disadvantage is usually avoided by your kernel's nagle algorithm, see	319	disadvantage is usually avoided by your kernel's nagle algorithm, see
192	C<no_delay>, but this option can save costly syscalls).	320	C<no_delay>, but this option can save costly syscalls).
193		321
194	When enabled, then writes will always be queued till the next event loop	322	When enabled, writes will always be queued till the next event loop
195	iteration. This is efficient when you do many small writes per iteration,	323	iteration. This is efficient when you do many small writes per iteration,
196	but less efficient when you do a single write only per iteration (or when	324	but less efficient when you do a single write only per iteration (or when
197	the write buffer often is full). It also increases write latency.	325	the write buffer often is full). It also increases write latency.
198		326
199	=item no_delay => <boolean>	327	=item no_delay => <boolean>
…		…
203	the Nagle algorithm, and usually it is beneficial.	331	the Nagle algorithm, and usually it is beneficial.
204		332
205	In some situations you want as low a delay as possible, which can be	333	In some situations you want as low a delay as possible, which can be
206	accomplishd by setting this option to a true value.	334	accomplishd by setting this option to a true value.
207		335
208	The default is your opertaing system's default behaviour (most likely	336	The default is your operating system's default behaviour (most likely
209	enabled), this option explicitly enables or disables it, if possible.	337	enabled). This option explicitly enables or disables it, if possible.
		338
		339	=item keepalive => <boolean>
		340
		341	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		342	normally, TCP connections have no time-out once established, so TCP
		343	connections, once established, can stay alive forever even when the other
		344	side has long gone. TCP keepalives are a cheap way to take down long-lived
		345	TCP connections when the other side becomes unreachable. While the default
		346	is OS-dependent, TCP keepalives usually kick in after around two hours,
		347	and, if the other side doesn't reply, take down the TCP connection some 10
		348	to 15 minutes later.
		349
		350	It is harmless to specify this option for file handles that do not support
		351	keepalives, and enabling it on connections that are potentially long-lived
		352	is usually a good idea.
		353
		354	=item oobinline => <boolean>
		355
		356	BSD majorly fucked up the implementation of TCP urgent data. The result
		357	is that almost no OS implements TCP according to the specs, and every OS
		358	implements it slightly differently.
		359
		360	If you want to handle TCP urgent data, then setting this flag (the default
		361	is enabled) gives you the most portable way of getting urgent data, by
		362	putting it into the stream.
		363
		364	Since BSD emulation of OOB data on top of TCP's urgent data can have
		365	security implications, AnyEvent::Handle sets this flag automatically
		366	unless explicitly specified. Note that setting this flag after
		367	establishing a connection I<may> be a bit too late (data loss could
		368	already have occured on BSD systems), but at least it will protect you
		369	from most attacks.
210		370
211	=item read_size => <bytes>	371	=item read_size => <bytes>
212		372
213	The default read block size (the amount of bytes this module will	373	The initial read block size, the number of bytes this module will try
214	try to read during each loop iteration, which affects memory	374	to read during each loop iteration. Each handle object will consume
215	requirements). Default: C<8192>.	375	at least this amount of memory for the read buffer as well, so when
		376	handling many connections watch out for memory requirements). See also
		377	C<max_read_size>. Default: C<2048>.
		378
		379	=item max_read_size => <bytes>
		380
		381	The maximum read buffer size used by the dynamic adjustment
		382	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		383	one go it will double C<read_size> up to the maximum given by this
		384	option. Default: C<131072> or C<read_size>, whichever is higher.
216		385
217	=item low_water_mark => <bytes>	386	=item low_water_mark => <bytes>
218		387
219	Sets the amount of bytes (default: C<0>) that make up an "empty" write	388	Sets the number of bytes (default: C<0>) that make up an "empty" write
220	buffer: If the write reaches this size or gets even samller it is	389	buffer: If the buffer reaches this size or gets even samller it is
221	considered empty.	390	considered empty.
222		391
223	Sometimes it can be beneficial (for performance reasons) to add data to	392	Sometimes it can be beneficial (for performance reasons) to add data to
224	the write buffer before it is fully drained, but this is a rare case, as	393	the write buffer before it is fully drained, but this is a rare case, as
225	the operating system kernel usually buffers data as well, so the default	394	the operating system kernel usually buffers data as well, so the default
226	is good in almost all cases.	395	is good in almost all cases.
227		396
228	=item linger => <seconds>	397	=item linger => <seconds>
229		398
230	If non-zero (default: C<3600>), then the destructor of the	399	If this is non-zero (default: C<3600>), the destructor of the
231	AnyEvent::Handle object will check whether there is still outstanding	400	AnyEvent::Handle object will check whether there is still outstanding
232	write data and will install a watcher that will write this data to the	401	write data and will install a watcher that will write this data to the
233	socket. No errors will be reported (this mostly matches how the operating	402	socket. No errors will be reported (this mostly matches how the operating
234	system treats outstanding data at socket close time).	403	system treats outstanding data at socket close time).
235		404
236	This will not work for partial TLS data that could not be encoded	405	This will not work for partial TLS data that could not be encoded
237	yet. This data will be lost. Calling the C<stoptls> method in time might	406	yet. This data will be lost. Calling the C<stoptls> method in time might
238	help.	407	help.
239		408
		409	=item peername => $string
		410
		411	A string used to identify the remote site - usually the DNS hostname
		412	(I<not> IDN!) used to create the connection, rarely the IP address.
		413
		414	Apart from being useful in error messages, this string is also used in TLS
		415	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		416	verification will be skipped when C<peername> is not specified or is
		417	C<undef>.
		418
240	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	419	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
241		420
242	When this parameter is given, it enables TLS (SSL) mode, that means	421	When this parameter is given, it enables TLS (SSL) mode, that means
243	AnyEvent will start a TLS handshake as soon as the conenction has been	422	AnyEvent will start a TLS handshake as soon as the connection has been
244	established and will transparently encrypt/decrypt data afterwards.	423	established and will transparently encrypt/decrypt data afterwards.
		424
		425	All TLS protocol errors will be signalled as C<EPROTO>, with an
		426	appropriate error message.
245		427
246	TLS mode requires Net::SSLeay to be installed (it will be loaded	428	TLS mode requires Net::SSLeay to be installed (it will be loaded
247	automatically when you try to create a TLS handle): this module doesn't	429	automatically when you try to create a TLS handle): this module doesn't
248	have a dependency on that module, so if your module requires it, you have	430	have a dependency on that module, so if your module requires it, you have
249	to add the dependency yourself.	431	to add the dependency yourself. If Net::SSLeay cannot be loaded or is too
		432	old, you get an C<EPROTO> error.
250		433
251	Unlike TCP, TLS has a server and client side: for the TLS server side, use	434	Unlike TCP, TLS has a server and client side: for the TLS server side, use
252	C<accept>, and for the TLS client side of a connection, use C<connect>	435	C<accept>, and for the TLS client side of a connection, use C<connect>
253	mode.	436	mode.
254		437
255	You can also provide your own TLS connection object, but you have	438	You can also provide your own TLS connection object, but you have
256	to make sure that you call either C<Net::SSLeay::set_connect_state>	439	to make sure that you call either C<Net::SSLeay::set_connect_state>
257	or C<Net::SSLeay::set_accept_state> on it before you pass it to	440	or C<Net::SSLeay::set_accept_state> on it before you pass it to
258	AnyEvent::Handle.	441	AnyEvent::Handle. Also, this module will take ownership of this connection
		442	object.
259		443
		444	At some future point, AnyEvent::Handle might switch to another TLS
		445	implementation, then the option to use your own session object will go
		446	away.
		447
		448	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		449	passing in the wrong integer will lead to certain crash. This most often
		450	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		451	segmentation fault.
		452
260	See the C<< ->starttls >> method for when need to start TLS negotiation later.	453	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
261		454
262	=item tls_ctx => $ssl_ctx	455	=item tls_ctx => $anyevent_tls
263		456
264	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection	457	Use the given C<AnyEvent::TLS> object to create the new TLS connection
265	(unless a connection object was specified directly). If this parameter is	458	(unless a connection object was specified directly). If this
266	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	459	parameter is missing (or C<undef>), then AnyEvent::Handle will use
		460	C<AnyEvent::Handle::TLS_CTX>.
267		461
		462	Instead of an object, you can also specify a hash reference with C<< key
		463	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		464	new TLS context object.
		465
		466	=item on_starttls => $cb->($handle, $success[, $error_message])
		467
		468	This callback will be invoked when the TLS/SSL handshake has finished. If
		469	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		470	(C<on_stoptls> will not be called in this case).
		471
		472	The session in C<< $handle->{tls} >> can still be examined in this
		473	callback, even when the handshake was not successful.
		474
		475	TLS handshake failures will not cause C<on_error> to be invoked when this
		476	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		477
		478	Without this callback, handshake failures lead to C<on_error> being
		479	called as usual.
		480
		481	Note that you cannot just call C<starttls> again in this callback. If you
		482	need to do that, start an zero-second timer instead whose callback can
		483	then call C<< ->starttls >> again.
		484
		485	=item on_stoptls => $cb->($handle)
		486
		487	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		488	set, then it will be invoked after freeing the TLS session. If it is not,
		489	then a TLS shutdown condition will be treated like a normal EOF condition
		490	on the handle.
		491
		492	The session in C<< $handle->{tls} >> can still be examined in this
		493	callback.
		494
		495	This callback will only be called on TLS shutdowns, not when the
		496	underlying handle signals EOF.
		497
268	=item json => JSON or JSON::XS object	498	=item json => L<JSON>, L<JSON::PP> or L<JSON::XS> object
269		499
270	This is the json coder object used by the C<json> read and write types.	500	This is the json coder object used by the C<json> read and write types.
271		501
272	If you don't supply it, then AnyEvent::Handle will create and use a	502	If you don't supply it, then AnyEvent::Handle will create and use a
273	suitable one (on demand), which will write and expect UTF-8 encoded JSON	503	suitable one (on demand), which will write and expect UTF-8 encoded
		504	JSON texts (either using L<JSON::XS> or L<JSON>). The written texts are
		505	guaranteed not to contain any newline character.
		506
		507	For security reasons, this encoder will likely I<not> handle numbers and
		508	strings, only arrays and objects/hashes. The reason is that originally
		509	JSON was self-delimited, but Dougles Crockford thought it was a splendid
		510	idea to redefine JSON incompatibly, so this is no longer true.
		511
		512	For protocols that used back-to-back JSON texts, this might lead to
		513	run-ins, where two or more JSON texts will be interpreted as one JSON
274	texts.	514	text.
275		515
		516	For this reason, if the default encoder uses L<JSON::XS>, it will default
		517	to not allowing anything but arrays and objects/hashes, at least for the
		518	forseeable future (it will change at some point). This might or might not
		519	be true for the L<JSON> module, so this might cause a security issue.
		520
		521	If you depend on either behaviour, you should create your own json object
		522	and pass it in explicitly.
		523
		524	=item cbor => L<CBOR::XS> object
		525
		526	This is the cbor coder object used by the C<cbor> read and write types.
		527
		528	If you don't supply it, then AnyEvent::Handle will create and use a
		529	suitable one (on demand), which will write CBOR without using extensions,
		530	if possible.
		531
276	Note that you are responsible to depend on the JSON module if you want to	532	Note that you are responsible to depend on the L<CBOR::XS> module if you
277	use this functionality, as AnyEvent does not have a dependency itself.	533	want to use this functionality, as AnyEvent does not have a dependency on
		534	it itself.
