Linux-AIO/AIO.pm

=head1 NAME

Linux::AIO - linux-specific aio implemented using clone

=head1 SYNOPSIS

 use Linux::AIO;

=head1 DESCRIPTION

This module implements asynchronous i/o using the means available to linux
- clone. It does not hook into the POSIX aio_* functions because linux
does not yet support these in the kernel (and even if, it would only allow
aio_read and write, not open and stat).

Instead, in this module a number of (non-posix) threads are started that
execute your read/writes and signal their completion. You don't need
thread support in your libc or perl, and the threads created by this
module will not be visible to the pthreads library.

NOTICE: the threads created by this module will automatically be killed
when the thread calling min_parallel exits. Make sure you only ever call
min_parallel from the same thread that loaded this module.

Although the module will work with threads, it is not reentrant, so use
appropriate locking yourself.

=over 4

=cut

package Linux::AIO;

use base 'Exporter';

BEGIN {
   $VERSION = 1.41;

   @EXPORT = qw(aio_read aio_write aio_open aio_close aio_stat aio_lstat aio_unlink);
   @EXPORT_OK = qw(poll_fileno poll_cb min_parallel max_parallel nreqs);

   require XSLoader;
   XSLoader::load Linux::AIO, $VERSION;
}

=item Linux::AIO::min_parallel $nthreads

Set the minimum number of AIO threads to C<$nthreads>. The default is
C<1>, which means a single asynchronous operation can be done at one time
(the number of outstanding operations, however, is unlimited).

It is recommended to keep the number of threads low, as many linux
kernel versions will scale negatively with the number of threads (higher
parallelity => MUCH higher latency).

=item $fileno = Linux::AIO::poll_fileno

Return the I<request result pipe filehandle>. This filehandle must be
polled for reading by some mechanism outside this module (e.g. Event
or select, see below). If the pipe becomes readable you have to call
C<poll_cb> to check the results.

=item Linux::AIO::poll_cb

Process all outstanding events on the result pipe. You have to call this
regularly. Returns the number of events processed. Returns immediately
when no events are outstanding.

You can use Event to multiplex, e.g.:

   Event->io (fd => Linux::AIO::poll_fileno,
              poll => 'r', async => 1,
              cb => \&Linux::AIO::poll_cb );

=item Linux::AIO::nreqs

Returns the number of requests currently outstanding.

=item aio_open  $pathname, $flags, $mode, $callback

Asynchronously open or create a file and call the callback with the
filedescriptor (NOT a perl filehandle, sorry for that, but watch out, this
might change in the future).

=item aio_close $fh, $callback

Asynchronously close a file and call the callback with the result code.

=item aio_read  $fh,$offset,$length, $data,$dataoffset,$callback

=item aio_write $fh,$offset,$length, $data,$dataoffset,$callback

Reads or writes C<length> bytes from the specified C<fh> and C<offset>
into the scalar given by C<data> and offset C<dataoffset> and calls the
callback without the actual number of bytes read (or C<undef> on error).

=item aio_stat  $fh_or_path, $callback

=item aio_lstat $fh, $callback

Works like perl's C<stat> or C<lstat> in void context. The callback will
be called after the stat and the results will be available using C<stat _>
or C<-s _> etc...

Currently, the stats are always 64-bit-stats, i.e. instead of returning an
error when stat'ing a large file, the results will be silently truncated
unless perl itself is compiled with large file support.

=item aio_unlink  $pathname, $callback

Asynchronously unlink a file.

=cut

min_parallel 1;

END {
   max_parallel 0;
}

1;

=back

=head1 BUGS

This module has been extensively tested in a large and very busy webserver
for many years now.

   - aio_open gives a fd, but all other functions expect a perl filehandle.

=head1 SEE ALSO

L<Coro>.

=head1 AUTHOR

 Marc Lehmann <schmorp@schmorp.de>
 http://home.schmorp.de/

=cut

Revision:	1.23
Committed:	Wed Jun 29 15:22:36 2005 UTC (18 years, 10 months ago) by root
Branch:	MAIN
Changes since 1.22:	+0 -1 lines
Log Message:	* empty log message *
#	User	Rev	Content
1	root	1.1	=head1 NAME
2
3			Linux::AIO - linux-specific aio implemented using clone
4
5			=head1 SYNOPSIS
6
7			use Linux::AIO;
8
9			=head1 DESCRIPTION
10
11	root	1.14	This module implements asynchronous i/o using the means available to linux
12			- clone. It does not hook into the POSIX aio_* functions because linux
13			does not yet support these in the kernel (and even if, it would only allow
14			aio_read and write, not open and stat).
15
16			Instead, in this module a number of (non-posix) threads are started that
17			execute your read/writes and signal their completion. You don't need
18			thread support in your libc or perl, and the threads created by this
19			module will not be visible to the pthreads library.
20	root	1.3
21	root	1.17	NOTICE: the threads created by this module will automatically be killed
22			when the thread calling min_parallel exits. Make sure you only ever call
23			min_parallel from the same thread that loaded this module.
24
25	root	1.16	Although the module will work with threads, it is not reentrant, so use
26			appropriate locking yourself.
27
28	root	1.1	=over 4
29
30			=cut
31
32			package Linux::AIO;
33
34	root	1.2	use base 'Exporter';
35
36	root	1.1	BEGIN {
37	root	1.22	$VERSION = 1.41;
38	root	1.1
39	root	1.17	@EXPORT = qw(aio_read aio_write aio_open aio_close aio_stat aio_lstat aio_unlink);
40	root	1.2	@EXPORT_OK = qw(poll_fileno poll_cb min_parallel max_parallel nreqs);
41
42	root	1.1	require XSLoader;
43			XSLoader::load Linux::AIO, $VERSION;
44			}
45
46	root	1.14	=item Linux::AIO::min_parallel $nthreads
47	root	1.1
48	root	1.16	Set the minimum number of AIO threads to C<$nthreads>. The default is
49			C<1>, which means a single asynchronous operation can be done at one time
50			(the number of outstanding operations, however, is unlimited).
51	root	1.1
52	root	1.14	It is recommended to keep the number of threads low, as many linux
53			kernel versions will scale negatively with the number of threads (higher
54			parallelity => MUCH higher latency).
55
56	root	1.2	=item $fileno = Linux::AIO::poll_fileno
57
58	root	1.14	Return the I<request result pipe filehandle>. This filehandle must be
59			polled for reading by some mechanism outside this module (e.g. Event
60			or select, see below). If the pipe becomes readable you have to call
61			C<poll_cb> to check the results.
62	root	1.2
63			=item Linux::AIO::poll_cb
64
65			Process all outstanding events on the result pipe. You have to call this
66	root	1.14	regularly. Returns the number of events processed. Returns immediately
67			when no events are outstanding.
68	root	1.2
69	root	1.3	You can use Event to multiplex, e.g.:
70
71	root	1.14	Event->io (fd => Linux::AIO::poll_fileno,
72			poll => 'r', async => 1,
73			cb => \&Linux::AIO::poll_cb );
74	root	1.3
75	root	1.2	=item Linux::AIO::nreqs
76
77			Returns the number of requests currently outstanding.
78	root	1.4
79	root	1.14	=item aio_open $pathname, $flags, $mode, $callback
80	root	1.10
81			Asynchronously open or create a file and call the callback with the
82	root	1.14	filedescriptor (NOT a perl filehandle, sorry for that, but watch out, this
83			might change in the future).
84	root	1.10
85	root	1.14	=item aio_close $fh, $callback
86	root	1.10
87			Asynchronously close a file and call the callback with the result code.
88
89	root	1.14	=item aio_read $fh,$offset,$length, $data,$dataoffset,$callback
90	root	1.9
91	root	1.14	=item aio_write $fh,$offset,$length, $data,$dataoffset,$callback
92	root	1.4
93			Reads or writes C<length> bytes from the specified C<fh> and C<offset>
94			into the scalar given by C<data> and offset C<dataoffset> and calls the
95	root	1.14	callback without the actual number of bytes read (or C<undef> on error).
96	root	1.4
97	root	1.14	=item aio_stat $fh_or_path, $callback
98	root	1.4
99	root	1.14	=item aio_lstat $fh, $callback
100	root	1.5
101	root	1.14	Works like perl's C<stat> or C<lstat> in void context. The callback will
102			be called after the stat and the results will be available using C<stat _>
103			or C<-s _> etc...
104	root	1.5
105	root	1.10	Currently, the stats are always 64-bit-stats, i.e. instead of returning an
106			error when stat'ing a large file, the results will be silently truncated
107			unless perl itself is compiled with large file support.
108	root	1.17
109			=item aio_unlink $pathname, $callback
110
111	root	1.18	Asynchronously unlink a file.
112	root	1.2
113	root	1.1	=cut
114	root	1.16
115			min_parallel 1;
116	root	1.2
117			END {
118			max_parallel 0;
119			}
120	root	1.1
121			1;
122
123			=back
124
125			=head1 BUGS
126
127	root	1.14	This module has been extensively tested in a large and very busy webserver
128			for many years now.
129	root	1.1
130	root	1.14	- aio_open gives a fd, but all other functions expect a perl filehandle.
131	root	1.6
132	root	1.1	=head1 SEE ALSO
133
134			L<Coro>.
135
136			=head1 AUTHOR
137
138	root	1.22	Marc Lehmann <schmorp@schmorp.de>
139	root	1.20	http://home.schmorp.de/
140	root	1.1
141			=cut
142