[ViewVC] Annotation of: cvs/gvpe/NEWS

GVPE NEWS

        - INCOMPATIBLE CHANGE: no longer enable udp protocol if no other
          protocols are enabled - this is necessary when you have nodes with
          completely unknown protocols, to force mediated connection requests.
        - INCOMPATIBLE CHANGE: dns transport protocol bumped to version 2.
        - configure didn't detect openssl 1.0 because SHA1_version became private
          (patch by TANIGUCHI Takaki).
        - core protocol version 0.1, compatible with older releases.
        - fix a bug where nodes would tell the other side that it supports
          the same protocols as that other side, instead of its own.
        - add zlib when found, as openssl depends on it in newer versions.
        - work around append-bugs in uclibc by using an extra seek.
        - new "include" directive for the config file.
        - gvpectrl no longer evaluates any "on" directives.
        - icmp and rawip protocols weren't upgradable to each other.
        - major, but incremental, dns transport improvements:
           - do not simply abort in some error cases in the dns transport,
             but try to recover.
           - allow lowercase/uppercase alises for base-n encodings that do
             not rely on case.
           - use base26 instead of base22 encoding for dns syn's, and
             base36 instead of base22 for headers (saves one byte/packet).
           - back off far quicker in dns tunnel when idling - increases
             latency on an idle link somewhat, but avoids hundreds of
             needless packets.
           - poll more aggressively when idling in dns (poll once per
             second as opposed to once per 5 seconds).
           - reduce dns send payload size to allow greater rate of ack
             messages (should help sack and ipv6).
        - allow for ip options in rawip/icmp transports, even though gvpe
          doesn't generate them.
        - upgrade to libev 4 API.

2.24 Sat Feb 12 05:15:48 CET 2011
        - protocol version 0.1, compatible with older releases.
        - due to a bug, when packets were lost, a connection could go into a
          state where a ping/connection request from another node would be
          ignored, leading to connections not being re-established.
        - due to a bug, compression was almost always enabled.
        - enable-max-mtu was actually enable-mtu, contrary to documentation.
        - add nfmark support.
        - add node-change script support.
        - new DESTSI variable for node-xxx scripts.
        - updated codingstyle a bit, declared truly static stuff as static.
        - clarify compression docs.

2.22 Sun Feb  1 17:25:28 CET 2009
        - protocol version 0.1, compatible with older releases.
        - enabled icmp/tcp/http-proxy protocols by default.
        - updated copyright in program greetings.
        - fix some configure messages.
        - updated to libev 3.52.

2.21 Wed Sep  3 06:56:27 CEST 2008
        - protocol version 0.1, compatible with older releases.
        - add missing ev++.h include header to tarball, which everybody
          who tested it apparently had in their include path :(. Caught
          by Karl Kleinpaste and Marcus Kong.

2.2  Mon Sep  1 06:28:09 CEST 2008
        - protocol version 0.1, compatible with older releases.
          but upgrade is recommended to due changed ondemand behaviour.
        - new per-node options max-ttl and max-queue.
        - convert from iom.C to libev, a high-performance event loop
          (http://software.schmorp.de/pkg/libev).
        - tcp connections were leaking in some cases.
        - retry more aggressively (once/s) to establish a connection if
          new packets arrive for it.
        - save a lot of setsockopt calls when the tos doesn't change.
        - honor disabled even on initial connect attempt.
        - changed callback mechanism to be slightly less portable
          but more efficient mechanism (standards-compliant c++ compilers
          should work).
        - increased receive window positive size, to allow for massive
          packet loss due to occasional longer drop-outs.
        - send RST when a positive window size violation is detected, but
          not in other cases, to reconnect more quickly.
        - upgraded liblzf to version 3.4.
        - dropped -fno-exceptions due to ev++.h using it.
        - node-up/down scripts are now run in sequence.
        - new -q switch for gvpectrl, for when you run it often.
        - work around the horribly inconsistent, ad-hoc, ever-changing
          and broken texinfo syntax. YMMV. avoid texinfo.
        - keepalive is more aggressive now, sensding ping's every 3 seconds
          and killing the conenction after 15 seconds.
        - bugfixes.

2.01 Thu Mar 29 19:26:04 CEST 2007
        - protocol version 0.1, compatible with older releases.
        - bugfix of callback.h, might have cause callback return values to
          be corrupted on architectures like sparc before.
        - dns transport retries more aggressively.
        - updated documentation, improved dns transport reliability
          and throughput.
        - added experimental support for sha256 and sha512 digests.

2.0 Mon Dec  5 13:59:26 CET 2005
        - protocol version 0.1, compatible with older releases.
        - implement allow-direct, deny-direct node config statements.
        - implemented != for sockinfo. This fixes a bug where
          gvpe sent packets to the old ip address of another host
          even though it had received packets from it's new address.
          This only causes problems if you forget to -HUP your gvpe after
          your ip address changed, which is *required*.
        - sets close-on-exec flag on tcp connections. This fixes a bug
          where child processes kept tcp connections open and caused
          connections to fail when only one side can connect.
        - fixed a bug in receive sequence checking that made gvpe
          accept out-of-window packets in most cases.
        - tighter limit for the maximum sequence # to avoid overflow
          conditions + allow more headroom for packet reordering.
        - replace some asserts that trapped config mismatches by
          more useful log messages.
        - fix spurious extra newline in some log messages.

1.9 Tue Apr 19 06:21:50 CEST 2005
        - protocol version 0.1, compatible with older releases.
        - WARNING: this version checks the return value of if-up etc.
          scripts and exits on failure.
        - IMPORTANT: run if-up/node-up etc. scripts via /bin/sh.
        - IMPORTANT: interface initialization (MAC, MTU) is now done
          automatically in most configurations.
        - options can now be specified on the gvpe command line, too.
        - make some DNS transport values configurable and document them.
        - improved OS specific information in gvpe.osdep(5).
        - new tap device type "native/darwin", that supports the tap
          driver available for darwin (thanks to matthew mead who tested
          it out with me in a long session). tincd/darwin is still available.
        - new device type "tincd/bsd", which is a newer version of the
          *bsd-drivers taken from tinc.
        - fixed a bug in relying on the order of global construction
          when tcp transport was enabled. The fix makes it use no
          cpu time unless it is in use, too.
        - information about other nodes is now available to if-up etc. scripts.
        - the value of the config variable if-up-data is passed to the if-up
          etc. scripts.
        - skip unparsable config lines with a warning instead of stopping
          parsing and continuing with a certainly unusable config.

1.8 Fri Mar 18 00:58:55 CET 2005
        - protocol version 0.1, compatible with older releases.
        - enable-udp = yes is now default only when no other protocols
          are enabled. otherwise it is disabled unless explicitly enabled.
        - implemented dns tunneling (experimental now and in the future).
        - remove support for pre-release version protocol.
        - updated tincd drivers (rev 1433), added uml_socket driver, documented
          tincd drivers a bit better.
        - document icmp configuration values.
        - document transport protocols in gvpe.protocol(7).
        - remove unused ChangeLog file.
        - created a mailinglist at gvpe@lists.schmorp.de.
        - added an exemption to allow distribution of binaries linked against
          OpenSSL, as suggested by Guus Sliepen (author of tinc). No
          GNUTLS conversion in sight.
        - some portability fixes with respect to --disable-nls.

1.7 Tue Feb 22 23:58:59 CET 2005
        - protocol version 0.1, compatible with older releases.
        - first gnu release.
        - documented the special value 1 for router-priority.
        - renamed vped => gvpe and vpectrl => gvpectrl, as well as
          vped.conf => gvpe.conf.
        - new per-node option "max-retry".
        - asymmetric rekeying behaviour, so hosts don't rekey simultaneously.
        - new configure option --enable-static-daemon.
        - fix configure --help output.
        - many documentation layout fixes.
        - synced iom.[Ch] from rxvt-unicode.
        - try to cope with some non-monotonic time changes.
        - revert to locale.h - a usual, clocale is nonfunctioning on macosx.
        - considerably improved pod2texi and the resulting texi doc.

1.6.1 Wed May 12 14:48:20 CEST 2004
        - protocol version 0.1, compatible with older releases.
        - fix -c switch that has been broken due to a last-minute fix
          to option and config file parsing.

1.6 Mon May 10 20:55:10 CEST 2004
        - protocol version 0.1, compatible with older releases.
        - do not RESET on out-of-sequence packets (good for wireless).
        - various non-security-related bugfixes.
        - c++ify (at least make it compile with g++-3.4, which should make
          it a little bit more standard c++).

1.5 Fri Jan 30 00:50:04 CET 2004
        - protocol version 0.1, compatible with older releases.
        - vped will refuse to start when hostkey and public key do not match.
        - updated lzf code to version 1.2.
        - better error reporting for "unusual" conditions, like failing
          to allocate memory, that should not normally happen and
          will otherwise result in spurious other error messages. Also
          adds paranoid checks in case openssl's API changes in a bad way.
        - fix a bug where queued vpn packets were cleared to zero. while
          this doesn't affect security, it did cause warning messages and
          unnecessary connectivity delays.

1.4 Sat Jan 17 15:49:21 CET 2004
        - protocol version 0.1, compatible with older releases.
        - better retry behaviour on key mismatch.
        - use select-based io_manager instead of poll-based one.
        - share io manager between rxvt-unicode and vpe.
        - sooo many *BSD workarounds because no BSD I could find is even
          remotely POSIX-compatible.

1.2 Fri Oct 17 03:44:44 CEST 2003
        - protocol version 0.1.
        - tincd kernel interface code imported, more supported platforms
          (native/linux (2.4), tincd/linux (2.2 and 2.4), tincd/freebsd,
          native/cygwin).
        - added primitive ethernet emulation (ipv4 only), which allows
          the following platforms that only have tun drivers to work:
          /* none yet tested */
        - portability workarounds, especially for unfriendly freebsd
        - very minor bugfixes
        - warnings when choosing insecure ciphers/hashes
        - reduced default hmac length to 8.
        - cvs now contains configure, Makefile.in and other generated files.
        - added doc/complex-example to the distribution.

1.0 distant past
        - protocol version 0.1.
        - tweaked various timeouts to help very slow (486) class
          machines or nets with many hosts.
        - tweaked rate-limiting to be more forgiving for hosts
          connecting through routers (not a fix).

Revision:	1.104
Committed:	Tue Oct 18 10:54:17 2011 UTC (12 years, 6 months ago) by root
Branch:	MAIN
Changes since 1.103:	+2 -0 lines
Log Message:	* empty log message *
#	User	Rev	Content
1	pcg	1.83	GVPE NEWS
2	pcg	1.57
3	root	1.97	- INCOMPATIBLE CHANGE: no longer enable udp protocol if no other
4			protocols are enabled - this is necessary when you have nodes with
5			completely unknown protocols, to force mediated connection requests.
6	root	1.99	- INCOMPATIBLE CHANGE: dns transport protocol bumped to version 2.
7	root	1.102	- configure didn't detect openssl 1.0 because SHA1_version became private
8			(patch by TANIGUCHI Takaki).
9	root	1.99	- core protocol version 0.1, compatible with older releases.
10	root	1.97	- fix a bug where nodes would tell the other side that it supports
11			the same protocols as that other side, instead of its own.
12	root	1.98	- add zlib when found, as openssl depends on it in newer versions.
13			- work around append-bugs in uclibc by using an extra seek.
14	root	1.99	- new "include" directive for the config file.
15	root	1.100	- gvpectrl no longer evaluates any "on" directives.
16	root	1.102	- icmp and rawip protocols weren't upgradable to each other.
17	root	1.99	- major, but incremental, dns transport improvements:
18			- do not simply abort in some error cases in the dns transport,
19			but try to recover.
20			- allow lowercase/uppercase alises for base-n encodings that do
21			not rely on case.
22			- use base26 instead of base22 encoding for dns syn's, and
23			base36 instead of base22 for headers (saves one byte/packet).
24			- back off far quicker in dns tunnel when idling - increases
25			latency on an idle link somewhat, but avoids hundreds of
26			needless packets.
27			- poll more aggressively when idling in dns (poll once per
28			second as opposed to once per 5 seconds).
29	root	1.104	- reduce dns send payload size to allow greater rate of ack
30			messages (should help sack and ipv6).
31	root	1.103	- allow for ip options in rawip/icmp transports, even though gvpe
32			doesn't generate them.
33	root	1.101	- upgrade to libev 4 API.
34	root	1.97
35			2.24 Sat Feb 12 05:15:48 CET 2011
36			- protocol version 0.1, compatible with older releases.
37	root	1.95	- due to a bug, when packets were lost, a connection could go into a
38	root	1.94	state where a ping/connection request from another node would be
39	root	1.96	ignored, leading to connections not being re-established.
40	pcg	1.93	- due to a bug, compression was almost always enabled.
41	pcg	1.92	- enable-max-mtu was actually enable-mtu, contrary to documentation.
42	pcg	1.90	- add nfmark support.
43	pcg	1.91	- add node-change script support.
44			- new DESTSI variable for node-xxx scripts.
45	root	1.95	- updated codingstyle a bit, declared truly static stuff as static.
46	root	1.96	- clarify compression docs.
47	pcg	1.90
48	pcg	1.89	2.22 Sun Feb 1 17:25:28 CET 2009
49	root	1.97	- protocol version 0.1, compatible with older releases.
50	pcg	1.86	- enabled icmp/tcp/http-proxy protocols by default.
51	pcg	1.85	- updated copyright in program greetings.
52	pcg	1.86	- fix some configure messages.
53	pcg	1.87	- updated to libev 3.52.
54	pcg	1.85
55	pcg	1.84	2.21 Wed Sep 3 06:56:27 CEST 2008
56	root	1.97	- protocol version 0.1, compatible with older releases.
57	pcg	1.84	- add missing ev++.h include header to tarball, which everybody
58			who tested it apparently had in their include path :(. Caught
59	pcg	1.85	by Karl Kleinpaste and Marcus Kong.
60	pcg	1.84
61	pcg	1.83	2.2 Mon Sep 1 06:28:09 CEST 2008
62	root	1.97	- protocol version 0.1, compatible with older releases.
63	pcg	1.78	but upgrade is recommended to due changed ondemand behaviour.
64			- new per-node options max-ttl and max-queue.
65	pcg	1.72	- convert from iom.C to libev, a high-performance event loop
66	pcg	1.71	(http://software.schmorp.de/pkg/libev).
67	pcg	1.73	- tcp connections were leaking in some cases.
68	pcg	1.78	- retry more aggressively (once/s) to establish a connection if
69			new packets arrive for it.
70	pcg	1.75	- save a lot of setsockopt calls when the tos doesn't change.
71	pcg	1.78	- honor disabled even on initial connect attempt.
72	pcg	1.76	- changed callback mechanism to be slightly less portable
73			but more efficient mechanism (standards-compliant c++ compilers
74			should work).
75	pcg	1.80	- increased receive window positive size, to allow for massive
76			packet loss due to occasional longer drop-outs.
77			- send RST when a positive window size violation is detected, but
78			not in other cases, to reconnect more quickly.
79	pcg	1.83	- upgraded liblzf to version 3.4.
80	pcg	1.77	- dropped -fno-exceptions due to ev++.h using it.
81	pcg	1.81	- node-up/down scripts are now run in sequence.
82			- new -q switch for gvpectrl, for when you run it often.
83	pcg	1.82	- work around the horribly inconsistent, ad-hoc, ever-changing
84			and broken texinfo syntax. YMMV. avoid texinfo.
85	pcg	1.83	- keepalive is more aggressive now, sensding ping's every 3 seconds
86			and killing the conenction after 15 seconds.
87	pcg	1.71	- bugfixes.
88
89	pcg	1.70	2.01 Thu Mar 29 19:26:04 CEST 2007
90	pcg	1.69	- protocol version 0.1, compatible with older releases.
91	pcg	1.68	- bugfix of callback.h, might have cause callback return values to
92			be corrupted on architectures like sparc before.
93	pcg	1.69	- dns transport retries more aggressively.
94	pcg	1.70	- updated documentation, improved dns transport reliability
95			and throughput.
96			- added experimental support for sha256 and sha512 digests.
97	pcg	1.67
98	pcg	1.66	2.0 Mon Dec 5 13:59:26 CET 2005
99	pcg	1.56	- protocol version 0.1, compatible with older releases.
100	pcg	1.65	- implement allow-direct, deny-direct node config statements.
101	pcg	1.59	- implemented != for sockinfo. This fixes a bug where
102			gvpe sent packets to the old ip address of another host
103			even though it had received packets from it's new address.
104	pcg	1.61	This only causes problems if you forget to -HUP your gvpe after
105	pcg	1.59	your ip address changed, which is required.
106	pcg	1.64	- sets close-on-exec flag on tcp connections. This fixes a bug
107			where child processes kept tcp connections open and caused
108			connections to fail when only one side can connect.
109			- fixed a bug in receive sequence checking that made gvpe
110			accept out-of-window packets in most cases.
111	pcg	1.61	- tighter limit for the maximum sequence # to avoid overflow
112			conditions + allow more headroom for packet reordering.
113	pcg	1.66	- replace some asserts that trapped config mismatches by
114	pcg	1.62	more useful log messages.
115	pcg	1.63	- fix spurious extra newline in some log messages.
116	pcg	1.56
117	pcg	1.55	1.9 Tue Apr 19 06:21:50 CEST 2005
118	pcg	1.56	- protocol version 0.1, compatible with older releases.
119	pcg	1.49	- WARNING: this version checks the return value of if-up etc.
120			scripts and exits on failure.
121	pcg	1.50	- IMPORTANT: run if-up/node-up etc. scripts via /bin/sh.
122			- IMPORTANT: interface initialization (MAC, MTU) is now done
123			automatically in most configurations.
124	pcg	1.54	- options can now be specified on the gvpe command line, too.
125	pcg	1.49	- make some DNS transport values configurable and document them.
126			- improved OS specific information in gvpe.osdep(5).
127	pcg	1.51	- new tap device type "native/darwin", that supports the tap
128	pcg	1.45	driver available for darwin (thanks to matthew mead who tested
129	pcg	1.47	it out with me in a long session). tincd/darwin is still available.
130	pcg	1.51	- new device type "tincd/bsd", which is a newer version of the
131			*bsd-drivers taken from tinc.
132	pcg	1.46	- fixed a bug in relying on the order of global construction
133			when tcp transport was enabled. The fix makes it use no
134			cpu time unless it is in use, too.
135	pcg	1.52	- information about other nodes is now available to if-up etc. scripts.
136			- the value of the config variable if-up-data is passed to the if-up
137			etc. scripts.
138	pcg	1.49	- skip unparsable config lines with a warning instead of stopping
139			parsing and continuing with a certainly unusable config.
140	pcg	1.43
141	pcg	1.41	1.8 Fri Mar 18 00:58:55 CET 2005
142	pcg	1.56	- protocol version 0.1, compatible with older releases.
143	pcg	1.36	- enable-udp = yes is now default only when no other protocols
144			are enabled. otherwise it is disabled unless explicitly enabled.
145	pcg	1.40	- implemented dns tunneling (experimental now and in the future).
146	pcg	1.39	- remove support for pre-release version protocol.
147	pcg	1.41	- updated tincd drivers (rev 1433), added uml_socket driver, documented
148			tincd drivers a bit better.
149	pcg	1.40	- document icmp configuration values.
150			- document transport protocols in gvpe.protocol(7).
151			- remove unused ChangeLog file.
152	pcg	1.41	- created a mailinglist at gvpe@lists.schmorp.de.
153			- added an exemption to allow distribution of binaries linked against
154			OpenSSL, as suggested by Guus Sliepen (author of tinc). No
155			GNUTLS conversion in sight.
156	pcg	1.42	- some portability fixes with respect to --disable-nls.
157	pcg	1.36
158	pcg	1.35	1.7 Tue Feb 22 23:58:59 CET 2005
159	pcg	1.32	- protocol version 0.1, compatible with older releases.
160	pcg	1.26	- first gnu release.
161	pcg	1.27	- documented the special value 1 for router-priority.
162	pcg	1.26	- renamed vped => gvpe and vpectrl => gvpectrl, as well as
163			vped.conf => gvpe.conf.
164	pcg	1.29	- new per-node option "max-retry".
165	pcg	1.22	- asymmetric rekeying behaviour, so hosts don't rekey simultaneously.
166	pcg	1.24	- new configure option --enable-static-daemon.
167	pcg	1.23	- fix configure --help output.
168	pcg	1.26	- many documentation layout fixes.
169	pcg	1.28	- synced iom.[Ch] from rxvt-unicode.
170	pcg	1.34	- try to cope with some non-monotonic time changes.
171	pcg	1.30	- revert to locale.h - a usual, clocale is nonfunctioning on macosx.
172	pcg	1.32	- considerably improved pod2texi and the resulting texi doc.
173	pcg	1.22
174	pcg	1.21	1.6.1 Wed May 12 14:48:20 CEST 2004
175	pcg	1.32	- protocol version 0.1, compatible with older releases.
176	pcg	1.22	- fix -c switch that has been broken due to a last-minute fix
177			to option and config file parsing.
178	pcg	1.21
179	pcg	1.20	1.6 Mon May 10 20:55:10 CEST 2004
180	pcg	1.22	- protocol version 0.1, compatible with older releases.
181			- do not RESET on out-of-sequence packets (good for wireless).
182			- various non-security-related bugfixes.
183			- c++ify (at least make it compile with g++-3.4, which should make
184			it a little bit more standard c++).
185	pcg	1.19
186	pcg	1.18	1.5 Fri Jan 30 00:50:04 CET 2004
187	pcg	1.22	- protocol version 0.1, compatible with older releases.
188			- vped will refuse to start when hostkey and public key do not match.
189			- updated lzf code to version 1.2.
190			- better error reporting for "unusual" conditions, like failing
191			to allocate memory, that should not normally happen and
192			will otherwise result in spurious other error messages. Also
193			adds paranoid checks in case openssl's API changes in a bad way.
194			- fix a bug where queued vpn packets were cleared to zero. while
195			this doesn't affect security, it did cause warning messages and
196			unnecessary connectivity delays.
197	pcg	1.15
198	pcg	1.13	1.4 Sat Jan 17 15:49:21 CET 2004
199	pcg	1.22	- protocol version 0.1, compatible with older releases.
200			- better retry behaviour on key mismatch.
201			- use select-based io_manager instead of poll-based one.
202			- share io manager between rxvt-unicode and vpe.
203			- sooo many *BSD workarounds because no BSD I could find is even
204			remotely POSIX-compatible.
205	pcg	1.11
206	pcg	1.10	1.2 Fri Oct 17 03:44:44 CEST 2003
207	pcg	1.22	- protocol version 0.1.
208			- tincd kernel interface code imported, more supported platforms
209			(native/linux (2.4), tincd/linux (2.2 and 2.4), tincd/freebsd,
210			native/cygwin).
211			- added primitive ethernet emulation (ipv4 only), which allows
212			the following platforms that only have tun drivers to work:
213			/* none yet tested */
214			- portability workarounds, especially for unfriendly freebsd
215			- very minor bugfixes
216			- warnings when choosing insecure ciphers/hashes
217			- reduced default hmac length to 8.
218			- cvs now contains configure, Makefile.in and other generated files.
219			- added doc/complex-example to the distribution.
220
221			1.0 distant past
222			- protocol version 0.1.
223			- tweaked various timeouts to help very slow (486) class
224			machines or nets with many hosts.
225			- tweaked rate-limiting to be more forgiving for hosts
226			connecting through routers (not a fix).
227	pcg	1.2