278		535
279	=back	536	=back
280		537
281	=cut	538	=cut
282		539
283	sub new {	540	sub new {
284	my $class = shift;	541	my $class = shift;
285
286	my $self = bless { @_ }, $class;	542	my $self = bless { @_ }, $class;
287		543
288	$self->{fh} or Carp::croak "mandatory argument fh is missing";	544	if ($self->{fh}) {
		545	$self->_start;
		546	return unless $self->{fh}; # could be gone by now
		547
		548	} elsif ($self->{connect}) {
		549	require AnyEvent::Socket;
		550
		551	$self->{peername} = $self->{connect}[0]
		552	unless exists $self->{peername};
		553
		554	$self->{_skip_drain_rbuf} = 1;
		555
		556	{
		557	Scalar::Util::weaken (my $self = $self);
		558
		559	$self->{_connect} =
		560	AnyEvent::Socket::tcp_connect (
		561	$self->{connect}[0],
		562	$self->{connect}[1],
		563	sub {
		564	my ($fh, $host, $port, $retry) = @_;
		565
		566	delete $self->{_connect}; # no longer needed
		567
		568	if ($fh) {
		569	$self->{fh} = $fh;
		570
		571	delete $self->{_skip_drain_rbuf};
		572	$self->_start;
		573
		574	$self->{on_connect}
		575	and $self->{on_connect}($self, $host, $port, sub {
		576	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		577	$self->{_skip_drain_rbuf} = 1;
		578	&$retry;
		579	});
		580
		581	} else {
		582	if ($self->{on_connect_error}) {
		583	$self->{on_connect_error}($self, "$!");
		584	$self->destroy if $self;
		585	} else {
		586	$self->_error ($!, 1);
		587	}
		588	}
		589	},
		590	sub {
		591	local $self->{fh} = $_[0];
		592
		593	$self->{on_prepare}
		594	? $self->{on_prepare}->($self)
		595	: ()
		596	}
		597	);
		598	}
		599
		600	} else {
		601	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		602	}
		603
		604	$self
		605	}
		606
		607	sub _start {
		608	my ($self) = @_;
		609
		610	# too many clueless people try to use udp and similar sockets
		611	# with AnyEvent::Handle, do them a favour.
		612	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		613	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		614	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
289		615
290	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	616	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
291		617
		618	$self->{_activity} =
		619	$self->{_ractivity} =
		620	$self->{_wactivity} = AE::now;
		621
		622	$self->{read_size} ||= 2048;
		623	$self->{max_read_size} = $self->{read_size}
		624	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		625
		626	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		627	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		628	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		629
		630	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		631	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		632
		633	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		634
292	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})	635	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
293	if $self->{tls};	636	if $self->{tls};
294		637
295	$self->{_activity} = AnyEvent->now;
296	$self->_timeout;
297
298	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	638	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
299	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
300		639
301	$self->start_read	640	$self->start_read
302	if $self->{on_read};	641	if $self->{on_read} || @{ $self->{_queue} };
303		642
304	$self	643	$self->_drain_wbuf;
305	}
306
307	sub _shutdown {
308	my ($self) = @_;
309
310	delete $self->{_tw};
311	delete $self->{_rw};
312	delete $self->{_ww};
313	delete $self->{fh};
314
315	&_freetls;
316
317	delete $self->{on_read};
318	delete $self->{_queue};
319	}	644	}
320		645
321	sub _error {	646	sub _error {
322	my ($self, $errno, $fatal) = @_;	647	my ($self, $errno, $fatal, $message) = @_;
323
324	$self->_shutdown
325	if $fatal;
326		648
327	$! = $errno;	649	$! = $errno;
		650	$message ||= "$!";
328		651
329	if ($self->{on_error}) {	652	if ($self->{on_error}) {
330	$self->{on_error}($self, $fatal);	653	$self->{on_error}($self, $fatal, $message);
331	} else {	654	$self->destroy if $fatal;
		655	} elsif ($self->{fh} || $self->{connect}) {
		656	$self->destroy;
332	Carp::croak "AnyEvent::Handle uncaught error: $!";	657	Carp::croak "AnyEvent::Handle uncaught error: $message";
333	}	658	}
334	}	659	}
335		660
336	=item $fh = $handle->fh	661	=item $fh = $handle->fh
337		662
…		…
361	$_[0]{on_eof} = $_[1];	686	$_[0]{on_eof} = $_[1];
362	}	687	}
363		688
364	=item $handle->on_timeout ($cb)	689	=item $handle->on_timeout ($cb)
365		690
366	Replace the current C<on_timeout> callback, or disables the callback (but	691	=item $handle->on_rtimeout ($cb)
367	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
368	argument and method.
369		692
370	=cut	693	=item $handle->on_wtimeout ($cb)
371		694
372	sub on_timeout {	695	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
373	$_[0]{on_timeout} = $_[1];	696	callback, or disables the callback (but not the timeout) if C<$cb> =
374	}	697	C<undef>. See the C<timeout> constructor argument and method.
		698
		699	=cut
		700
		701	# see below
375		702
376	=item $handle->autocork ($boolean)	703	=item $handle->autocork ($boolean)
377		704
378	Enables or disables the current autocork behaviour (see C<autocork>	705	Enables or disables the current autocork behaviour (see C<autocork>
379	constructor argument).	706	constructor argument). Changes will only take effect on the next write.
380		707
381	=cut	708	=cut
		709
		710	sub autocork {
		711	$_[0]{autocork} = $_[1];
		712	}
382		713
383	=item $handle->no_delay ($boolean)	714	=item $handle->no_delay ($boolean)
384		715
385	Enables or disables the C<no_delay> setting (see constructor argument of	716	Enables or disables the C<no_delay> setting (see constructor argument of
386	the same name for details).	717	the same name for details).
…		…
388	=cut	719	=cut
389		720
390	sub no_delay {	721	sub no_delay {
391	$_[0]{no_delay} = $_[1];	722	$_[0]{no_delay} = $_[1];
392		723
		724	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		725	if $_[0]{fh};
		726	}
		727
		728	=item $handle->keepalive ($boolean)
		729
		730	Enables or disables the C<keepalive> setting (see constructor argument of
		731	the same name for details).
		732
		733	=cut
		734
		735	sub keepalive {
		736	$_[0]{keepalive} = $_[1];
		737
393	eval {	738	eval {
394	local $SIG{__DIE__};	739	local $SIG{__DIE__};
395	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	740	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		741	if $_[0]{fh};
396	};	742	};
397	}	743	}
398		744
		745	=item $handle->oobinline ($boolean)
		746
		747	Enables or disables the C<oobinline> setting (see constructor argument of
		748	the same name for details).
		749
		750	=cut
		751
		752	sub oobinline {
		753	$_[0]{oobinline} = $_[1];
		754
		755	eval {
		756	local $SIG{__DIE__};
		757	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		758	if $_[0]{fh};
		759	};
		760	}
		761
		762	=item $handle->keepalive ($boolean)
		763
		764	Enables or disables the C<keepalive> setting (see constructor argument of
		765	the same name for details).
		766
		767	=cut
		768
		769	sub keepalive {
		770	$_[0]{keepalive} = $_[1];
		771
		772	eval {
		773	local $SIG{__DIE__};
		774	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		775	if $_[0]{fh};
		776	};
		777	}
		778
		779	=item $handle->on_starttls ($cb)
		780
		781	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		782
		783	=cut
		784
		785	sub on_starttls {
		786	$_[0]{on_starttls} = $_[1];
		787	}
		788
		789	=item $handle->on_stoptls ($cb)
		790
		791	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		792
		793	=cut
		794
		795	sub on_stoptls {
		796	$_[0]{on_stoptls} = $_[1];
		797	}
		798
		799	=item $handle->rbuf_max ($max_octets)
		800
		801	Configures the C<rbuf_max> setting (C<undef> disables it).
		802
		803	=item $handle->wbuf_max ($max_octets)
		804
		805	Configures the C<wbuf_max> setting (C<undef> disables it).
		806
		807	=cut
		808
		809	sub rbuf_max {
		810	$_[0]{rbuf_max} = $_[1];
		811	}
		812
		813	sub wbuf_max {
		814	$_[0]{wbuf_max} = $_[1];
		815	}
		816
399	#############################################################################	817	#############################################################################
400		818
401	=item $handle->timeout ($seconds)	819	=item $handle->timeout ($seconds)
402		820
		821	=item $handle->rtimeout ($seconds)
		822
		823	=item $handle->wtimeout ($seconds)
		824
403	Configures (or disables) the inactivity timeout.	825	Configures (or disables) the inactivity timeout.
404		826
405	=cut	827	The timeout will be checked instantly, so this method might destroy the
		828	handle before it returns.
406		829
407	sub timeout {	830	=item $handle->timeout_reset
		831
		832	=item $handle->rtimeout_reset
		833
		834	=item $handle->wtimeout_reset
		835
		836	Reset the activity timeout, as if data was received or sent.
		837
		838	These methods are cheap to call.
		839
		840	=cut
		841
		842	for my $dir ("", "r", "w") {
		843	my $timeout = "${dir}timeout";
		844	my $tw = "_${dir}tw";
		845	my $on_timeout = "on_${dir}timeout";
		846	my $activity = "_${dir}activity";
		847	my $cb;
		848
		849	*$on_timeout = sub {
		850	$_[0]{$on_timeout} = $_[1];
		851	};
		852
		853	*$timeout = sub {
408	my ($self, $timeout) = @_;	854	my ($self, $new_value) = @_;
409		855
		856	$new_value >= 0
		857	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		858
410	$self->{timeout} = $timeout;	859	$self->{$timeout} = $new_value;
411	$self->_timeout;	860	delete $self->{$tw}; &$cb;
412	}	861	};
413		862
		863	*{"${dir}timeout_reset"} = sub {
		864	$_[0]{$activity} = AE::now;
		865	};
		866
		867	# main workhorse:
414	# reset the timeout watcher, as neccessary	868	# reset the timeout watcher, as neccessary
415	# also check for time-outs	869	# also check for time-outs
416	sub _timeout {	870	$cb = sub {
417	my ($self) = @_;	871	my ($self) = @_;
418		872
419	if ($self->{timeout}) {	873	if ($self->{$timeout} && $self->{fh}) {
420	my $NOW = AnyEvent->now;	874	my $NOW = AE::now;
421		875
422	# when would the timeout trigger?	876	# when would the timeout trigger?
423	my $after = $self->{_activity} + $self->{timeout} - $NOW;	877	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
424		878
425	# now or in the past already?	879	# now or in the past already?
426	if ($after <= 0) {	880	if ($after <= 0) {
427	$self->{_activity} = $NOW;	881	$self->{$activity} = $NOW;
428		882
429	if ($self->{on_timeout}) {	883	if ($self->{$on_timeout}) {
430	$self->{on_timeout}($self);	884	$self->{$on_timeout}($self);
431	} else {	885	} else {
432	$self->_error (&Errno::ETIMEDOUT);	886	$self->_error (Errno::ETIMEDOUT);
		887	}
		888
		889	# callback could have changed timeout value, optimise
		890	return unless $self->{$timeout};
		891
		892	# calculate new after
		893	$after = $self->{$timeout};
433	}	894	}
434		895
435	# callback could have changed timeout value, optimise	896	Scalar::Util::weaken $self;
436	return unless $self->{timeout};	897	return unless $self; # ->error could have destroyed $self
437		898
438	# calculate new after	899	$self->{$tw} ||= AE::timer $after, 0, sub {
439	$after = $self->{timeout};	900	delete $self->{$tw};
		901	$cb->($self);
		902	};
		903	} else {
		904	delete $self->{$tw};
440	}	905	}
441
442	Scalar::Util::weaken $self;
443	return unless $self; # ->error could have destroyed $self
444
445	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
446	delete $self->{_tw};
447	$self->_timeout;
448	});
449	} else {
450	delete $self->{_tw};
451	}	906	}
452	}	907	}
453		908
454	#############################################################################	909	#############################################################################
455		910
…		…
462		917
463	The write queue is very simple: you can add data to its end, and	918	The write queue is very simple: you can add data to its end, and
464	AnyEvent::Handle will automatically try to get rid of it for you.	919	AnyEvent::Handle will automatically try to get rid of it for you.
465		920
466	When data could be written and the write buffer is shorter then the low	921	When data could be written and the write buffer is shorter then the low
467	water mark, the C<on_drain> callback will be invoked.	922	water mark, the C<on_drain> callback will be invoked once.
