EV/Makefile.PL

use strict qw(vars subs);
use Canary::Stability EV => 1, 5.008002;
use Config;
use ExtUtils::MakeMaker;

sub have_inc($) {
   scalar grep -r "$_/$_[0]", $Config{usrinc}, split / /, $Config{incpth}
}

my $DEFINE;

unless (-e "libev/ev_linuxaio.c") {
   print <<EOF;

***
*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,
*** you also have to check-out the "libev" module from the same CVS
*** repository into the EV dir (i.e. EV/libev from outside).
***

EOF
   exit 1;
}

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Welcome to EV configuration. If you are in a hurry, just press return here
and hope for the best. The defaults should usually do.

EOF

if (prompt ("Skip further questions and use defaults (y/n)?", "y") =~ /[yY]/) {
   $ENV{PERL_MM_USE_DEFAULT} = 1;
}

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


POSIX optionally offers support for a monotonic clock source. EV
can take advantage of this clock source to detect time jumps more
reliably. Unfortunately, some systems are bound to be broken, so you can
disable this here: you can completely disable the detection and use of
the monotonic clock by answering 'n' here. Support for this clock type
will otherwise be autodetected at both compile- and runtime. (this setting
currently affects the use of nanosleep over select as well).

EOF

unless (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {
   $DEFINE .= " -DEV_USE_MONOTONIC=0";
}

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


POSIX optionally offers support for a (potentially) high-resolution
realtime clock interface. In a good implementation, using it is faster
than the normal method of using gettimeofday. Unfortunately, this option
is also bound to be broken on some systems, and current EV versions do not
actually call gettimeofday very often, so it defaults to no.

EOF

$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


EV can use various backends with various portability issues. The select
backend is the most portable and makes for a good fallback, but it can be
limited to a low number of file descriptors and/or might not compile. If
you have problems with compiling ev_select.c, you might try to play around
with disabling it here, or forcing it to use the fd_set provided by your
OS, via the next question. I highly recommend keeping it in.

EOF

if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
   $DEFINE .= " -DEV_USE_SELECT=1";

   print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


The select backend can operate in two modes. One uses the system-provided
fd_set and is usually limited to 1024 file descriptors (64 on windows),
the other requires your header files to define NFDBITS and declare a
suitable fd_mask type. If you run into problems compiling ev_select.c, you
can try forcing the use of the system fd_set here.

EOF

   if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
      $DEFINE .= " -DEV_SELECT_USE_FD_SET";
   }
} else {
   $DEFINE .= " -DEV_USE_SELECT=0";
}

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


The second very portable backend is poll(2). It does not exist on windows
and various versions of Mac OS X (and on the other versions it simply
doesn't work), but works basically everywhere else. It is recommended to use
the default here unless you run into compile problems in ev_poll.c.

EOF

$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (have_inc "poll.h") ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Select and poll make it hard to write efficient servers, especially if the
number of active connections is much lower than the watched ones. GNU/Linux
systems have a more scalable method called "epoll", which EV can use. For
this to work, both your kernel and glibc have to support epoll, but if you
can compile it, the detection will be done at runtime, and EV will safely
fall back to using select when epoll isn't available. If unsure, accept
the default.

EOF

my $can_epoll = have_inc "sys/epoll.h";
$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Linux 4.18 introduced another event polling interface, this time using
the Linux AIO API. While this API is far superior to epoll and almost
rivals kqueue, it also suffers from the same issues as kqueue typically
does: only a subset of file types are supported (as of 4.19, I have seen
eventfd, pipes, sockets files and some devices, but no ttys). It also
is subject arbitrary system-wide limits imposed on it. Therefore, this
backend is not used by default, even when it is compiled in, and you have
to request it explicitly, e.g. with LIBEV_FLAGS=64. If unsure, accept the
default.

EOF

my $can_linuxaio = have_inc "linux/aio_abi.h";
$can_linuxaio = $ENV{EV_LINUXAIO} if exists $ENV{EV_LINUXAIO};
$can_linuxaio = 0 + (prompt ("Enable linux aio backend (y/n)?", $can_linuxaio ? "y" : "n") =~ /[yY]/);
$DEFINE .= " -DEV_USE_LINUXAIO=$can_linuxaio";

if ($can_linuxaio) {
print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


The previously mentioned Linux AIO backend is experimental and will not
be used unless requested explicitly. You can, howeer, choose to make ti a
recommended basckend, which means it will be chosen if available even when
not explicitly asked for, in preference to epoll on GNU/Linux. This option
is likely temporary. When unsure, accept the default.

