[ViewVC] Annotation of: cvs/deliantra/server/utils/missing

#! /bin/sh
# Common stub for a few missing GNU programs while installing.

scriptversion=2004-09-07.08

# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
#   Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.

# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

if test $# -eq 0; then
  echo 1>&2 "Try \`$0 --help' for more information"
  exit 1
fi

run=:

# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
  configure_ac=configure.ac
else
  configure_ac=configure.in
fi

msg="missing on your system"

case "$1" in
--run)
  # Try to run requested program, and just exit if it succeeds.
  run=
  shift
  "$@" && exit 0
  # Exit code 63 means version mismatch.  This often happens
  # when the user try to use an ancient version of a tool on
  # a file that requires a minimum version.  In this case we
  # we should proceed has if the program had been absent, or
  # if --run hadn't been passed.
  if test $? = 63; then
    run=:
    msg="probably too old"
  fi
  ;;

  -h|--h|--he|--hel|--help)
    echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...

Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.

Options:
  -h, --help      display this help and exit
  -v, --version   output version information and exit
  --run           try to run the given command, and emulate it if it fails

Supported PROGRAM values:
  aclocal      touch file \`aclocal.m4'
  autoconf     touch file \`configure'
  autoheader   touch file \`config.h.in'
  automake     touch all \`Makefile.in' files
  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
  flex         create \`lex.yy.c', if possible, from existing .c
  help2man     touch the output file
  lex          create \`lex.yy.c', if possible, from existing .c
  makeinfo     touch the output file
  tar          try tar, gnutar, gtar, then tar without non-portable flags
  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]

Send bug reports to <bug-automake@gnu.org>."
    exit 0
    ;;

  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
    echo "missing $scriptversion (GNU Automake)"
    exit 0
    ;;

  -*)
    echo 1>&2 "$0: Unknown \`$1' option"
    echo 1>&2 "Try \`$0 --help' for more information"
    exit 1
    ;;

esac

# Now exit if we have it, but it failed.  Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
case "$1" in
  lex|yacc)
    # Not GNU programs, they don't have --version.
    ;;

  tar)
    if test -n "$run"; then
       echo 1>&2 "ERROR: \`tar' requires --run"
       exit 1
    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
       exit 1
    fi
    ;;

  *)
    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
       # We have it, but it failed.
       exit 1
    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
       # Could not run --version or --help.  This is probably someone
       # running `$TOOL --version' or `$TOOL --help' to check whether
       # $TOOL exists and not knowing $TOOL uses missing.
       exit 1
    fi
    ;;
esac

# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
  aclocal*)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
         to install the \`Automake' and \`Perl' packages.  Grab them from
         any GNU archive site."
    touch aclocal.m4
    ;;

  autoconf)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`${configure_ac}'.  You might want to install the
         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
         archive site."
    touch configure
    ;;

  autoheader)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
         from any GNU archive site."
    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
    test -z "$files" && files="config.h"
    touch_files=
    for f in $files; do
      case "$f" in
      *:*) touch_files="$touch_files "`echo "$f" |
                                       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
      *) touch_files="$touch_files $f.in";;
      esac
    done
    touch $touch_files
    ;;

  automake*)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
         You might want to install the \`Automake' and \`Perl' packages.
         Grab them from any GNU archive site."
    find . -type f -name Makefile.am -print |
           sed 's/\.am$/.in/' |
           while read f; do touch "$f"; done
    ;;

  autom4te)
    echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
         You might have modified some files without having the
         proper tools for further handling them.
         You can get \`$1' as part of \`Autoconf' from any GNU
         archive site."