468		923
469	=over 4	924	=over 4
470		925
471	=item $handle->on_drain ($cb)	926	=item $handle->on_drain ($cb)
472		927
473	Sets the C<on_drain> callback or clears it (see the description of	928	Sets the C<on_drain> callback or clears it (see the description of
474	C<on_drain> in the constructor).	929	C<on_drain> in the constructor).
475		930
		931	This method may invoke callbacks (and therefore the handle might be
		932	destroyed after it returns).
		933
476	=cut	934	=cut
477		935
478	sub on_drain {	936	sub on_drain {
479	my ($self, $cb) = @_;	937	my ($self, $cb) = @_;
480		938
…		…
484	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});	942	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
485	}	943	}
486		944
487	=item $handle->push_write ($data)	945	=item $handle->push_write ($data)
488		946
489	Queues the given scalar to be written. You can push as much data as you	947	Queues the given scalar to be written. You can push as much data as
490	want (only limited by the available memory), as C<AnyEvent::Handle>	948	you want (only limited by the available memory and C<wbuf_max>), as
491	buffers it independently of the kernel.	949	C<AnyEvent::Handle> buffers it independently of the kernel.
		950
		951	This method may invoke callbacks (and therefore the handle might be
		952	destroyed after it returns).
492		953
493	=cut	954	=cut
494		955
495	sub _drain_wbuf {	956	sub _drain_wbuf {
496	my ($self) = @_;	957	my ($self) = @_;
…		…
500	Scalar::Util::weaken $self;	961	Scalar::Util::weaken $self;
501		962
502	my $cb = sub {	963	my $cb = sub {
503	my $len = syswrite $self->{fh}, $self->{wbuf};	964	my $len = syswrite $self->{fh}, $self->{wbuf};
504		965
505	if ($len >= 0) {	966	if (defined $len) {
506	substr $self->{wbuf}, 0, $len, "";	967	substr $self->{wbuf}, 0, $len, "";
507		968
508	$self->{_activity} = AnyEvent->now;	969	$self->{_activity} = $self->{_wactivity} = AE::now;
509		970
510	$self->{on_drain}($self)	971	$self->{on_drain}($self)
511	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})	972	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
512	&& $self->{on_drain};	973	&& $self->{on_drain};
513		974
514	delete $self->{_ww} unless length $self->{wbuf};	975	delete $self->{_ww} unless length $self->{wbuf};
515	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	976	} elsif ($! != EAGAIN && $! != EINTR && $! != EWOULDBLOCK && $! != WSAEWOULDBLOCK) {
516	$self->_error ($!, 1);	977	$self->_error ($!, 1);
517	}	978	}
518	};	979	};
519		980
520	# try to write data immediately	981	# try to write data immediately
521	$cb->() unless $self->{autocork};	982	$cb->() unless $self->{autocork};
522		983
523	# if still data left in wbuf, we need to poll	984	# if still data left in wbuf, we need to poll
524	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	985	$self->{_ww} = AE::io $self->{fh}, 1, $cb
525	if length $self->{wbuf};	986	if length $self->{wbuf};
		987
		988	if (
		989	defined $self->{wbuf_max}
		990	&& $self->{wbuf_max} < length $self->{wbuf}
		991	) {
		992	$self->_error (Errno::ENOSPC, 1), return;
		993	}
526	};	994	};
527	}	995	}
528		996
529	our %WH;	997	our %WH;
530		998
		999	# deprecated
531	sub register_write_type($$) {	1000	sub register_write_type($$) {
532	$WH{$_[0]} = $_[1];	1001	$WH{$_[0]} = $_[1];
533	}	1002	}
534		1003
535	sub push_write {	1004	sub push_write {
536	my $self = shift;	1005	my $self = shift;
537		1006
538	if (@_ > 1) {	1007	if (@_ > 1) {
539	my $type = shift;	1008	my $type = shift;
540		1009
		1010	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
541	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	1011	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
542	->($self, @_);	1012	->($self, @_);
543	}	1013	}
544		1014
		1015	# we downgrade here to avoid hard-to-track-down bugs,
		1016	# and diagnose the problem earlier and better.
		1017
545	if ($self->{tls}) {	1018	if ($self->{tls}) {
546	$self->{_tls_wbuf} .= $_[0];	1019	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
547		1020	&_dotls ($self) if $self->{fh};
548	&_dotls ($self);
549	} else {	1021	} else {
550	$self->{wbuf} .= $_[0];	1022	utf8::downgrade $self->{wbuf} .= $_[0];
551	$self->_drain_wbuf;	1023	$self->_drain_wbuf if $self->{fh};
552	}	1024	}
553	}	1025	}
554		1026
555	=item $handle->push_write (type => @args)	1027	=item $handle->push_write (type => @args)
556		1028
557	Instead of formatting your data yourself, you can also let this module do	1029	Instead of formatting your data yourself, you can also let this module
558	the job by specifying a type and type-specific arguments.	1030	do the job by specifying a type and type-specific arguments. You
		1031	can also specify the (fully qualified) name of a package, in which
		1032	case AnyEvent tries to load the package and then expects to find the
		1033	C<anyevent_write_type> function inside (see "custom write types", below).
559		1034
560	Predefined types are (if you have ideas for additional types, feel free to	1035	Predefined types are (if you have ideas for additional types, feel free to
561	drop by and tell us):	1036	drop by and tell us):
562		1037
563	=over 4	1038	=over 4
…		…
594		1069
595	Encodes the given hash or array reference into a JSON object. Unless you	1070	Encodes the given hash or array reference into a JSON object. Unless you
596	provide your own JSON object, this means it will be encoded to JSON text	1071	provide your own JSON object, this means it will be encoded to JSON text
597	in UTF-8.	1072	in UTF-8.
598		1073
		1074	The default encoder might or might not handle every type of JSON value -
		1075	it might be limited to arrays and objects for security reasons. See the
		1076	C<json> constructor attribute for more details.
		1077
599	JSON objects (and arrays) are self-delimiting, so you can write JSON at	1078	JSON objects (and arrays) are self-delimiting, so if you only use arrays
600	one end of a handle and read them at the other end without using any	1079	and hashes, you can write JSON at one end of a handle and read them at the
601	additional framing.	1080	other end without using any additional framing.
602		1081
603	The generated JSON text is guaranteed not to contain any newlines: While	1082	The JSON text generated by the default encoder is guaranteed not to
604	this module doesn't need delimiters after or between JSON texts to be	1083	contain any newlines: While this module doesn't need delimiters after or
605	able to read them, many other languages depend on that.	1084	between JSON texts to be able to read them, many other languages depend on
		1085	them.
606		1086
607	A simple RPC protocol that interoperates easily with others is to send	1087	A simple RPC protocol that interoperates easily with other languages is
608	JSON arrays (or objects, although arrays are usually the better choice as	1088	to send JSON arrays (or objects, although arrays are usually the better
609	they mimic how function argument passing works) and a newline after each	1089	choice as they mimic how function argument passing works) and a newline
610	JSON text:	1090	after each JSON text:
611		1091
612	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever	1092	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
613	$handle->push_write ("\012");	1093	$handle->push_write ("\012");
614		1094
615	An AnyEvent::Handle receiver would simply use the C<json> read type and	1095	An AnyEvent::Handle receiver would simply use the C<json> read type and
…		…
618	$handle->push_read (json => sub { my $array = $_[1]; ... });	1098	$handle->push_read (json => sub { my $array = $_[1]; ... });
619		1099
620	Other languages could read single lines terminated by a newline and pass	1100	Other languages could read single lines terminated by a newline and pass
621	this line into their JSON decoder of choice.	1101	this line into their JSON decoder of choice.
622		1102
		1103	=item cbor => $perl_scalar
		1104
		1105	Encodes the given scalar into a CBOR value. Unless you provide your own
		1106	L<CBOR::XS> object, this means it will be encoded to a CBOR string not
		1107	using any extensions, if possible.
		1108
		1109	CBOR values are self-delimiting, so you can write CBOR at one end of
		1110	a handle and read them at the other end without using any additional
		1111	framing.
		1112
		1113	A simple nd very very fast RPC protocol that interoperates with
		1114	other languages is to send CBOR and receive CBOR values (arrays are
		1115	recommended):
		1116
		1117	$handle->push_write (cbor => ["method", "arg1", "arg2"]); # whatever
		1118
		1119	An AnyEvent::Handle receiver would simply use the C<cbor> read type:
		1120
		1121	$handle->push_read (cbor => sub { my $array = $_[1]; ... });
		1122
623	=cut	1123	=cut
		1124
		1125	sub json_coder() {
		1126	eval { require JSON::XS; JSON::XS->new->utf8 }
		1127	|| do { require JSON::PP; JSON::PP->new->utf8 }
		1128	}
624		1129
625	register_write_type json => sub {	1130	register_write_type json => sub {
626	my ($self, $ref) = @_;	1131	my ($self, $ref) = @_;
627		1132
628	require JSON;	1133	($self->{json} ||= json_coder)
		1134	->encode ($ref)
		1135	};
629		1136
630	$self->{json} ? $self->{json}->encode ($ref)	1137	sub cbor_coder() {
631	: JSON::encode_json ($ref)	1138	require CBOR::XS;
		1139	CBOR::XS->new
		1140	}
		1141
		1142	register_write_type cbor => sub {
		1143	my ($self, $scalar) = @_;
		1144
		1145	($self->{cbor} ||= cbor_coder)
		1146	->encode ($scalar)
632	};	1147	};
633		1148
634	=item storable => $reference	1149	=item storable => $reference
635		1150
636	Freezes the given reference using L<Storable> and writes it to the	1151	Freezes the given reference using L<Storable> and writes it to the
…		…
639	=cut	1154	=cut
640		1155
641	register_write_type storable => sub {	1156	register_write_type storable => sub {
642	my ($self, $ref) = @_;	1157	my ($self, $ref) = @_;
643		1158
644	require Storable;	1159	require Storable unless $Storable::VERSION;
645		1160
646	pack "w/a*", Storable::nfreeze ($ref)	1161	pack "w/a*", Storable::nfreeze ($ref)
647	};	1162	};
648		1163
649	=back	1164	=back
650		1165
651	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1166	=item $handle->push_shutdown
652		1167
653	This function (not method) lets you add your own types to C<push_write>.	1168	Sometimes you know you want to close the socket after writing your data
		1169	before it was actually written. One way to do that is to replace your
		1170	C<on_drain> handler by a callback that shuts down the socket (and set
		1171	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1172	replaces the C<on_drain> callback with:
		1173
		1174	sub { shutdown $_[0]{fh}, 1 }
		1175
		1176	This simply shuts down the write side and signals an EOF condition to the
		1177	the peer.
		1178
		1179	You can rely on the normal read queue and C<on_eof> handling
		1180	afterwards. This is the cleanest way to close a connection.
		1181
		1182	This method may invoke callbacks (and therefore the handle might be
		1183	destroyed after it returns).
		1184
		1185	=cut
		1186
		1187	sub push_shutdown {
		1188	my ($self) = @_;
		1189
		1190	delete $self->{low_water_mark};
		1191	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1192	}
		1193
		1194	=item custom write types - Package::anyevent_write_type $handle, @args
		1195
		1196	Instead of one of the predefined types, you can also specify the name of
		1197	a package. AnyEvent will try to load the package and then expects to find
		1198	a function named C<anyevent_write_type> inside. If it isn't found, it
		1199	progressively tries to load the parent package until it either finds the
		1200	function (good) or runs out of packages (bad).
		1201
654	Whenever the given C<type> is used, C<push_write> will invoke the code	1202	Whenever the given C<type> is used, C<push_write> will the function with
655	reference with the handle object and the remaining arguments.	1203	the handle object and the remaining arguments.
656		1204
657	The code reference is supposed to return a single octet string that will	1205	The function is supposed to return a single octet string that will be
658	be appended to the write buffer.	1206	appended to the write buffer, so you can mentally treat this function as a
		1207	"arguments to on-the-wire-format" converter.
