EV/Makefile.PL

use 5.008002;

use strict qw(vars subs);
use Config;
use ExtUtils::MakeMaker;

unless (-e "libev/ev_epoll.c") {
   print <<EOF;

***
*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,
*** you also have to check-out the "libev" module from the same CVS
*** repository into the EV dir (i.e. EV/libev from outside).
***

EOF
   exit 1;
}

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Welcome to EV configuration. If you are in a hurry, just press return here
and hope for the best. The defaults should usually do.

EOF

if (prompt ("Skip further questions and use defaults (y/n)?", "y") =~ /[yY]/) {
   $ENV{PERL_MM_USE_DEFAULT} = 1;
}

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


POSIX optionally offers support for a monotonic clock source. EV
can take advantage of this clock source to detect time jumps more
reliably. Unfortunately, some systems are bound to be broken, so you can
disable this here: you can completely disable the detection and use of
the monotonic clock by answering 'n' here. Support for this clock type
will otherwise be autodetected at both compile- and runtime. (this setting
currently affects the use of nanosleep over select as well).

EOF

my $DEFINE .= " -DEV_USE_MONOTONIC=" . (0 + (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


POSIX optionally offers support for a (potentially) high-resolution
realtime clock interface. In a good implementation, using it is faster
than the normal method of using gettimeofday. Unfortunately, this option
is also bound to be broken on some systems, and current EV versions do not
actually call gettimeofday very often, so it defaults to no.

EOF

$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


EV can use various backends with various portability issues. The select
backend is the most portable and makes for a good fallback, but it can be
limited to a low number of file descriptors and/or might not compile. If
you have problems with compiling ev_select.c, you might try to play around
with disabling it here, or forcing it to use the fd_set provided by your
OS, via the next question. I highly recommend keeping it in.

EOF

if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
   $DEFINE .= " -DEV_USE_SELECT=1";

   print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


The select backend can operate in two modes. One uses the system-provided
fd_set and is usually limited to 1024 file descriptors (64 on windows),
the other requires your header files to define NFDBITS and declare a
suitable fd_mask type. If you run into problems compiling ev_select.c, you
can try forcing the use of the system fd_set here.

EOF

   if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
      $DEFINE .= " -DEV_SELECT_USE_FD_SET";
   } 
} else {
   $DEFINE .= " -DEV_USE_SELECT=0";
} 

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


The second very portable backend is poll(2). It does not exist on windows
and various versions of Mac OS X (and on the other versions it simply
doesn't work), but works basically everywhere else. It is recommended to use
the default here unless you run into compile problems in ev_poll.c.

EOF

$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (-e "/usr/include/poll.h") ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Select and poll make it hard to write efficient servers, especially if the
number of active connections is much lower than the watched ones. GNU/Linux
systems have a more scalable method called "epoll", which EV can use. For
this to work, both your kernel and glibc have to support epoll, but if you
can compile it, the detection will be done at runtime, and EV will safely
fall back to using select when epoll isn't available. If unsure, accept
the default.

EOF

my $can_epoll = -e "/usr/include/sys/epoll.h";
$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Similarly to the epoll backend above, EV can take advantage of kqueue on
many BSD systems. Support for kqueue will be detected at runtime, with a
safe fallback to other methods when it cannot be used.

Note that kqueue is broken on most operating systems, so by default it
won't be used on many platforms, but you can still create your own event
loop with kqueue backend if you ask specifically for it.

Here is what we know:

NetBSD:  partially working in at least 3.1 and later. Yeah! :)
FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
         sockets *likely* work, ptys definitely don't.
OpenBSD: reports indicate that it likely doesn't work
         (similar problems as on FreeBSD).
OS X:    completely, utterly broken on at least <= 10.6.

EOF

my $can_kqueue = -e "/usr/include/sys/event.h";
$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Similarly to the kqueue backend above, EV can take advantage of the
solaris 10 event port interface. Support for event ports will be detected
at runtime, with a safe fallback to other methods when it cannot be used.

EOF

$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (-e "/usr/include/sys/port.h") ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


EV needs the functions pthread_atfork and clock_gettime. On most systems
you need some special libraries for this (such as -lrt and -lpthread). You
can specify additional libraries to provide these calls (and any other
required by EV) now, or accept the default.

On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
to avoid the dependency on libpthread, and directly uses the clock_gettime
syscall to avoid a dependency on librt.

EOF

my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;


print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


A backend of a different kind is the Linux inotify(7) interface, which can
be used to speed up (and reduce resource consumption) of stat watchers. If
you have the include file and libc support for it, it is usually a good
idea to enable it, as kernel availability is detected at runtime.