EOF

my $recommend_linuxaio = 0;
$recommend_linuxaio = $ENV{EV_RECOMMEND_LINUXAIO} if exists $ENV{EV_RECOMMEND_LINUXAIO};
$recommend_linuxaio = 0 + (prompt ("Treat linux aio as a recommended backend (y/n)?", $recommend_linuxaio ? "y" : "n") =~ /[yY]/);
$DEFINE .= " -DEV_RECOMMEND_LINUXAIO=$recommend_linuxaio";
}

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Similarly to the epoll backend above, EV can take advantage of kqueue on
many BSD systems. Support for kqueue will be detected at runtime, with a
safe fallback to other methods when it cannot be used.

Note that kqueue is broken on most operating systems, so by default it
won't be used on many platforms, but you can still create your own event
loop with kqueue backend if you ask specifically for it.

Here is what we know:

NetBSD:  partially working in at least 3.1 and later. Yeah! :)
FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
         sockets *likely* work, ptys definitely don't.
OpenBSD: reports indicate that it likely doesn't work
         (similar problems as on FreeBSD).
OS X:    completely, utterly broken on at least <= 10.6.

EOF

my $can_kqueue = have_inc "sys/event.h";
$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Similarly to the kqueue backend above, EV can take advantage of the
solaris 10 event port interface. Support for event ports will be detected
at runtime, with a safe fallback to other methods when it cannot be used.

EOF

$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (have_inc "sys/port.h") ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


EV needs the functions pthread_atfork and clock_gettime. On most systems
you need some special libraries for this (such as -lrt and -lpthread). You
can specify additional libraries to provide these calls (and any other
required by EV) now, or accept the default.

On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
to avoid the dependency on libpthread, and directly uses the clock_gettime
syscall to avoid a dependency on librt.

EOF

my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;


print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


A backend of a different kind is the Linux inotify(7) interface, which can
be used to speed up (and reduce resource consumption) of stat watchers. If
you have the include file and libc support for it, it is usually a good
idea to enable it, as kernel availability is detected at runtime.

EOF

my $can_inotify = have_inc "sys/inotify.h";
$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Another useful bit of functionality is the Linux eventfd, which is useful
for faster signal handling (don't care) and intra-thread communications
(more relevant). Kernel support for this will be probed at runtime, but
your libc must contain the necessary wrapper. Glibc 2.7 and later should
have this wrapper.

EOF

my $can_eventfd = have_inc "sys/eventfd.h";
$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Another sometimes useful bit of functionality is the Linux signalfd, which
is useful for faster signal handling (don't care). Kernel support for
this will be probed at runtime, but your libc must contain the necessary
wrapper. Glibc 2.7 and later should have this wrapper.

EOF

my $can_signalfd = have_inc "sys/signalfd.h";
$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Libev contains numerous internal assert() invocations to check for
consistency and user errors. These are normally enabled, but most
perl builds disable this error reporting mechanism by default. You
can re-enable these asserts here. Enabling them might help you catch
programming bugs earlier, but might cause a small slowdown. Also, failures
will be reported by aboritng your program, instead of throwing a perl
exception.

If unsure, enable this if you only use this perl installation for
development, and leave it off for use in production environments.

EOF

my $enable_assertions = 0;
$enable_assertions = 0 + (prompt ("Make sure assertions are enabled? (y/n)?", $enable_assertions ? "y" : "n") =~ /[yY]/);
$DEFINE .= " -DEV_ENABLE_ASERTIONS=1" if $enable_assertions;

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Very rarely, people want to tweak EV even more, e.g. to exclude
or include certain watcher types or backends. This can be done by adding
extra -D options here, or via the EV_EXTRA_DEFS environment variable.

For example, if you run into compile problems because of missing memory
fences (or you just want extra performance), you can tell EV to not support
smp and threads via -DEV_NO_THREADS.

Normal persons just press enter.

EOF

$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";

print <<EOF;

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


EOF

my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();

WriteMakefile(
    dist        => {
                    PREOP       => 'pod2text EV.pm | tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
                    COMPRESS    => 'gzip -9v',
                    SUFFIX      => '.gz',
                   },
    depend => {
       "EV.c" => "EV/EVAPI.h "
               . "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "
               . "libev/ev_vars.h libev/ev_wrap.h",
    },
    INC       => "-Ilibev",
    DEFINE    => "$DEFINE",
    NAME => "EV",
    LIBS => [$LIBS],
    PREREQ_PM => {
       @anyevent,
       "common::sense" => 0,
    },
    CONFIGURE_REQUIRES => { "ExtUtils::MakeMaker" => 6.52, "Canary::Stability" => 0 },
    VERSION_FROM => "EV.pm",
    PM           => {
                    'EV.pm'             => '$(INST_LIB)/EV.pm',
                    'EV/EVAPI.h'        => '$(INST_LIB)/EV/EVAPI.h',
                    'EV/MakeMaker.pm'   => '$(INST_LIB)/EV/MakeMaker.pm',
                    'libev/ev.h'        => '$(INST_LIB)/EV/ev.h',
                    'libev/ev.pod'      => '$(INST_LIB)/EV/libev.pod',
                 },
    MAN3PODS => {
                    'EV.pm'           => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
                    'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
                    'libev/ev.pod'    => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
                },
);


Revision:	1.61
Committed:	Tue Jun 25 23:57:23 2019 UTC (4 years, 10 months ago) by root
Content type:	text/plain
Branch:	MAIN
CVS Tags:	EV-rel-4_27
Changes since 1.60:	+23 -1 lines
Log Message:	* empty log message *
#	User	Rev	Content
1	root	1.37	use strict qw(vars subs);
2	root	1.57	use Canary::Stability EV => 1, 5.008002;
3	root	1.7	use Config;
4	root	1.1	use ExtUtils::MakeMaker;
5
6	root	1.55	sub have_inc($) {
7			scalar grep -r "$_/$_[0]", $Config{usrinc}, split / /, $Config{incpth}
8			}
9
10	root	1.56	my $DEFINE;
11
12	root	1.61	unless (-e "libev/ev_linuxaio.c") {
13	root	1.10	print <<EOF;
14
15			***
16			*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,
17			*** you also have to check-out the "libev" module from the same CVS
18			*** repository into the EV dir (i.e. EV/libev from outside).
19			***
20
21			EOF
22			exit 1;
23			}
24
25	root	1.11	print <<EOF;
26
27	root	1.22	* * * * * * * * * * * * * * * * * *
28	root	1.11
29
30			Welcome to EV configuration. If you are in a hurry, just press return here
31			and hope for the best. The defaults should usually do.
32
33			EOF
34
35			if (prompt ("Skip further questions and use defaults (y/n)?", "y") =~ /[yY]/) {
36			$ENV{PERL_MM_USE_DEFAULT} = 1;
37			}
38
39			print <<EOF;
40
41	root	1.22	* * * * * * * * * * * * * * * * * *
42	root	1.11
43
44	root	1.14	POSIX optionally offers support for a monotonic clock source. EV
45	root	1.45	can take advantage of this clock source to detect time jumps more
46	root	1.14	reliably. Unfortunately, some systems are bound to be broken, so you can
47			disable this here: you can completely disable the detection and use of
48			the monotonic clock by answering 'n' here. Support for this clock type
49	root	1.29	will otherwise be autodetected at both compile- and runtime. (this setting
50			currently affects the use of nanosleep over select as well).
51	root	1.11
52			EOF
53
54	root	1.56	unless (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {
55			$DEFINE .= " -DEV_USE_MONOTONIC=0";
56			}
57	root	1.11
58			print <<EOF;
59
60	root	1.22	* * * * * * * * * * * * * * * * * *
61	root	1.11
62
63			POSIX optionally offers support for a (potentially) high-resolution
64			realtime clock interface. In a good implementation, using it is faster
65			than the normal method of using gettimeofday. Unfortunately, this option
66	root	1.39	is also bound to be broken on some systems, and current EV versions do not
67	root	1.45	actually call gettimeofday very often, so it defaults to no.
68	root	1.11
69			EOF
70
71	root	1.39	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));
72	root	1.11
73			print <<EOF;
74
75	root	1.22	* * * * * * * * * * * * * * * * * *
76	root	1.11
77
78	root	1.46	EV can use various backends with various portability issues. The select
79	root	1.19	backend is the most portable and makes for a good fallback, but it can be
80	root	1.22	limited to a low number of file descriptors and/or might not compile. If
81			you have problems with compiling ev_select.c, you might try to play around
82	root	1.19	with disabling it here, or forcing it to use the fd_set provided by your
83			OS, via the next question. I highly recommend keeping it in.
84
85			EOF
86
87			if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
88	root	1.22	$DEFINE .= " -DEV_USE_SELECT=1";
89	root	1.19
90			print <<EOF;
91
92	root	1.22	* * * * * * * * * * * * * * * * * *
93	root	1.19
94
95			The select backend can operate in two modes. One uses the system-provided
96			fd_set and is usually limited to 1024 file descriptors (64 on windows),
97			the other requires your header files to define NFDBITS and declare a
98			suitable fd_mask type. If you run into problems compiling ev_select.c, you
99			can try forcing the use of the system fd_set here.
100
101			EOF
102
103			if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
104			$DEFINE .= " -DEV_SELECT_USE_FD_SET";
105	root	1.55	}
106	root	1.22	} else {
107			$DEFINE .= " -DEV_USE_SELECT=0";
108	root	1.55	}
109	root	1.19
110			print <<EOF;
111
112	root	1.22	* * * * * * * * * * * * * * * * * *
113	root	1.19
114
115			The second very portable backend is poll(2). It does not exist on windows
116			and various versions of Mac OS X (and on the other versions it simply
117			doesn't work), but works basically everywhere else. It is recommended to use
118			the default here unless you run into compile problems in ev_poll.c.
119
120			EOF
121
122	root	1.55	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (have_inc "poll.h") ? "y" : "n") =~ /[yY]/));
123	root	1.19
124			print <<EOF;
125
126	root	1.22	* * * * * * * * * * * * * * * * * *
127	root	1.19
128
129	root	1.24	Select and poll make it hard to write efficient servers, especially if the
130			number of active connections is much lower than the watched ones. GNU/Linux
131			systems have a more scalable method called "epoll", which EV can use. For
132			this to work, both your kernel and glibc have to support epoll, but if you
133			can compile it, the detection will be done at runtime, and EV will safely
134			fall back to using select when epoll isn't available. If unsure, accept
135			the default.
136	root	1.11
137			EOF
138
139	root	1.55	my $can_epoll = have_inc "sys/epoll.h";
140	root	1.37	$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
141			$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));
142	root	1.15
143			print <<EOF;
144
145	root	1.22	* * * * * * * * * * * * * * * * * *
146	root	1.15
147
148	root	1.58	Linux 4.18 introduced another event polling interface, this time using
149			the Linux AIO API. While this API is far superior to epoll and almost
150			rivals kqueue, it also suffers from the same issues as kqueue typically
151			does: only a subset of file types are supported (as of 4.19, I have seen
152			eventfd, pipes, sockets files and some devices, but no ttys). It also
153			is subject arbitrary system-wide limits imposed on it. Therefore, this
154			backend is not used by default, even when it is compiled in, and you have
155			to request it explicitly, e.g. with LIBEV_FLAGS=64. If unsure, accept the
156			default.
157
158			EOF
159
160			my $can_linuxaio = have_inc "linux/aio_abi.h";
161			$can_linuxaio = $ENV{EV_LINUXAIO} if exists $ENV{EV_LINUXAIO};
162	root	1.60	$can_linuxaio = 0 + (prompt ("Enable linux aio backend (y/n)?", $can_linuxaio ? "y" : "n") =~ /[yY]/);
163			$DEFINE .= " -DEV_USE_LINUXAIO=$can_linuxaio";
164
165			if ($can_linuxaio) {
166			print <<EOF;
167
168			* * * * * * * * * * * * * * * * * *
169
170
171			The previously mentioned Linux AIO backend is experimental and will not
172			be used unless requested explicitly. You can, howeer, choose to make ti a
173			recommended basckend, which means it will be chosen if available even when
174			not explicitly asked for, in preference to epoll on GNU/Linux. This option
175			is likely temporary. When unsure, accept the default.
176
177			EOF
178
179			my $recommend_linuxaio = 0;
180			$recommend_linuxaio = $ENV{EV_RECOMMEND_LINUXAIO} if exists $ENV{EV_RECOMMEND_LINUXAIO};
181			$recommend_linuxaio = 0 + (prompt ("Treat linux aio as a recommended backend (y/n)?", $recommend_linuxaio ? "y" : "n") =~ /[yY]/);
182			$DEFINE .= " -DEV_RECOMMEND_LINUXAIO=$recommend_linuxaio";
183			}
184	root	1.58
185			print <<EOF;
186
187			* * * * * * * * * * * * * * * * * *
188
189
190	root	1.23	Similarly to the epoll backend above, EV can take advantage of kqueue on
191			many BSD systems. Support for kqueue will be detected at runtime, with a
192			safe fallback to other methods when it cannot be used.
193
194	root	1.31	Note that kqueue is broken on most operating systems, so by default it
195			won't be used on many platforms, but you can still create your own event
196	root	1.40	loop with kqueue backend if you ask specifically for it.
197	root	1.31
198			Here is what we know:
199	root	1.23
200	root	1.45	NetBSD: partially working in at least 3.1 and later. Yeah! :)
201			FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
202	root	1.28	sockets likely work, ptys definitely don't.
203	root	1.23	OpenBSD: reports indicate that it likely doesn't work
204			(similar problems as on FreeBSD).
205	root	1.45	OS X: completely, utterly broken on at least <= 10.6.
206	root	1.11
207	root	1.15	EOF
208
209	root	1.55	my $can_kqueue = have_inc "sys/event.h";
210	root	1.37	$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
211	root	1.23	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));
212	root	1.11
213			print <<EOF;
214
215	root	1.22	* * * * * * * * * * * * * * * * * *
216	root	1.11
217
218	root	1.21	Similarly to the kqueue backend above, EV can take advantage of the
219	root	1.26	solaris 10 event port interface. Support for event ports will be detected
220			at runtime, with a safe fallback to other methods when it cannot be used.
221	root	1.21
222			EOF
223
224	root	1.55	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (have_inc "sys/port.h") ? "y" : "n") =~ /[yY]/));
225	root	1.21
226			print <<EOF;
227
228	root	1.22	* * * * * * * * * * * * * * * * * *
229	root	1.21
230
231	root	1.11	EV needs the functions pthread_atfork and clock_gettime. On most systems
232	root	1.15	you need some special libraries for this (such as -lrt and -lpthread). You
233	root	1.23	can specify additional libraries to provide these calls (and any other
234			required by EV) now, or accept the default.
235	root	1.11
236	root	1.53	On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
237			to avoid the dependency on libpthread, and directly uses the clock_gettime
238			syscall to avoid a dependency on librt.
239
240	root	1.11	EOF
241
242	root	1.38	my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
243	root	1.53	my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
244			my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
245			$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;
246	root	1.15
247	root	1.11
248			print <<EOF;
249
250	root	1.22	* * * * * * * * * * * * * * * * * *
251	root	1.11
252
253	root	1.25	A backend of a different kind is the Linux inotify(7) interface, which can
254			be used to speed up (and reduce resource consumption) of stat watchers. If
255	root	1.40	you have the include file and libc support for it, it is usually a good
256			idea to enable it, as kernel availability is detected at runtime.
257	root	1.25
258			EOF
259
260	root	1.55	my $can_inotify = have_inc "sys/inotify.h";
261	root	1.37	$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
262	root	1.25	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));
263
264			print <<EOF;
265
266			* * * * * * * * * * * * * * * * * *
267
268
269	root	1.36	Another useful bit of functionality is the Linux eventfd, which is useful
270			for faster signal handling (don't care) and intra-thread communications
271			(more relevant). Kernel support for this will be probed at runtime, but
272			your libc must contain the necessary wrapper. Glibc 2.7 and later should
273			have this wrapper.
274
275			EOF
276
277	root	1.55	my $can_eventfd = have_inc "sys/eventfd.h";
278	root	1.37	$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
279			$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));
280	root	1.36
281			print <<EOF;
282
283			* * * * * * * * * * * * * * * * * *
284
285
286	root	1.42	Another sometimes useful bit of functionality is the Linux signalfd, which
287			is useful for faster signal handling (don't care). Kernel support for
288			this will be probed at runtime, but your libc must contain the necessary
289	root	1.44	wrapper. Glibc 2.7 and later should have this wrapper.
290	root	1.42
291			EOF
292
293	root	1.55	my $can_signalfd = have_inc "sys/signalfd.h";
294	root	1.42	$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
295			$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));
296
297			print <<EOF;
298
299			* * * * * * * * * * * * * * * * * *
300
301
302	root	1.61	Libev contains numerous internal assert() invocations to check for
303			consistency and user errors. These are normally enabled, but most
304			perl builds disable this error reporting mechanism by default. You
305			can re-enable these asserts here. Enabling them might help you catch
306			programming bugs earlier, but might cause a small slowdown. Also, failures
307			will be reported by aboritng your program, instead of throwing a perl
308			exception.
309
310			If unsure, enable this if you only use this perl installation for
311			development, and leave it off for use in production environments.
312
313			EOF
314
315			my $enable_assertions = 0;
316			$enable_assertions = 0 + (prompt ("Make sure assertions are enabled? (y/n)?", $enable_assertions ? "y" : "n") =~ /[yY]/);
317			$DEFINE .= " -DEV_ENABLE_ASERTIONS=1" if $enable_assertions;
318
319			print <<EOF;
320
321			* * * * * * * * * * * * * * * * * *
322
323
324	root	1.48	Very rarely, people want to tweak EV even more, e.g. to exclude
325	root	1.52	or include certain watcher types or backends. This can be done by adding
326	root	1.48	extra -D options here, or via the EV_EXTRA_DEFS environment variable.
327	root	1.52
328			For example, if you run into compile problems because of missing memory
329			fences (or you just want extra performance), you can tell EV to not support
330			smp and threads via -DEV_NO_THREADS.
331
332	root	1.48	Normal persons just press enter.
333
334			EOF
335
336	root	1.49	$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";
337	root	1.48
338			print <<EOF;
339
340			* * * * * * * * * * * * * * * * * *
341
342
343	root	1.11	EOF
344
345	root	1.47	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();
346	root	1.20
347	root	1.1	WriteMakefile(
348			dist => {
349	root	1.2	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
350	root	1.1	COMPRESS => 'gzip -9v',
351			SUFFIX => '.gz',
352			},
353	root	1.10	depend => {
354	root	1.13	"EV.c" => "EV/EVAPI.h "
355	root	1.17	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "
356	root	1.30	. "libev/ev_vars.h libev/ev_wrap.h",
357	root	1.10	},
358	root	1.8	INC => "-Ilibev",
359	root	1.11	DEFINE => "$DEFINE",
360	root	1.2	NAME => "EV",
361	root	1.11	LIBS => [$LIBS],
362	root	1.20	PREREQ_PM => {
363			@anyevent,
364	root	1.41	"common::sense" => 0,
365	root	1.20	},
366	root	1.57	CONFIGURE_REQUIRES => { "ExtUtils::MakeMaker" => 6.52, "Canary::Stability" => 0 },
367	root	1.2	VERSION_FROM => "EV.pm",
368	root	1.5	PM => {
369	root	1.54	'EV.pm' => '$(INST_LIB)/EV.pm',
370			'EV/EVAPI.h' => '$(INST_LIB)/EV/EVAPI.h',
371			'EV/MakeMaker.pm' => '$(INST_LIB)/EV/MakeMaker.pm',
372			'libev/ev.h' => '$(INST_LIB)/EV/ev.h',
373			'libev/ev.pod' => '$(INST_LIB)/EV/libev.pod',
374	root	1.5	},
375	root	1.34	MAN3PODS => {
376			'EV.pm' => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
377			'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
378	root	1.35	'libev/ev.pod' => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
379	root	1.34	},
380	root	1.1	);
381
382	root	1.6