659		1208
660	Note that this is a function, and all types registered this way will be	1209	Example: implement a custom write type C<join> that joins the remaining
661	global, so try to use unique names.	1210	arguments using the first one.
		1211
		1212	$handle->push_write (My::Type => " ", 1,2,3);
		1213
		1214	# uses the following package, which can be defined in the "My::Type" or in
		1215	# the "My" modules to be auto-loaded, or just about anywhere when the
		1216	# My::Type::anyevent_write_type is defined before invoking it.
		1217
		1218	package My::Type;
		1219
		1220	sub anyevent_write_type {
		1221	my ($handle, $delim, @args) = @_;
		1222
		1223	join $delim, @args
		1224	}
662		1225
663	=cut	1226	=cut
664		1227
665	#############################################################################	1228	#############################################################################
666		1229
…		…
675	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1238	ways, the "simple" way, using only C<on_read> and the "complex" way, using
676	a queue.	1239	a queue.
677		1240
678	In the simple case, you just install an C<on_read> callback and whenever	1241	In the simple case, you just install an C<on_read> callback and whenever
679	new data arrives, it will be called. You can then remove some data (if	1242	new data arrives, it will be called. You can then remove some data (if
680	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna	1243	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
681	leave the data there if you want to accumulate more (e.g. when only a	1244	leave the data there if you want to accumulate more (e.g. when only a
682	partial message has been received so far).	1245	partial message has been received so far), or change the read queue with
		1246	e.g. C<push_read>.
683		1247
684	In the more complex case, you want to queue multiple callbacks. In this	1248	In the more complex case, you want to queue multiple callbacks. In this
685	case, AnyEvent::Handle will call the first queued callback each time new	1249	case, AnyEvent::Handle will call the first queued callback each time new
686	data arrives (also the first time it is queued) and removes it when it has	1250	data arrives (also the first time it is queued) and remove it when it has
687	done its job (see C<push_read>, below).	1251	done its job (see C<push_read>, below).
688		1252
689	This way you can, for example, push three line-reads, followed by reading	1253	This way you can, for example, push three line-reads, followed by reading
690	a chunk of data, and AnyEvent::Handle will execute them in order.	1254	a chunk of data, and AnyEvent::Handle will execute them in order.
691		1255
…		…
748	=cut	1312	=cut
749		1313
750	sub _drain_rbuf {	1314	sub _drain_rbuf {
751	my ($self) = @_;	1315	my ($self) = @_;
752		1316
		1317	# avoid recursion
		1318	return if $self->{_skip_drain_rbuf};
753	local $self->{_in_drain} = 1;	1319	local $self->{_skip_drain_rbuf} = 1;
754
755	if (
756	defined $self->{rbuf_max}
757	&& $self->{rbuf_max} < length $self->{rbuf}
758	) {
759	$self->_error (&Errno::ENOSPC, 1), return;
760	}
761		1320
762	while () {	1321	while () {
		1322	# we need to use a separate tls read buffer, as we must not receive data while
		1323	# we are draining the buffer, and this can only happen with TLS.
		1324	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1325	if exists $self->{_tls_rbuf};
		1326
763	my $len = length $self->{rbuf};	1327	my $len = length $self->{rbuf};
764		1328
765	if (my $cb = shift @{ $self->{_queue} }) {	1329	if (my $cb = shift @{ $self->{_queue} }) {
766	unless ($cb->($self)) {	1330	unless ($cb->($self)) {
767	if ($self->{_eof}) {	1331	# no progress can be made
768	# no progress can be made (not enough data and no data forthcoming)	1332	# (not enough data and no data forthcoming)
769	$self->_error (&Errno::EPIPE, 1), return;	1333	$self->_error (Errno::EPIPE, 1), return
770	}	1334	if $self->{_eof};
771		1335
772	unshift @{ $self->{_queue} }, $cb;	1336	unshift @{ $self->{_queue} }, $cb;
773	last;	1337	last;
774	}	1338	}
775	} elsif ($self->{on_read}) {	1339	} elsif ($self->{on_read}) {
…		…
782	&& !@{ $self->{_queue} } # and the queue is still empty	1346	&& !@{ $self->{_queue} } # and the queue is still empty
783	&& $self->{on_read} # but we still have on_read	1347	&& $self->{on_read} # but we still have on_read
784	) {	1348	) {
785	# no further data will arrive	1349	# no further data will arrive
786	# so no progress can be made	1350	# so no progress can be made
787	$self->_error (&Errno::EPIPE, 1), return	1351	$self->_error (Errno::EPIPE, 1), return
788	if $self->{_eof};	1352	if $self->{_eof};
789		1353
790	last; # more data might arrive	1354	last; # more data might arrive
791	}	1355	}
792	} else {	1356	} else {
…		…
795	last;	1359	last;
796	}	1360	}
797	}	1361	}
798		1362
799	if ($self->{_eof}) {	1363	if ($self->{_eof}) {
800	if ($self->{on_eof}) {	1364	$self->{on_eof}
801	$self->{on_eof}($self)	1365	? $self->{on_eof}($self)
802	} else {	1366	: $self->_error (0, 1, "Unexpected end-of-file");
803	$self->_error (0, 1);	1367
804	}	1368	return;
		1369	}
		1370
		1371	if (
		1372	defined $self->{rbuf_max}
		1373	&& $self->{rbuf_max} < length $self->{rbuf}
		1374	) {
		1375	$self->_error (Errno::ENOSPC, 1), return;
805	}	1376	}
806		1377
807	# may need to restart read watcher	1378	# may need to restart read watcher
808	unless ($self->{_rw}) {	1379	unless ($self->{_rw}) {
809	$self->start_read	1380	$self->start_read
…		…
815		1386
816	This replaces the currently set C<on_read> callback, or clears it (when	1387	This replaces the currently set C<on_read> callback, or clears it (when
817	the new callback is C<undef>). See the description of C<on_read> in the	1388	the new callback is C<undef>). See the description of C<on_read> in the
818	constructor.	1389	constructor.
819		1390
		1391	This method may invoke callbacks (and therefore the handle might be
		1392	destroyed after it returns).
		1393
820	=cut	1394	=cut
821		1395
822	sub on_read {	1396	sub on_read {
823	my ($self, $cb) = @_;	1397	my ($self, $cb) = @_;
824		1398
825	$self->{on_read} = $cb;	1399	$self->{on_read} = $cb;
826	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1400	$self->_drain_rbuf if $cb;
827	}	1401	}
828		1402
829	=item $handle->rbuf	1403	=item $handle->rbuf
830		1404
831	Returns the read buffer (as a modifiable lvalue).	1405	Returns the read buffer (as a modifiable lvalue). You can also access the
		1406	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1407	much faster, and no less clean).
832		1408
833	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1409	The only operation allowed on the read buffer (apart from looking at it)
834	you want.	1410	is removing data from its beginning. Otherwise modifying or appending to
		1411	it is not allowed and will lead to hard-to-track-down bugs.
835		1412
836	NOTE: The read buffer should only be used or modified if the C<on_read>,	1413	NOTE: The read buffer should only be used or modified in the C<on_read>
837	C<push_read> or C<unshift_read> methods are used. The other read methods	1414	callback or when C<push_read> or C<unshift_read> are used with a single
838	automatically manage the read buffer.	1415	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1416	will manage the read buffer on their own.
839		1417
840	=cut	1418	=cut
841		1419
842	sub rbuf : lvalue {	1420	sub rbuf : lvalue {
843	$_[0]{rbuf}	1421	$_[0]{rbuf}
…		…
860		1438
861	If enough data was available, then the callback must remove all data it is	1439	If enough data was available, then the callback must remove all data it is
862	interested in (which can be none at all) and return a true value. After returning	1440	interested in (which can be none at all) and return a true value. After returning
863	true, it will be removed from the queue.	1441	true, it will be removed from the queue.
864		1442
		1443	These methods may invoke callbacks (and therefore the handle might be
		1444	destroyed after it returns).
		1445
865	=cut	1446	=cut
866		1447
867	our %RH;	1448	our %RH;
868		1449
869	sub register_read_type($$) {	1450	sub register_read_type($$) {
…		…
875	my $cb = pop;	1456	my $cb = pop;
876		1457
877	if (@_) {	1458	if (@_) {
878	my $type = shift;	1459	my $type = shift;
879		1460
		1461	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
880	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1462	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
881	->($self, $cb, @_);	1463	->($self, $cb, @_);
882	}	1464	}
883		1465
884	push @{ $self->{_queue} }, $cb;	1466	push @{ $self->{_queue} }, $cb;
885	$self->_drain_rbuf unless $self->{_in_drain};	1467	$self->_drain_rbuf;
886	}	1468	}
887		1469
888	sub unshift_read {	1470	sub unshift_read {
889	my $self = shift;	1471	my $self = shift;
890	my $cb = pop;	1472	my $cb = pop;
891		1473
892	if (@_) {	1474	if (@_) {
893	my $type = shift;	1475	my $type = shift;
894		1476
		1477	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
895	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1478	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
896	->($self, $cb, @_);	1479	->($self, $cb, @_);
897	}	1480	}
898		1481
899
900	unshift @{ $self->{_queue} }, $cb;	1482	unshift @{ $self->{_queue} }, $cb;
901	$self->_drain_rbuf unless $self->{_in_drain};	1483	$self->_drain_rbuf;
902	}	1484	}
903		1485
904	=item $handle->push_read (type => @args, $cb)	1486	=item $handle->push_read (type => @args, $cb)
905		1487
906	=item $handle->unshift_read (type => @args, $cb)	1488	=item $handle->unshift_read (type => @args, $cb)
907		1489
908	Instead of providing a callback that parses the data itself you can chose	1490	Instead of providing a callback that parses the data itself you can chose
909	between a number of predefined parsing formats, for chunks of data, lines	1491	between a number of predefined parsing formats, for chunks of data, lines
910	etc.	1492	etc. You can also specify the (fully qualified) name of a package, in
		1493	which case AnyEvent tries to load the package and then expects to find the
		1494	C<anyevent_read_type> function inside (see "custom read types", below).
911		1495
912	Predefined types are (if you have ideas for additional types, feel free to	1496	Predefined types are (if you have ideas for additional types, feel free to
913	drop by and tell us):	1497	drop by and tell us):
914		1498
915	=over 4	1499	=over 4
…		…
921	data.	1505	data.
922		1506
923	Example: read 2 bytes.	1507	Example: read 2 bytes.
924		1508
925	$handle->push_read (chunk => 2, sub {	1509	$handle->push_read (chunk => 2, sub {
926	warn "yay ", unpack "H*", $_[1];	1510	say "yay " . unpack "H*", $_[1];
927	});	1511	});
928		1512
929	=cut	1513	=cut
930		1514
931	register_read_type chunk => sub {	1515	register_read_type chunk => sub {
…		…
961		1545
962	register_read_type line => sub {	1546	register_read_type line => sub {
963	my ($self, $cb, $eol) = @_;	1547	my ($self, $cb, $eol) = @_;
964		1548
965	if (@_ < 3) {	1549	if (@_ < 3) {
966	# this is more than twice as fast as the generic code below	1550	# this is faster then the generic code below
967	sub {	1551	sub {
968	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;	1552	(my $pos = index $_[0]{rbuf}, "\012") >= 0
		1553	or return;
969		1554
		1555	(my $str = substr $_[0]{rbuf}, 0, $pos + 1, "") =~ s/(\015?\012)\Z// or die;
970	$cb->($_[0], $1, $2);	1556	$cb->($_[0], $str, "$1");
971	1	1557	1
972	}	1558	}
973	} else {	1559	} else {
974	$eol = quotemeta $eol unless ref $eol;	1560	$eol = quotemeta $eol unless ref $eol;
975	$eol = qr|^(.*?)($eol)|s;	1561	$eol = qr|^(.*?)($eol)|s;
976		1562
977	sub {	1563	sub {
978	$_[0]{rbuf} =~ s/$eol// or return;	1564	$_[0]{rbuf} =~ s/$eol// or return;
979		1565
980	$cb->($_[0], $1, $2);	1566	$cb->($_[0], "$1", "$2");
981	1	1567	1
982	}	1568	}
983	}	1569	}
984	};	1570	};
985		1571
…		…
1007	the receive buffer when neither C<$accept> nor C<$reject> match,	1593	the receive buffer when neither C<$accept> nor C<$reject> match,
1008	and everything preceding and including the match will be accepted	1594	and everything preceding and including the match will be accepted
1009	unconditionally. This is useful to skip large amounts of data that you	1595	unconditionally. This is useful to skip large amounts of data that you
1010	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1596	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
1011	have to start matching from the beginning. This is purely an optimisation	1597	have to start matching from the beginning. This is purely an optimisation
1012	and is usually worth only when you expect more than a few kilobytes.	1598	and is usually worth it only when you expect more than a few kilobytes.