EOF

my $can_inotify = -e "/usr/include/sys/inotify.h";
$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Another useful bit of functionality is the Linux eventfd, which is useful
for faster signal handling (don't care) and intra-thread communications
(more relevant). Kernel support for this will be probed at runtime, but
your libc must contain the necessary wrapper. Glibc 2.7 and later should
have this wrapper.

EOF

my $can_eventfd = -e "/usr/include/sys/eventfd.h";
$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Another sometimes useful bit of functionality is the Linux signalfd, which
is useful for faster signal handling (don't care). Kernel support for
this will be probed at runtime, but your libc must contain the necessary
wrapper. Glibc 2.7 and later should have this wrapper.

EOF

my $can_signalfd = -e "/usr/include/sys/signalfd.h";
$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Very rarely, people want to tweak EV even more, e.g. to exclude
or include certain watcher types or backends. This can be done by adding
extra -D options here, or via the EV_EXTRA_DEFS environment variable.

For example, if you run into compile problems because of missing memory
fences (or you just want extra performance), you can tell EV to not support
smp and threads via -DEV_NO_THREADS.

Normal persons just press enter.

EOF

$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


EOF

my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();

WriteMakefile(
    dist        => {
                    PREOP       => 'pod2text EV.pm | tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
                    COMPRESS    => 'gzip -9v',
                    SUFFIX      => '.gz',
                   },
    depend => {
       "EV.c" => "EV/EVAPI.h "
               . "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "
               . "libev/ev_vars.h libev/ev_wrap.h",
    },
    INC       => "-Ilibev",
    DEFINE    => "$DEFINE",
    NAME => "EV",
    LIBS => [$LIBS],
    PREREQ_PM => {
       @anyevent,
       "common::sense" => 0,
    },
    VERSION_FROM => "EV.pm",
    PM           => {
                    'EV.pm'             => '$(INST_LIBDIR)/EV.pm',
                    'EV/EVAPI.h'        => '$(INST_LIBDIR)/EV/EVAPI.h',
                    'EV/MakeMaker.pm'   => '$(INST_LIBDIR)/EV/MakeMaker.pm',
                    'libev/ev.h'        => '$(INST_LIBDIR)/EV/ev.h',
                    'libev/ev.pod'      => '$(INST_LIBDIR)/EV/libev.pod',
                 },
    MAN3PODS => {
                    'EV.pm'           => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
                    'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
                    'libev/ev.pod'    => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
                },
);


Revision:	1.53
Committed:	Tue Jan 15 21:49:38 2013 UTC (11 years, 3 months ago) by root
Content type:	text/plain
Branch:	MAIN
CVS Tags:	EV-rel-4_15
Changes since 1.52:	+7 -3 lines
Log Message:	atfork, gettime
#	User	Rev	Content
1	root	1.43	use 5.008002;
2	root	1.4
3	root	1.37	use strict qw(vars subs);
4	root	1.7	use Config;
5	root	1.1	use ExtUtils::MakeMaker;
6
7	root	1.10	unless (-e "libev/ev_epoll.c") {
8			print <<EOF;
9
10			***
11			*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,
12			*** you also have to check-out the "libev" module from the same CVS
13			*** repository into the EV dir (i.e. EV/libev from outside).
14			***
15
16			EOF
17			exit 1;
18			}
19
20	root	1.11	print <<EOF;
21
22	root	1.22	* * * * * * * * * * * * * * * * * *
23	root	1.11
24
25			Welcome to EV configuration. If you are in a hurry, just press return here
26			and hope for the best. The defaults should usually do.
27
28			EOF
29
30			if (prompt ("Skip further questions and use defaults (y/n)?", "y") =~ /[yY]/) {
31			$ENV{PERL_MM_USE_DEFAULT} = 1;
32			}
33
34			print <<EOF;
35
36	root	1.22	* * * * * * * * * * * * * * * * * *
37	root	1.11
38
39	root	1.14	POSIX optionally offers support for a monotonic clock source. EV
40	root	1.45	can take advantage of this clock source to detect time jumps more
41	root	1.14	reliably. Unfortunately, some systems are bound to be broken, so you can
42			disable this here: you can completely disable the detection and use of
43			the monotonic clock by answering 'n' here. Support for this clock type
44	root	1.29	will otherwise be autodetected at both compile- and runtime. (this setting
45			currently affects the use of nanosleep over select as well).
46	root	1.11
47			EOF
48
49	root	1.37	my $DEFINE .= " -DEV_USE_MONOTONIC=" . (0 + (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/));
50	root	1.11
51			print <<EOF;
52
53	root	1.22	* * * * * * * * * * * * * * * * * *
54	root	1.11
55
56			POSIX optionally offers support for a (potentially) high-resolution
57			realtime clock interface. In a good implementation, using it is faster
58			than the normal method of using gettimeofday. Unfortunately, this option
59	root	1.39	is also bound to be broken on some systems, and current EV versions do not
60	root	1.45	actually call gettimeofday very often, so it defaults to no.
61	root	1.11
62			EOF
63
64	root	1.39	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));
65	root	1.11
66			print <<EOF;
67
68	root	1.22	* * * * * * * * * * * * * * * * * *
69	root	1.11
70
71	root	1.46	EV can use various backends with various portability issues. The select
72	root	1.19	backend is the most portable and makes for a good fallback, but it can be
73	root	1.22	limited to a low number of file descriptors and/or might not compile. If
74			you have problems with compiling ev_select.c, you might try to play around
75	root	1.19	with disabling it here, or forcing it to use the fd_set provided by your
76			OS, via the next question. I highly recommend keeping it in.
77
78			EOF
79
80			if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
81	root	1.22	$DEFINE .= " -DEV_USE_SELECT=1";
82	root	1.19
83			print <<EOF;
84
85	root	1.22	* * * * * * * * * * * * * * * * * *
86	root	1.19
87
88			The select backend can operate in two modes. One uses the system-provided
89			fd_set and is usually limited to 1024 file descriptors (64 on windows),
90			the other requires your header files to define NFDBITS and declare a
91			suitable fd_mask type. If you run into problems compiling ev_select.c, you
92			can try forcing the use of the system fd_set here.
93
94			EOF
95
96			if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
97			$DEFINE .= " -DEV_SELECT_USE_FD_SET";
98			}
99	root	1.22	} else {
100			$DEFINE .= " -DEV_USE_SELECT=0";
101	root	1.19	}
102
103			print <<EOF;
104
105	root	1.22	* * * * * * * * * * * * * * * * * *
106	root	1.19
107
108			The second very portable backend is poll(2). It does not exist on windows
109			and various versions of Mac OS X (and on the other versions it simply
110			doesn't work), but works basically everywhere else. It is recommended to use
111			the default here unless you run into compile problems in ev_poll.c.
112
113			EOF
114
115	root	1.22	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (-e "/usr/include/poll.h") ? "y" : "n") =~ /[yY]/));
116	root	1.19
117			print <<EOF;
118
119	root	1.22	* * * * * * * * * * * * * * * * * *
120	root	1.19
121
122	root	1.24	Select and poll make it hard to write efficient servers, especially if the
123			number of active connections is much lower than the watched ones. GNU/Linux
124			systems have a more scalable method called "epoll", which EV can use. For
125			this to work, both your kernel and glibc have to support epoll, but if you
126			can compile it, the detection will be done at runtime, and EV will safely
127			fall back to using select when epoll isn't available. If unsure, accept
128			the default.
129	root	1.11
130			EOF
131
132	root	1.37	my $can_epoll = -e "/usr/include/sys/epoll.h";
133			$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
134			$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));
135	root	1.15
136			print <<EOF;
137
138	root	1.22	* * * * * * * * * * * * * * * * * *
139	root	1.15
140
141	root	1.23	Similarly to the epoll backend above, EV can take advantage of kqueue on
142			many BSD systems. Support for kqueue will be detected at runtime, with a
143			safe fallback to other methods when it cannot be used.
144
145	root	1.31	Note that kqueue is broken on most operating systems, so by default it
146			won't be used on many platforms, but you can still create your own event
147	root	1.40	loop with kqueue backend if you ask specifically for it.
148	root	1.31
149			Here is what we know:
150	root	1.23
151	root	1.45	NetBSD: partially working in at least 3.1 and later. Yeah! :)
152			FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
