[ViewVC] Annotation of: cvs/JSON-XS/Changes

Revision history for Perl extension JSON::XS

        - try to work around a possible char signedness issue on aix.
        - require common sense.

2.24  Sat May 30 08:25:45 CEST 2009
        - the incremental parser did not update its parse offset
          pointer correctly when parsing utf8-strings (nicely
          debugged by Martin Evans).
        - appending a non-utf8-string to the incremental parser
          in utf8 mode failed to upgrade the string.
        - wording of parse error messages has been improved.

2.232 Sun Feb 22 11:12:25 CET 2009
        - use an exponential algorithm to extend strings, to
          help platforms with bad or abysmal==windows memory
          allocater performance, at the expense of some memory
          wastage (use shrink to recover this extra memory).
          (nicely analysed by Dmitry Karasik).

2.2311 Thu Feb 19 02:12:54 CET 2009
        - add a section "JSON and ECMAscript" to explain some
          incompatibilities between the two (problem was noted by
          various people).
        - add t/20_faihu.t.

2.231 Thu Nov 20 04:59:08 CET 2008
        - work around 5.10.0 magic bugs where manipulating magic values
          (such as $1) would permanently damage them as perl would
          ignore the magicalness, by making a full copy of the string,
          reported by Dmitry Karasik.
        - work around spurious warnings under older perl 5.8's.

2.23 Mon Sep 29 05:08:29 CEST 2008
        - fix a compilation problem when perl is not using char * as, well,
          char *.
        - use PL_hexdigit in favour of rolling our own.

2.2222 Sun Jul 20 18:49:00 CEST 2008
        - same game again, broken 5.10 finds yet another assertion
          failure, and the workaround causes additional runtime warnings.
          Work around the next assertion AND the warning. 5.10 seriously
          needs to adjust it's attitude against working code.

2.222 Sat Jul 19 06:15:34 CEST 2008
        - you work around one -DDEBUGGING assertion bug in perl 5.10
          just to hit the next one. work around this one, too.

2.22 Tue Jul 15 13:26:51 CEST 2008
        - allow higher nesting levels in incremental parser.
        - error out earlier in some cases in the incremental parser
          (as suggested by Yuval Kogman).
        - improve incr-parser test (Yuval Kogman).

2.21 Tue Jun  3 08:43:23 CEST 2008
        - (hopefully) work around a perl 5.10 bug with -DDEBUGGING.
        - remove the experimental status of the incremental parser interface.
        - move =encoding around again, to avoid bugs with search.cpan.org.
          when can we finally have utf-8 in pod???
        - add ->incr_reset method.

2.2  Wed Apr 16 20:37:25 CEST 2008
        - lifted the log2 rounding restriction of max_depth and max_size.
        - make booleans mutable by creating a copy instead of handing out
          the same scalar (reported by pasha sadri).
        - added support for incremental json parsing (still EXPERIMENTAL).
        - implemented and added a json_xs command line utility that can convert
          from/to a number of serialisation formats - tell me if you need more.
        - implement allow_unknown/get_allow_unknown methods.
        - fixed documentation of max_depth w.r.t. higher and equal.
        - moved down =encoding directive a bit, too much breaks if it's the first
          pod directive :/.
        - removed documentation section on other modules, it became somewhat
          outdated and is nowadays mostly of historical interest.

2.1  Wed Mar 19 23:23:18 CET 2008
        - update documentation here and there: add a large section
          about utf8/latin1/ascii flags, add a security consideration
          and extend and clarify the JSON and YAML section.
        - medium speed enhancements when encoding/decoding non-ascii chars.
        - minor speedup in number encoding case.
        - extend and clarify the section on incompatibilities
          between YAML and JSON.
        - switch to static inline from just inline when using gcc.
        - add =encoding utf-8 to the manpage, now that perl 5.10 supports it.
        - fix some issues with UV to JSON conversion of unknown impact.
        - published the yahoo locals search result used in benchmarks as the
          original url changes so comparison is impossible.