1013		1599
1014	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1600	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
1015	expect the header to be very large (it isn't in practise, but...), we use	1601	expect the header to be very large (it isn't in practice, but...), we use
1016	a skip regex to skip initial portions. The skip regex is tricky in that	1602	a skip regex to skip initial portions. The skip regex is tricky in that
1017	it only accepts something not ending in either \015 or \012, as these are	1603	it only accepts something not ending in either \015 or \012, as these are
1018	required for the accept regex.	1604	required for the accept regex.
1019		1605
1020	$handle->push_read (regex =>	1606	$handle->push_read (regex =>
…		…
1033		1619
1034	sub {	1620	sub {
1035	# accept	1621	# accept
1036	if ($$rbuf =~ $accept) {	1622	if ($$rbuf =~ $accept) {
1037	$data .= substr $$rbuf, 0, $+[0], "";	1623	$data .= substr $$rbuf, 0, $+[0], "";
1038	$cb->($self, $data);	1624	$cb->($_[0], $data);
1039	return 1;	1625	return 1;
1040	}	1626	}
1041		1627
1042	# reject	1628	# reject
1043	if ($reject && $$rbuf =~ $reject) {	1629	if ($reject && $$rbuf =~ $reject) {
1044	$self->_error (&Errno::EBADMSG);	1630	$_[0]->_error (Errno::EBADMSG);
1045	}	1631	}
1046		1632
1047	# skip	1633	# skip
1048	if ($skip && $$rbuf =~ $skip) {	1634	if ($skip && $$rbuf =~ $skip) {
1049	$data .= substr $$rbuf, 0, $+[0], "";	1635	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1065	my ($self, $cb) = @_;	1651	my ($self, $cb) = @_;
1066		1652
1067	sub {	1653	sub {
1068	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1654	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1069	if ($_[0]{rbuf} =~ /[^0-9]/) {	1655	if ($_[0]{rbuf} =~ /[^0-9]/) {
1070	$self->_error (&Errno::EBADMSG);	1656	$_[0]->_error (Errno::EBADMSG);
1071	}	1657	}
1072	return;	1658	return;
1073	}	1659	}
1074		1660
1075	my $len = $1;	1661	my $len = $1;
1076		1662
1077	$self->unshift_read (chunk => $len, sub {	1663	$_[0]->unshift_read (chunk => $len, sub {
1078	my $string = $_[1];	1664	my $string = $_[1];
1079	$_[0]->unshift_read (chunk => 1, sub {	1665	$_[0]->unshift_read (chunk => 1, sub {
1080	if ($_[1] eq ",") {	1666	if ($_[1] eq ",") {
1081	$cb->($_[0], $string);	1667	$cb->($_[0], $string);
1082	} else {	1668	} else {
1083	$self->_error (&Errno::EBADMSG);	1669	$_[0]->_error (Errno::EBADMSG);
1084	}	1670	}
1085	});	1671	});
1086	});	1672	});
1087		1673
1088	1	1674	1
…		…
1135	}	1721	}
1136	};	1722	};
1137		1723
1138	=item json => $cb->($handle, $hash_or_arrayref)	1724	=item json => $cb->($handle, $hash_or_arrayref)
1139		1725
1140	Reads a JSON object or array, decodes it and passes it to the callback.	1726	Reads a JSON object or array, decodes it and passes it to the
		1727	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1141		1728
1142	If a C<json> object was passed to the constructor, then that will be used	1729	If a C<json> object was passed to the constructor, then that will be
1143	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1730	used for the final decode, otherwise it will create a L<JSON::XS> or
		1731	L<JSON::PP> coder object expecting UTF-8.
1144		1732
1145	This read type uses the incremental parser available with JSON version	1733	This read type uses the incremental parser available with JSON version
1146	2.09 (and JSON::XS version 2.2) and above. You have to provide a	1734	2.09 (and JSON::XS version 2.2) and above.
1147	dependency on your own: this module will load the JSON module, but
1148	AnyEvent does not depend on it itself.
1149		1735
1150	Since JSON texts are fully self-delimiting, the C<json> read and write	1736	Since JSON texts are fully self-delimiting, the C<json> read and write
1151	types are an ideal simple RPC protocol: just exchange JSON datagrams. See	1737	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
1152	the C<json> write type description, above, for an actual example.	1738	the C<json> write type description, above, for an actual example.
1153		1739
1154	=cut	1740	=cut
1155		1741
1156	register_read_type json => sub {	1742	register_read_type json => sub {
1157	my ($self, $cb) = @_;	1743	my ($self, $cb) = @_;
1158		1744
1159	require JSON;	1745	my $json = $self->{json} ||= json_coder;
1160		1746
1161	my $data;	1747	my $data;
1162	my $rbuf = \$self->{rbuf};
1163
1164	my $json = $self->{json} ||= JSON->new->utf8;
1165		1748
1166	sub {	1749	sub {
1167	my $ref = $json->incr_parse ($self->{rbuf});	1750	my $ref = eval { $json->incr_parse ($_[0]{rbuf}) };
1168		1751
1169	if ($ref) {	1752	if ($ref) {
1170	$self->{rbuf} = $json->incr_text;	1753	$_[0]{rbuf} = $json->incr_text;
1171	$json->incr_text = "";	1754	$json->incr_text = "";
1172	$cb->($self, $ref);	1755	$cb->($_[0], $ref);
1173		1756
1174	1	1757	1
		1758	} elsif ($@) {
		1759	# error case
		1760	$json->incr_skip;
		1761
		1762	$_[0]{rbuf} = $json->incr_text;
		1763	$json->incr_text = "";
		1764
		1765	$_[0]->_error (Errno::EBADMSG);
		1766
		1767	()
1175	} else {	1768	} else {
1176	$self->{rbuf} = "";	1769	$_[0]{rbuf} = "";
		1770
		1771	()
		1772	}
		1773	}
		1774	};
		1775
		1776	=item cbor => $cb->($handle, $scalar)
		1777
		1778	Reads a CBOR value, decodes it and passes it to the callback. When a parse
		1779	error occurs, an C<EBADMSG> error will be raised.
		1780
		1781	If a L<CBOR::XS> object was passed to the constructor, then that will be
		1782	used for the final decode, otherwise it will create a CBOR coder without
		1783	enabling any options.
		1784
		1785	You have to provide a dependency to L<CBOR::XS> on your own: this module
		1786	will load the L<CBOR::XS> module, but AnyEvent does not depend on it
		1787	itself.
		1788
		1789	Since CBOR values are fully self-delimiting, the C<cbor> read and write
		1790	types are an ideal simple RPC protocol: just exchange CBOR datagrams. See
		1791	the C<cbor> write type description, above, for an actual example.
		1792
		1793	=cut
		1794
		1795	register_read_type cbor => sub {
		1796	my ($self, $cb) = @_;
		1797
		1798	my $cbor = $self->{cbor} ||= cbor_coder;
		1799
		1800	my $data;
		1801
		1802	sub {
		1803	my (@value) = eval { $cbor->incr_parse ($_[0]{rbuf}) };
		1804
		1805	if (@value) {
		1806	$cb->($_[0], @value);
		1807
		1808	1
		1809	} elsif ($@) {
		1810	# error case
		1811	$cbor->incr_reset;
		1812
		1813	$_[0]->_error (Errno::EBADMSG);
		1814
		1815	()
		1816	} else {
1177	()	1817	()
1178	}	1818	}
1179	}	1819	}
1180	};	1820	};
1181		1821
…		…
1190	=cut	1830	=cut
1191		1831
1192	register_read_type storable => sub {	1832	register_read_type storable => sub {
1193	my ($self, $cb) = @_;	1833	my ($self, $cb) = @_;
1194		1834
1195	require Storable;	1835	require Storable unless $Storable::VERSION;
1196		1836
1197	sub {	1837	sub {
1198	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1838	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1199	defined (my $len = eval { unpack "w", $_[0]{rbuf} })	1839	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
1200	or return;	1840	or return;
…		…
1203		1843
1204	# bypass unshift if we already have the remaining chunk	1844	# bypass unshift if we already have the remaining chunk
1205	if ($format + $len <= length $_[0]{rbuf}) {	1845	if ($format + $len <= length $_[0]{rbuf}) {
1206	my $data = substr $_[0]{rbuf}, $format, $len;	1846	my $data = substr $_[0]{rbuf}, $format, $len;
1207	substr $_[0]{rbuf}, 0, $format + $len, "";	1847	substr $_[0]{rbuf}, 0, $format + $len, "";
		1848
1208	$cb->($_[0], Storable::thaw ($data));	1849	eval { $cb->($_[0], Storable::thaw ($data)); 1 }
		1850	or return $_[0]->_error (Errno::EBADMSG);
1209	} else {	1851	} else {
1210	# remove prefix	1852	# remove prefix
1211	substr $_[0]{rbuf}, 0, $format, "";	1853	substr $_[0]{rbuf}, 0, $format, "";
1212		1854
1213	# read remaining chunk	1855	# read remaining chunk
1214	$_[0]->unshift_read (chunk => $len, sub {	1856	$_[0]->unshift_read (chunk => $len, sub {
1215	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1857	eval { $cb->($_[0], Storable::thaw ($_[1])); 1 }
1216	$cb->($_[0], $ref);
1217	} else {
1218	$self->_error (&Errno::EBADMSG);	1858	or $_[0]->_error (Errno::EBADMSG);
1219	}
1220	});	1859	});
1221	}	1860	}
1222		1861
1223	1	1862	1
1224	}	1863	}
1225	};	1864	};
1226		1865
		1866	=item tls_detect => $cb->($handle, $detect, $major, $minor)
		1867
		1868	Checks the input stream for a valid SSL or TLS handshake TLSPaintext
		1869	record without consuming anything. Only SSL version 3 or higher
		1870	is handled, up to the fictituous protocol 4.x (but both SSL3+ and
		1871	SSL2-compatible framing is supported).
		1872
		1873	If it detects that the input data is likely TLS, it calls the callback
		1874	with a true value for C<$detect> and the (on-wire) TLS version as second
		1875	and third argument (C<$major> is C<3>, and C<$minor> is 0..3 for SSL
		1876	3.0, TLS 1.0, 1.1 and 1.2, respectively). If it detects the input to
		1877	be definitely not TLS, it calls the callback with a false value for
		1878	C<$detect>.
		1879
		1880	The callback could use this information to decide whether or not to start
		1881	TLS negotiation.
		1882
		1883	In all cases the data read so far is passed to the following read
		1884	handlers.
		1885
		1886	Usually you want to use the C<tls_autostart> read type instead.
		1887
		1888	If you want to design a protocol that works in the presence of TLS
		1889	dtection, make sure that any non-TLS data doesn't start with the octet 22
		1890	(ASCII SYN, 16 hex) or 128-255 (i.e. highest bit set). The checks this
		1891	read type does are a bit more strict, but might losen in the future to
		1892	accomodate protocol changes.