153	root	1.28	sockets likely work, ptys definitely don't.
154	root	1.23	OpenBSD: reports indicate that it likely doesn't work
155			(similar problems as on FreeBSD).
156	root	1.45	OS X: completely, utterly broken on at least <= 10.6.
157	root	1.11
158	root	1.15	EOF
159
160	root	1.28	my $can_kqueue = -e "/usr/include/sys/event.h";
161	root	1.37	$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
162	root	1.23	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));
163	root	1.11
164			print <<EOF;
165
166	root	1.22	* * * * * * * * * * * * * * * * * *
167	root	1.11
168
169	root	1.21	Similarly to the kqueue backend above, EV can take advantage of the
170	root	1.26	solaris 10 event port interface. Support for event ports will be detected
171			at runtime, with a safe fallback to other methods when it cannot be used.
172	root	1.21
173			EOF
174
175	root	1.26	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (-e "/usr/include/sys/port.h") ? "y" : "n") =~ /[yY]/));
176	root	1.21
177			print <<EOF;
178
179	root	1.22	* * * * * * * * * * * * * * * * * *
180	root	1.21
181
182	root	1.11	EV needs the functions pthread_atfork and clock_gettime. On most systems
183	root	1.15	you need some special libraries for this (such as -lrt and -lpthread). You
184	root	1.23	can specify additional libraries to provide these calls (and any other
185			required by EV) now, or accept the default.
186	root	1.11
187	root	1.53	On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
188			to avoid the dependency on libpthread, and directly uses the clock_gettime
189			syscall to avoid a dependency on librt.
190
191	root	1.11	EOF
192
193	root	1.38	my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
194	root	1.53	my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
195			my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
196			$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;
197	root	1.15
198	root	1.11
199			print <<EOF;
200
201	root	1.22	* * * * * * * * * * * * * * * * * *
202	root	1.11
203
204	root	1.25	A backend of a different kind is the Linux inotify(7) interface, which can
205			be used to speed up (and reduce resource consumption) of stat watchers. If
206	root	1.40	you have the include file and libc support for it, it is usually a good
207			idea to enable it, as kernel availability is detected at runtime.
208	root	1.25
209			EOF
210
211			my $can_inotify = -e "/usr/include/sys/inotify.h";
212	root	1.37	$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
213	root	1.25	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));
214
215			print <<EOF;
216
217			* * * * * * * * * * * * * * * * * *
218
219
220	root	1.36	Another useful bit of functionality is the Linux eventfd, which is useful
221			for faster signal handling (don't care) and intra-thread communications
222			(more relevant). Kernel support for this will be probed at runtime, but
223			your libc must contain the necessary wrapper. Glibc 2.7 and later should
224			have this wrapper.
225
226			EOF
227
228	root	1.37	my $can_eventfd = -e "/usr/include/sys/eventfd.h";
229			$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
230			$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));
231	root	1.36
232			print <<EOF;
233
234			* * * * * * * * * * * * * * * * * *
235
236
237	root	1.42	Another sometimes useful bit of functionality is the Linux signalfd, which
238			is useful for faster signal handling (don't care). Kernel support for
239			this will be probed at runtime, but your libc must contain the necessary
240	root	1.44	wrapper. Glibc 2.7 and later should have this wrapper.
241	root	1.42
242			EOF
243
244			my $can_signalfd = -e "/usr/include/sys/signalfd.h";
245			$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
246			$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));
247
248			print <<EOF;
249
250			* * * * * * * * * * * * * * * * * *
251
252
253	root	1.48	Very rarely, people want to tweak EV even more, e.g. to exclude
254	root	1.52	or include certain watcher types or backends. This can be done by adding
255	root	1.48	extra -D options here, or via the EV_EXTRA_DEFS environment variable.
256	root	1.52
257			For example, if you run into compile problems because of missing memory
258			fences (or you just want extra performance), you can tell EV to not support
259			smp and threads via -DEV_NO_THREADS.
260
261	root	1.48	Normal persons just press enter.
262
263			EOF
264
265	root	1.49	$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";
266	root	1.48
267			print <<EOF;
268
269			* * * * * * * * * * * * * * * * * *
270
271
272	root	1.11	EOF
273
274	root	1.47	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();
275	root	1.20
276	root	1.1	WriteMakefile(
277			dist => {
278	root	1.2	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
279	root	1.1	COMPRESS => 'gzip -9v',
280			SUFFIX => '.gz',
281			},
282	root	1.10	depend => {
283	root	1.13	"EV.c" => "EV/EVAPI.h "
284	root	1.17	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "
285	root	1.30	. "libev/ev_vars.h libev/ev_wrap.h",
286	root	1.10	},
287	root	1.8	INC => "-Ilibev",
288	root	1.11	DEFINE => "$DEFINE",
289	root	1.2	NAME => "EV",
290	root	1.11	LIBS => [$LIBS],
291	root	1.20	PREREQ_PM => {
292			@anyevent,
293	root	1.41	"common::sense" => 0,
294	root	1.20	},
295	root	1.2	VERSION_FROM => "EV.pm",
296	root	1.5	PM => {
297			'EV.pm' => '$(INST_LIBDIR)/EV.pm',
298			'EV/EVAPI.h' => '$(INST_LIBDIR)/EV/EVAPI.h',
299			'EV/MakeMaker.pm' => '$(INST_LIBDIR)/EV/MakeMaker.pm',
300	root	1.8	'libev/ev.h' => '$(INST_LIBDIR)/EV/ev.h',
301	root	1.35	'libev/ev.pod' => '$(INST_LIBDIR)/EV/libev.pod',
302	root	1.5	},
303	root	1.34	MAN3PODS => {
304			'EV.pm' => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
305			'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
306	root	1.35	'libev/ev.pod' => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
307	root	1.34	},
308	root	1.1	);
309
310	root	1.6