    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
    if test -f "$file"; then
        touch $file
    else
        test -z "$file" || exec >$file
        echo "#! /bin/sh"
        echo "# Created by GNU Automake missing as a replacement of"
        echo "#  $ $@"
        echo "exit 0"
        chmod +x $file
        exit 1
    fi
    ;;

  bison|yacc)
    echo 1>&2 "\
WARNING: \`$1' $msg.  You should only need it if
         you modified a \`.y' file.  You may need the \`Bison' package
         in order for those modifications to take effect.  You can get
         \`Bison' from any GNU archive site."
    rm -f y.tab.c y.tab.h
    if [ $# -ne 1 ]; then
        eval LASTARG="\${$#}"
        case "$LASTARG" in
        *.y)
            SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
            if [ -f "$SRCFILE" ]; then
                 cp "$SRCFILE" y.tab.c
            fi
            SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
            if [ -f "$SRCFILE" ]; then
                 cp "$SRCFILE" y.tab.h
            fi
          ;;
        esac
    fi
    if [ ! -f y.tab.h ]; then
        echo >y.tab.h
    fi
    if [ ! -f y.tab.c ]; then
        echo 'main() { return 0; }' >y.tab.c
    fi
    ;;

  lex|flex)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified a \`.l' file.  You may need the \`Flex' package
         in order for those modifications to take effect.  You can get
         \`Flex' from any GNU archive site."
    rm -f lex.yy.c
    if [ $# -ne 1 ]; then
        eval LASTARG="\${$#}"
        case "$LASTARG" in
        *.l)
            SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
            if [ -f "$SRCFILE" ]; then
                 cp "$SRCFILE" lex.yy.c
            fi
          ;;
        esac
    fi
    if [ ! -f lex.yy.c ]; then
        echo 'main() { return 0; }' >lex.yy.c
    fi
    ;;

  help2man)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified a dependency of a manual page.  You may need the
         \`Help2man' package in order for those modifications to take
         effect.  You can get \`Help2man' from any GNU archive site."

    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
    if test -z "$file"; then
        file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
    fi
    if [ -f "$file" ]; then
        touch $file
    else
        test -z "$file" || exec >$file
        echo ".ab help2man is required to generate this page"
        exit 1
    fi
    ;;

  makeinfo)
    echo 1>&2 "\
WARNING: \`$1' is $msg.  You should only need it if
         you modified a \`.texi' or \`.texinfo' file, or any other file
         indirectly affecting the aspect of the manual.  The spurious
         call might also be the consequence of using a buggy \`make' (AIX,
         DU, IRIX).  You might want to install the \`Texinfo' package or
         the \`GNU make' package.  Grab either from any GNU archive site."
    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
    if test -z "$file"; then
      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
    fi
    touch $file
    ;;

  tar)
    shift

    # We have already tried tar in the generic part.
    # Look for gnutar/gtar before invocation to avoid ugly error
    # messages.
    if (gnutar --version > /dev/null 2>&1); then
       gnutar "$@" && exit 0
    fi
    if (gtar --version > /dev/null 2>&1); then
       gtar "$@" && exit 0
    fi
    firstarg="$1"
    if shift; then
        case "$firstarg" in
        *o*)
            firstarg=`echo "$firstarg" | sed s/o//`
            tar "$firstarg" "$@" && exit 0
            ;;
        esac
        case "$firstarg" in
        *h*)
            firstarg=`echo "$firstarg" | sed s/h//`
            tar "$firstarg" "$@" && exit 0
            ;;
        esac
    fi

    echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
         You may want to install GNU tar or Free paxutils, or check the
         command line arguments."
    exit 1
    ;;

  *)
    echo 1>&2 "\
WARNING: \`$1' is needed, and is $msg.
         You might have modified some files without having the
         proper tools for further handling them.  Check the \`README' file,
         it often tells you about the needed prerequisites for installing
         this package.  You may also peek at any GNU archive site, in case
         some other package would contain this missing \`$1' program."
    exit 1
    ;;
esac

exit 0

# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
Revision:	1.1.1.1 (vendor branch)
Committed:	Fri Feb 3 07:14:50 2006 UTC (18 years, 3 months ago) by root
Branch:	UPSTREAM
CVS Tags:	LAST_C_VERSION, UPSTREAM_2006_03_15, rel-2_0, UPSTREAM_2006_02_22, UPSTREAM_2006_02_03, difficulty_fix_merge_060810_2300
Branch point for:	difficulty_fix
Changes since 1.1:	+0 -0 lines
Log Message:	initial import
#	User	Rev	Content
1	root	1.1	#! /bin/sh
2			# Common stub for a few missing GNU programs while installing.
3
4			scriptversion=2004-09-07.08
5
6			# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
7			# Free Software Foundation, Inc.
8			# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
9
10			# This program is free software; you can redistribute it and/or modify
11			# it under the terms of the GNU General Public License as published by
12			# the Free Software Foundation; either version 2, or (at your option)
13			# any later version.
14
15			# This program is distributed in the hope that it will be useful,
16			# but WITHOUT ANY WARRANTY; without even the implied warranty of
17			# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18			# GNU General Public License for more details.
19
20			# You should have received a copy of the GNU General Public License
21			# along with this program; if not, write to the Free Software
22			# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
23			# 02111-1307, USA.
24
25			# As a special exception to the GNU General Public License, if you
26			# distribute this file as part of a program that contains a
27			# configuration script generated by Autoconf, you may include it under
28			# the same distribution terms that you use for the rest of that program.
29
30			if test $# -eq 0; then
31			echo 1>&2 "Try \`$0 --help' for more information"
32			exit 1
33			fi
34
35			run=:
36
37			# In the cases where this matters, `missing' is being run in the
38			# srcdir already.
39			if test -f configure.ac; then
40			configure_ac=configure.ac
41			else
42			configure_ac=configure.in
43			fi
44
45			msg="missing on your system"
46
47			case "$1" in
48			--run)
49			# Try to run requested program, and just exit if it succeeds.
50			run=
51			shift
52			"$@" && exit 0
53			# Exit code 63 means version mismatch. This often happens
54			# when the user try to use an ancient version of a tool on
55			# a file that requires a minimum version. In this case we
56			# we should proceed has if the program had been absent, or
57			# if --run hadn't been passed.
58			if test $? = 63; then
59			run=:
60			msg="probably too old"
61			fi
62			;;
63
64			-h\|--h\|--he\|--hel\|--help)
65			echo "\
66			$0 [OPTION]... PROGRAM [ARGUMENT]...
67
68			Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
69			error status if there is no known handling for PROGRAM.
70
71			Options:
72			-h, --help display this help and exit
73			-v, --version output version information and exit
74			--run try to run the given command, and emulate it if it fails
75
76			Supported PROGRAM values:
77			aclocal touch file \`aclocal.m4'
78			autoconf touch file \`configure'
79			autoheader touch file \`config.h.in'
80			automake touch all \`Makefile.in' files
81			bison create \`y.tab.[ch]', if possible, from existing .[ch]
82			flex create \`lex.yy.c', if possible, from existing .c
83			help2man touch the output file
84			lex create \`lex.yy.c', if possible, from existing .c
85			makeinfo touch the output file
86			tar try tar, gnutar, gtar, then tar without non-portable flags
87			yacc create \`y.tab.[ch]', if possible, from existing .[ch]
88
89			Send bug reports to <bug-automake@gnu.org>."
90			exit 0
91			;;
92
93			-v\|--v\|--ve\|--ver\|--vers\|--versi\|--versio\|--version)
94			echo "missing $scriptversion (GNU Automake)"
95			exit 0
96			;;
97
98			-*)
99			echo 1>&2 "$0: Unknown \`$1' option"
100			echo 1>&2 "Try \`$0 --help' for more information"
101			exit 1
102			;;
103
104			esac
105
106			# Now exit if we have it, but it failed. Also exit now if we
107			# don't have it and --version was passed (most likely to detect
108			# the program).
109			case "$1" in
110			lex\|yacc)
111			# Not GNU programs, they don't have --version.
112			;;
113
114			tar)
115			if test -n "$run"; then
116			echo 1>&2 "ERROR: \`tar' requires --run"
117			exit 1
118			elif test "x$2" = "x--version" \|\| test "x$2" = "x--help"; then
119			exit 1
120			fi
121			;;
122
123			*)
124			if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
125			# We have it, but it failed.
126			exit 1
127			elif test "x$2" = "x--version" \|\| test "x$2" = "x--help"; then
128			# Could not run --version or --help. This is probably someone
129			# running `$TOOL --version' or `$TOOL --help' to check whether
130			# $TOOL exists and not knowing $TOOL uses missing.
131			exit 1
132			fi
133			;;
134			esac
135
136			# If it does not exist, or fails to run (possibly an outdated version),
137			# try to emulate it.
138			case "$1" in
139			aclocal*)
140			echo 1>&2 "\
141			WARNING: \`$1' is $msg. You should only need it if
142			you modified \`acinclude.m4' or \`${configure_ac}'. You might want
143			to install the \`Automake' and \`Perl' packages. Grab them from
144			any GNU archive site."
145			touch aclocal.m4
146			;;
147
148			autoconf)
149			echo 1>&2 "\
150			WARNING: \`$1' is $msg. You should only need it if
151			you modified \`${configure_ac}'. You might want to install the
152			\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
153			archive site."
154			touch configure
155			;;
156
157			autoheader)
158			echo 1>&2 "\
159			WARNING: \`$1' is $msg. You should only need it if
160			you modified \`acconfig.h' or \`${configure_ac}'. You might want
161			to install the \`Autoconf' and \`GNU m4' packages. Grab them
162			from any GNU archive site."
163			files=`sed -n 's/^[ ]A[CM]_CONFIG_HEADER(\([^)]\)).*/\1/p' ${configure_ac}`
164			test -z "$files" && files="config.h"
165			touch_files=
166			for f in $files; do
167			case "$f" in
168			:) touch_files="$touch_files "`echo "$f" \|
169			sed -e 's/^[^:]://' -e 's/:.//'`;;
170			*) touch_files="$touch_files $f.in";;
171			esac
172			done
173			touch $touch_files
174			;;
175
176			automake*)
177			echo 1>&2 "\
178			WARNING: \`$1' is $msg. You should only need it if
179			you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
180			You might want to install the \`Automake' and \`Perl' packages.
181			Grab them from any GNU archive site."
182			find . -type f -name Makefile.am -print \|
183			sed 's/\.am$/.in/' \|
184			while read f; do touch "$f"; done
185			;;
186
187			autom4te)
188			echo 1>&2 "\
189			WARNING: \`$1' is needed, but is $msg.
190			You might have modified some files without having the
191			proper tools for further handling them.
192			You can get \`$1' as part of \`Autoconf' from any GNU
193			archive site."
194
195			file=`echo "$" \| sed -n 's/.--output[ =]\([^ ]\).*/\1/p'`
196			test -z "$file" && file=`echo "$" \| sed -n 's/.-o[ ]\([^ ]\).*/\1/p'`
197			if test -f "$file"; then
198			touch $file
199			else
200			test -z "$file" \|\| exec >$file
201			echo "#! /bin/sh"
202			echo "# Created by GNU Automake missing as a replacement of"
203			echo "# $ $@"
204			echo "exit 0"
205			chmod +x $file
206			exit 1
207			fi
208			;;
209
210			bison\|yacc)
211			echo 1>&2 "\
212			WARNING: \`$1' $msg. You should only need it if
213			you modified a \`.y' file. You may need the \`Bison' package
214			in order for those modifications to take effect. You can get
215			\`Bison' from any GNU archive site."
216			rm -f y.tab.c y.tab.h
217			if [ $# -ne 1 ]; then
218			eval LASTARG="\${$#}"
219			case "$LASTARG" in
220			*.y)
221			SRCFILE=`echo "$LASTARG" \| sed 's/y$/c/'`
222			if [ -f "$SRCFILE" ]; then