		1893
		1894	This read type does not rely on L<AnyEvent::TLS> (and thus, not on
		1895	L<Net::SSLeay>).
		1896
		1897	=item tls_autostart => $tls[, $tls_ctx]
		1898
		1899	Tries to detect a valid SSL or TLS handshake. If one is detected, it tries
		1900	to start tls by calling C<starttls> with the given arguments.
		1901
		1902	In practise, C<$tls> must be C<accept>, or a Net::SSLeay context that has
		1903	been configured to accept, as servers do not normally send a handshake on
		1904	their own and ths cannot be detected in this way.
		1905
		1906	See C<tls_detect> above for more details.
		1907
		1908	Example: give the client a chance to start TLS before accepting a text
		1909	line.
		1910
		1911	$hdl->push_read (tls_detect => "accept");
		1912	$hdl->push_read (line => sub {
		1913	print "received ", ($_[0]{tls} ? "encrypted" : "cleartext"), " <$_[1]>\n";
		1914	});
		1915
		1916	=cut
		1917
		1918	register_read_type tls_detect => sub {
		1919	my ($self, $cb) = @_;
		1920
		1921	sub {
		1922	# this regex matches a full or partial tls record
		1923	if (
		1924	# ssl3+: type(22=handshake) major(=3) minor(any) length_hi
		1925	$self->{rbuf} =~ /^(?:\z| \x16 (\z| [\x03\x04] (?:\z| . (?:\z| [\x00-\x40] ))))/xs
		1926	# ssl2 comapatible: len_hi len_lo type(1) major minor dummy(forlength)
		1927	or $self->{rbuf} =~ /^(?:\z| [\x80-\xff] (?:\z| . (?:\z| \x01 (\z| [\x03\x04] (?:\z| . (?:\z| . ))))))/xs
		1928	) {
		1929	return if 3 != length $1; # partial match, can't decide yet
		1930
		1931	# full match, valid TLS record
		1932	my ($major, $minor) = unpack "CC", $1;
		1933	$cb->($self, "accept", $major + $minor * 0.1);
		1934	} else {
		1935	# mismatch == guaranteed not TLS
		1936	$cb->($self, undef);
		1937	}
		1938
		1939	1
		1940	}
		1941	};
		1942
		1943	register_read_type tls_autostart => sub {
		1944	my ($self, @tls) = @_;
		1945
		1946	$RH{tls_detect}($self, sub {
		1947	return unless $_[1];
		1948	$_[0]->starttls (@tls);
		1949	})
		1950	};
		1951
1227	=back	1952	=back
1228		1953
1229	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1954	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1230		1955
1231	This function (not method) lets you add your own types to C<push_read>.	1956	Instead of one of the predefined types, you can also specify the name
		1957	of a package. AnyEvent will try to load the package and then expects to
		1958	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1959	progressively tries to load the parent package until it either finds the
		1960	function (good) or runs out of packages (bad).
1232		1961
1233	Whenever the given C<type> is used, C<push_read> will invoke the code	1962	Whenever this type is used, C<push_read> will invoke the function with the
1234	reference with the handle object, the callback and the remaining	1963	handle object, the original callback and the remaining arguments.
1235	arguments.
1236		1964
1237	The code reference is supposed to return a callback (usually a closure)	1965	The function is supposed to return a callback (usually a closure) that
1238	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1966	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1967	mentally treat the function as a "configurable read type to read callback"
		1968	converter.
1239		1969
1240	It should invoke the passed callback when it is done reading (remember to	1970	It should invoke the original callback when it is done reading (remember
1241	pass C<$handle> as first argument as all other callbacks do that).	1971	to pass C<$handle> as first argument as all other callbacks do that,
		1972	although there is no strict requirement on this).
1242		1973
1243	Note that this is a function, and all types registered this way will be
1244	global, so try to use unique names.
1245
1246	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1974	For examples, see the source of this module (F<perldoc -m
1247	search for C<register_read_type>)).	1975	AnyEvent::Handle>, search for C<register_read_type>)).
1248		1976
1249	=item $handle->stop_read	1977	=item $handle->stop_read
1250		1978
1251	=item $handle->start_read	1979	=item $handle->start_read
1252		1980
…		…
1258	Note that AnyEvent::Handle will automatically C<start_read> for you when	1986	Note that AnyEvent::Handle will automatically C<start_read> for you when
1259	you change the C<on_read> callback or push/unshift a read callback, and it	1987	you change the C<on_read> callback or push/unshift a read callback, and it
1260	will automatically C<stop_read> for you when neither C<on_read> is set nor	1988	will automatically C<stop_read> for you when neither C<on_read> is set nor
1261	there are any read requests in the queue.	1989	there are any read requests in the queue.
1262		1990
1263	These methods will have no effect when in TLS mode (as TLS doesn't support	1991	In older versions of this module (<= 5.3), these methods had no effect,
1264	half-duplex connections).	1992	as TLS does not support half-duplex connections. In current versions they
		1993	work as expected, as this behaviour is required to avoid certain resource
		1994	attacks, where the program would be forced to read (and buffer) arbitrary
		1995	amounts of data before being able to send some data. The drawback is that
		1996	some readings of the the SSL/TLS specifications basically require this
		1997	attack to be working, as SSL/TLS implementations might stall sending data
		1998	during a rehandshake.
		1999
		2000	As a guideline, during the initial handshake, you should not stop reading,
		2001	and as a client, it might cause problems, depending on your application.
1265		2002
1266	=cut	2003	=cut
1267		2004
1268	sub stop_read {	2005	sub stop_read {
1269	my ($self) = @_;	2006	my ($self) = @_;
1270		2007
1271	delete $self->{_rw} unless $self->{tls};	2008	delete $self->{_rw};
1272	}	2009	}
1273		2010
1274	sub start_read {	2011	sub start_read {
1275	my ($self) = @_;	2012	my ($self) = @_;
1276		2013
1277	unless ($self->{_rw} || $self->{_eof}) {	2014	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1278	Scalar::Util::weaken $self;	2015	Scalar::Util::weaken $self;
1279		2016
1280	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	2017	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1281	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});	2018	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1282	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	2019	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1283		2020
1284	if ($len > 0) {	2021	if ($len > 0) {
1285	$self->{_activity} = AnyEvent->now;	2022	$self->{_activity} = $self->{_ractivity} = AE::now;
1286		2023
1287	if ($self->{tls}) {	2024	if ($self->{tls}) {
1288	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);	2025	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1289		2026
1290	&_dotls ($self);	2027	&_dotls ($self);
1291	} else {	2028	} else {
1292	$self->_drain_rbuf unless $self->{_in_drain};	2029	$self->_drain_rbuf;
		2030	}
		2031
		2032	if ($len == $self->{read_size}) {
		2033	$self->{read_size} *= 2;
		2034	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		2035	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
1293	}	2036	}
1294		2037
1295	} elsif (defined $len) {	2038	} elsif (defined $len) {
1296	delete $self->{_rw};	2039	delete $self->{_rw};
1297	$self->{_eof} = 1;	2040	$self->{_eof} = 1;
1298	$self->_drain_rbuf unless $self->{_in_drain};	2041	$self->_drain_rbuf;
1299		2042
1300	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	2043	} elsif ($! != EAGAIN && $! != EINTR && $! != EWOULDBLOCK && $! != WSAEWOULDBLOCK) {
1301	return $self->_error ($!, 1);	2044	return $self->_error ($!, 1);
1302	}	2045	}
1303	});	2046	};
		2047	}
		2048	}
		2049
		2050	our $ERROR_SYSCALL;
		2051	our $ERROR_WANT_READ;
		2052
		2053	sub _tls_error {
		2054	my ($self, $err) = @_;
		2055
		2056	return $self->_error ($!, 1)
		2057	if $err == Net::SSLeay::ERROR_SYSCALL ();
		2058
		2059	my $err = Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		2060
		2061	# reduce error string to look less scary
		2062	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		2063
		2064	if ($self->{_on_starttls}) {
		2065	(delete $self->{_on_starttls})->($self, undef, $err);
		2066	&_freetls;
		2067	} else {
		2068	&_freetls;
		2069	$self->_error (Errno::EPROTO, 1, $err);
1304	}	2070	}
1305	}	2071	}
1306		2072
1307	# poll the write BIO and send the data if applicable	2073	# poll the write BIO and send the data if applicable
		2074	# also decode read data if possible
		2075	# this is basiclaly our TLS state machine
		2076	# more efficient implementations are possible with openssl,
		2077	# but not with the buggy and incomplete Net::SSLeay.
1308	sub _dotls {	2078	sub _dotls {
1309	my ($self) = @_;	2079	my ($self) = @_;
1310		2080
1311	my $tmp;	2081	my $tmp;
1312		2082
1313	if (length $self->{_tls_wbuf}) {	2083	while (length $self->{_tls_wbuf}) {
1314	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	2084	if (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) <= 0) {
1315	substr $self->{_tls_wbuf}, 0, $tmp, "";	2085	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		2086
		2087	return $self->_tls_error ($tmp)
		2088	if $tmp != $ERROR_WANT_READ
		2089	&& ($tmp != $ERROR_SYSCALL || $!);
		2090
		2091	last;
1316	}	2092	}
		2093
		2094	substr $self->{_tls_wbuf}, 0, $tmp, "";
1317	}	2095	}
1318		2096
1319	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {	2097	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1320	unless (length $tmp) {	2098	unless (length $tmp) {
1321	# let's treat SSL-eof as we treat normal EOF	2099	$self->{_on_starttls}
1322	delete $self->{_rw};	2100	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
1323	$self->{_eof} = 1;
1324	&_freetls;	2101	&_freetls;
		2102
		2103	if ($self->{on_stoptls}) {
		2104	$self->{on_stoptls}($self);
		2105	return;
		2106	} else {
		2107	# let's treat SSL-eof as we treat normal EOF
		2108	delete $self->{_rw};
		2109	$self->{_eof} = 1;
		2110	}
1325	}	2111	}
1326		2112
1327	$self->{rbuf} .= $tmp;	2113	$self->{_tls_rbuf} .= $tmp;
1328	$self->_drain_rbuf unless $self->{_in_drain};	2114	$self->_drain_rbuf;
1329	$self->{tls} or return; # tls session might have gone away in callback	2115	$self->{tls} or return; # tls session might have gone away in callback
1330	}	2116	}
1331		2117
1332	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);	2118	$tmp = Net::SSLeay::get_error ($self->{tls}, -1); # -1 is not neccessarily correct, but Net::SSLeay doesn't tell us
1333
1334	if ($tmp != Net::SSLeay::ERROR_WANT_READ ()) {
1335	if ($tmp == Net::SSLeay::ERROR_SYSCALL ()) {
1336	return $self->_error ($!, 1);	2119	return $self->_tls_error ($tmp)
1337	} elsif ($tmp == Net::SSLeay::ERROR_SSL ()) {	2120	if $tmp != $ERROR_WANT_READ
1338	return $self->_error (&Errno::EIO, 1);	2121	&& ($tmp != $ERROR_SYSCALL || $!);
1339	}
1340
1341	# all other errors are fine for our purposes
1342	}
1343		2122
1344	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {	2123	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1345	$self->{wbuf} .= $tmp;	2124	$self->{wbuf} .= $tmp;
1346	$self->_drain_wbuf;	2125	$self->_drain_wbuf;
		2126	$self->{tls} or return; # tls session might have gone away in callback
1347	}	2127	}
		2128
		2129	$self->{_on_starttls}
		2130	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
		2131	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1348	}	2132	}
1349		2133
1350	=item $handle->starttls ($tls[, $tls_ctx])	2134	=item $handle->starttls ($tls[, $tls_ctx])
1351		2135
1352	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	2136	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1353	object is created, you can also do that at a later time by calling	2137	object is created, you can also do that at a later time by calling
1354	C<starttls>.	2138	C<starttls>. See the C<tls> constructor argument for general info.
		2139
		2140	Starting TLS is currently an asynchronous operation - when you push some
		2141	write data and then call C<< ->starttls >> then TLS negotiation will start
		2142	immediately, after which the queued write data is then sent. This might
		2143	change in future versions, so best make sure you have no outstanding write
		2144	data when calling this method.
