[ViewVC] Annotation of: cvs/gvpe/NEWS

GVPE NEWS

TODO: bridge mode, finally?
TODO: gcm mode?
TODO: replace ripemd160 as the only authentication hash.
TODO: increase rsa size.
TODO: replace transport bits by transport endpoint structs?
TODO: ecdh to avoid session replay attacks
TODO: http://incog-izick.blogspot.de/2011/08/using-openssl-aes-gcm.html
TODO: http://stackoverflow.com/questions/12153009/openssl-c-example-of-aes-gcm-using-evp-interfaces

proposed: 3 types, req, resreq, res

req (hmac1) rsa(seqno1 hmac1 aes1 seqno2 hmac2 aes2 auth) ecdh1
res (hmac1) hash(rsa-contents) ecdh2

req hmac0(*) rsa(seqno hmac0 hmac aes auth) hkdf-salt ecdh1
res hmac0(rsa-contents ecdh2)
   hmac_key = hkdf(hkdf-salt, hmac | ecdh)
   aes_key  = hkdf(hkdf-salt, aes  | ecdh)

TODO: protocol magic fixen(!!!)
TODO: "global"
TODO: verify
TODO: make sense of overhead calculation
TODO: if-up &c should not be scripts?
        - INCOMPATIBLE CHANGE: core protocol version 1.0.
        - INCOMPATIBLE CHANGE: node sextions are now introduced
          with "node nodename", not "node = nodename".
        - while individual packets couldn't be replayed, a whole session
          could be replayed - this has been fixed by an extra key exchange.
        - in addition to rsa key exchange and authentication, the handshake now
          adds a diffie-hellman key exchange (using curve25119) for perfect
          forward secrecy. mac and cipher keys are derived using HKDF.
        - rsa key sizes are now configurable and larger (default is 3072).
          correspondingly, the minimum mtu is no longer 296 but 576.
        - fixed a potential (unverified) buffer overrun on rsa decryption.
        - router reconnects could cause excessive rekeying on other connections.
        - gvpectrl no longer generates all missing public keys, but
          only missing private keys. private keys are also put
          into the configured location.
        - the pid-file now accepts %s as nodename as elsewhere.
        - no longer use RAND_bytes to generate session keys - you NEED
          a real source of entropy now (e.g. egd or /dev/random - see the
          openssl documentation).
        - multiple node statements for the same node are now supported
          and will be merged.
        - a new directive "global" switches back to the global section
          of the config file.
        - 12 random prefix bytes are now properly supported, leading to
          a fully random IV.
        - use aes with a random key in counter-mode to generate IVs,
          for speed reasons (generating 12 random bytes with openssl can
          take longer than encrypting and mac'ing a 1.5kb packet, and IVs
          do not need to be cryptographically strong random numbers
          (and in fact, shouldn't be)).
        - if-up scripts can now be specified with absolute paths.
        - new global option: serial, to detect configuration mismatches.
        - use HKDF as authentication proof, not HMAC or a plain hash
          (hint by Ilmari Karonen).
        - during rekeying or conenction establishments, hmac authentication
          errors could occur and reset the connection. Transient hmac
          authentication errors are now being ignored for 3 seconds.
        - log the reason for a conneciton loss.
          
2.25 Sat Jul 13 06:42:33 CEST 2013
        - INCOMPATIBLE CHANGE: no longer enable udp protocol if no other
          protocols are enabled - this is necessary when you have nodes with
          completely unknown protocols, to force mediated connection requests.
        - INCOMPATIBLE CHANGE: dns transport protocol bumped to version 2.
        - core protocol version 0.1, compatible with older releases.
        - switch to using RSA_generate_key_ex, which is the badly documented
          and needlessly more complicated replacement for the RSA_generate_key
          function which is now deprecated.
        - support additional hmac hashes: sha256 and sha512, usually truncated.
        - change public exponent for rsa keys from 65535 to 65537, for
          efficiency reasons - only affects new keys.
        - nodes would sometimes declare transport endpoints valid despite
          the protocol not being configured locally.
        - new global configuration options: chroot, chuser, chuid, chgid,
          to chroot to a specified or anonymous new root, and change user id.
        - new global configuration options seed_device and seed_interval,
          to configure another device than /dev/urandom for random seeds,
          and to configure a regular interval to reseed the rng.
        - prefer inet_aton over gethostbyname, as the latter is not guaranteed
          to "resolve" literal ip addresses.
        - configure didn't detect openssl 1.0 because SHA1_version became private
          (patch by TANIGUCHI Takaki).
        - fix a bug where nodes would tell the other side that it supports
          the same protocols as that other side, instead of its own.
        - add zlib when found, as openssl depends on it in newer versions.
        - work around append-bugs in uclibc by using an extra seek.
        - new "include" directive for the config file.
        - gvpectrl no longer evaluates any "on" directives.
        - icmp and rawip protocols weren't upgradable to each other.
        - major, but incremental, dns transport improvements:
           - do not simply abort in some error cases in the dns transport,
             but try to recover.
           - allow lowercase/uppercase aliases for base-n encodings that do
             not rely on case.
           - use base26 instead of base22 encoding for dns syn's, and
             base36 instead of base22 for headers (saves one byte/packet).
           - back off far quicker in dns tunnel when idling - increases
             latency on an idle link somewhat, but avoids hundreds of
             needless packets.
           - poll more aggressively when idling in dns (poll once per
             second as opposed to once per 5 seconds).
           - reduce dns send payload size to allow greater rate of ack
             messages (should help sack and ipv6).
        - allow for ip options in rawip/icmp transports, even though gvpe
          doesn't generate them.
        - upgrade to autoconf 2.69, automake 1.11.
        - upgrade to libev 4 API.
        - replace COPYING file by actual GPLv3 - files were relicensed to GPLv3
          earlier but COPYING was forgotten.

2.24 Sat Feb 12 05:15:48 CET 2011
        - protocol version 0.1, compatible with older releases.
        - due to a bug, when packets were lost, a connection could go into a
          state where a ping/connection request from another node would be
          ignored, leading to connections not being re-established.
        - due to a bug, compression was almost always enabled.
        - enable-max-mtu was actually enable-mtu, contrary to documentation.
        - add nfmark support.
        - add node-change script support.
        - new DESTSI variable for node-xxx scripts.
        - updated codingstyle a bit, declared truly static stuff as static.
        - clarify compression docs.

2.22 Sun Feb  1 17:25:28 CET 2009
        - protocol version 0.1, compatible with older releases.
        - enabled icmp/tcp/http-proxy protocols by default.
        - updated copyright in program greetings.
        - fix some configure messages.
        - updated to libev 3.52.

2.21 Wed Sep  3 06:56:27 CEST 2008
        - protocol version 0.1, compatible with older releases.
        - add missing ev++.h include header to tarball, which everybody
          who tested it apparently had in their include path :(. Caught
          by Karl Kleinpaste and Marcus Kong.

2.2  Mon Sep  1 06:28:09 CEST 2008
        - protocol version 0.1, compatible with older releases.
          but upgrade is recommended to due changed ondemand behaviour.
        - new per-node options max-ttl and max-queue.
        - convert from iom.C to libev, a high-performance event loop
          (http://software.schmorp.de/pkg/libev).
        - tcp connections were leaking in some cases.
        - retry more aggressively (once/s) to establish a connection if
          new packets arrive for it.
        - save a lot of setsockopt calls when the tos doesn't change.
        - honor disabled even on initial connect attempt.
        - changed callback mechanism to be slightly less portable
          but more efficient mechanism (standards-compliant c++ compilers
          should work).
        - increased receive window positive size, to allow for massive
          packet loss due to occasional longer drop-outs.
        - send RST when a positive window size violation is detected, but
          not in other cases, to reconnect more quickly.
        - upgraded liblzf to version 3.4.
        - dropped -fno-exceptions due to ev++.h using it.
        - node-up/down scripts are now run in sequence.
        - new -q switch for gvpectrl, for when you run it often.
        - work around the horribly inconsistent, ad-hoc, ever-changing
          and broken texinfo syntax. YMMV. avoid texinfo.
        - keepalive is more aggressive now, sensding ping's every 3 seconds
          and killing the conenction after 15 seconds.
        - bugfixes.

2.01 Thu Mar 29 19:26:04 CEST 2007
        - protocol version 0.1, compatible with older releases.
        - bugfix of callback.h, might have cause callback return values to
          be corrupted on architectures like sparc before.
        - dns transport retries more aggressively.
        - updated documentation, improved dns transport reliability
          and throughput.
        - added experimental support for sha256 and sha512 digests.

2.0 Mon Dec  5 13:59:26 CET 2005
        - protocol version 0.1, compatible with older releases.
        - implement allow-direct, deny-direct node config statements.
        - implemented != for sockinfo. This fixes a bug where
          gvpe sent packets to the old ip address of another host
          even though it had received packets from it's new address.
          This only causes problems if you forget to -HUP your gvpe after
          your ip address changed, which is *required*.
        - sets close-on-exec flag on tcp connections. This fixes a bug
          where child processes kept tcp connections open and caused
          connections to fail when only one side can connect.
        - fixed a bug in receive sequence checking that made gvpe
          accept out-of-window packets in most cases.
        - tighter limit for the maximum sequence # to avoid overflow
          conditions + allow more headroom for packet reordering.
        - replace some asserts that trapped config mismatches by
          more useful log messages.
        - fix spurious extra newline in some log messages.

1.9 Tue Apr 19 06:21:50 CEST 2005
        - protocol version 0.1, compatible with older releases.
        - WARNING: this version checks the return value of if-up etc.
          scripts and exits on failure.
        - IMPORTANT: run if-up/node-up etc. scripts via /bin/sh.
        - IMPORTANT: interface initialization (MAC, MTU) is now done
          automatically in most configurations.
        - options can now be specified on the gvpe command line, too.
        - make some DNS transport values configurable and document them.
        - improved OS specific information in gvpe.osdep(5).
        - new tap device type "native/darwin", that supports the tap
          driver available for darwin (thanks to matthew mead who tested
          it out with me in a long session). tincd/darwin is still available.
        - new device type "tincd/bsd", which is a newer version of the
          *bsd-drivers taken from tinc.
        - fixed a bug in relying on the order of global construction
          when tcp transport was enabled. The fix makes it use no
          cpu time unless it is in use, too.
        - information about other nodes is now available to if-up etc. scripts.
        - the value of the config variable if-up-data is passed to the if-up
          etc. scripts.
        - skip unparsable config lines with a warning instead of stopping
          parsing and continuing with a certainly unusable config.

1.8 Fri Mar 18 00:58:55 CET 2005
        - protocol version 0.1, compatible with older releases.
        - enable-udp = yes is now default only when no other protocols
          are enabled. otherwise it is disabled unless explicitly enabled.
        - implemented dns tunneling (experimental now and in the future).
        - remove support for pre-release version protocol.
        - updated tincd drivers (rev 1433), added uml_socket driver, documented
          tincd drivers a bit better.
        - document icmp configuration values.
        - document transport protocols in gvpe.protocol(7).
        - remove unused ChangeLog file.
        - created a mailinglist at gvpe@lists.schmorp.de.
        - added an exemption to allow distribution of binaries linked against
          OpenSSL, as suggested by Guus Sliepen (author of tinc). No
          GNUTLS conversion in sight.
        - some portability fixes with respect to --disable-nls.

1.7 Tue Feb 22 23:58:59 CET 2005
        - protocol version 0.1, compatible with older releases.
        - first gnu release.
        - documented the special value 1 for router-priority.
        - renamed vped => gvpe and vpectrl => gvpectrl, as well as
          vped.conf => gvpe.conf.
        - new per-node option "max-retry".
        - asymmetric rekeying behaviour, so hosts don't rekey simultaneously.
        - new configure option --enable-static-daemon.
        - fix configure --help output.
        - many documentation layout fixes.
        - synced iom.[Ch] from rxvt-unicode.
        - try to cope with some non-monotonic time changes.
        - revert to locale.h - a usual, clocale is nonfunctioning on macosx.
        - considerably improved pod2texi and the resulting texi doc.

1.6.1 Wed May 12 14:48:20 CEST 2004
        - protocol version 0.1, compatible with older releases.
        - fix -c switch that has been broken due to a last-minute fix
          to option and config file parsing.

1.6 Mon May 10 20:55:10 CEST 2004
        - protocol version 0.1, compatible with older releases.
        - do not RESET on out-of-sequence packets (good for wireless).
        - various non-security-related bugfixes.
        - c++ify (at least make it compile with g++-3.4, which should make
          it a little bit more standard c++).

1.5 Fri Jan 30 00:50:04 CET 2004
        - protocol version 0.1, compatible with older releases.
        - vped will refuse to start when hostkey and public key do not match.
        - updated lzf code to version 1.2.
        - better error reporting for "unusual" conditions, like failing
          to allocate memory, that should not normally happen and
          will otherwise result in spurious other error messages. Also
          adds paranoid checks in case openssl's API changes in a bad way.
        - fix a bug where queued vpn packets were cleared to zero. while
          this doesn't affect security, it did cause warning messages and
          unnecessary connectivity delays.

1.4 Sat Jan 17 15:49:21 CET 2004
        - protocol version 0.1, compatible with older releases.
        - better retry behaviour on key mismatch.
        - use select-based io_manager instead of poll-based one.
        - share io manager between rxvt-unicode and vpe.
        - sooo many *BSD workarounds because no BSD I could find is even
          remotely POSIX-compatible.

1.2 Fri Oct 17 03:44:44 CEST 2003
        - protocol version 0.1.
        - tincd kernel interface code imported, more supported platforms
          (native/linux (2.4), tincd/linux (2.2 and 2.4), tincd/freebsd,
          native/cygwin).
        - added primitive ethernet emulation (ipv4 only), which allows
          the following platforms that only have tun drivers to work:
          /* none yet tested */
        - portability workarounds, especially for unfriendly freebsd
        - very minor bugfixes
        - warnings when choosing insecure ciphers/hashes
        - reduced default hmac length to 8.
        - cvs now contains configure, Makefile.in and other generated files.
        - added doc/complex-example to the distribution.

1.0 distant past
        - protocol version 0.1.
        - tweaked various timeouts to help very slow (486) class
          machines or nets with many hosts.
        - tweaked rate-limiting to be more forgiving for hosts
          connecting through routers (not a fix).

Revision:	1.119
Committed:	Fri Oct 11 04:07:24 2013 UTC (10 years, 7 months ago) by root
Branch:	MAIN
Changes since 1.118:	+5 -0 lines
Log Message:	* empty log message *
#	User	Rev	Content
1	pcg	1.83	GVPE NEWS
2	pcg	1.57
3	root	1.106	TODO: bridge mode, finally?
4	root	1.112	TODO: gcm mode?
5			TODO: replace ripemd160 as the only authentication hash.
6			TODO: increase rsa size.
7	root	1.114	TODO: replace transport bits by transport endpoint structs?
8			TODO: ecdh to avoid session replay attacks
9			TODO: http://incog-izick.blogspot.de/2011/08/using-openssl-aes-gcm.html
10			TODO: http://stackoverflow.com/questions/12153009/openssl-c-example-of-aes-gcm-using-evp-interfaces
11
12			proposed: 3 types, req, resreq, res
13
14			req (hmac1) rsa(seqno1 hmac1 aes1 seqno2 hmac2 aes2 auth) ecdh1
15			res (hmac1) hash(rsa-contents) ecdh2
16
17			req hmac0(*) rsa(seqno hmac0 hmac aes auth) hkdf-salt ecdh1
18			res hmac0(rsa-contents ecdh2)
19			hmac_key = hkdf(hkdf-salt, hmac \| ecdh)
20			aes_key = hkdf(hkdf-salt, aes \| ecdh)
21
22	root	1.116	TODO: protocol magic fixen(!!!)
23			TODO: "global"
24			TODO: verify
25			TODO: make sense of overhead calculation
26	root	1.117	TODO: if-up &c should not be scripts?
27	root	1.114	- INCOMPATIBLE CHANGE: core protocol version 1.0.
28	root	1.116	- INCOMPATIBLE CHANGE: node sextions are now introduced
29			with "node nodename", not "node = nodename".
30	root	1.114	- while individual packets couldn't be replayed, a whole session
31			could be replayed - this has been fixed by an extra key exchange.
32			- in addition to rsa key exchange and authentication, the handshake now
33			adds a diffie-hellman key exchange (using curve25119) for perfect
34			forward secrecy. mac and cipher keys are derived using HKDF.
35			- rsa key sizes are now configurable and larger (default is 3072).
36			correspondingly, the minimum mtu is no longer 296 but 576.
37			- fixed a potential (unverified) buffer overrun on rsa decryption.
38	root	1.119	- router reconnects could cause excessive rekeying on other connections.
39	root	1.114	- gvpectrl no longer generates all missing public keys, but
40			only missing private keys. private keys are also put
41			into the configured location.
42			- the pid-file now accepts %s as nodename as elsewhere.
43	root	1.115	- no longer use RAND_bytes to generate session keys - you NEED
44			a real source of entropy now (e.g. egd or /dev/random - see the
45			openssl documentation).
46	root	1.116	- multiple node statements for the same node are now supported
47			and will be merged.
48			- a new directive "global" switches back to the global section
49			of the config file.
50			- 12 random prefix bytes are now properly supported, leading to
51			a fully random IV.
52			- use aes with a random key in counter-mode to generate IVs,
53			for speed reasons (generating 12 random bytes with openssl can
54			take longer than encrypting and mac'ing a 1.5kb packet, and IVs
55			do not need to be cryptographically strong random numbers
56			(and in fact, shouldn't be)).
57			- if-up scripts can now be specified with absolute paths.
58	root	1.117	- new global option: serial, to detect configuration mismatches.
59	root	1.118	- use HKDF as authentication proof, not HMAC or a plain hash
60			(hint by Ilmari Karonen).
61	root	1.119	- during rekeying or conenction establishments, hmac authentication
62			errors could occur and reset the connection. Transient hmac
63			authentication errors are now being ignored for 3 seconds.
64			- log the reason for a conneciton loss.
65	root	1.116
66	root	1.114	2.25 Sat Jul 13 06:42:33 CEST 2013
67	root	1.97	- INCOMPATIBLE CHANGE: no longer enable udp protocol if no other
68			protocols are enabled - this is necessary when you have nodes with
69			completely unknown protocols, to force mediated connection requests.
70	root	1.99	- INCOMPATIBLE CHANGE: dns transport protocol bumped to version 2.
71	root	1.112	- core protocol version 0.1, compatible with older releases.
72	root	1.110	- switch to using RSA_generate_key_ex, which is the badly documented
73	root	1.108	and needlessly more complicated replacement for the RSA_generate_key
74			function which is now deprecated.
75	root	1.112	- support additional hmac hashes: sha256 and sha512, usually truncated.
76	root	1.108	- change public exponent for rsa keys from 65535 to 65537, for
77	root	1.110	efficiency reasons - only affects new keys.
78	root	1.105	- nodes would sometimes declare transport endpoints valid despite
79			the protocol not being configured locally.
80	root	1.106	- new global configuration options: chroot, chuser, chuid, chgid,
81			to chroot to a specified or anonymous new root, and change user id.
82	root	1.112	- new global configuration options seed_device and seed_interval,
83			to configure another device than /dev/urandom for random seeds,
84	root	1.116	and to configure a regular interval to reseed the rng.
85	root	1.107	- prefer inet_aton over gethostbyname, as the latter is not guaranteed
86			to "resolve" literal ip addresses.
87	root	1.102	- configure didn't detect openssl 1.0 because SHA1_version became private
88			(patch by TANIGUCHI Takaki).
89	root	1.97	- fix a bug where nodes would tell the other side that it supports
90			the same protocols as that other side, instead of its own.
91	root	1.98	- add zlib when found, as openssl depends on it in newer versions.
92			- work around append-bugs in uclibc by using an extra seek.
93	root	1.99	- new "include" directive for the config file.
94	root	1.100	- gvpectrl no longer evaluates any "on" directives.
95	root	1.102	- icmp and rawip protocols weren't upgradable to each other.
96	root	1.99	- major, but incremental, dns transport improvements:
97			- do not simply abort in some error cases in the dns transport,
98			but try to recover.
99	root	1.116	- allow lowercase/uppercase aliases for base-n encodings that do
100	root	1.99	not rely on case.
101			- use base26 instead of base22 encoding for dns syn's, and
102			base36 instead of base22 for headers (saves one byte/packet).
103			- back off far quicker in dns tunnel when idling - increases
104			latency on an idle link somewhat, but avoids hundreds of
105			needless packets.
106			- poll more aggressively when idling in dns (poll once per
107			second as opposed to once per 5 seconds).
108	root	1.104	- reduce dns send payload size to allow greater rate of ack
109			messages (should help sack and ipv6).
110	root	1.103	- allow for ip options in rawip/icmp transports, even though gvpe
111			doesn't generate them.
112	root	1.113	- upgrade to autoconf 2.69, automake 1.11.
113	root	1.101	- upgrade to libev 4 API.
114	root	1.113	- replace COPYING file by actual GPLv3 - files were relicensed to GPLv3
115			earlier but COPYING was forgotten.
116	root	1.97
117			2.24 Sat Feb 12 05:15:48 CET 2011
118			- protocol version 0.1, compatible with older releases.
119	root	1.95	- due to a bug, when packets were lost, a connection could go into a
120	root	1.94	state where a ping/connection request from another node would be
121	root	1.96	ignored, leading to connections not being re-established.
122	pcg	1.93	- due to a bug, compression was almost always enabled.
123	pcg	1.92	- enable-max-mtu was actually enable-mtu, contrary to documentation.
124	pcg	1.90	- add nfmark support.
125	pcg	1.91	- add node-change script support.
126			- new DESTSI variable for node-xxx scripts.
127	root	1.95	- updated codingstyle a bit, declared truly static stuff as static.
128	root	1.96	- clarify compression docs.
129	pcg	1.90
130	pcg	1.89	2.22 Sun Feb 1 17:25:28 CET 2009
131	root	1.97	- protocol version 0.1, compatible with older releases.
132	pcg	1.86	- enabled icmp/tcp/http-proxy protocols by default.
133	pcg	1.85	- updated copyright in program greetings.
134	pcg	1.86	- fix some configure messages.
135	pcg	1.87	- updated to libev 3.52.
136	pcg	1.85
137	pcg	1.84	2.21 Wed Sep 3 06:56:27 CEST 2008
138	root	1.97	- protocol version 0.1, compatible with older releases.
139	pcg	1.84	- add missing ev++.h include header to tarball, which everybody
140			who tested it apparently had in their include path :(. Caught
141	pcg	1.85	by Karl Kleinpaste and Marcus Kong.
142	pcg	1.84
143	pcg	1.83	2.2 Mon Sep 1 06:28:09 CEST 2008
144	root	1.97	- protocol version 0.1, compatible with older releases.
145	pcg	1.78	but upgrade is recommended to due changed ondemand behaviour.
146			- new per-node options max-ttl and max-queue.
147	pcg	1.72	- convert from iom.C to libev, a high-performance event loop
148	pcg	1.71	(http://software.schmorp.de/pkg/libev).
149	pcg	1.73	- tcp connections were leaking in some cases.
150	pcg	1.78	- retry more aggressively (once/s) to establish a connection if
151			new packets arrive for it.
152	pcg	1.75	- save a lot of setsockopt calls when the tos doesn't change.
153	pcg	1.78	- honor disabled even on initial connect attempt.
154	pcg	1.76	- changed callback mechanism to be slightly less portable
155			but more efficient mechanism (standards-compliant c++ compilers
156			should work).
157	pcg	1.80	- increased receive window positive size, to allow for massive
158			packet loss due to occasional longer drop-outs.
159			- send RST when a positive window size violation is detected, but
160			not in other cases, to reconnect more quickly.
161	pcg	1.83	- upgraded liblzf to version 3.4.
162	pcg	1.77	- dropped -fno-exceptions due to ev++.h using it.
163	pcg	1.81	- node-up/down scripts are now run in sequence.
164			- new -q switch for gvpectrl, for when you run it often.
165	pcg	1.82	- work around the horribly inconsistent, ad-hoc, ever-changing
166			and broken texinfo syntax. YMMV. avoid texinfo.
167	pcg	1.83	- keepalive is more aggressive now, sensding ping's every 3 seconds
168			and killing the conenction after 15 seconds.
169	pcg	1.71	- bugfixes.
170
171	pcg	1.70	2.01 Thu Mar 29 19:26:04 CEST 2007
172	pcg	1.69	- protocol version 0.1, compatible with older releases.
173	pcg	1.68	- bugfix of callback.h, might have cause callback return values to
174			be corrupted on architectures like sparc before.
175	pcg	1.69	- dns transport retries more aggressively.
176	pcg	1.70	- updated documentation, improved dns transport reliability
177			and throughput.
178			- added experimental support for sha256 and sha512 digests.
179	pcg	1.67
180	pcg	1.66	2.0 Mon Dec 5 13:59:26 CET 2005
181	pcg	1.56	- protocol version 0.1, compatible with older releases.
182	pcg	1.65	- implement allow-direct, deny-direct node config statements.
183	pcg	1.59	- implemented != for sockinfo. This fixes a bug where
184			gvpe sent packets to the old ip address of another host
185			even though it had received packets from it's new address.
186	pcg	1.61	This only causes problems if you forget to -HUP your gvpe after
187	pcg	1.59	your ip address changed, which is required.
188	pcg	1.64	- sets close-on-exec flag on tcp connections. This fixes a bug
189			where child processes kept tcp connections open and caused
190			connections to fail when only one side can connect.
191			- fixed a bug in receive sequence checking that made gvpe
192			accept out-of-window packets in most cases.
193	pcg	1.61	- tighter limit for the maximum sequence # to avoid overflow
194			conditions + allow more headroom for packet reordering.
195	pcg	1.66	- replace some asserts that trapped config mismatches by
196	pcg	1.62	more useful log messages.
197	pcg	1.63	- fix spurious extra newline in some log messages.
198	pcg	1.56
199	pcg	1.55	1.9 Tue Apr 19 06:21:50 CEST 2005
200	pcg	1.56	- protocol version 0.1, compatible with older releases.
201	pcg	1.49	- WARNING: this version checks the return value of if-up etc.
202			scripts and exits on failure.
203	pcg	1.50	- IMPORTANT: run if-up/node-up etc. scripts via /bin/sh.
204			- IMPORTANT: interface initialization (MAC, MTU) is now done
205			automatically in most configurations.
206	pcg	1.54	- options can now be specified on the gvpe command line, too.
207	pcg	1.49	- make some DNS transport values configurable and document them.
208			- improved OS specific information in gvpe.osdep(5).
209	pcg	1.51	- new tap device type "native/darwin", that supports the tap
210	pcg	1.45	driver available for darwin (thanks to matthew mead who tested
211	pcg	1.47	it out with me in a long session). tincd/darwin is still available.
212	pcg	1.51	- new device type "tincd/bsd", which is a newer version of the
213			*bsd-drivers taken from tinc.
214	pcg	1.46	- fixed a bug in relying on the order of global construction
215			when tcp transport was enabled. The fix makes it use no
216			cpu time unless it is in use, too.
217	pcg	1.52	- information about other nodes is now available to if-up etc. scripts.
218			- the value of the config variable if-up-data is passed to the if-up
219			etc. scripts.
220	pcg	1.49	- skip unparsable config lines with a warning instead of stopping
221			parsing and continuing with a certainly unusable config.
222	pcg	1.43
223	pcg	1.41	1.8 Fri Mar 18 00:58:55 CET 2005
224	pcg	1.56	- protocol version 0.1, compatible with older releases.
225	pcg	1.36	- enable-udp = yes is now default only when no other protocols
226			are enabled. otherwise it is disabled unless explicitly enabled.
227	pcg	1.40	- implemented dns tunneling (experimental now and in the future).
228	pcg	1.39	- remove support for pre-release version protocol.
229	pcg	1.41	- updated tincd drivers (rev 1433), added uml_socket driver, documented
230			tincd drivers a bit better.
231	pcg	1.40	- document icmp configuration values.
232			- document transport protocols in gvpe.protocol(7).
233			- remove unused ChangeLog file.
234	pcg	1.41	- created a mailinglist at gvpe@lists.schmorp.de.
235			- added an exemption to allow distribution of binaries linked against
236			OpenSSL, as suggested by Guus Sliepen (author of tinc). No
237			GNUTLS conversion in sight.
238	pcg	1.42	- some portability fixes with respect to --disable-nls.
239	pcg	1.36
240	pcg	1.35	1.7 Tue Feb 22 23:58:59 CET 2005
241	pcg	1.32	- protocol version 0.1, compatible with older releases.
242	pcg	1.26	- first gnu release.
243	pcg	1.27	- documented the special value 1 for router-priority.
244	pcg	1.26	- renamed vped => gvpe and vpectrl => gvpectrl, as well as
245			vped.conf => gvpe.conf.
246	pcg	1.29	- new per-node option "max-retry".
247	pcg	1.22	- asymmetric rekeying behaviour, so hosts don't rekey simultaneously.
248	pcg	1.24	- new configure option --enable-static-daemon.
249	pcg	1.23	- fix configure --help output.
250	pcg	1.26	- many documentation layout fixes.
251	pcg	1.28	- synced iom.[Ch] from rxvt-unicode.
252	pcg	1.34	- try to cope with some non-monotonic time changes.
253	pcg	1.30	- revert to locale.h - a usual, clocale is nonfunctioning on macosx.
254	pcg	1.32	- considerably improved pod2texi and the resulting texi doc.
255	pcg	1.22
256	pcg	1.21	1.6.1 Wed May 12 14:48:20 CEST 2004
257	pcg	1.32	- protocol version 0.1, compatible with older releases.
258	pcg	1.22	- fix -c switch that has been broken due to a last-minute fix
259			to option and config file parsing.
260	pcg	1.21
261	pcg	1.20	1.6 Mon May 10 20:55:10 CEST 2004
262	pcg	1.22	- protocol version 0.1, compatible with older releases.
263			- do not RESET on out-of-sequence packets (good for wireless).
264			- various non-security-related bugfixes.
265			- c++ify (at least make it compile with g++-3.4, which should make
266			it a little bit more standard c++).
267	pcg	1.19
268	pcg	1.18	1.5 Fri Jan 30 00:50:04 CET 2004
269	pcg	1.22	- protocol version 0.1, compatible with older releases.
270			- vped will refuse to start when hostkey and public key do not match.
271			- updated lzf code to version 1.2.
272			- better error reporting for "unusual" conditions, like failing
273			to allocate memory, that should not normally happen and
274			will otherwise result in spurious other error messages. Also
275			adds paranoid checks in case openssl's API changes in a bad way.
276			- fix a bug where queued vpn packets were cleared to zero. while
277			this doesn't affect security, it did cause warning messages and
278			unnecessary connectivity delays.
279	pcg	1.15
280	pcg	1.13	1.4 Sat Jan 17 15:49:21 CET 2004
281	pcg	1.22	- protocol version 0.1, compatible with older releases.
282			- better retry behaviour on key mismatch.
283			- use select-based io_manager instead of poll-based one.
284			- share io manager between rxvt-unicode and vpe.
285			- sooo many *BSD workarounds because no BSD I could find is even
286			remotely POSIX-compatible.
287	pcg	1.11
288	pcg	1.10	1.2 Fri Oct 17 03:44:44 CEST 2003
289	pcg	1.22	- protocol version 0.1.
290			- tincd kernel interface code imported, more supported platforms
291			(native/linux (2.4), tincd/linux (2.2 and 2.4), tincd/freebsd,
292			native/cygwin).
293			- added primitive ethernet emulation (ipv4 only), which allows
294			the following platforms that only have tun drivers to work:
295			/* none yet tested */
296			- portability workarounds, especially for unfriendly freebsd
297			- very minor bugfixes
298			- warnings when choosing insecure ciphers/hashes
299			- reduced default hmac length to 8.
300			- cvs now contains configure, Makefile.in and other generated files.
301			- added doc/complex-example to the distribution.
302
303			1.0 distant past
304			- protocol version 0.1.
305			- tweaked various timeouts to help very slow (486) class
306			machines or nets with many hosts.
307			- tweaked rate-limiting to be more forgiving for hosts
308			connecting through routers (not a fix).
309	pcg	1.2