2.01 Wed Dec  5 11:40:28 CET 2007
        - INCOMPATIBLE API CHANGE: to_json and from_json have been
          renamed to encode_json/decode_json for JSON.pm compatibility.
          The old functions croak and might be replaced by JSON.pm
          comaptible versions in some later release.

2.0  Tue Dec  4 11:30:46 CET 2007
        - this is supposed to be the first version of JSON::XS
          compatible with version 2.0+ of the JSON module.
          Using the JSON module as frontend to JSON::XS should be
          as fast as using JSON::XS directly, so consider using it
          instead.
        - added get_* methods for all "simple" options.
        - make JSON::XS subclassable.

1.53 Tue Nov 13 23:58:33 CET 2007
        - minor doc clarifications.
        - fixed many doc typos (patch by Thomas L. Shinnick).

1.52 Mon Oct 15 03:22:06 CEST 2007
        - remove =encoding pod directive again, it confuses too many pod
          parsers :/.

1.51 Sat Oct 13 03:55:56 CEST 2007
        - encode empty arrays/hashes in a compact way when pretty is enabled.
        - apparently JSON::XS was used to find some bugs in the
          JSON_checker testsuite, so add (the corrected) JSON_checker tests to
          the testsuite.
        - quite a bit of doc updates/extension.
        - require 5.8.2, as this seems to be the first unicode-stable version.

1.5  Tue Aug 28 04:05:38 CEST 2007
        - add support for tied hashes, based on ideas and testcase by
          Marcus Holland-Moritz.
        - implemented relaxed parsing mode where some extensions are being
          accepted. generation is still JSON-only.

1.44 Wed Aug 22 01:02:44 CEST 2007
        - very experimental process-emulation support, slowing everything down.
          the horribly broken perl threads are still not supported - YMMV.

1.43 Thu Jul 26 13:26:37 CEST 2007
        - convert big json numbers exclusively consisting of digits to NV
          only when there is no loss of precision, otherwise to string.

1.42 Tue Jul 24 00:51:18 CEST 2007
        - fix a crash caused by not handling missing array elements
          (report and testcase by Jay Kuri).

1.41 Tue Jul 10 18:21:44 CEST 2007
        - fix compilation with NDEBUG (assert side-effect),
          affects convert_blessed only.
        - fix a bug in decode filters calling ENTER; SAVETMPS;
          one time too often.
        - catch a typical error in TO_JSON methods.
        - antique-ised XS.xs again to work with outdated
          C compilers (windows...).

1.4  Mon Jul  2 10:06:30 CEST 2007
        - add convert_blessed setting.
        - encode did not catch all blessed objects, encoding their
          contents in most cases. This has been fixed by introducing
          the allow_blessed setting.
        - added filter_json_object and filter_json_single_key_object
          settings that specify a callback to be called when
          all/specific json objects are encountered.
        - assume that most object keys are simple ascii words and
          optimise this case, penalising the general case. This can
          speed up decoding by 30% in typical cases and gives
          a smaller and faster perl hash.
        - implemented simpleminded, optional resource size checking
          in decode_json.
        - remove objToJson/jsonToObj aliases, as the next version
          of JSON will not have them either.
        - bit the bullet and converted the very simple json object
          into a more complex one.
        - work around a bug where perl wrongly claims an integer
          is not an integer.
        - unbundle JSON::XS::Boolean into own pm file so Storable
          and similar modules can resolve the overloading when thawing.

1.3  Sun Jun 24 01:55:02 CEST 2007
        - make JSON::XS::true and false special overloaded objects
          and return those instead of 1 and 0 for those json atoms
          (JSON::PP compatibility is NOT achieved yet).
        - add JSON::XS::is_bool predicate to test for those special
          values.
        - add a reference to
          http://jpsykes.com/47/practical-csrf-and-json-security.
        - removed require 5.8.8 again, it is just not very expert-friendly.
          Also try to be more compatible with slightly older versions,
          which are not recommended (because they are buggy).