1355		2145
1356	The first argument is the same as the C<tls> constructor argument (either	2146	The first argument is the same as the C<tls> constructor argument (either
1357	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	2147	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1358		2148
1359	The second argument is the optional C<Net::SSLeay::CTX> object that is	2149	The second argument is the optional C<AnyEvent::TLS> object that is used
1360	used when AnyEvent::Handle has to create its own TLS connection object.	2150	when AnyEvent::Handle has to create its own TLS connection object, or
		2151	a hash reference with C<< key => value >> pairs that will be used to
		2152	construct a new context.
1361		2153
1362	The TLS connection object will end up in C<< $handle->{tls} >> after this	2154	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1363	call and can be used or changed to your liking. Note that the handshake	2155	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1364	might have already started when this function returns.	2156	changed to your liking. Note that the handshake might have already started
		2157	when this function returns.
1365		2158
1366	If it an error to start a TLS handshake more than once per	2159	Due to bugs in OpenSSL, it might or might not be possible to do multiple
1367	AnyEvent::Handle object (this is due to bugs in OpenSSL).	2160	handshakes on the same stream. It is best to not attempt to use the
		2161	stream after stopping TLS.
1368		2162
		2163	This method may invoke callbacks (and therefore the handle might be
		2164	destroyed after it returns).
		2165
1369	=cut	2166	=cut
		2167
		2168	our %TLS_CACHE; #TODO not yet documented, should we?
1370		2169
1371	sub starttls {	2170	sub starttls {
1372	my ($self, $ssl, $ctx) = @_;	2171	my ($self, $tls, $ctx) = @_;
1373		2172
1374	require Net::SSLeay;	2173	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
1375
1376	Carp::croak "it is an error to call starttls more than once on an Anyevent::Handle object"
1377	if $self->{tls};	2174	if $self->{tls};
		2175
		2176	unless (defined $AnyEvent::TLS::VERSION) {
		2177	eval {
		2178	require Net::SSLeay;
		2179	require AnyEvent::TLS;
		2180	1
		2181	} or return $self->_error (Errno::EPROTO, 1, "TLS support not available on this system");
		2182	}
		2183
		2184	$self->{tls} = $tls;
		2185	$self->{tls_ctx} = $ctx if @_ > 2;
		2186
		2187	return unless $self->{fh};
		2188
		2189	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		2190	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		2191
		2192	$tls = delete $self->{tls};
		2193	$ctx = $self->{tls_ctx};
		2194
		2195	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		2196
		2197	if ("HASH" eq ref $ctx) {
		2198	if ($ctx->{cache}) {
		2199	my $key = $ctx+0;
		2200	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		2201	} else {
		2202	$ctx = new AnyEvent::TLS %$ctx;
		2203	}
		2204	}
1378		2205
1379	if ($ssl eq "accept") {	2206	$self->{tls_ctx} = $ctx || TLS_CTX ();
1380	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	2207	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1381	Net::SSLeay::set_accept_state ($ssl);
1382	} elsif ($ssl eq "connect") {
1383	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());
1384	Net::SSLeay::set_connect_state ($ssl);
1385	}
1386
1387	$self->{tls} = $ssl;
1388		2208
1389	# basically, this is deep magic (because SSL_read should have the same issues)	2209	# basically, this is deep magic (because SSL_read should have the same issues)
1390	# but the openssl maintainers basically said: "trust us, it just works".	2210	# but the openssl maintainers basically said: "trust us, it just works".
1391	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	2211	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1392	# and mismaintained ssleay-module doesn't even offer them).	2212	# and mismaintained ssleay-module doesn't even offer them).
…		…
1396	#	2216	#
1397	# note that we do not try to keep the length constant between writes as we are required to do.	2217	# note that we do not try to keep the length constant between writes as we are required to do.
1398	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	2218	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1399	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to	2219	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
1400	# have identity issues in that area.	2220	# have identity issues in that area.
1401	Net::SSLeay::CTX_set_mode ($self->{tls},	2221	# Net::SSLeay::CTX_set_mode ($ssl,
1402	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	2222	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1403	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	2223	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		2224	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1404		2225
1405	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2226	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1406	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2227	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1407		2228
		2229	Net::SSLeay::BIO_write ($self->{_rbio}, $self->{rbuf});
		2230	$self->{rbuf} = "";
		2231
1408	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	2232	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
		2233
		2234	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
		2235	if $self->{on_starttls};
1409		2236
1410	&_dotls; # need to trigger the initial handshake	2237	&_dotls; # need to trigger the initial handshake
1411	$self->start_read; # make sure we actually do read	2238	$self->start_read; # make sure we actually do read
1412	}	2239	}
1413		2240
1414	=item $handle->stoptls	2241	=item $handle->stoptls
1415		2242
1416	Shuts down the SSL connection - this makes a proper EOF handshake by	2243	Shuts down the SSL connection - this makes a proper EOF handshake by
1417	sending a close notify to the other side, but since OpenSSL doesn't	2244	sending a close notify to the other side, but since OpenSSL doesn't
1418	support non-blocking shut downs, it is not possible to re-use the stream	2245	support non-blocking shut downs, it is not guaranteed that you can re-use
1419	afterwards.	2246	the stream afterwards.
		2247
		2248	This method may invoke callbacks (and therefore the handle might be
		2249	destroyed after it returns).
1420		2250
1421	=cut	2251	=cut
1422		2252
1423	sub stoptls {	2253	sub stoptls {
1424	my ($self) = @_;	2254	my ($self) = @_;
1425		2255
1426	if ($self->{tls}) {	2256	if ($self->{tls} && $self->{fh}) {
1427	Net::SSLeay::shutdown ($self->{tls});	2257	Net::SSLeay::shutdown ($self->{tls});
1428		2258
1429	&_dotls;	2259	&_dotls;
1430		2260
1431	# we don't give a shit. no, we do, but we can't. no...	2261	# # we don't give a shit. no, we do, but we can't. no...#d#
1432	# we, we... have to use openssl :/	2262	# # we, we... have to use openssl :/#d#
1433	&_freetls;	2263	# &_freetls;#d#
1434	}	2264	}
1435	}	2265	}
1436		2266
1437	sub _freetls {	2267	sub _freetls {
1438	my ($self) = @_;	2268	my ($self) = @_;
1439		2269
1440	return unless $self->{tls};	2270	return unless $self->{tls};
1441		2271
1442	Net::SSLeay::free (delete $self->{tls});	2272	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2273	if $self->{tls} > 0;
1443		2274
1444	delete @$self{qw(_rbio _wbio _tls_wbuf)};	2275	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1445	}	2276	}
		2277
		2278	=item $handle->resettls
		2279
		2280	This rarely-used method simply resets and TLS state on the handle, usually
		2281	causing data loss.
		2282
		2283	One case where it may be useful is when you want to skip over the data in
		2284	the stream but you are not interested in interpreting it, so data loss is
		2285	no concern.
		2286
		2287	=cut
		2288
		2289	*resettls = \&_freetls;
1446		2290
1447	sub DESTROY {	2291	sub DESTROY {
1448	my $self = shift;	2292	my ($self) = @_;
1449		2293
1450	&_freetls;	2294	&_freetls;
1451		2295
1452	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2296	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1453		2297
1454	if ($linger && length $self->{wbuf}) {	2298	if ($linger && length $self->{wbuf} && $self->{fh}) {
1455	my $fh = delete $self->{fh};	2299	my $fh = delete $self->{fh};
1456	my $wbuf = delete $self->{wbuf};	2300	my $wbuf = delete $self->{wbuf};
1457		2301
1458	my @linger;	2302	my @linger;
1459		2303
1460	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2304	push @linger, AE::io $fh, 1, sub {
1461	my $len = syswrite $fh, $wbuf, length $wbuf;	2305	my $len = syswrite $fh, $wbuf, length $wbuf;
1462		2306
1463	if ($len > 0) {	2307	if ($len > 0) {
1464	substr $wbuf, 0, $len, "";	2308	substr $wbuf, 0, $len, "";
1465	} else {	2309	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != EWOULDBLOCK && $! != WSAEWOULDBLOCK)) {
1466	@linger = (); # end	2310	@linger = (); # end
1467	}	2311	}
1468	});	2312	};
1469	push @linger, AnyEvent->timer (after => $linger, cb => sub {	2313	push @linger, AE::timer $linger, 0, sub {
1470	@linger = ();	2314	@linger = ();
1471	});	2315	};
1472	}	2316	}
1473	}	2317	}
1474		2318
1475	=item $handle->destroy	2319	=item $handle->destroy
1476		2320
1477	Shut's down the handle object as much as possible - this call ensures that	2321	Shuts down the handle object as much as possible - this call ensures that
1478	no further callbacks will be invoked and resources will be freed as much	2322	no further callbacks will be invoked and as many resources as possible
1479	as possible. You must not call any methods on the object afterwards.	2323	will be freed. Any method you will call on the handle object after
		2324	destroying it in this way will be silently ignored (and it will return the
		2325	empty list).
		2326
		2327	Normally, you can just "forget" any references to an AnyEvent::Handle
		2328	object and it will simply shut down. This works in fatal error and EOF
		2329	callbacks, as well as code outside. It does I<NOT> work in a read or write
		2330	callback, so when you want to destroy the AnyEvent::Handle object from
		2331	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		2332	that case.
		2333
		2334	Destroying the handle object in this way has the advantage that callbacks
		2335	will be removed as well, so if those are the only reference holders (as
		2336	is common), then one doesn't need to do anything special to break any
		2337	reference cycles.
1480		2338
1481	The handle might still linger in the background and write out remaining	2339	The handle might still linger in the background and write out remaining
1482	data, as specified by the C<linger> option, however.	2340	data, as specified by the C<linger> option, however.
1483		2341
1484	=cut	2342	=cut
…		…
1486	sub destroy {	2344	sub destroy {
1487	my ($self) = @_;	2345	my ($self) = @_;
1488		2346
1489	$self->DESTROY;	2347	$self->DESTROY;
1490	%$self = ();	2348	%$self = ();
		2349	bless $self, "AnyEvent::Handle::destroyed";
1491	}	2350	}
		2351
		2352	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2353	#nop
		2354	}
		2355
		2356	=item $handle->destroyed
		2357
		2358	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2359	->destroy >>, true otherwise.
		2360
		2361	Can be useful to decide whether the handle is still valid after some
		2362	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2363	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2364	can destroy the handle, so work can be avoided by checking sometimes:
		2365
		2366	$hdl->starttls ("accept");
		2367	return if $hdl->destroyed;
		2368	$hdl->push_write (...
		2369
		2370	Note that the call to C<push_write> will silently be ignored if the handle
		2371	has been destroyed, so often you can just ignore the possibility of the
		2372	handle being destroyed.
		2373
		2374	=cut
		2375
		2376	sub destroyed { 0 }
		2377	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1492		2378
1493	=item AnyEvent::Handle::TLS_CTX	2379	=item AnyEvent::Handle::TLS_CTX
1494		2380
1495	This function creates and returns the Net::SSLeay::CTX object used by	2381	This function creates and returns the AnyEvent::TLS object used by default
1496	default for TLS mode.	2382	for TLS mode.
1497		2383
1498	The context is created like this:	2384	The context is created by calling L<AnyEvent::TLS> without any arguments.
1499
1500	Net::SSLeay::load_error_strings;
1501	Net::SSLeay::SSLeay_add_ssl_algorithms;
1502	Net::SSLeay::randomize;
1503
1504	my $CTX = Net::SSLeay::CTX_new;
1505
1506	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1507		2385
1508	=cut	2386	=cut
1509		2387
1510	our $TLS_CTX;	2388	our $TLS_CTX;
1511		2389
1512	sub TLS_CTX() {	2390	sub TLS_CTX() {
1513	$TLS_CTX || do {	2391	$TLS_CTX ||= do {
1514	require Net::SSLeay;	2392	require AnyEvent::TLS;
1515		2393
1516	Net::SSLeay::load_error_strings ();	2394	new AnyEvent::TLS
1517	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1518	Net::SSLeay::randomize ();
1519
1520	$TLS_CTX = Net::SSLeay::CTX_new ();
1521
1522	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1523
1524	$TLS_CTX
1525	}	2395	}
1526	}	2396	}
1527		2397
1528	=back	2398	=back
1529		2399
1530		2400
1531	=head1 NONFREQUENTLY ASKED QUESTIONS	2401	=head1 NONFREQUENTLY ASKED QUESTIONS
1532		2402
1533	=over 4	2403	=over 4
		2404
		2405	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2406	still get further invocations!
