EV/Makefile.PL

use strict qw(vars subs);
use Canary::Stability EV => 1, 5.008002;
use Config;
use ExtUtils::MakeMaker;

sub have_inc($) {
   scalar grep -r "$_/$_[0]", $Config{usrinc}, split / /, $Config{incpth}
}

my $DEFINE;

unless (-e "libev/ev_epoll.c") {
   print <<EOF;

***
*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,
*** you also have to check-out the "libev" module from the same CVS
*** repository into the EV dir (i.e. EV/libev from outside).
***

EOF
   exit 1;
}

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Welcome to EV configuration. If you are in a hurry, just press return here
and hope for the best. The defaults should usually do.

EOF

if (prompt ("Skip further questions and use defaults (y/n)?", "y") =~ /[yY]/) {
   $ENV{PERL_MM_USE_DEFAULT} = 1;
}

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


POSIX optionally offers support for a monotonic clock source. EV
can take advantage of this clock source to detect time jumps more
reliably. Unfortunately, some systems are bound to be broken, so you can
disable this here: you can completely disable the detection and use of
the monotonic clock by answering 'n' here. Support for this clock type
will otherwise be autodetected at both compile- and runtime. (this setting
currently affects the use of nanosleep over select as well).

EOF

unless (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {
   $DEFINE .= " -DEV_USE_MONOTONIC=0";
}

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


POSIX optionally offers support for a (potentially) high-resolution
realtime clock interface. In a good implementation, using it is faster
than the normal method of using gettimeofday. Unfortunately, this option
is also bound to be broken on some systems, and current EV versions do not
actually call gettimeofday very often, so it defaults to no.

EOF

$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


EV can use various backends with various portability issues. The select
backend is the most portable and makes for a good fallback, but it can be
limited to a low number of file descriptors and/or might not compile. If
you have problems with compiling ev_select.c, you might try to play around
with disabling it here, or forcing it to use the fd_set provided by your
OS, via the next question. I highly recommend keeping it in.

EOF

if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
   $DEFINE .= " -DEV_USE_SELECT=1";

   print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


The select backend can operate in two modes. One uses the system-provided
fd_set and is usually limited to 1024 file descriptors (64 on windows),
the other requires your header files to define NFDBITS and declare a
suitable fd_mask type. If you run into problems compiling ev_select.c, you
can try forcing the use of the system fd_set here.

EOF

   if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
      $DEFINE .= " -DEV_SELECT_USE_FD_SET";
   }
} else {
   $DEFINE .= " -DEV_USE_SELECT=0";
}

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


The second very portable backend is poll(2). It does not exist on windows
and various versions of Mac OS X (and on the other versions it simply
doesn't work), but works basically everywhere else. It is recommended to use
the default here unless you run into compile problems in ev_poll.c.

EOF

$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (have_inc "poll.h") ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Select and poll make it hard to write efficient servers, especially if the
number of active connections is much lower than the watched ones. GNU/Linux
systems have a more scalable method called "epoll", which EV can use. For
this to work, both your kernel and glibc have to support epoll, but if you
can compile it, the detection will be done at runtime, and EV will safely
fall back to using select when epoll isn't available. If unsure, accept
the default.

EOF

my $can_epoll = have_inc "sys/epoll.h";
$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Linux 4.18 introduced another event polling interface, this time using
the Linux AIO API. While this API is far superior to epoll and almost
rivals kqueue, it also suffers from the same issues as kqueue typically
does: only a subset of file types are supported (as of 4.19, I have seen
eventfd, pipes, sockets files and some devices, but no ttys). It also
is subject arbitrary system-wide limits imposed on it. Therefore, this
backend is not used by default, even when it is compiled in, and you have
to request it explicitly, e.g. with LIBEV_FLAGS=64. If unsure, accept the
default.

EOF

my $can_linuxaio = have_inc "linux/aio_abi.h";
$can_linuxaio or die;
$can_linuxaio = $ENV{EV_LINUXAIO} if exists $ENV{EV_LINUXAIO};
$DEFINE .= " -DEV_USE_LINUXAIO=" . (0 + (prompt ("Enable linux aio backend (y/n)?", $can_linuxaio ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Similarly to the epoll backend above, EV can take advantage of kqueue on
many BSD systems. Support for kqueue will be detected at runtime, with a
safe fallback to other methods when it cannot be used.

Note that kqueue is broken on most operating systems, so by default it
won't be used on many platforms, but you can still create your own event
loop with kqueue backend if you ask specifically for it.

Here is what we know:

NetBSD:  partially working in at least 3.1 and later. Yeah! :)
FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
         sockets *likely* work, ptys definitely don't.
OpenBSD: reports indicate that it likely doesn't work
         (similar problems as on FreeBSD).
OS X:    completely, utterly broken on at least <= 10.6.

EOF

my $can_kqueue = have_inc "sys/event.h";
$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Similarly to the kqueue backend above, EV can take advantage of the
solaris 10 event port interface. Support for event ports will be detected
at runtime, with a safe fallback to other methods when it cannot be used.

EOF

$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (have_inc "sys/port.h") ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


EV needs the functions pthread_atfork and clock_gettime. On most systems
you need some special libraries for this (such as -lrt and -lpthread). You
can specify additional libraries to provide these calls (and any other
required by EV) now, or accept the default.

On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
to avoid the dependency on libpthread, and directly uses the clock_gettime
syscall to avoid a dependency on librt.

EOF

my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;


print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


A backend of a different kind is the Linux inotify(7) interface, which can
be used to speed up (and reduce resource consumption) of stat watchers. If
you have the include file and libc support for it, it is usually a good
idea to enable it, as kernel availability is detected at runtime.

EOF

my $can_inotify = have_inc "sys/inotify.h";
$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Another useful bit of functionality is the Linux eventfd, which is useful
for faster signal handling (don't care) and intra-thread communications
(more relevant). Kernel support for this will be probed at runtime, but
your libc must contain the necessary wrapper. Glibc 2.7 and later should
have this wrapper.

EOF

my $can_eventfd = have_inc "sys/eventfd.h";
$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Another sometimes useful bit of functionality is the Linux signalfd, which
is useful for faster signal handling (don't care). Kernel support for
this will be probed at runtime, but your libc must contain the necessary
wrapper. Glibc 2.7 and later should have this wrapper.

EOF

my $can_signalfd = have_inc "sys/signalfd.h";
$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Very rarely, people want to tweak EV even more, e.g. to exclude
or include certain watcher types or backends. This can be done by adding
extra -D options here, or via the EV_EXTRA_DEFS environment variable.

For example, if you run into compile problems because of missing memory
fences (or you just want extra performance), you can tell EV to not support
smp and threads via -DEV_NO_THREADS.

Normal persons just press enter.

EOF

$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


EOF

my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();

WriteMakefile(
    dist        => {
                    PREOP       => 'pod2text EV.pm | tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
                    COMPRESS    => 'gzip -9v',
                    SUFFIX      => '.gz',
                   },
    depend => {
       "EV.c" => "EV/EVAPI.h "
               . "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "
               . "libev/ev_vars.h libev/ev_wrap.h",
    },
    INC       => "-Ilibev",
    DEFINE    => "$DEFINE",
    NAME => "EV",
    LIBS => [$LIBS],
    PREREQ_PM => {
       @anyevent,
       "common::sense" => 0,
    },
    CONFIGURE_REQUIRES => { "ExtUtils::MakeMaker" => 6.52, "Canary::Stability" => 0 },
    VERSION_FROM => "EV.pm",
    PM           => {
                    'EV.pm'             => '$(INST_LIB)/EV.pm',
                    'EV/EVAPI.h'        => '$(INST_LIB)/EV/EVAPI.h',
                    'EV/MakeMaker.pm'   => '$(INST_LIB)/EV/MakeMaker.pm',
                    'libev/ev.h'        => '$(INST_LIB)/EV/ev.h',
                    'libev/ev.pod'      => '$(INST_LIB)/EV/libev.pod',
                 },
    MAN3PODS => {
                    'EV.pm'           => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
                    'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
                    'libev/ev.pod'    => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
                },
);


Revision:	1.58
Committed:	Sat Jun 22 15:50:36 2019 UTC (4 years, 10 months ago) by root
Content type:	text/plain
Branch:	MAIN
Changes since 1.57:	+22 -0 lines
Log Message:	* empty log message *
#	User	Rev	Content
1	root	1.37	use strict qw(vars subs);
2	root	1.57	use Canary::Stability EV => 1, 5.008002;
3	root	1.7	use Config;
4	root	1.1	use ExtUtils::MakeMaker;
5
6	root	1.55	sub have_inc($) {
7			scalar grep -r "$_/$_[0]", $Config{usrinc}, split / /, $Config{incpth}
8			}
9
10	root	1.56	my $DEFINE;
11
12	root	1.10	unless (-e "libev/ev_epoll.c") {
13			print <<EOF;
14
15			***
16			*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,
17			*** you also have to check-out the "libev" module from the same CVS
18			*** repository into the EV dir (i.e. EV/libev from outside).
19			***
20
21			EOF
22			exit 1;
23			}
24
25	root	1.11	print <<EOF;
26
27	root	1.22	* * * * * * * * * * * * * * * * * *
28	root	1.11
29
30			Welcome to EV configuration. If you are in a hurry, just press return here
31			and hope for the best. The defaults should usually do.
32
33			EOF
34
35			if (prompt ("Skip further questions and use defaults (y/n)?", "y") =~ /[yY]/) {
36			$ENV{PERL_MM_USE_DEFAULT} = 1;
37			}
38
39			print <<EOF;
40
41	root	1.22	* * * * * * * * * * * * * * * * * *
42	root	1.11
43
44	root	1.14	POSIX optionally offers support for a monotonic clock source. EV
45	root	1.45	can take advantage of this clock source to detect time jumps more
46	root	1.14	reliably. Unfortunately, some systems are bound to be broken, so you can
47			disable this here: you can completely disable the detection and use of
48			the monotonic clock by answering 'n' here. Support for this clock type
49	root	1.29	will otherwise be autodetected at both compile- and runtime. (this setting
50			currently affects the use of nanosleep over select as well).
51	root	1.11
52			EOF
53
54	root	1.56	unless (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {
55			$DEFINE .= " -DEV_USE_MONOTONIC=0";
56			}
57	root	1.11
58			print <<EOF;
59
60	root	1.22	* * * * * * * * * * * * * * * * * *
61	root	1.11
62
63			POSIX optionally offers support for a (potentially) high-resolution
64			realtime clock interface. In a good implementation, using it is faster
65			than the normal method of using gettimeofday. Unfortunately, this option
66	root	1.39	is also bound to be broken on some systems, and current EV versions do not
67	root	1.45	actually call gettimeofday very often, so it defaults to no.
68	root	1.11
69			EOF
70
71	root	1.39	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));
72	root	1.11
73			print <<EOF;
74
75	root	1.22	* * * * * * * * * * * * * * * * * *
76	root	1.11
77
78	root	1.46	EV can use various backends with various portability issues. The select
79	root	1.19	backend is the most portable and makes for a good fallback, but it can be
80	root	1.22	limited to a low number of file descriptors and/or might not compile. If
81			you have problems with compiling ev_select.c, you might try to play around
82	root	1.19	with disabling it here, or forcing it to use the fd_set provided by your
83			OS, via the next question. I highly recommend keeping it in.
84
85			EOF
86
87			if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
88	root	1.22	$DEFINE .= " -DEV_USE_SELECT=1";
89	root	1.19
90			print <<EOF;
91
92	root	1.22	* * * * * * * * * * * * * * * * * *
93	root	1.19
94
95			The select backend can operate in two modes. One uses the system-provided
96			fd_set and is usually limited to 1024 file descriptors (64 on windows),
97			the other requires your header files to define NFDBITS and declare a
98			suitable fd_mask type. If you run into problems compiling ev_select.c, you
99			can try forcing the use of the system fd_set here.
100
101			EOF
102
103			if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
104			$DEFINE .= " -DEV_SELECT_USE_FD_SET";
105	root	1.55	}
106	root	1.22	} else {
107			$DEFINE .= " -DEV_USE_SELECT=0";
108	root	1.55	}
109	root	1.19
110			print <<EOF;
111
112	root	1.22	* * * * * * * * * * * * * * * * * *
113	root	1.19
114
115			The second very portable backend is poll(2). It does not exist on windows
116			and various versions of Mac OS X (and on the other versions it simply
117			doesn't work), but works basically everywhere else. It is recommended to use
118			the default here unless you run into compile problems in ev_poll.c.
119
120			EOF
121
122	root	1.55	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (have_inc "poll.h") ? "y" : "n") =~ /[yY]/));
123	root	1.19
124			print <<EOF;
125
126	root	1.22	* * * * * * * * * * * * * * * * * *
127	root	1.19
128
129	root	1.24	Select and poll make it hard to write efficient servers, especially if the
130			number of active connections is much lower than the watched ones. GNU/Linux
131			systems have a more scalable method called "epoll", which EV can use. For
132			this to work, both your kernel and glibc have to support epoll, but if you
133			can compile it, the detection will be done at runtime, and EV will safely
134			fall back to using select when epoll isn't available. If unsure, accept
135			the default.
136	root	1.11
137			EOF
138
139	root	1.55	my $can_epoll = have_inc "sys/epoll.h";
140	root	1.37	$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
141			$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));
142	root	1.15
143			print <<EOF;
144
145	root	1.22	* * * * * * * * * * * * * * * * * *
146	root	1.15
147
148	root	1.58	Linux 4.18 introduced another event polling interface, this time using
149			the Linux AIO API. While this API is far superior to epoll and almost
150			rivals kqueue, it also suffers from the same issues as kqueue typically
151			does: only a subset of file types are supported (as of 4.19, I have seen
152			eventfd, pipes, sockets files and some devices, but no ttys). It also
153			is subject arbitrary system-wide limits imposed on it. Therefore, this
154			backend is not used by default, even when it is compiled in, and you have
155			to request it explicitly, e.g. with LIBEV_FLAGS=64. If unsure, accept the
156			default.
157
158			EOF
159
160			my $can_linuxaio = have_inc "linux/aio_abi.h";
161			$can_linuxaio or die;
162			$can_linuxaio = $ENV{EV_LINUXAIO} if exists $ENV{EV_LINUXAIO};
163			$DEFINE .= " -DEV_USE_LINUXAIO=" . (0 + (prompt ("Enable linux aio backend (y/n)?", $can_linuxaio ? "y" : "n") =~ /[yY]/));
164
165			print <<EOF;
166
167			* * * * * * * * * * * * * * * * * *
168
169
170	root	1.23	Similarly to the epoll backend above, EV can take advantage of kqueue on
171			many BSD systems. Support for kqueue will be detected at runtime, with a
172			safe fallback to other methods when it cannot be used.
173
174	root	1.31	Note that kqueue is broken on most operating systems, so by default it
175			won't be used on many platforms, but you can still create your own event
176	root	1.40	loop with kqueue backend if you ask specifically for it.
177	root	1.31
178			Here is what we know:
179	root	1.23
180	root	1.45	NetBSD: partially working in at least 3.1 and later. Yeah! :)
181			FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
182	root	1.28	sockets likely work, ptys definitely don't.
183	root	1.23	OpenBSD: reports indicate that it likely doesn't work
184			(similar problems as on FreeBSD).
185	root	1.45	OS X: completely, utterly broken on at least <= 10.6.
186	root	1.11
187	root	1.15	EOF
188
189	root	1.55	my $can_kqueue = have_inc "sys/event.h";
190	root	1.37	$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
191	root	1.23	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));
192	root	1.11
193			print <<EOF;
194
195	root	1.22	* * * * * * * * * * * * * * * * * *
196	root	1.11
197
198	root	1.21	Similarly to the kqueue backend above, EV can take advantage of the
199	root	1.26	solaris 10 event port interface. Support for event ports will be detected
200			at runtime, with a safe fallback to other methods when it cannot be used.
201	root	1.21
202			EOF
203
204	root	1.55	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (have_inc "sys/port.h") ? "y" : "n") =~ /[yY]/));
205	root	1.21
206			print <<EOF;
207
208	root	1.22	* * * * * * * * * * * * * * * * * *
209	root	1.21
210
211	root	1.11	EV needs the functions pthread_atfork and clock_gettime. On most systems
212	root	1.15	you need some special libraries for this (such as -lrt and -lpthread). You
213	root	1.23	can specify additional libraries to provide these calls (and any other
214			required by EV) now, or accept the default.
215	root	1.11
216	root	1.53	On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
217			to avoid the dependency on libpthread, and directly uses the clock_gettime
218			syscall to avoid a dependency on librt.
219
220	root	1.11	EOF
221
222	root	1.38	my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
223	root	1.53	my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
224			my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
225			$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;
226	root	1.15
227	root	1.11
228			print <<EOF;
229
230	root	1.22	* * * * * * * * * * * * * * * * * *
231	root	1.11
232
233	root	1.25	A backend of a different kind is the Linux inotify(7) interface, which can
234			be used to speed up (and reduce resource consumption) of stat watchers. If
235	root	1.40	you have the include file and libc support for it, it is usually a good
236			idea to enable it, as kernel availability is detected at runtime.
237	root	1.25
238			EOF
239
240	root	1.55	my $can_inotify = have_inc "sys/inotify.h";
241	root	1.37	$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
242	root	1.25	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));
243
244			print <<EOF;
245
246			* * * * * * * * * * * * * * * * * *
247
248
249	root	1.36	Another useful bit of functionality is the Linux eventfd, which is useful
250			for faster signal handling (don't care) and intra-thread communications
251			(more relevant). Kernel support for this will be probed at runtime, but
252			your libc must contain the necessary wrapper. Glibc 2.7 and later should
253			have this wrapper.
254
255			EOF
256
257	root	1.55	my $can_eventfd = have_inc "sys/eventfd.h";
258	root	1.37	$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
259			$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));
260	root	1.36
261			print <<EOF;
262
263			* * * * * * * * * * * * * * * * * *
264
265
266	root	1.42	Another sometimes useful bit of functionality is the Linux signalfd, which
267			is useful for faster signal handling (don't care). Kernel support for
268			this will be probed at runtime, but your libc must contain the necessary
269	root	1.44	wrapper. Glibc 2.7 and later should have this wrapper.
270	root	1.42
271			EOF
272
273	root	1.55	my $can_signalfd = have_inc "sys/signalfd.h";
274	root	1.42	$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
275			$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));
276
277			print <<EOF;
278
279			* * * * * * * * * * * * * * * * * *
280
281
282	root	1.48	Very rarely, people want to tweak EV even more, e.g. to exclude
283	root	1.52	or include certain watcher types or backends. This can be done by adding
284	root	1.48	extra -D options here, or via the EV_EXTRA_DEFS environment variable.
285	root	1.52
286			For example, if you run into compile problems because of missing memory
287			fences (or you just want extra performance), you can tell EV to not support
288			smp and threads via -DEV_NO_THREADS.
289
290	root	1.48	Normal persons just press enter.
291
292			EOF
293
294	root	1.49	$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";
295	root	1.48
296			print <<EOF;
297
298			* * * * * * * * * * * * * * * * * *
299
300
301	root	1.11	EOF
302
303	root	1.47	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();
304	root	1.20
305	root	1.1	WriteMakefile(
306			dist => {
307	root	1.2	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
308	root	1.1	COMPRESS => 'gzip -9v',
309			SUFFIX => '.gz',
310			},
311	root	1.10	depend => {
312	root	1.13	"EV.c" => "EV/EVAPI.h "
313	root	1.17	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "
314	root	1.30	. "libev/ev_vars.h libev/ev_wrap.h",
315	root	1.10	},
316	root	1.8	INC => "-Ilibev",
317	root	1.11	DEFINE => "$DEFINE",
318	root	1.2	NAME => "EV",
319	root	1.11	LIBS => [$LIBS],
320	root	1.20	PREREQ_PM => {
321			@anyevent,
322	root	1.41	"common::sense" => 0,
323	root	1.20	},
324	root	1.57	CONFIGURE_REQUIRES => { "ExtUtils::MakeMaker" => 6.52, "Canary::Stability" => 0 },
325	root	1.2	VERSION_FROM => "EV.pm",
326	root	1.5	PM => {
327	root	1.54	'EV.pm' => '$(INST_LIB)/EV.pm',
328			'EV/EVAPI.h' => '$(INST_LIB)/EV/EVAPI.h',
329			'EV/MakeMaker.pm' => '$(INST_LIB)/EV/MakeMaker.pm',
330			'libev/ev.h' => '$(INST_LIB)/EV/ev.h',
331			'libev/ev.pod' => '$(INST_LIB)/EV/libev.pod',
332	root	1.5	},
333	root	1.34	MAN3PODS => {
334			'EV.pm' => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
335			'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
336	root	1.35	'libev/ev.pod' => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
337	root	1.34	},
338	root	1.1	);
339
340	root	1.6