1.24 Mon Jun 11 05:40:49 CEST 2007
        - added informative section on JSON-as-YAML.
        - get rid of some c99-isms again.
        - localise dec->cur in decode_str, speeding up
          string decoding considerably (>15% on my amd64 + gcc).
        - increased SHORT_STRING_LEN to 16kb: stack space is
          usually plenty, and this actually saves memory
          when !shrinking as short strings will fit perfectly.

1.23 Wed Jun  6 20:13:06 CEST 2007
        - greatly improved small integer encoding and decoding speed.
        - implement a number of µ-optimisations.
        - updated benchmarks.

1.22 Thu May 24 00:07:25 CEST 2007
        - require 5.8.8 explicitly as older perls do not seem to offer
          the required macros.
        - possibly made it compile on so-called C compilers by microsoft.

1.21 Wed May  9 18:40:32 CEST 2007
        - character offset reported for trailing garbage was random.

1.2  Wed May  9 18:35:01 CEST 2007
        - decode did not work with magical scalars (doh!).
        - added latin1 flag to produce JSON texts in the latin1 subset
          of unicode.
        - flag trailing garbage as error.
        - new decode_prefix method that returns the number
          of characters consumed by a decode.
        - max octets/char in perls UTF-X is actually 13, not 11,
          as pointed out by Glenn Linderman.
        - fixed typoe reported by YAMASHINA Hio.

1.11 Mon Apr  9 07:05:49 CEST 2007
        - properly 0-terminate sv's returned by encode to help
          C libraries that expect that 0 to be there.
        - partially "port" JSON from C to microsofts fucking broken
          pseudo-C. They should be burned to the ground for pissing
          on standards. And I should be stoned for even trying to
          support this filthy excuse for a c compiler.

1.1  Wed Apr  4 01:45:00 CEST 2007
        - clarify documentation (pointed out by Quinn Weaver).
        - decode_utf8 sometimes did not correctly flag errors,
          leading to segfaults.
        - further reduced default nesting depth to 512 due to the test
          failure by that anonymous "chris" whose e-mail address seems
          to be impossible to get. Tests on other freebsd systems indicate
          that this is likely a problem in his/her configuration and not this
          module.
        - renamed json => JSON in error messages.
        - corrected the character offset in some error messages.

1.01 Sat Mar 31 16:15:40 CEST 2007
        - do not segfault when from_json/decode gets passed
          a non-string object (reported by Florian Ragwitz).
          This has no effect on normal operation.

1.0  Thu Mar 29 04:43:34 CEST 2007
        - the long awaited (by me) 1.0 version.
        - add \0 (JSON::XS::false) and \1 (JSON::XS::true) mappings to JSON
          true and false.
        - add some more notes to shrink, as suggested by Alex Efros.
        - improve testsuite.
        - halve the default nesting depth limit, to hopefully make it
          work on Freebsd (unfortunately, the cpan tester did not
          send me his report, so I cannot ask about the stack limit on fbsd).

0.8  Mon Mar 26 00:10:48 CEST 2007
        - fix a memleak when decoding hashes.
        - export jsonToBj and objToJson as aliases
          to to_json and from_json, to reduce incompatibilities
          between JSON/JSON::PC and JSON::XS. (experimental).
        - implement a maximum nesting depth for both en- and de-coding.
        - added a security considerations sections.

0.7  Sun Mar 25 01:46:30 CET 2007
        - code cleanup.
        - fix a memory overflow bug when indenting.
        - pretty-printing now up to 15% faster.
        - improve decoding speed of strings by
          up to 50% by specialcasing short strings.
        - further decoding speedups for strings using
          lots of \u escapes.
        - improve utf8 decoding speed for U+80 .. U+7FF.

0.5  Sat Mar 24 20:41:51 CET 2007
        - added the UTF-16 encoding example hinted at in previous
          versions.
        - minor documentation fixes.
        - fix a bug in and optimise canonicalising fastpath
          (reported by Craig Manley).
        - remove a subtest that breaks with bleadperl (reported
          by Andreas König).

0.31 Sat Mar 24 02:14:34 CET 2007
        - documentation updates.
        - do some casting to hopefully fix Andreas' problem.
        - nuke bogus json rpc stuff.

0.3  Fri Mar 23 19:33:21 CET 2007
        - remove spurious PApp::Util reference (John McNamara).
        - adapted lots of tests from other json modules
          (idea by Chris Carline).
        - documented mapping from json to perl and vice versa.
        - improved the documentation by adding more examples.
        - added short escaping forms, reducing the created
          json texts a bit.
        - added shrink flag.
        - when flag methods are called without enable argument
          they will by default enable their flag.
        - considerably improved string encoding speed (at least
          with gcc 4).
        - added a test that covers lots of different characters.
        - clarified some error messages.
        - error messages now use correct character offset
          with F_UTF8.
        - improve the "no bytes" and "no warnings" hacks in
          case the called functions do... stuff.
        - croak when encoding to ascii and an out-of-range
          (non-unicode) codepoint is encountered.

0.2  Fri Mar 23 00:23:34 CET 2007
        - the "could not sleep without debugging release".
          it should basically work now, with many bugs as
          no production tests have been run yet.
        - added more testcases.
        - the expected shitload of bugfixes.
        - handle utf8 flag correctly in decode.
        - fix segfault in decoder.
        - utf8n_to_uvuni sets retlen to -1, but retlen is an
          unsigned types (argh).
        - fix decoding of utf-8 strings.
        - improved error diagnostics.
        - fix decoding of 'null'.
        - fix parsing of empty array/hashes
        - silence warnings when we prepare the croak message.

0.1   Thu Mar 22 22:13:43 CET 2007
        - first release, very untested, basically just to claim
          the namespace.
 
0.01  Thu Mar 22 06:08:12 CET 2007
        - original version; cloned from Convert-Scalar

Revision:	1.129
Committed:	Mon Jul 13 22:13:17 2009 UTC (14 years, 10 months ago) by root
Branch:	MAIN
Changes since 1.128:	+1 -0 lines
Log Message:	* empty log message *
#	User	Rev	Content
1	root	1.1	Revision history for Perl extension JSON::XS
2	root	1.2
3	root	1.128	- try to work around a possible char signedness issue on aix.
4	root	1.129	- require common sense.
5	root	1.128
6	root	1.127	2.24 Sat May 30 08:25:45 CEST 2009
7			- the incremental parser did not update its parse offset
8			pointer correctly when parsing utf8-strings (nicely
9			debugged by Martin Evans).
10			- appending a non-utf8-string to the incremental parser
11			in utf8 mode failed to upgrade the string.
12			- wording of parse error messages has been improved.
13
14	root	1.126	2.232 Sun Feb 22 11:12:25 CET 2009
15	root	1.125	- use an exponential algorithm to extend strings, to
16	root	1.126	help platforms with bad or abysmal==windows memory
17			allocater performance, at the expense of some memory
18	root	1.125	wastage (use shrink to recover this extra memory).
19			(nicely analysed by Dmitry Karasik).
20
21	root	1.124	2.2311 Thu Feb 19 02:12:54 CET 2009
22	root	1.123	- add a section "JSON and ECMAscript" to explain some
23			incompatibilities between the two (problem was noted by
24			various people).
25	root	1.122	- add t/20_faihu.t.
26
27	root	1.121	2.231 Thu Nov 20 04:59:08 CET 2008
28			- work around 5.10.0 magic bugs where manipulating magic values
29			(such as $1) would permanently damage them as perl would
30			ignore the magicalness, by making a full copy of the string,
31			reported by Dmitry Karasik.
32	root	1.125	- work around spurious warnings under older perl 5.8's.
33	root	1.121
34	root	1.120	2.23 Mon Sep 29 05:08:29 CEST 2008
35			- fix a compilation problem when perl is not using char * as, well,
36			char *.
37	root	1.119	- use PL_hexdigit in favour of rolling our own.
38
39	root	1.118	2.2222 Sun Jul 20 18:49:00 CEST 2008
40			- same game again, broken 5.10 finds yet another assertion
41			failure, and the workaround causes additional runtime warnings.
42			Work around the next assertion AND the warning. 5.10 seriously
43			needs to adjust it's attitude against working code.
44
45	root	1.117	2.222 Sat Jul 19 06:15:34 CEST 2008
46			- you work around one -DDEBUGGING assertion bug in perl 5.10
47			just to hit the next one. work around this one, too.
48
49	root	1.116	2.22 Tue Jul 15 13:26:51 CEST 2008
50	root	1.115	- allow higher nesting levels in incremental parser.
51			- error out earlier in some cases in the incremental parser
52			(as suggested by Yuval Kogman).
53			- improve incr-parser test (Yuval Kogman).
54
55	root	1.114	2.21 Tue Jun 3 08:43:23 CEST 2008
56			- (hopefully) work around a perl 5.10 bug with -DDEBUGGING.
57	root	1.112	- remove the experimental status of the incremental parser interface.
58	root	1.111	- move =encoding around again, to avoid bugs with search.cpan.org.
59			when can we finally have utf-8 in pod???
60	root	1.113	- add ->incr_reset method.
61	root	1.111
62	root	1.110	2.2 Wed Apr 16 20:37:25 CEST 2008
63	root	1.109	- lifted the log2 rounding restriction of max_depth and max_size.
64	root	1.107	- make booleans mutable by creating a copy instead of handing out
65			the same scalar (reported by pasha sadri).
66	root	1.105	- added support for incremental json parsing (still EXPERIMENTAL).
67	root	1.103	- implemented and added a json_xs command line utility that can convert
68			from/to a number of serialisation formats - tell me if you need more.
69	root	1.108	- implement allow_unknown/get_allow_unknown methods.
70	root	1.109	- fixed documentation of max_depth w.r.t. higher and equal.
71	root	1.112	- moved down =encoding directive a bit, too much breaks if it's the first
72	root	1.102	pod directive :/.
73	root	1.106	- removed documentation section on other modules, it became somewhat
74			outdated and is nowadays mostly of historical interest.
75	root	1.102
76	root	1.101	2.1 Wed Mar 19 23:23:18 CET 2008