		2407
		2408	That's because AnyEvent::Handle keeps a reference to itself when handling
		2409	read or write callbacks.
		2410
		2411	It is only safe to "forget" the reference inside EOF or error callbacks,
		2412	from within all other callbacks, you need to explicitly call the C<<
		2413	->destroy >> method.
		2414
		2415	=item Why is my C<on_eof> callback never called?
		2416
		2417	Probably because your C<on_error> callback is being called instead: When
		2418	you have outstanding requests in your read queue, then an EOF is
		2419	considered an error as you clearly expected some data.
		2420
		2421	To avoid this, make sure you have an empty read queue whenever your handle
		2422	is supposed to be "idle" (i.e. connection closes are O.K.). You can set
		2423	an C<on_read> handler that simply pushes the first read requests in the
		2424	queue.
		2425
		2426	See also the next question, which explains this in a bit more detail.
		2427
		2428	=item How can I serve requests in a loop?
		2429
		2430	Most protocols consist of some setup phase (authentication for example)
		2431	followed by a request handling phase, where the server waits for requests
		2432	and handles them, in a loop.
		2433
		2434	There are two important variants: The first (traditional, better) variant
		2435	handles requests until the server gets some QUIT command, causing it to
		2436	close the connection first (highly desirable for a busy TCP server). A
		2437	client dropping the connection is an error, which means this variant can
		2438	detect an unexpected detection close.
		2439
		2440	To handle this case, always make sure you have a non-empty read queue, by
		2441	pushing the "read request start" handler on it:
		2442
		2443	# we assume a request starts with a single line
		2444	my @start_request; @start_request = (line => sub {
		2445	my ($hdl, $line) = @_;
		2446
		2447	... handle request
		2448
		2449	# push next request read, possibly from a nested callback
		2450	$hdl->push_read (@start_request);
		2451	});
		2452
		2453	# auth done, now go into request handling loop
		2454	# now push the first @start_request
		2455	$hdl->push_read (@start_request);
		2456
		2457	By always having an outstanding C<push_read>, the handle always expects
		2458	some data and raises the C<EPIPE> error when the connction is dropped
		2459	unexpectedly.
		2460
		2461	The second variant is a protocol where the client can drop the connection
		2462	at any time. For TCP, this means that the server machine may run out of
		2463	sockets easier, and in general, it means you cannot distinguish a protocl
		2464	failure/client crash from a normal connection close. Nevertheless, these
		2465	kinds of protocols are common (and sometimes even the best solution to the
		2466	problem).
		2467
		2468	Having an outstanding read request at all times is possible if you ignore
		2469	C<EPIPE> errors, but this doesn't help with when the client drops the
		2470	connection during a request, which would still be an error.
		2471
		2472	A better solution is to push the initial request read in an C<on_read>
		2473	callback. This avoids an error, as when the server doesn't expect data
		2474	(i.e. is idly waiting for the next request, an EOF will not raise an
		2475	error, but simply result in an C<on_eof> callback. It is also a bit slower
		2476	and simpler:
		2477
		2478	# auth done, now go into request handling loop
		2479	$hdl->on_read (sub {
		2480	my ($hdl) = @_;
		2481
		2482	# called each time we receive data but the read queue is empty
		2483	# simply start read the request
		2484
		2485	$hdl->push_read (line => sub {
		2486	my ($hdl, $line) = @_;
		2487
		2488	... handle request
		2489
		2490	# do nothing special when the request has been handled, just
		2491	# let the request queue go empty.
		2492	});
		2493	});
		2494
		2495	=item I get different callback invocations in TLS mode/Why can't I pause
		2496	reading?
		2497
		2498	Unlike, say, TCP, TLS connections do not consist of two independent
		2499	communication channels, one for each direction. Or put differently, the
		2500	read and write directions are not independent of each other: you cannot
		2501	write data unless you are also prepared to read, and vice versa.
		2502
		2503	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
		2504	callback invocations when you are not expecting any read data - the reason
		2505	is that AnyEvent::Handle always reads in TLS mode.
		2506
		2507	During the connection, you have to make sure that you always have a
		2508	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2509	connection (or when you no longer want to use it) you can call the
		2510	C<destroy> method.
1534		2511
1535	=item How do I read data until the other side closes the connection?	2512	=item How do I read data until the other side closes the connection?
1536		2513
1537	If you just want to read your data into a perl scalar, the easiest way	2514	If you just want to read your data into a perl scalar, the easiest way
1538	to achieve this is by setting an C<on_read> callback that does nothing,	2515	to achieve this is by setting an C<on_read> callback that does nothing,
…		…
1541		2518
1542	$handle->on_read (sub { });	2519	$handle->on_read (sub { });
1543	$handle->on_eof (undef);	2520	$handle->on_eof (undef);
1544	$handle->on_error (sub {	2521	$handle->on_error (sub {
1545	my $data = delete $_[0]{rbuf};	2522	my $data = delete $_[0]{rbuf};
1546	undef $handle;
1547	});	2523	});
		2524
		2525	Note that this example removes the C<rbuf> member from the handle object,
		2526	which is not normally allowed by the API. It is expressly permitted in
		2527	this case only, as the handle object needs to be destroyed afterwards.
1548		2528
1549	The reason to use C<on_error> is that TCP connections, due to latencies	2529	The reason to use C<on_error> is that TCP connections, due to latencies
1550	and packets loss, might get closed quite violently with an error, when in	2530	and packets loss, might get closed quite violently with an error, when in
1551	fact, all data has been received.	2531	fact all data has been received.
1552		2532
1553	It is usually better to use acknowledgements when transfering data,	2533	It is usually better to use acknowledgements when transferring data,
1554	to make sure the other side hasn't just died and you got the data	2534	to make sure the other side hasn't just died and you got the data
1555	intact. This is also one reason why so many internet protocols have an	2535	intact. This is also one reason why so many internet protocols have an
1556	explicit QUIT command.	2536	explicit QUIT command.
1557
1558		2537
1559	=item I don't want to destroy the handle too early - how do I wait until	2538	=item I don't want to destroy the handle too early - how do I wait until
1560	all data has been written?	2539	all data has been written?
1561		2540
1562	After writing your last bits of data, set the C<on_drain> callback	2541	After writing your last bits of data, set the C<on_drain> callback
…		…
1564	C<low_water_mark> this will be called precisely when all data has been	2543	C<low_water_mark> this will be called precisely when all data has been
1565	written to the socket:	2544	written to the socket:
1566		2545
1567	$handle->push_write (...);	2546	$handle->push_write (...);
1568	$handle->on_drain (sub {	2547	$handle->on_drain (sub {
1569	warn "all data submitted to the kernel\n";	2548	AE::log debug => "All data submitted to the kernel.";
1570	undef $handle;	2549	undef $handle;
1571	});	2550	});
1572		2551
1573	=item I get different callback invocations in TLS mode/Why can't I pause	2552	If you just want to queue some data and then signal EOF to the other side,
1574	reading?	2553	consider using C<< ->push_shutdown >> instead.
1575		2554
1576	Unlike, say, TCP, TLS conenctions do not consist of two independent	2555	=item I want to contact a TLS/SSL server, I don't care about security.
1577	communication channels, one for each direction. Or put differently. the
1578	read and write directions are not independent of each other: you cannot
1579	write data unless you are also prepared to read, and vice versa.
1580		2556
1581	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>	2557	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
1582	callback invocations when you are not expecting any read data - the reason	2558	connect to it and then create the AnyEvent::Handle with the C<tls>
1583	is that AnyEvent::Handle always reads in TLS mode.	2559	parameter:
1584		2560
1585	During the connection, you have to make sure that you always have a	2561	tcp_connect $host, $port, sub {
1586	non-empty read-queue, or an C<on_read> watcher. At the end of the	2562	my ($fh) = @_;
1587	connection (or when you no longer want to use it) you can call the	2563
1588	C<destroy> method.	2564	my $handle = new AnyEvent::Handle
		2565	fh => $fh,
		2566	tls => "connect",
		2567	on_error => sub { ... };
		2568
		2569	$handle->push_write (...);
		2570	};
		2571
		2572	=item I want to contact a TLS/SSL server, I do care about security.
		2573
		2574	Then you should additionally enable certificate verification, including
		2575	peername verification, if the protocol you use supports it (see
		2576	L<AnyEvent::TLS>, C<verify_peername>).
		2577
		2578	E.g. for HTTPS:
		2579
		2580	tcp_connect $host, $port, sub {
		2581	my ($fh) = @_;
		2582
		2583	my $handle = new AnyEvent::Handle
		2584	fh => $fh,
		2585	peername => $host,
		2586	tls => "connect",
		2587	tls_ctx => { verify => 1, verify_peername => "https" },
		2588	...
		2589
		2590	Note that you must specify the hostname you connected to (or whatever
		2591	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2592	peername verification will be done.
		2593
		2594	The above will use the system-dependent default set of trusted CA
		2595	certificates. If you want to check against a specific CA, add the
		2596	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2597
		2598	tls_ctx => {
		2599	verify => 1,
		2600	verify_peername => "https",
		2601	ca_file => "my-ca-cert.pem",
		2602	},
		2603
		2604	=item I want to create a TLS/SSL server, how do I do that?
		2605
		2606	Well, you first need to get a server certificate and key. You have
		2607	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2608	self-signed certificate (cheap. check the search engine of your choice,
		2609	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2610	nice program for that purpose).
		2611
		2612	Then create a file with your private key (in PEM format, see
		2613	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2614	file should then look like this:
		2615
		2616	-----BEGIN RSA PRIVATE KEY-----
		2617	...header data
		2618	... lots of base64'y-stuff
		2619	-----END RSA PRIVATE KEY-----
		2620
		2621	-----BEGIN CERTIFICATE-----
		2622	... lots of base64'y-stuff
		2623	-----END CERTIFICATE-----
		2624
		2625	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2626	specify this file as C<cert_file>:
		2627
		2628	tcp_server undef, $port, sub {
		2629	my ($fh) = @_;
		2630
		2631	my $handle = new AnyEvent::Handle
		2632	fh => $fh,
		2633	tls => "accept",
		2634	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2635	...
		2636
		2637	When you have intermediate CA certificates that your clients might not
		2638	know about, just append them to the C<cert_file>.
1589		2639
1590	=back	2640	=back
1591
1592		2641
1593	=head1 SUBCLASSING AnyEvent::Handle	2642	=head1 SUBCLASSING AnyEvent::Handle
1594		2643
1595	In many cases, you might want to subclass AnyEvent::Handle.	2644	In many cases, you might want to subclass AnyEvent::Handle.
1596		2645
…		…
1613		2662
1614	=item * all members not documented here and not prefixed with an underscore	2663	=item * all members not documented here and not prefixed with an underscore
1615	are free to use in subclasses.	2664	are free to use in subclasses.
1616		2665
1617	Of course, new versions of AnyEvent::Handle may introduce more "public"	2666	Of course, new versions of AnyEvent::Handle may introduce more "public"
1618	member variables, but thats just life, at least it is documented.	2667	member variables, but that's just life. At least it is documented.
1619		2668
1620	=back	2669	=back
1621		2670
1622	=head1 AUTHOR	2671	=head1 AUTHOR
1623		2672
1624	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	2673	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
1625		2674
1626	=cut	2675	=cut
1627		2676
1628	1; # End of AnyEvent::Handle	2677	1
		2678

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines