[ViewVC] Annotation of: cvs/gvpe/NEWS

GVPE NEWS

TODO: bridge mode, finally?
TODO: gcm mode?
TODO: replace ripemd160 as the only authentication hash.
TODO: increase rsa size.
TODO: replace transport bits by transport endpoint structs?
TODO: http://incog-izick.blogspot.de/2011/08/using-openssl-aes-gcm.html
TODO: http://stackoverflow.com/questions/12153009/openssl-c-example-of-aes-gcm-using-evp-interfaces

TODO: verify
TODO: make sense of overhead calculation
TODO: if-up &c should not be scripts?
TODO: ipv6
TODO: gvpectrl should not use default privatekey,. or maybe document it better
        - INCOMPATIBLE CHANGE: core protocol version 1.0.
        - INCOMPATIBLE CHANGE: node sections are now introduced
          with "node nodename", not "node = nodename".
        - add workaround for temporary/rare ENOBUFS condition.
        - while individual packets couldn't be replayed, a whole session
          could be replayed - this has been fixed by an extra key exchange.
        - fix a delete vs. delete [] mismatch in the central logging function.
        - in addition to rsa key exchange and authentication, the handshake now
          adds a diffie-hellman key exchange (using curve25119) for perfect
          forward secrecy. mac and cipher keys are derived using HKDF.
        - rsa key sizes are now configurable and larger (default is 3072).
          correspondingly, the minimum mtu is no longer 296 but 576.
        - fixed a potential (unverified) buffer overrun on rsa decryption.
        - new per-node low-power setting that tries to reduce cpu/network usage.
        - router reconnects could cause excessive rekeying on other connections.
        - gvpectrl no longer generates all missing public keys, but
          only missing private keys. private keys are also put
          into the configured location.
        - the pid-file now accepts %s as nodename as elsewhere.
        - switch to counter mode (only aes supported at the moment in
          openssl). this gets rid of the need to generate a random iv,
          is likely more secure (and, as a side effect, gets rid of
          slow randomness generation. counter mode is often faster
          then cbc mode as well, and packets are smaller).
        - no longer use RAND_bytes to generate session keys - you NEED
          a real source of entropy now (e.g. egd or /dev/random - see the
          openssl documentation).
        - multiple node statements for the same node are now supported
          and will be merged.
        - a new directive "global" switches back to the global section
          of the config file.
        - if-up scripts can now be specified with absolute paths.
        - new global option: serial, to detect configuration mismatches.
        - use HKDF as authentication proof, not HMAC or a plain hash
          (hint by Ilmari Karonen).
        - during rekeying or conenction establishments, hmac authentication
          errors could occur and reset the connection. Transient hmac
          authentication errors are now being ignored for 3 seconds.
        - log the reason for a conneciton loss.
        - use a (hopefully) constant time memcmp to compare internal secrets.
        - fix a (harmless) errornous out of bounds stack read that would trigger
          gcc's -fsanitize=address.
        - bump old packet window size from 512 to 65536.
          
2.25 Sat Jul 13 06:42:33 CEST 2013
        - INCOMPATIBLE CHANGE: no longer enable udp protocol if no other
          protocols are enabled - this is necessary when you have nodes with
          completely unknown protocols, to force mediated connection requests.
        - INCOMPATIBLE CHANGE: dns transport protocol bumped to version 2.
        - core protocol version 0.1, compatible with older releases.
        - switch to using RSA_generate_key_ex, which is the badly documented
          and needlessly more complicated replacement for the RSA_generate_key
          function which is now deprecated.
        - support additional hmac hashes: sha256 and sha512, usually truncated.
        - change public exponent for rsa keys from 65535 to 65537, for
          efficiency reasons - only affects new keys.
        - nodes would sometimes declare transport endpoints valid despite
          the protocol not being configured locally.
        - new global configuration options: chroot, chuser, chuid, chgid,
          to chroot to a specified or anonymous new root, and change user id.
        - new global configuration options seed_device and seed_interval,
          to configure another device than /dev/urandom for random seeds,
          and to configure a regular interval to reseed the rng.
        - prefer inet_aton over gethostbyname, as the latter is not guaranteed
          to "resolve" literal ip addresses.
        - configure didn't detect openssl 1.0 because SHA1_version became private
          (patch by TANIGUCHI Takaki).
        - fix a bug where nodes would tell the other side that it supports
          the same protocols as that other side, instead of its own.
        - add zlib when found, as openssl depends on it in newer versions.
        - work around append-bugs in uclibc by using an extra seek.
        - new "include" directive for the config file.
        - gvpectrl no longer evaluates any "on" directives.
        - icmp and rawip protocols weren't upgradable to each other.
        - major, but incremental, dns transport improvements:
           - do not simply abort in some error cases in the dns transport,
             but try to recover.
           - allow lowercase/uppercase aliases for base-n encodings that do
             not rely on case.
           - use base26 instead of base22 encoding for dns syn's, and
             base36 instead of base22 for headers (saves one byte/packet).
           - back off far quicker in dns tunnel when idling - increases
             latency on an idle link somewhat, but avoids hundreds of
             needless packets.
           - poll more aggressively when idling in dns (poll once per
             second as opposed to once per 5 seconds).
           - reduce dns send payload size to allow greater rate of ack
             messages (should help sack and ipv6).
        - allow for ip options in rawip/icmp transports, even though gvpe
          doesn't generate them.
        - upgrade to autoconf 2.69, automake 1.11.
        - upgrade to libev 4 API.
        - replace COPYING file by actual GPLv3 - files were relicensed to GPLv3
          earlier but COPYING was forgotten.

2.24 Sat Feb 12 05:15:48 CET 2011
        - protocol version 0.1, compatible with older releases.
        - due to a bug, when packets were lost, a connection could go into a
          state where a ping/connection request from another node would be
          ignored, leading to connections not being re-established.
        - due to a bug, compression was almost always enabled.
        - enable-max-mtu was actually enable-mtu, contrary to documentation.
        - add nfmark support.
        - add node-change script support.
        - new DESTSI variable for node-xxx scripts.
        - updated codingstyle a bit, declared truly static stuff as static.
        - clarify compression docs.

2.22 Sun Feb  1 17:25:28 CET 2009
        - protocol version 0.1, compatible with older releases.
        - enabled icmp/tcp/http-proxy protocols by default.
        - updated copyright in program greetings.
        - fix some configure messages.
        - updated to libev 3.52.

2.21 Wed Sep  3 06:56:27 CEST 2008
        - protocol version 0.1, compatible with older releases.
        - add missing ev++.h include header to tarball, which everybody
          who tested it apparently had in their include path :(. Caught
          by Karl Kleinpaste and Marcus Kong.

2.2  Mon Sep  1 06:28:09 CEST 2008
        - protocol version 0.1, compatible with older releases.
          but upgrade is recommended to due changed ondemand behaviour.
        - new per-node options max-ttl and max-queue.
        - convert from iom.C to libev, a high-performance event loop
          (http://software.schmorp.de/pkg/libev).
        - tcp connections were leaking in some cases.
        - retry more aggressively (once/s) to establish a connection if
          new packets arrive for it.
        - save a lot of setsockopt calls when the tos doesn't change.
        - honor disabled even on initial connect attempt.
        - changed callback mechanism to be slightly less portable
          but more efficient mechanism (standards-compliant c++ compilers
          should work).
        - increased receive window positive size, to allow for massive
          packet loss due to occasional longer drop-outs.
        - send RST when a positive window size violation is detected, but
          not in other cases, to reconnect more quickly.
        - upgraded liblzf to version 3.4.
        - dropped -fno-exceptions due to ev++.h using it.
        - node-up/down scripts are now run in sequence.
        - new -q switch for gvpectrl, for when you run it often.
        - work around the horribly inconsistent, ad-hoc, ever-changing
          and broken texinfo syntax. YMMV. avoid texinfo.
        - keepalive is more aggressive now, sensding ping's every 3 seconds
          and killing the conenction after 15 seconds.
        - bugfixes.

2.01 Thu Mar 29 19:26:04 CEST 2007
        - protocol version 0.1, compatible with older releases.
        - bugfix of callback.h, might have cause callback return values to
          be corrupted on architectures like sparc before.
        - dns transport retries more aggressively.
        - updated documentation, improved dns transport reliability
          and throughput.
        - added experimental support for sha256 and sha512 digests.

2.0 Mon Dec  5 13:59:26 CET 2005
        - protocol version 0.1, compatible with older releases.
        - implement allow-direct, deny-direct node config statements.
        - implemented != for sockinfo. This fixes a bug where
          gvpe sent packets to the old ip address of another host
          even though it had received packets from it's new address.
          This only causes problems if you forget to -HUP your gvpe after
          your ip address changed, which is *required*.
        - sets close-on-exec flag on tcp connections. This fixes a bug
          where child processes kept tcp connections open and caused
          connections to fail when only one side can connect.
        - fixed a bug in receive sequence checking that made gvpe
          accept out-of-window packets in most cases.
        - tighter limit for the maximum sequence # to avoid overflow
          conditions + allow more headroom for packet reordering.
        - replace some asserts that trapped config mismatches by
          more useful log messages.
        - fix spurious extra newline in some log messages.

1.9 Tue Apr 19 06:21:50 CEST 2005
        - protocol version 0.1, compatible with older releases.
        - WARNING: this version checks the return value of if-up etc.
          scripts and exits on failure.
        - IMPORTANT: run if-up/node-up etc. scripts via /bin/sh.
        - IMPORTANT: interface initialization (MAC, MTU) is now done
          automatically in most configurations.
        - options can now be specified on the gvpe command line, too.
        - make some DNS transport values configurable and document them.
        - improved OS specific information in gvpe.osdep(5).
        - new tap device type "native/darwin", that supports the tap
          driver available for darwin (thanks to matthew mead who tested
          it out with me in a long session). tincd/darwin is still available.
        - new device type "tincd/bsd", which is a newer version of the
          *bsd-drivers taken from tinc.
        - fixed a bug in relying on the order of global construction
          when tcp transport was enabled. The fix makes it use no
          cpu time unless it is in use, too.
        - information about other nodes is now available to if-up etc. scripts.
        - the value of the config variable if-up-data is passed to the if-up
          etc. scripts.
        - skip unparsable config lines with a warning instead of stopping
          parsing and continuing with a certainly unusable config.

1.8 Fri Mar 18 00:58:55 CET 2005
        - protocol version 0.1, compatible with older releases.
        - enable-udp = yes is now default only when no other protocols
          are enabled. otherwise it is disabled unless explicitly enabled.
        - implemented dns tunneling (experimental now and in the future).
        - remove support for pre-release version protocol.
        - updated tincd drivers (rev 1433), added uml_socket driver, documented
          tincd drivers a bit better.
        - document icmp configuration values.
        - document transport protocols in gvpe.protocol(7).
        - remove unused ChangeLog file.
        - created a mailinglist at gvpe@lists.schmorp.de.
        - added an exemption to allow distribution of binaries linked against
          OpenSSL, as suggested by Guus Sliepen (author of tinc). No
          GNUTLS conversion in sight.
        - some portability fixes with respect to --disable-nls.

1.7 Tue Feb 22 23:58:59 CET 2005
        - protocol version 0.1, compatible with older releases.
        - first gnu release.
        - documented the special value 1 for router-priority.
        - renamed vped => gvpe and vpectrl => gvpectrl, as well as
          vped.conf => gvpe.conf.
        - new per-node option "max-retry".
        - asymmetric rekeying behaviour, so hosts don't rekey simultaneously.
        - new configure option --enable-static-daemon.
        - fix configure --help output.
        - many documentation layout fixes.
        - synced iom.[Ch] from rxvt-unicode.
        - try to cope with some non-monotonic time changes.
        - revert to locale.h - a usual, clocale is nonfunctioning on macosx.
        - considerably improved pod2texi and the resulting texi doc.

1.6.1 Wed May 12 14:48:20 CEST 2004
        - protocol version 0.1, compatible with older releases.
        - fix -c switch that has been broken due to a last-minute fix
          to option and config file parsing.

1.6 Mon May 10 20:55:10 CEST 2004
        - protocol version 0.1, compatible with older releases.
        - do not RESET on out-of-sequence packets (good for wireless).
        - various non-security-related bugfixes.
        - c++ify (at least make it compile with g++-3.4, which should make
          it a little bit more standard c++).

1.5 Fri Jan 30 00:50:04 CET 2004
        - protocol version 0.1, compatible with older releases.
        - vped will refuse to start when hostkey and public key do not match.
        - updated lzf code to version 1.2.
        - better error reporting for "unusual" conditions, like failing
          to allocate memory, that should not normally happen and
          will otherwise result in spurious other error messages. Also
          adds paranoid checks in case openssl's API changes in a bad way.
        - fix a bug where queued vpn packets were cleared to zero. while
          this doesn't affect security, it did cause warning messages and
          unnecessary connectivity delays.

1.4 Sat Jan 17 15:49:21 CET 2004
        - protocol version 0.1, compatible with older releases.
        - better retry behaviour on key mismatch.
        - use select-based io_manager instead of poll-based one.
        - share io manager between rxvt-unicode and vpe.
        - sooo many *BSD workarounds because no BSD I could find is even
          remotely POSIX-compatible.

1.2 Fri Oct 17 03:44:44 CEST 2003
        - protocol version 0.1.
        - tincd kernel interface code imported, more supported platforms
          (native/linux (2.4), tincd/linux (2.2 and 2.4), tincd/freebsd,
          native/cygwin).
        - added primitive ethernet emulation (ipv4 only), which allows
          the following platforms that only have tun drivers to work:
          /* none yet tested */
        - portability workarounds, especially for unfriendly freebsd
        - very minor bugfixes
        - warnings when choosing insecure ciphers/hashes
        - reduced default hmac length to 8.
        - cvs now contains configure, Makefile.in and other generated files.
        - added doc/complex-example to the distribution.

1.0 distant past
        - protocol version 0.1.
        - tweaked various timeouts to help very slow (486) class
          machines or nets with many hosts.
        - tweaked rate-limiting to be more forgiving for hosts
          connecting through routers (not a fix).

Revision:	1.129
Committed:	Wed Mar 30 04:02:50 2016 UTC (8 years, 1 month ago) by root
Branch:	MAIN
Changes since 1.128:	+1 -0 lines
Log Message:	* empty log message *
#	User	Rev	Content
1	pcg	1.83	GVPE NEWS
2	pcg	1.57
3	root	1.106	TODO: bridge mode, finally?
4	root	1.112	TODO: gcm mode?
5			TODO: replace ripemd160 as the only authentication hash.
6			TODO: increase rsa size.
7	root	1.114	TODO: replace transport bits by transport endpoint structs?
8			TODO: http://incog-izick.blogspot.de/2011/08/using-openssl-aes-gcm.html
9			TODO: http://stackoverflow.com/questions/12153009/openssl-c-example-of-aes-gcm-using-evp-interfaces
10
11	root	1.116	TODO: verify
12			TODO: make sense of overhead calculation
13	root	1.117	TODO: if-up &c should not be scripts?
14	root	1.121	TODO: ipv6
15	root	1.122	TODO: gvpectrl should not use default privatekey,. or maybe document it better
16	root	1.114	- INCOMPATIBLE CHANGE: core protocol version 1.0.
17	root	1.123	- INCOMPATIBLE CHANGE: node sections are now introduced
18	root	1.116	with "node nodename", not "node = nodename".
19	root	1.128	- add workaround for temporary/rare ENOBUFS condition.
20	root	1.114	- while individual packets couldn't be replayed, a whole session
21			could be replayed - this has been fixed by an extra key exchange.
22	root	1.126	- fix a delete vs. delete [] mismatch in the central logging function.
23	root	1.114	- in addition to rsa key exchange and authentication, the handshake now
24			adds a diffie-hellman key exchange (using curve25119) for perfect
25			forward secrecy. mac and cipher keys are derived using HKDF.
26			- rsa key sizes are now configurable and larger (default is 3072).
27			correspondingly, the minimum mtu is no longer 296 but 576.
28			- fixed a potential (unverified) buffer overrun on rsa decryption.
29	root	1.120	- new per-node low-power setting that tries to reduce cpu/network usage.
30	root	1.119	- router reconnects could cause excessive rekeying on other connections.
31	root	1.114	- gvpectrl no longer generates all missing public keys, but
32			only missing private keys. private keys are also put
33			into the configured location.
34			- the pid-file now accepts %s as nodename as elsewhere.
35	root	1.124	- switch to counter mode (only aes supported at the moment in
36			openssl). this gets rid of the need to generate a random iv,
37			is likely more secure (and, as a side effect, gets rid of
38			slow randomness generation. counter mode is often faster
39	root	1.125	then cbc mode as well, and packets are smaller).
40	root	1.115	- no longer use RAND_bytes to generate session keys - you NEED
41			a real source of entropy now (e.g. egd or /dev/random - see the
42			openssl documentation).
43	root	1.116	- multiple node statements for the same node are now supported
44			and will be merged.
45			- a new directive "global" switches back to the global section
46			of the config file.
47			- if-up scripts can now be specified with absolute paths.
48	root	1.117	- new global option: serial, to detect configuration mismatches.
49	root	1.118	- use HKDF as authentication proof, not HMAC or a plain hash
50			(hint by Ilmari Karonen).
51	root	1.119	- during rekeying or conenction establishments, hmac authentication
52			errors could occur and reset the connection. Transient hmac
53			authentication errors are now being ignored for 3 seconds.
54			- log the reason for a conneciton loss.
55	root	1.121	- use a (hopefully) constant time memcmp to compare internal secrets.
56	root	1.127	- fix a (harmless) errornous out of bounds stack read that would trigger
57			gcc's -fsanitize=address.
58	root	1.129	- bump old packet window size from 512 to 65536.
59	root	1.116
60	root	1.114	2.25 Sat Jul 13 06:42:33 CEST 2013
61	root	1.97	- INCOMPATIBLE CHANGE: no longer enable udp protocol if no other
62			protocols are enabled - this is necessary when you have nodes with
63			completely unknown protocols, to force mediated connection requests.
64	root	1.99	- INCOMPATIBLE CHANGE: dns transport protocol bumped to version 2.
65	root	1.112	- core protocol version 0.1, compatible with older releases.
66	root	1.110	- switch to using RSA_generate_key_ex, which is the badly documented
67	root	1.108	and needlessly more complicated replacement for the RSA_generate_key
68			function which is now deprecated.
69	root	1.112	- support additional hmac hashes: sha256 and sha512, usually truncated.
70	root	1.108	- change public exponent for rsa keys from 65535 to 65537, for
71	root	1.110	efficiency reasons - only affects new keys.
72	root	1.105	- nodes would sometimes declare transport endpoints valid despite
73			the protocol not being configured locally.
74	root	1.106	- new global configuration options: chroot, chuser, chuid, chgid,
75			to chroot to a specified or anonymous new root, and change user id.
76	root	1.112	- new global configuration options seed_device and seed_interval,
77			to configure another device than /dev/urandom for random seeds,
78	root	1.116	and to configure a regular interval to reseed the rng.
79	root	1.107	- prefer inet_aton over gethostbyname, as the latter is not guaranteed
80			to "resolve" literal ip addresses.
81	root	1.102	- configure didn't detect openssl 1.0 because SHA1_version became private
82			(patch by TANIGUCHI Takaki).
83	root	1.97	- fix a bug where nodes would tell the other side that it supports
84			the same protocols as that other side, instead of its own.
85	root	1.98	- add zlib when found, as openssl depends on it in newer versions.
86			- work around append-bugs in uclibc by using an extra seek.
87	root	1.99	- new "include" directive for the config file.
88	root	1.100	- gvpectrl no longer evaluates any "on" directives.
89	root	1.102	- icmp and rawip protocols weren't upgradable to each other.
90	root	1.99	- major, but incremental, dns transport improvements:
91			- do not simply abort in some error cases in the dns transport,
92			but try to recover.
93	root	1.116	- allow lowercase/uppercase aliases for base-n encodings that do
94	root	1.99	not rely on case.
95			- use base26 instead of base22 encoding for dns syn's, and
96			base36 instead of base22 for headers (saves one byte/packet).
97			- back off far quicker in dns tunnel when idling - increases
98			latency on an idle link somewhat, but avoids hundreds of
99			needless packets.
100			- poll more aggressively when idling in dns (poll once per
101			second as opposed to once per 5 seconds).
102	root	1.104	- reduce dns send payload size to allow greater rate of ack
103			messages (should help sack and ipv6).
104	root	1.103	- allow for ip options in rawip/icmp transports, even though gvpe
105			doesn't generate them.
106	root	1.113	- upgrade to autoconf 2.69, automake 1.11.
107	root	1.101	- upgrade to libev 4 API.
108	root	1.113	- replace COPYING file by actual GPLv3 - files were relicensed to GPLv3
109			earlier but COPYING was forgotten.
110	root	1.97
111			2.24 Sat Feb 12 05:15:48 CET 2011
112			- protocol version 0.1, compatible with older releases.
113	root	1.95	- due to a bug, when packets were lost, a connection could go into a
114	root	1.94	state where a ping/connection request from another node would be
115	root	1.96	ignored, leading to connections not being re-established.
116	pcg	1.93	- due to a bug, compression was almost always enabled.
117	pcg	1.92	- enable-max-mtu was actually enable-mtu, contrary to documentation.
118	pcg	1.90	- add nfmark support.
119	pcg	1.91	- add node-change script support.
120			- new DESTSI variable for node-xxx scripts.
121	root	1.95	- updated codingstyle a bit, declared truly static stuff as static.
122	root	1.96	- clarify compression docs.
123	pcg	1.90
124	pcg	1.89	2.22 Sun Feb 1 17:25:28 CET 2009
125	root	1.97	- protocol version 0.1, compatible with older releases.
126	pcg	1.86	- enabled icmp/tcp/http-proxy protocols by default.
127	pcg	1.85	- updated copyright in program greetings.
128	pcg	1.86	- fix some configure messages.
129	pcg	1.87	- updated to libev 3.52.
130	pcg	1.85
131	pcg	1.84	2.21 Wed Sep 3 06:56:27 CEST 2008
132	root	1.97	- protocol version 0.1, compatible with older releases.
133	pcg	1.84	- add missing ev++.h include header to tarball, which everybody
134			who tested it apparently had in their include path :(. Caught
135	pcg	1.85	by Karl Kleinpaste and Marcus Kong.
136	pcg	1.84
137	pcg	1.83	2.2 Mon Sep 1 06:28:09 CEST 2008
138	root	1.97	- protocol version 0.1, compatible with older releases.
139	pcg	1.78	but upgrade is recommended to due changed ondemand behaviour.
140			- new per-node options max-ttl and max-queue.
141	pcg	1.72	- convert from iom.C to libev, a high-performance event loop
142	pcg	1.71	(http://software.schmorp.de/pkg/libev).
143	pcg	1.73	- tcp connections were leaking in some cases.
144	pcg	1.78	- retry more aggressively (once/s) to establish a connection if
145			new packets arrive for it.
146	pcg	1.75	- save a lot of setsockopt calls when the tos doesn't change.
147	pcg	1.78	- honor disabled even on initial connect attempt.
148	pcg	1.76	- changed callback mechanism to be slightly less portable
149			but more efficient mechanism (standards-compliant c++ compilers
150			should work).
151	pcg	1.80	- increased receive window positive size, to allow for massive
152			packet loss due to occasional longer drop-outs.
153			- send RST when a positive window size violation is detected, but
154			not in other cases, to reconnect more quickly.
155	pcg	1.83	- upgraded liblzf to version 3.4.
156	pcg	1.77	- dropped -fno-exceptions due to ev++.h using it.
157	pcg	1.81	- node-up/down scripts are now run in sequence.
158			- new -q switch for gvpectrl, for when you run it often.
159	pcg	1.82	- work around the horribly inconsistent, ad-hoc, ever-changing
160			and broken texinfo syntax. YMMV. avoid texinfo.
161	pcg	1.83	- keepalive is more aggressive now, sensding ping's every 3 seconds
162			and killing the conenction after 15 seconds.
163	pcg	1.71	- bugfixes.
164
165	pcg	1.70	2.01 Thu Mar 29 19:26:04 CEST 2007
166	pcg	1.69	- protocol version 0.1, compatible with older releases.
167	pcg	1.68	- bugfix of callback.h, might have cause callback return values to
168			be corrupted on architectures like sparc before.
169	pcg	1.69	- dns transport retries more aggressively.
170	pcg	1.70	- updated documentation, improved dns transport reliability
171			and throughput.
172			- added experimental support for sha256 and sha512 digests.
173	pcg	1.67
174	pcg	1.66	2.0 Mon Dec 5 13:59:26 CET 2005
175	pcg	1.56	- protocol version 0.1, compatible with older releases.
176	pcg	1.65	- implement allow-direct, deny-direct node config statements.
177	pcg	1.59	- implemented != for sockinfo. This fixes a bug where
178			gvpe sent packets to the old ip address of another host
179			even though it had received packets from it's new address.
180	pcg	1.61	This only causes problems if you forget to -HUP your gvpe after
181	pcg	1.59	your ip address changed, which is required.
182	pcg	1.64	- sets close-on-exec flag on tcp connections. This fixes a bug
183			where child processes kept tcp connections open and caused
184			connections to fail when only one side can connect.
185			- fixed a bug in receive sequence checking that made gvpe
186			accept out-of-window packets in most cases.
187	pcg	1.61	- tighter limit for the maximum sequence # to avoid overflow
188			conditions + allow more headroom for packet reordering.
189	pcg	1.66	- replace some asserts that trapped config mismatches by
190	pcg	1.62	more useful log messages.
191	pcg	1.63	- fix spurious extra newline in some log messages.
192	pcg	1.56
193	pcg	1.55	1.9 Tue Apr 19 06:21:50 CEST 2005
194	pcg	1.56	- protocol version 0.1, compatible with older releases.
195	pcg	1.49	- WARNING: this version checks the return value of if-up etc.
196			scripts and exits on failure.
197	pcg	1.50	- IMPORTANT: run if-up/node-up etc. scripts via /bin/sh.
198			- IMPORTANT: interface initialization (MAC, MTU) is now done
199			automatically in most configurations.
200	pcg	1.54	- options can now be specified on the gvpe command line, too.
201	pcg	1.49	- make some DNS transport values configurable and document them.
202			- improved OS specific information in gvpe.osdep(5).
203	pcg	1.51	- new tap device type "native/darwin", that supports the tap
204	pcg	1.45	driver available for darwin (thanks to matthew mead who tested
205	pcg	1.47	it out with me in a long session). tincd/darwin is still available.
206	pcg	1.51	- new device type "tincd/bsd", which is a newer version of the
207			*bsd-drivers taken from tinc.
208	pcg	1.46	- fixed a bug in relying on the order of global construction
209			when tcp transport was enabled. The fix makes it use no
210			cpu time unless it is in use, too.
211	pcg	1.52	- information about other nodes is now available to if-up etc. scripts.
212			- the value of the config variable if-up-data is passed to the if-up
213			etc. scripts.
214	pcg	1.49	- skip unparsable config lines with a warning instead of stopping
215			parsing and continuing with a certainly unusable config.
216	pcg	1.43
217	pcg	1.41	1.8 Fri Mar 18 00:58:55 CET 2005
218	pcg	1.56	- protocol version 0.1, compatible with older releases.
219	pcg	1.36	- enable-udp = yes is now default only when no other protocols
220			are enabled. otherwise it is disabled unless explicitly enabled.
221	pcg	1.40	- implemented dns tunneling (experimental now and in the future).
222	pcg	1.39	- remove support for pre-release version protocol.
223	pcg	1.41	- updated tincd drivers (rev 1433), added uml_socket driver, documented
224			tincd drivers a bit better.
225	pcg	1.40	- document icmp configuration values.
226			- document transport protocols in gvpe.protocol(7).
227			- remove unused ChangeLog file.
228	pcg	1.41	- created a mailinglist at gvpe@lists.schmorp.de.
229			- added an exemption to allow distribution of binaries linked against
230			OpenSSL, as suggested by Guus Sliepen (author of tinc). No
231			GNUTLS conversion in sight.
232	pcg	1.42	- some portability fixes with respect to --disable-nls.
233	pcg	1.36
234	pcg	1.35	1.7 Tue Feb 22 23:58:59 CET 2005
235	pcg	1.32	- protocol version 0.1, compatible with older releases.
236	pcg	1.26	- first gnu release.
237	pcg	1.27	- documented the special value 1 for router-priority.
238	pcg	1.26	- renamed vped => gvpe and vpectrl => gvpectrl, as well as
239			vped.conf => gvpe.conf.
240	pcg	1.29	- new per-node option "max-retry".
241	pcg	1.22	- asymmetric rekeying behaviour, so hosts don't rekey simultaneously.
242	pcg	1.24	- new configure option --enable-static-daemon.
243	pcg	1.23	- fix configure --help output.
244	pcg	1.26	- many documentation layout fixes.
245	pcg	1.28	- synced iom.[Ch] from rxvt-unicode.
246	pcg	1.34	- try to cope with some non-monotonic time changes.
247	pcg	1.30	- revert to locale.h - a usual, clocale is nonfunctioning on macosx.
248	pcg	1.32	- considerably improved pod2texi and the resulting texi doc.
249	pcg	1.22
250	pcg	1.21	1.6.1 Wed May 12 14:48:20 CEST 2004
251	pcg	1.32	- protocol version 0.1, compatible with older releases.
252	pcg	1.22	- fix -c switch that has been broken due to a last-minute fix
253			to option and config file parsing.
254	pcg	1.21
255	pcg	1.20	1.6 Mon May 10 20:55:10 CEST 2004
256	pcg	1.22	- protocol version 0.1, compatible with older releases.
257			- do not RESET on out-of-sequence packets (good for wireless).
258			- various non-security-related bugfixes.
259			- c++ify (at least make it compile with g++-3.4, which should make
260			it a little bit more standard c++).
261	pcg	1.19
262	pcg	1.18	1.5 Fri Jan 30 00:50:04 CET 2004
263	pcg	1.22	- protocol version 0.1, compatible with older releases.
264			- vped will refuse to start when hostkey and public key do not match.
265			- updated lzf code to version 1.2.
266			- better error reporting for "unusual" conditions, like failing
267			to allocate memory, that should not normally happen and
268			will otherwise result in spurious other error messages. Also
269			adds paranoid checks in case openssl's API changes in a bad way.
270			- fix a bug where queued vpn packets were cleared to zero. while
271			this doesn't affect security, it did cause warning messages and
272			unnecessary connectivity delays.
273	pcg	1.15
274	pcg	1.13	1.4 Sat Jan 17 15:49:21 CET 2004
275	pcg	1.22	- protocol version 0.1, compatible with older releases.
276			- better retry behaviour on key mismatch.
277			- use select-based io_manager instead of poll-based one.
278			- share io manager between rxvt-unicode and vpe.
279			- sooo many *BSD workarounds because no BSD I could find is even
280			remotely POSIX-compatible.
281	pcg	1.11
282	pcg	1.10	1.2 Fri Oct 17 03:44:44 CEST 2003
283	pcg	1.22	- protocol version 0.1.
284			- tincd kernel interface code imported, more supported platforms
285			(native/linux (2.4), tincd/linux (2.2 and 2.4), tincd/freebsd,
286			native/cygwin).
287			- added primitive ethernet emulation (ipv4 only), which allows
288			the following platforms that only have tun drivers to work:
289			/* none yet tested */
290			- portability workarounds, especially for unfriendly freebsd
291			- very minor bugfixes
292			- warnings when choosing insecure ciphers/hashes
293			- reduced default hmac length to 8.
294			- cvs now contains configure, Makefile.in and other generated files.
295			- added doc/complex-example to the distribution.
296
297			1.0 distant past
298			- protocol version 0.1.
299			- tweaked various timeouts to help very slow (486) class
300			machines or nets with many hosts.
301			- tweaked rate-limiting to be more forgiving for hosts
302			connecting through routers (not a fix).
303	pcg	1.2