77			- update documentation here and there: add a large section
78			about utf8/latin1/ascii flags, add a security consideration
79			and extend and clarify the JSON and YAML section.
80	root	1.98	- medium speed enhancements when encoding/decoding non-ascii chars.
81	root	1.100	- minor speedup in number encoding case.
82	root	1.92	- extend and clarify the section on incompatibilities
83			between YAML and JSON.
84	root	1.95	- switch to static inline from just inline when using gcc.
85	root	1.94	- add =encoding utf-8 to the manpage, now that perl 5.10 supports it.
86	root	1.100	- fix some issues with UV to JSON conversion of unknown impact.
87	root	1.99	- published the yahoo locals search result used in benchmarks as the
88			original url changes so comparison is impossible.
89	root	1.92
90	root	1.91	2.01 Wed Dec 5 11:40:28 CET 2007
91			- INCOMPATIBLE API CHANGE: to_json and from_json have been
92			renamed to encode_json/decode_json for JSON.pm compatibility.
93			The old functions croak and might be replaced by JSON.pm
94			comaptible versions in some later release.
95
96	root	1.90	2.0 Tue Dec 4 11:30:46 CET 2007
97			- this is supposed to be the first version of JSON::XS
98			compatible with version 2.0+ of the JSON module.
99			Using the JSON module as frontend to JSON::XS should be
100			as fast as using JSON::XS directly, so consider using it
101			instead.
102	root	1.88	- added get_* methods for all "simple" options.
103	root	1.89	- make JSON::XS subclassable.
104	root	1.88
105	root	1.86	1.53 Tue Nov 13 23:58:33 CET 2007
106	root	1.85	- minor doc clarifications.
107			- fixed many doc typos (patch by Thomas L. Shinnick).
108
109	root	1.84	1.52 Mon Oct 15 03:22:06 CEST 2007
110	root	1.83	- remove =encoding pod directive again, it confuses too many pod
111			parsers :/.
112
113	root	1.82	1.51 Sat Oct 13 03:55:56 CEST 2007
114	root	1.81	- encode empty arrays/hashes in a compact way when pretty is enabled.
115	root	1.87	- apparently JSON::XS was used to find some bugs in the
116	root	1.80	JSON_checker testsuite, so add (the corrected) JSON_checker tests to
117			the testsuite.
118			- quite a bit of doc updates/extension.
119	root	1.79	- require 5.8.2, as this seems to be the first unicode-stable version.
120	root	1.78
121	root	1.77	1.5 Tue Aug 28 04:05:38 CEST 2007
122	root	1.74	- add support for tied hashes, based on ideas and testcase by
123			Marcus Holland-Moritz.
124	root	1.75	- implemented relaxed parsing mode where some extensions are being
125			accepted. generation is still JSON-only.
126	root	1.74
127			1.44 Wed Aug 22 01:02:44 CEST 2007
128	root	1.73	- very experimental process-emulation support, slowing everything down.
129			the horribly broken perl threads are still not supported - YMMV.
130
131	root	1.72	1.43 Thu Jul 26 13:26:37 CEST 2007
132			- convert big json numbers exclusively consisting of digits to NV
133			only when there is no loss of precision, otherwise to string.
134
135	root	1.71	1.42 Tue Jul 24 00:51:18 CEST 2007
136			- fix a crash caused by not handling missing array elements
137			(report and testcase by Jay Kuri).
138
139	root	1.70	1.41 Tue Jul 10 18:21:44 CEST 2007
140			- fix compilation with NDEBUG (assert side-effect),
141			affects convert_blessed only.
142	root	1.69	- fix a bug in decode filters calling ENTER; SAVETMPS;
143			one time too often.
144	root	1.70	- catch a typical error in TO_JSON methods.
145	root	1.69	- antique-ised XS.xs again to work with outdated
146			C compilers (windows...).
147
148	root	1.68	1.4 Mon Jul 2 10:06:30 CEST 2007
149	root	1.63	- add convert_blessed setting.
150	root	1.56	- encode did not catch all blessed objects, encoding their
151			contents in most cases. This has been fixed by introducing
152			the allow_blessed setting.
153	root	1.65	- added filter_json_object and filter_json_single_key_object
154			settings that specify a callback to be called when
155	root	1.67	all/specific json objects are encountered.
156	root	1.59	- assume that most object keys are simple ascii words and
157			optimise this case, penalising the general case. This can
158			speed up decoding by 30% in typical cases and gives
159			a smaller and faster perl hash.
160	root	1.58	- implemented simpleminded, optional resource size checking
161			in decode_json.
162	root	1.61	- remove objToJson/jsonToObj aliases, as the next version
163			of JSON will not have them either.
164	root	1.62	- bit the bullet and converted the very simple json object
165			into a more complex one.
166	root	1.64	- work around a bug where perl wrongly claims an integer
167			is not an integer.
168	root	1.65	- unbundle JSON::XS::Boolean into own pm file so Storable
169			and similar modules can resolve the overloading when thawing.
170	root	1.56
171	root	1.55	1.3 Sun Jun 24 01:55:02 CEST 2007
172	root	1.54	- make JSON::XS::true and false special overloaded objects
173			and return those instead of 1 and 0 for those json atoms
174			(JSON::PP compatibility is NOT achieved yet).
175			- add JSON::XS::is_bool predicate to test for those special
176			values.
177	root	1.52	- add a reference to
178			http://jpsykes.com/47/practical-csrf-and-json-security.
179	root	1.60	- removed require 5.8.8 again, it is just not very expert-friendly.
180			Also try to be more compatible with slightly older versions,
181	root	1.54	which are not recommended (because they are buggy).
182	root	1.52
183	root	1.51	1.24 Mon Jun 11 05:40:49 CEST 2007
184	root	1.49	- added informative section on JSON-as-YAML.
185	root	1.51	- get rid of some c99-isms again.
186	root	1.50	- localise dec->cur in decode_str, speeding up
187			string decoding considerably (>15% on my amd64 + gcc).
188			- increased SHORT_STRING_LEN to 16kb: stack space is
189			usually plenty, and this actually saves memory
190	root	1.51	when !shrinking as short strings will fit perfectly.
191	root	1.49
192	root	1.47	1.23 Wed Jun 6 20:13:06 CEST 2007
193	root	1.46	- greatly improved small integer encoding and decoding speed.
194			- implement a number of µ-optimisations.
195	root	1.47	- updated benchmarks.
196	root	1.46
197	root	1.45	1.22 Thu May 24 00:07:25 CEST 2007
198	root	1.42	- require 5.8.8 explicitly as older perls do not seem to offer
199			the required macros.
200	root	1.43	- possibly made it compile on so-called C compilers by microsoft.
201	root	1.42
202	root	1.41	1.21 Wed May 9 18:40:32 CEST 2007
203	root	1.47	- character offset reported for trailing garbage was random.
204	root	1.41
205	root	1.40	1.2 Wed May 9 18:35:01 CEST 2007
206			- decode did not work with magical scalars (doh!).
207	root	1.38	- added latin1 flag to produce JSON texts in the latin1 subset
208			of unicode.
209	root	1.39	- flag trailing garbage as error.
210			- new decode_prefix method that returns the number
211			of characters consumed by a decode.
212	root	1.40	- max octets/char in perls UTF-X is actually 13, not 11,
213			as pointed out by Glenn Linderman.
214			- fixed typoe reported by YAMASHINA Hio.
215	root	1.34
216	root	1.32	1.11 Mon Apr 9 07:05:49 CEST 2007
217			- properly 0-terminate sv's returned by encode to help
218			C libraries that expect that 0 to be there.
219	root	1.31	- partially "port" JSON from C to microsofts fucking broken
220			pseudo-C. They should be burned to the ground for pissing
221			on standards. And I should be stoned for even trying to
222	root	1.32	support this filthy excuse for a c compiler.
223	root	1.6
224	root	1.30	1.1 Wed Apr 4 01:45:00 CEST 2007
225	root	1.28	- clarify documentation (pointed out by Quinn Weaver).
226	root	1.29	- decode_utf8 sometimes did not correctly flag errors,
227			leading to segfaults.
228	root	1.30	- further reduced default nesting depth to 512 due to the test
229			failure by that anonymous "chris" whose e-mail address seems
230			to be impossible to get. Tests on other freebsd systems indicate
231			that this is likely a problem in his/her configuration and not this
232			module.
233			- renamed json => JSON in error messages.
234			- corrected the character offset in some error messages.
235	root	1.28
236	root	1.27	1.01 Sat Mar 31 16:15:40 CEST 2007
237			- do not segfault when from_json/decode gets passed
238			a non-string object (reported by Florian Ragwitz).
239			This has no effect on normal operation.
240
241	root	1.25	1.0 Thu Mar 29 04:43:34 CEST 2007
242			- the long awaited (by me) 1.0 version.
243			- add \0 (JSON::XS::false) and \1 (JSON::XS::true) mappings to JSON
244			true and false.
245	root	1.24	- add some more notes to shrink, as suggested by Alex Efros.
246	root	1.25	- improve testsuite.
247	root	1.26	- halve the default nesting depth limit, to hopefully make it
248	root	1.25	work on Freebsd (unfortunately, the cpan tester did not
249			send me his report, so I cannot ask about the stack limit on fbsd).
250	root	1.24
251	root	1.23	0.8 Mon Mar 26 00:10:48 CEST 2007
252	root	1.21	- fix a memleak when decoding hashes.
253	root	1.20	- export jsonToBj and objToJson as aliases
254			to to_json and from_json, to reduce incompatibilities
255			between JSON/JSON::PC and JSON::XS. (experimental).
256	root	1.21	- implement a maximum nesting depth for both en- and de-coding.
257			- added a security considerations sections.
258	root	1.20
259	root	1.19	0.7 Sun Mar 25 01:46:30 CET 2007
260	root	1.16	- code cleanup.
261			- fix a memory overflow bug when indenting.
262			- pretty-printing now up to 15% faster.
263			- improve decoding speed of strings by
264			up to 50% by specialcasing short strings.
265			- further decoding speedups for strings using
266			lots of \u escapes.
267	root	1.17	- improve utf8 decoding speed for U+80 .. U+7FF.
268	root	1.16
269	root	1.15	0.5 Sat Mar 24 20:41:51 CET 2007
270	root	1.14	- added the UTF-16 encoding example hinted at in previous
271			versions.
272			- minor documentation fixes.
273	root	1.15	- fix a bug in and optimise canonicalising fastpath
274			(reported by Craig Manley).
275			- remove a subtest that breaks with bleadperl (reported
276			by Andreas König).
277	root	1.14
278	root	1.13	0.31 Sat Mar 24 02:14:34 CET 2007
279	root	1.12	- documentation updates.
280	root	1.13	- do some casting to hopefully fix Andreas' problem.
281			- nuke bogus json rpc stuff.
282	root	1.12
283	root	1.11	0.3 Fri Mar 23 19:33:21 CET 2007
284	root	1.5	- remove spurious PApp::Util reference (John McNamara).
285			- adapted lots of tests from other json modules
286			(idea by Chris Carline).
287	root	1.9	- documented mapping from json to perl and vice versa.
288	root	1.11	- improved the documentation by adding more examples.
289	root	1.5	- added short escaping forms, reducing the created
290			json texts a bit.
291			- added shrink flag.
292			- when flag methods are called without enable argument
293			they will by default enable their flag.
294			- considerably improved string encoding speed (at least
295			with gcc 4).
296	root	1.7	- added a test that covers lots of different characters.
297			- clarified some error messages.
298			- error messages now use correct character offset
299			with F_UTF8.
300	root	1.8	- improve the "no bytes" and "no warnings" hacks in
301			case the called functions do... stuff.
302	root	1.9	- croak when encoding to ascii and an out-of-range
303			(non-unicode) codepoint is encountered.
304	root	1.4
305	root	1.3	0.2 Fri Mar 23 00:23:34 CET 2007
306	root	1.109	- the "could not sleep without debugging release".
307	root	1.3	it should basically work now, with many bugs as
308			no production tests have been run yet.
309			- added more testcases.
310			- the expected shitload of bugfixes.
311			- handle utf8 flag correctly in decode.
312			- fix segfault in decoder.
313			- utf8n_to_uvuni sets retlen to -1, but retlen is an
314			unsigned types (argh).
315			- fix decoding of utf-8 strings.
316			- improved error diagnostics.
317			- fix decoding of 'null'.
318			- fix parsing of empty array/hashes
319			- silence warnings when we prepare the croak message.
320
321	root	1.2	0.1 Thu Mar 22 22:13:43 CET 2007
322			- first release, very untested, basically just to claim
323			the namespace.
324	root	1.1
325			0.01 Thu Mar 22 06:08:12 CET 2007
326			- original version; cloned from Convert-Scalar
327