223			cp "$SRCFILE" y.tab.c
224			fi
225			SRCFILE=`echo "$LASTARG" \| sed 's/y$/h/'`
226			if [ -f "$SRCFILE" ]; then
227			cp "$SRCFILE" y.tab.h
228			fi
229			;;
230			esac
231			fi
232			if [ ! -f y.tab.h ]; then
233			echo >y.tab.h
234			fi
235			if [ ! -f y.tab.c ]; then
236			echo 'main() { return 0; }' >y.tab.c
237			fi
238			;;
239
240			lex\|flex)
241			echo 1>&2 "\
242			WARNING: \`$1' is $msg. You should only need it if
243			you modified a \`.l' file. You may need the \`Flex' package
244			in order for those modifications to take effect. You can get
245			\`Flex' from any GNU archive site."
246			rm -f lex.yy.c
247			if [ $# -ne 1 ]; then
248			eval LASTARG="\${$#}"
249			case "$LASTARG" in
250			*.l)
251			SRCFILE=`echo "$LASTARG" \| sed 's/l$/c/'`
252			if [ -f "$SRCFILE" ]; then
253			cp "$SRCFILE" lex.yy.c
254			fi
255			;;
256			esac
257			fi
258			if [ ! -f lex.yy.c ]; then
259			echo 'main() { return 0; }' >lex.yy.c
260			fi
261			;;
262
263			help2man)
264			echo 1>&2 "\
265			WARNING: \`$1' is $msg. You should only need it if
266			you modified a dependency of a manual page. You may need the
267			\`Help2man' package in order for those modifications to take
268			effect. You can get \`Help2man' from any GNU archive site."
269
270			file=`echo "$" \| sed -n 's/.-o \([^ ]\)./\1/p'`
271			if test -z "$file"; then
272			file=`echo "$" \| sed -n 's/.--output=\([^ ]\)./\1/p'`
273			fi
274			if [ -f "$file" ]; then
275			touch $file
276			else
277			test -z "$file" \|\| exec >$file
278			echo ".ab help2man is required to generate this page"
279			exit 1
280			fi
281			;;
282
283			makeinfo)
284			echo 1>&2 "\
285			WARNING: \`$1' is $msg. You should only need it if
286			you modified a \`.texi' or \`.texinfo' file, or any other file
287			indirectly affecting the aspect of the manual. The spurious
288			call might also be the consequence of using a buggy \`make' (AIX,
289			DU, IRIX). You might want to install the \`Texinfo' package or
290			the \`GNU make' package. Grab either from any GNU archive site."
291			file=`echo "$" \| sed -n 's/.-o \([^ ]\)./\1/p'`
292			if test -z "$file"; then
293			file=`echo "$" \| sed 's/. \([^ ]\) $/\1/'`
294			file=`sed -n '/^@setfilename/ { s/.* \([^ ]\) $/\1/; p; q; }' $file`
295			fi
296			touch $file
297			;;
298
299			tar)
300			shift
301
302			# We have already tried tar in the generic part.
303			# Look for gnutar/gtar before invocation to avoid ugly error
304			# messages.
305			if (gnutar --version > /dev/null 2>&1); then
306			gnutar "$@" && exit 0
307			fi
308			if (gtar --version > /dev/null 2>&1); then
309			gtar "$@" && exit 0
310			fi
311			firstarg="$1"
312			if shift; then
313			case "$firstarg" in
314			o)
315			firstarg=`echo "$firstarg" \| sed s/o//`
316			tar "$firstarg" "$@" && exit 0
317			;;
318			esac
319			case "$firstarg" in
320			h)
321			firstarg=`echo "$firstarg" \| sed s/h//`
322			tar "$firstarg" "$@" && exit 0
323			;;
324			esac
325			fi
326
327			echo 1>&2 "\
328			WARNING: I can't seem to be able to run \`tar' with the given arguments.
329			You may want to install GNU tar or Free paxutils, or check the
330			command line arguments."
331			exit 1
332			;;
333
334			*)
335			echo 1>&2 "\
336			WARNING: \`$1' is needed, and is $msg.
337			You might have modified some files without having the
338			proper tools for further handling them. Check the \`README' file,
339			it often tells you about the needed prerequisites for installing
340			this package. You may also peek at any GNU archive site, in case
341			some other package would contain this missing \`$1' program."
342			exit 1
343			;;
344			esac
345
346			exit 0
347
348			# Local variables:
349			# eval: (add-hook 'write-file-hooks 'time-stamp)
350			# time-stamp-start: "scriptversion="
351			# time-stamp-format: "%:y-%02m-%02d.%02H"
352			# time-stamp-end: "$"
353			# End: